mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-08-20 12:11:31 +03:00
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14350 3c298f89-4303-0410-b956-a3cf2f4a3e73
670 lines
24 KiB
Diff
670 lines
24 KiB
Diff
Index: linux-2.6.28.2/drivers/ssb/Makefile
|
|
===================================================================
|
|
--- linux-2.6.28.2.orig/drivers/ssb/Makefile 2009-02-01 13:09:04.000000000 +0100
|
|
+++ linux-2.6.28.2/drivers/ssb/Makefile 2009-02-01 13:09:31.000000000 +0100
|
|
@@ -9,6 +9,7 @@ ssb-$(CONFIG_SSB_PCMCIAHOST) += pcmcia.
|
|
|
|
# built-in drivers
|
|
ssb-y += driver_chipcommon.o
|
|
+ssb-y += driver_chipcommon_pmu.o
|
|
ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
|
|
ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
|
|
ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
|
|
Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c
|
|
===================================================================
|
|
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
|
|
+++ linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c 2009-02-01 21:16:15.000000000 +0100
|
|
@@ -0,0 +1,378 @@
|
|
+/*
|
|
+ * Sonics Silicon Backplane
|
|
+ * Broadcom ChipCommon Power Management Unit driver
|
|
+ *
|
|
+ * Copyright 2009, Michael Buesch <mb@bu3sch.de>
|
|
+ * Copyright 2007, Broadcom Corporation
|
|
+ *
|
|
+ * Licensed under the GNU/GPL. See COPYING for details.
|
|
+ */
|
|
+
|
|
+#include <linux/ssb/ssb.h>
|
|
+#include <linux/ssb/ssb_regs.h>
|
|
+#include <linux/ssb/ssb_driver_chipcommon.h>
|
|
+#include <linux/delay.h>
|
|
+
|
|
+#include "ssb_private.h"
|
|
+
|
|
+static u32 ssb_chipco_pll_read(struct ssb_chipcommon *cc, u32 offset)
|
|
+{
|
|
+ chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset);
|
|
+ return chipco_read32(cc, SSB_CHIPCO_PLLCTL_DATA);
|
|
+}
|
|
+
|
|
+static void ssb_chipco_pll_write(struct ssb_chipcommon *cc,
|
|
+ u32 offset, u32 value)
|
|
+{
|
|
+ chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset);
|
|
+ chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value);
|
|
+}
|
|
+
|
|
+struct pmu0_plltab_entry {
|
|
+ u16 freq; /* Crystal frequency in kHz.*/
|
|
+ u8 xf; /* Crystal frequency value for PMU control */
|
|
+ u8 wb_int;
|
|
+ u32 wb_frac;
|
|
+};
|
|
+
|
|
+static const struct pmu0_plltab_entry pmu0_plltab[] = {
|
|
+ { .freq = 12000, .xf = 1, .wb_int = 73, .wb_frac = 349525, },
|
|
+ { .freq = 13000, .xf = 2, .wb_int = 67, .wb_frac = 725937, },
|
|
+ { .freq = 14400, .xf = 3, .wb_int = 61, .wb_frac = 116508, },
|
|
+ { .freq = 15360, .xf = 4, .wb_int = 57, .wb_frac = 305834, },
|
|
+ { .freq = 16200, .xf = 5, .wb_int = 54, .wb_frac = 336579, },
|
|
+ { .freq = 16800, .xf = 6, .wb_int = 52, .wb_frac = 399457, },
|
|
+ { .freq = 19200, .xf = 7, .wb_int = 45, .wb_frac = 873813, },
|
|
+ { .freq = 19800, .xf = 8, .wb_int = 44, .wb_frac = 466033, },
|
|
+ { .freq = 20000, .xf = 9, .wb_int = 44, .wb_frac = 0, },
|
|
+ { .freq = 25000, .xf = 10, .wb_int = 70, .wb_frac = 419430, },
|
|
+ { .freq = 26000, .xf = 11, .wb_int = 67, .wb_frac = 725937, },
|
|
+ { .freq = 30000, .xf = 12, .wb_int = 58, .wb_frac = 699050, },
|
|
+ { .freq = 38400, .xf = 13, .wb_int = 45, .wb_frac = 873813, },
|
|
+ { .freq = 40000, .xf = 14, .wb_int = 45, .wb_frac = 0, },
|
|
+};
|
|
+#define SSB_PMU0_DEFAULT_XTALFREQ 20000
|
|
+
|
|
+static const struct pmu0_plltab_entry * pmu0_plltab_find_entry(u32 crystalfreq)
|
|
+{
|
|
+ const struct pmu0_plltab_entry *e;
|
|
+ unsigned int i;
|
|
+
|
|
+ for (i = 0; i < ARRAY_SIZE(pmu0_plltab); i++) {
|
|
+ e = &pmu0_plltab[i];
|
|
+ if (e->freq == crystalfreq)
