1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-25 17:55:31 +02:00
openwrt-xburst/package/nvram/Makefile
florian edc292ce9d [package] nvvram: no checksum error recording on WRT54G3GV2(-VF)
The CFE of the WRT54G3GV2 expects two firmware images, if one of them
produces a CRC error (which is the case after you installed OpenWrt, as
there is no second image), it writes one of three consecutive bytes to
the flash. (Look for "Image Status : IMG2_BAD" during boot.)

After the third boot with a CRC error, it stops and waits for a new
firmware image. To prevent this 'noset_try_flag' must be set to 1 on boot.

Tested with my own box.

Signed-off-by: Niclas Koeser <nks at informatik.uni-kiel.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23007 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-11 18:37:09 +00:00

60 lines
1.4 KiB
Makefile

#
# Copyright (C) 2009-2010 Jo-Philipp Wich <xm@subsignal.org>
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
PKG_NAME:=nvram
PKG_RELEASE:=9
PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
include $(INCLUDE_DIR)/package.mk
define Package/nvram
SECTION:=utils
CATEGORY:=Base system
TITLE:=Userspace port of the Broadcom NVRAM manipulation tool
DEPENDS:=@TARGET_brcm47xx||@TARGET_ar71xx
endef
define Package/nvram/description
This package contains an utility to manipulate NVRAM on Broadcom based devices.
It works on bcm47xx (Linux 2.6) without using the kernel api.
endef
define Build/Prepare
mkdir -p $(PKG_BUILD_DIR)
$(CP) ./src/* $(PKG_BUILD_DIR)/
endef
define Build/Configure
endef
define Build/Compile
$(MAKE) -C $(PKG_BUILD_DIR) \
CC="$(TARGET_CC)" \
CFLAGS="$(TARGET_CFLAGS) -Wall" \
LDFLAGS="$(TARGET_LDFLAGS)"
endef
define Build/InstallDev
$(INSTALL_DIR) $(1)/usr/lib
$(INSTALL_BIN) $(PKG_BUILD_DIR)/libnvram.so.0.1 $(1)/usr/lib/
ln -s libnvram.so.0.1 $(1)/usr/lib/libnvram.so
endef
define Package/nvram/install
$(INSTALL_DIR) $(1)/etc/init.d
$(INSTALL_BIN) ./files/nvram.init $(1)/etc/init.d/nvram
$(INSTALL_DIR) $(1)/usr/sbin
$(INSTALL_BIN) $(PKG_BUILD_DIR)/nvram $(1)/usr/sbin/
$(INSTALL_DIR) $(1)/usr/lib
$(INSTALL_BIN) $(PKG_BUILD_DIR)/libnvram.so.0.1 $(1)/usr/lib/
endef
$(eval $(call BuildPackage,nvram))