mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-29 00:57:31 +02:00
28840 lines
732 KiB
Diff
28840 lines
732 KiB
Diff
--- linux-2.6.24.7.old/arch/mips/Kconfig 2008-05-07 01:22:34.000000000 +0200
|
|
+++ linux-2.6.24.7/arch/mips/Kconfig 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -16,6 +16,82 @@
|
|
prompt "System type"
|
|
default SGI_IP22
|
|
|
|
+config JZ4730_PMP
|
|
+ bool "Ingenic JZ4730 PMP board"
|
|
+ select DMA_NONCOHERENT
|
|
+ select SYS_HAS_CPU_MIPS32_R1
|
|
+ select SYS_SUPPORTS_32BIT_KERNEL
|
|
+ select SYS_SUPPORTS_LITTLE_ENDIAN
|
|
+ select SOC_JZ4730
|
|
+
|
|
+config JZ4740_PAVO
|
|
+ bool "Ingenic JZ4740 PAVO board"
|
|
+ select DMA_NONCOHERENT
|
|
+ select SYS_HAS_CPU_MIPS32_R1
|
|
+ select SYS_SUPPORTS_32BIT_KERNEL
|
|
+ select SYS_SUPPORTS_LITTLE_ENDIAN
|
|
+ select SOC_JZ4740
|
|
+
|
|
+config JZ4740_LEO
|
|
+ bool "Ingenic JZ4740 LEO board"
|
|
+ select DMA_NONCOHERENT
|
|
+ select SYS_HAS_CPU_MIPS32_R1
|
|
+ select SYS_SUPPORTS_32BIT_KERNEL
|
|
+ select SYS_SUPPORTS_LITTLE_ENDIAN
|
|
+ select SOC_JZ4740
|
|
+
|
|
+config JZ4740_LYRA
|
|
+ bool "Ingenic JZ4740 LYRA board"
|
|
+ select DMA_NONCOHERENT
|
|
+ select SYS_HAS_CPU_MIPS32_R1
|
|
+ select SYS_SUPPORTS_32BIT_KERNEL
|
|
+ select SYS_SUPPORTS_LITTLE_ENDIAN
|
|
+ select SOC_JZ4740
|
|
+
|
|
+config JZ4725_DIPPER
|
|
+ bool "Ingenic JZ4725 DIPPER board"
|
|
+ select DMA_NONCOHERENT
|
|
+ select SYS_HAS_CPU_MIPS32_R1
|
|
+ select SYS_SUPPORTS_32BIT_KERNEL
|
|
+ select SYS_SUPPORTS_LITTLE_ENDIAN
|
|
+ select SOC_JZ4740
|
|
+ select SOC_JZ4725
|
|
+
|
|
+config JZ4720_VIRGO
|
|
+ bool "Ingenic JZ4720 VIRGO board"
|
|
+ select DMA_NONCOHERENT
|
|
+ select SYS_HAS_CPU_MIPS32_R1
|
|
+ select SYS_SUPPORTS_32BIT_KERNEL
|
|
+ select SYS_SUPPORTS_LITTLE_ENDIAN
|
|
+ select SOC_JZ4740
|
|
+ select SOC_JZ4720
|
|
+
|
|
+config JZ4750_FUWA
|
|
+ bool "Ingenic JZ4750 FUWA board"
|
|
+ select DMA_NONCOHERENT
|
|
+ select SYS_HAS_CPU_MIPS32_R1
|
|
+ select SYS_SUPPORTS_32BIT_KERNEL
|
|
+ select SYS_SUPPORTS_LITTLE_ENDIAN
|
|
+ select SOC_JZ4750
|
|
+ select JZ_FPGA
|
|
+
|
|
+config JZ4750D_FUWA1
|
|
+ bool "Ingenic JZ4750d FUWA1 board"
|
|
+ select DMA_NONCOHERENT
|
|
+ select SYS_HAS_CPU_MIPS32_R1
|
|
+ select SYS_SUPPORTS_32BIT_KERNEL
|
|
+ select SYS_SUPPORTS_LITTLE_ENDIAN
|
|
+ select SOC_JZ4750D
|
|
+ select JZ_FPGA
|
|
+
|
|
+config JZ4750_APUS
|
|
+ bool "Ingenic JZ4750 APUS board"
|
|
+ select DMA_NONCOHERENT
|
|
+ select SYS_HAS_CPU_MIPS32_R1
|
|
+ select SYS_SUPPORTS_32BIT_KERNEL
|
|
+ select SYS_SUPPORTS_LITTLE_ENDIAN
|
|
+ select SOC_JZ4750
|
|
+
|
|
config MACH_ALCHEMY
|
|
bool "Alchemy processor based machines"
|
|
|
|
@@ -701,6 +777,48 @@
|
|
|
|
endmenu
|
|
|
|
+#####################################################
|
|
+# Ingenic SOC series
|
|
+#####################################################
|
|
+
|
|
+config SOC_JZ4730
|
|
+ bool
|
|
+ select JZSOC
|
|
+
|
|
+config SOC_JZ4740
|
|
+ bool
|
|
+ select JZSOC
|
|
+
|
|
+config SOC_JZ4725
|
|
+ bool
|
|
+ select JZSOC
|
|
+
|
|
+config SOC_JZ4720
|
|
+ bool
|
|
+ select JZSOC
|
|
+
|
|
+config SOC_JZ4750
|
|
+ bool
|
|
+ select JZSOC
|
|
+
|
|
+config SOC_JZ4750D
|
|
+ bool
|
|
+ select JZSOC
|
|
+
|
|
+config JZ_FPGA
|
|
+ bool
|
|
+
|
|
+config JZSOC
|
|
+ bool
|
|
+ select JZRISC
|
|
+ select SYS_HAS_CPU_MIPS32_R1
|
|
+ select SYS_SUPPORTS_32BIT_KERNEL
|
|
+
|
|
+config JZRISC
|
|
+ bool
|
|
+
|
|
+####################################################
|
|
+
|
|
config RWSEM_GENERIC_SPINLOCK
|
|
bool
|
|
default y
|
|
@@ -1770,6 +1888,14 @@
|
|
|
|
source "kernel/time/Kconfig"
|
|
|
|
+# the value of (max order + 1)
|
|
+config FORCE_MAX_ZONEORDER
|
|
+ prompt "MAX_ZONEORDER"
|
|
+ int
|
|
+ default "12"
|
|
+ help
|
|
+ The max memory that can be allocated = 4KB * 2^(CONFIG_FORCE_MAX_ZONEORDER - 1)
|
|
+
|
|
#
|
|
# Timer Interrupt Frequency Configuration
|
|
#
|
|
@@ -2046,6 +2172,23 @@
|
|
|
|
endmenu
|
|
|
|
+menu "CPU Frequency scaling"
|
|
+
|
|
+config CPU_FREQ_JZ
|
|
+ tristate "CPUfreq driver for JZ CPUs"
|
|
+ depends on JZSOC
|
|
+ default n
|
|
+ help
|
|
+ This enables the CPUfreq driver for JZ CPUs.
|
|
+
|
|
+ If in doubt, say N.
|
|
+
|
|
+if (CPU_FREQ_JZ)
|
|
+source "drivers/cpufreq/Kconfig"
|
|
+endif
|
|
+
|
|
+endmenu
|
|
+
|
|
menu "Power management options"
|
|
|
|
source "kernel/power/Kconfig"
|
|
--- linux-2.6.24.7.old/arch/mips/Makefile 2009-04-12 18:05:07.000000000 +0200
|
|
+++ linux-2.6.24.7/arch/mips/Makefile 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -159,6 +159,37 @@
|
|
#
|
|
|
|
#
|
|
+# Commond Ingenic JZ4730 series
|
|
+#
|
|
+core-$(CONFIG_SOC_JZ4730) += arch/mips/jz4730/
|
|
+cflags-$(CONFIG_SOC_JZ4730) += -Iarch/mips/include/asm/mach-jz4730
|
|
+load-$(CONFIG_SOC_JZ4730) += 0xffffffff80010000
|
|
+
|
|
+#
|
|
+# Commond Ingenic JZ4740 series
|
|
+#
|
|
+
|
|
+core-$(CONFIG_SOC_JZ4740) += arch/mips/jz4740/
|
|
+cflags-$(CONFIG_SOC_JZ4740) += -Iarch/mips/include/asm/mach-jz4740
|
|
+load-$(CONFIG_SOC_JZ4740) += 0xffffffff80010000
|
|
+
|
|
+#
|
|
+# Commond Ingenic JZ4750 series
|
|
+#
|
|
+
|
|
+core-$(CONFIG_SOC_JZ4750) += arch/mips/jz4750/
|
|
+cflags-$(CONFIG_SOC_JZ4750) += -Iarch/mips/include/asm/mach-jz4750
|
|
+load-$(CONFIG_SOC_JZ4750) += 0xffffffff80010000
|
|
+
|
|
+#
|
|
+# Commond Ingenic JZ4750d series
|
|
+#
|
|
+
|
|
+core-$(CONFIG_SOC_JZ4750D) += arch/mips/jz4750d/
|
|
+cflags-$(CONFIG_SOC_JZ4750D) += -Iarch/mips/include/asm/mach-jz4750d
|
|
+load-$(CONFIG_SOC_JZ4750D) += 0xffffffff80010000
|
|
+
|
|
+#
|
|
# Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
|
|
#
|
|
core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
|
|
@@ -673,6 +704,12 @@
|
|
|
|
all: $(all-y)
|
|
|
|
+uImage: $(vmlinux-32)
|
|
+ +@$(call makeboot,$@)
|
|
+
|
|
+zImage: $(vmlinux-32)
|
|
+ +@$(call makeboot,$@)
|
|
+
|
|
vmlinux.bin: $(vmlinux-32)
|
|
+@$(call makeboot,$@)
|
|
|
|
@@ -697,12 +734,13 @@
|
|
|
|
archclean:
|
|
@$(MAKE) $(clean)=arch/mips/boot
|
|
+ @$(MAKE) $(clean)=arch/mips/boot/compressed
|
|
@$(MAKE) $(clean)=arch/mips/lasat
|
|
|
|
define archhelp
|
|
- echo ' vmlinux.ecoff - ECOFF boot image'
|
|
- echo ' vmlinux.bin - Raw binary boot image'
|
|
- echo ' vmlinux.srec - SREC boot image'
|
|
+ echo ' uImage - u-boot format image (arch/$(ARCH)/boot/uImage)'
|
|
+ echo ' zImage - Compressed binary image (arch/$(ARCH)/boot/compressed/zImage)'
|
|
+ echo ' vmlinux.bin - Uncompressed binary image (arch/$(ARCH)/boot/vmlinux.bin)'
|
|
echo
|
|
echo ' These will be default as apropriate for a configured platform.'
|
|
endef
|
|
--- linux-2.6.24.7.old/arch/mips/boot/Makefile 2008-05-07 01:22:34.000000000 +0200
|
|
+++ linux-2.6.24.7/arch/mips/boot/Makefile 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -7,6 +7,9 @@
|
|
# Copyright (C) 2004 Maciej W. Rozycki
|
|
#
|
|
|
|
+# This one must match the LOADADDR in arch/mips/Makefile!
|
|
+LOADADDR=0x80010000
|
|
+
|
|
#
|
|
# Some DECstations need all possible sections of an ECOFF executable
|
|
#
|
|
@@ -25,7 +28,7 @@
|
|
|
|
VMLINUX = vmlinux
|
|
|
|
-all: vmlinux.ecoff vmlinux.srec addinitrd
|
|
+all: vmlinux.ecoff vmlinux.srec addinitrd uImage zImage
|
|
|
|
vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX)
|
|
$(obj)/elf2ecoff $(VMLINUX) vmlinux.ecoff $(E2EFLAGS)
|
|
@@ -42,8 +45,24 @@
|
|
$(obj)/addinitrd: $(obj)/addinitrd.c
|
|
$(HOSTCC) -o $@ $^
|
|
|
|
+uImage: $(VMLINUX) vmlinux.bin
|
|
+ rm -f $(obj)/vmlinux.bin.gz
|
|
+ gzip -9 $(obj)/vmlinux.bin
|
|
+ mkimage -A mips -O linux -T kernel -C gzip \
|
|
+ -a $(LOADADDR) -e $(shell sh ./$(obj)/tools/entry $(NM) $(VMLINUX) ) \
|
|
+ -n 'Linux-$(KERNELRELEASE)' \
|
|
+ -d $(obj)/vmlinux.bin.gz $(obj)/uImage
|
|
+ @echo ' Kernel: arch/mips/boot/$@ is ready'
|
|
+
|
|
+zImage:
|
|
+ $(Q)$(MAKE) $(build)=$(obj)/compressed loadaddr=$(LOADADDR) $@
|
|
+ @echo ' Kernel: arch/mips/boot/compressed/$@ is ready'
|
|
+
|
|
clean-files += addinitrd \
|
|
elf2ecoff \
|
|
vmlinux.bin \
|
|
vmlinux.ecoff \
|
|
- vmlinux.srec
|
|
+ vmlinux.srec \
|
|
+ vmlinux.bin.gz \
|
|
+ uImage \
|
|
+ zImage
|
|
--- linux-2.6.24.7.old/arch/mips/boot/compressed/Makefile 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/boot/compressed/Makefile 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,42 @@
|
|
+#
|
|
+# linux/arch/mips/boot/compressed/Makefile
|
|
+#
|
|
+# create a compressed zImage from the original vmlinux
|
|
+#
|
|
+
|
|
+targets := zImage vmlinuz vmlinux.bin.gz head.o misc.o piggy.o dummy.o
|
|
+
|
|
+OBJS := $(obj)/head.o $(obj)/misc.o
|
|
+
|
|
+LD_ARGS := -T $(obj)/ld.script -Ttext 0x80600000 -Bstatic
|
|
+OBJCOPY_ARGS := -O elf32-tradlittlemips
|
|
+
|
|
+ENTRY := $(obj)/../tools/entry
|
|
+FILESIZE := $(obj)/../tools/filesize
|
|
+
|
|
+drop-sections = .reginfo .mdebug .comment .note .pdr .options .MIPS.options
|
|
+strip-flags = $(addprefix --remove-section=,$(drop-sections))
|
|
+
|
|
+
|
|
+$(obj)/vmlinux.bin.gz: vmlinux
|
|
+ rm -f $(obj)/vmlinux.bin.gz
|
|
+ $(OBJCOPY) -O binary $(strip-flags) vmlinux $(obj)/vmlinux.bin
|
|
+ gzip -v9f $(obj)/vmlinux.bin
|
|
+
|
|
+$(obj)/head.o: $(obj)/head.S $(obj)/vmlinux.bin.gz vmlinux
|
|
+ $(CC) $(KBUILD_AFLAGS) \
|
|
+ -DIMAGESIZE=$(shell sh $(FILESIZE) $(obj)/vmlinux.bin.gz) \
|
|
+ -DKERNEL_ENTRY=$(shell sh $(ENTRY) $(NM) vmlinux ) \
|
|
+ -DLOADADDR=$(loadaddr) \
|
|
+ -c -o $(obj)/head.o $<
|
|
+
|
|
+$(obj)/vmlinuz: $(OBJS) $(obj)/ld.script $(obj)/vmlinux.bin.gz $(obj)/dummy.o
|
|
+ $(OBJCOPY) \
|
|
+ --add-section=.image=$(obj)/vmlinux.bin.gz \
|
|
+ --set-section-flags=.image=contents,alloc,load,readonly,data \
|
|
+ $(obj)/dummy.o $(obj)/piggy.o
|
|
+ $(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/piggy.o
|
|
+ $(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap
|
|
+
|
|
+zImage: $(obj)/vmlinuz
|
|
+ $(OBJCOPY) -O binary $(obj)/vmlinuz $(obj)/zImage
|
|
--- linux-2.6.24.7.old/arch/mips/boot/compressed/dummy.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/boot/compressed/dummy.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,4 @@
|
|
+int main(void)
|
|
+{
|
|
+ return 0;
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/boot/compressed/head.S 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/boot/compressed/head.S 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,85 @@
|
|
+/*
|
|
+ * linux/arch/mips/boot/compressed/head.S
|
|
+ *
|
|
+ * Copyright (C) 2005-2008 Ingenic Semiconductor Inc.
|
|
+ */
|
|
+
|
|
+#include <asm/asm.h>
|
|
+#include <asm/cacheops.h>
|
|
+#include <asm/cachectl.h>
|
|
+#include <asm/regdef.h>
|
|
+
|
|
+#define IndexInvalidate_I 0x00
|
|
+#define IndexWriteBack_D 0x01
|
|
+
|
|
+ .set noreorder
|
|
+ LEAF(startup)
|
|
+startup:
|
|
+ move s0, a0 /* Save the boot loader transfered args */
|
|
+ move s1, a1
|
|
+ move s2, a2
|
|
+ move s3, a3
|
|
+
|
|
+ la a0, _edata
|
|
+ la a1, _end
|
|
+1: sw zero, 0(a0) /* Clear BSS section */
|
|
+ bne a1, a0, 1b
|
|
+ addu a0, 4
|
|
+
|
|
+ la sp, (.stack + 8192)
|
|
+
|
|
+ la a0, __image_begin
|
|
+ la a1, IMAGESIZE
|
|
+ la a2, LOADADDR
|
|
+ la ra, 1f
|
|
+ la k0, decompress_kernel
|
|
+ jr k0
|
|
+ nop
|
|
+1:
|
|
+
|
|
+ move a0, s0
|
|
+ move a1, s1
|
|
+ move a2, s2
|
|
+ move a3, s3
|
|
+ li k0, KERNEL_ENTRY
|
|
+ jr k0
|
|
+ nop
|
|
+2:
|
|
+ b 32
|
|
+ END(startup)
|
|
+
|
|
+
|
|
+ LEAF(flushcaches)
|
|
+ la t0, 1f
|
|
+ la t1, 0xa0000000
|
|
+ or t0, t0, t1
|
|
+ jr t0
|
|
+ nop
|
|
+1:
|
|
+ li k0, 0x80000000 # start address
|
|
+ li k1, 0x80004000 # end address (16KB I-Cache)
|
|
+ subu k1, 128
|
|
+
|
|
+2:
|
|
+ .set mips3
|
|
+ cache IndexWriteBack_D, 0(k0)
|
|
+ cache IndexWriteBack_D, 32(k0)
|
|
+ cache IndexWriteBack_D, 64(k0)
|
|
+ cache IndexWriteBack_D, 96(k0)
|
|
+ cache IndexInvalidate_I, 0(k0)
|
|
+ cache IndexInvalidate_I, 32(k0)
|
|
+ cache IndexInvalidate_I, 64(k0)
|
|
+ cache IndexInvalidate_I, 96(k0)
|
|
+ .set mips0
|
|
+
|
|
+ bne k0, k1, 2b
|
|
+ addu k0, k0, 128
|
|
+ la t0, 3f
|
|
+ jr t0
|
|
+ nop
|
|
+3:
|
|
+ jr ra
|
|
+ nop
|
|
+ END(flushcaches)
|
|
+
|
|
+ .comm .stack,4096*2,4
|
|
--- linux-2.6.24.7.old/arch/mips/boot/compressed/ld.script 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/boot/compressed/ld.script 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,151 @@
|
|
+OUTPUT_ARCH(mips)
|
|
+ENTRY(startup)
|
|
+SECTIONS
|
|
+{
|
|
+ /* Read-only sections, merged into text segment: */
|
|
+
|
|
+ .init : { *(.init) } =0
|
|
+ .text :
|
|
+ {
|
|
+ _ftext = . ;
|
|
+ *(.text)
|
|
+ *(.rodata)
|
|
+ *(.rodata1)
|
|
+ /* .gnu.warning sections are handled specially by elf32.em. */
|
|
+ *(.gnu.warning)
|
|
+ } =0
|
|
+ .kstrtab : { *(.kstrtab) }
|
|
+
|
|
+ . = ALIGN(16); /* Exception table */
|
|
+ __start___ex_table = .;
|
|
+ __ex_table : { *(__ex_table) }
|
|
+ __stop___ex_table = .;
|
|
+
|
|
+ __start___dbe_table = .; /* Exception table for data bus errors */
|
|
+ __dbe_table : { *(__dbe_table) }
|
|
+ __stop___dbe_table = .;
|
|
+
|
|
+ __start___ksymtab = .; /* Kernel symbol table */
|
|
+ __ksymtab : { *(__ksymtab) }
|
|
+ __stop___ksymtab = .;
|
|
+
|
|
+ _etext = .;
|
|
+
|
|
+ . = ALIGN(8192);
|
|
+ .data.init_task : { *(.data.init_task) }
|
|
+
|
|
+ /* Startup code */
|
|
+ . = ALIGN(4096);
|
|
+ __init_begin = .;
|
|
+ .text.init : { *(.text.init) }
|
|
+ .data.init : { *(.data.init) }
|
|
+ . = ALIGN(16);
|
|
+ __setup_start = .;
|
|
+ .setup.init : { *(.setup.init) }
|
|
+ __setup_end = .;
|
|
+ __initcall_start = .;
|
|
+ .initcall.init : { *(.initcall.init) }
|
|
+ __initcall_end = .;
|
|
+ . = ALIGN(4096); /* Align double page for init_task_union */
|
|
+ __init_end = .;
|
|
+
|
|
+ . = ALIGN(4096);
|
|
+ .data.page_aligned : { *(.data.idt) }
|
|
+
|
|
+ . = ALIGN(32);
|
|
+ .data.cacheline_aligned : { *(.data.cacheline_aligned) }
|
|
+
|
|
+ .fini : { *(.fini) } =0
|
|
+ .reginfo : { *(.reginfo) }
|
|
+ /* Adjust the address for the data segment. We want to adjust up to
|
|
+ the same address within the page on the next page up. It would
|
|
+ be more correct to do this:
|
|
+ . = .;
|
|
+ The current expression does not correctly handle the case of a
|
|
+ text segment ending precisely at the end of a page; it causes the
|
|
+ data segment to skip a page. The above expression does not have
|
|
+ this problem, but it will currently (2/95) cause BFD to allocate
|
|
+ a single segment, combining both text and data, for this case.
|
|
+ This will prevent the text segment from being shared among
|
|
+ multiple executions of the program; I think that is more
|
|
+ important than losing a page of the virtual address space (note
|
|
+ that no actual memory is lost; the page which is skipped can not
|
|
+ be referenced). */
|
|
+ . = .;
|
|
+ .data :
|
|
+ {
|
|
+ _fdata = . ;
|
|
+ *(.data)
|
|
+
|
|
+ /* Put the compressed image here, so bss is on the end. */
|
|
+ __image_begin = .;
|
|
+ *(.image)
|
|
+ __image_end = .;
|
|
+ /* Align the initial ramdisk image (INITRD) on page boundaries. */
|
|
+ . = ALIGN(4096);
|
|
+ __ramdisk_begin = .;
|
|
+ *(.initrd)
|
|
+ __ramdisk_end = .;
|
|
+ . = ALIGN(4096);
|
|
+
|
|
+ CONSTRUCTORS
|
|
+ }
|
|
+ .data1 : { *(.data1) }
|
|
+ _gp = . + 0x8000;
|
|
+ .lit8 : { *(.lit8) }
|
|
+ .lit4 : { *(.lit4) }
|
|
+ .ctors : { *(.ctors) }
|
|
+ .dtors : { *(.dtors) }
|
|
+ .got : { *(.got.plt) *(.got) }
|
|
+ .dynamic : { *(.dynamic) }
|
|
+ /* We want the small data sections together, so single-instruction offsets
|
|
+ can access them all, and initialized data all before uninitialized, so
|
|
+ we can shorten the on-disk segment size. */
|
|
+ .sdata : { *(.sdata) }
|
|
+ . = ALIGN(4);
|
|
+ _edata = .;
|
|
+ PROVIDE (edata = .);
|
|
+
|
|
+ __bss_start = .;
|
|
+ _fbss = .;
|
|
+ .sbss : { *(.sbss) *(.scommon) }
|
|
+ .bss :
|
|
+ {
|
|
+ *(.dynbss)
|
|
+ *(.bss)
|
|
+ *(COMMON)
|
|
+ . = ALIGN(4);
|
|
+ _end = . ;
|
|
+ PROVIDE (end = .);
|
|
+ }
|
|
+
|
|
+ /* Sections to be discarded */
|
|
+ /DISCARD/ :
|
|
+ {
|
|
+ *(.text.exit)
|
|
+ *(.data.exit)
|
|
+ *(.exitcall.exit)
|
|
+ }
|
|
+
|
|
+ /* This is the MIPS specific mdebug section. */
|
|
+ .mdebug : { *(.mdebug) }
|
|
+ /* These are needed for ELF backends which have not yet been
|
|
+ converted to the new style linker. */
|
|
+ .stab 0 : { *(.stab) }
|
|
+ .stabstr 0 : { *(.stabstr) }
|
|
+ /* DWARF debug sections.
|
|
+ Symbols in the .debug DWARF section are relative to the beginning of the
|
|
+ section so we begin .debug at 0. It's not clear yet what needs to happen
|
|
+ for the others. */
|
|
+ .debug 0 : { *(.debug) }
|
|
+ .debug_srcinfo 0 : { *(.debug_srcinfo) }
|
|
+ .debug_aranges 0 : { *(.debug_aranges) }
|
|
+ .debug_pubnames 0 : { *(.debug_pubnames) }
|
|
+ .debug_sfnames 0 : { *(.debug_sfnames) }
|
|
+ .line 0 : { *(.line) }
|
|
+ /* These must appear regardless of . */
|
|
+ .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
|
|
+ .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
|
|
+ .comment : { *(.comment) }
|
|
+ .note : { *(.note) }
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/boot/compressed/misc.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/boot/compressed/misc.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,242 @@
|
|
+/*
|
|
+ * linux/arch/mips/boot/compressed/misc.c
|
|
+ *
|
|
+ * This is a collection of several routines from gzip-1.0.3
|
|
+ * adapted for Linux.
|
|
+ *
|
|
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
|
|
+ *
|
|
+ * Adapted for JZSOC by Peter Wei, 2008
|
|
+ *
|
|
+ */
|
|
+
|
|
+#define size_t int
|
|
+#define NULL 0
|
|
+
|
|
+/*
|
|
+ * gzip declarations
|
|
+ */
|
|
+
|
|
+#define OF(args) args
|
|
+#define STATIC static
|
|
+
|
|
+#undef memset
|
|
+#undef memcpy
|
|
+#define memzero(s, n) memset ((s), 0, (n))
|
|
+
|
|
+typedef unsigned char uch;
|
|
+typedef unsigned short ush;
|
|
+typedef unsigned long ulg;
|
|
+
|
|
+#define WSIZE 0x8000 /* Window size must be at least 32k, */
|
|
+ /* and a power of two */
|
|
+
|
|
+static uch *inbuf; /* input buffer */
|
|
+static uch window[WSIZE]; /* Sliding window buffer */
|
|
+
|
|
+static unsigned insize = 0; /* valid bytes in inbuf */
|
|
+static unsigned inptr = 0; /* index of next byte to be processed in inbuf */
|
|
+static unsigned outcnt = 0; /* bytes in output buffer */
|
|
+
|
|
+/* gzip flag byte */
|
|
+#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */
|
|
+#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
|
|
+#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
|
|
+#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
|
|
+#define COMMENT 0x10 /* bit 4 set: file comment present */
|
|
+#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
|
|
+#define RESERVED 0xC0 /* bit 6,7: reserved */
|
|
+
|
|
+#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
|
|
+
|
|
+/* Diagnostic functions */
|
|
+#ifdef DEBUG
|
|
+# define Assert(cond,msg) {if(!(cond)) error(msg);}
|
|
+# define Trace(x) fprintf x
|
|
+# define Tracev(x) {if (verbose) fprintf x ;}
|
|
+# define Tracevv(x) {if (verbose>1) fprintf x ;}
|
|
+# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
|
|
+# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
|
|
+#else
|
|
+# define Assert(cond,msg)
|
|
+# define Trace(x)
|
|
+# define Tracev(x)
|
|
+# define Tracevv(x)
|
|
+# define Tracec(c,x)
|
|
+# define Tracecv(c,x)
|
|
+#endif
|
|
+
|
|
+static int fill_inbuf(void);
|
|
+static void flush_window(void);
|
|
+static void error(char *m);
|
|
+static void gzip_mark(void **);
|
|
+static void gzip_release(void **);
|
|
+
|
|
+void* memset(void* s, int c, size_t n);
|
|
+void* memcpy(void* __dest, __const void* __src, size_t __n);
|
|
+
|
|
+extern void flushcaches(void); /* defined in head.S */
|
|
+
|
|
+char *input_data;
|
|
+int input_len;
|
|
+
|
|
+static long bytes_out = 0;
|
|
+static uch *output_data;
|
|
+static unsigned long output_ptr = 0;
|
|
+
|
|
+
|
|
+static void *malloc(int size);
|
|
+static void free(void *where);
|
|
+static void error(char *m);
|
|
+static void gzip_mark(void **);
|
|
+static void gzip_release(void **);
|
|
+
|
|
+static void puts(const char *str)
|
|
+{
|
|
+}
|
|
+
|
|
+extern unsigned char _end[];
|
|
+static unsigned long free_mem_ptr;
|
|
+static unsigned long free_mem_end_ptr;
|
|
+
|
|
+#define HEAP_SIZE 0x10000
|
|
+
|
|
+#include "../../../../lib/inflate.c"
|
|
+
|
|
+static void *malloc(int size)
|
|
+{
|
|
+ void *p;
|
|
+
|
|
+ if (size <0) error("Malloc error\n");
|
|
+ if (free_mem_ptr == 0) error("Memory error\n");
|
|
+
|
|
+ free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
|
|
+
|
|
+ p = (void *)free_mem_ptr;
|
|
+ free_mem_ptr += size;
|
|
+
|
|
+ if (free_mem_ptr >= free_mem_end_ptr)
|
|
+ error("\nOut of memory\n");
|
|
+
|
|
+ return p;
|
|
+}
|
|
+
|
|
+static void free(void *where)
|
|
+{ /* Don't care */
|
|
+}
|
|
+
|
|
+static void gzip_mark(void **ptr)
|
|
+{
|
|
+ *ptr = (void *) free_mem_ptr;
|
|
+}
|
|
+
|
|
+static void gzip_release(void **ptr)
|
|
+{
|
|
+ free_mem_ptr = (long) *ptr;
|
|
+}
|
|
+
|
|
+void* memset(void* s, int c, size_t n)
|
|
+{
|
|
+ int i;
|
|
+ char *ss = (char*)s;
|
|
+
|
|
+ for (i=0;i<n;i++) ss[i] = c;
|
|
+ return s;
|
|
+}
|
|
+
|
|
+void* memcpy(void* __dest, __const void* __src, size_t __n)
|
|
+{
|
|
+ int i = 0;
|
|
+ unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src;
|
|
+
|
|
+ for (i = __n >> 3; i > 0; i--) {
|
|
+ *d++ = *s++;
|
|
+ *d++ = *s++;
|
|
+ *d++ = *s++;
|
|
+ *d++ = *s++;
|
|
+ *d++ = *s++;
|
|
+ *d++ = *s++;
|
|
+ *d++ = *s++;
|
|
+ *d++ = *s++;
|
|
+ }
|
|
+
|
|
+ if (__n & 1 << 2) {
|
|
+ *d++ = *s++;
|
|
+ *d++ = *s++;
|
|
+ *d++ = *s++;
|
|
+ *d++ = *s++;
|
|
+ }
|
|
+
|
|
+ if (__n & 1 << 1) {
|
|
+ *d++ = *s++;
|
|
+ *d++ = *s++;
|
|
+ }
|
|
+
|
|
+ if (__n & 1)
|
|
+ *d++ = *s++;
|
|
+
|
|
+ return __dest;
|
|
+}
|
|
+
|
|
+/* ===========================================================================
|
|
+ * Fill the input buffer. This is called only when the buffer is empty
|
|
+ * and at least one byte is really needed.
|
|
+ */
|
|
+static int fill_inbuf(void)
|
|
+{
|
|
+ if (insize != 0) {
|
|
+ error("ran out of input data\n");
|
|
+ }
|
|
+
|
|
+ inbuf = input_data;
|
|
+ insize = input_len;
|
|
+ inptr = 1;
|
|
+ return inbuf[0];
|
|
+}
|
|
+
|
|
+/* ===========================================================================
|
|
+ * Write the output window window[0..outcnt-1] and update crc and bytes_out.
|
|
+ * (Used for the decompressed data only.)
|
|
+ */
|
|
+static void flush_window(void)
|
|
+{
|
|
+ ulg c = crc; /* temporary variable */
|
|
+ unsigned n;
|
|
+ uch *in, *out, ch;
|
|
+
|
|
+ in = window;
|
|
+ out = &output_data[output_ptr];
|
|
+ for (n = 0; n < outcnt; n++) {
|
|
+ ch = *out++ = *in++;
|
|
+ c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
|
|
+ }
|
|
+ crc = c;
|
|
+ bytes_out += (ulg)outcnt;
|
|
+ output_ptr += (ulg)outcnt;
|
|
+ outcnt = 0;
|
|
+}
|
|
+
|
|
+static void error(char *x)
|
|
+{
|
|
+ puts("\n\n");
|
|
+ puts(x);
|
|
+ puts("\n\n -- System halted");
|
|
+
|
|
+ while(1); /* Halt */
|
|
+}
|
|
+
|
|
+void decompress_kernel(unsigned int imageaddr, unsigned int imagesize, unsigned int loadaddr)
|
|
+{
|
|
+ input_data = (char *)imageaddr;
|
|
+ input_len = imagesize;
|
|
+ output_ptr = 0;
|
|
+ output_data = (uch *)loadaddr;
|
|
+ free_mem_ptr = (unsigned long)_end;
|
|
+ free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
|
|
+
|
|
+ makecrc();
|
|
+ puts("Uncompressing Linux...");
|
|
+ gunzip();
|
|
+ flushcaches();
|
|
+ puts("Ok, booting the kernel.");
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/boot/tools/entry 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/boot/tools/entry 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,12 @@
|
|
+#!/bin/sh
|
|
+
|
|
+# grab the kernel_entry address from the vmlinux elf image
|
|
+entry=`$1 $2 | grep kernel_entry`
|
|
+
|
|
+fs=`echo $entry | grep ffffffff` # check toolchain output
|
|
+
|
|
+if [ -n "$fs" ]; then
|
|
+ echo "0x"`$1 $2 | grep kernel_entry | cut -c9- | awk '{print $1}'`
|
|
+else
|
|
+ echo "0x"`$1 $2 | grep kernel_entry | cut -c1- | awk '{print $1}'`
|
|
+fi
|
|
--- linux-2.6.24.7.old/arch/mips/boot/tools/filesize 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/boot/tools/filesize 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,7 @@
|
|
+#!/bin/sh
|
|
+HOSTNAME=`uname`
|
|
+if [ "$HOSTNAME" = "Linux" ]; then
|
|
+echo `ls -l $1 | awk '{print $5}'`
|
|
+else
|
|
+echo `ls -l $1 | awk '{print $6}'`
|
|
+fi
|
|
--- linux-2.6.24.7.old/arch/mips/configs/apus_defconfig 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/configs/apus_defconfig 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,1205 @@
|
|
+#
|
|
+# Automatically generated make config: don't edit
|
|
+# Linux kernel version: 2.6.24.3
|
|
+# Fri Dec 12 17:16:48 2008
|
|
+#
|
|
+CONFIG_MIPS=y
|
|
+
|
|
+#
|
|
+# Machine selection
|
|
+#
|
|
+# CONFIG_JZ4730_PMP is not set
|
|
+# CONFIG_JZ4740_PAVO is not set
|
|
+# CONFIG_JZ4740_LEO is not set
|
|
+# CONFIG_JZ4740_LYRA is not set
|
|
+# CONFIG_JZ4725_DIPPER is not set
|
|
+# CONFIG_JZ4720_VIRGO is not set
|
|
+# CONFIG_JZ4750_FUWA is not set
|
|
+CONFIG_JZ4750_APUS=y
|
|
+# CONFIG_MACH_ALCHEMY is not set
|
|
+# CONFIG_BASLER_EXCITE is not set
|
|
+# CONFIG_BCM47XX is not set
|
|
+# CONFIG_MIPS_COBALT is not set
|
|
+# CONFIG_MACH_DECSTATION is not set
|
|
+# CONFIG_MACH_JAZZ is not set
|
|
+# CONFIG_LASAT is not set
|
|
+# CONFIG_LEMOTE_FULONG is not set
|
|
+# CONFIG_MIPS_ATLAS is not set
|
|
+# CONFIG_MIPS_MALTA is not set
|
|
+# CONFIG_MIPS_SEAD is not set
|
|
+# CONFIG_MIPS_SIM is not set
|
|
+# CONFIG_MARKEINS is not set
|
|
+# CONFIG_MACH_VR41XX is not set
|
|
+# CONFIG_PNX8550_JBS is not set
|
|
+# CONFIG_PNX8550_STB810 is not set
|
|
+# CONFIG_PMC_MSP is not set
|
|
+# CONFIG_PMC_YOSEMITE is not set
|
|
+# CONFIG_QEMU is not set
|
|
+# CONFIG_SGI_IP22 is not set
|
|
+# CONFIG_SGI_IP27 is not set
|
|
+# CONFIG_SGI_IP32 is not set
|
|
+# CONFIG_SIBYTE_CRHINE is not set
|
|
+# CONFIG_SIBYTE_CARMEL is not set
|
|
+# CONFIG_SIBYTE_CRHONE is not set
|
|
+# CONFIG_SIBYTE_RHONE is not set
|
|
+# CONFIG_SIBYTE_SWARM is not set
|
|
+# CONFIG_SIBYTE_LITTLESUR is not set
|
|
+# CONFIG_SIBYTE_SENTOSA is not set
|
|
+# CONFIG_SIBYTE_PTSWARM is not set
|
|
+# CONFIG_SIBYTE_BIGSUR is not set
|
|
+# CONFIG_SNI_RM is not set
|
|
+# CONFIG_TOSHIBA_JMR3927 is not set
|
|
+# CONFIG_TOSHIBA_RBTX4927 is not set
|
|
+# CONFIG_TOSHIBA_RBTX4938 is not set
|
|
+# CONFIG_WR_PPMC is not set
|
|
+CONFIG_SOC_JZ4750=y
|
|
+CONFIG_JZSOC=y
|
|
+CONFIG_JZRISC=y
|
|
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
|
+CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|
+CONFIG_GENERIC_HWEIGHT=y
|
|
+CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
+CONFIG_GENERIC_CLOCKEVENTS=y
|
|
+CONFIG_GENERIC_TIME=y
|
|
+CONFIG_GENERIC_CMOS_UPDATE=y
|
|
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
|
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
|
|
+CONFIG_DMA_NONCOHERENT=y
|
|
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
|
+# CONFIG_HOTPLUG_CPU is not set
|
|
+# CONFIG_NO_IOPORT is not set
|
|
+# CONFIG_CPU_BIG_ENDIAN is not set
|
|
+CONFIG_CPU_LITTLE_ENDIAN=y
|
|
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
|
+CONFIG_MIPS_L1_CACHE_SHIFT=5
|
|
+
|
|
+#
|
|
+# CPU selection
|
|
+#
|
|
+# CONFIG_CPU_LOONGSON2 is not set
|
|
+CONFIG_CPU_MIPS32_R1=y
|
|
+# CONFIG_CPU_MIPS32_R2 is not set
|
|
+# CONFIG_CPU_MIPS64_R1 is not set
|
|
+# CONFIG_CPU_MIPS64_R2 is not set
|
|
+# CONFIG_CPU_R3000 is not set
|
|
+# CONFIG_CPU_TX39XX is not set
|
|
+# CONFIG_CPU_VR41XX is not set
|
|
+# CONFIG_CPU_R4300 is not set
|
|
+# CONFIG_CPU_R4X00 is not set
|
|
+# CONFIG_CPU_TX49XX is not set
|
|
+# CONFIG_CPU_R5000 is not set
|
|
+# CONFIG_CPU_R5432 is not set
|
|
+# CONFIG_CPU_R6000 is not set
|
|
+# CONFIG_CPU_NEVADA is not set
|
|
+# CONFIG_CPU_R8000 is not set
|
|
+# CONFIG_CPU_R10000 is not set
|
|
+# CONFIG_CPU_RM7000 is not set
|
|
+# CONFIG_CPU_RM9000 is not set
|
|
+# CONFIG_CPU_SB1 is not set
|
|
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
|
+CONFIG_CPU_MIPS32=y
|
|
+CONFIG_CPU_MIPSR1=y
|
|
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
|
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
|
+
|
|
+#
|
|
+# Kernel type
|
|
+#
|
|
+CONFIG_32BIT=y
|
|
+# CONFIG_64BIT is not set
|
|
+CONFIG_PAGE_SIZE_4KB=y
|
|
+# CONFIG_PAGE_SIZE_8KB is not set
|
|
+# CONFIG_PAGE_SIZE_16KB is not set
|
|
+# CONFIG_PAGE_SIZE_64KB is not set
|
|
+CONFIG_CPU_HAS_PREFETCH=y
|
|
+CONFIG_MIPS_MT_DISABLED=y
|
|
+# CONFIG_MIPS_MT_SMP is not set
|
|
+# CONFIG_MIPS_MT_SMTC is not set
|
|
+CONFIG_CPU_HAS_LLSC=y
|
|
+CONFIG_CPU_HAS_SYNC=y
|
|
+CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_GENERIC_IRQ_PROBE=y
|
|
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
|
+CONFIG_ARCH_FLATMEM_ENABLE=y
|
|
+CONFIG_ARCH_POPULATES_NODE_MAP=y
|
|
+CONFIG_SELECT_MEMORY_MODEL=y
|
|
+CONFIG_FLATMEM_MANUAL=y
|
|
+# CONFIG_DISCONTIGMEM_MANUAL is not set
|
|
+# CONFIG_SPARSEMEM_MANUAL is not set
|
|
+CONFIG_FLATMEM=y
|
|
+CONFIG_FLAT_NODE_MEM_MAP=y
|
|
+# CONFIG_SPARSEMEM_STATIC is not set
|
|
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
|
+CONFIG_SPLIT_PTLOCK_CPUS=4
|
|
+# CONFIG_RESOURCES_64BIT is not set
|
|
+CONFIG_ZONE_DMA_FLAG=0
|
|
+CONFIG_VIRT_TO_BUS=y
|
|
+# CONFIG_TICK_ONESHOT is not set
|
|
+# CONFIG_NO_HZ is not set
|
|
+# CONFIG_HIGH_RES_TIMERS is not set
|
|
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
+CONFIG_FORCE_MAX_ZONEORDER=12
|
|
+# CONFIG_HZ_48 is not set
|
|
+CONFIG_HZ_100=y
|
|
+# CONFIG_HZ_128 is not set
|
|
+# CONFIG_HZ_250 is not set
|
|
+# CONFIG_HZ_256 is not set
|
|
+# CONFIG_HZ_1000 is not set
|
|
+# CONFIG_HZ_1024 is not set
|
|
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
|
+CONFIG_HZ=100
|
|
+# CONFIG_PREEMPT_NONE is not set
|
|
+# CONFIG_PREEMPT_VOLUNTARY is not set
|
|
+CONFIG_PREEMPT=y
|
|
+CONFIG_PREEMPT_BKL=y
|
|
+# CONFIG_KEXEC is not set
|
|
+CONFIG_SECCOMP=y
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
+
|
|
+#
|
|
+# General setup
|
|
+#
|
|
+CONFIG_EXPERIMENTAL=y
|
|
+CONFIG_BROKEN_ON_SMP=y
|
|
+CONFIG_LOCK_KERNEL=y
|
|
+CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
+CONFIG_LOCALVERSION=""
|
|
+CONFIG_LOCALVERSION_AUTO=y
|
|
+CONFIG_SWAP=y
|
|
+CONFIG_SYSVIPC=y
|
|
+CONFIG_SYSVIPC_SYSCTL=y
|
|
+# CONFIG_POSIX_MQUEUE is not set
|
|
+# CONFIG_BSD_PROCESS_ACCT is not set
|
|
+# CONFIG_TASKSTATS is not set
|
|
+# CONFIG_USER_NS is not set
|
|
+# CONFIG_PID_NS is not set
|
|
+# CONFIG_AUDIT is not set
|
|
+# CONFIG_IKCONFIG is not set
|
|
+CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_CGROUPS is not set
|
|
+CONFIG_FAIR_GROUP_SCHED=y
|
|
+CONFIG_FAIR_USER_SCHED=y
|
|
+# CONFIG_FAIR_CGROUP_SCHED is not set
|
|
+CONFIG_SYSFS_DEPRECATED=y
|
|
+CONFIG_RELAY=y
|
|
+# CONFIG_BLK_DEV_INITRD is not set
|
|
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
|
+CONFIG_SYSCTL=y
|
|
+CONFIG_EMBEDDED=y
|
|
+CONFIG_SYSCTL_SYSCALL=y
|
|
+CONFIG_KALLSYMS=y
|
|
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
|
+CONFIG_HOTPLUG=y
|
|
+CONFIG_PRINTK=y
|
|
+CONFIG_BUG=y
|
|
+CONFIG_ELF_CORE=y
|
|
+CONFIG_BASE_FULL=y
|
|
+CONFIG_FUTEX=y
|
|
+CONFIG_ANON_INODES=y
|
|
+CONFIG_EPOLL=y
|
|
+CONFIG_SIGNALFD=y
|
|
+CONFIG_EVENTFD=y
|
|
+CONFIG_SHMEM=y
|
|
+CONFIG_VM_EVENT_COUNTERS=y
|
|
+CONFIG_SLAB=y
|
|
+# CONFIG_SLUB is not set
|
|
+# CONFIG_SLOB is not set
|
|
+CONFIG_SLABINFO=y
|
|
+CONFIG_RT_MUTEXES=y
|
|
+# CONFIG_TINY_SHMEM is not set
|
|
+CONFIG_BASE_SMALL=0
|
|
+CONFIG_MODULES=y
|
|
+CONFIG_MODULE_UNLOAD=y
|
|
+# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
+CONFIG_MODVERSIONS=y
|
|
+CONFIG_MODULE_SRCVERSION_ALL=y
|
|
+CONFIG_KMOD=y
|
|
+CONFIG_BLOCK=y
|
|
+# CONFIG_LBD is not set
|
|
+# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
+# CONFIG_LSF is not set
|
|
+# CONFIG_BLK_DEV_BSG is not set
|
|
+
|
|
+#
|
|
+# IO Schedulers
|
|
+#
|
|
+CONFIG_IOSCHED_NOOP=y
|
|
+CONFIG_IOSCHED_AS=y
|
|
+CONFIG_IOSCHED_DEADLINE=y
|
|
+CONFIG_IOSCHED_CFQ=y
|
|
+CONFIG_DEFAULT_AS=y
|
|
+# CONFIG_DEFAULT_DEADLINE is not set
|
|
+# CONFIG_DEFAULT_CFQ is not set
|
|
+# CONFIG_DEFAULT_NOOP is not set
|
|
+CONFIG_DEFAULT_IOSCHED="anticipatory"
|
|
+
|
|
+#
|
|
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
|
|
+#
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
+CONFIG_MMU=y
|
|
+# CONFIG_PCCARD is not set
|
|
+
|
|
+#
|
|
+# Executable file formats
|
|
+#
|
|
+CONFIG_BINFMT_ELF=y
|
|
+# CONFIG_BINFMT_MISC is not set
|
|
+CONFIG_TRAD_SIGNALS=y
|
|
+
|
|
+#
|
|
+# CPU Frequency scaling
|
|
+#
|
|
+CONFIG_CPU_FREQ_JZ=y
|
|
+CONFIG_CPU_FREQ=y
|
|
+CONFIG_CPU_FREQ_TABLE=y
|
|
+# CONFIG_CPU_FREQ_DEBUG is not set
|
|
+CONFIG_CPU_FREQ_STAT=y
|
|
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
|
|
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
|
|
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
|
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
|
|
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
|
|
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
|
|
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
|
|
+
|
|
+#
|
|
+# Power management options
|
|
+#
|
|
+CONFIG_PM=y
|
|
+CONFIG_PM_LEGACY=y
|
|
+# CONFIG_PM_DEBUG is not set
|
|
+CONFIG_SUSPEND_UP_POSSIBLE=y
|
|
+# CONFIG_SUSPEND is not set
|
|
+
|
|
+#
|
|
+# Networking
|
|
+#
|
|
+CONFIG_NET=y
|
|
+
|
|
+#
|
|
+# Networking options
|
|
+#
|
|
+CONFIG_PACKET=y
|
|
+# CONFIG_PACKET_MMAP is not set
|
|
+CONFIG_UNIX=y
|
|
+# CONFIG_NET_KEY is not set
|
|
+CONFIG_INET=y
|
|
+# CONFIG_IP_MULTICAST is not set
|
|
+# CONFIG_IP_ADVANCED_ROUTER is not set
|
|
+CONFIG_IP_FIB_HASH=y
|
|
+CONFIG_IP_PNP=y
|
|
+CONFIG_IP_PNP_DHCP=y
|
|
+CONFIG_IP_PNP_BOOTP=y
|
|
+# CONFIG_IP_PNP_RARP is not set
|
|
+# CONFIG_NET_IPIP is not set
|
|
+# CONFIG_NET_IPGRE is not set
|
|
+# CONFIG_ARPD is not set
|
|
+# CONFIG_SYN_COOKIES is not set
|
|
+# CONFIG_INET_AH is not set
|
|
+# CONFIG_INET_ESP is not set
|
|
+# CONFIG_INET_IPCOMP is not set
|
|
+# CONFIG_INET_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
|
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_BEET is not set
|
|
+# CONFIG_INET_LRO is not set
|
|
+CONFIG_INET_DIAG=m
|
|
+CONFIG_INET_TCP_DIAG=m
|
|
+# CONFIG_TCP_CONG_ADVANCED is not set
|
|
+CONFIG_TCP_CONG_CUBIC=y
|
|
+CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
+# CONFIG_TCP_MD5SIG is not set
|
|
+# CONFIG_IPV6 is not set
|
|
+# CONFIG_INET6_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET6_TUNNEL is not set
|
|
+# CONFIG_NETWORK_SECMARK is not set
|
|
+# CONFIG_NETFILTER is not set
|
|
+# CONFIG_IP_DCCP is not set
|
|
+# CONFIG_IP_SCTP is not set
|
|
+# CONFIG_TIPC is not set
|
|
+# CONFIG_ATM is not set
|
|
+# CONFIG_BRIDGE is not set
|
|
+# CONFIG_VLAN_8021Q is not set
|
|
+# CONFIG_DECNET is not set
|
|
+# CONFIG_LLC2 is not set
|
|
+# CONFIG_IPX is not set
|
|
+# CONFIG_ATALK is not set
|
|
+# CONFIG_X25 is not set
|
|
+# CONFIG_LAPB is not set
|
|
+# CONFIG_ECONET is not set
|
|
+# CONFIG_WAN_ROUTER is not set
|
|
+# CONFIG_NET_SCHED is not set
|
|
+
|
|
+#
|
|
+# Network testing
|
|
+#
|
|
+# CONFIG_NET_PKTGEN is not set
|
|
+# CONFIG_HAMRADIO is not set
|
|
+# CONFIG_IRDA is not set
|
|
+# CONFIG_BT is not set
|
|
+# CONFIG_AF_RXRPC is not set
|
|
+
|
|
+#
|
|
+# Wireless
|
|
+#
|
|
+# CONFIG_CFG80211 is not set
|
|
+CONFIG_WIRELESS_EXT=y
|
|
+# CONFIG_MAC80211 is not set
|
|
+# CONFIG_IEEE80211 is not set
|
|
+# CONFIG_RFKILL is not set
|
|
+# CONFIG_NET_9P is not set
|
|
+
|
|
+#
|
|
+# Device Drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# Generic Driver Options
|
|
+#
|
|
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
+CONFIG_STANDALONE=y
|
|
+CONFIG_PREVENT_FIRMWARE_BUILD=y
|
|
+# CONFIG_FW_LOADER is not set
|
|
+# CONFIG_SYS_HYPERVISOR is not set
|
|
+# CONFIG_CONNECTOR is not set
|
|
+CONFIG_MTD=y
|
|
+# CONFIG_MTD_DEBUG is not set
|
|
+# CONFIG_MTD_CONCAT is not set
|
|
+CONFIG_MTD_PARTITIONS=y
|
|
+# CONFIG_MTD_REDBOOT_PARTS is not set
|
|
+# CONFIG_MTD_CMDLINE_PARTS is not set
|
|
+
|
|
+#
|
|
+# User Modules And Translation Layers
|
|
+#
|
|
+CONFIG_MTD_CHAR=y
|
|
+CONFIG_MTD_BLKDEVS=y
|
|
+CONFIG_MTD_BLOCK=y
|
|
+# CONFIG_FTL is not set
|
|
+# CONFIG_NFTL is not set
|
|
+# CONFIG_INFTL is not set
|
|
+# CONFIG_RFD_FTL is not set
|
|
+# CONFIG_SSFDC is not set
|
|
+# CONFIG_MTD_OOPS is not set
|
|
+
|
|
+#
|
|
+# RAM/ROM/Flash chip drivers
|
|
+#
|
|
+# CONFIG_MTD_CFI is not set
|
|
+# CONFIG_MTD_JEDECPROBE is not set
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
|
+CONFIG_MTD_CFI_I1=y
|
|
+CONFIG_MTD_CFI_I2=y
|
|
+# CONFIG_MTD_CFI_I4 is not set
|
|
+# CONFIG_MTD_CFI_I8 is not set
|
|
+# CONFIG_MTD_RAM is not set
|
|
+# CONFIG_MTD_ROM is not set
|
|
+# CONFIG_MTD_ABSENT is not set
|
|
+
|
|
+#
|
|
+# Mapping drivers for chip access
|
|
+#
|
|
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
|
+# CONFIG_MTD_PLATRAM is not set
|
|
+
|
|
+#
|
|
+# Self-contained MTD device drivers
|
|
+#
|
|
+# CONFIG_MTD_SLRAM is not set
|
|
+# CONFIG_MTD_PHRAM is not set
|
|
+# CONFIG_MTD_MTDRAM is not set
|
|
+# CONFIG_MTD_BLOCK2MTD is not set
|
|
+
|
|
+#
|
|
+# Disk-On-Chip Device Drivers
|
|
+#
|
|
+# CONFIG_MTD_DOC2000 is not set
|
|
+# CONFIG_MTD_DOC2001 is not set
|
|
+# CONFIG_MTD_DOC2001PLUS is not set
|
|
+CONFIG_MTD_NAND=y
|
|
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
|
|
+# CONFIG_MTD_NAND_ECC_SMC is not set
|
|
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
|
|
+CONFIG_MTD_NAND_IDS=y
|
|
+# CONFIG_MTD_NAND_DISKONCHIP is not set
|
|
+# CONFIG_MTD_NAND_NANDSIM is not set
|
|
+# CONFIG_MTD_NAND_PLATFORM is not set
|
|
+# CONFIG_MTD_ALAUDA is not set
|
|
+CONFIG_MTD_NAND_JZ4750=y
|
|
+# CONFIG_MTD_NAND_CS2 is not set
|
|
+# CONFIG_MTD_NAND_CS3 is not set
|
|
+# CONFIG_MTD_NAND_CS4 is not set
|
|
+CONFIG_MTD_NAND_MULTI_PLANE=y
|
|
+# CONFIG_MTD_HW_HM_ECC is not set
|
|
+# CONFIG_MTD_SW_HM_ECC is not set
|
|
+# CONFIG_MTD_HW_RS_ECC is not set
|
|
+CONFIG_MTD_HW_BCH_ECC=y
|
|
+CONFIG_MTD_HW_BCH_4BIT=y
|
|
+# CONFIG_MTD_HW_BCH_8BIT is not set
|
|
+CONFIG_MTD_NAND_DMA=y
|
|
+# CONFIG_MTD_NAND_DMABUF is not set
|
|
+# CONFIG_MTD_MTDBLOCK_WRITE_VERIFY_ENABLE is not set
|
|
+CONFIG_MTD_OOB_COPIES=3
|
|
+CONFIG_MTD_BADBLOCK_FLAG_PAGE=127
|
|
+# CONFIG_MTD_ONENAND is not set
|
|
+
|
|
+#
|
|
+# UBI - Unsorted block images
|
|
+#
|
|
+# CONFIG_MTD_UBI is not set
|
|
+# CONFIG_MTD_UBI_BLKDEVS is not set
|
|
+# CONFIG_PARPORT is not set
|
|
+# CONFIG_PNP is not set
|
|
+CONFIG_BLK_DEV=y
|
|
+# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
+CONFIG_BLK_DEV_LOOP=y
|
|
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
|
+# CONFIG_BLK_DEV_NBD is not set
|
|
+# CONFIG_BLK_DEV_UB is not set
|
|
+CONFIG_BLK_DEV_RAM=y
|
|
+CONFIG_BLK_DEV_RAM_COUNT=16
|
|
+CONFIG_BLK_DEV_RAM_SIZE=4096
|
|
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
+# CONFIG_CDROM_PKTCDVD is not set
|
|
+# CONFIG_ATA_OVER_ETH is not set
|
|
+CONFIG_MISC_DEVICES=y
|
|
+# CONFIG_EEPROM_93CX6 is not set
|
|
+# CONFIG_IDE is not set
|
|
+
|
|
+#
|
|
+# SCSI device support
|
|
+#
|
|
+# CONFIG_RAID_ATTRS is not set
|
|
+CONFIG_SCSI=y
|
|
+CONFIG_SCSI_DMA=y
|
|
+# CONFIG_SCSI_TGT is not set
|
|
+# CONFIG_SCSI_NETLINK is not set
|
|
+CONFIG_SCSI_PROC_FS=y
|
|
+
|
|
+#
|
|
+# SCSI support type (disk, tape, CD-ROM)
|
|
+#
|
|
+CONFIG_BLK_DEV_SD=y
|
|
+# CONFIG_CHR_DEV_ST is not set
|
|
+# CONFIG_CHR_DEV_OSST is not set
|
|
+# CONFIG_BLK_DEV_SR is not set
|
|
+# CONFIG_CHR_DEV_SG is not set
|
|
+# CONFIG_CHR_DEV_SCH is not set
|
|
+
|
|
+#
|
|
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
|
+#
|
|
+# CONFIG_SCSI_MULTI_LUN is not set
|
|
+# CONFIG_SCSI_CONSTANTS is not set
|
|
+# CONFIG_SCSI_LOGGING is not set
|
|
+# CONFIG_SCSI_SCAN_ASYNC is not set
|
|
+CONFIG_SCSI_WAIT_SCAN=m
|
|
+
|
|
+#
|
|
+# SCSI Transports
|
|
+#
|
|
+# CONFIG_SCSI_SPI_ATTRS is not set
|
|
+# CONFIG_SCSI_FC_ATTRS is not set
|
|
+# CONFIG_SCSI_ISCSI_ATTRS is not set
|
|
+# CONFIG_SCSI_SAS_LIBSAS is not set
|
|
+# CONFIG_SCSI_SRP_ATTRS is not set
|
|
+CONFIG_SCSI_LOWLEVEL=y
|
|
+# CONFIG_ISCSI_TCP is not set
|
|
+# CONFIG_SCSI_DEBUG is not set
|
|
+# CONFIG_ATA is not set
|
|
+# CONFIG_MD is not set
|
|
+CONFIG_NETDEVICES=y
|
|
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
|
+# CONFIG_DUMMY is not set
|
|
+# CONFIG_BONDING is not set
|
|
+# CONFIG_MACVLAN is not set
|
|
+# CONFIG_EQUALIZER is not set
|
|
+# CONFIG_TUN is not set
|
|
+# CONFIG_VETH is not set
|
|
+CONFIG_PHYLIB=y
|
|
+
|
|
+#
|
|
+# MII PHY device drivers
|
|
+#
|
|
+# CONFIG_MARVELL_PHY is not set
|
|
+# CONFIG_DAVICOM_PHY is not set
|
|
+# CONFIG_QSEMI_PHY is not set
|
|
+# CONFIG_LXT_PHY is not set
|
|
+# CONFIG_CICADA_PHY is not set
|
|
+# CONFIG_VITESSE_PHY is not set
|
|
+# CONFIG_SMSC_PHY is not set
|
|
+# CONFIG_BROADCOM_PHY is not set
|
|
+# CONFIG_ICPLUS_PHY is not set
|
|
+# CONFIG_FIXED_PHY is not set
|
|
+# CONFIG_MDIO_BITBANG is not set
|
|
+CONFIG_NET_ETHERNET=y
|
|
+CONFIG_MII=y
|
|
+CONFIG_JZCS8900=y
|
|
+# CONFIG_AX88796 is not set
|
|
+# CONFIG_DM9000 is not set
|
|
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_TAH is not set
|
|
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
|
+# CONFIG_B44 is not set
|
|
+# CONFIG_NETDEV_1000 is not set
|
|
+# CONFIG_NETDEV_10000 is not set
|
|
+
|
|
+#
|
|
+# Wireless LAN
|
|
+#
|
|
+# CONFIG_WLAN_PRE80211 is not set
|
|
+# CONFIG_WLAN_80211 is not set
|
|
+
|
|
+#
|
|
+# USB Network Adapters
|
|
+#
|
|
+# CONFIG_USB_CATC is not set
|
|
+# CONFIG_USB_KAWETH is not set
|
|
+# CONFIG_USB_PEGASUS is not set
|
|
+# CONFIG_USB_RTL8150 is not set
|
|
+# CONFIG_USB_USBNET is not set
|
|
+# CONFIG_WAN is not set
|
|
+# CONFIG_PPP is not set
|
|
+# CONFIG_SLIP is not set
|
|
+# CONFIG_SHAPER is not set
|
|
+# CONFIG_NETCONSOLE is not set
|
|
+# CONFIG_NETPOLL is not set
|
|
+# CONFIG_NET_POLL_CONTROLLER is not set
|
|
+# CONFIG_ISDN is not set
|
|
+# CONFIG_PHONE is not set
|
|
+
|
|
+#
|
|
+# Input device support
|
|
+#
|
|
+CONFIG_INPUT=y
|
|
+# CONFIG_INPUT_FF_MEMLESS is not set
|
|
+# CONFIG_INPUT_POLLDEV is not set
|
|
+
|
|
+#
|
|
+# Userland interfaces
|
|
+#
|
|
+CONFIG_INPUT_MOUSEDEV=y
|
|
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
|
+# CONFIG_INPUT_JOYDEV is not set
|
|
+# CONFIG_INPUT_EVDEV is not set
|
|
+# CONFIG_INPUT_EVBUG is not set
|
|
+
|
|
+#
|
|
+# Input Device Drivers
|
|
+#
|
|
+CONFIG_INPUT_KEYBOARD=y
|
|
+CONFIG_KEYBOARD_ATKBD=y
|
|
+# CONFIG_KEYBOARD_SUNKBD is not set
|
|
+# CONFIG_KEYBOARD_LKKBD is not set
|
|
+# CONFIG_KEYBOARD_XTKBD is not set
|
|
+# CONFIG_KEYBOARD_NEWTON is not set
|
|
+# CONFIG_KEYBOARD_STOWAWAY is not set
|
|
+# CONFIG_KEYBOARD_JZ is not set
|
|
+# CONFIG_KEYBOARD_GPIO is not set
|
|
+# CONFIG_INPUT_MOUSE is not set
|
|
+# CONFIG_INPUT_JOYSTICK is not set
|
|
+# CONFIG_INPUT_TABLET is not set
|
|
+# CONFIG_INPUT_TOUCHSCREEN is not set
|
|
+# CONFIG_INPUT_MISC is not set
|
|
+
|
|
+#
|
|
+# Hardware I/O ports
|
|
+#
|
|
+CONFIG_SERIO=y
|
|
+# CONFIG_SERIO_I8042 is not set
|
|
+CONFIG_SERIO_SERPORT=y
|
|
+CONFIG_SERIO_LIBPS2=y
|
|
+# CONFIG_SERIO_RAW is not set
|
|
+# CONFIG_GAMEPORT is not set
|
|
+
|
|
+#
|
|
+# Character devices
|
|
+#
|
|
+CONFIG_VT=y
|
|
+CONFIG_VT_CONSOLE=y
|
|
+CONFIG_HW_CONSOLE=y
|
|
+CONFIG_VT_HW_CONSOLE_BINDING=y
|
|
+# CONFIG_SERIAL_NONSTANDARD is not set
|
|
+
|
|
+#
|
|
+# Serial drivers
|
|
+#
|
|
+CONFIG_SERIAL_8250=y
|
|
+CONFIG_SERIAL_8250_CONSOLE=y
|
|
+CONFIG_SERIAL_8250_NR_UARTS=4
|
|
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
|
|
+# CONFIG_SERIAL_8250_EXTENDED is not set
|
|
+
|
|
+#
|
|
+# Non-8250 serial port support
|
|
+#
|
|
+CONFIG_SERIAL_CORE=y
|
|
+CONFIG_SERIAL_CORE_CONSOLE=y
|
|
+CONFIG_UNIX98_PTYS=y
|
|
+CONFIG_LEGACY_PTYS=y
|
|
+CONFIG_LEGACY_PTY_COUNT=2
|
|
+# CONFIG_IPMI_HANDLER is not set
|
|
+# CONFIG_HW_RANDOM is not set
|
|
+# CONFIG_RTC is not set
|
|
+# CONFIG_RTC_PCF8563 is not set
|
|
+# CONFIG_RTC_JZ is not set
|
|
+# CONFIG_R3964 is not set
|
|
+# CONFIG_RAW_DRIVER is not set
|
|
+# CONFIG_TCG_TPM is not set
|
|
+
|
|
+#
|
|
+# JZSOC char device support
|
|
+#
|
|
+CONFIG_JZCHAR=y
|
|
+# CONFIG_JZ_CIM is not set
|
|
+# CONFIG_JZ_TPANEL_ATA2508 is not set
|
|
+CONFIG_JZ_TPANEL=y
|
|
+CONFIG_JZ_SADC=y
|
|
+# CONFIG_JZ_TPANEL_AK4182 is not set
|
|
+# CONFIG_JZ_TPANEL_UCB1400 is not set
|
|
+# CONFIG_JZ_TPANEL_WM9712 is not set
|
|
+# CONFIG_JZ_UDC_HOTPLUG is not set
|
|
+CONFIG_JZ_POWEROFF=y
|
|
+# CONFIG_JZ_OW is not set
|
|
+CONFIG_JZ_TCSM=y
|
|
+# CONFIG_I2C is not set
|
|
+
|
|
+#
|
|
+# SPI support
|
|
+#
|
|
+# CONFIG_SPI is not set
|
|
+# CONFIG_SPI_MASTER is not set
|
|
+# CONFIG_W1 is not set
|
|
+# CONFIG_POWER_SUPPLY is not set
|
|
+# CONFIG_HWMON is not set
|
|
+# CONFIG_WATCHDOG is not set
|
|
+
|
|
+#
|
|
+# Sonics Silicon Backplane
|
|
+#
|
|
+CONFIG_SSB_POSSIBLE=y
|
|
+# CONFIG_SSB is not set
|
|
+
|
|
+#
|
|
+# Multifunction device drivers
|
|
+#
|
|
+# CONFIG_MFD_SM501 is not set
|
|
+
|
|
+#
|
|
+# Multimedia devices
|
|
+#
|
|
+# CONFIG_VIDEO_DEV is not set
|
|
+# CONFIG_DVB_CORE is not set
|
|
+# CONFIG_DAB is not set
|
|
+
|
|
+#
|
|
+# Graphics support
|
|
+#
|
|
+# CONFIG_VGASTATE is not set
|
|
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
|
+CONFIG_FB=y
|
|
+# CONFIG_FIRMWARE_EDID is not set
|
|
+# CONFIG_FB_DDC is not set
|
|
+CONFIG_FB_CFB_FILLRECT=y
|
|
+CONFIG_FB_CFB_COPYAREA=y
|
|
+CONFIG_FB_CFB_IMAGEBLIT=y
|
|
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
|
|
+# CONFIG_FB_SYS_FILLRECT is not set
|
|
+# CONFIG_FB_SYS_COPYAREA is not set
|
|
+# CONFIG_FB_SYS_IMAGEBLIT is not set
|
|
+# CONFIG_FB_SYS_FOPS is not set
|
|
+CONFIG_FB_DEFERRED_IO=y
|
|
+# CONFIG_FB_SVGALIB is not set
|
|
+# CONFIG_FB_MACMODES is not set
|
|
+# CONFIG_FB_BACKLIGHT is not set
|
|
+# CONFIG_FB_MODE_HELPERS is not set
|
|
+# CONFIG_FB_TILEBLITTING is not set
|
|
+
|
|
+#
|
|
+# Frame buffer hardware drivers
|
|
+#
|
|
+CONFIG_FB_JZSOC=y
|
|
+CONFIG_FB_JZ4750_TVE=y
|
|
+# CONFIG_IPU_JZ4750 is not set
|
|
+CONFIG_FB_JZ4750_LCD=y
|
|
+# CONFIG_FB_JZ4750_LCD_USE_2LAYER_FRAMEBUFFER is not set
|
|
+# CONFIG_FB_JZ4750_SLCD is not set
|
|
+# CONFIG_JZ4750_LCD_SAMSUNG_LTP400WQF01 is not set
|
|
+# CONFIG_JZ4750_LCD_SAMSUNG_LTP400WQF02 is not set
|
|
+CONFIG_JZ4750_LCD_AUO_A043FL01V2=y
|
|
+# CONFIG_JZ4750_LCD_FOXCONN_PT035TN01 is not set
|
|
+# CONFIG_JZ4750_LCD_INNOLUX_PT035TN01_SERIAL is not set
|
|
+# CONFIG_JZ4750_LCD_TOPPOLY_TD025THEA7_RGB_DELTA is not set
|
|
+# CONFIG_JZ4750_LCD_TRULY_TFTG320240DTSW_18BIT is not set
|
|
+# CONFIG_JZ4750_LCD_TRULY_TFT_GG1P0319LTSW_W is not set
|
|
+# CONFIG_JZ4750_SLCD_KGM701A3_TFT_SPFD5420A is not set
|
|
+# CONFIG_FB_S1D13XXX is not set
|
|
+# CONFIG_FB_VIRTUAL is not set
|
|
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Display device support
|
|
+#
|
|
+# CONFIG_DISPLAY_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Console display driver support
|
|
+#
|
|
+# CONFIG_VGA_CONSOLE is not set
|
|
+CONFIG_DUMMY_CONSOLE=y
|
|
+CONFIG_FRAMEBUFFER_CONSOLE=y
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE_CURSOR_FLASH is not set
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
|
|
+CONFIG_FONTS=y
|
|
+CONFIG_FONT_8x8=y
|
|
+CONFIG_FONT_8x16=y
|
|
+# CONFIG_FONT_6x11 is not set
|
|
+# CONFIG_FONT_7x14 is not set
|
|
+# CONFIG_FONT_PEARL_8x8 is not set
|
|
+# CONFIG_FONT_ACORN_8x8 is not set
|
|
+# CONFIG_FONT_MINI_4x6 is not set
|
|
+# CONFIG_FONT_SUN8x16 is not set
|
|
+# CONFIG_FONT_SUN12x22 is not set
|
|
+# CONFIG_FONT_10x18 is not set
|
|
+CONFIG_LOGO=y
|
|
+CONFIG_LOGO_LINUX_MONO=y
|
|
+CONFIG_LOGO_LINUX_VGA16=y
|
|
+CONFIG_LOGO_LINUX_CLUT224=y
|
|
+
|
|
+#
|
|
+# Sound
|
|
+#
|
|
+CONFIG_SOUND=y
|
|
+
|
|
+#
|
|
+# Advanced Linux Sound Architecture
|
|
+#
|
|
+# CONFIG_SND is not set
|
|
+
|
|
+#
|
|
+# Open Sound System
|
|
+#
|
|
+CONFIG_SOUND_PRIME=y
|
|
+CONFIG_OSS_OBSOLETE=y
|
|
+# CONFIG_SOUND_JZ_AC97 is not set
|
|
+CONFIG_SOUND_JZ_I2S=y
|
|
+# CONFIG_SOUND_JZ_PCM is not set
|
|
+# CONFIG_I2S_AK4642EN is not set
|
|
+# CONFIG_I2S_ICODEC is not set
|
|
+CONFIG_I2S_DLV=y
|
|
+# CONFIG_SOUND_MSNDCLAS is not set
|
|
+# CONFIG_SOUND_MSNDPIN is not set
|
|
+CONFIG_HID_SUPPORT=y
|
|
+CONFIG_HID=y
|
|
+# CONFIG_HID_DEBUG is not set
|
|
+# CONFIG_HIDRAW is not set
|
|
+
|
|
+#
|
|
+# USB Input Devices
|
|
+#
|
|
+CONFIG_USB_HID=y
|
|
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
|
|
+# CONFIG_HID_FF is not set
|
|
+CONFIG_USB_HIDDEV=y
|
|
+CONFIG_USB_SUPPORT=y
|
|
+CONFIG_USB_ARCH_HAS_HCD=y
|
|
+CONFIG_USB_ARCH_HAS_OHCI=y
|
|
+# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
+CONFIG_USB=y
|
|
+# CONFIG_USB_DEBUG is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous USB options
|
|
+#
|
|
+# CONFIG_USB_DEVICEFS is not set
|
|
+CONFIG_USB_DEVICE_CLASS=y
|
|
+# CONFIG_USB_DYNAMIC_MINORS is not set
|
|
+# CONFIG_USB_SUSPEND is not set
|
|
+# CONFIG_USB_PERSIST is not set
|
|
+# CONFIG_USB_OTG is not set
|
|
+
|
|
+#
|
|
+# USB Host Controller Drivers
|
|
+#
|
|
+# CONFIG_USB_ISP116X_HCD is not set
|
|
+CONFIG_USB_OHCI_HCD=y
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
|
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
|
+# CONFIG_USB_SL811_HCD is not set
|
|
+# CONFIG_USB_R8A66597_HCD is not set
|
|
+
|
|
+#
|
|
+# USB Device Class drivers
|
|
+#
|
|
+# CONFIG_USB_ACM is not set
|
|
+# CONFIG_USB_PRINTER is not set
|
|
+
|
|
+#
|
|
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
+#
|
|
+
|
|
+#
|
|
+# may also be needed; see USB_STORAGE Help for more information
|
|
+#
|
|
+CONFIG_USB_STORAGE=y
|
|
+# CONFIG_USB_STORAGE_DEBUG is not set
|
|
+# CONFIG_USB_STORAGE_DATAFAB is not set
|
|
+# CONFIG_USB_STORAGE_FREECOM is not set
|
|
+# CONFIG_USB_STORAGE_ISD200 is not set
|
|
+# CONFIG_USB_STORAGE_DPCM is not set
|
|
+# CONFIG_USB_STORAGE_USBAT is not set
|
|
+# CONFIG_USB_STORAGE_SDDR09 is not set
|
|
+# CONFIG_USB_STORAGE_SDDR55 is not set
|
|
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
|
|
+# CONFIG_USB_STORAGE_ALAUDA is not set
|
|
+# CONFIG_USB_STORAGE_KARMA is not set
|
|
+# CONFIG_USB_LIBUSUAL is not set
|
|
+
|
|
+#
|
|
+# USB Imaging devices
|
|
+#
|
|
+# CONFIG_USB_MDC800 is not set
|
|
+# CONFIG_USB_MICROTEK is not set
|
|
+CONFIG_USB_MON=y
|
|
+
|
|
+#
|
|
+# USB port drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Serial Converter support
|
|
+#
|
|
+# CONFIG_USB_SERIAL is not set
|
|
+
|
|
+#
|
|
+# USB Miscellaneous drivers
|
|
+#
|
|
+# CONFIG_USB_EMI62 is not set
|
|
+# CONFIG_USB_EMI26 is not set
|
|
+# CONFIG_USB_ADUTUX is not set
|
|
+# CONFIG_USB_AUERSWALD is not set
|
|
+# CONFIG_USB_RIO500 is not set
|
|
+# CONFIG_USB_LEGOTOWER is not set
|
|
+# CONFIG_USB_LCD is not set
|
|
+# CONFIG_USB_BERRY_CHARGE is not set
|
|
+# CONFIG_USB_LED is not set
|
|
+# CONFIG_USB_CYPRESS_CY7C63 is not set
|
|
+# CONFIG_USB_CYTHERM is not set
|
|
+# CONFIG_USB_PHIDGET is not set
|
|
+# CONFIG_USB_IDMOUSE is not set
|
|
+# CONFIG_USB_FTDI_ELAN is not set
|
|
+# CONFIG_USB_APPLEDISPLAY is not set
|
|
+# CONFIG_USB_LD is not set
|
|
+# CONFIG_USB_TRANCEVIBRATOR is not set
|
|
+# CONFIG_USB_IOWARRIOR is not set
|
|
+
|
|
+#
|
|
+# USB DSL modem support
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Gadget Support
|
|
+#
|
|
+# CONFIG_USB_GADGET is not set
|
|
+CONFIG_MMC=y
|
|
+# CONFIG_MMC_DEBUG is not set
|
|
+# CONFIG_MMC_UNSAFE_RESUME is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Card Drivers
|
|
+#
|
|
+CONFIG_MMC_BLOCK=y
|
|
+CONFIG_MMC_BLOCK_BOUNCE=y
|
|
+# CONFIG_SDIO_UART is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Host Controller Drivers
|
|
+#
|
|
+CONFIG_MSC0_JZ4750=y
|
|
+# CONFIG_JZ4750_MSC0_BUS_1 is not set
|
|
+CONFIG_JZ4750_MSC0_BUS_4=y
|
|
+# CONFIG_JZ4750_MSC0_BUS_8 is not set
|
|
+# CONFIG_MSC1_JZ4750 is not set
|
|
+# CONFIG_JZ4750_BOOT_FROM_MSC0 is not set
|
|
+# CONFIG_NEW_LEDS is not set
|
|
+CONFIG_RTC_LIB=y
|
|
+# CONFIG_RTC_CLASS is not set
|
|
+
|
|
+#
|
|
+# Userspace I/O
|
|
+#
|
|
+# CONFIG_UIO is not set
|
|
+
|
|
+#
|
|
+# File systems
|
|
+#
|
|
+CONFIG_EXT2_FS=y
|
|
+CONFIG_EXT2_FS_XATTR=y
|
|
+# CONFIG_EXT2_FS_POSIX_ACL is not set
|
|
+# CONFIG_EXT2_FS_SECURITY is not set
|
|
+# CONFIG_EXT2_FS_XIP is not set
|
|
+# CONFIG_EXT3_FS is not set
|
|
+# CONFIG_EXT4DEV_FS is not set
|
|
+CONFIG_FS_MBCACHE=y
|
|
+# CONFIG_REISERFS_FS is not set
|
|
+# CONFIG_JFS_FS is not set
|
|
+CONFIG_FS_POSIX_ACL=y
|
|
+# CONFIG_XFS_FS is not set
|
|
+# CONFIG_GFS2_FS is not set
|
|
+# CONFIG_OCFS2_FS is not set
|
|
+CONFIG_MINIX_FS=y
|
|
+# CONFIG_ROMFS_FS is not set
|
|
+CONFIG_INOTIFY=y
|
|
+CONFIG_INOTIFY_USER=y
|
|
+# CONFIG_QUOTA is not set
|
|
+CONFIG_DNOTIFY=y
|
|
+# CONFIG_AUTOFS_FS is not set
|
|
+# CONFIG_AUTOFS4_FS is not set
|
|
+# CONFIG_FUSE_FS is not set
|
|
+
|
|
+#
|
|
+# CD-ROM/DVD Filesystems
|
|
+#
|
|
+# CONFIG_ISO9660_FS is not set
|
|
+# CONFIG_UDF_FS is not set
|
|
+
|
|
+#
|
|
+# DOS/FAT/NT Filesystems
|
|
+#
|
|
+CONFIG_FAT_FS=y
|
|
+CONFIG_MSDOS_FS=y
|
|
+CONFIG_VFAT_FS=y
|
|
+CONFIG_FAT_DEFAULT_CODEPAGE=437
|
|
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
|
+# CONFIG_NTFS_FS is not set
|
|
+
|
|
+#
|
|
+# Pseudo filesystems
|
|
+#
|
|
+CONFIG_PROC_FS=y
|
|
+CONFIG_PROC_KCORE=y
|
|
+CONFIG_PROC_SYSCTL=y
|
|
+CONFIG_SYSFS=y
|
|
+CONFIG_TMPFS=y
|
|
+# CONFIG_TMPFS_POSIX_ACL is not set
|
|
+# CONFIG_HUGETLB_PAGE is not set
|
|
+# CONFIG_CONFIGFS_FS is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous filesystems
|
|
+#
|
|
+# CONFIG_ADFS_FS is not set
|
|
+# CONFIG_AFFS_FS is not set
|
|
+# CONFIG_HFS_FS is not set
|
|
+# CONFIG_HFSPLUS_FS is not set
|
|
+# CONFIG_BEFS_FS is not set
|
|
+# CONFIG_BFS_FS is not set
|
|
+# CONFIG_EFS_FS is not set
|
|
+# CONFIG_JFFS2_FS is not set
|
|
+# CONFIG_CRAMFS is not set
|
|
+# CONFIG_VXFS_FS is not set
|
|
+# CONFIG_HPFS_FS is not set
|
|
+# CONFIG_QNX4FS_FS is not set
|
|
+# CONFIG_SYSV_FS is not set
|
|
+# CONFIG_UFS_FS is not set
|
|
+CONFIG_NETWORK_FILESYSTEMS=y
|
|
+CONFIG_NFS_FS=y
|
|
+CONFIG_NFS_V3=y
|
|
+CONFIG_NFS_V3_ACL=y
|
|
+CONFIG_NFS_V4=y
|
|
+CONFIG_NFS_DIRECTIO=y
|
|
+# CONFIG_NFSD is not set
|
|
+CONFIG_ROOT_NFS=y
|
|
+CONFIG_LOCKD=y
|
|
+CONFIG_LOCKD_V4=y
|
|
+CONFIG_NFS_ACL_SUPPORT=y
|
|
+CONFIG_NFS_COMMON=y
|
|
+CONFIG_SUNRPC=y
|
|
+CONFIG_SUNRPC_GSS=y
|
|
+# CONFIG_SUNRPC_BIND34 is not set
|
|
+CONFIG_RPCSEC_GSS_KRB5=y
|
|
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
|
+# CONFIG_SMB_FS is not set
|
|
+# CONFIG_CIFS is not set
|
|
+# CONFIG_NCP_FS is not set
|
|
+# CONFIG_CODA_FS is not set
|
|
+# CONFIG_AFS_FS is not set
|
|
+
|
|
+#
|
|
+# Partition Types
|
|
+#
|
|
+CONFIG_PARTITION_ADVANCED=y
|
|
+# CONFIG_ACORN_PARTITION is not set
|
|
+# CONFIG_OSF_PARTITION is not set
|
|
+# CONFIG_AMIGA_PARTITION is not set
|
|
+# CONFIG_ATARI_PARTITION is not set
|
|
+# CONFIG_MAC_PARTITION is not set
|
|
+CONFIG_MSDOS_PARTITION=y
|
|
+# CONFIG_BSD_DISKLABEL is not set
|
|
+# CONFIG_MINIX_SUBPARTITION is not set
|
|
+# CONFIG_SOLARIS_X86_PARTITION is not set
|
|
+# CONFIG_UNIXWARE_DISKLABEL is not set
|
|
+# CONFIG_LDM_PARTITION is not set
|
|
+# CONFIG_SGI_PARTITION is not set
|
|
+# CONFIG_ULTRIX_PARTITION is not set
|
|
+# CONFIG_SUN_PARTITION is not set
|
|
+# CONFIG_KARMA_PARTITION is not set
|
|
+# CONFIG_EFI_PARTITION is not set
|
|
+# CONFIG_SYSV68_PARTITION is not set
|
|
+CONFIG_NLS=y
|
|
+CONFIG_NLS_DEFAULT="iso8859-1"
|
|
+CONFIG_NLS_CODEPAGE_437=y
|
|
+# CONFIG_NLS_CODEPAGE_737 is not set
|
|
+# CONFIG_NLS_CODEPAGE_775 is not set
|
|
+# CONFIG_NLS_CODEPAGE_850 is not set
|
|
+# CONFIG_NLS_CODEPAGE_852 is not set
|
|
+# CONFIG_NLS_CODEPAGE_855 is not set
|
|
+# CONFIG_NLS_CODEPAGE_857 is not set
|
|
+# CONFIG_NLS_CODEPAGE_860 is not set
|
|
+# CONFIG_NLS_CODEPAGE_861 is not set
|
|
+# CONFIG_NLS_CODEPAGE_862 is not set
|
|
+# CONFIG_NLS_CODEPAGE_863 is not set
|
|
+# CONFIG_NLS_CODEPAGE_864 is not set
|
|
+# CONFIG_NLS_CODEPAGE_865 is not set
|
|
+# CONFIG_NLS_CODEPAGE_866 is not set
|
|
+# CONFIG_NLS_CODEPAGE_869 is not set
|
|
+CONFIG_NLS_CODEPAGE_936=y
|
|
+# CONFIG_NLS_CODEPAGE_950 is not set
|
|
+# CONFIG_NLS_CODEPAGE_932 is not set
|
|
+# CONFIG_NLS_CODEPAGE_949 is not set
|
|
+# CONFIG_NLS_CODEPAGE_874 is not set
|
|
+# CONFIG_NLS_ISO8859_8 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1250 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1251 is not set
|
|
+CONFIG_NLS_ASCII=y
|
|
+CONFIG_NLS_ISO8859_1=y
|
|
+# CONFIG_NLS_ISO8859_2 is not set
|
|
+# CONFIG_NLS_ISO8859_3 is not set
|
|
+# CONFIG_NLS_ISO8859_4 is not set
|
|
+# CONFIG_NLS_ISO8859_5 is not set
|
|
+# CONFIG_NLS_ISO8859_6 is not set
|
|
+# CONFIG_NLS_ISO8859_7 is not set
|
|
+# CONFIG_NLS_ISO8859_9 is not set
|
|
+# CONFIG_NLS_ISO8859_13 is not set
|
|
+# CONFIG_NLS_ISO8859_14 is not set
|
|
+# CONFIG_NLS_ISO8859_15 is not set
|
|
+# CONFIG_NLS_KOI8_R is not set
|
|
+# CONFIG_NLS_KOI8_U is not set
|
|
+# CONFIG_NLS_UTF8 is not set
|
|
+# CONFIG_DLM is not set
|
|
+
|
|
+#
|
|
+# Yaffs2 Filesystems
|
|
+#
|
|
+CONFIG_YAFFS_FS=y
|
|
+CONFIG_YAFFS_YAFFS1=y
|
|
+# CONFIG_YAFFS_DOES_ECC is not set
|
|
+CONFIG_YAFFS_YAFFS2=y
|
|
+CONFIG_YAFFS_AUTO_YAFFS2=y
|
|
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
|
|
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
|
|
+CONFIG_YAFFS_DISABLE_CHUNK_ERASED_CHECK=y
|
|
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
|
|
+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
|
|
+CONFIG_INSTRUMENTATION=y
|
|
+# CONFIG_PROFILING is not set
|
|
+# CONFIG_MARKERS is not set
|
|
+
|
|
+#
|
|
+# Kernel hacking
|
|
+#
|
|
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
+# CONFIG_PRINTK_TIME is not set
|
|
+CONFIG_ENABLE_WARN_DEPRECATED=y
|
|
+CONFIG_ENABLE_MUST_CHECK=y
|
|
+CONFIG_MAGIC_SYSRQ=y
|
|
+# CONFIG_UNUSED_SYMBOLS is not set
|
|
+# CONFIG_DEBUG_FS is not set
|
|
+# CONFIG_HEADERS_CHECK is not set
|
|
+# CONFIG_DEBUG_KERNEL is not set
|
|
+# CONFIG_SAMPLES is not set
|
|
+CONFIG_CMDLINE=""
|
|
+
|
|
+#
|
|
+# Security options
|
|
+#
|
|
+# CONFIG_KEYS is not set
|
|
+# CONFIG_SECURITY is not set
|
|
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
|
+CONFIG_CRYPTO=y
|
|
+CONFIG_CRYPTO_ALGAPI=y
|
|
+CONFIG_CRYPTO_BLKCIPHER=y
|
|
+CONFIG_CRYPTO_MANAGER=y
|
|
+# CONFIG_CRYPTO_HMAC is not set
|
|
+# CONFIG_CRYPTO_XCBC is not set
|
|
+# CONFIG_CRYPTO_NULL is not set
|
|
+# CONFIG_CRYPTO_MD4 is not set
|
|
+CONFIG_CRYPTO_MD5=y
|
|
+# CONFIG_CRYPTO_SHA1 is not set
|
|
+# CONFIG_CRYPTO_SHA256 is not set
|
|
+# CONFIG_CRYPTO_SHA512 is not set
|
|
+# CONFIG_CRYPTO_WP512 is not set
|
|
+# CONFIG_CRYPTO_TGR192 is not set
|
|
+# CONFIG_CRYPTO_GF128MUL is not set
|
|
+# CONFIG_CRYPTO_ECB is not set
|
|
+CONFIG_CRYPTO_CBC=y
|
|
+# CONFIG_CRYPTO_PCBC is not set
|
|
+# CONFIG_CRYPTO_LRW is not set
|
|
+# CONFIG_CRYPTO_XTS is not set
|
|
+# CONFIG_CRYPTO_CRYPTD is not set
|
|
+CONFIG_CRYPTO_DES=y
|
|
+# CONFIG_CRYPTO_FCRYPT is not set
|
|
+# CONFIG_CRYPTO_BLOWFISH is not set
|
|
+# CONFIG_CRYPTO_TWOFISH is not set
|
|
+# CONFIG_CRYPTO_SERPENT is not set
|
|
+# CONFIG_CRYPTO_AES is not set
|
|
+# CONFIG_CRYPTO_CAST5 is not set
|
|
+# CONFIG_CRYPTO_CAST6 is not set
|
|
+# CONFIG_CRYPTO_TEA is not set
|
|
+# CONFIG_CRYPTO_ARC4 is not set
|
|
+# CONFIG_CRYPTO_KHAZAD is not set
|
|
+# CONFIG_CRYPTO_ANUBIS is not set
|
|
+# CONFIG_CRYPTO_SEED is not set
|
|
+# CONFIG_CRYPTO_DEFLATE is not set
|
|
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
|
|
+# CONFIG_CRYPTO_CRC32C is not set
|
|
+# CONFIG_CRYPTO_CAMELLIA is not set
|
|
+# CONFIG_CRYPTO_TEST is not set
|
|
+# CONFIG_CRYPTO_AUTHENC is not set
|
|
+# CONFIG_CRYPTO_LZO is not set
|
|
+CONFIG_CRYPTO_HW=y
|
|
+
|
|
+#
|
|
+# Library routines
|
|
+#
|
|
+CONFIG_BITREVERSE=y
|
|
+# CONFIG_CRC_CCITT is not set
|
|
+# CONFIG_CRC16 is not set
|
|
+# CONFIG_CRC_ITU_T is not set
|
|
+CONFIG_CRC32=y
|
|
+# CONFIG_CRC7 is not set
|
|
+# CONFIG_LIBCRC32C is not set
|
|
+CONFIG_PLIST=y
|
|
+CONFIG_HAS_IOMEM=y
|
|
+CONFIG_HAS_IOPORT=y
|
|
+CONFIG_HAS_DMA=y
|
|
--- linux-2.6.24.7.old/arch/mips/configs/dipper_defconfig 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/configs/dipper_defconfig 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,1281 @@
|
|
+#
|
|
+# Automatically generated make config: don't edit
|
|
+# Linux kernel version: 2.6.24.3
|
|
+# Thu Jun 12 13:55:45 2008
|
|
+#
|
|
+CONFIG_MIPS=y
|
|
+
|
|
+#
|
|
+# Machine selection
|
|
+#
|
|
+# CONFIG_JZ4730_PMP is not set
|
|
+# CONFIG_JZ4740_PAVO is not set
|
|
+# CONFIG_JZ4740_LEO is not set
|
|
+# CONFIG_JZ4740_LYRA is not set
|
|
+CONFIG_JZ4725_DIPPER=y
|
|
+# CONFIG_JZ4720_VIRGO is not set
|
|
+# CONFIG_JZ4750_FUWA is not set
|
|
+# CONFIG_MACH_ALCHEMY is not set
|
|
+# CONFIG_BASLER_EXCITE is not set
|
|
+# CONFIG_BCM47XX is not set
|
|
+# CONFIG_MIPS_COBALT is not set
|
|
+# CONFIG_MACH_DECSTATION is not set
|
|
+# CONFIG_MACH_JAZZ is not set
|
|
+# CONFIG_LASAT is not set
|
|
+# CONFIG_LEMOTE_FULONG is not set
|
|
+# CONFIG_MIPS_ATLAS is not set
|
|
+# CONFIG_MIPS_MALTA is not set
|
|
+# CONFIG_MIPS_SEAD is not set
|
|
+# CONFIG_MIPS_SIM is not set
|
|
+# CONFIG_MARKEINS is not set
|
|
+# CONFIG_MACH_VR41XX is not set
|
|
+# CONFIG_PNX8550_JBS is not set
|
|
+# CONFIG_PNX8550_STB810 is not set
|
|
+# CONFIG_PMC_MSP is not set
|
|
+# CONFIG_PMC_YOSEMITE is not set
|
|
+# CONFIG_QEMU is not set
|
|
+# CONFIG_SGI_IP22 is not set
|
|
+# CONFIG_SGI_IP27 is not set
|
|
+# CONFIG_SGI_IP32 is not set
|
|
+# CONFIG_SIBYTE_CRHINE is not set
|
|
+# CONFIG_SIBYTE_CARMEL is not set
|
|
+# CONFIG_SIBYTE_CRHONE is not set
|
|
+# CONFIG_SIBYTE_RHONE is not set
|
|
+# CONFIG_SIBYTE_SWARM is not set
|
|
+# CONFIG_SIBYTE_LITTLESUR is not set
|
|
+# CONFIG_SIBYTE_SENTOSA is not set
|
|
+# CONFIG_SIBYTE_PTSWARM is not set
|
|
+# CONFIG_SIBYTE_BIGSUR is not set
|
|
+# CONFIG_SNI_RM is not set
|
|
+# CONFIG_TOSHIBA_JMR3927 is not set
|
|
+# CONFIG_TOSHIBA_RBTX4927 is not set
|
|
+# CONFIG_TOSHIBA_RBTX4938 is not set
|
|
+# CONFIG_WR_PPMC is not set
|
|
+CONFIG_SOC_JZ4740=y
|
|
+CONFIG_SOC_JZ4725=y
|
|
+CONFIG_JZSOC=y
|
|
+CONFIG_JZRISC=y
|
|
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
|
+CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|
+CONFIG_GENERIC_HWEIGHT=y
|
|
+CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
+CONFIG_GENERIC_CLOCKEVENTS=y
|
|
+CONFIG_GENERIC_TIME=y
|
|
+CONFIG_GENERIC_CMOS_UPDATE=y
|
|
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
|
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
|
|
+CONFIG_DMA_NONCOHERENT=y
|
|
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
|
+# CONFIG_HOTPLUG_CPU is not set
|
|
+# CONFIG_NO_IOPORT is not set
|
|
+# CONFIG_CPU_BIG_ENDIAN is not set
|
|
+CONFIG_CPU_LITTLE_ENDIAN=y
|
|
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
|
+CONFIG_MIPS_L1_CACHE_SHIFT=5
|
|
+
|
|
+#
|
|
+# CPU selection
|
|
+#
|
|
+# CONFIG_CPU_LOONGSON2 is not set
|
|
+CONFIG_CPU_MIPS32_R1=y
|
|
+# CONFIG_CPU_MIPS32_R2 is not set
|
|
+# CONFIG_CPU_MIPS64_R1 is not set
|
|
+# CONFIG_CPU_MIPS64_R2 is not set
|
|
+# CONFIG_CPU_R3000 is not set
|
|
+# CONFIG_CPU_TX39XX is not set
|
|
+# CONFIG_CPU_VR41XX is not set
|
|
+# CONFIG_CPU_R4300 is not set
|
|
+# CONFIG_CPU_R4X00 is not set
|
|
+# CONFIG_CPU_TX49XX is not set
|
|
+# CONFIG_CPU_R5000 is not set
|
|
+# CONFIG_CPU_R5432 is not set
|
|
+# CONFIG_CPU_R6000 is not set
|
|
+# CONFIG_CPU_NEVADA is not set
|
|
+# CONFIG_CPU_R8000 is not set
|
|
+# CONFIG_CPU_R10000 is not set
|
|
+# CONFIG_CPU_RM7000 is not set
|
|
+# CONFIG_CPU_RM9000 is not set
|
|
+# CONFIG_CPU_SB1 is not set
|
|
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
|
+CONFIG_CPU_MIPS32=y
|
|
+CONFIG_CPU_MIPSR1=y
|
|
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
|
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
|
+
|
|
+#
|
|
+# Kernel type
|
|
+#
|
|
+CONFIG_32BIT=y
|
|
+# CONFIG_64BIT is not set
|
|
+CONFIG_PAGE_SIZE_4KB=y
|
|
+# CONFIG_PAGE_SIZE_8KB is not set
|
|
+# CONFIG_PAGE_SIZE_16KB is not set
|
|
+# CONFIG_PAGE_SIZE_64KB is not set
|
|
+CONFIG_CPU_HAS_PREFETCH=y
|
|
+CONFIG_MIPS_MT_DISABLED=y
|
|
+# CONFIG_MIPS_MT_SMP is not set
|
|
+# CONFIG_MIPS_MT_SMTC is not set
|
|
+CONFIG_CPU_HAS_LLSC=y
|
|
+CONFIG_CPU_HAS_SYNC=y
|
|
+CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_GENERIC_IRQ_PROBE=y
|
|
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
|
+CONFIG_ARCH_FLATMEM_ENABLE=y
|
|
+CONFIG_ARCH_POPULATES_NODE_MAP=y
|
|
+CONFIG_SELECT_MEMORY_MODEL=y
|
|
+CONFIG_FLATMEM_MANUAL=y
|
|
+# CONFIG_DISCONTIGMEM_MANUAL is not set
|
|
+# CONFIG_SPARSEMEM_MANUAL is not set
|
|
+CONFIG_FLATMEM=y
|
|
+CONFIG_FLAT_NODE_MEM_MAP=y
|
|
+# CONFIG_SPARSEMEM_STATIC is not set
|
|
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
|
+CONFIG_SPLIT_PTLOCK_CPUS=4
|
|
+# CONFIG_RESOURCES_64BIT is not set
|
|
+CONFIG_ZONE_DMA_FLAG=0
|
|
+CONFIG_VIRT_TO_BUS=y
|
|
+# CONFIG_TICK_ONESHOT is not set
|
|
+# CONFIG_NO_HZ is not set
|
|
+# CONFIG_HIGH_RES_TIMERS is not set
|
|
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
+# CONFIG_HZ_48 is not set
|
|
+CONFIG_HZ_100=y
|
|
+# CONFIG_HZ_128 is not set
|
|
+# CONFIG_HZ_250 is not set
|
|
+# CONFIG_HZ_256 is not set
|
|
+# CONFIG_HZ_1000 is not set
|
|
+# CONFIG_HZ_1024 is not set
|
|
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
|
+CONFIG_HZ=100
|
|
+# CONFIG_PREEMPT_NONE is not set
|
|
+# CONFIG_PREEMPT_VOLUNTARY is not set
|
|
+CONFIG_PREEMPT=y
|
|
+CONFIG_PREEMPT_BKL=y
|
|
+# CONFIG_KEXEC is not set
|
|
+CONFIG_SECCOMP=y
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
+
|
|
+#
|
|
+# General setup
|
|
+#
|
|
+CONFIG_EXPERIMENTAL=y
|
|
+CONFIG_BROKEN_ON_SMP=y
|
|
+CONFIG_LOCK_KERNEL=y
|
|
+CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
+CONFIG_LOCALVERSION=""
|
|
+CONFIG_LOCALVERSION_AUTO=y
|
|
+CONFIG_SWAP=y
|
|
+CONFIG_SYSVIPC=y
|
|
+CONFIG_SYSVIPC_SYSCTL=y
|
|
+# CONFIG_POSIX_MQUEUE is not set
|
|
+# CONFIG_BSD_PROCESS_ACCT is not set
|
|
+# CONFIG_TASKSTATS is not set
|
|
+# CONFIG_USER_NS is not set
|
|
+# CONFIG_PID_NS is not set
|
|
+# CONFIG_AUDIT is not set
|
|
+# CONFIG_IKCONFIG is not set
|
|
+CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_CGROUPS is not set
|
|
+CONFIG_FAIR_GROUP_SCHED=y
|
|
+CONFIG_FAIR_USER_SCHED=y
|
|
+# CONFIG_FAIR_CGROUP_SCHED is not set
|
|
+CONFIG_SYSFS_DEPRECATED=y
|
|
+CONFIG_RELAY=y
|
|
+# CONFIG_BLK_DEV_INITRD is not set
|
|
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
|
+CONFIG_SYSCTL=y
|
|
+CONFIG_EMBEDDED=y
|
|
+CONFIG_SYSCTL_SYSCALL=y
|
|
+CONFIG_KALLSYMS=y
|
|
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
|
+CONFIG_HOTPLUG=y
|
|
+CONFIG_PRINTK=y
|
|
+CONFIG_BUG=y
|
|
+CONFIG_ELF_CORE=y
|
|
+CONFIG_BASE_FULL=y
|
|
+CONFIG_FUTEX=y
|
|
+CONFIG_ANON_INODES=y
|
|
+CONFIG_EPOLL=y
|
|
+CONFIG_SIGNALFD=y
|
|
+CONFIG_EVENTFD=y
|
|
+CONFIG_SHMEM=y
|
|
+CONFIG_VM_EVENT_COUNTERS=y
|
|
+CONFIG_SLAB=y
|
|
+# CONFIG_SLUB is not set
|
|
+# CONFIG_SLOB is not set
|
|
+CONFIG_SLABINFO=y
|
|
+CONFIG_RT_MUTEXES=y
|
|
+# CONFIG_TINY_SHMEM is not set
|
|
+CONFIG_BASE_SMALL=0
|
|
+CONFIG_MODULES=y
|
|
+CONFIG_MODULE_UNLOAD=y
|
|
+# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
+CONFIG_MODVERSIONS=y
|
|
+CONFIG_MODULE_SRCVERSION_ALL=y
|
|
+CONFIG_KMOD=y
|
|
+CONFIG_BLOCK=y
|
|
+# CONFIG_LBD is not set
|
|
+# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
+# CONFIG_LSF is not set
|
|
+# CONFIG_BLK_DEV_BSG is not set
|
|
+
|
|
+#
|
|
+# IO Schedulers
|
|
+#
|
|
+CONFIG_IOSCHED_NOOP=y
|
|
+CONFIG_IOSCHED_AS=y
|
|
+CONFIG_IOSCHED_DEADLINE=y
|
|
+CONFIG_IOSCHED_CFQ=y
|
|
+CONFIG_DEFAULT_AS=y
|
|
+# CONFIG_DEFAULT_DEADLINE is not set
|
|
+# CONFIG_DEFAULT_CFQ is not set
|
|
+# CONFIG_DEFAULT_NOOP is not set
|
|
+CONFIG_DEFAULT_IOSCHED="anticipatory"
|
|
+
|
|
+#
|
|
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
|
|
+#
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
+CONFIG_MMU=y
|
|
+# CONFIG_PCCARD is not set
|
|
+
|
|
+#
|
|
+# Executable file formats
|
|
+#
|
|
+CONFIG_BINFMT_ELF=y
|
|
+# CONFIG_BINFMT_MISC is not set
|
|
+CONFIG_TRAD_SIGNALS=y
|
|
+
|
|
+#
|
|
+# CPU Frequency scaling
|
|
+#
|
|
+CONFIG_CPU_FREQ_JZ=y
|
|
+CONFIG_CPU_FREQ=y
|
|
+CONFIG_CPU_FREQ_TABLE=y
|
|
+# CONFIG_CPU_FREQ_DEBUG is not set
|
|
+CONFIG_CPU_FREQ_STAT=y
|
|
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
|
|
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
|
|
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
|
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
|
|
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
|
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
|
|
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
|
|
+
|
|
+#
|
|
+# Power management options
|
|
+#
|
|
+CONFIG_PM=y
|
|
+CONFIG_PM_LEGACY=y
|
|
+# CONFIG_PM_DEBUG is not set
|
|
+CONFIG_SUSPEND_UP_POSSIBLE=y
|
|
+# CONFIG_SUSPEND is not set
|
|
+
|
|
+#
|
|
+# Networking
|
|
+#
|
|
+CONFIG_NET=y
|
|
+
|
|
+#
|
|
+# Networking options
|
|
+#
|
|
+CONFIG_PACKET=y
|
|
+# CONFIG_PACKET_MMAP is not set
|
|
+CONFIG_UNIX=y
|
|
+# CONFIG_NET_KEY is not set
|
|
+CONFIG_INET=y
|
|
+# CONFIG_IP_MULTICAST is not set
|
|
+# CONFIG_IP_ADVANCED_ROUTER is not set
|
|
+CONFIG_IP_FIB_HASH=y
|
|
+CONFIG_IP_PNP=y
|
|
+CONFIG_IP_PNP_DHCP=y
|
|
+CONFIG_IP_PNP_BOOTP=y
|
|
+# CONFIG_IP_PNP_RARP is not set
|
|
+# CONFIG_NET_IPIP is not set
|
|
+# CONFIG_NET_IPGRE is not set
|
|
+# CONFIG_ARPD is not set
|
|
+# CONFIG_SYN_COOKIES is not set
|
|
+# CONFIG_INET_AH is not set
|
|
+# CONFIG_INET_ESP is not set
|
|
+# CONFIG_INET_IPCOMP is not set
|
|
+# CONFIG_INET_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
|
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_BEET is not set
|
|
+# CONFIG_INET_LRO is not set
|
|
+# CONFIG_INET_DIAG is not set
|
|
+# CONFIG_TCP_CONG_ADVANCED is not set
|
|
+CONFIG_TCP_CONG_CUBIC=y
|
|
+CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
+# CONFIG_TCP_MD5SIG is not set
|
|
+# CONFIG_IPV6 is not set
|
|
+# CONFIG_INET6_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET6_TUNNEL is not set
|
|
+# CONFIG_NETWORK_SECMARK is not set
|
|
+# CONFIG_NETFILTER is not set
|
|
+# CONFIG_IP_DCCP is not set
|
|
+# CONFIG_IP_SCTP is not set
|
|
+# CONFIG_TIPC is not set
|
|
+# CONFIG_ATM is not set
|
|
+# CONFIG_BRIDGE is not set
|
|
+# CONFIG_VLAN_8021Q is not set
|
|
+# CONFIG_DECNET is not set
|
|
+# CONFIG_LLC2 is not set
|
|
+# CONFIG_IPX is not set
|
|
+# CONFIG_ATALK is not set
|
|
+# CONFIG_X25 is not set
|
|
+# CONFIG_LAPB is not set
|
|
+# CONFIG_ECONET is not set
|
|
+# CONFIG_WAN_ROUTER is not set
|
|
+# CONFIG_NET_SCHED is not set
|
|
+
|
|
+#
|
|
+# Network testing
|
|
+#
|
|
+# CONFIG_NET_PKTGEN is not set
|
|
+# CONFIG_HAMRADIO is not set
|
|
+# CONFIG_IRDA is not set
|
|
+# CONFIG_BT is not set
|
|
+# CONFIG_AF_RXRPC is not set
|
|
+
|
|
+#
|
|
+# Wireless
|
|
+#
|
|
+# CONFIG_CFG80211 is not set
|
|
+CONFIG_WIRELESS_EXT=y
|
|
+# CONFIG_MAC80211 is not set
|
|
+# CONFIG_IEEE80211 is not set
|
|
+# CONFIG_RFKILL is not set
|
|
+# CONFIG_NET_9P is not set
|
|
+
|
|
+#
|
|
+# Device Drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# Generic Driver Options
|
|
+#
|
|
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
+CONFIG_STANDALONE=y
|
|
+CONFIG_PREVENT_FIRMWARE_BUILD=y
|
|
+# CONFIG_FW_LOADER is not set
|
|
+# CONFIG_SYS_HYPERVISOR is not set
|
|
+# CONFIG_CONNECTOR is not set
|
|
+CONFIG_MTD=y
|
|
+# CONFIG_MTD_DEBUG is not set
|
|
+# CONFIG_MTD_CONCAT is not set
|
|
+CONFIG_MTD_PARTITIONS=y
|
|
+# CONFIG_MTD_REDBOOT_PARTS is not set
|
|
+# CONFIG_MTD_CMDLINE_PARTS is not set
|
|
+
|
|
+#
|
|
+# User Modules And Translation Layers
|
|
+#
|
|
+CONFIG_MTD_CHAR=y
|
|
+CONFIG_MTD_BLKDEVS=y
|
|
+CONFIG_MTD_BLOCK=y
|
|
+# CONFIG_FTL is not set
|
|
+# CONFIG_NFTL is not set
|
|
+# CONFIG_INFTL is not set
|
|
+# CONFIG_RFD_FTL is not set
|
|
+# CONFIG_SSFDC is not set
|
|
+# CONFIG_MTD_OOPS is not set
|
|
+
|
|
+#
|
|
+# RAM/ROM/Flash chip drivers
|
|
+#
|
|
+# CONFIG_MTD_CFI is not set
|
|
+# CONFIG_MTD_JEDECPROBE is not set
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
|
+CONFIG_MTD_CFI_I1=y
|
|
+CONFIG_MTD_CFI_I2=y
|
|
+# CONFIG_MTD_CFI_I4 is not set
|
|
+# CONFIG_MTD_CFI_I8 is not set
|
|
+# CONFIG_MTD_RAM is not set
|
|
+# CONFIG_MTD_ROM is not set
|
|
+# CONFIG_MTD_ABSENT is not set
|
|
+
|
|
+#
|
|
+# Mapping drivers for chip access
|
|
+#
|
|
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
|
+# CONFIG_MTD_PLATRAM is not set
|
|
+
|
|
+#
|
|
+# Self-contained MTD device drivers
|
|
+#
|
|
+# CONFIG_MTD_SLRAM is not set
|
|
+# CONFIG_MTD_PHRAM is not set
|
|
+# CONFIG_MTD_MTDRAM is not set
|
|
+# CONFIG_MTD_BLOCK2MTD is not set
|
|
+
|
|
+#
|
|
+# Disk-On-Chip Device Drivers
|
|
+#
|
|
+# CONFIG_MTD_DOC2000 is not set
|
|
+# CONFIG_MTD_DOC2001 is not set
|
|
+# CONFIG_MTD_DOC2001PLUS is not set
|
|
+CONFIG_MTD_NAND=y
|
|
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
|
|
+# CONFIG_MTD_NAND_ECC_SMC is not set
|
|
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
|
|
+CONFIG_MTD_NAND_IDS=y
|
|
+# CONFIG_MTD_NAND_DISKONCHIP is not set
|
|
+# CONFIG_MTD_NAND_NANDSIM is not set
|
|
+# CONFIG_MTD_NAND_PLATFORM is not set
|
|
+# CONFIG_MTD_ALAUDA is not set
|
|
+CONFIG_MTD_NAND_JZ4740=y
|
|
+# CONFIG_MTD_HW_HM_ECC is not set
|
|
+# CONFIG_MTD_SW_HM_ECC is not set
|
|
+CONFIG_MTD_HW_RS_ECC=y
|
|
+# CONFIG_MTD_MTDBLOCK_WRITE_VERIFY_ENABLE is not set
|
|
+CONFIG_MTD_OOB_COPIES=3
|
|
+CONFIG_MTD_BADBLOCK_FLAG_PAGE=0
|
|
+# CONFIG_MTD_ONENAND is not set
|
|
+
|
|
+#
|
|
+# UBI - Unsorted block images
|
|
+#
|
|
+CONFIG_MTD_UBI=m
|
|
+CONFIG_MTD_UBI_WL_THRESHOLD=256
|
|
+CONFIG_MTD_UBI_BEB_RESERVE=1
|
|
+# CONFIG_MTD_UBI_GLUEBI is not set
|
|
+
|
|
+#
|
|
+# UBI debugging options
|
|
+#
|
|
+# CONFIG_MTD_UBI_DEBUG is not set
|
|
+CONFIG_MTD_UBI_BLKDEVS=m
|
|
+CONFIG_MTD_UBI_BLOCK=m
|
|
+# CONFIG_PARPORT is not set
|
|
+CONFIG_PNP=y
|
|
+# CONFIG_PNP_DEBUG is not set
|
|
+
|
|
+#
|
|
+# Protocols
|
|
+#
|
|
+# CONFIG_PNPACPI is not set
|
|
+CONFIG_BLK_DEV=y
|
|
+# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
+CONFIG_BLK_DEV_LOOP=y
|
|
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
|
+# CONFIG_BLK_DEV_NBD is not set
|
|
+# CONFIG_BLK_DEV_UB is not set
|
|
+CONFIG_BLK_DEV_RAM=y
|
|
+CONFIG_BLK_DEV_RAM_COUNT=2
|
|
+CONFIG_BLK_DEV_RAM_SIZE=4096
|
|
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
+# CONFIG_CDROM_PKTCDVD is not set
|
|
+# CONFIG_ATA_OVER_ETH is not set
|
|
+CONFIG_MISC_DEVICES=y
|
|
+# CONFIG_EEPROM_93CX6 is not set
|
|
+# CONFIG_IDE is not set
|
|
+
|
|
+#
|
|
+# SCSI device support
|
|
+#
|
|
+# CONFIG_RAID_ATTRS is not set
|
|
+CONFIG_SCSI=y
|
|
+CONFIG_SCSI_DMA=y
|
|
+# CONFIG_SCSI_TGT is not set
|
|
+# CONFIG_SCSI_NETLINK is not set
|
|
+CONFIG_SCSI_PROC_FS=y
|
|
+
|
|
+#
|
|
+# SCSI support type (disk, tape, CD-ROM)
|
|
+#
|
|
+CONFIG_BLK_DEV_SD=y
|
|
+# CONFIG_CHR_DEV_ST is not set
|
|
+# CONFIG_CHR_DEV_OSST is not set
|
|
+# CONFIG_BLK_DEV_SR is not set
|
|
+# CONFIG_CHR_DEV_SG is not set
|
|
+# CONFIG_CHR_DEV_SCH is not set
|
|
+
|
|
+#
|
|
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
|
+#
|
|
+# CONFIG_SCSI_MULTI_LUN is not set
|
|
+# CONFIG_SCSI_CONSTANTS is not set
|
|
+# CONFIG_SCSI_LOGGING is not set
|
|
+# CONFIG_SCSI_SCAN_ASYNC is not set
|
|
+CONFIG_SCSI_WAIT_SCAN=m
|
|
+
|
|
+#
|
|
+# SCSI Transports
|
|
+#
|
|
+# CONFIG_SCSI_SPI_ATTRS is not set
|
|
+# CONFIG_SCSI_FC_ATTRS is not set
|
|
+# CONFIG_SCSI_ISCSI_ATTRS is not set
|
|
+# CONFIG_SCSI_SAS_LIBSAS is not set
|
|
+# CONFIG_SCSI_SRP_ATTRS is not set
|
|
+CONFIG_SCSI_LOWLEVEL=y
|
|
+# CONFIG_ISCSI_TCP is not set
|
|
+# CONFIG_SCSI_DEBUG is not set
|
|
+# CONFIG_ATA is not set
|
|
+# CONFIG_MD is not set
|
|
+CONFIG_NETDEVICES=y
|
|
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
|
+# CONFIG_DUMMY is not set
|
|
+# CONFIG_BONDING is not set
|
|
+# CONFIG_MACVLAN is not set
|
|
+# CONFIG_EQUALIZER is not set
|
|
+# CONFIG_TUN is not set
|
|
+# CONFIG_VETH is not set
|
|
+# CONFIG_NET_SB1000 is not set
|
|
+CONFIG_PHYLIB=y
|
|
+
|
|
+#
|
|
+# MII PHY device drivers
|
|
+#
|
|
+# CONFIG_MARVELL_PHY is not set
|
|
+# CONFIG_DAVICOM_PHY is not set
|
|
+# CONFIG_QSEMI_PHY is not set
|
|
+# CONFIG_LXT_PHY is not set
|
|
+# CONFIG_CICADA_PHY is not set
|
|
+# CONFIG_VITESSE_PHY is not set
|
|
+# CONFIG_SMSC_PHY is not set
|
|
+# CONFIG_BROADCOM_PHY is not set
|
|
+# CONFIG_ICPLUS_PHY is not set
|
|
+# CONFIG_FIXED_PHY is not set
|
|
+# CONFIG_MDIO_BITBANG is not set
|
|
+CONFIG_NET_ETHERNET=y
|
|
+CONFIG_MII=y
|
|
+CONFIG_JZCS8900=y
|
|
+# CONFIG_AX88796 is not set
|
|
+# CONFIG_DM9000 is not set
|
|
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_TAH is not set
|
|
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
|
+# CONFIG_B44 is not set
|
|
+# CONFIG_NETDEV_1000 is not set
|
|
+# CONFIG_NETDEV_10000 is not set
|
|
+
|
|
+#
|
|
+# Wireless LAN
|
|
+#
|
|
+# CONFIG_WLAN_PRE80211 is not set
|
|
+# CONFIG_WLAN_80211 is not set
|
|
+
|
|
+#
|
|
+# USB Network Adapters
|
|
+#
|
|
+# CONFIG_USB_CATC is not set
|
|
+# CONFIG_USB_KAWETH is not set
|
|
+# CONFIG_USB_PEGASUS is not set
|
|
+# CONFIG_USB_RTL8150 is not set
|
|
+# CONFIG_USB_USBNET is not set
|
|
+# CONFIG_WAN is not set
|
|
+# CONFIG_PPP is not set
|
|
+# CONFIG_SLIP is not set
|
|
+# CONFIG_SHAPER is not set
|
|
+# CONFIG_NETCONSOLE is not set
|
|
+# CONFIG_NETPOLL is not set
|
|
+# CONFIG_NET_POLL_CONTROLLER is not set
|
|
+# CONFIG_ISDN is not set
|
|
+# CONFIG_PHONE is not set
|
|
+
|
|
+#
|
|
+# Input device support
|
|
+#
|
|
+CONFIG_INPUT=y
|
|
+# CONFIG_INPUT_FF_MEMLESS is not set
|
|
+# CONFIG_INPUT_POLLDEV is not set
|
|
+
|
|
+#
|
|
+# Userland interfaces
|
|
+#
|
|
+CONFIG_INPUT_MOUSEDEV=y
|
|
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
|
+# CONFIG_INPUT_JOYDEV is not set
|
|
+CONFIG_INPUT_EVDEV=y
|
|
+# CONFIG_INPUT_EVBUG is not set
|
|
+
|
|
+#
|
|
+# Input Device Drivers
|
|
+#
|
|
+# CONFIG_INPUT_KEYBOARD is not set
|
|
+# CONFIG_INPUT_MOUSE is not set
|
|
+# CONFIG_INPUT_JOYSTICK is not set
|
|
+# CONFIG_INPUT_TABLET is not set
|
|
+# CONFIG_INPUT_TOUCHSCREEN is not set
|
|
+# CONFIG_INPUT_MISC is not set
|
|
+
|
|
+#
|
|
+# Hardware I/O ports
|
|
+#
|
|
+CONFIG_SERIO=y
|
|
+# CONFIG_SERIO_I8042 is not set
|
|
+CONFIG_SERIO_SERPORT=y
|
|
+# CONFIG_SERIO_LIBPS2 is not set
|
|
+# CONFIG_SERIO_RAW is not set
|
|
+# CONFIG_GAMEPORT is not set
|
|
+
|
|
+#
|
|
+# Character devices
|
|
+#
|
|
+CONFIG_VT=y
|
|
+CONFIG_VT_CONSOLE=y
|
|
+CONFIG_HW_CONSOLE=y
|
|
+CONFIG_VT_HW_CONSOLE_BINDING=y
|
|
+# CONFIG_SERIAL_NONSTANDARD is not set
|
|
+
|
|
+#
|
|
+# Serial drivers
|
|
+#
|
|
+CONFIG_SERIAL_8250=y
|
|
+CONFIG_SERIAL_8250_CONSOLE=y
|
|
+CONFIG_SERIAL_8250_PNP=y
|
|
+CONFIG_SERIAL_8250_NR_UARTS=2
|
|
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
|
|
+# CONFIG_SERIAL_8250_EXTENDED is not set
|
|
+
|
|
+#
|
|
+# Non-8250 serial port support
|
|
+#
|
|
+CONFIG_SERIAL_CORE=y
|
|
+CONFIG_SERIAL_CORE_CONSOLE=y
|
|
+CONFIG_UNIX98_PTYS=y
|
|
+CONFIG_LEGACY_PTYS=y
|
|
+CONFIG_LEGACY_PTY_COUNT=2
|
|
+# CONFIG_IPMI_HANDLER is not set
|
|
+# CONFIG_HW_RANDOM is not set
|
|
+# CONFIG_RTC is not set
|
|
+# CONFIG_RTC_PCF8563 is not set
|
|
+CONFIG_RTC_JZ=y
|
|
+# CONFIG_R3964 is not set
|
|
+# CONFIG_RAW_DRIVER is not set
|
|
+# CONFIG_TCG_TPM is not set
|
|
+
|
|
+#
|
|
+# JZSOC char device support
|
|
+#
|
|
+CONFIG_JZCHAR=y
|
|
+# CONFIG_JZ_CIM is not set
|
|
+# CONFIG_JZ_TPANEL_ATA2508 is not set
|
|
+CONFIG_JZ_TPANEL=y
|
|
+CONFIG_JZ_SADC=y
|
|
+# CONFIG_JZ_TPANEL_AK4182 is not set
|
|
+# CONFIG_JZ_TPANEL_UCB1400 is not set
|
|
+# CONFIG_JZ_TPANEL_WM9712 is not set
|
|
+CONFIG_JZ_UDC_HOTPLUG=y
|
|
+CONFIG_JZ_POWEROFF=y
|
|
+# CONFIG_JZ_OW is not set
|
|
+# CONFIG_I2C is not set
|
|
+
|
|
+#
|
|
+# SPI support
|
|
+#
|
|
+# CONFIG_SPI is not set
|
|
+# CONFIG_SPI_MASTER is not set
|
|
+# CONFIG_W1 is not set
|
|
+# CONFIG_POWER_SUPPLY is not set
|
|
+# CONFIG_HWMON is not set
|
|
+CONFIG_WATCHDOG=y
|
|
+# CONFIG_WATCHDOG_NOWAYOUT is not set
|
|
+
|
|
+#
|
|
+# Watchdog Device Drivers
|
|
+#
|
|
+CONFIG_JZ_WDT=y
|
|
+# CONFIG_SOFT_WATCHDOG is not set
|
|
+
|
|
+#
|
|
+# USB-based Watchdog Cards
|
|
+#
|
|
+# CONFIG_USBPCWATCHDOG is not set
|
|
+
|
|
+#
|
|
+# Sonics Silicon Backplane
|
|
+#
|
|
+CONFIG_SSB_POSSIBLE=y
|
|
+# CONFIG_SSB is not set
|
|
+
|
|
+#
|
|
+# Multifunction device drivers
|
|
+#
|
|
+# CONFIG_MFD_SM501 is not set
|
|
+
|
|
+#
|
|
+# Multimedia devices
|
|
+#
|
|
+CONFIG_VIDEO_DEV=y
|
|
+CONFIG_VIDEO_V4L1=y
|
|
+CONFIG_VIDEO_V4L1_COMPAT=y
|
|
+CONFIG_VIDEO_V4L2=y
|
|
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
|
|
+# CONFIG_VIDEO_ADV_DEBUG is not set
|
|
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
|
|
+# CONFIG_VIDEO_VIVI is not set
|
|
+# CONFIG_VIDEO_CPIA is not set
|
|
+# CONFIG_VIDEO_CPIA2 is not set
|
|
+CONFIG_VIDEO_JZ_CIM=y
|
|
+CONFIG_VIDEO_JZ_SENSOR=y
|
|
+CONFIG_V4L_USB_DRIVERS=y
|
|
+# CONFIG_USB_VICAM is not set
|
|
+# CONFIG_USB_IBMCAM is not set
|
|
+# CONFIG_USB_KONICAWC is not set
|
|
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
|
|
+# CONFIG_USB_ET61X251 is not set
|
|
+# CONFIG_USB_OV511 is not set
|
|
+# CONFIG_USB_SE401 is not set
|
|
+# CONFIG_USB_SN9C102 is not set
|
|
+# CONFIG_USB_STV680 is not set
|
|
+# CONFIG_USB_ZC0301 is not set
|
|
+# CONFIG_USB_PWC is not set
|
|
+# CONFIG_USB_ZR364XX is not set
|
|
+CONFIG_RADIO_ADAPTERS=y
|
|
+# CONFIG_USB_DSBR is not set
|
|
+# CONFIG_DVB_CORE is not set
|
|
+# CONFIG_DAB is not set
|
|
+
|
|
+#
|
|
+# Graphics support
|
|
+#
|
|
+# CONFIG_VGASTATE is not set
|
|
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
|
+CONFIG_FB=y
|
|
+# CONFIG_FIRMWARE_EDID is not set
|
|
+# CONFIG_FB_DDC is not set
|
|
+CONFIG_FB_CFB_FILLRECT=y
|
|
+CONFIG_FB_CFB_COPYAREA=y
|
|
+CONFIG_FB_CFB_IMAGEBLIT=y
|
|
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
|
|
+# CONFIG_FB_SYS_FILLRECT is not set
|
|
+# CONFIG_FB_SYS_COPYAREA is not set
|
|
+# CONFIG_FB_SYS_IMAGEBLIT is not set
|
|
+# CONFIG_FB_SYS_FOPS is not set
|
|
+CONFIG_FB_DEFERRED_IO=y
|
|
+# CONFIG_FB_SVGALIB is not set
|
|
+# CONFIG_FB_MACMODES is not set
|
|
+# CONFIG_FB_BACKLIGHT is not set
|
|
+# CONFIG_FB_MODE_HELPERS is not set
|
|
+# CONFIG_FB_TILEBLITTING is not set
|
|
+
|
|
+#
|
|
+# Frame buffer hardware drivers
|
|
+#
|
|
+CONFIG_FB_JZSOC=y
|
|
+# CONFIG_FB_JZ4740_SLCD is not set
|
|
+CONFIG_FB_JZLCD_4730_4740=y
|
|
+CONFIG_JZLCD_FRAMEBUFFER_MAX=1
|
|
+# CONFIG_JZLCD_FRAMEBUFFER_ROTATE_SUPPORT is not set
|
|
+# CONFIG_JZLCD_SHARP_LQ035Q7 is not set
|
|
+# CONFIG_JZLCD_SAMSUNG_LTS350Q1 is not set
|
|
+# CONFIG_JZLCD_SAMSUNG_LTV350QVF04 is not set
|
|
+# CONFIG_JZLCD_SAMSUNG_LTP400WQF01 is not set
|
|
+CONFIG_JZLCD_SAMSUNG_LTP400WQF02=y
|
|
+# CONFIG_JZLCD_AUO_A030FL01_V1 is not set
|
|
+# CONFIG_JZLCD_TRULY_TFTG320240DTSW is not set
|
|
+# CONFIG_JZLCD_TRULY_TFTG320240DTSW_SERIAL is not set
|
|
+# CONFIG_JZLCD_TRULY_TFTG240320UTSW_63W_E is not set
|
|
+# CONFIG_JZLCD_FOXCONN_PT035TN01 is not set
|
|
+# CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL is not set
|
|
+# CONFIG_JZLCD_TOSHIBA_LTM084P363 is not set
|
|
+# CONFIG_JZLCD_HYNIX_HT10X21 is not set
|
|
+# CONFIG_JZLCD_INNOLUX_AT080TN42 is not set
|
|
+# CONFIG_JZLCD_CSTN_800x600 is not set
|
|
