1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-25 16:34:04 +02:00
openwrt-xburst/target/linux/package/openwrt/files/brcm/etc/network.overrides
nbd 85fa7a0ac5 clean up board-dependent files, add pppoatm support, add proper config examples
git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@1754 3c298f89-4303-0410-b956-a3cf2f4a3e73
2005-08-26 15:52:12 +00:00

42 lines
1.3 KiB
Plaintext

# NVRAM overrides
#
# This file handles the NVRAM quirks of various hardware.
# THIS FILE IS NOT A REPLACEMENT FOR NVRAM
# Load sysconf defaults
[ -f /etc/sysconf ] && . /etc/sysconf
# hacks for wrt54g 1.x hardware
[ "$(nvram get boardnum)" = "42" \
-a "$(nvram get boardtype)" = "bcm94710dev" ] && FAILSAFE_ifnames="vlan1 vlan2 eth2"
# hacks for asus wl-500g deluxe
[ "$(nvram get boardtype)" = "bcm95365r" \
-a "$(nvram get boardnum)" = "45" ] && FAILSAFE_ifnames="vlan0 eth1"
# hacks for wap54g hardware
[ "$(nvram get boardnum)" = "2" \
-o "$(nvram get boardnum)" = "1024" ] && FAILSAFE_ifnames="eth0 eth1"
# hack for asus wl-500g hardware
[ "$(nvram get boardnum)" = "asusX" \
-a "$(nvram get boardtype)" = "bcm94710dev" ] && FAILSAFE_ifnames="eth0 eth1 eth2"
FAILSAFE_ifnames=${FAILSAFE_ifnames:-"vlan0 vlan1 eth1 eth2 eth3"}
DEFAULT_lan_ipaddr=${BR2_SYSCONF_FAILSAFE_IP:-"192.168.1.1"}
DEFAULT_lan_netmask=${BR2_SYSCONF_FAILSAFE_NETMASK:-"255.255.255.0"}
DEFAULT_lan_hwaddr=${BR2_SYSCONF_FAILSAFE_MAC:-"00:0B:AD:0A:DD:00"}
# failsafe if reset is held
[ "$FAILSAFE" = "true" ] && {
echo "### YOU ARE IN FAILSAFE MODE ####"
NVRAM_lan_ifname="br0"
NVRAM_lan_ifnames=$FAILSAFE_ifnames
NVRAM_lan_ipaddr=DEFAULT_lan_ipaddr
NVRAM_lan_netmask=DEFAULT_lan_netmask
NVRAM_lan_hwaddr=DEFAULT_lan_hwaddr
NVRAM_wan_ifname="none"
NVRAM_wifi_ifname="none"
}