|
|
+ return e;
|
|
+ }
|
|
+
|
|
+ return NULL;
|
|
+}
|
|
+
|
|
+/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */
|
|
+static void ssb_pmu0_pllinit_r0(struct ssb_chipcommon *cc,
|
|
+ u32 crystalfreq)
|
|
+{
|
|
+ struct ssb_bus *bus = cc->dev->bus;
|
|
+ const struct pmu0_plltab_entry *e = NULL;
|
|
+ u32 pmuctl, tmp, pllctl;
|
|
+ unsigned int i;
|
|
+
|
|
+ if ((bus->chip_id == 0x5354) && !crystalfreq) {
|
|
+ /* The 5354 crystal freq is 25MHz */
|
|
+ crystalfreq = 25000;
|
|
+ }
|
|
+ if (crystalfreq)
|
|
+ e = pmu0_plltab_find_entry(crystalfreq);
|
|
+ if (!e)
|
|
+ e = pmu0_plltab_find_entry(SSB_PMU0_DEFAULT_XTALFREQ);
|
|
+ BUG_ON(!e);
|
|
+ crystalfreq = e->freq;
|
|
+ cc->pmu.crystalfreq = e->freq;
|
|
+
|
|
+ /* Check if the PLL already is programmed to this frequency. */
|
|
+ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
|
|
+ if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) {
|
|
+ /* We're already there... */
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
|
|
+ (crystalfreq / 1000), (crystalfreq % 1000));
|
|
+
|
|
+ /* First turn the PLL off. */
|
|
+ switch (bus->chip_id) {
|
|
+ case 0x4328:
|
|
+ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
|
|
+ ~(1 << SSB_PLLRES_4328_BB_PLL_PU));
|
|
+ chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
|
|
+ ~(1 << SSB_PLLRES_4328_BB_PLL_PU));
|
|
+ break;
|
|
+ case 0x5354:
|
|
+ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
|
|
+ ~(1 << SSB_PLLRES_5354_BB_PLL_PU));
|
|
+ chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
|
|
+ ~(1 << SSB_PLLRES_5354_BB_PLL_PU));
|
|
+ break;
|
|
+ default:
|
|
+ SSB_WARN_ON(1);
|
|
+ }
|
|
+ for (i = 1500; i; i--) {
|
|
+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
|
|
+ if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT))
|
|
+ break;
|
|
+ udelay(10);
|
|
+ }
|
|
+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
|
|
+ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
|
|
+ ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
|
|
+
|
|
+ /* Set PDIV in PLL control 0. */
|
|
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
|
|
+ if (crystalfreq >= SSB_PMU0_PLLCTL0_PDIV_FREQ)
|
|
+ pllctl |= SSB_PMU0_PLLCTL0_PDIV_MSK;
|
|
+ else
|
|
+ pllctl &= ~SSB_PMU0_PLLCTL0_PDIV_MSK;
|
|
+ ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL0, pllctl);
|
|
+
|
|
+ /* Set WILD in PLL control 1. */
|
|
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL1);
|
|
+ pllctl &= ~SSB_PMU0_PLLCTL1_STOPMOD;
|
|
+ pllctl &= ~(SSB_PMU0_PLLCTL1_WILD_IMSK | SSB_PMU0_PLLCTL1_WILD_FMSK);
|
|
+ pllctl |= ((u32)e->wb_int << SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT) & SSB_PMU0_PLLCTL1_WILD_IMSK;
|
|
+ pllctl |= ((u32)e->wb_frac << SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT) & SSB_PMU0_PLLCTL1_WILD_FMSK;
|
|
+ if (e->wb_frac == 0)
|
|
+ pllctl |= SSB_PMU0_PLLCTL1_STOPMOD;
|
|
+ ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL1, pllctl);
|
|
+
|
|
+ /* Set WILD in PLL control 2. */
|
|
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL2);
|
|
+ pllctl &= ~SSB_PMU0_PLLCTL2_WILD_IMSKHI;
|
|
+ pllctl |= (((u32)e->wb_int >> 4) << SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT) & SSB_PMU0_PLLCTL2_WILD_IMSKHI;
|
|
+ ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL2, pllctl);
|
|
+
|
|
+ /* Set the crystalfrequency and the divisor. */
|
|
+ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
|
|
+ pmuctl &= ~SSB_CHIPCO_PMU_CTL_ILP_DIV;
|
|
+ pmuctl |= (((crystalfreq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT)
|
|
+ & SSB_CHIPCO_PMU_CTL_ILP_DIV;