+# CONFIG_JZLCD_CSTN_320x240 is not set
|
|
+# CONFIG_JZLCD_MSTN_480x320 is not set
|
|
+# CONFIG_JZLCD_MSTN_320x240 is not set
|
|
+# CONFIG_JZLCD_MSTN_240x128 is not set
|
|
+# CONFIG_FB_S1D13XXX is not set
|
|
+# CONFIG_FB_VIRTUAL is not set
|
|
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Display device support
|
|
+#
|
|
+# CONFIG_DISPLAY_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Console display driver support
|
|
+#
|
|
+# CONFIG_VGA_CONSOLE is not set
|
|
+CONFIG_DUMMY_CONSOLE=y
|
|
+CONFIG_FRAMEBUFFER_CONSOLE=y
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE_CURSOR_FLASH is not set
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
|
|
+CONFIG_FONTS=y
|
|
+CONFIG_FONT_8x8=y
|
|
+CONFIG_FONT_8x16=y
|
|
+# CONFIG_FONT_6x11 is not set
|
|
+# CONFIG_FONT_7x14 is not set
|
|
+# CONFIG_FONT_PEARL_8x8 is not set
|
|
+# CONFIG_FONT_ACORN_8x8 is not set
|
|
+# CONFIG_FONT_MINI_4x6 is not set
|
|
+# CONFIG_FONT_SUN8x16 is not set
|
|
+# CONFIG_FONT_SUN12x22 is not set
|
|
+# CONFIG_FONT_10x18 is not set
|
|
+CONFIG_LOGO=y
|
|
+CONFIG_LOGO_LINUX_MONO=y
|
|
+CONFIG_LOGO_LINUX_VGA16=y
|
|
+CONFIG_LOGO_LINUX_CLUT224=y
|
|
+
|
|
+#
|
|
+# Sound
|
|
+#
|
|
+CONFIG_SOUND=y
|
|
+
|
|
+#
|
|
+# Advanced Linux Sound Architecture
|
|
+#
|
|
+# CONFIG_SND is not set
|
|
+
|
|
+#
|
|
+# Open Sound System
|
|
+#
|
|
+CONFIG_SOUND_PRIME=y
|
|
+CONFIG_OSS_OBSOLETE=y
|
|
+# CONFIG_SOUND_JZ_AC97 is not set
|
|
+CONFIG_SOUND_JZ_I2S=y
|
|
+# CONFIG_SOUND_JZ_PCM is not set
|
|
+# CONFIG_I2S_AK4642EN is not set
|
|
+CONFIG_I2S_ICODEC=y
|
|
+# CONFIG_SOUND_MSNDCLAS is not set
|
|
+# CONFIG_SOUND_MSNDPIN is not set
|
|
+CONFIG_HID_SUPPORT=y
|
|
+CONFIG_HID=y
|
|
+# CONFIG_HID_DEBUG is not set
|
|
+# CONFIG_HIDRAW is not set
|
|
+
|
|
+#
|
|
+# USB Input Devices
|
|
+#
|
|
+CONFIG_USB_HID=y
|
|
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
|
|
+# CONFIG_HID_FF is not set
|
|
+# CONFIG_USB_HIDDEV is not set
|
|
+CONFIG_USB_SUPPORT=y
|
|
+CONFIG_USB_ARCH_HAS_HCD=y
|
|
+CONFIG_USB_ARCH_HAS_OHCI=y
|
|
+# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
+CONFIG_USB=y
|
|
+# CONFIG_USB_DEBUG is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous USB options
|
|
+#
|
|
+# CONFIG_USB_DEVICEFS is not set
|
|
+CONFIG_USB_DEVICE_CLASS=y
|
|
+# CONFIG_USB_DYNAMIC_MINORS is not set
|
|
+# CONFIG_USB_SUSPEND is not set
|
|
+# CONFIG_USB_PERSIST is not set
|
|
+# CONFIG_USB_OTG is not set
|
|
+
|
|
+#
|
|
+# USB Host Controller Drivers
|
|
+#
|
|
+# CONFIG_USB_ISP116X_HCD is not set
|
|
+CONFIG_USB_OHCI_HCD=y
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
|
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
|
+# CONFIG_USB_SL811_HCD is not set
|
|
+# CONFIG_USB_R8A66597_HCD is not set
|
|
+
|
|
+#
|
|
+# USB Device Class drivers
|
|
+#
|
|
+# CONFIG_USB_ACM is not set
|
|
+# CONFIG_USB_PRINTER is not set
|
|
+
|
|
+#
|
|
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
+#
|
|
+
|
|
+#
|
|
+# may also be needed; see USB_STORAGE Help for more information
|
|
+#
|
|
+CONFIG_USB_STORAGE=y
|
|
+# CONFIG_USB_STORAGE_DEBUG is not set
|
|
+# CONFIG_USB_STORAGE_DATAFAB is not set
|
|
+# CONFIG_USB_STORAGE_FREECOM is not set
|
|
+# CONFIG_USB_STORAGE_ISD200 is not set
|
|
+# CONFIG_USB_STORAGE_DPCM is not set
|
|
+# CONFIG_USB_STORAGE_USBAT is not set
|
|
+# CONFIG_USB_STORAGE_SDDR09 is not set
|
|
+# CONFIG_USB_STORAGE_SDDR55 is not set
|
|
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
|
|
+# CONFIG_USB_STORAGE_ALAUDA is not set
|
|
+# CONFIG_USB_STORAGE_KARMA is not set
|
|
+# CONFIG_USB_LIBUSUAL is not set
|
|
+
|
|
+#
|
|
+# USB Imaging devices
|
|
+#
|
|
+# CONFIG_USB_MDC800 is not set
|
|
+# CONFIG_USB_MICROTEK is not set
|
|
+CONFIG_USB_MON=y
|
|
+
|
|
+#
|
|
+# USB port drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Serial Converter support
|
|
+#
|
|
+# CONFIG_USB_SERIAL is not set
|
|
+
|
|
+#
|
|
+# USB Miscellaneous drivers
|
|
+#
|
|
+# CONFIG_USB_EMI62 is not set
|
|
+# CONFIG_USB_EMI26 is not set
|
|
+# CONFIG_USB_ADUTUX is not set
|
|
+# CONFIG_USB_AUERSWALD is not set
|
|
+# CONFIG_USB_RIO500 is not set
|
|
+# CONFIG_USB_LEGOTOWER is not set
|
|
+# CONFIG_USB_LCD is not set
|
|
+# CONFIG_USB_BERRY_CHARGE is not set
|
|
+# CONFIG_USB_LED is not set
|
|
+# CONFIG_USB_CYPRESS_CY7C63 is not set
|
|
+# CONFIG_USB_CYTHERM is not set
|
|
+# CONFIG_USB_PHIDGET is not set
|
|
+# CONFIG_USB_IDMOUSE is not set
|
|
+# CONFIG_USB_FTDI_ELAN is not set
|
|
+# CONFIG_USB_APPLEDISPLAY is not set
|
|
+# CONFIG_USB_LD is not set
|
|
+# CONFIG_USB_TRANCEVIBRATOR is not set
|
|
+# CONFIG_USB_IOWARRIOR is not set
|
|
+
|
|
+#
|
|
+# USB DSL modem support
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Gadget Support
|
|
+#
|
|
+CONFIG_USB_GADGET=m
|
|
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
|
+# CONFIG_USB_GADGET_DEBUG_FS is not set
|
|
+CONFIG_USB_GADGET_SELECTED=y
|
|
+CONFIG_USB_GADGET_JZ4740=y
|
|
+CONFIG_USB_JZ4740=m
|
|
+# CONFIG_USB_GADGET_JZ4730 is not set
|
|
+# CONFIG_USB_GADGET_AMD5536UDC is not set
|
|
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
|
|
+# CONFIG_USB_GADGET_FSL_USB2 is not set
|
|
+# CONFIG_USB_GADGET_NET2280 is not set
|
|
+# CONFIG_USB_GADGET_PXA2XX is not set
|
|
+# CONFIG_USB_GADGET_M66592 is not set
|
|
+# CONFIG_USB_GADGET_GOKU is not set
|
|
+# CONFIG_USB_GADGET_LH7A40X is not set
|
|
+# CONFIG_USB_GADGET_OMAP is not set
|
|
+# CONFIG_USB_GADGET_S3C2410 is not set
|
|
+# CONFIG_USB_GADGET_AT91 is not set
|
|
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
|
|
+CONFIG_USB_GADGET_DUALSPEED=y
|
|
+# CONFIG_USB_ZERO is not set
|
|
+# CONFIG_USB_ETH is not set
|
|
+# CONFIG_USB_GADGETFS is not set
|
|
+CONFIG_USB_FILE_STORAGE=m
|
|
+# CONFIG_USB_FILE_STORAGE_TEST is not set
|
|
+# CONFIG_USB_G_SERIAL is not set
|
|
+# CONFIG_USB_MIDI_GADGET is not set
|
|
+CONFIG_MMC=y
|
|
+# CONFIG_MMC_DEBUG is not set
|
|
+# CONFIG_MMC_UNSAFE_RESUME is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Card Drivers
|
|
+#
|
|
+CONFIG_MMC_BLOCK=y
|
|
+CONFIG_MMC_BLOCK_BOUNCE=y
|
|
+# CONFIG_SDIO_UART is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Host Controller Drivers
|
|
+#
|
|
+CONFIG_MMC_JZ=y
|
|
+# CONFIG_JZ_MMC_BUS_4 is not set
|
|
+CONFIG_JZ_MMC_BUS_1=y
|
|
+# CONFIG_NEW_LEDS is not set
|
|
+CONFIG_RTC_LIB=y
|
|
+# CONFIG_RTC_CLASS is not set
|
|
+
|
|
+#
|
|
+# Userspace I/O
|
|
+#
|
|
+# CONFIG_UIO is not set
|
|
+
|
|
+#
|
|
+# File systems
|
|
+#
|
|
+CONFIG_EXT2_FS=y
|
|
+CONFIG_EXT2_FS_XATTR=y
|
|
+# CONFIG_EXT2_FS_POSIX_ACL is not set
|
|
+# CONFIG_EXT2_FS_SECURITY is not set
|
|
+# CONFIG_EXT2_FS_XIP is not set
|
|
+# CONFIG_EXT3_FS is not set
|
|
+# CONFIG_EXT4DEV_FS is not set
|
|
+CONFIG_FS_MBCACHE=y
|
|
+# CONFIG_REISERFS_FS is not set
|
|
+# CONFIG_JFS_FS is not set
|
|
+CONFIG_FS_POSIX_ACL=y
|
|
+# CONFIG_XFS_FS is not set
|
|
+# CONFIG_GFS2_FS is not set
|
|
+# CONFIG_OCFS2_FS is not set
|
|
+CONFIG_MINIX_FS=y
|
|
+# CONFIG_ROMFS_FS is not set
|
|
+CONFIG_INOTIFY=y
|
|
+CONFIG_INOTIFY_USER=y
|
|
+# CONFIG_QUOTA is not set
|
|
+CONFIG_DNOTIFY=y
|
|
+# CONFIG_AUTOFS_FS is not set
|
|
+# CONFIG_AUTOFS4_FS is not set
|
|
+# CONFIG_FUSE_FS is not set
|
|
+
|
|
+#
|
|
+# CD-ROM/DVD Filesystems
|
|
+#
|
|
+# CONFIG_ISO9660_FS is not set
|
|
+# CONFIG_UDF_FS is not set
|
|
+
|
|
+#
|
|
+# DOS/FAT/NT Filesystems
|
|
+#
|
|
+CONFIG_FAT_FS=y
|
|
+CONFIG_MSDOS_FS=y
|
|
+CONFIG_VFAT_FS=y
|
|
+CONFIG_FAT_DEFAULT_CODEPAGE=437
|
|
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
|
+# CONFIG_NTFS_FS is not set
|
|
+
|
|
+#
|
|
+# Pseudo filesystems
|
|
+#
|
|
+CONFIG_PROC_FS=y
|
|
+CONFIG_PROC_KCORE=y
|
|
+CONFIG_PROC_SYSCTL=y
|
|
+CONFIG_SYSFS=y
|
|
+CONFIG_TMPFS=y
|
|
+# CONFIG_TMPFS_POSIX_ACL is not set
|
|
+# CONFIG_HUGETLB_PAGE is not set
|
|
+# CONFIG_CONFIGFS_FS is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous filesystems
|
|
+#
|
|
+# CONFIG_ADFS_FS is not set
|
|
+# CONFIG_AFFS_FS is not set
|
|
+# CONFIG_HFS_FS is not set
|
|
+# CONFIG_HFSPLUS_FS is not set
|
|
+# CONFIG_BEFS_FS is not set
|
|
+# CONFIG_BFS_FS is not set
|
|
+# CONFIG_EFS_FS is not set
|
|
+# CONFIG_JFFS2_FS is not set
|
|
+CONFIG_UBIFS_FS=m
|
|
+# CONFIG_UBIFS_FS_XATTR is not set
|
|
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
|
|
+CONFIG_UBIFS_FS_LZO=y
|
|
+CONFIG_UBIFS_FS_ZLIB=y
|
|
+# CONFIG_UBIFS_FS_DEBUG is not set
|
|
+# CONFIG_CRAMFS is not set
|
|
+# CONFIG_VXFS_FS is not set
|
|
+# CONFIG_HPFS_FS is not set
|
|
+# CONFIG_QNX4FS_FS is not set
|
|
+# CONFIG_SYSV_FS is not set
|
|
+# CONFIG_UFS_FS is not set
|
|
+CONFIG_NETWORK_FILESYSTEMS=y
|
|
+CONFIG_NFS_FS=y
|
|
+CONFIG_NFS_V3=y
|
|
+CONFIG_NFS_V3_ACL=y
|
|
+CONFIG_NFS_V4=y
|
|
+CONFIG_NFS_DIRECTIO=y
|
|
+# CONFIG_NFSD is not set
|
|
+CONFIG_ROOT_NFS=y
|
|
+CONFIG_LOCKD=y
|
|
+CONFIG_LOCKD_V4=y
|
|
+CONFIG_NFS_ACL_SUPPORT=y
|
|
+CONFIG_NFS_COMMON=y
|
|
+CONFIG_SUNRPC=y
|
|
+CONFIG_SUNRPC_GSS=y
|
|
+# CONFIG_SUNRPC_BIND34 is not set
|
|
+CONFIG_RPCSEC_GSS_KRB5=y
|
|
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
|
+# CONFIG_SMB_FS is not set
|
|
+# CONFIG_CIFS is not set
|
|
+# CONFIG_NCP_FS is not set
|
|
+# CONFIG_CODA_FS is not set
|
|
+# CONFIG_AFS_FS is not set
|
|
+
|
|
+#
|
|
+# Partition Types
|
|
+#
|
|
+CONFIG_PARTITION_ADVANCED=y
|
|
+# CONFIG_ACORN_PARTITION is not set
|
|
+# CONFIG_OSF_PARTITION is not set
|
|
+# CONFIG_AMIGA_PARTITION is not set
|
|
+# CONFIG_ATARI_PARTITION is not set
|
|
+# CONFIG_MAC_PARTITION is not set
|
|
+CONFIG_MSDOS_PARTITION=y
|
|
+# CONFIG_BSD_DISKLABEL is not set
|
|
+# CONFIG_MINIX_SUBPARTITION is not set
|
|
+# CONFIG_SOLARIS_X86_PARTITION is not set
|
|
+# CONFIG_UNIXWARE_DISKLABEL is not set
|
|
+# CONFIG_LDM_PARTITION is not set
|
|
+# CONFIG_SGI_PARTITION is not set
|
|
+# CONFIG_ULTRIX_PARTITION is not set
|
|
+# CONFIG_SUN_PARTITION is not set
|
|
+# CONFIG_KARMA_PARTITION is not set
|
|
+# CONFIG_EFI_PARTITION is not set
|
|
+# CONFIG_SYSV68_PARTITION is not set
|
|
+CONFIG_NLS=y
|
|
+CONFIG_NLS_DEFAULT="iso8859-1"
|
|
+CONFIG_NLS_CODEPAGE_437=y
|
|
+# CONFIG_NLS_CODEPAGE_737 is not set
|
|
+# CONFIG_NLS_CODEPAGE_775 is not set
|
|
+# CONFIG_NLS_CODEPAGE_850 is not set
|
|
+# CONFIG_NLS_CODEPAGE_852 is not set
|
|
+# CONFIG_NLS_CODEPAGE_855 is not set
|
|
+# CONFIG_NLS_CODEPAGE_857 is not set
|
|
+# CONFIG_NLS_CODEPAGE_860 is not set
|
|
+# CONFIG_NLS_CODEPAGE_861 is not set
|
|
+# CONFIG_NLS_CODEPAGE_862 is not set
|
|
+# CONFIG_NLS_CODEPAGE_863 is not set
|
|
+# CONFIG_NLS_CODEPAGE_864 is not set
|
|
+# CONFIG_NLS_CODEPAGE_865 is not set
|
|
+# CONFIG_NLS_CODEPAGE_866 is not set
|
|
+# CONFIG_NLS_CODEPAGE_869 is not set
|
|
+CONFIG_NLS_CODEPAGE_936=y
|
|
+# CONFIG_NLS_CODEPAGE_950 is not set
|
|
+# CONFIG_NLS_CODEPAGE_932 is not set
|
|
+# CONFIG_NLS_CODEPAGE_949 is not set
|
|
+# CONFIG_NLS_CODEPAGE_874 is not set
|
|
+# CONFIG_NLS_ISO8859_8 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1250 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1251 is not set
|
|
+CONFIG_NLS_ASCII=y
|
|
+CONFIG_NLS_ISO8859_1=y
|
|
+# CONFIG_NLS_ISO8859_2 is not set
|
|
+# CONFIG_NLS_ISO8859_3 is not set
|
|
+# CONFIG_NLS_ISO8859_4 is not set
|
|
+# CONFIG_NLS_ISO8859_5 is not set
|
|
+# CONFIG_NLS_ISO8859_6 is not set
|
|
+# CONFIG_NLS_ISO8859_7 is not set
|
|
+# CONFIG_NLS_ISO8859_9 is not set
|
|
+# CONFIG_NLS_ISO8859_13 is not set
|
|
+# CONFIG_NLS_ISO8859_14 is not set
|
|
+# CONFIG_NLS_ISO8859_15 is not set
|
|
+# CONFIG_NLS_KOI8_R is not set
|
|
+# CONFIG_NLS_KOI8_U is not set
|
|
+# CONFIG_NLS_UTF8 is not set
|
|
+# CONFIG_DLM is not set
|
|
+
|
|
+#
|
|
+# Yaffs2 Filesystems
|
|
+#
|
|
+CONFIG_YAFFS_FS=y
|
|
+CONFIG_YAFFS_YAFFS1=y
|
|
+# CONFIG_YAFFS_DOES_ECC is not set
|
|
+CONFIG_YAFFS_YAFFS2=y
|
|
+CONFIG_YAFFS_AUTO_YAFFS2=y
|
|
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
|
|
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
|
|
+CONFIG_YAFFS_DISABLE_CHUNK_ERASED_CHECK=y
|
|
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
|
|
+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
|
|
+CONFIG_INSTRUMENTATION=y
|
|
+# CONFIG_PROFILING is not set
|
|
+# CONFIG_MARKERS is not set
|
|
+
|
|
+#
|
|
+# Kernel hacking
|
|
+#
|
|
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
+# CONFIG_PRINTK_TIME is not set
|
|
+CONFIG_ENABLE_WARN_DEPRECATED=y
|
|
+CONFIG_ENABLE_MUST_CHECK=y
|
|
+CONFIG_MAGIC_SYSRQ=y
|
|
+# CONFIG_UNUSED_SYMBOLS is not set
|
|
+CONFIG_DEBUG_FS=y
|
|
+# CONFIG_HEADERS_CHECK is not set
|
|
+# CONFIG_DEBUG_KERNEL is not set
|
|
+# CONFIG_SAMPLES is not set
|
|
+CONFIG_CMDLINE=""
|
|
+
|
|
+#
|
|
+# Security options
|
|
+#
|
|
+# CONFIG_KEYS is not set
|
|
+# CONFIG_SECURITY is not set
|
|
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
|
+CONFIG_CRYPTO=y
|
|
+CONFIG_CRYPTO_ALGAPI=y
|
|
+CONFIG_CRYPTO_BLKCIPHER=y
|
|
+CONFIG_CRYPTO_MANAGER=y
|
|
+# CONFIG_CRYPTO_HMAC is not set
|
|
+# CONFIG_CRYPTO_XCBC is not set
|
|
+# CONFIG_CRYPTO_NULL is not set
|
|
+# CONFIG_CRYPTO_MD4 is not set
|
|
+CONFIG_CRYPTO_MD5=y
|
|
+# CONFIG_CRYPTO_SHA1 is not set
|
|
+# CONFIG_CRYPTO_SHA256 is not set
|
|
+# CONFIG_CRYPTO_SHA512 is not set
|
|
+# CONFIG_CRYPTO_WP512 is not set
|
|
+# CONFIG_CRYPTO_TGR192 is not set
|
|
+# CONFIG_CRYPTO_GF128MUL is not set
|
|
+# CONFIG_CRYPTO_ECB is not set
|
|
+CONFIG_CRYPTO_CBC=y
|
|
+# CONFIG_CRYPTO_PCBC is not set
|
|
+# CONFIG_CRYPTO_LRW is not set
|
|
+# CONFIG_CRYPTO_XTS is not set
|
|
+# CONFIG_CRYPTO_CRYPTD is not set
|
|
+CONFIG_CRYPTO_DES=y
|
|
+# CONFIG_CRYPTO_FCRYPT is not set
|
|
+# CONFIG_CRYPTO_BLOWFISH is not set
|
|
+# CONFIG_CRYPTO_TWOFISH is not set
|
|
+# CONFIG_CRYPTO_SERPENT is not set
|
|
+# CONFIG_CRYPTO_AES is not set
|
|
+# CONFIG_CRYPTO_CAST5 is not set
|
|
+# CONFIG_CRYPTO_CAST6 is not set
|
|
+# CONFIG_CRYPTO_TEA is not set
|
|
+# CONFIG_CRYPTO_ARC4 is not set
|
|
+# CONFIG_CRYPTO_KHAZAD is not set
|
|
+# CONFIG_CRYPTO_ANUBIS is not set
|
|
+# CONFIG_CRYPTO_SEED is not set
|
|
+CONFIG_CRYPTO_DEFLATE=m
|
|
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
|
|
+# CONFIG_CRYPTO_CRC32C is not set
|
|
+# CONFIG_CRYPTO_CAMELLIA is not set
|
|
+# CONFIG_CRYPTO_TEST is not set
|
|
+# CONFIG_CRYPTO_AUTHENC is not set
|
|
+CONFIG_CRYPTO_LZO=m
|
|
+CONFIG_CRYPTO_HW=y
|
|
+
|
|
+#
|
|
+# Library routines
|
|
+#
|
|
+CONFIG_BITREVERSE=y
|
|
+# CONFIG_CRC_CCITT is not set
|
|
+CONFIG_CRC16=m
|
|
+# CONFIG_CRC_ITU_T is not set
|
|
+CONFIG_CRC32=y
|
|
+# CONFIG_CRC7 is not set
|
|
+# CONFIG_LIBCRC32C is not set
|
|
+CONFIG_ZLIB_INFLATE=m
|
|
+CONFIG_ZLIB_DEFLATE=m
|
|
+CONFIG_LZO_COMPRESS=m
|
|
+CONFIG_LZO_DECOMPRESS=m
|
|
+CONFIG_PLIST=y
|
|
+CONFIG_HAS_IOMEM=y
|
|
+CONFIG_HAS_IOPORT=y
|
|
+CONFIG_HAS_DMA=y
|
|
--- linux-2.6.24.7.old/arch/mips/configs/fuwa_defconfig 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/configs/fuwa_defconfig 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,928 @@
|
|
+#
|
|
+# Automatically generated make config: don't edit
|
|
+# Linux kernel version: 2.6.24.3
|
|
+# Fri Jul 4 19:20:22 2008
|
|
+#
|
|
+CONFIG_MIPS=y
|
|
+
|
|
+#
|
|
+# Machine selection
|
|
+#
|
|
+# CONFIG_JZ4730_PMP is not set
|
|
+# CONFIG_JZ4740_PAVO is not set
|
|
+# CONFIG_JZ4740_LEO is not set
|
|
+# CONFIG_JZ4740_LYRA is not set
|
|
+# CONFIG_JZ4725_DIPPER is not set
|
|
+# CONFIG_JZ4720_VIRGO is not set
|
|
+CONFIG_JZ4750_FUWA=y
|
|
+# CONFIG_MACH_ALCHEMY is not set
|
|
+# CONFIG_BASLER_EXCITE is not set
|
|
+# CONFIG_BCM47XX is not set
|
|
+# CONFIG_MIPS_COBALT is not set
|
|
+# CONFIG_MACH_DECSTATION is not set
|
|
+# CONFIG_MACH_JAZZ is not set
|
|
+# CONFIG_LASAT is not set
|
|
+# CONFIG_LEMOTE_FULONG is not set
|
|
+# CONFIG_MIPS_ATLAS is not set
|
|
+# CONFIG_MIPS_MALTA is not set
|
|
+# CONFIG_MIPS_SEAD is not set
|
|
+# CONFIG_MIPS_SIM is not set
|
|
+# CONFIG_MARKEINS is not set
|
|
+# CONFIG_MACH_VR41XX is not set
|
|
+# CONFIG_PNX8550_JBS is not set
|
|
+# CONFIG_PNX8550_STB810 is not set
|
|
+# CONFIG_PMC_MSP is not set
|
|
+# CONFIG_PMC_YOSEMITE is not set
|
|
+# CONFIG_QEMU is not set
|
|
+# CONFIG_SGI_IP22 is not set
|
|
+# CONFIG_SGI_IP27 is not set
|
|
+# CONFIG_SGI_IP32 is not set
|
|
+# CONFIG_SIBYTE_CRHINE is not set
|
|
+# CONFIG_SIBYTE_CARMEL is not set
|
|
+# CONFIG_SIBYTE_CRHONE is not set
|
|
+# CONFIG_SIBYTE_RHONE is not set
|
|
+# CONFIG_SIBYTE_SWARM is not set
|
|
+# CONFIG_SIBYTE_LITTLESUR is not set
|
|
+# CONFIG_SIBYTE_SENTOSA is not set
|
|
+# CONFIG_SIBYTE_PTSWARM is not set
|
|
+# CONFIG_SIBYTE_BIGSUR is not set
|
|
+# CONFIG_SNI_RM is not set
|
|
+# CONFIG_TOSHIBA_JMR3927 is not set
|
|
+# CONFIG_TOSHIBA_RBTX4927 is not set
|
|
+# CONFIG_TOSHIBA_RBTX4938 is not set
|
|
+# CONFIG_WR_PPMC is not set
|
|
+CONFIG_SOC_JZ4750=y
|
|
+CONFIG_JZ_FPGA=y
|
|
+CONFIG_JZSOC=y
|
|
+CONFIG_JZRISC=y
|
|
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
|
+CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|
+CONFIG_GENERIC_HWEIGHT=y
|
|
+CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
+CONFIG_GENERIC_CLOCKEVENTS=y
|
|
+CONFIG_GENERIC_TIME=y
|
|
+CONFIG_GENERIC_CMOS_UPDATE=y
|
|
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
|
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
|
|
+CONFIG_DMA_NONCOHERENT=y
|
|
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
|
+# CONFIG_HOTPLUG_CPU is not set
|
|
+# CONFIG_NO_IOPORT is not set
|
|
+# CONFIG_CPU_BIG_ENDIAN is not set
|
|
+CONFIG_CPU_LITTLE_ENDIAN=y
|
|
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
|
+CONFIG_MIPS_L1_CACHE_SHIFT=5
|
|
+
|
|
+#
|
|
+# CPU selection
|
|
+#
|
|
+# CONFIG_CPU_LOONGSON2 is not set
|
|
+CONFIG_CPU_MIPS32_R1=y
|
|
+# CONFIG_CPU_MIPS32_R2 is not set
|
|
+# CONFIG_CPU_MIPS64_R1 is not set
|
|
+# CONFIG_CPU_MIPS64_R2 is not set
|
|
+# CONFIG_CPU_R3000 is not set
|
|
+# CONFIG_CPU_TX39XX is not set
|
|
+# CONFIG_CPU_VR41XX is not set
|
|
+# CONFIG_CPU_R4300 is not set
|
|
+# CONFIG_CPU_R4X00 is not set
|
|
+# CONFIG_CPU_TX49XX is not set
|
|
+# CONFIG_CPU_R5000 is not set
|
|
+# CONFIG_CPU_R5432 is not set
|
|
+# CONFIG_CPU_R6000 is not set
|
|
+# CONFIG_CPU_NEVADA is not set
|
|
+# CONFIG_CPU_R8000 is not set
|
|
+# CONFIG_CPU_R10000 is not set
|
|
+# CONFIG_CPU_RM7000 is not set
|
|
+# CONFIG_CPU_RM9000 is not set
|
|
+# CONFIG_CPU_SB1 is not set
|
|
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
|
+CONFIG_CPU_MIPS32=y
|
|
+CONFIG_CPU_MIPSR1=y
|
|
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
|
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
|
+
|
|
+#
|
|
+# Kernel type
|
|
+#
|
|
+CONFIG_32BIT=y
|
|
+# CONFIG_64BIT is not set
|
|
+CONFIG_PAGE_SIZE_4KB=y
|
|
+# CONFIG_PAGE_SIZE_8KB is not set
|
|
+# CONFIG_PAGE_SIZE_16KB is not set
|
|
+# CONFIG_PAGE_SIZE_64KB is not set
|
|
+CONFIG_CPU_HAS_PREFETCH=y
|
|
+CONFIG_MIPS_MT_DISABLED=y
|
|
+# CONFIG_MIPS_MT_SMP is not set
|
|
+# CONFIG_MIPS_MT_SMTC is not set
|
|
+CONFIG_CPU_HAS_LLSC=y
|
|
+CONFIG_CPU_HAS_SYNC=y
|
|
+CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_GENERIC_IRQ_PROBE=y
|
|
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
|
+CONFIG_ARCH_FLATMEM_ENABLE=y
|
|
+CONFIG_ARCH_POPULATES_NODE_MAP=y
|
|
+CONFIG_SELECT_MEMORY_MODEL=y
|
|
+CONFIG_FLATMEM_MANUAL=y
|
|
+# CONFIG_DISCONTIGMEM_MANUAL is not set
|
|
+# CONFIG_SPARSEMEM_MANUAL is not set
|
|
+CONFIG_FLATMEM=y
|
|
+CONFIG_FLAT_NODE_MEM_MAP=y
|
|
+# CONFIG_SPARSEMEM_STATIC is not set
|
|
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
|
+CONFIG_SPLIT_PTLOCK_CPUS=4
|
|
+# CONFIG_RESOURCES_64BIT is not set
|
|
+CONFIG_ZONE_DMA_FLAG=0
|
|
+CONFIG_VIRT_TO_BUS=y
|
|
+# CONFIG_TICK_ONESHOT is not set
|
|
+# CONFIG_NO_HZ is not set
|
|
+# CONFIG_HIGH_RES_TIMERS is not set
|
|
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
+# CONFIG_HZ_48 is not set
|
|
+CONFIG_HZ_100=y
|
|
+# CONFIG_HZ_128 is not set
|
|
+# CONFIG_HZ_250 is not set
|
|
+# CONFIG_HZ_256 is not set
|
|
+# CONFIG_HZ_1000 is not set
|
|
+# CONFIG_HZ_1024 is not set
|
|
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
|
+CONFIG_HZ=100
|
|
+# CONFIG_PREEMPT_NONE is not set
|
|
+# CONFIG_PREEMPT_VOLUNTARY is not set
|
|
+CONFIG_PREEMPT=y
|
|
+CONFIG_PREEMPT_BKL=y
|
|
+# CONFIG_KEXEC is not set
|
|
+CONFIG_SECCOMP=y
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
+
|
|
+#
|
|
+# General setup
|
|
+#
|
|
+CONFIG_EXPERIMENTAL=y
|
|
+CONFIG_BROKEN_ON_SMP=y
|
|
+CONFIG_LOCK_KERNEL=y
|
|
+CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
+CONFIG_LOCALVERSION=""
|
|
+CONFIG_LOCALVERSION_AUTO=y
|
|
+CONFIG_SWAP=y
|
|
+CONFIG_SYSVIPC=y
|
|
+CONFIG_SYSVIPC_SYSCTL=y
|
|
+# CONFIG_POSIX_MQUEUE is not set
|
|
+# CONFIG_BSD_PROCESS_ACCT is not set
|
|
+# CONFIG_TASKSTATS is not set
|
|
+# CONFIG_USER_NS is not set
|
|
+# CONFIG_PID_NS is not set
|
|
+# CONFIG_AUDIT is not set
|
|
+# CONFIG_IKCONFIG is not set
|
|
+CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_CGROUPS is not set
|
|
+CONFIG_FAIR_GROUP_SCHED=y
|
|
+CONFIG_FAIR_USER_SCHED=y
|
|
+# CONFIG_FAIR_CGROUP_SCHED is not set
|
|
+CONFIG_SYSFS_DEPRECATED=y
|
|
+CONFIG_RELAY=y
|
|
+# CONFIG_BLK_DEV_INITRD is not set
|
|
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
|
+CONFIG_SYSCTL=y
|
|
+CONFIG_EMBEDDED=y
|
|
+CONFIG_SYSCTL_SYSCALL=y
|
|
+CONFIG_KALLSYMS=y
|
|
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
|
+CONFIG_HOTPLUG=y
|
|
+CONFIG_PRINTK=y
|
|
+CONFIG_BUG=y
|
|
+CONFIG_ELF_CORE=y
|
|
+CONFIG_BASE_FULL=y
|
|
+CONFIG_FUTEX=y
|
|
+CONFIG_ANON_INODES=y
|
|
+CONFIG_EPOLL=y
|
|
+CONFIG_SIGNALFD=y
|
|
+CONFIG_EVENTFD=y
|
|
+CONFIG_SHMEM=y
|
|
+CONFIG_VM_EVENT_COUNTERS=y
|
|
+CONFIG_SLAB=y
|
|
+# CONFIG_SLUB is not set
|
|
+# CONFIG_SLOB is not set
|
|
+CONFIG_SLABINFO=y
|
|
+CONFIG_RT_MUTEXES=y
|
|
+# CONFIG_TINY_SHMEM is not set
|
|
+CONFIG_BASE_SMALL=0
|
|
+CONFIG_MODULES=y
|
|
+CONFIG_MODULE_UNLOAD=y
|
|
+# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
+CONFIG_MODVERSIONS=y
|
|
+CONFIG_MODULE_SRCVERSION_ALL=y
|
|
+CONFIG_KMOD=y
|
|
+CONFIG_BLOCK=y
|
|
+# CONFIG_LBD is not set
|
|
+# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
+# CONFIG_LSF is not set
|
|
+# CONFIG_BLK_DEV_BSG is not set
|
|
+
|
|
+#
|
|
+# IO Schedulers
|
|
+#
|
|
+CONFIG_IOSCHED_NOOP=y
|
|
+CONFIG_IOSCHED_AS=y
|
|
+CONFIG_IOSCHED_DEADLINE=y
|
|
+CONFIG_IOSCHED_CFQ=y
|
|
+CONFIG_DEFAULT_AS=y
|
|
+# CONFIG_DEFAULT_DEADLINE is not set
|
|
+# CONFIG_DEFAULT_CFQ is not set
|
|
+# CONFIG_DEFAULT_NOOP is not set
|
|
+CONFIG_DEFAULT_IOSCHED="anticipatory"
|
|
+
|
|
+#
|
|
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
|
|
+#
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
+CONFIG_MMU=y
|
|
+# CONFIG_PCCARD is not set
|
|
+
|
|
+#
|
|
+# Executable file formats
|
|
+#
|
|
+CONFIG_BINFMT_ELF=y
|
|
+# CONFIG_BINFMT_MISC is not set
|
|
+CONFIG_TRAD_SIGNALS=y
|
|
+
|
|
+#
|
|
+# CPU Frequency scaling
|
|
+#
|
|
+# CONFIG_CPU_FREQ_JZ is not set
|
|
+
|
|
+#
|
|
+# Power management options
|
|
+#
|
|
+# CONFIG_PM is not set
|
|
+CONFIG_SUSPEND_UP_POSSIBLE=y
|
|
+
|
|
+#
|
|
+# Networking
|
|
+#
|
|
+CONFIG_NET=y
|
|
+
|
|
+#
|
|
+# Networking options
|
|
+#
|
|
+CONFIG_PACKET=y
|
|
+# CONFIG_PACKET_MMAP is not set
|
|
+CONFIG_UNIX=y
|
|
+# CONFIG_NET_KEY is not set
|
|
+CONFIG_INET=y
|
|
+# CONFIG_IP_MULTICAST is not set
|
|
+# CONFIG_IP_ADVANCED_ROUTER is not set
|
|
+CONFIG_IP_FIB_HASH=y
|
|
+CONFIG_IP_PNP=y
|
|
+CONFIG_IP_PNP_DHCP=y
|
|
+CONFIG_IP_PNP_BOOTP=y
|
|
+# CONFIG_IP_PNP_RARP is not set
|
|
+# CONFIG_NET_IPIP is not set
|
|
+# CONFIG_NET_IPGRE is not set
|
|
+# CONFIG_ARPD is not set
|
|
+# CONFIG_SYN_COOKIES is not set
|
|
+# CONFIG_INET_AH is not set
|
|
+# CONFIG_INET_ESP is not set
|
|
+# CONFIG_INET_IPCOMP is not set
|
|
+# CONFIG_INET_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
|
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_BEET is not set
|
|
+# CONFIG_INET_LRO is not set
|
|
+CONFIG_INET_DIAG=m
|
|
+CONFIG_INET_TCP_DIAG=m
|
|
+# CONFIG_TCP_CONG_ADVANCED is not set
|
|
+CONFIG_TCP_CONG_CUBIC=y
|
|
+CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
+# CONFIG_TCP_MD5SIG is not set
|
|
+# CONFIG_IPV6 is not set
|
|
+# CONFIG_INET6_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET6_TUNNEL is not set
|
|
+# CONFIG_NETWORK_SECMARK is not set
|
|
+# CONFIG_NETFILTER is not set
|
|
+# CONFIG_IP_DCCP is not set
|
|
+# CONFIG_IP_SCTP is not set
|
|
+# CONFIG_TIPC is not set
|
|
+# CONFIG_ATM is not set
|
|
+# CONFIG_BRIDGE is not set
|
|
+# CONFIG_VLAN_8021Q is not set
|
|
+# CONFIG_DECNET is not set
|
|
+# CONFIG_LLC2 is not set
|
|
+# CONFIG_IPX is not set
|
|
+# CONFIG_ATALK is not set
|
|
+# CONFIG_X25 is not set
|
|
+# CONFIG_LAPB is not set
|
|
+# CONFIG_ECONET is not set
|
|
+# CONFIG_WAN_ROUTER is not set
|
|
+# CONFIG_NET_SCHED is not set
|
|
+
|
|
+#
|
|
+# Network testing
|
|
+#
|
|
+# CONFIG_NET_PKTGEN is not set
|
|
+# CONFIG_HAMRADIO is not set
|
|
+# CONFIG_IRDA is not set
|
|
+# CONFIG_BT is not set
|
|
+# CONFIG_AF_RXRPC is not set
|
|
+
|
|
+#
|
|
+# Wireless
|
|
+#
|
|
+# CONFIG_CFG80211 is not set
|
|
+# CONFIG_WIRELESS_EXT is not set
|
|
+# CONFIG_MAC80211 is not set
|
|
+# CONFIG_IEEE80211 is not set
|
|
+# CONFIG_RFKILL is not set
|
|
+# CONFIG_NET_9P is not set
|
|
+
|
|
+#
|
|
+# Device Drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# Generic Driver Options
|
|
+#
|
|
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
+CONFIG_STANDALONE=y
|
|
+CONFIG_PREVENT_FIRMWARE_BUILD=y
|
|
+# CONFIG_FW_LOADER is not set
|
|
+# CONFIG_SYS_HYPERVISOR is not set
|
|
+# CONFIG_CONNECTOR is not set
|
|
+CONFIG_MTD=y
|
|
+# CONFIG_MTD_DEBUG is not set
|
|
+# CONFIG_MTD_CONCAT is not set
|
|
+CONFIG_MTD_PARTITIONS=y
|
|
+# CONFIG_MTD_REDBOOT_PARTS is not set
|
|
+# CONFIG_MTD_CMDLINE_PARTS is not set
|
|
+
|
|
+#
|
|
+# User Modules And Translation Layers
|
|
+#
|
|
+CONFIG_MTD_CHAR=y
|
|
+CONFIG_MTD_BLKDEVS=y
|
|
+CONFIG_MTD_BLOCK=y
|
|
+# CONFIG_FTL is not set
|
|
+# CONFIG_NFTL is not set
|
|
+# CONFIG_INFTL is not set
|
|
+# CONFIG_RFD_FTL is not set
|
|
+# CONFIG_SSFDC is not set
|
|
+# CONFIG_MTD_OOPS is not set
|
|
+
|
|
+#
|
|
+# RAM/ROM/Flash chip drivers
|
|
+#
|
|
+# CONFIG_MTD_CFI is not set
|
|
+# CONFIG_MTD_JEDECPROBE is not set
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
|
+CONFIG_MTD_CFI_I1=y
|
|
+CONFIG_MTD_CFI_I2=y
|
|
+# CONFIG_MTD_CFI_I4 is not set
|
|
+# CONFIG_MTD_CFI_I8 is not set
|
|
+# CONFIG_MTD_RAM is not set
|
|
+# CONFIG_MTD_ROM is not set
|
|
+# CONFIG_MTD_ABSENT is not set
|
|
+
|
|
+#
|
|
+# Mapping drivers for chip access
|
|
+#
|
|
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
|
+# CONFIG_MTD_PLATRAM is not set
|
|
+
|
|
+#
|
|
+# Self-contained MTD device drivers
|
|
+#
|
|
+# CONFIG_MTD_SLRAM is not set
|
|
+# CONFIG_MTD_PHRAM is not set
|
|
+# CONFIG_MTD_MTDRAM is not set
|
|
+# CONFIG_MTD_BLOCK2MTD is not set
|
|
+
|
|
+#
|
|
+# Disk-On-Chip Device Drivers
|
|
+#
|
|
+# CONFIG_MTD_DOC2000 is not set
|
|
+# CONFIG_MTD_DOC2001 is not set
|
|
+# CONFIG_MTD_DOC2001PLUS is not set
|
|
+CONFIG_MTD_NAND=y
|
|
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
|
|
+# CONFIG_MTD_NAND_ECC_SMC is not set
|
|
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
|
|
+CONFIG_MTD_NAND_IDS=y
|
|
+# CONFIG_MTD_NAND_DISKONCHIP is not set
|
|
+# CONFIG_MTD_NAND_NANDSIM is not set
|
|
+# CONFIG_MTD_NAND_PLATFORM is not set
|
|
+CONFIG_MTD_NAND_JZ4750=y
|
|
+# CONFIG_MTD_HW_HM_ECC is not set
|
|
+# CONFIG_MTD_SW_HM_ECC is not set
|
|
+# CONFIG_MTD_HW_RS_ECC is not set
|
|
+CONFIG_MTD_HW_BCH_ECC=y
|
|
+CONFIG_MTD_NAND_DMA=y
|
|
+# CONFIG_MTD_NAND_NO_DMA is not set
|
|
+CONFIG_MTD_HW_BCH_4BIT=y
|
|
+# CONFIG_MTD_HW_BCH_8BIT is not set
|
|
+# CONFIG_MTD_MTDBLOCK_WRITE_VERIFY_ENABLE is not set
|
|
+CONFIG_MTD_OOB_COPIES=0
|
|
+CONFIG_MTD_BADBLOCK_FLAG_PAGE=127
|
|
+# CONFIG_MTD_ONENAND is not set
|
|
+
|
|
+#
|
|
+# UBI - Unsorted block images
|
|
+#
|
|
+# CONFIG_MTD_UBI is not set
|
|
+# CONFIG_MTD_UBI_BLKDEVS is not set
|
|
+# CONFIG_PARPORT is not set
|
|
+# CONFIG_PNP is not set
|
|
+CONFIG_BLK_DEV=y
|
|
+# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
+CONFIG_BLK_DEV_LOOP=y
|
|
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
|
+# CONFIG_BLK_DEV_NBD is not set
|
|
+CONFIG_BLK_DEV_RAM=y
|
|
+CONFIG_BLK_DEV_RAM_COUNT=16
|
|
+CONFIG_BLK_DEV_RAM_SIZE=4096
|
|
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
+# CONFIG_CDROM_PKTCDVD is not set
|
|
+# CONFIG_ATA_OVER_ETH is not set
|
|
+CONFIG_MISC_DEVICES=y
|
|
+# CONFIG_EEPROM_93CX6 is not set
|
|
+# CONFIG_IDE is not set
|
|
+
|
|
+#
|
|
+# SCSI device support
|
|
+#
|
|
+# CONFIG_RAID_ATTRS is not set
|
|
+# CONFIG_SCSI is not set
|
|
+# CONFIG_SCSI_DMA is not set
|
|
+# CONFIG_SCSI_NETLINK is not set
|
|
+# CONFIG_ATA is not set
|
|
+# CONFIG_MD is not set
|
|
+CONFIG_NETDEVICES=y
|
|
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
|
+# CONFIG_DUMMY is not set
|
|
+# CONFIG_BONDING is not set
|
|
+# CONFIG_MACVLAN is not set
|
|
+# CONFIG_EQUALIZER is not set
|
|
+# CONFIG_TUN is not set
|
|
+# CONFIG_VETH is not set
|
|
+CONFIG_PHYLIB=y
|
|
+
|
|
+#
|
|
+# MII PHY device drivers
|
|
+#
|
|
+# CONFIG_MARVELL_PHY is not set
|
|
+# CONFIG_DAVICOM_PHY is not set
|
|
+# CONFIG_QSEMI_PHY is not set
|
|
+# CONFIG_LXT_PHY is not set
|
|
+# CONFIG_CICADA_PHY is not set
|
|
+# CONFIG_VITESSE_PHY is not set
|
|
+# CONFIG_SMSC_PHY is not set
|
|
+# CONFIG_BROADCOM_PHY is not set
|
|
+# CONFIG_ICPLUS_PHY is not set
|
|
+# CONFIG_FIXED_PHY is not set
|
|
+# CONFIG_MDIO_BITBANG is not set
|
|
+CONFIG_NET_ETHERNET=y
|
|
+CONFIG_MII=y
|
|
+CONFIG_JZ_ETH=y
|
|
+# CONFIG_AX88796 is not set
|
|
+# CONFIG_DM9000 is not set
|
|
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_TAH is not set
|
|
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
|
+# CONFIG_B44 is not set
|
|
+CONFIG_NETDEV_1000=y
|
|
+CONFIG_NETDEV_10000=y
|
|
+
|
|
+#
|
|
+# Wireless LAN
|
|
+#
|
|
+# CONFIG_WLAN_PRE80211 is not set
|
|
+# CONFIG_WLAN_80211 is not set
|
|
+# CONFIG_WAN is not set
|
|
+# CONFIG_PPP is not set
|
|
+# CONFIG_SLIP is not set
|
|
+# CONFIG_SHAPER is not set
|
|
+# CONFIG_NETCONSOLE is not set
|
|
+# CONFIG_NETPOLL is not set
|
|
+# CONFIG_NET_POLL_CONTROLLER is not set
|
|
+# CONFIG_ISDN is not set
|
|
+# CONFIG_PHONE is not set
|
|
+
|
|
+#
|
|
+# Input device support
|
|
+#
|
|
+CONFIG_INPUT=y
|
|
+# CONFIG_INPUT_FF_MEMLESS is not set
|
|
+# CONFIG_INPUT_POLLDEV is not set
|
|
+
|
|
+#
|
|
+# Userland interfaces
|
|
+#
|
|
+# CONFIG_INPUT_MOUSEDEV is not set
|
|
+# CONFIG_INPUT_JOYDEV is not set
|
|
+# CONFIG_INPUT_EVDEV is not set
|
|
+# CONFIG_INPUT_EVBUG is not set
|
|
+
|
|
+#
|
|
+# Input Device Drivers
|
|
+#
|
|
+# CONFIG_INPUT_KEYBOARD is not set
|
|
+# CONFIG_INPUT_MOUSE is not set
|
|
+# CONFIG_INPUT_JOYSTICK is not set
|
|
+# CONFIG_INPUT_TABLET is not set
|
|
+# CONFIG_INPUT_TOUCHSCREEN is not set
|
|
+# CONFIG_INPUT_MISC is not set
|
|
+
|
|
+#
|
|
+# Hardware I/O ports
|
|
+#
|
|
+CONFIG_SERIO=y
|
|
+# CONFIG_SERIO_I8042 is not set
|
|
+CONFIG_SERIO_SERPORT=y
|
|
+# CONFIG_SERIO_LIBPS2 is not set
|
|
+# CONFIG_SERIO_RAW is not set
|
|
+# CONFIG_GAMEPORT is not set
|
|
+
|
|
+#
|
|
+# Character devices
|
|
+#
|
|
+CONFIG_VT=y
|
|
+CONFIG_VT_CONSOLE=y
|
|
+CONFIG_HW_CONSOLE=y
|
|
+CONFIG_VT_HW_CONSOLE_BINDING=y
|
|
+# CONFIG_SERIAL_NONSTANDARD is not set
|
|
+
|
|
+#
|
|
+# Serial drivers
|
|
+#
|
|
+CONFIG_SERIAL_8250=y
|
|
+CONFIG_SERIAL_8250_CONSOLE=y
|
|
+CONFIG_SERIAL_8250_NR_UARTS=4
|
|
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
|
|
+# CONFIG_SERIAL_8250_EXTENDED is not set
|
|
+
|
|
+#
|
|
+# Non-8250 serial port support
|
|
+#
|
|
+CONFIG_SERIAL_CORE=y
|
|
+CONFIG_SERIAL_CORE_CONSOLE=y
|
|
+CONFIG_UNIX98_PTYS=y
|
|
+CONFIG_LEGACY_PTYS=y
|
|
+CONFIG_LEGACY_PTY_COUNT=2
|
|
+# CONFIG_IPMI_HANDLER is not set
|
|
+# CONFIG_HW_RANDOM is not set
|
|
+# CONFIG_RTC is not set
|
|
+# CONFIG_RTC_PCF8563 is not set
|
|
+# CONFIG_RTC_JZ is not set
|
|
+# CONFIG_R3964 is not set
|
|
+# CONFIG_RAW_DRIVER is not set
|
|
+# CONFIG_TCG_TPM is not set
|
|
+
|
|
+#
|
|
+# JZSOC char device support
|
|
+#
|
|
+# CONFIG_JZCHAR is not set
|
|
+# CONFIG_I2C is not set
|
|
+
|
|
+#
|
|
+# SPI support
|
|
+#
|
|
+# CONFIG_SPI is not set
|
|
+# CONFIG_SPI_MASTER is not set
|
|
+# CONFIG_W1 is not set
|
|
+# CONFIG_POWER_SUPPLY is not set
|
|
+# CONFIG_HWMON is not set
|
|
+# CONFIG_WATCHDOG is not set
|
|
+
|
|
+#
|
|
+# Sonics Silicon Backplane
|
|
+#
|
|
+CONFIG_SSB_POSSIBLE=y
|
|
+# CONFIG_SSB is not set
|
|
+
|
|
+#
|
|
+# Multifunction device drivers
|
|
+#
|
|
+# CONFIG_MFD_SM501 is not set
|
|
+
|
|
+#
|
|
+# Multimedia devices
|
|
+#
|
|
+# CONFIG_VIDEO_DEV is not set
|
|
+# CONFIG_DVB_CORE is not set
|
|
+# CONFIG_DAB is not set
|
|
+
|
|
+#
|
|
+# Graphics support
|
|
+#
|
|
+# CONFIG_VGASTATE is not set
|
|
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
|
+# CONFIG_FB is not set
|
|
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Display device support
|
|
+#
|
|
+# CONFIG_DISPLAY_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Console display driver support
|
|
+#
|
|
+# CONFIG_VGA_CONSOLE is not set
|
|
+CONFIG_DUMMY_CONSOLE=y
|
|
+
|
|
+#
|
|
+# Sound
|
|
+#
|
|
+# CONFIG_SOUND is not set
|
|
+CONFIG_HID_SUPPORT=y
|
|
+CONFIG_HID=y
|
|
+# CONFIG_HID_DEBUG is not set
|
|
+# CONFIG_HIDRAW is not set
|
|
+CONFIG_USB_SUPPORT=y
|
|
+CONFIG_USB_ARCH_HAS_HCD=y
|
|
+CONFIG_USB_ARCH_HAS_OHCI=y
|
|
+# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
+# CONFIG_USB is not set
|
|
+
|
|
+#
|
|
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Gadget Support
|
|
+#
|
|
+# CONFIG_USB_GADGET is not set
|
|
+# CONFIG_MMC is not set
|
|
+# CONFIG_NEW_LEDS is not set
|
|
+CONFIG_RTC_LIB=y
|
|
+# CONFIG_RTC_CLASS is not set
|
|
+
|
|
+#
|
|
+# Userspace I/O
|
|
+#
|
|
+# CONFIG_UIO is not set
|
|
+
|
|
+#
|
|
+# File systems
|
|
+#
|
|
+CONFIG_EXT2_FS=y
|
|
+CONFIG_EXT2_FS_XATTR=y
|
|
+# CONFIG_EXT2_FS_POSIX_ACL is not set
|
|
+# CONFIG_EXT2_FS_SECURITY is not set
|
|
+# CONFIG_EXT2_FS_XIP is not set
|
|
+# CONFIG_EXT3_FS is not set
|
|
+# CONFIG_EXT4DEV_FS is not set
|
|
+CONFIG_FS_MBCACHE=y
|
|
+# CONFIG_REISERFS_FS is not set
|
|
+# CONFIG_JFS_FS is not set
|
|
+CONFIG_FS_POSIX_ACL=y
|
|
+# CONFIG_XFS_FS is not set
|
|
+# CONFIG_GFS2_FS is not set
|
|
+# CONFIG_OCFS2_FS is not set
|
|
+CONFIG_MINIX_FS=y
|
|
+# CONFIG_ROMFS_FS is not set
|
|
+CONFIG_INOTIFY=y
|
|
+CONFIG_INOTIFY_USER=y
|
|
+# CONFIG_QUOTA is not set
|
|
+CONFIG_DNOTIFY=y
|
|
+# CONFIG_AUTOFS_FS is not set
|
|
+# CONFIG_AUTOFS4_FS is not set
|
|
+# CONFIG_FUSE_FS is not set
|
|
+
|
|
+#
|
|
+# CD-ROM/DVD Filesystems
|
|
+#
|
|
+# CONFIG_ISO9660_FS is not set
|
|
+# CONFIG_UDF_FS is not set
|
|
+
|
|
+#
|
|
+# DOS/FAT/NT Filesystems
|
|
+#
|
|
+CONFIG_FAT_FS=y
|
|
+CONFIG_MSDOS_FS=y
|
|
+CONFIG_VFAT_FS=y
|
|
+CONFIG_FAT_DEFAULT_CODEPAGE=437
|
|
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
|
+# CONFIG_NTFS_FS is not set
|
|
+
|
|
+#
|
|
+# Pseudo filesystems
|
|
+#
|
|
+CONFIG_PROC_FS=y
|
|
+CONFIG_PROC_KCORE=y
|
|
+CONFIG_PROC_SYSCTL=y
|
|
+CONFIG_SYSFS=y
|
|
+CONFIG_TMPFS=y
|
|
+# CONFIG_TMPFS_POSIX_ACL is not set
|
|
+# CONFIG_HUGETLB_PAGE is not set
|
|
+# CONFIG_CONFIGFS_FS is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous filesystems
|
|
+#
|
|
+# CONFIG_ADFS_FS is not set
|
|
+# CONFIG_AFFS_FS is not set
|
|
+# CONFIG_HFS_FS is not set
|
|
+# CONFIG_HFSPLUS_FS is not set
|
|
+# CONFIG_BEFS_FS is not set
|
|
+# CONFIG_BFS_FS is not set
|
|
+# CONFIG_EFS_FS is not set
|
|
+# CONFIG_JFFS2_FS is not set
|
|
+# CONFIG_CRAMFS is not set
|
|
+# CONFIG_VXFS_FS is not set
|
|
+# CONFIG_HPFS_FS is not set
|
|
+# CONFIG_QNX4FS_FS is not set
|
|
+# CONFIG_SYSV_FS is not set
|
|
+# CONFIG_UFS_FS is not set
|
|
+CONFIG_NETWORK_FILESYSTEMS=y
|
|
+CONFIG_NFS_FS=y
|
|
+CONFIG_NFS_V3=y
|
|
+CONFIG_NFS_V3_ACL=y
|
|
+CONFIG_NFS_V4=y
|
|
+CONFIG_NFS_DIRECTIO=y
|
|
+# CONFIG_NFSD is not set
|
|
+CONFIG_ROOT_NFS=y
|
|
+CONFIG_LOCKD=y
|
|
+CONFIG_LOCKD_V4=y
|
|
+CONFIG_NFS_ACL_SUPPORT=y
|
|
+CONFIG_NFS_COMMON=y
|
|
+CONFIG_SUNRPC=y
|
|
+CONFIG_SUNRPC_GSS=y
|
|
+# CONFIG_SUNRPC_BIND34 is not set
|
|
+CONFIG_RPCSEC_GSS_KRB5=y
|
|
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
|
+# CONFIG_SMB_FS is not set
|
|
+# CONFIG_CIFS is not set
|
|
+# CONFIG_NCP_FS is not set
|
|
+# CONFIG_CODA_FS is not set
|
|
+# CONFIG_AFS_FS is not set
|
|
+
|
|
+#
|
|
+# Partition Types
|
|
+#
|
|
+CONFIG_PARTITION_ADVANCED=y
|
|
+# CONFIG_ACORN_PARTITION is not set
|
|
+# CONFIG_OSF_PARTITION is not set
|
|
+# CONFIG_AMIGA_PARTITION is not set
|
|
+# CONFIG_ATARI_PARTITION is not set
|
|
+# CONFIG_MAC_PARTITION is not set
|
|
+CONFIG_MSDOS_PARTITION=y
|
|
+# CONFIG_BSD_DISKLABEL is not set
|
|
+# CONFIG_MINIX_SUBPARTITION is not set
|
|
+# CONFIG_SOLARIS_X86_PARTITION is not set
|
|
+# CONFIG_UNIXWARE_DISKLABEL is not set
|
|
+# CONFIG_LDM_PARTITION is not set
|
|
+# CONFIG_SGI_PARTITION is not set
|
|
+# CONFIG_ULTRIX_PARTITION is not set
|
|
+# CONFIG_SUN_PARTITION is not set
|
|
+# CONFIG_KARMA_PARTITION is not set
|
|
+# CONFIG_EFI_PARTITION is not set
|
|
+# CONFIG_SYSV68_PARTITION is not set
|
|
+CONFIG_NLS=y
|
|
+CONFIG_NLS_DEFAULT="iso8859-1"
|
|
+CONFIG_NLS_CODEPAGE_437=y
|
|
+# CONFIG_NLS_CODEPAGE_737 is not set
|
|
+# CONFIG_NLS_CODEPAGE_775 is not set
|
|
+# CONFIG_NLS_CODEPAGE_850 is not set
|
|
+# CONFIG_NLS_CODEPAGE_852 is not set
|
|
+# CONFIG_NLS_CODEPAGE_855 is not set
|
|
+# CONFIG_NLS_CODEPAGE_857 is not set
|
|
+# CONFIG_NLS_CODEPAGE_860 is not set
|
|
+# CONFIG_NLS_CODEPAGE_861 is not set
|
|
+# CONFIG_NLS_CODEPAGE_862 is not set
|
|
+# CONFIG_NLS_CODEPAGE_863 is not set
|
|
+# CONFIG_NLS_CODEPAGE_864 is not set
|
|
+# CONFIG_NLS_CODEPAGE_865 is not set
|
|
+# CONFIG_NLS_CODEPAGE_866 is not set
|
|
+# CONFIG_NLS_CODEPAGE_869 is not set
|
|
+CONFIG_NLS_CODEPAGE_936=y
|
|
+# CONFIG_NLS_CODEPAGE_950 is not set
|
|
+# CONFIG_NLS_CODEPAGE_932 is not set
|
|
+# CONFIG_NLS_CODEPAGE_949 is not set
|
|
+# CONFIG_NLS_CODEPAGE_874 is not set
|
|
+# CONFIG_NLS_ISO8859_8 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1250 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1251 is not set
|
|
+CONFIG_NLS_ASCII=y
|
|
+CONFIG_NLS_ISO8859_1=y
|
|
+# CONFIG_NLS_ISO8859_2 is not set
|
|
+# CONFIG_NLS_ISO8859_3 is not set
|
|
+# CONFIG_NLS_ISO8859_4 is not set
|
|
+# CONFIG_NLS_ISO8859_5 is not set
|
|
+# CONFIG_NLS_ISO8859_6 is not set
|
|
+# CONFIG_NLS_ISO8859_7 is not set
|
|
+# CONFIG_NLS_ISO8859_9 is not set
|
|
+# CONFIG_NLS_ISO8859_13 is not set
|
|
+# CONFIG_NLS_ISO8859_14 is not set
|
|
+# CONFIG_NLS_ISO8859_15 is not set
|
|
+# CONFIG_NLS_KOI8_R is not set
|
|
+# CONFIG_NLS_KOI8_U is not set
|
|
+# CONFIG_NLS_UTF8 is not set
|
|
+# CONFIG_DLM is not set
|
|
+
|
|
+#
|
|
+# Yaffs2 Filesystems
|
|
+#
|
|
+CONFIG_YAFFS_FS=y
|
|
+CONFIG_YAFFS_YAFFS1=y
|
|
+# CONFIG_YAFFS_DOES_ECC is not set
|
|
+CONFIG_YAFFS_YAFFS2=y
|
|
+CONFIG_YAFFS_AUTO_YAFFS2=y
|
|
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
|
|
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
|
|
+CONFIG_YAFFS_DISABLE_CHUNK_ERASED_CHECK=y
|
|
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
|
|
+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
|
|
+CONFIG_INSTRUMENTATION=y
|
|
+# CONFIG_PROFILING is not set
|
|
+# CONFIG_MARKERS is not set
|
|
+
|
|
+#
|
|
+# Kernel hacking
|
|
+#
|
|
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
+# CONFIG_PRINTK_TIME is not set
|
|
+CONFIG_ENABLE_WARN_DEPRECATED=y
|
|
+CONFIG_ENABLE_MUST_CHECK=y
|
|
+CONFIG_MAGIC_SYSRQ=y
|
|
+# CONFIG_UNUSED_SYMBOLS is not set
|
|
+# CONFIG_DEBUG_FS is not set
|
|
+# CONFIG_HEADERS_CHECK is not set
|
|
+# CONFIG_DEBUG_KERNEL is not set
|
|
+# CONFIG_SAMPLES is not set
|
|
+CONFIG_CMDLINE=""
|
|
+
|
|
+#
|
|
+# Security options
|
|
+#
|
|
+# CONFIG_KEYS is not set
|
|
+# CONFIG_SECURITY is not set
|
|
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
|
+CONFIG_CRYPTO=y
|
|
+CONFIG_CRYPTO_ALGAPI=y
|
|
+CONFIG_CRYPTO_BLKCIPHER=y
|
|
+CONFIG_CRYPTO_MANAGER=y
|
|
+# CONFIG_CRYPTO_HMAC is not set
|
|
+# CONFIG_CRYPTO_XCBC is not set
|
|
+# CONFIG_CRYPTO_NULL is not set
|
|
+# CONFIG_CRYPTO_MD4 is not set
|
|
+CONFIG_CRYPTO_MD5=y
|
|
+# CONFIG_CRYPTO_SHA1 is not set
|
|
+# CONFIG_CRYPTO_SHA256 is not set
|
|
+# CONFIG_CRYPTO_SHA512 is not set
|
|
+# CONFIG_CRYPTO_WP512 is not set
|
|
+# CONFIG_CRYPTO_TGR192 is not set
|
|
+# CONFIG_CRYPTO_GF128MUL is not set
|
|
+# CONFIG_CRYPTO_ECB is not set
|
|
+CONFIG_CRYPTO_CBC=y
|
|
+# CONFIG_CRYPTO_PCBC is not set
|
|
+# CONFIG_CRYPTO_LRW is not set
|
|
+# CONFIG_CRYPTO_XTS is not set
|
|
+# CONFIG_CRYPTO_CRYPTD is not set
|
|
+CONFIG_CRYPTO_DES=y
|
|
+# CONFIG_CRYPTO_FCRYPT is not set
|
|
+# CONFIG_CRYPTO_BLOWFISH is not set
|
|
+# CONFIG_CRYPTO_TWOFISH is not set
|
|
+# CONFIG_CRYPTO_SERPENT is not set
|
|
+# CONFIG_CRYPTO_AES is not set
|
|
+# CONFIG_CRYPTO_CAST5 is not set
|
|
+# CONFIG_CRYPTO_CAST6 is not set
|
|
+# CONFIG_CRYPTO_TEA is not set
|
|
+# CONFIG_CRYPTO_ARC4 is not set
|
|
+# CONFIG_CRYPTO_KHAZAD is not set
|
|
+# CONFIG_CRYPTO_ANUBIS is not set
|
|
+# CONFIG_CRYPTO_SEED is not set
|
|
+# CONFIG_CRYPTO_DEFLATE is not set
|
|
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
|
|
+# CONFIG_CRYPTO_CRC32C is not set
|
|
+# CONFIG_CRYPTO_CAMELLIA is not set
|
|
+# CONFIG_CRYPTO_TEST is not set
|
|
+# CONFIG_CRYPTO_AUTHENC is not set
|
|
+# CONFIG_CRYPTO_LZO is not set
|
|
+CONFIG_CRYPTO_HW=y
|
|
+
|
|
+#
|
|
+# Library routines
|
|
+#
|
|
+CONFIG_BITREVERSE=y
|
|
+# CONFIG_CRC_CCITT is not set
|
|
+# CONFIG_CRC16 is not set
|
|
+# CONFIG_CRC_ITU_T is not set
|
|
+CONFIG_CRC32=y
|
|
+# CONFIG_CRC7 is not set
|
|
+# CONFIG_LIBCRC32C is not set
|
|
+CONFIG_PLIST=y
|
|
+CONFIG_HAS_IOMEM=y
|
|
+CONFIG_HAS_IOPORT=y
|
|
+CONFIG_HAS_DMA=y
|
|
--- linux-2.6.24.7.old/arch/mips/configs/leo_defconfig 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/configs/leo_defconfig 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,1256 @@
|
|
+#
|
|
+# Automatically generated make config: don't edit
|
|
+# Linux kernel version: 2.6.24.3
|
|
+# Thu Jun 12 13:59:18 2008
|
|
+#
|
|
+CONFIG_MIPS=y
|
|
+
|
|
+#
|
|
+# Machine selection
|
|
+#
|
|
+# CONFIG_JZ4730_PMP is not set
|
|
+# CONFIG_JZ4740_PAVO is not set
|
|
+CONFIG_JZ4740_LEO=y
|
|
+# CONFIG_JZ4740_LYRA is not set
|
|
+# CONFIG_JZ4725_DIPPER is not set
|
|
+# CONFIG_JZ4720_VIRGO is not set
|
|
+# CONFIG_JZ4750_FUWA is not set
|
|
+# CONFIG_MACH_ALCHEMY is not set
|
|
+# CONFIG_BASLER_EXCITE is not set
|
|
+# CONFIG_BCM47XX is not set
|
|
+# CONFIG_MIPS_COBALT is not set
|
|
+# CONFIG_MACH_DECSTATION is not set
|
|
+# CONFIG_MACH_JAZZ is not set
|
|
+# CONFIG_LASAT is not set
|
|
+# CONFIG_LEMOTE_FULONG is not set
|
|
+# CONFIG_MIPS_ATLAS is not set
|
|
+# CONFIG_MIPS_MALTA is not set
|
|
+# CONFIG_MIPS_SEAD is not set
|
|
+# CONFIG_MIPS_SIM is not set
|
|
+# CONFIG_MARKEINS is not set
|
|
+# CONFIG_MACH_VR41XX is not set
|
|
+# CONFIG_PNX8550_JBS is not set
|
|
+# CONFIG_PNX8550_STB810 is not set
|
|
+# CONFIG_PMC_MSP is not set
|
|
+# CONFIG_PMC_YOSEMITE is not set
|
|
+# CONFIG_QEMU is not set
|
|
+# CONFIG_SGI_IP22 is not set
|
|
+# CONFIG_SGI_IP27 is not set
|
|
+# CONFIG_SGI_IP32 is not set
|
|
+# CONFIG_SIBYTE_CRHINE is not set
|
|
+# CONFIG_SIBYTE_CARMEL is not set
|
|
+# CONFIG_SIBYTE_CRHONE is not set
|
|
+# CONFIG_SIBYTE_RHONE is not set
|
|
+# CONFIG_SIBYTE_SWARM is not set
|
|
+# CONFIG_SIBYTE_LITTLESUR is not set
|
|
+# CONFIG_SIBYTE_SENTOSA is not set
|
|
+# CONFIG_SIBYTE_PTSWARM is not set
|
|
+# CONFIG_SIBYTE_BIGSUR is not set
|
|
+# CONFIG_SNI_RM is not set
|
|
+# CONFIG_TOSHIBA_JMR3927 is not set
|
|
+# CONFIG_TOSHIBA_RBTX4927 is not set
|
|
+# CONFIG_TOSHIBA_RBTX4938 is not set
|
|
+# CONFIG_WR_PPMC is not set
|
|
+CONFIG_SOC_JZ4740=y
|
|
+CONFIG_JZSOC=y
|
|
+CONFIG_JZRISC=y
|
|
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
|
+CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|
+CONFIG_GENERIC_HWEIGHT=y
|
|
+CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
+CONFIG_GENERIC_CLOCKEVENTS=y
|
|
+CONFIG_GENERIC_TIME=y
|
|
+CONFIG_GENERIC_CMOS_UPDATE=y
|
|
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
|
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
|
|
+CONFIG_DMA_NONCOHERENT=y
|
|
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
|
+# CONFIG_HOTPLUG_CPU is not set
|
|
+# CONFIG_NO_IOPORT is not set
|
|
+# CONFIG_CPU_BIG_ENDIAN is not set
|
|
+CONFIG_CPU_LITTLE_ENDIAN=y
|
|
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
|
+CONFIG_MIPS_L1_CACHE_SHIFT=5
|
|
+
|
|
+#
|
|
+# CPU selection
|
|
+#
|
|
+# CONFIG_CPU_LOONGSON2 is not set
|
|
+CONFIG_CPU_MIPS32_R1=y
|
|
+# CONFIG_CPU_MIPS32_R2 is not set
|
|
+# CONFIG_CPU_MIPS64_R1 is not set
|
|
+# CONFIG_CPU_MIPS64_R2 is not set
|
|
+# CONFIG_CPU_R3000 is not set
|
|
+# CONFIG_CPU_TX39XX is not set
|
|
+# CONFIG_CPU_VR41XX is not set
|
|
+# CONFIG_CPU_R4300 is not set
|
|
+# CONFIG_CPU_R4X00 is not set
|
|
+# CONFIG_CPU_TX49XX is not set
|
|
+# CONFIG_CPU_R5000 is not set
|
|
+# CONFIG_CPU_R5432 is not set
|
|
+# CONFIG_CPU_R6000 is not set
|
|
+# CONFIG_CPU_NEVADA is not set
|
|
+# CONFIG_CPU_R8000 is not set
|
|
+# CONFIG_CPU_R10000 is not set
|
|
+# CONFIG_CPU_RM7000 is not set
|
|
+# CONFIG_CPU_RM9000 is not set
|
|
+# CONFIG_CPU_SB1 is not set
|
|
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
|
+CONFIG_CPU_MIPS32=y
|
|
+CONFIG_CPU_MIPSR1=y
|
|
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
|
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
|
+
|
|
+#
|
|
+# Kernel type
|
|
+#
|
|
+CONFIG_32BIT=y
|
|
+# CONFIG_64BIT is not set
|
|
+CONFIG_PAGE_SIZE_4KB=y
|
|
+# CONFIG_PAGE_SIZE_8KB is not set
|
|
+# CONFIG_PAGE_SIZE_16KB is not set
|
|
+# CONFIG_PAGE_SIZE_64KB is not set
|
|
+CONFIG_CPU_HAS_PREFETCH=y
|
|
+CONFIG_MIPS_MT_DISABLED=y
|
|
+# CONFIG_MIPS_MT_SMP is not set
|
|
+# CONFIG_MIPS_MT_SMTC is not set
|
|
+CONFIG_CPU_HAS_LLSC=y
|
|
+CONFIG_CPU_HAS_SYNC=y
|
|
+CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_GENERIC_IRQ_PROBE=y
|
|
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
|
+CONFIG_ARCH_FLATMEM_ENABLE=y
|
|
+CONFIG_ARCH_POPULATES_NODE_MAP=y
|
|
+CONFIG_SELECT_MEMORY_MODEL=y
|
|
+CONFIG_FLATMEM_MANUAL=y
|
|
+# CONFIG_DISCONTIGMEM_MANUAL is not set
|
|
+# CONFIG_SPARSEMEM_MANUAL is not set
|
|
+CONFIG_FLATMEM=y
|
|
+CONFIG_FLAT_NODE_MEM_MAP=y
|
|
+# CONFIG_SPARSEMEM_STATIC is not set
|
|
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
|
+CONFIG_SPLIT_PTLOCK_CPUS=4
|
|
+# CONFIG_RESOURCES_64BIT is not set
|
|
+CONFIG_ZONE_DMA_FLAG=0
|
|
+CONFIG_VIRT_TO_BUS=y
|
|
+# CONFIG_TICK_ONESHOT is not set
|
|
+# CONFIG_NO_HZ is not set
|
|
+# CONFIG_HIGH_RES_TIMERS is not set
|
|
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
+# CONFIG_HZ_48 is not set
|
|
+CONFIG_HZ_100=y
|
|
+# CONFIG_HZ_128 is not set
|
|
+# CONFIG_HZ_250 is not set
|
|
+# CONFIG_HZ_256 is not set
|
|
+# CONFIG_HZ_1000 is not set
|
|
+# CONFIG_HZ_1024 is not set
|
|
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
|
+CONFIG_HZ=100
|
|
+# CONFIG_PREEMPT_NONE is not set
|
|
+# CONFIG_PREEMPT_VOLUNTARY is not set
|
|
+CONFIG_PREEMPT=y
|
|
+CONFIG_PREEMPT_BKL=y
|
|
+# CONFIG_KEXEC is not set
|
|
+CONFIG_SECCOMP=y
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
+
|
|
+#
|
|
+# General setup
|
|
+#
|
|
+CONFIG_EXPERIMENTAL=y
|
|
+CONFIG_BROKEN_ON_SMP=y
|
|
+CONFIG_LOCK_KERNEL=y
|
|
+CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
+CONFIG_LOCALVERSION=""
|
|
+CONFIG_LOCALVERSION_AUTO=y
|
|
+CONFIG_SWAP=y
|
|
+CONFIG_SYSVIPC=y
|
|
+CONFIG_SYSVIPC_SYSCTL=y
|
|
+# CONFIG_POSIX_MQUEUE is not set
|
|
+# CONFIG_BSD_PROCESS_ACCT is not set
|
|
+# CONFIG_TASKSTATS is not set
|
|
+# CONFIG_USER_NS is not set
|
|
+# CONFIG_PID_NS is not set
|
|
+# CONFIG_AUDIT is not set
|
|
+# CONFIG_IKCONFIG is not set
|
|
+CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_CGROUPS is not set
|
|
+CONFIG_FAIR_GROUP_SCHED=y
|
|
+CONFIG_FAIR_USER_SCHED=y
|
|
+# CONFIG_FAIR_CGROUP_SCHED is not set
|
|
+CONFIG_SYSFS_DEPRECATED=y
|
|
+CONFIG_RELAY=y
|
|
+# CONFIG_BLK_DEV_INITRD is not set
|
|
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
|
+CONFIG_SYSCTL=y
|
|
+CONFIG_EMBEDDED=y
|
|
+CONFIG_SYSCTL_SYSCALL=y
|
|
+CONFIG_KALLSYMS=y
|
|
+CONFIG_KALLSYMS_ALL=y
|
|
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
|
+CONFIG_HOTPLUG=y
|
|
+CONFIG_PRINTK=y
|
|
+CONFIG_BUG=y
|
|
+CONFIG_ELF_CORE=y
|
|
+CONFIG_BASE_FULL=y
|
|
+CONFIG_FUTEX=y
|
|
+CONFIG_ANON_INODES=y
|
|
+CONFIG_EPOLL=y
|
|
+CONFIG_SIGNALFD=y
|
|
+CONFIG_EVENTFD=y
|
|
+CONFIG_SHMEM=y
|
|
+CONFIG_VM_EVENT_COUNTERS=y
|
|
+CONFIG_SLAB=y
|
|
+# CONFIG_SLUB is not set
|
|
+# CONFIG_SLOB is not set
|
|
+CONFIG_SLABINFO=y
|
|
+CONFIG_RT_MUTEXES=y
|
|
+# CONFIG_TINY_SHMEM is not set
|
|
+CONFIG_BASE_SMALL=0
|
|
+CONFIG_MODULES=y
|
|
+CONFIG_MODULE_UNLOAD=y
|
|
+# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
+CONFIG_MODVERSIONS=y
|
|
+CONFIG_MODULE_SRCVERSION_ALL=y
|
|
+CONFIG_KMOD=y
|
|
+CONFIG_BLOCK=y
|
|
+# CONFIG_LBD is not set
|
|
+# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
+# CONFIG_LSF is not set
|
|
+# CONFIG_BLK_DEV_BSG is not set
|
|
+
|
|
+#
|
|
+# IO Schedulers
|
|
+#
|
|
+CONFIG_IOSCHED_NOOP=y
|
|
+CONFIG_IOSCHED_AS=y
|
|
+CONFIG_IOSCHED_DEADLINE=y
|
|
+CONFIG_IOSCHED_CFQ=y
|
|
+CONFIG_DEFAULT_AS=y
|
|
+# CONFIG_DEFAULT_DEADLINE is not set
|
|
+# CONFIG_DEFAULT_CFQ is not set
|
|
+# CONFIG_DEFAULT_NOOP is not set
|
|
+CONFIG_DEFAULT_IOSCHED="anticipatory"
|
|
+
|
|
+#
|
|
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
|
|
+#
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
+CONFIG_MMU=y
|
|
+# CONFIG_PCCARD is not set
|
|
+
|
|
+#
|
|
+# Executable file formats
|
|
+#
|
|
+CONFIG_BINFMT_ELF=y
|
|
+# CONFIG_BINFMT_MISC is not set
|
|
+CONFIG_TRAD_SIGNALS=y
|
|
+
|
|
+#
|
|
+# CPU Frequency scaling
|
|
+#
|
|
+CONFIG_CPU_FREQ_JZ=y
|
|
+CONFIG_CPU_FREQ=y
|
|
+CONFIG_CPU_FREQ_TABLE=y
|
|
+# CONFIG_CPU_FREQ_DEBUG is not set
|
|
+CONFIG_CPU_FREQ_STAT=y
|
|
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
|
|
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
|
|
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
|
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
|
|
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
|
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
|
|
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
|
|
+
|
|
+#
|
|
+# Power management options
|
|
+#
|
|
+CONFIG_PM=y
|
|
+CONFIG_PM_LEGACY=y
|
|
+# CONFIG_PM_DEBUG is not set
|
|
+CONFIG_SUSPEND_UP_POSSIBLE=y
|
|
+# CONFIG_SUSPEND is not set
|
|
+
|
|
+#
|
|
+# Networking
|
|
+#
|
|
+CONFIG_NET=y
|
|
+
|
|
+#
|
|
+# Networking options
|
|
+#
|
|
+CONFIG_PACKET=y
|
|
+# CONFIG_PACKET_MMAP is not set
|
|
+CONFIG_UNIX=y
|
|
+# CONFIG_NET_KEY is not set
|
|
+CONFIG_INET=y
|
|
+# CONFIG_IP_MULTICAST is not set
|
|
+# CONFIG_IP_ADVANCED_ROUTER is not set
|
|
+CONFIG_IP_FIB_HASH=y
|
|
+CONFIG_IP_PNP=y
|
|
+CONFIG_IP_PNP_DHCP=y
|
|
+CONFIG_IP_PNP_BOOTP=y
|
|
+# CONFIG_IP_PNP_RARP is not set
|
|
+# CONFIG_NET_IPIP is not set
|
|
+# CONFIG_NET_IPGRE is not set
|
|
+# CONFIG_ARPD is not set
|
|
+# CONFIG_SYN_COOKIES is not set
|
|
+# CONFIG_INET_AH is not set
|
|
+# CONFIG_INET_ESP is not set
|
|
+# CONFIG_INET_IPCOMP is not set
|
|
+# CONFIG_INET_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
|
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_BEET is not set
|
|
+# CONFIG_INET_LRO is not set
|
|
+# CONFIG_INET_DIAG is not set
|
|
+# CONFIG_TCP_CONG_ADVANCED is not set
|
|
+CONFIG_TCP_CONG_CUBIC=y
|
|
+CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
+# CONFIG_TCP_MD5SIG is not set
|
|
+# CONFIG_IPV6 is not set
|
|
+# CONFIG_INET6_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET6_TUNNEL is not set
|
|
+# CONFIG_NETWORK_SECMARK is not set
|
|
+# CONFIG_NETFILTER is not set
|
|
+# CONFIG_IP_DCCP is not set
|
|
+# CONFIG_IP_SCTP is not set
|
|
+# CONFIG_TIPC is not set
|
|
+# CONFIG_ATM is not set
|
|
+# CONFIG_BRIDGE is not set
|
|
+# CONFIG_VLAN_8021Q is not set
|
|
+# CONFIG_DECNET is not set
|
|
+# CONFIG_LLC2 is not set
|
|
+# CONFIG_IPX is not set
|
|
+# CONFIG_ATALK is not set
|
|
+# CONFIG_X25 is not set
|
|
+# CONFIG_LAPB is not set
|
|
+# CONFIG_ECONET is not set
|
|
+# CONFIG_WAN_ROUTER is not set
|
|
+# CONFIG_NET_SCHED is not set
|
|
+
|
|
+#
|
|
+# Network testing
|
|
+#
|
|
+# CONFIG_NET_PKTGEN is not set
|
|
+# CONFIG_HAMRADIO is not set
|
|
+# CONFIG_IRDA is not set
|
|
+# CONFIG_BT is not set
|
|
+# CONFIG_AF_RXRPC is not set
|
|
+
|
|
+#
|
|
+# Wireless
|
|
+#
|
|
+# CONFIG_CFG80211 is not set
|
|
+CONFIG_WIRELESS_EXT=y
|
|
+# CONFIG_MAC80211 is not set
|
|
+# CONFIG_IEEE80211 is not set
|
|
+# CONFIG_RFKILL is not set
|
|
+# CONFIG_NET_9P is not set
|
|
+
|
|
+#
|
|
+# Device Drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# Generic Driver Options
|
|
+#
|
|
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
+CONFIG_STANDALONE=y
|
|
+CONFIG_PREVENT_FIRMWARE_BUILD=y
|
|
+# CONFIG_FW_LOADER is not set
|
|
+# CONFIG_SYS_HYPERVISOR is not set
|
|
+# CONFIG_CONNECTOR is not set
|
|
+CONFIG_MTD=y
|
|
+# CONFIG_MTD_DEBUG is not set
|
|
+CONFIG_MTD_CONCAT=y
|
|
+CONFIG_MTD_PARTITIONS=y
|
|
+# CONFIG_MTD_REDBOOT_PARTS is not set
|
|
+# CONFIG_MTD_CMDLINE_PARTS is not set
|
|
+
|
|
+#
|
|
+# User Modules And Translation Layers
|
|
+#
|
|
+CONFIG_MTD_CHAR=y
|
|
+CONFIG_MTD_BLKDEVS=y
|
|
+CONFIG_MTD_BLOCK=y
|
|
+# CONFIG_FTL is not set
|
|
+# CONFIG_NFTL is not set
|
|
+# CONFIG_INFTL is not set
|
|
+# CONFIG_RFD_FTL is not set
|
|
+# CONFIG_SSFDC is not set
|
|
+# CONFIG_MTD_OOPS is not set
|
|
+
|
|
+#
|
|
+# RAM/ROM/Flash chip drivers
|
|
+#
|
|
+# CONFIG_MTD_CFI is not set
|
|
+# CONFIG_MTD_JEDECPROBE is not set
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
|
+CONFIG_MTD_CFI_I1=y
|
|
+CONFIG_MTD_CFI_I2=y
|
|
+# CONFIG_MTD_CFI_I4 is not set
|
|
+# CONFIG_MTD_CFI_I8 is not set
|
|
+# CONFIG_MTD_RAM is not set
|
|
+# CONFIG_MTD_ROM is not set
|
|
+# CONFIG_MTD_ABSENT is not set
|
|
+
|
|
+#
|
|
+# Mapping drivers for chip access
|
|
+#
|
|
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
|
+# CONFIG_MTD_PLATRAM is not set
|
|
+
|
|
+#
|
|
+# Self-contained MTD device drivers
|
|
+#
|
|
+# CONFIG_MTD_SLRAM is not set
|
|
+# CONFIG_MTD_PHRAM is not set
|
|
+# CONFIG_MTD_MTDRAM is not set
|
|
+CONFIG_MTD_BLOCK2MTD=y
|
|
+
|
|
+#
|
|
+# Disk-On-Chip Device Drivers
|
|
+#
|
|
+# CONFIG_MTD_DOC2000 is not set
|
|
+# CONFIG_MTD_DOC2001 is not set
|
|
+# CONFIG_MTD_DOC2001PLUS is not set
|
|
+CONFIG_MTD_NAND=y
|
|
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
|
|
+# CONFIG_MTD_NAND_ECC_SMC is not set
|
|
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
|
|
+CONFIG_MTD_NAND_IDS=y
|
|
+# CONFIG_MTD_NAND_DISKONCHIP is not set
|
|
+# CONFIG_MTD_NAND_NANDSIM is not set
|
|
+# CONFIG_MTD_NAND_PLATFORM is not set
|
|
+# CONFIG_MTD_ALAUDA is not set
|
|
+CONFIG_MTD_NAND_JZ4740=y
|
|
+# CONFIG_MTD_HW_HM_ECC is not set
|
|
+CONFIG_MTD_SW_HM_ECC=y
|
|
+# CONFIG_MTD_HW_RS_ECC is not set
|
|
+# CONFIG_MTD_MTDBLOCK_WRITE_VERIFY_ENABLE is not set
|
|
+CONFIG_MTD_OOB_COPIES=3
|
|
+CONFIG_MTD_BADBLOCK_FLAG_PAGE=0
|
|
+# CONFIG_MTD_ONENAND is not set
|
|
+
|
|
+#
|
|
+# UBI - Unsorted block images
|
|
+#
|
|
+CONFIG_MTD_UBI=m
|
|
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
|
+CONFIG_MTD_UBI_BEB_RESERVE=1
|
|
+# CONFIG_MTD_UBI_GLUEBI is not set
|
|
+
|
|
+#
|
|
+# UBI debugging options
|
|
+#
|
|
+# CONFIG_MTD_UBI_DEBUG is not set
|
|
+CONFIG_MTD_UBI_BLKDEVS=m
|
|
+CONFIG_MTD_UBI_BLOCK=m
|
|
+# CONFIG_PARPORT is not set
|
|
+CONFIG_PNP=y
|
|
+# CONFIG_PNP_DEBUG is not set
|
|
+
|
|
+#
|
|
+# Protocols
|
|
+#
|
|
+# CONFIG_PNPACPI is not set
|
|
+CONFIG_BLK_DEV=y
|
|
+# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
+CONFIG_BLK_DEV_LOOP=y
|
|
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
|
+# CONFIG_BLK_DEV_NBD is not set
|
|
+# CONFIG_BLK_DEV_UB is not set
|
|
+CONFIG_BLK_DEV_RAM=y
|
|
+CONFIG_BLK_DEV_RAM_COUNT=2
|
|
+CONFIG_BLK_DEV_RAM_SIZE=4096
|
|
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
+# CONFIG_CDROM_PKTCDVD is not set
|
|
+# CONFIG_ATA_OVER_ETH is not set
|
|
+CONFIG_MISC_DEVICES=y
|
|
+# CONFIG_EEPROM_93CX6 is not set
|
|
+# CONFIG_IDE is not set
|
|
+
|
|
+#
|
|
+# SCSI device support
|
|
+#
|
|
+# CONFIG_RAID_ATTRS is not set
|
|
+CONFIG_SCSI=y
|
|
+CONFIG_SCSI_DMA=y
|
|
+# CONFIG_SCSI_TGT is not set
|
|
+# CONFIG_SCSI_NETLINK is not set
|
|
+CONFIG_SCSI_PROC_FS=y
|
|
+
|
|
+#
|
|
+# SCSI support type (disk, tape, CD-ROM)
|
|
+#
|
|
+CONFIG_BLK_DEV_SD=y
|
|
+# CONFIG_CHR_DEV_ST is not set
|
|
+# CONFIG_CHR_DEV_OSST is not set
|
|
+# CONFIG_BLK_DEV_SR is not set
|
|
+# CONFIG_CHR_DEV_SG is not set
|
|
+# CONFIG_CHR_DEV_SCH is not set
|
|
+
|
|
+#
|
|
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
|
+#
|
|
+# CONFIG_SCSI_MULTI_LUN is not set
|
|
+# CONFIG_SCSI_CONSTANTS is not set
|
|
+# CONFIG_SCSI_LOGGING is not set
|
|
+# CONFIG_SCSI_SCAN_ASYNC is not set
|
|
+CONFIG_SCSI_WAIT_SCAN=m
|
|
+
|
|
+#
|
|
+# SCSI Transports
|
|
+#
|
|
+# CONFIG_SCSI_SPI_ATTRS is not set
|
|
+# CONFIG_SCSI_FC_ATTRS is not set
|
|
+# CONFIG_SCSI_ISCSI_ATTRS is not set
|
|
+# CONFIG_SCSI_SAS_LIBSAS is not set
|
|
+# CONFIG_SCSI_SRP_ATTRS is not set
|
|
+CONFIG_SCSI_LOWLEVEL=y
|
|
+# CONFIG_ISCSI_TCP is not set
|
|
+# CONFIG_SCSI_DEBUG is not set
|
|
+# CONFIG_ATA is not set
|
|
+# CONFIG_MD is not set
|
|
+# CONFIG_NETDEVICES is not set
|
|
+# CONFIG_ISDN is not set
|
|
+# CONFIG_PHONE is not set
|
|
+
|
|
+#
|
|
+# Input device support
|
|
+#
|
|
+CONFIG_INPUT=y
|
|
+# CONFIG_INPUT_FF_MEMLESS is not set
|
|
+# CONFIG_INPUT_POLLDEV is not set
|
|
+
|
|
+#
|
|
+# Userland interfaces
|
|
+#
|
|
+CONFIG_INPUT_MOUSEDEV=y
|
|
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
|
+# CONFIG_INPUT_JOYDEV is not set
|
|
+CONFIG_INPUT_EVDEV=y
|
|
+# CONFIG_INPUT_EVBUG is not set
|
|
+
|
|
+#
|
|
+# Input Device Drivers
|
|
+#
|
|
+# CONFIG_INPUT_KEYBOARD is not set
|
|
+# CONFIG_INPUT_MOUSE is not set
|
|
+# CONFIG_INPUT_JOYSTICK is not set
|
|
+# CONFIG_INPUT_TABLET is not set
|
|
+# CONFIG_INPUT_TOUCHSCREEN is not set
|
|
+# CONFIG_INPUT_MISC is not set
|
|
+
|
|
+#
|
|
+# Hardware I/O ports
|
|
+#
|
|
+CONFIG_SERIO=y
|
|
+# CONFIG_SERIO_I8042 is not set
|
|
+CONFIG_SERIO_SERPORT=y
|
|
+# CONFIG_SERIO_LIBPS2 is not set
|
|
+# CONFIG_SERIO_RAW is not set
|
|
+# CONFIG_GAMEPORT is not set
|
|
+
|
|
+#
|
|
+# Character devices
|
|
+#
|
|
+CONFIG_VT=y
|
|
+CONFIG_VT_CONSOLE=y
|
|
+CONFIG_HW_CONSOLE=y
|
|
+CONFIG_VT_HW_CONSOLE_BINDING=y
|
|
+# CONFIG_SERIAL_NONSTANDARD is not set
|
|
+
|
|
+#
|
|
+# Serial drivers
|
|
+#
|
|
+CONFIG_SERIAL_8250=y
|
|
+CONFIG_SERIAL_8250_CONSOLE=y
|
|
+CONFIG_SERIAL_8250_PNP=y
|
|
+CONFIG_SERIAL_8250_NR_UARTS=2
|
|
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
|
|
+# CONFIG_SERIAL_8250_EXTENDED is not set
|
|
+
|
|
+#
|
|
+# Non-8250 serial port support
|
|
+#
|
|
+CONFIG_SERIAL_CORE=y
|
|
+CONFIG_SERIAL_CORE_CONSOLE=y
|
|
+CONFIG_UNIX98_PTYS=y
|
|
+CONFIG_LEGACY_PTYS=y
|
|
+CONFIG_LEGACY_PTY_COUNT=2
|
|
+# CONFIG_IPMI_HANDLER is not set
|
|
+# CONFIG_HW_RANDOM is not set
|
|
+# CONFIG_RTC is not set
|
|
+# CONFIG_RTC_PCF8563 is not set
|
|
+CONFIG_RTC_JZ=y
|
|
+# CONFIG_R3964 is not set
|
|
+# CONFIG_RAW_DRIVER is not set
|
|
+# CONFIG_TCG_TPM is not set
|
|
+
|
|
+#
|
|
+# JZSOC char device support
|
|
+#
|
|
+CONFIG_JZCHAR=y
|
|
+# CONFIG_JZ_CIM is not set
|
|
+# CONFIG_JZ_TPANEL_ATA2508 is not set
|
|
+CONFIG_JZ_TPANEL=y
|
|
+CONFIG_JZ_SADC=y
|
|
+# CONFIG_JZ_TPANEL_AK4182 is not set
|
|
+# CONFIG_JZ_TPANEL_UCB1400 is not set
|
|
+# CONFIG_JZ_TPANEL_WM9712 is not set
|
|
+CONFIG_JZ_UDC_HOTPLUG=y
|
|
+CONFIG_JZ_POWEROFF=y
|
|
+# CONFIG_JZ_OW is not set
|
|
+# CONFIG_I2C is not set
|
|
+
|
|
+#
|
|
+# SPI support
|
|
+#
|
|
+# CONFIG_SPI is not set
|
|
+# CONFIG_SPI_MASTER is not set
|
|
+# CONFIG_W1 is not set
|
|
+# CONFIG_POWER_SUPPLY is not set
|
|
+# CONFIG_HWMON is not set
|
|
+CONFIG_WATCHDOG=y
|
|
+# CONFIG_WATCHDOG_NOWAYOUT is not set
|
|
+
|
|
+#
|
|
+# Watchdog Device Drivers
|
|
+#
|
|
+CONFIG_JZ_WDT=y
|
|
+# CONFIG_SOFT_WATCHDOG is not set
|
|
+
|
|
+#
|
|
+# USB-based Watchdog Cards
|
|
+#
|
|
+# CONFIG_USBPCWATCHDOG is not set
|
|
+
|
|
+#
|
|
+# Sonics Silicon Backplane
|
|
+#
|
|
+CONFIG_SSB_POSSIBLE=y
|
|
+# CONFIG_SSB is not set
|
|
+
|
|
+#
|
|
+# Multifunction device drivers
|
|
+#
|
|
+# CONFIG_MFD_SM501 is not set
|
|
+
|
|
+#
|
|
+# Multimedia devices
|
|
+#
|
|
+CONFIG_VIDEO_DEV=y
|
|
+CONFIG_VIDEO_V4L1=y
|
|
+CONFIG_VIDEO_V4L1_COMPAT=y
|
|
+CONFIG_VIDEO_V4L2=y
|
|
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
|
|
+# CONFIG_VIDEO_ADV_DEBUG is not set
|
|
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
|
|
+# CONFIG_VIDEO_VIVI is not set
|
|
+# CONFIG_VIDEO_CPIA is not set
|
|
+# CONFIG_VIDEO_CPIA2 is not set
|
|
+CONFIG_VIDEO_JZ_CIM=y
|
|
+CONFIG_VIDEO_JZ_SENSOR=y
|
|
+CONFIG_V4L_USB_DRIVERS=y
|
|
+# CONFIG_USB_VICAM is not set
|
|
+# CONFIG_USB_IBMCAM is not set
|
|
+# CONFIG_USB_KONICAWC is not set
|
|
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
|
|
+# CONFIG_USB_ET61X251 is not set
|
|
+# CONFIG_USB_OV511 is not set
|
|
+# CONFIG_USB_SE401 is not set
|
|
+# CONFIG_USB_SN9C102 is not set
|
|
+# CONFIG_USB_STV680 is not set
|
|
+# CONFIG_USB_ZC0301 is not set
|
|
+# CONFIG_USB_PWC is not set
|
|
+# CONFIG_USB_ZR364XX is not set
|
|
+CONFIG_RADIO_ADAPTERS=y
|
|
+# CONFIG_USB_DSBR is not set
|
|
+# CONFIG_DVB_CORE is not set
|
|
+# CONFIG_DAB is not set
|
|
+
|
|
+#
|
|
+# Graphics support
|
|
+#
|
|
+# CONFIG_VGASTATE is not set
|
|
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
|
+CONFIG_FB=y
|
|
+# CONFIG_FIRMWARE_EDID is not set
|
|
+# CONFIG_FB_DDC is not set
|
|
+CONFIG_FB_CFB_FILLRECT=y
|
|
+CONFIG_FB_CFB_COPYAREA=y
|
|
+CONFIG_FB_CFB_IMAGEBLIT=y
|
|
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
|
|
+# CONFIG_FB_SYS_FILLRECT is not set
|
|
+# CONFIG_FB_SYS_COPYAREA is not set
|
|
+# CONFIG_FB_SYS_IMAGEBLIT is not set
|
|
+# CONFIG_FB_SYS_FOPS is not set
|
|
+CONFIG_FB_DEFERRED_IO=y
|
|
+# CONFIG_FB_SVGALIB is not set
|
|
+# CONFIG_FB_MACMODES is not set
|
|
+# CONFIG_FB_BACKLIGHT is not set
|
|
+# CONFIG_FB_MODE_HELPERS is not set
|
|
+# CONFIG_FB_TILEBLITTING is not set
|
|
+
|
|
+#
|
|
+# Frame buffer hardware drivers
|
|
+#
|
|
+CONFIG_FB_JZSOC=y
|
|
+# CONFIG_FB_JZ4740_SLCD is not set
|
|
+CONFIG_FB_JZLCD_4730_4740=y
|
|
+CONFIG_JZLCD_FRAMEBUFFER_MAX=1
|
|
+# CONFIG_JZLCD_FRAMEBUFFER_ROTATE_SUPPORT is not set
|
|
+# CONFIG_JZLCD_SHARP_LQ035Q7 is not set
|
|
+# CONFIG_JZLCD_SAMSUNG_LTS350Q1 is not set
|
|
+# CONFIG_JZLCD_SAMSUNG_LTV350QVF04 is not set
|
|
+# CONFIG_JZLCD_SAMSUNG_LTP400WQF01 is not set
|
|
+CONFIG_JZLCD_SAMSUNG_LTP400WQF02=y
|
|
+# CONFIG_JZLCD_AUO_A030FL01_V1 is not set
|
|
+# CONFIG_JZLCD_TRULY_TFTG320240DTSW is not set
|
|
+# CONFIG_JZLCD_TRULY_TFTG320240DTSW_SERIAL is not set
|
|
+# CONFIG_JZLCD_TRULY_TFTG240320UTSW_63W_E is not set
|
|
+# CONFIG_JZLCD_FOXCONN_PT035TN01 is not set
|
|
+# CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL is not set
|
|
+# CONFIG_JZLCD_TOSHIBA_LTM084P363 is not set
|
|
+# CONFIG_JZLCD_HYNIX_HT10X21 is not set
|
|
+# CONFIG_JZLCD_INNOLUX_AT080TN42 is not set
|
|
+# CONFIG_JZLCD_CSTN_800x600 is not set
|
|
+# CONFIG_JZLCD_CSTN_320x240 is not set
|
|
+# CONFIG_JZLCD_MSTN_480x320 is not set
|
|
+# CONFIG_JZLCD_MSTN_320x240 is not set
|
|
+# CONFIG_JZLCD_MSTN_240x128 is not set
|
|
+# CONFIG_FB_S1D13XXX is not set
|
|
+# CONFIG_FB_VIRTUAL is not set
|
|
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Display device support
|
|
+#
|
|
+# CONFIG_DISPLAY_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Console display driver support
|
|
+#
|
|
+# CONFIG_VGA_CONSOLE is not set
|
|
+CONFIG_DUMMY_CONSOLE=y
|
|
+CONFIG_FRAMEBUFFER_CONSOLE=y
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE_CURSOR_FLASH is not set
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
|
|
+CONFIG_FONTS=y
|
|
+CONFIG_FONT_8x8=y
|
|
+CONFIG_FONT_8x16=y
|
|
+# CONFIG_FONT_6x11 is not set
|
|
+# CONFIG_FONT_7x14 is not set
|
|
+# CONFIG_FONT_PEARL_8x8 is not set
|
|
+# CONFIG_FONT_ACORN_8x8 is not set
|
|
+# CONFIG_FONT_MINI_4x6 is not set
|
|
+# CONFIG_FONT_SUN8x16 is not set
|
|
+# CONFIG_FONT_SUN12x22 is not set
|
|
+# CONFIG_FONT_10x18 is not set
|
|
+CONFIG_LOGO=y
|
|
+CONFIG_LOGO_LINUX_MONO=y
|
|
+CONFIG_LOGO_LINUX_VGA16=y
|
|
+CONFIG_LOGO_LINUX_CLUT224=y
|
|
+
|
|
+#
|
|
+# Sound
|
|
+#
|
|
+CONFIG_SOUND=y
|
|
+
|
|
+#
|
|
+# Advanced Linux Sound Architecture
|
|
+#
|
|
+CONFIG_SND=y
|
|
+CONFIG_SND_TIMER=y
|
|
+CONFIG_SND_PCM=y
|
|
+# CONFIG_SND_SEQUENCER is not set
|
|
+CONFIG_SND_OSSEMUL=y
|
|
+CONFIG_SND_MIXER_OSS=y
|
|
+CONFIG_SND_PCM_OSS=y
|
|
+CONFIG_SND_PCM_OSS_PLUGINS=y
|
|
+# CONFIG_SND_DYNAMIC_MINORS is not set
|
|
+CONFIG_SND_SUPPORT_OLD_API=y
|
|
+CONFIG_SND_VERBOSE_PROCFS=y
|
|
+# CONFIG_SND_VERBOSE_PRINTK is not set
|
|
+# CONFIG_SND_DEBUG is not set
|
|
+
|
|
+#
|
|
+# Generic devices
|
|
+#
|
|
+# CONFIG_SND_DUMMY is not set
|
|
+# CONFIG_SND_MTPAV is not set
|
|
+# CONFIG_SND_SERIAL_U16550 is not set
|
|
+# CONFIG_SND_MPU401 is not set
|
|
+
|
|
+#
|
|
+# ALSA MIPS devices
|
|
+#
|
|
+
|
|
+#
|
|
+# USB devices
|
|
+#
|
|
+# CONFIG_SND_USB_AUDIO is not set
|
|
+# CONFIG_SND_USB_CAIAQ is not set
|
|
+
|
|
+#
|
|
+# System on Chip audio support
|
|
+#
|
|
+CONFIG_SND_SOC=y
|
|
+
|
|
+#
|
|
+# SoC Audio support for SuperH
|
|
+#
|
|
+
|
|
+#
|
|
+# Open Sound System
|
|
+#
|
|
+# CONFIG_SOUND_PRIME is not set
|
|
+CONFIG_HID_SUPPORT=y
|
|
+CONFIG_HID=y
|
|
+# CONFIG_HID_DEBUG is not set
|
|
+# CONFIG_HIDRAW is not set
|
|
+
|
|
+#
|
|
+# USB Input Devices
|
|
+#
|
|
+CONFIG_USB_HID=y
|
|
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
|
|
+# CONFIG_HID_FF is not set
|
|
+# CONFIG_USB_HIDDEV is not set
|
|
+CONFIG_USB_SUPPORT=y
|
|
+CONFIG_USB_ARCH_HAS_HCD=y
|
|
+CONFIG_USB_ARCH_HAS_OHCI=y
|
|
+# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
+CONFIG_USB=y
|
|
+# CONFIG_USB_DEBUG is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous USB options
|
|
+#
|
|
+# CONFIG_USB_DEVICEFS is not set
|
|
+CONFIG_USB_DEVICE_CLASS=y
|
|
+# CONFIG_USB_DYNAMIC_MINORS is not set
|
|
+# CONFIG_USB_SUSPEND is not set
|
|
+# CONFIG_USB_PERSIST is not set
|
|
+# CONFIG_USB_OTG is not set
|
|
+
|
|
+#
|
|
+# USB Host Controller Drivers
|
|
+#
|
|
+# CONFIG_USB_ISP116X_HCD is not set
|
|
+CONFIG_USB_OHCI_HCD=y
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
|
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
|
+# CONFIG_USB_SL811_HCD is not set
|
|
+# CONFIG_USB_R8A66597_HCD is not set
|
|
+
|
|
+#
|
|
+# USB Device Class drivers
|
|
+#
|
|
+# CONFIG_USB_ACM is not set
|
|
+# CONFIG_USB_PRINTER is not set
|
|
+
|
|
+#
|
|
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
+#
|
|
+
|
|
+#
|
|
+# may also be needed; see USB_STORAGE Help for more information
|
|
+#
|
|
+CONFIG_USB_STORAGE=y
|
|
+# CONFIG_USB_STORAGE_DEBUG is not set
|
|
+# CONFIG_USB_STORAGE_DATAFAB is not set
|
|
+# CONFIG_USB_STORAGE_FREECOM is not set
|
|
+# CONFIG_USB_STORAGE_ISD200 is not set
|
|
+# CONFIG_USB_STORAGE_DPCM is not set
|
|
+# CONFIG_USB_STORAGE_USBAT is not set
|
|
+# CONFIG_USB_STORAGE_SDDR09 is not set
|
|
+# CONFIG_USB_STORAGE_SDDR55 is not set
|
|
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
|
|
+# CONFIG_USB_STORAGE_ALAUDA is not set
|
|
+# CONFIG_USB_STORAGE_KARMA is not set
|
|
+# CONFIG_USB_LIBUSUAL is not set
|
|
+
|
|
+#
|
|
+# USB Imaging devices
|
|
+#
|
|
+# CONFIG_USB_MDC800 is not set
|
|
+# CONFIG_USB_MICROTEK is not set
|
|
+CONFIG_USB_MON=y
|
|
+
|
|
+#
|
|
+# USB port drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Serial Converter support
|
|
+#
|
|
+# CONFIG_USB_SERIAL is not set
|
|
+
|
|
+#
|
|
+# USB Miscellaneous drivers
|
|
+#
|
|
+# CONFIG_USB_EMI62 is not set
|
|
+# CONFIG_USB_EMI26 is not set
|
|
+# CONFIG_USB_ADUTUX is not set
|
|
+# CONFIG_USB_AUERSWALD is not set
|
|
+# CONFIG_USB_RIO500 is not set
|
|
+# CONFIG_USB_LEGOTOWER is not set
|
|
+# CONFIG_USB_LCD is not set
|
|
+# CONFIG_USB_BERRY_CHARGE is not set
|
|
+# CONFIG_USB_LED is not set
|
|
+# CONFIG_USB_CYPRESS_CY7C63 is not set
|
|
+# CONFIG_USB_CYTHERM is not set
|
|
+# CONFIG_USB_PHIDGET is not set
|
|
+# CONFIG_USB_IDMOUSE is not set
|
|
+# CONFIG_USB_FTDI_ELAN is not set
|
|
+# CONFIG_USB_APPLEDISPLAY is not set
|
|
+# CONFIG_USB_LD is not set
|
|
+# CONFIG_USB_TRANCEVIBRATOR is not set
|
|
+# CONFIG_USB_IOWARRIOR is not set
|
|
+
|
|
+#
|
|
+# USB DSL modem support
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Gadget Support
|
|
+#
|
|
+CONFIG_USB_GADGET=m
|
|
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
|
+# CONFIG_USB_GADGET_DEBUG_FS is not set
|
|
+CONFIG_USB_GADGET_SELECTED=y
|
|
+CONFIG_USB_GADGET_JZ4740=y
|
|
+CONFIG_USB_JZ4740=m
|
|
+# CONFIG_USB_GADGET_JZ4730 is not set
|
|
+# CONFIG_USB_GADGET_AMD5536UDC is not set
|
|
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
|
|
+# CONFIG_USB_GADGET_FSL_USB2 is not set
|
|
+# CONFIG_USB_GADGET_NET2280 is not set
|
|
+# CONFIG_USB_GADGET_PXA2XX is not set
|
|
+# CONFIG_USB_GADGET_M66592 is not set
|
|
+# CONFIG_USB_GADGET_GOKU is not set
|
|
+# CONFIG_USB_GADGET_LH7A40X is not set
|
|
+# CONFIG_USB_GADGET_OMAP is not set
|
|
+# CONFIG_USB_GADGET_S3C2410 is not set
|
|
+# CONFIG_USB_GADGET_AT91 is not set
|
|
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
|
|
+CONFIG_USB_GADGET_DUALSPEED=y
|
|
+# CONFIG_USB_ZERO is not set
|
|
+# CONFIG_USB_ETH is not set
|
|
+# CONFIG_USB_GADGETFS is not set
|
|
+CONFIG_USB_FILE_STORAGE=m
|
|
+CONFIG_USB_FILE_STORAGE_TEST=y
|
|
+# CONFIG_USB_G_SERIAL is not set
|
|
+# CONFIG_USB_MIDI_GADGET is not set
|
|
+CONFIG_MMC=y
|
|
+# CONFIG_MMC_DEBUG is not set
|
|
+# CONFIG_MMC_UNSAFE_RESUME is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Card Drivers
|
|
+#
|
|
+CONFIG_MMC_BLOCK=y
|
|
+CONFIG_MMC_BLOCK_BOUNCE=y
|
|
+# CONFIG_SDIO_UART is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Host Controller Drivers
|
|
+#
|
|
+CONFIG_MMC_JZ=y
|
|
+CONFIG_JZ_MMC_BUS_4=y
|
|
+# CONFIG_JZ_MMC_BUS_1 is not set
|
|
+# CONFIG_NEW_LEDS is not set
|
|
+CONFIG_RTC_LIB=y
|
|
+# CONFIG_RTC_CLASS is not set
|
|
+
|
|
+#
|
|
+# Userspace I/O
|
|
+#
|
|
+# CONFIG_UIO is not set
|
|
+
|
|
+#
|
|
+# File systems
|
|
+#
|
|
+CONFIG_EXT2_FS=y
|
|
+CONFIG_EXT2_FS_XATTR=y
|
|
+# CONFIG_EXT2_FS_POSIX_ACL is not set
|
|
+# CONFIG_EXT2_FS_SECURITY is not set
|
|
+# CONFIG_EXT2_FS_XIP is not set
|
|
+# CONFIG_EXT3_FS is not set
|
|
+# CONFIG_EXT4DEV_FS is not set
|
|
+CONFIG_FS_MBCACHE=y
|
|
+# CONFIG_REISERFS_FS is not set
|
|
+# CONFIG_JFS_FS is not set
|
|
+CONFIG_FS_POSIX_ACL=y
|
|
+# CONFIG_XFS_FS is not set
|
|
+# CONFIG_GFS2_FS is not set
|
|
+# CONFIG_OCFS2_FS is not set
|
|
+CONFIG_MINIX_FS=y
|
|
+# CONFIG_ROMFS_FS is not set
|
|
+CONFIG_INOTIFY=y
|
|
+CONFIG_INOTIFY_USER=y
|
|
+# CONFIG_QUOTA is not set
|
|
+CONFIG_DNOTIFY=y
|
|
+# CONFIG_AUTOFS_FS is not set
|
|
+# CONFIG_AUTOFS4_FS is not set
|
|
+# CONFIG_FUSE_FS is not set
|
|
+
|
|
+#
|
|
+# CD-ROM/DVD Filesystems
|
|
+#
|
|
+# CONFIG_ISO9660_FS is not set
|
|
+# CONFIG_UDF_FS is not set
|
|
+
|
|
+#
|
|
+# DOS/FAT/NT Filesystems
|
|
+#
|
|
+CONFIG_FAT_FS=y
|
|
+CONFIG_MSDOS_FS=y
|
|
+CONFIG_VFAT_FS=y
|
|
+CONFIG_FAT_DEFAULT_CODEPAGE=437
|
|
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
|
+# CONFIG_NTFS_FS is not set
|
|
+
|
|
+#
|
|
+# Pseudo filesystems
|
|
+#
|
|
+CONFIG_PROC_FS=y
|
|
+CONFIG_PROC_KCORE=y
|
|
+CONFIG_PROC_SYSCTL=y
|
|
+CONFIG_SYSFS=y
|
|
+CONFIG_TMPFS=y
|
|
+# CONFIG_TMPFS_POSIX_ACL is not set
|
|
+# CONFIG_HUGETLB_PAGE is not set
|
|
+# CONFIG_CONFIGFS_FS is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous filesystems
|
|
+#
|
|
+# CONFIG_ADFS_FS is not set
|
|
+# CONFIG_AFFS_FS is not set
|
|
+# CONFIG_HFS_FS is not set
|
|
+# CONFIG_HFSPLUS_FS is not set
|
|
+# CONFIG_BEFS_FS is not set
|
|
+# CONFIG_BFS_FS is not set
|
|
+# CONFIG_EFS_FS is not set
|
|
+# CONFIG_JFFS2_FS is not set
|
|
+CONFIG_UBIFS_FS=m
|
|
+# CONFIG_UBIFS_FS_XATTR is not set
|
|
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
|
|
+CONFIG_UBIFS_FS_LZO=y
|
|
+CONFIG_UBIFS_FS_ZLIB=y
|
|
+CONFIG_UBIFS_FS_DEBUG=y
|
|
+CONFIG_UBIFS_FS_DEBUG_MSG_LVL=0
|
|
+# CONFIG_UBIFS_FS_DEBUG_CHKS is not set
|
|
+# CONFIG_CRAMFS is not set
|
|
+# CONFIG_VXFS_FS is not set
|
|
+# CONFIG_HPFS_FS is not set
|
|
+# CONFIG_QNX4FS_FS is not set
|
|
+# CONFIG_SYSV_FS is not set
|
|
+# CONFIG_UFS_FS is not set
|
|
+CONFIG_NETWORK_FILESYSTEMS=y
|
|
+CONFIG_NFS_FS=y
|
|
+CONFIG_NFS_V3=y
|
|
+CONFIG_NFS_V3_ACL=y
|
|
+CONFIG_NFS_V4=y
|
|
+CONFIG_NFS_DIRECTIO=y
|
|
+# CONFIG_NFSD is not set
|
|
+CONFIG_ROOT_NFS=y
|
|
+CONFIG_LOCKD=y
|
|
+CONFIG_LOCKD_V4=y
|
|
+CONFIG_NFS_ACL_SUPPORT=y
|
|
+CONFIG_NFS_COMMON=y
|
|
+CONFIG_SUNRPC=y
|
|
+CONFIG_SUNRPC_GSS=y
|
|
+# CONFIG_SUNRPC_BIND34 is not set
|
|
+CONFIG_RPCSEC_GSS_KRB5=y
|
|
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
|
+# CONFIG_SMB_FS is not set
|
|
+# CONFIG_CIFS is not set
|
|
+# CONFIG_NCP_FS is not set
|
|
+# CONFIG_CODA_FS is not set
|
|
+# CONFIG_AFS_FS is not set
|
|
+
|
|
+#
|
|
+# Partition Types
|
|
+#
|
|
+CONFIG_PARTITION_ADVANCED=y
|
|
+# CONFIG_ACORN_PARTITION is not set
|
|
+# CONFIG_OSF_PARTITION is not set
|
|
+# CONFIG_AMIGA_PARTITION is not set
|
|
+# CONFIG_ATARI_PARTITION is not set
|
|
+# CONFIG_MAC_PARTITION is not set
|
|
+CONFIG_MSDOS_PARTITION=y
|
|
+# CONFIG_BSD_DISKLABEL is not set
|
|
+# CONFIG_MINIX_SUBPARTITION is not set
|
|
+# CONFIG_SOLARIS_X86_PARTITION is not set
|
|
+# CONFIG_UNIXWARE_DISKLABEL is not set
|
|
+# CONFIG_LDM_PARTITION is not set
|
|
+# CONFIG_SGI_PARTITION is not set
|
|
+# CONFIG_ULTRIX_PARTITION is not set
|
|
+# CONFIG_SUN_PARTITION is not set
|
|
+# CONFIG_KARMA_PARTITION is not set
|
|
+# CONFIG_EFI_PARTITION is not set
|
|
+# CONFIG_SYSV68_PARTITION is not set
|
|
+CONFIG_NLS=y
|
|
+CONFIG_NLS_DEFAULT="iso8859-1"
|
|
+CONFIG_NLS_CODEPAGE_437=y
|
|
+# CONFIG_NLS_CODEPAGE_737 is not set
|
|
+# CONFIG_NLS_CODEPAGE_775 is not set
|
|
+# CONFIG_NLS_CODEPAGE_850 is not set
|
|
+# CONFIG_NLS_CODEPAGE_852 is not set
|
|
+# CONFIG_NLS_CODEPAGE_855 is not set
|
|
+# CONFIG_NLS_CODEPAGE_857 is not set
|
|
+# CONFIG_NLS_CODEPAGE_860 is not set
|
|
+# CONFIG_NLS_CODEPAGE_861 is not set
|
|
+# CONFIG_NLS_CODEPAGE_862 is not set
|
|
+# CONFIG_NLS_CODEPAGE_863 is not set
|
|
+# CONFIG_NLS_CODEPAGE_864 is not set
|
|
+# CONFIG_NLS_CODEPAGE_865 is not set
|
|
+# CONFIG_NLS_CODEPAGE_866 is not set
|
|
+# CONFIG_NLS_CODEPAGE_869 is not set
|
|
+CONFIG_NLS_CODEPAGE_936=y
|
|
+# CONFIG_NLS_CODEPAGE_950 is not set
|
|
+# CONFIG_NLS_CODEPAGE_932 is not set
|
|
+# CONFIG_NLS_CODEPAGE_949 is not set
|
|
+# CONFIG_NLS_CODEPAGE_874 is not set
|
|
+# CONFIG_NLS_ISO8859_8 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1250 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1251 is not set
|
|
+CONFIG_NLS_ASCII=y
|
|
+CONFIG_NLS_ISO8859_1=y
|
|
+# CONFIG_NLS_ISO8859_2 is not set
|
|
+# CONFIG_NLS_ISO8859_3 is not set
|
|
+# CONFIG_NLS_ISO8859_4 is not set
|
|
+# CONFIG_NLS_ISO8859_5 is not set
|
|
+# CONFIG_NLS_ISO8859_6 is not set
|
|
+# CONFIG_NLS_ISO8859_7 is not set
|
|
+# CONFIG_NLS_ISO8859_9 is not set
|
|
+# CONFIG_NLS_ISO8859_13 is not set
|
|
+# CONFIG_NLS_ISO8859_14 is not set
|
|
+# CONFIG_NLS_ISO8859_15 is not set
|
|
+# CONFIG_NLS_KOI8_R is not set
|
|
+# CONFIG_NLS_KOI8_U is not set
|
|
+# CONFIG_NLS_UTF8 is not set
|
|
+# CONFIG_DLM is not set
|
|
+
|
|
+#
|
|
+# Yaffs2 Filesystems
|
|
+#
|
|
+CONFIG_YAFFS_FS=y
|
|
+CONFIG_YAFFS_YAFFS1=y
|
|
+# CONFIG_YAFFS_DOES_ECC is not set
|
|
+CONFIG_YAFFS_YAFFS2=y
|
|
+CONFIG_YAFFS_AUTO_YAFFS2=y
|
|
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
|
|
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
|
|
+CONFIG_YAFFS_DISABLE_CHUNK_ERASED_CHECK=y
|
|
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
|
|
+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
|
|
+CONFIG_INSTRUMENTATION=y
|
|
+# CONFIG_PROFILING is not set
|
|
+# CONFIG_MARKERS is not set
|
|
+
|
|
+#
|
|
+# Kernel hacking
|
|
+#
|
|
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
+# CONFIG_PRINTK_TIME is not set
|
|
+CONFIG_ENABLE_WARN_DEPRECATED=y
|
|
+CONFIG_ENABLE_MUST_CHECK=y
|
|
+CONFIG_MAGIC_SYSRQ=y
|
|
+# CONFIG_UNUSED_SYMBOLS is not set
|
|
+CONFIG_DEBUG_FS=y
|
|
+# CONFIG_HEADERS_CHECK is not set
|
|
+# CONFIG_DEBUG_KERNEL is not set
|
|
+# CONFIG_SAMPLES is not set
|
|
+CONFIG_CMDLINE=""
|
|
+
|
|
+#
|
|
+# Security options
|
|
+#
|
|
+# CONFIG_KEYS is not set
|
|
+# CONFIG_SECURITY is not set
|
|
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
|
+CONFIG_CRYPTO=y
|
|
+CONFIG_CRYPTO_ALGAPI=y
|
|
+CONFIG_CRYPTO_BLKCIPHER=y
|
|
+CONFIG_CRYPTO_MANAGER=y
|
|
+# CONFIG_CRYPTO_HMAC is not set
|
|
+# CONFIG_CRYPTO_XCBC is not set
|
|
+# CONFIG_CRYPTO_NULL is not set
|
|
+# CONFIG_CRYPTO_MD4 is not set
|
|
+CONFIG_CRYPTO_MD5=y
|
|
+# CONFIG_CRYPTO_SHA1 is not set
|
|
+# CONFIG_CRYPTO_SHA256 is not set
|
|
+# CONFIG_CRYPTO_SHA512 is not set
|
|
+# CONFIG_CRYPTO_WP512 is not set
|
|
+# CONFIG_CRYPTO_TGR192 is not set
|
|
+# CONFIG_CRYPTO_GF128MUL is not set
|
|
+# CONFIG_CRYPTO_ECB is not set
|
|
+CONFIG_CRYPTO_CBC=y
|
|
+# CONFIG_CRYPTO_PCBC is not set
|
|
+# CONFIG_CRYPTO_LRW is not set
|
|
+# CONFIG_CRYPTO_XTS is not set
|
|
+# CONFIG_CRYPTO_CRYPTD is not set
|
|
+CONFIG_CRYPTO_DES=y
|
|
+# CONFIG_CRYPTO_FCRYPT is not set
|
|
+# CONFIG_CRYPTO_BLOWFISH is not set
|
|
+# CONFIG_CRYPTO_TWOFISH is not set
|
|
+# CONFIG_CRYPTO_SERPENT is not set
|
|
+# CONFIG_CRYPTO_AES is not set
|
|
+# CONFIG_CRYPTO_CAST5 is not set
|
|
+# CONFIG_CRYPTO_CAST6 is not set
|
|
+# CONFIG_CRYPTO_TEA is not set
|
|
+# CONFIG_CRYPTO_ARC4 is not set
|
|
+# CONFIG_CRYPTO_KHAZAD is not set
|
|
+# CONFIG_CRYPTO_ANUBIS is not set
|
|
+# CONFIG_CRYPTO_SEED is not set
|
|
+CONFIG_CRYPTO_DEFLATE=m
|
|
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
|
|
+# CONFIG_CRYPTO_CRC32C is not set
|
|
+# CONFIG_CRYPTO_CAMELLIA is not set
|
|
+# CONFIG_CRYPTO_TEST is not set
|
|
+# CONFIG_CRYPTO_AUTHENC is not set
|
|
+CONFIG_CRYPTO_LZO=m
|
|
+CONFIG_CRYPTO_HW=y
|
|
+
|
|
+#
|
|
+# Library routines
|
|
+#
|
|
+CONFIG_BITREVERSE=y
|
|
+# CONFIG_CRC_CCITT is not set
|
|
+CONFIG_CRC16=m
|
|
+# CONFIG_CRC_ITU_T is not set
|
|
+CONFIG_CRC32=y
|
|
+# CONFIG_CRC7 is not set
|
|
+# CONFIG_LIBCRC32C is not set
|
|
+CONFIG_ZLIB_INFLATE=m
|
|
+CONFIG_ZLIB_DEFLATE=m
|
|
+CONFIG_LZO_COMPRESS=m
|
|
+CONFIG_LZO_DECOMPRESS=m
|
|
+CONFIG_PLIST=y
|
|
+CONFIG_HAS_IOMEM=y
|
|
+CONFIG_HAS_IOPORT=y
|
|
+CONFIG_HAS_DMA=y
|
|
--- linux-2.6.24.7.old/arch/mips/configs/lyra_defconfig 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/configs/lyra_defconfig 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,981 @@
|
|
+#
|
|
+# Automatically generated make config: don't edit
|
|
+# Linux kernel version: 2.6.24.3
|
|
+# Thu Jun 12 13:53:57 2008
|
|
+#
|
|
+CONFIG_MIPS=y
|
|
+
|
|
+#
|
|
+# Machine selection
|
|
+#
|
|
+# CONFIG_JZ4730_PMP is not set
|
|
+# CONFIG_JZ4740_PAVO is not set
|
|
+# CONFIG_JZ4740_LEO is not set
|
|
+CONFIG_JZ4740_LYRA=y
|
|
+# CONFIG_JZ4725_DIPPER is not set
|
|
+# CONFIG_JZ4720_VIRGO is not set
|
|
+# CONFIG_JZ4750_FUWA is not set
|
|
+# CONFIG_MACH_ALCHEMY is not set
|
|
+# CONFIG_BASLER_EXCITE is not set
|
|
+# CONFIG_BCM47XX is not set
|
|
+# CONFIG_MIPS_COBALT is not set
|
|
+# CONFIG_MACH_DECSTATION is not set
|
|
+# CONFIG_MACH_JAZZ is not set
|
|
+# CONFIG_LASAT is not set
|
|
+# CONFIG_LEMOTE_FULONG is not set
|
|
+# CONFIG_MIPS_ATLAS is not set
|
|
+# CONFIG_MIPS_MALTA is not set
|
|
+# CONFIG_MIPS_SEAD is not set
|
|
+# CONFIG_MIPS_SIM is not set
|
|
+# CONFIG_MARKEINS is not set
|
|
+# CONFIG_MACH_VR41XX is not set
|
|
+# CONFIG_PNX8550_JBS is not set
|
|
+# CONFIG_PNX8550_STB810 is not set
|
|
+# CONFIG_PMC_MSP is not set
|
|
+# CONFIG_PMC_YOSEMITE is not set
|
|
+# CONFIG_QEMU is not set
|
|
+# CONFIG_SGI_IP22 is not set
|
|
+# CONFIG_SGI_IP27 is not set
|
|
+# CONFIG_SGI_IP32 is not set
|
|
+# CONFIG_SIBYTE_CRHINE is not set
|
|
+# CONFIG_SIBYTE_CARMEL is not set
|
|
+# CONFIG_SIBYTE_CRHONE is not set
|
|
+# CONFIG_SIBYTE_RHONE is not set
|
|
+# CONFIG_SIBYTE_SWARM is not set
|
|
+# CONFIG_SIBYTE_LITTLESUR is not set
|
|
+# CONFIG_SIBYTE_SENTOSA is not set
|
|
+# CONFIG_SIBYTE_PTSWARM is not set
|
|
+# CONFIG_SIBYTE_BIGSUR is not set
|
|
+# CONFIG_SNI_RM is not set
|
|
+# CONFIG_TOSHIBA_JMR3927 is not set
|
|
+# CONFIG_TOSHIBA_RBTX4927 is not set
|
|
+# CONFIG_TOSHIBA_RBTX4938 is not set
|
|
+# CONFIG_WR_PPMC is not set
|
|
+CONFIG_SOC_JZ4740=y
|
|
+CONFIG_JZSOC=y
|
|
+CONFIG_JZRISC=y
|
|
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
|
+CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|
+CONFIG_GENERIC_HWEIGHT=y
|
|
+CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
+CONFIG_GENERIC_CLOCKEVENTS=y
|
|
+CONFIG_GENERIC_TIME=y
|
|
+CONFIG_GENERIC_CMOS_UPDATE=y
|
|
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
|
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
|
|
+CONFIG_DMA_NONCOHERENT=y
|
|
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
|
+# CONFIG_HOTPLUG_CPU is not set
|
|
+# CONFIG_NO_IOPORT is not set
|
|
+# CONFIG_CPU_BIG_ENDIAN is not set
|
|
+CONFIG_CPU_LITTLE_ENDIAN=y
|
|
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
|
+CONFIG_MIPS_L1_CACHE_SHIFT=5
|
|
+
|
|
+#
|
|
+# CPU selection
|
|
+#
|
|
+# CONFIG_CPU_LOONGSON2 is not set
|
|
+CONFIG_CPU_MIPS32_R1=y
|
|
+# CONFIG_CPU_MIPS32_R2 is not set
|
|
+# CONFIG_CPU_MIPS64_R1 is not set
|
|
+# CONFIG_CPU_MIPS64_R2 is not set
|
|
+# CONFIG_CPU_R3000 is not set
|
|
+# CONFIG_CPU_TX39XX is not set
|
|
+# CONFIG_CPU_VR41XX is not set
|
|
+# CONFIG_CPU_R4300 is not set
|
|
+# CONFIG_CPU_R4X00 is not set
|
|
+# CONFIG_CPU_TX49XX is not set
|
|
+# CONFIG_CPU_R5000 is not set
|
|
+# CONFIG_CPU_R5432 is not set
|
|
+# CONFIG_CPU_R6000 is not set
|
|
+# CONFIG_CPU_NEVADA is not set
|
|
+# CONFIG_CPU_R8000 is not set
|
|
+# CONFIG_CPU_R10000 is not set
|
|
+# CONFIG_CPU_RM7000 is not set
|
|
+# CONFIG_CPU_RM9000 is not set
|
|
+# CONFIG_CPU_SB1 is not set
|
|
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
|
+CONFIG_CPU_MIPS32=y
|
|
+CONFIG_CPU_MIPSR1=y
|
|
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
|
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
|
+
|
|
+#
|
|
+# Kernel type
|
|
+#
|
|
+CONFIG_32BIT=y
|
|
+# CONFIG_64BIT is not set
|
|
+CONFIG_PAGE_SIZE_4KB=y
|
|
+# CONFIG_PAGE_SIZE_8KB is not set
|
|
+# CONFIG_PAGE_SIZE_16KB is not set
|
|
+# CONFIG_PAGE_SIZE_64KB is not set
|
|
+CONFIG_CPU_HAS_PREFETCH=y
|
|
+CONFIG_MIPS_MT_DISABLED=y
|
|
+# CONFIG_MIPS_MT_SMP is not set
|
|
+# CONFIG_MIPS_MT_SMTC is not set
|
|
+CONFIG_CPU_HAS_LLSC=y
|
|
+CONFIG_CPU_HAS_SYNC=y
|
|
+CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_GENERIC_IRQ_PROBE=y
|
|
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
|
+CONFIG_ARCH_FLATMEM_ENABLE=y
|
|
+CONFIG_ARCH_POPULATES_NODE_MAP=y
|
|
+CONFIG_SELECT_MEMORY_MODEL=y
|
|
+CONFIG_FLATMEM_MANUAL=y
|
|
+# CONFIG_DISCONTIGMEM_MANUAL is not set
|
|
+# CONFIG_SPARSEMEM_MANUAL is not set
|
|
+CONFIG_FLATMEM=y
|
|
+CONFIG_FLAT_NODE_MEM_MAP=y
|
|
+# CONFIG_SPARSEMEM_STATIC is not set
|
|
