mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-05 05:31:53 +02:00
2fd852f1f1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9513 3c298f89-4303-0410-b956-a3cf2f4a3e73
705 lines
17 KiB
C
705 lines
17 KiB
C
/*
|
|
* OHCI HCD (Host Controller Driver) for USB.
|
|
*
|
|
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
|
|
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
|
|
*
|
|
* This file is licenced under the GPL.
|
|
*/
|
|
|
|
#include <linux/irq.h>
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* URB goes back to driver, and isn't reissued.
|
|
* It's completely gone from HC data structures.
|
|
* PRECONDITION: ahcd lock held, irqs blocked.
|
|
*/
|
|
static void
|
|
finish_urb(struct admhcd *ahcd, struct urb *urb)
|
|
__releases(ahcd->lock)
|
|
__acquires(ahcd->lock)
|
|
{
|
|
urb_priv_free(ahcd, urb->hcpriv);
|
|
urb->hcpriv = NULL;
|
|
|
|
spin_lock(&urb->lock);
|
|
if (likely(urb->status == -EINPROGRESS))
|
|
urb->status = 0;
|
|
|
|
/* report short control reads right even though the data TD always
|
|
* has TD_R set. (much simpler, but creates the 1-td limit.)
|
|
*/
|
|
if (unlikely(urb->transfer_flags & URB_SHORT_NOT_OK)
|
|
&& unlikely(usb_pipecontrol(urb->pipe))
|
|
&& urb->actual_length < urb->transfer_buffer_length
|
|
&& usb_pipein(urb->pipe)
|
|
&& urb->status == 0) {
|
|
urb->status = -EREMOTEIO;
|
|
#ifdef ADMHC_VERBOSE_DEBUG
|
|
urb_print(ahcd, urb, "SHORT", usb_pipeout (urb->pipe));
|
|
#endif
|
|
}
|
|
spin_unlock(&urb->lock);
|
|
|
|
switch (usb_pipetype(urb->pipe)) {
|
|
case PIPE_ISOCHRONOUS:
|
|
admhcd_to_hcd(ahcd)->self.bandwidth_isoc_reqs--;
|
|
break;
|
|
case PIPE_INTERRUPT:
|
|
admhcd_to_hcd(ahcd)->self.bandwidth_int_reqs--;
|
|
break;
|
|
}
|
|
|
|
#ifdef ADMHC_VERBOSE_DEBUG
|
|
urb_print(ahcd, urb, "FINISH", 0);
|
|
#endif
|
|
|
|
/* urb->complete() can reenter this HCD */
|
|
spin_unlock(&ahcd->lock);
|
|
usb_hcd_giveback_urb(admhcd_to_hcd(ahcd), urb);
|
|
spin_lock(&ahcd->lock);
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*
|
|
* ED handling functions
|
|
*-------------------------------------------------------------------------*/
|
|
|
|
static struct ed *ed_create(struct admhcd *ahcd, unsigned int type, u32 info)
|
|
{
|
|
struct ed *ed;
|
|
struct td *td;
|
|
|
|
ed = ed_alloc(ahcd, GFP_ATOMIC);
|
|
if (!ed)
|
|
goto err;
|
|
|
|
/* dummy td; end of td list for this ed */
|
|
td = td_alloc(ahcd, GFP_ATOMIC);
|
|
if (!td)
|
|
goto err_free_ed;
|
|
|
|
switch (type) {
|
|
case PIPE_INTERRUPT:
|
|
info |= ED_INT;
|
|
break;
|
|
case PIPE_ISOCHRONOUS:
|
|
info |= ED_ISO;
|
|
break;
|
|
}
|
|
|
|
ed->dummy = td;
|
|
ed->state = ED_NEW;
|
|
ed->type = type;
|
|
|
|
ed->hwINFO = cpu_to_hc32(ahcd, info);
|
|
ed->hwTailP = cpu_to_hc32(ahcd, td->td_dma);
|
|
ed->hwHeadP = cpu_to_hc32(ahcd, td->td_dma);
|
|
|
|
return ed;
|
|
|
|
err_free_ed:
|
|
ed_free(ahcd, ed);
|
|
err:
|
|
return NULL;
|
|
}
|
|
|
|
/* get and maybe (re)init an endpoint. init _should_ be done only as part
|
|
* of enumeration, usb_set_configuration() or usb_set_interface().