|
|
+ pmuctl &= ~SSB_CHIPCO_PMU_CTL_XTALFREQ;
|
|
+ pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ;
|
|
+ chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl);
|
|
+}
|
|
+
|
|
+/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */
|
|
+static void ssb_pmu1_pllinit_r0(struct ssb_chipcommon *cc,
|
|
+ u32 crystalfreq)
|
|
+{
|
|
+ WARN_ON(1);
|
|
+ //TODO
|
|
+}
|
|
+
|
|
+static void ssb_pmu_pll_init(struct ssb_chipcommon *cc)
|
|
+{
|
|
+ struct ssb_bus *bus = cc->dev->bus;
|
|
+ u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */
|
|
+
|
|
+ if (bus->bustype == SSB_BUSTYPE_SSB) {
|
|
+ /* TODO: The user may override the crystal frequency. */
|
|
+ }
|
|
+
|
|
+ switch (bus->chip_id) {
|
|
+ case 0x4312:
|
|
+ case 0x4325:
|
|
+ ssb_pmu1_pllinit_r0(cc, crystalfreq);
|
|
+ break;
|
|
+ case 0x4328:
|
|
+ case 0x5354:
|
|
+ ssb_pmu0_pllinit_r0(cc, crystalfreq);
|
|
+ break;
|
|
+ default:
|
|
+ ssb_printk(KERN_ERR PFX
|
|
+ "ERROR: PLL init unknown for device %04X\n",
|
|
+ bus->chip_id);
|
|
+ }
|
|
+}
|
|
+
|
|
+struct pmu_res_updown_tab_entry {
|
|
+ u8 resource; /* The resource number */
|
|
+ u16 updown; /* The updown value */
|
|
+};
|
|
+
|
|
+enum pmu_res_depend_tab_task {
|
|
+ PMU_RES_DEP_SET = 1,
|
|
+ PMU_RES_DEP_ADD,
|
|
+ PMU_RES_DEP_REMOVE,
|
|
+};
|
|
+
|
|
+struct pmu_res_depend_tab_entry {
|
|
+ u8 resource; /* The resource number */
|
|
+ u8 task; /* SET | ADD | REMOVE */
|
|
+ u32 depend; /* The depend mask */
|
|
+};
|
|
+
|
|
+static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4328a0[] = {
|
|
+ { .resource = SSB_PLLRES_4328_EXT_SWITCHER_PWM, .updown = 0x0101, },
|
|
+ { .resource = SSB_PLLRES_4328_BB_SWITCHER_PWM, .updown = 0x1F01, },
|
|
+ { .resource = SSB_PLLRES_4328_BB_SWITCHER_BURST, .updown = 0x010F, },
|
|
+ { .resource = SSB_PLLRES_4328_BB_EXT_SWITCHER_BURST, .updown = 0x0101, },
|
|
+ { .resource = SSB_PLLRES_4328_ILP_REQUEST, .updown = 0x0202, },
|
|
+ { .resource = SSB_PLLRES_4328_RADIO_SWITCHER_PWM, .updown = 0x0F01, },
|
|
+ { .resource = SSB_PLLRES_4328_RADIO_SWITCHER_BURST, .updown = 0x0F01, },
|
|
+ { .resource = SSB_PLLRES_4328_ROM_SWITCH, .updown = 0x0101, },
|
|
+ { .resource = SSB_PLLRES_4328_PA_REF_LDO, .updown = 0x0F01, },
|
|
+ { .resource = SSB_PLLRES_4328_RADIO_LDO, .updown = 0x0F01, },
|
|
+ { .resource = SSB_PLLRES_4328_AFE_LDO, .updown = 0x0F01, },
|
|
+ { .resource = SSB_PLLRES_4328_PLL_LDO, .updown = 0x0F01, },
|
|
+ { .resource = SSB_PLLRES_4328_BG_FILTBYP, .updown = 0x0101, },
|
|
+ { .resource = SSB_PLLRES_4328_TX_FILTBYP, .updown = 0x0101, },
|
|
+ { .resource = SSB_PLLRES_4328_RX_FILTBYP, .updown = 0x0101, },
|
|
+ { .resource = SSB_PLLRES_4328_XTAL_PU, .updown = 0x0101, },
|
|
+ { .resource = SSB_PLLRES_4328_XTAL_EN, .updown = 0xA001, },
|
|
+ { .resource = SSB_PLLRES_4328_BB_PLL_FILTBYP, .updown = 0x0101, },
|
|
+ { .resource = SSB_PLLRES_4328_RF_PLL_FILTBYP, .updown = 0x0101, },
|
|
+ { .resource = SSB_PLLRES_4328_BB_PLL_PU, .updown = 0x0701, },
|
|
+};
|
|
+
|
|
+static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4328a0[] = {
|
|
+ {
|
|
+ /* Adjust ILP Request to avoid forcing EXT/BB into burst mode. */
|
|
+ .resource = SSB_PLLRES_4328_ILP_REQUEST,
|
|
+ .task = PMU_RES_DEP_SET,
|
|
+ .depend = ((1 << SSB_PLLRES_4328_EXT_SWITCHER_PWM) |
|
|
+ (1 << SSB_PLLRES_4328_BB_SWITCHER_PWM)),
|
|
+ },
|
|
+};
|
|
+
|
|
+static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4325a0[] = {
|
|
+ { .resource = SSB_PLLRES_4325_XTAL_PU, .updown = 0x1501, },
|
|
+};
|
|
+
|
|
+static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4325a0[] = {
|
|
+ {
