qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-28 16:29:43 +02:00
Code
89cc72d82e
openwrt-xburst/package/madwifi/Makefile
thepeople 2d6e73eaf2 This patch adds a number of configuration options to the MadWifi package. You can 
now configure the HAL, bus, default rate control algorithm as well as the debug
mode from within make menuconfig. The goal is to be able to support hardware
profiles with different HALs without messing around with the Makefile directly.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11140 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-15 00:59:34 +00:00

264 lines
6.4 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2006-2008 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
# $Id$
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=madwifi
PKG_REV:=3314
PKG_VERSION:=r$(PKG_REV)
# PKG_BRANCH:=madwifi-dfs
PKG_RELEASE:=1
PKG_SOURCE_PROTO:=svn
PKG_SOURCE_VERSION:=$(PKG_REV)
PKG_SOURCE_SUBDIR:=$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
PKG_SOURCE_URL:=http://svn.madwifi.org/madwifi/$(if $(PKG_BRANCH),branches/$(PKG_BRANCH),trunk)
PKG_SOURCE:=$(PKG_SOURCE_SUBDIR).tar.gz
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
include $(INCLUDE_DIR)/package.mk
ifdef CONFIG_MADWIFI_BUS_DEFAULT
ifneq ($(CONFIG_TARGET_atheros),)
BUS:=AHB
else
ifneq ($(CONFIG_PCI_SUPPORT),)
BUS:=PCI
endif
endif
# XXX: remove this check later when we have PCI support properly detected on all targets
ifneq ($(CONFIG_TARGET_ar7)$(CONFIG_TARGET_uml),)
BUS:=
endif
else
ifdef CONFIG_MADWIFI_BUS_PCI
BUS:=PCI
else
ifdef CONFIG_MADWIFI_BUS_AHB
BUS:=AHB
endif
endif
endif
ifdef CONFIG_MADWIFI_HAL_DEFAULT
ifeq ($(ARCH),mips)
HAL_TARGET:=mips-be-elf
endif
ifeq ($(ARCH),mipsel)
HAL_TARGET:=mips-le-elf
endif
ifeq ($(ARCH),i386)
HAL_TARGET:=i386-elf
endif
ifeq ($(ARCH),i686)
HAL_TARGET:=i386-elf
endif
ifeq ($(BOARD),ixp4xx)
HAL_TARGET:=xscale-be-elf
endif
ifeq ($(BOARD),iop32x)
HAL_TARGET:=xscale-le-elf
endif
ifeq ($(ARCH),powerpc)
HAL_TARGET:=powerpc-be-elf
endif
ifeq ($(BOARD),storm)
HAL_TARGET:=armv4-le-elf
endif
ifneq ($(CONFIG_TARGET_atheros),)
HAL_TARGET:=ap51
endif
else
ifdef CONFIG_MADWIFI_HAL_MIPS_BE_ELF
HAL_TARGET:=mips-be-elf
endif
ifdef CONFIG_MADWIFI_HAL_MIPS_LE_ELF
HAL_TARGET:=mips-le-elf
endif
ifdef CONFIG_MADWIFI_HAL_I386_ELF
HAL_TARGET:=i386-elf
endif
ifdef CONFIG_MADWIFI_HAL_XSCALE_BE_ELF
HAL_TARGET:=xscale-be-elf
endif
ifdef CONFIG_MADWIFI_HAL_XSCALE_LE_ELF
HAL_TARGET:=xscale-le-elf
endif
ifdef CONFIG_MADWIFI_HAL_ARMV4_LE_ELF
HAL_TARGET:=armv4-le-elf
endif
ifdef CONFIG_MADWIFI_HAL_AP30
HAL_TARGET:=ap30
endif
ifdef CONFIG_MADWIFI_HAL_AP43
HAL_TARGET:=ap43
endif
ifdef CONFIG_MADWIFI_HAL_AP51
HAL_TARGET:=ap51
endif
ifdef CONFIG_MADWIFI_HAL_AP61
HAL_TARGET:=ap61
endif
endif
ifdef CONFIG_MADWIFI_RCA_MINSTREL
RATE_CONTROL:=minstrel
endif
ifdef CONFIG_MADWIFI_RCA_ONOE
RATE_CONTROL:=onoe
endif
ifdef CONFIG_MADWIFI_RCA_AMRR
RATE_CONTROL:=amrr
endif
ifdef CONFIG_MADWIFI_RCA_SAMPLERATE
RATE_CONTROL:=sample
endif
MADWIFI_FILES:= \
$(PKG_BUILD_DIR)/net80211/wlan.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/net80211/wlan_scan_ap.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/net80211/wlan_scan_sta.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/ath_rate/$(RATE_CONTROL)/ath_rate_$(RATE_CONTROL).$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/net80211/wlan_acl.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/net80211/wlan_ccmp.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/net80211/wlan_tkip.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/net80211/wlan_wep.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/net80211/wlan_xauth.$(LINUX_KMOD_SUFFIX) \