|
|
*/
|
|
static struct ed *ed_get(struct admhcd *ahcd, struct usb_host_endpoint *ep,
|
|
struct usb_device *udev, unsigned int pipe, int interval)
|
|
{
|
|
struct ed *ed;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ahcd->lock, flags);
|
|
ed = ep->hcpriv;
|
|
if (!ed) {
|
|
u32 info;
|
|
|
|
/* FIXME: usbcore changes dev->devnum before SET_ADDRESS
|
|
* suceeds ... otherwise we wouldn't need "pipe".
|
|
*/
|
|
info = usb_pipedevice(pipe);
|
|
info |= (ep->desc.bEndpointAddress & ~USB_DIR_IN) << ED_EN_SHIFT;
|
|
info |= le16_to_cpu(ep->desc.wMaxPacketSize) << ED_MPS_SHIFT;
|
|
if (udev->speed == USB_SPEED_FULL)
|
|
info |= ED_SPEED_FULL;
|
|
|
|
ed = ed_create(ahcd, usb_pipetype(pipe), info);
|
|
if (ed)
|
|
ep->hcpriv = ed;
|
|
}
|
|
spin_unlock_irqrestore(&ahcd->lock, flags);
|
|
|
|
return ed;
|
|
}
|
|
|
|
/* link an ed into the HC chain */
|
|
static int ed_schedule(struct admhcd *ahcd, struct ed *ed)
|
|
{
|
|
struct ed *old_tail;
|
|
|
|
if (admhcd_to_hcd(ahcd)->state == HC_STATE_QUIESCING)
|
|
return -EAGAIN;
|
|
|
|
if (ed->state != ED_NEW)
|
|
return 0;
|
|
|
|
admhc_dump_ed(ahcd, "ED-SCHED", ed, 0);
|
|
|
|
ed->state = ED_IDLE;
|
|
|
|
ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP);
|
|
|
|
old_tail = ahcd->ed_tails[ed->type];
|
|
|
|
ed->ed_next = old_tail->ed_next;
|
|
if (ed->ed_next) {
|
|
ed->ed_next->ed_prev = ed;
|
|
ed->hwNextED = cpu_to_hc32(ahcd, ed->ed_next->dma);
|
|
}
|
|
ed->ed_prev = old_tail;
|
|
|
|
old_tail->ed_next = ed;
|
|
old_tail->hwNextED = cpu_to_hc32(ahcd, ed->dma);
|
|
|
|
ahcd->ed_tails[ed->type] = ed;
|
|
|
|
admhc_intr_enable(ahcd, ADMHC_INTR_SOFI);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ed_deschedule(struct admhcd *ahcd, struct ed *ed)
|
|
{
|
|
admhc_dump_ed(ahcd, "ED-DESCHED", ed, 0);
|
|
|
|
/* remove this ED from the HC list */
|
|
ed->ed_prev->hwNextED = ed->hwNextED;
|
|
|
|
/* and remove it from our list */
|
|
ed->ed_prev->ed_next = ed->ed_next;
|
|
|
|
if (ed->ed_next) {
|
|
ed->ed_next->ed_prev = ed->ed_prev;
|
|
ed->ed_next = NULL;
|
|
}
|
|
|
|
if (ahcd->ed_tails[ed->type] == ed)
|
|
ahcd->ed_tails[ed->type] = ed->ed_prev;
|
|
|
|
ed->state = ED_NEW;
|
|
}
|
|
|
|
static void ed_start_deschedule(struct admhcd *ahcd, struct ed *ed)
|
|
{
|
|
admhc_dump_ed(ahcd, "ED-UNLINK", ed, 0);
|
|
|
|
ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP);
|
|
|
|
ed->state = ED_UNLINK;
|
|
|
|
/* add this ED into the remove list */
|
|
ed->ed_rm_next = ahcd->ed_rm_list;
|
|
ahcd->ed_rm_list = ed;
|
|
|
|
/* SOF interrupt might get delayed; record the frame counter value that
|
|
* indicates when the HC isn't looking at it, so concurrent unlinks
|
|
* behave. frame_no wraps every 2^16 msec, and changes right before
|
|
* SOF is triggered.