|
|
+ /* Adjust HT-Available dependencies. */
|
|
+ .resource = SSB_PLLRES_4325_HT_AVAIL,
|
|
+ .task = PMU_RES_DEP_ADD,
|
|
+ .depend = ((1 << SSB_PLLRES_4325_RX_PWRSW_PU) |
|
|
+ (1 << SSB_PLLRES_4325_TX_PWRSW_PU) |
|
|
+ (1 << SSB_PLLRES_4325_LOGEN_PWRSW_PU) |
|
|
+ (1 << SSB_PLLRES_4325_AFE_PWRSW_PU)),
|
|
+ },
|
|
+};
|
|
+
|
|
+static void ssb_pmu_resources_init(struct ssb_chipcommon *cc)
|
|
+{
|
|
+ struct ssb_bus *bus = cc->dev->bus;
|
|
+ u32 min_msk = 0, max_msk = 0;
|
|
+ unsigned int i;
|
|
+ const struct pmu_res_updown_tab_entry *updown_tab = NULL;
|
|
+ unsigned int updown_tab_size;
|
|
+ const struct pmu_res_depend_tab_entry *depend_tab = NULL;
|
|
+ unsigned int depend_tab_size;
|
|
+
|
|
+ switch (bus->chip_id) {
|
|
+ case 0x4312:
|
|
+ /* We keep the default settings:
|
|
+ * min_msk = 0xCBB
|
|
+ * max_msk = 0x7FFFF
|
|
+ */
|
|
+ break;
|
|
+ case 0x4325:
|
|
+ /* Power OTP down later. */
|
|
+ min_msk = (1 << SSB_PLLRES_4325_CBUCK_BURST) |
|
|
+ (1 << SSB_PLLRES_4325_LNLDO2_PU);
|
|
+ if (chipco_read32(cc, SSB_CHIPCO_CHIPSTAT) &
|
|
+ SSB_CHIPCO_CHST_4325_PMUTOP_2B)
|
|
+ min_msk |= (1 << SSB_PLLRES_4325_CLDO_CBUCK_BURST);
|
|
+ /* The PLL may turn on, if it decides so. */
|
|
+ max_msk = 0xFFFFF;
|
|
+ updown_tab = pmu_res_updown_tab_4325a0;
|
|
+ updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4325a0);
|
|
+ depend_tab = pmu_res_depend_tab_4325a0;
|
|
+ depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4325a0);
|
|
+ break;
|
|
+ case 0x4328:
|
|
+ min_msk = (1 << SSB_PLLRES_4328_EXT_SWITCHER_PWM) |
|
|
+ (1 << SSB_PLLRES_4328_BB_SWITCHER_PWM) |
|
|
+ (1 << SSB_PLLRES_4328_XTAL_EN);
|
|
+ /* The PLL may turn on, if it decides so. */
|
|
+ max_msk = 0xFFFFF;
|
|
+ updown_tab = pmu_res_updown_tab_4328a0;
|
|
+ updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4328a0);
|
|
+ depend_tab = pmu_res_depend_tab_4328a0;
|
|
+ depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4328a0);
|
|
+ break;
|
|
+ case 0x5354:
|
|
+ /* The PLL may turn on, if it decides so. */
|
|
+ max_msk = 0xFFFFF;
|
|
+ break;
|
|
+ default:
|
|
+ ssb_printk(KERN_ERR PFX
|
|
+ "ERROR: PMU resource config unknown for device %04X\n",
|
|
+ bus->chip_id);
|
|
+ }
|
|
+
|
|
+ if (updown_tab) {
|
|
+ for (i = 0; i < updown_tab_size; i++) {
|
|
+ chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL,
|
|
+ updown_tab[i].resource);
|
|
+ chipco_write32(cc, SSB_CHIPCO_PMU_RES_UPDNTM,
|
|
+ updown_tab[i].updown);
|
|
+ }
|
|
+ }
|
|
+ if (depend_tab) {
|
|
+ for (i = 0; i < depend_tab_size; i++) {
|
|
+ chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL,
|
|
+ depend_tab[i].resource);
|
|
+ switch (depend_tab[i].task) {
|
|
+ case PMU_RES_DEP_SET:
|
|
+ chipco_write32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
|
|
+ depend_tab[i].depend);
|
|
+ break;
|
|
+ case PMU_RES_DEP_ADD:
|
|
+ chipco_set32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
|
|
+ depend_tab[i].depend);
|
|
+ break;
|
|
+ case PMU_RES_DEP_REMOVE:
|
|
+ chipco_mask32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
|
|
+ ~(depend_tab[i].depend));
|
|
+ break;
|
|
+ default:
|
|
+ SSB_WARN_ON(1);
|
|
+ }
|
|
+ }
|
|
+ }
|
|
+
|
|
+ /* Set the resource masks. */
|
|
+ if (min_msk)
|
|
+ chipco_write32(cc, SSB_CHIPCO_PMU_MINRES_MSK, min_msk);
|
|
+ if (max_msk)
|
|
+ chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk);
|
|
+}
|
|
+
|
|
+void ssb_pmu_init(struct ssb_chipcommon *cc)
|
|
+{
|
|
+ struct ssb_bus *bus = cc->dev->bus;
|
|
+ u32 pmucap;
|
|
+
|
|
+if (bus->chip_id != 0x5354) return; //FIXME currently only 5354 code implemented.