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
|
+CONFIG_SPLIT_PTLOCK_CPUS=4
|
|
+# CONFIG_RESOURCES_64BIT is not set
|
|
+CONFIG_ZONE_DMA_FLAG=0
|
|
+CONFIG_VIRT_TO_BUS=y
|
|
+# CONFIG_TICK_ONESHOT is not set
|
|
+# CONFIG_NO_HZ is not set
|
|
+# CONFIG_HIGH_RES_TIMERS is not set
|
|
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
+# CONFIG_HZ_48 is not set
|
|
+CONFIG_HZ_100=y
|
|
+# CONFIG_HZ_128 is not set
|
|
+# CONFIG_HZ_250 is not set
|
|
+# CONFIG_HZ_256 is not set
|
|
+# CONFIG_HZ_1000 is not set
|
|
+# CONFIG_HZ_1024 is not set
|
|
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
|
+CONFIG_HZ=100
|
|
+# CONFIG_PREEMPT_NONE is not set
|
|
+# CONFIG_PREEMPT_VOLUNTARY is not set
|
|
+CONFIG_PREEMPT=y
|
|
+CONFIG_PREEMPT_BKL=y
|
|
+# CONFIG_KEXEC is not set
|
|
+CONFIG_SECCOMP=y
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
+
|
|
+#
|
|
+# General setup
|
|
+#
|
|
+CONFIG_EXPERIMENTAL=y
|
|
+CONFIG_BROKEN_ON_SMP=y
|
|
+CONFIG_LOCK_KERNEL=y
|
|
+CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
+CONFIG_LOCALVERSION=""
|
|
+CONFIG_LOCALVERSION_AUTO=y
|
|
+CONFIG_SWAP=y
|
|
+CONFIG_SYSVIPC=y
|
|
+CONFIG_SYSVIPC_SYSCTL=y
|
|
+# CONFIG_BSD_PROCESS_ACCT is not set
|
|
+# CONFIG_USER_NS is not set
|
|
+# CONFIG_PID_NS is not set
|
|
+# CONFIG_IKCONFIG is not set
|
|
+CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_CGROUPS is not set
|
|
+CONFIG_FAIR_GROUP_SCHED=y
|
|
+CONFIG_FAIR_USER_SCHED=y
|
|
+# CONFIG_FAIR_CGROUP_SCHED is not set
|
|
+CONFIG_SYSFS_DEPRECATED=y
|
|
+CONFIG_RELAY=y
|
|
+# CONFIG_BLK_DEV_INITRD is not set
|
|
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
|
+CONFIG_SYSCTL=y
|
|
+CONFIG_EMBEDDED=y
|
|
+CONFIG_SYSCTL_SYSCALL=y
|
|
+CONFIG_KALLSYMS=y
|
|
+CONFIG_KALLSYMS_ALL=y
|
|
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
|
+CONFIG_HOTPLUG=y
|
|
+CONFIG_PRINTK=y
|
|
+CONFIG_BUG=y
|
|
+CONFIG_ELF_CORE=y
|
|
+CONFIG_BASE_FULL=y
|
|
+CONFIG_FUTEX=y
|
|
+CONFIG_ANON_INODES=y
|
|
+CONFIG_EPOLL=y
|
|
+CONFIG_SIGNALFD=y
|
|
+CONFIG_EVENTFD=y
|
|
+CONFIG_SHMEM=y
|
|
+CONFIG_VM_EVENT_COUNTERS=y
|
|
+CONFIG_SLAB=y
|
|
+# CONFIG_SLUB is not set
|
|
+# CONFIG_SLOB is not set
|
|
+CONFIG_SLABINFO=y
|
|
+CONFIG_RT_MUTEXES=y
|
|
+# CONFIG_TINY_SHMEM is not set
|
|
+CONFIG_BASE_SMALL=0
|
|
+CONFIG_MODULES=y
|
|
+CONFIG_MODULE_UNLOAD=y
|
|
+# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
+CONFIG_MODVERSIONS=y
|
|
+CONFIG_MODULE_SRCVERSION_ALL=y
|
|
+CONFIG_KMOD=y
|
|
+CONFIG_BLOCK=y
|
|
+# CONFIG_LBD is not set
|
|
+# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
+# CONFIG_LSF is not set
|
|
+# CONFIG_BLK_DEV_BSG is not set
|
|
+
|
|
+#
|
|
+# IO Schedulers
|
|
+#
|
|
+CONFIG_IOSCHED_NOOP=y
|
|
+CONFIG_IOSCHED_AS=y
|
|
+CONFIG_IOSCHED_DEADLINE=y
|
|
+CONFIG_IOSCHED_CFQ=y
|
|
+CONFIG_DEFAULT_AS=y
|
|
+# CONFIG_DEFAULT_DEADLINE is not set
|
|
+# CONFIG_DEFAULT_CFQ is not set
|
|
+# CONFIG_DEFAULT_NOOP is not set
|
|
+CONFIG_DEFAULT_IOSCHED="anticipatory"
|
|
+
|
|
+#
|
|
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
|
|
+#
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
+CONFIG_MMU=y
|
|
+# CONFIG_PCCARD is not set
|
|
+
|
|
+#
|
|
+# Executable file formats
|
|
+#
|
|
+CONFIG_BINFMT_ELF=y
|
|
+# CONFIG_BINFMT_MISC is not set
|
|
+CONFIG_TRAD_SIGNALS=y
|
|
+
|
|
+#
|
|
+# CPU Frequency scaling
|
|
+#
|
|
+CONFIG_CPU_FREQ_JZ=y
|
|
+CONFIG_CPU_FREQ=y
|
|
+CONFIG_CPU_FREQ_TABLE=y
|
|
+# CONFIG_CPU_FREQ_DEBUG is not set
|
|
+CONFIG_CPU_FREQ_STAT=y
|
|
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
|
|
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
|
|
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
|
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
|
|
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
|
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
|
|
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
|
|
+
|
|
+#
|
|
+# Power management options
|
|
+#
|
|
+CONFIG_PM=y
|
|
+CONFIG_PM_LEGACY=y
|
|
+# CONFIG_PM_DEBUG is not set
|
|
+CONFIG_PM_SLEEP=y
|
|
+CONFIG_SUSPEND_UP_POSSIBLE=y
|
|
+CONFIG_SUSPEND=y
|
|
+
|
|
+#
|
|
+# Networking
|
|
+#
|
|
+# CONFIG_NET is not set
|
|
+
|
|
+#
|
|
+# Device Drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# Generic Driver Options
|
|
+#
|
|
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
+CONFIG_STANDALONE=y
|
|
+CONFIG_PREVENT_FIRMWARE_BUILD=y
|
|
+# CONFIG_FW_LOADER is not set
|
|
+# CONFIG_SYS_HYPERVISOR is not set
|
|
+CONFIG_MTD=y
|
|
+# CONFIG_MTD_DEBUG is not set
|
|
+CONFIG_MTD_CONCAT=y
|
|
+CONFIG_MTD_PARTITIONS=y
|
|
+# CONFIG_MTD_REDBOOT_PARTS is not set
|
|
+# CONFIG_MTD_CMDLINE_PARTS is not set
|
|
+
|
|
+#
|
|
+# User Modules And Translation Layers
|
|
+#
|
|
+CONFIG_MTD_CHAR=y
|
|
+CONFIG_MTD_BLKDEVS=y
|
|
+CONFIG_MTD_BLOCK=y
|
|
+# CONFIG_FTL is not set
|
|
+# CONFIG_NFTL is not set
|
|
+# CONFIG_INFTL is not set
|
|
+# CONFIG_RFD_FTL is not set
|
|
+# CONFIG_SSFDC is not set
|
|
+# CONFIG_MTD_OOPS is not set
|
|
+
|
|
+#
|
|
+# RAM/ROM/Flash chip drivers
|
|
+#
|
|
+# CONFIG_MTD_CFI is not set
|
|
+# CONFIG_MTD_JEDECPROBE is not set
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
|
+CONFIG_MTD_CFI_I1=y
|
|
+CONFIG_MTD_CFI_I2=y
|
|
+# CONFIG_MTD_CFI_I4 is not set
|
|
+# CONFIG_MTD_CFI_I8 is not set
|
|
+# CONFIG_MTD_RAM is not set
|
|
+# CONFIG_MTD_ROM is not set
|
|
+# CONFIG_MTD_ABSENT is not set
|
|
+
|
|
+#
|
|
+# Mapping drivers for chip access
|
|
+#
|
|
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
|
+# CONFIG_MTD_PLATRAM is not set
|
|
+
|
|
+#
|
|
+# Self-contained MTD device drivers
|
|
+#
|
|
+# CONFIG_MTD_SLRAM is not set
|
|
+# CONFIG_MTD_PHRAM is not set
|
|
+# CONFIG_MTD_MTDRAM is not set
|
|
+CONFIG_MTD_BLOCK2MTD=y
|
|
+
|
|
+#
|
|
+# Disk-On-Chip Device Drivers
|
|
+#
|
|
+# CONFIG_MTD_DOC2000 is not set
|
|
+# CONFIG_MTD_DOC2001 is not set
|
|
+# CONFIG_MTD_DOC2001PLUS is not set
|
|
+CONFIG_MTD_NAND=y
|
|
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
|
|
+# CONFIG_MTD_NAND_ECC_SMC is not set
|
|
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
|
|
+CONFIG_MTD_NAND_IDS=y
|
|
+# CONFIG_MTD_NAND_DISKONCHIP is not set
|
|
+# CONFIG_MTD_NAND_NANDSIM is not set
|
|
+# CONFIG_MTD_NAND_PLATFORM is not set
|
|
+CONFIG_MTD_NAND_JZ4740=y
|
|
+# CONFIG_MTD_HW_HM_ECC is not set
|
|
+# CONFIG_MTD_SW_HM_ECC is not set
|
|
+CONFIG_MTD_HW_RS_ECC=y
|
|
+# CONFIG_MTD_MTDBLOCK_WRITE_VERIFY_ENABLE is not set
|
|
+CONFIG_MTD_OOB_COPIES=3
|
|
+CONFIG_MTD_BADBLOCK_FLAG_PAGE=127
|
|
+# CONFIG_MTD_ONENAND is not set
|
|
+
|
|
+#
|
|
+# UBI - Unsorted block images
|
|
+#
|
|
+CONFIG_MTD_UBI=m
|
|
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
|
+CONFIG_MTD_UBI_BEB_RESERVE=1
|
|
+CONFIG_MTD_UBI_GLUEBI=y
|
|
+
|
|
+#
|
|
+# UBI debugging options
|
|
+#
|
|
+# CONFIG_MTD_UBI_DEBUG is not set
|
|
+# CONFIG_MTD_UBI_BLKDEVS is not set
|
|
+# CONFIG_PARPORT is not set
|
|
+# CONFIG_PNP is not set
|
|
+CONFIG_BLK_DEV=y
|
|
+# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
+CONFIG_BLK_DEV_LOOP=y
|
|
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
|
+CONFIG_BLK_DEV_RAM=y
|
|
+CONFIG_BLK_DEV_RAM_COUNT=16
|
|
+CONFIG_BLK_DEV_RAM_SIZE=4096
|
|
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
+# CONFIG_CDROM_PKTCDVD is not set
|
|
+CONFIG_MISC_DEVICES=y
|
|
+# CONFIG_EEPROM_93CX6 is not set
|
|
+# CONFIG_IDE is not set
|
|
+
|
|
+#
|
|
+# SCSI device support
|
|
+#
|
|
+# CONFIG_RAID_ATTRS is not set
|
|
+CONFIG_SCSI=y
|
|
+CONFIG_SCSI_DMA=y
|
|
+# CONFIG_SCSI_TGT is not set
|
|
+# CONFIG_SCSI_NETLINK is not set
|
|
+CONFIG_SCSI_PROC_FS=y
|
|
+
|
|
+#
|
|
+# SCSI support type (disk, tape, CD-ROM)
|
|
+#
|
|
+CONFIG_BLK_DEV_SD=y
|
|
+# CONFIG_CHR_DEV_ST is not set
|
|
+# CONFIG_CHR_DEV_OSST is not set
|
|
+# CONFIG_BLK_DEV_SR is not set
|
|
+# CONFIG_CHR_DEV_SG is not set
|
|
+# CONFIG_CHR_DEV_SCH is not set
|
|
+
|
|
+#
|
|
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
|
+#
|
|
+# CONFIG_SCSI_MULTI_LUN is not set
|
|
+# CONFIG_SCSI_CONSTANTS is not set
|
|
+# CONFIG_SCSI_LOGGING is not set
|
|
+# CONFIG_SCSI_SCAN_ASYNC is not set
|
|
+CONFIG_SCSI_WAIT_SCAN=m
|
|
+
|
|
+#
|
|
+# SCSI Transports
|
|
+#
|
|
+# CONFIG_SCSI_SPI_ATTRS is not set
|
|
+# CONFIG_SCSI_FC_ATTRS is not set
|
|
+# CONFIG_SCSI_SAS_LIBSAS is not set
|
|
+# CONFIG_SCSI_SRP_ATTRS is not set
|
|
+CONFIG_SCSI_LOWLEVEL=y
|
|
+# CONFIG_SCSI_DEBUG is not set
|
|
+# CONFIG_ATA is not set
|
|
+# CONFIG_MD is not set
|
|
+# CONFIG_PHONE is not set
|
|
+
|
|
+#
|
|
+# Input device support
|
|
+#
|
|
+CONFIG_INPUT=y
|
|
+# CONFIG_INPUT_FF_MEMLESS is not set
|
|
+# CONFIG_INPUT_POLLDEV is not set
|
|
+
|
|
+#
|
|
+# Userland interfaces
|
|
+#
|
|
+CONFIG_INPUT_MOUSEDEV=y
|
|
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
|
+# CONFIG_INPUT_JOYDEV is not set
|
|
+CONFIG_INPUT_EVDEV=y
|
|
+# CONFIG_INPUT_EVBUG is not set
|
|
+
|
|
+#
|
|
+# Input Device Drivers
|
|
+#
|
|
+# CONFIG_INPUT_KEYBOARD is not set
|
|
+# CONFIG_INPUT_MOUSE is not set
|
|
+# CONFIG_INPUT_JOYSTICK is not set
|
|
+# CONFIG_INPUT_TABLET is not set
|
|
+# CONFIG_INPUT_TOUCHSCREEN is not set
|
|
+# CONFIG_INPUT_MISC is not set
|
|
+
|
|
+#
|
|
+# Hardware I/O ports
|
|
+#
|
|
+CONFIG_SERIO=y
|
|
+# CONFIG_SERIO_I8042 is not set
|
|
+CONFIG_SERIO_SERPORT=y
|
|
+# CONFIG_SERIO_LIBPS2 is not set
|
|
+# CONFIG_SERIO_RAW is not set
|
|
+# CONFIG_GAMEPORT is not set
|
|
+
|
|
+#
|
|
+# Character devices
|
|
+#
|
|
+CONFIG_VT=y
|
|
+CONFIG_VT_CONSOLE=y
|
|
+CONFIG_HW_CONSOLE=y
|
|
+CONFIG_VT_HW_CONSOLE_BINDING=y
|
|
+# CONFIG_SERIAL_NONSTANDARD is not set
|
|
+
|
|
+#
|
|
+# Serial drivers
|
|
+#
|
|
+CONFIG_SERIAL_8250=y
|
|
+CONFIG_SERIAL_8250_CONSOLE=y
|
|
+CONFIG_SERIAL_8250_NR_UARTS=4
|
|
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
|
|
+# CONFIG_SERIAL_8250_EXTENDED is not set
|
|
+
|
|
+#
|
|
+# Non-8250 serial port support
|
|
+#
|
|
+CONFIG_SERIAL_CORE=y
|
|
+CONFIG_SERIAL_CORE_CONSOLE=y
|
|
+CONFIG_UNIX98_PTYS=y
|
|
+CONFIG_LEGACY_PTYS=y
|
|
+CONFIG_LEGACY_PTY_COUNT=256
|
|
+# CONFIG_IPMI_HANDLER is not set
|
|
+# CONFIG_HW_RANDOM is not set
|
|
+# CONFIG_RTC is not set
|
|
+# CONFIG_RTC_PCF8563 is not set
|
|
+CONFIG_RTC_JZ=y
|
|
+# CONFIG_R3964 is not set
|
|
+# CONFIG_RAW_DRIVER is not set
|
|
+# CONFIG_TCG_TPM is not set
|
|
+
|
|
+#
|
|
+# JZSOC char device support
|
|
+#
|
|
+CONFIG_JZCHAR=y
|
|
+# CONFIG_JZ_CIM is not set
|
|
+CONFIG_JZ_TPANEL_ATA2508=y
|
|
+# CONFIG_JZ_TPANEL is not set
|
|
+CONFIG_JZ_UDC_HOTPLUG=y
|
|
+CONFIG_JZ_POWEROFF=y
|
|
+# CONFIG_JZ_OW is not set
|
|
+# CONFIG_I2C is not set
|
|
+
|
|
+#
|
|
+# SPI support
|
|
+#
|
|
+# CONFIG_SPI is not set
|
|
+# CONFIG_SPI_MASTER is not set
|
|
+# CONFIG_W1 is not set
|
|
+# CONFIG_POWER_SUPPLY is not set
|
|
+# CONFIG_HWMON is not set
|
|
+CONFIG_WATCHDOG=y
|
|
+# CONFIG_WATCHDOG_NOWAYOUT is not set
|
|
+
|
|
+#
|
|
+# Watchdog Device Drivers
|
|
+#
|
|
+CONFIG_JZ_WDT=y
|
|
+# CONFIG_SOFT_WATCHDOG is not set
|
|
+
|
|
+#
|
|
+# Sonics Silicon Backplane
|
|
+#
|
|
+CONFIG_SSB_POSSIBLE=y
|
|
+# CONFIG_SSB is not set
|
|
+
|
|
+#
|
|
+# Multifunction device drivers
|
|
+#
|
|
+# CONFIG_MFD_SM501 is not set
|
|
+
|
|
+#
|
|
+# Multimedia devices
|
|
+#
|
|
+# CONFIG_VIDEO_DEV is not set
|
|
+# CONFIG_DAB is not set
|
|
+
|
|
+#
|
|
+# Graphics support
|
|
+#
|
|
+# CONFIG_VGASTATE is not set
|
|
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
|
+CONFIG_FB=y
|
|
+# CONFIG_FIRMWARE_EDID is not set
|
|
+# CONFIG_FB_DDC is not set
|
|
+CONFIG_FB_CFB_FILLRECT=y
|
|
+CONFIG_FB_CFB_COPYAREA=y
|
|
+CONFIG_FB_CFB_IMAGEBLIT=y
|
|
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
|
|
+# CONFIG_FB_SYS_FILLRECT is not set
|
|
+# CONFIG_FB_SYS_COPYAREA is not set
|
|
+# CONFIG_FB_SYS_IMAGEBLIT is not set
|
|
+# CONFIG_FB_SYS_FOPS is not set
|
|
+CONFIG_FB_DEFERRED_IO=y
|
|
+# CONFIG_FB_SVGALIB is not set
|
|
+# CONFIG_FB_MACMODES is not set
|
|
+# CONFIG_FB_BACKLIGHT is not set
|
|
+# CONFIG_FB_MODE_HELPERS is not set
|
|
+# CONFIG_FB_TILEBLITTING is not set
|
|
+
|
|
+#
|
|
+# Frame buffer hardware drivers
|
|
+#
|
|
+CONFIG_FB_JZSOC=y
|
|
+# CONFIG_FB_JZ4740_SLCD is not set
|
|
+CONFIG_FB_JZLCD_4730_4740=y
|
|
+CONFIG_JZLCD_FRAMEBUFFER_MAX=1
|
|
+# CONFIG_JZLCD_FRAMEBUFFER_ROTATE_SUPPORT is not set
|
|
+# CONFIG_JZLCD_SHARP_LQ035Q7 is not set
|
|
+# CONFIG_JZLCD_SAMSUNG_LTS350Q1 is not set
|
|
+# CONFIG_JZLCD_SAMSUNG_LTV350QVF04 is not set
|
|
+# CONFIG_JZLCD_SAMSUNG_LTP400WQF01 is not set
|
|
+# CONFIG_JZLCD_SAMSUNG_LTP400WQF02 is not set
|
|
+CONFIG_JZLCD_AUO_A030FL01_V1=y
|
|
+# CONFIG_JZLCD_TRULY_TFTG320240DTSW is not set
|
|
+# CONFIG_JZLCD_TRULY_TFTG320240DTSW_SERIAL is not set
|
|
+# CONFIG_JZLCD_TRULY_TFTG240320UTSW_63W_E is not set
|
|
+# CONFIG_JZLCD_FOXCONN_PT035TN01 is not set
|
|
+# CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL is not set
|
|
+# CONFIG_JZLCD_TOSHIBA_LTM084P363 is not set
|
|
+# CONFIG_JZLCD_HYNIX_HT10X21 is not set
|
|
+# CONFIG_JZLCD_INNOLUX_AT080TN42 is not set
|
|
+# CONFIG_JZLCD_CSTN_800x600 is not set
|
|
+# CONFIG_JZLCD_CSTN_320x240 is not set
|
|
+# CONFIG_JZLCD_MSTN_480x320 is not set
|
|
+# CONFIG_JZLCD_MSTN_320x240 is not set
|
|
+# CONFIG_JZLCD_MSTN_240x128 is not set
|
|
+# CONFIG_FB_S1D13XXX is not set
|
|
+# CONFIG_FB_VIRTUAL is not set
|
|
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Display device support
|
|
+#
|
|
+# CONFIG_DISPLAY_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Console display driver support
|
|
+#
|
|
+# CONFIG_VGA_CONSOLE is not set
|
|
+CONFIG_DUMMY_CONSOLE=y
|
|
+CONFIG_FRAMEBUFFER_CONSOLE=y
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE_CURSOR_FLASH is not set
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
|
|
+CONFIG_FONTS=y
|
|
+CONFIG_FONT_8x8=y
|
|
+CONFIG_FONT_8x16=y
|
|
+# CONFIG_FONT_6x11 is not set
|
|
+# CONFIG_FONT_7x14 is not set
|
|
+# CONFIG_FONT_PEARL_8x8 is not set
|
|
+# CONFIG_FONT_ACORN_8x8 is not set
|
|
+# CONFIG_FONT_MINI_4x6 is not set
|
|
+# CONFIG_FONT_SUN8x16 is not set
|
|
+# CONFIG_FONT_SUN12x22 is not set
|
|
+# CONFIG_FONT_10x18 is not set
|
|
+CONFIG_LOGO=y
|
|
+CONFIG_LOGO_LINUX_MONO=y
|
|
+CONFIG_LOGO_LINUX_VGA16=y
|
|
+CONFIG_LOGO_LINUX_CLUT224=y
|
|
+
|
|
+#
|
|
+# Sound
|
|
+#
|
|
+CONFIG_SOUND=y
|
|
+
|
|
+#
|
|
+# Advanced Linux Sound Architecture
|
|
+#
|
|
+# CONFIG_SND is not set
|
|
+
|
|
+#
|
|
+# Open Sound System
|
|
+#
|
|
+CONFIG_SOUND_PRIME=y
|
|
+CONFIG_OSS_OBSOLETE=y
|
|
+# CONFIG_SOUND_JZ_AC97 is not set
|
|
+CONFIG_SOUND_JZ_I2S=y
|
|
+# CONFIG_SOUND_JZ_PCM is not set
|
|
+# CONFIG_I2S_AK4642EN is not set
|
|
+CONFIG_I2S_ICODEC=y
|
|
+# CONFIG_SOUND_MSNDCLAS is not set
|
|
+# CONFIG_SOUND_MSNDPIN is not set
|
|
+CONFIG_HID_SUPPORT=y
|
|
+CONFIG_HID=y
|
|
+# CONFIG_HID_DEBUG is not set
|
|
+# CONFIG_HIDRAW is not set
|
|
+CONFIG_USB_SUPPORT=y
|
|
+CONFIG_USB_ARCH_HAS_HCD=y
|
|
+CONFIG_USB_ARCH_HAS_OHCI=y
|
|
+# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
+# CONFIG_USB is not set
|
|
+
|
|
+#
|
|
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Gadget Support
|
|
+#
|
|
+CONFIG_USB_GADGET=m
|
|
+CONFIG_USB_GADGET_DEBUG_FILES=y
|
|
+# CONFIG_USB_GADGET_DEBUG_FS is not set
|
|
+CONFIG_USB_GADGET_SELECTED=y
|
|
+CONFIG_USB_GADGET_JZ4740=y
|
|
+CONFIG_USB_JZ4740=m
|
|
+# CONFIG_USB_GADGET_JZ4730 is not set
|
|
+# CONFIG_USB_GADGET_AMD5536UDC is not set
|
|
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
|
|
+# CONFIG_USB_GADGET_FSL_USB2 is not set
|
|
+# CONFIG_USB_GADGET_NET2280 is not set
|
|
+# CONFIG_USB_GADGET_PXA2XX is not set
|
|
+# CONFIG_USB_GADGET_M66592 is not set
|
|
+# CONFIG_USB_GADGET_GOKU is not set
|
|
+# CONFIG_USB_GADGET_LH7A40X is not set
|
|
+# CONFIG_USB_GADGET_OMAP is not set
|
|
+# CONFIG_USB_GADGET_S3C2410 is not set
|
|
+# CONFIG_USB_GADGET_AT91 is not set
|
|
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
|
|
+CONFIG_USB_GADGET_DUALSPEED=y
|
|
+# CONFIG_USB_ZERO is not set
|
|
+# CONFIG_USB_ETH is not set
|
|
+# CONFIG_USB_GADGETFS is not set
|
|
+CONFIG_USB_FILE_STORAGE=m
|
|
+# CONFIG_USB_FILE_STORAGE_TEST is not set
|
|
+CONFIG_USB_G_SERIAL=m
|
|
+# CONFIG_USB_MIDI_GADGET is not set
|
|
+CONFIG_MMC=y
|
|
+# CONFIG_MMC_DEBUG is not set
|
|
+# CONFIG_MMC_UNSAFE_RESUME is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Card Drivers
|
|
+#
|
|
+CONFIG_MMC_BLOCK=y
|
|
+CONFIG_MMC_BLOCK_BOUNCE=y
|
|
+# CONFIG_SDIO_UART is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Host Controller Drivers
|
|
+#
|
|
+# CONFIG_MMC_JZ is not set
|
|
+# CONFIG_NEW_LEDS is not set
|
|
+CONFIG_RTC_LIB=y
|
|
+# CONFIG_RTC_CLASS is not set
|
|
+
|
|
+#
|
|
+# Userspace I/O
|
|
+#
|
|
+# CONFIG_UIO is not set
|
|
+
|
|
+#
|
|
+# File systems
|
|
+#
|
|
+CONFIG_EXT2_FS=y
|
|
+CONFIG_EXT2_FS_XATTR=y
|
|
+# CONFIG_EXT2_FS_POSIX_ACL is not set
|
|
+# CONFIG_EXT2_FS_SECURITY is not set
|
|
+# CONFIG_EXT2_FS_XIP is not set
|
|
+CONFIG_EXT3_FS=y
|
|
+CONFIG_EXT3_FS_XATTR=y
|
|
+# CONFIG_EXT3_FS_POSIX_ACL is not set
|
|
+# CONFIG_EXT3_FS_SECURITY is not set
|
|
+# CONFIG_EXT4DEV_FS is not set
|
|
+CONFIG_JBD=y
|
|
+# CONFIG_JBD_DEBUG is not set
|
|
+CONFIG_FS_MBCACHE=y
|
|
+# CONFIG_REISERFS_FS is not set
|
|
+# CONFIG_JFS_FS is not set
|
|
+# CONFIG_FS_POSIX_ACL is not set
|
|
+# CONFIG_XFS_FS is not set
|
|
+# CONFIG_GFS2_FS is not set
|
|
+CONFIG_MINIX_FS=y
|
|
+# CONFIG_ROMFS_FS is not set
|
|
+CONFIG_INOTIFY=y
|
|
+CONFIG_INOTIFY_USER=y
|
|
+# CONFIG_QUOTA is not set
|
|
+CONFIG_DNOTIFY=y
|
|
+# CONFIG_AUTOFS_FS is not set
|
|
+# CONFIG_AUTOFS4_FS is not set
|
|
+# CONFIG_FUSE_FS is not set
|
|
+
|
|
+#
|
|
+# CD-ROM/DVD Filesystems
|
|
+#
|
|
+# CONFIG_ISO9660_FS is not set
|
|
+# CONFIG_UDF_FS is not set
|
|
+
|
|
+#
|
|
+# DOS/FAT/NT Filesystems
|
|
+#
|
|
+CONFIG_FAT_FS=y
|
|
+CONFIG_MSDOS_FS=y
|
|
+CONFIG_VFAT_FS=y
|
|
+CONFIG_FAT_DEFAULT_CODEPAGE=437
|
|
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
|
+# CONFIG_NTFS_FS is not set
|
|
+
|
|
+#
|
|
+# Pseudo filesystems
|
|
+#
|
|
+CONFIG_PROC_FS=y
|
|
+CONFIG_PROC_KCORE=y
|
|
+CONFIG_PROC_SYSCTL=y
|
|
+CONFIG_SYSFS=y
|
|
+CONFIG_TMPFS=y
|
|
+# CONFIG_TMPFS_POSIX_ACL is not set
|
|
+# CONFIG_HUGETLB_PAGE is not set
|
|
+# CONFIG_CONFIGFS_FS is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous filesystems
|
|
+#
|
|
+# CONFIG_ADFS_FS is not set
|
|
+# CONFIG_AFFS_FS is not set
|
|
+# CONFIG_HFS_FS is not set
|
|
+# CONFIG_HFSPLUS_FS is not set
|
|
+# CONFIG_BEFS_FS is not set
|
|
+# CONFIG_BFS_FS is not set
|
|
+# CONFIG_EFS_FS is not set
|
|
+# CONFIG_JFFS2_FS is not set
|
|
+CONFIG_UBIFS_FS=m
|
|
+# CONFIG_UBIFS_FS_XATTR is not set
|
|
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
|
|
+CONFIG_UBIFS_FS_LZO=y
|
|
+CONFIG_UBIFS_FS_ZLIB=y
|
|
+CONFIG_UBIFS_FS_DEBUG=y
|
|
+CONFIG_UBIFS_FS_DEBUG_MSG_LVL=0
|
|
+# CONFIG_UBIFS_FS_DEBUG_CHKS is not set
|
|
+# CONFIG_CRAMFS is not set
|
|
+# CONFIG_VXFS_FS is not set
|
|
+# CONFIG_HPFS_FS is not set
|
|
+# CONFIG_QNX4FS_FS is not set
|
|
+# CONFIG_SYSV_FS is not set
|
|
+# CONFIG_UFS_FS is not set
|
|
+
|
|
+#
|
|
+# Partition Types
|
|
+#
|
|
+CONFIG_PARTITION_ADVANCED=y
|
|
+# CONFIG_ACORN_PARTITION is not set
|
|
+# CONFIG_OSF_PARTITION is not set
|
|
+# CONFIG_AMIGA_PARTITION is not set
|
|
+# CONFIG_ATARI_PARTITION is not set
|
|
+# CONFIG_MAC_PARTITION is not set
|
|
+CONFIG_MSDOS_PARTITION=y
|
|
+# CONFIG_BSD_DISKLABEL is not set
|
|
+# CONFIG_MINIX_SUBPARTITION is not set
|
|
+# CONFIG_SOLARIS_X86_PARTITION is not set
|
|
+# CONFIG_UNIXWARE_DISKLABEL is not set
|
|
+# CONFIG_LDM_PARTITION is not set
|
|
+# CONFIG_SGI_PARTITION is not set
|
|
+# CONFIG_ULTRIX_PARTITION is not set
|
|
+# CONFIG_SUN_PARTITION is not set
|
|
+# CONFIG_KARMA_PARTITION is not set
|
|
+# CONFIG_EFI_PARTITION is not set
|
|
+# CONFIG_SYSV68_PARTITION is not set
|
|
+CONFIG_NLS=y
|
|
+CONFIG_NLS_DEFAULT="iso8859-1"
|
|
+CONFIG_NLS_CODEPAGE_437=y
|
|
+# CONFIG_NLS_CODEPAGE_737 is not set
|
|
+# CONFIG_NLS_CODEPAGE_775 is not set
|
|
+# CONFIG_NLS_CODEPAGE_850 is not set
|
|
+# CONFIG_NLS_CODEPAGE_852 is not set
|
|
+# CONFIG_NLS_CODEPAGE_855 is not set
|
|
+# CONFIG_NLS_CODEPAGE_857 is not set
|
|
+# CONFIG_NLS_CODEPAGE_860 is not set
|
|
+# CONFIG_NLS_CODEPAGE_861 is not set
|
|
+# CONFIG_NLS_CODEPAGE_862 is not set
|
|
+# CONFIG_NLS_CODEPAGE_863 is not set
|
|
+# CONFIG_NLS_CODEPAGE_864 is not set
|
|
+# CONFIG_NLS_CODEPAGE_865 is not set
|
|
+# CONFIG_NLS_CODEPAGE_866 is not set
|
|
+# CONFIG_NLS_CODEPAGE_869 is not set
|
|
+CONFIG_NLS_CODEPAGE_936=y
|
|
+# CONFIG_NLS_CODEPAGE_950 is not set
|
|
+# CONFIG_NLS_CODEPAGE_932 is not set
|
|
+# CONFIG_NLS_CODEPAGE_949 is not set
|
|
+# CONFIG_NLS_CODEPAGE_874 is not set
|
|
+# CONFIG_NLS_ISO8859_8 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1250 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1251 is not set
|
|
+CONFIG_NLS_ASCII=y
|
|
+CONFIG_NLS_ISO8859_1=y
|
|
+# CONFIG_NLS_ISO8859_2 is not set
|
|
+# CONFIG_NLS_ISO8859_3 is not set
|
|
+# CONFIG_NLS_ISO8859_4 is not set
|
|
+# CONFIG_NLS_ISO8859_5 is not set
|
|
+# CONFIG_NLS_ISO8859_6 is not set
|
|
+# CONFIG_NLS_ISO8859_7 is not set
|
|
+# CONFIG_NLS_ISO8859_9 is not set
|
|
+# CONFIG_NLS_ISO8859_13 is not set
|
|
+# CONFIG_NLS_ISO8859_14 is not set
|
|
+# CONFIG_NLS_ISO8859_15 is not set
|
|
+# CONFIG_NLS_KOI8_R is not set
|
|
+# CONFIG_NLS_KOI8_U is not set
|
|
+# CONFIG_NLS_UTF8 is not set
|
|
+
|
|
+#
|
|
+# Yaffs2 Filesystems
|
|
+#
|
|
+CONFIG_YAFFS_FS=y
|
|
+CONFIG_YAFFS_YAFFS1=y
|
|
+# CONFIG_YAFFS_DOES_ECC is not set
|
|
+CONFIG_YAFFS_YAFFS2=y
|
|
+CONFIG_YAFFS_AUTO_YAFFS2=y
|
|
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
|
|
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
|
|
+CONFIG_YAFFS_DISABLE_CHUNK_ERASED_CHECK=y
|
|
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
|
|
+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
|
|
+CONFIG_INSTRUMENTATION=y
|
|
+# CONFIG_PROFILING is not set
|
|
+# CONFIG_MARKERS is not set
|
|
+
|
|
+#
|
|
+# Kernel hacking
|
|
+#
|
|
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
+# CONFIG_PRINTK_TIME is not set
|
|
+CONFIG_ENABLE_WARN_DEPRECATED=y
|
|
+CONFIG_ENABLE_MUST_CHECK=y
|
|
+CONFIG_MAGIC_SYSRQ=y
|
|
+# CONFIG_UNUSED_SYMBOLS is not set
|
|
+CONFIG_DEBUG_FS=y
|
|
+# CONFIG_HEADERS_CHECK is not set
|
|
+# CONFIG_DEBUG_KERNEL is not set
|
|
+# CONFIG_SAMPLES is not set
|
|
+CONFIG_CMDLINE=""
|
|
+
|
|
+#
|
|
+# Security options
|
|
+#
|
|
+# CONFIG_KEYS is not set
|
|
+# CONFIG_SECURITY is not set
|
|
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
|
+CONFIG_CRYPTO=y
|
|
+CONFIG_CRYPTO_ALGAPI=y
|
|
+CONFIG_CRYPTO_BLKCIPHER=y
|
|
+CONFIG_CRYPTO_MANAGER=y
|
|
+# CONFIG_CRYPTO_HMAC is not set
|
|
+# CONFIG_CRYPTO_XCBC is not set
|
|
+# CONFIG_CRYPTO_NULL is not set
|
|
+# CONFIG_CRYPTO_MD4 is not set
|
|
+CONFIG_CRYPTO_MD5=y
|
|
+# CONFIG_CRYPTO_SHA1 is not set
|
|
+# CONFIG_CRYPTO_SHA256 is not set
|
|
+# CONFIG_CRYPTO_SHA512 is not set
|
|
+# CONFIG_CRYPTO_WP512 is not set
|
|
+# CONFIG_CRYPTO_TGR192 is not set
|
|
+# CONFIG_CRYPTO_GF128MUL is not set
|
|
+# CONFIG_CRYPTO_ECB is not set
|
|
+CONFIG_CRYPTO_CBC=y
|
|
+# CONFIG_CRYPTO_PCBC is not set
|
|
+# CONFIG_CRYPTO_LRW is not set
|
|
+# CONFIG_CRYPTO_XTS is not set
|
|
+# CONFIG_CRYPTO_CRYPTD is not set
|
|
+CONFIG_CRYPTO_DES=y
|
|
+# CONFIG_CRYPTO_FCRYPT is not set
|
|
+# CONFIG_CRYPTO_BLOWFISH is not set
|
|
+# CONFIG_CRYPTO_TWOFISH is not set
|
|
+# CONFIG_CRYPTO_SERPENT is not set
|
|
+# CONFIG_CRYPTO_AES is not set
|
|
+# CONFIG_CRYPTO_CAST5 is not set
|
|
+# CONFIG_CRYPTO_CAST6 is not set
|
|
+# CONFIG_CRYPTO_TEA is not set
|
|
+# CONFIG_CRYPTO_ARC4 is not set
|
|
+# CONFIG_CRYPTO_KHAZAD is not set
|
|
+# CONFIG_CRYPTO_ANUBIS is not set
|
|
+# CONFIG_CRYPTO_SEED is not set
|
|
+CONFIG_CRYPTO_DEFLATE=m
|
|
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
|
|
+# CONFIG_CRYPTO_CRC32C is not set
|
|
+# CONFIG_CRYPTO_CAMELLIA is not set
|
|
+# CONFIG_CRYPTO_TEST is not set
|
|
+# CONFIG_CRYPTO_AUTHENC is not set
|
|
+CONFIG_CRYPTO_LZO=m
|
|
+CONFIG_CRYPTO_HW=y
|
|
+
|
|
+#
|
|
+# Library routines
|
|
+#
|
|
+CONFIG_BITREVERSE=y
|
|
+# CONFIG_CRC_CCITT is not set
|
|
+CONFIG_CRC16=m
|
|
+# CONFIG_CRC_ITU_T is not set
|
|
+CONFIG_CRC32=y
|
|
+# CONFIG_CRC7 is not set
|
|
+# CONFIG_LIBCRC32C is not set
|
|
+CONFIG_ZLIB_INFLATE=m
|
|
+CONFIG_ZLIB_DEFLATE=m
|
|
+CONFIG_LZO_COMPRESS=m
|
|
+CONFIG_LZO_DECOMPRESS=m
|
|
+CONFIG_PLIST=y
|
|
+CONFIG_HAS_IOMEM=y
|
|
+CONFIG_HAS_IOPORT=y
|
|
+CONFIG_HAS_DMA=y
|
|
--- linux-2.6.24.7.old/arch/mips/configs/pavo_defconfig 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/configs/pavo_defconfig 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,1293 @@
|
|
+#
|
|
+# Automatically generated make config: don't edit
|
|
+# Linux kernel version: 2.6.24.3
|
|
+# Sat Nov 15 16:15:17 2008
|
|
+#
|
|
+CONFIG_MIPS=y
|
|
+
|
|
+#
|
|
+# Machine selection
|
|
+#
|
|
+# CONFIG_JZ4730_PMP is not set
|
|
+CONFIG_JZ4740_PAVO=y
|
|
+# CONFIG_JZ4740_LEO is not set
|
|
+# CONFIG_JZ4740_LYRA is not set
|
|
+# CONFIG_JZ4725_DIPPER is not set
|
|
+# CONFIG_JZ4720_VIRGO is not set
|
|
+# CONFIG_JZ4750_FUWA is not set
|
|
+# CONFIG_JZ4750_APUS is not set
|
|
+# CONFIG_MACH_ALCHEMY is not set
|
|
+# CONFIG_BASLER_EXCITE is not set
|
|
+# CONFIG_BCM47XX is not set
|
|
+# CONFIG_MIPS_COBALT is not set
|
|
+# CONFIG_MACH_DECSTATION is not set
|
|
+# CONFIG_MACH_JAZZ is not set
|
|
+# CONFIG_LASAT is not set
|
|
+# CONFIG_LEMOTE_FULONG is not set
|
|
+# CONFIG_MIPS_ATLAS is not set
|
|
+# CONFIG_MIPS_MALTA is not set
|
|
+# CONFIG_MIPS_SEAD is not set
|
|
+# CONFIG_MIPS_SIM is not set
|
|
+# CONFIG_MARKEINS is not set
|
|
+# CONFIG_MACH_VR41XX is not set
|
|
+# CONFIG_PNX8550_JBS is not set
|
|
+# CONFIG_PNX8550_STB810 is not set
|
|
+# CONFIG_PMC_MSP is not set
|
|
+# CONFIG_PMC_YOSEMITE is not set
|
|
+# CONFIG_QEMU is not set
|
|
+# CONFIG_SGI_IP22 is not set
|
|
+# CONFIG_SGI_IP27 is not set
|
|
+# CONFIG_SGI_IP32 is not set
|
|
+# CONFIG_SIBYTE_CRHINE is not set
|
|
+# CONFIG_SIBYTE_CARMEL is not set
|
|
+# CONFIG_SIBYTE_CRHONE is not set
|
|
+# CONFIG_SIBYTE_RHONE is not set
|
|
+# CONFIG_SIBYTE_SWARM is not set
|
|
+# CONFIG_SIBYTE_LITTLESUR is not set
|
|
+# CONFIG_SIBYTE_SENTOSA is not set
|
|
+# CONFIG_SIBYTE_PTSWARM is not set
|
|
+# CONFIG_SIBYTE_BIGSUR is not set
|
|
+# CONFIG_SNI_RM is not set
|
|
+# CONFIG_TOSHIBA_JMR3927 is not set
|
|
+# CONFIG_TOSHIBA_RBTX4927 is not set
|
|
+# CONFIG_TOSHIBA_RBTX4938 is not set
|
|
+# CONFIG_WR_PPMC is not set
|
|
+CONFIG_SOC_JZ4740=y
|
|
+CONFIG_JZSOC=y
|
|
+CONFIG_JZRISC=y
|
|
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
|
+CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|
+CONFIG_GENERIC_HWEIGHT=y
|
|
+CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
+CONFIG_GENERIC_CLOCKEVENTS=y
|
|
+CONFIG_GENERIC_TIME=y
|
|
+CONFIG_GENERIC_CMOS_UPDATE=y
|
|
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
|
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
|
|
+CONFIG_DMA_NONCOHERENT=y
|
|
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
|
+# CONFIG_HOTPLUG_CPU is not set
|
|
+# CONFIG_NO_IOPORT is not set
|
|
+# CONFIG_CPU_BIG_ENDIAN is not set
|
|
+CONFIG_CPU_LITTLE_ENDIAN=y
|
|
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
|
+CONFIG_MIPS_L1_CACHE_SHIFT=5
|
|
+
|
|
+#
|
|
+# CPU selection
|
|
+#
|
|
+# CONFIG_CPU_LOONGSON2 is not set
|
|
+CONFIG_CPU_MIPS32_R1=y
|
|
+# CONFIG_CPU_MIPS32_R2 is not set
|
|
+# CONFIG_CPU_MIPS64_R1 is not set
|
|
+# CONFIG_CPU_MIPS64_R2 is not set
|
|
+# CONFIG_CPU_R3000 is not set
|
|
+# CONFIG_CPU_TX39XX is not set
|
|
+# CONFIG_CPU_VR41XX is not set
|
|
+# CONFIG_CPU_R4300 is not set
|
|
+# CONFIG_CPU_R4X00 is not set
|
|
+# CONFIG_CPU_TX49XX is not set
|
|
+# CONFIG_CPU_R5000 is not set
|
|
+# CONFIG_CPU_R5432 is not set
|
|
+# CONFIG_CPU_R6000 is not set
|
|
+# CONFIG_CPU_NEVADA is not set
|
|
+# CONFIG_CPU_R8000 is not set
|
|
+# CONFIG_CPU_R10000 is not set
|
|
+# CONFIG_CPU_RM7000 is not set
|
|
+# CONFIG_CPU_RM9000 is not set
|
|
+# CONFIG_CPU_SB1 is not set
|
|
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
|
+CONFIG_CPU_MIPS32=y
|
|
+CONFIG_CPU_MIPSR1=y
|
|
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
|
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
|
+
|
|
+#
|
|
+# Kernel type
|
|
+#
|
|
+CONFIG_32BIT=y
|
|
+# CONFIG_64BIT is not set
|
|
+CONFIG_PAGE_SIZE_4KB=y
|
|
+# CONFIG_PAGE_SIZE_8KB is not set
|
|
+# CONFIG_PAGE_SIZE_16KB is not set
|
|
+# CONFIG_PAGE_SIZE_64KB is not set
|
|
+CONFIG_CPU_HAS_PREFETCH=y
|
|
+CONFIG_MIPS_MT_DISABLED=y
|
|
+# CONFIG_MIPS_MT_SMP is not set
|
|
+# CONFIG_MIPS_MT_SMTC is not set
|
|
+CONFIG_CPU_HAS_LLSC=y
|
|
+CONFIG_CPU_HAS_SYNC=y
|
|
+CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_GENERIC_IRQ_PROBE=y
|
|
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
|
+CONFIG_ARCH_FLATMEM_ENABLE=y
|
|
+CONFIG_ARCH_POPULATES_NODE_MAP=y
|
|
+CONFIG_SELECT_MEMORY_MODEL=y
|
|
+CONFIG_FLATMEM_MANUAL=y
|
|
+# CONFIG_DISCONTIGMEM_MANUAL is not set
|
|
+# CONFIG_SPARSEMEM_MANUAL is not set
|
|
+CONFIG_FLATMEM=y
|
|
+CONFIG_FLAT_NODE_MEM_MAP=y
|
|
+# CONFIG_SPARSEMEM_STATIC is not set
|
|
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
|
+CONFIG_SPLIT_PTLOCK_CPUS=4
|
|
+# CONFIG_RESOURCES_64BIT is not set
|
|
+CONFIG_ZONE_DMA_FLAG=0
|
|
+CONFIG_VIRT_TO_BUS=y
|
|
+# CONFIG_TICK_ONESHOT is not set
|
|
+# CONFIG_NO_HZ is not set
|
|
+# CONFIG_HIGH_RES_TIMERS is not set
|
|
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
+# CONFIG_HZ_48 is not set
|
|
+CONFIG_HZ_100=y
|
|
+# CONFIG_HZ_128 is not set
|
|
+# CONFIG_HZ_250 is not set
|
|
+# CONFIG_HZ_256 is not set
|
|
+# CONFIG_HZ_1000 is not set
|
|
+# CONFIG_HZ_1024 is not set
|
|
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
|
+CONFIG_HZ=100
|
|
+# CONFIG_PREEMPT_NONE is not set
|
|
+# CONFIG_PREEMPT_VOLUNTARY is not set
|
|
+CONFIG_PREEMPT=y
|
|
+CONFIG_PREEMPT_BKL=y
|
|
+# CONFIG_KEXEC is not set
|
|
+CONFIG_SECCOMP=y
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
+
|
|
+#
|
|
+# General setup
|
|
+#
|
|
+CONFIG_EXPERIMENTAL=y
|
|
+CONFIG_BROKEN_ON_SMP=y
|
|
+CONFIG_LOCK_KERNEL=y
|
|
+CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
+CONFIG_LOCALVERSION=""
|
|
+CONFIG_LOCALVERSION_AUTO=y
|
|
+CONFIG_SWAP=y
|
|
+CONFIG_SYSVIPC=y
|
|
+CONFIG_SYSVIPC_SYSCTL=y
|
|
+# CONFIG_POSIX_MQUEUE is not set
|
|
+# CONFIG_BSD_PROCESS_ACCT is not set
|
|
+# CONFIG_TASKSTATS is not set
|
|
+# CONFIG_USER_NS is not set
|
|
+# CONFIG_PID_NS is not set
|
|
+# CONFIG_AUDIT is not set
|
|
+# CONFIG_IKCONFIG is not set
|
|
+CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_CGROUPS is not set
|
|
+CONFIG_FAIR_GROUP_SCHED=y
|
|
+CONFIG_FAIR_USER_SCHED=y
|
|
+# CONFIG_FAIR_CGROUP_SCHED is not set
|
|
+CONFIG_SYSFS_DEPRECATED=y
|
|
+CONFIG_RELAY=y
|
|
+# CONFIG_BLK_DEV_INITRD is not set
|
|
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
|
+CONFIG_SYSCTL=y
|
|
+CONFIG_EMBEDDED=y
|
|
+CONFIG_SYSCTL_SYSCALL=y
|
|
+CONFIG_KALLSYMS=y
|
|
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
|
+CONFIG_HOTPLUG=y
|
|
+CONFIG_PRINTK=y
|
|
+CONFIG_BUG=y
|
|
+CONFIG_ELF_CORE=y
|
|
+CONFIG_BASE_FULL=y
|
|
+CONFIG_FUTEX=y
|
|
+CONFIG_ANON_INODES=y
|
|
+CONFIG_EPOLL=y
|
|
+CONFIG_SIGNALFD=y
|
|
+CONFIG_EVENTFD=y
|
|
+CONFIG_SHMEM=y
|
|
+CONFIG_VM_EVENT_COUNTERS=y
|
|
+CONFIG_SLAB=y
|
|
+# CONFIG_SLUB is not set
|
|
+# CONFIG_SLOB is not set
|
|
+CONFIG_SLABINFO=y
|
|
+CONFIG_RT_MUTEXES=y
|
|
+# CONFIG_TINY_SHMEM is not set
|
|
+CONFIG_BASE_SMALL=0
|
|
+CONFIG_MODULES=y
|
|
+CONFIG_MODULE_UNLOAD=y
|
|
+# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
+CONFIG_MODVERSIONS=y
|
|
+CONFIG_MODULE_SRCVERSION_ALL=y
|
|
+CONFIG_KMOD=y
|
|
+CONFIG_BLOCK=y
|
|
+# CONFIG_LBD is not set
|
|
+# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
+# CONFIG_LSF is not set
|
|
+# CONFIG_BLK_DEV_BSG is not set
|
|
+
|
|
+#
|
|
+# IO Schedulers
|
|
+#
|
|
+CONFIG_IOSCHED_NOOP=y
|
|
+CONFIG_IOSCHED_AS=y
|
|
+CONFIG_IOSCHED_DEADLINE=y
|
|
+CONFIG_IOSCHED_CFQ=y
|
|
+CONFIG_DEFAULT_AS=y
|
|
+# CONFIG_DEFAULT_DEADLINE is not set
|
|
+# CONFIG_DEFAULT_CFQ is not set
|
|
+# CONFIG_DEFAULT_NOOP is not set
|
|
+CONFIG_DEFAULT_IOSCHED="anticipatory"
|
|
+
|
|
+#
|
|
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
|
|
+#
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
+CONFIG_MMU=y
|
|
+# CONFIG_PCCARD is not set
|
|
+
|
|
+#
|
|
+# Executable file formats
|
|
+#
|
|
+CONFIG_BINFMT_ELF=y
|
|
+# CONFIG_BINFMT_MISC is not set
|
|
+CONFIG_TRAD_SIGNALS=y
|
|
+
|
|
+#
|
|
+# CPU Frequency scaling
|
|
+#
|
|
+CONFIG_CPU_FREQ_JZ=y
|
|
+CONFIG_CPU_FREQ=y
|
|
+CONFIG_CPU_FREQ_TABLE=y
|
|
+# CONFIG_CPU_FREQ_DEBUG is not set
|
|
+CONFIG_CPU_FREQ_STAT=y
|
|
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
|
|
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
|
|
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
|
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
|
|
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
|
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
|
|
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
|
|
+
|
|
+#
|
|
+# Power management options
|
|
+#
|
|
+CONFIG_PM=y
|
|
+CONFIG_PM_LEGACY=y
|
|
+# CONFIG_PM_DEBUG is not set
|
|
+CONFIG_SUSPEND_UP_POSSIBLE=y
|
|
+# CONFIG_SUSPEND is not set
|
|
+
|
|
+#
|
|
+# Networking
|
|
+#
|
|
+CONFIG_NET=y
|
|
+
|
|
+#
|
|
+# Networking options
|
|
+#
|
|
+CONFIG_PACKET=y
|
|
+# CONFIG_PACKET_MMAP is not set
|
|
+CONFIG_UNIX=y
|
|
+# CONFIG_NET_KEY is not set
|
|
+CONFIG_INET=y
|
|
+# CONFIG_IP_MULTICAST is not set
|
|
+# CONFIG_IP_ADVANCED_ROUTER is not set
|
|
+CONFIG_IP_FIB_HASH=y
|
|
+CONFIG_IP_PNP=y
|
|
+CONFIG_IP_PNP_DHCP=y
|
|
+CONFIG_IP_PNP_BOOTP=y
|
|
+# CONFIG_IP_PNP_RARP is not set
|
|
+# CONFIG_NET_IPIP is not set
|
|
+# CONFIG_NET_IPGRE is not set
|
|
+# CONFIG_ARPD is not set
|
|
+# CONFIG_SYN_COOKIES is not set
|
|
+# CONFIG_INET_AH is not set
|
|
+# CONFIG_INET_ESP is not set
|
|
+# CONFIG_INET_IPCOMP is not set
|
|
+# CONFIG_INET_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
|
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_BEET is not set
|
|
+# CONFIG_INET_LRO is not set
|
|
+# CONFIG_INET_DIAG is not set
|
|
+# CONFIG_TCP_CONG_ADVANCED is not set
|
|
+CONFIG_TCP_CONG_CUBIC=y
|
|
+CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
+# CONFIG_TCP_MD5SIG is not set
|
|
+# CONFIG_IPV6 is not set
|
|
+# CONFIG_INET6_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET6_TUNNEL is not set
|
|
+# CONFIG_NETWORK_SECMARK is not set
|
|
+# CONFIG_NETFILTER is not set
|
|
+# CONFIG_IP_DCCP is not set
|
|
+# CONFIG_IP_SCTP is not set
|
|
+# CONFIG_TIPC is not set
|
|
+# CONFIG_ATM is not set
|
|
+# CONFIG_BRIDGE is not set
|
|
+# CONFIG_VLAN_8021Q is not set
|
|
+# CONFIG_DECNET is not set
|
|
+# CONFIG_LLC2 is not set
|
|
+# CONFIG_IPX is not set
|
|
+# CONFIG_ATALK is not set
|
|
+# CONFIG_X25 is not set
|
|
+# CONFIG_LAPB is not set
|
|
+# CONFIG_ECONET is not set
|
|
+# CONFIG_WAN_ROUTER is not set
|
|
+# CONFIG_NET_SCHED is not set
|
|
+
|
|
+#
|
|
+# Network testing
|
|
+#
|
|
+# CONFIG_NET_PKTGEN is not set
|
|
+# CONFIG_HAMRADIO is not set
|
|
+# CONFIG_IRDA is not set
|
|
+# CONFIG_BT is not set
|
|
+# CONFIG_AF_RXRPC is not set
|
|
+
|
|
+#
|
|
+# Wireless
|
|
+#
|
|
+# CONFIG_CFG80211 is not set
|
|
+CONFIG_WIRELESS_EXT=y
|
|
+# CONFIG_MAC80211 is not set
|
|
+# CONFIG_IEEE80211 is not set
|
|
+# CONFIG_RFKILL is not set
|
|
+# CONFIG_NET_9P is not set
|
|
+
|
|
+#
|
|
+# Device Drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# Generic Driver Options
|
|
+#
|
|
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
+CONFIG_STANDALONE=y
|
|
+CONFIG_PREVENT_FIRMWARE_BUILD=y
|
|
+# CONFIG_FW_LOADER is not set
|
|
+# CONFIG_SYS_HYPERVISOR is not set
|
|
+# CONFIG_CONNECTOR is not set
|
|
+CONFIG_MTD=y
|
|
+# CONFIG_MTD_DEBUG is not set
|
|
+# CONFIG_MTD_CONCAT is not set
|
|
+CONFIG_MTD_PARTITIONS=y
|
|
+# CONFIG_MTD_REDBOOT_PARTS is not set
|
|
+# CONFIG_MTD_CMDLINE_PARTS is not set
|
|
+
|
|
+#
|
|
+# User Modules And Translation Layers
|
|
+#
|
|
+CONFIG_MTD_CHAR=y
|
|
+CONFIG_MTD_BLKDEVS=y
|
|
+CONFIG_MTD_BLOCK=y
|
|
+# CONFIG_FTL is not set
|
|
+# CONFIG_NFTL is not set
|
|
+# CONFIG_INFTL is not set
|
|
+# CONFIG_RFD_FTL is not set
|
|
+# CONFIG_SSFDC is not set
|
|
+# CONFIG_MTD_OOPS is not set
|
|
+
|
|
+#
|
|
+# RAM/ROM/Flash chip drivers
|
|
+#
|
|
+# CONFIG_MTD_CFI is not set
|
|
+# CONFIG_MTD_JEDECPROBE is not set
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
|
+CONFIG_MTD_CFI_I1=y
|
|
+CONFIG_MTD_CFI_I2=y
|
|
+# CONFIG_MTD_CFI_I4 is not set
|
|
+# CONFIG_MTD_CFI_I8 is not set
|
|
+# CONFIG_MTD_RAM is not set
|
|
+# CONFIG_MTD_ROM is not set
|
|
+# CONFIG_MTD_ABSENT is not set
|
|
+
|
|
+#
|
|
+# Mapping drivers for chip access
|
|
+#
|
|
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
|
+# CONFIG_MTD_PLATRAM is not set
|
|
+
|
|
+#
|
|
+# Self-contained MTD device drivers
|
|
+#
|
|
+# CONFIG_MTD_SLRAM is not set
|
|
+# CONFIG_MTD_PHRAM is not set
|
|
+# CONFIG_MTD_MTDRAM is not set
|
|
+# CONFIG_MTD_BLOCK2MTD is not set
|
|
+
|
|
+#
|
|
+# Disk-On-Chip Device Drivers
|
|
+#
|
|
+# CONFIG_MTD_DOC2000 is not set
|
|
+# CONFIG_MTD_DOC2001 is not set
|
|
+# CONFIG_MTD_DOC2001PLUS is not set
|
|
+CONFIG_MTD_NAND=y
|
|
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
|
|
+# CONFIG_MTD_NAND_ECC_SMC is not set
|
|
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
|
|
+CONFIG_MTD_NAND_IDS=y
|
|
+# CONFIG_MTD_NAND_DISKONCHIP is not set
|
|
+# CONFIG_MTD_NAND_NANDSIM is not set
|
|
+# CONFIG_MTD_NAND_PLATFORM is not set
|
|
+# CONFIG_MTD_ALAUDA is not set
|
|
+CONFIG_MTD_NAND_JZ4740=y
|
|
+# CONFIG_MTD_NAND_CS2 is not set
|
|
+# CONFIG_MTD_NAND_CS3 is not set
|
|
+# CONFIG_MTD_NAND_CS4 is not set
|
|
+CONFIG_MTD_NAND_MULTI_PLANE=y
|
|
+# CONFIG_MTD_HW_HM_ECC is not set
|
|
+# CONFIG_MTD_SW_HM_ECC is not set
|
|
+CONFIG_MTD_HW_RS_ECC=y
|
|
+# CONFIG_MTD_HW_BCH_ECC is not set
|
|
+# CONFIG_MTD_MTDBLOCK_WRITE_VERIFY_ENABLE is not set
|
|
+CONFIG_MTD_OOB_COPIES=3
|
|
+CONFIG_MTD_BADBLOCK_FLAG_PAGE=127
|
|
+# CONFIG_MTD_ONENAND is not set
|
|
+
|
|
+#
|
|
+# UBI - Unsorted block images
|
|
+#
|
|
+CONFIG_MTD_UBI=m
|
|
+CONFIG_MTD_UBI_WL_THRESHOLD=256
|
|
+CONFIG_MTD_UBI_BEB_RESERVE=1
|
|
+# CONFIG_MTD_UBI_GLUEBI is not set
|
|
+
|
|
+#
|
|
+# UBI debugging options
|
|
+#
|
|
+# CONFIG_MTD_UBI_DEBUG is not set
|
|
+CONFIG_MTD_UBI_BLKDEVS=m
|
|
+CONFIG_MTD_UBI_BLOCK=m
|
|
+# CONFIG_PARPORT is not set
|
|
+CONFIG_PNP=y
|
|
+# CONFIG_PNP_DEBUG is not set
|
|
+
|
|
+#
|
|
+# Protocols
|
|
+#
|
|
+# CONFIG_PNPACPI is not set
|
|
+CONFIG_BLK_DEV=y
|
|
+# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
+CONFIG_BLK_DEV_LOOP=y
|
|
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
|
+# CONFIG_BLK_DEV_NBD is not set
|
|
+# CONFIG_BLK_DEV_UB is not set
|
|
+CONFIG_BLK_DEV_RAM=y
|
|
+CONFIG_BLK_DEV_RAM_COUNT=2
|
|
+CONFIG_BLK_DEV_RAM_SIZE=4096
|
|
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
+# CONFIG_CDROM_PKTCDVD is not set
|
|
+# CONFIG_ATA_OVER_ETH is not set
|
|
+CONFIG_MISC_DEVICES=y
|
|
+# CONFIG_EEPROM_93CX6 is not set
|
|
+# CONFIG_IDE is not set
|
|
+
|
|
+#
|
|
+# SCSI device support
|
|
+#
|
|
+# CONFIG_RAID_ATTRS is not set
|
|
+CONFIG_SCSI=y
|
|
+CONFIG_SCSI_DMA=y
|
|
+# CONFIG_SCSI_TGT is not set
|
|
+# CONFIG_SCSI_NETLINK is not set
|
|
+CONFIG_SCSI_PROC_FS=y
|
|
+
|
|
+#
|
|
+# SCSI support type (disk, tape, CD-ROM)
|
|
+#
|
|
+CONFIG_BLK_DEV_SD=y
|
|
+# CONFIG_CHR_DEV_ST is not set
|
|
+# CONFIG_CHR_DEV_OSST is not set
|
|
+# CONFIG_BLK_DEV_SR is not set
|
|
+# CONFIG_CHR_DEV_SG is not set
|
|
+# CONFIG_CHR_DEV_SCH is not set
|
|
+
|
|
+#
|
|
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
|
+#
|
|
+# CONFIG_SCSI_MULTI_LUN is not set
|
|
+# CONFIG_SCSI_CONSTANTS is not set
|
|
+# CONFIG_SCSI_LOGGING is not set
|
|
+# CONFIG_SCSI_SCAN_ASYNC is not set
|
|
+CONFIG_SCSI_WAIT_SCAN=m
|
|
+
|
|
+#
|
|
+# SCSI Transports
|
|
+#
|
|
+# CONFIG_SCSI_SPI_ATTRS is not set
|
|
+# CONFIG_SCSI_FC_ATTRS is not set
|
|
+# CONFIG_SCSI_ISCSI_ATTRS is not set
|
|
+# CONFIG_SCSI_SAS_LIBSAS is not set
|
|
+# CONFIG_SCSI_SRP_ATTRS is not set
|
|
+CONFIG_SCSI_LOWLEVEL=y
|
|
+# CONFIG_ISCSI_TCP is not set
|
|
+# CONFIG_SCSI_DEBUG is not set
|
|
+# CONFIG_ATA is not set
|
|
+# CONFIG_MD is not set
|
|
+CONFIG_NETDEVICES=y
|
|
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
|
+# CONFIG_DUMMY is not set
|
|
+# CONFIG_BONDING is not set
|
|
+# CONFIG_MACVLAN is not set
|
|
+# CONFIG_EQUALIZER is not set
|
|
+# CONFIG_TUN is not set
|
|
+# CONFIG_VETH is not set
|
|
+# CONFIG_NET_SB1000 is not set
|
|
+CONFIG_PHYLIB=y
|
|
+
|
|
+#
|
|
+# MII PHY device drivers
|
|
+#
|
|
+# CONFIG_MARVELL_PHY is not set
|
|
+# CONFIG_DAVICOM_PHY is not set
|
|
+# CONFIG_QSEMI_PHY is not set
|
|
+# CONFIG_LXT_PHY is not set
|
|
+# CONFIG_CICADA_PHY is not set
|
|
+# CONFIG_VITESSE_PHY is not set
|
|
+# CONFIG_SMSC_PHY is not set
|
|
+# CONFIG_BROADCOM_PHY is not set
|
|
+# CONFIG_ICPLUS_PHY is not set
|
|
+# CONFIG_FIXED_PHY is not set
|
|
+# CONFIG_MDIO_BITBANG is not set
|
|
+CONFIG_NET_ETHERNET=y
|
|
+CONFIG_MII=y
|
|
+CONFIG_JZCS8900=y
|
|
+# CONFIG_AX88796 is not set
|
|
+# CONFIG_DM9000 is not set
|
|
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_TAH is not set
|
|
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
|
+# CONFIG_B44 is not set
|
|
+# CONFIG_NETDEV_1000 is not set
|
|
+# CONFIG_NETDEV_10000 is not set
|
|
+
|
|
+#
|
|
+# Wireless LAN
|
|
+#
|
|
+# CONFIG_WLAN_PRE80211 is not set
|
|
+# CONFIG_WLAN_80211 is not set
|
|
+
|
|
+#
|
|
+# USB Network Adapters
|
|
+#
|
|
+# CONFIG_USB_CATC is not set
|
|
+# CONFIG_USB_KAWETH is not set
|
|
+# CONFIG_USB_PEGASUS is not set
|
|
+# CONFIG_USB_RTL8150 is not set
|
|
+# CONFIG_USB_USBNET is not set
|
|
+# CONFIG_WAN is not set
|
|
+# CONFIG_PPP is not set
|
|
+# CONFIG_SLIP is not set
|
|
+# CONFIG_SHAPER is not set
|
|
+# CONFIG_NETCONSOLE is not set
|
|
+# CONFIG_NETPOLL is not set
|
|
+# CONFIG_NET_POLL_CONTROLLER is not set
|
|
+# CONFIG_ISDN is not set
|
|
+# CONFIG_PHONE is not set
|
|
+
|
|
+#
|
|
+# Input device support
|
|
+#
|
|
+CONFIG_INPUT=y
|
|
+# CONFIG_INPUT_FF_MEMLESS is not set
|
|
+# CONFIG_INPUT_POLLDEV is not set
|
|
+
|
|
+#
|
|
+# Userland interfaces
|
|
+#
|
|
+CONFIG_INPUT_MOUSEDEV=y
|
|
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
|
+# CONFIG_INPUT_JOYDEV is not set
|
|
+CONFIG_INPUT_EVDEV=y
|
|
+# CONFIG_INPUT_EVBUG is not set
|
|
+
|
|
+#
|
|
+# Input Device Drivers
|
|
+#
|
|
+# CONFIG_INPUT_KEYBOARD is not set
|
|
+# CONFIG_INPUT_MOUSE is not set
|
|
+# CONFIG_INPUT_JOYSTICK is not set
|
|
+# CONFIG_INPUT_TABLET is not set
|
|
+# CONFIG_INPUT_TOUCHSCREEN is not set
|
|
+# CONFIG_INPUT_MISC is not set
|
|
+
|
|
+#
|
|
+# Hardware I/O ports
|
|
+#
|
|
+CONFIG_SERIO=y
|
|
+# CONFIG_SERIO_I8042 is not set
|
|
+CONFIG_SERIO_SERPORT=y
|
|
+# CONFIG_SERIO_LIBPS2 is not set
|
|
+# CONFIG_SERIO_RAW is not set
|
|
+# CONFIG_GAMEPORT is not set
|
|
+
|
|
+#
|
|
+# Character devices
|
|
+#
|
|
+CONFIG_VT=y
|
|
+CONFIG_VT_CONSOLE=y
|
|
+CONFIG_HW_CONSOLE=y
|
|
+CONFIG_VT_HW_CONSOLE_BINDING=y
|
|
+# CONFIG_SERIAL_NONSTANDARD is not set
|
|
+
|
|
+#
|
|
+# Serial drivers
|
|
+#
|
|
+CONFIG_SERIAL_8250=y
|
|
+CONFIG_SERIAL_8250_CONSOLE=y
|
|
+CONFIG_SERIAL_8250_PNP=y
|
|
+CONFIG_SERIAL_8250_NR_UARTS=2
|
|
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
|
|
+# CONFIG_SERIAL_8250_EXTENDED is not set
|
|
+
|
|
+#
|
|
+# Non-8250 serial port support
|
|
+#
|
|
+CONFIG_SERIAL_CORE=y
|
|
+CONFIG_SERIAL_CORE_CONSOLE=y
|
|
+CONFIG_UNIX98_PTYS=y
|
|
+CONFIG_LEGACY_PTYS=y
|
|
+CONFIG_LEGACY_PTY_COUNT=2
|
|
+# CONFIG_IPMI_HANDLER is not set
|
|
+# CONFIG_HW_RANDOM is not set
|
|
+# CONFIG_RTC is not set
|
|
+# CONFIG_RTC_PCF8563 is not set
|
|
+CONFIG_RTC_JZ=y
|
|
+# CONFIG_R3964 is not set
|
|
+# CONFIG_RAW_DRIVER is not set
|
|
+# CONFIG_TCG_TPM is not set
|
|
+
|
|
+#
|
|
+# JZSOC char device support
|
|
+#
|
|
+CONFIG_JZCHAR=y
|
|
+# CONFIG_JZ_CIM is not set
|
|
+# CONFIG_JZ_TPANEL_ATA2508 is not set
|
|
+CONFIG_JZ_TPANEL=y
|
|
+CONFIG_JZ_SADC=y
|
|
+# CONFIG_JZ_TPANEL_AK4182 is not set
|
|
+# CONFIG_JZ_TPANEL_UCB1400 is not set
|
|
+# CONFIG_JZ_TPANEL_WM9712 is not set
|
|
+CONFIG_JZ_UDC_HOTPLUG=y
|
|
+CONFIG_JZ_POWEROFF=y
|
|
+# CONFIG_JZ_OW is not set
|
|
+# CONFIG_I2C is not set
|
|
+
|
|
+#
|
|
+# SPI support
|
|
+#
|
|
+# CONFIG_SPI is not set
|
|
+# CONFIG_SPI_MASTER is not set
|
|
+# CONFIG_W1 is not set
|
|
+# CONFIG_POWER_SUPPLY is not set
|
|
+# CONFIG_HWMON is not set
|
|
+CONFIG_WATCHDOG=y
|
|
+# CONFIG_WATCHDOG_NOWAYOUT is not set
|
|
+
|
|
+#
|
|
+# Watchdog Device Drivers
|
|
+#
|
|
+CONFIG_JZ_WDT=y
|
|
+# CONFIG_SOFT_WATCHDOG is not set
|
|
+
|
|
+#
|
|
+# USB-based Watchdog Cards
|
|
+#
|
|
+# CONFIG_USBPCWATCHDOG is not set
|
|
+
|
|
+#
|
|
+# Sonics Silicon Backplane
|
|
+#
|
|
+CONFIG_SSB_POSSIBLE=y
|
|
+# CONFIG_SSB is not set
|
|
+
|
|
+#
|
|
+# Multifunction device drivers
|
|
+#
|
|
+# CONFIG_MFD_SM501 is not set
|
|
+
|
|
+#
|
|
+# Multimedia devices
|
|
+#
|
|
+CONFIG_VIDEO_DEV=y
|
|
+CONFIG_VIDEO_V4L1=y
|
|
+CONFIG_VIDEO_V4L1_COMPAT=y
|
|
+CONFIG_VIDEO_V4L2=y
|
|
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
|
|
+# CONFIG_VIDEO_ADV_DEBUG is not set
|
|
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
|
|
+# CONFIG_VIDEO_VIVI is not set
|
|
+# CONFIG_VIDEO_CPIA is not set
|
|
+# CONFIG_VIDEO_CPIA2 is not set
|
|
+CONFIG_VIDEO_JZ_CIM=y
|
|
+CONFIG_VIDEO_JZ_SENSOR=y
|
|
+CONFIG_V4L_USB_DRIVERS=y
|
|
+# CONFIG_USB_VICAM is not set
|
|
+# CONFIG_USB_IBMCAM is not set
|
|
+# CONFIG_USB_KONICAWC is not set
|
|
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
|
|
+# CONFIG_USB_ET61X251 is not set
|
|
+# CONFIG_USB_OV511 is not set
|
|
+# CONFIG_USB_SE401 is not set
|
|
+# CONFIG_USB_SN9C102 is not set
|
|
+# CONFIG_USB_STV680 is not set
|
|
+# CONFIG_USB_ZC0301 is not set
|
|
+# CONFIG_USB_PWC is not set
|
|
+# CONFIG_USB_ZR364XX is not set
|
|
+CONFIG_RADIO_ADAPTERS=y
|
|
+# CONFIG_USB_DSBR is not set
|
|
+# CONFIG_DVB_CORE is not set
|
|
+# CONFIG_DAB is not set
|
|
+
|
|
+#
|
|
+# Graphics support
|
|
+#
|
|
+# CONFIG_VGASTATE is not set
|
|
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
|
+CONFIG_FB=y
|
|
+# CONFIG_FIRMWARE_EDID is not set
|
|
+# CONFIG_FB_DDC is not set
|
|
+CONFIG_FB_CFB_FILLRECT=y
|
|
+CONFIG_FB_CFB_COPYAREA=y
|
|
+CONFIG_FB_CFB_IMAGEBLIT=y
|
|
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
|
|
+# CONFIG_FB_SYS_FILLRECT is not set
|
|
+# CONFIG_FB_SYS_COPYAREA is not set
|
|
+# CONFIG_FB_SYS_IMAGEBLIT is not set
|
|
+# CONFIG_FB_SYS_FOPS is not set
|
|
+CONFIG_FB_DEFERRED_IO=y
|
|
+# CONFIG_FB_SVGALIB is not set
|
|
+# CONFIG_FB_MACMODES is not set
|
|
+# CONFIG_FB_BACKLIGHT is not set
|
|
+# CONFIG_FB_MODE_HELPERS is not set
|
|
+# CONFIG_FB_TILEBLITTING is not set
|
|
+
|
|
+#
|
|
+# Frame buffer hardware drivers
|
|
+#
|
|
+CONFIG_FB_JZSOC=y
|
|
+# CONFIG_FB_JZ4740_SLCD is not set
|
|
+CONFIG_FB_JZLCD_4730_4740=y
|
|
+CONFIG_JZLCD_FRAMEBUFFER_MAX=1
|
|
+# CONFIG_JZLCD_FRAMEBUFFER_ROTATE_SUPPORT is not set
|
|
+# CONFIG_JZLCD_SHARP_LQ035Q7 is not set
|
|
+# CONFIG_JZLCD_SAMSUNG_LTS350Q1 is not set
|
|
+# CONFIG_JZLCD_SAMSUNG_LTV350QVF04 is not set
|
|
+# CONFIG_JZLCD_SAMSUNG_LTP400WQF01 is not set
|
|
+CONFIG_JZLCD_SAMSUNG_LTP400WQF02=y
|
|
+# CONFIG_JZLCD_AUO_A030FL01_V1 is not set
|
|
+# CONFIG_JZLCD_TRULY_TFTG320240DTSW is not set
|
|
+# CONFIG_JZLCD_TRULY_TFTG320240DTSW_SERIAL is not set
|
|
+# CONFIG_JZLCD_TRULY_TFTG240320UTSW_63W_E is not set
|
|
+# CONFIG_JZLCD_FOXCONN_PT035TN01 is not set
|
|
+# CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL is not set
|
|
+# CONFIG_JZLCD_TOSHIBA_LTM084P363 is not set
|
|
+# CONFIG_JZLCD_HYNIX_HT10X21 is not set
|
|
+# CONFIG_JZLCD_INNOLUX_AT080TN42 is not set
|
|
+# CONFIG_JZLCD_CSTN_800x600 is not set
|
|
+# CONFIG_JZLCD_CSTN_320x240 is not set
|
|
+# CONFIG_JZLCD_MSTN_480x320 is not set
|
|
+# CONFIG_JZLCD_MSTN_320x240 is not set
|
|
+# CONFIG_JZLCD_MSTN_240x128 is not set
|
|
+# CONFIG_FB_S1D13XXX is not set
|
|
+# CONFIG_FB_VIRTUAL is not set
|
|
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Display device support
|
|
+#
|
|
+# CONFIG_DISPLAY_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Console display driver support
|
|
+#
|
|
+# CONFIG_VGA_CONSOLE is not set
|
|
+CONFIG_DUMMY_CONSOLE=y
|
|
+CONFIG_FRAMEBUFFER_CONSOLE=y
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE_CURSOR_FLASH is not set
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
|
|
+CONFIG_FONTS=y
|
|
+CONFIG_FONT_8x8=y
|
|
+CONFIG_FONT_8x16=y
|
|
+# CONFIG_FONT_6x11 is not set
|
|
+# CONFIG_FONT_7x14 is not set
|
|
+# CONFIG_FONT_PEARL_8x8 is not set
|
|
+# CONFIG_FONT_ACORN_8x8 is not set
|
|
+# CONFIG_FONT_MINI_4x6 is not set
|
|
+# CONFIG_FONT_SUN8x16 is not set
|
|
+# CONFIG_FONT_SUN12x22 is not set
|
|
+# CONFIG_FONT_10x18 is not set
|
|
+CONFIG_LOGO=y
|
|
+CONFIG_LOGO_LINUX_MONO=y
|
|
+CONFIG_LOGO_LINUX_VGA16=y
|
|
+CONFIG_LOGO_LINUX_CLUT224=y
|
|
+
|
|
+#
|
|
+# Sound
|
|
+#
|
|
+CONFIG_SOUND=y
|
|
+
|
|
+#
|
|
+# Advanced Linux Sound Architecture
|
|
+#
|
|
+# CONFIG_SND is not set
|
|
+
|
|
+#
|
|
+# Open Sound System
|
|
+#
|
|
+CONFIG_SOUND_PRIME=y
|
|
+CONFIG_OSS_OBSOLETE=y
|
|
+# CONFIG_SOUND_JZ_AC97 is not set
|
|
+CONFIG_SOUND_JZ_I2S=y
|
|
+# CONFIG_SOUND_JZ_PCM is not set
|
|
+# CONFIG_I2S_AK4642EN is not set
|
|
+CONFIG_I2S_ICODEC=y
|
|
+# CONFIG_I2S_DLV is not set
|
|
+# CONFIG_SOUND_MSNDCLAS is not set
|
|
+# CONFIG_SOUND_MSNDPIN is not set
|
|
+CONFIG_HID_SUPPORT=y
|
|
+CONFIG_HID=y
|
|
+# CONFIG_HID_DEBUG is not set
|
|
+# CONFIG_HIDRAW is not set
|
|
+
|
|
+#
|
|
+# USB Input Devices
|
|
+#
|
|
+CONFIG_USB_HID=y
|
|
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
|
|
+# CONFIG_HID_FF is not set
|
|
+# CONFIG_USB_HIDDEV is not set
|
|
+CONFIG_USB_SUPPORT=y
|
|
+CONFIG_USB_ARCH_HAS_HCD=y
|
|
+CONFIG_USB_ARCH_HAS_OHCI=y
|
|
+# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
+CONFIG_USB=y
|
|
+# CONFIG_USB_DEBUG is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous USB options
|
|
+#
|
|
+# CONFIG_USB_DEVICEFS is not set
|
|
+CONFIG_USB_DEVICE_CLASS=y
|
|
+# CONFIG_USB_DYNAMIC_MINORS is not set
|
|
+# CONFIG_USB_SUSPEND is not set
|
|
+# CONFIG_USB_PERSIST is not set
|
|
+# CONFIG_USB_OTG is not set
|
|
+
|
|
+#
|
|
+# USB Host Controller Drivers
|
|
+#
|
|
+# CONFIG_USB_ISP116X_HCD is not set
|
|
+CONFIG_USB_OHCI_HCD=y
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
|
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
|
+# CONFIG_USB_SL811_HCD is not set
|
|
+# CONFIG_USB_R8A66597_HCD is not set
|
|
+
|
|
+#
|
|
+# USB Device Class drivers
|
|
+#
|
|
+# CONFIG_USB_ACM is not set
|
|
+# CONFIG_USB_PRINTER is not set
|
|
+
|
|
+#
|
|
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
+#
|
|
+
|
|
+#
|
|
+# may also be needed; see USB_STORAGE Help for more information
|
|
+#
|
|
+CONFIG_USB_STORAGE=y
|
|
+# CONFIG_USB_STORAGE_DEBUG is not set
|
|
+# CONFIG_USB_STORAGE_DATAFAB is not set
|
|
+# CONFIG_USB_STORAGE_FREECOM is not set
|
|
+# CONFIG_USB_STORAGE_ISD200 is not set
|
|
+# CONFIG_USB_STORAGE_DPCM is not set
|
|
+# CONFIG_USB_STORAGE_USBAT is not set
|
|
+# CONFIG_USB_STORAGE_SDDR09 is not set
|
|
+# CONFIG_USB_STORAGE_SDDR55 is not set
|
|
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
|
|
+# CONFIG_USB_STORAGE_ALAUDA is not set
|
|
+# CONFIG_USB_STORAGE_KARMA is not set
|
|
+# CONFIG_USB_LIBUSUAL is not set
|
|
+
|
|
+#
|
|
+# USB Imaging devices
|
|
+#
|
|
+# CONFIG_USB_MDC800 is not set
|
|
+# CONFIG_USB_MICROTEK is not set
|
|
+CONFIG_USB_MON=y
|
|
+
|
|
+#
|
|
+# USB port drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Serial Converter support
|
|
+#
|
|
+# CONFIG_USB_SERIAL is not set
|
|
+
|
|
+#
|
|
+# USB Miscellaneous drivers
|
|
+#
|
|
+# CONFIG_USB_EMI62 is not set
|
|
+# CONFIG_USB_EMI26 is not set
|
|
+# CONFIG_USB_ADUTUX is not set
|
|
+# CONFIG_USB_AUERSWALD is not set
|
|
+# CONFIG_USB_RIO500 is not set
|
|
+# CONFIG_USB_LEGOTOWER is not set
|
|
+# CONFIG_USB_LCD is not set
|
|
+# CONFIG_USB_BERRY_CHARGE is not set
|
|
+# CONFIG_USB_LED is not set
|
|
+# CONFIG_USB_CYPRESS_CY7C63 is not set
|
|
+# CONFIG_USB_CYTHERM is not set
|
|
+# CONFIG_USB_PHIDGET is not set
|
|
+# CONFIG_USB_IDMOUSE is not set
|
|
+# CONFIG_USB_FTDI_ELAN is not set
|
|
+# CONFIG_USB_APPLEDISPLAY is not set
|
|
+# CONFIG_USB_LD is not set
|
|
+# CONFIG_USB_TRANCEVIBRATOR is not set
|
|
+# CONFIG_USB_IOWARRIOR is not set
|
|
+
|
|
+#
|
|
+# USB DSL modem support
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Gadget Support
|
|
+#
|
|
+CONFIG_USB_GADGET=m
|
|
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
|
+# CONFIG_USB_GADGET_DEBUG_FS is not set
|
|
+CONFIG_USB_GADGET_SELECTED=y
|
|
+CONFIG_USB_GADGET_JZ4740=y
|
|
+CONFIG_USB_JZ4740=m
|
|
+# CONFIG_USB_GADGET_JZ4730 is not set
|
|
+# CONFIG_USB_GADGET_AMD5536UDC is not set
|
|
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
|
|
+# CONFIG_USB_GADGET_FSL_USB2 is not set
|
|
+# CONFIG_USB_GADGET_NET2280 is not set
|
|
+# CONFIG_USB_GADGET_PXA2XX is not set
|
|
+# CONFIG_USB_GADGET_M66592 is not set
|
|
+# CONFIG_USB_GADGET_GOKU is not set
|
|
+# CONFIG_USB_GADGET_LH7A40X is not set
|
|
+# CONFIG_USB_GADGET_OMAP is not set
|
|
+# CONFIG_USB_GADGET_S3C2410 is not set
|
|
+# CONFIG_USB_GADGET_AT91 is not set
|
|
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
|
|
+CONFIG_USB_GADGET_DUALSPEED=y
|
|
+# CONFIG_USB_ZERO is not set
|
|
+# CONFIG_USB_ETH is not set
|
|
+# CONFIG_USB_GADGETFS is not set
|
|
+CONFIG_USB_FILE_STORAGE=m
|
|
+# CONFIG_USB_FILE_STORAGE_TEST is not set
|
|
+# CONFIG_USB_G_SERIAL is not set
|
|
+# CONFIG_USB_MIDI_GADGET is not set
|
|
+CONFIG_MMC=y
|
|
+# CONFIG_MMC_DEBUG is not set
|
|
+# CONFIG_MMC_UNSAFE_RESUME is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Card Drivers
|
|
+#
|
|
+CONFIG_MMC_BLOCK=y
|
|
+CONFIG_MMC_BLOCK_BOUNCE=y
|
|
+# CONFIG_SDIO_UART is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Host Controller Drivers
|
|
+#
|
|
+CONFIG_MMC_JZ=y
|
|
+# CONFIG_JZ_MMC_BUS_1 is not set
|
|
+CONFIG_JZ_MMC_BUS_4=y
|
|
+# CONFIG_NEW_LEDS is not set
|
|
+CONFIG_RTC_LIB=y
|
|
+# CONFIG_RTC_CLASS is not set
|
|
+
|
|
+#
|
|
+# Userspace I/O
|
|
+#
|
|
+# CONFIG_UIO is not set
|
|
+
|
|
+#
|
|
+# File systems
|
|
+#
|
|
+CONFIG_EXT2_FS=y
|
|
+CONFIG_EXT2_FS_XATTR=y
|
|
+# CONFIG_EXT2_FS_POSIX_ACL is not set
|
|
+# CONFIG_EXT2_FS_SECURITY is not set
|
|
+# CONFIG_EXT2_FS_XIP is not set
|
|
+# CONFIG_EXT3_FS is not set
|
|
+# CONFIG_EXT4DEV_FS is not set
|
|
+CONFIG_FS_MBCACHE=y
|
|
+# CONFIG_REISERFS_FS is not set
|
|
+# CONFIG_JFS_FS is not set
|
|
+CONFIG_FS_POSIX_ACL=y
|
|
+# CONFIG_XFS_FS is not set
|
|
+# CONFIG_GFS2_FS is not set
|
|
+# CONFIG_OCFS2_FS is not set
|
|
+CONFIG_MINIX_FS=y
|
|
+# CONFIG_ROMFS_FS is not set
|
|
+CONFIG_INOTIFY=y
|
|
+CONFIG_INOTIFY_USER=y
|
|
+# CONFIG_QUOTA is not set
|
|
+CONFIG_DNOTIFY=y
|
|
+# CONFIG_AUTOFS_FS is not set
|
|
+# CONFIG_AUTOFS4_FS is not set
|
|
+# CONFIG_FUSE_FS is not set
|
|
+
|
|
+#
|
|
+# CD-ROM/DVD Filesystems
|
|
+#
|
|
+# CONFIG_ISO9660_FS is not set
|
|
+# CONFIG_UDF_FS is not set
|
|
+
|
|
+#
|
|
+# DOS/FAT/NT Filesystems
|
|
+#
|
|
+CONFIG_FAT_FS=y
|
|
+CONFIG_MSDOS_FS=y
|
|
+CONFIG_VFAT_FS=y
|
|
+CONFIG_FAT_DEFAULT_CODEPAGE=437
|
|
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
|
+# CONFIG_NTFS_FS is not set
|
|
+
|
|
+#
|
|
+# Pseudo filesystems
|
|
+#
|
|
+CONFIG_PROC_FS=y
|
|
+CONFIG_PROC_KCORE=y
|
|
+CONFIG_PROC_SYSCTL=y
|
|
+CONFIG_SYSFS=y
|
|
+CONFIG_TMPFS=y
|
|
+# CONFIG_TMPFS_POSIX_ACL is not set
|
|
+# CONFIG_HUGETLB_PAGE is not set
|
|
+# CONFIG_CONFIGFS_FS is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous filesystems
|
|
+#
|
|
+# CONFIG_ADFS_FS is not set
|
|
+# CONFIG_AFFS_FS is not set
|
|
+# CONFIG_HFS_FS is not set
|
|
+# CONFIG_HFSPLUS_FS is not set
|
|
+# CONFIG_BEFS_FS is not set
|
|
+# CONFIG_BFS_FS is not set
|
|
+# CONFIG_EFS_FS is not set
|
|
+# CONFIG_JFFS2_FS is not set
|
|
+CONFIG_UBIFS_FS=m
|
|
+# CONFIG_UBIFS_FS_XATTR is not set
|
|
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
|
|
+CONFIG_UBIFS_FS_LZO=y
|
|
+CONFIG_UBIFS_FS_ZLIB=y
|
|
+# CONFIG_UBIFS_FS_DEBUG is not set
|
|
+# CONFIG_CRAMFS is not set
|
|
+# CONFIG_VXFS_FS is not set
|
|
+# CONFIG_HPFS_FS is not set
|
|
+# CONFIG_QNX4FS_FS is not set
|
|
+# CONFIG_SYSV_FS is not set
|
|
+# CONFIG_UFS_FS is not set
|
|
+CONFIG_NETWORK_FILESYSTEMS=y
|
|
+CONFIG_NFS_FS=y
|
|
+CONFIG_NFS_V3=y
|
|
+CONFIG_NFS_V3_ACL=y
|
|
+CONFIG_NFS_V4=y
|
|
+CONFIG_NFS_DIRECTIO=y
|
|
+# CONFIG_NFSD is not set
|
|
+CONFIG_ROOT_NFS=y
|
|
+CONFIG_LOCKD=y
|
|
+CONFIG_LOCKD_V4=y
|
|
+CONFIG_NFS_ACL_SUPPORT=y
|
|
+CONFIG_NFS_COMMON=y
|
|
+CONFIG_SUNRPC=y
|
|
+CONFIG_SUNRPC_GSS=y
|
|
+# CONFIG_SUNRPC_BIND34 is not set
|
|
+CONFIG_RPCSEC_GSS_KRB5=y
|
|
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
|
+# CONFIG_SMB_FS is not set
|
|
+# CONFIG_CIFS is not set
|
|
+# CONFIG_NCP_FS is not set
|
|
+# CONFIG_CODA_FS is not set
|
|
+# CONFIG_AFS_FS is not set
|
|
+
|
|
+#
|
|
+# Partition Types
|
|
+#
|
|
+CONFIG_PARTITION_ADVANCED=y
|
|
+# CONFIG_ACORN_PARTITION is not set
|
|
+# CONFIG_OSF_PARTITION is not set
|
|
+# CONFIG_AMIGA_PARTITION is not set
|
|
+# CONFIG_ATARI_PARTITION is not set
|
|
+# CONFIG_MAC_PARTITION is not set
|
|
+CONFIG_MSDOS_PARTITION=y
|
|
+# CONFIG_BSD_DISKLABEL is not set
|
|
+# CONFIG_MINIX_SUBPARTITION is not set
|
|
+# CONFIG_SOLARIS_X86_PARTITION is not set
|
|
+# CONFIG_UNIXWARE_DISKLABEL is not set
|
|
+# CONFIG_LDM_PARTITION is not set
|
|
+# CONFIG_SGI_PARTITION is not set
|
|
+# CONFIG_ULTRIX_PARTITION is not set
|
|
+# CONFIG_SUN_PARTITION is not set
|
|
+# CONFIG_KARMA_PARTITION is not set
|
|
+# CONFIG_EFI_PARTITION is not set
|
|
+# CONFIG_SYSV68_PARTITION is not set
|
|
+CONFIG_NLS=y
|
|
+CONFIG_NLS_DEFAULT="iso8859-1"
|
|
+CONFIG_NLS_CODEPAGE_437=y
|
|
+# CONFIG_NLS_CODEPAGE_737 is not set
|
|
+# CONFIG_NLS_CODEPAGE_775 is not set
|
|
+# CONFIG_NLS_CODEPAGE_850 is not set
|
|
+# CONFIG_NLS_CODEPAGE_852 is not set
|
|
+# CONFIG_NLS_CODEPAGE_855 is not set
|
|
+# CONFIG_NLS_CODEPAGE_857 is not set
|
|
+# CONFIG_NLS_CODEPAGE_860 is not set
|
|
+# CONFIG_NLS_CODEPAGE_861 is not set
|
|
+# CONFIG_NLS_CODEPAGE_862 is not set
|
|
+# CONFIG_NLS_CODEPAGE_863 is not set
|
|
+# CONFIG_NLS_CODEPAGE_864 is not set
|
|
+# CONFIG_NLS_CODEPAGE_865 is not set
|
|
+# CONFIG_NLS_CODEPAGE_866 is not set
|
|
+# CONFIG_NLS_CODEPAGE_869 is not set
|
|
+CONFIG_NLS_CODEPAGE_936=y
|
|
+# CONFIG_NLS_CODEPAGE_950 is not set
|
|
+# CONFIG_NLS_CODEPAGE_932 is not set
|
|
+# CONFIG_NLS_CODEPAGE_949 is not set
|
|
+# CONFIG_NLS_CODEPAGE_874 is not set
|
|
+# CONFIG_NLS_ISO8859_8 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1250 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1251 is not set
|
|
+CONFIG_NLS_ASCII=y
|
|
+CONFIG_NLS_ISO8859_1=y
|
|
+# CONFIG_NLS_ISO8859_2 is not set
|
|
+# CONFIG_NLS_ISO8859_3 is not set
|
|
+# CONFIG_NLS_ISO8859_4 is not set
|
|
+# CONFIG_NLS_ISO8859_5 is not set
|
|
+# CONFIG_NLS_ISO8859_6 is not set
|
|
+# CONFIG_NLS_ISO8859_7 is not set
|
|
+# CONFIG_NLS_ISO8859_9 is not set
|
|
+# CONFIG_NLS_ISO8859_13 is not set
|
|
+# CONFIG_NLS_ISO8859_14 is not set
|
|
+# CONFIG_NLS_ISO8859_15 is not set
|
|
+# CONFIG_NLS_KOI8_R is not set
|
|
+# CONFIG_NLS_KOI8_U is not set
|
|
+# CONFIG_NLS_UTF8 is not set
|
|
+# CONFIG_DLM is not set
|
|
+
|
|
+#
|
|
+# Yaffs2 Filesystems
|
|
+#
|
|
+CONFIG_YAFFS_FS=y
|
|
+CONFIG_YAFFS_YAFFS1=y
|
|
+# CONFIG_YAFFS_DOES_ECC is not set
|
|
+CONFIG_YAFFS_YAFFS2=y
|
|
+# CONFIG_YAFFS_ECC_BCH is not set
|
|
+CONFIG_YAFFS_ECC_RS=y
|
|
+# CONFIG_YAFFS_ECC_HAMMING is not set
|
|
+CONFIG_YAFFS_AUTO_YAFFS2=y
|
|
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
|
|
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
|
|
+CONFIG_YAFFS_DISABLE_CHUNK_ERASED_CHECK=y
|
|
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
|
|
+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
|
|
+CONFIG_INSTRUMENTATION=y
|
|
+# CONFIG_PROFILING is not set
|
|
+# CONFIG_MARKERS is not set
|
|
+
|
|
+#
|
|
+# Kernel hacking
|
|
+#
|
|
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
+# CONFIG_PRINTK_TIME is not set
|
|
+CONFIG_ENABLE_WARN_DEPRECATED=y
|
|
+CONFIG_ENABLE_MUST_CHECK=y
|
|
+CONFIG_MAGIC_SYSRQ=y
|
|
+# CONFIG_UNUSED_SYMBOLS is not set
|
|
+CONFIG_DEBUG_FS=y
|
|
+# CONFIG_HEADERS_CHECK is not set
|
|
+# CONFIG_DEBUG_KERNEL is not set
|
|
+# CONFIG_SAMPLES is not set
|
|
+CONFIG_CMDLINE=""
|
|
+
|
|
+#
|
|
+# Security options
|
|
+#
|
|
+# CONFIG_KEYS is not set
|
|
+# CONFIG_SECURITY is not set
|
|
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
|
+CONFIG_CRYPTO=y
|
|
+CONFIG_CRYPTO_ALGAPI=y
|
|
+CONFIG_CRYPTO_BLKCIPHER=y
|
|
+CONFIG_CRYPTO_MANAGER=y
|
|
+# CONFIG_CRYPTO_HMAC is not set
|
|
+# CONFIG_CRYPTO_XCBC is not set
|
|
+# CONFIG_CRYPTO_NULL is not set
|
|
+# CONFIG_CRYPTO_MD4 is not set
|
|
+CONFIG_CRYPTO_MD5=y
|
|
+# CONFIG_CRYPTO_SHA1 is not set
|
|
+# CONFIG_CRYPTO_SHA256 is not set
|
|
+# CONFIG_CRYPTO_SHA512 is not set
|
|
+# CONFIG_CRYPTO_WP512 is not set
|
|
+# CONFIG_CRYPTO_TGR192 is not set
|
|
+# CONFIG_CRYPTO_GF128MUL is not set
|
|
+# CONFIG_CRYPTO_ECB is not set
|
|
+CONFIG_CRYPTO_CBC=y
|
|
+# CONFIG_CRYPTO_PCBC is not set
|
|
+# CONFIG_CRYPTO_LRW is not set
|
|
+# CONFIG_CRYPTO_XTS is not set
|
|
+# CONFIG_CRYPTO_CRYPTD is not set
|
|
+CONFIG_CRYPTO_DES=y
|
|
+# CONFIG_CRYPTO_FCRYPT is not set
|
|
+# CONFIG_CRYPTO_BLOWFISH is not set
|
|
+# CONFIG_CRYPTO_TWOFISH is not set
|
|
+# CONFIG_CRYPTO_SERPENT is not set
|
|
+# CONFIG_CRYPTO_AES is not set
|
|
+# CONFIG_CRYPTO_CAST5 is not set
|
|
+# CONFIG_CRYPTO_CAST6 is not set
|
|
+# CONFIG_CRYPTO_TEA is not set
|
|
+# CONFIG_CRYPTO_ARC4 is not set
|
|
+# CONFIG_CRYPTO_KHAZAD is not set
|
|
+# CONFIG_CRYPTO_ANUBIS is not set
|
|
+# CONFIG_CRYPTO_SEED is not set
|
|
+CONFIG_CRYPTO_DEFLATE=m
|
|
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
|
|
+# CONFIG_CRYPTO_CRC32C is not set
|
|
+# CONFIG_CRYPTO_CAMELLIA is not set
|
|
+# CONFIG_CRYPTO_TEST is not set
|
|
+# CONFIG_CRYPTO_AUTHENC is not set
|
|
+CONFIG_CRYPTO_LZO=m
|
|
+CONFIG_CRYPTO_HW=y
|
|
+
|
|
+#
|
|
+# Library routines
|
|
+#
|
|
+CONFIG_BITREVERSE=y
|
|
+# CONFIG_CRC_CCITT is not set
|
|
+CONFIG_CRC16=m
|
|
+# CONFIG_CRC_ITU_T is not set
|
|
+CONFIG_CRC32=y
|
|
+# CONFIG_CRC7 is not set
|
|
+# CONFIG_LIBCRC32C is not set
|
|
+CONFIG_ZLIB_INFLATE=m
|
|
+CONFIG_ZLIB_DEFLATE=m
|
|
+CONFIG_LZO_COMPRESS=m
|
|
+CONFIG_LZO_DECOMPRESS=m
|
|
+CONFIG_REED_SOLOMON=y
|
|
+CONFIG_REED_SOLOMON_ENC8=y
|
|
+CONFIG_REED_SOLOMON_DEC8=y
|
|
+CONFIG_PLIST=y
|
|
+CONFIG_HAS_IOMEM=y
|
|
+CONFIG_HAS_IOPORT=y
|
|
+CONFIG_HAS_DMA=y
|
|
--- linux-2.6.24.7.old/arch/mips/configs/pmp_defconfig 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/configs/pmp_defconfig 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,1212 @@
|
|
+#
|
|
+# Automatically generated make config: don't edit
|
|
+# Linux kernel version: 2.6.24.3
|
|
+# Thu Jun 12 13:37:10 2008
|
|
+#
|
|
+CONFIG_MIPS=y
|
|
+
|
|
+#
|
|
+# Machine selection
|
|
+#
|
|
+CONFIG_JZ4730_PMP=y
|
|
+# CONFIG_JZ4740_PAVO is not set
|
|
+# CONFIG_JZ4740_LEO is not set
|
|
+# CONFIG_JZ4740_LYRA is not set
|
|
+# CONFIG_JZ4725_DIPPER is not set
|
|
+# CONFIG_JZ4720_VIRGO is not set
|
|
+# CONFIG_JZ4750_FUWA is not set
|
|
+# CONFIG_MACH_ALCHEMY is not set
|
|
+# CONFIG_BASLER_EXCITE is not set
|
|
+# CONFIG_BCM47XX is not set
|
|
+# CONFIG_MIPS_COBALT is not set
|
|
+# CONFIG_MACH_DECSTATION is not set
|
|
+# CONFIG_MACH_JAZZ is not set
|
|
+# CONFIG_LASAT is not set
|
|
+# CONFIG_LEMOTE_FULONG is not set
|
|
+# CONFIG_MIPS_ATLAS is not set
|
|
+# CONFIG_MIPS_MALTA is not set
|
|
+# CONFIG_MIPS_SEAD is not set
|
|
+# CONFIG_MIPS_SIM is not set
|
|
+# CONFIG_MARKEINS is not set
|
|
+# CONFIG_MACH_VR41XX is not set
|
|
+# CONFIG_PNX8550_JBS is not set
|
|
+# CONFIG_PNX8550_STB810 is not set
|
|
+# CONFIG_PMC_MSP is not set
|
|
+# CONFIG_PMC_YOSEMITE is not set
|
|
+# CONFIG_QEMU is not set
|
|
+# CONFIG_SGI_IP22 is not set
|
|
+# CONFIG_SGI_IP27 is not set
|
|
+# CONFIG_SGI_IP32 is not set
|
|
+# CONFIG_SIBYTE_CRHINE is not set
|
|
+# CONFIG_SIBYTE_CARMEL is not set
|
|
+# CONFIG_SIBYTE_CRHONE is not set
|
|
+# CONFIG_SIBYTE_RHONE is not set
|
|
+# CONFIG_SIBYTE_SWARM is not set
|
|
+# CONFIG_SIBYTE_LITTLESUR is not set
|
|
+# CONFIG_SIBYTE_SENTOSA is not set
|
|
+# CONFIG_SIBYTE_PTSWARM is not set
|
|
+# CONFIG_SIBYTE_BIGSUR is not set
|
|
+# CONFIG_SNI_RM is not set
|
|
+# CONFIG_TOSHIBA_JMR3927 is not set
|
|
+# CONFIG_TOSHIBA_RBTX4927 is not set
|
|
+# CONFIG_TOSHIBA_RBTX4938 is not set
|
|
+# CONFIG_WR_PPMC is not set
|
|
+CONFIG_SOC_JZ4730=y
|
|
+CONFIG_JZSOC=y
|
|
+CONFIG_JZRISC=y
|
|
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
|
+CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|
+CONFIG_GENERIC_HWEIGHT=y
|
|
+CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
+CONFIG_GENERIC_CLOCKEVENTS=y
|
|
+CONFIG_GENERIC_TIME=y
|
|
+CONFIG_GENERIC_CMOS_UPDATE=y
|
|
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
|
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
|
|
+CONFIG_DMA_NONCOHERENT=y
|
|
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
|
+# CONFIG_HOTPLUG_CPU is not set
|
|
+# CONFIG_NO_IOPORT is not set
|
|
+# CONFIG_CPU_BIG_ENDIAN is not set
|
|
+CONFIG_CPU_LITTLE_ENDIAN=y
|
|
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
|
+CONFIG_MIPS_L1_CACHE_SHIFT=5
|
|
+
|
|
+#
|
|
+# CPU selection
|
|
+#
|
|
+# CONFIG_CPU_LOONGSON2 is not set
|
|
+CONFIG_CPU_MIPS32_R1=y
|
|
+# CONFIG_CPU_MIPS32_R2 is not set
|
|
+# CONFIG_CPU_MIPS64_R1 is not set
|
|
+# CONFIG_CPU_MIPS64_R2 is not set
|
|
+# CONFIG_CPU_R3000 is not set
|
|
+# CONFIG_CPU_TX39XX is not set
|
|
+# CONFIG_CPU_VR41XX is not set
|
|
+# CONFIG_CPU_R4300 is not set
|
|
+# CONFIG_CPU_R4X00 is not set
|
|
+# CONFIG_CPU_TX49XX is not set
|
|
+# CONFIG_CPU_R5000 is not set
|
|
+# CONFIG_CPU_R5432 is not set
|
|
+# CONFIG_CPU_R6000 is not set
|
|
+# CONFIG_CPU_NEVADA is not set
|
|
+# CONFIG_CPU_R8000 is not set
|
|
+# CONFIG_CPU_R10000 is not set
|
|
+# CONFIG_CPU_RM7000 is not set
|
|
+# CONFIG_CPU_RM9000 is not set
|
|
+# CONFIG_CPU_SB1 is not set
|
|
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
|
+CONFIG_CPU_MIPS32=y
|
|
+CONFIG_CPU_MIPSR1=y
|
|
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
|
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
|
+
|
|
+#
|
|
+# Kernel type
|
|
+#
|
|
+CONFIG_32BIT=y
|
|
+# CONFIG_64BIT is not set
|
|
+CONFIG_PAGE_SIZE_4KB=y
|
|
+# CONFIG_PAGE_SIZE_8KB is not set
|
|
+# CONFIG_PAGE_SIZE_16KB is not set
|
|
+# CONFIG_PAGE_SIZE_64KB is not set
|
|
+CONFIG_CPU_HAS_PREFETCH=y
|
|
+CONFIG_MIPS_MT_DISABLED=y
|
|
+# CONFIG_MIPS_MT_SMP is not set
|
|
+# CONFIG_MIPS_MT_SMTC is not set
|
|
+CONFIG_CPU_HAS_LLSC=y
|
|
+CONFIG_CPU_HAS_SYNC=y
|
|
+CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_GENERIC_IRQ_PROBE=y
|
|
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
|
+CONFIG_ARCH_FLATMEM_ENABLE=y
|
|
+CONFIG_ARCH_POPULATES_NODE_MAP=y
|
|
+CONFIG_SELECT_MEMORY_MODEL=y
|
|
+CONFIG_FLATMEM_MANUAL=y
|
|
+# CONFIG_DISCONTIGMEM_MANUAL is not set
|
|
+# CONFIG_SPARSEMEM_MANUAL is not set
|
|
+CONFIG_FLATMEM=y
|
|
+CONFIG_FLAT_NODE_MEM_MAP=y
|
|
+# CONFIG_SPARSEMEM_STATIC is not set
|
|
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
|
+CONFIG_SPLIT_PTLOCK_CPUS=4
|
|
+# CONFIG_RESOURCES_64BIT is not set
|
|
+CONFIG_ZONE_DMA_FLAG=0
|
|
+CONFIG_VIRT_TO_BUS=y
|
|
+# CONFIG_TICK_ONESHOT is not set
|
|
+# CONFIG_NO_HZ is not set
|
|
+# CONFIG_HIGH_RES_TIMERS is not set
|
|
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
+# CONFIG_HZ_48 is not set
|
|
+CONFIG_HZ_100=y
|
|
+# CONFIG_HZ_128 is not set
|
|
+# CONFIG_HZ_250 is not set
|
|
+# CONFIG_HZ_256 is not set
|
|
+# CONFIG_HZ_1000 is not set
|
|
+# CONFIG_HZ_1024 is not set
|
|
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
|
+CONFIG_HZ=100
|
|
+# CONFIG_PREEMPT_NONE is not set
|
|
+# CONFIG_PREEMPT_VOLUNTARY is not set
|
|
+CONFIG_PREEMPT=y
|
|
+CONFIG_PREEMPT_BKL=y
|
|
+# CONFIG_KEXEC is not set
|
|
+CONFIG_SECCOMP=y
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
+
|
|
+#
|
|
+# General setup
|
|
+#
|
|
+CONFIG_EXPERIMENTAL=y
|
|
+CONFIG_BROKEN_ON_SMP=y
|
|
+CONFIG_LOCK_KERNEL=y
|
|
+CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
+CONFIG_LOCALVERSION=""
|
|
+CONFIG_LOCALVERSION_AUTO=y
|
|
+CONFIG_SWAP=y
|
|
+CONFIG_SYSVIPC=y
|
|
+CONFIG_SYSVIPC_SYSCTL=y
|
|
+# CONFIG_POSIX_MQUEUE is not set
|
|
+# CONFIG_BSD_PROCESS_ACCT is not set
|
|
+# CONFIG_TASKSTATS is not set
|
|
+# CONFIG_USER_NS is not set
|
|
+# CONFIG_PID_NS is not set
|
|
+# CONFIG_AUDIT is not set
|
|
+# CONFIG_IKCONFIG is not set
|
|
+CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_CGROUPS is not set
|
|
+CONFIG_FAIR_GROUP_SCHED=y
|
|
+CONFIG_FAIR_USER_SCHED=y
|
|
+# CONFIG_FAIR_CGROUP_SCHED is not set
|
|
+CONFIG_SYSFS_DEPRECATED=y
|
|
+CONFIG_RELAY=y
|
|
+# CONFIG_BLK_DEV_INITRD is not set
|
|
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
|
+CONFIG_SYSCTL=y
|
|
+CONFIG_EMBEDDED=y
|
|
+CONFIG_SYSCTL_SYSCALL=y
|
|
+CONFIG_KALLSYMS=y
|
|
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
|
+CONFIG_HOTPLUG=y
|
|
+CONFIG_PRINTK=y
|
|
+CONFIG_BUG=y
|
|
+CONFIG_ELF_CORE=y
|
|
+CONFIG_BASE_FULL=y
|
|
+CONFIG_FUTEX=y
|
|
+CONFIG_ANON_INODES=y
|
|
+CONFIG_EPOLL=y
|
|
+CONFIG_SIGNALFD=y
|
|
+CONFIG_EVENTFD=y
|
|
+CONFIG_SHMEM=y
|
|
+CONFIG_VM_EVENT_COUNTERS=y
|
|
+CONFIG_SLAB=y
|
|
+# CONFIG_SLUB is not set
|
|
+# CONFIG_SLOB is not set
|
|
+CONFIG_SLABINFO=y
|
|
+CONFIG_RT_MUTEXES=y
|
|
+# CONFIG_TINY_SHMEM is not set
|
|
+CONFIG_BASE_SMALL=0
|
|
+CONFIG_MODULES=y
|
|
+CONFIG_MODULE_UNLOAD=y
|
|
+# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
+CONFIG_MODVERSIONS=y
|
|
+CONFIG_MODULE_SRCVERSION_ALL=y
|
|
+CONFIG_KMOD=y
|
|
+CONFIG_BLOCK=y
|
|
+# CONFIG_LBD is not set
|
|
+# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
+# CONFIG_LSF is not set
|
|
+# CONFIG_BLK_DEV_BSG is not set
|
|
+
|
|
+#
|
|
+# IO Schedulers
|
|
+#
|
|
+CONFIG_IOSCHED_NOOP=y
|
|
+CONFIG_IOSCHED_AS=y
|
|
+CONFIG_IOSCHED_DEADLINE=y
|
|
+CONFIG_IOSCHED_CFQ=y
|
|
+CONFIG_DEFAULT_AS=y
|
|
+# CONFIG_DEFAULT_DEADLINE is not set
|
|
+# CONFIG_DEFAULT_CFQ is not set
|
|
+# CONFIG_DEFAULT_NOOP is not set
|
|
+CONFIG_DEFAULT_IOSCHED="anticipatory"
|
|
+
|
|
+#
|
|
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
|
|
+#
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
+CONFIG_MMU=y
|
|
+# CONFIG_PCCARD is not set
|
|
+
|
|
+#
|
|
+# Executable file formats
|
|
+#
|
|
+CONFIG_BINFMT_ELF=y
|
|
+# CONFIG_BINFMT_MISC is not set
|
|
+CONFIG_TRAD_SIGNALS=y
|
|
+
|
|
+#
|
|
+# CPU Frequency scaling
|
|
+#
|
|
+CONFIG_CPU_FREQ_JZ=y
|
|
+CONFIG_CPU_FREQ=y
|
|
+CONFIG_CPU_FREQ_TABLE=y
|
|
+# CONFIG_CPU_FREQ_DEBUG is not set
|
|
+CONFIG_CPU_FREQ_STAT=y
|
|
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
|
|
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
|
|
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
|
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
|
|
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
|
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
|
|
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
|
|
+
|
|
+#
|
|
+# Power management options
|
|
+#
|
|
+CONFIG_PM=y
|
|
+CONFIG_PM_LEGACY=y
|
|
+# CONFIG_PM_DEBUG is not set
|
|
+CONFIG_PM_SLEEP=y
|
|
+CONFIG_SUSPEND_UP_POSSIBLE=y
|
|
+CONFIG_SUSPEND=y
|
|
+
|
|
+#
|
|
+# Networking
|
|
+#
|
|
+CONFIG_NET=y
|
|
+
|
|
+#
|
|
+# Networking options
|
|
+#
|
|
+CONFIG_PACKET=y
|
|
+# CONFIG_PACKET_MMAP is not set
|
|
+CONFIG_UNIX=y
|
|
+# CONFIG_NET_KEY is not set
|
|
+CONFIG_INET=y
|
|
+# CONFIG_IP_MULTICAST is not set
|
|
+# CONFIG_IP_ADVANCED_ROUTER is not set
|
|
+CONFIG_IP_FIB_HASH=y
|
|
+CONFIG_IP_PNP=y
|
|
+CONFIG_IP_PNP_DHCP=y
|
|
+CONFIG_IP_PNP_BOOTP=y
|
|
+# CONFIG_IP_PNP_RARP is not set
|
|
+# CONFIG_NET_IPIP is not set
|
|
+# CONFIG_NET_IPGRE is not set
|
|
+# CONFIG_ARPD is not set
|
|
+# CONFIG_SYN_COOKIES is not set
|
|
+# CONFIG_INET_AH is not set
|
|
+# CONFIG_INET_ESP is not set
|
|
+# CONFIG_INET_IPCOMP is not set
|
|
+# CONFIG_INET_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
|
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_BEET is not set
|
|
+# CONFIG_INET_LRO is not set
|
|
+# CONFIG_INET_DIAG is not set
|
|
+# CONFIG_TCP_CONG_ADVANCED is not set
|
|
+CONFIG_TCP_CONG_CUBIC=y
|
|
+CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
+# CONFIG_TCP_MD5SIG is not set
|
|
+# CONFIG_IPV6 is not set
|
|
+# CONFIG_INET6_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET6_TUNNEL is not set
|
|
+# CONFIG_NETWORK_SECMARK is not set
|
|
+# CONFIG_NETFILTER is not set
|
|
+# CONFIG_IP_DCCP is not set
|
|
+# CONFIG_IP_SCTP is not set
|
|
+# CONFIG_TIPC is not set
|
|
+# CONFIG_ATM is not set
|
|
+# CONFIG_BRIDGE is not set
|
|
+# CONFIG_VLAN_8021Q is not set
|
|
+# CONFIG_DECNET is not set
|
|
+# CONFIG_LLC2 is not set
|
|
+# CONFIG_IPX is not set
|
|
+# CONFIG_ATALK is not set
|
|
+# CONFIG_X25 is not set
|
|
+# CONFIG_LAPB is not set
|
|
+# CONFIG_ECONET is not set
|
|
+# CONFIG_WAN_ROUTER is not set
|
|
+# CONFIG_NET_SCHED is not set
|
|
+
|
|
+#
|
|
+# Network testing
|
|
+#
|
|
+# CONFIG_NET_PKTGEN is not set
|
|
+# CONFIG_HAMRADIO is not set
|
|
+# CONFIG_IRDA is not set
|
|
+# CONFIG_BT is not set
|
|
+# CONFIG_AF_RXRPC is not set
|
|
+
|
|
+#
|
|
+# Wireless
|
|
+#
|
|
+# CONFIG_CFG80211 is not set
|
|
+# CONFIG_WIRELESS_EXT is not set
|
|
+# CONFIG_MAC80211 is not set
|
|
+# CONFIG_IEEE80211 is not set
|
|
+# CONFIG_RFKILL is not set
|
|
+# CONFIG_NET_9P is not set
|
|
+
|
|
+#
|
|
+# Device Drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# Generic Driver Options
|
|
+#
|
|
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
+CONFIG_STANDALONE=y
|
|
+CONFIG_PREVENT_FIRMWARE_BUILD=y
|
|
+# CONFIG_FW_LOADER is not set
|
|
+# CONFIG_SYS_HYPERVISOR is not set
|
|
+# CONFIG_CONNECTOR is not set
|
|
+CONFIG_MTD=y
|
|
+# CONFIG_MTD_DEBUG is not set
|
|
+CONFIG_MTD_CONCAT=y
|
|
+CONFIG_MTD_PARTITIONS=y
|
|
+# CONFIG_MTD_REDBOOT_PARTS is not set
|
|
+# CONFIG_MTD_CMDLINE_PARTS is not set
|
|
+
|
|
+#
|
|
+# User Modules And Translation Layers
|
|
+#
|
|
+CONFIG_MTD_CHAR=y
|
|
+CONFIG_MTD_BLKDEVS=y
|
|
+CONFIG_MTD_BLOCK=y
|
|
+# CONFIG_FTL is not set
|
|
+# CONFIG_NFTL is not set
|
|
+# CONFIG_INFTL is not set
|
|
+# CONFIG_RFD_FTL is not set
|
|
+# CONFIG_SSFDC is not set
|
|
+# CONFIG_MTD_OOPS is not set
|
|
+
|
|
+#
|
|
+# RAM/ROM/Flash chip drivers
|
|
+#
|
|
+# CONFIG_MTD_CFI is not set
|
|
+# CONFIG_MTD_JEDECPROBE is not set
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
|
+CONFIG_MTD_CFI_I1=y
|
|
+CONFIG_MTD_CFI_I2=y
|
|
+# CONFIG_MTD_CFI_I4 is not set
|
|
+# CONFIG_MTD_CFI_I8 is not set
|
|
+# CONFIG_MTD_RAM is not set
|
|
+# CONFIG_MTD_ROM is not set
|
|
+# CONFIG_MTD_ABSENT is not set
|
|
+
|
|
+#
|
|
+# Mapping drivers for chip access
|
|
+#
|
|
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
|
+# CONFIG_MTD_PLATRAM is not set
|
|
+
|
|
+#
|
|
+# Self-contained MTD device drivers
|
|
+#
|
|
+# CONFIG_MTD_SLRAM is not set
|
|
+# CONFIG_MTD_PHRAM is not set
|
|
+# CONFIG_MTD_MTDRAM is not set
|
|
+# CONFIG_MTD_BLOCK2MTD is not set
|
|
+
|
|
+#
|
|
+# Disk-On-Chip Device Drivers
|
|
+#
|
|
+# CONFIG_MTD_DOC2000 is not set
|
|
+# CONFIG_MTD_DOC2001 is not set
|
|
+# CONFIG_MTD_DOC2001PLUS is not set
|
|
+CONFIG_MTD_NAND=y
|
|
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
|
|
+# CONFIG_MTD_NAND_ECC_SMC is not set
|
|
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
|
|
+CONFIG_MTD_NAND_IDS=y
|
|
+# CONFIG_MTD_NAND_DISKONCHIP is not set
|
|
+# CONFIG_MTD_NAND_NANDSIM is not set
|
|
+# CONFIG_MTD_NAND_PLATFORM is not set
|
|
+# CONFIG_MTD_ALAUDA is not set
|
|
+CONFIG_MTD_NAND_JZ4730=y
|
|
+CONFIG_MTD_HW_HM_ECC=y
|
|
+# CONFIG_MTD_SW_HM_ECC is not set
|
|
+# CONFIG_MTD_HW_RS_ECC is not set
|
|
+# CONFIG_MTD_MTDBLOCK_WRITE_VERIFY_ENABLE is not set
|
|
+CONFIG_MTD_OOB_COPIES=3
|
|
+CONFIG_MTD_BADBLOCK_FLAG_PAGE=0
|
|
+# CONFIG_MTD_ONENAND is not set
|
|
+
|
|
+#
|
|
+# UBI - Unsorted block images
|
|
+#
|
|
+# CONFIG_MTD_UBI is not set
|
|
+# CONFIG_MTD_UBI_BLKDEVS is not set
|
|
+# CONFIG_PARPORT is not set
|
|
+# CONFIG_PNP is not set
|
|
+CONFIG_BLK_DEV=y
|
|
+# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
+CONFIG_BLK_DEV_LOOP=y
|
|
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
|
+# CONFIG_BLK_DEV_NBD is not set
|
|
+# CONFIG_BLK_DEV_UB is not set
|
|
+CONFIG_BLK_DEV_RAM=y
|
|
+CONFIG_BLK_DEV_RAM_COUNT=16
|
|
+CONFIG_BLK_DEV_RAM_SIZE=4096
|
|
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
+# CONFIG_CDROM_PKTCDVD is not set
|
|
+# CONFIG_ATA_OVER_ETH is not set
|
|
+CONFIG_MISC_DEVICES=y
|
|
+# CONFIG_EEPROM_93CX6 is not set
|
|
+# CONFIG_IDE is not set
|
|
+
|
|
+#
|
|
+# SCSI device support
|
|
+#
|
|
+# CONFIG_RAID_ATTRS is not set
|
|
+CONFIG_SCSI=y
|
|
+CONFIG_SCSI_DMA=y
|
|
+# CONFIG_SCSI_TGT is not set
|
|
+# CONFIG_SCSI_NETLINK is not set
|
|
+CONFIG_SCSI_PROC_FS=y
|
|
+
|
|
+#
|
|
+# SCSI support type (disk, tape, CD-ROM)
|
|
+#
|
|
+CONFIG_BLK_DEV_SD=y
|
|
+# CONFIG_CHR_DEV_ST is not set
|
|
+# CONFIG_CHR_DEV_OSST is not set
|
|
+# CONFIG_BLK_DEV_SR is not set
|
|
+# CONFIG_CHR_DEV_SG is not set
|
|
+# CONFIG_CHR_DEV_SCH is not set
|
|
+
|
|
+#
|
|
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
|
+#
|
|
+# CONFIG_SCSI_MULTI_LUN is not set
|
|
+# CONFIG_SCSI_CONSTANTS is not set
|
|
+# CONFIG_SCSI_LOGGING is not set
|
|
+# CONFIG_SCSI_SCAN_ASYNC is not set
|
|
+CONFIG_SCSI_WAIT_SCAN=m
|
|
+
|
|
+#
|
|
+# SCSI Transports
|
|
+#
|
|
+# CONFIG_SCSI_SPI_ATTRS is not set
|
|
+# CONFIG_SCSI_FC_ATTRS is not set
|
|
+# CONFIG_SCSI_ISCSI_ATTRS is not set
|
|
+# CONFIG_SCSI_SAS_LIBSAS is not set
|
|
+# CONFIG_SCSI_SRP_ATTRS is not set
|
|
+CONFIG_SCSI_LOWLEVEL=y
|
|
+# CONFIG_ISCSI_TCP is not set
|
|
+# CONFIG_SCSI_DEBUG is not set
|
|
+# CONFIG_ATA is not set
|
|
+# CONFIG_MD is not set
|
|
+CONFIG_NETDEVICES=y
|
|
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
|
+# CONFIG_DUMMY is not set
|
|
+# CONFIG_BONDING is not set
|
|
+# CONFIG_MACVLAN is not set
|
|
+# CONFIG_EQUALIZER is not set
|
|
+# CONFIG_TUN is not set
|
|
+# CONFIG_VETH is not set
|
|
+CONFIG_PHYLIB=y
|
|
+
|
|
+#
|
|
+# MII PHY device drivers
|
|
+#
|
|
+# CONFIG_MARVELL_PHY is not set
|
|
+# CONFIG_DAVICOM_PHY is not set
|
|
+# CONFIG_QSEMI_PHY is not set
|
|
+# CONFIG_LXT_PHY is not set
|
|
+# CONFIG_CICADA_PHY is not set
|
|
+# CONFIG_VITESSE_PHY is not set
|
|
+# CONFIG_SMSC_PHY is not set
|
|
+# CONFIG_BROADCOM_PHY is not set
|
|
+# CONFIG_ICPLUS_PHY is not set
|
|
+# CONFIG_FIXED_PHY is not set
|
|
+# CONFIG_MDIO_BITBANG is not set
|
|
+CONFIG_NET_ETHERNET=y
|
|
+CONFIG_MII=y
|
|
+CONFIG_JZ_ETH=y
|
|
+# CONFIG_AX88796 is not set
|
|
+# CONFIG_DM9000 is not set
|
|
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_TAH is not set
|
|
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
|
+# CONFIG_B44 is not set
|
|
+# CONFIG_NETDEV_1000 is not set
|
|
+# CONFIG_NETDEV_10000 is not set
|
|
+
|
|
+#
|
|
+# Wireless LAN
|
|
+#
|
|
+# CONFIG_WLAN_PRE80211 is not set
|
|
+# CONFIG_WLAN_80211 is not set
|
|
+
|
|
+#
|
|
+# USB Network Adapters
|
|
+#
|
|
+# CONFIG_USB_CATC is not set
|
|
+# CONFIG_USB_KAWETH is not set
|
|
+# CONFIG_USB_PEGASUS is not set
|
|
+# CONFIG_USB_RTL8150 is not set
|
|
+# CONFIG_USB_USBNET is not set
|
|
+# CONFIG_WAN is not set
|
|
+# CONFIG_PPP is not set
|
|
+# CONFIG_SLIP is not set
|
|
+# CONFIG_SHAPER is not set
|
|
+# CONFIG_NETCONSOLE is not set
|
|
+# CONFIG_NETPOLL is not set
|
|
+# CONFIG_NET_POLL_CONTROLLER is not set
|
|
+# CONFIG_ISDN is not set
|
|
+# CONFIG_PHONE is not set
|
|
+
|
|
+#
|
|
+# Input device support
|
|
+#
|
|
+CONFIG_INPUT=y
|
|
+# CONFIG_INPUT_FF_MEMLESS is not set
|
|
+# CONFIG_INPUT_POLLDEV is not set
|
|
+
|
|
+#
|
|
+# Userland interfaces
|
|
+#
|
|
+CONFIG_INPUT_MOUSEDEV=y
|
|
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
|
+# CONFIG_INPUT_JOYDEV is not set
|
|
+CONFIG_INPUT_EVDEV=y
|
|
+# CONFIG_INPUT_EVBUG is not set
|
|
+
|
|
+#
|
|
+# Input Device Drivers
|
|
+#
|
|
+# CONFIG_INPUT_KEYBOARD is not set
|
|
+# CONFIG_INPUT_MOUSE is not set
|
|
+# CONFIG_INPUT_JOYSTICK is not set
|
|
+# CONFIG_INPUT_TABLET is not set
|
|
+# CONFIG_INPUT_TOUCHSCREEN is not set
|
|
+# CONFIG_INPUT_MISC is not set
|
|
+
|
|
+#
|
|
+# Hardware I/O ports
|
|
+#
|
|
+CONFIG_SERIO=y
|
|
+# CONFIG_SERIO_I8042 is not set
|
|
+CONFIG_SERIO_SERPORT=y
|
|
+# CONFIG_SERIO_LIBPS2 is not set
|
|
+# CONFIG_SERIO_RAW is not set
|
|
+# CONFIG_GAMEPORT is not set
|
|
+
|
|
+#
|
|
+# Character devices
|
|
+#
|
|
+CONFIG_VT=y
|
|
+CONFIG_VT_CONSOLE=y
|
|
+CONFIG_HW_CONSOLE=y
|
|
+CONFIG_VT_HW_CONSOLE_BINDING=y
|
|
+# CONFIG_SERIAL_NONSTANDARD is not set
|
|
+
|
|
+#
|
|
+# Serial drivers
|
|
+#
|
|
+CONFIG_SERIAL_8250=y
|
|
+CONFIG_SERIAL_8250_CONSOLE=y
|
|
+CONFIG_SERIAL_8250_NR_UARTS=4
|
|
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
|
|
+# CONFIG_SERIAL_8250_EXTENDED is not set
|
|
+
|
|
+#
|
|
+# Non-8250 serial port support
|
|
+#
|
|
+CONFIG_SERIAL_CORE=y
|
|
+CONFIG_SERIAL_CORE_CONSOLE=y
|
|
+CONFIG_UNIX98_PTYS=y
|
|
+CONFIG_LEGACY_PTYS=y
|
|
+CONFIG_LEGACY_PTY_COUNT=256
|
|
+# CONFIG_IPMI_HANDLER is not set
|
|
+# CONFIG_HW_RANDOM is not set
|
|
+# CONFIG_RTC is not set
|
|
+CONFIG_RTC_PCF8563=y
|
|
+# CONFIG_RTC_JZ is not set
|
|
+# CONFIG_R3964 is not set
|
|
+# CONFIG_RAW_DRIVER is not set
|
|
+# CONFIG_TCG_TPM is not set
|
|
+
|
|
+#
|
|
+# JZSOC char device support
|
|
+#
|
|
+CONFIG_JZCHAR=y
|
|
+# CONFIG_JZ_CIM is not set
|
|
+# CONFIG_JZ_TPANEL_ATA2508 is not set
|
|
+CONFIG_JZ_TPANEL=y
|
|
+# CONFIG_JZ_SADC is not set
|
|
+CONFIG_JZ_TPANEL_AK4182=y
|
|
+# CONFIG_JZ_TPANEL_UCB1400 is not set
|
|
+# CONFIG_JZ_TPANEL_WM9712 is not set
|
|
+# CONFIG_JZ_UDC_HOTPLUG is not set
|
|
+CONFIG_JZ_POWEROFF=y
|
|
+# CONFIG_JZ_OW is not set
|
|
+# CONFIG_I2C is not set
|
|
+
|
|
+#
|
|
+# SPI support
|
|
+#
|
|
+# CONFIG_SPI is not set
|
|
+# CONFIG_SPI_MASTER is not set
|
|
+# CONFIG_W1 is not set
|
|
+# CONFIG_POWER_SUPPLY is not set
|
|
+# CONFIG_HWMON is not set
|
|
+CONFIG_WATCHDOG=y
|
|
+# CONFIG_WATCHDOG_NOWAYOUT is not set
|
|
+
|
|
+#
|
|
+# Watchdog Device Drivers
|
|
+#
|
|
+CONFIG_JZ_WDT=y
|
|
+# CONFIG_SOFT_WATCHDOG is not set
|
|
+
|
|
+#
|
|
+# USB-based Watchdog Cards
|
|
+#
|
|
+# CONFIG_USBPCWATCHDOG is not set
|
|
+
|
|
+#
|
|
+# Sonics Silicon Backplane
|
|
+#
|
|
+CONFIG_SSB_POSSIBLE=y
|
|
+# CONFIG_SSB is not set
|
|
+
|
|
+#
|
|
+# Multifunction device drivers
|
|
+#
|
|
+# CONFIG_MFD_SM501 is not set
|
|
+
|
|
+#
|
|
+# Multimedia devices
|
|
+#
|
|
+CONFIG_VIDEO_DEV=y
|
|
+# CONFIG_VIDEO_V4L1 is not set
|
|
+# CONFIG_VIDEO_V4L1_COMPAT is not set
|
|
+CONFIG_VIDEO_V4L2=y
|
|
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
|
|
+# CONFIG_VIDEO_ADV_DEBUG is not set
|
|
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
|
|
+
|
|
+#
|
|
+# Encoders/decoders and other helper chips
|
|
+#
|
|