|
|
*/
|
|
ed->tick = admhc_frame_no(ahcd) + 1;
|
|
|
|
/* enable SOF interrupt */
|
|
admhc_intr_enable(ahcd, ADMHC_INTR_SOFI);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*
|
|
* TD handling functions
|
|
*-------------------------------------------------------------------------*/
|
|
|
|
static void td_fill(struct admhcd *ahcd, u32 info, dma_addr_t data, int len,
|
|
struct urb_priv *up)
|
|
{
|
|
struct td *td;
|
|
u32 cbl = 0;
|
|
|
|
if (up->td_idx >= up->td_cnt) {
|
|
admhc_dbg(ahcd, "td_fill error, idx=%d, cnt=%d\n", up->td_idx,
|
|
up->td_cnt);
|
|
return;
|
|
}
|
|
|
|
td = up->td[up->td_idx];
|
|
td->data_dma = data;
|
|
if (!len)
|
|
data = 0;
|
|
|
|
#if 1
|
|
if (up->td_idx == up->td_cnt-1)
|
|
#endif
|
|
cbl |= TD_IE;
|
|
|
|
if (data)
|
|
cbl |= (len & TD_BL_MASK);
|
|
|
|
info |= TD_OWN;
|
|
|
|
/* setup hardware specific fields */
|
|
td->hwINFO = cpu_to_hc32(ahcd, info);
|
|
td->hwDBP = cpu_to_hc32(ahcd, data);
|
|
td->hwCBL = cpu_to_hc32(ahcd, cbl);
|
|
|
|
if (up->td_idx > 0)
|
|
up->td[up->td_idx-1]->hwNextTD = cpu_to_hc32(ahcd, td->td_dma);
|
|
|
|
up->td_idx++;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* Prepare all TDs of a transfer, and queue them onto the ED.
|
|
* Caller guarantees HC is active.
|
|
* Usually the ED is already on the schedule, so TDs might be
|
|
* processed as soon as they're queued.
|
|
*/
|
|
static void td_submit_urb(struct admhcd *ahcd, struct urb *urb)
|
|
{
|
|
struct urb_priv *urb_priv = urb->hcpriv;
|
|
dma_addr_t data;
|
|
int data_len = urb->transfer_buffer_length;
|
|
int cnt = 0;
|
|
u32 info = 0;
|
|
int is_out = usb_pipeout(urb->pipe);
|
|
u32 toggle = 0;
|
|
|
|
/* OHCI handles the bulk/interrupt data toggles itself. We just
|
|
* use the device toggle bits for resetting, and rely on the fact
|
|
* that resetting toggle is meaningless if the endpoint is active.
|
|
*/
|
|
|
|
if (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), is_out)) {
|
|
toggle = TD_T_CARRY;
|
|
} else {
|
|
toggle = TD_T_DATA0;
|
|
usb_settoggle(urb->dev, usb_pipeendpoint (urb->pipe),
|
|
is_out, 1);
|
|
}
|
|
|
|
urb_priv->td_idx = 0;
|
|
|
|
if (data_len)
|
|
data = urb->transfer_dma;
|
|
else
|
|
data = 0;
|
|
|
|
/* NOTE: TD_CC is set so we can tell which TDs the HC processed by
|
|
* using TD_CC_GET, as well as by seeing them on the done list.
|
|
* (CC = NotAccessed ... 0x0F, or 0x0E in PSWs for ISO.)