|
|
+
|
|
+ if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
|
|
+ return;
|
|
+
|
|
+ pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
|
|
+ cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);
|
|
+
|
|
+ ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
|
|
+ cc->pmu.rev, pmucap);
|
|
+
|
|
+ if (cc->pmu.rev >= 1) {
|
|
+ if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) {
|
|
+ chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
|
|
+ ~SSB_CHIPCO_PMU_CTL_NOILPONW);
|
|
+ } else {
|
|
+ chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
|
|
+ SSB_CHIPCO_PMU_CTL_NOILPONW);
|
|
+ }
|
|
+ }
|
|
+ ssb_pmu_pll_init(cc);
|
|
+ ssb_pmu_resources_init(cc);
|
|
+}
|
|
Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon.c
|
|
===================================================================
|
|
--- linux-2.6.28.2.orig/drivers/ssb/driver_chipcommon.c 2009-02-01 13:07:03.000000000 +0100
|
|
+++ linux-2.6.28.2/drivers/ssb/driver_chipcommon.c 2009-02-01 13:47:17.000000000 +0100
|
|
@@ -26,19 +26,6 @@ enum ssb_clksrc {
|
|
};
|
|
|
|
|
|
-static inline u32 chipco_read32(struct ssb_chipcommon *cc,
|
|
- u16 offset)
|
|
-{
|
|
- return ssb_read32(cc->dev, offset);
|
|
-}
|
|
-
|
|
-static inline void chipco_write32(struct ssb_chipcommon *cc,
|
|
- u16 offset,
|
|
- u32 value)
|
|
-{
|
|
- ssb_write32(cc->dev, offset, value);
|
|
-}
|
|
-
|
|
static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
|
|
u32 mask, u32 value)
|
|
{
|
|
@@ -246,6 +233,7 @@ void ssb_chipcommon_init(struct ssb_chip
|
|
{
|
|
if (!cc->dev)
|
|
return; /* We don't have a ChipCommon */
|
|
+ ssb_pmu_init(cc);
|
|
chipco_powercontrol_init(cc);
|
|
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
|
|
calc_fast_powerup_delay(cc);
|
|
Index: linux-2.6.28.2/include/linux/ssb/ssb_driver_chipcommon.h
|
|
===================================================================
|
|
--- linux-2.6.28.2.orig/include/linux/ssb/ssb_driver_chipcommon.h 2009-02-01 13:22:59.000000000 +0100
|
|
+++ linux-2.6.28.2/include/linux/ssb/ssb_driver_chipcommon.h 2009-02-01 21:09:37.000000000 +0100
|
|
@@ -181,6 +181,16 @@
|
|
#define SSB_CHIPCO_PROG_WAITCNT 0x0124
|
|
#define SSB_CHIPCO_FLASH_CFG 0x0128
|
|
#define SSB_CHIPCO_FLASH_WAITCNT 0x012C
|
|
+#define SSB_CHIPCO_CLKCTLST 0x01E0 /* Clock control and status (rev >= 20) */
|
|
+#define SSB_CHIPCO_CLKCTLST_FORCEALP 0x00000001 /* Force ALP request */
|
|
+#define SSB_CHIPCO_CLKCTLST_FORCEHT 0x00000002 /* Force HT request */
|
|
+#define SSB_CHIPCO_CLKCTLST_FORCEILP 0x00000004 /* Force ILP request */
|
|
+#define SSB_CHIPCO_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */
|
|
+#define SSB_CHIPCO_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
|
|
+#define SSB_CHIPCO_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
|
|
+#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00010000 /* HT available */
|
|
+#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00020000 /* APL available */
|
|
+#define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
|
|
#define SSB_CHIPCO_UART0_DATA 0x0300
|
|
#define SSB_CHIPCO_UART0_IMR 0x0304
|
|
#define SSB_CHIPCO_UART0_FCR 0x0308
|
|
@@ -197,6 +207,172 @@
|
|
#define SSB_CHIPCO_UART1_LSR 0x0414
|
|
#define SSB_CHIPCO_UART1_MSR 0x0418