+
|
|
+#
|
|
+# Audio decoders
|
|
+#
|
|
+
|
|
+#
|
|
+# Video decoders
|
|
+#
|
|
+
|
|
+#
|
|
+# Video and audio decoders
|
|
+#
|
|
+
|
|
+#
|
|
+# MPEG video encoders
|
|
+#
|
|
+# CONFIG_VIDEO_CX2341X is not set
|
|
+
|
|
+#
|
|
+# Video encoders
|
|
+#
|
|
+
|
|
+#
|
|
+# Video improvement chips
|
|
+#
|
|
+# CONFIG_VIDEO_VIVI is not set
|
|
+CONFIG_VIDEO_JZ_CIM=m
|
|
+CONFIG_VIDEO_JZ_SENSOR=m
|
|
+# CONFIG_V4L_USB_DRIVERS is not set
|
|
+CONFIG_RADIO_ADAPTERS=y
|
|
+# CONFIG_USB_DSBR is not set
|
|
+# CONFIG_DVB_CORE is not set
|
|
+# CONFIG_DAB is not set
|
|
+
|
|
+#
|
|
+# Graphics support
|
|
+#
|
|
+# CONFIG_VGASTATE is not set
|
|
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
|
+CONFIG_FB=y
|
|
+# CONFIG_FIRMWARE_EDID is not set
|
|
+# CONFIG_FB_DDC is not set
|
|
+CONFIG_FB_CFB_FILLRECT=y
|
|
+CONFIG_FB_CFB_COPYAREA=y
|
|
+CONFIG_FB_CFB_IMAGEBLIT=y
|
|
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
|
|
+# CONFIG_FB_SYS_FILLRECT is not set
|
|
+# CONFIG_FB_SYS_COPYAREA is not set
|
|
+# CONFIG_FB_SYS_IMAGEBLIT is not set
|
|
+# CONFIG_FB_SYS_FOPS is not set
|
|
+CONFIG_FB_DEFERRED_IO=y
|
|
+# CONFIG_FB_SVGALIB is not set
|
|
+# CONFIG_FB_MACMODES is not set
|
|
+# CONFIG_FB_BACKLIGHT is not set
|
|
+# CONFIG_FB_MODE_HELPERS is not set
|
|
+# CONFIG_FB_TILEBLITTING is not set
|
|
+
|
|
+#
|
|
+# Frame buffer hardware drivers
|
|
+#
|
|
+CONFIG_FB_JZSOC=y
|
|
+CONFIG_FB_JZLCD_4730_4740=y
|
|
+CONFIG_JZLCD_FRAMEBUFFER_MAX=1
|
|
+# CONFIG_JZLCD_FRAMEBUFFER_ROTATE_SUPPORT is not set
|
|
+# CONFIG_JZLCD_SHARP_LQ035Q7 is not set
|
|
+# CONFIG_JZLCD_SAMSUNG_LTS350Q1 is not set
|
|
+# CONFIG_JZLCD_SAMSUNG_LTV350QVF04 is not set
|
|
+CONFIG_JZLCD_SAMSUNG_LTP400WQF01=y
|
|
+# CONFIG_JZLCD_SAMSUNG_LTP400WQF02 is not set
|
|
+# CONFIG_JZLCD_AUO_A030FL01_V1 is not set
|
|
+# CONFIG_JZLCD_TRULY_TFTG320240DTSW is not set
|
|
+# CONFIG_JZLCD_TRULY_TFTG320240DTSW_SERIAL is not set
|
|
+# CONFIG_JZLCD_TRULY_TFTG240320UTSW_63W_E is not set
|
|
+# CONFIG_JZLCD_FOXCONN_PT035TN01 is not set
|
|
+# CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL is not set
|
|
+# CONFIG_JZLCD_TOSHIBA_LTM084P363 is not set
|
|
+# CONFIG_JZLCD_HYNIX_HT10X21 is not set
|
|
+# CONFIG_JZLCD_INNOLUX_AT080TN42 is not set
|
|
+# CONFIG_JZLCD_CSTN_800x600 is not set
|
|
+# CONFIG_JZLCD_CSTN_320x240 is not set
|
|
+# CONFIG_JZLCD_MSTN_480x320 is not set
|
|
+# CONFIG_JZLCD_MSTN_320x240 is not set
|
|
+# CONFIG_JZLCD_MSTN_240x128 is not set
|
|
+# CONFIG_FB_S1D13XXX is not set
|
|
+# CONFIG_FB_VIRTUAL is not set
|
|
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Display device support
|
|
+#
|
|
+# CONFIG_DISPLAY_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Console display driver support
|
|
+#
|
|
+# CONFIG_VGA_CONSOLE is not set
|
|
+CONFIG_DUMMY_CONSOLE=y
|
|
+CONFIG_FRAMEBUFFER_CONSOLE=y
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE_CURSOR_FLASH is not set
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
|
|
+CONFIG_FONTS=y
|
|
+CONFIG_FONT_8x8=y
|
|
+CONFIG_FONT_8x16=y
|
|
+# CONFIG_FONT_6x11 is not set
|
|
+# CONFIG_FONT_7x14 is not set
|
|
+# CONFIG_FONT_PEARL_8x8 is not set
|
|
+# CONFIG_FONT_ACORN_8x8 is not set
|
|
+# CONFIG_FONT_MINI_4x6 is not set
|
|
+# CONFIG_FONT_SUN8x16 is not set
|
|
+# CONFIG_FONT_SUN12x22 is not set
|
|
+# CONFIG_FONT_10x18 is not set
|
|
+CONFIG_LOGO=y
|
|
+CONFIG_LOGO_LINUX_MONO=y
|
|
+CONFIG_LOGO_LINUX_VGA16=y
|
|
+CONFIG_LOGO_LINUX_CLUT224=y
|
|
+
|
|
+#
|
|
+# Sound
|
|
+#
|
|
+# CONFIG_SOUND is not set
|
|
+CONFIG_HID_SUPPORT=y
|
|
+CONFIG_HID=y
|
|
+# CONFIG_HID_DEBUG is not set
|
|
+# CONFIG_HIDRAW is not set
|
|
+
|
|
+#
|
|
+# USB Input Devices
|
|
+#
|
|
+CONFIG_USB_HID=y
|
|
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
|
|
+# CONFIG_HID_FF is not set
|
|
+CONFIG_USB_HIDDEV=y
|
|
+CONFIG_USB_SUPPORT=y
|
|
+CONFIG_USB_ARCH_HAS_HCD=y
|
|
+CONFIG_USB_ARCH_HAS_OHCI=y
|
|
+# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
+CONFIG_USB=y
|
|
+# CONFIG_USB_DEBUG is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous USB options
|
|
+#
|
|
+CONFIG_USB_DEVICEFS=y
|
|
+# CONFIG_USB_DEVICE_CLASS is not set
|
|
+# CONFIG_USB_DYNAMIC_MINORS is not set
|
|
+# CONFIG_USB_SUSPEND is not set
|
|
+# CONFIG_USB_PERSIST is not set
|
|
+# CONFIG_USB_OTG is not set
|
|
+
|
|
+#
|
|
+# USB Host Controller Drivers
|
|
+#
|
|
+# CONFIG_USB_ISP116X_HCD is not set
|
|
+CONFIG_USB_OHCI_HCD=y
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
|
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
|
+# CONFIG_USB_SL811_HCD is not set
|
|
+# CONFIG_USB_R8A66597_HCD is not set
|
|
+
|
|
+#
|
|
+# USB Device Class drivers
|
|
+#
|
|
+# CONFIG_USB_ACM is not set
|
|
+# CONFIG_USB_PRINTER is not set
|
|
+
|
|
+#
|
|
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
+#
|
|
+
|
|
+#
|
|
+# may also be needed; see USB_STORAGE Help for more information
|
|
+#
|
|
+CONFIG_USB_STORAGE=y
|
|
+# CONFIG_USB_STORAGE_DEBUG is not set
|
|
+# CONFIG_USB_STORAGE_DATAFAB is not set
|
|
+# CONFIG_USB_STORAGE_FREECOM is not set
|
|
+# CONFIG_USB_STORAGE_ISD200 is not set
|
|
+# CONFIG_USB_STORAGE_DPCM is not set
|
|
+# CONFIG_USB_STORAGE_USBAT is not set
|
|
+# CONFIG_USB_STORAGE_SDDR09 is not set
|
|
+# CONFIG_USB_STORAGE_SDDR55 is not set
|
|
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
|
|
+# CONFIG_USB_STORAGE_ALAUDA is not set
|
|
+# CONFIG_USB_STORAGE_KARMA is not set
|
|
+# CONFIG_USB_LIBUSUAL is not set
|
|
+
|
|
+#
|
|
+# USB Imaging devices
|
|
+#
|
|
+# CONFIG_USB_MDC800 is not set
|
|
+# CONFIG_USB_MICROTEK is not set
|
|
+# CONFIG_USB_MON is not set
|
|
+
|
|
+#
|
|
+# USB port drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Serial Converter support
|
|
+#
|
|
+# CONFIG_USB_SERIAL is not set
|
|
+
|
|
+#
|
|
+# USB Miscellaneous drivers
|
|
+#
|
|
+# CONFIG_USB_EMI62 is not set
|
|
+# CONFIG_USB_EMI26 is not set
|
|
+# CONFIG_USB_ADUTUX is not set
|
|
+# CONFIG_USB_AUERSWALD is not set
|
|
+# CONFIG_USB_RIO500 is not set
|
|
+# CONFIG_USB_LEGOTOWER is not set
|
|
+# CONFIG_USB_LCD is not set
|
|
+# CONFIG_USB_BERRY_CHARGE is not set
|
|
+# CONFIG_USB_LED is not set
|
|
+# CONFIG_USB_CYPRESS_CY7C63 is not set
|
|
+# CONFIG_USB_CYTHERM is not set
|
|
+# CONFIG_USB_PHIDGET is not set
|
|
+# CONFIG_USB_IDMOUSE is not set
|
|
+# CONFIG_USB_FTDI_ELAN is not set
|
|
+# CONFIG_USB_APPLEDISPLAY is not set
|
|
+# CONFIG_USB_LD is not set
|
|
+# CONFIG_USB_TRANCEVIBRATOR is not set
|
|
+# CONFIG_USB_IOWARRIOR is not set
|
|
+# CONFIG_USB_TEST is not set
|
|
+
|
|
+#
|
|
+# USB DSL modem support
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Gadget Support
|
|
+#
|
|
+CONFIG_USB_GADGET=m
|
|
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
|
+CONFIG_USB_GADGET_SELECTED=y
|
|
+# CONFIG_USB_GADGET_JZ4740 is not set
|
|
+CONFIG_USB_GADGET_JZ4730=y
|
|
+CONFIG_USB_JZ4730=m
|
|
+# CONFIG_USB_GADGET_AMD5536UDC is not set
|
|
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
|
|
+# CONFIG_USB_GADGET_FSL_USB2 is not set
|
|
+# CONFIG_USB_GADGET_NET2280 is not set
|
|
+# CONFIG_USB_GADGET_PXA2XX is not set
|
|
+# CONFIG_USB_GADGET_M66592 is not set
|
|
+# CONFIG_USB_GADGET_GOKU is not set
|
|
+# CONFIG_USB_GADGET_LH7A40X is not set
|
|
+# CONFIG_USB_GADGET_OMAP is not set
|
|
+# CONFIG_USB_GADGET_S3C2410 is not set
|
|
+# CONFIG_USB_GADGET_AT91 is not set
|
|
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
|
|
+# CONFIG_USB_GADGET_DUALSPEED is not set
|
|
+# CONFIG_USB_ZERO is not set
|
|
+CONFIG_USB_ETH=m
|
|
+CONFIG_USB_ETH_RNDIS=y
|
|
+# CONFIG_USB_GADGETFS is not set
|
|
+CONFIG_USB_FILE_STORAGE=m
|
|
+# CONFIG_USB_FILE_STORAGE_TEST is not set
|
|
+CONFIG_USB_G_SERIAL=m
|
|
+# CONFIG_USB_MIDI_GADGET is not set
|
|
+CONFIG_MMC=y
|
|
+# CONFIG_MMC_DEBUG is not set
|
|
+# CONFIG_MMC_UNSAFE_RESUME is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Card Drivers
|
|
+#
|
|
+CONFIG_MMC_BLOCK=y
|
|
+CONFIG_MMC_BLOCK_BOUNCE=y
|
|
+# CONFIG_SDIO_UART is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Host Controller Drivers
|
|
+#
|
|
+CONFIG_MMC_JZ=y
|
|
+CONFIG_JZ_MMC_BUS_4=y
|
|
+# CONFIG_JZ_MMC_BUS_1 is not set
|
|
+# CONFIG_NEW_LEDS is not set
|
|
+CONFIG_RTC_LIB=y
|
|
+# CONFIG_RTC_CLASS is not set
|
|
+
|
|
+#
|
|
+# Userspace I/O
|
|
+#
|
|
+# CONFIG_UIO is not set
|
|
+
|
|
+#
|
|
+# File systems
|
|
+#
|
|
+CONFIG_EXT2_FS=y
|
|
+CONFIG_EXT2_FS_XATTR=y
|
|
+# CONFIG_EXT2_FS_POSIX_ACL is not set
|
|
+# CONFIG_EXT2_FS_SECURITY is not set
|
|
+# CONFIG_EXT2_FS_XIP is not set
|
|
+CONFIG_EXT3_FS=y
|
|
+CONFIG_EXT3_FS_XATTR=y
|
|
+# CONFIG_EXT3_FS_POSIX_ACL is not set
|
|
+# CONFIG_EXT3_FS_SECURITY is not set
|
|
+# CONFIG_EXT4DEV_FS is not set
|
|
+CONFIG_JBD=y
|
|
+CONFIG_FS_MBCACHE=y
|
|
+# CONFIG_REISERFS_FS is not set
|
|
+# CONFIG_JFS_FS is not set
|
|
+# CONFIG_FS_POSIX_ACL is not set
|
|
+# CONFIG_XFS_FS is not set
|
|
+# CONFIG_GFS2_FS is not set
|
|
+# CONFIG_OCFS2_FS is not set
|
|
+CONFIG_MINIX_FS=y
|
|
+# CONFIG_ROMFS_FS is not set
|
|
+CONFIG_INOTIFY=y
|
|
+CONFIG_INOTIFY_USER=y
|
|
+# CONFIG_QUOTA is not set
|
|
+CONFIG_DNOTIFY=y
|
|
+# CONFIG_AUTOFS_FS is not set
|
|
+# CONFIG_AUTOFS4_FS is not set
|
|
+# CONFIG_FUSE_FS is not set
|
|
+
|
|
+#
|
|
+# CD-ROM/DVD Filesystems
|
|
+#
|
|
+# CONFIG_ISO9660_FS is not set
|
|
+# CONFIG_UDF_FS is not set
|
|
+
|
|
+#
|
|
+# DOS/FAT/NT Filesystems
|
|
+#
|
|
+CONFIG_FAT_FS=y
|
|
+CONFIG_MSDOS_FS=y
|
|
+CONFIG_VFAT_FS=y
|
|
+CONFIG_FAT_DEFAULT_CODEPAGE=437
|
|
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
|
+# CONFIG_NTFS_FS is not set
|
|
+
|
|
+#
|
|
+# Pseudo filesystems
|
|
+#
|
|
+CONFIG_PROC_FS=y
|
|
+CONFIG_PROC_KCORE=y
|
|
+CONFIG_PROC_SYSCTL=y
|
|
+CONFIG_SYSFS=y
|
|
+CONFIG_TMPFS=y
|
|
+# CONFIG_TMPFS_POSIX_ACL is not set
|
|
+# CONFIG_HUGETLB_PAGE is not set
|
|
+# CONFIG_CONFIGFS_FS is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous filesystems
|
|
+#
|
|
+# CONFIG_ADFS_FS is not set
|
|
+# CONFIG_AFFS_FS is not set
|
|
+# CONFIG_HFS_FS is not set
|
|
+# CONFIG_HFSPLUS_FS is not set
|
|
+# CONFIG_BEFS_FS is not set
|
|
+# CONFIG_BFS_FS is not set
|
|
+# CONFIG_EFS_FS is not set
|
|
+# CONFIG_JFFS2_FS is not set
|
|
+# CONFIG_CRAMFS is not set
|
|
+# CONFIG_VXFS_FS is not set
|
|
+# CONFIG_HPFS_FS is not set
|
|
+# CONFIG_QNX4FS_FS is not set
|
|
+# CONFIG_SYSV_FS is not set
|
|
+# CONFIG_UFS_FS is not set
|
|
+CONFIG_NETWORK_FILESYSTEMS=y
|
|
+CONFIG_NFS_FS=y
|
|
+CONFIG_NFS_V3=y
|
|
+# CONFIG_NFS_V3_ACL is not set
|
|
+# CONFIG_NFS_V4 is not set
|
|
+# CONFIG_NFS_DIRECTIO is not set
|
|
+# CONFIG_NFSD is not set
|
|
+CONFIG_ROOT_NFS=y
|
|
+CONFIG_LOCKD=y
|
|
+CONFIG_LOCKD_V4=y
|
|
+CONFIG_NFS_COMMON=y
|
|
+CONFIG_SUNRPC=y
|
|
+# CONFIG_SUNRPC_BIND34 is not set
|
|
+# CONFIG_RPCSEC_GSS_KRB5 is not set
|
|
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
|
+# CONFIG_SMB_FS is not set
|
|
+# CONFIG_CIFS is not set
|
|
+# CONFIG_NCP_FS is not set
|
|
+# CONFIG_CODA_FS is not set
|
|
+# CONFIG_AFS_FS is not set
|
|
+
|
|
+#
|
|
+# Partition Types
|
|
+#
|
|
+CONFIG_PARTITION_ADVANCED=y
|
|
+# CONFIG_ACORN_PARTITION is not set
|
|
+# CONFIG_OSF_PARTITION is not set
|
|
+# CONFIG_AMIGA_PARTITION is not set
|
|
+# CONFIG_ATARI_PARTITION is not set
|
|
+# CONFIG_MAC_PARTITION is not set
|
|
+CONFIG_MSDOS_PARTITION=y
|
|
+CONFIG_BSD_DISKLABEL=y
|
|
+# CONFIG_MINIX_SUBPARTITION is not set
|
|
+# CONFIG_SOLARIS_X86_PARTITION is not set
|
|
+# CONFIG_UNIXWARE_DISKLABEL is not set
|
|
+# CONFIG_LDM_PARTITION is not set
|
|
+# CONFIG_SGI_PARTITION is not set
|
|
+# CONFIG_ULTRIX_PARTITION is not set
|
|
+# CONFIG_SUN_PARTITION is not set
|
|
+# CONFIG_KARMA_PARTITION is not set
|
|
+# CONFIG_EFI_PARTITION is not set
|
|
+# CONFIG_SYSV68_PARTITION is not set
|
|
+CONFIG_NLS=y
|
|
+CONFIG_NLS_DEFAULT="iso8859-1"
|
|
+CONFIG_NLS_CODEPAGE_437=y
|
|
+# CONFIG_NLS_CODEPAGE_737 is not set
|
|
+# CONFIG_NLS_CODEPAGE_775 is not set
|
|
+# CONFIG_NLS_CODEPAGE_850 is not set
|
|
+# CONFIG_NLS_CODEPAGE_852 is not set
|
|
+# CONFIG_NLS_CODEPAGE_855 is not set
|
|
+# CONFIG_NLS_CODEPAGE_857 is not set
|
|
+# CONFIG_NLS_CODEPAGE_860 is not set
|
|
+# CONFIG_NLS_CODEPAGE_861 is not set
|
|
+# CONFIG_NLS_CODEPAGE_862 is not set
|
|
+# CONFIG_NLS_CODEPAGE_863 is not set
|
|
+# CONFIG_NLS_CODEPAGE_864 is not set
|
|
+# CONFIG_NLS_CODEPAGE_865 is not set
|
|
+# CONFIG_NLS_CODEPAGE_866 is not set
|
|
+# CONFIG_NLS_CODEPAGE_869 is not set
|
|
+CONFIG_NLS_CODEPAGE_936=y
|
|
+# CONFIG_NLS_CODEPAGE_950 is not set
|
|
+# CONFIG_NLS_CODEPAGE_932 is not set
|
|
+# CONFIG_NLS_CODEPAGE_949 is not set
|
|
+# CONFIG_NLS_CODEPAGE_874 is not set
|
|
+# CONFIG_NLS_ISO8859_8 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1250 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1251 is not set
|
|
+CONFIG_NLS_ASCII=y
|
|
+CONFIG_NLS_ISO8859_1=y
|
|
+# CONFIG_NLS_ISO8859_2 is not set
|
|
+# CONFIG_NLS_ISO8859_3 is not set
|
|
+# CONFIG_NLS_ISO8859_4 is not set
|
|
+# CONFIG_NLS_ISO8859_5 is not set
|
|
+# CONFIG_NLS_ISO8859_6 is not set
|
|
+# CONFIG_NLS_ISO8859_7 is not set
|
|
+# CONFIG_NLS_ISO8859_9 is not set
|
|
+# CONFIG_NLS_ISO8859_13 is not set
|
|
+# CONFIG_NLS_ISO8859_14 is not set
|
|
+# CONFIG_NLS_ISO8859_15 is not set
|
|
+# CONFIG_NLS_KOI8_R is not set
|
|
+# CONFIG_NLS_KOI8_U is not set
|
|
+# CONFIG_NLS_UTF8 is not set
|
|
+# CONFIG_DLM is not set
|
|
+
|
|
+#
|
|
+# Yaffs2 Filesystems
|
|
+#
|
|
+CONFIG_YAFFS_FS=y
|
|
+CONFIG_YAFFS_YAFFS1=y
|
|
+# CONFIG_YAFFS_DOES_ECC is not set
|
|
+CONFIG_YAFFS_YAFFS2=y
|
|
+CONFIG_YAFFS_AUTO_YAFFS2=y
|
|
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
|
|
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
|
|
+CONFIG_YAFFS_DISABLE_CHUNK_ERASED_CHECK=y
|
|
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
|
|
+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
|
|
+CONFIG_INSTRUMENTATION=y
|
|
+# CONFIG_PROFILING is not set
|
|
+# CONFIG_MARKERS is not set
|
|
+
|
|
+#
|
|
+# Kernel hacking
|
|
+#
|
|
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
+# CONFIG_PRINTK_TIME is not set
|
|
+CONFIG_ENABLE_WARN_DEPRECATED=y
|
|
+CONFIG_ENABLE_MUST_CHECK=y
|
|
+CONFIG_MAGIC_SYSRQ=y
|
|
+# CONFIG_UNUSED_SYMBOLS is not set
|
|
+# CONFIG_DEBUG_FS is not set
|
|
+# CONFIG_HEADERS_CHECK is not set
|
|
+# CONFIG_DEBUG_KERNEL is not set
|
|
+# CONFIG_SAMPLES is not set
|
|
+CONFIG_CMDLINE=""
|
|
+
|
|
+#
|
|
+# Security options
|
|
+#
|
|
+# CONFIG_KEYS is not set
|
|
+# CONFIG_SECURITY is not set
|
|
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
|
+# CONFIG_CRYPTO is not set
|
|
+
|
|
+#
|
|
+# Library routines
|
|
+#
|
|
+CONFIG_BITREVERSE=y
|
|
+# CONFIG_CRC_CCITT is not set
|
|
+# CONFIG_CRC16 is not set
|
|
+# CONFIG_CRC_ITU_T is not set
|
|
+CONFIG_CRC32=y
|
|
+# CONFIG_CRC7 is not set
|
|
+# CONFIG_LIBCRC32C is not set
|
|
+CONFIG_PLIST=y
|
|
+CONFIG_HAS_IOMEM=y
|
|
+CONFIG_HAS_IOPORT=y
|
|
+CONFIG_HAS_DMA=y
|
|
--- linux-2.6.24.7.old/arch/mips/configs/slt50_defconfig 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/configs/slt50_defconfig 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,1036 @@
|
|
+#
|
|
+# Automatically generated make config: don't edit
|
|
+# Linux kernel version: 2.6.24.3
|
|
+# Tue Nov 25 09:38:56 2008
|
|
+#
|
|
+CONFIG_MIPS=y
|
|
+
|
|
+#
|
|
+# Machine selection
|
|
+#
|
|
+# CONFIG_JZ4730_PMP is not set
|
|
+# CONFIG_JZ4740_PAVO is not set
|
|
+# CONFIG_JZ4740_LEO is not set
|
|
+# CONFIG_JZ4740_LYRA is not set
|
|
+# CONFIG_JZ4725_DIPPER is not set
|
|
+# CONFIG_JZ4720_VIRGO is not set
|
|
+# CONFIG_JZ4750_FUWA is not set
|
|
+# CONFIG_JZ4750_APUS is not set
|
|
+CONFIG_JZ4750_SLT50=y
|
|
+# CONFIG_MACH_ALCHEMY is not set
|
|
+# CONFIG_BASLER_EXCITE is not set
|
|
+# CONFIG_BCM47XX is not set
|
|
+# CONFIG_MIPS_COBALT is not set
|
|
+# CONFIG_MACH_DECSTATION is not set
|
|
+# CONFIG_MACH_JAZZ is not set
|
|
+# CONFIG_LASAT is not set
|
|
+# CONFIG_LEMOTE_FULONG is not set
|
|
+# CONFIG_MIPS_ATLAS is not set
|
|
+# CONFIG_MIPS_MALTA is not set
|
|
+# CONFIG_MIPS_SEAD is not set
|
|
+# CONFIG_MIPS_SIM is not set
|
|
+# CONFIG_MARKEINS is not set
|
|
+# CONFIG_MACH_VR41XX is not set
|
|
+# CONFIG_PNX8550_JBS is not set
|
|
+# CONFIG_PNX8550_STB810 is not set
|
|
+# CONFIG_PMC_MSP is not set
|
|
+# CONFIG_PMC_YOSEMITE is not set
|
|
+# CONFIG_QEMU is not set
|
|
+# CONFIG_SGI_IP22 is not set
|
|
+# CONFIG_SGI_IP27 is not set
|
|
+# CONFIG_SGI_IP32 is not set
|
|
+# CONFIG_SIBYTE_CRHINE is not set
|
|
+# CONFIG_SIBYTE_CARMEL is not set
|
|
+# CONFIG_SIBYTE_CRHONE is not set
|
|
+# CONFIG_SIBYTE_RHONE is not set
|
|
+# CONFIG_SIBYTE_SWARM is not set
|
|
+# CONFIG_SIBYTE_LITTLESUR is not set
|
|
+# CONFIG_SIBYTE_SENTOSA is not set
|
|
+# CONFIG_SIBYTE_PTSWARM is not set
|
|
+# CONFIG_SIBYTE_BIGSUR is not set
|
|
+# CONFIG_SNI_RM is not set
|
|
+# CONFIG_TOSHIBA_JMR3927 is not set
|
|
+# CONFIG_TOSHIBA_RBTX4927 is not set
|
|
+# CONFIG_TOSHIBA_RBTX4938 is not set
|
|
+# CONFIG_WR_PPMC is not set
|
|
+CONFIG_SOC_JZ4750=y
|
|
+CONFIG_JZSOC=y
|
|
+CONFIG_JZRISC=y
|
|
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
|
+CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|
+CONFIG_GENERIC_HWEIGHT=y
|
|
+CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
+CONFIG_GENERIC_CLOCKEVENTS=y
|
|
+CONFIG_GENERIC_TIME=y
|
|
+CONFIG_GENERIC_CMOS_UPDATE=y
|
|
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
|
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
|
|
+CONFIG_DMA_NONCOHERENT=y
|
|
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
|
+# CONFIG_HOTPLUG_CPU is not set
|
|
+# CONFIG_NO_IOPORT is not set
|
|
+# CONFIG_CPU_BIG_ENDIAN is not set
|
|
+CONFIG_CPU_LITTLE_ENDIAN=y
|
|
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
|
+CONFIG_MIPS_L1_CACHE_SHIFT=5
|
|
+
|
|
+#
|
|
+# CPU selection
|
|
+#
|
|
+# CONFIG_CPU_LOONGSON2 is not set
|
|
+CONFIG_CPU_MIPS32_R1=y
|
|
+# CONFIG_CPU_MIPS32_R2 is not set
|
|
+# CONFIG_CPU_MIPS64_R1 is not set
|
|
+# CONFIG_CPU_MIPS64_R2 is not set
|
|
+# CONFIG_CPU_R3000 is not set
|
|
+# CONFIG_CPU_TX39XX is not set
|
|
+# CONFIG_CPU_VR41XX is not set
|
|
+# CONFIG_CPU_R4300 is not set
|
|
+# CONFIG_CPU_R4X00 is not set
|
|
+# CONFIG_CPU_TX49XX is not set
|
|
+# CONFIG_CPU_R5000 is not set
|
|
+# CONFIG_CPU_R5432 is not set
|
|
+# CONFIG_CPU_R6000 is not set
|
|
+# CONFIG_CPU_NEVADA is not set
|
|
+# CONFIG_CPU_R8000 is not set
|
|
+# CONFIG_CPU_R10000 is not set
|
|
+# CONFIG_CPU_RM7000 is not set
|
|
+# CONFIG_CPU_RM9000 is not set
|
|
+# CONFIG_CPU_SB1 is not set
|
|
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
|
+CONFIG_CPU_MIPS32=y
|
|
+CONFIG_CPU_MIPSR1=y
|
|
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
|
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
|
+
|
|
+#
|
|
+# Kernel type
|
|
+#
|
|
+CONFIG_32BIT=y
|
|
+# CONFIG_64BIT is not set
|
|
+CONFIG_PAGE_SIZE_4KB=y
|
|
+# CONFIG_PAGE_SIZE_8KB is not set
|
|
+# CONFIG_PAGE_SIZE_16KB is not set
|
|
+# CONFIG_PAGE_SIZE_64KB is not set
|
|
+CONFIG_CPU_HAS_PREFETCH=y
|
|
+CONFIG_MIPS_MT_DISABLED=y
|
|
+# CONFIG_MIPS_MT_SMP is not set
|
|
+# CONFIG_MIPS_MT_SMTC is not set
|
|
+CONFIG_CPU_HAS_LLSC=y
|
|
+CONFIG_CPU_HAS_SYNC=y
|
|
+CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_GENERIC_IRQ_PROBE=y
|
|
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
|
+CONFIG_ARCH_FLATMEM_ENABLE=y
|
|
+CONFIG_ARCH_POPULATES_NODE_MAP=y
|
|
+CONFIG_SELECT_MEMORY_MODEL=y
|
|
+CONFIG_FLATMEM_MANUAL=y
|
|
+# CONFIG_DISCONTIGMEM_MANUAL is not set
|
|
+# CONFIG_SPARSEMEM_MANUAL is not set
|
|
+CONFIG_FLATMEM=y
|
|
+CONFIG_FLAT_NODE_MEM_MAP=y
|
|
+# CONFIG_SPARSEMEM_STATIC is not set
|
|
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
|
+CONFIG_SPLIT_PTLOCK_CPUS=4
|
|
+# CONFIG_RESOURCES_64BIT is not set
|
|
+CONFIG_ZONE_DMA_FLAG=0
|
|
+CONFIG_VIRT_TO_BUS=y
|
|
+# CONFIG_TICK_ONESHOT is not set
|
|
+# CONFIG_NO_HZ is not set
|
|
+# CONFIG_HIGH_RES_TIMERS is not set
|
|
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
+# CONFIG_HZ_48 is not set
|
|
+CONFIG_HZ_100=y
|
|
+# CONFIG_HZ_128 is not set
|
|
+# CONFIG_HZ_250 is not set
|
|
+# CONFIG_HZ_256 is not set
|
|
+# CONFIG_HZ_1000 is not set
|
|
+# CONFIG_HZ_1024 is not set
|
|
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
|
+CONFIG_HZ=100
|
|
+# CONFIG_PREEMPT_NONE is not set
|
|
+# CONFIG_PREEMPT_VOLUNTARY is not set
|
|
+CONFIG_PREEMPT=y
|
|
+CONFIG_PREEMPT_BKL=y
|
|
+# CONFIG_KEXEC is not set
|
|
+CONFIG_SECCOMP=y
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
+
|
|
+#
|
|
+# General setup
|
|
+#
|
|
+CONFIG_EXPERIMENTAL=y
|
|
+CONFIG_BROKEN_ON_SMP=y
|
|
+CONFIG_LOCK_KERNEL=y
|
|
+CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
+CONFIG_LOCALVERSION=""
|
|
+CONFIG_LOCALVERSION_AUTO=y
|
|
+CONFIG_SWAP=y
|
|
+CONFIG_SYSVIPC=y
|
|
+CONFIG_SYSVIPC_SYSCTL=y
|
|
+# CONFIG_POSIX_MQUEUE is not set
|
|
+# CONFIG_BSD_PROCESS_ACCT is not set
|
|
+# CONFIG_TASKSTATS is not set
|
|
+# CONFIG_USER_NS is not set
|
|
+# CONFIG_PID_NS is not set
|
|
+# CONFIG_AUDIT is not set
|
|
+# CONFIG_IKCONFIG is not set
|
|
+CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_CGROUPS is not set
|
|
+CONFIG_FAIR_GROUP_SCHED=y
|
|
+CONFIG_FAIR_USER_SCHED=y
|
|
+# CONFIG_FAIR_CGROUP_SCHED is not set
|
|
+CONFIG_SYSFS_DEPRECATED=y
|
|
+CONFIG_RELAY=y
|
|
+# CONFIG_BLK_DEV_INITRD is not set
|
|
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
|
+CONFIG_SYSCTL=y
|
|
+CONFIG_EMBEDDED=y
|
|
+CONFIG_SYSCTL_SYSCALL=y
|
|
+CONFIG_KALLSYMS=y
|
|
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
|
+CONFIG_HOTPLUG=y
|
|
+CONFIG_PRINTK=y
|
|
+CONFIG_BUG=y
|
|
+CONFIG_ELF_CORE=y
|
|
+CONFIG_BASE_FULL=y
|
|
+CONFIG_FUTEX=y
|
|
+CONFIG_ANON_INODES=y
|
|
+CONFIG_EPOLL=y
|
|
+CONFIG_SIGNALFD=y
|
|
+CONFIG_EVENTFD=y
|
|
+CONFIG_SHMEM=y
|
|
+CONFIG_VM_EVENT_COUNTERS=y
|
|
+CONFIG_SLAB=y
|
|
+# CONFIG_SLUB is not set
|
|
+# CONFIG_SLOB is not set
|
|
+CONFIG_SLABINFO=y
|
|
+CONFIG_RT_MUTEXES=y
|
|
+# CONFIG_TINY_SHMEM is not set
|
|
+CONFIG_BASE_SMALL=0
|
|
+CONFIG_MODULES=y
|
|
+CONFIG_MODULE_UNLOAD=y
|
|
+# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
+CONFIG_MODVERSIONS=y
|
|
+CONFIG_MODULE_SRCVERSION_ALL=y
|
|
+CONFIG_KMOD=y
|
|
+CONFIG_BLOCK=y
|
|
+# CONFIG_LBD is not set
|
|
+# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
+# CONFIG_LSF is not set
|
|
+# CONFIG_BLK_DEV_BSG is not set
|
|
+
|
|
+#
|
|
+# IO Schedulers
|
|
+#
|
|
+CONFIG_IOSCHED_NOOP=y
|
|
+CONFIG_IOSCHED_AS=y
|
|
+CONFIG_IOSCHED_DEADLINE=y
|
|
+CONFIG_IOSCHED_CFQ=y
|
|
+CONFIG_DEFAULT_AS=y
|
|
+# CONFIG_DEFAULT_DEADLINE is not set
|
|
+# CONFIG_DEFAULT_CFQ is not set
|
|
+# CONFIG_DEFAULT_NOOP is not set
|
|
+CONFIG_DEFAULT_IOSCHED="anticipatory"
|
|
+
|
|
+#
|
|
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
|
|
+#
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
+CONFIG_MMU=y
|
|
+# CONFIG_PCCARD is not set
|
|
+
|
|
+#
|
|
+# Executable file formats
|
|
+#
|
|
+CONFIG_BINFMT_ELF=y
|
|
+# CONFIG_BINFMT_MISC is not set
|
|
+CONFIG_TRAD_SIGNALS=y
|
|
+
|
|
+#
|
|
+# CPU Frequency scaling
|
|
+#
|
|
+# CONFIG_CPU_FREQ_JZ is not set
|
|
+
|
|
+#
|
|
+# Power management options
|
|
+#
|
|
+# CONFIG_PM is not set
|
|
+CONFIG_SUSPEND_UP_POSSIBLE=y
|
|
+
|
|
+#
|
|
+# Networking
|
|
+#
|
|
+CONFIG_NET=y
|
|
+
|
|
+#
|
|
+# Networking options
|
|
+#
|
|
+CONFIG_PACKET=y
|
|
+# CONFIG_PACKET_MMAP is not set
|
|
+CONFIG_UNIX=y
|
|
+# CONFIG_NET_KEY is not set
|
|
+CONFIG_INET=y
|
|
+# CONFIG_IP_MULTICAST is not set
|
|
+# CONFIG_IP_ADVANCED_ROUTER is not set
|
|
+CONFIG_IP_FIB_HASH=y
|
|
+CONFIG_IP_PNP=y
|
|
+CONFIG_IP_PNP_DHCP=y
|
|
+CONFIG_IP_PNP_BOOTP=y
|
|
+# CONFIG_IP_PNP_RARP is not set
|
|
+# CONFIG_NET_IPIP is not set
|
|
+# CONFIG_NET_IPGRE is not set
|
|
+# CONFIG_ARPD is not set
|
|
+# CONFIG_SYN_COOKIES is not set
|
|
+# CONFIG_INET_AH is not set
|
|
+# CONFIG_INET_ESP is not set
|
|
+# CONFIG_INET_IPCOMP is not set
|
|
+# CONFIG_INET_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
|
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_BEET is not set
|
|
+# CONFIG_INET_LRO is not set
|
|
+CONFIG_INET_DIAG=m
|
|
+CONFIG_INET_TCP_DIAG=m
|
|
+# CONFIG_TCP_CONG_ADVANCED is not set
|
|
+CONFIG_TCP_CONG_CUBIC=y
|
|
+CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
+# CONFIG_TCP_MD5SIG is not set
|
|
+# CONFIG_IPV6 is not set
|
|
+# CONFIG_INET6_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET6_TUNNEL is not set
|
|
+# CONFIG_NETWORK_SECMARK is not set
|
|
+# CONFIG_NETFILTER is not set
|
|
+# CONFIG_IP_DCCP is not set
|
|
+# CONFIG_IP_SCTP is not set
|
|
+# CONFIG_TIPC is not set
|
|
+# CONFIG_ATM is not set
|
|
+# CONFIG_BRIDGE is not set
|
|
+# CONFIG_VLAN_8021Q is not set
|
|
+# CONFIG_DECNET is not set
|
|
+# CONFIG_LLC2 is not set
|
|
+# CONFIG_IPX is not set
|
|
+# CONFIG_ATALK is not set
|
|
+# CONFIG_X25 is not set
|
|
+# CONFIG_LAPB is not set
|
|
+# CONFIG_ECONET is not set
|
|
+# CONFIG_WAN_ROUTER is not set
|
|
+# CONFIG_NET_SCHED is not set
|
|
+
|
|
+#
|
|
+# Network testing
|
|
+#
|
|
+# CONFIG_NET_PKTGEN is not set
|
|
+# CONFIG_HAMRADIO is not set
|
|
+# CONFIG_IRDA is not set
|
|
+# CONFIG_BT is not set
|
|
+# CONFIG_AF_RXRPC is not set
|
|
+
|
|
+#
|
|
+# Wireless
|
|
+#
|
|
+# CONFIG_CFG80211 is not set
|
|
+CONFIG_WIRELESS_EXT=y
|
|
+# CONFIG_MAC80211 is not set
|
|
+# CONFIG_IEEE80211 is not set
|
|
+# CONFIG_RFKILL is not set
|
|
+# CONFIG_NET_9P is not set
|
|
+
|
|
+#
|
|
+# Device Drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# Generic Driver Options
|
|
+#
|
|
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
+CONFIG_STANDALONE=y
|
|
+CONFIG_PREVENT_FIRMWARE_BUILD=y
|
|
+# CONFIG_FW_LOADER is not set
|
|
+# CONFIG_SYS_HYPERVISOR is not set
|
|
+# CONFIG_CONNECTOR is not set
|
|
+CONFIG_MTD=y
|
|
+# CONFIG_MTD_DEBUG is not set
|
|
+# CONFIG_MTD_CONCAT is not set
|
|
+CONFIG_MTD_PARTITIONS=y
|
|
+# CONFIG_MTD_REDBOOT_PARTS is not set
|
|
+# CONFIG_MTD_CMDLINE_PARTS is not set
|
|
+
|
|
+#
|
|
+# User Modules And Translation Layers
|
|
+#
|
|
+CONFIG_MTD_CHAR=y
|
|
+CONFIG_MTD_BLKDEVS=y
|
|
+CONFIG_MTD_BLOCK=y
|
|
+# CONFIG_FTL is not set
|
|
+# CONFIG_NFTL is not set
|
|
+# CONFIG_INFTL is not set
|
|
+# CONFIG_RFD_FTL is not set
|
|
+# CONFIG_SSFDC is not set
|
|
+# CONFIG_MTD_OOPS is not set
|
|
+
|
|
+#
|
|
+# RAM/ROM/Flash chip drivers
|
|
+#
|
|
+# CONFIG_MTD_CFI is not set
|
|
+# CONFIG_MTD_JEDECPROBE is not set
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
|
+CONFIG_MTD_CFI_I1=y
|
|
+CONFIG_MTD_CFI_I2=y
|
|
+# CONFIG_MTD_CFI_I4 is not set
|
|
+# CONFIG_MTD_CFI_I8 is not set
|
|
+# CONFIG_MTD_RAM is not set
|
|
+# CONFIG_MTD_ROM is not set
|
|
+# CONFIG_MTD_ABSENT is not set
|
|
+
|
|
+#
|
|
+# Mapping drivers for chip access
|
|
+#
|
|
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
|
+# CONFIG_MTD_PLATRAM is not set
|
|
+
|
|
+#
|
|
+# Self-contained MTD device drivers
|
|
+#
|
|
+# CONFIG_MTD_SLRAM is not set
|
|
+# CONFIG_MTD_PHRAM is not set
|
|
+# CONFIG_MTD_MTDRAM is not set
|
|
+# CONFIG_MTD_BLOCK2MTD is not set
|
|
+
|
|
+#
|
|
+# Disk-On-Chip Device Drivers
|
|
+#
|
|
+# CONFIG_MTD_DOC2000 is not set
|
|
+# CONFIG_MTD_DOC2001 is not set
|
|
+# CONFIG_MTD_DOC2001PLUS is not set
|
|
+CONFIG_MTD_NAND=y
|
|
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
|
|
+# CONFIG_MTD_NAND_ECC_SMC is not set
|
|
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
|
|
+CONFIG_MTD_NAND_IDS=y
|
|
+# CONFIG_MTD_NAND_DISKONCHIP is not set
|
|
+# CONFIG_MTD_NAND_NANDSIM is not set
|
|
+# CONFIG_MTD_NAND_PLATFORM is not set
|
|
+# CONFIG_MTD_ALAUDA is not set
|
|
+CONFIG_MTD_NAND_JZ4750=y
|
|
+# CONFIG_MTD_NAND_CS2 is not set
|
|
+# CONFIG_MTD_NAND_CS3 is not set
|
|
+# CONFIG_MTD_NAND_CS4 is not set
|
|
+# CONFIG_MTD_NAND_MULTI_PLANE is not set
|
|
+# CONFIG_MTD_HW_HM_ECC is not set
|
|
+# CONFIG_MTD_SW_HM_ECC is not set
|
|
+# CONFIG_MTD_HW_RS_ECC is not set
|
|
+CONFIG_MTD_HW_BCH_ECC=y
|
|
+CONFIG_MTD_HW_BCH_4BIT=y
|
|
+# CONFIG_MTD_HW_BCH_8BIT is not set
|
|
+CONFIG_MTD_NAND_DMA=y
|
|
+# CONFIG_MTD_NAND_DMABUF is not set
|
|
+# CONFIG_MTD_MTDBLOCK_WRITE_VERIFY_ENABLE is not set
|
|
+CONFIG_MTD_OOB_COPIES=3
|
|
+CONFIG_MTD_BADBLOCK_FLAG_PAGE=127
|
|
+# CONFIG_MTD_ONENAND is not set
|
|
+
|
|
+#
|
|
+# UBI - Unsorted block images
|
|
+#
|
|
+# CONFIG_MTD_UBI is not set
|
|
+# CONFIG_MTD_UBI_BLKDEVS is not set
|
|
+# CONFIG_PARPORT is not set
|
|
+# CONFIG_PNP is not set
|
|
+CONFIG_BLK_DEV=y
|
|
+# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
+CONFIG_BLK_DEV_LOOP=y
|
|
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
|
+# CONFIG_BLK_DEV_NBD is not set
|
|
+# CONFIG_BLK_DEV_UB is not set
|
|
+CONFIG_BLK_DEV_RAM=y
|
|
+CONFIG_BLK_DEV_RAM_COUNT=16
|
|
+CONFIG_BLK_DEV_RAM_SIZE=4096
|
|
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
+# CONFIG_CDROM_PKTCDVD is not set
|
|
+# CONFIG_ATA_OVER_ETH is not set
|
|
+CONFIG_MISC_DEVICES=y
|
|
+# CONFIG_EEPROM_93CX6 is not set
|
|
+# CONFIG_IDE is not set
|
|
+
|
|
+#
|
|
+# SCSI device support
|
|
+#
|
|
+# CONFIG_RAID_ATTRS is not set
|
|
+CONFIG_SCSI=y
|
|
+CONFIG_SCSI_DMA=y
|
|
+# CONFIG_SCSI_TGT is not set
|
|
+# CONFIG_SCSI_NETLINK is not set
|
|
+CONFIG_SCSI_PROC_FS=y
|
|
+
|
|
+#
|
|
+# SCSI support type (disk, tape, CD-ROM)
|
|
+#
|
|
+CONFIG_BLK_DEV_SD=y
|
|
+# CONFIG_CHR_DEV_ST is not set
|
|
+# CONFIG_CHR_DEV_OSST is not set
|
|
+# CONFIG_BLK_DEV_SR is not set
|
|
+# CONFIG_CHR_DEV_SG is not set
|
|
+# CONFIG_CHR_DEV_SCH is not set
|
|
+
|
|
+#
|
|
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
|
+#
|
|
+# CONFIG_SCSI_MULTI_LUN is not set
|
|
+# CONFIG_SCSI_CONSTANTS is not set
|
|
+# CONFIG_SCSI_LOGGING is not set
|
|
+# CONFIG_SCSI_SCAN_ASYNC is not set
|
|
+CONFIG_SCSI_WAIT_SCAN=m
|
|
+
|
|
+#
|
|
+# SCSI Transports
|
|
+#
|
|
+# CONFIG_SCSI_SPI_ATTRS is not set
|
|
+# CONFIG_SCSI_FC_ATTRS is not set
|
|
+# CONFIG_SCSI_ISCSI_ATTRS is not set
|
|
+# CONFIG_SCSI_SAS_LIBSAS is not set
|
|
+# CONFIG_SCSI_SRP_ATTRS is not set
|
|
+CONFIG_SCSI_LOWLEVEL=y
|
|
+# CONFIG_ISCSI_TCP is not set
|
|
+# CONFIG_SCSI_DEBUG is not set
|
|
+# CONFIG_ATA is not set
|
|
+# CONFIG_MD is not set
|
|
+# CONFIG_NETDEVICES is not set
|
|
+# CONFIG_ISDN is not set
|
|
+# CONFIG_PHONE is not set
|
|
+
|
|
+#
|
|
+# Input device support
|
|
+#
|
|
+CONFIG_INPUT=y
|
|
+# CONFIG_INPUT_FF_MEMLESS is not set
|
|
+# CONFIG_INPUT_POLLDEV is not set
|
|
+
|
|
+#
|
|
+# Userland interfaces
|
|
+#
|
|
+CONFIG_INPUT_MOUSEDEV=y
|
|
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
|
+# CONFIG_INPUT_JOYDEV is not set
|
|
+# CONFIG_INPUT_EVDEV is not set
|
|
+# CONFIG_INPUT_EVBUG is not set
|
|
+
|
|
+#
|
|
+# Input Device Drivers
|
|
+#
|
|
+CONFIG_INPUT_KEYBOARD=y
|
|
+CONFIG_KEYBOARD_ATKBD=y
|
|
+# CONFIG_KEYBOARD_SUNKBD is not set
|
|
+# CONFIG_KEYBOARD_LKKBD is not set
|
|
+# CONFIG_KEYBOARD_XTKBD is not set
|
|
+# CONFIG_KEYBOARD_NEWTON is not set
|
|
+# CONFIG_KEYBOARD_STOWAWAY is not set
|
|
+# CONFIG_KEYBOARD_JZ is not set
|
|
+# CONFIG_KEYBOARD_GPIO is not set
|
|
+# CONFIG_INPUT_MOUSE is not set
|
|
+# CONFIG_INPUT_JOYSTICK is not set
|
|
+# CONFIG_INPUT_TABLET is not set
|
|
+# CONFIG_INPUT_TOUCHSCREEN is not set
|
|
+# CONFIG_INPUT_MISC is not set
|
|
+
|
|
+#
|
|
+# Hardware I/O ports
|
|
+#
|
|
+CONFIG_SERIO=y
|
|
+# CONFIG_SERIO_I8042 is not set
|
|
+CONFIG_SERIO_SERPORT=y
|
|
+CONFIG_SERIO_LIBPS2=y
|
|
+# CONFIG_SERIO_RAW is not set
|
|
+# CONFIG_GAMEPORT is not set
|
|
+
|
|
+#
|
|
+# Character devices
|
|
+#
|
|
+CONFIG_VT=y
|
|
+CONFIG_VT_CONSOLE=y
|
|
+CONFIG_HW_CONSOLE=y
|
|
+CONFIG_VT_HW_CONSOLE_BINDING=y
|
|
+# CONFIG_SERIAL_NONSTANDARD is not set
|
|
+
|
|
+#
|
|
+# Serial drivers
|
|
+#
|
|
+CONFIG_SERIAL_8250=y
|
|
+CONFIG_SERIAL_8250_CONSOLE=y
|
|
+CONFIG_SERIAL_8250_NR_UARTS=4
|
|
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
|
|
+# CONFIG_SERIAL_8250_EXTENDED is not set
|
|
+
|
|
+#
|
|
+# Non-8250 serial port support
|
|
+#
|
|
+CONFIG_SERIAL_CORE=y
|
|
+CONFIG_SERIAL_CORE_CONSOLE=y
|
|
+CONFIG_UNIX98_PTYS=y
|
|
+CONFIG_LEGACY_PTYS=y
|
|
+CONFIG_LEGACY_PTY_COUNT=2
|
|
+# CONFIG_IPMI_HANDLER is not set
|
|
+# CONFIG_HW_RANDOM is not set
|
|
+# CONFIG_RTC is not set
|
|
+# CONFIG_RTC_PCF8563 is not set
|
|
+# CONFIG_RTC_JZ is not set
|
|
+# CONFIG_R3964 is not set
|
|
+# CONFIG_RAW_DRIVER is not set
|
|
+# CONFIG_TCG_TPM is not set
|
|
+
|
|
+#
|
|
+# JZSOC char device support
|
|
+#
|
|
+CONFIG_JZCHAR=y
|
|
+# CONFIG_JZ_CIM is not set
|
|
+# CONFIG_JZ_TPANEL_ATA2508 is not set
|
|
+# CONFIG_JZ_TPANEL is not set
|
|
+CONFIG_JZ_UDC_HOTPLUG=y
|
|
+# CONFIG_JZ_POWEROFF is not set
|
|
+# CONFIG_JZ_OW is not set
|
|
+# CONFIG_I2C is not set
|
|
+
|
|
+#
|
|
+# SPI support
|
|
+#
|
|
+# CONFIG_SPI is not set
|
|
+# CONFIG_SPI_MASTER is not set
|
|
+# CONFIG_W1 is not set
|
|
+# CONFIG_POWER_SUPPLY is not set
|
|
+# CONFIG_HWMON is not set
|
|
+# CONFIG_WATCHDOG is not set
|
|
+
|
|
+#
|
|
+# Sonics Silicon Backplane
|
|
+#
|
|
+CONFIG_SSB_POSSIBLE=y
|
|
+# CONFIG_SSB is not set
|
|
+
|
|
+#
|
|
+# Multifunction device drivers
|
|
+#
|
|
+# CONFIG_MFD_SM501 is not set
|
|
+
|
|
+#
|
|
+# Multimedia devices
|
|
+#
|
|
+# CONFIG_VIDEO_DEV is not set
|
|
+# CONFIG_DVB_CORE is not set
|
|
+# CONFIG_DAB is not set
|
|
+
|
|
+#
|
|
+# Graphics support
|
|
+#
|
|
+# CONFIG_VGASTATE is not set
|
|
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
|
+# CONFIG_FB is not set
|
|
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Display device support
|
|
+#
|
|
+# CONFIG_DISPLAY_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Console display driver support
|
|
+#
|
|
+# CONFIG_VGA_CONSOLE is not set
|
|
+CONFIG_DUMMY_CONSOLE=y
|
|
+
|
|
+#
|
|
+# Sound
|
|
+#
|
|
+# CONFIG_SOUND is not set
|
|
+CONFIG_HID_SUPPORT=y
|
|
+CONFIG_HID=y
|
|
+# CONFIG_HID_DEBUG is not set
|
|
+# CONFIG_HIDRAW is not set
|
|
+
|
|
+#
|
|
+# USB Input Devices
|
|
+#
|
|
+CONFIG_USB_HID=y
|
|
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
|
|
+# CONFIG_HID_FF is not set
|
|
+CONFIG_USB_HIDDEV=y
|
|
+CONFIG_USB_SUPPORT=y
|
|
+CONFIG_USB_ARCH_HAS_HCD=y
|
|
+CONFIG_USB_ARCH_HAS_OHCI=y
|
|
+# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
+CONFIG_USB=y
|
|
+# CONFIG_USB_DEBUG is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous USB options
|
|
+#
|
|
+# CONFIG_USB_DEVICEFS is not set
|
|
+CONFIG_USB_DEVICE_CLASS=y
|
|
+# CONFIG_USB_DYNAMIC_MINORS is not set
|
|
+# CONFIG_USB_OTG is not set
|
|
+
|
|
+#
|
|
+# USB Host Controller Drivers
|
|
+#
|
|
+# CONFIG_USB_ISP116X_HCD is not set
|
|
+CONFIG_USB_OHCI_HCD=y
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
|
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
|
+# CONFIG_USB_SL811_HCD is not set
|
|
+# CONFIG_USB_R8A66597_HCD is not set
|
|
+
|
|
+#
|
|
+# USB Device Class drivers
|
|
+#
|
|
+# CONFIG_USB_ACM is not set
|
|
+# CONFIG_USB_PRINTER is not set
|
|
+
|
|
+#
|
|
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
+#
|
|
+
|
|
+#
|
|
+# may also be needed; see USB_STORAGE Help for more information
|
|
+#
|
|
+CONFIG_USB_STORAGE=y
|
|
+# CONFIG_USB_STORAGE_DEBUG is not set
|
|
+# CONFIG_USB_STORAGE_DATAFAB is not set
|
|
+# CONFIG_USB_STORAGE_FREECOM is not set
|
|
+# CONFIG_USB_STORAGE_ISD200 is not set
|
|
+# CONFIG_USB_STORAGE_DPCM is not set
|
|
+# CONFIG_USB_STORAGE_USBAT is not set
|
|
+# CONFIG_USB_STORAGE_SDDR09 is not set
|
|
+# CONFIG_USB_STORAGE_SDDR55 is not set
|
|
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
|
|
+# CONFIG_USB_STORAGE_ALAUDA is not set
|
|
+# CONFIG_USB_STORAGE_KARMA is not set
|
|
+# CONFIG_USB_LIBUSUAL is not set
|
|
+
|
|
+#
|
|
+# USB Imaging devices
|
|
+#
|
|
+# CONFIG_USB_MDC800 is not set
|
|
+# CONFIG_USB_MICROTEK is not set
|
|
+CONFIG_USB_MON=y
|
|
+
|
|
+#
|
|
+# USB port drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Serial Converter support
|
|
+#
|
|
+# CONFIG_USB_SERIAL is not set
|
|
+
|
|
+#
|
|
+# USB Miscellaneous drivers
|
|
+#
|
|
+# CONFIG_USB_EMI62 is not set
|
|
+# CONFIG_USB_EMI26 is not set
|
|
+# CONFIG_USB_ADUTUX is not set
|
|
+# CONFIG_USB_AUERSWALD is not set
|
|
+# CONFIG_USB_RIO500 is not set
|
|
+# CONFIG_USB_LEGOTOWER is not set
|
|
+# CONFIG_USB_LCD is not set
|
|
+# CONFIG_USB_BERRY_CHARGE is not set
|
|
+# CONFIG_USB_LED is not set
|
|
+# CONFIG_USB_CYPRESS_CY7C63 is not set
|
|
+# CONFIG_USB_CYTHERM is not set
|
|
+# CONFIG_USB_PHIDGET is not set
|
|
+# CONFIG_USB_IDMOUSE is not set
|
|
+# CONFIG_USB_FTDI_ELAN is not set
|
|
+# CONFIG_USB_APPLEDISPLAY is not set
|
|
+# CONFIG_USB_LD is not set
|
|
+# CONFIG_USB_TRANCEVIBRATOR is not set
|
|
+# CONFIG_USB_IOWARRIOR is not set
|
|
+
|
|
+#
|
|
+# USB DSL modem support
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Gadget Support
|
|
+#
|
|
+# CONFIG_USB_GADGET is not set
|
|
+# CONFIG_MMC is not set
|
|
+# CONFIG_NEW_LEDS is not set
|
|
+CONFIG_RTC_LIB=y
|
|
+# CONFIG_RTC_CLASS is not set
|
|
+
|
|
+#
|
|
+# Userspace I/O
|
|
+#
|
|
+# CONFIG_UIO is not set
|
|
+
|
|
+#
|
|
+# File systems
|
|
+#
|
|
+CONFIG_EXT2_FS=y
|
|
+CONFIG_EXT2_FS_XATTR=y
|
|
+# CONFIG_EXT2_FS_POSIX_ACL is not set
|
|
+# CONFIG_EXT2_FS_SECURITY is not set
|
|
+# CONFIG_EXT2_FS_XIP is not set
|
|
+# CONFIG_EXT3_FS is not set
|
|
+# CONFIG_EXT4DEV_FS is not set
|
|
+CONFIG_FS_MBCACHE=y
|
|
+# CONFIG_REISERFS_FS is not set
|
|
+# CONFIG_JFS_FS is not set
|
|
+CONFIG_FS_POSIX_ACL=y
|
|
+# CONFIG_XFS_FS is not set
|
|
+# CONFIG_GFS2_FS is not set
|
|
+# CONFIG_OCFS2_FS is not set
|
|
+CONFIG_MINIX_FS=y
|
|
+# CONFIG_ROMFS_FS is not set
|
|
+CONFIG_INOTIFY=y
|
|
+CONFIG_INOTIFY_USER=y
|
|
+# CONFIG_QUOTA is not set
|
|
+CONFIG_DNOTIFY=y
|
|
+# CONFIG_AUTOFS_FS is not set
|
|
+# CONFIG_AUTOFS4_FS is not set
|
|
+# CONFIG_FUSE_FS is not set
|
|
+
|
|
+#
|
|
+# CD-ROM/DVD Filesystems
|
|
+#
|
|
+# CONFIG_ISO9660_FS is not set
|
|
+# CONFIG_UDF_FS is not set
|
|
+
|
|
+#
|
|
+# DOS/FAT/NT Filesystems
|
|
+#
|
|
+CONFIG_FAT_FS=y
|
|
+CONFIG_MSDOS_FS=y
|
|
+CONFIG_VFAT_FS=y
|
|
+CONFIG_FAT_DEFAULT_CODEPAGE=437
|
|
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
|
+# CONFIG_NTFS_FS is not set
|
|
+
|
|
+#
|
|
+# Pseudo filesystems
|
|
+#
|
|
+CONFIG_PROC_FS=y
|
|
+CONFIG_PROC_KCORE=y
|
|
+CONFIG_PROC_SYSCTL=y
|
|
+CONFIG_SYSFS=y
|
|
+CONFIG_TMPFS=y
|
|
+# CONFIG_TMPFS_POSIX_ACL is not set
|
|
+# CONFIG_HUGETLB_PAGE is not set
|
|
+# CONFIG_CONFIGFS_FS is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous filesystems
|
|
+#
|
|
+# CONFIG_ADFS_FS is not set
|
|
+# CONFIG_AFFS_FS is not set
|
|
+# CONFIG_HFS_FS is not set
|
|
+# CONFIG_HFSPLUS_FS is not set
|
|
+# CONFIG_BEFS_FS is not set
|
|
+# CONFIG_BFS_FS is not set
|
|
+# CONFIG_EFS_FS is not set
|
|
+# CONFIG_JFFS2_FS is not set
|
|
+# CONFIG_CRAMFS is not set
|
|
+# CONFIG_VXFS_FS is not set
|
|
+# CONFIG_HPFS_FS is not set
|
|
+# CONFIG_QNX4FS_FS is not set
|
|
+# CONFIG_SYSV_FS is not set
|
|
+# CONFIG_UFS_FS is not set
|
|
+CONFIG_NETWORK_FILESYSTEMS=y
|
|
+CONFIG_NFS_FS=y
|
|
+CONFIG_NFS_V3=y
|
|
+CONFIG_NFS_V3_ACL=y
|
|
+CONFIG_NFS_V4=y
|
|
+CONFIG_NFS_DIRECTIO=y
|
|
+# CONFIG_NFSD is not set
|
|
+CONFIG_ROOT_NFS=y
|
|
+CONFIG_LOCKD=y
|
|
+CONFIG_LOCKD_V4=y
|
|
+CONFIG_NFS_ACL_SUPPORT=y
|
|
+CONFIG_NFS_COMMON=y
|
|
+CONFIG_SUNRPC=y
|
|
+CONFIG_SUNRPC_GSS=y
|
|
+# CONFIG_SUNRPC_BIND34 is not set
|
|
+CONFIG_RPCSEC_GSS_KRB5=y
|
|
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
|
+# CONFIG_SMB_FS is not set
|
|
+# CONFIG_CIFS is not set
|
|
+# CONFIG_NCP_FS is not set
|
|
+# CONFIG_CODA_FS is not set
|
|
+# CONFIG_AFS_FS is not set
|
|
+
|
|
+#
|
|
+# Partition Types
|
|
+#
|
|
+CONFIG_PARTITION_ADVANCED=y
|
|
+# CONFIG_ACORN_PARTITION is not set
|
|
+# CONFIG_OSF_PARTITION is not set
|
|
+# CONFIG_AMIGA_PARTITION is not set
|
|
+# CONFIG_ATARI_PARTITION is not set
|
|
+# CONFIG_MAC_PARTITION is not set
|
|
+CONFIG_MSDOS_PARTITION=y
|
|
+# CONFIG_BSD_DISKLABEL is not set
|
|
+# CONFIG_MINIX_SUBPARTITION is not set
|
|
+# CONFIG_SOLARIS_X86_PARTITION is not set
|
|
+# CONFIG_UNIXWARE_DISKLABEL is not set
|
|
+# CONFIG_LDM_PARTITION is not set
|
|
+# CONFIG_SGI_PARTITION is not set
|
|
+# CONFIG_ULTRIX_PARTITION is not set
|
|
+# CONFIG_SUN_PARTITION is not set
|
|
+# CONFIG_KARMA_PARTITION is not set
|
|
+# CONFIG_EFI_PARTITION is not set
|
|
+# CONFIG_SYSV68_PARTITION is not set
|
|
+CONFIG_NLS=y
|
|
+CONFIG_NLS_DEFAULT="iso8859-1"
|
|
+CONFIG_NLS_CODEPAGE_437=y
|
|
+# CONFIG_NLS_CODEPAGE_737 is not set
|
|
+# CONFIG_NLS_CODEPAGE_775 is not set
|
|
+# CONFIG_NLS_CODEPAGE_850 is not set
|
|
+# CONFIG_NLS_CODEPAGE_852 is not set
|
|
+# CONFIG_NLS_CODEPAGE_855 is not set
|
|
+# CONFIG_NLS_CODEPAGE_857 is not set
|
|
+# CONFIG_NLS_CODEPAGE_860 is not set
|
|
+# CONFIG_NLS_CODEPAGE_861 is not set
|
|
+# CONFIG_NLS_CODEPAGE_862 is not set
|
|
+# CONFIG_NLS_CODEPAGE_863 is not set
|
|
+# CONFIG_NLS_CODEPAGE_864 is not set
|
|
+# CONFIG_NLS_CODEPAGE_865 is not set
|
|
+# CONFIG_NLS_CODEPAGE_866 is not set
|
|
+# CONFIG_NLS_CODEPAGE_869 is not set
|
|
+CONFIG_NLS_CODEPAGE_936=y
|
|
+# CONFIG_NLS_CODEPAGE_950 is not set
|
|
+# CONFIG_NLS_CODEPAGE_932 is not set
|
|
+# CONFIG_NLS_CODEPAGE_949 is not set
|
|
+# CONFIG_NLS_CODEPAGE_874 is not set
|
|
+# CONFIG_NLS_ISO8859_8 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1250 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1251 is not set
|
|
+CONFIG_NLS_ASCII=y
|
|
+CONFIG_NLS_ISO8859_1=y
|
|
+# CONFIG_NLS_ISO8859_2 is not set
|
|
+# CONFIG_NLS_ISO8859_3 is not set
|
|
+# CONFIG_NLS_ISO8859_4 is not set
|
|
+# CONFIG_NLS_ISO8859_5 is not set
|
|
+# CONFIG_NLS_ISO8859_6 is not set
|
|
+# CONFIG_NLS_ISO8859_7 is not set
|
|
+# CONFIG_NLS_ISO8859_9 is not set
|
|
+# CONFIG_NLS_ISO8859_13 is not set
|
|
+# CONFIG_NLS_ISO8859_14 is not set
|
|
+# CONFIG_NLS_ISO8859_15 is not set
|
|
+# CONFIG_NLS_KOI8_R is not set
|
|
+# CONFIG_NLS_KOI8_U is not set
|
|
+# CONFIG_NLS_UTF8 is not set
|
|
+# CONFIG_DLM is not set
|
|
+
|
|
+#
|
|
+# Yaffs2 Filesystems
|
|
+#
|
|
+CONFIG_YAFFS_FS=y
|
|
+CONFIG_YAFFS_YAFFS1=y
|
|
+# CONFIG_YAFFS_DOES_ECC is not set
|
|
+CONFIG_YAFFS_YAFFS2=y
|
|
+# CONFIG_YAFFS_ECC_BCH is not set
|
|
+CONFIG_YAFFS_ECC_RS=y
|
|
+# CONFIG_YAFFS_ECC_HAMMING is not set
|
|
+CONFIG_YAFFS_AUTO_YAFFS2=y
|
|
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
|
|
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
|
|
+CONFIG_YAFFS_DISABLE_CHUNK_ERASED_CHECK=y
|
|
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
|
|
+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
|
|
+CONFIG_INSTRUMENTATION=y
|
|
+# CONFIG_PROFILING is not set
|
|
+# CONFIG_MARKERS is not set
|
|
+
|
|
+#
|
|
+# Kernel hacking
|
|
+#
|
|
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
+# CONFIG_PRINTK_TIME is not set
|
|
+CONFIG_ENABLE_WARN_DEPRECATED=y
|
|
+CONFIG_ENABLE_MUST_CHECK=y
|
|
+CONFIG_MAGIC_SYSRQ=y
|
|
+# CONFIG_UNUSED_SYMBOLS is not set
|
|
+# CONFIG_DEBUG_FS is not set
|
|
+# CONFIG_HEADERS_CHECK is not set
|
|
+# CONFIG_DEBUG_KERNEL is not set
|
|
+# CONFIG_SAMPLES is not set
|
|
+CONFIG_CMDLINE=""
|
|
+
|
|
+#
|
|
+# Security options
|
|
+#
|
|
+# CONFIG_KEYS is not set
|
|
+# CONFIG_SECURITY is not set
|
|
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
|
+CONFIG_CRYPTO=y
|
|
+CONFIG_CRYPTO_ALGAPI=y
|
|
+CONFIG_CRYPTO_BLKCIPHER=y
|
|
+CONFIG_CRYPTO_MANAGER=y
|
|
+# CONFIG_CRYPTO_HMAC is not set
|
|
+# CONFIG_CRYPTO_XCBC is not set
|
|
+# CONFIG_CRYPTO_NULL is not set
|
|
+# CONFIG_CRYPTO_MD4 is not set
|
|
+CONFIG_CRYPTO_MD5=y
|
|
+# CONFIG_CRYPTO_SHA1 is not set
|
|
+# CONFIG_CRYPTO_SHA256 is not set
|
|
+# CONFIG_CRYPTO_SHA512 is not set
|
|
+# CONFIG_CRYPTO_WP512 is not set
|
|
+# CONFIG_CRYPTO_TGR192 is not set
|
|
+# CONFIG_CRYPTO_GF128MUL is not set
|
|
+# CONFIG_CRYPTO_ECB is not set
|
|
+CONFIG_CRYPTO_CBC=y
|
|
+# CONFIG_CRYPTO_PCBC is not set
|
|
+# CONFIG_CRYPTO_LRW is not set
|
|
+# CONFIG_CRYPTO_XTS is not set
|
|
+# CONFIG_CRYPTO_CRYPTD is not set
|
|
+CONFIG_CRYPTO_DES=y
|
|
+# CONFIG_CRYPTO_FCRYPT is not set
|
|
+# CONFIG_CRYPTO_BLOWFISH is not set
|
|
+# CONFIG_CRYPTO_TWOFISH is not set
|
|
+# CONFIG_CRYPTO_SERPENT is not set
|
|
+# CONFIG_CRYPTO_AES is not set
|
|
+# CONFIG_CRYPTO_CAST5 is not set
|
|
+# CONFIG_CRYPTO_CAST6 is not set
|
|
+# CONFIG_CRYPTO_TEA is not set
|
|
+# CONFIG_CRYPTO_ARC4 is not set
|
|
+# CONFIG_CRYPTO_KHAZAD is not set
|
|
+# CONFIG_CRYPTO_ANUBIS is not set
|
|
+# CONFIG_CRYPTO_SEED is not set
|
|
+# CONFIG_CRYPTO_DEFLATE is not set
|
|
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
|
|
+# CONFIG_CRYPTO_CRC32C is not set
|
|
+# CONFIG_CRYPTO_CAMELLIA is not set
|
|
+# CONFIG_CRYPTO_TEST is not set
|
|
+# CONFIG_CRYPTO_AUTHENC is not set
|
|
+# CONFIG_CRYPTO_LZO is not set
|
|
+CONFIG_CRYPTO_HW=y
|
|
+
|
|
+#
|
|
+# Library routines
|
|
+#
|
|
+CONFIG_BITREVERSE=y
|
|
+# CONFIG_CRC_CCITT is not set
|
|
+# CONFIG_CRC16 is not set
|
|
+# CONFIG_CRC_ITU_T is not set
|
|
+CONFIG_CRC32=y
|
|
+# CONFIG_CRC7 is not set
|
|
+# CONFIG_LIBCRC32C is not set
|
|
+CONFIG_REED_SOLOMON=y
|
|
+CONFIG_REED_SOLOMON_ENC8=y
|
|
+CONFIG_REED_SOLOMON_DEC8=y
|
|
+CONFIG_PLIST=y
|
|
+CONFIG_HAS_IOMEM=y
|
|
+CONFIG_HAS_IOPORT=y
|
|
+CONFIG_HAS_DMA=y
|
|
--- linux-2.6.24.7.old/arch/mips/configs/virgo_defconfig 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/configs/virgo_defconfig 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,1281 @@
|
|
+#
|
|
+# Automatically generated make config: don't edit
|
|
+# Linux kernel version: 2.6.24.3
|
|
+# Thu Jun 12 13:52:15 2008
|
|
+#
|
|
+CONFIG_MIPS=y
|
|
+
|
|
+#
|
|
+# Machine selection
|
|
+#
|
|
+# CONFIG_JZ4730_PMP is not set
|
|
+# CONFIG_JZ4740_PAVO is not set
|
|
+# CONFIG_JZ4740_LEO is not set
|
|
+# CONFIG_JZ4740_LYRA is not set
|
|
+# CONFIG_JZ4725_DIPPER is not set
|
|
+CONFIG_JZ4720_VIRGO=y
|
|
+# CONFIG_JZ4750_FUWA is not set
|
|
+# CONFIG_MACH_ALCHEMY is not set
|
|
+# CONFIG_BASLER_EXCITE is not set
|
|
+# CONFIG_BCM47XX is not set
|
|
+# CONFIG_MIPS_COBALT is not set
|
|
+# CONFIG_MACH_DECSTATION is not set
|
|
+# CONFIG_MACH_JAZZ is not set
|
|
+# CONFIG_LASAT is not set
|
|
+# CONFIG_LEMOTE_FULONG is not set
|
|
+# CONFIG_MIPS_ATLAS is not set
|
|
+# CONFIG_MIPS_MALTA is not set
|
|
+# CONFIG_MIPS_SEAD is not set
|
|
+# CONFIG_MIPS_SIM is not set
|
|
+# CONFIG_MARKEINS is not set
|
|
+# CONFIG_MACH_VR41XX is not set
|
|
+# CONFIG_PNX8550_JBS is not set
|
|
+# CONFIG_PNX8550_STB810 is not set
|
|
+# CONFIG_PMC_MSP is not set
|
|
+# CONFIG_PMC_YOSEMITE is not set
|
|
+# CONFIG_QEMU is not set
|
|
+# CONFIG_SGI_IP22 is not set
|
|
+# CONFIG_SGI_IP27 is not set
|
|
+# CONFIG_SGI_IP32 is not set
|
|
+# CONFIG_SIBYTE_CRHINE is not set
|
|
+# CONFIG_SIBYTE_CARMEL is not set
|
|
+# CONFIG_SIBYTE_CRHONE is not set
|
|
+# CONFIG_SIBYTE_RHONE is not set
|
|
+# CONFIG_SIBYTE_SWARM is not set
|
|
+# CONFIG_SIBYTE_LITTLESUR is not set
|
|
+# CONFIG_SIBYTE_SENTOSA is not set
|
|
+# CONFIG_SIBYTE_PTSWARM is not set
|
|
+# CONFIG_SIBYTE_BIGSUR is not set
|
|
+# CONFIG_SNI_RM is not set
|
|
+# CONFIG_TOSHIBA_JMR3927 is not set
|
|
+# CONFIG_TOSHIBA_RBTX4927 is not set
|
|
+# CONFIG_TOSHIBA_RBTX4938 is not set
|
|
+# CONFIG_WR_PPMC is not set
|
|
+CONFIG_SOC_JZ4740=y
|
|
+CONFIG_SOC_JZ4720=y
|
|
+CONFIG_JZSOC=y
|
|
+CONFIG_JZRISC=y
|
|
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
|
+CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|
+CONFIG_GENERIC_HWEIGHT=y
|
|
+CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
+CONFIG_GENERIC_CLOCKEVENTS=y
|
|
+CONFIG_GENERIC_TIME=y
|
|
+CONFIG_GENERIC_CMOS_UPDATE=y
|
|
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
|
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
|
|
+CONFIG_DMA_NONCOHERENT=y
|
|
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
|
+# CONFIG_HOTPLUG_CPU is not set
|
|
+# CONFIG_NO_IOPORT is not set
|
|
+# CONFIG_CPU_BIG_ENDIAN is not set
|
|
+CONFIG_CPU_LITTLE_ENDIAN=y
|
|
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
|
+CONFIG_MIPS_L1_CACHE_SHIFT=5
|
|
+
|
|
+#
|
|
+# CPU selection
|
|
+#
|
|
+# CONFIG_CPU_LOONGSON2 is not set
|
|
+CONFIG_CPU_MIPS32_R1=y
|
|
+# CONFIG_CPU_MIPS32_R2 is not set
|
|
+# CONFIG_CPU_MIPS64_R1 is not set
|
|
+# CONFIG_CPU_MIPS64_R2 is not set
|
|
+# CONFIG_CPU_R3000 is not set
|
|
+# CONFIG_CPU_TX39XX is not set
|
|
+# CONFIG_CPU_VR41XX is not set
|
|
+# CONFIG_CPU_R4300 is not set
|
|
+# CONFIG_CPU_R4X00 is not set
|
|
+# CONFIG_CPU_TX49XX is not set
|
|
+# CONFIG_CPU_R5000 is not set
|
|
+# CONFIG_CPU_R5432 is not set
|
|
+# CONFIG_CPU_R6000 is not set
|
|
+# CONFIG_CPU_NEVADA is not set
|
|
+# CONFIG_CPU_R8000 is not set
|
|
+# CONFIG_CPU_R10000 is not set
|
|
+# CONFIG_CPU_RM7000 is not set
|
|
+# CONFIG_CPU_RM9000 is not set
|
|
+# CONFIG_CPU_SB1 is not set
|
|
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
|
+CONFIG_CPU_MIPS32=y
|
|
+CONFIG_CPU_MIPSR1=y
|
|
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
|
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
|
+
|
|
+#
|
|
+# Kernel type
|
|
+#
|
|
+CONFIG_32BIT=y
|
|
+# CONFIG_64BIT is not set
|
|
+CONFIG_PAGE_SIZE_4KB=y
|
|
+# CONFIG_PAGE_SIZE_8KB is not set
|
|
+# CONFIG_PAGE_SIZE_16KB is not set
|
|
+# CONFIG_PAGE_SIZE_64KB is not set
|
|
+CONFIG_CPU_HAS_PREFETCH=y
|
|
+CONFIG_MIPS_MT_DISABLED=y
|
|
+# CONFIG_MIPS_MT_SMP is not set
|
|
+# CONFIG_MIPS_MT_SMTC is not set
|
|
+CONFIG_CPU_HAS_LLSC=y
|
|
+CONFIG_CPU_HAS_SYNC=y
|
|
+CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_GENERIC_IRQ_PROBE=y
|
|
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
|
+CONFIG_ARCH_FLATMEM_ENABLE=y
|
|
+CONFIG_ARCH_POPULATES_NODE_MAP=y
|
|
+CONFIG_SELECT_MEMORY_MODEL=y
|
|
+CONFIG_FLATMEM_MANUAL=y
|
|
+# CONFIG_DISCONTIGMEM_MANUAL is not set
|
|
+# CONFIG_SPARSEMEM_MANUAL is not set
|
|
+CONFIG_FLATMEM=y
|
|
+CONFIG_FLAT_NODE_MEM_MAP=y
|
|
+# CONFIG_SPARSEMEM_STATIC is not set
|
|
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
|
+CONFIG_SPLIT_PTLOCK_CPUS=4
|
|
+# CONFIG_RESOURCES_64BIT is not set
|
|
+CONFIG_ZONE_DMA_FLAG=0
|
|
+CONFIG_VIRT_TO_BUS=y
|
|
+# CONFIG_TICK_ONESHOT is not set
|
|
+# CONFIG_NO_HZ is not set
|
|
+# CONFIG_HIGH_RES_TIMERS is not set
|
|
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
+# CONFIG_HZ_48 is not set
|
|
+CONFIG_HZ_100=y
|
|
+# CONFIG_HZ_128 is not set
|
|
+# CONFIG_HZ_250 is not set
|
|
+# CONFIG_HZ_256 is not set
|
|
+# CONFIG_HZ_1000 is not set
|
|
+# CONFIG_HZ_1024 is not set
|
|
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
|
+CONFIG_HZ=100
|
|
+# CONFIG_PREEMPT_NONE is not set
|
|
+# CONFIG_PREEMPT_VOLUNTARY is not set
|
|
+CONFIG_PREEMPT=y
|
|
+CONFIG_PREEMPT_BKL=y
|
|
+# CONFIG_KEXEC is not set
|
|
+CONFIG_SECCOMP=y
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
+
|
|
+#
|
|
+# General setup
|
|
+#
|
|
+CONFIG_EXPERIMENTAL=y
|
|
+CONFIG_BROKEN_ON_SMP=y
|
|
+CONFIG_LOCK_KERNEL=y
|
|
+CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
+CONFIG_LOCALVERSION=""
|
|
+CONFIG_LOCALVERSION_AUTO=y
|
|
+CONFIG_SWAP=y
|
|
+CONFIG_SYSVIPC=y
|
|
+CONFIG_SYSVIPC_SYSCTL=y
|
|
+# CONFIG_POSIX_MQUEUE is not set
|
|
+# CONFIG_BSD_PROCESS_ACCT is not set
|
|
+# CONFIG_TASKSTATS is not set
|
|
+# CONFIG_USER_NS is not set
|
|
+# CONFIG_PID_NS is not set
|
|
+# CONFIG_AUDIT is not set
|
|
+# CONFIG_IKCONFIG is not set
|
|
+CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_CGROUPS is not set
|
|
+CONFIG_FAIR_GROUP_SCHED=y
|
|
+CONFIG_FAIR_USER_SCHED=y
|
|
+# CONFIG_FAIR_CGROUP_SCHED is not set
|
|
+CONFIG_SYSFS_DEPRECATED=y
|
|
+CONFIG_RELAY=y
|
|
+# CONFIG_BLK_DEV_INITRD is not set
|
|
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
|
+CONFIG_SYSCTL=y
|
|
+CONFIG_EMBEDDED=y
|
|
+CONFIG_SYSCTL_SYSCALL=y
|
|
+CONFIG_KALLSYMS=y
|
|
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
|
+CONFIG_HOTPLUG=y
|
|
+CONFIG_PRINTK=y
|
|
+CONFIG_BUG=y
|
|
+CONFIG_ELF_CORE=y
|
|
+CONFIG_BASE_FULL=y
|
|
+CONFIG_FUTEX=y
|
|
+CONFIG_ANON_INODES=y
|
|
+CONFIG_EPOLL=y
|
|
+CONFIG_SIGNALFD=y
|
|
+CONFIG_EVENTFD=y
|
|
+CONFIG_SHMEM=y
|
|
+CONFIG_VM_EVENT_COUNTERS=y
|
|
+CONFIG_SLAB=y
|
|
+# CONFIG_SLUB is not set
|
|
+# CONFIG_SLOB is not set
|
|
+CONFIG_SLABINFO=y
|
|
+CONFIG_RT_MUTEXES=y
|
|
+# CONFIG_TINY_SHMEM is not set
|
|
+CONFIG_BASE_SMALL=0
|
|
+CONFIG_MODULES=y
|
|
+CONFIG_MODULE_UNLOAD=y
|
|
+# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
+CONFIG_MODVERSIONS=y
|
|
+CONFIG_MODULE_SRCVERSION_ALL=y
|
|
+CONFIG_KMOD=y
|
|
+CONFIG_BLOCK=y
|
|
+# CONFIG_LBD is not set
|
|
+# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
+# CONFIG_LSF is not set
|
|
+# CONFIG_BLK_DEV_BSG is not set
|
|
+
|
|
+#
|
|
+# IO Schedulers
|
|
+#
|
|
+CONFIG_IOSCHED_NOOP=y
|
|
+CONFIG_IOSCHED_AS=y
|
|
+CONFIG_IOSCHED_DEADLINE=y
|
|
+CONFIG_IOSCHED_CFQ=y
|
|
+CONFIG_DEFAULT_AS=y
|
|
+# CONFIG_DEFAULT_DEADLINE is not set
|
|
+# CONFIG_DEFAULT_CFQ is not set
|
|
+# CONFIG_DEFAULT_NOOP is not set
|
|
+CONFIG_DEFAULT_IOSCHED="anticipatory"
|
|
+
|
|
+#
|
|
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
|
|
+#
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
+CONFIG_MMU=y
|
|
+# CONFIG_PCCARD is not set
|
|
+
|
|
+#
|
|
+# Executable file formats
|
|
+#
|
|
+CONFIG_BINFMT_ELF=y
|
|
+# CONFIG_BINFMT_MISC is not set
|
|
+CONFIG_TRAD_SIGNALS=y
|
|
+
|
|
+#
|
|
+# CPU Frequency scaling
|
|
+#
|
|
+CONFIG_CPU_FREQ_JZ=y
|
|
+CONFIG_CPU_FREQ=y
|
|
+CONFIG_CPU_FREQ_TABLE=y
|
|
+# CONFIG_CPU_FREQ_DEBUG is not set
|
|
+CONFIG_CPU_FREQ_STAT=y
|
|
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
|
|
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
|
|
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
|
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
|
|
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
|
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
|
|
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
|
|
+
|
|
+#
|
|
+# Power management options
|
|
+#
|
|
+CONFIG_PM=y
|
|
+CONFIG_PM_LEGACY=y
|
|
+# CONFIG_PM_DEBUG is not set
|
|
+CONFIG_SUSPEND_UP_POSSIBLE=y
|
|
+# CONFIG_SUSPEND is not set
|
|
+
|
|
+#
|
|
+# Networking
|
|
+#
|
|
+CONFIG_NET=y
|
|
+
|
|
+#
|
|
+# Networking options
|
|
+#
|
|
+CONFIG_PACKET=y
|
|
+# CONFIG_PACKET_MMAP is not set
|
|
+CONFIG_UNIX=y
|
|
+# CONFIG_NET_KEY is not set
|
|
+CONFIG_INET=y
|
|
+# CONFIG_IP_MULTICAST is not set
|
|
+# CONFIG_IP_ADVANCED_ROUTER is not set
|
|
+CONFIG_IP_FIB_HASH=y
|
|
+CONFIG_IP_PNP=y
|
|
+CONFIG_IP_PNP_DHCP=y
|
|
+CONFIG_IP_PNP_BOOTP=y
|
|
+# CONFIG_IP_PNP_RARP is not set
|
|
+# CONFIG_NET_IPIP is not set
|
|
+# CONFIG_NET_IPGRE is not set
|
|
+# CONFIG_ARPD is not set
|
|
+# CONFIG_SYN_COOKIES is not set
|
|
+# CONFIG_INET_AH is not set
|
|
+# CONFIG_INET_ESP is not set
|
|
+# CONFIG_INET_IPCOMP is not set
|
|
+# CONFIG_INET_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
|
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_BEET is not set
|
|
+# CONFIG_INET_LRO is not set
|
|
+# CONFIG_INET_DIAG is not set
|
|
+# CONFIG_TCP_CONG_ADVANCED is not set
|
|
+CONFIG_TCP_CONG_CUBIC=y
|
|
+CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
+# CONFIG_TCP_MD5SIG is not set
|
|
+# CONFIG_IPV6 is not set
|
|
+# CONFIG_INET6_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET6_TUNNEL is not set
|
|
+# CONFIG_NETWORK_SECMARK is not set
|
|
+# CONFIG_NETFILTER is not set
|
|
+# CONFIG_IP_DCCP is not set
|
|
+# CONFIG_IP_SCTP is not set
|
|
+# CONFIG_TIPC is not set
|
|
+# CONFIG_ATM is not set
|
|
+# CONFIG_BRIDGE is not set
|
|
+# CONFIG_VLAN_8021Q is not set
|
|
+# CONFIG_DECNET is not set
|
|
+# CONFIG_LLC2 is not set
|
|
+# CONFIG_IPX is not set
|
|
+# CONFIG_ATALK is not set
|
|
+# CONFIG_X25 is not set
|
|
+# CONFIG_LAPB is not set
|
|
+# CONFIG_ECONET is not set
|
|
+# CONFIG_WAN_ROUTER is not set
|
|
+# CONFIG_NET_SCHED is not set
|
|
+
|
|
+#
|
|
+# Network testing
|
|
+#
|
|
+# CONFIG_NET_PKTGEN is not set
|
|
+# CONFIG_HAMRADIO is not set
|
|
+# CONFIG_IRDA is not set
|
|
+# CONFIG_BT is not set
|
|
+# CONFIG_AF_RXRPC is not set
|
|
+
|
|
+#
|
|
+# Wireless
|
|
+#
|
|
+# CONFIG_CFG80211 is not set
|
|
+CONFIG_WIRELESS_EXT=y
|
|
+# CONFIG_MAC80211 is not set
|
|
+# CONFIG_IEEE80211 is not set
|
|
+# CONFIG_RFKILL is not set
|
|
+# CONFIG_NET_9P is not set
|
|
+
|
|
+#
|
|
+# Device Drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# Generic Driver Options
|
|
+#
|
|
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
+CONFIG_STANDALONE=y
|
|
+CONFIG_PREVENT_FIRMWARE_BUILD=y
|
|
+# CONFIG_FW_LOADER is not set
|
|
+# CONFIG_SYS_HYPERVISOR is not set
|
|
+# CONFIG_CONNECTOR is not set
|
|
+CONFIG_MTD=y
|
|
+# CONFIG_MTD_DEBUG is not set
|
|
+# CONFIG_MTD_CONCAT is not set
|
|
+CONFIG_MTD_PARTITIONS=y
|
|
+# CONFIG_MTD_REDBOOT_PARTS is not set
|
|
+# CONFIG_MTD_CMDLINE_PARTS is not set
|
|
+
|
|
+#
|
|
+# User Modules And Translation Layers
|
|
+#
|
|
+CONFIG_MTD_CHAR=y
|
|
+CONFIG_MTD_BLKDEVS=y
|
|
+CONFIG_MTD_BLOCK=y
|
|
+# CONFIG_FTL is not set
|
|
+# CONFIG_NFTL is not set
|
|
+# CONFIG_INFTL is not set
|
|
+# CONFIG_RFD_FTL is not set
|
|
+# CONFIG_SSFDC is not set
|
|
+# CONFIG_MTD_OOPS is not set
|
|
+
|
|
+#
|
|
+# RAM/ROM/Flash chip drivers
|
|
+#
|
|
+# CONFIG_MTD_CFI is not set
|
|
+# CONFIG_MTD_JEDECPROBE is not set
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
|
+CONFIG_MTD_CFI_I1=y
|
|
+CONFIG_MTD_CFI_I2=y
|
|
+# CONFIG_MTD_CFI_I4 is not set
|
|
+# CONFIG_MTD_CFI_I8 is not set
|
|
+# CONFIG_MTD_RAM is not set
|
|
+# CONFIG_MTD_ROM is not set
|
|
+# CONFIG_MTD_ABSENT is not set
|
|
+
|
|
+#
|
|
+# Mapping drivers for chip access
|
|
+#
|
|
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
|
+# CONFIG_MTD_PLATRAM is not set
|
|
+
|
|
+#
|
|
+# Self-contained MTD device drivers
|
|
+#
|
|
+# CONFIG_MTD_SLRAM is not set
|
|
+# CONFIG_MTD_PHRAM is not set
|
|
+# CONFIG_MTD_MTDRAM is not set
|
|
+# CONFIG_MTD_BLOCK2MTD is not set
|
|
+
|
|
+#
|
|
+# Disk-On-Chip Device Drivers
|
|
+#
|
|
+# CONFIG_MTD_DOC2000 is not set
|
|
+# CONFIG_MTD_DOC2001 is not set
|
|
+# CONFIG_MTD_DOC2001PLUS is not set
|
|
+CONFIG_MTD_NAND=y
|
|
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
|
|
+# CONFIG_MTD_NAND_ECC_SMC is not set
|
|
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
|
|
+CONFIG_MTD_NAND_IDS=y
|
|
+# CONFIG_MTD_NAND_DISKONCHIP is not set
|
|
+# CONFIG_MTD_NAND_NANDSIM is not set
|
|
+# CONFIG_MTD_NAND_PLATFORM is not set
|
|
+# CONFIG_MTD_ALAUDA is not set
|
|
+CONFIG_MTD_NAND_JZ4740=y
|
|
+# CONFIG_MTD_HW_HM_ECC is not set
|
|
+# CONFIG_MTD_SW_HM_ECC is not set
|
|
+CONFIG_MTD_HW_RS_ECC=y
|
|
+# CONFIG_MTD_MTDBLOCK_WRITE_VERIFY_ENABLE is not set
|
|
+CONFIG_MTD_OOB_COPIES=3
|
|
+CONFIG_MTD_BADBLOCK_FLAG_PAGE=127
|
|
+# CONFIG_MTD_ONENAND is not set
|
|
+
|
|
+#
|
|
+# UBI - Unsorted block images
|
|
+#
|
|
+CONFIG_MTD_UBI=m
|
|
+CONFIG_MTD_UBI_WL_THRESHOLD=256
|
|
+CONFIG_MTD_UBI_BEB_RESERVE=1
|
|
+# CONFIG_MTD_UBI_GLUEBI is not set
|
|
+
|
|
+#
|
|
+# UBI debugging options
|
|
+#
|
|
+# CONFIG_MTD_UBI_DEBUG is not set
|
|
+CONFIG_MTD_UBI_BLKDEVS=m
|
|
+CONFIG_MTD_UBI_BLOCK=m
|
|
+# CONFIG_PARPORT is not set
|
|
+CONFIG_PNP=y
|
|
+# CONFIG_PNP_DEBUG is not set
|
|
+
|
|
+#
|
|
+# Protocols
|
|
+#
|
|
+# CONFIG_PNPACPI is not set
|
|
+CONFIG_BLK_DEV=y
|
|
+# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
+CONFIG_BLK_DEV_LOOP=y
|
|
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
|
+# CONFIG_BLK_DEV_NBD is not set
|
|
+# CONFIG_BLK_DEV_UB is not set
|
|
+CONFIG_BLK_DEV_RAM=y
|
|
+CONFIG_BLK_DEV_RAM_COUNT=2
|
|
+CONFIG_BLK_DEV_RAM_SIZE=4096
|
|
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
+# CONFIG_CDROM_PKTCDVD is not set
|
|
+# CONFIG_ATA_OVER_ETH is not set
|
|
+CONFIG_MISC_DEVICES=y
|
|
+# CONFIG_EEPROM_93CX6 is not set
|
|
+# CONFIG_IDE is not set
|
|
+
|
|
+#
|
|
+# SCSI device support
|
|
+#
|
|
+# CONFIG_RAID_ATTRS is not set
|
|
+CONFIG_SCSI=y
|
|
+CONFIG_SCSI_DMA=y
|
|
+# CONFIG_SCSI_TGT is not set
|
|
+# CONFIG_SCSI_NETLINK is not set
|
|
+CONFIG_SCSI_PROC_FS=y
|
|
+
|
|
+#
|
|
+# SCSI support type (disk, tape, CD-ROM)
|
|
+#
|
|
+CONFIG_BLK_DEV_SD=y
|
|
+# CONFIG_CHR_DEV_ST is not set
|
|
+# CONFIG_CHR_DEV_OSST is not set
|
|
+# CONFIG_BLK_DEV_SR is not set
|
|
+# CONFIG_CHR_DEV_SG is not set
|
|
+# CONFIG_CHR_DEV_SCH is not set
|
|
+
|
|
+#
|
|
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
|
+#
|
|
+# CONFIG_SCSI_MULTI_LUN is not set
|
|
+# CONFIG_SCSI_CONSTANTS is not set
|
|
+# CONFIG_SCSI_LOGGING is not set
|
|
+# CONFIG_SCSI_SCAN_ASYNC is not set
|
|
+CONFIG_SCSI_WAIT_SCAN=m
|
|
+
|
|
+#
|
|
+# SCSI Transports
|
|
+#
|
|
+# CONFIG_SCSI_SPI_ATTRS is not set
|
|
+# CONFIG_SCSI_FC_ATTRS is not set
|
|
+# CONFIG_SCSI_ISCSI_ATTRS is not set
|
|
+# CONFIG_SCSI_SAS_LIBSAS is not set
|
|
+# CONFIG_SCSI_SRP_ATTRS is not set
|
|
+CONFIG_SCSI_LOWLEVEL=y
|
|
+# CONFIG_ISCSI_TCP is not set
|
|
+# CONFIG_SCSI_DEBUG is not set
|
|
+# CONFIG_ATA is not set
|
|
+# CONFIG_MD is not set
|
|
+CONFIG_NETDEVICES=y
|
|
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
|
+# CONFIG_DUMMY is not set
|
|
+# CONFIG_BONDING is not set
|
|
+# CONFIG_MACVLAN is not set
|
|
+# CONFIG_EQUALIZER is not set
|
|
+# CONFIG_TUN is not set
|
|
+# CONFIG_VETH is not set
|
|
+# CONFIG_NET_SB1000 is not set
|
|
+CONFIG_PHYLIB=y
|
|
+
|
|
+#
|
|
+# MII PHY device drivers
|
|
+#
|
|
+# CONFIG_MARVELL_PHY is not set
|
|
+# CONFIG_DAVICOM_PHY is not set
|
|
+# CONFIG_QSEMI_PHY is not set
|
|
+# CONFIG_LXT_PHY is not set
|
|
+# CONFIG_CICADA_PHY is not set
|
|
+# CONFIG_VITESSE_PHY is not set
|
|
+# CONFIG_SMSC_PHY is not set
|
|
+# CONFIG_BROADCOM_PHY is not set
|
|
+# CONFIG_ICPLUS_PHY is not set
|
|
+# CONFIG_FIXED_PHY is not set
|
|
+# CONFIG_MDIO_BITBANG is not set
|
|
+CONFIG_NET_ETHERNET=y
|
|
+CONFIG_MII=y
|
|
+CONFIG_JZCS8900=y
|
|
+# CONFIG_AX88796 is not set
|
|
+# CONFIG_DM9000 is not set
|
|
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_TAH is not set
|
|
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
|
+# CONFIG_B44 is not set
|
|
+# CONFIG_NETDEV_1000 is not set
|
|
+# CONFIG_NETDEV_10000 is not set
|
|
+
|
|
+#
|
|
+# Wireless LAN
|
|
+#
|
|
+# CONFIG_WLAN_PRE80211 is not set
|
|
+# CONFIG_WLAN_80211 is not set
|
|
+
|
|
+#
|
|
+# USB Network Adapters
|
|
+#
|
|
+# CONFIG_USB_CATC is not set
|
|
+# CONFIG_USB_KAWETH is not set
|
|
+# CONFIG_USB_PEGASUS is not set
|
|
+# CONFIG_USB_RTL8150 is not set
|
|
+# CONFIG_USB_USBNET is not set
|
|
+# CONFIG_WAN is not set
|
|
+# CONFIG_PPP is not set
|
|
+# CONFIG_SLIP is not set
|
|
+# CONFIG_SHAPER is not set
|
|
+# CONFIG_NETCONSOLE is not set
|
|
+# CONFIG_NETPOLL is not set
|
|
+# CONFIG_NET_POLL_CONTROLLER is not set
|
|
+# CONFIG_ISDN is not set
|
|
+# CONFIG_PHONE is not set
|
|
+
|
|
+#
|
|
+# Input device support
|
|
+#
|
|
+CONFIG_INPUT=y
|
|
+# CONFIG_INPUT_FF_MEMLESS is not set
|
|
+# CONFIG_INPUT_POLLDEV is not set
|
|
+
|
|
+#
|
|
+# Userland interfaces
|
|
+#
|
|
+CONFIG_INPUT_MOUSEDEV=y
|
|
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
|
+# CONFIG_INPUT_JOYDEV is not set
|
|
+CONFIG_INPUT_EVDEV=y
|
|
+# CONFIG_INPUT_EVBUG is not set
|
|
+
|
|
+#
|
|
+# Input Device Drivers
|
|
+#
|
|
+# CONFIG_INPUT_KEYBOARD is not set
|
|
+# CONFIG_INPUT_MOUSE is not set
|
|
+# CONFIG_INPUT_JOYSTICK is not set
|
|
+# CONFIG_INPUT_TABLET is not set
|
|
+# CONFIG_INPUT_TOUCHSCREEN is not set
|
|
+# CONFIG_INPUT_MISC is not set
|
|
+
|
|
+#
|
|
+# Hardware I/O ports
|
|
+#
|
|
+CONFIG_SERIO=y
|
|
+# CONFIG_SERIO_I8042 is not set
|
|
+CONFIG_SERIO_SERPORT=y
|
|
+# CONFIG_SERIO_LIBPS2 is not set
|
|
+# CONFIG_SERIO_RAW is not set
|
|
+# CONFIG_GAMEPORT is not set
|
|
+
|
|
+#
|
|
+# Character devices
|
|
+#
|
|
+CONFIG_VT=y
|
|
+CONFIG_VT_CONSOLE=y
|
|
+CONFIG_HW_CONSOLE=y
|
|
+CONFIG_VT_HW_CONSOLE_BINDING=y
|
|
+# CONFIG_SERIAL_NONSTANDARD is not set
|
|
+
|
|
+#
|
|
+# Serial drivers
|
|
+#
|
|
+CONFIG_SERIAL_8250=y
|
|
+CONFIG_SERIAL_8250_CONSOLE=y
|
|
+CONFIG_SERIAL_8250_PNP=y
|
|
+CONFIG_SERIAL_8250_NR_UARTS=2
|
|
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
|
|
+# CONFIG_SERIAL_8250_EXTENDED is not set
|
|
+
|
|
+#
|
|
+# Non-8250 serial port support
|
|
+#
|
|
+CONFIG_SERIAL_CORE=y
|
|
+CONFIG_SERIAL_CORE_CONSOLE=y
|
|
+CONFIG_UNIX98_PTYS=y
|
|
+CONFIG_LEGACY_PTYS=y
|
|
+CONFIG_LEGACY_PTY_COUNT=2
|
|
+# CONFIG_IPMI_HANDLER is not set
|
|
+# CONFIG_HW_RANDOM is not set
|
|
+# CONFIG_RTC is not set
|
|
+# CONFIG_RTC_PCF8563 is not set
|
|
+CONFIG_RTC_JZ=y
|
|
+# CONFIG_R3964 is not set
|
|
+# CONFIG_RAW_DRIVER is not set
|
|
+# CONFIG_TCG_TPM is not set
|
|
+
|
|
+#
|
|
+# JZSOC char device support
|
|
+#
|
|
+CONFIG_JZCHAR=y
|
|
+# CONFIG_JZ_CIM is not set
|
|
+# CONFIG_JZ_TPANEL_ATA2508 is not set
|
|
+CONFIG_JZ_TPANEL=y
|
|
+CONFIG_JZ_SADC=y
|
|
+# CONFIG_JZ_TPANEL_AK4182 is not set
|
|
+# CONFIG_JZ_TPANEL_UCB1400 is not set
|
|
+# CONFIG_JZ_TPANEL_WM9712 is not set
|
|
+CONFIG_JZ_UDC_HOTPLUG=y
|
|
+CONFIG_JZ_POWEROFF=y
|
|
+# CONFIG_JZ_OW is not set
|
|
+# CONFIG_I2C is not set
|
|
+
|
|
+#
|
|
+# SPI support
|
|
+#
|
|
+# CONFIG_SPI is not set
|
|
+# CONFIG_SPI_MASTER is not set
|
|
+# CONFIG_W1 is not set
|
|
+# CONFIG_POWER_SUPPLY is not set
|
|
+# CONFIG_HWMON is not set
|
|
+CONFIG_WATCHDOG=y
|
|
+# CONFIG_WATCHDOG_NOWAYOUT is not set
|
|
+
|
|
+#
|
|
+# Watchdog Device Drivers
|
|
+#
|
|
+CONFIG_JZ_WDT=y
|
|
+# CONFIG_SOFT_WATCHDOG is not set
|
|
+
|
|
+#
|
|
+# USB-based Watchdog Cards
|
|
+#
|
|
+# CONFIG_USBPCWATCHDOG is not set
|
|
+
|
|
+#
|
|
+# Sonics Silicon Backplane
|
|
+#
|
|
+CONFIG_SSB_POSSIBLE=y
|
|
+# CONFIG_SSB is not set
|
|
+
|
|
+#
|
|
+# Multifunction device drivers
|
|
+#
|
|
+# CONFIG_MFD_SM501 is not set
|
|
+
|
|
+#
|
|
+# Multimedia devices
|
|
+#
|
|
+CONFIG_VIDEO_DEV=y
|
|
+CONFIG_VIDEO_V4L1=y
|
|
+CONFIG_VIDEO_V4L1_COMPAT=y
|
|
+CONFIG_VIDEO_V4L2=y
|
|
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
|
|
+# CONFIG_VIDEO_ADV_DEBUG is not set
|
|
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
|
|
+# CONFIG_VIDEO_VIVI is not set
|
|
+# CONFIG_VIDEO_CPIA is not set
|
|
+# CONFIG_VIDEO_CPIA2 is not set
|
|
+CONFIG_VIDEO_JZ_CIM=y
|
|
+CONFIG_VIDEO_JZ_SENSOR=y
|
|
+CONFIG_V4L_USB_DRIVERS=y
|
|
+# CONFIG_USB_VICAM is not set
|
|
+# CONFIG_USB_IBMCAM is not set
|
|
+# CONFIG_USB_KONICAWC is not set
|
|
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
|
|
+# CONFIG_USB_ET61X251 is not set
|
|
+# CONFIG_USB_OV511 is not set
|
|
+# CONFIG_USB_SE401 is not set
|
|
+# CONFIG_USB_SN9C102 is not set
|
|
+# CONFIG_USB_STV680 is not set
|
|
+# CONFIG_USB_ZC0301 is not set
|
|
+# CONFIG_USB_PWC is not set
|
|
+# CONFIG_USB_ZR364XX is not set
|
|
+CONFIG_RADIO_ADAPTERS=y
|
|
+# CONFIG_USB_DSBR is not set
|
|
+# CONFIG_DVB_CORE is not set
|
|
+# CONFIG_DAB is not set
|
|
+
|
|
+#
|
|
+# Graphics support
|
|
+#
|
|
+# CONFIG_VGASTATE is not set
|
|
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
|
+CONFIG_FB=y
|
|
+# CONFIG_FIRMWARE_EDID is not set
|
|
+# CONFIG_FB_DDC is not set
|
|
+CONFIG_FB_CFB_FILLRECT=y
|
|
+CONFIG_FB_CFB_COPYAREA=y
|
|
+CONFIG_FB_CFB_IMAGEBLIT=y
|
|
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
|
|
+# CONFIG_FB_SYS_FILLRECT is not set
|
|
+# CONFIG_FB_SYS_COPYAREA is not set
|
|
+# CONFIG_FB_SYS_IMAGEBLIT is not set
|
|
+# CONFIG_FB_SYS_FOPS is not set
|
|
+CONFIG_FB_DEFERRED_IO=y
|
|
+# CONFIG_FB_SVGALIB is not set
|
|
+# CONFIG_FB_MACMODES is not set
|
|
+# CONFIG_FB_BACKLIGHT is not set
|
|
+# CONFIG_FB_MODE_HELPERS is not set
|
|
+# CONFIG_FB_TILEBLITTING is not set
|
|
+
|
|
+#
|
|
+# Frame buffer hardware drivers
|
|
+#
|
|
+CONFIG_FB_JZSOC=y
|
|
+# CONFIG_FB_JZ4740_SLCD is not set
|
|
+CONFIG_FB_JZLCD_4730_4740=y
|
|
+CONFIG_JZLCD_FRAMEBUFFER_MAX=1
|
|
+# CONFIG_JZLCD_FRAMEBUFFER_ROTATE_SUPPORT is not set
|
|
+# CONFIG_JZLCD_SHARP_LQ035Q7 is not set
|
|
+# CONFIG_JZLCD_SAMSUNG_LTS350Q1 is not set
|
|
+# CONFIG_JZLCD_SAMSUNG_LTV350QVF04 is not set
|
|
+# CONFIG_JZLCD_SAMSUNG_LTP400WQF01 is not set
|
|
+CONFIG_JZLCD_SAMSUNG_LTP400WQF02=y
|
|
+# CONFIG_JZLCD_AUO_A030FL01_V1 is not set
|
|
+# CONFIG_JZLCD_TRULY_TFTG320240DTSW is not set
|
|
+# CONFIG_JZLCD_TRULY_TFTG320240DTSW_SERIAL is not set
|
|
+# CONFIG_JZLCD_TRULY_TFTG240320UTSW_63W_E is not set
|
|
+# CONFIG_JZLCD_FOXCONN_PT035TN01 is not set
|
|
+# CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL is not set
|
|
+# CONFIG_JZLCD_TOSHIBA_LTM084P363 is not set
|
|
+# CONFIG_JZLCD_HYNIX_HT10X21 is not set
|
|
+# CONFIG_JZLCD_INNOLUX_AT080TN42 is not set
|
|
+# CONFIG_JZLCD_CSTN_800x600 is not set
|
|
+# CONFIG_JZLCD_CSTN_320x240 is not set
|
|
+# CONFIG_JZLCD_MSTN_480x320 is not set
|
|
+# CONFIG_JZLCD_MSTN_320x240 is not set
|
|
+# CONFIG_JZLCD_MSTN_240x128 is not set
|
|
+# CONFIG_FB_S1D13XXX is not set
|
|
+# CONFIG_FB_VIRTUAL is not set
|
|
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Display device support
|
|
+#
|
|
+# CONFIG_DISPLAY_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Console display driver support
|
|
+#
|
|
+# CONFIG_VGA_CONSOLE is not set
|
|
+CONFIG_DUMMY_CONSOLE=y
|
|
+CONFIG_FRAMEBUFFER_CONSOLE=y
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE_CURSOR_FLASH is not set
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
|
|
+CONFIG_FONTS=y
|
|
+CONFIG_FONT_8x8=y
|
|
+CONFIG_FONT_8x16=y
|
|
+# CONFIG_FONT_6x11 is not set
|
|
+# CONFIG_FONT_7x14 is not set
|
|
+# CONFIG_FONT_PEARL_8x8 is not set
|
|
+# CONFIG_FONT_ACORN_8x8 is not set
|
|
+# CONFIG_FONT_MINI_4x6 is not set
|
|
+# CONFIG_FONT_SUN8x16 is not set
|
|
+# CONFIG_FONT_SUN12x22 is not set
|
|
+# CONFIG_FONT_10x18 is not set
|
|
+CONFIG_LOGO=y
|
|
+CONFIG_LOGO_LINUX_MONO=y
|
|
+CONFIG_LOGO_LINUX_VGA16=y
|
|
+CONFIG_LOGO_LINUX_CLUT224=y
|
|
+
|
|
+#
|
|
+# Sound
|
|
+#
|
|
+CONFIG_SOUND=y
|
|
+
|
|
+#
|
|
+# Advanced Linux Sound Architecture
|
|
+#
|
|
+# CONFIG_SND is not set
|
|
+
|
|
+#
|
|
+# Open Sound System
|
|
+#
|
|
+CONFIG_SOUND_PRIME=y
|
|
+CONFIG_OSS_OBSOLETE=y
|
|
+# CONFIG_SOUND_JZ_AC97 is not set
|
|
+CONFIG_SOUND_JZ_I2S=y
|
|
+# CONFIG_SOUND_JZ_PCM is not set
|
|
+# CONFIG_I2S_AK4642EN is not set
|
|
+CONFIG_I2S_ICODEC=y
|
|
+# CONFIG_SOUND_MSNDCLAS is not set
|
|
+# CONFIG_SOUND_MSNDPIN is not set
|
|
+CONFIG_HID_SUPPORT=y
|
|
+CONFIG_HID=y
|
|
+# CONFIG_HID_DEBUG is not set
|
|
+# CONFIG_HIDRAW is not set
|
|
+
|
|
+#
|
|
+# USB Input Devices
|
|
+#
|
|
+CONFIG_USB_HID=y
|
|
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
|
|
+# CONFIG_HID_FF is not set
|
|
+# CONFIG_USB_HIDDEV is not set
|
|
+CONFIG_USB_SUPPORT=y
|
|
+CONFIG_USB_ARCH_HAS_HCD=y
|
|
+CONFIG_USB_ARCH_HAS_OHCI=y
|
|
+# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
+CONFIG_USB=y
|
|
+# CONFIG_USB_DEBUG is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous USB options
|
|
+#
|
|
+# CONFIG_USB_DEVICEFS is not set
|
|
+CONFIG_USB_DEVICE_CLASS=y
|
|
+# CONFIG_USB_DYNAMIC_MINORS is not set
|
|
+# CONFIG_USB_SUSPEND is not set
|
|
+# CONFIG_USB_PERSIST is not set
|
|
+# CONFIG_USB_OTG is not set
|
|
+
|
|
+#
|
|
+# USB Host Controller Drivers
|
|
+#
|
|
+# CONFIG_USB_ISP116X_HCD is not set
|
|
+CONFIG_USB_OHCI_HCD=y
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
|
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
|
+# CONFIG_USB_SL811_HCD is not set
|
|
+# CONFIG_USB_R8A66597_HCD is not set
|
|
+
|
|
+#
|
|
+# USB Device Class drivers
|
|
+#
|
|
+# CONFIG_USB_ACM is not set
|
|
+# CONFIG_USB_PRINTER is not set
|
|
+
|
|
+#
|
|
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
+#
|
|
+
|
|
+#
|
|
+# may also be needed; see USB_STORAGE Help for more information
|
|
+#
|
|
+CONFIG_USB_STORAGE=y
|
|
+# CONFIG_USB_STORAGE_DEBUG is not set
|
|
+# CONFIG_USB_STORAGE_DATAFAB is not set
|
|
+# CONFIG_USB_STORAGE_FREECOM is not set
|
|
+# CONFIG_USB_STORAGE_ISD200 is not set
|
|
+# CONFIG_USB_STORAGE_DPCM is not set
|
|
+# CONFIG_USB_STORAGE_USBAT is not set
|
|
+# CONFIG_USB_STORAGE_SDDR09 is not set
|
|
+# CONFIG_USB_STORAGE_SDDR55 is not set
|
|
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
|
|
+# CONFIG_USB_STORAGE_ALAUDA is not set
|
|
+# CONFIG_USB_STORAGE_KARMA is not set
|
|
+# CONFIG_USB_LIBUSUAL is not set
|
|
+
|
|
+#
|
|
+# USB Imaging devices
|
|
+#
|
|
+# CONFIG_USB_MDC800 is not set
|
|
+# CONFIG_USB_MICROTEK is not set
|
|
+CONFIG_USB_MON=y
|
|
+
|
|
+#
|
|
+# USB port drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Serial Converter support
|
|
+#
|
|
+# CONFIG_USB_SERIAL is not set
|
|
+
|
|
+#
|
|
+# USB Miscellaneous drivers
|
|
+#
|
|
+# CONFIG_USB_EMI62 is not set
|
|
+# CONFIG_USB_EMI26 is not set
|
|
+# CONFIG_USB_ADUTUX is not set
|
|
+# CONFIG_USB_AUERSWALD is not set
|
|
+# CONFIG_USB_RIO500 is not set
|
|
+# CONFIG_USB_LEGOTOWER is not set
|
|
+# CONFIG_USB_LCD is not set
|
|
+# CONFIG_USB_BERRY_CHARGE is not set
|
|
+# CONFIG_USB_LED is not set
|
|
+# CONFIG_USB_CYPRESS_CY7C63 is not set
|
|
+# CONFIG_USB_CYTHERM is not set
|
|
+# CONFIG_USB_PHIDGET is not set
|
|
+# CONFIG_USB_IDMOUSE is not set
|
|
+# CONFIG_USB_FTDI_ELAN is not set
|
|
+# CONFIG_USB_APPLEDISPLAY is not set
|
|
+# CONFIG_USB_LD is not set
|
|
+# CONFIG_USB_TRANCEVIBRATOR is not set
|
|
+# CONFIG_USB_IOWARRIOR is not set
|
|
+
|
|
+#
|
|
+# USB DSL modem support
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Gadget Support
|
|
+#
|
|
+CONFIG_USB_GADGET=m
|
|
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
|
+# CONFIG_USB_GADGET_DEBUG_FS is not set
|
|
+CONFIG_USB_GADGET_SELECTED=y
|
|
+CONFIG_USB_GADGET_JZ4740=y
|
|
+CONFIG_USB_JZ4740=m
|
|
+# CONFIG_USB_GADGET_JZ4730 is not set
|
|
+# CONFIG_USB_GADGET_AMD5536UDC is not set
|
|
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
|
|
+# CONFIG_USB_GADGET_FSL_USB2 is not set
|
|
+# CONFIG_USB_GADGET_NET2280 is not set
|
|
+# CONFIG_USB_GADGET_PXA2XX is not set
|
|
+# CONFIG_USB_GADGET_M66592 is not set
|
|
+# CONFIG_USB_GADGET_GOKU is not set
|
|
+# CONFIG_USB_GADGET_LH7A40X is not set
|
|
+# CONFIG_USB_GADGET_OMAP is not set
|
|
+# CONFIG_USB_GADGET_S3C2410 is not set
|
|
+# CONFIG_USB_GADGET_AT91 is not set
|
|
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
|
|
+CONFIG_USB_GADGET_DUALSPEED=y
|
|
+# CONFIG_USB_ZERO is not set
|
|
+# CONFIG_USB_ETH is not set
|
|
+# CONFIG_USB_GADGETFS is not set
|
|
+CONFIG_USB_FILE_STORAGE=m
|
|
+# CONFIG_USB_FILE_STORAGE_TEST is not set
|
|
+# CONFIG_USB_G_SERIAL is not set
|
|
+# CONFIG_USB_MIDI_GADGET is not set
|
|
+CONFIG_MMC=y
|
|
+# CONFIG_MMC_DEBUG is not set
|
|
+# CONFIG_MMC_UNSAFE_RESUME is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Card Drivers
|
|
+#
|
|
+CONFIG_MMC_BLOCK=y
|
|
+CONFIG_MMC_BLOCK_BOUNCE=y
|
|
+# CONFIG_SDIO_UART is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Host Controller Drivers
|
|
+#
|
|
+CONFIG_MMC_JZ=y
|
|
+CONFIG_JZ_MMC_BUS_4=y
|
|
+# CONFIG_JZ_MMC_BUS_1 is not set
|
|
+# CONFIG_NEW_LEDS is not set
|
|
+CONFIG_RTC_LIB=y
|
|
+# CONFIG_RTC_CLASS is not set
|
|
+
|
|
+#
|
|
+# Userspace I/O
|
|
+#
|
|
+# CONFIG_UIO is not set
|
|
+
|
|
+#
|
|
+# File systems
|
|
+#
|
|
+CONFIG_EXT2_FS=y
|
|
+CONFIG_EXT2_FS_XATTR=y
|
|
+# CONFIG_EXT2_FS_POSIX_ACL is not set
|
|
+# CONFIG_EXT2_FS_SECURITY is not set
|
|
+# CONFIG_EXT2_FS_XIP is not set
|
|
+# CONFIG_EXT3_FS is not set
|
|
+# CONFIG_EXT4DEV_FS is not set
|
|
+CONFIG_FS_MBCACHE=y
|
|
+# CONFIG_REISERFS_FS is not set
|
|
+# CONFIG_JFS_FS is not set
|
|
+CONFIG_FS_POSIX_ACL=y
|
|
+# CONFIG_XFS_FS is not set
|
|
+# CONFIG_GFS2_FS is not set
|
|
+# CONFIG_OCFS2_FS is not set
|
|
+CONFIG_MINIX_FS=y
|
|
+# CONFIG_ROMFS_FS is not set
|
|
+CONFIG_INOTIFY=y
|
|
+CONFIG_INOTIFY_USER=y
|
|
+# CONFIG_QUOTA is not set
|
|
+CONFIG_DNOTIFY=y
|
|
+# CONFIG_AUTOFS_FS is not set
|
|
+# CONFIG_AUTOFS4_FS is not set
|
|
+# CONFIG_FUSE_FS is not set
|
|
+
|
|
+#
|
|
+# CD-ROM/DVD Filesystems
|
|
+#
|
|
+# CONFIG_ISO9660_FS is not set
|
|
+# CONFIG_UDF_FS is not set
|
|
+
|
|
+#
|
|
+# DOS/FAT/NT Filesystems
|
|
+#
|
|
+CONFIG_FAT_FS=y
|
|
+CONFIG_MSDOS_FS=y
|
|
+CONFIG_VFAT_FS=y
|
|
+CONFIG_FAT_DEFAULT_CODEPAGE=437
|
|
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
|
+# CONFIG_NTFS_FS is not set
|
|
+
|
|
+#
|
|
+# Pseudo filesystems
|
|
+#
|
|
+CONFIG_PROC_FS=y
|
|
+CONFIG_PROC_KCORE=y
|
|
+CONFIG_PROC_SYSCTL=y
|
|
+CONFIG_SYSFS=y
|
|
+CONFIG_TMPFS=y
|
|
+# CONFIG_TMPFS_POSIX_ACL is not set
|
|
+# CONFIG_HUGETLB_PAGE is not set
|
|
+# CONFIG_CONFIGFS_FS is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous filesystems
|
|
+#
|
|
+# CONFIG_ADFS_FS is not set
|
|
+# CONFIG_AFFS_FS is not set
|
|
+# CONFIG_HFS_FS is not set
|
|
+# CONFIG_HFSPLUS_FS is not set
|
|
+# CONFIG_BEFS_FS is not set
|
|
+# CONFIG_BFS_FS is not set
|
|
+# CONFIG_EFS_FS is not set
|
|
+# CONFIG_JFFS2_FS is not set
|
|
+CONFIG_UBIFS_FS=m
|
|
+# CONFIG_UBIFS_FS_XATTR is not set
|
|
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
|
|
+CONFIG_UBIFS_FS_LZO=y
|
|
+CONFIG_UBIFS_FS_ZLIB=y
|
|
+# CONFIG_UBIFS_FS_DEBUG is not set
|
|
+# CONFIG_CRAMFS is not set
|
|
+# CONFIG_VXFS_FS is not set
|
|
+# CONFIG_HPFS_FS is not set
|
|
+# CONFIG_QNX4FS_FS is not set
|
|
+# CONFIG_SYSV_FS is not set
|
|
+# CONFIG_UFS_FS is not set
|
|
+CONFIG_NETWORK_FILESYSTEMS=y
|
|
+CONFIG_NFS_FS=y
|
|
+CONFIG_NFS_V3=y
|
|
+CONFIG_NFS_V3_ACL=y
|
|
+CONFIG_NFS_V4=y
|
|
+CONFIG_NFS_DIRECTIO=y
|
|
+# CONFIG_NFSD is not set
|
|
+CONFIG_ROOT_NFS=y
|
|
+CONFIG_LOCKD=y
|
|
+CONFIG_LOCKD_V4=y
|
|
+CONFIG_NFS_ACL_SUPPORT=y
|
|
+CONFIG_NFS_COMMON=y
|
|
+CONFIG_SUNRPC=y
|
|
+CONFIG_SUNRPC_GSS=y
|
|
+# CONFIG_SUNRPC_BIND34 is not set
|
|
+CONFIG_RPCSEC_GSS_KRB5=y
|
|
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
|
+# CONFIG_SMB_FS is not set
|
|
+# CONFIG_CIFS is not set
|
|
+# CONFIG_NCP_FS is not set
|
|
+# CONFIG_CODA_FS is not set
|
|
+# CONFIG_AFS_FS is not set
|
|
+
|
|
+#
|
|
+# Partition Types
|
|
+#
|
|
+CONFIG_PARTITION_ADVANCED=y
|
|
+# CONFIG_ACORN_PARTITION is not set
|
|
+# CONFIG_OSF_PARTITION is not set
|
|
+# CONFIG_AMIGA_PARTITION is not set
|
|
+# CONFIG_ATARI_PARTITION is not set
|
|
+# CONFIG_MAC_PARTITION is not set
|
|
+CONFIG_MSDOS_PARTITION=y
|
|
+# CONFIG_BSD_DISKLABEL is not set
|
|
+# CONFIG_MINIX_SUBPARTITION is not set
|
|
+# CONFIG_SOLARIS_X86_PARTITION is not set
|
|
+# CONFIG_UNIXWARE_DISKLABEL is not set
|
|
+# CONFIG_LDM_PARTITION is not set
|
|
+# CONFIG_SGI_PARTITION is not set
|
|
+# CONFIG_ULTRIX_PARTITION is not set
|
|
+# CONFIG_SUN_PARTITION is not set
|
|
+# CONFIG_KARMA_PARTITION is not set
|
|
+# CONFIG_EFI_PARTITION is not set
|
|
+# CONFIG_SYSV68_PARTITION is not set
|
|
+CONFIG_NLS=y
|
|
+CONFIG_NLS_DEFAULT="iso8859-1"
|
|
+CONFIG_NLS_CODEPAGE_437=y
|
|
+# CONFIG_NLS_CODEPAGE_737 is not set
|
|
+# CONFIG_NLS_CODEPAGE_775 is not set
|
|
+# CONFIG_NLS_CODEPAGE_850 is not set
|
|
+# CONFIG_NLS_CODEPAGE_852 is not set
|
|
+# CONFIG_NLS_CODEPAGE_855 is not set
|
|
+# CONFIG_NLS_CODEPAGE_857 is not set
|
|
+# CONFIG_NLS_CODEPAGE_860 is not set
|
|
+# CONFIG_NLS_CODEPAGE_861 is not set
|
|
+# CONFIG_NLS_CODEPAGE_862 is not set
|
|
+# CONFIG_NLS_CODEPAGE_863 is not set
|
|
+# CONFIG_NLS_CODEPAGE_864 is not set
|
|
+# CONFIG_NLS_CODEPAGE_865 is not set
|
|
+# CONFIG_NLS_CODEPAGE_866 is not set
|
|
+# CONFIG_NLS_CODEPAGE_869 is not set
|
|
+CONFIG_NLS_CODEPAGE_936=y
|
|
+# CONFIG_NLS_CODEPAGE_950 is not set
|
|
+# CONFIG_NLS_CODEPAGE_932 is not set
|
|
+# CONFIG_NLS_CODEPAGE_949 is not set
|
|
+# CONFIG_NLS_CODEPAGE_874 is not set
|
|
+# CONFIG_NLS_ISO8859_8 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1250 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1251 is not set
|
|
+CONFIG_NLS_ASCII=y
|
|
+CONFIG_NLS_ISO8859_1=y
|
|
+# CONFIG_NLS_ISO8859_2 is not set
|
|
+# CONFIG_NLS_ISO8859_3 is not set
|
|
+# CONFIG_NLS_ISO8859_4 is not set
|
|
+# CONFIG_NLS_ISO8859_5 is not set
|
|
+# CONFIG_NLS_ISO8859_6 is not set
|
|
+# CONFIG_NLS_ISO8859_7 is not set
|
|
+# CONFIG_NLS_ISO8859_9 is not set
|
|
+# CONFIG_NLS_ISO8859_13 is not set
|
|
+# CONFIG_NLS_ISO8859_14 is not set
|
|
+# CONFIG_NLS_ISO8859_15 is not set
|
|
+# CONFIG_NLS_KOI8_R is not set
|
|
+# CONFIG_NLS_KOI8_U is not set
|
|
+# CONFIG_NLS_UTF8 is not set
|
|
+# CONFIG_DLM is not set
|
|
+
|
|
+#
|
|
+# Yaffs2 Filesystems
|
|
+#
|
|
+CONFIG_YAFFS_FS=y
|
|
+CONFIG_YAFFS_YAFFS1=y
|
|
+# CONFIG_YAFFS_DOES_ECC is not set
|
|
+CONFIG_YAFFS_YAFFS2=y
|
|
+CONFIG_YAFFS_AUTO_YAFFS2=y
|
|
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
|
|
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
|
|
+CONFIG_YAFFS_DISABLE_CHUNK_ERASED_CHECK=y
|
|
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
|
|
+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
|
|
+CONFIG_INSTRUMENTATION=y
|
|
+# CONFIG_PROFILING is not set
|
|
+# CONFIG_MARKERS is not set
|
|
+
|
|
+#
|
|
+# Kernel hacking
|
|
+#
|
|
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
+# CONFIG_PRINTK_TIME is not set
|
|
+CONFIG_ENABLE_WARN_DEPRECATED=y
|
|
+CONFIG_ENABLE_MUST_CHECK=y
|
|
+CONFIG_MAGIC_SYSRQ=y
|
|
+# CONFIG_UNUSED_SYMBOLS is not set
|
|
+CONFIG_DEBUG_FS=y
|
|
+# CONFIG_HEADERS_CHECK is not set
|
|
+# CONFIG_DEBUG_KERNEL is not set
|
|
+# CONFIG_SAMPLES is not set
|
|
+CONFIG_CMDLINE=""
|
|
+
|
|
+#
|
|
+# Security options
|
|
+#
|
|
+# CONFIG_KEYS is not set
|
|
+# CONFIG_SECURITY is not set
|
|
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
|
+CONFIG_CRYPTO=y
|
|
+CONFIG_CRYPTO_ALGAPI=y
|
|
+CONFIG_CRYPTO_BLKCIPHER=y
|
|
+CONFIG_CRYPTO_MANAGER=y
|
|
+# CONFIG_CRYPTO_HMAC is not set
|
|
+# CONFIG_CRYPTO_XCBC is not set
|
|
+# CONFIG_CRYPTO_NULL is not set
|
|
+# CONFIG_CRYPTO_MD4 is not set
|
|
+CONFIG_CRYPTO_MD5=y
|
|
+# CONFIG_CRYPTO_SHA1 is not set
|
|
+# CONFIG_CRYPTO_SHA256 is not set
|
|
+# CONFIG_CRYPTO_SHA512 is not set
|
|
+# CONFIG_CRYPTO_WP512 is not set
|
|
+# CONFIG_CRYPTO_TGR192 is not set
|
|
+# CONFIG_CRYPTO_GF128MUL is not set
|
|
+# CONFIG_CRYPTO_ECB is not set
|
|
+CONFIG_CRYPTO_CBC=y
|
|
+# CONFIG_CRYPTO_PCBC is not set
|
|
+# CONFIG_CRYPTO_LRW is not set
|
|
+# CONFIG_CRYPTO_XTS is not set
|
|
+# CONFIG_CRYPTO_CRYPTD is not set
|
|
+CONFIG_CRYPTO_DES=y
|
|
+# CONFIG_CRYPTO_FCRYPT is not set
|
|
+# CONFIG_CRYPTO_BLOWFISH is not set
|
|
+# CONFIG_CRYPTO_TWOFISH is not set
|
|
+# CONFIG_CRYPTO_SERPENT is not set
|
|
+# CONFIG_CRYPTO_AES is not set
|
|
+# CONFIG_CRYPTO_CAST5 is not set
|
|
+# CONFIG_CRYPTO_CAST6 is not set
|
|
+# CONFIG_CRYPTO_TEA is not set
|
|
+# CONFIG_CRYPTO_ARC4 is not set
|
|
+# CONFIG_CRYPTO_KHAZAD is not set
|
|
+# CONFIG_CRYPTO_ANUBIS is not set
|
|
+# CONFIG_CRYPTO_SEED is not set
|
|
+CONFIG_CRYPTO_DEFLATE=m
|
|
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
|
|
+# CONFIG_CRYPTO_CRC32C is not set
|
|
+# CONFIG_CRYPTO_CAMELLIA is not set
|
|
+# CONFIG_CRYPTO_TEST is not set
|
|
+# CONFIG_CRYPTO_AUTHENC is not set
|
|
+CONFIG_CRYPTO_LZO=m
|
|
+CONFIG_CRYPTO_HW=y
|
|
+
|
|
+#
|
|
+# Library routines
|
|
+#
|
|
+CONFIG_BITREVERSE=y
|
|
+# CONFIG_CRC_CCITT is not set
|
|
+CONFIG_CRC16=m
|
|
+# CONFIG_CRC_ITU_T is not set
|
|
+CONFIG_CRC32=y
|
|
+# CONFIG_CRC7 is not set
|
|
+# CONFIG_LIBCRC32C is not set
|
|
+CONFIG_ZLIB_INFLATE=m
|
|
+CONFIG_ZLIB_DEFLATE=m
|
|
+CONFIG_LZO_COMPRESS=m
|
|
+CONFIG_LZO_DECOMPRESS=m
|
|
+CONFIG_PLIST=y
|
|
+CONFIG_HAS_IOMEM=y
|
|
+CONFIG_HAS_IOPORT=y
|
|
+CONFIG_HAS_DMA=y
|
|
--- linux-2.6.24.7.old/arch/mips/jz4730/Makefile 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4730/Makefile 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,22 @@
|
|
+#
|
|
+# Makefile for the Ingenic JZ4730.