|
|
*/
|
|
switch (urb_priv->ed->type) {
|
|
case PIPE_INTERRUPT:
|
|
info = is_out
|
|
? TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_OUT
|
|
: TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_IN;
|
|
|
|
/* setup service interval and starting frame number */
|
|
info |= (urb->start_frame & TD_FN_MASK);
|
|
info |= (urb->interval & TD_ISI_MASK) << TD_ISI_SHIFT;
|
|
|
|
td_fill(ahcd, info, data, data_len, urb_priv);
|
|
cnt++;
|
|
|
|
admhcd_to_hcd(ahcd)->self.bandwidth_int_reqs++;
|
|
break;
|
|
|
|
case PIPE_BULK:
|
|
info = is_out
|
|
? TD_SCC_NOTACCESSED | TD_DP_OUT
|
|
: TD_SCC_NOTACCESSED | TD_DP_IN;
|
|
|
|
/* TDs _could_ transfer up to 8K each */
|
|
while (data_len > TD_DATALEN_MAX) {
|
|
td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle),
|
|
data, TD_DATALEN_MAX, urb_priv);
|
|
data += TD_DATALEN_MAX;
|
|
data_len -= TD_DATALEN_MAX;
|
|
cnt++;
|
|
}
|
|
|
|
td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle), data,
|
|
data_len, urb_priv);
|
|
cnt++;
|
|
|
|
if ((urb->transfer_flags & URB_ZERO_PACKET)
|
|
&& (cnt < urb_priv->td_cnt)) {
|
|
td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle),
|
|
0, 0, urb_priv);
|
|
cnt++;
|
|
}
|
|
break;
|
|
|
|
/* control manages DATA0/DATA1 toggle per-request; SETUP resets it,
|
|
* any DATA phase works normally, and the STATUS ack is special.
|
|
*/
|
|
case PIPE_CONTROL:
|
|
/* fill a TD for the setup */
|
|
info = TD_SCC_NOTACCESSED | TD_DP_SETUP | TD_T_DATA0;
|
|
td_fill(ahcd, info, urb->setup_dma, 8, urb_priv);
|
|
cnt++;
|
|
|
|
if (data_len > 0) {
|
|
/* fill a TD for the data */
|
|
info = TD_SCC_NOTACCESSED | TD_T_DATA1;
|
|
info |= is_out ? TD_DP_OUT : TD_DP_IN;
|
|
/* NOTE: mishandles transfers >8K, some >4K */
|
|
td_fill(ahcd, info, data, data_len, urb_priv);
|
|
cnt++;
|
|
}
|
|
|
|
/* fill a TD for the ACK */
|
|
info = (is_out || data_len == 0)
|
|
? TD_SCC_NOTACCESSED | TD_DP_IN | TD_T_DATA1
|
|
: TD_SCC_NOTACCESSED | TD_DP_OUT | TD_T_DATA1;
|
|
td_fill(ahcd, info, data, 0, urb_priv);
|
|
cnt++;
|
|
|
|
break;
|
|
|
|
/* ISO has no retransmit, so no toggle;
|
|
* Each TD could handle multiple consecutive frames (interval 1);
|
|
* we could often reduce the number of TDs here.
|
|
*/
|
|
case PIPE_ISOCHRONOUS:
|
|
info = TD_SCC_NOTACCESSED;
|
|
for (cnt = 0; cnt < urb->number_of_packets; cnt++) {
|
|
int frame = urb->start_frame;
|
|
|
|
frame += cnt * urb->interval;
|
|
frame &= TD_FN_MASK;
|
|
td_fill(ahcd, info | frame,
|
|
data + urb->iso_frame_desc[cnt].offset,
|
|
urb->iso_frame_desc[cnt].length,
|
|
urb_priv);
|
|
}
|
|
admhcd_to_hcd(ahcd)->self.bandwidth_isoc_reqs++;
|
|
break;
|
|
}
|
|
|
|
if (urb_priv->td_cnt != cnt)
|
|
admhc_err(ahcd, "bad number of tds created for urb %p\n", urb);
|
|
|
|
urb_priv->td_idx = 0;
|
|
}
|
|
|
|
/* calculate transfer length/status and update the urb
|
|
* PRECONDITION: irqsafe (only for urb->status locking)
|
|
*/
|
|
static int td_done(struct admhcd *ahcd, struct urb *urb, struct td *td)
|
|
{
|
|
u32 info = hc32_to_cpup(ahcd, &td->hwINFO);
|
|
u32 dbp = hc32_to_cpup(ahcd, &td->hwDBP);
|
|
u32 cbl = TD_BL_GET(hc32_to_cpup(ahcd, &td->hwCBL));
|
|
int type = usb_pipetype(urb->pipe);
|
|
int cc;
|
|
|
|
cc = TD_CC_GET(info);
|
|
|
|
/* ISO ... drivers see per-TD length/status */
|
|
if (type == PIPE_ISOCHRONOUS) {
|
|
#if 0
|
|
/* TODO */
|
|
int dlen = 0;
|
|
|
|
/* NOTE: assumes FC in tdINFO == 0, and that
|
|
* only the first of 0..MAXPSW psws is used.
