mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-14 14:59:42 +02:00
f833889761
This patch allows the bcm57xx module to work correctly with failsafe mode. insmod doesn't return an error when a module loads but doesn't detect a switch. I added the check_module function to load the module, then make sure it doesn't just exit immediately. This allows preinit to only attempt to load the bcm57xx module when switch-robo and switch-adm dont detect a switch. The activate_gpio parameter to bcm57xx simply instructs the module to attempt to activate the switch via gpio before probing for the switch. Tested on wrt350n. Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11468 3c298f89-4303-0410-b956-a3cf2f4a3e73
71 lines
1.5 KiB
Plaintext
Executable File
71 lines
1.5 KiB
Plaintext
Executable File
. /etc/functions.sh
|
|
|
|
failsafe() {
|
|
lock /tmp/.failsafe
|
|
failsafe_ip
|
|
|
|
echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
|
|
|
|
set_state failsafe
|
|
[ -x "/usr/sbin/nvram" ] && {
|
|
[ "$(nvram get boot_wait)" != "on" ] && {
|
|
nvram set boot_wait=on
|
|
nvram commit
|
|
}
|
|
}
|
|
|
|
netmsg 192.168.1.255 "Entering Failsafe!"
|
|
telnetd -l /bin/login <> /dev/null 2>&1
|
|
|
|
ash --login
|
|
}
|
|
|
|
mount none /proc -t proc
|
|
|
|
insmod diag
|
|
set_state preinit
|
|
echo '/sbin/hotplug.failsafe' > /proc/sys/kernel/hotplug
|
|
|
|
ifname=eth0
|
|
|
|
# hardware specific overrides
|
|
case "$(cat /proc/diag/model)" in
|
|
"Linksys WAP54G V1") ifname=eth1;;
|
|
"ASUS WL-HDD") ifname=eth1;;
|
|
"ASUS WL-300g") ifname=eth1;;
|
|
"ASUS (unknown, BCM4702)") ifname=eth1;;
|
|
"Sitecom WL-105b") ifname=eth1;;
|
|
esac
|
|
|
|
failsafe_ip
|
|
|
|
check_module () {
|
|
module="$1"; shift; params="$*"
|
|
|
|
insmod "$module" "$params"
|
|
sleep 1
|
|
grep "^$module" /proc/modules
|
|
return $?
|
|
}
|
|
|
|
insmod switch-core
|
|
check_module switch-robo || check_module switch-adm || {
|
|
check_module bcm57xx activate_gpio=0x4 && cpu_port="8u*"
|
|
} || rmmod switch-core
|
|
|
|
[ -d /proc/switch/eth0 ] && {
|
|
echo 1 > /proc/switch/eth0/reset
|
|
|
|
# this would be easier if we blasted the message across all ports
|
|
# but we don't want packets leaking across interfaces
|
|
for port in $(seq 0 4); do {
|
|
echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
|
|
netmsg 192.168.1.255 "Press reset now, to enter Failsafe!"
|
|
}; done
|
|
} || netmsg 192.168.1.255 "Press reset now, to enter Failsafe!"
|
|
|
|
ifconfig $ifname 0.0.0.0 down
|
|
|
|
sleep 2
|
|
|