|
|
#define SSB_CHIPCO_UART1_SCRATCH 0x041C
|
|
+/* PMU registers (rev >= 20) */
|
|
+#define SSB_CHIPCO_PMU_CTL 0x0600 /* PMU control */
|
|
+#define SSB_CHIPCO_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */
|
|
+#define SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT 16
|
|
+#define SSB_CHIPCO_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
|
|
+#define SSB_CHIPCO_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
|
|
+#define SSB_CHIPCO_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */
|
|
+#define SSB_CHIPCO_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */
|
|
+#define SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT 2
|
|
+#define SSB_CHIPCO_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */
|
|
+#define SSB_CHIPCO_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */
|
|
+#define SSB_CHIPCO_PMU_CAP 0x0604 /* PMU capabilities */
|
|
+#define SSB_CHIPCO_PMU_CAP_REVISION 0x000000FF /* Revision mask */
|
|
+#define SSB_CHIPCO_PMU_STAT 0x0608 /* PMU status */
|
|
+#define SSB_CHIPCO_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */
|
|
+#define SSB_CHIPCO_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */
|
|
+#define SSB_CHIPCO_PMU_STAT_HAVEALP 0x00000008 /* ALP available */
|
|
+#define SSB_CHIPCO_PMU_STAT_HAVEHT 0x00000004 /* HT available */
|
|
+#define SSB_CHIPCO_PMU_STAT_RESINIT 0x00000003 /* Res init */
|
|
+#define SSB_CHIPCO_PMU_RES_STAT 0x060C /* PMU res status */
|
|
+#define SSB_CHIPCO_PMU_RES_PEND 0x0610 /* PMU res pending */
|
|
+#define SSB_CHIPCO_PMU_TIMER 0x0614 /* PMU timer */
|
|
+#define SSB_CHIPCO_PMU_MINRES_MSK 0x0618 /* PMU min res mask */
|
|
+#define SSB_CHIPCO_PMU_MAXRES_MSK 0x061C /* PMU max res mask */
|
|
+#define SSB_CHIPCO_PMU_RES_TABSEL 0x0620 /* PMU res table sel */
|
|
+#define SSB_CHIPCO_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */
|
|
+#define SSB_CHIPCO_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */
|
|
+#define SSB_CHIPCO_PMU_RES_TIMER 0x062C /* PMU res timer */
|
|
+#define SSB_CHIPCO_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */
|
|
+#define SSB_CHIPCO_PMU_WATCHDOG 0x0634 /* PMU watchdog */
|
|
+#define SSB_CHIPCO_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */
|
|
+#define SSB_CHIPCO_PMU_RES_REQT 0x0644 /* PMU res req timer */
|
|
+#define SSB_CHIPCO_PMU_RES_REQM 0x0648 /* PMU res req mask */
|
|
+#define SSB_CHIPCO_CHIPCTL_ADDR 0x0650
|
|
+#define SSB_CHIPCO_CHIPCTL_DATA 0x0654
|
|
+#define SSB_CHIPCO_REGCTL_ADDR 0x0658
|
|
+#define SSB_CHIPCO_REGCTL_DATA 0x065C
|
|
+#define SSB_CHIPCO_PLLCTL_ADDR 0x0660
|
|
+#define SSB_CHIPCO_PLLCTL_DATA 0x0664
|
|
+
|
|
+
|
|
+
|
|
+/** PMU PLL registers */
|
|
+
|
|
+/* PMU rev 0 PLL registers */
|
|
+#define SSB_PMU0_PLLCTL0 0
|
|
+#define SSB_PMU0_PLLCTL0_PDIV_MSK 0x00000001
|
|
+#define SSB_PMU0_PLLCTL0_PDIV_FREQ 25000 /* kHz */
|
|
+#define SSB_PMU0_PLLCTL1 1
|
|
+#define SSB_PMU0_PLLCTL1_WILD_IMSK 0xF0000000 /* Wild int mask (low nibble) */
|
|
+#define SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT 28
|
|
+#define SSB_PMU0_PLLCTL1_WILD_FMSK 0x0FFFFF00 /* Wild frac mask */
|
|
+#define SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT 8
|
|
+#define SSB_PMU0_PLLCTL1_STOPMOD 0x00000040 /* Stop mod */
|
|
+#define SSB_PMU0_PLLCTL2 2