|
|
*/
|
|
|
|
cc = TD_CC_GET(td);
|
|
if (tdINFO & TD_CC) /* hc didn't touch? */
|
|
return;
|
|
|
|
if (usb_pipeout (urb->pipe))
|
|
dlen = urb->iso_frame_desc[td->index].length;
|
|
else {
|
|
/* short reads are always OK for ISO */
|
|
if (cc == TD_DATAUNDERRUN)
|
|
cc = TD_CC_NOERROR;
|
|
dlen = tdPSW & 0x3ff;
|
|
}
|
|
|
|
urb->actual_length += dlen;
|
|
urb->iso_frame_desc[td->index].actual_length = dlen;
|
|
urb->iso_frame_desc[td->index].status = cc_to_error[cc];
|
|
|
|
if (cc != TD_CC_NOERROR)
|
|
admhc_vdbg (ahcd,
|
|
"urb %p iso td %p (%d) len %d cc %d\n",
|
|
urb, td, 1 + td->index, dlen, cc);
|
|
#endif
|
|
/* BULK, INT, CONTROL ... drivers see aggregate length/status,
|
|
* except that "setup" bytes aren't counted and "short" transfers
|
|
* might not be reported as errors.
|
|
*/
|
|
} else {
|
|
admhc_dump_td(ahcd, "td_done", td);
|
|
|
|
/* count all non-empty packets except control SETUP packet */
|
|
if ((type != PIPE_CONTROL || td->index != 0) && dbp != 0) {
|
|
urb->actual_length += dbp - td->data_dma + cbl;
|
|
}
|
|
}
|
|
|
|
return cc;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static inline struct td *
|
|
ed_halted(struct admhcd *ahcd, struct td *td, int cc, struct td *rev)
|
|
{
|
|
#if 0
|
|
struct urb *urb = td->urb;
|
|
struct ed *ed = td->ed;
|
|
struct list_head *tmp = td->td_list.next;
|
|
__hc32 toggle = ed->hwHeadP & cpu_to_hc32 (ahcd, ED_C);
|
|
|
|
admhc_dump_ed(ahcd, "ed halted", td->ed, 1);
|
|
/* clear ed halt; this is the td that caused it, but keep it inactive
|
|
* until its urb->complete() has a chance to clean up.
|
|
*/
|
|
ed->hwINFO |= cpu_to_hc32 (ahcd, ED_SKIP);
|
|
wmb ();
|
|
ed->hwHeadP &= ~cpu_to_hc32 (ahcd, ED_H);
|
|
|
|
/* put any later tds from this urb onto the donelist, after 'td',
|
|
* order won't matter here: no errors, and nothing was transferred.
|
|
* also patch the ed so it looks as if those tds completed normally.
|
|
*/
|
|
while (tmp != &ed->td_list) {
|
|
struct td *next;
|
|
__hc32 info;
|
|
|
|
next = list_entry(tmp, struct td, td_list);
|
|
tmp = next->td_list.next;
|
|
|
|
if (next->urb != urb)
|
|
break;
|
|
|
|
/* NOTE: if multi-td control DATA segments get supported,
|
|
* this urb had one of them, this td wasn't the last td
|
|
* in that segment (TD_R clear), this ed halted because
|
|
* of a short read, _and_ URB_SHORT_NOT_OK is clear ...