|
|
+#
|
|
+
|
|
+# Object file lists.
|
|
+
|
|
+obj-y += prom.o irq.o time.o reset.o setup.o dma.o \
|
|
+ platform.o i2c.o
|
|
+
|
|
+obj-$(CONFIG_PROC_FS) += proc.o
|
|
+
|
|
+# board specific support
|
|
+
|
|
+obj-$(CONFIG_JZ4730_PMP) += board-pmp.o
|
|
+
|
|
+# CPU Frequency scaling support
|
|
+
|
|
+obj-$(CONFIG_CPU_FREQ_JZ) +=cpufreq.o
|
|
+
|
|
+# PM support
|
|
+
|
|
+obj-$(CONFIG_PM_LEGACY) +=pm.o sleep.o
|
|
--- linux-2.6.24.7.old/arch/mips/jz4730/board-pmp.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4730/board-pmp.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,109 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4730/board-pmp.c
|
|
+ *
|
|
+ * JZ4730 PMP board setup routines.
|
|
+ *
|
|
+ * Copyright (c) 2006-2007 Ingenic Semiconductor Inc.
|
|
+ * Author: <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/mm.h>
|
|
+#include <linux/console.h>
|
|
+#include <linux/delay.h>
|
|
+
|
|
+#include <asm/cpu.h>
|
|
+#include <asm/bootinfo.h>
|
|
+#include <asm/mipsregs.h>
|
|
+#include <asm/reboot.h>
|
|
+
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+extern void (*jz_timer_callback)(void);
|
|
+
|
|
+static void dancing(void)
|
|
+{
|
|
+ static unsigned int count = 0;
|
|
+
|
|
+ count ++;
|
|
+ count &= 1;
|
|
+ if (count)
|
|
+ __gpio_set_pin(GPIO_LED_EN);
|
|
+ else
|
|
+ __gpio_clear_pin(GPIO_LED_EN);
|
|
+}
|
|
+
|
|
+static void pmp_timer_ack(void)
|
|
+{
|
|
+ static unsigned int count = 0;
|
|
+ count ++;
|
|
+ if (count % 100 == 0) {
|
|
+ count = 0;
|
|
+ dancing();
|
|
+ }
|
|
+}
|
|
+
|
|
+static void __init board_cpm_setup(void)
|
|
+{
|
|
+ __cpm_start_all();
|
|
+}
|
|
+
|
|
+static void __init board_gpio_setup(void)
|
|
+{
|
|
+ /*
|
|
+ * Most of the gpios have been setup in the bootloader.
|
|
+ */
|
|
+
|
|
+ __harb_usb0_uhc();
|
|
+ __gpio_as_dma();
|
|
+ __gpio_as_eth();
|
|
+ __gpio_as_usb();
|
|
+ __gpio_as_lcd_master();
|
|
+#if defined(CONFIG_I2S_AK4642EN)
|
|
+ __gpio_as_scc1();
|
|
+#endif
|
|
+#if defined(CONFIG_I2S_TSC2301) || defined(CONFIG_I2S_TLC320AIC23)
|
|
+ __gpio_as_ssi();
|
|
+#endif
|
|
+ //__gpio_as_ac97();
|
|
+#if defined(CONFIG_I2S_TSC2301) || defined(CONFIG_I2S_TLC320AIC23) || defined(CONFIG_I2S_CS42L51)
|
|
+ __gpio_as_i2s_slave();
|
|
+#endif
|
|
+ __gpio_as_cim();
|
|
+ __gpio_as_msc();
|
|
+
|
|
+ __gpio_as_output(GPIO_LED_EN);
|
|
+ __gpio_set_pin(GPIO_LED_EN);
|
|
+
|
|
+ __gpio_as_output(GPIO_DISP_OFF_N);
|
|
+ __gpio_set_pin(GPIO_DISP_OFF_N);
|
|
+ __gpio_as_output(GPIO_PWM0);
|
|
+ __gpio_set_pin(GPIO_PWM0);
|
|
+
|
|
+ __gpio_as_input(GPIO_RTC_IRQ);
|
|
+ __gpio_as_output(GPIO_USB_CLK_EN);
|
|
+ __gpio_set_pin(GPIO_USB_CLK_EN);
|
|
+
|
|
+ __gpio_as_input(GPIO_CHARG_STAT);
|
|
+ __gpio_disable_pull(GPIO_CHARG_STAT);
|
|
+
|
|
+ __gpio_as_input(GPIO_UDC_HOTPLUG);
|
|
+ __gpio_disable_pull(GPIO_UDC_HOTPLUG);
|
|
+ __gpio_disable_pull(54); /* fixed ic bug, the pull of gpio pin 86 is as pin 54 */
|
|
+}
|
|
+
|
|
+void __init jz_board_setup(void)
|
|
+{
|
|
+ printk("JZ4730 PMP board setup\n");
|
|
+
|
|
+ board_cpm_setup();
|
|
+ board_gpio_setup();
|
|
+
|
|
+ jz_timer_callback = pmp_timer_ack;
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/jz4730/cpufreq.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4730/cpufreq.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,596 @@
|
|
+
|
|
+/*
|
|
+ * linux/arch/mips/jz4730/cpufreq.c
|
|
+ *
|
|
+ * cpufreq driver for JZ4730
|
|
+ *
|
|
+ * Copyright (c) 2006-2007 Ingenic Semiconductor Inc.
|
|
+ * Author: <lhhuang@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/init.h>
|
|
+
|
|
+#include <linux/cpufreq.h>
|
|
+
|
|
+#include <asm/jzsoc.h>
|
|
+#include <asm/processor.h>
|
|
+
|
|
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
|
|
+ "cpufreq-jz4730", msg)
|
|
+
|
|
+#undef CHANGE_PLL
|
|
+
|
|
+#define PLL_UNCHANGED 0
|
|
+#define PLL_GOES_UP 1
|
|
+#define PLL_GOES_DOWN 2
|
|
+
|
|
+#define PLL_WAIT_500NS (500*(__cpm_get_iclk()/1000000000))
|
|
+
|
|
+/* Saved the boot-time parameters */
|
|
+static struct {
|
|
+ /* SDRAM parameters */
|
|
+ unsigned int mclk; /* memory clock, KHz */
|
|
+ unsigned int tras; /* RAS pulse width, cycles of mclk */
|
|
+ unsigned int rcd; /* RAS to CAS Delay, cycles of mclk */
|
|
+ unsigned int tpc; /* RAS Precharge time, cycles of mclk */
|
|
+ unsigned int trwl; /* Write Precharge Time, cycles of mclk */
|
|
+ unsigned int trc; /* RAS Cycle Time, cycles of mclk */
|
|
+ unsigned int rtcor; /* Refresh Time Constant */
|
|
+ unsigned int sdram_initialized;
|
|
+
|
|
+ /* LCD parameters */
|
|
+ unsigned int lcd_clk; /* LCD clock, Hz */
|
|
+ unsigned int lcdpix_clk; /* LCD Pixel clock, Hz */
|
|
+ unsigned int lcd_clks_initialized;
|
|
+} boot_config;
|
|
+
|
|
+struct jz4730_freq_percpu_info {
|
|
+ struct cpufreq_frequency_table table[7];
|
|
+};
|
|
+
|
|
+static struct jz4730_freq_percpu_info jz4730_freq_table;
|
|
+
|
|
+/*
|
|
+ * This contains the registers value for an operating point.
|
|
+ * If only part of a register needs to change then there is
|
|
+ * a mask value for that register.
|
|
+ * When going to a new operating point the current register
|
|
+ * value is ANDed with the ~mask and ORed with the new value.
|
|
+ */
|
|
+struct dpm_regs {
|
|
+ u32 cfcr; /* Clock Freq Control Register */
|
|
+ u32 cfcr_mask; /* Clock Freq Control Register mask */
|
|
+ u32 cfcr2; /* Clock Freq Control Register 2 */
|
|
+ u32 cfcr2_mask; /* Clock Freq Control Register 2 mask */
|
|
+ u32 plcr1; /* PLL1 Control Register */
|
|
+ u32 plcr1_mask; /* PLL1 Control Register mask */
|
|
+ u32 pll_up_flag; /* New PLL freq is higher than current or not */
|
|
+};
|
|
+
|
|
+extern jz_clocks_t jz_clocks;
|
|
+
|
|
+static void jz_update_clocks(void)
|
|
+{
|
|
+ /* Next clocks must be updated if we have changed
|
|
+ * the PLL or divisors.
|
|
+ */
|
|
+ jz_clocks.iclk = __cpm_get_iclk();
|
|
+ jz_clocks.sclk = __cpm_get_sclk();
|
|
+ jz_clocks.mclk = __cpm_get_mclk();
|
|
+ jz_clocks.pclk = __cpm_get_pclk();
|
|
+ jz_clocks.lcdclk = __cpm_get_lcdclk();
|
|
+ jz_clocks.pixclk = __cpm_get_pixclk();
|
|
+}
|
|
+
|
|
+static void
|
|
+jz_init_boot_config(void)
|
|
+{
|
|
+ if (!boot_config.lcd_clks_initialized) {
|
|
+ /* the first time to scale pll */
|
|
+ boot_config.lcd_clk = __cpm_get_lcdclk();
|
|
+ boot_config.lcdpix_clk = __cpm_get_pixclk();
|
|
+ boot_config.lcd_clks_initialized = 1;
|
|
+ }
|
|
+
|
|
+ if (!boot_config.sdram_initialized) {
|
|
+ /* the first time to scale frequencies */
|
|
+ unsigned int dmcr, rtcor;
|
|
+ unsigned int tras, rcd, tpc, trwl, trc;
|
|
+
|
|
+ dmcr = REG_EMC_DMCR;
|
|
+ rtcor = REG_EMC_RTCOR;
|
|
+
|
|
+ tras = (dmcr >> 13) & 0x7;
|
|
+ rcd = (dmcr >> 11) & 0x3;
|
|
+ tpc = (dmcr >> 8) & 0x7;
|
|
+ trwl = (dmcr >> 5) & 0x3;
|
|
+ trc = (dmcr >> 2) & 0x7;
|
|
+
|
|
+ boot_config.mclk = __cpm_get_mclk() / 1000;
|
|
+ boot_config.tras = tras + 4;
|
|
+ boot_config.rcd = rcd + 1;
|
|
+ boot_config.tpc = tpc + 1;
|
|
+ boot_config.trwl = trwl + 1;
|
|
+ boot_config.trc = trc * 2 + 1;
|
|
+ boot_config.rtcor = rtcor;
|
|
+
|
|
+ boot_config.sdram_initialized = 1;
|
|
+ }
|
|
+}
|
|
+
|
|
+static void jz_update_dram_rtcor(unsigned int new_mclk)
|
|
+{
|
|
+ unsigned int rtcor;
|
|
+
|
|
+ new_mclk /= 1000;
|
|
+ rtcor = boot_config.rtcor * new_mclk / boot_config.mclk;
|
|
+ rtcor--;
|
|
+
|
|
+ if (rtcor < 1) rtcor = 1;
|
|
+ if (rtcor > 255) rtcor = 255;
|
|
+
|
|
+ REG_EMC_RTCOR = rtcor;
|
|
+ REG_EMC_RTCNT = rtcor;
|
|
+}
|
|
+
|
|
+static void jz_update_dram_dmcr(unsigned int new_mclk)
|
|
+{
|
|
+ unsigned int dmcr;
|
|
+ unsigned int tras, rcd, tpc, trwl, trc;
|
|
+ unsigned int valid_time, new_time; /* ns */
|
|
+
|
|
+ new_mclk /= 1000;
|
|
+ tras = boot_config.tras * new_mclk / boot_config.mclk;
|
|
+ rcd = boot_config.rcd * new_mclk / boot_config.mclk;
|
|
+ tpc = boot_config.tpc * new_mclk / boot_config.mclk;
|
|
+ trwl = boot_config.trwl * new_mclk / boot_config.mclk;
|
|
+ trc = boot_config.trc * new_mclk / boot_config.mclk;
|
|
+
|
|
+ /* Validation checking */
|
|
+ valid_time = (boot_config.tras * 1000000) / boot_config.mclk;
|
|
+ new_time = (tras * 1000000) / new_mclk;
|
|
+ if (new_time < valid_time) tras += 1;
|
|
+
|
|
+ valid_time = (boot_config.rcd * 1000000) / boot_config.mclk;
|
|
+ new_time = (rcd * 1000000) / new_mclk;
|
|
+ if (new_time < valid_time) rcd += 1;
|
|
+
|
|
+ valid_time = (boot_config.tpc * 1000000) / boot_config.mclk;
|
|
+ new_time = (tpc * 1000000) / new_mclk;
|
|
+ if (new_time < valid_time) tpc += 1;
|
|
+
|
|
+ valid_time = (boot_config.trwl * 1000000) / boot_config.mclk;
|
|
+ new_time = (trwl * 1000000) / new_mclk;
|
|
+ if (new_time < valid_time) trwl += 1;
|
|
+
|
|
+ valid_time = (boot_config.trc * 1000000) / boot_config.mclk;
|
|
+ new_time = (trc * 1000000) / new_mclk;
|
|
+ if (new_time < valid_time) trc += 2;
|
|
+
|
|
+ tras = (tras < 4) ? 4: tras;
|
|
+ tras = (tras > 11) ? 11: tras;
|
|
+ tras -= 4;
|
|
+
|
|
+ rcd = (rcd < 1) ? 1: rcd;
|
|
+ rcd = (rcd > 4) ? 4: rcd;
|
|
+ rcd -= 1;
|
|
+
|
|
+ tpc = (tpc < 1) ? 1: tpc;
|
|
+ tpc = (tpc > 8) ? 8: tpc;
|
|
+ tpc -= 1;
|
|
+
|
|
+ trwl = (trwl < 1) ? 1: trwl;
|
|
+ trwl = (trwl > 4) ? 4: trwl;
|
|
+ trwl -= 1;
|
|
+
|
|
+ trc = (trc < 1) ? 1: trc;
|
|
+ trc = (trc > 15) ? 15: trc;
|
|
+ trc /= 2;
|
|
+
|
|
+ dmcr = REG_EMC_DMCR;
|
|
+
|
|
+ dmcr &= ~(EMC_DMCR_TRAS_MASK | EMC_DMCR_RCD_MASK | EMC_DMCR_TPC_MASK | EMC_DMCR_TRWL_MASK | EMC_DMCR_TRC_MASK);
|
|
+ dmcr |= ((tras << EMC_DMCR_TRAS_BIT) | (rcd << EMC_DMCR_RCD_BIT) | (tpc << EMC_DMCR_TPC_BIT) | (trwl << EMC_DMCR_TRWL_BIT) | (trc << EMC_DMCR_TRC_BIT));
|
|
+
|
|
+ REG_EMC_DMCR = dmcr;
|
|
+}
|
|
+
|
|
+static void jz_update_dram_prev(unsigned int cur_mclk, unsigned int new_mclk)
|
|
+{
|
|
+ /* No risk, no fun: run with interrupts on! */
|
|
+ if (new_mclk > cur_mclk) {
|
|
+ /* We're going FASTER, so first update TRAS, RCD, TPC, TRWL
|
|
+ * and TRC of DMCR before changing the frequency.
|
|
+ */
|
|
+ jz_update_dram_dmcr(new_mclk);
|
|
+ } else {
|
|
+ /* We're going SLOWER: first update RTCOR value
|
|
+ * before changing the frequency.
|
|
+ */
|
|
+ jz_update_dram_rtcor(new_mclk);
|
|
+ }
|
|
+}
|
|
+
|
|
+static void jz_update_dram_post(unsigned int cur_mclk, unsigned int new_mclk)
|
|
+{
|
|
+ /* No risk, no fun: run with interrupts on! */
|
|
+ if (new_mclk > cur_mclk) {
|
|
+ /* We're going FASTER, so update RTCOR
|
|
+ * after changing the frequency
|
|
+ */
|
|
+ jz_update_dram_rtcor(new_mclk);
|
|
+ } else {
|
|
+ /* We're going SLOWER: so update TRAS, RCD, TPC, TRWL
|
|
+ * and TRC of DMCR after changing the frequency.
|
|
+ */
|
|
+ jz_update_dram_dmcr(new_mclk);
|
|
+ }
|
|
+}
|
|
+
|
|
+static void jz_scale_divisors(struct dpm_regs *regs)
|
|
+{
|
|
+ unsigned int cfcr;
|
|
+ unsigned int cur_mclk, new_mclk;
|
|
+ int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
|
|
+ unsigned int tmp = 0, wait = PLL_WAIT_500NS;
|
|
+
|
|
+ cfcr = REG_CPM_CFCR;
|
|
+ cfcr &= ~((unsigned long)regs->cfcr_mask);
|
|
+ cfcr |= regs->cfcr;
|
|
+ cfcr |= CPM_CFCR_UPE; /* update immediately */
|
|
+
|
|
+ cur_mclk = __cpm_get_mclk();
|
|
+ new_mclk = __cpm_get_pllout() / div[(cfcr & CPM_CFCR_MFR_MASK) >> CPM_CFCR_MFR_BIT];
|
|
+
|
|
+ /* Update some DRAM parameters before changing frequency */
|
|
+ jz_update_dram_prev(cur_mclk, new_mclk);
|
|
+
|
|
+ /* update register to change the clocks.
|
|
+ * align this code to a cache line.
|
|
+ */
|
|
+ __asm__ __volatile__(
|
|
+ ".set noreorder\n\t"
|
|
+ ".align 5\n"
|
|
+ "sw %1,0(%0)\n\t"
|
|
+ "li %3,0\n\t"
|
|
+ "1:\n\t"
|
|
+ "bne %3,%2,1b\n\t"
|
|
+ "addi %3, 1\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ ".set reorder\n\t"
|
|
+ :
|
|
+ : "r" (CPM_CFCR), "r" (cfcr), "r" (wait), "r" (tmp));
|
|
+
|
|
+ /* Update some other DRAM parameters after changing frequency */
|
|
+ jz_update_dram_post(cur_mclk, new_mclk);
|
|
+}
|
|
+
|
|
+#ifdef CHANGE_PLL
|
|
+/* Maintain the LCD clock and pixel clock */
|
|
+static void jz_scale_lcd_divisors(struct dpm_regs *regs)
|
|
+{
|
|
+ unsigned int new_pll, new_lcd_div, new_lcdpix_div;
|
|
+ unsigned int cfcr;
|
|
+ unsigned int tmp = 0, wait = PLL_WAIT_500NS;
|
|
+
|
|
+ if (!boot_config.lcd_clks_initialized) return;
|
|
+
|
|
+ new_pll = __cpm_get_pllout();
|
|
+ new_lcd_div = new_pll / boot_config.lcd_clk;
|
|
+ new_lcdpix_div = new_pll / boot_config.lcdpix_clk;
|
|
+
|
|
+ if (new_lcd_div < 1)
|
|
+ new_lcd_div = 1;
|
|
+ if (new_lcd_div > 16)
|
|
+ new_lcd_div = 16;
|
|
+
|
|
+ if (new_lcdpix_div < 1)
|
|
+ new_lcdpix_div = 1;
|
|
+ if (new_lcdpix_div > 512)
|
|
+ new_lcdpix_div = 512;
|
|
+
|
|
+ REG_CPM_CFCR2 = new_lcdpix_div - 1;
|
|
+
|
|
+ cfcr = REG_CPM_CFCR;
|
|
+ cfcr &= ~CPM_CFCR_LFR_MASK;
|
|
+ cfcr |= ((new_lcd_div - 1) << CPM_CFCR_LFR_BIT);
|
|
+ cfcr |= CPM_CFCR_UPE; /* update immediately */
|
|
+
|
|
+ /* update register to change the clocks.
|
|
+ * align this code to a cache line.
|
|
+ */
|
|
+ __asm__ __volatile__(
|
|
+ ".set noreorder\n\t"
|
|
+ ".align 5\n"
|
|
+ "sw %1,0(%0)\n\t"
|
|
+ "li %3,0\n\t"
|
|
+ "1:\n\t"
|
|
+ "bne %3,%2,1b\n\t"
|
|
+ "addi %3, 1\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ ".set reorder\n\t"
|
|
+ :
|
|
+ : "r" (CPM_CFCR), "r" (cfcr), "r" (wait), "r" (tmp));
|
|
+}
|
|
+
|
|
+static void jz_scale_pll(struct dpm_regs *regs)
|
|
+{
|
|
+ unsigned int plcr1;
|
|
+ unsigned int cur_mclk, new_mclk, new_pll;
|
|
+ int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
|
|
+ int od[] = {1, 2, 2, 4};
|
|
+
|
|
+ plcr1 = REG_CPM_PLCR1;
|
|
+ plcr1 &= ~(regs->plcr1_mask | CPM_PLCR1_PLL1S | CPM_PLCR1_PLL1EN | CPM_PLCR1_PLL1ST_MASK);
|
|
+ regs->plcr1 &= ~CPM_PLCR1_PLL1EN;
|
|
+ plcr1 |= (regs->plcr1 | 0xff);
|
|
+
|
|
+ /* Update some DRAM parameters before changing frequency */
|
|
+ new_pll = JZ_EXTAL * ((plcr1>>23)+2) / ((((plcr1>>18)&0x1f)+2) * od[(plcr1>>16)&0x03]);
|
|
+ cur_mclk = __cpm_get_mclk();
|
|
+ new_mclk = new_pll / div[(REG_CPM_CFCR>>16) & 0xf];
|
|
+
|
|
+ /*
|
|
+ * Update some SDRAM parameters
|
|
+ */
|
|
+ jz_update_dram_prev(cur_mclk, new_mclk);
|
|
+
|
|
+ /*
|
|
+ * Update PLL, align code to cache line.
|
|
+ */
|
|
+ plcr1 |= CPM_PLCR1_PLL1EN;
|
|
+ __asm__ __volatile__(
|
|
+ ".set noreorder\n\t"
|
|
+ ".align 5\n"
|
|
+ "sw %1,0(%0)\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ ".set reorder\n\t"
|
|
+ :
|
|
+ : "r" (CPM_PLCR1), "r" (plcr1));
|
|
+
|
|
+ /* Update some other DRAM parameters after changing frequency */
|
|
+ jz_update_dram_post(cur_mclk, new_mclk);
|
|
+}
|
|
+#endif
|
|
+
|
|
+static void jz4730_transition(struct dpm_regs *regs)
|
|
+{
|
|
+ /*
|
|
+ * Get and save some boot-time conditions.
|
|
+ */
|
|
+ jz_init_boot_config();
|
|
+
|
|
+#ifdef CHANGE_PLL
|
|
+ /*
|
|
+ * Disable LCD before scaling pll.
|
|
+ * LCD and LCD pixel clocks should not be changed even if the PLL
|
|
+ * output frequency has been changed.
|
|
+ */
|
|
+ REG_LCD_CTRL &= ~LCD_CTRL_ENA;
|
|
+#endif
|
|
+ /*
|
|
+ * Stop module clocks before scaling PLL
|
|
+ */
|
|
+ __cpm_stop_eth();
|
|
+ __cpm_stop_aic_pclk();
|
|
+ __cpm_stop_aic_bitclk();
|
|
+
|
|
+ /* ... add more as necessary */
|
|
+
|
|
+ if (regs->pll_up_flag == PLL_GOES_UP) {
|
|
+ /* the pll frequency is going up, so change dividors first */
|
|
+ jz_scale_divisors(regs);
|
|
+#ifdef CHANGE_PLL
|
|
+ jz_scale_pll(regs);
|
|
+#endif
|
|
+ }
|
|
+ else if (regs->pll_up_flag == PLL_GOES_DOWN) {
|
|
+ /* the pll frequency is going down, so change pll first */
|
|
+#ifdef CHANGE_PLL
|
|
+ jz_scale_pll(regs);
|
|
+#endif
|
|
+ jz_scale_divisors(regs);
|
|
+ }
|
|
+ else {
|
|
+ /* the pll frequency is unchanged, so change divisors only */
|
|
+ jz_scale_divisors(regs);
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * Restart module clocks before scaling PLL
|
|
+ */
|
|
+ __cpm_start_eth();
|
|
+ __cpm_start_aic_pclk();
|
|
+ __cpm_start_aic_bitclk();
|
|
+
|
|
+ /* ... add more as necessary */
|
|
+
|
|
+#ifdef CHANGE_PLL
|
|
+ /* Scale the LCD divisors after scaling pll */
|
|
+ if (regs->pll_up_flag != PLL_UNCHANGED) {
|
|
+ jz_scale_lcd_divisors(regs);
|
|
+ }
|
|
+
|
|
+ /* Enable LCD controller */
|
|
+ REG_LCD_CTRL &= ~LCD_CTRL_DIS;
|
|
+ REG_LCD_CTRL |= LCD_CTRL_ENA;
|
|
+#endif
|
|
+
|
|
+ /* Update system clocks */
|
|
+ jz_update_clocks();
|
|
+}
|
|
+
|
|
+extern unsigned int idle_times;
|
|
+static unsigned int jz4730_freq_get(unsigned int cpu)
|
|
+{
|
|
+ return (__cpm_get_iclk() / 1000);
|
|
+}
|
|
+
|
|
+static unsigned int index_to_divisor(unsigned int index, struct dpm_regs *regs)
|
|
+{
|
|
+ int n2FR[33] = {
|
|
+ 0, 0, 1, 2, 3, 0, 4, 0, 5, 0, 0, 0, 6, 0, 0, 0,
|
|
+ 7, 0, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 0, 0,
|
|
+ 9
|
|
+ };
|
|
+ int div[4] = {1, 2, 2, 2}; /* divisors of I:S:P:M */
|
|
+ unsigned int div_of_cclk, new_freq, i;
|
|
+
|
|
+ regs->pll_up_flag = PLL_UNCHANGED;
|
|
+ regs->cfcr_mask = CPM_CFCR_IFR_MASK | CPM_CFCR_SFR_MASK | CPM_CFCR_PFR_MASK | CPM_CFCR_MFR_MASK;
|
|
+
|
|
+ new_freq = jz4730_freq_table.table[index].frequency;
|
|
+
|
|
+ do {
|
|
+ div_of_cclk = __cpm_get_pllout() / (1000 * new_freq);
|
|
+ } while (div_of_cclk==0);
|
|
+
|
|
+ if(div_of_cclk == 1 || div_of_cclk == 2 || div_of_cclk == 4) {
|
|
+ for(i = 1; i<4; i++) {
|
|
+ div[i] = 3;
|
|
+ }
|
|
+ } else {
|
|
+ for(i = 1; i<4; i++) {
|
|
+ div[i] = 2;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ for(i = 0; i<4; i++) {
|
|
+ div[i] *= div_of_cclk;
|
|
+ }
|
|
+
|
|
+ dprintk("divisors of I:S:P:M = %d:%d:%d:%d\n", div[0], div[1], div[2], div[3]);
|
|
+
|
|
+ regs->cfcr = (n2FR[div[0]] << CPM_CFCR_IFR_BIT) |
|
|
+ (n2FR[div[1]] << CPM_CFCR_SFR_BIT) |
|
|
+ (n2FR[div[2]] << CPM_CFCR_PFR_BIT) |
|
|
+ (n2FR[div[3]] << CPM_CFCR_MFR_BIT);
|
|
+
|
|
+ return div_of_cclk;
|
|
+}
|
|
+
|
|
+static void jz4730_set_cpu_divider_index(unsigned int cpu, unsigned int index)
|
|
+{
|
|
+ unsigned long divisor, old_divisor;
|
|
+ struct cpufreq_freqs freqs;
|
|
+ struct dpm_regs regs;
|
|
+
|
|
+ old_divisor = __cpm_get_pllout() / __cpm_get_iclk();
|
|
+ divisor = index_to_divisor(index, ®s);
|
|
+
|
|
+ freqs.old = __cpm_get_iclk() / 1000;
|
|
+ freqs.new = __cpm_get_pllout() / (1000 * divisor);
|
|
+ freqs.cpu = cpu;
|
|
+
|
|
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
|
|
+
|
|
+ if (old_divisor != divisor)
|
|
+ jz4730_transition(®s);
|
|
+
|
|
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
|
|
+}
|
|
+
|
|
+static int jz4730_freq_target(struct cpufreq_policy *policy,
|
|
+ unsigned int target_freq,
|
|
+ unsigned int relation)
|
|
+{
|
|
+ unsigned int new_index = 0;
|
|
+
|
|
+ if (cpufreq_frequency_table_target(policy,
|
|
+ &jz4730_freq_table.table[0],
|
|
+ target_freq, relation, &new_index))
|
|
+ return -EINVAL;
|
|
+
|
|
+ jz4730_set_cpu_divider_index(policy->cpu, new_index);
|
|
+
|
|
+ dprintk("new frequency is %d KHz (REG_CPM_CFCR:0x%x)\n", __cpm_get_iclk() / 1000, REG_CPM_CFCR);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int jz4730_freq_verify(struct cpufreq_policy *policy)
|
|
+{
|
|
+ return cpufreq_frequency_table_verify(policy,
|
|
+ &jz4730_freq_table.table[0]);
|
|
+}
|
|
+
|
|
+static int __init jz4730_cpufreq_driver_init(struct cpufreq_policy *policy)
|
|
+{
|
|
+
|
|
+ struct cpufreq_frequency_table *table = &jz4730_freq_table.table[0];
|
|
+ unsigned int MAX_FREQ;
|
|
+
|
|
+ dprintk(KERN_INFO "Jz4730 cpufreq driver\n");
|
|
+
|
|
+ if (policy->cpu != 0)
|
|
+ return -EINVAL;
|
|
+
|
|
+ policy->cur = MAX_FREQ = __cpm_get_iclk() / 1000; /* in kHz. Current and max frequency is determined by u-boot */
|
|
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
|
|
+
|
|
+ policy->cpuinfo.min_freq = MAX_FREQ/8;
|
|
+ policy->cpuinfo.max_freq = MAX_FREQ;
|
|
+ policy->cpuinfo.transition_latency = 100000; /* in 10^(-9) s = nanoseconds */
|
|
+
|
|
+ table[0].index = 0;
|
|
+ table[0].frequency = MAX_FREQ/8;
|
|
+ table[1].index = 1;
|
|
+ table[1].frequency = MAX_FREQ/6;
|
|
+ table[2].index = 2;
|
|
+ table[2].frequency = MAX_FREQ/4;
|
|
+ table[3].index = 3;
|
|
+ table[3].frequency = MAX_FREQ/3;
|
|
+ table[4].index = 4;
|
|
+ table[4].frequency = MAX_FREQ/2;
|
|
+ table[5].index = 5;
|
|
+ table[5].frequency = MAX_FREQ;
|
|
+ table[6].index = 6;
|
|
+ table[6].frequency = CPUFREQ_TABLE_END;
|
|
+
|
|
+ return cpufreq_frequency_table_cpuinfo(policy, table);
|
|
+}
|
|
+
|
|
+static struct cpufreq_driver cpufreq_jz4730_driver = {
|
|
+// .flags = CPUFREQ_STICKY,
|
|
+ .init = jz4730_cpufreq_driver_init,
|
|
+ .verify = jz4730_freq_verify,
|
|
+ .target = jz4730_freq_target,
|
|
+ .get = jz4730_freq_get,
|
|
+ .name = "jz4730",
|
|
+};
|
|
+
|
|
+static int __init jz4730_cpufreq_init(void)
|
|
+{
|
|
+ return cpufreq_register_driver(&cpufreq_jz4730_driver);
|
|
+}
|
|
+
|
|
+static void __exit jz4730_cpufreq_exit(void)
|
|
+{
|
|
+ cpufreq_unregister_driver(&cpufreq_jz4730_driver);
|
|
+}
|
|
+
|
|
+module_init(jz4730_cpufreq_init);
|
|
+module_exit(jz4730_cpufreq_exit);
|
|
+
|
|
+MODULE_AUTHOR("Regen <lhhuang@ingenic.cn>");
|
|
+MODULE_DESCRIPTION("cpufreq driver for Jz4730");
|
|
+MODULE_LICENSE("GPL");
|
|
+
|
|
--- linux-2.6.24.7.old/arch/mips/jz4730/dma.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4730/dma.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,509 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4730/dma.c
|
|
+ *
|
|
+ * JZ4730 DMA PC-like APIs.
|
|
+ *
|
|
+ * Copyright (c) 2006-2007 Ingenic Semiconductor Inc.
|
|
+ * Author: <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/errno.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/spinlock.h>
|
|
+#include <linux/string.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/soundcard.h>
|
|
+
|
|
+#include <asm/system.h>
|
|
+#include <asm/addrspace.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+/*
|
|
+ * A note on resource allocation:
|
|
+ *
|
|
+ * All drivers needing DMA channels, should allocate and release them
|
|
+ * through the public routines `jz_request_dma()' and `jz_free_dma()'.
|
|
+ *
|
|
+ * In order to avoid problems, all processes should allocate resources in
|
|
+ * the same sequence and release them in the reverse order.
|
|
+ *
|
|
+ * So, when allocating DMAs and IRQs, first allocate the DMA, then the IRQ.
|
|
+ * When releasing them, first release the IRQ, then release the DMA. The
|
|
+ * main reason for this order is that, if you are requesting the DMA buffer
|
|
+ * done interrupt, you won't know the irq number until the DMA channel is
|
|
+ * returned from jz_request_dma().
|
|
+ */
|
|
+
|
|
+struct jz_dma_chan jz_dma_table[NUM_DMA] = {
|
|
+ {dev_id:-1,},
|
|
+ {dev_id:-1,},
|
|
+ {dev_id:-1,},
|
|
+ {dev_id:-1,},
|
|
+ {dev_id:-1,},
|
|
+ {dev_id:-1,},
|
|
+};
|
|
+
|
|
+
|
|
+// Device FIFO addresses and default DMA modes
|
|
+static const struct {
|
|
+ unsigned int fifo_addr;
|
|
+ unsigned int dma_mode;
|
|
+ unsigned int dma_source;
|
|
+} dma_dev_table[NUM_DMA_DEV] = {
|
|
+ {CPHYSADDR(UART0_BASE), DMA_8bit_TX_CONF|DMA_MODE_WRITE, DMAC_DRSR_RS_UART0OUT},
|
|
+ {CPHYSADDR(UART0_BASE), DMA_8bit_RX_CONF|DMA_MODE_READ, DMAC_DRSR_RS_UART0IN},
|
|
+ {CPHYSADDR(UART1_BASE), DMA_8bit_TX_CONF|DMA_MODE_WRITE, DMAC_DRSR_RS_UART1OUT},
|
|
+ {CPHYSADDR(UART1_BASE), DMA_8bit_RX_CONF|DMA_MODE_READ, DMAC_DRSR_RS_UART1IN},
|
|
+ {CPHYSADDR(UART2_BASE), DMA_8bit_TX_CONF|DMA_MODE_WRITE, DMAC_DRSR_RS_UART2OUT},
|
|
+ {CPHYSADDR(UART2_BASE), DMA_8bit_RX_CONF|DMA_MODE_READ, DMAC_DRSR_RS_UART2IN},
|
|
+ {CPHYSADDR(UART3_BASE), DMA_8bit_TX_CONF|DMA_MODE_WRITE, DMAC_DRSR_RS_UART3OUT},
|
|
+ {CPHYSADDR(UART3_BASE), DMA_8bit_RX_CONF|DMA_MODE_READ, DMAC_DRSR_RS_UART3IN},
|
|
+ {CPHYSADDR(SSI_DR), DMA_32bit_TX_CONF|DMA_MODE_WRITE, DMAC_DRSR_RS_SSIOUT},
|
|
+ {CPHYSADDR(SSI_DR), DMA_32bit_RX_CONF|DMA_MODE_READ, DMAC_DRSR_RS_SSIIN},
|
|
+ {CPHYSADDR(MSC_TXFIFO), DMA_32bit_TX_CONF|DMA_MODE_WRITE, DMAC_DRSR_RS_MSCOUT},
|
|
+ {CPHYSADDR(MSC_RXFIFO), DMA_32bit_RX_CONF|DMA_MODE_READ, DMAC_DRSR_RS_MSCIN},
|
|
+ {CPHYSADDR(AIC_DR), DMA_32bit_TX_CONF|DMA_MODE_WRITE, DMAC_DRSR_RS_AICOUT},
|
|
+ {CPHYSADDR(AIC_DR), DMA_32bit_RX_CONF|DMA_MODE_READ, DMAC_DRSR_RS_AICIN},
|
|
+ {0, DMA_AUTOINIT, 0},
|
|
+};
|
|
+
|
|
+
|
|
+int jz_dma_read_proc(char *buf, char **start, off_t fpos,
|
|
+ int length, int *eof, void *data)
|
|
+{
|
|
+ int i, len = 0;
|
|
+ struct jz_dma_chan *chan;
|
|
+
|
|
+ for (i = 0; i < NUM_DMA; i++) {
|
|
+ if ((chan = get_dma_chan(i)) != NULL) {
|
|
+ len += sprintf(buf + len, "%2d: %s\n",
|
|
+ i, chan->dev_str);
|
|
+ }
|
|
+ }
|
|
+
|
|
+ if (fpos >= len) {
|
|
+ *start = buf;
|
|
+ *eof = 1;
|
|
+ return 0;
|
|
+ }
|
|
+ *start = buf + fpos;
|
|
+ if ((len -= fpos) > length)
|
|
+ return length;
|
|
+ *eof = 1;
|
|
+ return len;
|
|
+}
|
|
+
|
|
+
|
|
+void dump_jz_dma_channel(unsigned int dmanr)
|
|
+{
|
|
+ struct jz_dma_chan *chan;
|
|
+
|
|
+ if (dmanr > NUM_DMA)
|
|
+ return;
|
|
+ chan = &jz_dma_table[dmanr];
|
|
+
|
|
+ printk(KERN_INFO "DMA%d Register Dump:\n", dmanr);
|
|
+ printk(KERN_INFO " DMACR= 0x%08x\n", REG_DMAC_DMACR);
|
|
+ printk(KERN_INFO " DSAR = 0x%08x\n", REG_DMAC_DSAR(dmanr));
|
|
+ printk(KERN_INFO " DDAR = 0x%08x\n", REG_DMAC_DDAR(dmanr));
|
|
+ printk(KERN_INFO " DTCR = 0x%08x\n", REG_DMAC_DTCR(dmanr));
|
|
+ printk(KERN_INFO " DRSR = 0x%08x\n", REG_DMAC_DRSR(dmanr));
|
|
+ printk(KERN_INFO " DCCSR = 0x%08x\n", REG_DMAC_DCCSR(dmanr));
|
|
+}
|
|
+
|
|
+
|
|
+/**
|
|
+ * jz_request_dma - dynamically allcate an idle DMA channel to return
|
|
+ * @dev_id: the specified dma device id or DMA_ID_RAW_REQ
|
|
+ * @dev_str: the specified dma device string name
|
|
+ * @irqhandler: the irq handler, or NULL
|
|
+ * @irqflags: the irq handler flags
|
|
+ * @irq_dev_id: the irq handler device id for shared irq
|
|
+ *
|
|
+ * Finds a free channel, and binds the requested device to it.
|
|
+ * Returns the allocated channel number, or negative on error.
|
|
+ * Requests the DMA done IRQ if irqhandler != NULL.
|
|
+ *
|
|
+*/
|
|
+int jz_request_dma(int dev_id, const char *dev_str,
|
|
+ irqreturn_t (*irqhandler)(int, void *),
|
|
+ unsigned long irqflags,
|
|
+ void *irq_dev_id)
|
|
+{
|
|
+ struct jz_dma_chan *chan;
|
|
+ int i, ret;
|
|
+
|
|
+ if (dev_id < 0 || dev_id >= NUM_DMA_DEV)
|
|
+ return -EINVAL;
|
|
+
|
|
+ for (i = 0; i < NUM_DMA; i++) {
|
|
+ if (jz_dma_table[i].dev_id < 0)
|
|
+ break;
|
|
+ }
|
|
+ if (i == NUM_DMA)
|
|
+ return -ENODEV;
|
|
+
|
|
+ chan = &jz_dma_table[i];
|
|
+
|
|
+ if (irqhandler) {
|
|
+ chan->irq = IRQ_DMA_0 + i; // see intc.h
|
|
+ chan->irq_dev = irq_dev_id;
|
|
+ if ((ret = request_irq(chan->irq, irqhandler, irqflags,
|
|
+ dev_str, chan->irq_dev))) {
|
|
+ chan->irq = 0;
|
|
+ chan->irq_dev = NULL;
|
|
+ return ret;
|
|
+ }
|
|
+ } else {
|
|
+ chan->irq = 0;
|
|
+ chan->irq_dev = NULL;
|
|
+ }
|
|
+
|
|
+ // fill it in
|
|
+ chan->io = i;
|
|
+ chan->dev_id = dev_id;
|
|
+ chan->dev_str = dev_str;
|
|
+ chan->fifo_addr = dma_dev_table[dev_id].fifo_addr;
|
|
+ chan->mode = dma_dev_table[dev_id].dma_mode;
|
|
+ chan->source = dma_dev_table[dev_id].dma_source;
|
|
+
|
|
+ return i;
|
|
+}
|
|
+
|
|
+void jz_free_dma(unsigned int dmanr)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+ if (!chan) {
|
|
+ printk("Trying to free DMA%d\n", dmanr);
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ disable_dma(dmanr);
|
|
+ if (chan->irq)
|
|
+ free_irq(chan->irq, chan->irq_dev);
|
|
+
|
|
+ chan->irq = 0;
|
|
+ chan->irq_dev = NULL;
|
|
+ chan->dev_id = -1;
|
|
+}
|
|
+
|
|
+void jz_set_dma_dest_width(int dmanr, int nbit)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+ if (!chan)
|
|
+ return;
|
|
+ chan->mode &= ~DMAC_DCCSR_DWDH_MASK;
|
|
+ switch (nbit) {
|
|
+ case 8:
|
|
+ chan->mode |= DMAC_DCCSR_DWDH_8;
|
|
+ break;
|
|
+ case 16:
|
|
+ chan->mode |= DMAC_DCCSR_DWDH_16;
|
|
+ break;
|
|
+ case 32:
|
|
+ chan->mode |= DMAC_DCCSR_DWDH_32;
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+void jz_set_dma_src_width(int dmanr, int nbit)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+ if (!chan)
|
|
+ return;
|
|
+ chan->mode &= ~DMAC_DCCSR_SWDH_MASK;
|
|
+ switch (nbit) {
|
|
+ case 8:
|
|
+ chan->mode |= DMAC_DCCSR_SWDH_8;
|
|
+ break;
|
|
+ case 16:
|
|
+ chan->mode |= DMAC_DCCSR_SWDH_16;
|
|
+ break;
|
|
+ case 32:
|
|
+ chan->mode |= DMAC_DCCSR_SWDH_32;
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+void jz_set_dma_block_size(int dmanr, int nbyte)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+ if (!chan)
|
|
+ return;
|
|
+ chan->mode &= ~DMAC_DCCSR_DS_MASK;
|
|
+ switch (nbyte) {
|
|
+ case 1:
|
|
+ chan->mode |= DMAC_DCCSR_DS_8b;
|
|
+ break;
|
|
+ case 2:
|
|
+ chan->mode |= DMAC_DCCSR_DS_16b;
|
|
+ break;
|
|
+ case 4:
|
|
+ chan->mode |= DMAC_DCCSR_DS_32b;
|
|
+ break;
|
|
+ case 16:
|
|
+ chan->mode |= DMAC_DCCSR_DS_16B;
|
|
+ break;
|
|
+ case 32:
|
|
+ chan->mode |= DMAC_DCCSR_DS_32B;
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+/**
|
|
+ * jz_set_dma_mode - do the raw settings for the specified DMA channel
|
|
+ * @dmanr: the specified DMA channel
|
|
+ * @mode: dma operate mode, DMA_MODE_READ or DMA_MODE_WRITE
|
|
+ * @dma_mode: dma raw mode
|
|
+ * @dma_source: dma raw request source
|
|
+ * @fifo_addr: dma raw device fifo address
|
|
+ *
|
|
+ * Ensure call jz_request_dma(DMA_ID_RAW_REQ, ...) first, then call
|
|
+ * jz_set_dma_mode() rather than set_dma_mode() if you work with
|
|
+ * and external request dma device.
|
|
+ *
|
|
+ * NOTE: Don not dynamically allocate dma channel if one external request
|
|
+ * dma device will occupy this channel.
|
|
+*/
|
|
+int jz_set_dma_mode(unsigned int dmanr, unsigned int mode,
|
|
+ unsigned int dma_mode, unsigned int dma_source,
|
|
+ unsigned int fifo_addr)
|
|
+{
|
|
+ int dev_id, i;
|
|
+ struct jz_dma_chan *chan;
|
|
+
|
|
+ if (dmanr > NUM_DMA)
|
|
+ return -ENODEV;
|
|
+ for (i = 0; i < NUM_DMA; i++) {
|
|
+ if (jz_dma_table[i].dev_id < 0)
|
|
+ break;
|
|
+ }
|
|
+ if (i == NUM_DMA)
|
|
+ return -ENODEV;
|
|
+
|
|
+ chan = &jz_dma_table[dmanr];
|
|
+ dev_id = chan->dev_id;
|
|
+ if (dev_id > 0) {
|
|
+ printk(KERN_DEBUG "%s sets the allocated DMA channel %d!\n",
|
|
+ __FUNCTION__, dmanr);
|
|
+ return -ENODEV;
|
|
+ }
|
|
+
|
|
+ /* clone it from the dynamically allocated. */
|
|
+ if (i != dmanr) {
|
|
+ chan->irq = jz_dma_table[i].irq;
|
|
+ chan->irq_dev = jz_dma_table[i].irq_dev;
|
|
+ chan->dev_str = jz_dma_table[i].dev_str;
|
|
+ jz_dma_table[i].irq = 0;
|
|
+ jz_dma_table[i].irq_dev = NULL;
|
|
+ jz_dma_table[i].dev_id = -1;
|
|
+ }
|
|
+ chan->dev_id = DMA_ID_RAW_SET;
|
|
+ chan->io = dmanr;
|
|
+ chan->fifo_addr = fifo_addr;
|
|
+ chan->mode = dma_mode;
|
|
+ chan->source = dma_source;
|
|
+
|
|
+ set_dma_mode(dmanr, dma_mode);
|
|
+
|
|
+ return dmanr;
|
|
+}
|
|
+
|
|
+void enable_dma(unsigned int dmanr)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ REG_DMAC_DCCSR(chan->io) &= ~(DMAC_DCCSR_HLT | DMAC_DCCSR_TC | DMAC_DCCSR_AR);
|
|
+ __dmac_enable_channel(dmanr);
|
|
+ if (chan->irq)
|
|
+ __dmac_channel_enable_irq(dmanr);
|
|
+}
|
|
+
|
|
+#define DMA_DISABLE_POLL 0x5000
|
|
+
|
|
+void disable_dma(unsigned int dmanr)
|
|
+{
|
|
+ int i;
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+ if (!chan)
|
|
+ return;
|
|
+ if (!__dmac_channel_enabled(dmanr))
|
|
+ return;
|
|
+
|
|
+ for (i = 0; i < DMA_DISABLE_POLL; i++)
|
|
+ if (__dmac_channel_transmit_end_detected(dmanr))
|
|
+ break;
|
|
+#if 0
|
|
+ if (i == DMA_DISABLE_POLL)
|
|
+ printk(KERN_INFO "disable_dma: poll expired!\n");
|
|
+#endif
|
|
+
|
|
+ __dmac_disable_channel(dmanr);
|
|
+ if (chan->irq)
|
|
+ __dmac_channel_disable_irq(dmanr);
|
|
+}
|
|
+
|
|
+/* note: DMA_MODE_MASK is simulated by sw, DCCSR_MODE_MASK mask hw bits */
|
|
+void set_dma_mode(unsigned int dmanr, unsigned int mode)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+ if (!chan)
|
|
+ return;
|
|
+ mode &= ~(DMAC_DCCSR_TC | DMAC_DCCSR_AR);
|
|
+ chan->mode |= mode & ~(DMAC_DCCSR_SAM | DMAC_DCCSR_EACKM | DMAC_DCCSR_DAM);
|
|
+ mode &= DMA_MODE_MASK;
|
|
+ if (mode == DMA_MODE_READ) {
|
|
+ chan->mode |= DMAC_DCCSR_DAM;
|
|
+ chan->mode &= ~DMAC_DCCSR_SAM;
|
|
+ } else if (mode == DMA_MODE_WRITE) {
|
|
+ chan->mode |= DMAC_DCCSR_SAM | DMAC_DCCSR_EACKM;
|
|
+ chan->mode &= ~DMAC_DCCSR_DAM;
|
|
+ } else {
|
|
+ printk(KERN_DEBUG "set_dma_mode() support DMA_MODE_READ or DMA_MODE_WRITE!\n");
|
|
+ }
|
|
+ REG_DMAC_DCCSR(chan->io) = chan->mode & ~DMA_MODE_MASK;
|
|
+ REG_DMAC_DRSR(chan->io) = chan->source;
|
|
+}
|
|
+
|
|
+void jz_set_oss_dma(unsigned int dmanr, unsigned int mode, unsigned int audio_fmt)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ switch (audio_fmt) {
|
|
+ case AFMT_U8:
|
|
+ /* SNDRV_PCM_FORMAT_S8 burst mode : 32BIT */
|
|
+ break;
|
|
+ case AFMT_S16_LE:
|
|
+ /* SNDRV_PCM_FORMAT_S16_LE burst mode : 16BYTE */
|
|
+ if (mode == DMA_MODE_READ) {
|
|
+ mode &= ~(DMAC_DCCSR_TC | DMAC_DCCSR_AR);
|
|
+ chan->mode = DMA_AIC_32_16BYTE_RX_CMD | DMA_MODE_READ;
|
|
+ chan->mode |= mode & ~(DMAC_DCCSR_SAM | DMAC_DCCSR_EACKM | DMAC_DCCSR_DAM);
|
|
+ mode &= DMA_MODE_MASK;
|
|
+ chan->mode |= DMAC_DCCSR_DAM;
|
|
+ chan->mode &= ~DMAC_DCCSR_SAM;
|
|
+ } else if (mode == DMA_MODE_WRITE) {
|
|
+ mode &= ~(DMAC_DCCSR_TC | DMAC_DCCSR_AR);
|
|
+ chan->mode = DMA_AIC_32_16BYTE_TX_CMD | DMA_MODE_WRITE;
|
|
+ chan->mode |= mode & ~(DMAC_DCCSR_SAM | DMAC_DCCSR_EACKM |DMAC_DCCSR_DAM);
|
|
+ mode &= DMA_MODE_MASK;
|
|
+ chan->mode |= DMAC_DCCSR_SAM | DMAC_DCCSR_EACKM;
|
|
+ chan->mode &= ~DMAC_DCCSR_DAM;
|
|
+ } else
|
|
+ printk("jz_set_oss_dma() just supports DMA_MODE_READ or DMA_MODE_WRITE!\n");
|
|
+
|
|
+ REG_DMAC_DCCSR(chan->io) = chan->mode & ~DMA_MODE_MASK;
|
|
+ REG_DMAC_DRSR(chan->io) = chan->source;
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+void jz_set_alsa_dma(unsigned int dmanr, unsigned int mode, unsigned int audio_fmt)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ switch (audio_fmt) {
|
|
+ case 8:
|
|
+ /* SNDRV_PCM_FORMAT_S8 burst mode : 32BIT */
|
|
+ break;
|
|
+ case 16:
|
|
+ /* SNDRV_PCM_FORMAT_S16_LE burst mode : 16BYTE */
|
|
+ if (mode == DMA_MODE_READ) {
|
|
+ mode &= ~(DMAC_DCCSR_TC | DMAC_DCCSR_AR);
|
|
+ chan->mode = DMA_AIC_16BYTE_RX_CMD | DMA_MODE_READ;
|
|
+ chan->mode |= mode & ~(DMAC_DCCSR_SAM | DMAC_DCCSR_EACKM | DMAC_DCCSR_DAM);
|
|
+ mode &= DMA_MODE_MASK;
|
|
+ chan->mode |= DMAC_DCCSR_DAM;
|
|
+ chan->mode &= ~DMAC_DCCSR_SAM;
|
|
+ } else if (mode == DMA_MODE_WRITE) {
|
|
+ mode &= ~(DMAC_DCCSR_TC | DMAC_DCCSR_AR);
|
|
+ chan->mode = DMA_AIC_16BYTE_TX_CMD | DMA_MODE_WRITE;
|
|
+ chan->mode |= mode & ~(DMAC_DCCSR_SAM | DMAC_DCCSR_EACKM | DMAC_DCCSR_DAM);
|
|
+ mode &= DMA_MODE_MASK;
|
|
+ chan->mode |= DMAC_DCCSR_SAM | DMAC_DCCSR_EACKM;
|
|
+ chan->mode &= ~DMAC_DCCSR_DAM;
|
|
+ } else
|
|
+ printk("jz_set_alsa_dma() just supports DMA_MODE_READ or DMA_MODE_WRITE!\n");
|
|
+
|
|
+ REG_DMAC_DCCSR(chan->io) = chan->mode & ~DMA_MODE_MASK;
|
|
+ REG_DMAC_DRSR(chan->io) = chan->source;
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+void set_dma_addr(unsigned int dmanr, unsigned int a)
|
|
+{
|
|
+ unsigned int mode;
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+ if (!chan)
|
|
+ return;
|
|
+ mode = chan->mode & DMA_MODE_MASK;
|
|
+ if (mode == DMA_MODE_READ) {
|
|
+ REG_DMAC_DSAR(chan->io) = chan->fifo_addr;
|
|
+ REG_DMAC_DDAR(chan->io) = a;
|
|
+ } else if (mode == DMA_MODE_WRITE) {
|
|
+ REG_DMAC_DSAR(chan->io) = a;
|
|
+ REG_DMAC_DDAR(chan->io) = chan->fifo_addr;
|
|
+ } else
|
|
+ printk(KERN_DEBUG "Driver should call set_dma_mode() ahead set_dma_addr()!\n");
|
|
+}
|
|
+
|
|
+void set_dma_count(unsigned int dmanr, unsigned int count)
|
|
+{
|
|
+ unsigned int mode;
|
|
+ int dma_ds[] = {4, 1, 2, 16, 32};
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+ if (!chan)
|
|
+ return;
|
|
+ mode = (chan->mode & DMAC_DCCSR_DS_MASK) >> DMAC_DCCSR_DS_BIT;
|
|
+ count = count / dma_ds[mode];
|
|
+ REG_DMAC_DTCR(chan->io) = count;
|
|
+}
|
|
+
|
|
+int get_dma_residue(unsigned int dmanr)
|
|
+{
|
|
+ int count;
|
|
+ unsigned int mode;
|
|
+ int dma_ds[] = {4, 1, 2, 16, 32};
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+ if (!chan)
|
|
+ return 0;
|
|
+
|
|
+ mode = (chan->mode & DMAC_DCCSR_DS_MASK) >> DMAC_DCCSR_DS_BIT;
|
|
+ count = REG_DMAC_DTCR(chan->io);
|
|
+ count = count * dma_ds[mode];
|
|
+
|
|
+ return count;
|
|
+}
|
|
+
|
|
+EXPORT_SYMBOL(jz_dma_table);
|
|
+EXPORT_SYMBOL(jz_request_dma);
|
|
+EXPORT_SYMBOL(jz_free_dma);
|
|
+EXPORT_SYMBOL(jz_set_dma_src_width);
|
|
+EXPORT_SYMBOL(jz_set_dma_dest_width);
|
|
+EXPORT_SYMBOL(jz_set_dma_block_size);
|
|
+EXPORT_SYMBOL(jz_set_dma_mode);
|
|
+EXPORT_SYMBOL(set_dma_mode);
|
|
+EXPORT_SYMBOL(jz_set_oss_dma);
|
|
+EXPORT_SYMBOL(jz_set_alsa_dma);
|
|
+EXPORT_SYMBOL(set_dma_addr);
|
|
+EXPORT_SYMBOL(set_dma_count);
|
|
+EXPORT_SYMBOL(get_dma_residue);
|
|
+EXPORT_SYMBOL(enable_dma);
|
|
+EXPORT_SYMBOL(disable_dma);
|
|
+EXPORT_SYMBOL(dump_jz_dma_channel);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4730/i2c.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4730/i2c.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,214 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4730/i2c.c
|
|
+ *
|
|
+ * JZ4730 I2C APIs.
|
|
+ *
|
|
+ * Copyright (c) 2006-2007 Ingenic Semiconductor Inc.
|
|
+ * Author: <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/types.h>
|
|
+#include <linux/delay.h>
|
|
+#include <asm/uaccess.h>
|
|
+#include <asm/addrspace.h>
|
|
+
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+/* I2C protocol */
|
|
+#define I2C_READ 1
|
|
+#define I2C_WRITE 0
|
|
+
|
|
+#define TIMEOUT 1000
|
|
+
|
|
+/*
|
|
+ * I2C bus protocol basic routines
|
|
+ */
|
|
+static int i2c_put_data(unsigned char data)
|
|
+{
|
|
+ unsigned int timeout = TIMEOUT * 10;
|
|
+
|
|
+ __i2c_write(data);
|
|
+ __i2c_set_drf();
|
|
+ while (__i2c_check_drf() != 0);
|
|
+ while (!__i2c_transmit_ended());
|
|
+ while (!__i2c_received_ack() && timeout)
|
|
+ timeout--;
|
|
+
|
|
+ if (timeout)
|
|
+ return 0;
|
|
+ else
|
|
+ return -ETIMEDOUT;
|
|
+}
|
|
+
|
|
+static int i2c_get_data(unsigned char *data, int ack)
|
|
+{
|
|
+ int timeout = TIMEOUT*10;
|
|
+
|
|
+ if (!ack)
|
|
+ __i2c_send_nack();
|
|
+ else
|
|
+ __i2c_send_ack();
|
|
+
|
|
+ while (__i2c_check_drf() == 0 && timeout)
|
|
+ timeout--;
|
|
+
|
|
+ if (timeout) {
|
|
+ if (!ack)
|
|
+ __i2c_send_stop();
|
|
+ *data = __i2c_read();
|
|
+ __i2c_clear_drf();
|
|
+ return 0;
|
|
+ } else
|
|
+ return -ETIMEDOUT;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * I2C interface
|
|
+ */
|
|
+void i2c_open(void)
|
|
+{
|
|
+ __i2c_set_clk(jz_clocks.devclk, 10000); /* default 10 KHz */
|
|
+ __i2c_enable();
|
|
+}
|
|
+
|
|
+void i2c_close(void)
|
|
+{
|
|
+ udelay(300); /* wait for STOP goes over. */
|
|
+ __i2c_disable();
|
|
+}
|
|
+
|
|
+void i2c_setclk(unsigned int i2cclk)
|
|
+{
|
|
+ __i2c_set_clk(jz_clocks.devclk, i2cclk);
|
|
+}
|
|
+
|
|
+int i2c_lseek(unsigned char device, unsigned char offset)
|
|
+{
|
|
+ __i2c_send_nack(); /* Master does not send ACK, slave sends it */
|
|
+ __i2c_send_start();
|
|
+ if (i2c_put_data( (device << 1) | I2C_WRITE ) < 0)
|
|
+ goto device_err;
|
|
+ if (i2c_put_data(offset) < 0)
|
|
+ goto address_err;
|
|
+ return 0;
|
|
+ device_err:
|
|
+ printk(KERN_DEBUG "No I2C device (0x%02x) installed.\n", device);
|
|
+ __i2c_send_stop();
|
|
+ return -ENODEV;
|
|
+ address_err:
|
|
+ printk(KERN_DEBUG "No I2C device (0x%02x) response.\n", device);
|
|
+ __i2c_send_stop();
|
|
+ return -EREMOTEIO;
|
|
+}
|
|
+
|
|
+int i2c_read(unsigned char device, unsigned char *buf,
|
|
+ unsigned char address, int count)
|
|
+{
|
|
+ int cnt = count;
|
|
+ int timeout = 5;
|
|
+
|
|
+L_try_again:
|
|
+
|
|
+ if (timeout < 0)
|
|
+ goto L_timeout;
|
|
+
|
|
+ __i2c_send_nack(); /* Master does not send ACK, slave sends it */
|
|
+ __i2c_send_start();
|
|
+ if (i2c_put_data( (device << 1) | I2C_WRITE ) < 0)
|
|
+ goto device_werr;
|
|
+ if (i2c_put_data(address) < 0)
|
|
+ goto address_err;
|
|
+
|
|
+ __i2c_send_start();
|
|
+ if (i2c_put_data( (device << 1) | I2C_READ ) < 0)
|
|
+ goto device_rerr;
|
|
+ __i2c_send_ack(); /* Master sends ACK for continue reading */
|
|
+ while (cnt) {
|
|
+ if (cnt == 1) {
|
|
+ if (i2c_get_data(buf, 0) < 0)
|
|
+ break;
|
|
+ } else {
|
|
+ if (i2c_get_data(buf, 1) < 0)
|
|
+ break;
|
|
+ }
|
|
+ cnt--;
|
|
+ buf++;
|
|
+ }
|
|
+
|
|
+ __i2c_send_stop();
|
|
+ return count - cnt;
|
|
+ device_rerr:
|
|
+ device_werr:
|
|
+ address_err:
|
|
+ timeout --;
|
|
+ __i2c_send_stop();
|
|
+ goto L_try_again;
|
|
+
|
|
+L_timeout:
|
|
+ __i2c_send_stop();
|
|
+ printk("Read I2C device 0x%2x failed.\n", device);
|
|
+ return -ENODEV;
|
|
+}
|
|
+
|
|
+int i2c_write(unsigned char device, unsigned char *buf,
|
|
+ unsigned char address, int count)
|
|
+{
|
|
+ int cnt = count;
|
|
+ int cnt_in_pg;
|
|
+ int timeout = 5;
|
|
+ unsigned char *tmpbuf;
|
|
+ unsigned char tmpaddr;
|
|
+
|
|
+ __i2c_send_nack(); /* Master does not send ACK, slave sends it */
|
|
+
|
|
+ W_try_again:
|
|
+ if (timeout < 0)
|
|
+ goto W_timeout;
|
|
+
|
|
+ cnt = count;
|
|
+ tmpbuf = (unsigned char *)buf;
|
|
+ tmpaddr = address;
|
|
+
|
|
+ start_write_page:
|
|
+ cnt_in_pg = 0;
|
|
+ __i2c_send_start();
|
|
+ if (i2c_put_data( (device << 1) | I2C_WRITE ) < 0)
|
|
+ goto device_err;
|
|
+ if (i2c_put_data(tmpaddr) < 0)
|
|
+ goto address_err;
|
|
+ while (cnt) {
|
|
+ if (++cnt_in_pg > 8) {
|
|
+ __i2c_send_stop();
|
|
+ mdelay(1);
|
|
+ tmpaddr += 8;
|
|
+ goto start_write_page;
|
|
+ }
|
|
+ if (i2c_put_data(*tmpbuf) < 0)
|
|
+ break;
|
|
+ cnt--;
|
|
+ tmpbuf++;
|
|
+ }
|
|
+ __i2c_send_stop();
|
|
+ return count - cnt;
|
|
+ device_err:
|
|
+ address_err:
|
|
+ timeout--;
|
|
+ __i2c_send_stop();
|
|
+ goto W_try_again;
|
|
+
|
|
+ W_timeout:
|
|
+ printk(KERN_DEBUG "Write I2C device 0x%2x failed.\n", device);
|
|
+ __i2c_send_stop();
|
|
+ return -ENODEV;
|
|
+}
|
|
+
|
|
+EXPORT_SYMBOL(i2c_open);
|
|
+EXPORT_SYMBOL(i2c_close);
|
|
+EXPORT_SYMBOL(i2c_setclk);
|
|
+EXPORT_SYMBOL(i2c_read);
|
|
+EXPORT_SYMBOL(i2c_write);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4730/irq.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4730/irq.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,266 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4730/irq.c
|
|
+ *
|
|
+ * JZ4730 interrupt routines.
|
|
+ *
|
|
+ * Copyright (c) 2006-2007 Ingenic Semiconductor Inc.
|
|
+ * Author: <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License as published by the
|
|
+ * Free Software Foundation; either version 2 of the License, or (at your
|
|
+ * option) any later version.
|
|
+ */
|
|
+#include <linux/errno.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/irq.h>
|
|
+#include <linux/kernel_stat.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/signal.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/types.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/timex.h>
|
|
+#include <linux/slab.h>
|
|
+#include <linux/random.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/bitops.h>
|
|
+
|
|
+#include <asm/bootinfo.h>
|
|
+#include <asm/io.h>
|
|
+#include <asm/mipsregs.h>
|
|
+#include <asm/system.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+/*
|
|
+ * INTC irq type
|
|
+ */
|
|
+
|
|
+static void enable_intc_irq(unsigned int irq)
|
|
+{
|
|
+ __intc_unmask_irq(irq);
|
|
+}
|
|
+
|
|
+static void disable_intc_irq(unsigned int irq)
|
|
+{
|
|
+ __intc_mask_irq(irq);
|
|
+}
|
|
+
|
|
+static void mask_and_ack_intc_irq(unsigned int irq)
|
|
+{
|
|
+ __intc_mask_irq(irq);
|
|
+ __intc_ack_irq(irq);
|
|
+}
|
|
+
|
|
+static void end_intc_irq(unsigned int irq)
|
|
+{
|
|
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
|
|
+ enable_intc_irq(irq);
|
|
+ }
|
|
+}
|
|
+
|
|
+static unsigned int startup_intc_irq(unsigned int irq)
|
|
+{
|
|
+ enable_intc_irq(irq);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void shutdown_intc_irq(unsigned int irq)
|
|
+{
|
|
+ disable_intc_irq(irq);
|
|
+}
|
|
+
|
|
+static struct irq_chip intc_irq_type = {
|
|
+ .typename = "INTC",
|
|
+ .startup = startup_intc_irq,
|
|
+ .shutdown = shutdown_intc_irq,
|
|
+ .enable = enable_intc_irq,
|
|
+ .disable = disable_intc_irq,
|
|
+ .ack = mask_and_ack_intc_irq,
|
|
+ .end = end_intc_irq,
|
|
+};
|
|
+
|
|
+/*
|
|
+ * GPIO irq type
|
|
+ */
|
|
+
|
|
+static void enable_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ unsigned int intc_irq;
|
|
+
|
|
+ if (irq < (IRQ_GPIO_0 + 32)) {
|
|
+ intc_irq = IRQ_GPIO0;
|
|
+ }
|
|
+ else if (irq < (IRQ_GPIO_0 + 64)) {
|
|
+ intc_irq = IRQ_GPIO1;
|
|
+ }
|
|
+ else if (irq < (IRQ_GPIO_0 + 96)) {
|
|
+ intc_irq = IRQ_GPIO2;
|
|
+ }
|
|
+ else {
|
|
+ intc_irq = IRQ_GPIO3;
|
|
+ }
|
|
+
|
|
+ enable_intc_irq(intc_irq);
|
|
+ __gpio_unmask_irq(irq - IRQ_GPIO_0);
|
|
+}
|
|
+
|
|
+static void disable_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ __gpio_mask_irq(irq - IRQ_GPIO_0);
|
|
+}
|
|
+
|
|
+static void mask_and_ack_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ __gpio_mask_irq(irq - IRQ_GPIO_0);
|
|
+ __gpio_ack_irq(irq - IRQ_GPIO_0);
|
|
+}
|
|
+
|
|
+static void end_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
|
|
+ enable_gpio_irq(irq);
|
|
+ }
|
|
+}
|
|
+
|
|
+static unsigned int startup_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ enable_gpio_irq(irq);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void shutdown_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ disable_gpio_irq(irq);
|
|
+}
|
|
+
|
|
+static struct irq_chip gpio_irq_type = {
|
|
+ .typename = "GPIO",
|
|
+ .startup = startup_gpio_irq,
|
|
+ .shutdown = shutdown_gpio_irq,
|
|
+ .enable = enable_gpio_irq,
|
|
+ .disable = disable_gpio_irq,
|
|
+ .ack = mask_and_ack_gpio_irq,
|
|
+ .end = end_gpio_irq,
|
|
+};
|
|
+
|
|
+/*
|
|
+ * DMA irq type
|
|
+ */
|
|
+
|
|
+static void enable_dma_irq(unsigned int irq)
|
|
+{
|
|
+ __intc_unmask_irq(IRQ_DMAC);
|
|
+ __dmac_channel_enable_irq(irq - IRQ_DMA_0);
|
|
+}
|
|
+
|
|
+static void disable_dma_irq(unsigned int irq)
|
|
+{
|
|
+ __dmac_channel_disable_irq(irq - IRQ_DMA_0);
|
|
+}
|
|
+
|
|
+static void mask_and_ack_dma_irq(unsigned int irq)
|
|
+{
|
|
+ __intc_ack_irq(IRQ_DMAC);
|
|
+ __dmac_channel_disable_irq(irq - IRQ_DMA_0);
|
|
+}
|
|
+
|
|
+static void end_dma_irq(unsigned int irq)
|
|
+{
|
|
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
|
|
+ enable_dma_irq(irq);
|
|
+ }
|
|
+}
|
|
+
|
|
+static unsigned int startup_dma_irq(unsigned int irq)
|
|
+{
|
|
+ enable_dma_irq(irq);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void shutdown_dma_irq(unsigned int irq)
|
|
+{
|
|
+ disable_dma_irq(irq);
|
|
+}
|
|
+
|
|
+static struct irq_chip dma_irq_type = {
|
|
+ .typename = "DMA",
|
|
+ .startup = startup_dma_irq,
|
|
+ .shutdown = shutdown_dma_irq,
|
|
+ .enable = enable_dma_irq,
|
|
+ .disable = disable_dma_irq,
|
|
+ .ack = mask_and_ack_dma_irq,
|
|
+ .end = end_dma_irq,
|
|
+};
|
|
+
|
|
+//----------------------------------------------------------------------
|
|
+
|
|
+void __init arch_init_irq(void)
|
|
+{
|
|
+ int i;
|
|
+
|
|
+ clear_c0_status(0xff04); /* clear ERL */
|
|
+ set_c0_status(0x0400); /* set IP2 */
|
|
+
|
|
+ /* Set up INTC irq
|
|
+ */
|
|
+ for (i = 0; i < 32; i++) {
|
|
+ disable_intc_irq(i);
|
|
+ irq_desc[i].chip = &intc_irq_type;
|
|
+ }
|
|
+
|
|
+ /* Set up DMAC irq
|
|
+ */
|
|
+ for (i = 0; i < NUM_DMA; i++) {
|
|
+ disable_dma_irq(IRQ_DMA_0 + i);
|
|
+ irq_desc[IRQ_DMA_0 + i].chip = &dma_irq_type;
|
|
+ }
|
|
+
|
|
+ /* Set up GPIO irq
|
|
+ */
|
|
+ for (i = 0; i < NUM_GPIO; i++) {
|
|
+ disable_gpio_irq(IRQ_GPIO_0 + i);
|
|
+ irq_desc[IRQ_GPIO_0 + i].chip = &gpio_irq_type;
|
|
+ }
|
|
+}
|
|
+
|
|
+static int plat_real_irq(int irq)
|
|
+{
|
|
+ switch (irq) {
|
|
+ case IRQ_GPIO0:
|
|
+ irq = __gpio_group_irq(0) + IRQ_GPIO_0;
|
|
+ break;
|
|
+ case IRQ_GPIO1:
|
|
+ irq = __gpio_group_irq(1) + IRQ_GPIO_0 + 32;
|
|
+ break;
|
|
+ case IRQ_GPIO2:
|
|
+ irq = __gpio_group_irq(2) + IRQ_GPIO_0 + 64;
|
|
+ break;
|
|
+ case IRQ_GPIO3:
|
|
+ irq = __gpio_group_irq(3) + IRQ_GPIO_0 + 96;
|
|
+ break;
|
|
+ case IRQ_DMAC:
|
|
+ irq = __dmac_get_irq() + IRQ_DMA_0;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ return irq;
|
|
+}
|
|
+
|
|
+asmlinkage void plat_irq_dispatch(void)
|
|
+{
|
|
+ int irq = 0;
|
|
+ static unsigned long intc_ipr = 0;
|
|
+
|
|
+ intc_ipr |= REG_INTC_IPR;
|
|
+
|
|
+ if (!intc_ipr) return;
|
|
+
|
|
+ irq = ffs(intc_ipr) - 1;
|
|
+ intc_ipr &= ~(1<<irq);
|
|
+
|
|
+ irq = plat_real_irq(irq);
|
|
+
|
|
+ do_IRQ(irq);
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/jz4730/platform.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4730/platform.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,140 @@
|
|
+/*
|
|
+ * Platform device support for Jz4730 SoC.
|
|
+ *
|
|
+ * Copyright 2007, Peter <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This file is licensed under the terms of the GNU General Public
|
|
+ * License version 2. This program is licensed "as is" without any
|
|
+ * warranty of any kind, whether express or implied.
|
|
+ */
|
|
+#include <linux/device.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/resource.h>
|
|
+
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+/* OHCI (USB full speed host controller) */
|
|
+static struct resource jz_usb_ohci_resources[] = {
|
|
+ [0] = {
|
|
+ .start = CPHYSADDR(UHC_BASE), // phys addr for ioremap
|
|
+ .end = CPHYSADDR(UHC_BASE) + 0x10000 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = IRQ_UHC,
|
|
+ .end = IRQ_UHC,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+/* The dmamask must be set for OHCI to work */
|
|
+static u64 ohci_dmamask = ~(u32)0;
|
|
+
|
|
+static struct platform_device jz_usb_ohci_device = {
|
|
+ .name = "jz-ohci",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &ohci_dmamask,
|
|
+ .coherent_dma_mask = 0xffffffff,
|
|
+ },
|
|
+ .num_resources = ARRAY_SIZE(jz_usb_ohci_resources),
|
|
+ .resource = jz_usb_ohci_resources,
|
|
+};
|
|
+
|
|
+/*** LCD controller ***/
|
|
+static struct resource jz_lcd_resources[] = {
|
|
+ [0] = {
|
|
+ .start = CPHYSADDR(LCD_BASE),
|
|
+ .end = CPHYSADDR(LCD_BASE) + 0x10000 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = IRQ_LCD,
|
|
+ .end = IRQ_LCD,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ }
|
|
+};
|
|
+
|
|
+static u64 jz_lcd_dmamask = ~(u32)0;
|
|
+
|
|
+static struct platform_device jz_lcd_device = {
|
|
+ .name = "jz-lcd",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &jz_lcd_dmamask,
|
|
+ .coherent_dma_mask = 0xffffffff,
|
|
+ },
|
|
+ .num_resources = ARRAY_SIZE(jz_lcd_resources),
|
|
+ .resource = jz_lcd_resources,
|
|
+};
|
|
+
|
|
+/* UDC (USB gadget controller) */
|
|
+static struct resource jz_usb_gdt_resources[] = {
|
|
+ [0] = {
|
|
+ .start = CPHYSADDR(UDC_BASE),
|
|
+ .end = CPHYSADDR(UDC_BASE) + 0x10000 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = IRQ_UDC,
|
|
+ .end = IRQ_UDC,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static u64 udc_dmamask = ~(u32)0;
|
|
+
|
|
+static struct platform_device jz_usb_gdt_device = {
|
|
+ .name = "jz-udc",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &udc_dmamask,
|
|
+ .coherent_dma_mask = 0xffffffff,
|
|
+ },
|
|
+ .num_resources = ARRAY_SIZE(jz_usb_gdt_resources),
|
|
+ .resource = jz_usb_gdt_resources,
|
|
+};
|
|
+
|
|
+/** MMC/SD controller **/
|
|
+static struct resource jz_mmc_resources[] = {
|
|
+ [0] = {
|
|
+ .start = CPHYSADDR(MSC_BASE),
|
|
+ .end = CPHYSADDR(MSC_BASE) + 0x10000 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = IRQ_MSC,
|
|
+ .end = IRQ_MSC,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ }
|
|
+};
|
|
+
|
|
+static u64 jz_mmc_dmamask = ~(u32)0;
|
|
+
|
|
+static struct platform_device jz_mmc_device = {
|
|
+ .name = "jz-mmc",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &jz_mmc_dmamask,
|
|
+ .coherent_dma_mask = 0xffffffff,
|
|
+ },
|
|
+ .num_resources = ARRAY_SIZE(jz_mmc_resources),
|
|
+ .resource = jz_mmc_resources,
|
|
+};
|
|
+
|
|
+/* All */
|
|
+static struct platform_device *jz_platform_devices[] __initdata = {
|
|
+ &jz_usb_ohci_device,
|
|
+ &jz_lcd_device,
|
|
+ &jz_usb_gdt_device,
|
|
+ &jz_mmc_device,
|
|
+};
|
|
+
|
|
+static int __init jz_platform_init(void)
|
|
+{
|
|
+ return platform_add_devices(jz_platform_devices, ARRAY_SIZE(jz_platform_devices));
|
|
+}
|
|
+
|
|
+arch_initcall(jz_platform_init);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4730/pm.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4730/pm.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,1098 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4730/pm.c
|
|
+ *
|
|
+ * Jz4730 Power Management Routines
|
|
+ *
|
|
+ * Copyright 2005 Ingenic Semiconductor
|
|
+ * Wei Jianli <jlwei@ingenic.cn>
|
|
+ * Huang Lihong<lhhuang@ingenic.cn>
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ */
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/pm.h>
|
|
+#include <linux/pm_legacy.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/proc_fs.h>
|
|
+#include <linux/sysctl.h>
|
|
+
|
|
+#include <asm/cacheops.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+extern void jz_cpu_suspend(void);
|
|
+extern void jz_cpu_resume(void);
|
|
+
|
|
+static void jz_board_pm_suspend(void);
|
|
+
|
|
+#define SAVE(x,s) sleep_save[SLEEP_SAVE_##x] = REG##s(x)
|
|
+#define RESTORE(x,s) REG##s(x) = sleep_save[SLEEP_SAVE_##x]
|
|
+
|
|
+/*
|
|
+ * List of global jz4730 peripheral registers to preserve.
|
|
+ * More ones like core register and general purpose register values
|
|
+ * are preserved with the stack pointer in sleep.S.
|
|
+ */
|
|
+enum { SLEEP_SAVE_START = 0,
|
|
+
|
|
+ /* CPM */
|
|
+ SLEEP_SAVE_CPM_MSCR, SLEEP_SAVE_CPM_PLCR1,
|
|
+
|
|
+ /* WDT */
|
|
+ SLEEP_SAVE_WDT_WTCNT, SLEEP_SAVE_WDT_WTCSR,
|
|
+
|
|
+ /* OST */
|
|
+ SLEEP_SAVE_OST_TER,
|
|
+ SLEEP_SAVE_OST_TCSR0, SLEEP_SAVE_OST_TCSR1, SLEEP_SAVE_OST_TCSR2,
|
|
+ SLEEP_SAVE_OST_TRDR0, SLEEP_SAVE_OST_TRDR1, SLEEP_SAVE_OST_TRDR2,
|
|
+ SLEEP_SAVE_OST_TCNT0, SLEEP_SAVE_OST_TCNT1, SLEEP_SAVE_OST_TCNT2,
|
|
+
|
|
+ /* HARB */
|
|
+ SLEEP_SAVE_HARB_HAPOR, SLEEP_SAVE_HARB_HMCTR, SLEEP_SAVE_HARB_HMLTR,
|
|
+
|
|
+ /* EMC */
|
|
+ SLEEP_SAVE_EMC_SMCR0, SLEEP_SAVE_EMC_SMCR1, SLEEP_SAVE_EMC_SMCR2, SLEEP_SAVE_EMC_SMCR3,
|
|
+ SLEEP_SAVE_EMC_SMCR4, SLEEP_SAVE_EMC_SMCR5,
|
|
+
|
|
+ /* GPIO */
|
|
+ SLEEP_SAVE_GPIO_GPDR0, SLEEP_SAVE_GPIO_GPDR1, SLEEP_SAVE_GPIO_GPDR2, SLEEP_SAVE_GPIO_GPDR3,
|
|
+ SLEEP_SAVE_GPIO_GPDIR0, SLEEP_SAVE_GPIO_GPDIR1, SLEEP_SAVE_GPIO_GPDIR2, SLEEP_SAVE_GPIO_GPDIR3,
|
|
+ SLEEP_SAVE_GPIO_GPODR0, SLEEP_SAVE_GPIO_GPODR1, SLEEP_SAVE_GPIO_GPODR2, SLEEP_SAVE_GPIO_GPODR3,
|
|
+ SLEEP_SAVE_GPIO_GPPUR0, SLEEP_SAVE_GPIO_GPPUR1, SLEEP_SAVE_GPIO_GPPUR2, SLEEP_SAVE_GPIO_GPPUR3,
|
|
+ SLEEP_SAVE_GPIO_GPALR0, SLEEP_SAVE_GPIO_GPALR1, SLEEP_SAVE_GPIO_GPALR2, SLEEP_SAVE_GPIO_GPALR3,
|
|
+ SLEEP_SAVE_GPIO_GPAUR0, SLEEP_SAVE_GPIO_GPAUR1, SLEEP_SAVE_GPIO_GPAUR2, SLEEP_SAVE_GPIO_GPAUR3,
|
|
+ SLEEP_SAVE_GPIO_GPIDLR0, SLEEP_SAVE_GPIO_GPIDLR1, SLEEP_SAVE_GPIO_GPIDLR2, SLEEP_SAVE_GPIO_GPIDLR3,
|
|
+ SLEEP_SAVE_GPIO_GPIDUR0, SLEEP_SAVE_GPIO_GPIDUR1, SLEEP_SAVE_GPIO_GPIDUR2, SLEEP_SAVE_GPIO_GPIDUR3,
|
|
+ SLEEP_SAVE_GPIO_GPIER0, SLEEP_SAVE_GPIO_GPIER1, SLEEP_SAVE_GPIO_GPIER2, SLEEP_SAVE_GPIO_GPIER3,
|
|
+ SLEEP_SAVE_GPIO_GPIMR0, SLEEP_SAVE_GPIO_GPIMR1, SLEEP_SAVE_GPIO_GPIMR2, SLEEP_SAVE_GPIO_GPIMR3,
|
|
+ SLEEP_SAVE_GPIO_GPFR0, SLEEP_SAVE_GPIO_GPFR1, SLEEP_SAVE_GPIO_GPFR2, SLEEP_SAVE_GPIO_GPFR3,
|
|
+
|
|
+ /* UART(0-3) */
|
|
+ SLEEP_SAVE_UART0_IER, SLEEP_SAVE_UART0_LCR, SLEEP_SAVE_UART0_MCR, SLEEP_SAVE_UART0_SPR, SLEEP_SAVE_UART0_DLLR, SLEEP_SAVE_UART0_DLHR,
|
|
+ SLEEP_SAVE_UART1_IER, SLEEP_SAVE_UART1_LCR, SLEEP_SAVE_UART1_MCR, SLEEP_SAVE_UART1_SPR, SLEEP_SAVE_UART1_DLLR, SLEEP_SAVE_UART1_DLHR,
|
|
+ SLEEP_SAVE_UART2_IER, SLEEP_SAVE_UART2_LCR, SLEEP_SAVE_UART2_MCR, SLEEP_SAVE_UART2_SPR, SLEEP_SAVE_UART2_DLLR, SLEEP_SAVE_UART2_DLHR,
|
|
+ SLEEP_SAVE_UART3_IER, SLEEP_SAVE_UART3_LCR, SLEEP_SAVE_UART3_MCR, SLEEP_SAVE_UART3_SPR, SLEEP_SAVE_UART3_DLLR, SLEEP_SAVE_UART3_DLHR,
|
|
+
|
|
+ /* DMAC */
|
|
+ SLEEP_SAVE_DMAC_DMACR,
|
|
+ SLEEP_SAVE_DMAC_DSAR0, SLEEP_SAVE_DMAC_DSAR1, SLEEP_SAVE_DMAC_DSAR2, SLEEP_SAVE_DMAC_DSAR3, SLEEP_SAVE_DMAC_DSAR4, SLEEP_SAVE_DMAC_DSAR5, SLEEP_SAVE_DMAC_DSAR6, SLEEP_SAVE_DMAC_DSAR7,
|
|
+ SLEEP_SAVE_DMAC_DDAR0, SLEEP_SAVE_DMAC_DDAR1, SLEEP_SAVE_DMAC_DDAR2, SLEEP_SAVE_DMAC_DDAR3, SLEEP_SAVE_DMAC_DDAR4, SLEEP_SAVE_DMAC_DDAR5, SLEEP_SAVE_DMAC_DDAR6, SLEEP_SAVE_DMAC_DDAR7,
|
|
+ SLEEP_SAVE_DMAC_DTCR0, SLEEP_SAVE_DMAC_DTCR1, SLEEP_SAVE_DMAC_DTCR2, SLEEP_SAVE_DMAC_DTCR3, SLEEP_SAVE_DMAC_DTCR4, SLEEP_SAVE_DMAC_DTCR5, SLEEP_SAVE_DMAC_DTCR6, SLEEP_SAVE_DMAC_DTCR7,
|
|
+ SLEEP_SAVE_DMAC_DRSR0, SLEEP_SAVE_DMAC_DRSR1, SLEEP_SAVE_DMAC_DRSR2, SLEEP_SAVE_DMAC_DRSR3, SLEEP_SAVE_DMAC_DRSR4, SLEEP_SAVE_DMAC_DRSR5, SLEEP_SAVE_DMAC_DRSR6, SLEEP_SAVE_DMAC_DRSR7,
|
|
+ SLEEP_SAVE_DMAC_DCCSR0, SLEEP_SAVE_DMAC_DCCSR1, SLEEP_SAVE_DMAC_DCCSR2, SLEEP_SAVE_DMAC_DCCSR3, SLEEP_SAVE_DMAC_DCCSR4, SLEEP_SAVE_DMAC_DCCSR5, SLEEP_SAVE_DMAC_DCCSR6, SLEEP_SAVE_DMAC_DCCSR7,
|
|
+
|
|
+ /* INTC */
|
|
+ SLEEP_SAVE_INTC_IPR, SLEEP_SAVE_INTC_ISR, SLEEP_SAVE_INTC_IMR,
|
|
+
|
|
+ /* Checksum */
|
|
+ SLEEP_SAVE_CKSUM,
|
|
+
|
|
+ SLEEP_SAVE_SIZE
|
|
+};
|
|
+
|
|
+static unsigned long sleep_save[SLEEP_SAVE_SIZE];
|
|
+
|
|
+static int jz_pm_do_suspend(void)
|
|
+{
|
|
+ unsigned long checksum = 0;
|
|
+ unsigned long imr = REG_INTC_IMR;
|
|
+ int i;
|
|
+
|
|
+ printk("Put cpu into suspend mode.\n");
|
|
+
|
|
+ /* Mask all interrupts */
|
|
+ REG_INTC_IMSR = 0xffffffff;
|
|
+
|
|
+ /* Preserve current time */
|
|
+ REG_RTC_RSR = xtime.tv_sec;
|
|
+
|
|
+ REG_CPM_OCR |= CPM_OCR_SUSPEND_PHY0; /* suspend USB PHY 0 */
|
|
+ REG_CPM_OCR |= CPM_OCR_SUSPEND_PHY1; /* suspend USB PHY 1 */
|
|
+ REG_CPM_OCR |= CPM_OCR_EXT_RTC_CLK; /* select the external RTC clock (32.768KHz) */
|
|
+
|
|
+ /* Disable NAND ctroller */
|
|
+ REG_EMC_NFCSR &= ~(EMC_NFCSR_NFE | EMC_NFCSR_FCE);
|
|
+
|
|
+ /*
|
|
+ * Temporary solution. This won't be necessary once
|
|
+ * we move this support into the device drivers.
|
|
+ * Save the on-chip modules
|
|
+ */
|
|
+ SAVE(UART0_LCR, 8); SAVE(UART0_MCR, 8); SAVE(UART0_SPR, 8);
|
|
+ REG8(UART0_LCR) |= UARTLCR_DLAB; /* Access to DLLR/DLHR */
|
|
+ SAVE(UART0_DLLR, 8); SAVE(UART0_DLHR, 8);
|
|
+ REG8(UART0_LCR) &= ~UARTLCR_DLAB; /* Access to IER */
|
|
+ SAVE(UART0_IER, 8);
|
|
+
|
|
+ SAVE(UART1_LCR, 8); SAVE(UART1_MCR, 8); SAVE(UART1_SPR, 8);
|
|
+ REG8(UART1_LCR) |= UARTLCR_DLAB; /* Access to DLLR/DLHR */
|
|
+ SAVE(UART1_DLLR, 8); SAVE(UART1_DLHR, 8);
|
|
+ REG8(UART1_LCR) &= ~UARTLCR_DLAB; /* Access to IER */
|
|
+ SAVE(UART1_IER, 8);
|
|
+
|
|
+ SAVE(UART2_LCR, 8); SAVE(UART2_MCR, 8); SAVE(UART2_SPR, 8);
|
|
+ REG8(UART2_LCR) |= UARTLCR_DLAB; /* Access to DLLR/DLHR */
|
|
+ SAVE(UART2_DLLR, 8); SAVE(UART2_DLHR, 8);
|
|
+ REG8(UART2_LCR) &= ~UARTLCR_DLAB; /* Access to IER */
|
|
+ SAVE(UART2_IER, 8);
|
|
+
|
|
+ SAVE(UART3_LCR, 8); SAVE(UART3_MCR, 8); SAVE(UART3_SPR, 8);
|
|
+ REG8(UART3_LCR) |= UARTLCR_DLAB; /* Access to DLLR/DLHR */
|
|
+ SAVE(UART3_DLLR, 8); SAVE(UART3_DLHR, 8);
|
|
+ REG8(UART3_LCR) &= ~UARTLCR_DLAB; /* Access to IER */
|
|
+ SAVE(UART3_IER, 8);
|
|
+
|
|
+ /* Save vital registers */
|
|
+
|
|
+ SAVE(OST_TER, 8);
|
|
+ SAVE(OST_TCSR0, 16); SAVE(OST_TCSR1, 16); SAVE(OST_TCSR2, 16);
|
|
+ SAVE(OST_TRDR0, 32); SAVE(OST_TRDR1, 32); SAVE(OST_TRDR2, 32);
|
|
+ SAVE(OST_TCNT0, 32); SAVE(OST_TCNT1, 32); SAVE(OST_TCNT2, 32);
|
|
+
|
|
+ SAVE(HARB_HAPOR, 32); SAVE(HARB_HMCTR, 32); SAVE(HARB_HMLTR, 32);
|
|
+
|
|
+ SAVE(EMC_SMCR0, 32); SAVE(EMC_SMCR1, 32); SAVE(EMC_SMCR2, 32); SAVE(EMC_SMCR3, 32);
|
|
+ SAVE(EMC_SMCR4, 32); SAVE(EMC_SMCR5, 32);
|
|
+
|
|
+ SAVE(GPIO_GPDR0, 32); SAVE(GPIO_GPDR1, 32); SAVE(GPIO_GPDR2, 32);
|
|
+ SAVE(GPIO_GPDR3, 32);
|
|
+ SAVE(GPIO_GPDIR0, 32); SAVE(GPIO_GPDIR1, 32); SAVE(GPIO_GPDIR2, 32);
|
|
+ SAVE(GPIO_GPDIR3, 32);
|
|
+ SAVE(GPIO_GPODR0, 32); SAVE(GPIO_GPODR1, 32); SAVE(GPIO_GPODR2, 32);
|
|
+ SAVE(GPIO_GPODR3, 32);
|
|
+ SAVE(GPIO_GPPUR0, 32); SAVE(GPIO_GPPUR1, 32); SAVE(GPIO_GPPUR2, 32);
|
|
+ SAVE(GPIO_GPPUR3, 32);
|
|
+ SAVE(GPIO_GPALR0, 32); SAVE(GPIO_GPALR1, 32); SAVE(GPIO_GPALR2, 32);
|
|
+ SAVE(GPIO_GPALR3, 32);
|
|
+ SAVE(GPIO_GPAUR0, 32); SAVE(GPIO_GPAUR1, 32); SAVE(GPIO_GPAUR2, 32);
|
|
+ SAVE(GPIO_GPAUR3, 32);
|
|
+ SAVE(GPIO_GPIDLR0, 32); SAVE(GPIO_GPIDLR1, 32); SAVE(GPIO_GPIDLR2, 32);
|
|
+ SAVE(GPIO_GPIDLR3, 32);
|
|
+ SAVE(GPIO_GPIDUR0, 32); SAVE(GPIO_GPIDUR1, 32); SAVE(GPIO_GPIDUR2, 32);
|
|
+ SAVE(GPIO_GPIDUR3, 32);
|
|
+ SAVE(GPIO_GPIER0, 32); SAVE(GPIO_GPIER1, 32); SAVE(GPIO_GPIER2, 32);
|
|
+ SAVE(GPIO_GPIER3, 32);
|
|
+ SAVE(GPIO_GPIMR0, 32); SAVE(GPIO_GPIMR1, 32); SAVE(GPIO_GPIMR2, 32);
|
|
+ SAVE(GPIO_GPIMR3, 32);
|
|
+ SAVE(GPIO_GPFR0, 32); SAVE(GPIO_GPFR1, 32); SAVE(GPIO_GPFR2, 32);
|
|
+ SAVE(GPIO_GPFR3, 32);
|
|
+
|
|
+ SAVE(DMAC_DMACR, 32);
|
|
+ SAVE(DMAC_DSAR0, 32); SAVE(DMAC_DSAR1, 32); SAVE(DMAC_DSAR2, 32); SAVE(DMAC_DSAR3, 32); SAVE(DMAC_DSAR4, 32); SAVE(DMAC_DSAR5, 32); SAVE(DMAC_DSAR6, 32); SAVE(DMAC_DSAR7, 32);
|
|
+ SAVE(DMAC_DDAR0, 32); SAVE(DMAC_DDAR1, 32); SAVE(DMAC_DDAR2, 32); SAVE(DMAC_DDAR3, 32); SAVE(DMAC_DDAR4, 32); SAVE(DMAC_DDAR5, 32); SAVE(DMAC_DDAR6, 32); SAVE(DMAC_DDAR7, 32);
|
|
+ SAVE(DMAC_DTCR0, 32); SAVE(DMAC_DTCR1, 32); SAVE(DMAC_DTCR2, 32); SAVE(DMAC_DTCR3, 32); SAVE(DMAC_DTCR4, 32); SAVE(DMAC_DTCR5, 32); SAVE(DMAC_DTCR6, 32); SAVE(DMAC_DTCR7, 32);
|
|
+ SAVE(DMAC_DRSR0, 32); SAVE(DMAC_DRSR1, 32); SAVE(DMAC_DRSR2, 32); SAVE(DMAC_DRSR3, 32); SAVE(DMAC_DRSR4, 32); SAVE(DMAC_DRSR5, 32); SAVE(DMAC_DRSR6, 32); SAVE(DMAC_DRSR7, 32);
|
|
+ SAVE(DMAC_DCCSR0, 32); SAVE(DMAC_DCCSR1, 32); SAVE(DMAC_DCCSR2, 32); SAVE(DMAC_DCCSR3, 32); SAVE(DMAC_DCCSR4, 32); SAVE(DMAC_DCCSR5, 32); SAVE(DMAC_DCCSR6, 32); SAVE(DMAC_DCCSR7, 32);
|
|
+
|
|
+ SAVE(INTC_IPR, 32);SAVE(INTC_ISR, 32);SAVE(INTC_IMR, 32);
|
|
+
|
|
+ SAVE(WDT_WTCNT, 32);SAVE(WDT_WTCSR, 8);
|
|
+
|
|
+ /* Mask all interrupts */
|
|
+ REG_INTC_IMSR = 0xffffffff;
|
|
+
|
|
+ /* Save module clocks */
|
|
+ SAVE(CPM_MSCR, 32);
|
|
+
|
|
+ /* Save PLL */
|
|
+ SAVE(CPM_PLCR1, 32);
|
|
+
|
|
+ /* Stop module clocks */
|
|
+ __cpm_stop_uart0();
|
|
+ __cpm_stop_uart1();
|
|
+ __cpm_stop_uart2();
|
|
+ __cpm_stop_uart3();
|
|
+ __cpm_stop_uhc();
|
|
+ __cpm_stop_udc();
|
|
+ __cpm_stop_eth();
|
|
+ __cpm_stop_cim();
|
|
+ __cpm_stop_kbc();
|
|
+ __cpm_stop_scc();
|
|
+ __cpm_stop_ssi();
|
|
+ __cpm_stop_ost();
|
|
+
|
|
+ /* platform-specific pm routine */
|
|
+ jz_board_pm_suspend();
|
|
+
|
|
+ /* Clear previous reset status */
|
|
+ REG_CPM_RSTR &= ~(CPM_RSTR_HR | CPM_RSTR_WR | CPM_RSTR_SR);
|
|
+
|
|
+ /* Set resume return address */
|
|
+ REG_CPM_SPR = virt_to_phys(jz_cpu_resume);
|
|
+
|
|
+ /* Before sleeping, calculate and save a checksum */
|
|
+ for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++)
|
|
+ checksum += sleep_save[i];
|
|
+ sleep_save[SLEEP_SAVE_CKSUM] = checksum;
|
|
+
|
|
+ /* *** go zzz *** */
|
|
+ jz_cpu_suspend();
|
|
+#if 0
|
|
+ /* after sleeping, validate the checksum */
|
|
+ checksum = 0;
|
|
+ for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++)
|
|
+ checksum += sleep_save[i];
|
|
+
|
|
+ /* if invalid, display message and wait for a hardware reset */
|
|
+ if (checksum != sleep_save[SLEEP_SAVE_CKSUM]) {
|
|
+ /** Add platform-specific message display codes here **/
|
|
+ while (1);
|
|
+ }
|
|
+#endif
|
|
+ /* Restore PLL */
|
|
+ RESTORE(CPM_PLCR1, 32);
|
|
+
|
|
+ /* Restore module clocks */
|
|
+ RESTORE(CPM_MSCR, 32);
|
|
+
|
|
+ /* Ensure not to come back here if it wasn't intended */
|
|
+ REG_CPM_SPR = 0;
|
|
+
|
|
+ /* Restore registers */
|
|
+
|
|
+ RESTORE(GPIO_GPDR0, 32); RESTORE(GPIO_GPDR1, 32); RESTORE(GPIO_GPDR2, 32);
|
|
+ RESTORE(GPIO_GPDR3, 32);
|
|
+ RESTORE(GPIO_GPDIR0, 32); RESTORE(GPIO_GPDIR1, 32); RESTORE(GPIO_GPDIR2, 32);
|
|
+ RESTORE(GPIO_GPDIR3, 32);
|
|
+ RESTORE(GPIO_GPODR0, 32); RESTORE(GPIO_GPODR1, 32); RESTORE(GPIO_GPODR2, 32);
|
|
+ RESTORE(GPIO_GPODR3, 32);
|
|
+ RESTORE(GPIO_GPPUR0, 32); RESTORE(GPIO_GPPUR1, 32); RESTORE(GPIO_GPPUR2, 32);
|
|
+ RESTORE(GPIO_GPPUR3, 32);
|
|
+ RESTORE(GPIO_GPALR0, 32); RESTORE(GPIO_GPALR1, 32); RESTORE(GPIO_GPALR2, 32);
|
|
+ RESTORE(GPIO_GPALR3, 32);
|
|
+ RESTORE(GPIO_GPAUR0, 32); RESTORE(GPIO_GPAUR1, 32); RESTORE(GPIO_GPAUR2, 32);
|
|
+ RESTORE(GPIO_GPAUR3, 32);
|
|
+ RESTORE(GPIO_GPIDLR0, 32);RESTORE(GPIO_GPIDLR1, 32);RESTORE(GPIO_GPIDLR2, 32);
|
|
+ RESTORE(GPIO_GPIDLR3, 32);
|
|
+ RESTORE(GPIO_GPIDUR0, 32);RESTORE(GPIO_GPIDUR1, 32);RESTORE(GPIO_GPIDUR2, 32);
|
|
+ RESTORE(GPIO_GPIDUR3, 32);
|
|
+ RESTORE(GPIO_GPIER0, 32); RESTORE(GPIO_GPIER1, 32); RESTORE(GPIO_GPIER2, 32);
|
|
+ RESTORE(GPIO_GPIER3, 32);
|
|
+ RESTORE(GPIO_GPIMR0, 32); RESTORE(GPIO_GPIMR1, 32); RESTORE(GPIO_GPIMR2, 32);
|
|
+ RESTORE(GPIO_GPIMR3, 32);
|
|
+ RESTORE(GPIO_GPFR0, 32); RESTORE(GPIO_GPFR1, 32); RESTORE(GPIO_GPFR2, 32);
|
|
+ RESTORE(GPIO_GPFR3, 32);
|
|
+
|
|
+ RESTORE(EMC_SMCR0, 32); RESTORE(EMC_SMCR1, 32); RESTORE(EMC_SMCR2, 32); RESTORE(EMC_SMCR3, 32);
|
|
+ RESTORE(EMC_SMCR4, 32); RESTORE(EMC_SMCR5, 32);
|
|
+
|
|
+ RESTORE(HARB_HAPOR, 32); RESTORE(HARB_HMCTR, 32); RESTORE(HARB_HMLTR, 32);
|
|
+
|
|
+ RESTORE(OST_TCNT0, 32); RESTORE(OST_TCNT1, 32); RESTORE(OST_TCNT2, 32);
|
|
+ RESTORE(OST_TRDR0, 32); RESTORE(OST_TRDR1, 32); RESTORE(OST_TRDR2, 32);
|
|
+ RESTORE(OST_TCSR0, 16); RESTORE(OST_TCSR1, 16); RESTORE(OST_TCSR2, 16);
|
|
+ RESTORE(OST_TER, 8);
|
|
+
|
|
+ RESTORE(DMAC_DMACR, 32);
|
|
+ RESTORE(DMAC_DSAR0, 32); RESTORE(DMAC_DSAR1, 32); RESTORE(DMAC_DSAR2, 32); RESTORE(DMAC_DSAR3, 32); RESTORE(DMAC_DSAR4, 32); RESTORE(DMAC_DSAR5, 32); RESTORE(DMAC_DSAR6, 32); RESTORE(DMAC_DSAR7, 32);
|
|
+ RESTORE(DMAC_DDAR0, 32); RESTORE(DMAC_DDAR1, 32); RESTORE(DMAC_DDAR2, 32); RESTORE(DMAC_DDAR3, 32); RESTORE(DMAC_DDAR4, 32); RESTORE(DMAC_DDAR5, 32); RESTORE(DMAC_DDAR6, 32); RESTORE(DMAC_DDAR7, 32);
|
|
+ RESTORE(DMAC_DTCR0, 32); RESTORE(DMAC_DTCR1, 32); RESTORE(DMAC_DTCR2, 32); RESTORE(DMAC_DTCR3, 32); RESTORE(DMAC_DTCR4, 32); RESTORE(DMAC_DTCR5, 32); RESTORE(DMAC_DTCR6, 32); RESTORE(DMAC_DTCR7, 32);
|
|
+ RESTORE(DMAC_DRSR0, 32); RESTORE(DMAC_DRSR1, 32); RESTORE(DMAC_DRSR2, 32); RESTORE(DMAC_DRSR3, 32); RESTORE(DMAC_DRSR4, 32); RESTORE(DMAC_DRSR5, 32); RESTORE(DMAC_DRSR6, 32); RESTORE(DMAC_DRSR7, 32);
|
|
+ RESTORE(DMAC_DCCSR0, 32); RESTORE(DMAC_DCCSR1, 32); RESTORE(DMAC_DCCSR2, 32); RESTORE(DMAC_DCCSR3, 32); RESTORE(DMAC_DCCSR4, 32); RESTORE(DMAC_DCCSR5, 32); RESTORE(DMAC_DCCSR6, 32); RESTORE(DMAC_DCCSR7, 32);
|
|
+
|
|
+ RESTORE(INTC_IPR, 32);RESTORE(INTC_ISR, 32);RESTORE(INTC_IMR, 32);
|
|
+
|
|
+ REG_WDT_WTCNT = 0; RESTORE(WDT_WTCSR, 8);
|
|
+
|
|
+ /*
|
|
+ * Temporary solution. This won't be necessary once
|
|
+ * we move this support into the device drivers.
|
|
+ * Restore the on-chip modules.
|
|
+ */
|
|
+
|
|
+ /* FIFO control reg, write-only */
|
|
+ REG8(UART0_FCR) = UARTFCR_FE | UARTFCR_RFLS | UARTFCR_TFLS | UARTFCR_UUE;
|
|
+ REG8(UART1_FCR) = UARTFCR_FE | UARTFCR_RFLS | UARTFCR_TFLS | UARTFCR_UUE;
|
|
+ REG8(UART2_FCR) = UARTFCR_FE | UARTFCR_RFLS | UARTFCR_TFLS | UARTFCR_UUE;
|
|
+ REG8(UART3_FCR) = UARTFCR_FE | UARTFCR_RFLS | UARTFCR_TFLS | UARTFCR_UUE;
|
|
+
|
|
+ REG8(UART0_LCR) |= UARTLCR_DLAB; /* Access to DLLR/DLHR */
|
|
+ RESTORE(UART0_DLLR, 8); RESTORE(UART0_DLHR, 8);
|
|
+ REG8(UART0_LCR) &= ~UARTLCR_DLAB; /* Access to IER */
|
|
+ RESTORE(UART0_IER, 8);
|
|
+ RESTORE(UART0_MCR, 8); RESTORE(UART0_SPR, 8); RESTORE(UART0_LCR, 8);
|
|
+
|
|
+ REG8(UART1_LCR) |= UARTLCR_DLAB; /* Access to DLLR/DLHR */
|
|
+ RESTORE(UART1_DLLR, 8); RESTORE(UART1_DLHR, 8);
|
|
+ REG8(UART1_LCR) &= ~UARTLCR_DLAB; /* Access to IER */
|
|
+ RESTORE(UART1_IER, 8);
|
|
+ RESTORE(UART1_MCR, 8); RESTORE(UART1_SPR, 8); RESTORE(UART1_LCR, 8);
|
|
+
|
|
+ REG8(UART2_LCR) |= UARTLCR_DLAB; /* Access to DLLR/DLHR */
|
|
+ RESTORE(UART2_DLLR, 8); RESTORE(UART2_DLHR, 8);
|
|
+ REG8(UART2_LCR) &= ~UARTLCR_DLAB; /* Access to IER */
|
|
+ RESTORE(UART2_IER, 8);
|
|
+ RESTORE(UART2_MCR, 8); RESTORE(UART2_SPR, 8); RESTORE(UART2_LCR, 8);
|
|
+
|
|
+ REG8(UART3_LCR) |= UARTLCR_DLAB; /* Access to DLLR/DLHR */
|
|
+ RESTORE(UART3_DLLR, 8); RESTORE(UART3_DLHR, 8);
|
|
+ REG8(UART3_LCR) &= ~UARTLCR_DLAB; /* Access to IER */
|
|
+ RESTORE(UART3_IER, 8);
|
|
+ RESTORE(UART3_MCR, 8); RESTORE(UART3_SPR, 8); RESTORE(UART3_LCR, 8);
|
|
+
|
|
+ REG_CPM_OCR &= ~CPM_OCR_SUSPEND_PHY0; /* resume USB PHY 0 */
|
|
+ REG_CPM_OCR &= ~CPM_OCR_SUSPEND_PHY1; /* resume USB PHY 1 */
|
|
+#if 0
|
|
+ REG_CPM_OCR &= ~CPM_OCR_EXT_RTC_CLK; /* use internal RTC clock (JZ_EXTAL/128 Hz) */
|
|
+#else
|
|
+ REG_CPM_OCR |= CPM_OCR_EXT_RTC_CLK; /* use external RTC clock (32.768 KHz) */
|
|
+#endif
|
|
+
|
|
+ /* Enable NAND ctroller */
|
|
+ REG_EMC_NFCSR |= EMC_NFCSR_NFE;
|
|
+
|
|
+ /* Restore current time */
|
|
+ xtime.tv_sec = REG_RTC_RSR;
|
|
+
|
|
+ /* Restore interrupts */
|
|
+ REG_INTC_IMSR = imr;
|
|
+ REG_INTC_IMCR = ~imr;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/* NOTES:
|
|
+ * 1: Pins that are floated (NC) should be set as input and pull-enable.
|
|
+ * 2: Pins that are pull-up or pull-down by outside should be set as input
|
|
+ * and pull-disable.
|
|
+ * 3: Pins that are connected to a chipset should be set as pull-disable.
|
|
+ */
|
|
+static void jz_board_pm_gpio_setup(void)
|
|
+{
|
|
+ /* CIM_D0(IN)/PULL-UP/GP0 */
|
|
+ __gpio_as_input(0);
|
|
+ __gpio_enable_pull(0);
|
|
+
|
|
+ /* CIM_D1(IN)/PULL-UP/GP1 */
|
|
+ __gpio_as_input(1);
|
|
+ __gpio_enable_pull(1);
|
|
+
|
|
+ /* CIM_D2(IN)/PULL-UP/GP2 */
|
|
+ __gpio_as_input(2);
|
|
+ __gpio_enable_pull(2);
|
|
+
|
|
+ /* CIM_D3(IN)/PULL-UP/GP3 */
|
|
+ __gpio_as_input(3);
|
|
+ __gpio_enable_pull(3);
|
|
+
|
|
+ /* CIM_D4(IN)/PULL-DOWN/GP4 */
|
|
+ __gpio_as_input(4);
|
|
+ __gpio_enable_pull(4);
|
|
+
|
|
+ /* CIM_D5(IN)/PULL-DOWN/GP5 */
|
|
+ __gpio_as_input(5);
|
|
+ __gpio_enable_pull(5);
|
|
+
|
|
+ /* CIM_D6(IN)/PULL-DOWN/GP6 */
|
|
+ __gpio_as_input(6);
|
|
+ __gpio_enable_pull(6);
|
|
+
|
|
+ /* CIM_D7(IN)/PULL-DOWN/GP7 */
|
|
+ __gpio_as_input(7);
|
|
+ __gpio_enable_pull(7);
|
|
+
|
|
+ /* CIM_VSYNC(IN)/PULL-DOWN/GP8 */
|
|
+ __gpio_as_input(8);
|
|
+ __gpio_enable_pull(8);
|
|
+
|
|
+ /* CIM_HSYNC(IN)/PULL-UP/GP9 */
|
|
+ __gpio_as_input(9);
|
|
+ __gpio_enable_pull(9);
|
|
+
|
|
+ /* CIM_PCLK(IN)/PULL-DOWN/GP10 */
|
|
+ __gpio_as_input(10);
|
|
+ __gpio_enable_pull(10);
|
|
+
|
|
+ /* CIM_MCLK(OUT)/PULL-DOWN/GP11 */
|
|
+ __gpio_as_input(11);
|
|
+ __gpio_enable_pull(11);
|
|
+
|
|
+ /* DMA_DREQ0(IN)/CHIP_MODE/PULL-UP/GP12 */
|
|
+ __gpio_as_input(12);
|
|
+ __gpio_enable_pull(12);
|
|
+
|
|
+ /* DMA_DACK0(OUT)/PULL-UP/GP13 */ /* GPIO13 */
|
|
+ __gpio_as_input(13);
|
|
+ __gpio_disable_pull(13);
|
|
+
|
|
+ /* GP14 */
|
|
+ /* GP15 */
|
|
+
|
|
+ /* RXD3(IN)/PULL-UP/GP16 */
|
|
+ __gpio_as_input(16);
|
|
+ __gpio_enable_pull(16);
|
|
+
|
|
+ /* CTS3(IN)/PULL-UP/GP17 */
|
|
+ __gpio_as_input(17);
|
|
+ __gpio_enable_pull(17);
|
|
+
|
|
+ /* GP18 */
|
|
+ /* GP19 */
|
|
+ /* GP20 */
|
|
+
|
|
+ /* TXD3(OUT)/PULL-UP/GP21 */
|
|
+ __gpio_as_input(21);
|
|
+ __gpio_enable_pull(21);
|
|
+
|
|
+ /* GP22 */
|
|
+
|
|
+ /* RTS3(OUT)/PULL-UP/GP23 */
|
|
+ __gpio_as_input(23);
|
|
+ __gpio_enable_pull(23);
|
|
+
|
|
+ /* RXD1(IN)/PULL-UP/GP24 */ /* IR_RXD */
|
|
+ __gpio_as_input(24);
|
|
+ __gpio_enable_pull(24);
|
|
+
|
|
+ /* TXD1(OUT)/PULL-UP/GP25 */ /* IR_TXD */
|
|
+ __gpio_disable_pull(25);
|
|
+ __gpio_as_output(25);
|
|
+ __cpm_set_pin(25);
|
|
+
|
|
+ /* DMA_AEN(OUT)/PULL-UP/GP26 */ /* CIM_PWD_N */
|
|
+ __gpio_as_input(26);
|
|
+ __gpio_disable_pull(26);
|
|
+
|
|
+ /* DMA_EOP(OUT)/PULL-UP/GP27 */ /* SW4 */
|
|
+ __gpio_as_input(27);
|
|
+ __gpio_disable_pull(27);
|
|
+
|
|
+ /* USB_CLK(IN)/PULL-UP/GP28 */
|
|
+ __gpio_as_input(28);
|
|
+ __gpio_disable_pull(28);
|
|
+
|
|
+ /* USB_PPWR0(OUT)/PULL-UP/GP29 */ /* USB_CLK_EN */
|
|
+ __gpio_disable_pull(29);
|
|
+ __gpio_as_output(29);
|
|
+ __cpm_clear_pin(29); /* disable USB 48MHz clock */
|
|
+
|
|
+ /* GP30 */
|
|
+ /* GP31 */
|
|
+
|
|
+ /* PS2_KCLK(IO)/PULL-UP/GP32 */
|
|
+ __gpio_as_input(32);
|
|
+ __gpio_enable_pull(32);
|
|
+
|
|
+ /* PS2_KDATA(IO)/PULL-UP/GP33 */ /* CIM_RST */
|
|
+ __gpio_as_input(33);
|
|
+ __gpio_enable_pull(33);
|
|
+
|
|
+ /* MSC_D0(IO)/PULL-UP/GP34 */
|
|
+ __gpio_as_input(34);
|
|
+ __gpio_disable_pull(34);
|
|
+
|
|
+ /* MSC_D1(IO)/PULL-UP/GP35 */
|
|
+ __gpio_as_input(35);
|
|
+ __gpio_disable_pull(35);
|
|
+
|
|
+ /* MSC_D2(IO)/PULL-UP/GP36 */
|
|
+ __gpio_as_input(36);
|
|
+ __gpio_disable_pull(36);
|
|
+
|
|
+ /* MSC_D3(IO)/PULL-UP/GP37 */
|
|
+ __gpio_as_input(37);
|
|
+ __gpio_disable_pull(37);
|
|
+
|
|
+ /* MSC_CMD(IO)/PULL-UP/GP38 */
|
|
+ __gpio_as_input(38);
|
|
+ __gpio_disable_pull(38);
|
|
+
|
|
+ /* MSC_CLK(OUT)/PULL-UP/GP39 */
|
|
+ __gpio_as_input(39);
|
|
+ __gpio_enable_pull(39);
|
|
+
|
|
+ /* LCD_D0(OUT)/PULL-UP/GP40 */
|
|
+ __gpio_as_input(40);
|
|
+ __gpio_enable_pull(40);
|
|
+
|
|
+ /* LCD_D1(OUT)/PULL-UP/GP41 */
|
|
+ __gpio_as_input(41);
|
|
+ __gpio_enable_pull(41);
|
|
+
|
|
+ /* LCD_D2(OUT)/PULL-UP/GP42 */
|
|
+ __gpio_as_input(42);
|
|
+ __gpio_enable_pull(42);
|
|
+
|
|
+ /* LCD_D3(OUT)/PULL-UP/GP43 */
|
|
+ __gpio_as_input(43);
|
|
+ __gpio_enable_pull(43);
|
|
+
|
|
+ /* LCD_D4(OUT)/PULL-UP/GP44 */
|
|
+ __gpio_as_input(44);
|
|
+ __gpio_enable_pull(44);
|
|
+
|
|
+ /* LCD_D5(OUT)/PULL-UP/GP45 */
|
|
+ __gpio_as_input(45);
|
|
+ __gpio_enable_pull(45);
|
|
+
|
|
+ /* LCD_D6(OUT)/PULL-UP/GP46 */
|
|
+ __gpio_as_input(46);
|
|
+ __gpio_enable_pull(46);
|
|
+
|
|
+ /* LCD_D7(OUT)/PULL-UP/GP47 */
|
|
+ __gpio_as_input(47);
|
|
+ __gpio_enable_pull(47);
|
|
+
|
|
+ /* LCD_D8(OUT)/PULL-DOWN/GP48 */
|
|
+ __gpio_as_input(48);
|
|
+ __gpio_enable_pull(48);
|
|
+
|
|
+ /* LCD_D9(OUT)/PULL-DOWN/GP49 */
|
|
+ __gpio_as_input(49);
|
|
+ __gpio_enable_pull(49);
|
|
+
|
|
+ /* LCD_D10(OUT)/PULL-DOWN/GP50 */
|
|
+ __gpio_as_input(50);
|
|
+ __gpio_enable_pull(50);
|
|
+
|
|
+ /* LCD_D11(OUT)/PULL-DOWN/GP51 */
|
|
+ __gpio_as_input(51);
|
|
+ __gpio_enable_pull(51);
|
|
+
|
|
+ /* LCD_D12(OUT)/PULL-DOWN/GP52 */
|
|
+ __gpio_as_input(52);
|
|
+ __gpio_enable_pull(52);
|
|
+
|
|
+ /* LCD_D13(OUT)/PULL-DOWN/GP53 */
|
|
+ __gpio_as_input(53);
|
|
+ __gpio_enable_pull(53);
|
|
+
|
|
+ /* LCD_D14(OUT)/PULL-DOWN/GP54 */
|
|
+ __gpio_as_input(54);
|
|
+ __gpio_enable_pull(54);
|
|
+
|
|
+ /* LCD_D15(OUT)/PULL-DOWN/GP55 */
|
|
+ __gpio_as_input(55);
|
|
+ __gpio_enable_pull(55);
|
|
+
|
|
+ /* LCD_VSYNC(IN)/PULL-DOWN/GP56 */
|
|
+ __gpio_as_input(56);
|
|
+ __gpio_enable_pull(56);
|
|
+
|
|
+ /* LCD_HSYNC(IN)/PULL-UP/GP57 */
|
|
+ __gpio_as_input(57);
|
|
+ __gpio_enable_pull(57);
|
|
+
|
|
+ /* LCD_PCLK(IN)/PULL-DOWN/GP58 */
|
|
+ __gpio_as_input(58);
|
|
+ __gpio_enable_pull(58);
|
|
+
|
|
+ /* LCD_DE(OUT)/PULL-DOWN/GP59 */
|
|
+ __gpio_as_input(59);
|
|
+ __gpio_enable_pull(59);
|
|
+
|
|
+ /* LCD_SPL(OUT)/PULL-UP/GP60 */
|
|
+ __gpio_as_input(60);
|
|
+ __gpio_disable_pull(60);
|
|
+
|
|
+ /* LCD_CLS(OUT)/PULL-UP/GP61 */
|
|
+ __gpio_as_input(61);
|
|
+ __gpio_disable_pull(61);
|
|
+
|
|
+ /* LCD_PS(OUT)/PULL-UP/GP62 */
|
|
+ __gpio_as_input(62);
|
|
+ __gpio_disable_pull(62);
|
|
+
|
|
+ /* LCD_REV(OUT)/PULL-UP/GP63 */
|
|
+ __gpio_as_input(63);
|
|
+ __gpio_enable_pull(63);
|
|
+
|
|
+ /* SCC0_DAT(IO)/PULL-UP/GP64 */ /* Keypad */
|
|
+ __gpio_as_input(64);
|
|
+ __gpio_enable_pull(64);
|
|
+
|
|
+ /* SCC1_DAT(IO)/PULL-UP/GP65 */ /* SW5 */
|
|
+ __gpio_as_input(65);
|
|
+ __gpio_disable_pull(65);
|
|
+
|
|
+ /* SCC0_CLK(OUT)/PULL-UP/GP66 */ /* PW_O */
|
|
+ __gpio_disable_pull(66);
|
|
+ __gpio_as_output(66);
|
|
+ __cpm_set_pin(66);
|
|
+
|
|
+ /* SCC1_CLK(OUT)/PULL-UP/GP67 */ /* SW6 */
|
|
+ __gpio_as_input(67);
|
|
+ __gpio_disable_pull(67);
|
|
+
|
|
+ /* SYS_CLK(OUT)/PULL-UP/GP68 */ /* I2S_CLK */
|
|
+ __gpio_disable_pull(68);
|
|
+
|
|
+ /* ACRESET_N(OUT)/PULL-UP/GP69 */ /* AK4642 PDN */
|
|
+ __gpio_disable_pull(69);
|
|
+ __gpio_as_output(69);
|
|
+ __cpm_clear_pin(69);
|
|
+
|
|
+ /* SDATA_OUT(OUT)/PULL-UP/GP70 */ /* I2S_DIN */
|
|
+ __gpio_disable_pull(70);
|
|
+
|
|
+ /* SDATA_IN(IN)/PULL-UP/GP71 */ /* I2S_DOUT */
|
|
+ __gpio_disable_pull(71);
|
|
+
|
|
+ /* SSI_CLK(OUT)/PULL-UP/GP72 */ /* SSI_CLK */
|
|
+ __gpio_as_input(72);
|
|
+ __gpio_enable_pull(72);
|
|
+
|
|
+ /* SSI_CE1_N(OUT)/PULL-UP/GP73 */ /* SSI_CE1_N */
|
|
+ __gpio_as_input(73);
|
|
+ __gpio_enable_pull(73);
|
|
+
|
|
+ /* SSI_DT(OUT)/PULL-UP/GP74 */ /* SSI_DT */
|
|
+ __gpio_as_input(74);
|
|
+ __gpio_enable_pull(74);
|
|
+
|
|
+ /* SSI_DR(IN)/PULL-UP/GP75 */ /* SSI_DR */
|
|
+ __gpio_as_input(75);
|
|
+ __gpio_enable_pull(75);
|
|
+
|
|
+ /* SSI_CE2_N(OUT)/SSI_GPC/PULL-UP/GP76 */
|
|
+ __gpio_as_input(76);
|
|
+ __gpio_enable_pull(76);
|
|
+
|
|
+ /* BITCLK_IN(IN)/PULL-UP/GP77 */ /* I2S_BITCLK */
|
|
+ __gpio_disable_pull(77);
|
|
+
|
|
+ /* SYNC_IN(IN)/PULL-UP/GP78 */ /* I2S_LRCIN */
|
|
+ __gpio_disable_pull(78);
|
|
+
|
|
+ /* FRE_N(OUT)/PULL-UP/GP79 */
|
|
+ __gpio_enable_pull(79);
|
|
+ __gpio_as_input(79);
|
|
+
|
|
+ /* FWE_N(OUT)/PULL-UP/GP80 */
|
|
+ __gpio_enable_pull(80);
|
|
+ __gpio_as_input(80);
|
|
+
|
|
+ /* FRB_N(IN)/PULL-UP/GP81 */
|
|
+ __gpio_enable_pull(81);
|
|
+ __gpio_as_input(81);
|
|
+
|
|
+ /* DCS1_N(OUT)/PULL-UP/GP82 */ /* SD_WP */
|
|
+ __gpio_as_input(82);
|
|
+ __gpio_enable_pull(82);
|
|
+
|
|
+ /* CS1_N(OUT)/PULL-UP/GP83 */ /* JACK_PLUG */
|
|
+ __gpio_as_input(83);
|
|
+ __gpio_disable_pull(83);
|
|
+
|
|
+ /* CS2_N(OUT)/PULL-UP/GP84 */ /* DC_DETE */
|
|
+ __gpio_as_input(84);
|
|
+ __gpio_disable_pull(84);
|
|
+
|
|
+ /* CS3_N(OUT)/PULL-UP/GP85 */ /* NAND CS# */
|
|
+ __gpio_enable_pull(85);
|
|
+ __gpio_as_input(85);
|
|
+
|
|
+ /* CS4_N/(OUT)PULL-UP/GP86 */ /* PULL_OFF */
|
|
+ __gpio_disable_pull(86);
|
|
+ __gpio_as_output(86);
|
|
+// __cpm_set_pin(86);
|
|
+ __cpm_clear_pin(86);
|
|
+
|
|
+ /* CS5_N(OUT)/PULL-UP/GP87 */ /* IR_SD */
|
|
+ __gpio_as_input(87);
|
|
+ __gpio_disable_pull(87);
|
|
+
|
|
+ /* INPACK_N(IN)/PULL-UP/GP88 */ /* SW7 */
|
|
+ __gpio_as_input(88);
|
|
+ __gpio_disable_pull(88);
|
|
+
|
|
+ /* BVD2(IN)/PULL-UP/GP89 */ /* SW8 */
|
|
+ __gpio_as_input(89);
|
|
+ __gpio_disable_pull(89);
|
|
+
|
|
+ /* PCE1_N(OUT)/PULL-UP/GP90 */ /* SD_CD_N */
|
|
+ __gpio_as_input(90);
|
|
+ __gpio_enable_pull(90);
|
|
+
|
|
+ /* PSKTSEL_N(OUT)/PULL-UP/GP91 */ /* SD_VCC_3V_EN_N */
|
|
+ __gpio_disable_pull(91);
|
|
+ __gpio_as_output(91);
|
|
+ __cpm_clear_pin(91);
|
|
+
|
|
+ /* IOIS16_N(IN)/PULL-UP/GP92 */ /* LED_EN */
|
|
+ __gpio_disable_pull(92);
|
|
+ __gpio_as_output(92);
|
|
+ __cpm_clear_pin(92);
|
|
+
|
|
+ /* PCE2_N(OUT)/PULL-UP/GP93 */ /* LCD_DISP_OFF_N */
|
|
+ __gpio_disable_pull(93);
|
|
+ __gpio_as_input(93);
|
|
+
|
|
+ /* PWM0(OUT)/PULL-UP/GP94 */ /* LCD backlight off */
|
|
+ __gpio_disable_pull(94);
|
|
+ __gpio_as_output(94);
|
|
+ __cpm_clear_pin(94);
|
|
+
|
|
+ /* PWM1(OUT)/PULL-UP/GP95 */
|
|
+ __gpio_disable_pull(95);
|
|
+ __gpio_as_output(95);
|
|
+ __cpm_clear_pin(95);
|
|
+
|
|
+ /* PRT(OUT)/PULL-UP/GP96 */ /* RTC_IRQ */
|
|
+ __gpio_as_input(96);
|
|
+ __gpio_disable_pull(96);
|
|
+
|
|
+ /* PRT(OUT)/PULL-UP/GP97 */ /* PW_I */
|
|
+ __gpio_as_input(97);
|
|
+ __gpio_disable_pull(97);
|
|
+
|
|
+ /* PRT(OUT)/PULL-UP/GP98 */ /* Keypad */
|
|
+ __gpio_as_input(98);
|
|
+ __gpio_disable_pull(98);
|
|
+
|
|
+ /* PRT(OUT)/PULL-UP/GP99 */ /* Keypad */
|
|
+ __gpio_as_input(99);
|
|
+ __gpio_disable_pull(99);
|
|
+
|
|
+ /* PRT(OUT)/PULL-UP/GP100 */ /* Keypad */
|
|
+ __gpio_as_input(100);
|
|
+ __gpio_disable_pull(100);
|
|
+
|
|
+ /* PRT(OUT)/PULL-UP/GP101 */ /* Keypad */
|
|
+ __gpio_as_input(101);
|
|
+ __gpio_disable_pull(101);
|
|
+
|
|
+ /* PRT(OUT)/PULL-UP/GP102 */ /* Keypad */
|
|
+ __gpio_as_input(102);
|
|
+ __gpio_disable_pull(102);
|
|
+
|
|
+ /* PRT(OUT)/PULL-UP/GP103 */ /* Keypad */
|
|
+ __gpio_as_input(103);
|
|
+ __gpio_enable_pull(103);
|
|
+
|
|
+ /* PRT(OUT)/PULL-UP/GP104 */ /* Keypad */
|
|
+ __gpio_as_input(104);
|
|
+ __gpio_enable_pull(104);
|
|
+
|
|
+ /* PRT(OUT)/PULL-UP/GP105 */ /* Keypad */
|
|
+ __gpio_as_input(105);
|
|
+ __gpio_enable_pull(105);
|
|
+
|
|
+ /* PRT(OUT)/PULL-UP/GP106 */ /* 5V_ON */
|
|
+ __gpio_disable_pull(106);
|
|
+ __gpio_as_output(106);
|
|
+ __cpm_clear_pin(106);
|
|
+
|
|
+ /* PRT(IN)/PULL-UP/GP107 */ /* GSM_BOOT */
|
|
+ __gpio_as_input(107);
|
|
+ __gpio_enable_pull(107);
|
|
+
|
|
+ /* PRT(IN)/PULL-UP/GP108 */ /* GSM_RESET */
|
|
+ __gpio_as_input(108);
|
|
+ __gpio_enable_pull(108);
|
|
+
|
|
+ /* PRT(IN)/PULL-UP/GP109 */ /* GSM_EN */
|
|
+ __gpio_as_input(109);
|
|
+ __gpio_enable_pull(109);
|
|
+
|
|
+ /* PRT(IN)/PULL-UP/GP110 */ /* GSM_RING */
|
|
+ __gpio_as_input(110);
|
|
+ __gpio_enable_pull(110);
|
|
+
|
|
+ /* PRT(IN)/UART2_RXD/PULL-UP/GP111 */ /* Keypad */
|
|
+ __gpio_as_input(111);
|
|
+ __gpio_enable_pull(111);
|
|
+
|
|
+ /* MII_TX_EN(OUT)/PULL-UP/GP112 */
|
|
+ __gpio_as_input(112);
|
|
+ __gpio_enable_pull(112);
|
|
+
|
|
+ /* MII_RX_DV(IN)/PULL-UP/GP113 */
|
|
+ __gpio_as_input(113);
|
|
+ __gpio_enable_pull(113);
|
|
+
|
|
+ /* MII_RX_ER(IN)/PULL-UP/GP114 */
|
|
+ __gpio_as_input(114);
|
|
+ __gpio_enable_pull(114);
|
|
+
|
|
+ /* MII_COL(IN)/PULL-UP/GP115 */
|
|
+ __gpio_as_input(115);
|
|
+ __gpio_enable_pull(115);
|
|
+
|
|
+ /* MII_CRS(IN)/PULL-UP/GP116 */
|
|
+ __gpio_as_input(116);
|
|
+ __gpio_enable_pull(116);
|
|
+
|
|
+ /* MII_TXD0(OUT)/PULL-UP/GP117 */
|
|
+ __gpio_as_input(117);
|
|
+ __gpio_enable_pull(117);
|
|
+
|
|
+ /* MII_TXD1(OUT)/PULL-UP/GP118 */
|
|
+ __gpio_as_input(118);
|
|
+ __gpio_enable_pull(118);
|
|
+
|
|
+ /* MII_TXD2(OUT)/PULL-UP/GP119 */
|
|
+ __gpio_as_input(119);
|
|
+ __gpio_enable_pull(119);
|
|
+
|
|
+ /* MII_TXD3(OUT)/PULL-UP/GP120 */
|
|
+ __gpio_as_input(120);
|
|
+ __gpio_enable_pull(120);
|
|
+
|
|
+ /* MII_RXD0(IN)/PULL-UP/GP121 */
|
|
+ __gpio_as_input(121);
|
|
+ __gpio_enable_pull(121);
|
|
+
|
|
+ /* MII_RXD1(IN)/PULL-UP/GP122 */
|
|
+ __gpio_as_input(122);
|
|
+ __gpio_enable_pull(122);
|
|
+
|
|
+ /* MII_RXD2(IN)/PULL-UP/GP123 */
|
|
+ __gpio_as_input(123);
|
|
+ __gpio_enable_pull(123);
|
|
+
|
|
+ /* MII_RXD3(IN)/PULL-UP/GP124 */
|
|
+ __gpio_as_input(124);
|
|
+ __gpio_enable_pull(124);
|
|
+
|
|
+ /* UART2_TXD(OUT)/PULL-UP/GP125 */ /* CHARG_STAT */
|
|
+ __gpio_as_output(125);
|
|
+ __gpio_disable_pull(125);
|
|
+ __cpm_clear_pin(125);
|
|
+
|
|
+ /* UART0_RXD(IN)/PULL-UP/GP126 */
|
|
+ __gpio_as_input(126);
|
|
+ __gpio_enable_pull(126);
|
|
+
|
|
+ /* UART0_TXD(OUT)/PULL-UP/GP127 */
|
|
+ __gpio_as_input(127);
|
|
+ __gpio_enable_pull(127);
|
|
+}
|
|
+
|
|
+/*
|
|
+ * In order to save power most, all gpio pins should be put to their
|
|
+ * proper states during low power mode.
|
|
+ */
|
|
+static void jz_board_pm_suspend(void)
|
|
+{
|
|
+ /* Setup the state of all the GPIO pins during low-power mode */
|
|
+ jz_board_pm_gpio_setup();
|
|
+
|
|
+ /* Allow next interrupts to wakeup the system.
|
|
+ */
|
|
+ REG_CPM_WER = 0; /* Clear all first */
|
|
+
|
|
+ /* RTC alarm */
|
|
+ REG_CPM_WER |= 1 << 0;
|
|
+ REG_CPM_WRER |= 1 << 0;
|
|
+ REG_CPM_WFER |= 1 << 0;
|
|
+ __gpio_as_irq_rise_edge(96);
|
|
+
|
|
+ /* Power_I key */
|
|
+ REG_CPM_WER |= 1 << 1;
|
|
+ REG_CPM_WRER |= 1 << 1;
|
|
+ REG_CPM_WFER |= 1 << 1;
|
|
+ __gpio_as_irq_rise_edge(97);
|
|
+
|
|
+ /* enable INTC irq */
|
|
+ __intc_unmask_irq(IRQ_GPIO3);
|
|
+
|
|
+#if 0
|
|
+ /* Enable RTC alarm */
|
|
+ REG_CPM_WER |= CPM_WER_WERTC;
|
|
+ REG_RTC_RGR = 32767;
|
|
+ REG_RTC_RCR &= ~RTC_RCR_AE;
|
|
+ REG_RTC_RSR = 0;
|
|
+ REG_RTC_RSAR = 30;
|
|
+ REG_RTC_RCR = RTC_RCR_AE | RTC_RCR_AIE | RTC_RCR_START;
|
|
+#endif
|
|
+}
|
|
+
|
|
+/*
|
|
+ * We don't use sleep mode of jz4730 for it has bug, the suspend mode
|
|
+ * implemented by hibernate mode is used instead of it.
|
|
+ */
|
|
+static int jz_pm_do_sleep(void)
|
|
+{
|
|
+ printk("It was deprecated, please use /proc/sys/pm/suspend.\n");
|
|
+#if 0
|
|
+ unsigned long imr = REG_INTC_IMR;
|
|
+
|
|
+ /* Preserve current time */
|
|
+ REG_RTC_RSR = xtime.tv_sec;
|
|
+
|
|
+ /* Mask all interrupts */
|
|
+ REG_INTC_IMSR = 0xffffffff;
|
|
+
|
|
+ /* Just allow next interrupts to wakeup the system.
|
|
+ * Note: modify this according to your system.
|
|
+ */
|
|
+ /* RTC alarm */
|
|
+ __gpio_as_irq_fall_edge(96); /* GPIO 96 */
|
|
+
|
|
+ /* POWER_I key */
|
|
+ __gpio_as_irq_rise_edge(97); /* GPIO 97 */
|
|
+
|
|
+ /* Enable INTC */
|
|
+ __intc_unmask_irq(IRQ_GPIO3);
|
|
+
|
|
+ /* Disable modules e.g. LCD backlight */
|
|
+
|
|
+ /* Stop module clocks */
|
|
+ __cpm_stop_uhc();
|
|
+
|
|
+ /* Enter SLEEP mode
|
|
+ * Put SDRAM into self-refresh mode.
|
|
+ */
|
|
+ REG_CPM_LPCR &= ~CPM_LPCR_LPM_MASK;
|
|
+ REG_CPM_LPCR |= CPM_LPCR_LPM_SLEEP;
|
|
+
|
|
+ __asm__(".set\tmips3\n\t"
|
|
+ ".set noreorder\n\t"
|
|
+ ".align 5\n\t"
|
|
+ "wait\n\t"
|
|
+ "nop\n\t"
|
|
+ ".set reorder\n\t"
|
|
+ ".set\tmips0");
|
|
+
|
|
+ /* Restore to IDLE mode */
|
|
+ REG_CPM_LPCR &= ~CPM_LPCR_LPM_MASK;
|
|
+ REG_CPM_LPCR |= CPM_LPCR_LPM_IDLE;
|
|
+
|
|
+ /* Restore clock of usb host */
|
|
+ __cpm_start_uhc();
|
|
+
|
|
+ /* Restore interrupts */
|
|
+ REG_INTC_IMSR = imr;
|
|
+ REG_INTC_IMCR = ~imr;
|
|
+
|
|
+ /* Restore current time */
|
|
+ xtime.tv_sec = REG_RTC_RSR;
|
|
+#endif
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+#define K0BASE KSEG0
|
|
+void jz_flush_cache_all(void)
|
|
+{
|
|
+ unsigned long addr;
|
|
+
|
|
+ /* Clear CP0 TagLo */
|
|
+ asm volatile ("mtc0 $0, $28\n\t"::);
|
|
+
|
|
+ for (addr = K0BASE; addr < (K0BASE + 0x4000); addr += 32) {
|
|
+ asm volatile (
|
|
+ ".set mips3\n\t"
|
|
+ " cache %0, 0(%1)\n\t"
|
|
+ ".set mips2\n\t"
|
|
+ :
|
|
+ : "I" (Index_Writeback_Inv_D), "r"(addr));
|
|
+
|
|
+ asm volatile (
|
|
+ ".set mips3\n\t"
|
|
+ " cache %0, 0(%1)\n\t"
|
|
+ ".set mips2\n\t"
|
|
+ :
|
|
+ : "I" (Index_Store_Tag_I), "r"(addr));
|
|
+ }
|
|
+
|
|
+ asm volatile ("sync\n\t"::);
|
|
+
|
|
+ /* invalidate BTB */
|
|
+ asm volatile (
|
|
+ ".set mips32\n\t"
|
|
+ " mfc0 %0, $16, 7\n\t"
|
|
+ " nop\n\t"
|
|
+ " ori $0, 2\n\t"
|
|
+ " mtc0 %0, $16, 7\n\t"
|
|
+ " nop\n\t"
|
|
+ ".set mips2\n\t"
|
|
+ :
|
|
+ : "r"(addr));
|
|
+}
|
|
+
|
|
+/* Put CPU to HIBERNATE mode */
|
|
+int jz_pm_suspend(void)
|
|
+{
|
|
+ int retval;
|
|
+
|
|
+ pm_send_all(PM_SUSPEND, (void *)3);
|
|
+
|
|
+ retval = jz_pm_do_suspend();
|
|
+
|
|
+ pm_send_all(PM_RESUME, (void *)0);
|
|
+
|
|
+ return retval;
|
|
+}
|
|
+
|
|
+#if 0
|
|
+/* Put CPU to SLEEP mode */
|
|
+int jz_pm_sleep(void)
|
|
+{
|
|
+ return jz_pm_do_sleep();
|
|
+}
|
|
+
|
|
+/* Put CPU to IDLE mode, used for dpm in linux 2.4 */
|
|
+void jz_pm_idle(void)
|
|
+{
|
|
+ local_irq_disable();
|
|
+ if (!need_resched()) {
|
|
+ local_irq_enable();
|
|
+ cpu_wait();
|
|
+ }
|
|
+}
|
|
+#endif
|
|
+
|
|
+#ifdef CONFIG_SYSCTL
|
|
+
|
|
+/*
|
|
+ * Use a temporary sysctl number. Horrid, but will be cleaned up in 2.6
|
|
+ * when all the PM interfaces exist nicely.
|
|
+ */
|
|
+#define CTL_PM_SUSPEND 1
|
|
+#define CTL_PM_HIBERNATE 2
|
|
+
|
|
+/*----------------------------------------------------------------------------
|
|
+ * Power Management sleep sysctl proc interface
|
|
+ *
|
|
+ * A write to /proc/sys/pm/suspend invokes this function
|
|
+ * which initiates a sleep.
|
|
+ *--------------------------------------------------------------------------*/
|
|
+static int sysctl_jz_pm_sleep(void)
|
|
+{
|
|
+ return jz_pm_suspend();
|
|
+}
|
|
+
|
|
+static struct ctl_table pm_table[] =
|
|
+{
|
|
+ {
|
|
+ .ctl_name = CTL_UNNUMBERED,
|
|
+ .procname = "suspend",
|
|
+ .data = NULL,
|
|
+ .maxlen = 0,
|
|
+ .mode = 0600,
|
|
+ .proc_handler = &sysctl_jz_pm_sleep,
|
|
+ },
|
|
+ { .ctl_name = 0}
|
|
+};
|
|
+
|
|
+static struct ctl_table pm_dir_table[] =
|
|
+{
|
|
+ {
|
|
+ .ctl_name = CTL_UNNUMBERED,
|
|
+ .procname = "pm",
|
|
+ .mode = 0555,
|
|
+ .child = pm_table,
|
|
+ },
|
|
+ { .ctl_name = 0}
|
|
+};
|
|
+
|
|
+#endif /* CONFIG_SYSCTL */
|
|
+
|
|
+/*
|
|
+ * Initialize power interface
|
|
+ */
|
|
+static int __init jz_pm_init(void)
|
|
+{
|
|
+ printk("Power Management for JZ\n");
|
|
+
|
|
+#ifdef CONFIG_SYSCTL
|
|
+ register_sysctl_table(pm_dir_table);
|
|
+#endif
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+module_init(jz_pm_init);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4730/proc.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4730/proc.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,292 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4730/proc.c
|
|
+ *
|
|
+ * /proc/jz/ procfs for on-chip peripherals.
|
|
+ *
|
|
+ * Copyright (c) 2006-2007 Ingenic Semiconductor Inc.
|
|
+ * Author: <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License as published by the
|
|
+ * Free Software Foundation; either version 2 of the License, or (at your
|
|
+ * option) any later version.