|
|
+#define SSB_PMU0_PLLCTL2_WILD_IMSKHI 0x0000000F /* Wild int mask (high nibble) */
|
|
+#define SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT 0
|
|
+
|
|
+/* PMU rev 1 PLL registers */
|
|
+#define SSB_PMU1_PLLCTL0 0
|
|
+#define SSB_PMU1_PLLCTL1 1
|
|
+#define SSB_PMU1_PLLCTL2 2
|
|
+#define SSB_PMU1_PLLCTL3 3
|
|
+#define SSB_PMU1_PLLCTL4 4
|
|
+#define SSB_PMU1_PLLCTL5 5
|
|
+
|
|
+/* BCM4312 PLL resource numbers. */
|
|
+#define SSB_PLLRES_4312_SWITCHER_BURST 0
|
|
+#define SSB_PLLRES_4312_SWITCHER_PWM 1
|
|
+#define SSB_PLLRES_4312_PA_REF_LDO 2
|
|
+#define SSB_PLLRES_4312_CORE_LDO_BURST 3
|
|
+#define SSB_PLLRES_4312_CORE_LDO_PWM 4
|
|
+#define SSB_PLLRES_4312_RADIO_LDO 5
|
|
+#define SSB_PLLRES_4312_ILP_REQUEST 6
|
|
+#define SSB_PLLRES_4312_BG_FILTBYP 7
|
|
+#define SSB_PLLRES_4312_TX_FILTBYP 8
|
|
+#define SSB_PLLRES_4312_RX_FILTBYP 9
|
|
+#define SSB_PLLRES_4312_XTAL_PU 10
|
|
+#define SSB_PLLRES_4312_ALP_AVAIL 11
|
|
+#define SSB_PLLRES_4312_BB_PLL_FILTBYP 12
|
|
+#define SSB_PLLRES_4312_RF_PLL_FILTBYP 13
|
|
+#define SSB_PLLRES_4312_HT_AVAIL 14
|
|
+
|
|
+/* BCM4325 PLL resource numbers. */
|
|
+#define SSB_PLLRES_4325_BUCK_BOOST_BURST 0
|
|
+#define SSB_PLLRES_4325_CBUCK_BURST 1
|
|
+#define SSB_PLLRES_4325_CBUCK_PWM 2
|
|
+#define SSB_PLLRES_4325_CLDO_CBUCK_BURST 3
|
|
+#define SSB_PLLRES_4325_CLDO_CBUCK_PWM 4
|
|
+#define SSB_PLLRES_4325_BUCK_BOOST_PWM 5
|
|
+#define SSB_PLLRES_4325_ILP_REQUEST 6
|
|
+#define SSB_PLLRES_4325_ABUCK_BURST 7
|
|
+#define SSB_PLLRES_4325_ABUCK_PWM 8
|
|
+#define SSB_PLLRES_4325_LNLDO1_PU 9
|
|
+#define SSB_PLLRES_4325_LNLDO2_PU 10
|
|
+#define SSB_PLLRES_4325_LNLDO3_PU 11
|
|
+#define SSB_PLLRES_4325_LNLDO4_PU 12
|
|
+#define SSB_PLLRES_4325_XTAL_PU 13
|
|
+#define SSB_PLLRES_4325_ALP_AVAIL 14
|
|
+#define SSB_PLLRES_4325_RX_PWRSW_PU 15
|
|
+#define SSB_PLLRES_4325_TX_PWRSW_PU 16
|
|
+#define SSB_PLLRES_4325_RFPLL_PWRSW_PU 17
|
|
+#define SSB_PLLRES_4325_LOGEN_PWRSW_PU 18
|
|
+#define SSB_PLLRES_4325_AFE_PWRSW_PU 19
|
|
+#define SSB_PLLRES_4325_BBPLL_PWRSW_PU 20
|
|
+#define SSB_PLLRES_4325_HT_AVAIL 21
|
|
+
|
|
+/* BCM4328 PLL resource numbers. */
|
|
+#define SSB_PLLRES_4328_EXT_SWITCHER_PWM 0
|
|
+#define SSB_PLLRES_4328_BB_SWITCHER_PWM 1
|
|
+#define SSB_PLLRES_4328_BB_SWITCHER_BURST 2
|
|
+#define SSB_PLLRES_4328_BB_EXT_SWITCHER_BURST 3
|
|
+#define SSB_PLLRES_4328_ILP_REQUEST 4
|
|
+#define SSB_PLLRES_4328_RADIO_SWITCHER_PWM 5
|
|
+#define SSB_PLLRES_4328_RADIO_SWITCHER_BURST 6
|
|
+#define SSB_PLLRES_4328_ROM_SWITCH 7
|
|
+#define SSB_PLLRES_4328_PA_REF_LDO 8
|
|
+#define SSB_PLLRES_4328_RADIO_LDO 9
|
|
+#define SSB_PLLRES_4328_AFE_LDO 10
|
|
+#define SSB_PLLRES_4328_PLL_LDO 11
|
|
+#define SSB_PLLRES_4328_BG_FILTBYP 12
|
|
+#define SSB_PLLRES_4328_TX_FILTBYP 13
|
|
+#define SSB_PLLRES_4328_RX_FILTBYP 14
|
|
+#define SSB_PLLRES_4328_XTAL_PU 15
|
|
+#define SSB_PLLRES_4328_XTAL_EN 16
|
|
+#define SSB_PLLRES_4328_BB_PLL_FILTBYP 17
|
|
+#define SSB_PLLRES_4328_RF_PLL_FILTBYP 18
|
|
+#define SSB_PLLRES_4328_BB_PLL_PU 19
|
|
+
|
|
+/* BCM5354 PLL resource numbers. */
|
|
+#define SSB_PLLRES_5354_EXT_SWITCHER_PWM 0
|
|
+#define SSB_PLLRES_5354_BB_SWITCHER_PWM 1
|
|
+#define SSB_PLLRES_5354_BB_SWITCHER_BURST 2
|
|
+#define SSB_PLLRES_5354_BB_EXT_SWITCHER_BURST 3
