1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-12 00:03:44 +02:00
openwrt-xburst/target/linux/generic-2.6/patches-2.6.34/691-phy_rtl8366.patch
lars 8db5903195 [kernel] Add checksum for 2.6.34, refresh 2.6.34 patches and update targets from 2.6.34-rcX to 2.6.34
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21498 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-17 22:05:07 +00:00

45 lines
1.2 KiB
Diff

--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -157,4 +157,29 @@ config MDIO_OCTEON
If in doubt, say Y.
+config RTL8366_SMI
+ tristate "Driver for the RTL8366 SMI interface"
+ depends on GENERIC_GPIO
+ ---help---
+ This module implements the SMI interface protocol which is used
+ by some RTL8366 ethernet switch devices via the generic GPIO API.
+
+if RTL8366_SMI
+
+config RTL8366S_PHY
+ tristate "Driver for the Realtek RTL8366S switch"
+ select SWCONFIG
+
+config RTL8366RB_PHY
+ tristate "Driver for the Realtek RTL8366RB switch"
+ select SWCONFIG
+
+config RTL8366S_PHY_DEBUG_FS
+ bool "RTL8366 switch driver DEBUG_FS support"
+ depends on RTL8366S_PHY || RTL8366RB_PHY
+ depends on DEBUG_FS
+ default n
+
+endif # RTL8366_SMI
+
endif # PHYLIB
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -20,6 +20,9 @@ obj-$(CONFIG_IP175C_PHY) += ip175c.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o
obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
+obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
+obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o
+obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
obj-$(CONFIG_FIXED_PHY) += fixed.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o