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/irq.h>
|
|
+#include <linux/sysctl.h>
|
|
+#include <linux/proc_fs.h>
|
|
+
|
|
+#include <asm/uaccess.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+struct proc_dir_entry *proc_jz_root;
|
|
+
|
|
+/*
|
|
+ * EMC Module
|
|
+ */
|
|
+static int emc_read_proc (char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+
|
|
+ len += sprintf (page+len, "BCR: 0x%08x\n", REG_EMC_BCR);
|
|
+ len += sprintf (page+len, "SMCR(0-5): 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", REG_EMC_SMCR0, REG_EMC_SMCR1, REG_EMC_SMCR2, REG_EMC_SMCR3, REG_EMC_SMCR4, REG_EMC_SMCR5);
|
|
+ len += sprintf (page+len, "SACR(0-5): 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", REG_EMC_SACR0, REG_EMC_SACR1, REG_EMC_SACR2, REG_EMC_SACR3, REG_EMC_SACR4, REG_EMC_SACR5);
|
|
+ len += sprintf (page+len, "DMCR: 0x%08x\n", REG_EMC_DMCR);
|
|
+ len += sprintf (page+len, "RTCSR: 0x%04x\n", REG_EMC_RTCSR);
|
|
+ len += sprintf (page+len, "RTCOR: 0x%04x\n", REG_EMC_RTCOR);
|
|
+ len += sprintf (page+len, "DMAR(0-1): 0x%08x 0x%08x\n", REG_EMC_DMAR1, REG_EMC_DMAR2);
|
|
+ return len;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Power Manager Module
|
|
+ */
|
|
+static int pmc_read_proc (char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+ unsigned long lpcr = REG_CPM_LPCR;
|
|
+ unsigned long mscr = REG_CPM_MSCR;
|
|
+
|
|
+ len += sprintf (page+len, "LPCR : 0x%08lx\n", lpcr);
|
|
+ len += sprintf (page+len, "Low Power Mode : %s\n",
|
|
+ ((lpcr & CPM_LPCR_LPM_MASK) == (CPM_LPCR_LPM_IDLE)) ?
|
|
+ "idle" : (((lpcr & CPM_LPCR_LPM_MASK) == (CPM_LPCR_LPM_SLEEP)) ? "sleep" : "hibernate"));
|
|
+ len += sprintf (page+len, "Doze Mode : %s\n",
|
|
+ (lpcr & CPM_LPCR_DOZE) ? "on" : "off");
|
|
+ if (lpcr & CPM_LPCR_DOZE)
|
|
+ len += sprintf (page+len, " duty : %d\n", (int)((lpcr & CPM_LPCR_DUTY_MASK) >> CPM_LPCR_DUTY_BIT));
|
|
+ len += sprintf (page+len, "CKO1 : %s\n",
|
|
+ (REG_CPM_CFCR & CPM_CFCR_CKOEN1) ? "enable" : "disable");
|
|
+ len += sprintf (page+len, "UART0 : %s\n",
|
|
+ (mscr & CPM_MSCR_MSTP_UART0) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "UART1 : %s\n",
|
|
+ (mscr & CPM_MSCR_MSTP_UART1) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "UART2 : %s\n",
|
|
+ (mscr & CPM_MSCR_MSTP_UART2) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "UART3 : %s\n",
|
|
+ (mscr & CPM_MSCR_MSTP_UART3) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "OST : %s\n",
|
|
+ (mscr & CPM_MSCR_MSTP_OST) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "DMAC : %s\n",
|
|
+ (mscr & CPM_MSCR_MSTP_DMAC) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "ETH : %s\n",
|
|
+ (mscr & CPM_MSCR_MSTP_ETH) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "UHC/UDC : %s\n",
|
|
+ (mscr & CPM_MSCR_MSTP_UHC) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "PWM0 : %s\n",
|
|
+ (mscr & CPM_MSCR_MSTP_PWM0) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "PWM1 : %s\n",
|
|
+ (mscr & CPM_MSCR_MSTP_PWM1) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "I2C : %s\n",
|
|
+ (mscr & CPM_MSCR_MSTP_I2C) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "SSI : %s\n",
|
|
+ (mscr & CPM_MSCR_MSTP_SSI) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "SCC : %s\n",
|
|
+ (mscr & CPM_MSCR_MSTP_SCC) ? "stopped" : "running");
|
|
+ return len;
|
|
+}
|
|
+
|
|
+static int pmc_write_proc(struct file *file, const char __user *buffer, unsigned long count, void *data)
|
|
+{
|
|
+ REG_CPM_MSCR = simple_strtoul(buffer, 0, 16);
|
|
+ return count;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Clock Generation Module
|
|
+ */
|
|
+static int cgm_read_proc (char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+ unsigned int cfcr = REG_CPM_CFCR;
|
|
+ unsigned int plcr1 = REG_CPM_PLCR1;
|
|
+ unsigned int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
|
|
+ unsigned int od[4] = {1, 2, 2, 4};
|
|
+
|
|
+
|
|
+ len += sprintf (page+len, "PLCR1 : 0x%08x\n", plcr1);
|
|
+ len += sprintf (page+len, "CFCR : 0x%08x\n", cfcr);
|
|
+ len += sprintf (page+len, "PLL : %s\n",
|
|
+ (plcr1 & CPM_PLCR1_PLL1EN) ? "ON" : "OFF");
|
|
+ len += sprintf (page+len, "NF:NR:NO : %d:%d:%d\n",
|
|
+ __cpm_plcr1_fd() + 2,
|
|
+ __cpm_plcr1_rd() + 2,
|
|
+ od[__cpm_plcr1_od()]
|
|
+ );
|
|
+ len += sprintf (page+len, "I:S:M:P : %d:%d:%d:%d\n",
|
|
+ div[(cfcr & CPM_CFCR_IFR_MASK) >> CPM_CFCR_IFR_BIT],
|
|
+ div[(cfcr & CPM_CFCR_SFR_MASK) >> CPM_CFCR_SFR_BIT],
|
|
+ div[(cfcr & CPM_CFCR_MFR_MASK) >> CPM_CFCR_MFR_BIT],
|
|
+ div[(cfcr & CPM_CFCR_PFR_MASK) >> CPM_CFCR_PFR_BIT]
|
|
+ );
|
|
+ len += sprintf (page+len, "PLL Freq : %d MHz\n", __cpm_get_pllout()/1000000);
|
|
+ len += sprintf (page+len, "ICLK : %d MHz\n", __cpm_get_iclk()/1000000);
|
|
+ len += sprintf (page+len, "SCLK : %d MHz\n", __cpm_get_sclk()/1000000);
|
|
+ len += sprintf (page+len, "MCLK : %d MHz\n", __cpm_get_mclk()/1000000);
|
|
+ len += sprintf (page+len, "PCLK : %d MHz\n", __cpm_get_pclk()/1000000);
|
|
+ len += sprintf (page+len, "DEVCLK : %d MHz\n", __cpm_get_devclk()/1000000);
|
|
+ len += sprintf (page+len, "RTCCLK : %d KHz\n", __cpm_get_rtcclk()/1000);
|
|
+ len += sprintf (page+len, "USBCLK : %d MHz\n", __cpm_get_usbclk()/1000000);
|
|
+#if defined(CONFIG_FB_JZ)
|
|
+ len += sprintf (page+len, "LCDCLK : %d MHz\n", __cpm_get_lcdclk()/1000000);
|
|
+ len += sprintf (page+len, "PIXCLK : %d MHz\n", __cpm_get_pixclk()/1000000);
|
|
+#endif
|
|
+ return len;
|
|
+}
|
|
+
|
|
+static int cgm_write_proc(struct file *file, const char *buffer, unsigned long count, void *data)
|
|
+{
|
|
+ REG_CPM_CFCR = simple_strtoul(buffer, 0, 16);
|
|
+ return count;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * WDT
|
|
+ */
|
|
+static int wdt_read_proc (char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+
|
|
+ len += sprintf (page+len, "WDT_WTCSR : 0x%08x\n", REG_WDT_WTCSR);
|
|
+ len += sprintf (page+len, "WDT_WTCNT : 0x%08x\n", REG_WDT_WTCNT);
|
|
+
|
|
+ return len;
|
|
+}
|
|
+
|
|
+static int wdt_write_proc(struct file *file, const char *buffer, unsigned long count, void *data)
|
|
+{
|
|
+ unsigned long cnt = simple_strtoul(buffer, 0, 16);
|
|
+
|
|
+ REG_WDT_WTCNT = cnt;
|
|
+ REG_WDT_WTCSR = WDT_WTCSR_START;
|
|
+
|
|
+ return count;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * PWM
|
|
+ */
|
|
+
|
|
+static int proc_jz_pwm_read_byte(char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ return sprintf (page, "0x%02x\n", REG8(data));
|
|
+}
|
|
+
|
|
+static int proc_jz_pwm_read_word(char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ return sprintf (page, "0x%04x\n", REG16(data));
|
|
+}
|
|
+
|
|
+static int proc_jz_pwm_write_byte(struct file *file, const char *buffer, unsigned long count, void *data)
|
|
+{
|
|
+ REG8(data) = simple_strtoul(buffer, 0, 16);
|
|
+ return count;
|
|
+}
|
|
+
|
|
+static int proc_jz_pwm_write_word(struct file *file, const char *buffer, unsigned long count, void *data)
|
|
+{
|
|
+ REG16(data) = simple_strtoul(buffer, 0, 16);
|
|
+ return count;
|
|
+}
|
|
+
|
|
+#define PWM_NUM 2
|
|
+
|
|
+static int jz_pwm_proc_init(void)
|
|
+{
|
|
+ struct proc_dir_entry *proc_jz_pwm, *res;
|
|
+ char name[16];
|
|
+ unsigned char i;
|
|
+
|
|
+ for (i = 0; i < PWM_NUM; i++) {
|
|
+ sprintf(name, "pwm%d", i);
|
|
+ proc_jz_pwm = proc_mkdir(name, proc_jz_root);
|
|
+ res = create_proc_entry("control", 0600, proc_jz_pwm);
|
|
+ if ( res) {
|
|
+ res->read_proc = proc_jz_pwm_read_byte;
|
|
+ res->write_proc = proc_jz_pwm_write_byte;
|
|
+ if (i)
|
|
+ res->data = (void * )PWM_CTR(1);
|
|
+ else
|
|
+ res->data = (void * )PWM_CTR(0);
|
|
+ }
|
|
+ res = create_proc_entry("period", 0600, proc_jz_pwm);
|
|
+ if ( res) {
|
|
+ res->read_proc = proc_jz_pwm_read_word;
|
|
+ res->write_proc = proc_jz_pwm_write_word;
|
|
+ if (i)
|
|
+ res->data = (void *)PWM_PER(1);
|
|
+ else
|
|
+ res->data = (void *)PWM_PER(0);
|
|
+ }
|
|
+ res = create_proc_entry("duty", 0600, proc_jz_pwm);
|
|
+ if ( res) {
|
|
+ res->read_proc = proc_jz_pwm_read_word;
|
|
+ res->write_proc = proc_jz_pwm_write_word;
|
|
+ if (i)
|
|
+ res->data = (void * )PWM_DUT(1);
|
|
+ else
|
|
+ res->data = (void * )PWM_DUT(0);
|
|
+ }
|
|
+ }
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * /proc/jz/xxx entry
|
|
+ *
|
|
+ */
|
|
+static int __init jz_proc_init(void)
|
|
+{
|
|
+ struct proc_dir_entry *entry;
|
|
+
|
|
+ /* create /proc/jz */
|
|
+ proc_jz_root = proc_mkdir("jz", 0);
|
|
+
|
|
+ /* create /proc/jz/emc */
|
|
+ entry = create_proc_entry("emc", 0644, proc_jz_root);
|
|
+ if (entry) {
|
|
+ entry->read_proc = emc_read_proc;
|
|
+ entry->write_proc = NULL;
|
|
+ entry->data = NULL;
|
|
+ }
|
|
+
|
|
+ /* create /proc/jz/pmc */
|
|
+ entry = create_proc_entry("pmc", 0644, proc_jz_root);
|
|
+ if (entry) {
|
|
+ entry->read_proc = pmc_read_proc;
|
|
+ entry->write_proc = pmc_write_proc;
|
|
+ entry->data = NULL;
|
|
+ }
|
|
+
|
|
+ /* create /proc/jz/cgm */
|
|
+ entry = create_proc_entry("cgm", 0644, proc_jz_root);
|
|
+ if (entry) {
|
|
+ entry->read_proc = cgm_read_proc;
|
|
+ entry->write_proc = cgm_write_proc;
|
|
+ entry->data = NULL;
|
|
+ }
|
|
+
|
|
+ /* create /proc/jz/wdt */
|
|
+ entry = create_proc_entry("wdt", 0644, proc_jz_root);
|
|
+ if (entry) {
|
|
+ entry->read_proc = wdt_read_proc;
|
|
+ entry->write_proc = wdt_write_proc;
|
|
+ entry->data = NULL;
|
|
+ }
|
|
+
|
|
+ /* PWM */
|
|
+ jz_pwm_proc_init();
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+__initcall(jz_proc_init);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4730/prom.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4730/prom.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,198 @@
|
|
+/*
|
|
+ *
|
|
+ * BRIEF MODULE DESCRIPTION
|
|
+ * PROM library initialisation code, supports YAMON and U-Boot.
|
|
+ *
|
|
+ * Copyright 2000, 2001, 2006 MontaVista Software Inc.
|
|
+ * Author: MontaVista Software, Inc.
|
|
+ * ppopov@mvista.com or source@mvista.com
|
|
+ *
|
|
+ * This file was derived from Carsten Langgaard's
|
|
+ * arch/mips/mips-boards/xx files.
|
|
+ *
|
|
+ * Carsten Langgaard, carstenl@mips.com
|
|
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License as published by the
|
|
+ * Free Software Foundation; either version 2 of the License, or (at your
|
|
+ * option) any later version.
|
|
+ *
|
|
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
|
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
|
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License along
|
|
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
|
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
+ */
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/string.h>
|
|
+
|
|
+#include <asm/bootinfo.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+/* #define DEBUG_CMDLINE */
|
|
+
|
|
+int prom_argc;
|
|
+char **prom_argv, **prom_envp;
|
|
+
|
|
+char * prom_getcmdline(void)
|
|
+{
|
|
+ return &(arcs_cmdline[0]);
|
|
+}
|
|
+
|
|
+void prom_init_cmdline(void)
|
|
+{
|
|
+ char *cp;
|
|
+ int actr;
|
|
+
|
|
+ actr = 1; /* Always ignore argv[0] */
|
|
+
|
|
+ cp = &(arcs_cmdline[0]);
|
|
+ while(actr < prom_argc) {
|
|
+ strcpy(cp, prom_argv[actr]);
|
|
+ cp += strlen(prom_argv[actr]);
|
|
+ *cp++ = ' ';
|
|
+ actr++;
|
|
+ }
|
|
+ if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
|
|
+ --cp;
|
|
+ if (prom_argc > 1)
|
|
+ *cp = '\0';
|
|
+
|
|
+}
|
|
+
|
|
+
|
|
+char *prom_getenv(char *envname)
|
|
+{
|
|
+#if 0
|
|
+ /*
|
|
+ * Return a pointer to the given environment variable.
|
|
+ * YAMON uses "name", "value" pairs, while U-Boot uses "name=value".
|
|
+ */
|
|
+
|
|
+ char **env = prom_envp;
|
|
+ int i = strlen(envname);
|
|
+ int yamon = (*env && strchr(*env, '=') == NULL);
|
|
+
|
|
+ while (*env) {
|
|
+ if (yamon) {
|
|
+ if (strcmp(envname, *env++) == 0)
|
|
+ return *env;
|
|
+ } else {
|
|
+ if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=')
|
|
+ return *env + i + 1;
|
|
+ }
|
|
+ env++;
|
|
+ }
|
|
+#endif
|
|
+ return NULL;
|
|
+}
|
|
+
|
|
+inline unsigned char str2hexnum(unsigned char c)
|
|
+{
|
|
+ if(c >= '0' && c <= '9')
|
|
+ return c - '0';
|
|
+ if(c >= 'a' && c <= 'f')
|
|
+ return c - 'a' + 10;
|
|
+ if(c >= 'A' && c <= 'F')
|
|
+ return c - 'A' + 10;
|
|
+ return 0; /* foo */
|
|
+}
|
|
+
|
|
+inline void str2eaddr(unsigned char *ea, unsigned char *str)
|
|
+{
|
|
+ int i;
|
|
+
|
|
+ for(i = 0; i < 6; i++) {
|
|
+ unsigned char num;
|
|
+
|
|
+ if((*str == '.') || (*str == ':'))
|
|
+ str++;
|
|
+ num = str2hexnum(*str++) << 4;
|
|
+ num |= (str2hexnum(*str++));
|
|
+ ea[i] = num;
|
|
+ }
|
|
+}
|
|
+
|
|
+int get_ethernet_addr(char *ethernet_addr)
|
|
+{
|
|
+ char *ethaddr_str;
|
|
+
|
|
+ ethaddr_str = prom_getenv("ethaddr");
|
|
+ if (!ethaddr_str) {
|
|
+ printk("ethaddr not set in boot prom\n");
|
|
+ return -1;
|
|
+ }
|
|
+ str2eaddr(ethernet_addr, ethaddr_str);
|
|
+
|
|
+#if 0
|
|
+ {
|
|
+ int i;
|
|
+
|
|
+ printk("get_ethernet_addr: ");
|
|
+ for (i=0; i<5; i++)
|
|
+ printk("%02x:", (unsigned char)*(ethernet_addr+i));
|
|
+ printk("%02x\n", *(ethernet_addr+i));
|
|
+ }
|
|
+#endif
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+void __init prom_free_prom_memory(void)
|
|
+{
|
|
+}
|
|
+
|
|
+void __init prom_init(void)
|
|
+{
|
|
+ unsigned char *memsize_str;
|
|
+ unsigned long memsize;
|
|
+
|
|
+ prom_argc = (int) fw_arg0;
|
|
+ prom_argv = (char **) fw_arg1;
|
|
+ prom_envp = (char **) fw_arg2;
|
|
+
|
|
+ mips_machtype = MACH_INGENIC_JZ4730;
|
|
+
|
|
+ prom_init_cmdline();
|
|
+ memsize_str = prom_getenv("memsize");
|
|
+ if (!memsize_str) {
|
|
+ memsize = 0x04000000;
|
|
+ } else {
|
|
+ memsize = simple_strtol(memsize_str, NULL, 0);
|
|
+ }
|
|
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
|
|
+}
|
|
+
|
|
+/* used by early printk */
|
|
+void prom_putchar(char c)
|
|
+{
|
|
+ volatile u8 *uart_lsr = (volatile u8 *)(UART3_BASE + OFF_LSR);
|
|
+ volatile u8 *uart_tdr = (volatile u8 *)(UART3_BASE + OFF_TDR);
|
|
+
|
|
+ /* Wait for fifo to shift out some bytes */
|
|
+ while ( !((*uart_lsr & (UARTLSR_TDRQ | UARTLSR_TEMT)) == 0x60) );
|
|
+
|
|
+ *uart_tdr = (u8)c;
|
|
+}
|
|
+
|
|
+const char *get_system_type(void)
|
|
+{
|
|
+ return "JZ4730";
|
|
+}
|
|
+
|
|
+EXPORT_SYMBOL(prom_getcmdline);
|
|
+EXPORT_SYMBOL(get_ethernet_addr);
|
|
+EXPORT_SYMBOL(str2eaddr);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4730/reset.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4730/reset.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,40 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4730/reset.c
|
|
+ *
|
|
+ * JZ4730 reset routines.
|
|
+ *
|
|
+ * Copyright (c) 2006-2007 Ingenic Semiconductor Inc.
|
|
+ * Author: <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/sched.h>
|
|
+#include <linux/mm.h>
|
|
+#include <asm/io.h>
|
|
+#include <asm/pgtable.h>
|
|
+#include <asm/processor.h>
|
|
+#include <asm/reboot.h>
|
|
+#include <asm/system.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+void jz_restart(char *command)
|
|
+{
|
|
+ __wdt_set_count(0xffffffff-32); /* reset after 1/1024 s */
|
|
+ __wdt_start();
|
|
+ while (1);
|
|
+}
|
|
+
|
|
+void jz_halt(void)
|
|
+{
|
|
+ __wdt_set_count(0xffffffff-32); /* reset after 1/1024 s */
|
|
+ __wdt_start();
|
|
+ while (1);
|
|
+}
|
|
+
|
|
+void jz_power_off(void)
|
|
+{
|
|
+ jz_halt();
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/jz4730/setup.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4730/setup.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,182 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4730/setup.c
|
|
+ *
|
|
+ * JZ4730 CPU common setup routines.
|
|
+ *
|
|
+ * Copyright (c) 2006-2007 Ingenic Semiconductor Inc.
|
|
+ * Author: <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+#include <linux/init.h>
|
|
+#include <linux/string.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/io.h>
|
|
+#include <linux/irq.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/tty.h>
|
|
+#include <linux/serial.h>
|
|
+#include <linux/serial_core.h>
|
|
+#include <linux/serial_8250.h>
|
|
+
|
|
+#include <asm/cpu.h>
|
|
+#include <asm/bootinfo.h>
|
|
+#include <asm/irq.h>
|
|
+#include <asm/mipsregs.h>
|
|
+#include <asm/reboot.h>
|
|
+#include <asm/pgtable.h>
|
|
+#include <asm/time.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+#ifdef CONFIG_PC_KEYB
|
|
+#include <asm/keyboard.h>
|
|
+#endif
|
|
+
|
|
+jz_clocks_t jz_clocks;
|
|
+
|
|
+extern char * __init prom_getcmdline(void);
|
|
+extern void __init jz_board_setup(void);
|
|
+extern void jz_restart(char *);
|
|
+extern void jz_halt(void);
|
|
+extern void jz_power_off(void);
|
|
+extern void jz_time_init(void);
|
|
+
|
|
+static void __init sysclocks_setup(void)
|
|
+{
|
|
+#ifndef CONFIG_JZ4730_URANUS
|
|
+ jz_clocks.iclk = __cpm_get_iclk();
|
|
+ jz_clocks.sclk = __cpm_get_sclk();
|
|
+ jz_clocks.mclk = __cpm_get_mclk();
|
|
+ jz_clocks.pclk = __cpm_get_pclk();
|
|
+ jz_clocks.devclk = __cpm_get_devclk();
|
|
+ jz_clocks.rtcclk = __cpm_get_rtcclk();
|
|
+ jz_clocks.uartclk = __cpm_get_uartclk();
|
|
+ jz_clocks.lcdclk = __cpm_get_lcdclk();
|
|
+ jz_clocks.pixclk = __cpm_get_pixclk();
|
|
+ jz_clocks.usbclk = __cpm_get_usbclk();
|
|
+ jz_clocks.i2sclk = __cpm_get_i2sclk();
|
|
+ jz_clocks.mscclk = __cpm_get_mscclk();
|
|
+#else /* URANUS FPGA */
|
|
+
|
|
+#define FPGACLK 8000000
|
|
+
|
|
+ jz_clocks.iclk = FPGACLK;
|
|
+ jz_clocks.sclk = FPGACLK;
|
|
+ jz_clocks.mclk = FPGACLK;
|
|
+ jz_clocks.devclk = FPGACLK;
|
|
+ jz_clocks.rtcclk = FPGACLK;
|
|
+ jz_clocks.uartclk = FPGACLK;
|
|
+ jz_clocks.pixclk = FPGACLK;
|
|
+ jz_clocks.lcdclk = FPGACLK;
|
|
+ jz_clocks.usbclk = FPGACLK;
|
|
+ jz_clocks.i2sclk = FPGACLK;
|
|
+ jz_clocks.mscclk = FPGACLK;
|
|
+#endif
|
|
+
|
|
+ printk("CPU clock: %dMHz, System clock: %dMHz, Memory clock: %dMHz, Peripheral clock: %dMHz\n",
|
|
+ (jz_clocks.iclk + 500000) / 1000000,
|
|
+ (jz_clocks.sclk + 500000) / 1000000,
|
|
+ (jz_clocks.mclk + 500000) / 1000000,
|
|
+ (jz_clocks.pclk + 500000) / 1000000);
|
|
+}
|
|
+
|
|
+static void __init soc_cpm_setup(void)
|
|
+{
|
|
+ __cpm_idle_mode();
|
|
+ __cpm_enable_cko1();
|
|
+ __cpm_start_all();
|
|
+
|
|
+ /* get system clocks */
|
|
+ sysclocks_setup();
|
|
+}
|
|
+
|
|
+static void __init soc_harb_setup(void)
|
|
+{
|
|
+// __harb_set_priority(0x00); /* CIM>LCD>DMA>ETH>PCI>USB>CBB */
|
|
+// __harb_set_priority(0x03); /* LCD>CIM>DMA>ETH>PCI>USB>CBB */
|
|
+ __harb_set_priority(0x08); /* DMAC>LCD>CIM>ETH>USB>CIM */
|
|
+// __harb_set_priority(0x0a); /* ETH>LCD>CIM>DMA>PCI>USB>CBB */
|
|
+}
|
|
+
|
|
+static void __init soc_emc_setup(void)
|
|
+{
|
|
+}
|
|
+
|
|
+static void __init soc_dmac_setup(void)
|
|
+{
|
|
+ __dmac_enable_all_channels();
|
|
+}
|
|
+
|
|
+static void __init jz_soc_setup(void)
|
|
+{
|
|
+ soc_cpm_setup();
|
|
+ soc_harb_setup();
|
|
+ soc_emc_setup();
|
|
+ soc_dmac_setup();
|
|
+}
|
|
+
|
|
+static void __init jz_serial_setup(void)
|
|
+{
|
|
+#ifdef CONFIG_SERIAL_8250
|
|
+ struct uart_port s;
|
|
+
|
|
+ memset(&s, 0, sizeof(s));
|
|
+
|
|
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
|
|
+ s.iotype = UPIO_MEM;
|
|
+ s.regshift = 2;
|
|
+ s.uartclk = jz_clocks.uartclk;
|
|
+
|
|
+ s.line = 0;
|
|
+ s.membase = (u8 *)UART0_BASE;
|
|
+ s.irq = IRQ_UART0;
|
|
+ if (early_serial_setup(&s) != 0) {
|
|
+ printk(KERN_ERR "Serial ttyS0 setup failed!\n");
|
|
+ }
|
|
+
|
|
+ s.line = 1;
|
|
+ s.membase = (u8 *)UART1_BASE;
|
|
+ s.irq = IRQ_UART1;
|
|
+ if (early_serial_setup(&s) != 0) {
|
|
+ printk(KERN_ERR "Serial ttyS1 setup failed!\n");
|
|
+ }
|
|
+
|
|
+ s.line = 2;
|
|
+ s.membase = (u8 *)UART2_BASE;
|
|
+ s.irq = IRQ_UART2;
|
|
+ if (early_serial_setup(&s) != 0) {
|
|
+ printk(KERN_ERR "Serial ttyS2 setup failed!\n");
|
|
+ }
|
|
+
|
|
+ s.line = 3;
|
|
+ s.membase = (u8 *)UART3_BASE;
|
|
+ s.irq = IRQ_UART3;
|
|
+ if (early_serial_setup(&s) != 0) {
|
|
+ printk(KERN_ERR "Serial ttyS3 setup failed!\n");
|
|
+ }
|
|
+#endif
|
|
+}
|
|
+
|
|
+void __init plat_mem_setup(void)
|
|
+{
|
|
+ char *argptr;
|
|
+
|
|
+ argptr = prom_getcmdline();
|
|
+
|
|
+ /* IO/MEM resources. */
|
|
+ set_io_port_base(0);
|
|
+ ioport_resource.start = 0x00000000;
|
|
+ ioport_resource.end = 0xffffffff;
|
|
+ iomem_resource.start = 0x00000000;
|
|
+ iomem_resource.end = 0xffffffff;
|
|
+
|
|
+ _machine_restart = jz_restart;
|
|
+ _machine_halt = jz_halt;
|
|
+ pm_power_off = jz_power_off;
|
|
+
|
|
+ jz_soc_setup(); /* soc specific setup */
|
|
+ jz_serial_setup(); /* serial port setup */
|
|
+ jz_board_setup(); /* board specific setup */
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/jz4730/sleep.S 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4730/sleep.S 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,307 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4730/sleep.S
|
|
+ *
|
|
+ * jz4730 Assembler Sleep/WakeUp Management Routines
|
|
+ *
|
|
+ * Copyright (C) 2005 Ingenic Semiconductor
|
|
+ * Author: <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ */
|
|
+
|
|
+#include <asm/regdef.h>
|
|
+#include <asm/mipsregs.h>
|
|
+#include <asm/mach-jz4730/regs.h>
|
|
+
|
|
+ .text
|
|
+ .set noreorder
|
|
+ .set noat
|
|
+
|
|
+ .extern jz_flush_cache_all
|
|
+
|
|
+/*
|
|
+ * jz_cpu_suspend()
|
|
+ *
|
|
+ * Forces CPU into hibernate mode
|
|
+ */
|
|
+
|
|
+ .globl jz_cpu_suspend
|
|
+jz_cpu_suspend:
|
|
+
|
|
+ /* save hi, lo and general registers except k0($26) and k1($27) (total 32) */
|
|
+ move k0, sp
|
|
+ addiu k0, k0, -(32*4)
|
|
+ mfhi k1
|
|
+ sw $0, 0(k0)
|
|
+ sw $1, 4(k0)
|
|
+ sw k1, 120(k0) /* hi */
|
|
+ mflo k1
|
|
+ sw $2, 8(k0)
|
|
+ sw $3, 12(k0)
|
|
+ sw k1, 124(k0) /* lo */
|
|
+ sw $4, 16(k0)
|
|
+ sw $5, 20(k0)
|
|
+ sw $6, 24(k0)
|
|
+ sw $7, 28(k0)
|
|
+ sw $8, 32(k0)
|
|
+ sw $9, 36(k0)
|
|
+ sw $10, 40(k0)
|
|
+ sw $11, 44(k0)
|
|
+ sw $12, 48(k0)
|
|
+ sw $13, 52(k0)
|
|
+ sw $14, 56(k0)
|
|
+ sw $15, 60(k0)
|
|
+ sw $16, 64(k0)
|
|
+ sw $17, 68(k0)
|
|
+ sw $18, 72(k0)
|
|
+ sw $19, 76(k0)
|
|
+ sw $20, 80(k0)
|
|
+ sw $21, 84(k0)
|
|
+ sw $22, 88(k0)
|
|
+ sw $23, 92(k0)
|
|
+ sw $24, 96(k0)
|
|
+ sw $25, 100(k0)
|
|
+ sw $28, 104(k0)
|
|
+ sw $29, 108(k0) /* saved sp */
|
|
+ sw $30, 112(k0)
|
|
+ sw $31, 116(k0) /* saved ra */
|
|
+ move sp, k0
|
|
+
|
|
+ /* save CP0 registers and sp (total 26) */
|
|
+ move k0, sp
|
|
+ addiu k0, k0, -(26*4)
|
|
+
|
|
+ mfc0 $1, CP0_INDEX
|
|
+ mfc0 $2, CP0_RANDOM
|
|
+ mfc0 $3, CP0_ENTRYLO0
|
|
+ mfc0 $4, CP0_ENTRYLO1
|
|
+ mfc0 $5, CP0_CONTEXT
|
|
+ mfc0 $6, CP0_PAGEMASK
|
|
+ mfc0 $7, CP0_WIRED
|
|
+ mfc0 $8, CP0_BADVADDR
|
|
+ mfc0 $9, CP0_ENTRYHI
|
|
+ mfc0 $10, CP0_STATUS
|
|
+/* mfc0 $11, $12, 1*/ /* IntCtl */
|
|
+ mfc0 $12, CP0_CAUSE
|
|
+ mfc0 $13, CP0_EPC
|
|
+/* mfc0 $14, $15, 1*/ /* EBase */
|
|
+ mfc0 $15, CP0_CONFIG
|
|
+/* mfc0 $16, CP0_CONFIG, 7*/ /* Config 7 */
|
|
+ mfc0 $17, CP0_LLADDR
|
|
+ mfc0 $18, CP0_WATCHLO
|
|
+ mfc0 $19, CP0_WATCHHI
|
|
+ mfc0 $20, CP0_DEBUG
|
|
+ mfc0 $21, CP0_DEPC
|
|
+ mfc0 $22, CP0_ECC
|
|
+ mfc0 $23, CP0_TAGLO
|
|
+ mfc0 $24, CP0_ERROREPC
|
|
+ mfc0 $25, CP0_DESAVE
|
|
+
|
|
+ sw $1, 0(k0)
|
|
+ sw $2, 4(k0)
|
|
+ sw $3, 8(k0)
|
|
+ sw $4, 12(k0)
|
|
+ sw $5, 16(k0)
|
|
+ sw $6, 20(k0)
|
|
+ sw $7, 24(k0)
|
|
+ sw $8, 28(k0)
|
|
+ sw $9, 32(k0)
|
|
+ sw $10, 36(k0)
|
|
+ sw $11, 40(k0)
|
|
+ sw $12, 44(k0)
|
|
+ sw $13, 48(k0)
|
|
+ sw $14, 52(k0)
|
|
+ sw $15, 56(k0)
|
|
+ sw $16, 60(k0)
|
|
+ sw $17, 64(k0)
|
|
+ sw $18, 68(k0)
|
|
+ sw $19, 72(k0)
|
|
+ sw $20, 76(k0)
|
|
+ sw $21, 80(k0)
|
|
+ sw $22, 84(k0)
|
|
+ sw $23, 88(k0)
|
|
+ sw $24, 92(k0)
|
|
+ sw $25, 96(k0)
|
|
+ sw $29, 100(k0) /* saved sp */
|
|
+ move sp, k0
|
|
+
|
|
+ /* preserve virtual address of stack */
|
|
+ la k0, suspend_save_sp
|
|
+ sw sp, 0(k0)
|
|
+
|
|
+ /* flush caches and write buffers */
|
|
+ jal jz_flush_cache_all
|
|
+ nop
|
|
+
|
|
+ /* set new sdram refresh constant */
|
|
+ li t0, 1
|
|
+ la t1, EMC_RTCOR
|
|
+ sh t0, 0(t1)
|
|
+
|
|
+ /* disable PLL */
|
|
+ la t0, CPM_PLCR1
|
|
+ sw $0, 0(t0)
|
|
+
|
|
+ /* put CPU to hibernate mode */
|
|
+ la t0, CPM_LPCR
|
|
+ lw t1, 0(t0)
|
|
+ li t2, ~CPM_LPCR_LPM_MASK
|
|
+ and t1, t2
|
|
+ ori t1, CPM_LPCR_LPM_HIBERNATE
|
|
+
|
|
+ .align 5
|
|
+ /* align execution to a cache line */
|
|
+ j 1f
|
|
+
|
|
+ .align 5
|
|
+1:
|
|
+ /* all needed values are now in registers.
|
|
+ * These last instructions should be in cache
|
|
+ */
|
|
+ nop
|
|
+ nop
|
|
+
|
|
+ /* set hibernate mode */
|
|
+ sw t1, 0(t0)
|
|
+ nop
|
|
+
|
|
+ /* enter hibernate mode */
|
|
+ .set mips3
|
|
+ wait
|
|
+ nop
|
|
+ .set mips2
|
|
+
|
|
+2: j 2b /* loop waiting for suspended */
|
|
+ nop
|
|
+
|
|
+/*
|
|
+ * jz_cpu_resume()
|
|
+ *
|
|
+ * entry point from bootloader into kernel during resume
|
|
+ */
|
|
+
|
|
+ .align 5
|
|
+ .globl jz_cpu_resume
|
|
+jz_cpu_resume:
|
|
+ /* clear SCR.HGP */
|
|
+ la t0, CPM_SCR
|
|
+ lw t1, 0(t0)
|
|
+ li t2, ~CPM_SCR_HGP
|
|
+ and t1, t2
|
|
+ sw t1, 0(t0)
|
|
+
|
|
+ /* restore LPCR.LPM to IDLE mode */
|
|
+ la t0, CPM_LPCR
|
|
+ lw t1, 0(t0)
|
|
+ li t2, ~CPM_LPCR_LPM_MASK
|
|
+ and t1, t2
|
|
+ ori t1, CPM_LPCR_LPM_IDLE
|
|
+ sw t1, 0(t0)
|
|
+
|
|
+ /* restore saved sp */
|
|
+ la t0, suspend_save_sp
|
|
+ lw sp, 0(t0)
|
|
+
|
|
+ /* restore CP0 registers */
|
|
+ move k0, sp
|
|
+ lw $1, 0(k0)
|
|
+ lw $2, 4(k0)
|
|
+ lw $3, 8(k0)
|
|
+ lw $4, 12(k0)
|
|
+ lw $5, 16(k0)
|
|
+ lw $6, 20(k0)
|
|
+ lw $7, 24(k0)
|
|
+ lw $8, 28(k0)
|
|
+ lw $9, 32(k0)
|
|
+ lw $10, 36(k0)
|
|
+ lw $11, 40(k0)
|
|
+ lw $12, 44(k0)
|
|
+ lw $13, 48(k0)
|
|
+ lw $14, 52(k0)
|
|
+ lw $15, 56(k0)
|
|
+ lw $16, 60(k0)
|
|
+ lw $17, 64(k0)
|
|
+ lw $18, 68(k0)
|
|
+ lw $19, 72(k0)
|
|
+ lw $20, 76(k0)
|
|
+ lw $21, 80(k0)
|
|
+ lw $22, 84(k0)
|
|
+ lw $23, 88(k0)
|
|
+ lw $24, 92(k0)
|
|
+ lw $25, 96(k0)
|
|
+ lw $29, 100(k0) /* saved sp */
|
|
+
|
|
+ mtc0 $1, CP0_INDEX
|
|
+ mtc0 $2, CP0_RANDOM
|
|
+ mtc0 $3, CP0_ENTRYLO0
|
|
+ mtc0 $4, CP0_ENTRYLO1
|
|
+ mtc0 $5, CP0_CONTEXT
|
|
+ mtc0 $6, CP0_PAGEMASK
|
|
+ mtc0 $7, CP0_WIRED
|
|
+ mtc0 $8, CP0_BADVADDR
|
|
+ mtc0 $9, CP0_ENTRYHI
|
|
+ mtc0 $10, CP0_STATUS
|
|
+/* mtc0 $11, $12, 1*/ /* IntCtl */
|
|
+ mtc0 $12, CP0_CAUSE
|
|
+ mtc0 $13, CP0_EPC
|
|
+/* mtc0 $14, $15, 1*/ /* EBase */
|
|
+ mtc0 $15, CP0_CONFIG
|
|
+/* mtc0 $16, CP0_CONFIG, 7*/ /* Config 7 */
|
|
+ mtc0 $17, CP0_LLADDR
|
|
+ mtc0 $18, CP0_WATCHLO
|
|
+ mtc0 $19, CP0_WATCHHI
|
|
+ mtc0 $20, CP0_DEBUG
|
|
+ mtc0 $21, CP0_DEPC
|
|
+ mtc0 $22, CP0_ECC
|
|
+ mtc0 $23, CP0_TAGLO
|
|
+ mtc0 $24, CP0_ERROREPC
|
|
+ mtc0 $25, CP0_DESAVE
|
|
+
|
|
+ /* restore general registers */
|
|
+ move k0, sp
|
|
+ lw k1, 120(k0) /* hi */
|
|
+ lw $0, 0(k0)
|
|
+ lw $1, 4(k0)
|
|
+ mthi k1
|
|
+ lw k1, 124(k0) /* lo */
|
|
+ lw $2, 8(k0)
|
|
+ lw $3, 12(k0)
|
|
+ mtlo k1
|
|
+ lw $4, 16(k0)
|
|
+ lw $5, 20(k0)
|
|
+ lw $6, 24(k0)
|
|
+ lw $7, 28(k0)
|
|
+ lw $8, 32(k0)
|
|
+ lw $9, 36(k0)
|
|
+ lw $10, 40(k0)
|
|
+ lw $11, 44(k0)
|
|
+ lw $12, 48(k0)
|
|
+ lw $13, 52(k0)
|
|
+ lw $14, 56(k0)
|
|
+ lw $15, 60(k0)
|
|
+ lw $16, 64(k0)
|
|
+ lw $17, 68(k0)
|
|
+ lw $18, 72(k0)
|
|
+ lw $19, 76(k0)
|
|
+ lw $20, 80(k0)
|
|
+ lw $21, 84(k0)
|
|
+ lw $22, 88(k0)
|
|
+ lw $23, 92(k0)
|
|
+ lw $24, 96(k0)
|
|
+ lw $25, 100(k0)
|
|
+ lw $28, 104(k0)
|
|
+ lw $29, 108(k0) /* saved sp */
|
|
+ lw $30, 112(k0)
|
|
+ lw $31, 116(k0) /* saved ra */
|
|
+
|
|
+ /* return to caller */
|
|
+ jr ra
|
|
+ nop
|
|
+
|
|
+suspend_save_sp:
|
|
+ .word 0 /* preserve sp here */
|
|
+
|
|
+ .set reorder
|
|
--- linux-2.6.24.7.old/arch/mips/jz4730/time.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4730/time.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,129 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4730/time.c
|
|
+ *
|
|
+ * Setting up the clock on the JZ4730 boards.
|
|
+ *
|
|
+ * Copyright (c) 2006-2008 Ingenic Semiconductor Inc.
|
|
+ * Author: <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+#include <linux/types.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/time.h>
|
|
+#include <linux/clockchips.h>
|
|
+
|
|
+#include <asm/time.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+#define JZ_TIMER_CHAN 0
|
|
+#define JZ_TIMER_IRQ IRQ_OST0
|
|
+#define JZ_TIMER_CLOCK JZ_EXTAL
|
|
+
|
|
+static unsigned int timer_latch;
|
|
+
|
|
+void (*jz_timer_callback)(void);
|
|
+
|
|
+static void jz_set_mode(enum clock_event_mode mode,
|
|
+ struct clock_event_device *evt)
|
|
+{
|
|
+ switch (mode) {
|
|
+ case CLOCK_EVT_MODE_PERIODIC:
|
|
+ break;
|
|
+ case CLOCK_EVT_MODE_ONESHOT:
|
|
+ case CLOCK_EVT_MODE_UNUSED:
|
|
+ case CLOCK_EVT_MODE_SHUTDOWN:
|
|
+ break;
|
|
+ case CLOCK_EVT_MODE_RESUME:
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+static struct clock_event_device jz_clockevent_device = {
|
|
+ .name = "jz-timer",
|
|
+ .features = CLOCK_EVT_FEAT_PERIODIC,
|
|
+
|
|
+ /* .mult, .shift, .max_delta_ns and .min_delta_ns left uninitialized */
|
|
+
|
|
+ .rating = 300,
|
|
+ .irq = JZ_TIMER_IRQ,
|
|
+ .set_mode = jz_set_mode,
|
|
+};
|
|
+
|
|
+static irqreturn_t jz_timer_interrupt(int irq, void *dev_id)
|
|
+{
|
|
+ struct clock_event_device *cd = dev_id;
|
|
+
|
|
+ __ost_clear_uf(JZ_TIMER_CHAN); /* ACK timer */
|
|
+
|
|
+ if (jz_timer_callback)
|
|
+ jz_timer_callback();
|
|
+
|
|
+ cd->event_handler(cd);
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+static struct irqaction jz_irqaction = {
|
|
+ .handler = jz_timer_interrupt,
|
|
+ .flags = IRQF_DISABLED | IRQF_PERCPU,
|
|
+ .name = "jz-timer",
|
|
+};
|
|
+
|
|
+cycle_t jz_get_cycles(void)
|
|
+{
|
|
+ unsigned int jz_timer_cnt;
|
|
+#if 0 /* clock source use pll, read directly */
|
|
+ jz_timer_cnt = timer_latch - REG_OST_TCNT(JZ_TIMER_CHAN);
|
|
+#else /* clock source use RTCClock or Extall Clock, wait read ready */
|
|
+ jz_timer_cnt = REG_OST_TCNT(JZ_TIMER_CHAN); /* dummy read */
|
|
+ while ( __ost_is_busy(JZ_TIMER_CHAN) ) ; /* wait read ready */
|
|
+ jz_timer_cnt = timer_latch - REG_OST_TCRB(JZ_TIMER_CHAN);
|
|
+#endif
|
|
+
|
|
+ /* convert jiffes to jz timer cycles */
|
|
+ return (cycle_t)( jiffies*((JZ_TIMER_CLOCK)/HZ) + jz_timer_cnt);
|
|
+}
|
|
+
|
|
+static struct clocksource clocksource_jz = {
|
|
+ .name = "jz_clocksource",
|
|
+ .rating = 300,
|
|
+ .read = jz_get_cycles,
|
|
+ .mask = 0xFFFFFFFF,
|
|
+ .shift = 10, /* control clocksource.mult's accuracy */
|
|
+ .flags = CLOCK_SOURCE_WATCHDOG,
|
|
+};
|
|
+
|
|
+static int __init jz_clocksource_init(void)
|
|
+{
|
|
+ clocksource_jz.mult = clocksource_hz2mult(JZ_TIMER_CLOCK, clocksource_jz.shift);
|
|
+ clocksource_register(&clocksource_jz);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void __init jz_timer_setup(void)
|
|
+{
|
|
+ struct clock_event_device *cd = &jz_clockevent_device;
|
|
+ struct irqaction *action = &jz_irqaction;
|
|
+ unsigned int cpu = smp_processor_id();
|
|
+
|
|
+ jz_clocksource_init();
|
|
+ cd->cpumask = cpumask_of_cpu(cpu);
|
|
+ clockevents_register_device(cd);
|
|
+ action->dev_id = cd;
|
|
+ setup_irq(JZ_TIMER_IRQ, &jz_irqaction);
|
|
+}
|
|
+
|
|
+void __init plat_time_init(void)
|
|
+{
|
|
+ /* Init timer, timer clock soure use extal clock */
|
|
+ timer_latch = (JZ_TIMER_CLOCK + (HZ>>1)) / HZ;
|
|
+ __ost_set_mode(JZ_TIMER_CHAN, OST_TCSR_UIE | OST_TCSR_CKS_EXTAL);
|
|
+ __ost_set_reload(JZ_TIMER_CHAN, timer_latch);
|
|
+ __ost_set_count(JZ_TIMER_CHAN, timer_latch);
|
|
+ __ost_enable_channel(JZ_TIMER_CHAN);
|
|
+
|
|
+ jz_timer_setup();
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/jz4740/Makefile 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4740/Makefile 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,26 @@
|
|
+#
|
|
+# Makefile for the Ingenic JZ4740.
|
|
+#
|
|
+
|
|
+# Object file lists.
|
|
+
|
|
+obj-y += prom.o irq.o time.o reset.o setup.o dma.o \
|
|
+ platform.o i2c.o
|
|
+
|
|
+obj-$(CONFIG_PROC_FS) += proc.o
|
|
+
|
|
+# board specific support
|
|
+
|
|
+obj-$(CONFIG_JZ4740_PAVO) += board-pavo.o
|
|
+obj-$(CONFIG_JZ4740_LEO) += board-leo.o
|
|
+obj-$(CONFIG_JZ4740_LYRA) += board-lyra.o
|
|
+obj-$(CONFIG_JZ4725_DIPPER) += board-dipper.o
|
|
+obj-$(CONFIG_JZ4720_VIRGO) += board-virgo.o
|
|
+
|
|
+# PM support
|
|
+
|
|
+obj-$(CONFIG_PM_LEGACY) +=pm.o
|
|
+
|
|
+# CPU Frequency scaling support
|
|
+
|
|
+obj-$(CONFIG_CPU_FREQ_JZ) +=cpufreq.o
|
|
--- linux-2.6.24.7.old/arch/mips/jz4740/board-dipper.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4740/board-dipper.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,117 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4740/board-dipper.c
|
|
+ *
|
|
+ * JZ4725 Dipper board setup routines.
|
|
+ *
|
|
+ * Copyright (c) 2006-2007 Ingenic Semiconductor Inc.
|
|
+ * Author: <lhhuang@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/mm.h>
|
|
+#include <linux/console.h>
|
|
+#include <linux/delay.h>
|
|
+
|
|
+#include <asm/cpu.h>
|
|
+#include <asm/bootinfo.h>
|
|
+#include <asm/mipsregs.h>
|
|
+#include <asm/reboot.h>
|
|
+
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+extern void (*jz_timer_callback)(void);
|
|
+
|
|
+#if 0
|
|
+static void dancing(void)
|
|
+{
|
|
+ static unsigned int count = 0;
|
|
+
|
|
+ count ++;
|
|
+ count &= 1;
|
|
+
|
|
+ if (count)
|
|
+ __gpio_set_pin(GPIO_LED_EN);
|
|
+ else
|
|
+ __gpio_clear_pin(GPIO_LED_EN);
|
|
+}
|
|
+#endif
|
|
+
|
|
+static void dipper_timer_callback(void)
|
|
+{
|
|
+ static unsigned long count = 0;
|
|
+
|
|
+ if ((++count) % 50 == 0) {
|
|
+// dancing();
|
|
+ count = 0;
|
|
+ }
|
|
+}
|
|
+
|
|
+static void __init board_cpm_setup(void)
|
|
+{
|
|
+ /* Stop unused module clocks here.
|
|
+ * We have started all module clocks at arch/mips/jz4740/setup.c.
|
|
+ */
|
|
+}
|
|
+
|
|
+static void __init board_gpio_setup(void)
|
|
+{
|
|
+ /*
|
|
+ * Most of the GPIO pins should have been initialized by the boot-loader
|
|
+ */
|
|
+
|
|
+ /*
|
|
+ * Initialize MSC pins
|
|
+ */
|
|
+ __gpio_as_msc();
|
|
+
|
|
+ /*
|
|
+ * Initialize Smart LCD pins
|
|
+ */
|
|
+// __gpio_as_slcd_18bit();
|
|
+
|
|
+ /*
|
|
+ * Initialize SSI pins
|
|
+ */
|
|
+ __gpio_as_ssi();
|
|
+
|
|
+ /*
|
|
+ * Initialize I2C pins
|
|
+ */
|
|
+ __gpio_as_i2c();
|
|
+
|
|
+ /*
|
|
+ * Initialize Other pins
|
|
+ */
|
|
+ __gpio_as_output(GPIO_SD_VCC_EN_N);
|
|
+ __gpio_clear_pin(GPIO_SD_VCC_EN_N);
|
|
+
|
|
+ __gpio_as_input(GPIO_SD_CD_N);
|
|
+ __gpio_disable_pull(GPIO_SD_CD_N);
|
|
+
|
|
+ __gpio_as_input(GPIO_SD_WP);
|
|
+ __gpio_disable_pull(GPIO_SD_WP);
|
|
+
|
|
+ __gpio_as_input(GPIO_DC_DETE_N);
|
|
+ __gpio_as_input(GPIO_CHARG_STAT_N);
|
|
+ __gpio_as_input(GPIO_USB_DETE);
|
|
+
|
|
+ __gpio_as_output(GPIO_DISP_OFF_N);
|
|
+
|
|
+// __gpio_as_output(GPIO_LED_EN);
|
|
+}
|
|
+
|
|
+void __init jz_board_setup(void)
|
|
+{
|
|
+ printk("JZ4725 DIPPER board setup\n");
|
|
+
|
|
+ board_cpm_setup();
|
|
+ board_gpio_setup();
|
|
+
|
|
+ jz_timer_callback = dipper_timer_callback;
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/jz4740/board-leo.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4740/board-leo.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,67 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4740/board-leo.c
|
|
+ *
|
|
+ * JZ4740 LEO board setup routines.
|
|
+ *
|
|
+ * Copyright (c) 2006-2007 Ingenic Semiconductor Inc.
|
|
+ * Author: <lhhuang@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/mm.h>
|
|
+#include <linux/console.h>
|
|
+#include <linux/delay.h>
|
|
+
|
|
+#include <asm/cpu.h>
|
|
+#include <asm/bootinfo.h>
|
|
+#include <asm/mipsregs.h>
|
|
+#include <asm/reboot.h>
|
|
+
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+extern void (*jz_timer_callback)(void);
|
|
+
|
|
+static void dancing(void)
|
|
+{
|
|
+ static unsigned char slash[] = "\\|/-";
|
|
+ static volatile unsigned char *p = (unsigned char *)0xb6000016;
|
|
+ static unsigned int count = 0;
|
|
+ *p = slash[count++];
|
|
+ count &= 3;
|
|
+}
|
|
+
|
|
+static void leo_timer_callback(void)
|
|
+{
|
|
+ static unsigned long count = 0;
|
|
+
|
|
+ if ((++count) % 10 == 0) {
|
|
+ dancing();
|
|
+ count = 0;
|
|
+ }
|
|
+}
|
|
+
|
|
+static void __init board_cpm_setup(void)
|
|
+{
|
|
+ /* Stop unused module clocks here.
|
|
+ * We have started all module clocks at arch/mips/jz4740/setup.c.
|
|
+ */
|
|
+}
|
|
+
|
|
+static void __init board_gpio_setup(void)
|
|
+{
|
|
+ /* All GPIO pins should have been initialized by the boot-loader */
|
|
+}
|
|
+
|
|
+void __init jz_board_setup(void)
|
|
+{
|
|
+ board_cpm_setup();
|
|
+ board_gpio_setup();
|
|
+ printk(" BOARD SETUP");
|
|
+ jz_timer_callback = leo_timer_callback;
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/jz4740/board-lyra.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4740/board-lyra.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,114 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4740/board-lyra.c
|
|
+ *
|
|
+ * JZ4740 LYRA board setup routines.
|
|
+ *
|
|
+ * Copyright (c) 2006-2007 Ingenic Semiconductor Inc.
|
|
+ * Author: <lhhuang@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/mm.h>
|
|
+#include <linux/console.h>
|
|
+#include <linux/delay.h>
|
|
+
|
|
+#include <asm/cpu.h>
|
|
+#include <asm/bootinfo.h>
|
|
+#include <asm/mipsregs.h>
|
|
+#include <asm/reboot.h>
|
|
+
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+extern void (*jz_timer_callback)(void);
|
|
+
|
|
+static void dancing(void)
|
|
+{
|
|
+ static unsigned int count = 0;
|
|
+
|
|
+ count ++;
|
|
+ count &= 1;
|
|
+ if (count)
|
|
+ __gpio_set_pin(GPIO_LED_EN);
|
|
+ else
|
|
+ __gpio_clear_pin(GPIO_LED_EN);
|
|
+}
|
|
+
|
|
+static void lyra_timer_callback(void)
|
|
+{
|
|
+ static unsigned long count = 0;
|
|
+
|
|
+ if ((++count) % 50 == 0) {
|
|
+ dancing();
|
|
+ count = 0;
|
|
+ }
|
|
+}
|
|
+
|
|
+static void __init board_cpm_setup(void)
|
|
+{
|
|
+ /* Stop unused module clocks here.
|
|
+ * We have started all module clocks at arch/mips/jz4740/setup.c.
|
|
+ */
|
|
+}
|
|
+
|
|
+static void __init board_gpio_setup(void)
|
|
+{
|
|
+ /*
|
|
+ * Most of the GPIO pins should have been initialized by the boot-loader
|
|
+ */
|
|
+
|
|
+ /*
|
|
+ * Initialize MSC pins
|
|
+ */
|
|
+ __gpio_as_msc();
|
|
+
|
|
+ /*
|
|
+ * Initialize LCD pins
|
|
+ */
|
|
+ __gpio_as_lcd_18bit();
|
|
+
|
|
+ /*
|
|
+ * Initialize SSI pins
|
|
+ */
|
|
+ __gpio_as_ssi();
|
|
+
|
|
+ /*
|
|
+ * Initialize I2C pins
|
|
+ */
|
|
+ __gpio_as_i2c();
|
|
+
|
|
+ /*
|
|
+ * Initialize Other pins
|
|
+ */
|
|
+ __gpio_as_output(GPIO_SD_VCC_EN_N);
|
|
+ __gpio_clear_pin(GPIO_SD_VCC_EN_N);
|
|
+
|
|
+ __gpio_as_input(GPIO_SD_CD_N);
|
|
+ __gpio_disable_pull(GPIO_SD_CD_N);
|
|
+
|
|
+ __gpio_as_input(GPIO_SD_WP);
|
|
+ __gpio_disable_pull(GPIO_SD_WP);
|
|
+
|
|
+ __gpio_as_input(GPIO_DC_DETE_N);
|
|
+ __gpio_as_input(GPIO_CHARG_STAT_N);
|
|
+ __gpio_as_input(GPIO_USB_DETE);
|
|
+
|
|
+ __gpio_as_output(GPIO_DISP_OFF_N);
|
|
+
|
|
+ __gpio_as_output(GPIO_LED_EN);
|
|
+}
|
|
+
|
|
+void __init jz_board_setup(void)
|
|
+{
|
|
+ printk("JZ4740 LYRA board setup\n");
|
|
+
|
|
+ board_cpm_setup();
|
|
+ board_gpio_setup();
|
|
+
|
|
+ jz_timer_callback = lyra_timer_callback;
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/jz4740/board-pavo.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4740/board-pavo.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,114 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4740/board-pavo.c
|
|
+ *
|
|
+ * JZ4740 PAVO board setup routines.
|
|
+ *
|
|
+ * Copyright (c) 2006-2007 Ingenic Semiconductor Inc.
|
|
+ * Author: <lhhuang@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/mm.h>
|
|
+#include <linux/console.h>
|
|
+#include <linux/delay.h>
|
|
+
|
|
+#include <asm/cpu.h>
|
|
+#include <asm/bootinfo.h>
|
|
+#include <asm/mipsregs.h>
|
|
+#include <asm/reboot.h>
|
|
+
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+extern void (*jz_timer_callback)(void);
|
|
+
|
|
+static void dancing(void)
|
|
+{
|
|
+ static unsigned int count = 0;
|
|
+
|
|
+ count ++;
|
|
+ count &= 1;
|
|
+ if (count)
|
|
+ __gpio_set_pin(GPIO_LED_EN);
|
|
+ else
|
|
+ __gpio_clear_pin(GPIO_LED_EN);
|
|
+}
|
|
+
|
|
+static void pavo_timer_callback(void)
|
|
+{
|
|
+ static unsigned long count = 0;
|
|
+
|
|
+ if ((++count) % 50 == 0) {
|
|
+ dancing();
|
|
+ count = 0;
|
|
+ }
|
|
+}
|
|
+
|
|
+static void __init board_cpm_setup(void)
|
|
+{
|
|
+ /* Stop unused module clocks here.
|
|
+ * We have started all module clocks at arch/mips/jz4740/setup.c.
|
|
+ */
|
|
+}
|
|
+
|
|
+static void __init board_gpio_setup(void)
|
|
+{
|
|
+ /*
|
|
+ * Most of the GPIO pins should have been initialized by the boot-loader
|
|
+ */
|
|
+
|
|
+ /*
|
|
+ * Initialize MSC pins
|
|
+ */
|
|
+ __gpio_as_msc();
|
|
+
|
|
+ /*
|
|
+ * Initialize LCD pins
|
|
+ */
|
|
+ __gpio_as_lcd_18bit();
|
|
+
|
|
+ /*
|
|
+ * Initialize SSI pins
|
|
+ */
|
|
+ __gpio_as_ssi();
|
|
+
|
|
+ /*
|
|
+ * Initialize I2C pins
|
|
+ */
|
|
+ __gpio_as_i2c();
|
|
+
|
|
+ /*
|
|
+ * Initialize Other pins
|
|
+ */
|
|
+ __gpio_as_output(GPIO_SD_VCC_EN_N);
|
|
+ __gpio_clear_pin(GPIO_SD_VCC_EN_N);
|
|
+
|
|
+ __gpio_as_input(GPIO_SD_CD_N);
|
|
+ __gpio_disable_pull(GPIO_SD_CD_N);
|
|
+
|
|
+ __gpio_as_input(GPIO_SD_WP);
|
|
+ __gpio_disable_pull(GPIO_SD_WP);
|
|
+
|
|
+ __gpio_as_input(GPIO_DC_DETE_N);
|
|
+ __gpio_as_input(GPIO_CHARG_STAT_N);
|
|
+ __gpio_as_input(GPIO_USB_DETE);
|
|
+
|
|
+ __gpio_as_output(GPIO_DISP_OFF_N);
|
|
+
|
|
+ __gpio_as_output(GPIO_LED_EN);
|
|
+}
|
|
+
|
|
+void __init jz_board_setup(void)
|
|
+{
|
|
+ printk("JZ4740 PAVO board setup\n");
|
|
+
|
|
+ board_cpm_setup();
|
|
+ board_gpio_setup();
|
|
+
|
|
+ jz_timer_callback = pavo_timer_callback;
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/jz4740/board-virgo.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4740/board-virgo.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,114 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4740/board-virgo.c
|
|
+ *
|
|
+ * JZ4720 VIRGO board setup routines.
|
|
+ *
|
|
+ * Copyright (c) 2006-2007 Ingenic Semiconductor Inc.
|
|
+ * Author: <lhhuang@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/mm.h>
|
|
+#include <linux/console.h>
|
|
+#include <linux/delay.h>
|
|
+
|
|
+#include <asm/cpu.h>
|
|
+#include <asm/bootinfo.h>
|
|
+#include <asm/mipsregs.h>
|
|
+#include <asm/reboot.h>
|
|
+
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+extern void (*jz_timer_callback)(void);
|
|
+
|
|
+static void dancing(void)
|
|
+{
|
|
+ static unsigned int count = 0;
|
|
+
|
|
+ count ++;
|
|
+ count &= 1;
|
|
+ if (count)
|
|
+ __gpio_set_pin(GPIO_LED_EN);
|
|
+ else
|
|
+ __gpio_clear_pin(GPIO_LED_EN);
|
|
+}
|
|
+
|
|
+static void virgo_timer_callback(void)
|
|
+{
|
|
+ static unsigned long count = 0;
|
|
+
|
|
+ if ((++count) % 50 == 0) {
|
|
+ dancing();
|
|
+ count = 0;
|
|
+ }
|
|
+}
|
|
+
|
|
+static void __init board_cpm_setup(void)
|
|
+{
|
|
+ /* Stop unused module clocks here.
|
|
+ * We have started all module clocks at arch/mips/jz4740/setup.c.
|
|
+ */
|
|
+}
|
|
+
|
|
+static void __init board_gpio_setup(void)
|
|
+{
|
|
+ /*
|
|
+ * Most of the GPIO pins should have been initialized by the boot-loader
|
|
+ */
|
|
+
|
|
+ /*
|
|
+ * Initialize MSC pins
|
|
+ */
|
|
+ __gpio_as_msc();
|
|
+
|
|
+ /*
|
|
+ * Initialize LCD pins
|
|
+ */
|
|
+// __gpio_as_lcd_18bit();
|
|
+
|
|
+ /*
|
|
+ * Initialize SSI pins
|
|
+ */
|
|
+ __gpio_as_ssi();
|
|
+
|
|
+ /*
|
|
+ * Initialize I2C pins
|
|
+ */
|
|
+ __gpio_as_i2c();
|
|
+
|
|
+ /*
|
|
+ * Initialize Other pins
|
|
+ */
|
|
+ __gpio_as_output(GPIO_SD_VCC_EN_N);
|
|
+ __gpio_clear_pin(GPIO_SD_VCC_EN_N);
|
|
+
|
|
+ __gpio_as_input(GPIO_SD_CD_N);
|
|
+ __gpio_disable_pull(GPIO_SD_CD_N);
|
|
+
|
|
+// __gpio_as_input(GPIO_SD_WP);
|
|
+// __gpio_disable_pull(GPIO_SD_WP);
|
|
+
|
|
+ __gpio_as_input(GPIO_DC_DETE_N);
|
|
+// __gpio_as_input(GPIO_CHARG_STAT_N);
|
|
+ __gpio_as_input(GPIO_USB_DETE);
|
|
+
|
|
+ __gpio_as_output(GPIO_DISP_OFF_N);
|
|
+
|
|
+// __gpio_as_output(GPIO_LED_EN);
|
|
+}
|
|
+
|
|
+void __init jz_board_setup(void)
|
|
+{
|
|
+ printk("JZ4720 VIRGO board setup\n");
|
|
+
|
|
+ board_cpm_setup();
|
|
+ board_gpio_setup();
|
|
+
|
|
+ jz_timer_callback = virgo_timer_callback;
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/jz4740/cpufreq.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4740/cpufreq.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,602 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4740/cpufreq.c
|
|
+ *
|
|
+ * cpufreq driver for JZ4740
|
|
+ *
|
|
+ * Copyright (c) 2006-2007 Ingenic Semiconductor Inc.
|
|
+ * Author: <lhhuang@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/init.h>
|
|
+
|
|
+#include <linux/cpufreq.h>
|
|
+
|
|
+#include <asm/jzsoc.h>
|
|
+#include <asm/processor.h>
|
|
+
|
|
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
|
|
+ "cpufreq-jz4740", msg)
|
|
+
|
|
+#undef CHANGE_PLL
|
|
+
|
|
+#define PLL_UNCHANGED 0
|
|
+#define PLL_GOES_UP 1
|
|
+#define PLL_GOES_DOWN 2
|
|
+
|
|
+#define PLL_WAIT_500NS (500*(__cpm_get_cclk()/1000000000))
|
|
+
|
|
+/* Saved the boot-time parameters */
|
|
+static struct {
|
|
+ /* SDRAM parameters */
|
|
+ unsigned int mclk; /* memory clock, KHz */
|
|
+ unsigned int tras; /* RAS pulse width, cycles of mclk */
|
|
+ unsigned int rcd; /* RAS to CAS Delay, cycles of mclk */
|
|
+ unsigned int tpc; /* RAS Precharge time, cycles of mclk */
|
|
+ unsigned int trwl; /* Write Precharge Time, cycles of mclk */
|
|
+ unsigned int trc; /* RAS Cycle Time, cycles of mclk */
|
|
+ unsigned int rtcor; /* Refresh Time Constant */
|
|
+ unsigned int sdram_initialized;
|
|
+
|
|
+ /* LCD parameters */
|
|
+ unsigned int lcd_clk; /* LCD clock, Hz */
|
|
+ unsigned int lcdpix_clk; /* LCD Pixel clock, Hz */
|
|
+ unsigned int lcd_clks_initialized;
|
|
+} boot_config;
|
|
+
|
|
+struct jz4740_freq_percpu_info {
|
|
+ struct cpufreq_frequency_table table[7];
|
|
+};
|
|
+
|
|
+static struct jz4740_freq_percpu_info jz4740_freq_table;
|
|
+
|
|
+/*
|
|
+ * This contains the registers value for an operating point.
|
|
+ * If only part of a register needs to change then there is
|
|
+ * a mask value for that register.
|
|
+ * When going to a new operating point the current register
|
|
+ * value is ANDed with the ~mask and ORed with the new value.
|
|
+ */
|
|
+struct dpm_regs {
|
|
+ u32 cpccr; /* Clock Freq Control Register */
|
|
+ u32 cpccr_mask; /* Clock Freq Control Register mask */
|
|
+ u32 cppcr; /* PLL1 Control Register */
|
|
+ u32 cppcr_mask; /* PLL1 Control Register mask */
|
|
+ u32 pll_up_flag; /* New PLL freq is higher than current or not */
|
|
+};
|
|
+
|
|
+extern jz_clocks_t jz_clocks;
|
|
+
|
|
+static void jz_update_clocks(void)
|
|
+{
|
|
+ /* Next clocks must be updated if we have changed
|
|
+ * the PLL or divisors.
|
|
+ */
|
|
+ jz_clocks.cclk = __cpm_get_cclk();
|
|
+ jz_clocks.hclk = __cpm_get_hclk();
|
|
+ jz_clocks.mclk = __cpm_get_mclk();
|
|
+ jz_clocks.pclk = __cpm_get_pclk();
|
|
+ jz_clocks.lcdclk = __cpm_get_lcdclk();
|
|
+ jz_clocks.pixclk = __cpm_get_pixclk();
|
|
+ jz_clocks.i2sclk = __cpm_get_i2sclk();
|
|
+ jz_clocks.usbclk = __cpm_get_usbclk();
|
|
+ jz_clocks.mscclk = __cpm_get_mscclk();
|
|
+}
|
|
+
|
|
+static void
|
|
+jz_init_boot_config(void)
|
|
+{
|
|
+ if (!boot_config.lcd_clks_initialized) {
|
|
+ /* the first time to scale pll */
|
|
+ boot_config.lcd_clk = __cpm_get_lcdclk();
|
|
+ boot_config.lcdpix_clk = __cpm_get_pixclk();
|
|
+ boot_config.lcd_clks_initialized = 1;
|
|
+ }
|
|
+
|
|
+ if (!boot_config.sdram_initialized) {
|
|
+ /* the first time to scale frequencies */
|
|
+ unsigned int dmcr, rtcor;
|
|
+ unsigned int tras, rcd, tpc, trwl, trc;
|
|
+
|
|
+ dmcr = REG_EMC_DMCR;
|
|
+ rtcor = REG_EMC_RTCOR;
|
|
+
|
|
+ tras = (dmcr >> 13) & 0x7;
|
|
+ rcd = (dmcr >> 11) & 0x3;
|
|
+ tpc = (dmcr >> 8) & 0x7;
|
|
+ trwl = (dmcr >> 5) & 0x3;
|
|
+ trc = (dmcr >> 2) & 0x7;
|
|
+
|
|
+ boot_config.mclk = __cpm_get_mclk() / 1000;
|
|
+ boot_config.tras = tras + 4;
|
|
+ boot_config.rcd = rcd + 1;
|
|
+ boot_config.tpc = tpc + 1;
|
|
+ boot_config.trwl = trwl + 1;
|
|
+ boot_config.trc = trc * 2 + 1;
|
|
+ boot_config.rtcor = rtcor;
|
|
+
|
|
+ boot_config.sdram_initialized = 1;
|
|
+ }
|
|
+}
|
|
+
|
|
+static void jz_update_dram_rtcor(unsigned int new_mclk)
|
|
+{
|
|
+ unsigned int rtcor;
|
|
+
|
|
+ new_mclk /= 1000;
|
|
+ rtcor = boot_config.rtcor * new_mclk / boot_config.mclk;
|
|
+ rtcor--;
|
|
+
|
|
+ if (rtcor < 1) rtcor = 1;
|
|
+ if (rtcor > 255) rtcor = 255;
|
|
+
|
|
+ REG_EMC_RTCOR = rtcor;
|
|
+ REG_EMC_RTCNT = rtcor;
|
|
+}
|
|
+
|
|
+static void jz_update_dram_dmcr(unsigned int new_mclk)
|
|
+{
|
|
+ unsigned int dmcr;
|
|
+ unsigned int tras, rcd, tpc, trwl, trc;
|
|
+ unsigned int valid_time, new_time; /* ns */
|
|
+
|
|
+ new_mclk /= 1000;
|
|
+ tras = boot_config.tras * new_mclk / boot_config.mclk;
|
|
+ rcd = boot_config.rcd * new_mclk / boot_config.mclk;
|
|
+ tpc = boot_config.tpc * new_mclk / boot_config.mclk;
|
|
+ trwl = boot_config.trwl * new_mclk / boot_config.mclk;
|
|
+ trc = boot_config.trc * new_mclk / boot_config.mclk;
|
|
+
|
|
+ /* Validation checking */
|
|
+ valid_time = (boot_config.tras * 1000000) / boot_config.mclk;
|
|
+ new_time = (tras * 1000000) / new_mclk;
|
|
+ if (new_time < valid_time) tras += 1;
|
|
+
|
|
+ valid_time = (boot_config.rcd * 1000000) / boot_config.mclk;
|
|
+ new_time = (rcd * 1000000) / new_mclk;
|
|
+ if (new_time < valid_time) rcd += 1;
|
|
+
|
|
+ valid_time = (boot_config.tpc * 1000000) / boot_config.mclk;
|
|
+ new_time = (tpc * 1000000) / new_mclk;
|
|
+ if (new_time < valid_time) tpc += 1;
|
|
+
|
|
+ valid_time = (boot_config.trwl * 1000000) / boot_config.mclk;
|
|
+ new_time = (trwl * 1000000) / new_mclk;
|
|
+ if (new_time < valid_time) trwl += 1;
|
|
+
|
|
+ valid_time = (boot_config.trc * 1000000) / boot_config.mclk;
|
|
+ new_time = (trc * 1000000) / new_mclk;
|
|
+ if (new_time < valid_time) trc += 2;
|
|
+
|
|
+ tras = (tras < 4) ? 4: tras;
|
|
+ tras = (tras > 11) ? 11: tras;
|
|
+ tras -= 4;
|
|
+
|
|
+ rcd = (rcd < 1) ? 1: rcd;
|
|
+ rcd = (rcd > 4) ? 4: rcd;
|
|
+ rcd -= 1;
|
|
+
|
|
+ tpc = (tpc < 1) ? 1: tpc;
|
|
+ tpc = (tpc > 8) ? 8: tpc;
|
|
+ tpc -= 1;
|
|
+
|
|
+ trwl = (trwl < 1) ? 1: trwl;
|
|
+ trwl = (trwl > 4) ? 4: trwl;
|
|
+ trwl -= 1;
|
|
+
|
|
+ trc = (trc < 1) ? 1: trc;
|
|
+ trc = (trc > 15) ? 15: trc;
|
|
+ trc /= 2;
|
|
+
|
|
+ dmcr = REG_EMC_DMCR;
|
|
+
|
|
+ dmcr &= ~(EMC_DMCR_TRAS_MASK | EMC_DMCR_RCD_MASK | EMC_DMCR_TPC_MASK | EMC_DMCR_TRWL_MASK | EMC_DMCR_TRC_MASK);
|
|
+ dmcr |= ((tras << EMC_DMCR_TRAS_BIT) | (rcd << EMC_DMCR_RCD_BIT) | (tpc << EMC_DMCR_TPC_BIT) | (trwl << EMC_DMCR_TRWL_BIT) | (trc << EMC_DMCR_TRC_BIT));
|
|
+
|
|
+ REG_EMC_DMCR = dmcr;
|
|
+}
|
|
+
|
|
+static void jz_update_dram_prev(unsigned int cur_mclk, unsigned int new_mclk)
|
|
+{
|
|
+ /* No risk, no fun: run with interrupts on! */
|
|
+ if (new_mclk > cur_mclk) {
|
|
+ /* We're going FASTER, so first update TRAS, RCD, TPC, TRWL
|
|
+ * and TRC of DMCR before changing the frequency.
|
|
+ */
|
|
+ jz_update_dram_dmcr(new_mclk);
|
|
+ } else {
|
|
+ /* We're going SLOWER: first update RTCOR value
|
|
+ * before changing the frequency.
|
|
+ */
|
|
+ jz_update_dram_rtcor(new_mclk);
|
|
+ }
|
|
+}
|
|
+
|
|
+static void jz_update_dram_post(unsigned int cur_mclk, unsigned int new_mclk)
|
|
+{
|
|
+ /* No risk, no fun: run with interrupts on! */
|
|
+ if (new_mclk > cur_mclk) {
|
|
+ /* We're going FASTER, so update RTCOR
|
|
+ * after changing the frequency
|
|
+ */
|
|
+ jz_update_dram_rtcor(new_mclk);
|
|
+ } else {
|
|
+ /* We're going SLOWER: so update TRAS, RCD, TPC, TRWL
|
|
+ * and TRC of DMCR after changing the frequency.
|
|
+ */
|
|
+ jz_update_dram_dmcr(new_mclk);
|
|
+ }
|
|
+}
|
|
+
|
|
+static void jz_scale_divisors(struct dpm_regs *regs)
|
|
+{
|
|
+ unsigned int cpccr;
|
|
+ unsigned int cur_mclk, new_mclk;
|
|
+ int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
|
|
+ unsigned int tmp = 0, wait = PLL_WAIT_500NS;
|
|
+
|
|
+ cpccr = REG_CPM_CPCCR;
|
|
+ cpccr &= ~((unsigned long)regs->cpccr_mask);
|
|
+ cpccr |= regs->cpccr;
|
|
+ cpccr |= CPM_CPCCR_CE; /* update immediately */
|
|
+
|
|
+ cur_mclk = __cpm_get_mclk();
|
|
+ new_mclk = __cpm_get_pllout() / div[(cpccr & CPM_CPCCR_MDIV_MASK) >> CPM_CPCCR_MDIV_BIT];
|
|
+
|
|
+ /* Update some DRAM parameters before changing frequency */
|
|
+ jz_update_dram_prev(cur_mclk, new_mclk);
|
|
+
|
|
+ /* update register to change the clocks.
|
|
+ * align this code to a cache line.
|
|
+ */
|
|
+ __asm__ __volatile__(
|
|
+ ".set noreorder\n\t"
|
|
+ ".align 5\n"
|
|
+ "sw %1,0(%0)\n\t"
|
|
+ "li %3,0\n\t"
|
|
+ "1:\n\t"
|
|
+ "bne %3,%2,1b\n\t"
|
|
+ "addi %3, 1\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ ".set reorder\n\t"
|
|
+ :
|
|
+ : "r" (CPM_CPCCR), "r" (cpccr), "r" (wait), "r" (tmp));
|
|
+
|
|
+ /* Update some other DRAM parameters after changing frequency */
|
|
+ jz_update_dram_post(cur_mclk, new_mclk);
|
|
+}
|
|
+
|
|
+#ifdef CHANGE_PLL
|
|
+/* Maintain the LCD clock and pixel clock */
|
|
+static void jz_scale_lcd_divisors(struct dpm_regs *regs)
|
|
+{
|
|
+ unsigned int new_pll, new_lcd_div, new_lcdpix_div;
|
|
+ unsigned int cpccr;
|
|
+ unsigned int tmp = 0, wait = PLL_WAIT_500NS;
|
|
+
|
|
+ if (!boot_config.lcd_clks_initialized) return;
|
|
+
|
|
+ new_pll = __cpm_get_pllout();
|
|
+ new_lcd_div = new_pll / boot_config.lcd_clk;
|
|
+ new_lcdpix_div = new_pll / boot_config.lcdpix_clk;
|
|
+
|
|
+ if (new_lcd_div < 1)
|
|
+ new_lcd_div = 1;
|
|
+ if (new_lcd_div > 16)
|
|
+ new_lcd_div = 16;
|
|
+
|
|
+ if (new_lcdpix_div < 1)
|
|
+ new_lcdpix_div = 1;
|
|
+ if (new_lcdpix_div > 512)
|
|
+ new_lcdpix_div = 512;
|
|
+
|
|
+// REG_CPM_CPCCR2 = new_lcdpix_div - 1;
|
|
+
|
|
+ cpccr = REG_CPM_CPCCR;
|
|
+ cpccr &= ~CPM_CPCCR_LDIV_MASK;
|
|
+ cpccr |= ((new_lcd_div - 1) << CPM_CPCCR_LDIV_BIT);
|
|
+ cpccr |= CPM_CPCCR_CE; /* update immediately */
|
|
+
|
|
+ /* update register to change the clocks.
|
|
+ * align this code to a cache line.
|
|
+ */
|
|
+ __asm__ __volatile__(
|
|
+ ".set noreorder\n\t"
|
|
+ ".align 5\n"
|
|
+ "sw %1,0(%0)\n\t"
|
|
+ "li %3,0\n\t"
|
|
+ "1:\n\t"
|
|
+ "bne %3,%2,1b\n\t"
|
|
+ "addi %3, 1\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ ".set reorder\n\t"
|
|
+ :
|
|
+ : "r" (CPM_CPCCR), "r" (cpccr), "r" (wait), "r" (tmp));
|
|
+}
|
|
+
|
|
+static void jz_scale_pll(struct dpm_regs *regs)
|
|
+{
|
|
+ unsigned int cppcr;
|
|
+ unsigned int cur_mclk, new_mclk, new_pll;
|
|
+ int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
|
|
+ int od[] = {1, 2, 2, 4};
|
|
+
|
|
+ cppcr = REG_CPM_CPPCR;
|
|
+ cppcr &= ~(regs->cppcr_mask | CPM_CPPCR_PLLS | CPM_CPPCR_PLLEN | CPM_CPPCR_PLLST_MASK);
|
|
+ regs->cppcr &= ~CPM_CPPCR_PLLEN;
|
|
+ cppcr |= (regs->cppcr | 0xff);
|
|
+
|
|
+ /* Update some DRAM parameters before changing frequency */
|
|
+ new_pll = JZ_EXTAL * ((cppcr>>23)+2) / ((((cppcr>>18)&0x1f)+2) * od[(cppcr>>16)&0x03]);
|
|
+ cur_mclk = __cpm_get_mclk();
|
|
+ new_mclk = new_pll / div[(REG_CPM_CPCCR>>CPM_CPCCR_MDIV_BIT) & 0xf];
|
|
+
|
|
+ /*
|
|
+ * Update some SDRAM parameters
|
|
+ */
|
|
+ jz_update_dram_prev(cur_mclk, new_mclk);
|
|
+
|
|
+ /*
|
|
+ * Update PLL, align code to cache line.
|
|
+ */
|
|
+ cppcr |= CPM_CPPCR_PLLEN;
|
|
+ __asm__ __volatile__(
|
|
+ ".set noreorder\n\t"
|
|
+ ".align 5\n"
|
|
+ "sw %1,0(%0)\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ ".set reorder\n\t"
|
|
+ :
|
|
+ : "r" (CPM_CPPCR), "r" (cppcr));
|
|
+
|
|
+ /* Update some other DRAM parameters after changing frequency */
|
|
+ jz_update_dram_post(cur_mclk, new_mclk);
|
|
+}
|
|
+#endif
|
|
+
|
|
+static void jz4740_transition(struct dpm_regs *regs)
|
|
+{
|
|
+ /*
|
|
+ * Get and save some boot-time conditions.
|
|
+ */
|
|
+ jz_init_boot_config();
|
|
+
|
|
+#ifdef CHANGE_PLL
|
|
+ /*
|
|
+ * Disable LCD before scaling pll.
|
|
+ * LCD and LCD pixel clocks should not be changed even if the PLL
|
|
+ * output frequency has been changed.
|
|
+ */
|
|
+ REG_LCD_CTRL &= ~LCD_CTRL_ENA;
|
|
+
|
|
+ /*
|
|
+ * Stop module clocks before scaling PLL
|
|
+ */
|
|
+ __cpm_stop_eth();
|
|
+ __cpm_stop_aic(1);
|
|
+ __cpm_stop_aic(2);
|
|
+#endif
|
|
+
|
|
+ /* ... add more as necessary */
|
|
+
|
|
+ if (regs->pll_up_flag == PLL_GOES_UP) {
|
|
+ /* the pll frequency is going up, so change dividors first */
|
|
+ jz_scale_divisors(regs);
|
|
+#ifdef CHANGE_PLL
|
|
+ jz_scale_pll(regs);
|
|
+#endif
|
|
+ }
|
|
+ else if (regs->pll_up_flag == PLL_GOES_DOWN) {
|
|
+ /* the pll frequency is going down, so change pll first */
|
|
+#ifdef CHANGE_PLL
|
|
+ jz_scale_pll(regs);
|
|
+#endif
|
|
+ jz_scale_divisors(regs);
|
|
+ }
|
|
+ else {
|
|
+ /* the pll frequency is unchanged, so change divisors only */
|
|
+ jz_scale_divisors(regs);
|
|
+ }
|
|
+
|
|
+#ifdef CHANGE_PLL
|
|
+ /*
|
|
+ * Restart module clocks before scaling PLL
|
|
+ */
|
|
+ __cpm_start_eth();
|
|
+ __cpm_start_aic(1);
|
|
+ __cpm_start_aic(2);
|
|
+
|
|
+ /* ... add more as necessary */
|
|
+
|
|
+ /* Scale the LCD divisors after scaling pll */
|
|
+ if (regs->pll_up_flag != PLL_UNCHANGED) {
|
|
+ jz_scale_lcd_divisors(regs);
|
|
+ }
|
|
+
|
|
+ /* Enable LCD controller */
|
|
+ REG_LCD_CTRL &= ~LCD_CTRL_DIS;
|
|
+ REG_LCD_CTRL |= LCD_CTRL_ENA;
|
|
+#endif
|
|
+
|
|
+ /* Update system clocks */
|
|
+ jz_update_clocks();
|
|
+}
|
|
+
|
|
+extern unsigned int idle_times;
|
|
+static unsigned int jz4740_freq_get(unsigned int cpu)
|
|
+{
|
|
+ return (__cpm_get_cclk() / 1000);
|
|
+}
|
|
+
|
|
+static unsigned int index_to_divisor(unsigned int index, struct dpm_regs *regs)
|
|
+{
|
|
+ int n2FR[33] = {
|
|
+ 0, 0, 1, 2, 3, 0, 4, 0, 5, 0, 0, 0, 6, 0, 0, 0,
|
|
+ 7, 0, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 0, 0,
|
|
+ 9
|
|
+ };
|
|
+ int div[4] = {1, 2, 2, 2}; /* divisors of I:S:P:M */
|
|
+ unsigned int div_of_cclk, new_freq, i;
|
|
+
|
|
+ regs->pll_up_flag = PLL_UNCHANGED;
|
|
+ regs->cpccr_mask = CPM_CPCCR_CDIV_MASK | CPM_CPCCR_HDIV_MASK | CPM_CPCCR_PDIV_MASK | CPM_CPCCR_MDIV_MASK;
|
|
+
|
|
+ new_freq = jz4740_freq_table.table[index].frequency;
|
|
+
|
|
+ do {
|
|
+ div_of_cclk = __cpm_get_pllout() / (1000 * new_freq);
|
|
+ } while (div_of_cclk==0);
|
|
+
|
|
+ if(div_of_cclk == 1 || div_of_cclk == 2 || div_of_cclk == 4) {
|
|
+ for(i = 1; i<4; i++) {
|
|
+ div[i] = 3;
|
|
+ }
|
|
+ } else {
|
|
+ for(i = 1; i<4; i++) {
|
|
+ div[i] = 2;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ for(i = 0; i<4; i++) {
|
|
+ div[i] *= div_of_cclk;
|
|
+ }
|
|
+
|
|
+ dprintk("divisors of I:S:P:M = %d:%d:%d:%d\n", div[0], div[1], div[2], div[3]);
|
|
+
|
|
+ regs->cpccr =
|
|
+ (n2FR[div[0]] << CPM_CPCCR_CDIV_BIT) |
|
|
+ (n2FR[div[1]] << CPM_CPCCR_HDIV_BIT) |
|
|
+ (n2FR[div[2]] << CPM_CPCCR_PDIV_BIT) |
|
|
+ (n2FR[div[3]] << CPM_CPCCR_MDIV_BIT);
|
|
+
|
|
+ return div_of_cclk;
|
|
+}
|
|
+
|
|
+static void jz4740_set_cpu_divider_index(unsigned int cpu, unsigned int index)
|
|
+{
|
|
+ unsigned long divisor, old_divisor;
|
|
+ struct cpufreq_freqs freqs;
|
|
+ struct dpm_regs regs;
|
|
+
|
|
+ old_divisor = __cpm_get_pllout() / __cpm_get_cclk();
|
|
+ divisor = index_to_divisor(index, ®s);
|
|
+
|
|
+ freqs.old = __cpm_get_cclk() / 1000;
|
|
+ freqs.new = __cpm_get_pllout() / (1000 * divisor);
|
|
+ freqs.cpu = cpu;
|
|
+
|
|
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
|
|
+
|
|
+ if (old_divisor != divisor)
|
|
+ jz4740_transition(®s);
|
|
+
|
|
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
|
|
+}
|
|
+
|
|
+static int jz4740_freq_target(struct cpufreq_policy *policy,
|
|
+ unsigned int target_freq,
|
|
+ unsigned int relation)
|
|
+{
|
|
+ unsigned int new_index = 0;
|
|
+
|
|
+ if (cpufreq_frequency_table_target(policy,
|
|
+ &jz4740_freq_table.table[0],
|
|
+ target_freq, relation, &new_index))
|
|
+ return -EINVAL;
|
|
+
|
|
+ jz4740_set_cpu_divider_index(policy->cpu, new_index);
|
|
+
|
|
+ dprintk("new frequency is %d KHz (REG_CPM_CPCCR:0x%x)\n", __cpm_get_cclk() / 1000, REG_CPM_CPCCR);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int jz4740_freq_verify(struct cpufreq_policy *policy)
|
|
+{
|
|
+ return cpufreq_frequency_table_verify(policy,
|
|
+ &jz4740_freq_table.table[0]);
|
|
+}
|
|
+
|
|
+static int __init jz4740_cpufreq_driver_init(struct cpufreq_policy *policy)
|
|
+{
|
|
+
|
|
+ struct cpufreq_frequency_table *table = &jz4740_freq_table.table[0];
|
|
+ unsigned int MAX_FREQ;
|
|
+
|
|
+ dprintk(KERN_INFO "Jz4740 cpufreq driver\n");
|
|
+
|
|
+ if (policy->cpu != 0)
|
|
+ return -EINVAL;
|
|
+
|
|
+ policy->cur = MAX_FREQ = __cpm_get_cclk() / 1000; /* in kHz. Current and max frequency is determined by u-boot */
|
|
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
|
|
+
|
|
+ policy->cpuinfo.min_freq = MAX_FREQ/8;
|
|
+ policy->cpuinfo.max_freq = MAX_FREQ;
|
|
+ policy->cpuinfo.transition_latency = 100000; /* in 10^(-9) s = nanoseconds */
|
|
+
|
|
+ table[0].index = 0;
|
|
+ table[0].frequency = MAX_FREQ/8;
|
|
+ table[1].index = 1;
|
|
+ table[1].frequency = MAX_FREQ/6;
|
|
+ table[2].index = 2;
|
|
+ table[2].frequency = MAX_FREQ/4;
|
|
+ table[3].index = 3;
|
|
+ table[3].frequency = MAX_FREQ/3;
|
|
+ table[4].index = 4;
|
|
+ table[4].frequency = MAX_FREQ/2;
|
|
+ table[5].index = 5;
|
|
+ table[5].frequency = MAX_FREQ;
|
|
+ table[6].index = 6;
|
|
+ table[6].frequency = CPUFREQ_TABLE_END;
|
|
+
|
|
+#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
|
|
+ cpufreq_frequency_table_get_attr(table, policy->cpu); /* for showing /sys/devices/system/cpu/cpuX/cpufreq/stats/ */
|
|
+#endif
|
|
+
|
|
+ return cpufreq_frequency_table_cpuinfo(policy, table);
|
|
+}
|
|
+
|
|
+static struct cpufreq_driver cpufreq_jz4740_driver = {
|
|
+// .flags = CPUFREQ_STICKY,
|
|
+ .init = jz4740_cpufreq_driver_init,
|
|
+ .verify = jz4740_freq_verify,
|
|
+ .target = jz4740_freq_target,
|
|
+ .get = jz4740_freq_get,
|
|
+ .name = "jz4740",
|
|
+};
|
|
+
|
|
+static int __init jz4740_cpufreq_init(void)
|
|
+{
|
|
+ return cpufreq_register_driver(&cpufreq_jz4740_driver);
|
|
+}
|
|
+
|
|
+static void __exit jz4740_cpufreq_exit(void)
|
|
+{
|
|
+ cpufreq_unregister_driver(&cpufreq_jz4740_driver);
|
|
+}
|
|
+
|
|
+module_init(jz4740_cpufreq_init);
|
|
+module_exit(jz4740_cpufreq_exit);
|
|
+
|
|
+MODULE_AUTHOR("Regen <lhhuang@ingenic.cn>");
|
|
+MODULE_DESCRIPTION("cpufreq driver for Jz4740");
|
|
+MODULE_LICENSE("GPL");
|
|
+
|
|
--- linux-2.6.24.7.old/arch/mips/jz4740/dma.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4740/dma.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,768 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4740/dma.c
|
|
+ *
|
|
+ * Support functions for the JZ4740 internal DMA channels.
|
|
+ * No-descriptor transfer only.
|
|
+ * Descriptor transfer should also call jz_request_dma() to get a free
|
|
+ * channel and call jz_free_dma() to free the channel. And driver should
|
|
+ * build the DMA descriptor and setup the DMA channel by itself.
|
|
+ *
|
|
+ * Copyright (C) 2006 Ingenic Semiconductor Inc.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License as published by the
|
|
+ * Free Software Foundation; either version 2 of the License, or (at your
|
|
+ * option) any later version.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/errno.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/spinlock.h>
|
|
+#include <linux/string.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/soundcard.h>
|
|
+
|
|
+#include <asm/system.h>
|
|
+#include <asm/addrspace.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+/*
|
|
+ * A note on resource allocation:
|
|
+ *
|
|
+ * All drivers needing DMA channels, should allocate and release them
|
|
+ * through the public routines `jz_request_dma()' and `jz_free_dma()'.
|
|
+ *
|
|
+ * In order to avoid problems, all processes should allocate resources in
|
|
+ * the same sequence and release them in the reverse order.
|
|
+ *
|
|
+ * So, when allocating DMAs and IRQs, first allocate the DMA, then the IRQ.
|
|
+ * When releasing them, first release the IRQ, then release the DMA. The
|
|
+ * main reason for this order is that, if you are requesting the DMA buffer
|
|
+ * done interrupt, you won't know the irq number until the DMA channel is
|
|
+ * returned from jz_request_dma().
|
|
+ */
|
|
+
|
|
+struct jz_dma_chan jz_dma_table[MAX_DMA_NUM] = {
|
|
+ {dev_id:-1,},
|
|
+ {dev_id:-1,},
|
|
+ {dev_id:-1,},
|
|
+ {dev_id:-1,},
|
|
+ {dev_id:-1,},
|
|
+ {dev_id:-1,},
|
|
+};
|
|
+
|
|
+// Device FIFO addresses and default DMA modes
|
|
+static const struct {
|
|
+ unsigned int fifo_addr;
|
|
+ unsigned int dma_mode;
|
|
+ unsigned int dma_source;
|
|
+} dma_dev_table[DMA_ID_MAX] = {
|
|
+ {CPHYSADDR(UART0_TDR), DMA_8BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_UART0OUT},
|
|
+ {CPHYSADDR(UART0_RDR), DMA_8BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_UART0IN},
|
|
+ {CPHYSADDR(SSI_DR), DMA_32BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_SSIOUT},
|
|
+ {CPHYSADDR(SSI_DR), DMA_32BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_SSIIN},
|
|
+ {CPHYSADDR(AIC_DR), DMA_32BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_AICOUT},
|
|
+ {CPHYSADDR(AIC_DR), DMA_32BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_AICIN},
|
|
+ {CPHYSADDR(MSC_TXFIFO), DMA_32BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_MSCOUT},
|
|
+ {CPHYSADDR(MSC_RXFIFO), DMA_32BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_MSCIN},
|
|
+ {0, DMA_AUTOINIT, DMAC_DRSR_RS_TCU},
|
|
+ {0, DMA_AUTOINIT, DMAC_DRSR_RS_AUTO},
|
|
+ {},
|
|
+};
|
|
+
|
|
+
|
|
+int jz_dma_read_proc(char *buf, char **start, off_t fpos,
|
|
+ int length, int *eof, void *data)
|
|
+{
|
|
+ int i, len = 0;
|
|
+ struct jz_dma_chan *chan;
|
|
+
|
|
+ for (i = 0; i < MAX_DMA_NUM; i++) {
|
|
+ if ((chan = get_dma_chan(i)) != NULL) {
|
|
+ len += sprintf(buf + len, "%2d: %s\n",
|
|
+ i, chan->dev_str);
|
|
+ }
|
|
+ }
|
|
+
|
|
+ if (fpos >= len) {
|
|
+ *start = buf;
|
|
+ *eof = 1;
|
|
+ return 0;
|
|
+ }
|
|
+ *start = buf + fpos;
|
|
+ if ((len -= fpos) > length)
|
|
+ return length;
|
|
+ *eof = 1;
|
|
+ return len;
|
|
+}
|
|
+
|
|
+
|
|
+void dump_jz_dma_channel(unsigned int dmanr)
|
|
+{
|
|
+ struct jz_dma_chan *chan;
|
|
+
|
|
+ if (dmanr > MAX_DMA_NUM)
|
|
+ return;
|
|
+ chan = &jz_dma_table[dmanr];
|
|
+
|
|
+ printk("DMA%d Registers:\n", dmanr);
|
|
+ printk(" DMACR = 0x%08x\n", REG_DMAC_DMACR);
|
|
+ printk(" DSAR = 0x%08x\n", REG_DMAC_DSAR(dmanr));
|
|
+ printk(" DTAR = 0x%08x\n", REG_DMAC_DTAR(dmanr));
|
|
+ printk(" DTCR = 0x%08x\n", REG_DMAC_DTCR(dmanr));
|
|
+ printk(" DRSR = 0x%08x\n", REG_DMAC_DRSR(dmanr));
|
|
+ printk(" DCCSR = 0x%08x\n", REG_DMAC_DCCSR(dmanr));
|
|
+ printk(" DCMD = 0x%08x\n", REG_DMAC_DCMD(dmanr));
|
|
+ printk(" DDA = 0x%08x\n", REG_DMAC_DDA(dmanr));
|
|
+ printk(" DMADBR = 0x%08x\n", REG_DMAC_DMADBR);
|
|
+}
|
|
+
|
|
+
|
|
+/**
|
|
+ * jz_request_dma - dynamically allcate an idle DMA channel to return
|
|
+ * @dev_id: the specified dma device id or DMA_ID_RAW_SET
|
|
+ * @dev_str: the specified dma device string name
|
|
+ * @irqhandler: the irq handler, or NULL
|
|
+ * @irqflags: the irq handler flags
|
|
+ * @irq_dev_id: the irq handler device id for shared irq
|
|
+ *
|
|
+ * Finds a free channel, and binds the requested device to it.
|
|
+ * Returns the allocated channel number, or negative on error.
|
|
+ * Requests the DMA done IRQ if irqhandler != NULL.
|
|
+ *
|
|
+*/
|
|
+/*int jz_request_dma(int dev_id, const char *dev_str,
|
|
+ void (*irqhandler)(int, void *, struct pt_regs *),
|
|
+ unsigned long irqflags,
|
|
+ void *irq_dev_id)
|
|
+*/
|
|
+
|
|
+int jz_request_dma(int dev_id, const char *dev_str,
|
|
+ irqreturn_t (*irqhandler)(int, void *),
|
|
+ unsigned long irqflags,
|
|
+ void *irq_dev_id)
|
|
+{
|
|
+ struct jz_dma_chan *chan;
|
|
+ int i, ret;
|
|
+
|
|
+ if (dev_id < 0 || dev_id >= DMA_ID_MAX)
|
|
+ return -EINVAL;
|
|
+
|
|
+ for (i = 0; i < MAX_DMA_NUM; i++) {
|
|
+ if (jz_dma_table[i].dev_id < 0)
|
|
+ break;
|
|
+ }
|
|
+ if (i == MAX_DMA_NUM) /* no free channel */
|
|
+ return -ENODEV;
|
|
+
|
|
+ /* we got a free channel */
|
|
+ chan = &jz_dma_table[i];
|
|
+
|
|
+ if (irqhandler) {
|
|
+ chan->irq = IRQ_DMA_0 + i; // allocate irq number
|
|
+ chan->irq_dev = irq_dev_id;
|
|
+ if ((ret = request_irq(chan->irq, irqhandler, irqflags,
|
|
+ dev_str, chan->irq_dev))) {
|
|
+ chan->irq = -1;
|
|
+ chan->irq_dev = NULL;
|
|
+ return ret;
|
|
+ }
|
|
+ } else {
|
|
+ chan->irq = -1;
|
|
+ chan->irq_dev = NULL;
|
|
+ }
|
|
+
|
|
+ // fill it in
|
|
+ chan->io = i;
|
|
+ chan->dev_id = dev_id;
|
|
+ chan->dev_str = dev_str;
|
|
+ chan->fifo_addr = dma_dev_table[dev_id].fifo_addr;
|
|
+ chan->mode = dma_dev_table[dev_id].dma_mode;
|
|
+ chan->source = dma_dev_table[dev_id].dma_source;
|
|
+
|
|
+ return i;
|
|
+}
|
|
+
|
|
+void jz_free_dma(unsigned int dmanr)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan) {
|
|
+ printk("Trying to free DMA%d\n", dmanr);
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ disable_dma(dmanr);
|
|
+ if (chan->irq)
|
|
+ free_irq(chan->irq, chan->irq_dev);
|
|
+
|
|
+ chan->irq = -1;
|
|
+ chan->irq_dev = NULL;
|
|
+ chan->dev_id = -1;
|
|
+}
|
|
+
|
|
+void jz_set_dma_dest_width(int dmanr, int nbit)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ chan->mode &= ~DMAC_DCMD_DWDH_MASK;
|
|
+ switch (nbit) {
|
|
+ case 8:
|
|
+ chan->mode |= DMAC_DCMD_DWDH_8;
|
|
+ break;
|
|
+ case 16:
|
|
+ chan->mode |= DMAC_DCMD_DWDH_16;
|
|
+ break;
|
|
+ case 32:
|
|
+ chan->mode |= DMAC_DCMD_DWDH_32;
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+void jz_set_dma_src_width(int dmanr, int nbit)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ chan->mode &= ~DMAC_DCMD_SWDH_MASK;
|
|
+ switch (nbit) {
|
|
+ case 8:
|
|
+ chan->mode |= DMAC_DCMD_SWDH_8;
|
|
+ break;
|
|
+ case 16:
|
|
+ chan->mode |= DMAC_DCMD_SWDH_16;
|
|
+ break;
|
|
+ case 32:
|
|
+ chan->mode |= DMAC_DCMD_SWDH_32;
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+void jz_set_dma_block_size(int dmanr, int nbyte)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ chan->mode &= ~DMAC_DCMD_DS_MASK;
|
|
+ switch (nbyte) {
|
|
+ case 1:
|
|
+ chan->mode |= DMAC_DCMD_DS_8BIT;
|
|
+ break;
|
|
+ case 2:
|
|
+ chan->mode |= DMAC_DCMD_DS_16BIT;
|
|
+ break;
|
|
+ case 4:
|
|
+ chan->mode |= DMAC_DCMD_DS_32BIT;
|
|
+ break;
|
|
+ case 16:
|
|
+ chan->mode |= DMAC_DCMD_DS_16BYTE;
|
|
+ break;
|
|
+ case 32:
|
|
+ chan->mode |= DMAC_DCMD_DS_32BYTE;
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+unsigned int jz_get_dma_command(int dmanr)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+ return chan->mode;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * jz_set_dma_mode - do the raw settings for the specified DMA channel
|
|
+ * @dmanr: the specified DMA channel
|
|
+ * @mode: dma operate mode, DMA_MODE_READ or DMA_MODE_WRITE
|
|
+ * @dma_mode: dma raw mode
|
|
+ * @dma_source: dma raw request source
|
|
+ * @fifo_addr: dma raw device fifo address
|
|
+ *
|
|
+ * Ensure call jz_request_dma(DMA_ID_RAW_SET, ...) first, then call
|
|
+ * jz_set_dma_mode() rather than set_dma_mode() if you work with
|
|
+ * and external request dma device.
|
|
+ *
|
|
+ * NOTE: Don not dynamically allocate dma channel if one external request
|
|
+ * dma device will occupy this channel.