MADWIFI_AUTOLOAD:= \
wlan \
wlan_scan_ap \
wlan_scan_sta \
ath_hal \
ath_rate_$(RATE_CONTROL) \
wlan_acl \
wlan_ccmp \
wlan_tkip \
wlan_wep \
wlan_xauth \
ifeq ($(findstring AHB,$(BUS)),AHB)
MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX)
MADWIFI_AUTOLOAD+= ath_ahb
endif
ifeq ($(findstring PCI,$(BUS)),PCI)
MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_pci.$(LINUX_KMOD_SUFFIX)
MADWIFI_AUTOLOAD+= ath_pci
endif
MADWIFI_APPLETS:=80211stats,athchans,athctrl,athkey,athstats,wlanconfig
ifdef CONFIG_MADWIFI_DEBUG
MADWIFI_APPLETS:=$(strip $(MADWIFI_APPLETS)),athdebug,80211debug
endif
define KernelPackage/madwifi
SUBMENU:=Wireless Drivers
TITLE:=Driver for Atheros wireless chipsets
URL:=http://madwifi.org/
DEPENDS:=+wireless-tools @PCI_SUPPORT||TARGET_atheros @!TARGET_ar7 @!TARGET_avr32 @!TARGET_etrax @!TARGET_uml
FILES:=$(MADWIFI_FILES)
AUTOLOAD:=$(call AutoLoad,50,$(MADWIFI_AUTOLOAD))
endef
define KernelPackage/madwifi/description
This package contains a driver for Atheros 802.11a/b/g chipsets.
endef
define KernelPackage/madwifi/config
menu "MadWifi Configuration"
depends on PACKAGE_kmod-madwifi
source "$(SOURCE)/Config.in"
endmenu
endef
MAKE_ARGS:= \
PATH="$(TARGET_PATH)" \
ARCH="$(LINUX_KARCH)" \
CROSS_COMPILE="$(TARGET_CROSS)" \
TARGET="$(HAL_TARGET)" \
TOOLPREFIX="$(KERNEL_CROSS)" \
TOOLPATH="$(KERNEL_CROSS)" \
KERNELPATH="$(LINUX_DIR)" \
LDOPTS="--no-warn-mismatch " \
ATH_RATE="ath_rate/$(RATE_CONTROL)" \
WARNINGS="-Wno-unused" \
$(ifndef CONFIG_MADWIFI_DEBUG,DEBUG="") \
DOMULTI=1
MAKE_VARS:= \
COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"'" \
HALFILE:=$(lastword $(sort $(wildcard ./ath_hal-*.tgz)))
ifneq ($(HALFILE),)
define Build/Prepare
$(call Build/Prepare/Default)
rm -rf $(PKG_BUILD_DIR)/tmp
mkdir -p $(PKG_BUILD_DIR)/tmp
tar xvzf $(HALFILE) -C $(PKG_BUILD_DIR)/tmp
$(CP) $(PKG_BUILD_DIR)/tmp/ath_hal*/* $(PKG_BUILD_DIR)/hal/
rm -rf $(PKG_BUILD_DIR)/tmp
endef
endif
ifeq ($(findstring AHB,$(BUS)),AHB)
define Build/Compile/ahb
$(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) BUS="AHB" modules
$(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) CFLAGS="$(TARGET_CFLAGS)" tools
endef
endif
ifeq ($(findstring PCI,$(BUS)),PCI)
define Build/Compile/pci
$(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) BUS="PCI" modules
$(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) CFLAGS="$(TARGET_CFLAGS)" tools
endef
endif
define Build/Configure
$(SED) 's,-E[LB] ,,g' $(PKG_BUILD_DIR)/hal/public/*.inc
endef
define Build/Compile
$(call Build/Compile/ahb)
$(call Build/Compile/pci)
endef
define Build/InstallDev
mkdir -p $(1)/usr/include/madwifi
$(CP) $(PKG_BUILD_DIR)/include $(1)/usr/include/madwifi/
mkdir -p $(1)/usr/include/madwifi/net80211
$(CP) $(PKG_BUILD_DIR)/net80211/*.h $(1)/usr/include/madwifi/net80211/
endef
define KernelPackage/madwifi/install
$(INSTALL_DIR) $(1)/lib/wifi
$(INSTALL_DATA) ./files/lib/wifi/madwifi.sh $(1)/lib/wifi
$(INSTALL_DIR) $(1)/usr/sbin
$(CP) $(PKG_BUILD_DIR)/tools/{madwifi_multi,$(MADWIFI_APPLETS)} $(1)/usr/sbin/
endef
$(eval $(call KernelPackage,madwifi))
View Git Blame Copy Permalink