|
|
+#define SSB_PLLRES_5354_ILP_REQUEST 4
|
|
+#define SSB_PLLRES_5354_RADIO_SWITCHER_PWM 5
|
|
+#define SSB_PLLRES_5354_RADIO_SWITCHER_BURST 6
|
|
+#define SSB_PLLRES_5354_ROM_SWITCH 7
|
|
+#define SSB_PLLRES_5354_PA_REF_LDO 8
|
|
+#define SSB_PLLRES_5354_RADIO_LDO 9
|
|
+#define SSB_PLLRES_5354_AFE_LDO 10
|
|
+#define SSB_PLLRES_5354_PLL_LDO 11
|
|
+#define SSB_PLLRES_5354_BG_FILTBYP 12
|
|
+#define SSB_PLLRES_5354_TX_FILTBYP 13
|
|
+#define SSB_PLLRES_5354_RX_FILTBYP 14
|
|
+#define SSB_PLLRES_5354_XTAL_PU 15
|
|
+#define SSB_PLLRES_5354_XTAL_EN 16
|
|
+#define SSB_PLLRES_5354_BB_PLL_FILTBYP 17
|
|
+#define SSB_PLLRES_5354_RF_PLL_FILTBYP 18
|
|
+#define SSB_PLLRES_5354_BB_PLL_PU 19
|
|
+
|
|
+
|
|
+
|
|
+/** Chip specific Chip-Status register contents. */
|
|
+#define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003
|
|
+#define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */
|
|
+#define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */
|
|
+#define SSB_CHIPCO_CHST_4325_OTP_SEL 2 /* OTP is powered up, no SPROM */
|
|
+#define SSB_CHIPCO_CHST_4325_OTP_PWRDN 3 /* OTP is powered down, SPROM is present */
|
|
+#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE 0x00000004
|
|
+#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE_SHIFT 2
|
|
+#define SSB_CHIPCO_CHST_4325_RCAL_VALID 0x00000008
|
|
+#define SSB_CHIPCO_CHST_4325_RCAL_VALID_SHIFT 3
|
|
+#define SSB_CHIPCO_CHST_4325_RCAL_VALUE 0x000001F0
|
|
+#define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4
|
|
+#define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */
|
|
|
|
|
|
|
|
@@ -353,11 +529,20 @@
|
|
struct ssb_device;
|
|
struct ssb_serial_port;
|
|
|
|
+/* Data for the PMU, if available.
|
|
+ * Check availability with ((struct ssb_chipcommon)->capabilities & SSB_CHIPCO_CAP_PMU)
|
|
+ */
|
|
+struct ssb_chipcommon_pmu {
|
|
+ u8 rev; /* PMU revision */
|
|
+ u32 crystalfreq; /* The active crystal frequency (in kHz) */
|
|
+};
|
|
+
|
|
struct ssb_chipcommon {
|
|
struct ssb_device *dev;
|
|
u32 capabilities;
|
|
/* Fast Powerup Delay constant */
|
|
u16 fast_pwrup_delay;
|
|
+ struct ssb_chipcommon_pmu pmu;
|
|
};
|
|
|
|
static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
|
|
@@ -365,6 +550,17 @@ static inline bool ssb_chipco_available(
|
|
return (cc->dev != NULL);
|
|
}
|
|
|
|
+/* Register access */
|
|
+#define chipco_read32(cc, offset) ssb_read32((cc)->dev, offset)
|
|
+#define chipco_write32(cc, offset, val) ssb_write32((cc)->dev, offset, val)
|
|
+
|
|
+#define chipco_mask32(cc, offset, mask) \
|
|
+ chipco_write32(cc, offset, chipco_read32(cc, offset) & (mask))
|
|
+#define chipco_set32(cc, offset, set) \
|
|
+ chipco_write32(cc, offset, chipco_read32(cc, offset) | (set))
|
|
+#define chipco_maskset32(cc, offset, mask, set) \
|
|
+ chipco_write32(cc, offset, (chipco_read32(cc, offset) & (mask)) | (set))
|
|
+
|
|
extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
|
|
|
|
extern void ssb_chipco_suspend(struct ssb_chipcommon *cc);
|
|
@@ -406,4 +602,8 @@ extern int ssb_chipco_serial_init(struct
|
|
struct ssb_serial_port *ports);
|
|
#endif /* CONFIG_SSB_SERIAL */
|
|
|
|
+/* PMU support */
|
|
+extern void ssb_pmu_init(struct ssb_chipcommon *cc);
|
|
+
|
|
+
|
|
#endif /* LINUX_SSB_CHIPCO_H_ */
|