|
|
+*/
|
|
+int jz_set_dma_mode(unsigned int dmanr, unsigned int mode,
|
|
+ unsigned int dma_mode, unsigned int dma_source,
|
|
+ unsigned int fifo_addr)
|
|
+{
|
|
+ int dev_id, i;
|
|
+ struct jz_dma_chan *chan;
|
|
+
|
|
+ if (dmanr > MAX_DMA_NUM)
|
|
+ return -ENODEV;
|
|
+ for (i = 0; i < MAX_DMA_NUM; i++) {
|
|
+ if (jz_dma_table[i].dev_id < 0)
|
|
+ break;
|
|
+ }
|
|
+ if (i == MAX_DMA_NUM)
|
|
+ return -ENODEV;
|
|
+
|
|
+ chan = &jz_dma_table[dmanr];
|
|
+ dev_id = chan->dev_id;
|
|
+ if (dev_id > 0) {
|
|
+ printk(KERN_DEBUG "%s sets the allocated DMA channel %d!\n",
|
|
+ __FUNCTION__, dmanr);
|
|
+ return -ENODEV;
|
|
+ }
|
|
+
|
|
+ /* clone it from the dynamically allocated. */
|
|
+ if (i != dmanr) {
|
|
+ chan->irq = jz_dma_table[i].irq;
|
|
+ chan->irq_dev = jz_dma_table[i].irq_dev;
|
|
+ chan->dev_str = jz_dma_table[i].dev_str;
|
|
+ jz_dma_table[i].irq = 0;
|
|
+ jz_dma_table[i].irq_dev = NULL;
|
|
+ jz_dma_table[i].dev_id = -1;
|
|
+ }
|
|
+ chan->dev_id = DMA_ID_RAW_SET;
|
|
+ chan->io = dmanr;
|
|
+ chan->fifo_addr = fifo_addr;
|
|
+ chan->mode = dma_mode;
|
|
+ chan->source = dma_source;
|
|
+
|
|
+ set_dma_mode(dmanr, dma_mode);
|
|
+
|
|
+ return dmanr;
|
|
+}
|
|
+
|
|
+void enable_dma(unsigned int dmanr)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ REG_DMAC_DCCSR(dmanr) &= ~(DMAC_DCCSR_HLT | DMAC_DCCSR_TT | DMAC_DCCSR_AR);
|
|
+ REG_DMAC_DCCSR(dmanr) |= DMAC_DCCSR_NDES; /* No-descriptor transfer */
|
|
+ __dmac_enable_channel(dmanr);
|
|
+ if (chan->irq)
|
|
+ __dmac_channel_enable_irq(dmanr);
|
|
+}
|
|
+
|
|
+#define DMA_DISABLE_POLL 0x10000
|
|
+
|
|
+void disable_dma(unsigned int dmanr)
|
|
+{
|
|
+ int i;
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ if (!__dmac_channel_enabled(dmanr))
|
|
+ return;
|
|
+
|
|
+ for (i = 0; i < DMA_DISABLE_POLL; i++)
|
|
+ if (__dmac_channel_transmit_end_detected(dmanr))
|
|
+ break;
|
|
+#if 0
|
|
+ if (i == DMA_DISABLE_POLL)
|
|
+ printk(KERN_INFO "disable_dma: poll expired!\n");
|
|
+#endif
|
|
+
|
|
+ __dmac_disable_channel(dmanr);
|
|
+ if (chan->irq)
|
|
+ __dmac_channel_disable_irq(dmanr);
|
|
+}
|
|
+
|
|
+/* Note: DMA_MODE_MASK is simulated by sw */
|
|
+void set_dma_mode(unsigned int dmanr, unsigned int mode)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ chan->mode |= mode & ~(DMAC_DCMD_SAI | DMAC_DCMD_DAI);
|
|
+ mode &= DMA_MODE_MASK;
|
|
+ if (mode == DMA_MODE_READ) {
|
|
+ chan->mode |= DMAC_DCMD_DAI;
|
|
+ chan->mode &= ~DMAC_DCMD_SAI;
|
|
+ } else if (mode == DMA_MODE_WRITE) {
|
|
+ chan->mode |= DMAC_DCMD_SAI;
|
|
+ chan->mode &= ~DMAC_DCMD_DAI;
|
|
+ } else {
|
|
+ printk(KERN_DEBUG "set_dma_mode() just supports DMA_MODE_READ or DMA_MODE_WRITE!\n");
|
|
+ }
|
|
+ REG_DMAC_DCMD(chan->io) = chan->mode & ~DMA_MODE_MASK;
|
|
+ REG_DMAC_DRSR(chan->io) = chan->source;
|
|
+}
|
|
+
|
|
+void set_dma_addr(unsigned int dmanr, unsigned int phyaddr)
|
|
+{
|
|
+ unsigned int mode;
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ mode = chan->mode & DMA_MODE_MASK;
|
|
+ if (mode == DMA_MODE_READ) {
|
|
+ REG_DMAC_DSAR(chan->io) = chan->fifo_addr;
|
|
+ REG_DMAC_DTAR(chan->io) = phyaddr;
|
|
+ } else if (mode == DMA_MODE_WRITE) {
|
|
+ REG_DMAC_DSAR(chan->io) = phyaddr;
|
|
+ REG_DMAC_DTAR(chan->io) = chan->fifo_addr;
|
|
+ } else
|
|
+ printk(KERN_DEBUG "Driver should call set_dma_mode() ahead set_dma_addr()!\n");
|
|
+}
|
|
+
|
|
+void set_dma_count(unsigned int dmanr, unsigned int bytecnt)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+ int dma_ds[] = {4, 1, 2, 16, 32};
|
|
+ unsigned int ds;
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ ds = (chan->mode & DMAC_DCMD_DS_MASK) >> DMAC_DCMD_DS_BIT;
|
|
+ REG_DMAC_DTCR(chan->io) = bytecnt / dma_ds[ds]; // transfer count
|
|
+}
|
|
+
|
|
+unsigned int get_dma_residue(unsigned int dmanr)
|
|
+{
|
|
+ unsigned int count, ds;
|
|
+ int dma_ds[] = {4, 1, 2, 16, 32};
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+ if (!chan)
|
|
+ return 0;
|
|
+
|
|
+ ds = (chan->mode & DMAC_DCMD_DS_MASK) >> DMAC_DCMD_DS_BIT;
|
|
+ count = REG_DMAC_DTCR(chan->io);
|
|
+ count = count * dma_ds[ds];
|
|
+
|
|
+ return count;
|
|
+}
|
|
+
|
|
+void jz_set_oss_dma(unsigned int dmanr, unsigned int mode, unsigned int audio_fmt)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ switch (audio_fmt) {
|
|
+ case AFMT_U8:
|
|
+ /* burst mode : 32BIT */
|
|
+ break;
|
|
+ case AFMT_S16_LE:
|
|
+ /* burst mode : 16BYTE */
|
|
+ if (mode == DMA_MODE_READ) {
|
|
+ chan->mode = DMA_AIC_32_16BYTE_RX_CMD | DMA_MODE_READ;
|
|
+ chan->mode |= mode & ~(DMAC_DCMD_SAI | DMAC_DCMD_DAI);
|
|
+ mode &= DMA_MODE_MASK;
|
|
+ chan->mode |= DMAC_DCMD_DAI;
|
|
+ chan->mode &= ~DMAC_DCMD_SAI;
|
|
+ } else if (mode == DMA_MODE_WRITE) {
|
|
+ chan->mode = DMA_AIC_32_16BYTE_TX_CMD | DMA_MODE_WRITE;
|
|
+ chan->mode |= mode & ~(DMAC_DCMD_SAI | DMAC_DCMD_DAI);
|
|
+ mode &= DMA_MODE_MASK;
|
|
+ chan->mode |= DMAC_DCMD_SAI;
|
|
+ chan->mode &= ~DMAC_DCMD_DAI;
|
|
+ } else
|
|
+ printk("oss_dma_burst_mode() just supports DMA_MODE_READ or DMA_MODE_WRITE!\n");
|
|
+
|
|
+ REG_DMAC_DCMD(chan->io) = chan->mode & ~DMA_MODE_MASK;
|
|
+ REG_DMAC_DRSR(chan->io) = chan->source;
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+void jz_set_alsa_dma(unsigned int dmanr, unsigned int mode, unsigned int audio_fmt)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ switch (audio_fmt) {
|
|
+ case 8:
|
|
+ /* SNDRV_PCM_FORMAT_S8 burst mode : 32BIT */
|
|
+ break;
|
|
+ case 16:
|
|
+ /* SNDRV_PCM_FORMAT_S16_LE burst mode : 16BYTE */
|
|
+ if (mode == DMA_MODE_READ) {
|
|
+ chan->mode = DMA_AIC_16BYTE_RX_CMD | DMA_MODE_READ;
|
|
+ chan->mode |= mode & ~(DMAC_DCMD_SAI | DMAC_DCMD_DAI);
|
|
+ mode &= DMA_MODE_MASK;
|
|
+ chan->mode |= DMAC_DCMD_DAI;
|
|
+ chan->mode &= ~DMAC_DCMD_SAI;
|
|
+ } else if (mode == DMA_MODE_WRITE) {
|
|
+ chan->mode = DMA_AIC_16BYTE_TX_CMD | DMA_MODE_WRITE;
|
|
+ chan->mode |= mode & ~(DMAC_DCMD_SAI | DMAC_DCMD_DAI);
|
|
+ mode &= DMA_MODE_MASK;
|
|
+ chan->mode |= DMAC_DCMD_SAI;
|
|
+ chan->mode &= ~DMAC_DCMD_DAI;
|
|
+ } else
|
|
+ printk("alsa_dma_burst_mode() just supports DMA_MODE_READ or DMA_MODE_WRITE!\n");
|
|
+
|
|
+ REG_DMAC_DCMD(chan->io) = chan->mode & ~DMA_MODE_MASK;
|
|
+ REG_DMAC_DRSR(chan->io) = chan->source;
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+#undef JZ4740_DMAC_TEST_ENABLE
|
|
+
|
|
+#ifdef JZ4740_DMAC_TEST_ENABLE
|
|
+
|
|
+/*
|
|
+ * DMA test: external address <--> external address
|
|
+ */
|
|
+#define TEST_DMA_SIZE 16*1024
|
|
+
|
|
+static jz_dma_desc *dma_desc;
|
|
+
|
|
+static int dma_chan;
|
|
+static dma_addr_t dma_desc_phys_addr;
|
|
+static unsigned int dma_src_addr, dma_src_phys_addr, dma_dst_addr, dma_dst_phys_addr;
|
|
+
|
|
+static int dma_check_result(void *src, void *dst, int size)
|
|
+{
|
|
+ unsigned int addr1, addr2, i, err = 0;
|
|
+
|
|
+ addr1 = (unsigned int)src;
|
|
+ addr2 = (unsigned int)dst;
|
|
+
|
|
+ for (i = 0; i < size; i += 4) {
|
|
+ if (*(volatile unsigned int *)addr1 != *(volatile unsigned int *)addr2) {
|
|
+ err++;
|
|
+ printk("wrong data at 0x%08x: src 0x%08x dst 0x%08x\n", addr2, *(volatile unsigned int *)addr1, *(volatile unsigned int *)addr2);
|
|
+ }
|
|
+ addr1 += 4;
|
|
+ addr2 += 4;
|
|
+ }
|
|
+ printk("check DMA result err=%d\n", err);
|
|
+ return err;
|
|
+}
|
|
+
|
|
+static void jz4740_dma_irq(int irq, void *dev_id, struct pt_regs *regs)
|
|
+{
|
|
+ printk("jz4740_dma_irq %d\n", irq);
|
|
+
|
|
+ REG_DMAC_DCCSR(dma_chan) &= ~DMAC_DCCSR_EN; /* disable DMA */
|
|
+
|
|
+ if (__dmac_channel_transmit_halt_detected(dma_chan)) {
|
|
+ printk("DMA HALT\n");
|
|
+ __dmac_channel_clear_transmit_halt(dma_chan);
|
|
+ }
|
|
+
|
|
+ if (__dmac_channel_address_error_detected(dma_chan)) {
|
|
+ printk("DMA ADDR ERROR\n");
|
|
+ __dmac_channel_clear_address_error(dma_chan);
|
|
+ }
|
|
+
|
|
+ if (__dmac_channel_descriptor_invalid_detected(dma_chan)) {
|
|
+ printk("DMA DESC INVALID\n");
|
|
+ __dmac_channel_clear_descriptor_invalid(dma_chan);
|
|
+ }
|
|
+
|
|
+ if (__dmac_channel_count_terminated_detected(dma_chan)) {
|
|
+ printk("DMA CT\n");
|
|
+ __dmac_channel_clear_count_terminated(dma_chan);
|
|
+ }
|
|
+
|
|
+ if (__dmac_channel_transmit_end_detected(dma_chan)) {
|
|
+ printk("DMA TT\n");
|
|
+ __dmac_channel_clear_transmit_end(dma_chan);
|
|
+ dump_jz_dma_channel(dma_chan);
|
|
+ dma_check_result((void *)dma_src_addr, (void *)dma_dst_addr, TEST_DMA_SIZE);
|
|
+ }
|
|
+
|
|
+ /* free buffers */
|
|
+ printk("free DMA buffers\n");
|
|
+ free_pages(dma_src_addr, 2);
|
|
+ free_pages(dma_dst_addr, 2);
|
|
+
|
|
+ if (dma_desc)
|
|
+ free_pages((unsigned int)dma_desc, 0);
|
|
+
|
|
+ /* free dma */
|
|
+ jz_free_dma(dma_chan);
|
|
+}
|
|
+
|
|
+void dma_nodesc_test(void)
|
|
+{
|
|
+ unsigned int addr, i;
|
|
+
|
|
+ printk("dma_nodesc_test\n");
|
|
+
|
|
+ /* Request DMA channel and setup irq handler */
|
|
+ dma_chan = jz_request_dma(DMA_ID_AUTO, "auto", jz4740_dma_irq,
|
|
+ SA_INTERRUPT, NULL);
|
|
+ if (dma_chan < 0) {
|
|
+ printk("Setup irq failed\n");
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ printk("Requested DMA channel = %d\n", dma_chan);
|
|
+
|
|
+ /* Allocate DMA buffers */
|
|
+ dma_src_addr = __get_free_pages(GFP_KERNEL, 2); /* 16KB */
|
|
+ dma_dst_addr = __get_free_pages(GFP_KERNEL, 2); /* 16KB */
|
|
+
|
|
+ dma_src_phys_addr = CPHYSADDR(dma_src_addr);
|
|
+ dma_dst_phys_addr = CPHYSADDR(dma_dst_addr);
|
|
+
|
|
+ printk("Buffer addresses: 0x%08x 0x%08x 0x%08x 0x%08x\n",
|
|
+ dma_src_addr, dma_src_phys_addr, dma_dst_addr, dma_dst_phys_addr);
|
|
+
|
|
+ /* Prepare data for source buffer */
|
|
+ addr = (unsigned int)dma_src_addr;
|
|
+ for (i = 0; i < TEST_DMA_SIZE; i += 4) {
|
|
+ *(volatile unsigned int *)addr = addr;
|
|
+ addr += 4;
|
|
+ }
|
|
+ dma_cache_wback((unsigned long)dma_src_addr, TEST_DMA_SIZE);
|
|
+
|
|
+ /* Init target buffer */
|
|
+ memset((void *)dma_dst_addr, 0, TEST_DMA_SIZE);
|
|
+ dma_cache_wback((unsigned long)dma_dst_addr, TEST_DMA_SIZE);
|
|
+
|
|
+ /* Init DMA module */
|
|
+ printk("Starting DMA\n");
|
|
+ REG_DMAC_DMACR = 0;
|
|
+ REG_DMAC_DCCSR(dma_chan) = 0;
|
|
+ REG_DMAC_DRSR(dma_chan) = DMAC_DRSR_RS_AUTO;
|
|
+ REG_DMAC_DSAR(dma_chan) = dma_src_phys_addr;
|
|
+ REG_DMAC_DTAR(dma_chan) = dma_dst_phys_addr;
|
|
+ REG_DMAC_DTCR(dma_chan) = 512;
|
|
+ REG_DMAC_DCMD(dma_chan) = DMAC_DCMD_SAI | DMAC_DCMD_DAI | DMAC_DCMD_SWDH_32 | DMAC_DCMD_DWDH_32 | DMAC_DCMD_DS_32BYTE | DMAC_DCMD_TIE;
|
|
+ REG_DMAC_DCCSR(dma_chan) = DMAC_DCCSR_NDES | DMAC_DCCSR_EN;
|
|
+ REG_DMAC_DMACR = DMAC_DMACR_DMAE; /* global DMA enable bit */
|
|
+
|
|
+ printk("DMA started. IMR=%08x\n", REG_INTC_IMR);
|
|
+}
|
|
+
|
|
+void dma_desc_test(void)
|
|
+{
|
|
+ unsigned int next, addr, i;
|
|
+ static jz_dma_desc *desc;
|
|
+
|
|
+ printk("dma_desc_test\n");
|
|
+
|
|
+ /* Request DMA channel and setup irq handler */
|
|
+ dma_chan = jz_request_dma(DMA_ID_AUTO, "auto", jz4740_dma_irq,
|
|
+ SA_INTERRUPT, NULL);
|
|
+ if (dma_chan < 0) {
|
|
+ printk("Setup irq failed\n");
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ printk("Requested DMA channel = %d\n", dma_chan);
|
|
+
|
|
+ /* Allocate DMA buffers */
|
|
+ dma_src_addr = __get_free_pages(GFP_KERNEL, 2); /* 16KB */
|
|
+ dma_dst_addr = __get_free_pages(GFP_KERNEL, 2); /* 16KB */
|
|
+
|
|
+ dma_src_phys_addr = CPHYSADDR(dma_src_addr);
|
|
+ dma_dst_phys_addr = CPHYSADDR(dma_dst_addr);
|
|
+
|
|
+ printk("Buffer addresses: 0x%08x 0x%08x 0x%08x 0x%08x\n",
|
|
+ dma_src_addr, dma_src_phys_addr, dma_dst_addr, dma_dst_phys_addr);
|
|
+
|
|
+ /* Prepare data for source buffer */
|
|
+ addr = (unsigned int)dma_src_addr;
|
|
+ for (i = 0; i < TEST_DMA_SIZE; i += 4) {
|
|
+ *(volatile unsigned int *)addr = addr;
|
|
+ addr += 4;
|
|
+ }
|
|
+ dma_cache_wback((unsigned long)dma_src_addr, TEST_DMA_SIZE);
|
|
+
|
|
+ /* Init target buffer */
|
|
+ memset((void *)dma_dst_addr, 0, TEST_DMA_SIZE);
|
|
+ dma_cache_wback((unsigned long)dma_dst_addr, TEST_DMA_SIZE);
|
|
+
|
|
+ /* Allocate DMA descriptors */
|
|
+ dma_desc = (jz_dma_desc *)__get_free_pages(GFP_KERNEL, 0);
|
|
+ dma_desc_phys_addr = CPHYSADDR((unsigned long)dma_desc);
|
|
+
|
|
+ printk("DMA descriptor address: 0x%08x 0x%08x\n", (u32)dma_desc, dma_desc_phys_addr);
|
|
+
|
|
+ /* Setup DMA descriptors */
|
|
+ desc = dma_desc;
|
|
+ next = (dma_desc_phys_addr + (sizeof(jz_dma_desc))) >> 4;
|
|
+
|
|
+ desc->dcmd = DMAC_DCMD_SAI | DMAC_DCMD_DAI | DMAC_DCMD_RDIL_IGN | DMAC_DCMD_SWDH_32 | DMAC_DCMD_DWDH_32 | DMAC_DCMD_DS_32BYTE | DMAC_DCMD_TM | DMAC_DCMD_DES_V | DMAC_DCMD_DES_VM | DMAC_DCMD_DES_VIE | DMAC_DCMD_TIE | DMAC_DCMD_LINK;
|
|
+ desc->dsadr = dma_src_phys_addr; /* DMA source address */
|
|
+ desc->dtadr = dma_dst_phys_addr; /* DMA target address */
|
|
+ desc->ddadr = (next << 24) + 128; /* size: 128*32 bytes = 4096 bytes */
|
|
+
|
|
+ desc++;
|
|
+ next = (dma_desc_phys_addr + 2*(sizeof(jz_dma_desc))) >> 4;
|
|
+
|
|
+ desc->dcmd = DMAC_DCMD_SAI | DMAC_DCMD_DAI | DMAC_DCMD_RDIL_IGN | DMAC_DCMD_SWDH_32 | DMAC_DCMD_DWDH_32 | DMAC_DCMD_DS_16BYTE | DMAC_DCMD_DES_V | DMAC_DCMD_DES_VM | DMAC_DCMD_DES_VIE | DMAC_DCMD_TIE | DMAC_DCMD_LINK;
|
|
+ desc->dsadr = dma_src_phys_addr + 4096; /* DMA source address */
|
|
+ desc->dtadr = dma_dst_phys_addr + 4096; /* DMA target address */
|
|
+ desc->ddadr = (next << 24) + 256; /* size: 256*16 bytes = 4096 bytes */
|
|
+
|
|
+ desc++;
|
|
+ next = (dma_desc_phys_addr + 3*(sizeof(jz_dma_desc))) >> 4;
|
|
+
|
|
+ desc->dcmd = DMAC_DCMD_SAI | DMAC_DCMD_DAI | DMAC_DCMD_RDIL_IGN | DMAC_DCMD_SWDH_32 | DMAC_DCMD_DWDH_32 | DMAC_DCMD_DS_16BYTE | DMAC_DCMD_DES_V | DMAC_DCMD_DES_VM | DMAC_DCMD_DES_VIE | DMAC_DCMD_TIE | DMAC_DCMD_LINK;
|
|
+ desc->dsadr = dma_src_phys_addr + 8192; /* DMA source address */
|
|
+ desc->dtadr = dma_dst_phys_addr + 8192; /* DMA target address */
|
|
+ desc->ddadr = (next << 24) + 256; /* size: 256*16 bytes = 4096 bytes */
|
|
+
|
|
+ desc++;
|
|
+ next = (dma_desc_phys_addr + 4*(sizeof(jz_dma_desc))) >> 4;
|
|
+
|
|
+ desc->dcmd = DMAC_DCMD_SAI | DMAC_DCMD_DAI | DMAC_DCMD_RDIL_IGN | DMAC_DCMD_SWDH_32 | DMAC_DCMD_DWDH_32 | DMAC_DCMD_DS_32BIT | DMAC_DCMD_DES_V | DMAC_DCMD_DES_VM | DMAC_DCMD_DES_VIE | DMAC_DCMD_TIE;
|
|
+ desc->dsadr = dma_src_phys_addr + 12*1024; /* DMA source address */
|
|
+ desc->dtadr = dma_dst_phys_addr + 12*1024; /* DMA target address */
|
|
+ desc->ddadr = (next << 24) + 1024; /* size: 1024*4 bytes = 4096 bytes */
|
|
+
|
|
+ dma_cache_wback((unsigned long)dma_desc, 4*(sizeof(jz_dma_desc)));
|
|
+
|
|
+ /* Setup DMA descriptor address */
|
|
+ REG_DMAC_DDA(dma_chan) = dma_desc_phys_addr;
|
|
+
|
|
+ /* Setup request source */
|
|
+ REG_DMAC_DRSR(dma_chan) = DMAC_DRSR_RS_AUTO;
|
|
+
|
|
+ /* Setup DMA channel control/status register */
|
|
+ REG_DMAC_DCCSR(dma_chan) = DMAC_DCCSR_EN; /* descriptor transfer, clear status, start channel */
|
|
+
|
|
+ /* Enable DMA */
|
|
+ REG_DMAC_DMACR = DMAC_DMACR_DMAE;
|
|
+
|
|
+ /* DMA doorbell set -- start DMA now ... */
|
|
+ REG_DMAC_DMADBSR = 1 << dma_chan;
|
|
+
|
|
+ printk("DMA started. IMR=%08x\n", REG_INTC_IMR);
|
|
+}
|
|
+
|
|
+#endif
|
|
+
|
|
+//EXPORT_SYMBOL_NOVERS(jz_dma_table);
|
|
+EXPORT_SYMBOL(jz_dma_table);
|
|
+EXPORT_SYMBOL(jz_request_dma);
|
|
+EXPORT_SYMBOL(jz_free_dma);
|
|
+EXPORT_SYMBOL(jz_set_dma_src_width);
|
|
+EXPORT_SYMBOL(jz_set_dma_dest_width);
|
|
+EXPORT_SYMBOL(jz_set_dma_block_size);
|
|
+EXPORT_SYMBOL(jz_set_dma_mode);
|
|
+EXPORT_SYMBOL(set_dma_mode);
|
|
+EXPORT_SYMBOL(jz_set_oss_dma);
|
|
+EXPORT_SYMBOL(jz_set_alsa_dma);
|
|
+EXPORT_SYMBOL(set_dma_addr);
|
|
+EXPORT_SYMBOL(set_dma_count);
|
|
+EXPORT_SYMBOL(get_dma_residue);
|
|
+EXPORT_SYMBOL(enable_dma);
|
|
+EXPORT_SYMBOL(disable_dma);
|
|
+EXPORT_SYMBOL(dump_jz_dma_channel);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4740/i2c.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4740/i2c.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,273 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4740/i2c.c
|
|
+ *
|
|
+ * Jz4740 I2C routines.
|
|
+ *
|
|
+ * Copyright (C) 2005,2006 Ingenic Semiconductor Inc.
|
|
+ * Author: <lhhuang@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can distribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License (Version 2) as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ * This program is distributed in the hope it will be useful, but WITHOUT
|
|
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
+ * for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License along
|
|
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
|
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
|
|
+ *
|
|
+ */
|
|
+#include <linux/module.h>
|
|
+#include <linux/types.h>
|
|
+#include <linux/delay.h>
|
|
+#include <asm/uaccess.h>
|
|
+#include <asm/addrspace.h>
|
|
+
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+/* I2C protocol */
|
|
+#define I2C_READ 1
|
|
+#define I2C_WRITE 0
|
|
+
|
|
+#define TIMEOUT 1000
|
|
+
|
|
+/*
|
|
+ * I2C bus protocol basic routines
|
|
+ */
|
|
+static int i2c_put_data(unsigned char data)
|
|
+{
|
|
+ unsigned int timeout = TIMEOUT*10;
|
|
+
|
|
+ __i2c_write(data);
|
|
+ __i2c_set_drf();
|
|
+ while (__i2c_check_drf() != 0);
|
|
+ while (!__i2c_transmit_ended());
|
|
+ while (!__i2c_received_ack() && timeout)
|
|
+ timeout--;
|
|
+
|
|
+ if (timeout)
|
|
+ return 0;
|
|
+ else
|
|
+ return -ETIMEDOUT;
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_JZ_TPANEL_ATA2508
|
|
+static int i2c_put_data_nack(unsigned char data)
|
|
+{
|
|
+ unsigned int timeout = TIMEOUT*10;
|
|
+
|
|
+ __i2c_write(data);
|
|
+ __i2c_set_drf();
|
|
+ while (__i2c_check_drf() != 0);
|
|
+ while (!__i2c_transmit_ended());
|
|
+ while (timeout--);
|
|
+ return 0;
|
|
+}
|
|
+#endif
|
|
+
|
|
+static int i2c_get_data(unsigned char *data, int ack)
|
|
+{
|
|
+ int timeout = TIMEOUT*10;
|
|
+
|
|
+ if (!ack)
|
|
+ __i2c_send_nack();
|
|
+ else
|
|
+ __i2c_send_ack();
|
|
+
|
|
+ while (__i2c_check_drf() == 0 && timeout)
|
|
+ timeout--;
|
|
+
|
|
+ if (timeout) {
|
|
+ if (!ack)
|
|
+ __i2c_send_stop();
|
|
+ *data = __i2c_read();
|
|
+ __i2c_clear_drf();
|
|
+ return 0;
|
|
+ } else
|
|
+ return -ETIMEDOUT;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * I2C interface
|
|
+ */
|
|
+void i2c_open(void)
|
|
+{
|
|
+ __i2c_set_clk(jz_clocks.extalclk, 10000); /* default 10 KHz */
|
|
+ __i2c_enable();
|
|
+}
|
|
+
|
|
+void i2c_close(void)
|
|
+{
|
|
+ udelay(300); /* wait for STOP goes over. */
|
|
+ __i2c_disable();
|
|
+}
|
|
+
|
|
+void i2c_setclk(unsigned int i2cclk)
|
|
+{
|
|
+ __i2c_set_clk(jz_clocks.extalclk, i2cclk);
|
|
+}
|
|
+
|
|
+int i2c_lseek(unsigned char device, unsigned char offset)
|
|
+{
|
|
+ __i2c_send_nack(); /* Master does not send ACK, slave sends it */
|
|
+ __i2c_send_start();
|
|
+ if (i2c_put_data( (device << 1) | I2C_WRITE ) < 0)
|
|
+ goto device_err;
|
|
+ if (i2c_put_data(offset) < 0)
|
|
+ goto address_err;
|
|
+ return 0;
|
|
+ device_err:
|
|
+ printk(KERN_DEBUG "No I2C device (0x%02x) installed.\n", device);
|
|
+ __i2c_send_stop();
|
|
+ return -ENODEV;
|
|
+ address_err:
|
|
+ printk(KERN_DEBUG "No I2C device (0x%02x) response.\n", device);
|
|
+ __i2c_send_stop();
|
|
+ return -EREMOTEIO;
|
|
+}
|
|
+
|
|
+int i2c_read(unsigned char device, unsigned char *buf,
|
|
+ unsigned char address, int count)
|
|
+{
|
|
+ int cnt = count;
|
|
+ int timeout = 5;
|
|
+
|
|
+L_try_again:
|
|
+
|
|
+ if (timeout < 0)
|
|
+ goto L_timeout;
|
|
+
|
|
+ __i2c_send_nack(); /* Master does not send ACK, slave sends it */
|
|
+ __i2c_send_start();
|
|
+ if (i2c_put_data( (device << 1) | I2C_WRITE ) < 0)
|
|
+ goto device_werr;
|
|
+ if (i2c_put_data(address) < 0)
|
|
+ goto address_err;
|
|
+
|
|
+ __i2c_send_start();
|
|
+ if (i2c_put_data( (device << 1) | I2C_READ ) < 0)
|
|
+ goto device_rerr;
|
|
+ __i2c_send_ack(); /* Master sends ACK for continue reading */
|
|
+ while (cnt) {
|
|
+ if (cnt == 1) {
|
|
+ if (i2c_get_data(buf, 0) < 0)
|
|
+ break;
|
|
+ } else {
|
|
+ if (i2c_get_data(buf, 1) < 0)
|
|
+ break;
|
|
+ }
|
|
+ cnt--;
|
|
+ buf++;
|
|
+ }
|
|
+
|
|
+ __i2c_send_stop();
|
|
+ return count - cnt;
|
|
+ device_rerr:
|
|
+ device_werr:
|
|
+ address_err:
|
|
+ timeout --;
|
|
+ __i2c_send_stop();
|
|
+ goto L_try_again;
|
|
+
|
|
+L_timeout:
|
|
+ __i2c_send_stop();
|
|
+ printk("Read I2C device 0x%2x failed.\n", device);
|
|
+ return -ENODEV;
|
|
+}
|
|
+
|
|
+int i2c_write(unsigned char device, unsigned char *buf,
|
|
+ unsigned char address, int count)
|
|
+{
|
|
+ int cnt = count;
|
|
+ int cnt_in_pg;
|
|
+ int timeout = 5;
|
|
+ unsigned char *tmpbuf;
|
|
+ unsigned char tmpaddr;
|
|
+
|
|
+ __i2c_send_nack(); /* Master does not send ACK, slave sends it */
|
|
+
|
|
+ W_try_again:
|
|
+ if (timeout < 0)
|
|
+ goto W_timeout;
|
|
+
|
|
+ cnt = count;
|
|
+ tmpbuf = (unsigned char *)buf;
|
|
+ tmpaddr = address;
|
|
+
|
|
+ start_write_page:
|
|
+ cnt_in_pg = 0;
|
|
+ __i2c_send_start();
|
|
+ if (i2c_put_data( (device << 1) | I2C_WRITE ) < 0)
|
|
+ goto device_err;
|
|
+#ifdef CONFIG_JZ_TPANEL_ATA2508
|
|
+ if (address == 0xff) {
|
|
+ if (i2c_put_data_nack(tmpaddr) < 0)
|
|
+ goto address_err;
|
|
+ while (cnt) {
|
|
+ if (++cnt_in_pg > 8) {
|
|
+ __i2c_send_stop();
|
|
+ mdelay(1);
|
|
+ tmpaddr += 8;
|
|
+ goto start_write_page;
|
|
+ }
|
|
+ if (i2c_put_data_nack(*tmpbuf) < 0)
|
|
+ break;
|
|
+ cnt--;
|
|
+ tmpbuf++;
|
|
+ }
|
|
+ }
|
|
+ else {
|
|
+
|
|
+ if (i2c_put_data(tmpaddr) < 0)
|
|
+ goto address_err;
|
|
+ while (cnt) {
|
|
+ if (++cnt_in_pg > 8) {
|
|
+ __i2c_send_stop();
|
|
+ mdelay(1);
|
|
+ tmpaddr += 8;
|
|
+ goto start_write_page;
|
|
+ }
|
|
+ if (i2c_put_data(*tmpbuf) < 0)
|
|
+ break;
|
|
+ cnt--;
|
|
+ tmpbuf++;
|
|
+ }
|
|
+ }
|
|
+#else
|
|
+ if (i2c_put_data(tmpaddr) < 0)
|
|
+ goto address_err;
|
|
+ while (cnt) {
|
|
+ if (++cnt_in_pg > 8) {
|
|
+ __i2c_send_stop();
|
|
+ mdelay(1);
|
|
+ tmpaddr += 8;
|
|
+ goto start_write_page;
|
|
+ }
|
|
+ if (i2c_put_data(*tmpbuf) < 0)
|
|
+ break;
|
|
+ cnt--;
|
|
+ tmpbuf++;
|
|
+ }
|
|
+#endif
|
|
+ __i2c_send_stop();
|
|
+ return count - cnt;
|
|
+ device_err:
|
|
+ address_err:
|
|
+ timeout--;
|
|
+ __i2c_send_stop();
|
|
+ goto W_try_again;
|
|
+
|
|
+ W_timeout:
|
|
+ printk(KERN_DEBUG "Write I2C device 0x%2x failed.\n", device);
|
|
+ __i2c_send_stop();
|
|
+ return -ENODEV;
|
|
+}
|
|
+
|
|
+EXPORT_SYMBOL(i2c_open);
|
|
+EXPORT_SYMBOL(i2c_close);
|
|
+EXPORT_SYMBOL(i2c_setclk);
|
|
+EXPORT_SYMBOL(i2c_read);
|
|
+EXPORT_SYMBOL(i2c_write);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4740/irq.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4740/irq.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,265 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4740/irq.c
|
|
+ *
|
|
+ * JZ4740 interrupt routines.
|
|
+ *
|
|
+ * Copyright (c) 2006-2007 Ingenic Semiconductor Inc.
|
|
+ * Author: <lhhuang@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License as published by the
|
|
+ * Free Software Foundation; either version 2 of the License, or (at your
|
|
+ * option) any later version.
|
|
+ */
|
|
+#include <linux/errno.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/irq.h>
|
|
+#include <linux/kernel_stat.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/signal.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/types.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/timex.h>
|
|
+#include <linux/slab.h>
|
|
+#include <linux/random.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/bitops.h>
|
|
+
|
|
+#include <asm/bootinfo.h>
|
|
+#include <asm/io.h>
|
|
+#include <asm/mipsregs.h>
|
|
+#include <asm/system.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+/*
|
|
+ * INTC irq type
|
|
+ */
|
|
+
|
|
+static void enable_intc_irq(unsigned int irq)
|
|
+{
|
|
+ __intc_unmask_irq(irq);
|
|
+}
|
|
+
|
|
+static void disable_intc_irq(unsigned int irq)
|
|
+{
|
|
+ __intc_mask_irq(irq);
|
|
+}
|
|
+
|
|
+static void mask_and_ack_intc_irq(unsigned int irq)
|
|
+{
|
|
+ __intc_mask_irq(irq);
|
|
+ __intc_ack_irq(irq);
|
|
+}
|
|
+
|
|
+static void end_intc_irq(unsigned int irq)
|
|
+{
|
|
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
|
|
+ enable_intc_irq(irq);
|
|
+ }
|
|
+}
|
|
+
|
|
+static unsigned int startup_intc_irq(unsigned int irq)
|
|
+{
|
|
+ enable_intc_irq(irq);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void shutdown_intc_irq(unsigned int irq)
|
|
+{
|
|
+ disable_intc_irq(irq);
|
|
+}
|
|
+
|
|
+static struct irq_chip intc_irq_type = {
|
|
+ .typename = "INTC",
|
|
+ .startup = startup_intc_irq,
|
|
+ .shutdown = shutdown_intc_irq,
|
|
+ .enable = enable_intc_irq,
|
|
+ .disable = disable_intc_irq,
|
|
+ .ack = mask_and_ack_intc_irq,
|
|
+ .end = end_intc_irq,
|
|
+};
|
|
+
|
|
+/*
|
|
+ * GPIO irq type
|
|
+ */
|
|
+
|
|
+static void enable_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ unsigned int intc_irq;
|
|
+
|
|
+ if (irq < (IRQ_GPIO_0 + 32)) {
|
|
+ intc_irq = IRQ_GPIO0;
|
|
+ }
|
|
+ else if (irq < (IRQ_GPIO_0 + 64)) {
|
|
+ intc_irq = IRQ_GPIO1;
|
|
+ }
|
|
+ else if (irq < (IRQ_GPIO_0 + 96)) {
|
|
+ intc_irq = IRQ_GPIO2;
|
|
+ }
|
|
+ else {
|
|
+ intc_irq = IRQ_GPIO3;
|
|
+ }
|
|
+
|
|
+ enable_intc_irq(intc_irq);
|
|
+ __gpio_unmask_irq(irq - IRQ_GPIO_0);
|
|
+}
|
|
+
|
|
+static void disable_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ __gpio_mask_irq(irq - IRQ_GPIO_0);
|
|
+}
|
|
+
|
|
+static void mask_and_ack_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ __gpio_mask_irq(irq - IRQ_GPIO_0);
|
|
+ __gpio_ack_irq(irq - IRQ_GPIO_0);
|
|
+}
|
|
+
|
|
+static void end_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
|
|
+ enable_gpio_irq(irq);
|
|
+ }
|
|
+}
|
|
+
|
|
+static unsigned int startup_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ enable_gpio_irq(irq);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void shutdown_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ disable_gpio_irq(irq);
|
|
+}
|
|
+
|
|
+static struct irq_chip gpio_irq_type = {
|
|
+ .typename = "GPIO",
|
|
+ .startup = startup_gpio_irq,
|
|
+ .shutdown = shutdown_gpio_irq,
|
|
+ .enable = enable_gpio_irq,
|
|
+ .disable = disable_gpio_irq,
|
|
+ .ack = mask_and_ack_gpio_irq,
|
|
+ .end = end_gpio_irq,
|
|
+};
|
|
+
|
|
+/*
|
|
+ * DMA irq type
|
|
+ */
|
|
+
|
|
+static void enable_dma_irq(unsigned int irq)
|
|
+{
|
|
+ __intc_unmask_irq(IRQ_DMAC);
|
|
+ __dmac_channel_enable_irq(irq - IRQ_DMA_0);
|
|
+}
|
|
+
|
|
+static void disable_dma_irq(unsigned int irq)
|
|
+{
|
|
+ __dmac_channel_disable_irq(irq - IRQ_DMA_0);
|
|
+}
|
|
+
|
|
+static void mask_and_ack_dma_irq(unsigned int irq)
|
|
+{
|
|
+ __intc_ack_irq(IRQ_DMAC);
|
|
+ __dmac_channel_disable_irq(irq - IRQ_DMA_0);
|
|
+}
|
|
+
|
|
+static void end_dma_irq(unsigned int irq)
|
|
+{
|
|
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
|
|
+ enable_dma_irq(irq);
|
|
+ }
|
|
+}
|
|
+
|
|
+static unsigned int startup_dma_irq(unsigned int irq)
|
|
+{
|
|
+ enable_dma_irq(irq);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void shutdown_dma_irq(unsigned int irq)
|
|
+{
|
|
+ disable_dma_irq(irq);
|
|
+}
|
|
+
|
|
+static struct irq_chip dma_irq_type = {
|
|
+ .typename = "DMA",
|
|
+ .startup = startup_dma_irq,
|
|
+ .shutdown = shutdown_dma_irq,
|
|
+ .enable = enable_dma_irq,
|
|
+ .disable = disable_dma_irq,
|
|
+ .ack = mask_and_ack_dma_irq,
|
|
+ .end = end_dma_irq,
|
|
+};
|
|
+
|
|
+//----------------------------------------------------------------------
|
|
+
|
|
+void __init arch_init_irq(void)
|
|
+{
|
|
+ int i;
|
|
+
|
|
+ clear_c0_status(0xff04); /* clear ERL */
|
|
+ set_c0_status(0x0400); /* set IP2 */
|
|
+
|
|
+ /* Set up INTC irq
|
|
+ */
|
|
+ for (i = 0; i < 32; i++) {
|
|
+ disable_intc_irq(i);
|
|
+ irq_desc[i].chip = &intc_irq_type;
|
|
+ }
|
|
+
|
|
+ /* Set up DMAC irq
|
|
+ */
|
|
+ for (i = 0; i < NUM_DMA; i++) {
|
|
+ disable_dma_irq(IRQ_DMA_0 + i);
|
|
+ irq_desc[IRQ_DMA_0 + i].chip = &dma_irq_type;
|
|
+ }
|
|
+
|
|
+ /* Set up GPIO irq
|
|
+ */
|
|
+ for (i = 0; i < NUM_GPIO; i++) {
|
|
+ disable_gpio_irq(IRQ_GPIO_0 + i);
|
|
+ irq_desc[IRQ_GPIO_0 + i].chip = &gpio_irq_type;
|
|
+ }
|
|
+}
|
|
+
|
|
+static int plat_real_irq(int irq)
|
|
+{
|
|
+ switch (irq) {
|
|
+ case IRQ_GPIO0:
|
|
+ irq = __gpio_group_irq(0) + IRQ_GPIO_0;
|
|
+ break;
|
|
+ case IRQ_GPIO1:
|
|
+ irq = __gpio_group_irq(1) + IRQ_GPIO_0 + 32;
|
|
+ break;
|
|
+ case IRQ_GPIO2:
|
|
+ irq = __gpio_group_irq(2) + IRQ_GPIO_0 + 64;
|
|
+ break;
|
|
+ case IRQ_GPIO3:
|
|
+ irq = __gpio_group_irq(3) + IRQ_GPIO_0 + 96;
|
|
+ break;
|
|
+ case IRQ_DMAC:
|
|
+ irq = __dmac_get_irq() + IRQ_DMA_0;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ return irq;
|
|
+}
|
|
+
|
|
+asmlinkage void plat_irq_dispatch(void)
|
|
+{
|
|
+ int irq = 0;
|
|
+ static unsigned long intc_ipr = 0;
|
|
+
|
|
+ intc_ipr |= REG_INTC_IPR;
|
|
+
|
|
+ if (!intc_ipr) return;
|
|
+
|
|
+ irq = ffs(intc_ipr) - 1;
|
|
+ intc_ipr &= ~(1<<irq);
|
|
+
|
|
+ irq = plat_real_irq(irq);
|
|
+ do_IRQ(irq);
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/jz4740/platform.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4740/platform.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,169 @@
|
|
+/*
|
|
+ * Platform device support for Jz4740 SoC.
|
|
+ *
|
|
+ * Copyright 2007, <yliu@ingenic.cn>
|
|
+ *
|
|
+ * This file is licensed under the terms of the GNU General Public
|
|
+ * License version 2. This program is licensed "as is" without any
|
|
+ * warranty of any kind, whether express or implied.
|
|
+ */
|
|
+
|
|
+#include <linux/device.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/resource.h>
|
|
+
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+/* OHCI (USB full speed host controller) */
|
|
+static struct resource jz_usb_ohci_resources[] = {
|
|
+ [0] = {
|
|
+ .start = CPHYSADDR(UHC_BASE), // phys addr for ioremap
|
|
+ .end = CPHYSADDR(UHC_BASE) + 0x10000 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = IRQ_UHC,
|
|
+ .end = IRQ_UHC,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+/* The dmamask must be set for OHCI to work */
|
|
+static u64 ohci_dmamask = ~(u32)0;
|
|
+
|
|
+static struct platform_device jz_usb_ohci_device = {
|
|
+ .name = "jz-ohci",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &ohci_dmamask,
|
|
+ .coherent_dma_mask = 0xffffffff,
|
|
+ },
|
|
+ .num_resources = ARRAY_SIZE(jz_usb_ohci_resources),
|
|
+ .resource = jz_usb_ohci_resources,
|
|
+};
|
|
+
|
|
+/*** LCD controller ***/
|
|
+static struct resource jz_lcd_resources[] = {
|
|
+ [0] = {
|
|
+ .start = CPHYSADDR(LCD_BASE),
|
|
+ .end = CPHYSADDR(LCD_BASE) + 0x10000 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = IRQ_LCD,
|
|
+ .end = IRQ_LCD,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ }
|
|
+};
|
|
+
|
|
+static u64 jz_lcd_dmamask = ~(u32)0;
|
|
+
|
|
+static struct platform_device jz_lcd_device = {
|
|
+ .name = "jz-lcd",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &jz_lcd_dmamask,
|
|
+ .coherent_dma_mask = 0xffffffff,
|
|
+ },
|
|
+ .num_resources = ARRAY_SIZE(jz_lcd_resources),
|
|
+ .resource = jz_lcd_resources,
|
|
+};
|
|
+
|
|
+/* UDC (USB gadget controller) */
|
|
+static struct resource jz_usb_gdt_resources[] = {
|
|
+ [0] = {
|
|
+ .start = CPHYSADDR(UDC_BASE),
|
|
+ .end = CPHYSADDR(UDC_BASE) + 0x10000 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = IRQ_UDC,
|
|
+ .end = IRQ_UDC,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static u64 udc_dmamask = ~(u32)0;
|
|
+
|
|
+static struct platform_device jz_usb_gdt_device = {
|
|
+ .name = "jz-udc",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &udc_dmamask,
|
|
+ .coherent_dma_mask = 0xffffffff,
|
|
+ },
|
|
+ .num_resources = ARRAY_SIZE(jz_usb_gdt_resources),
|
|
+ .resource = jz_usb_gdt_resources,
|
|
+};
|
|
+
|
|
+/** MMC/SD controller **/
|
|
+static struct resource jz_mmc_resources[] = {
|
|
+ [0] = {
|
|
+ .start = CPHYSADDR(MSC_BASE),
|
|
+ .end = CPHYSADDR(MSC_BASE) + 0x10000 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = IRQ_MSC,
|
|
+ .end = IRQ_MSC,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ }
|
|
+};
|
|
+
|
|
+static u64 jz_mmc_dmamask = ~(u32)0;
|
|
+
|
|
+static struct platform_device jz_mmc_device = {
|
|
+ .name = "jz-mmc",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &jz_mmc_dmamask,
|
|
+ .coherent_dma_mask = 0xffffffff,
|
|
+ },
|
|
+ .num_resources = ARRAY_SIZE(jz_mmc_resources),
|
|
+ .resource = jz_mmc_resources,
|
|
+};
|
|
+
|
|
+/** I2C controller **/
|
|
+static struct resource jz_i2c_resources[] = {
|
|
+ [0] = {
|
|
+ .start = CPHYSADDR(I2C_BASE),
|
|
+ .end = CPHYSADDR(I2C_BASE) + 0x10000 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = IRQ_I2C,
|
|
+ .end = IRQ_I2C,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ }
|
|
+};
|
|
+
|
|
+static u64 jz_i2c_dmamask = ~(u32)0;
|
|
+
|
|
+static struct platform_device jz_i2c_device = {
|
|
+ .name = "jz_i2c",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &jz_i2c_dmamask,
|
|
+ .coherent_dma_mask = 0xffffffff,
|
|
+ },
|
|
+ .num_resources = ARRAY_SIZE(jz_i2c_resources),
|
|
+ .resource = jz_i2c_resources,
|
|
+};
|
|
+
|
|
+/* All */
|
|
+static struct platform_device *jz_platform_devices[] __initdata = {
|
|
+ &jz_usb_ohci_device,
|
|
+ &jz_lcd_device,
|
|
+ &jz_usb_gdt_device,
|
|
+ &jz_mmc_device,
|
|
+ &jz_i2c_device,
|
|
+};
|
|
+
|
|
+static int __init jz_platform_init(void)
|
|
+{
|
|
+ return platform_add_devices(jz_platform_devices, ARRAY_SIZE(jz_platform_devices));
|
|
+}
|
|
+
|
|
+arch_initcall(jz_platform_init);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4740/pm.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4740/pm.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,462 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4740/common/pm.c
|
|
+ *
|
|
+ * JZ4740 Power Management Routines
|
|
+ *
|
|
+ * Copyright (C) 2006 Ingenic Semiconductor Inc.
|
|
+ * Author: <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can distribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License (Version 2) as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ * This program is distributed in the hope it will be useful, but WITHOUT
|
|
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
+ * for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License along
|
|
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
|
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/pm.h>
|
|
+#include <linux/pm_legacy.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/proc_fs.h>
|
|
+#include <linux/sysctl.h>
|
|
+
|
|
+#include <asm/cacheops.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+#undef DEBUG
|
|
+//#define DEBUG
|
|
+#ifdef DEBUG
|
|
+#define dprintk(x...) printk(x)
|
|
+#else
|
|
+#define dprintk(x...)
|
|
+#endif
|
|
+
|
|
+#define GPIO_WAKEUP 125 /* set SW7(GPIO 125) as WAKEUP key */
|
|
+
|
|
+/*
|
|
+ * __gpio_as_sleep set all pins to pull-disable, and set all pins as input
|
|
+ * except sdram, nand flash pins and the pins which can be used as CS1_N
|
|
+ * to CS4_N for chip select.
|
|
+ */
|
|
+#define __gpio_as_sleep() \
|
|
+do { \
|
|
+ REG_GPIO_PXFUNC(1) = ~0x9ff9ffff; \
|
|
+ REG_GPIO_PXSELC(1) = ~0x9ff9ffff; \
|
|
+ REG_GPIO_PXDIRC(1) = ~0x9ff9ffff; \
|
|
+ REG_GPIO_PXPES(1) = 0xffffffff; \
|
|
+ REG_GPIO_PXFUNC(2) = ~0x37000000; \
|
|
+ REG_GPIO_PXSELC(2) = ~0x37000000; \
|
|
+ REG_GPIO_PXDIRC(2) = ~0x37000000; \
|
|
+ REG_GPIO_PXPES(2) = 0xffffffff; \
|
|
+ REG_GPIO_PXFUNC(3) = 0xffffffff; \
|
|
+ REG_GPIO_PXSELC(3) = 0xffffffff; \
|
|
+ REG_GPIO_PXDIRC(3) = 0xffffffff; \
|
|
+ REG_GPIO_PXPES(3) = 0xffffffff; \
|
|
+} while (0)
|
|
+
|
|
+static int jz_pm_do_hibernate(void)
|
|
+{
|
|
+ printk("Put CPU into hibernate mode.\n");
|
|
+
|
|
+ /* Mask all interrupts */
|
|
+ REG_INTC_IMSR = 0xffffffff;
|
|
+
|
|
+ /*
|
|
+ * RTC Wakeup or 1Hz interrupt can be enabled or disabled
|
|
+ * through RTC driver's ioctl (linux/driver/char/rtc_jz.c).
|
|
+ */
|
|
+
|
|
+ /* Set minimum wakeup_n pin low-level assertion time for wakeup: 100ms */
|
|
+ while (!(REG_RTC_RCR & RTC_RCR_WRDY));
|
|
+ REG_RTC_HWFCR = (100 << RTC_HWFCR_BIT);
|
|
+
|
|
+ /* Set reset pin low-level assertion time after wakeup: must > 60ms */
|
|
+ while (!(REG_RTC_RCR & RTC_RCR_WRDY));
|
|
+ REG_RTC_HRCR = (60 << RTC_HRCR_BIT); /* 60 ms */
|
|
+
|
|
+ /* Scratch pad register to be reserved */
|
|
+ while (!(REG_RTC_RCR & RTC_RCR_WRDY));
|
|
+ REG_RTC_HSPR = 0x12345678;
|
|
+
|
|
+ /* clear wakeup status register */
|
|
+ while (!(REG_RTC_RCR & RTC_RCR_WRDY));
|
|
+ REG_RTC_HWRSR = 0x0;
|
|
+
|
|
+ /* Put CPU to power down mode */
|
|
+ while (!(REG_RTC_RCR & RTC_RCR_WRDY));
|
|
+ REG_RTC_HCR = RTC_HCR_PD;
|
|
+
|
|
+ while (!(REG_RTC_RCR & RTC_RCR_WRDY));
|
|
+ while(1);
|
|
+
|
|
+ /* We can't get here */
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/* NOTES:
|
|
+ * 1: Pins that are floated (NC) should be set as input and pull-enable.
|
|
+ * 2: Pins that are pull-up or pull-down by outside should be set as input
|
|
+ * and pull-disable.
|
|
+ * 3: Pins that are connected to a chip except sdram and nand flash
|
|
+ * should be set as input and pull-disable, too.
|
|
+ */
|
|
+static void jz_board_do_sleep(unsigned long *ptr)
|
|
+{
|
|
+ unsigned char i;
|
|
+
|
|
+ /* Print messages of GPIO registers for debug */
|
|
+ for(i=0;i<4;i++) {
|
|
+ dprintk("run dat:%x pin:%x fun:%x sel:%x dir:%x pull:%x msk:%x trg:%x\n", \
|
|
+ REG_GPIO_PXDAT(i),REG_GPIO_PXPIN(i),REG_GPIO_PXFUN(i),REG_GPIO_PXSEL(i), \
|
|
+ REG_GPIO_PXDIR(i),REG_GPIO_PXPE(i),REG_GPIO_PXIM(i),REG_GPIO_PXTRG(i));
|
|
+ }
|
|
+
|
|
+ /* Save GPIO registers */
|
|
+ for(i = 1; i < 4; i++) {
|
|
+ *ptr++ = REG_GPIO_PXFUN(i);
|
|
+ *ptr++ = REG_GPIO_PXSEL(i);
|
|
+ *ptr++ = REG_GPIO_PXDIR(i);
|
|
+ *ptr++ = REG_GPIO_PXPE(i);
|
|
+ *ptr++ = REG_GPIO_PXIM(i);
|
|
+ *ptr++ = REG_GPIO_PXDAT(i);
|
|
+ *ptr++ = REG_GPIO_PXTRG(i);
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * Set all pins to pull-disable, and set all pins as input except
|
|
+ * sdram, nand flash pins and the pins which can be used as CS1_N
|
|
+ * to CS4_N for chip select.
|
|
+ */
|
|
+ __gpio_as_sleep();
|
|
+
|
|
+ /*
|
|
+ * Set proper status for GPB25 to GPB28 which can be used as CS1_N to CS4_N.
|
|
+ * Keep the pins' function used for chip select(CS) here according to your
|
|
+ * system to avoid chip select crashing with sdram when resuming from sleep mode.
|
|
+ */
|
|
+
|
|
+#if defined(CONFIG_JZ4740_PAVO)
|
|
+ /* GPB25/CS1_N is used as chip select for nand flash, shouldn't be change. */
|
|
+
|
|
+ /* GPB26/CS2_N is connected to nand flash, needn't be changed. */
|
|
+
|
|
+ /* GPB27/CS3_N is used as EXT_INT for CS8900 on debug board, it should be set as input.*/
|
|
+ __gpio_as_input(32+27);
|
|
+
|
|
+ /* GPB28/CS4_N is used as cs8900's chip select, shouldn't be changed. */
|
|
+#endif
|
|
+
|
|
+ /*
|
|
+ * Enable pull for NC pins here according to your system
|
|
+ */
|
|
+
|
|
+#if defined(CONFIG_JZ4740_PAVO)
|
|
+ /* GPB30-27 <-> J1: WE_N RD_N CS4_N EXT_INT */
|
|
+ for(i=27;i<31;i++) {
|
|
+ __gpio_enable_pull(32+i);
|
|
+ }
|
|
+
|
|
+ /* GPC27<-> WAIT_N */
|
|
+ __gpio_enable_pull(32*2+27);
|
|
+
|
|
+ /* GPD16<->SD_WP; GPD13-10<->MSC_D0-3; GPD9<->MSC_CMD; GPD8<->MSC_CLK */
|
|
+ __gpio_enable_pull(32*3+16);
|
|
+ for(i=8;i<14;i++) {
|
|
+ __gpio_enable_pull(32*3+i);
|
|
+ }
|
|
+#endif
|
|
+
|
|
+ /*
|
|
+ * If you must set some GPIOs as output to high level or low level,
|
|
+ * you can set them here, using:
|
|
+ * __gpio_as_output(n);
|
|
+ * __gpio_set_pin(n); or __gpio_clear_pin(n);
|
|
+ */
|
|
+
|
|
+#if defined(CONFIG_JZ4740_PAVO)
|
|
+ /* GPD16 which is used as AMPEN_N should be set to high to disable audio amplifier */
|
|
+ __gpio_set_pin(32*3+4);
|
|
+#endif
|
|
+
|
|
+#ifdef DEBUG
|
|
+ /* Keep uart0 function for printing debug message */
|
|
+ __gpio_as_uart0();
|
|
+
|
|
+ /* Print messages of GPIO registers for debug */
|
|
+ for(i=0;i<4;i++) {
|
|
+ dprintk("sleep dat:%x pin:%x fun:%x sel:%x dir:%x pull:%x msk:%x trg:%x\n", \
|
|
+ REG_GPIO_PXDAT(i),REG_GPIO_PXPIN(i),REG_GPIO_PXFUN(i),REG_GPIO_PXSEL(i), \
|
|
+ REG_GPIO_PXDIR(i),REG_GPIO_PXPE(i),REG_GPIO_PXIM(i),REG_GPIO_PXTRG(i));
|
|
+ }
|
|
+#endif
|
|
+}
|
|
+
|
|
+static void jz_board_do_resume(unsigned long *ptr)
|
|
+{
|
|
+ unsigned char i;
|
|
+
|
|
+ /* Restore GPIO registers */
|
|
+ for(i = 1; i < 4; i++) {
|
|
+ REG_GPIO_PXFUNS(i) = *ptr;
|
|
+ REG_GPIO_PXFUNC(i) = ~(*ptr++);
|
|
+
|
|
+ REG_GPIO_PXSELS(i) = *ptr;
|
|
+ REG_GPIO_PXSELC(i) = ~(*ptr++);
|
|
+
|
|
+ REG_GPIO_PXDIRS(i) = *ptr;
|
|
+ REG_GPIO_PXDIRC(i) = ~(*ptr++);
|
|
+
|
|
+ REG_GPIO_PXPES(i) = *ptr;
|
|
+ REG_GPIO_PXPEC(i) = ~(*ptr++);
|
|
+
|
|
+ REG_GPIO_PXIMS(i)=*ptr;
|
|
+ REG_GPIO_PXIMC(i)=~(*ptr++);
|
|
+
|
|
+ REG_GPIO_PXDATS(i)=*ptr;
|
|
+ REG_GPIO_PXDATC(i)=~(*ptr++);
|
|
+
|
|
+ REG_GPIO_PXTRGS(i)=*ptr;
|
|
+ REG_GPIO_PXTRGC(i)=~(*ptr++);
|
|
+ }
|
|
+
|
|
+ /* Print messages of GPIO registers for debug */
|
|
+ for(i=0;i<4;i++) {
|
|
+ dprintk("resume dat:%x pin:%x fun:%x sel:%x dir:%x pull:%x msk:%x trg:%x\n", \
|
|
+ REG_GPIO_PXDAT(i),REG_GPIO_PXPIN(i),REG_GPIO_PXFUN(i),REG_GPIO_PXSEL(i), \
|
|
+ REG_GPIO_PXDIR(i),REG_GPIO_PXPE(i),REG_GPIO_PXIM(i),REG_GPIO_PXTRG(i));
|
|
+ }
|
|
+}
|
|
+
|
|
+
|
|
+
|
|
+static int jz_pm_do_sleep(void)
|
|
+{
|
|
+ unsigned long delta;
|
|
+ unsigned long nfcsr = REG_EMC_NFCSR;
|
|
+ unsigned long scr = REG_CPM_SCR;
|
|
+ unsigned long imr = REG_INTC_IMR;
|
|
+ unsigned long sadc = REG_SADC_ENA;
|
|
+ unsigned long sleep_gpio_save[7*3];
|
|
+
|
|
+ printk("Put CPU into sleep mode.\n");
|
|
+
|
|
+ /* Preserve current time */
|
|
+ delta = xtime.tv_sec - REG_RTC_RSR;
|
|
+
|
|
+ /* Disable nand flash */
|
|
+ REG_EMC_NFCSR = ~0xff;
|
|
+
|
|
+ /* stop sadc */
|
|
+ REG_SADC_ENA &= ~0x7;
|
|
+ while((REG_SADC_ENA & 0x7) != 0);
|
|
+ udelay(100);
|
|
+
|
|
+ /*stop udc and usb*/
|
|
+ REG_CPM_SCR &= ~( 1<<6 | 1<<7);
|
|
+ REG_CPM_SCR |= 0<<6 | 1<<7;
|
|
+
|
|
+ /* Sleep on-board modules */
|
|
+ jz_board_do_sleep(sleep_gpio_save);
|
|
+
|
|
+ /* Mask all interrupts */
|
|
+ REG_INTC_IMSR = 0xffffffff;
|
|
+
|
|
+ /* Just allow following interrupts to wakeup the system.
|
|
+ * Note: modify this according to your system.
|
|
+ */
|
|
+
|
|
+ /* enable RTC alarm */
|
|
+ __intc_unmask_irq(IRQ_RTC);
|
|
+#if 0
|
|
+ /* make system wake up after n seconds by RTC alarm */
|
|
+ unsigned int v, n;
|
|
+ n = 10;
|
|
+ while (!__rtc_write_ready());
|
|
+ __rtc_enable_alarm();
|
|
+ while (!__rtc_write_ready());
|
|
+ __rtc_enable_alarm_irq();
|
|
+ while (!__rtc_write_ready());
|
|
+ v = __rtc_get_second();
|
|
+ while (!__rtc_write_ready());
|
|
+ __rtc_set_alarm_second(v+n);
|
|
+#endif
|
|
+
|
|
+ /* WAKEUP key */
|
|
+ __gpio_as_irq_rise_edge(GPIO_WAKEUP);
|
|
+ __gpio_unmask_irq(GPIO_WAKEUP);
|
|
+ __intc_unmask_irq(IRQ_GPIO3); /* IRQ_GPIOn depends on GPIO_WAKEUP */
|
|
+
|
|
+ /* Enter SLEEP mode */
|
|
+ REG_CPM_LCR &= ~CPM_LCR_LPM_MASK;
|
|
+ REG_CPM_LCR |= CPM_LCR_LPM_SLEEP;
|
|
+ __asm__(".set\tmips3\n\t"
|
|
+ "wait\n\t"
|
|
+ ".set\tmips0");
|
|
+
|
|
+ /* Restore to IDLE mode */
|
|
+ REG_CPM_LCR &= ~CPM_LCR_LPM_MASK;
|
|
+ REG_CPM_LCR |= CPM_LCR_LPM_IDLE;
|
|
+
|
|
+ /* Restore nand flash control register */
|
|
+ REG_EMC_NFCSR = nfcsr;
|
|
+
|
|
+ /* Restore interrupts */
|
|
+ REG_INTC_IMSR = imr;
|
|
+ REG_INTC_IMCR = ~imr;
|
|
+
|
|
+ /* Restore sadc */
|
|
+ REG_SADC_ENA = sadc;
|
|
+
|
|
+ /* Resume on-board modules */
|
|
+ jz_board_do_resume(sleep_gpio_save);
|
|
+
|
|
+ /* Restore sleep control register */
|
|
+ REG_CPM_SCR = scr;
|
|
+
|
|
+ /* Restore current time */
|
|
+ xtime.tv_sec = REG_RTC_RSR + delta;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/* Put CPU to HIBERNATE mode */
|
|
+int jz_pm_hibernate(void)
|
|
+{
|
|
+ return jz_pm_do_hibernate();
|
|
+}
|
|
+
|
|
+#ifndef CONFIG_JZ_POWEROFF
|
|
+static irqreturn_t pm_irq_handler (int irq, void *dev_id)
|
|
+{
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+#endif
|
|
+
|
|
+/* Put CPU to SLEEP mode */
|
|
+int jz_pm_sleep(void)
|
|
+{
|
|
+ int retval;
|
|
+
|
|
+#ifndef CONFIG_JZ_POWEROFF
|
|
+ if ((retval = request_irq (IRQ_GPIO_0 + GPIO_WAKEUP, pm_irq_handler, IRQF_DISABLED,
|
|
+ "PM", NULL))) {
|
|
+ printk ("PM could not get IRQ for GPIO_WAKEUP\n");
|
|
+ return retval;
|
|
+ }
|
|
+#endif
|
|
+
|
|
+ pm_send_all(PM_SUSPEND, (void *)3);
|
|
+ retval = jz_pm_do_sleep();
|
|
+ pm_send_all(PM_RESUME, (void *)0);
|
|
+
|
|
+#ifndef CONFIG_JZ_POWEROFF
|
|
+ free_irq (IRQ_GPIO_0 + GPIO_WAKEUP, NULL);
|
|
+#endif
|
|
+
|
|
+ return retval;
|
|
+}
|
|
+
|
|
+#if 0
|
|
+/* Deprecated ,was used by dpm */
|
|
+void jz_pm_idle(void)
|
|
+{
|
|
+ local_irq_disable();
|
|
+ if (!need_resched()) {
|
|
+ local_irq_enable();
|
|
+ cpu_wait();
|
|
+ }
|
|
+}
|
|
+#endif
|
|
+
|
|
+#ifdef CONFIG_SYSCTL
|
|
+
|
|
+/*
|
|
+ * Use a temporary sysctl number. Horrid, but will be cleaned up in 2.6
|
|
+ * when all the PM interfaces exist nicely.
|
|
+ */
|
|
+#define CTL_PM_SUSPEND 1
|
|
+#define CTL_PM_HIBERNATE 2
|
|
+
|
|
+/*----------------------------------------------------------------------------
|
|
+ * Power Management sleep sysctl proc interface
|
|
+ *
|
|
+ * A write to /proc/sys/pm/suspend invokes this function
|
|
+ * which initiates a sleep.
|
|
+ *--------------------------------------------------------------------------*/
|
|
+static int sysctl_jz_pm_sleep(struct ctl_table *ctl, int write, struct file * filp,
|
|
+ void __user *buffer, size_t *lenp, loff_t *ppos)
|
|
+{
|
|
+ return jz_pm_sleep();
|
|
+}
|
|
+
|
|
+/*----------------------------------------------------------------------------
|
|
+ * Power Management sleep sysctl proc interface
|
|
+ *
|
|
+ * A write to /proc/sys/pm/hibernate invokes this function
|
|
+ * which initiates a poweroff.
|
|
+ *--------------------------------------------------------------------------*/
|
|
+static int sysctl_jz_pm_hibernate(struct ctl_table *ctl, int write, struct file * filp,
|
|
+ void __user *buffer, size_t *lenp, loff_t *ppos)
|
|
+{
|
|
+ return jz_pm_hibernate();
|
|
+}
|
|
+
|
|
+static struct ctl_table pm_table[] =
|
|
+{
|
|
+ {
|
|
+ .ctl_name = CTL_UNNUMBERED,
|
|
+ .procname = "suspend",
|
|
+ .data = NULL,
|
|
+ .maxlen = 0,
|
|
+ .mode = 0600,
|
|
+ .proc_handler = &sysctl_jz_pm_sleep,
|
|
+ },
|
|
+ {
|
|
+ .ctl_name = CTL_UNNUMBERED,
|
|
+ .procname = "hibernate",
|
|
+ .data = NULL,
|
|
+ .maxlen = 0,
|
|
+ .mode = 0600,
|
|
+ .proc_handler = &sysctl_jz_pm_hibernate,
|
|
+ },
|
|
+ { .ctl_name = 0}
|
|
+};
|
|
+
|
|
+static struct ctl_table pm_dir_table[] =
|
|
+{
|
|
+ {
|
|
+ .ctl_name = CTL_UNNUMBERED,
|
|
+ .procname = "pm",
|
|
+ .mode = 0555,
|
|
+ .child = pm_table,
|
|
+ },
|
|
+ { .ctl_name = 0}
|
|
+};
|
|
+
|
|
+#endif /* CONFIG_SYSCTL */
|
|
+
|
|
+/*
|
|
+ * Initialize power interface
|
|
+ */
|
|
+static int __init jz_pm_init(void)
|
|
+{
|
|
+ printk("Power Management for JZ\n");
|
|
+
|
|
+#ifdef CONFIG_SYSCTL
|
|
+ register_sysctl_table(pm_dir_table);
|
|
+#endif
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+module_init(jz_pm_init);
|
|
+
|
|
--- linux-2.6.24.7.old/arch/mips/jz4740/proc.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4740/proc.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,887 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4740/proc.c
|
|
+ *
|
|
+ * /proc/jz/ procfs for jz4740 on-chip modules.
|
|
+ *
|
|
+ * Copyright (C) 2006 Ingenic Semiconductor Inc.
|
|
+ * Author: <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can distribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License (Version 2) as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ * This program is distributed in the hope it will be useful, but WITHOUT
|
|
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
+ * for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License along
|
|
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
|
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
|
|
+ *
|
|
+ */
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/irq.h>
|
|
+#include <linux/sysctl.h>
|
|
+#include <linux/proc_fs.h>
|
|
+#include <linux/page-flags.h>
|
|
+#include <asm/uaccess.h>
|
|
+#include <asm/pgtable.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+//#define DEBUG 1
|
|
+#undef DEBUG
|
|
+
|
|
+/* Define this to reserve total 4MB contineous physical memory for IPU.
|
|
+ * MPlayer will use IPU to optimize the decoding process.
|
|
+ *
|
|
+ * If you do not want to run the MPlayer, you can comment it.
|
|
+ */
|
|
+#define CONFIG_RESERVE_IPU_MEM 1
|
|
+
|
|
+struct proc_dir_entry *proc_jz_root;
|
|
+
|
|
+
|
|
+/*
|
|
+ * EMC Modules
|
|
+ */
|
|
+static int emc_read_proc (char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+
|
|
+ len += sprintf (page+len, "SMCR(0-5): 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", REG_EMC_SMCR0, REG_EMC_SMCR1, REG_EMC_SMCR2, REG_EMC_SMCR3, REG_EMC_SMCR4);
|
|
+ len += sprintf (page+len, "SACR(0-5): 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", REG_EMC_SACR0, REG_EMC_SACR1, REG_EMC_SACR2, REG_EMC_SACR3, REG_EMC_SACR4);
|
|
+ len += sprintf (page+len, "DMCR: 0x%08x\n", REG_EMC_DMCR);
|
|
+ len += sprintf (page+len, "RTCSR: 0x%04x\n", REG_EMC_RTCSR);
|
|
+ len += sprintf (page+len, "RTCOR: 0x%04x\n", REG_EMC_RTCOR);
|
|
+ return len;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Power Manager Module
|
|
+ */
|
|
+static int pmc_read_proc (char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+ unsigned long lcr = REG_CPM_LCR;
|
|
+ unsigned long clkgr = REG_CPM_CLKGR;
|
|
+
|
|
+ len += sprintf (page+len, "Low Power Mode : %s\n",
|
|
+ ((lcr & CPM_LCR_LPM_MASK) == (CPM_LCR_LPM_IDLE)) ?
|
|
+ "IDLE" : (((lcr & CPM_LCR_LPM_MASK) == (CPM_LCR_LPM_SLEEP)) ?
|
|
+ "SLEEP" : "HIBERNATE"));
|
|
+ len += sprintf (page+len, "Doze Mode : %s\n",
|
|
+ (lcr & CPM_LCR_DOZE_ON) ? "on" : "off");
|
|
+ if (lcr & CPM_LCR_DOZE_ON)
|
|
+ len += sprintf (page+len, " duty : %d\n", (int)((lcr & CPM_LCR_DOZE_DUTY_MASK) >> CPM_LCR_DOZE_DUTY_BIT));
|
|
+ len += sprintf (page+len, "IPU : %s\n",
|
|
+ (clkgr & CPM_CLKGR_IPU) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "DMAC : %s\n",
|
|
+ (clkgr & CPM_CLKGR_DMAC) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "UHC : %s\n",
|
|
+ (clkgr & CPM_CLKGR_UHC) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "UDC : %s\n",
|
|
+ (clkgr & CPM_CLKGR_UDC) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "LCD : %s\n",
|
|
+ (clkgr & CPM_CLKGR_LCD) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "CIM : %s\n",
|
|
+ (clkgr & CPM_CLKGR_CIM) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "SADC : %s\n",
|
|
+ (clkgr & CPM_CLKGR_SADC) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "MSC : %s\n",
|
|
+ (clkgr & CPM_CLKGR_MSC) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "AIC1 : %s\n",
|
|
+ (clkgr & CPM_CLKGR_AIC1) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "AIC2 : %s\n",
|
|
+ (clkgr & CPM_CLKGR_AIC2) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "SSI : %s\n",
|
|
+ (clkgr & CPM_CLKGR_SSI) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "I2C : %s\n",
|
|
+ (clkgr & CPM_CLKGR_I2C) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "RTC : %s\n",
|
|
+ (clkgr & CPM_CLKGR_RTC) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "TCU : %s\n",
|
|
+ (clkgr & CPM_CLKGR_TCU) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "UART1 : %s\n",
|
|
+ (clkgr & CPM_CLKGR_UART1) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "UART0 : %s\n",
|
|
+ (clkgr & CPM_CLKGR_UART0) ? "stopped" : "running");
|
|
+ return len;
|
|
+}
|
|
+
|
|
+static int pmc_write_proc(struct file *file, const char *buffer, unsigned long count, void *data)
|
|
+{
|
|
+ REG_CPM_CLKGR = simple_strtoul(buffer, 0, 16);
|
|
+ return count;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Clock Generation Module
|
|
+ */
|
|
+#define TO_MHZ(x) (x/1000000),(x%1000000)/10000
|
|
+#define TO_KHZ(x) (x/1000),(x%1000)/10
|
|
+
|
|
+static int cgm_read_proc (char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+ unsigned int cppcr = REG_CPM_CPPCR; /* PLL Control Register */
|
|
+ unsigned int cpccr = REG_CPM_CPCCR; /* Clock Control Register */
|
|
+ unsigned int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
|
|
+ unsigned int od[4] = {1, 2, 2, 4};
|
|
+
|
|
+ len += sprintf (page+len, "CPPCR : 0x%08x\n", cppcr);
|
|
+ len += sprintf (page+len, "CPCCR : 0x%08x\n", cpccr);
|
|
+ len += sprintf (page+len, "PLL : %s\n",
|
|
+ (cppcr & CPM_CPPCR_PLLEN) ? "ON" : "OFF");
|
|
+ len += sprintf (page+len, "m:n:o : %d:%d:%d\n",
|
|
+ __cpm_get_pllm() + 2,
|
|
+ __cpm_get_plln() + 2,
|
|
+ od[__cpm_get_pllod()]
|
|
+ );
|
|
+ len += sprintf (page+len, "C:H:M:P : %d:%d:%d:%d\n",
|
|
+ div[__cpm_get_cdiv()],
|
|
+ div[__cpm_get_hdiv()],
|
|
+ div[__cpm_get_mdiv()],
|
|
+ div[__cpm_get_pdiv()]
|
|
+ );
|
|
+ len += sprintf (page+len, "PLL Freq : %3d.%02d MHz\n", TO_MHZ(__cpm_get_pllout()));
|
|
+ len += sprintf (page+len, "CCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_cclk()));
|
|
+ len += sprintf (page+len, "HCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_hclk()));
|
|
+ len += sprintf (page+len, "MCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_mclk()));
|
|
+ len += sprintf (page+len, "PCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_pclk()));
|
|
+ len += sprintf (page+len, "LCDCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_lcdclk()));
|
|
+ len += sprintf (page+len, "PIXCLK : %3d.%02d KHz\n", TO_KHZ(__cpm_get_pixclk()));
|
|
+ len += sprintf (page+len, "I2SCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_i2sclk()));
|
|
+ len += sprintf (page+len, "USBCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_usbclk()));
|
|
+ len += sprintf (page+len, "MSCCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_mscclk()));
|
|
+ len += sprintf (page+len, "EXTALCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_extalclk()));
|
|
+ len += sprintf (page+len, "RTCCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_rtcclk()));
|
|
+
|
|
+ return len;
|
|
+}
|
|
+
|
|
+static int cgm_write_proc(struct file *file, const char *buffer, unsigned long count, void *data)
|
|
+{
|
|
+ REG_CPM_CPCCR = simple_strtoul(buffer, 0, 16);
|
|
+ return count;
|
|
+}
|
|
+
|
|
+
|
|
+/*
|
|
+ * UDC hotplug
|
|
+ */
|
|
+#ifdef CONFIG_JZ_UDC_HOTPLUG
|
|
+extern int jz_udc_active; /* defined in drivers/char/jzchar/jz_udc_hotplug.c */
|
|
+#endif
|
|
+
|
|
+#ifndef GPIO_UDC_HOTPLUG
|
|
+#define GPIO_UDC_HOTPLUG 86
|
|
+#endif
|
|
+
|
|
+static int udc_read_proc(char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+
|
|
+ if (__gpio_get_pin(GPIO_UDC_HOTPLUG)) {
|
|
+
|
|
+#ifdef CONFIG_JZ_UDC_HOTPLUG
|
|
+
|
|
+ /* Cable has connected, wait for disconnection. */
|
|
+ __gpio_as_irq_fall_edge(GPIO_UDC_HOTPLUG);
|
|
+
|
|
+ if (jz_udc_active)
|
|
+ len += sprintf (page+len, "CONNECT_CABLE\n");
|
|
+ else
|
|
+ len += sprintf (page+len, "CONNECT_POWER\n");
|
|
+#else
|
|
+ len += sprintf (page+len, "CONNECT\n");
|
|
+#endif
|
|
+ }
|
|
+ else {
|
|
+
|
|
+#ifdef CONFIG_JZ_UDC_HOTPLUG
|
|
+ /* Cable has disconnected, wait for connection. */
|
|
+ __gpio_as_irq_rise_edge(GPIO_UDC_HOTPLUG);
|
|
+#endif
|
|
+
|
|
+ len += sprintf (page+len, "REMOVE\n");
|
|
+ }
|
|
+
|
|
+ return len;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * MMC/SD hotplug
|
|
+ */
|
|
+
|
|
+#ifndef MSC_HOTPLUG_PIN
|
|
+#define MSC_HOTPLUG_PIN 90
|
|
+#endif
|
|
+
|
|
+static int mmc_read_proc (char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+
|
|
+#if defined(CONFIG_JZ4740_LYRA)
|
|
+ if (!(__gpio_get_pin(MSC_HOTPLUG_PIN)))
|
|
+#else
|
|
+ if (__gpio_get_pin(MSC_HOTPLUG_PIN))
|
|
+#endif
|
|
+ len += sprintf (page+len, "REMOVE\n");
|
|
+ else
|
|
+ len += sprintf (page+len, "INSERT\n");
|
|
+
|
|
+ return len;
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_RESERVE_IPU_MEM
|
|
+
|
|
+/* USAGE:
|
|
+ * echo n > /proc/jz/ipu // n = [1,...,9], alloc mem, 2^n pages.
|
|
+ * echo FF > /proc/jz/ipu // 255, free all buffer
|
|
+ * echo xxxx > /proc/jz/ipu // free buffer which addr is xxxx
|
|
+ * echo llll > /proc/jz/ipu // add_wired_entry(l,l,l,l)
|
|
+ * echo 0 > /proc/jz/ipu // debug, print ipu_buf
|
|
+ * od -X /proc/jz/ipu // read mem addr
|
|
+ */
|
|
+
|
|
+typedef struct _ipu_buf {
|
|
+ unsigned int addr; /* phys addr */
|
|
+ unsigned int page_shift;
|
|
+} ipu_buf_t;
|
|
+
|
|
+#define IPU_BUF_MAX 4 /* 4 buffers */
|
|
+
|
|
+static struct _ipu_buf ipu_buf[IPU_BUF_MAX];
|
|
+static int ipu_buf_cnt = 0;
|
|
+static unsigned char g_asid=0;
|
|
+
|
|
+extern void local_flush_tlb_all(void);
|
|
+
|
|
+/* CP0 hazard avoidance. */
|
|
+#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \
|
|
+ "nop; nop; nop; nop; nop; nop;\n\t" \
|
|
+ ".set reorder\n\t")
|
|
+void show_tlb(void)
|
|
+{
|
|
+#define ASID_MASK 0xFF
|
|
+
|
|
+ unsigned long flags;
|
|
+ unsigned int old_ctx;
|
|
+ unsigned int entry;
|
|
+ unsigned int entrylo0, entrylo1, entryhi;
|
|
+ unsigned int pagemask;
|
|
+
|
|
+ local_irq_save(flags);
|
|
+
|
|
+ /* Save old context */
|
|
+ old_ctx = (read_c0_entryhi() & 0xff);
|
|
+
|
|
+ printk("TLB content:\n");
|
|
+ entry = 0;
|
|
+ while(entry < 32) {
|
|
+ write_c0_index(entry);
|
|
+ BARRIER;
|
|
+ tlb_read();
|
|
+ BARRIER;
|
|
+ entryhi = read_c0_entryhi();
|
|
+ entrylo0 = read_c0_entrylo0();
|
|
+ entrylo1 = read_c0_entrylo1();
|
|
+ pagemask = read_c0_pagemask();
|
|
+ printk("%02d: ASID=%02d%s VA=0x%08x ", entry, entryhi & ASID_MASK, (entrylo0 & entrylo1 & 1) ? "(G)" : " ", entryhi & ~ASID_MASK);
|
|
+ printk("PA0=0x%08x C0=%x %s%s%s\n", (entrylo0>>6)<<12, (entrylo0>>3) & 7, (entrylo0 & 4) ? "Dirty " : "", (entrylo0 & 2) ? "Valid " : "Invalid ", (entrylo0 & 1) ? "Global" : "");
|
|
+ printk("\t\t\t PA1=0x%08x C1=%x %s%s%s\n", (entrylo1>>6)<<12, (entrylo1>>3) & 7, (entrylo1 & 4) ? "Dirty " : "", (entrylo1 & 2) ? "Valid " : "Invalid ", (entrylo1 & 1) ? "Global" : "");
|
|
+
|
|
+ printk("\t\tpagemask=0x%08x", pagemask);
|
|
+ printk("\tentryhi=0x%08x\n", entryhi);
|
|
+ printk("\t\tentrylo0=0x%08x", entrylo0);
|
|
+ printk("\tentrylo1=0x%08x\n", entrylo1);
|
|
+
|
|
+ entry++;
|
|
+ }
|
|
+ BARRIER;
|
|
+ write_c0_entryhi(old_ctx);
|
|
+
|
|
+ local_irq_restore(flags);
|
|
+}
|
|
+
|
|
+static void ipu_add_wired_entry(unsigned long pid,
|
|
+ unsigned long entrylo0, unsigned long entrylo1,
|
|
+ unsigned long entryhi, unsigned long pagemask)
|
|
+{
|
|
+ unsigned long flags;
|
|
+ unsigned long wired;
|
|
+ unsigned long old_pagemask;
|
|
+ unsigned long old_ctx;
|
|
+ struct task_struct *g, *p;
|
|
+
|
|
+ /* We will lock an 4MB page size entry to map the 4MB reserved IPU memory */
|
|
+ wired = read_c0_wired();
|
|
+ if (wired) return;
|
|
+
|
|
+ do_each_thread(g, p) {
|
|
+ if (p->pid == pid )
|
|
+ g_asid = p->mm->context[0];
|
|
+ } while_each_thread(g, p);
|
|
+
|
|
+ local_irq_save(flags);
|
|
+
|
|
+ entrylo0 = entrylo0 >> 6; /* PFN */
|
|
+ entrylo0 |= 0x6 | (0 << 3); /* Write-through cacheable, dirty, valid */
|
|
+
|
|
+ /* Save old context and create impossible VPN2 value */
|
|
+ old_ctx = read_c0_entryhi() & 0xff;
|
|
+ old_pagemask = read_c0_pagemask();
|
|
+ write_c0_wired(wired + 1);
|
|
+ write_c0_index(wired);
|
|
+ BARRIER;
|
|
+ entryhi &= ~0xff; /* new add, 20070906 */
|
|
+ entryhi |= g_asid; /* new add, 20070906 */
|
|
+// entryhi |= old_ctx; /* new add, 20070906 */
|
|
+ write_c0_pagemask(pagemask);
|
|
+ write_c0_entryhi(entryhi);
|
|
+ write_c0_entrylo0(entrylo0);
|
|
+ write_c0_entrylo1(entrylo1);
|
|
+ BARRIER;
|
|
+ tlb_write_indexed();
|
|
+ BARRIER;
|
|
+
|
|
+ write_c0_entryhi(old_ctx);
|
|
+ BARRIER;
|
|
+ write_c0_pagemask(old_pagemask);
|
|
+ local_flush_tlb_all();
|
|
+ local_irq_restore(flags);
|
|
+#if defined(DEBUG)
|
|
+ printk("\nold_ctx=%03d\n", old_ctx);
|
|
+
|
|
+ show_tlb();
|
|
+#endif
|
|
+}
|
|
+
|
|
+static void ipu_del_wired_entry( void )
|
|
+{
|
|
+ unsigned long flags;
|
|
+ unsigned long wired;
|
|
+
|
|
+ /* Free all lock entry */
|
|
+ local_irq_save(flags);
|
|
+ wired = read_c0_wired();
|
|
+ if (wired)
|
|
+ write_c0_wired(0);
|
|
+ local_irq_restore(flags);
|
|
+}
|
|
+
|
|
+static inline void ipu_buf_get( unsigned int page_shift )
|
|
+{
|
|
+ unsigned char * virt_addr;
|
|
+ int i;
|
|
+ for ( i=0; i< IPU_BUF_MAX; ++i ) {
|
|
+ if ( ipu_buf[i].addr == 0 ) {
|
|
+ break;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ if ( (ipu_buf_cnt = i) == IPU_BUF_MAX ) {
|
|
+ printk("Error, no free ipu buffer.\n");
|
|
+ return ;
|
|
+ }
|
|
+
|
|
+ virt_addr = (unsigned char *)__get_free_pages(GFP_KERNEL, page_shift);
|
|
+
|
|
+ if ( virt_addr ) {
|
|
+ ipu_buf[ipu_buf_cnt].addr = (unsigned int)virt_to_phys((void *)virt_addr);
|
|
+ ipu_buf[ipu_buf_cnt].page_shift = page_shift;
|
|
+
|
|
+ for (i = 0; i < (1<<page_shift); i++) {
|
|
+ SetPageReserved(virt_to_page(virt_addr));
|
|
+ virt_addr += PAGE_SIZE;
|
|
+ }
|
|
+ }
|
|
+ else {
|
|
+ printk("get memory Failed.\n");
|
|
+ }
|
|
+}
|
|
+
|
|
+static inline void ipu_buf_free( unsigned int phys_addr )
|
|
+{
|
|
+ unsigned char * virt_addr, *addr;
|
|
+ int cnt, i;
|
|
+
|
|
+ if ( phys_addr == 0 )
|
|
+ return ;
|
|
+
|
|
+ for ( cnt=0; cnt<IPU_BUF_MAX; ++cnt )
|
|
+ if ( phys_addr == ipu_buf[cnt].addr )
|
|
+ break;
|
|
+
|
|
+ if ( cnt == IPU_BUF_MAX ) { /* addr not in the ipu buffers */
|
|
+ printk("Invalid addr:0x%08x\n", (unsigned int)phys_addr);
|
|
+ }
|
|
+
|
|
+ virt_addr = (unsigned char *)phys_to_virt(ipu_buf[cnt].addr);
|
|
+ addr = virt_addr;
|
|
+ for (i = 0; i < (1<<ipu_buf[cnt].page_shift); i++) {
|
|
+ ClearPageReserved(virt_to_page(addr));
|
|
+ addr += PAGE_SIZE;
|
|
+ }
|
|
+
|
|
+ if ( cnt == 0 )
|
|
+ ipu_del_wired_entry();
|
|
+
|
|
+ free_pages((unsigned long )virt_addr, ipu_buf[cnt].page_shift);
|
|
+
|
|
+ ipu_buf[cnt].addr = 0;
|
|
+ ipu_buf[cnt].page_shift = 0;
|
|
+}
|
|
+
|
|
+static int ipu_read_proc (char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+
|
|
+ /* read as binary */
|
|
+ unsigned int * pint;
|
|
+ pint = (unsigned int *) (page+len);
|
|
+
|
|
+ if ( ipu_buf_cnt >= IPU_BUF_MAX ) { /* failed alloc mem, rturn 0 */
|
|
+ printk("no free buffer.\n");
|
|
+ *pint = 0;
|
|
+ }
|
|
+ else
|
|
+ *pint = (unsigned int )ipu_buf[ipu_buf_cnt].addr; /* phys addr */
|
|
+ len += sizeof(unsigned int);
|
|
+
|
|
+#if defined(DEBUG)
|
|
+ show_tlb();
|
|
+#endif
|
|
+ return len;
|
|
+
|
|
+}
|
|
+
|
|
+static int ipu_write_proc(struct file *file, const char *buffer, unsigned long count, void *data)
|
|
+{
|
|
+ unsigned int val ;
|
|
+ int cnt,i;
|
|
+ char buf[12];
|
|
+ unsigned long pid, entrylo0, entrylo1, entryhi, pagemask;
|
|
+#if defined(DEBUG)
|
|
+ printk("ipu write count=%u\n", count);
|
|
+#endif
|
|
+ if (count == (8*5+1)) {
|
|
+ for (i=0;i<12;i++) buf[i]=0;
|
|
+ strncpy(buf, buffer+8*0, 8);
|
|
+ pid = simple_strtoul(buf, 0, 16);
|
|
+ for (i=0;i<12;i++) buf[i]=0;
|
|
+ strncpy(buf, buffer+8*1, 8);
|
|
+ entrylo0 = simple_strtoul(buf, 0, 16);
|
|
+ for (i=0;i<12;i++) buf[i]=0;
|
|
+ strncpy(buf, buffer+8*2, 8);
|
|
+ entrylo1 = simple_strtoul(buf, 0, 16);
|
|
+ for (i=0;i<12;i++) buf[i]=0;
|
|
+ strncpy(buf, buffer+8*3, 8);
|
|
+ entryhi = simple_strtoul(buf, 0, 16);
|
|
+ for (i=0;i<12;i++) buf[i]=0;
|
|
+ strncpy(buf, buffer+8*4, 8);
|
|
+ pagemask = simple_strtoul(buf, 0, 16);
|
|
+
|
|
+#if defined(DEBUG)
|
|
+ printk("pid=0x%08x, entrylo0=0x%08x, entrylo1=0x%08x, entryhi=0x%08x, pagemask=0x%08x\n",
|
|
+ pid, entrylo0, entrylo1, entryhi, pagemask);
|
|
+#endif
|
|
+ ipu_add_wired_entry( pid, entrylo0, entrylo1, entryhi, pagemask);
|
|
+ return 41;
|
|
+ } else if ( count <= 8+1 ) {
|
|
+ for (i=0;i<12;i++) buf[i]=0;
|
|
+ strncpy(buf, buffer, 8);
|
|
+ val = simple_strtoul(buf, 0, 16);
|
|
+ } else if (count == 44) {
|
|
+ for (i = 0; i < 12; i++)
|
|
+ buf[i] = 0;
|
|
+ strncpy(buf, buffer, 10);
|
|
+ pid = simple_strtoul(buf, 0, 16);
|
|
+ for (i = 0; i < 12; i++)
|
|
+ buf[i] = 0;
|
|
+ strncpy(buf, buffer + 11, 10);
|
|
+ entryhi = simple_strtoul(buf, 0, 16);//vaddr
|
|
+ for (i = 0; i < 12; i++)
|
|
+ buf[i] = 0;
|
|
+ strncpy(buf, buffer + 22, 10);
|
|
+ entrylo0 = simple_strtoul(buf, 0, 16);//paddr
|
|
+ for (i = 0; i < 12; i++)
|
|
+ buf[i] = 0;
|
|
+ strncpy(buf, buffer + 33, 10);
|
|
+ pagemask = simple_strtoul(buf, 0, 16);
|
|
+ pagemask = 0x3ff << 13; /* Fixed to 4MB page size */
|
|
+ ipu_add_wired_entry(pid, entrylo0, 0, entryhi, pagemask);
|
|
+ return 44;
|
|
+ } else {
|
|
+ printk("ipu write count error, count=%d\n.", (unsigned int)count);
|
|
+ return -1;
|
|
+ }
|
|
+
|
|
+ /* val: 1-9, page_shift, val>= 10: ipu_buf.addr */
|
|
+ if ( val == 0 ) { /* debug, print ipu_buf info */
|
|
+ for ( cnt=0; cnt<IPU_BUF_MAX; ++cnt)
|
|
+ printk("ipu_buf[%d]: addr=0x%08x, page_shift=%d\n",
|
|
+ cnt, ipu_buf[cnt].addr, ipu_buf[cnt].page_shift );
|
|
+#if defined(DEBUG)
|
|
+ show_tlb();
|
|
+#endif
|
|
+ }
|
|
+ else if ( 0< val && val < 10 ) {
|
|
+ ipu_buf_get(val);
|
|
+ }
|
|
+ else if ( val == 0xff ) { /* 255: free all ipu_buf */
|
|
+ for ( cnt=0; cnt<IPU_BUF_MAX; ++cnt ) {
|
|
+ ipu_buf_free(ipu_buf[cnt].addr);
|
|
+ }
|
|
+ }
|
|
+ else {
|
|
+ ipu_buf_free(val);
|
|
+ }
|
|
+
|
|
+ return count;
|
|
+}
|
|
+
|
|
+/***********************************************************************
|
|
+ * IPU memory management (used by mplayer and other apps)
|
|
+ *
|
|
+ * We reserved 4MB memory for IPU
|
|
+ * The memory base address is jz_ipu_framebuf
|
|
+ */
|
|
+
|
|
+/* Usage:
|
|
+ *
|
|
+ * echo n > /proc/jz/imem // n = [0,...,10], allocate memory, 2^n pages
|
|
+ * echo xxxxxxxx > /proc/jz/imem // free buffer which addr is xxxxxxxx
|
|
+ * echo FF > /proc/jz/ipu // FF, free all buffers
|
|
+ * od -X /proc/jz/imem // return the allocated buffer address and the max order of free buffer
|
|
+ */
|
|
+
|
|
+//#define DEBUG_IMEM 1
|
|
+
|
|
+#define IMEM_MAX_ORDER 10 /* max 2^10 * 4096 = 4MB */
|
|
+
|
|
+static unsigned int jz_imem_base; /* physical base address of ipu memory */
|
|
+
|
|
+static unsigned int allocated_phys_addr = 0;
|
|
+
|
|
+/*
|
|
+ * Allocated buffer list
|
|
+ */
|
|
+typedef struct imem_list {
|
|
+ unsigned int phys_start; /* physical start addr */
|
|
+ unsigned int phys_end; /* physical end addr */
|
|
+ struct imem_list *next;
|
|
+} imem_list_t;
|
|
+
|
|
+static struct imem_list *imem_list_head = NULL; /* up sorted by phys_start */
|
|
+
|
|
+#ifdef DEBUG_IMEM
|
|
+static void dump_imem_list(void)
|
|
+{
|
|
+ struct imem_list *imem;
|
|
+
|
|
+ printk("*** dump_imem_list 0x%x ***\n", (u32)imem_list_head);
|
|
+ imem = imem_list_head;
|
|
+ while (imem) {
|
|
+ printk("imem=0x%x phys_start=0x%x phys_end=0x%x next=0x%x\n", (u32)imem, imem->phys_start, imem->phys_end, (u32)imem->next);
|
|
+ imem = imem->next;
|
|
+ }
|
|
+}
|
|
+#endif
|
|
+
|
|
+/* allocate 2^order pages inside the 4MB memory */
|
|
+static int imem_alloc(unsigned int order)
|
|
+{
|
|
+ int alloc_ok = 0;
|
|
+ unsigned int start, end;
|
|
+ unsigned int size = (1 << order) * PAGE_SIZE;
|
|
+ struct imem_list *imem, *imemn, *imemp;
|
|
+
|
|
+ allocated_phys_addr = 0;
|
|
+
|
|
+ start = jz_imem_base;
|
|
+ end = start + (1 << IMEM_MAX_ORDER) * PAGE_SIZE;
|
|
+
|
|
+ imem = imem_list_head;
|
|
+ while (imem) {
|
|
+ if ((imem->phys_start - start) >= size) {
|
|
+ /* we got a valid address range */
|
|
+ alloc_ok = 1;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ start = imem->phys_end + 1;
|
|
+ imem = imem->next;
|
|
+ }
|
|
+
|
|
+ if (!alloc_ok) {
|
|
+ if ((end - start) >= size)
|
|
+ alloc_ok = 1;
|
|
+ }
|
|
+
|
|
+ if (alloc_ok) {
|
|
+ end = start + size - 1;
|
|
+ allocated_phys_addr = start;
|
|
+
|
|
+ /* add to imem_list, up sorted by phys_start */
|
|
+ imemn = kmalloc(sizeof(struct imem_list), GFP_KERNEL);
|
|
+ if (!imemn) {
|
|
+ return -ENOMEM;
|
|
+ }
|
|
+ imemn->phys_start = start;
|
|
+ imemn->phys_end = end;
|
|
+ imemn->next = NULL;
|
|
+
|
|
+ if (!imem_list_head)
|
|
+ imem_list_head = imemn;
|
|
+ else {
|
|
+ imem = imemp = imem_list_head;
|
|
+ while (imem) {
|
|
+ if (start < imem->phys_start) {
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ imemp = imem;
|
|
+ imem = imem->next;
|
|
+ }
|
|
+
|
|
+ if (imem == imem_list_head) {
|
|
+ imem_list_head = imemn;
|
|
+ imemn->next = imem;
|
|
+ }
|
|
+ else {
|
|
+ imemn->next = imemp->next;
|
|
+ imemp->next = imemn;
|
|
+ }
|
|
+ }
|
|
+ }
|
|
+
|
|
+#ifdef DEBUG_IMEM
|
|
+ dump_imem_list();
|
|
+#endif
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void imem_free(unsigned int phys_addr)
|
|
+{
|
|
+ struct imem_list *imem, *imemp;
|
|
+
|
|
+ imem = imemp = imem_list_head;
|
|
+ while (imem) {
|
|
+ if (phys_addr == imem->phys_start) {
|
|
+ if (imem == imem_list_head) {
|
|
+ imem_list_head = imem->next;
|
|
+ }
|
|
+ else {
|
|
+ imemp->next = imem->next;
|
|
+ }
|
|
+
|
|
+ kfree(imem);
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ imemp = imem;
|
|
+ imem = imem->next;
|
|
+ }
|
|
+
|
|
+#ifdef DEBUG_IMEM
|
|
+ dump_imem_list();
|
|
+#endif
|
|
+}
|
|
+
|
|
+static void imem_free_all(void)
|
|
+{
|
|
+ struct imem_list *imem;
|
|
+
|
|
+ imem = imem_list_head;
|
|
+ while (imem) {
|
|
+ kfree(imem);
|
|
+ imem = imem->next;
|
|
+ }
|
|
+
|
|
+ imem_list_head = NULL;
|
|
+
|
|
+ allocated_phys_addr = 0;
|
|
+
|
|
+#ifdef DEBUG_IMEM
|
|
+ dump_imem_list();
|
|
+#endif
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Return the allocated buffer address and the max order of free buffer
|
|
+ */
|
|
+static int imem_read_proc(char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+ unsigned int start_addr, end_addr, max_order, max_size;
|
|
+ struct imem_list *imem;
|
|
+
|
|
+ unsigned int *tmp = (unsigned int *)(page + len);
|
|
+
|
|
+ start_addr = jz_imem_base;
|
|
+ end_addr = start_addr + (1 << IMEM_MAX_ORDER) * PAGE_SIZE;
|
|
+
|
|
+ if (!imem_list_head)
|
|
+ max_size = end_addr - start_addr;
|
|
+ else {
|
|
+ max_size = 0;
|
|
+ imem = imem_list_head;
|
|
+ while (imem) {
|
|
+ if (max_size < (imem->phys_start - start_addr))
|
|
+ max_size = imem->phys_start - start_addr;
|
|
+
|
|
+ start_addr = imem->phys_end + 1;
|
|
+ imem = imem->next;
|
|
+ }
|
|
+
|
|
+ if (max_size < (end_addr - start_addr))
|
|
+ max_size = end_addr - start_addr;
|
|
+ }
|
|
+
|
|
+ if (max_size > 0) {
|
|
+ max_order = get_order(max_size);
|
|
+ if (((1 << max_order) * PAGE_SIZE) > max_size)
|
|
+ max_order--;
|
|
+ }
|
|
+ else {
|
|
+ max_order = 0xffffffff; /* No any free buffer */
|
|
+ }
|
|
+
|
|
+ *tmp++ = allocated_phys_addr; /* address allocated by 'echo n > /proc/jz/imem' */
|
|
+ *tmp = max_order; /* max order of current free buffers */
|
|
+
|
|
+ len += 2 * sizeof(unsigned int);
|
|
+
|
|
+ return len;
|
|
+}
|
|
+
|
|
+static int imem_write_proc(struct file *file, const char *buffer, unsigned long count, void *data)
|
|
+{
|
|
+ unsigned int val;
|
|
+
|
|
+ val = simple_strtoul(buffer, 0, 16);
|
|
+
|
|
+ if (val == 0xff) {
|
|
+ /* free all memory */
|
|
+ imem_free_all();
|
|
+ ipu_del_wired_entry();
|
|
+ }
|
|
+ else if ((val >= 0) && (val <= IMEM_MAX_ORDER)) {
|
|
+ /* allocate 2^val pages */
|
|
+ imem_alloc(val);
|
|
+ }
|
|
+ else {
|
|
+ /* free buffer which phys_addr is val */
|
|
+ imem_free(val);
|
|
+ }
|
|
+
|
|
+ return count;
|
|
+}
|
|
+
|
|
+#endif /* CONFIG_RESERVE_IPU_MEM */
|
|
+
|
|
+/*
|
|
+ * /proc/jz/xxx entry
|
|
+ *
|
|
+ */
|
|
+static int __init jz_proc_init(void)
|
|
+{
|
|
+ struct proc_dir_entry *res;
|
|
+#ifdef CONFIG_RESERVE_IPU_MEM
|
|
+ unsigned int virt_addr, i;
|
|
+#endif
|
|
+
|
|
+ proc_jz_root = proc_mkdir("jz", 0);
|
|
+
|
|
+ /* External Memory Controller */
|
|
+ res = create_proc_entry("emc", 0644, proc_jz_root);
|
|
+ if (res) {
|
|
+ res->read_proc = emc_read_proc;
|
|
+ res->write_proc = NULL;
|
|
+ res->data = NULL;
|
|
+ }
|
|
+
|
|
+ /* Power Management Controller */
|
|
+ res = create_proc_entry("pmc", 0644, proc_jz_root);
|
|
+ if (res) {
|
|
+ res->read_proc = pmc_read_proc;
|
|
+ res->write_proc = pmc_write_proc;
|
|
+ res->data = NULL;
|
|
+ }
|
|
+
|
|
+ /* Clock Generation Module */
|
|
+ res = create_proc_entry("cgm", 0644, proc_jz_root);
|
|
+ if (res) {
|
|
+ res->read_proc = cgm_read_proc;
|
|
+ res->write_proc = cgm_write_proc;
|
|
+ res->data = NULL;
|
|
+ }
|
|
+
|
|
+ /* udc hotplug */
|
|
+ res = create_proc_entry("udc", 0644, proc_jz_root);
|
|
+ if (res) {
|
|
+ res->read_proc = udc_read_proc;
|
|
+ res->write_proc = NULL;
|
|
+ res->data = NULL;
|
|
+ }
|
|
+
|
|
+ /* mmc hotplug */
|
|
+ res = create_proc_entry("mmc", 0644, proc_jz_root);
|
|
+ if (res) {
|
|
+ res->read_proc = mmc_read_proc;
|
|
+ res->write_proc = NULL;
|
|
+ res->data = NULL;
|
|
+ }
|
|
+
|
|
+#ifdef CONFIG_RESERVE_IPU_MEM
|
|
+ /* Image process unit */
|
|
+ res = create_proc_entry("ipu", 0644, proc_jz_root);
|
|
+ if (res) {
|
|
+ res->read_proc = ipu_read_proc;
|
|
+ res->write_proc = ipu_write_proc;
|
|
+ res->data = NULL;
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * Reserve a 4MB memory for IPU on JZ4740.
|
|
+ */
|
|
+ jz_imem_base = (unsigned int)__get_free_pages(GFP_KERNEL, IMEM_MAX_ORDER);
|
|
+ if (jz_imem_base) {
|
|
+ /* imem (IPU memory management) */
|
|
+ res = create_proc_entry("imem", 0644, proc_jz_root);
|
|
+ if (res) {
|
|
+ res->read_proc = imem_read_proc;
|
|
+ res->write_proc = imem_write_proc;
|
|
+ res->data = NULL;
|
|
+ }
|
|
+
|
|
+ /* Set page reserved */
|
|
+ virt_addr = jz_imem_base;
|
|
+ for (i = 0; i < (1 << IMEM_MAX_ORDER); i++) {
|
|
+ SetPageReserved(virt_to_page((void *)virt_addr));
|
|
+ virt_addr += PAGE_SIZE;
|
|
+ }
|
|
+
|
|
+ /* Convert to physical address */
|
|
+ jz_imem_base = virt_to_phys((void *)jz_imem_base);
|
|
+
|
|
+ printk("Total %dMB memory at 0x%x was reserved for IPU\n",
|
|
+ (unsigned int)((1 << IMEM_MAX_ORDER) * PAGE_SIZE)/1000000, jz_imem_base);
|
|
+ }
|
|
+#endif
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+__initcall(jz_proc_init);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4740/prom.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4740/prom.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,198 @@
|
|
+/*
|
|
+ *
|
|
+ * BRIEF MODULE DESCRIPTION
|
|
+ * PROM library initialisation code, supports YAMON and U-Boot.
|
|
+ *
|
|
+ * Copyright 2000, 2001, 2006 MontaVista Software Inc.
|
|
+ * Author: MontaVista Software, Inc.
|
|
+ * ppopov@mvista.com or source@mvista.com
|
|
+ *
|
|
+ * This file was derived from Carsten Langgaard's
|
|
+ * arch/mips/mips-boards/xx files.
|
|
+ *
|
|
+ * Carsten Langgaard, carstenl@mips.com
|
|
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License as published by the
|
|
+ * Free Software Foundation; either version 2 of the License, or (at your
|
|
+ * option) any later version.
|
|
+ *
|
|
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
|
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
|
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License along
|
|
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
|
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
+ */
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/string.h>
|
|
+
|
|
+#include <asm/bootinfo.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+/* #define DEBUG_CMDLINE */
|
|
+
|
|
+int prom_argc;
|
|
+char **prom_argv, **prom_envp;
|
|
+
|
|
+char * prom_getcmdline(void)
|
|
+{
|
|
+ return &(arcs_cmdline[0]);
|
|
+}
|
|
+
|
|
+void prom_init_cmdline(void)
|
|
+{
|
|
+ char *cp;
|
|
+ int actr;
|
|
+
|
|
+ actr = 1; /* Always ignore argv[0] */
|
|
+
|
|
+ cp = &(arcs_cmdline[0]);
|
|
+ while(actr < prom_argc) {
|
|
+ strcpy(cp, prom_argv[actr]);
|
|
+ cp += strlen(prom_argv[actr]);
|
|
+ *cp++ = ' ';
|
|
+ actr++;
|
|
+ }
|
|
+ if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
|
|
+ --cp;
|
|
+ if (prom_argc > 1)
|
|
+ *cp = '\0';
|
|
+
|
|
+}
|
|
+
|
|
+
|
|
+char *prom_getenv(char *envname)
|
|
+{
|
|
+#if 0
|
|
+ /*
|
|
+ * Return a pointer to the given environment variable.
|
|
+ * YAMON uses "name", "value" pairs, while U-Boot uses "name=value".
|
|
+ */
|
|
+
|
|
+ char **env = prom_envp;
|
|
+ int i = strlen(envname);
|
|
+ int yamon = (*env && strchr(*env, '=') == NULL);
|
|
+
|
|
+ while (*env) {
|
|
+ if (yamon) {
|
|
+ if (strcmp(envname, *env++) == 0)
|
|
+ return *env;
|
|
+ } else {
|
|
+ if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=')
|
|
+ return *env + i + 1;
|
|
+ }
|
|
+ env++;
|
|
+ }
|
|
+#endif
|
|
+ return NULL;
|
|
+}
|
|
+
|
|
+inline unsigned char str2hexnum(unsigned char c)
|
|
+{
|
|
+ if(c >= '0' && c <= '9')
|
|
+ return c - '0';
|
|
+ if(c >= 'a' && c <= 'f')
|
|
+ return c - 'a' + 10;
|
|
+ if(c >= 'A' && c <= 'F')
|
|
+ return c - 'A' + 10;
|
|
+ return 0; /* foo */
|
|
+}
|
|
+
|
|
+inline void str2eaddr(unsigned char *ea, unsigned char *str)
|
|
+{
|
|
+ int i;
|
|
+
|
|
+ for(i = 0; i < 6; i++) {
|
|
+ unsigned char num;
|
|
+
|
|
+ if((*str == '.') || (*str == ':'))
|
|
+ str++;
|
|
+ num = str2hexnum(*str++) << 4;
|
|
+ num |= (str2hexnum(*str++));
|
|
+ ea[i] = num;
|
|
+ }
|
|
+}
|
|
+
|
|
+int get_ethernet_addr(char *ethernet_addr)
|
|
+{
|
|
+ char *ethaddr_str;
|
|
+
|
|
+ ethaddr_str = prom_getenv("ethaddr");
|
|
+ if (!ethaddr_str) {
|
|
+ printk("ethaddr not set in boot prom\n");
|
|
+ return -1;
|
|
+ }
|
|
+ str2eaddr(ethernet_addr, ethaddr_str);
|
|
+
|
|
+#if 0
|
|
+ {
|
|
+ int i;
|
|
+
|
|
+ printk("get_ethernet_addr: ");
|
|
+ for (i=0; i<5; i++)
|
|
+ printk("%02x:", (unsigned char)*(ethernet_addr+i));
|
|
+ printk("%02x\n", *(ethernet_addr+i));
|
|
+ }
|
|
+#endif
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+void __init prom_free_prom_memory(void)
|
|
+{
|
|
+}
|
|
+
|
|
+void __init prom_init(void)
|
|
+{
|
|
+ unsigned char *memsize_str;
|
|
+ unsigned long memsize;
|
|
+
|
|
+ prom_argc = (int) fw_arg0;
|
|
+ prom_argv = (char **) fw_arg1;
|
|
+ prom_envp = (char **) fw_arg2;
|
|
+
|
|
+ mips_machtype = MACH_INGENIC_JZ4740;
|
|
+
|
|
+ prom_init_cmdline();
|
|
+ memsize_str = prom_getenv("memsize");
|
|
+ if (!memsize_str) {
|
|
+ memsize = 0x04000000;
|
|
+ } else {
|
|
+ memsize = simple_strtol(memsize_str, NULL, 0);
|
|
+ }
|
|
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
|
|
+}
|
|
+
|
|
+/* used by early printk */
|
|
+void prom_putchar(char c)
|
|
+{
|
|
+ volatile u8 *uart_lsr = (volatile u8 *)(UART0_BASE + OFF_LSR);
|
|
+ volatile u8 *uart_tdr = (volatile u8 *)(UART0_BASE + OFF_TDR);
|
|
+
|
|
+ /* Wait for fifo to shift out some bytes */
|
|
+ while ( !((*uart_lsr & (UARTLSR_TDRQ | UARTLSR_TEMT)) == 0x60) );
|
|
+
|
|
+ *uart_tdr = (u8)c;
|
|
+}
|
|
+
|
|
+const char *get_system_type(void)
|
|
+{
|
|
+ return "JZ4740";
|
|
+}
|
|
+
|
|
+EXPORT_SYMBOL(prom_getcmdline);
|
|
+EXPORT_SYMBOL(get_ethernet_addr);
|
|
+EXPORT_SYMBOL(str2eaddr);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4740/reset.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4740/reset.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,46 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4740/reset.c
|
|
+ *
|
|
+ * JZ4740 reset routines.
|
|
+ *
|
|
+ * Copyright (c) 2006-2007 Ingenic Semiconductor Inc.
|
|
+ * Author: <yliu@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+#include <linux/sched.h>
|
|
+#include <linux/mm.h>
|
|
+#include <asm/io.h>
|
|
+#include <asm/pgtable.h>
|
|
+#include <asm/processor.h>
|
|
+#include <asm/reboot.h>
|
|
+#include <asm/system.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+void jz_restart(char *command)
|
|
+{
|
|
+ printk("Restarting after 4 ms\n");
|
|
+ REG_WDT_TCSR = WDT_TCSR_PRESCALE4 | WDT_TCSR_EXT_EN;
|
|
+ REG_WDT_TCNT = 0;
|
|
+ REG_WDT_TDR = JZ_EXTAL/1000; /* reset after 4ms */
|
|
+ REG_TCU_TSCR = TCU_TSSR_WDTSC; /* enable wdt clock */
|
|
+ REG_WDT_TCER = WDT_TCER_TCEN; /* wdt start */
|
|
+ while (1);
|
|
+}
|
|
+
|
|
+void jz_halt(void)
|
|
+{
|
|
+ printk(KERN_NOTICE "\n** You can safely turn off the power\n");
|
|
+
|
|
+ while (1)
|
|
+ __asm__(".set\tmips3\n\t"
|
|
+ "wait\n\t"
|
|
+ ".set\tmips0");
|
|
+}
|
|
+
|
|
+void jz_power_off(void)
|
|
+{
|
|
+ jz_halt();
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/jz4740/setup.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4740/setup.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,182 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4740/common/setup.c
|
|
+ *
|
|
+ * JZ4740 common setup routines.
|
|
+ *
|
|
+ * Copyright (C) 2006 Ingenic Semiconductor Inc.
|
|
+ *
|
|
+ * This program is free software; you can distribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License (Version 2) as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ * This program is distributed in the hope it will be useful, but WITHOUT
|
|
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
+ * for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License along
|
|
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
|
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
|
|
+ *
|
|
+ */
|
|
+#include <linux/init.h>
|
|
+#include <linux/string.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/io.h>
|
|
+#include <linux/irq.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/tty.h>
|
|
+#include <linux/serial.h>
|
|
+#include <linux/serial_core.h>
|
|
+#include <linux/serial_8250.h>
|
|
+
|
|
+#include <asm/cpu.h>
|
|
+#include <asm/bootinfo.h>
|
|
+#include <asm/irq.h>
|
|
+#include <asm/mipsregs.h>
|
|
+#include <asm/reboot.h>
|
|
+#include <asm/pgtable.h>
|
|
+#include <asm/time.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+#ifdef CONFIG_PC_KEYB
|
|
+#include <asm/keyboard.h>
|
|
+#endif
|
|
+
|
|
+jz_clocks_t jz_clocks;
|
|
+
|
|
+extern char * __init prom_getcmdline(void);
|
|
+extern void __init jz_board_setup(void);
|
|
+extern void jz_restart(char *);
|
|
+extern void jz_halt(void);
|
|
+extern void jz_power_off(void);
|
|
+extern void jz_time_init(void);
|
|
+
|
|
+static void __init sysclocks_setup(void)
|
|
+{
|
|
+#ifndef CONFIG_MIPS_JZ_EMURUS /* FPGA */
|
|
+ jz_clocks.cclk = __cpm_get_cclk();
|
|
+ jz_clocks.hclk = __cpm_get_hclk();
|
|
+ jz_clocks.pclk = __cpm_get_pclk();
|
|
+ jz_clocks.mclk = __cpm_get_mclk();
|
|
+ jz_clocks.lcdclk = __cpm_get_lcdclk();
|
|
+ jz_clocks.pixclk = __cpm_get_pixclk();
|
|
+ jz_clocks.i2sclk = __cpm_get_i2sclk();
|
|
+ jz_clocks.usbclk = __cpm_get_usbclk();
|
|
+ jz_clocks.mscclk = __cpm_get_mscclk();
|
|
+ jz_clocks.extalclk = __cpm_get_extalclk();
|
|
+ jz_clocks.rtcclk = __cpm_get_rtcclk();
|
|
+#else
|
|
+
|
|
+#define FPGACLK 8000000
|
|
+
|
|
+ jz_clocks.cclk = FPGACLK;
|
|
+ jz_clocks.hclk = FPGACLK;
|
|
+ jz_clocks.pclk = FPGACLK;
|
|
+ jz_clocks.mclk = FPGACLK;
|
|
+ jz_clocks.lcdclk = FPGACLK;
|
|
+ jz_clocks.pixclk = FPGACLK;
|
|
+ jz_clocks.i2sclk = FPGACLK;
|
|
+ jz_clocks.usbclk = FPGACLK;
|
|
+ jz_clocks.mscclk = FPGACLK;
|
|
+ jz_clocks.extalclk = FPGACLK;
|
|
+ jz_clocks.rtcclk = FPGACLK;
|
|
+#endif
|
|
+
|
|
+ printk("CPU clock: %dMHz, System clock: %dMHz, Peripheral clock: %dMHz, Memory clock: %dMHz\n",
|
|
+ (jz_clocks.cclk + 500000) / 1000000,
|
|
+ (jz_clocks.hclk + 500000) / 1000000,
|
|
+ (jz_clocks.pclk + 500000) / 1000000,
|
|
+ (jz_clocks.mclk + 500000) / 1000000);
|
|
+}
|
|
+
|
|
+static void __init soc_cpm_setup(void)
|
|
+{
|
|
+ /* Start all module clocks
|
|
+ */
|
|
+ __cpm_start_all();
|
|
+
|
|
+ /* Enable CKO to external memory */
|
|
+ __cpm_enable_cko();
|
|
+
|
|
+ /* CPU enters IDLE mode when executing 'wait' instruction */
|
|
+ __cpm_idle_mode();
|
|
+
|
|
+ /* Setup system clocks */
|
|
+ sysclocks_setup();
|
|
+}
|
|
+
|
|
+static void __init soc_harb_setup(void)
|
|
+{
|
|
+// __harb_set_priority(0x00); /* CIM>LCD>DMA>ETH>PCI>USB>CBB */
|
|
+// __harb_set_priority(0x03); /* LCD>CIM>DMA>ETH>PCI>USB>CBB */
|
|
+// __harb_set_priority(0x0a); /* ETH>LCD>CIM>DMA>PCI>USB>CBB */
|
|
+}
|
|
+
|
|
+static void __init soc_emc_setup(void)
|
|
+{
|
|
+}
|
|
+
|
|
+static void __init soc_dmac_setup(void)
|
|
+{
|
|
+ __dmac_enable_module();
|
|
+}
|
|
+
|
|
+static void __init jz_soc_setup(void)
|
|
+{
|
|
+ soc_cpm_setup();
|
|
+ soc_harb_setup();
|
|
+ soc_emc_setup();
|
|
+ soc_dmac_setup();
|
|
+}
|
|
+
|
|
+static void __init jz_serial_setup(void)
|
|
+{
|
|
+#ifdef CONFIG_SERIAL_8250
|
|
+ struct uart_port s;
|
|
+ REG8(UART0_FCR) |= UARTFCR_UUE; /* enable UART module */
|
|
+ memset(&s, 0, sizeof(s));
|
|
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
|
|
+ s.iotype = SERIAL_IO_MEM;
|
|
+ s.regshift = 2;
|
|
+ s.uartclk = jz_clocks.extalclk ;
|
|
+
|
|
+ s.line = 0;
|
|
+ s.membase = (u8 *)UART0_BASE;
|
|
+ s.irq = IRQ_UART0;
|
|
+ if (early_serial_setup(&s) != 0) {
|
|
+ printk(KERN_ERR "Serial ttyS0 setup failed!\n");
|
|
+ }
|
|
+
|
|
+ s.line = 1;
|
|
+ s.membase = (u8 *)UART1_BASE;
|
|
+ s.irq = IRQ_UART1;
|
|
+ if (early_serial_setup(&s) != 0) {
|
|
+ printk(KERN_ERR "Serial ttyS1 setup failed!\n");
|
|
+ }
|
|
+#endif
|
|
+}
|
|
+
|
|
+void __init plat_mem_setup(void)
|
|
+{
|
|
+ char *argptr;
|
|
+
|
|
+ argptr = prom_getcmdline();
|
|
+
|
|
+ /* IO/MEM resources. Which will be the addtion value in `inX' and
|
|
+ * `outX' macros defined in asm/io.h */
|
|
+ set_io_port_base(0);
|
|
+ ioport_resource.start = 0x00000000;
|
|
+ ioport_resource.end = 0xffffffff;
|
|
+ iomem_resource.start = 0x00000000;
|
|
+ iomem_resource.end = 0xffffffff;
|
|
+
|
|
+ _machine_restart = jz_restart;
|
|
+ _machine_halt = jz_halt;
|
|
+ pm_power_off = jz_power_off;
|
|
+
|
|
+ jz_soc_setup();
|
|
+ jz_serial_setup();
|
|
+ jz_board_setup();
|
|
+}
|
|
+
|
|
--- linux-2.6.24.7.old/arch/mips/jz4740/time.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4740/time.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,158 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4740/time.c
|
|
+ *
|
|
+ * Setting up the clock on the JZ4740 boards.
|
|
+ *
|
|
+ * Copyright (C) 2008 Ingenic Semiconductor Inc.
|
|
+ * Author: <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can distribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License (Version 2) as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ * This program is distributed in the hope it will be useful, but WITHOUT
|
|
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
+ * for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License along
|
|
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
|
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
|
|
+ *
|
|
+ */
|
|
+#include <linux/types.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/time.h>
|
|
+#include <linux/clockchips.h>
|
|
+
|
|
+#include <asm/time.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+/* This is for machines which generate the exact clock. */
|
|
+
|
|
+#define JZ_TIMER_CHAN 0
|
|
+#define JZ_TIMER_IRQ IRQ_TCU0
|
|
+
|
|
+#define JZ_TIMER_CLOCK (JZ_EXTAL>>4) /* Jz timer clock frequency */
|
|
+
|
|
+static struct clocksource clocksource_jz; /* Jz clock source */
|
|
+static struct clock_event_device jz_clockevent_device; /* Jz clock event */
|
|
+
|
|
+void (*jz_timer_callback)(void);
|
|
+
|
|
+static irqreturn_t jz_timer_interrupt(int irq, void *dev_id)
|
|
+{
|
|
+ struct clock_event_device *cd = dev_id;
|
|
+
|
|
+ REG_TCU_TFCR = 1 << JZ_TIMER_CHAN; /* ACK timer */
|
|
+
|
|
+ if (jz_timer_callback)
|
|
+ jz_timer_callback();
|
|
+
|
|
+ cd->event_handler(cd);
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+static struct irqaction jz_irqaction = {
|
|
+ .handler = jz_timer_interrupt,
|
|
+ .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER,
|
|
+ .name = "jz-timerirq",
|
|
+};
|
|
+
|
|
+
|
|
+cycle_t jz_get_cycles(void)
|
|
+{
|
|
+ /* convert jiffes to jz timer cycles */
|
|
+ return (cycle_t)( jiffies*((JZ_TIMER_CLOCK)/HZ) + REG_TCU_TCNT(JZ_TIMER_CHAN));
|
|
+}
|
|
+
|
|
+static struct clocksource clocksource_jz = {
|
|
+ .name = "jz_clocksource",
|
|
+ .rating = 300,
|
|
+ .read = jz_get_cycles,
|
|
+ .mask = 0xFFFF,
|
|
+ .shift = 10,
|
|
+ .flags = CLOCK_SOURCE_WATCHDOG,
|
|
+};
|
|
+
|
|
+static int __init jz_clocksource_init(void)
|
|
+{
|
|
+ clocksource_jz.mult = clocksource_hz2mult(JZ_TIMER_CLOCK, clocksource_jz.shift);
|
|
+ clocksource_register(&clocksource_jz);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int jz_set_next_event(unsigned long evt,
|
|
+ struct clock_event_device *unused)
|
|
+{
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void jz_set_mode(enum clock_event_mode mode,
|
|
+ struct clock_event_device *evt)
|
|
+{
|
|
+ switch (mode) {
|
|
+ case CLOCK_EVT_MODE_PERIODIC:
|
|
+ break;
|
|
+ case CLOCK_EVT_MODE_ONESHOT:
|
|
+ case CLOCK_EVT_MODE_UNUSED:
|
|
+ case CLOCK_EVT_MODE_SHUTDOWN:
|
|
+ break;
|
|
+ case CLOCK_EVT_MODE_RESUME:
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+static struct clock_event_device jz_clockevent_device = {
|
|
+ .name = "jz-clockenvent",
|
|
+ .features = CLOCK_EVT_FEAT_PERIODIC,
|
|
+// .features = CLOCK_EVT_FEAT_ONESHOT, /* Jz4740 not support dynamic clock now */
|
|
+
|
|
+ /* .mult, .shift, .max_delta_ns and .min_delta_ns left uninitialized */
|
|
+ .rating = 300,
|
|
+ .irq = JZ_TIMER_IRQ,
|
|
+ .set_mode = jz_set_mode,
|
|
+ .set_next_event = jz_set_next_event,
|
|
+};
|
|
+
|
|
+static void __init jz_clockevent_init(void)
|
|
+{
|
|
+ struct clock_event_device *cd = &jz_clockevent_device;
|
|
+ unsigned int cpu = smp_processor_id();
|
|
+
|
|
+ cd->cpumask = cpumask_of_cpu(cpu);
|
|
+ clockevents_register_device(cd);
|
|
+}
|
|
+
|
|
+static void __init jz_timer_setup(void)
|
|
+{
|
|
+ jz_clocksource_init(); /* init jz clock source */
|
|
+ jz_clockevent_init(); /* init jz clock event */
|
|
+
|
|
+ /*
|
|
+ * Make irqs happen for the system timer
|
|
+ */
|
|
+ jz_irqaction.dev_id = &jz_clockevent_device;
|
|
+ setup_irq(JZ_TIMER_IRQ, &jz_irqaction);
|
|
+}
|
|
+
|
|
+
|
|
+void __init plat_time_init(void)
|
|
+{
|
|
+ unsigned int latch;
|
|
+ /* Init timer */
|
|
+ latch = ( JZ_TIMER_CLOCK + (HZ>>1)) / HZ;
|
|
+
|
|
+ REG_TCU_TCSR(JZ_TIMER_CHAN) = TCU_TCSR_PRESCALE16 | TCU_TCSR_EXT_EN;
|
|
+ REG_TCU_TCNT(JZ_TIMER_CHAN) = 0;
|
|
+ REG_TCU_TDHR(JZ_TIMER_CHAN) = 0;
|
|
+ REG_TCU_TDFR(JZ_TIMER_CHAN) = latch;
|
|
+
|
|
+ REG_TCU_TMSR = (1 << (JZ_TIMER_CHAN + 16)); /* mask half irq */
|
|
+ REG_TCU_TMCR = (1 << JZ_TIMER_CHAN); /* unmask full irq */
|
|
+ REG_TCU_TSCR = (1 << JZ_TIMER_CHAN); /* enable timer clock */
|
|
+ REG_TCU_TESR = (1 << JZ_TIMER_CHAN); /* start counting up */
|
|
+
|
|
+ jz_timer_setup();
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750/Makefile 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750/Makefile 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,23 @@
|
|
+#
|
|
+# Makefile for the Ingenic JZ4750.
|
|
+#
|
|
+
|
|
+# Object file lists.
|
|
+
|
|
+obj-y += prom.o irq.o time.o reset.o setup.o dma.o \
|
|
+ platform.o i2c.o
|
|
+
|
|
+obj-$(CONFIG_PROC_FS) += proc.o
|
|
+
|
|
+# board specific support
|
|
+
|
|
+obj-$(CONFIG_JZ4750_FUWA) += board-fuwa.o
|
|
+obj-$(CONFIG_JZ4750_APUS) += board-apus.o
|
|
+
|
|
+# PM support
|
|
+
|
|
+obj-$(CONFIG_PM_LEGACY) +=pm.o
|
|
+
|
|
+# CPU Frequency scaling support
|
|
+
|
|
+obj-$(CONFIG_CPU_FREQ_JZ) +=cpufreq.o
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750/board-apus.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750/board-apus.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,64 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4750/board-apus.c
|
|
+ *
|
|
+ * JZ4750 APUS board setup routines.
|
|
+ *
|
|
+ * Copyright (c) 2006-2008 Ingenic Semiconductor Inc.
|
|
+ * Author: <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/mm.h>
|
|
+#include <linux/console.h>
|
|
+#include <linux/delay.h>
|
|
+
|
|
+#include <asm/cpu.h>
|
|
+#include <asm/bootinfo.h>
|
|
+#include <asm/mipsregs.h>
|
|
+#include <asm/reboot.h>
|
|
+
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+extern void (*jz_timer_callback)(void);
|
|
+
|
|
+static void dancing(void)
|
|
+{
|
|
+}
|
|
+
|
|
+static void apus_timer_callback(void)
|
|
+{
|
|
+ static unsigned long count = 0;
|
|
+
|
|
+ if ((++count) % 50 == 0) {
|
|
+ dancing();
|
|
+ count = 0;
|
|
+ }
|
|
+}
|
|
+
|
|
+static void __init board_cpm_setup(void)
|
|
+{
|
|
+ /* Stop unused module clocks here.
|
|
+ * We have started all module clocks at arch/mips/jz4750/setup.c.
|
|
+ */
|
|
+}
|
|
+
|
|
+static void __init board_gpio_setup(void)
|
|
+{
|
|
+ __gpio_as_pcm();
|
|
+}
|
|
+
|
|
+void __init jz_board_setup(void)
|
|
+{
|
|
+ printk("JZ4750 APUS board setup\n");
|
|
+
|
|
+ board_cpm_setup();
|
|
+ board_gpio_setup();
|
|
+
|
|
+ jz_timer_callback = apus_timer_callback;
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750/board-fuwa.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750/board-fuwa.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,105 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4750/board-fuwa.c
|
|
+ *
|
|
+ * JZ4750 FUWA board setup routines.
|
|
+ *
|
|
+ * Copyright (c) 2006-2008 Ingenic Semiconductor Inc.
|
|
+ * Author: <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/mm.h>
|
|
+#include <linux/console.h>
|
|
+#include <linux/delay.h>
|
|
+
|
|
+#include <asm/cpu.h>
|
|
+#include <asm/bootinfo.h>
|
|
+#include <asm/mipsregs.h>
|
|
+#include <asm/reboot.h>
|
|
+
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+extern void (*jz_timer_callback)(void);
|
|
+
|
|
+static void dancing(void)
|
|
+{
|
|
+ static unsigned char slash[] = "\\|/-";
|
|
+// static volatile unsigned char *p = (unsigned char *)0xb6000058;
|
|
+ static volatile unsigned char *p = (unsigned char *)0xb6000016;
|
|
+ static unsigned int count = 0;
|
|
+ *p = slash[count++];
|
|
+ count &= 3;
|
|
+}
|
|
+
|
|
+static void fuwa_timer_callback(void)
|
|
+{
|
|
+ static unsigned long count = 0;
|
|
+
|
|
+ if ((++count) % 50 == 0) {
|
|
+ dancing();
|
|
+ count = 0;
|
|
+ }
|
|
+}
|
|
+
|
|
+static void __init board_cpm_setup(void)
|
|
+{
|
|
+ /* Stop unused module clocks here.
|
|
+ * We have started all module clocks at arch/mips/jz4750/setup.c.
|
|
+ */
|
|
+}
|
|
+
|
|
+static void __init board_gpio_setup(void)
|
|
+{
|
|
+ /*
|
|
+ * Initialize SDRAM pins
|
|
+ */
|
|
+
|
|
+ /* PORT A: D0 ~ D31 */
|
|
+ REG_GPIO_PXFUNS(0) = 0xffffffff;
|
|
+ REG_GPIO_PXSELC(0) = 0xffffffff;
|
|
+
|
|
+ /* PORT B: A0 ~ A16, DCS#, RAS#, CAS#, CKE#, RDWE#, CKO#, WE0# */
|
|
+ REG_GPIO_PXFUNS(1) = 0x81f9ffff;
|
|
+ REG_GPIO_PXSELC(1) = 0x81f9ffff;
|
|
+
|
|
+ /* PORT C: WE1#, WE2#, WE3# */
|
|
+ REG_GPIO_PXFUNS(2) = 0x07000000;
|
|
+ REG_GPIO_PXSELC(2) = 0x07000000;
|
|
+
|
|
+
|
|
+ /*
|
|
+ * Initialize UART0 pins
|
|
+ */
|
|
+
|
|
+ /* PORT D: TXD/RXD */
|
|
+ REG_GPIO_PXFUNS(3) = 0x06000000;
|
|
+ REG_GPIO_PXSELS(3) = 0x06000000;
|
|
+
|
|
+
|
|
+ /*
|
|
+ * Initialize LED pins
|
|
+ */
|
|
+ __gpio_as_lcd_18bit();
|
|
+
|
|
+ /* CS2# */
|
|
+ REG_GPIO_PXFUNS(1) = 0x04000000;
|
|
+ REG_GPIO_PXSELC(1) = 0x04000000;
|
|
+
|
|
+ __gpio_as_pcm();
|
|
+}
|
|
+
|
|
+void __init jz_board_setup(void)
|
|
+{
|
|
+ printk("JZ4750 FUWA board setup\n");
|
|
+
|
|
+ board_cpm_setup();
|
|
+ board_gpio_setup();
|
|
+
|
|
+ jz_timer_callback = fuwa_timer_callback;
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750/board-slt50.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750/board-slt50.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,64 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4750/board-apus.c
|
|
+ *
|
|
+ * JZ4750 APUS board setup routines.
|
|
+ *
|
|
+ * Copyright (c) 2006-2008 Ingenic Semiconductor Inc.
|
|
+ * Author: <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/mm.h>
|
|
+#include <linux/console.h>
|
|
+#include <linux/delay.h>
|
|
+
|
|
+#include <asm/cpu.h>
|
|
+#include <asm/bootinfo.h>
|
|
+#include <asm/mipsregs.h>
|
|
+#include <asm/reboot.h>
|
|
+
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+extern void (*jz_timer_callback)(void);
|
|
+
|
|
+static void dancing(void)
|
|
+{
|
|
+}
|
|
+
|
|
+static void apus_timer_callback(void)
|
|
+{
|
|
+ static unsigned long count = 0;
|
|
+
|
|
+ if ((++count) % 50 == 0) {
|
|
+ dancing();
|
|
+ count = 0;
|
|
+ }
|
|
+}
|
|
+
|
|
+static void __init board_cpm_setup(void)
|
|
+{
|
|
+ /* Stop unused module clocks here.
|
|
+ * We have started all module clocks at arch/mips/jz4750/setup.c.
|
|
+ */
|
|
+}
|
|
+
|
|
+static void __init board_gpio_setup(void)
|
|
+{
|
|
+ __gpio_as_pcm();
|
|
+}
|
|
+
|
|
+void __init jz_board_setup(void)
|
|
+{
|
|
+ printk("JZ4750 SLT_50 board setup\n");
|
|
+
|
|
+ board_cpm_setup();
|
|
+ board_gpio_setup();
|
|
+
|
|
+ jz_timer_callback = apus_timer_callback;
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750/cpufreq.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750/cpufreq.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,601 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4750/cpufreq.c
|
|
+ *
|
|
+ * cpufreq driver for JZ4750
|
|
+ *
|
|
+ * Copyright (c) 2006-2008 Ingenic Semiconductor Inc.