|
|
* then we need to leave the control STATUS packet queued
|
|
* and clear ED_SKIP.
|
|
*/
|
|
info = next->hwINFO;
|
|
#if 0 /* FIXME */
|
|
info |= cpu_to_hc32 (ahcd, TD_DONE);
|
|
info &= ~cpu_to_hc32 (ahcd, TD_CC);
|
|
#endif
|
|
next->hwINFO = info;
|
|
|
|
next->next_dl_td = rev;
|
|
rev = next;
|
|
|
|
ed->hwHeadP = next->hwNextTD | toggle;
|
|
}
|
|
|
|
/* help for troubleshooting: report anything that
|
|
* looks odd ... that doesn't include protocol stalls
|
|
* (or maybe some other things)
|
|
*/
|
|
switch (cc) {
|
|
case TD_CC_DATAUNDERRUN:
|
|
if ((urb->transfer_flags & URB_SHORT_NOT_OK) == 0)
|
|
break;
|
|
/* fallthrough */
|
|
case TD_CC_STALL:
|
|
if (usb_pipecontrol (urb->pipe))
|
|
break;
|
|
/* fallthrough */
|
|
default:
|
|
admhc_dbg (ahcd,
|
|
"urb %p path %s ep%d%s %08x cc %d --> status %d\n",
|
|
urb, urb->dev->devpath,
|
|
usb_pipeendpoint (urb->pipe),
|
|
usb_pipein (urb->pipe) ? "in" : "out",
|
|
hc32_to_cpu(ahcd, td->hwINFO),
|
|
cc, cc_to_error [cc]);
|
|
}
|
|
|
|
return rev;
|
|
#else
|
|
return NULL;
|
|
#endif
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int ed_next_urb(struct admhcd *ahcd, struct ed *ed)
|
|
{
|
|
struct urb_priv *up;
|
|
u32 carry;
|
|
|
|
if (ed->state != ED_IDLE)
|
|
return 1;
|
|
|
|
if (ed->urb_active)
|
|
return 1;
|
|
|
|
if (list_empty(&ed->urb_pending))
|
|
return 0;
|
|
|
|
up = list_entry(ed->urb_pending.next, struct urb_priv, pending);
|
|
list_del(&up->pending);
|
|
ed->urb_active = up;
|
|
ed->state = ED_OPER;
|
|
|
|
#ifdef ADMHC_VERBOSE_DEBUG
|
|
urb_print(ahcd, up->urb, "NEXT", 0);
|
|
admhc_dump_ed(ahcd, " ", ed, 0);
|
|
#endif
|
|
|
|
up->td[up->td_cnt-1]->hwNextTD = cpu_to_hc32(ahcd, ed->dummy->td_dma);
|
|
|
|
carry = hc32_to_cpup(ahcd, &ed->hwHeadP) & ED_C;
|
|
ed->hwHeadP = cpu_to_hc32(ahcd, up->td[0]->td_dma | carry);
|
|
ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void ed_update(struct admhcd *ahcd, struct ed *ed, int partial)
|
|
{
|
|
struct urb_priv *up;
|
|
struct urb *urb;
|
|
int cc;
|
|
|
|
up = ed->urb_active;
|
|
if (!up)
|
|
return;
|
|
|
|
urb = up->urb;
|
|
|
|
#ifdef ADMHC_VERBOSE_DEBUG
|
|
urb_print(ahcd, urb, "UPDATE", 0);
|
|
#endif
|
|
admhc_dump_ed(ahcd, "ED-UPDATE", ed, 1);
|
|
|
|
cc = TD_CC_NOERROR;
|
|
for (; up->td_idx < up->td_cnt; up->td_idx++) {
|
|
struct td *td = up->td[up->td_idx];
|
|
|
|
if (hc32_to_cpup(ahcd, &td->hwINFO) & TD_OWN)
|
|
break;
|
|
|
|
cc = td_done(ahcd, urb, td);
|
|
if (cc != TD_CC_NOERROR) {
|
|
admhc_vdbg(ahcd,
|
|
"urb %p td %p (%d) cc %d, len=%d/%d\n",
|
|
urb, td, td->index, cc,
|
|
urb->actual_length,
|
|
urb->transfer_buffer_length);
|
|
|
|
up->td_idx = up->td_cnt;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if ((up->td_idx != up->td_cnt) && (!partial))
|
|
/* the URB is not completed yet */
|
|
return;
|
|
|
|
/* update packet status if needed (short is normally ok) */
|
|
if (cc == TD_CC_DATAUNDERRUN
|
|
&& !(urb->transfer_flags & URB_SHORT_NOT_OK))
|
|
cc = TD_CC_NOERROR;
|
|
|
|
if (cc != TD_CC_NOERROR && cc < TD_CC_HCD0) {
|
|
spin_lock(&urb->lock);
|
|
if (urb->status == -EINPROGRESS)
|
|
urb->status = cc_to_error[cc];
|
|
spin_unlock(&urb->lock);
|
|
}
|
|
|
|
finish_urb(ahcd, urb);
|
|
|
|
ed->urb_active = NULL;
|
|
ed->state = ED_IDLE;
|
|
}
|
|
|
|
/* there are some tds completed; called in_irq(), with HCD locked */
|
|
static void admhc_td_complete(struct admhcd *ahcd)
|
|
{
|
|
struct ed *ed;
|
|
|
|
for (ed = ahcd->ed_head; ed; ed = ed->ed_next) {
|
|
if (ed->state != ED_OPER)
|
|
continue;
|
|
|
|
if (hc32_to_cpup(ahcd, &ed->hwINFO) & ED_SKIP)
|
|
continue;
|
|
|
|
if (hc32_to_cpup(ahcd, &ed->hwHeadP) & ED_H) {
|
|
/* TODO */
|
|
continue;
|
|
}
|
|
|
|
ed_update(ahcd, ed, 0);
|
|
}
|
|
}
|
|
|
|
/* there are some urbs/eds to unlink; called in_irq(), with HCD locked */
|
|
static void admhc_finish_unlinks(struct admhcd *ahcd, u16 tick)
|
|
{
|
|
struct ed *ed;
|
|
|
|
for (ed = ahcd->ed_head; ed; ed = ed->ed_next) {
|
|
if (ed->state != ED_UNLINK)
|
|
continue;
|
|
|
|
if (likely(HC_IS_RUNNING(admhcd_to_hcd(ahcd)->state)))
|
|
if (tick_before(tick, ed->tick))
|
|
continue;
|
|
|
|
/* process partial status */
|
|
ed_update(ahcd, ed, 1);
|
|
}
|
|
}
|
|
|
|
static void admhc_sof_refill(struct admhcd *ahcd)
|
|
{
|
|
struct ed *ed;
|
|
int disable_dma = 1;
|
|
|
|
for (ed = ahcd->ed_head; ed; ed = ed->ed_next) {
|
|
|
|
if (hc32_to_cpup(ahcd, &ed->hwHeadP) & ED_H) {
|
|
ed_update(ahcd, ed, 1);
|
|
ed->hwHeadP &= ~cpu_to_hc32 (ahcd, ED_H);
|
|
}
|
|
|
|
if (ed_next_urb(ahcd, ed)) {
|
|
disable_dma = 0;
|
|
} else {
|
|
struct ed *tmp;
|
|
tmp = ed->ed_prev;
|
|
ed_deschedule(ahcd, ed);
|
|
ed = tmp;
|
|
}
|
|
}
|
|
|
|
if (disable_dma) {
|
|
admhc_intr_disable(ahcd, ADMHC_INTR_SOFI);
|
|
admhc_dma_disable(ahcd);
|
|
} else {
|
|
admhc_intr_enable(ahcd, ADMHC_INTR_SOFI);
|
|
admhc_dma_enable(ahcd);
|
|
}
|
|
}
|