|
|
+ * Author: <lhhuang@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/init.h>
|
|
+
|
|
+#include <linux/cpufreq.h>
|
|
+
|
|
+#include <asm/jzsoc.h>
|
|
+#include <asm/processor.h>
|
|
+
|
|
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
|
|
+ "cpufreq-jz4750", msg)
|
|
+
|
|
+#undef CHANGE_PLL
|
|
+
|
|
+#define PLL_UNCHANGED 0
|
|
+#define PLL_GOES_UP 1
|
|
+#define PLL_GOES_DOWN 2
|
|
+
|
|
+#define PLL_WAIT_500NS (500*(__cpm_get_cclk()/1000000000))
|
|
+
|
|
+/* Saved the boot-time parameters */
|
|
+static struct {
|
|
+ /* SDRAM parameters */
|
|
+ unsigned int mclk; /* memory clock, KHz */
|
|
+ unsigned int tras; /* RAS pulse width, cycles of mclk */
|
|
+ unsigned int rcd; /* RAS to CAS Delay, cycles of mclk */
|
|
+ unsigned int tpc; /* RAS Precharge time, cycles of mclk */
|
|
+ unsigned int trwl; /* Write Precharge Time, cycles of mclk */
|
|
+ unsigned int trc; /* RAS Cycle Time, cycles of mclk */
|
|
+ unsigned int rtcor; /* Refresh Time Constant */
|
|
+ unsigned int sdram_initialized;
|
|
+
|
|
+ /* LCD parameters */
|
|
+ unsigned int lcd_clk; /* LCD clock, Hz */
|
|
+ unsigned int lcdpix_clk; /* LCD Pixel clock, Hz */
|
|
+ unsigned int lcd_clks_initialized;
|
|
+} boot_config;
|
|
+
|
|
+struct jz4750_freq_percpu_info {
|
|
+ struct cpufreq_frequency_table table[7];
|
|
+};
|
|
+
|
|
+static struct jz4750_freq_percpu_info jz4750_freq_table;
|
|
+
|
|
+/*
|
|
+ * This contains the registers value for an operating point.
|
|
+ * If only part of a register needs to change then there is
|
|
+ * a mask value for that register.
|
|
+ * When going to a new operating point the current register
|
|
+ * value is ANDed with the ~mask and ORed with the new value.
|
|
+ */
|
|
+struct dpm_regs {
|
|
+ u32 cpccr; /* Clock Freq Control Register */
|
|
+ u32 cpccr_mask; /* Clock Freq Control Register mask */
|
|
+ u32 cppcr; /* PLL1 Control Register */
|
|
+ u32 cppcr_mask; /* PLL1 Control Register mask */
|
|
+ u32 pll_up_flag; /* New PLL freq is higher than current or not */
|
|
+};
|
|
+
|
|
+extern jz_clocks_t jz_clocks;
|
|
+
|
|
+static void jz_update_clocks(void)
|
|
+{
|
|
+ /* Next clocks must be updated if we have changed
|
|
+ * the PLL or divisors.
|
|
+ */
|
|
+ jz_clocks.cclk = __cpm_get_cclk();
|
|
+ jz_clocks.hclk = __cpm_get_hclk();
|
|
+ jz_clocks.mclk = __cpm_get_mclk();
|
|
+ jz_clocks.pclk = __cpm_get_pclk();
|
|
+ jz_clocks.lcdclk = __cpm_get_lcdclk();
|
|
+ jz_clocks.pixclk = __cpm_get_pixclk();
|
|
+ jz_clocks.i2sclk = __cpm_get_i2sclk();
|
|
+ jz_clocks.usbclk = __cpm_get_usbclk();
|
|
+ jz_clocks.mscclk = __cpm_get_mscclk(0);
|
|
+}
|
|
+
|
|
+static void
|
|
+jz_init_boot_config(void)
|
|
+{
|
|
+ if (!boot_config.lcd_clks_initialized) {
|
|
+ /* the first time to scale pll */
|
|
+ boot_config.lcd_clk = __cpm_get_lcdclk();
|
|
+ boot_config.lcdpix_clk = __cpm_get_pixclk();
|
|
+ boot_config.lcd_clks_initialized = 1;
|
|
+ }
|
|
+
|
|
+ if (!boot_config.sdram_initialized) {
|
|
+ /* the first time to scale frequencies */
|
|
+ unsigned int dmcr, rtcor;
|
|
+ unsigned int tras, rcd, tpc, trwl, trc;
|
|
+
|
|
+ dmcr = REG_EMC_DMCR;
|
|
+ rtcor = REG_EMC_RTCOR;
|
|
+
|
|
+ tras = (dmcr >> 13) & 0x7;
|
|
+ rcd = (dmcr >> 11) & 0x3;
|
|
+ tpc = (dmcr >> 8) & 0x7;
|
|
+ trwl = (dmcr >> 5) & 0x3;
|
|
+ trc = (dmcr >> 2) & 0x7;
|
|
+
|
|
+ boot_config.mclk = __cpm_get_mclk() / 1000;
|
|
+ boot_config.tras = tras + 4;
|
|
+ boot_config.rcd = rcd + 1;
|
|
+ boot_config.tpc = tpc + 1;
|
|
+ boot_config.trwl = trwl + 1;
|
|
+ boot_config.trc = trc * 2 + 1;
|
|
+ boot_config.rtcor = rtcor;
|
|
+
|
|
+ boot_config.sdram_initialized = 1;
|
|
+ }
|
|
+}
|
|
+
|
|
+static void jz_update_dram_rtcor(unsigned int new_mclk)
|
|
+{
|
|
+ unsigned int rtcor;
|
|
+
|
|
+ new_mclk /= 1000;
|
|
+ rtcor = boot_config.rtcor * new_mclk / boot_config.mclk;
|
|
+ rtcor--;
|
|
+
|
|
+ if (rtcor < 1) rtcor = 1;
|
|
+ if (rtcor > 255) rtcor = 255;
|
|
+
|
|
+ REG_EMC_RTCOR = rtcor;
|
|
+ REG_EMC_RTCNT = rtcor;
|
|
+}
|
|
+
|
|
+static void jz_update_dram_dmcr(unsigned int new_mclk)
|
|
+{
|
|
+ unsigned int dmcr;
|
|
+ unsigned int tras, rcd, tpc, trwl, trc;
|
|
+ unsigned int valid_time, new_time; /* ns */
|
|
+
|
|
+ new_mclk /= 1000;
|
|
+ tras = boot_config.tras * new_mclk / boot_config.mclk;
|
|
+ rcd = boot_config.rcd * new_mclk / boot_config.mclk;
|
|
+ tpc = boot_config.tpc * new_mclk / boot_config.mclk;
|
|
+ trwl = boot_config.trwl * new_mclk / boot_config.mclk;
|
|
+ trc = boot_config.trc * new_mclk / boot_config.mclk;
|
|
+
|
|
+ /* Validation checking */
|
|
+ valid_time = (boot_config.tras * 1000000) / boot_config.mclk;
|
|
+ new_time = (tras * 1000000) / new_mclk;
|
|
+ if (new_time < valid_time) tras += 1;
|
|
+
|
|
+ valid_time = (boot_config.rcd * 1000000) / boot_config.mclk;
|
|
+ new_time = (rcd * 1000000) / new_mclk;
|
|
+ if (new_time < valid_time) rcd += 1;
|
|
+
|
|
+ valid_time = (boot_config.tpc * 1000000) / boot_config.mclk;
|
|
+ new_time = (tpc * 1000000) / new_mclk;
|
|
+ if (new_time < valid_time) tpc += 1;
|
|
+
|
|
+ valid_time = (boot_config.trwl * 1000000) / boot_config.mclk;
|
|
+ new_time = (trwl * 1000000) / new_mclk;
|
|
+ if (new_time < valid_time) trwl += 1;
|
|
+
|
|
+ valid_time = (boot_config.trc * 1000000) / boot_config.mclk;
|
|
+ new_time = (trc * 1000000) / new_mclk;
|
|
+ if (new_time < valid_time) trc += 2;
|
|
+
|
|
+ tras = (tras < 4) ? 4: tras;
|
|
+ tras = (tras > 11) ? 11: tras;
|
|
+ tras -= 4;
|
|
+
|
|
+ rcd = (rcd < 1) ? 1: rcd;
|
|
+ rcd = (rcd > 4) ? 4: rcd;
|
|
+ rcd -= 1;
|
|
+
|
|
+ tpc = (tpc < 1) ? 1: tpc;
|
|
+ tpc = (tpc > 8) ? 8: tpc;
|
|
+ tpc -= 1;
|
|
+
|
|
+ trwl = (trwl < 1) ? 1: trwl;
|
|
+ trwl = (trwl > 4) ? 4: trwl;
|
|
+ trwl -= 1;
|
|
+
|
|
+ trc = (trc < 1) ? 1: trc;
|
|
+ trc = (trc > 15) ? 15: trc;
|
|
+ trc /= 2;
|
|
+
|
|
+ dmcr = REG_EMC_DMCR;
|
|
+
|
|
+ dmcr &= ~(EMC_DMCR_TRAS_MASK | EMC_DMCR_RCD_MASK | EMC_DMCR_TPC_MASK | EMC_DMCR_TRWL_MASK | EMC_DMCR_TRC_MASK);
|
|
+ dmcr |= ((tras << EMC_DMCR_TRAS_BIT) | (rcd << EMC_DMCR_RCD_BIT) | (tpc << EMC_DMCR_TPC_BIT) | (trwl << EMC_DMCR_TRWL_BIT) | (trc << EMC_DMCR_TRC_BIT));
|
|
+
|
|
+ REG_EMC_DMCR = dmcr;
|
|
+}
|
|
+
|
|
+static void jz_update_dram_prev(unsigned int cur_mclk, unsigned int new_mclk)
|
|
+{
|
|
+ /* No risk, no fun: run with interrupts on! */
|
|
+ if (new_mclk > cur_mclk) {
|
|
+ /* We're going FASTER, so first update TRAS, RCD, TPC, TRWL
|
|
+ * and TRC of DMCR before changing the frequency.
|
|
+ */
|
|
+ jz_update_dram_dmcr(new_mclk);
|
|
+ } else {
|
|
+ /* We're going SLOWER: first update RTCOR value
|
|
+ * before changing the frequency.
|
|
+ */
|
|
+ jz_update_dram_rtcor(new_mclk);
|
|
+ }
|
|
+}
|
|
+
|
|
+static void jz_update_dram_post(unsigned int cur_mclk, unsigned int new_mclk)
|
|
+{
|
|
+ /* No risk, no fun: run with interrupts on! */
|
|
+ if (new_mclk > cur_mclk) {
|
|
+ /* We're going FASTER, so update RTCOR
|
|
+ * after changing the frequency
|
|
+ */
|
|
+ jz_update_dram_rtcor(new_mclk);
|
|
+ } else {
|
|
+ /* We're going SLOWER: so update TRAS, RCD, TPC, TRWL
|
|
+ * and TRC of DMCR after changing the frequency.
|
|
+ */
|
|
+ jz_update_dram_dmcr(new_mclk);
|
|
+ }
|
|
+}
|
|
+
|
|
+static void jz_scale_divisors(struct dpm_regs *regs)
|
|
+{
|
|
+ unsigned int cpccr;
|
|
+ unsigned int cur_mclk, new_mclk;
|
|
+ int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
|
|
+ unsigned int tmp = 0, wait = PLL_WAIT_500NS;
|
|
+
|
|
+ cpccr = REG_CPM_CPCCR;
|
|
+ cpccr &= ~((unsigned long)regs->cpccr_mask);
|
|
+ cpccr |= regs->cpccr;
|
|
+ cpccr |= CPM_CPCCR_CE; /* update immediately */
|
|
+
|
|
+ cur_mclk = __cpm_get_mclk();
|
|
+ new_mclk = __cpm_get_pllout() / div[(cpccr & CPM_CPCCR_MDIV_MASK) >> CPM_CPCCR_MDIV_BIT];
|
|
+
|
|
+ /* Update some DRAM parameters before changing frequency */
|
|
+ jz_update_dram_prev(cur_mclk, new_mclk);
|
|
+
|
|
+ /* update register to change the clocks.
|
|
+ * align this code to a cache line.
|
|
+ */
|
|
+ __asm__ __volatile__(
|
|
+ ".set noreorder\n\t"
|
|
+ ".align 5\n"
|
|
+ "sw %1,0(%0)\n\t"
|
|
+ "li %3,0\n\t"
|
|
+ "1:\n\t"
|
|
+ "bne %3,%2,1b\n\t"
|
|
+ "addi %3, 1\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ ".set reorder\n\t"
|
|
+ :
|
|
+ : "r" (CPM_CPCCR), "r" (cpccr), "r" (wait), "r" (tmp));
|
|
+
|
|
+ /* Update some other DRAM parameters after changing frequency */
|
|
+ jz_update_dram_post(cur_mclk, new_mclk);
|
|
+}
|
|
+
|
|
+#ifdef CHANGE_PLL
|
|
+/* Maintain the LCD clock and pixel clock */
|
|
+static void jz_scale_lcd_divisors(struct dpm_regs *regs)
|
|
+{
|
|
+ unsigned int new_pll, new_lcd_div, new_lcdpix_div;
|
|
+ unsigned int cpccr;
|
|
+ unsigned int tmp = 0, wait = PLL_WAIT_500NS;
|
|
+
|
|
+ if (!boot_config.lcd_clks_initialized) return;
|
|
+
|
|
+ new_pll = __cpm_get_pllout();
|
|
+ new_lcd_div = new_pll / boot_config.lcd_clk;
|
|
+ new_lcdpix_div = new_pll / boot_config.lcdpix_clk;
|
|
+
|
|
+ if (new_lcd_div < 1)
|
|
+ new_lcd_div = 1;
|
|
+ if (new_lcd_div > 16)
|
|
+ new_lcd_div = 16;
|
|
+
|
|
+ if (new_lcdpix_div < 1)
|
|
+ new_lcdpix_div = 1;
|
|
+ if (new_lcdpix_div > 512)
|
|
+ new_lcdpix_div = 512;
|
|
+
|
|
+// REG_CPM_CPCCR2 = new_lcdpix_div - 1;
|
|
+
|
|
+ cpccr = REG_CPM_CPCCR;
|
|
+ cpccr &= ~CPM_CPCCR_LDIV_MASK;
|
|
+ cpccr |= ((new_lcd_div - 1) << CPM_CPCCR_LDIV_BIT);
|
|
+ cpccr |= CPM_CPCCR_CE; /* update immediately */
|
|
+
|
|
+ /* update register to change the clocks.
|
|
+ * align this code to a cache line.
|
|
+ */
|
|
+ __asm__ __volatile__(
|
|
+ ".set noreorder\n\t"
|
|
+ ".align 5\n"
|
|
+ "sw %1,0(%0)\n\t"
|
|
+ "li %3,0\n\t"
|
|
+ "1:\n\t"
|
|
+ "bne %3,%2,1b\n\t"
|
|
+ "addi %3, 1\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ ".set reorder\n\t"
|
|
+ :
|
|
+ : "r" (CPM_CPCCR), "r" (cpccr), "r" (wait), "r" (tmp));
|
|
+}
|
|
+
|
|
+static void jz_scale_pll(struct dpm_regs *regs)
|
|
+{
|
|
+ unsigned int cppcr;
|
|
+ unsigned int cur_mclk, new_mclk, new_pll;
|
|
+ int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
|
|
+ int od[] = {1, 2, 2, 4};
|
|
+
|
|
+ cppcr = REG_CPM_CPPCR;
|
|
+ cppcr &= ~(regs->cppcr_mask | CPM_CPPCR_PLLS | CPM_CPPCR_PLLEN | CPM_CPPCR_PLLST_MASK);
|
|
+ regs->cppcr &= ~CPM_CPPCR_PLLEN;
|
|
+ cppcr |= (regs->cppcr | 0xff);
|
|
+
|
|
+ /* Update some DRAM parameters before changing frequency */
|
|
+ new_pll = JZ_EXTAL * ((cppcr>>23)+2) / ((((cppcr>>18)&0x1f)+2) * od[(cppcr>>16)&0x03]);
|
|
+ cur_mclk = __cpm_get_mclk();
|
|
+ new_mclk = new_pll / div[(REG_CPM_CPCCR>>16) & 0xf];
|
|
+
|
|
+ /*
|
|
+ * Update some SDRAM parameters
|
|
+ */
|
|
+ jz_update_dram_prev(cur_mclk, new_mclk);
|
|
+
|
|
+ /*
|
|
+ * Update PLL, align code to cache line.
|
|
+ */
|
|
+ cppcr |= CPM_CPPCR_PLLEN;
|
|
+ __asm__ __volatile__(
|
|
+ ".set noreorder\n\t"
|
|
+ ".align 5\n"
|
|
+ "sw %1,0(%0)\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ ".set reorder\n\t"
|
|
+ :
|
|
+ : "r" (CPM_CPPCR), "r" (cppcr));
|
|
+
|
|
+ /* Update some other DRAM parameters after changing frequency */
|
|
+ jz_update_dram_post(cur_mclk, new_mclk);
|
|
+}
|
|
+#endif
|
|
+
|
|
+static void jz4750_transition(struct dpm_regs *regs)
|
|
+{
|
|
+ /*
|
|
+ * Get and save some boot-time conditions.
|
|
+ */
|
|
+ jz_init_boot_config();
|
|
+
|
|
+#ifdef CHANGE_PLL
|
|
+ /*
|
|
+ * Disable LCD before scaling pll.
|
|
+ * LCD and LCD pixel clocks should not be changed even if the PLL
|
|
+ * output frequency has been changed.
|
|
+ */
|
|
+ REG_LCD_CTRL &= ~LCD_CTRL_ENA;
|
|
+
|
|
+ /*
|
|
+ * Stop module clocks before scaling PLL
|
|
+ */
|
|
+ __cpm_stop_eth();
|
|
+ __cpm_stop_aic(1);
|
|
+ __cpm_stop_aic(2);
|
|
+#endif
|
|
+
|
|
+ /* ... add more as necessary */
|
|
+
|
|
+ if (regs->pll_up_flag == PLL_GOES_UP) {
|
|
+ /* the pll frequency is going up, so change dividors first */
|
|
+ jz_scale_divisors(regs);
|
|
+#ifdef CHANGE_PLL
|
|
+ jz_scale_pll(regs);
|
|
+#endif
|
|
+ }
|
|
+ else if (regs->pll_up_flag == PLL_GOES_DOWN) {
|
|
+ /* the pll frequency is going down, so change pll first */
|
|
+#ifdef CHANGE_PLL
|
|
+ jz_scale_pll(regs);
|
|
+#endif
|
|
+ jz_scale_divisors(regs);
|
|
+ }
|
|
+ else {
|
|
+ /* the pll frequency is unchanged, so change divisors only */
|
|
+ jz_scale_divisors(regs);
|
|
+ }
|
|
+
|
|
+#ifdef CHANGE_PLL
|
|
+ /*
|
|
+ * Restart module clocks before scaling PLL
|
|
+ */
|
|
+ __cpm_start_eth();
|
|
+ __cpm_start_aic(1);
|
|
+ __cpm_start_aic(2);
|
|
+
|
|
+ /* ... add more as necessary */
|
|
+
|
|
+ /* Scale the LCD divisors after scaling pll */
|
|
+ if (regs->pll_up_flag != PLL_UNCHANGED) {
|
|
+ jz_scale_lcd_divisors(regs);
|
|
+ }
|
|
+
|
|
+ /* Enable LCD controller */
|
|
+ REG_LCD_CTRL &= ~LCD_CTRL_DIS;
|
|
+ REG_LCD_CTRL |= LCD_CTRL_ENA;
|
|
+#endif
|
|
+
|
|
+ /* Update system clocks */
|
|
+ jz_update_clocks();
|
|
+}
|
|
+
|
|
+extern unsigned int idle_times;
|
|
+static unsigned int jz4750_freq_get(unsigned int cpu)
|
|
+{
|
|
+ return (__cpm_get_cclk() / 1000);
|
|
+}
|
|
+
|
|
+static unsigned int index_to_divisor(unsigned int index, struct dpm_regs *regs)
|
|
+{
|
|
+ int n2FR[33] = {
|
|
+ 0, 0, 1, 2, 3, 0, 4, 0, 5, 0, 0, 0, 6, 0, 0, 0,
|
|
+ 7, 0, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 0, 0,
|
|
+ 9
|
|
+ };
|
|
+ int div[4] = {1, 2, 2, 2}; /* divisors of I:S:P:M */
|
|
+ unsigned int div_of_cclk, new_freq, i;
|
|
+
|
|
+ regs->pll_up_flag = PLL_UNCHANGED;
|
|
+ regs->cpccr_mask = CPM_CPCCR_CDIV_MASK | CPM_CPCCR_HDIV_MASK | CPM_CPCCR_PDIV_MASK | CPM_CPCCR_MDIV_MASK;
|
|
+
|
|
+ new_freq = jz4750_freq_table.table[index].frequency;
|
|
+
|
|
+ do {
|
|
+ div_of_cclk = __cpm_get_pllout() / (1000 * new_freq);
|
|
+ } while (div_of_cclk==0);
|
|
+
|
|
+ if(div_of_cclk == 1 || div_of_cclk == 2 || div_of_cclk == 4) {
|
|
+ for(i = 1; i<4; i++) {
|
|
+ div[i] = 3;
|
|
+ }
|
|
+ } else {
|
|
+ for(i = 1; i<4; i++) {
|
|
+ div[i] = 2;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ for(i = 0; i<4; i++) {
|
|
+ div[i] *= div_of_cclk;
|
|
+ }
|
|
+
|
|
+ dprintk("divisors of I:S:P:M = %d:%d:%d:%d\n", div[0], div[1], div[2], div[3]);
|
|
+
|
|
+ regs->cpccr =
|
|
+ (n2FR[div[0]] << CPM_CPCCR_CDIV_BIT) |
|
|
+ (n2FR[div[1]] << CPM_CPCCR_HDIV_BIT) |
|
|
+ (n2FR[div[2]] << CPM_CPCCR_PDIV_BIT) |
|
|
+ (n2FR[div[3]] << CPM_CPCCR_MDIV_BIT);
|
|
+
|
|
+ return div_of_cclk;
|
|
+}
|
|
+
|
|
+static void jz4750_set_cpu_divider_index(unsigned int cpu, unsigned int index)
|
|
+{
|
|
+ unsigned long divisor, old_divisor;
|
|
+ struct cpufreq_freqs freqs;
|
|
+ struct dpm_regs regs;
|
|
+
|
|
+ old_divisor = __cpm_get_pllout() / __cpm_get_cclk();
|
|
+ divisor = index_to_divisor(index, ®s);
|
|
+
|
|
+ freqs.old = __cpm_get_cclk() / 1000;
|
|
+ freqs.new = __cpm_get_pllout() / (1000 * divisor);
|
|
+ freqs.cpu = cpu;
|
|
+
|
|
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
|
|
+
|
|
+ if (old_divisor != divisor)
|
|
+ jz4750_transition(®s);
|
|
+
|
|
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
|
|
+}
|
|
+
|
|
+static int jz4750_freq_target(struct cpufreq_policy *policy,
|
|
+ unsigned int target_freq,
|
|
+ unsigned int relation)
|
|
+{
|
|
+ unsigned int new_index = 0;
|
|
+
|
|
+ if (cpufreq_frequency_table_target(policy,
|
|
+ &jz4750_freq_table.table[0],
|
|
+ target_freq, relation, &new_index))
|
|
+ return -EINVAL;
|
|
+
|
|
+ jz4750_set_cpu_divider_index(policy->cpu, new_index);
|
|
+
|
|
+ dprintk("new frequency is %d KHz (REG_CPM_CPCCR:0x%x)\n", __cpm_get_cclk() / 1000, REG_CPM_CPCCR);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int jz4750_freq_verify(struct cpufreq_policy *policy)
|
|
+{
|
|
+ return cpufreq_frequency_table_verify(policy,
|
|
+ &jz4750_freq_table.table[0]);
|
|
+}
|
|
+
|
|
+static int __init jz4750_cpufreq_driver_init(struct cpufreq_policy *policy)
|
|
+{
|
|
+
|
|
+ struct cpufreq_frequency_table *table = &jz4750_freq_table.table[0];
|
|
+ unsigned int MAX_FREQ;
|
|
+
|
|
+ dprintk(KERN_INFO "Jz4750 cpufreq driver\n");
|
|
+
|
|
+ if (policy->cpu != 0)
|
|
+ return -EINVAL;
|
|
+
|
|
+ policy->cur = MAX_FREQ = __cpm_get_cclk() / 1000; /* in kHz. Current and max frequency is determined by u-boot */
|
|
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
|
|
+
|
|
+ policy->cpuinfo.min_freq = MAX_FREQ/8;
|
|
+ policy->cpuinfo.max_freq = MAX_FREQ;
|
|
+ policy->cpuinfo.transition_latency = 100000; /* in 10^(-9) s = nanoseconds */
|
|
+
|
|
+ table[0].index = 0;
|
|
+ table[0].frequency = MAX_FREQ/8;
|
|
+ table[1].index = 1;
|
|
+ table[1].frequency = MAX_FREQ/6;
|
|
+ table[2].index = 2;
|
|
+ table[2].frequency = MAX_FREQ/4;
|
|
+ table[3].index = 3;
|
|
+ table[3].frequency = MAX_FREQ/3;
|
|
+ table[4].index = 4;
|
|
+ table[4].frequency = MAX_FREQ/2;
|
|
+ table[5].index = 5;
|
|
+ table[5].frequency = MAX_FREQ;
|
|
+ table[6].index = 6;
|
|
+ table[6].frequency = CPUFREQ_TABLE_END;
|
|
+
|
|
+#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
|
|
+ cpufreq_frequency_table_get_attr(table, policy->cpu); /* for showing /sys/devices/system/cpu/cpuX/cpufreq/stats/ */
|
|
+#endif
|
|
+
|
|
+ return cpufreq_frequency_table_cpuinfo(policy, table);
|
|
+}
|
|
+
|
|
+static struct cpufreq_driver cpufreq_jz4750_driver = {
|
|
+// .flags = CPUFREQ_STICKY,
|
|
+ .init = jz4750_cpufreq_driver_init,
|
|
+ .verify = jz4750_freq_verify,
|
|
+ .target = jz4750_freq_target,
|
|
+ .get = jz4750_freq_get,
|
|
+ .name = "jz4750",
|
|
+};
|
|
+
|
|
+static int __init jz4750_cpufreq_init(void)
|
|
+{
|
|
+ return cpufreq_register_driver(&cpufreq_jz4750_driver);
|
|
+}
|
|
+
|
|
+static void __exit jz4750_cpufreq_exit(void)
|
|
+{
|
|
+ cpufreq_unregister_driver(&cpufreq_jz4750_driver);
|
|
+}
|
|
+
|
|
+module_init(jz4750_cpufreq_init);
|
|
+module_exit(jz4750_cpufreq_exit);
|
|
+
|
|
+MODULE_AUTHOR("Regen <lhhuang@ingenic.cn>");
|
|
+MODULE_DESCRIPTION("cpufreq driver for Jz4750");
|
|
+MODULE_LICENSE("GPL");
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750/dma.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750/dma.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,836 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4750/dma.c
|
|
+ *
|
|
+ * Support functions for the JZ4750 internal DMA channels.
|
|
+ * No-descriptor transfer only.
|
|
+ * Descriptor transfer should also call jz_request_dma() to get a free
|
|
+ * channel and call jz_free_dma() to free the channel. And driver should
|
|
+ * build the DMA descriptor and setup the DMA channel by itself.
|
|
+ *
|
|
+ * Copyright (C) 2006 - 2008 Ingenic Semiconductor Inc.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License as published by the
|
|
+ * Free Software Foundation; either version 2 of the License, or (at your
|
|
+ * option) any later version.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/errno.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/spinlock.h>
|
|
+#include <linux/string.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/soundcard.h>
|
|
+
|
|
+#include <asm/system.h>
|
|
+#include <asm/addrspace.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+/*
|
|
+ * A note on resource allocation:
|
|
+ *
|
|
+ * All drivers needing DMA channels, should allocate and release them
|
|
+ * through the public routines `jz_request_dma()' and `jz_free_dma()'.
|
|
+ *
|
|
+ * In order to avoid problems, all processes should allocate resources in
|
|
+ * the same sequence and release them in the reverse order.
|
|
+ *
|
|
+ * So, when allocating DMAs and IRQs, first allocate the DMA, then the IRQ.
|
|
+ * When releasing them, first release the IRQ, then release the DMA. The
|
|
+ * main reason for this order is that, if you are requesting the DMA buffer
|
|
+ * done interrupt, you won't know the irq number until the DMA channel is
|
|
+ * returned from jz_request_dma().
|
|
+ */
|
|
+
|
|
+struct jz_dma_chan jz_dma_table[MAX_DMA_NUM] = {
|
|
+ {dev_id:DMA_ID_BCH_ENC,}, /* DMAC0 channel 0, reserved for BCH */
|
|
+ {dev_id:-1,}, /* DMAC0 channel 1 */
|
|
+ {dev_id:-1,}, /* DMAC0 channel 2 */
|
|
+ {dev_id:-1,}, /* DMAC0 channel 3 */
|
|
+ {dev_id:-1,}, /* DMAC0 channel 4 */
|
|
+ {dev_id:-1,}, /* DMAC0 channel 5 */
|
|
+ {dev_id:-1,}, /* DMAC1 channel 0 */
|
|
+ {dev_id:-1,}, /* DMAC1 channel 1 */
|
|
+ {dev_id:-1,}, /* DMAC1 channel 2 */
|
|
+ {dev_id:-1,}, /* DMAC1 channel 3 */
|
|
+ {dev_id:-1,}, /* DMAC1 channel 4 */
|
|
+ {dev_id:-1,}, /* DMAC1 channel 5 */
|
|
+};
|
|
+
|
|
+// Device FIFO addresses and default DMA modes
|
|
+static const struct {
|
|
+ unsigned int fifo_addr;
|
|
+ unsigned int dma_mode;
|
|
+ unsigned int dma_source;
|
|
+} dma_dev_table[DMA_ID_MAX] = {
|
|
+ {0, DMA_AUTOINIT, DMAC_DRSR_RS_EXT}, /* External request with DREQn */
|
|
+ {0x18000000, DMA_AUTOINIT, DMAC_DRSR_RS_NAND}, /* NAND request */
|
|
+ {CPHYSADDR(BCH_DR), DMA_8BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_BCH_ENC},
|
|
+ {CPHYSADDR(BCH_DR), DMA_8BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_BCH_DEC},
|
|
+ {0, DMA_AUTOINIT, DMAC_DRSR_RS_AUTO},
|
|
+// {CPHYSADDR(TSSI_FIFO), DMA_32BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_TSSIIN},
|
|
+ {CPHYSADDR(UART3_TDR), DMA_8BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_UART3OUT},
|
|
+ {CPHYSADDR(UART3_RDR), DMA_8BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_UART3IN},
|
|
+ {CPHYSADDR(UART2_TDR), DMA_8BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_UART2OUT},
|
|
+ {CPHYSADDR(UART2_RDR), DMA_8BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_UART2IN},
|
|
+ {CPHYSADDR(UART1_TDR), DMA_8BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_UART1OUT},
|
|
+ {CPHYSADDR(UART1_RDR), DMA_8BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_UART1IN},
|
|
+ {CPHYSADDR(UART0_TDR), DMA_8BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_UART0OUT},
|
|
+ {CPHYSADDR(UART0_RDR), DMA_8BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_UART0IN},
|
|
+ {CPHYSADDR(SSI_DR(0)), DMA_32BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_SSI0OUT},
|
|
+ {CPHYSADDR(SSI_DR(0)), DMA_32BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_SSI0IN},
|
|
+ {CPHYSADDR(AIC_DR), DMA_32BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_AICOUT},
|
|
+ {CPHYSADDR(AIC_DR), DMA_32BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_AICIN},
|
|
+ {CPHYSADDR(MSC_TXFIFO(0)), DMA_32BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_MSC0OUT},
|
|
+ {CPHYSADDR(MSC_RXFIFO(0)), DMA_32BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_MSC0IN},
|
|
+ {0, DMA_AUTOINIT, DMAC_DRSR_RS_TCU},
|
|
+ {SADC_TSDAT, DMA_32BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_SADC},/* Touch Screen Data Register */
|
|
+ {CPHYSADDR(MSC_TXFIFO(1)), DMA_32BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_MSC1OUT}, /* SSC1 TX */
|
|
+ {CPHYSADDR(MSC_RXFIFO(1)), DMA_32BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_MSC1IN}, /* SSC1 RX */
|
|
+ {CPHYSADDR(SSI_DR(1)), DMA_32BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_SSI1OUT},
|
|
+ {CPHYSADDR(SSI_DR(1)), DMA_32BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_SSI1IN},
|
|
+ {CPHYSADDR(PCM_DP), DMA_16BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_PMOUT},
|
|
+ {CPHYSADDR(PCM_DP), DMA_16BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_PMIN},
|
|
+ {},
|
|
+};
|
|
+
|
|
+
|
|
+int jz_dma_read_proc(char *buf, char **start, off_t fpos,
|
|
+ int length, int *eof, void *data)
|
|
+{
|
|
+ int i, len = 0;
|
|
+ struct jz_dma_chan *chan;
|
|
+
|
|
+ for (i = 0; i < MAX_DMA_NUM; i++) {
|
|
+ if ((chan = get_dma_chan(i)) != NULL) {
|
|
+ len += sprintf(buf + len, "%2d: %s\n",
|
|
+ i, chan->dev_str);
|
|
+ }
|
|
+ }
|
|
+
|
|
+ if (fpos >= len) {
|
|
+ *start = buf;
|
|
+ *eof = 1;
|
|
+ return 0;
|
|
+ }
|
|
+ *start = buf + fpos;
|
|
+ if ((len -= fpos) > length)
|
|
+ return length;
|
|
+ *eof = 1;
|
|
+ return len;
|
|
+}
|
|
+
|
|
+
|
|
+void dump_jz_dma_channel(unsigned int dmanr)
|
|
+{
|
|
+ struct jz_dma_chan *chan;
|
|
+
|
|
+ if (dmanr > MAX_DMA_NUM)
|
|
+ return;
|
|
+ chan = &jz_dma_table[dmanr];
|
|
+
|
|
+ printk("DMA%d Registers:\n", dmanr);
|
|
+ printk(" DMACR = 0x%08x\n", REG_DMAC_DMACR(chan->io/HALF_DMA_NUM));
|
|
+ printk(" DSAR = 0x%08x\n", REG_DMAC_DSAR(dmanr));
|
|
+ printk(" DTAR = 0x%08x\n", REG_DMAC_DTAR(dmanr));
|
|
+ printk(" DTCR = 0x%08x\n", REG_DMAC_DTCR(dmanr));
|
|
+ printk(" DRSR = 0x%08x\n", REG_DMAC_DRSR(dmanr));
|
|
+ printk(" DCCSR = 0x%08x\n", REG_DMAC_DCCSR(dmanr));
|
|
+ printk(" DCMD = 0x%08x\n", REG_DMAC_DCMD(dmanr));
|
|
+ printk(" DDA = 0x%08x\n", REG_DMAC_DDA(dmanr));
|
|
+ printk(" DMADBR = 0x%08x\n", REG_DMAC_DMADBR(chan->io/HALF_DMA_NUM));
|
|
+}
|
|
+
|
|
+
|
|
+/**
|
|
+ * jz_request_dma - dynamically allcate an idle DMA channel to return
|
|
+ * @dev_id: the specified dma device id or DMA_ID_RAW_SET
|
|
+ * @dev_str: the specified dma device string name
|
|
+ * @irqhandler: the irq handler, or NULL
|
|
+ * @irqflags: the irq handler flags
|
|
+ * @irq_dev_id: the irq handler device id for shared irq
|
|
+ *
|
|
+ * Finds a free channel, and binds the requested device to it.
|
|
+ * Returns the allocated channel number, or negative on error.
|
|
+ * Requests the DMA done IRQ if irqhandler != NULL.
|
|
+ *
|
|
+*/
|
|
+/*int jz_request_dma(int dev_id, const char *dev_str,
|
|
+ void (*irqhandler)(int, void *, struct pt_regs *),
|
|
+ unsigned long irqflags,
|
|
+ void *irq_dev_id)
|
|
+*/
|
|
+
|
|
+int jz_request_dma(int dev_id, const char *dev_str,
|
|
+ irqreturn_t (*irqhandler)(int, void *),
|
|
+ unsigned long irqflags,
|
|
+ void *irq_dev_id)
|
|
+{
|
|
+ struct jz_dma_chan *chan;
|
|
+ int i, ret, chan0;
|
|
+
|
|
+ if (dev_id < 0 || dev_id >= DMA_ID_MAX)
|
|
+ return -EINVAL;
|
|
+
|
|
+ /* Because of a bug in DMA controller of jz4750, which causes auto
|
|
+ request and device request can't be allocated in a same DMA
|
|
+ controller, all device requests should be put in the second DMA
|
|
+ controller
|
|
+ */
|
|
+ if (dev_id > DMA_ID_AUTO)
|
|
+ chan0 = 6;
|
|
+ else
|
|
+ chan0 = 0;
|
|
+
|
|
+ for (i = chan0; i < MAX_DMA_NUM; i++) {
|
|
+ if (jz_dma_table[i].dev_id < 0)
|
|
+ break;
|
|
+ }
|
|
+ if (i == MAX_DMA_NUM) /* no free channel */
|
|
+ return -ENODEV;
|
|
+
|
|
+ /* we got a free channel */
|
|
+ chan = &jz_dma_table[i];
|
|
+
|
|
+ if (irqhandler) {
|
|
+ chan->irq = IRQ_DMA_0 + i; // allocate irq number
|
|
+ chan->irq_dev = irq_dev_id;
|
|
+ if ((ret = request_irq(chan->irq, irqhandler, irqflags,
|
|
+ dev_str, chan->irq_dev))) {
|
|
+ chan->irq = -1;
|
|
+ chan->irq_dev = NULL;
|
|
+ return ret;
|
|
+ }
|
|
+ } else {
|
|
+ chan->irq = -1;
|
|
+ chan->irq_dev = NULL;
|
|
+ }
|
|
+
|
|
+ // fill it in
|
|
+ chan->io = i;
|
|
+ chan->dev_id = dev_id;
|
|
+ chan->dev_str = dev_str;
|
|
+ chan->fifo_addr = dma_dev_table[dev_id].fifo_addr;
|
|
+ chan->mode = dma_dev_table[dev_id].dma_mode;
|
|
+ chan->source = dma_dev_table[dev_id].dma_source;
|
|
+
|
|
+ if (i < 6)
|
|
+ REG_DMAC_DMACKE(0) = 1 << i;
|
|
+ else
|
|
+ REG_DMAC_DMACKE(1) = 1 << (i - 6);
|
|
+
|
|
+ return i;
|
|
+}
|
|
+
|
|
+void jz_free_dma(unsigned int dmanr)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan) {
|
|
+ printk("Trying to free DMA%d\n", dmanr);
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ disable_dma(dmanr);
|
|
+ if (chan->irq)
|
|
+ free_irq(chan->irq, chan->irq_dev);
|
|
+
|
|
+ chan->irq = -1;
|
|
+ chan->irq_dev = NULL;
|
|
+ chan->dev_id = -1;
|
|
+}
|
|
+
|
|
+void jz_set_dma_dest_width(int dmanr, int nbit)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ chan->mode &= ~DMAC_DCMD_DWDH_MASK;
|
|
+ switch (nbit) {
|
|
+ case 8:
|
|
+ chan->mode |= DMAC_DCMD_DWDH_8;
|
|
+ break;
|
|
+ case 16:
|
|
+ chan->mode |= DMAC_DCMD_DWDH_16;
|
|
+ break;
|
|
+ case 32:
|
|
+ chan->mode |= DMAC_DCMD_DWDH_32;
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+void jz_set_dma_src_width(int dmanr, int nbit)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ chan->mode &= ~DMAC_DCMD_SWDH_MASK;
|
|
+ switch (nbit) {
|
|
+ case 8:
|
|
+ chan->mode |= DMAC_DCMD_SWDH_8;
|
|
+ break;
|
|
+ case 16:
|
|
+ chan->mode |= DMAC_DCMD_SWDH_16;
|
|
+ break;
|
|
+ case 32:
|
|
+ chan->mode |= DMAC_DCMD_SWDH_32;
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+void jz_set_dma_block_size(int dmanr, int nbyte)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ chan->mode &= ~DMAC_DCMD_DS_MASK;
|
|
+ switch (nbyte) {
|
|
+ case 1:
|
|
+ chan->mode |= DMAC_DCMD_DS_8BIT;
|
|
+ break;
|
|
+ case 2:
|
|
+ chan->mode |= DMAC_DCMD_DS_16BIT;
|
|
+ break;
|
|
+ case 4:
|
|
+ chan->mode |= DMAC_DCMD_DS_32BIT;
|
|
+ break;
|
|
+ case 16:
|
|
+ chan->mode |= DMAC_DCMD_DS_16BYTE;
|
|
+ break;
|
|
+ case 32:
|
|
+ chan->mode |= DMAC_DCMD_DS_32BYTE;
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+unsigned int jz_get_dma_command(int dmanr)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+ return chan->mode;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * jz_set_dma_mode - do the raw settings for the specified DMA channel
|
|
+ * @dmanr: the specified DMA channel
|
|
+ * @mode: dma operate mode, DMA_MODE_READ or DMA_MODE_WRITE
|
|
+ * @dma_mode: dma raw mode
|
|
+ * @dma_source: dma raw request source
|
|
+ * @fifo_addr: dma raw device fifo address
|
|
+ *
|
|
+ * Ensure call jz_request_dma(DMA_ID_RAW_SET, ...) first, then call
|
|
+ * jz_set_dma_mode() rather than set_dma_mode() if you work with
|
|
+ * and external request dma device.
|
|
+ *
|
|
+ * NOTE: Don not dynamically allocate dma channel if one external request
|
|
+ * dma device will occupy this channel.
|
|
+*/
|
|
+int jz_set_dma_mode(unsigned int dmanr, unsigned int mode,
|
|
+ unsigned int dma_mode, unsigned int dma_source,
|
|
+ unsigned int fifo_addr)
|
|
+{
|
|
+ int dev_id, i;
|
|
+ struct jz_dma_chan *chan;
|
|
+
|
|
+ if (dmanr > MAX_DMA_NUM)
|
|
+ return -ENODEV;
|
|
+ for (i = 0; i < MAX_DMA_NUM; i++) {
|
|
+ if (jz_dma_table[i].dev_id < 0)
|
|
+ break;
|
|
+ }
|
|
+ if (i == MAX_DMA_NUM)
|
|
+ return -ENODEV;
|
|
+
|
|
+ chan = &jz_dma_table[dmanr];
|
|
+ dev_id = chan->dev_id;
|
|
+ if (dev_id > 0) {
|
|
+ printk(KERN_DEBUG "%s sets the allocated DMA channel %d!\n",
|
|
+ __FUNCTION__, dmanr);
|
|
+ return -ENODEV;
|
|
+ }
|
|
+
|
|
+ /* clone it from the dynamically allocated. */
|
|
+ if (i != dmanr) {
|
|
+ chan->irq = jz_dma_table[i].irq;
|
|
+ chan->irq_dev = jz_dma_table[i].irq_dev;
|
|
+ chan->dev_str = jz_dma_table[i].dev_str;
|
|
+ jz_dma_table[i].irq = 0;
|
|
+ jz_dma_table[i].irq_dev = NULL;
|
|
+ jz_dma_table[i].dev_id = -1;
|
|
+ }
|
|
+ chan->dev_id = DMA_ID_RAW_SET;
|
|
+ chan->io = dmanr;
|
|
+ chan->fifo_addr = fifo_addr;
|
|
+ chan->mode = dma_mode;
|
|
+ chan->source = dma_source;
|
|
+
|
|
+ set_dma_mode(dmanr, dma_mode);
|
|
+
|
|
+ return dmanr;
|
|
+}
|
|
+
|
|
+void enable_dma(unsigned int dmanr)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ REG_DMAC_DCCSR(dmanr) &= ~(DMAC_DCCSR_HLT | DMAC_DCCSR_TT | DMAC_DCCSR_AR);
|
|
+ REG_DMAC_DCCSR(dmanr) |= DMAC_DCCSR_NDES; /* No-descriptor transfer */
|
|
+ __dmac_enable_channel(dmanr);
|
|
+ if (chan->irq)
|
|
+ __dmac_channel_enable_irq(dmanr);
|
|
+}
|
|
+
|
|
+#define DMA_DISABLE_POLL 0x10000
|
|
+
|
|
+void disable_dma(unsigned int dmanr)
|
|
+{
|
|
+ int i;
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ if (!__dmac_channel_enabled(dmanr))
|
|
+ return;
|
|
+
|
|
+ for (i = 0; i < DMA_DISABLE_POLL; i++)
|
|
+ if (__dmac_channel_transmit_end_detected(dmanr))
|
|
+ break;
|
|
+#if 0
|
|
+ if (i == DMA_DISABLE_POLL)
|
|
+ printk(KERN_INFO "disable_dma: poll expired!\n");
|
|
+#endif
|
|
+
|
|
+ __dmac_disable_channel(dmanr);
|
|
+ if (chan->irq)
|
|
+ __dmac_channel_disable_irq(dmanr);
|
|
+}
|
|
+
|
|
+/* Note: DMA_MODE_MASK is simulated by sw */
|
|
+void set_dma_mode(unsigned int dmanr, unsigned int mode)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ chan->mode |= mode & ~(DMAC_DCMD_SAI | DMAC_DCMD_DAI);
|
|
+ mode &= DMA_MODE_MASK;
|
|
+ if (mode == DMA_MODE_READ) {
|
|
+ chan->mode |= DMAC_DCMD_DAI;
|
|
+ chan->mode &= ~DMAC_DCMD_SAI;
|
|
+ } else if (mode == DMA_MODE_WRITE) {
|
|
+ chan->mode |= DMAC_DCMD_SAI;
|
|
+ chan->mode &= ~DMAC_DCMD_DAI;
|
|
+ } else {
|
|
+ printk(KERN_DEBUG "set_dma_mode() just supports DMA_MODE_READ or DMA_MODE_WRITE!\n");
|
|
+ }
|
|
+ REG_DMAC_DCMD(chan->io) = chan->mode & ~DMA_MODE_MASK;
|
|
+ REG_DMAC_DRSR(chan->io) = chan->source;
|
|
+}
|
|
+
|
|
+void set_dma_addr(unsigned int dmanr, unsigned int phyaddr)
|
|
+{
|
|
+ unsigned int mode;
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ mode = chan->mode & DMA_MODE_MASK;
|
|
+ if (mode == DMA_MODE_READ) {
|
|
+ REG_DMAC_DSAR(chan->io) = chan->fifo_addr;
|
|
+ REG_DMAC_DTAR(chan->io) = phyaddr;
|
|
+ } else if (mode == DMA_MODE_WRITE) {
|
|
+ REG_DMAC_DSAR(chan->io) = phyaddr;
|
|
+ REG_DMAC_DTAR(chan->io) = chan->fifo_addr;
|
|
+ } else
|
|
+ printk(KERN_DEBUG "Driver should call set_dma_mode() ahead set_dma_addr()!\n");
|
|
+}
|
|
+
|
|
+void set_dma_count(unsigned int dmanr, unsigned int bytecnt)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+ int dma_ds[] = {4, 1, 2, 16, 32};
|
|
+ unsigned int ds;
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ ds = (chan->mode & DMAC_DCMD_DS_MASK) >> DMAC_DCMD_DS_BIT;
|
|
+ REG_DMAC_DTCR(chan->io) = bytecnt / dma_ds[ds]; // transfer count
|
|
+}
|
|
+
|
|
+unsigned int get_dma_residue(unsigned int dmanr)
|
|
+{
|
|
+ unsigned int count, ds;
|
|
+ int dma_ds[] = {4, 1, 2, 16, 32};
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+ if (!chan)
|
|
+ return 0;
|
|
+
|
|
+ ds = (chan->mode & DMAC_DCMD_DS_MASK) >> DMAC_DCMD_DS_BIT;
|
|
+ count = REG_DMAC_DTCR(chan->io);
|
|
+ count = count * dma_ds[ds];
|
|
+
|
|
+ return count;
|
|
+}
|
|
+
|
|
+void jz_set_oss_dma(unsigned int dmanr, unsigned int mode, unsigned int audio_fmt)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ switch (audio_fmt) {
|
|
+ case AFMT_U8:
|
|
+ /* burst mode : 32BIT */
|
|
+ break;
|
|
+ case AFMT_S16_LE:
|
|
+ /* burst mode : 16BYTE */
|
|
+ if (mode == DMA_MODE_READ) {
|
|
+ chan->mode = DMA_AIC_32_16BYTE_RX_CMD | DMA_MODE_READ;
|
|
+ chan->mode |= mode & ~(DMAC_DCMD_SAI | DMAC_DCMD_DAI);
|
|
+ mode &= DMA_MODE_MASK;
|
|
+ chan->mode |= DMAC_DCMD_DAI;
|
|
+ chan->mode &= ~DMAC_DCMD_SAI;
|
|
+ } else if (mode == DMA_MODE_WRITE) {
|
|
+ chan->mode = DMA_AIC_32_16BYTE_TX_CMD | DMA_MODE_WRITE;
|
|
+ //chan->mode = DMA_AIC_16BYTE_TX_CMD | DMA_MODE_WRITE;
|
|
+ chan->mode |= mode & ~(DMAC_DCMD_SAI | DMAC_DCMD_DAI);
|
|
+ mode &= DMA_MODE_MASK;
|
|
+ chan->mode |= DMAC_DCMD_SAI;
|
|
+ chan->mode &= ~DMAC_DCMD_DAI;
|
|
+ } else
|
|
+ printk("oss_dma_burst_mode() just supports DMA_MODE_READ or DMA_MODE_WRITE!\n");
|
|
+
|
|
+ REG_DMAC_DCMD(chan->io) = chan->mode & ~DMA_MODE_MASK;
|
|
+ REG_DMAC_DRSR(chan->io) = chan->source;
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+void jz_set_alsa_dma(unsigned int dmanr, unsigned int mode, unsigned int audio_fmt)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ switch (audio_fmt) {
|
|
+ case 8:
|
|
+ /* SNDRV_PCM_FORMAT_S8 burst mode : 32BIT */
|
|
+ break;
|
|
+ case 16:
|
|
+ /* SNDRV_PCM_FORMAT_S16_LE burst mode : 16BYTE */
|
|
+ if (mode == DMA_MODE_READ) {
|
|
+ chan->mode = DMA_AIC_16BYTE_RX_CMD | DMA_MODE_READ;
|
|
+ chan->mode |= mode & ~(DMAC_DCMD_SAI | DMAC_DCMD_DAI);
|
|
+ mode &= DMA_MODE_MASK;
|
|
+ chan->mode |= DMAC_DCMD_DAI;
|
|
+ chan->mode &= ~DMAC_DCMD_SAI;
|
|
+ } else if (mode == DMA_MODE_WRITE) {
|
|
+ chan->mode = DMA_AIC_16BYTE_TX_CMD | DMA_MODE_WRITE;
|
|
+ chan->mode |= mode & ~(DMAC_DCMD_SAI | DMAC_DCMD_DAI);
|
|
+ mode &= DMA_MODE_MASK;
|
|
+ chan->mode |= DMAC_DCMD_SAI;
|
|
+ chan->mode &= ~DMAC_DCMD_DAI;
|
|
+ } else
|
|
+ printk("alsa_dma_burst_mode() just supports DMA_MODE_READ or DMA_MODE_WRITE!\n");
|
|
+
|
|
+ REG_DMAC_DCMD(chan->io) = chan->mode & ~DMA_MODE_MASK;
|
|
+ REG_DMAC_DRSR(chan->io) = chan->source;
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+//#define JZ4750_DMAC_TEST_ENABLE
|
|
+#undef JZ4750_DMAC_TEST_ENABLE
|
|
+
|
|
+#ifdef JZ4750_DMAC_TEST_ENABLE
|
|
+
|
|
+/*
|
|
+ * DMA test: external address <--> external address
|
|
+ */
|
|
+#define TEST_DMA_SIZE 16*1024
|
|
+
|
|
+static jz_dma_desc *dma_desc;
|
|
+
|
|
+static int dma_chan;
|
|
+static dma_addr_t dma_desc_phys_addr;
|
|
+static unsigned int dma_src_addr, dma_src_phys_addr, dma_dst_addr, dma_dst_phys_addr;
|
|
+
|
|
+static int dma_check_result(void *src, void *dst, int size)
|
|
+{
|
|
+ unsigned int addr1, addr2, i, err = 0;
|
|
+
|
|
+ addr1 = (unsigned int)src;
|
|
+ addr2 = (unsigned int)dst;
|
|
+
|
|
+ for (i = 0; i < size; i += 4) {
|
|
+ if (*(volatile unsigned int *)addr1 != *(volatile unsigned int *)addr2) {
|
|
+ err++;
|
|
+ printk("wrong data at 0x%08x: src 0x%08x dst 0x%08x\n", addr2, *(volatile unsigned int *)addr1, *(volatile unsigned int *)addr2);
|
|
+ }
|
|
+ addr1 += 4;
|
|
+ addr2 += 4;
|
|
+ }
|
|
+ printk("check DMA result err=%d\n", err);
|
|
+ return err;
|
|
+}
|
|
+
|
|
+static irqreturn_t jz4750_dma_irq(int irq, void *dev_id)
|
|
+{
|
|
+ printk("jz4750_dma_irq %d\n", irq);
|
|
+
|
|
+
|
|
+ if (__dmac_channel_transmit_halt_detected(dma_chan)) {
|
|
+ printk("DMA HALT\n");
|
|
+ REG_DMAC_DCCSR(dma_chan) &= ~DMAC_DCCSR_EN; /* disable DMA */
|
|
+ __dmac_channel_clear_transmit_halt(dma_chan);
|
|
+ }
|
|
+
|
|
+ if (__dmac_channel_address_error_detected(dma_chan)) {
|
|
+ printk("DMA ADDR ERROR\n");
|
|
+ REG_DMAC_DCCSR(dma_chan) &= ~DMAC_DCCSR_EN; /* disable DMA */
|
|
+ REG_DMAC_DSAR(dma_chan) = 0; /* clear source address register */
|
|
+ REG_DMAC_DTAR(dma_chan) = 0; /* clear target address register */
|
|
+ __dmac_channel_clear_address_error(dma_chan);
|
|
+ }
|
|
+
|
|
+ if (__dmac_channel_descriptor_invalid_detected(dma_chan)) {
|
|
+ REG_DMAC_DCCSR(dma_chan) &= ~DMAC_DCCSR_EN; /* disable DMA */
|
|
+ printk("DMA DESC INVALID\n");
|
|
+ __dmac_channel_clear_descriptor_invalid(dma_chan);
|
|
+ }
|
|
+
|
|
+ if (__dmac_channel_count_terminated_detected(dma_chan)) {
|
|
+ printk("DMA CT\n");
|
|
+ __dmac_channel_clear_count_terminated(dma_chan);
|
|
+ }
|
|
+
|
|
+ if (__dmac_channel_transmit_end_detected(dma_chan)) {
|
|
+ REG_DMAC_DCCSR(dma_chan) &= ~DMAC_DCCSR_EN; /* disable DMA */
|
|
+ printk("DMA TT\n");
|
|
+ __dmac_channel_clear_transmit_end(dma_chan);
|
|
+ dump_jz_dma_channel(dma_chan);
|
|
+ dma_check_result((void *)dma_src_addr, (void *)dma_dst_addr, TEST_DMA_SIZE);
|
|
+ }
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+void dma_nodesc_test(void)
|
|
+{
|
|
+ unsigned int addr, i;
|
|
+
|
|
+ printk("dma_nodesc_test\n");
|
|
+
|
|
+ /* Request DMA channel and setup irq handler */
|
|
+ dma_chan = jz_request_dma(DMA_ID_AUTO, "auto", jz4750_dma_irq,
|
|
+ IRQF_DISABLED, NULL);
|
|
+ if (dma_chan < 0) {
|
|
+ printk("Setup irq failed\n");
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ printk("Requested DMA channel = %d\n", dma_chan);
|
|
+
|
|
+ /* Allocate DMA buffers */
|
|
+ dma_src_addr = __get_free_pages(GFP_KERNEL, 2); /* 16KB */
|
|
+ dma_dst_addr = __get_free_pages(GFP_KERNEL, 2); /* 16KB */
|
|
+
|
|
+ dma_src_phys_addr = CPHYSADDR(dma_src_addr);
|
|
+ dma_dst_phys_addr = CPHYSADDR(dma_dst_addr);
|
|
+
|
|
+ printk("Buffer addresses: 0x%08x 0x%08x 0x%08x 0x%08x\n",
|
|
+ dma_src_addr, dma_src_phys_addr, dma_dst_addr, dma_dst_phys_addr);
|
|
+
|
|
+ /* Prepare data for source buffer */
|
|
+ addr = (unsigned int)dma_src_addr;
|
|
+ for (i = 0; i < TEST_DMA_SIZE; i += 4) {
|
|
+ *(volatile unsigned int *)addr = addr;
|
|
+ addr += 4;
|
|
+ }
|
|
+ dma_cache_wback((unsigned long)dma_src_addr, TEST_DMA_SIZE);
|
|
+
|
|
+ /* Init target buffer */
|
|
+ memset((void *)dma_dst_addr, 0, TEST_DMA_SIZE);
|
|
+ dma_cache_wback((unsigned long)dma_dst_addr, TEST_DMA_SIZE);
|
|
+
|
|
+ /* Init DMA module */
|
|
+ printk("Starting DMA\n");
|
|
+ REG_DMAC_DMACR(dma_chan/HALF_DMA_NUM) = 0;
|
|
+ REG_DMAC_DCCSR(dma_chan) = 0;
|
|
+ REG_DMAC_DRSR(dma_chan) = DMAC_DRSR_RS_AUTO;
|
|
+ REG_DMAC_DSAR(dma_chan) = dma_src_phys_addr;
|
|
+ REG_DMAC_DTAR(dma_chan) = dma_dst_phys_addr;
|
|
+ REG_DMAC_DTCR(dma_chan) = 512;
|
|
+ REG_DMAC_DCMD(dma_chan) = DMAC_DCMD_SAI | DMAC_DCMD_DAI | DMAC_DCMD_SWDH_32 | DMAC_DCMD_DWDH_32 | DMAC_DCMD_DS_32BYTE | DMAC_DCMD_TIE;
|
|
+ REG_DMAC_DCCSR(dma_chan) = DMAC_DCCSR_NDES | DMAC_DCCSR_EN;
|
|
+ REG_DMAC_DMACR(dma_chan/HALF_DMA_NUM) = DMAC_DMACR_DMAE; /* global DMA enable bit */
|
|
+
|
|
+ printk("DMA started. IMR=%08x\n", REG_INTC_IMR);
|
|
+
|
|
+ /* wait a long time, ensure transfer end */
|
|
+ printk("wait 3s...\n");
|
|
+ mdelay(3000); /* wait 3s */
|
|
+
|
|
+ REG_DMAC_DCCSR(dma_chan) &= ~DMAC_DCCSR_EN; /* disable DMA */
|
|
+ /* free buffers */
|
|
+ printk("free DMA buffers\n");
|
|
+ free_pages(dma_src_addr, 2);
|
|
+ free_pages(dma_dst_addr, 2);
|
|
+
|
|
+ if (dma_desc)
|
|
+ free_pages((unsigned int)dma_desc, 0);
|
|
+
|
|
+ /* free dma */
|
|
+ jz_free_dma(dma_chan);
|
|
+}
|
|
+
|
|
+void dma_desc_test(void)
|
|
+{
|
|
+ unsigned int next, addr, i;
|
|
+ static jz_dma_desc *desc;
|
|
+
|
|
+ printk("dma_desc_test\n");
|
|
+
|
|
+ /* Request DMA channel and setup irq handler */
|
|
+ dma_chan = jz_request_dma(DMA_ID_AUTO, "auto", jz4750_dma_irq,
|
|
+ IRQF_DISABLED, NULL);
|
|
+ if (dma_chan < 0) {
|
|
+ printk("Setup irq failed\n");
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ printk("Requested DMA channel = %d\n", dma_chan);
|
|
+
|
|
+ /* Allocate DMA buffers */
|
|
+ dma_src_addr = __get_free_pages(GFP_KERNEL, 2); /* 16KB */
|
|
+ dma_dst_addr = __get_free_pages(GFP_KERNEL, 2); /* 16KB */
|
|
+
|
|
+ dma_src_phys_addr = CPHYSADDR(dma_src_addr);
|
|
+ dma_dst_phys_addr = CPHYSADDR(dma_dst_addr);
|
|
+
|
|
+ printk("Buffer addresses: 0x%08x 0x%08x 0x%08x 0x%08x\n",
|
|
+ dma_src_addr, dma_src_phys_addr, dma_dst_addr, dma_dst_phys_addr);
|
|
+
|
|
+ /* Prepare data for source buffer */
|
|
+ addr = (unsigned int)dma_src_addr;
|
|
+ for (i = 0; i < TEST_DMA_SIZE; i += 4) {
|
|
+ *(volatile unsigned int *)addr = addr;
|
|
+ addr += 4;
|
|
+ }
|
|
+ dma_cache_wback((unsigned long)dma_src_addr, TEST_DMA_SIZE);
|
|
+
|
|
+ /* Init target buffer */
|
|
+ memset((void *)dma_dst_addr, 0, TEST_DMA_SIZE);
|
|
+ dma_cache_wback((unsigned long)dma_dst_addr, TEST_DMA_SIZE);
|
|
+
|
|
+ /* Allocate DMA descriptors */
|
|
+ dma_desc = (jz_dma_desc *)__get_free_pages(GFP_KERNEL, 0);
|
|
+ dma_desc_phys_addr = CPHYSADDR((unsigned long)dma_desc);
|
|
+
|
|
+ printk("DMA descriptor address: 0x%08x 0x%08x\n", (u32)dma_desc, dma_desc_phys_addr);
|
|
+
|
|
+ /* Setup DMA descriptors */
|
|
+ desc = dma_desc;
|
|
+ next = (dma_desc_phys_addr + (sizeof(jz_dma_desc))) >> 4;
|
|
+
|
|
+ desc->dcmd = DMAC_DCMD_SAI | DMAC_DCMD_DAI | DMAC_DCMD_RDIL_IGN | DMAC_DCMD_SWDH_32 | DMAC_DCMD_DWDH_32 | DMAC_DCMD_DS_32BYTE | DMAC_DCMD_DES_V | DMAC_DCMD_DES_VM | DMAC_DCMD_DES_VIE | DMAC_DCMD_TIE | DMAC_DCMD_LINK;
|
|
+ desc->dsadr = dma_src_phys_addr; /* DMA source address */
|
|
+ desc->dtadr = dma_dst_phys_addr; /* DMA target address */
|
|
+ desc->ddadr = (next << 24) + 128; /* size: 128*32 bytes = 4096 bytes */
|
|
+
|
|
+ desc++;
|
|
+ next = (dma_desc_phys_addr + 2*(sizeof(jz_dma_desc))) >> 4;
|
|
+
|
|
+ desc->dcmd = DMAC_DCMD_SAI | DMAC_DCMD_DAI | DMAC_DCMD_RDIL_IGN | DMAC_DCMD_SWDH_32 | DMAC_DCMD_DWDH_32 | DMAC_DCMD_DS_16BYTE | DMAC_DCMD_DES_V | DMAC_DCMD_DES_VM | DMAC_DCMD_DES_VIE | DMAC_DCMD_TIE | DMAC_DCMD_LINK;
|
|
+ desc->dsadr = dma_src_phys_addr + 4096; /* DMA source address */
|
|
+ desc->dtadr = dma_dst_phys_addr + 4096; /* DMA target address */
|
|
+ desc->ddadr = (next << 24) + 256; /* size: 256*16 bytes = 4096 bytes */
|
|
+
|
|
+ desc++;
|
|
+ next = (dma_desc_phys_addr + 3*(sizeof(jz_dma_desc))) >> 4;
|
|
+
|
|
+ desc->dcmd = DMAC_DCMD_SAI | DMAC_DCMD_DAI | DMAC_DCMD_RDIL_IGN | DMAC_DCMD_SWDH_32 | DMAC_DCMD_DWDH_32 | DMAC_DCMD_DS_16BYTE | DMAC_DCMD_DES_V | DMAC_DCMD_DES_VM | DMAC_DCMD_DES_VIE | DMAC_DCMD_TIE | DMAC_DCMD_LINK;
|
|
+ desc->dsadr = dma_src_phys_addr + 8192; /* DMA source address */
|
|
+ desc->dtadr = dma_dst_phys_addr + 8192; /* DMA target address */
|
|
+ desc->ddadr = (next << 24) + 256; /* size: 256*16 bytes = 4096 bytes */
|
|
+
|
|
+ desc++;
|
|
+ next = (dma_desc_phys_addr + 4*(sizeof(jz_dma_desc))) >> 4;
|
|
+
|
|
+ desc->dcmd = DMAC_DCMD_SAI | DMAC_DCMD_DAI | DMAC_DCMD_RDIL_IGN | DMAC_DCMD_SWDH_32 | DMAC_DCMD_DWDH_32 | DMAC_DCMD_DS_32BIT | DMAC_DCMD_DES_V | DMAC_DCMD_DES_VM | DMAC_DCMD_DES_VIE | DMAC_DCMD_TIE;
|
|
+ desc->dsadr = dma_src_phys_addr + 12*1024; /* DMA source address */
|
|
+ desc->dtadr = dma_dst_phys_addr + 12*1024; /* DMA target address */
|
|
+ desc->ddadr = (next << 24) + 1024; /* size: 1024*4 bytes = 4096 bytes */
|
|
+
|
|
+ dma_cache_wback((unsigned long)dma_desc, 4*(sizeof(jz_dma_desc)));
|
|
+
|
|
+ /* Setup DMA descriptor address */
|
|
+ REG_DMAC_DDA(dma_chan) = dma_desc_phys_addr;
|
|
+
|
|
+ /* Setup request source */
|
|
+ REG_DMAC_DRSR(dma_chan) = DMAC_DRSR_RS_AUTO;
|
|
+
|
|
+ /* Setup DMA channel control/status register */
|
|
+ REG_DMAC_DCCSR(dma_chan) = DMAC_DCCSR_EN; /* descriptor transfer, clear status, start channel */
|
|
+
|
|
+ /* Enable DMA */
|
|
+ REG_DMAC_DMACR(dma_chan/HALF_DMA_NUM) = DMAC_DMACR_DMAE;
|
|
+
|
|
+ /* DMA doorbell set -- start DMA now ... */
|
|
+ REG_DMAC_DMADBSR(dma_chan/HALF_DMA_NUM) = 1 << dma_chan;
|
|
+
|
|
+ printk("DMA started. IMR=%08x\n", REG_INTC_IMR);
|
|
+ /* wait a long time, ensure transfer end */
|
|
+ printk("wait 3s...\n");
|
|
+ mdelay(3000); /* wait 3s */
|
|
+
|
|
+ REG_DMAC_DCCSR(dma_chan) &= ~DMAC_DCCSR_EN; /* disable DMA */
|
|
+ /* free buffers */
|
|
+ printk("free DMA buffers\n");
|
|
+ free_pages(dma_src_addr, 2);
|
|
+ free_pages(dma_dst_addr, 2);
|
|
+
|
|
+ if (dma_desc)
|
|
+ free_pages((unsigned int)dma_desc, 0);
|
|
+
|
|
+ /* free dma */
|
|
+ jz_free_dma(dma_chan);
|
|
+}
|
|
+
|
|
+#endif
|
|
+
|
|
+//EXPORT_SYMBOL_NOVERS(jz_dma_table);
|
|
+EXPORT_SYMBOL(jz_dma_table);
|
|
+EXPORT_SYMBOL(jz_request_dma);
|
|
+EXPORT_SYMBOL(jz_free_dma);
|
|
+EXPORT_SYMBOL(jz_set_dma_src_width);
|
|
+EXPORT_SYMBOL(jz_set_dma_dest_width);
|
|
+EXPORT_SYMBOL(jz_set_dma_block_size);
|
|
+EXPORT_SYMBOL(jz_set_dma_mode);
|
|
+EXPORT_SYMBOL(set_dma_mode);
|
|
+EXPORT_SYMBOL(jz_set_oss_dma);
|
|
+EXPORT_SYMBOL(jz_set_alsa_dma);
|
|
+EXPORT_SYMBOL(set_dma_addr);
|
|
+EXPORT_SYMBOL(set_dma_count);
|
|
+EXPORT_SYMBOL(get_dma_residue);
|
|
+EXPORT_SYMBOL(enable_dma);
|
|
+EXPORT_SYMBOL(disable_dma);
|
|
+EXPORT_SYMBOL(dump_jz_dma_channel);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750/i2c.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750/i2c.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,273 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4750/i2c.c
|
|
+ *
|
|
+ * Jz4750 I2C routines.
|
|
+ *
|
|
+ * Copyright (C) 2005,2006 Ingenic Semiconductor Inc.
|
|
+ * Author: <lhhuang@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can distribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License (Version 2) as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ * This program is distributed in the hope it will be useful, but WITHOUT
|
|
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
+ * for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License along
|
|
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
|
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
|
|
+ *
|
|
+ */
|
|
+#include <linux/module.h>
|
|
+#include <linux/types.h>
|
|
+#include <linux/delay.h>
|
|
+#include <asm/uaccess.h>
|
|
+#include <asm/addrspace.h>
|
|
+
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+/* I2C protocol */
|
|
+#define I2C_READ 1
|
|
+#define I2C_WRITE 0
|
|
+
|
|
+#define TIMEOUT 1000
|
|
+
|
|
+/*
|
|
+ * I2C bus protocol basic routines
|
|
+ */
|
|
+static int i2c_put_data(unsigned char data)
|
|
+{
|
|
+ unsigned int timeout = TIMEOUT*10;
|
|
+
|
|
+ __i2c_write(data);
|
|
+ __i2c_set_drf();
|
|
+ while (__i2c_check_drf() != 0);
|
|
+ while (!__i2c_transmit_ended());
|
|
+ while (!__i2c_received_ack() && timeout)
|
|
+ timeout--;
|
|
+
|
|
+ if (timeout)
|
|
+ return 0;
|
|
+ else
|
|
+ return -ETIMEDOUT;
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_JZ_TPANEL_ATA2508
|
|
+static int i2c_put_data_nack(unsigned char data)
|
|
+{
|
|
+ unsigned int timeout = TIMEOUT*10;
|
|
+
|
|
+ __i2c_write(data);
|
|
+ __i2c_set_drf();
|
|
+ while (__i2c_check_drf() != 0);
|
|
+ while (!__i2c_transmit_ended());
|
|
+ while (timeout--);
|
|
+ return 0;
|
|
+}
|
|
+#endif
|
|
+
|
|
+static int i2c_get_data(unsigned char *data, int ack)
|
|
+{
|
|
+ int timeout = TIMEOUT*10;
|
|
+
|
|
+ if (!ack)
|
|
+ __i2c_send_nack();
|
|
+ else
|
|
+ __i2c_send_ack();
|
|
+
|
|
+ while (__i2c_check_drf() == 0 && timeout)
|
|
+ timeout--;
|
|
+
|
|
+ if (timeout) {
|
|
+ if (!ack)
|
|
+ __i2c_send_stop();
|
|
+ *data = __i2c_read();
|
|
+ __i2c_clear_drf();
|
|
+ return 0;
|
|
+ } else
|
|
+ return -ETIMEDOUT;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * I2C interface
|
|
+ */
|
|
+void i2c_open(void)
|
|
+{
|
|
+ __i2c_set_clk(jz_clocks.extalclk, 10000); /* default 10 KHz */
|
|
+ __i2c_enable();
|
|
+}
|
|
+
|
|
+void i2c_close(void)
|
|
+{
|
|
+ udelay(300); /* wait for STOP goes over. */
|
|
+ __i2c_disable();
|
|
+}
|
|
+
|
|
+void i2c_setclk(unsigned int i2cclk)
|
|
+{
|
|
+ __i2c_set_clk(jz_clocks.extalclk, i2cclk);
|
|
+}
|
|
+
|
|
+int i2c_lseek(unsigned char device, unsigned char offset)
|
|
+{
|
|
+ __i2c_send_nack(); /* Master does not send ACK, slave sends it */
|
|
+ __i2c_send_start();
|
|
+ if (i2c_put_data( (device << 1) | I2C_WRITE ) < 0)
|
|
+ goto device_err;
|
|
+ if (i2c_put_data(offset) < 0)
|
|
+ goto address_err;
|
|
+ return 0;
|
|
+ device_err:
|
|
+ printk(KERN_DEBUG "No I2C device (0x%02x) installed.\n", device);
|
|
+ __i2c_send_stop();
|
|
+ return -ENODEV;
|
|
+ address_err:
|
|
+ printk(KERN_DEBUG "No I2C device (0x%02x) response.\n", device);
|
|
+ __i2c_send_stop();
|
|
+ return -EREMOTEIO;
|
|
+}
|
|
+
|
|
+int i2c_read(unsigned char device, unsigned char *buf,
|
|
+ unsigned char address, int count)
|
|
+{
|
|
+ int cnt = count;
|
|
+ int timeout = 5;
|
|
+
|
|
+L_try_again:
|
|
+
|
|
+ if (timeout < 0)
|
|
+ goto L_timeout;
|
|
+
|
|
+ __i2c_send_nack(); /* Master does not send ACK, slave sends it */
|
|
+ __i2c_send_start();
|
|
+ if (i2c_put_data( (device << 1) | I2C_WRITE ) < 0)
|
|
+ goto device_werr;
|
|
+ if (i2c_put_data(address) < 0)
|
|
+ goto address_err;
|
|
+
|
|
+ __i2c_send_start();
|
|
+ if (i2c_put_data( (device << 1) | I2C_READ ) < 0)
|
|
+ goto device_rerr;
|
|
+ __i2c_send_ack(); /* Master sends ACK for continue reading */
|
|
+ while (cnt) {
|
|
+ if (cnt == 1) {
|
|
+ if (i2c_get_data(buf, 0) < 0)
|
|
+ break;
|
|
+ } else {
|
|
+ if (i2c_get_data(buf, 1) < 0)
|
|
+ break;
|
|
+ }
|
|
+ cnt--;
|
|
+ buf++;
|
|
+ }
|
|
+
|
|
+ __i2c_send_stop();
|
|
+ return count - cnt;
|
|
+ device_rerr:
|
|
+ device_werr:
|
|
+ address_err:
|
|
+ timeout --;
|
|
+ __i2c_send_stop();
|
|
+ goto L_try_again;
|
|
+
|
|
+L_timeout:
|
|
+ __i2c_send_stop();
|
|
+ printk("Read I2C device 0x%2x failed.\n", device);
|
|
+ return -ENODEV;
|
|
+}
|
|
+
|
|
+int i2c_write(unsigned char device, unsigned char *buf,
|
|
+ unsigned char address, int count)
|
|
+{
|
|
+ int cnt = count;
|
|
+ int cnt_in_pg;
|
|
+ int timeout = 5;
|
|
+ unsigned char *tmpbuf;
|
|
+ unsigned char tmpaddr;
|
|
+
|
|
+ __i2c_send_nack(); /* Master does not send ACK, slave sends it */
|
|
+
|
|
+ W_try_again:
|
|
+ if (timeout < 0)
|
|
+ goto W_timeout;
|
|
+
|
|
+ cnt = count;
|
|
+ tmpbuf = (unsigned char *)buf;
|
|
+ tmpaddr = address;
|
|
+
|
|
+ start_write_page:
|
|
+ cnt_in_pg = 0;
|
|
+ __i2c_send_start();
|
|
+ if (i2c_put_data( (device << 1) | I2C_WRITE ) < 0)
|
|
+ goto device_err;
|
|
+#ifdef CONFIG_JZ_TPANEL_ATA2508
|
|
+ if (address == 0xff) {
|
|
+ if (i2c_put_data_nack(tmpaddr) < 0)
|
|
+ goto address_err;
|
|
+ while (cnt) {
|
|
+ if (++cnt_in_pg > 8) {
|
|
+ __i2c_send_stop();
|
|
+ mdelay(1);
|
|
+ tmpaddr += 8;
|
|
+ goto start_write_page;
|
|
+ }
|
|
+ if (i2c_put_data_nack(*tmpbuf) < 0)
|
|
+ break;
|
|
+ cnt--;
|
|
+ tmpbuf++;
|
|
+ }
|
|
+ }
|
|
+ else {
|
|
+
|
|
+ if (i2c_put_data(tmpaddr) < 0)
|
|
+ goto address_err;
|
|
+ while (cnt) {
|
|
+ if (++cnt_in_pg > 8) {
|
|
+ __i2c_send_stop();
|
|
+ mdelay(1);
|
|
+ tmpaddr += 8;
|
|
+ goto start_write_page;
|
|
+ }
|
|
+ if (i2c_put_data(*tmpbuf) < 0)
|
|
+ break;
|
|
+ cnt--;
|
|
+ tmpbuf++;
|
|
+ }
|
|
+ }
|
|
+#else
|
|
+ if (i2c_put_data(tmpaddr) < 0)
|
|
+ goto address_err;
|
|
+ while (cnt) {
|
|
+ if (++cnt_in_pg > 8) {
|
|
+ __i2c_send_stop();
|
|
+ mdelay(1);
|
|
+ tmpaddr += 8;
|
|
+ goto start_write_page;
|
|
+ }
|
|
+ if (i2c_put_data(*tmpbuf) < 0)
|
|
+ break;
|
|
+ cnt--;
|
|
+ tmpbuf++;
|
|
+ }
|
|
+#endif
|
|
+ __i2c_send_stop();
|
|
+ return count - cnt;
|
|
+ device_err:
|
|
+ address_err:
|
|
+ timeout--;
|
|
+ __i2c_send_stop();
|
|
+ goto W_try_again;
|
|
+
|
|
+ W_timeout:
|
|
+ printk(KERN_DEBUG "Write I2C device 0x%2x failed.\n", device);
|
|
+ __i2c_send_stop();
|
|
+ return -ENODEV;
|
|
+}
|
|
+
|
|
+EXPORT_SYMBOL(i2c_open);
|
|
+EXPORT_SYMBOL(i2c_close);
|
|
+EXPORT_SYMBOL(i2c_setclk);
|
|
+EXPORT_SYMBOL(i2c_read);
|
|
+EXPORT_SYMBOL(i2c_write);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750/irq.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750/irq.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,299 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4750/irq.c
|
|
+ *
|
|
+ * JZ4750 interrupt routines.
|
|
+ *
|
|
+ * Copyright (c) 2006-2007 Ingenic Semiconductor Inc.
|
|
+ * Author: <lhhuang@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License as published by the
|
|
+ * Free Software Foundation; either version 2 of the License, or (at your
|
|
+ * option) any later version.
|
|
+ */
|
|
+#include <linux/errno.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/irq.h>
|
|
+#include <linux/kernel_stat.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/signal.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/types.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/timex.h>
|
|
+#include <linux/slab.h>
|
|
+#include <linux/random.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/bitops.h>
|
|
+
|
|
+#include <asm/bootinfo.h>
|
|
+#include <asm/io.h>
|
|
+#include <asm/mipsregs.h>
|
|
+#include <asm/system.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+/*
|
|
+ * INTC irq type
|
|
+ */
|
|
+
|
|
+static void enable_intc_irq(unsigned int irq)
|
|
+{
|
|
+ __intc_unmask_irq(irq);
|
|
+}
|
|
+
|
|
+static void disable_intc_irq(unsigned int irq)
|
|
+{
|
|
+ __intc_mask_irq(irq);
|
|
+}
|
|
+
|
|
+static void mask_and_ack_intc_irq(unsigned int irq)
|
|
+{
|
|
+ __intc_mask_irq(irq);
|
|
+ __intc_ack_irq(irq);
|
|
+}
|
|
+
|
|
+static void end_intc_irq(unsigned int irq)
|
|
+{
|
|
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
|
|
+ enable_intc_irq(irq);
|
|
+ }
|
|
+}
|
|
+
|
|
+static unsigned int startup_intc_irq(unsigned int irq)
|
|
+{
|
|
+ enable_intc_irq(irq);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void shutdown_intc_irq(unsigned int irq)
|
|
+{
|
|
+ disable_intc_irq(irq);
|
|
+}
|
|
+
|
|
+static struct irq_chip intc_irq_type = {
|
|
+ .typename = "INTC",
|
|
+ .startup = startup_intc_irq,
|
|
+ .shutdown = shutdown_intc_irq,
|
|
+ .enable = enable_intc_irq,
|
|
+ .disable = disable_intc_irq,
|
|
+ .ack = mask_and_ack_intc_irq,
|
|
+ .end = end_intc_irq,
|
|
+};
|
|
+
|
|
+/*
|
|
+ * GPIO irq type
|
|
+ */
|
|
+
|
|
+static void enable_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ unsigned int intc_irq;
|
|
+
|
|
+ if (irq < (IRQ_GPIO_0 + 32)) {
|
|
+ intc_irq = IRQ_GPIO0;
|
|
+ }
|
|
+ else if (irq < (IRQ_GPIO_0 + 64)) {
|
|
+ intc_irq = IRQ_GPIO1;
|
|
+ }
|
|
+ else if (irq < (IRQ_GPIO_0 + 96)) {
|
|
+ intc_irq = IRQ_GPIO2;
|
|
+ }
|
|
+ else if (irq < (IRQ_GPIO_0 + 128)) {
|
|
+ intc_irq = IRQ_GPIO3;
|
|
+ }
|
|
+ else if (irq < (IRQ_GPIO_0 + 160)) {
|
|
+ intc_irq = IRQ_GPIO4;
|
|
+ }
|
|
+ else {
|
|
+ intc_irq = IRQ_GPIO5;
|
|
+ }
|
|
+
|
|
+ enable_intc_irq(intc_irq);
|
|
+ __gpio_unmask_irq(irq - IRQ_GPIO_0);
|
|
+}
|
|
+
|
|
+static void disable_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ __gpio_mask_irq(irq - IRQ_GPIO_0);
|
|
+}
|
|
+
|
|
+static void mask_and_ack_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ __gpio_mask_irq(irq - IRQ_GPIO_0);
|
|
+ __gpio_ack_irq(irq - IRQ_GPIO_0);
|
|
+}
|
|
+
|
|
+static void end_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
|
|
+ enable_gpio_irq(irq);
|
|
+ }
|
|
+}
|
|
+
|
|
+static unsigned int startup_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ enable_gpio_irq(irq);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void shutdown_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ disable_gpio_irq(irq);
|
|
+}
|
|
+
|
|
+static struct irq_chip gpio_irq_type = {
|
|
+ .typename = "GPIO",
|
|
+ .startup = startup_gpio_irq,
|
|
+ .shutdown = shutdown_gpio_irq,
|
|
+ .enable = enable_gpio_irq,
|
|
+ .disable = disable_gpio_irq,
|
|
+ .ack = mask_and_ack_gpio_irq,
|
|
+ .end = end_gpio_irq,
|
|
+};
|
|
+
|
|
+/*
|
|
+ * DMA irq type
|
|
+ */
|
|
+
|
|
+static void enable_dma_irq(unsigned int irq)
|
|
+{
|
|
+ unsigned int intc_irq;
|
|
+
|
|
+ if ( irq < (IRQ_DMA_0 + HALF_DMA_NUM) ) /* DMAC Group 0 irq */
|
|
+ intc_irq = IRQ_DMAC0;
|
|
+ else if ( irq < (IRQ_DMA_0 + MAX_DMA_NUM) ) /* DMAC Group 1 irq */
|
|
+ intc_irq = IRQ_DMAC1;
|
|
+ else {
|
|
+ printk("%s, unexpected dma irq #%d\n", __FILE__, irq);
|
|
+ return;
|
|
+ }
|
|
+ __intc_unmask_irq(intc_irq);
|
|
+ __dmac_channel_enable_irq(irq - IRQ_DMA_0);
|
|
+}
|
|
+
|
|
+static void disable_dma_irq(unsigned int irq)
|
|
+{
|
|
+ __dmac_channel_disable_irq(irq - IRQ_DMA_0);
|
|
+}
|
|
+
|
|
+static void mask_and_ack_dma_irq(unsigned int irq)
|
|
+{
|
|
+ unsigned int intc_irq;
|
|
+
|
|
+ if ( irq < (IRQ_DMA_0 + HALF_DMA_NUM) ) /* DMAC Group 0 irq */
|
|
+ intc_irq = IRQ_DMAC0;
|
|
+ else if ( irq < (IRQ_DMA_0 + MAX_DMA_NUM) ) /* DMAC Group 1 irq */
|
|
+ intc_irq = IRQ_DMAC1;
|
|
+ else {
|
|
+ printk("%s, unexpected dma irq #%d\n", __FILE__, irq);
|
|
+ return ;
|
|
+ }
|
|
+ __intc_ack_irq(intc_irq);
|
|
+ __dmac_channel_ack_irq(irq-IRQ_DMA_0); /* needed?? add 20080506, Wolfgang */
|
|
+ __dmac_channel_disable_irq(irq - IRQ_DMA_0);
|
|
+}
|
|
+
|
|
+static void end_dma_irq(unsigned int irq)
|
|
+{
|
|
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
|
|
+ enable_dma_irq(irq);
|
|
+ }
|
|
+}
|
|
+
|
|
+static unsigned int startup_dma_irq(unsigned int irq)
|
|
+{
|
|
+ enable_dma_irq(irq);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void shutdown_dma_irq(unsigned int irq)
|
|
+{
|
|
+ disable_dma_irq(irq);
|
|
+}
|
|
+
|
|
+static struct irq_chip dma_irq_type = {
|
|
+ .typename = "DMA",
|
|
+ .startup = startup_dma_irq,
|
|
+ .shutdown = shutdown_dma_irq,
|
|
+ .enable = enable_dma_irq,
|
|
+ .disable = disable_dma_irq,
|
|
+ .ack = mask_and_ack_dma_irq,
|
|
+ .end = end_dma_irq,
|
|
+};
|
|
+
|
|
+//----------------------------------------------------------------------
|
|
+
|
|
+void __init arch_init_irq(void)
|
|
+{
|
|
+ int i;
|
|
+
|
|
+ clear_c0_status(0xff04); /* clear ERL */
|
|
+ set_c0_status(0x0400); /* set IP2 */
|
|
+
|
|
+ /* Set up INTC irq
|
|
+ */
|
|
+ for (i = 0; i < 32; i++) {
|
|
+ disable_intc_irq(i);
|
|
+ irq_desc[i].chip = &intc_irq_type;
|
|
+ }
|
|
+
|
|
+ /* Set up DMAC irq
|
|
+ */
|
|
+ for (i = 0; i < NUM_DMA; i++) {
|
|
+ disable_dma_irq(IRQ_DMA_0 + i);
|
|
+ irq_desc[IRQ_DMA_0 + i].chip = &dma_irq_type;
|
|
+ }
|
|
+
|
|
+ /* Set up GPIO irq
|
|
+ */
|
|
+ for (i = 0; i < NUM_GPIO; i++) {
|
|
+ disable_gpio_irq(IRQ_GPIO_0 + i);
|
|
+ irq_desc[IRQ_GPIO_0 + i].chip = &gpio_irq_type;
|
|
+ }
|
|
+}
|
|
+
|
|
+static int plat_real_irq(int irq)
|
|
+{
|
|
+ switch (irq) {
|
|
+ case IRQ_GPIO0:
|
|
+ irq = __gpio_group_irq(0) + IRQ_GPIO_0;
|
|
+ break;
|
|
+ case IRQ_GPIO1:
|
|
+ irq = __gpio_group_irq(1) + IRQ_GPIO_0 + 32;
|
|
+ break;
|
|
+ case IRQ_GPIO2:
|
|
+ irq = __gpio_group_irq(2) + IRQ_GPIO_0 + 64;
|
|
+ break;
|
|
+ case IRQ_GPIO3:
|
|
+ irq = __gpio_group_irq(3) + IRQ_GPIO_0 + 96;
|
|
+ break;
|
|
+ case IRQ_GPIO4:
|
|
+ irq = __gpio_group_irq(4) + IRQ_GPIO_0 + 128;
|
|
+ break;
|
|
+ case IRQ_GPIO5:
|
|
+ irq = __gpio_group_irq(5) + IRQ_GPIO_0 + 160;
|
|
+ break;
|
|
+ case IRQ_DMAC0:
|
|
+ case IRQ_DMAC1:
|
|
+ irq = __dmac_get_irq() + IRQ_DMA_0;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ return irq;
|
|
+}
|
|
+
|
|
+asmlinkage void plat_irq_dispatch(void)
|
|
+{
|
|
+ int irq = 0;
|
|
+ static unsigned long intc_ipr = 0;
|
|
+
|
|
+ intc_ipr |= REG_INTC_IPR;
|
|
+
|
|
+ if (!intc_ipr) return;
|
|
+
|
|
+ irq = ffs(intc_ipr) - 1;
|
|
+ intc_ipr &= ~(1<<irq);
|
|
+
|
|
+ irq = plat_real_irq(irq);
|
|
+ do_IRQ(irq);
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750/platform.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750/platform.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,141 @@
|
|
+/*
|
|
+ * Platform device support for Jz4740 SoC.
|
|
+ *
|
|
+ * Copyright 2007, <yliu@ingenic.cn>
|
|
+ *
|
|
+ * This file is licensed under the terms of the GNU General Public
|
|
+ * License version 2. This program is licensed "as is" without any
|
|
+ * warranty of any kind, whether express or implied.
|
|
+ */
|
|
+
|
|
+#include <linux/device.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/resource.h>
|
|
+
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+/* OHCI (USB full speed host controller) */
|
|
+static struct resource jz_usb_ohci_resources[] = {
|
|
+ [0] = {
|
|
+ .start = CPHYSADDR(UHC_BASE), // phys addr for ioremap
|
|
+ .end = CPHYSADDR(UHC_BASE) + 0x10000 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = IRQ_UHC,
|
|
+ .end = IRQ_UHC,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+/* The dmamask must be set for OHCI to work */
|
|
+static u64 ohci_dmamask = ~(u32)0;
|
|
+
|
|
+static struct platform_device jz_usb_ohci_device = {
|
|
+ .name = "jz-ohci",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &ohci_dmamask,
|
|
+ .coherent_dma_mask = 0xffffffff,
|
|
+ },
|
|
+ .num_resources = ARRAY_SIZE(jz_usb_ohci_resources),
|
|
+ .resource = jz_usb_ohci_resources,
|
|
+};
|
|
+
|
|
+/*** LCD controller ***/
|
|
+static struct resource jz_lcd_resources[] = {
|
|
+ [0] = {
|
|
+ .start = CPHYSADDR(LCD_BASE),
|
|
+ .end = CPHYSADDR(LCD_BASE) + 0x10000 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = IRQ_LCD,
|
|
+ .end = IRQ_LCD,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ }
|
|
+};
|
|
+
|
|
+static u64 jz_lcd_dmamask = ~(u32)0;
|
|
+
|
|
+static struct platform_device jz_lcd_device = {
|
|
+ .name = "jz-lcd",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &jz_lcd_dmamask,
|
|
+ .coherent_dma_mask = 0xffffffff,
|
|
+ },
|
|
+ .num_resources = ARRAY_SIZE(jz_lcd_resources),
|
|
+ .resource = jz_lcd_resources,
|
|
+};
|
|
+
|
|
+/* UDC (USB gadget controller) */
|
|
+static struct resource jz_usb_gdt_resources[] = {
|
|
+ [0] = {
|
|
+ .start = CPHYSADDR(UDC_BASE),
|
|
+ .end = CPHYSADDR(UDC_BASE) + 0x10000 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = IRQ_UDC,
|
|
+ .end = IRQ_UDC,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static u64 udc_dmamask = ~(u32)0;
|
|
+
|
|
+static struct platform_device jz_usb_gdt_device = {
|
|
+ .name = "jz-udc",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &udc_dmamask,
|
|
+ .coherent_dma_mask = 0xffffffff,
|
|
+ },
|
|
+ .num_resources = ARRAY_SIZE(jz_usb_gdt_resources),
|
|
+ .resource = jz_usb_gdt_resources,
|
|
+};
|
|
+
|
|
+/** MMC/SD controller **/
|
|
+static struct resource jz_mmc_resources[] = {
|
|
+ [0] = {
|
|
+ .start = CPHYSADDR(MSC_BASE),
|
|
+ .end = CPHYSADDR(MSC_BASE) + 0x10000 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = IRQ_MSC0,
|
|
+ .end = IRQ_MSC0,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ }
|
|
+};
|
|
+
|
|
+static u64 jz_mmc_dmamask = ~(u32)0;
|
|
+
|
|
+static struct platform_device jz_mmc_device = {
|
|
+ .name = "jz-mmc",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &jz_mmc_dmamask,
|
|
+ .coherent_dma_mask = 0xffffffff,
|
|
+ },
|
|
+ .num_resources = ARRAY_SIZE(jz_mmc_resources),
|
|
+ .resource = jz_mmc_resources,
|
|
+};
|
|
+
|
|
+/* All */
|
|
+static struct platform_device *jz_platform_devices[] __initdata = {
|
|
+ &jz_usb_ohci_device,
|
|
+ &jz_lcd_device,
|
|
+ &jz_usb_gdt_device,
|
|
+ &jz_mmc_device,
|
|
+};
|
|
+
|
|
+static int __init jz_platform_init(void)
|
|
+{
|
|
+ return platform_add_devices(jz_platform_devices, ARRAY_SIZE(jz_platform_devices));
|
|
+}
|
|
+
|
|
+arch_initcall(jz_platform_init);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750/pm.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750/pm.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,461 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4750/common/pm.c
|
|
+ *
|
|
+ * JZ4750 Power Management Routines
|
|
+ *
|
|
+ * Copyright (C) 2006 Ingenic Semiconductor Inc.
|
|
+ * Author: <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can distribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License (Version 2) as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ * This program is distributed in the hope it will be useful, but WITHOUT
|
|
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
+ * for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License along
|
|
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
|
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/pm.h>
|
|
+#include <linux/pm_legacy.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/proc_fs.h>
|
|
+#include <linux/sysctl.h>
|
|
+
|
|
+#include <asm/cacheops.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+#undef DEBUG
|
|
+//#define DEBUG
|
|
+#ifdef DEBUG
|
|
+#define dprintk(x...) printk(x)
|
|
+#else
|
|
+#define dprintk(x...)
|
|
+#endif
|
|
+
|
|
+#define GPIO_PORT_NUM 6
|
|
+
|
|
+/*
|
|
+ * __gpio_as_sleep set all pins to pull-disable, and set all pins as input
|
|
+ * except sdram and the pins which can be used as CS1_N to CS4_N for chip select.
|
|
+ */
|
|
+#define __gpio_as_sleep() \
|
|
+do { \
|
|
+ REG_GPIO_PXFUNC(1) = ~0x03ff7fff; \
|
|
+ REG_GPIO_PXSELC(1) = ~0x03ff7fff; \
|
|
+ REG_GPIO_PXDIRC(1) = ~0x03ff7fff; \
|
|
+ REG_GPIO_PXPES(1) = 0xffffffff; \
|
|
+ REG_GPIO_PXFUNC(2) = ~0x01e00000; \
|
|
+ REG_GPIO_PXSELC(2) = ~0x01e00000; \
|
|
+ REG_GPIO_PXDIRC(2) = ~0x01e00000; \
|
|
+ REG_GPIO_PXPES(2) = 0xffffffff; \
|
|
+ REG_GPIO_PXFUNC(3) = 0xffffffff; \
|
|
+ REG_GPIO_PXSELC(3) = 0xffffffff; \
|
|
+ REG_GPIO_PXDIRC(3) = 0xffffffff; \
|
|
+ REG_GPIO_PXPES(3) = 0xffffffff; \
|
|
+ REG_GPIO_PXFUNC(4) = 0xffffffff; \
|
|
+ REG_GPIO_PXSELC(4) = 0xffffffff; \
|
|
+ REG_GPIO_PXDIRC(4) = 0xffffffff; \
|
|
+ REG_GPIO_PXPES(4) = 0xffffffff; \
|
|
+ REG_GPIO_PXFUNC(5) = 0xffffffff; \
|
|
+ REG_GPIO_PXSELC(5) = 0xffffffff; \
|
|
+ REG_GPIO_PXDIRC(5) = 0xffffffff; \
|
|
+ REG_GPIO_PXPES(5) = 0xffffffff; \
|
|
+} while (0)
|
|
+
|
|
+static int jz_pm_do_hibernate(void)
|
|
+{
|
|
+ printk("Put CPU into hibernate mode.\n");
|
|
+
|
|
+ /* Mask all interrupts */
|
|
+ REG_INTC_IMSR = 0xffffffff;
|
|
+
|
|
+ /*
|
|
+ * RTC Wakeup or 1Hz interrupt can be enabled or disabled
|
|
+ * through RTC driver's ioctl (linux/driver/char/rtc_jz.c).
|
|
+ */
|
|
+
|
|
+ /* Set minimum wakeup_n pin low-level assertion time for wakeup: 100ms */
|
|
+ while (!(REG_RTC_RCR & RTC_RCR_WRDY));
|
|
+ REG_RTC_HWFCR = (100 << RTC_HWFCR_BIT);
|
|
+
|
|
+ /* Set reset pin low-level assertion time after wakeup: must > 60ms */
|
|
+ while (!(REG_RTC_RCR & RTC_RCR_WRDY));
|
|
+ REG_RTC_HRCR = (60 << RTC_HRCR_BIT); /* 60 ms */
|
|
+
|
|
+ /* Scratch pad register to be reserved */
|
|
+ while (!(REG_RTC_RCR & RTC_RCR_WRDY));
|
|
+ REG_RTC_HSPR = 0x12345678;
|
|
+
|
|
+ /* clear wakeup status register */
|
|
+ while (!(REG_RTC_RCR & RTC_RCR_WRDY));
|
|
+ REG_RTC_HWRSR = 0x0;
|
|
+
|
|
+ /* Put CPU to power down mode */
|
|
+ while (!(REG_RTC_RCR & RTC_RCR_WRDY));
|
|
+ REG_RTC_HCR = RTC_HCR_PD;
|
|
+
|
|
+ while (!(REG_RTC_RCR & RTC_RCR_WRDY));
|
|
+ while(1);
|
|
+
|
|
+ /* We can't get here */
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/* NOTES:
|
|
+ * 1: Pins that are floated (NC) should be set as input and pull-enable.
|
|
+ * 2: Pins that are pull-up or pull-down by outside should be set as input
|
|
+ * and pull-disable.
|
|
+ * 3: Pins that are connected to a chip except sdram and nand flash
|
|
+ * should be set as input and pull-disable, too.
|
|
+ */
|
|
+static void jz_board_do_sleep(unsigned long *ptr)
|
|
+{
|
|
+ unsigned char i;
|
|
+
|
|
+ /* Print messages of GPIO registers for debug */
|
|
+ for(i=0;i<GPIO_PORT_NUM;i++) {
|
|
+ dprintk("run dat:%x pin:%x fun:%x sel:%x dir:%x pull:%x msk:%x trg:%x\n", \
|
|
+ REG_GPIO_PXDAT(i),REG_GPIO_PXPIN(i),REG_GPIO_PXFUN(i),REG_GPIO_PXSEL(i), \
|
|
+ REG_GPIO_PXDIR(i),REG_GPIO_PXPE(i),REG_GPIO_PXIM(i),REG_GPIO_PXTRG(i));
|
|
+ }
|
|
+
|
|
+ /* Save GPIO registers */
|
|
+ for(i = 1; i < GPIO_PORT_NUM; i++) {
|
|
+ *ptr++ = REG_GPIO_PXFUN(i);
|
|
+ *ptr++ = REG_GPIO_PXSEL(i);
|
|
+ *ptr++ = REG_GPIO_PXDIR(i);
|
|
+ *ptr++ = REG_GPIO_PXPE(i);
|
|
+ *ptr++ = REG_GPIO_PXIM(i);
|
|
+ *ptr++ = REG_GPIO_PXDAT(i);
|
|
+ *ptr++ = REG_GPIO_PXTRG(i);
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * Set all pins to pull-disable, and set all pins as input except
|
|
+ * sdram and the pins which can be used as CS1_N to CS4_N for chip select.
|
|
+ */
|
|
+ __gpio_as_sleep();
|
|
+
|
|
+ /*
|
|
+ * Set proper status for GPC21 to GPC24 which can be used as CS1_N to CS4_N.
|
|
+ * Keep the pins' function used for chip select(CS) here according to your
|
|
+ * system to avoid chip select crashing with sdram when resuming from sleep mode.
|
|
+ */
|
|
+
|
|
+#if defined(CONFIG_JZ4750_APUS)
|
|
+ /* GPB25/CS1_N is used as chip select for nand flash, shouldn't be change. */
|
|
+
|
|
+ /* GPB26/CS2_N is connected to nand flash, needn't be changed. */
|
|
+
|
|
+ /* GPB28/CS3_N is used as cs8900's chip select, shouldn't be changed. */
|
|
+
|
|
+ /* GPB27/CS4_N is used as NOR's chip select, shouldn't be changed. */
|
|
+#endif
|
|
+
|
|
+ /*
|
|
+ * Enable pull for NC pins here according to your system
|
|
+ */
|
|
+
|
|
+#if defined(CONFIG_JZ4750_APUS)
|
|
+#endif
|
|
+
|
|
+ /*
|
|
+ * If you must set some GPIOs as output to high level or low level,
|
|
+ * you can set them here, using:
|
|
+ * __gpio_as_output(n);
|
|
+ * __gpio_set_pin(n); or __gpio_clear_pin(n);
|
|
+ */
|
|
+
|
|
+#if defined(CONFIG_JZ4750_APUS)
|
|
+ /* GPC7 which is used as AMPEN_N should be set to high to disable audio amplifier */
|
|
+ __gpio_as_output(32*2+7);
|
|
+ __gpio_set_pin(32*2+7);
|
|
+#endif
|
|
+
|
|
+#ifdef DEBUG
|
|
+ /* Keep uart function for printing debug message */
|
|
+ __gpio_as_uart0();
|
|
+ __gpio_as_uart1();
|
|
+ __gpio_as_uart2();
|
|
+ __gpio_as_uart3();
|
|
+
|
|
+ /* Print messages of GPIO registers for debug */
|
|
+ for(i=0;i<GPIO_PORT_NUM;i++) {
|
|
+ dprintk("sleep dat:%x pin:%x fun:%x sel:%x dir:%x pull:%x msk:%x trg:%x\n", \
|
|
+ REG_GPIO_PXDAT(i),REG_GPIO_PXPIN(i),REG_GPIO_PXFUN(i),REG_GPIO_PXSEL(i), \
|
|
+ REG_GPIO_PXDIR(i),REG_GPIO_PXPE(i),REG_GPIO_PXIM(i),REG_GPIO_PXTRG(i));
|
|
+ }
|
|
+#endif
|
|
+}
|
|
+
|
|
+static void jz_board_do_resume(unsigned long *ptr)
|
|
+{
|
|
+ unsigned char i;
|
|
+
|
|
+ /* Restore GPIO registers */
|
|
+ for(i = 1; i < GPIO_PORT_NUM; i++) {
|
|
+ REG_GPIO_PXFUNS(i) = *ptr;
|
|
+ REG_GPIO_PXFUNC(i) = ~(*ptr++);
|
|
+
|
|
+ REG_GPIO_PXSELS(i) = *ptr;
|
|
+ REG_GPIO_PXSELC(i) = ~(*ptr++);
|
|
+
|
|
+ REG_GPIO_PXDIRS(i) = *ptr;
|
|
+ REG_GPIO_PXDIRC(i) = ~(*ptr++);
|
|
+
|
|
+ REG_GPIO_PXPES(i) = *ptr;
|
|
+ REG_GPIO_PXPEC(i) = ~(*ptr++);
|
|
+
|
|
+ REG_GPIO_PXIMS(i)=*ptr;
|
|
+ REG_GPIO_PXIMC(i)=~(*ptr++);
|
|
+
|
|
+ REG_GPIO_PXDATS(i)=*ptr;
|
|
+ REG_GPIO_PXDATC(i)=~(*ptr++);
|
|
+
|
|
+ REG_GPIO_PXTRGS(i)=*ptr;
|
|
+ REG_GPIO_PXTRGC(i)=~(*ptr++);
|
|
+ }
|
|
+
|
|
+ /* Print messages of GPIO registers for debug */
|
|
+ for(i=0;i<GPIO_PORT_NUM;i++) {
|
|
+ dprintk("resume dat:%x pin:%x fun:%x sel:%x dir:%x pull:%x msk:%x trg:%x\n", \
|
|
+ REG_GPIO_PXDAT(i),REG_GPIO_PXPIN(i),REG_GPIO_PXFUN(i),REG_GPIO_PXSEL(i), \
|
|
+ REG_GPIO_PXDIR(i),REG_GPIO_PXPE(i),REG_GPIO_PXIM(i),REG_GPIO_PXTRG(i));
|
|
+ }
|
|
+}
|
|
+
|
|
+
|
|
+
|
|
+static int jz_pm_do_sleep(void)
|
|
+{
|
|
+ unsigned long delta;
|
|
+ unsigned long nfcsr = REG_EMC_NFCSR;
|
|
+ unsigned long opcr = REG_CPM_OPCR;
|
|
+ unsigned long imr = REG_INTC_IMR;
|
|
+ unsigned long sadc = REG_SADC_ENA;
|
|
+ unsigned long sleep_gpio_save[7*(GPIO_PORT_NUM-1)];
|
|
+
|
|
+ printk("Put CPU into sleep mode.\n");
|
|
+
|
|
+ /* Preserve current time */
|
|
+ delta = xtime.tv_sec - REG_RTC_RSR;
|
|
+
|
|
+ /* Disable nand flash */
|
|
+ REG_EMC_NFCSR = ~0xff;
|
|
+
|
|
+ /* stop sadc */
|
|
+ REG_SADC_ENA &= ~0x7;
|
|
+ while((REG_SADC_ENA & 0x7) != 0);
|
|
+ udelay(100);
|
|
+
|
|
+ /*stop udc and usb*/
|
|
+ __cpm_suspend_uhcphy();
|
|
+ __cpm_suspend_udcphy();
|
|
+
|
|
+ /* Sleep on-board modules */
|
|
+ jz_board_do_sleep(sleep_gpio_save);
|
|
+
|
|
+ /* Mask all interrupts */
|
|
+ REG_INTC_IMSR = 0xffffffff;
|
|
+
|
|
+ /* Just allow following interrupts to wakeup the system.
|
|
+ * Note: modify this according to your system.
|
|
+ */
|
|
+
|
|
+ /* enable RTC alarm */
|
|
+ __intc_unmask_irq(IRQ_RTC);
|
|
+#if 0
|
|
+ /* make system wake up after n seconds by RTC alarm */
|
|
+ unsigned int v, n;
|
|
+ n = 10;
|
|
+ while (!__rtc_write_ready());
|
|
+ __rtc_enable_alarm();
|
|
+ while (!__rtc_write_ready());
|
|
+ __rtc_enable_alarm_irq();
|
|
+ while (!__rtc_write_ready());
|
|
+ v = __rtc_get_second();
|
|
+ while (!__rtc_write_ready());
|
|
+ __rtc_set_alarm_second(v+n);
|
|
+#endif
|
|
+
|
|
+ /* WAKEUP key */
|
|
+ __gpio_as_irq_rise_edge(GPIO_WAKEUP);
|
|
+ __gpio_unmask_irq(GPIO_WAKEUP);
|
|
+ __intc_unmask_irq(IRQ_GPIO0 - (GPIO_WAKEUP/32)); /* unmask IRQ_GPIOn depends on GPIO_WAKEUP */
|
|
+
|
|
+ /* disable externel clock Oscillator in sleep mode */
|
|
+ __cpm_disable_osc_in_sleep();
|
|
+ /* select 32K crystal as RTC clock in sleep mode */
|
|
+ __cpm_select_rtcclk_rtc();
|
|
+
|
|
+ /* Enter SLEEP mode */
|
|
+ REG_CPM_LCR &= ~CPM_LCR_LPM_MASK;
|
|
+ REG_CPM_LCR |= CPM_LCR_LPM_SLEEP;
|
|
+ __asm__(".set\tmips3\n\t"
|
|
+ "wait\n\t"
|
|
+ ".set\tmips0");
|
|
+
|
|
+ /* Restore to IDLE mode */
|
|
+ REG_CPM_LCR &= ~CPM_LCR_LPM_MASK;
|
|
+ REG_CPM_LCR |= CPM_LCR_LPM_IDLE;
|
|
+
|
|
+ /* Restore nand flash control register */
|
|
+ REG_EMC_NFCSR = nfcsr;
|
|
+
|
|
+ /* Restore interrupts */
|
|
+ REG_INTC_IMSR = imr;
|
|
+ REG_INTC_IMCR = ~imr;
|
|
+
|
|
+ /* Restore sadc */
|
|
+ REG_SADC_ENA = sadc;
|
|
+
|
|
+ /* Resume on-board modules */
|
|
+ jz_board_do_resume(sleep_gpio_save);
|
|
+
|
|
+ /* Restore Oscillator and Power Control Register */
|
|
+ REG_CPM_OPCR = opcr;
|
|
+
|
|
+ /* Restore current time */
|
|
+ xtime.tv_sec = REG_RTC_RSR + delta;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/* Put CPU to HIBERNATE mode */
|
|
+int jz_pm_hibernate(void)
|
|
+{
|
|
+ return jz_pm_do_hibernate();
|
|
+}
|
|
+
|
|
+#ifndef CONFIG_JZ_POWEROFF
|
|
+static irqreturn_t pm_irq_handler (int irq, void *dev_id)
|
|
+{
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+#endif
|
|
+
|
|
+/* Put CPU to SLEEP mode */
|
|
+int jz_pm_sleep(void)
|
|
+{
|
|
+ int retval;
|
|
+
|
|
+#ifndef CONFIG_JZ_POWEROFF
|
|
+ if ((retval = request_irq (IRQ_GPIO_0 + GPIO_WAKEUP, pm_irq_handler, IRQF_DISABLED,
|
|
+ "PM", NULL))) {
|
|
+ printk ("PM could not get IRQ for GPIO_WAKEUP\n");
|
|
+ return retval;
|
|
+ }
|
|
+#endif
|
|
+
|
|
+ pm_send_all(PM_SUSPEND, (void *)3);
|
|
+ retval = jz_pm_do_sleep();
|
|
+ pm_send_all(PM_RESUME, (void *)0);
|
|
+
|
|
+#ifndef CONFIG_JZ_POWEROFF
|
|
+ free_irq (IRQ_GPIO_0 + GPIO_WAKEUP, NULL);
|
|
+#endif
|
|
+
|
|
+ return retval;
|
|
+}
|
|
+
|
|
+#if 0
|
|
+/* Deprecated ,was used by dpm */
|
|
+void jz_pm_idle(void)
|
|
+{
|
|
+ local_irq_disable();
|
|
+ if (!need_resched()) {
|
|
+ local_irq_enable();
|
|
+ cpu_wait();
|
|
+ }
|
|
+}
|
|
+#endif
|
|
+
|
|
+
|
|
+#ifdef CONFIG_SYSCTL
|
|
+
|
|
+/*
|
|
+ * Use a temporary sysctl number. Horrid, but will be cleaned up in 2.6
|
|
+ * when all the PM interfaces exist nicely.
|
|
+ */
|
|
+#define CTL_PM_SUSPEND 1
|
|
+#define CTL_PM_HIBERNATE 2
|
|
+
|
|
+/*----------------------------------------------------------------------------
|
|
+ * Power Management sleep sysctl proc interface
|
|
+ *
|
|
+ * A write to /proc/sys/pm/suspend invokes this function
|
|
+ * which initiates a sleep.
|
|
+ *--------------------------------------------------------------------------*/
|
|
+static int sysctl_jz_pm_sleep(void)
|
|
+{
|
|
+ return jz_pm_sleep();
|
|
+}
|
|
+
|
|
+/*----------------------------------------------------------------------------
|
|
+ * Power Management sleep sysctl proc interface
|
|
+ *
|
|
+ * A write to /proc/sys/pm/hibernate invokes this function
|
|
+ * which initiates a poweroff.
|
|
+ *--------------------------------------------------------------------------*/
|
|
+static int sysctl_jz_pm_hibernate(void)
|
|
+{
|
|
+ return jz_pm_hibernate();
|
|
+}
|
|
+
|
|
+static struct ctl_table pm_table[] =
|
|
+{
|
|
+ {
|
|
+ .ctl_name = CTL_UNNUMBERED,
|
|
+ .procname = "suspend",
|
|
+ .data = NULL,
|
|
+ .maxlen = 0,
|
|
+ .mode = 0600,
|
|
+ .proc_handler = &sysctl_jz_pm_sleep,
|
|
+ },
|
|
+ {
|
|
+ .ctl_name = CTL_UNNUMBERED,
|
|
+ .procname = "hibernate",
|
|
+ .data = NULL,
|
|
+ .maxlen = 0,
|
|
+ .mode = 0600,
|
|
+ .proc_handler = &sysctl_jz_pm_hibernate,
|
|
+ },
|
|
+ { .ctl_name = 0}
|
|
+};
|
|
+
|
|
+static struct ctl_table pm_dir_table[] =
|
|
+{
|
|
+ {
|
|
+ .ctl_name = CTL_UNNUMBERED,
|
|
+ .procname = "pm",
|
|
+ .mode = 0555,
|
|
+ .child = pm_table,
|
|
+ },
|
|
+ { .ctl_name = 0}
|
|
+};
|
|
+
|
|
+#endif /* CONFIG_SYSCTL */
|
|
+
|
|
+/*
|
|
+ * Initialize power interface
|
|
+ */
|
|
+static int __init jz_pm_init(void)
|
|
+{
|
|
+ printk("Power Management for JZ\n");
|
|
+
|
|
+#ifdef CONFIG_SYSCTL
|
|
+ register_sysctl_table(pm_dir_table);
|
|
+#endif
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+module_init(jz_pm_init);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750/proc.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750/proc.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,905 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4750/proc.c
|
|
+ *
|
|
+ * /proc/jz/ procfs for jz4750 on-chip modules.
|
|
+ *
|
|
+ * Copyright (C) 2006 Ingenic Semiconductor Inc.
|
|
+ * Author: <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can distribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License (Version 2) as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ * This program is distributed in the hope it will be useful, but WITHOUT
|
|
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
+ * for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License along
|
|
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
|
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
|
|
+ *
|
|
+ */
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/irq.h>
|
|
+#include <linux/sysctl.h>
|
|
+#include <linux/proc_fs.h>
|
|
+#include <linux/page-flags.h>
|
|
+#include <asm/uaccess.h>
|
|
+#include <asm/pgtable.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+//#define DEBUG 1
|
|
+#undef DEBUG
|
|
+
|
|
+
|
|
+struct proc_dir_entry *proc_jz_root;
|
|
+
|
|
+
|
|
+/*
|
|
+ * EMC Modules
|
|
+ */
|
|
+static int emc_read_proc (char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+
|
|
+ len += sprintf (page+len, "SMCR(0-5): 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", REG_EMC_SMCR0, REG_EMC_SMCR1, REG_EMC_SMCR2, REG_EMC_SMCR3, REG_EMC_SMCR4);
|
|
+ len += sprintf (page+len, "SACR(0-5): 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", REG_EMC_SACR0, REG_EMC_SACR1, REG_EMC_SACR2, REG_EMC_SACR3, REG_EMC_SACR4);
|
|
+ len += sprintf (page+len, "DMCR: 0x%08x\n", REG_EMC_DMCR);
|
|
+ len += sprintf (page+len, "RTCSR: 0x%04x\n", REG_EMC_RTCSR);
|
|
+ len += sprintf (page+len, "RTCOR: 0x%04x\n", REG_EMC_RTCOR);
|
|
+ return len;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Power Manager Module
|
|
+ */
|
|
+static int pmc_read_proc (char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+ unsigned long lcr = REG_CPM_LCR;
|
|
+ unsigned long clkgr = REG_CPM_CLKGR;
|
|
+
|
|
+ len += sprintf (page+len, "Low Power Mode : %s\n",
|
|
+ ((lcr & CPM_LCR_LPM_MASK) == (CPM_LCR_LPM_IDLE)) ?
|
|
+ "IDLE" : (((lcr & CPM_LCR_LPM_MASK) == (CPM_LCR_LPM_SLEEP)) ?
|
|
+ "SLEEP" : "HIBERNATE"));
|
|
+ len += sprintf (page+len, "Doze Mode : %s\n",
|
|
+ (lcr & CPM_LCR_DOZE_ON) ? "on" : "off");
|
|
+ if (lcr & CPM_LCR_DOZE_ON)
|
|
+ len += sprintf (page+len, " duty : %d\n", (int)((lcr & CPM_LCR_DOZE_DUTY_MASK) >> CPM_LCR_DOZE_DUTY_BIT));
|
|
+ len += sprintf (page+len, "IPU : %s\n",
|
|
+ (clkgr & CPM_CLKGR_IPU) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "DMAC : %s\n",
|
|
+ (clkgr & CPM_CLKGR_DMAC) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "UHC : %s\n",
|
|
+ (clkgr & CPM_CLKGR_UHC) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "UDC : %s\n",
|
|
+ (clkgr & CPM_CLKGR_UDC) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "LCD : %s\n",
|
|
+ (clkgr & CPM_CLKGR_LCD) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "CIM : %s\n",
|
|
+ (clkgr & CPM_CLKGR_CIM) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "SADC : %s\n",
|
|
+ (clkgr & CPM_CLKGR_SADC) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "MSC0 : %s\n",
|
|
+ (clkgr & CPM_CLKGR_MSC0) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "MSC1 : %s\n",
|
|
+ (clkgr & CPM_CLKGR_MSC1) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "AIC1 : %s\n",
|
|
+ (clkgr & CPM_CLKGR_AIC1) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "AIC2 : %s\n",
|
|
+ (clkgr & CPM_CLKGR_AIC2) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "SSI0 : %s\n",
|
|
+ (clkgr & CPM_CLKGR_SSI0) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "SSI1 : %s\n",
|
|
+ (clkgr & CPM_CLKGR_SSI1) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "I2C : %s\n",
|
|
+ (clkgr & CPM_CLKGR_I2C) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "RTC : %s\n",
|
|
+ (clkgr & CPM_CLKGR_RTC) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "TCU : %s\n",
|
|
+ (clkgr & CPM_CLKGR_TCU) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "UART1 : %s\n",
|
|
+ (clkgr & CPM_CLKGR_UART1) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "UART0 : %s\n",
|
|
+ (clkgr & CPM_CLKGR_UART0) ? "stopped" : "running");
|
|
+ return len;
|
|
+}
|
|
+
|
|
+static int pmc_write_proc(struct file *file, const char *buffer, unsigned long count, void *data)
|
|
+{
|
|
+ REG_CPM_CLKGR = simple_strtoul(buffer, 0, 16);
|
|
+ return count;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Clock Generation Module
|
|
+ */
|
|
+#define TO_MHZ(x) (x/1000000),(x%1000000)/10000
|
|
+#define TO_KHZ(x) (x/1000),(x%1000)/10
|
|
+
|
|
+static int cgm_read_proc (char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+ unsigned int cppcr = REG_CPM_CPPCR; /* PLL Control Register */
|
|
+ unsigned int cpccr = REG_CPM_CPCCR; /* Clock Control Register */
|
|
+ unsigned int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
|
|
+ unsigned int od[4] = {1, 2, 2, 4};
|
|
+
|
|
+ len += sprintf (page+len, "CPPCR : 0x%08x\n", cppcr);
|
|
+ len += sprintf (page+len, "CPCCR : 0x%08x\n", cpccr);
|
|
+ len += sprintf (page+len, "PLL : %s\n",
|
|
+ (cppcr & CPM_CPPCR_PLLEN) ? "ON" : "OFF");
|
|
+ len += sprintf (page+len, "m:n:o : %d:%d:%d\n",
|
|
+ __cpm_get_pllm() + 2,
|
|
+ __cpm_get_plln() + 2,
|
|
+ od[__cpm_get_pllod()]
|
|
+ );
|
|
+ len += sprintf (page+len, "C:H:M:P : %d:%d:%d:%d\n",
|
|
+ div[__cpm_get_cdiv()],
|
|
+ div[__cpm_get_hdiv()],
|
|
+ div[__cpm_get_mdiv()],
|
|
+ div[__cpm_get_pdiv()]
|
|
+ );
|
|
+ len += sprintf (page+len, "PLL Freq : %3d.%02d MHz\n", TO_MHZ(__cpm_get_pllout()));
|
|
+ len += sprintf (page+len, "CCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_cclk()));
|
|
+ len += sprintf (page+len, "HCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_hclk()));
|
|
+ len += sprintf (page+len, "MCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_mclk()));
|
|
+ len += sprintf (page+len, "PCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_pclk()));
|
|
+ len += sprintf (page+len, "LCDCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_lcdclk()));
|
|
+ len += sprintf (page+len, "PIXCLK : %3d.%02d KHz\n", TO_KHZ(__cpm_get_pixclk()));
|
|
+ len += sprintf (page+len, "I2SCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_i2sclk()));
|
|
+ len += sprintf (page+len, "USBCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_usbclk()));
|
|
+ len += sprintf (page+len, "MSC0CLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_mscclk(0)));
|
|
+ len += sprintf (page+len, "MSC1CLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_mscclk(1)));
|
|
+ len += sprintf (page+len, "EXTALCLK0 : %3d.%02d MHz\n", TO_MHZ(__cpm_get_extalclk0()));
|
|
+ len += sprintf (page+len, "EXTALCLK(by CPM): %3d.%02d MHz\n", TO_MHZ(__cpm_get_extalclk()));
|
|
+ len += sprintf (page+len, "RTCCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_rtcclk()));
|
|
+
|
|
+ return len;
|
|
+}
|
|
+
|
|
+static int cgm_write_proc(struct file *file, const char *buffer, unsigned long count, void *data)
|
|
+{
|
|
+ REG_CPM_CPCCR = simple_strtoul(buffer, 0, 16);
|
|
+ return count;
|
|
+}
|
|
+
|
|
+
|
|
+/* USAGE:
|
|
+ * echo n > /proc/jz/ipu // n = [1,...,9], alloc mem, 2^n pages.
|
|
+ * echo FF > /proc/jz/ipu // 255, free all buffer
|
|
+ * echo xxxx > /proc/jz/ipu // free buffer which addr is xxxx
|
|
+ * echo llll > /proc/jz/ipu // add_wired_entry(l,l,l,l)
|
|
+ * echo 0 > /proc/jz/ipu // debug, print ipu_buf
|
|
+ * od -X /proc/jz/ipu // read mem addr
|
|
+ */
|
|
+
|
|
+typedef struct _ipu_buf {
|
|
+ unsigned int addr; /* phys addr */
|
|
+ unsigned int page_shift;
|
|
+} ipu_buf_t;
|
|
+
|
|
+#define IPU_BUF_MAX 4 /* 4 buffers */
|
|
+
|
|
+static struct _ipu_buf ipu_buf[IPU_BUF_MAX];
|
|
+static int ipu_buf_cnt = 0;
|
|
+static unsigned char g_asid=0;
|
|
+
|
|
+extern void local_flush_tlb_all(void);
|
|
+
|
|
+/* CP0 hazard avoidance. */
|
|
+#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \
|
|
+ "nop; nop; nop; nop; nop; nop;\n\t" \
|
|
+ ".set reorder\n\t")
|
|
+void show_tlb(void)
|
|
+{
|
|
+#define ASID_MASK 0xFF
|
|
+
|
|
+ unsigned long flags;
|
|
+ unsigned int old_ctx;
|
|
+ unsigned int entry;
|
|
+ unsigned int entrylo0, entrylo1, entryhi;
|
|
+ unsigned int pagemask;
|
|
+
|
|
+ local_irq_save(flags);
|
|
+
|
|
+ /* Save old context */
|
|
+ old_ctx = (read_c0_entryhi() & 0xff);
|
|
+
|
|
+ printk("TLB content:\n");
|
|
+ entry = 0;
|
|
+ while(entry < 32) {
|
|
+ write_c0_index(entry);
|
|
+ BARRIER;
|
|
+ tlb_read();
|
|
+ BARRIER;
|
|
+ entryhi = read_c0_entryhi();
|
|
+ entrylo0 = read_c0_entrylo0();
|
|
+ entrylo1 = read_c0_entrylo1();
|
|
+ pagemask = read_c0_pagemask();
|
|
+ printk("%02d: ASID=%02d%s VA=0x%08x ", entry, entryhi & ASID_MASK, (entrylo0 & entrylo1 & 1) ? "(G)" : " ", entryhi & ~ASID_MASK);
|
|
+ printk("PA0=0x%08x C0=%x %s%s%s\n", (entrylo0>>6)<<12, (entrylo0>>3) & 7, (entrylo0 & 4) ? "Dirty " : "", (entrylo0 & 2) ? "Valid " : "Invalid ", (entrylo0 & 1) ? "Global" : "");
|
|
+ printk("\t\t\t PA1=0x%08x C1=%x %s%s%s\n", (entrylo1>>6)<<12, (entrylo1>>3) & 7, (entrylo1 & 4) ? "Dirty " : "", (entrylo1 & 2) ? "Valid " : "Invalid ", (entrylo1 & 1) ? "Global" : "");
|
|
+
|
|
+ printk("\t\tpagemask=0x%08x", pagemask);
|
|
+ printk("\tentryhi=0x%08x\n", entryhi);
|
|
+ printk("\t\tentrylo0=0x%08x", entrylo0);
|
|
+ printk("\tentrylo1=0x%08x\n", entrylo1);
|
|
+
|
|
+ entry++;
|
|
+ }
|
|
+ BARRIER;
|
|
+ write_c0_entryhi(old_ctx);
|
|
+
|
|
+ local_irq_restore(flags);
|
|
+}
|
|
+
|
|
+static void ipu_add_wired_entry(unsigned long pid,
|
|
+ unsigned long entrylo0, unsigned long entrylo1,
|
|
+ unsigned long entryhi, unsigned long pagemask)
|
|
+{
|
|
+ unsigned long flags;
|
|
+ unsigned long wired;
|
|
+ unsigned long old_pagemask;
|
|
+ unsigned long old_ctx;
|
|
+ struct task_struct *g, *p;
|
|
+
|
|
+ /* We will lock an 4MB page size entry to map the 4MB reserved IPU memory */
|
|
+ entrylo0 = entrylo0 >> 6;
|
|
+ entrylo0 |= 0x6 | (0 << 3);
|
|
+ /*entrylo0 |= 0x6 | (1 << 3);*/
|
|
+
|
|
+ do_each_thread(g, p) {
|
|
+ if (p->pid == pid )
|
|
+ g_asid = p->mm->context[0];
|
|
+ } while_each_thread(g, p);
|
|
+
|
|
+ local_irq_save(flags);
|
|
+ /* Save old context and create impossible VPN2 value */
|
|
+ old_ctx = read_c0_entryhi() & 0xff;
|
|
+ old_pagemask = read_c0_pagemask();
|
|
+ wired = read_c0_wired();
|
|
+ write_c0_wired(wired + 1);
|
|
+ write_c0_index(wired);
|
|
+ BARRIER;
|
|
+ entryhi &= ~0xff; /* new add, 20070906 */
|
|
+ entryhi |= g_asid; /* new add, 20070906 */
|
|
+// entryhi |= old_ctx; /* new add, 20070906 */
|
|
+ write_c0_pagemask(pagemask);
|
|
+ write_c0_entryhi(entryhi);
|
|
+ write_c0_entrylo0(entrylo0);
|
|
+ write_c0_entrylo1(entrylo1);
|
|
+ BARRIER;
|
|
+ tlb_write_indexed();
|
|
+ BARRIER;
|
|
+
|
|
+ write_c0_entryhi(old_ctx);
|
|
+ BARRIER;
|
|
+ write_c0_pagemask(old_pagemask);
|
|
+ local_flush_tlb_all();
|
|
+ local_irq_restore(flags);
|
|
+#if defined(DEBUG)
|
|
+ printk("\nold_ctx=%03d\n", old_ctx);
|
|
+
|
|
+ show_tlb();
|
|
+#endif
|
|
+}
|
|
+
|
|
+static void ipu_del_wired_entry( void )
|
|
+{
|
|
+ unsigned long flags;
|
|
+ unsigned long wired;
|
|
+
|
|
+ local_irq_save(flags);
|
|
+ wired = read_c0_wired();
|
|
+ if (wired) {
|
|
+ write_c0_wired(0);
|
|
+ }
|
|
+ local_irq_restore(flags);
|
|
+}
|
|
+
|
|
+static inline void ipu_buf_get( unsigned int page_shift )
|
|
+{
|
|
+ unsigned char * virt_addr;
|
|
+ int i;
|
|
+ for ( i=0; i< IPU_BUF_MAX; ++i ) {
|
|
+ if ( ipu_buf[i].addr == 0 ) {
|
|
+ break;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ if ( (ipu_buf_cnt = i) == IPU_BUF_MAX ) {
|
|
+ printk("Error, no free ipu buffer.\n");
|
|
+ return ;
|
|
+ }
|
|
+
|
|
+ virt_addr = (unsigned char *)__get_free_pages(GFP_KERNEL, page_shift);
|
|
+
|
|
+ if ( virt_addr ) {
|
|
+ ipu_buf[ipu_buf_cnt].addr = (unsigned int)virt_to_phys((void *)virt_addr);
|
|
+ ipu_buf[ipu_buf_cnt].page_shift = page_shift;
|
|
+
|
|
+ for (i = 0; i < (1<<page_shift); i++) {
|
|
+ SetPageReserved(virt_to_page(virt_addr));
|
|
+ virt_addr += PAGE_SIZE;
|
|
+ }
|
|
+ }
|
|
+ else {
|
|
+ printk("get memory Failed.\n");
|
|
+ }
|
|
+}
|
|
+
|
|
+static inline void ipu_buf_free( unsigned int phys_addr )
|
|
+{
|
|
+ unsigned char * virt_addr, *addr;
|
|
+ int cnt, i;
|
|
+
|
|
+ if ( phys_addr == 0 )
|
|
+ return ;
|
|
+
|
|
+ for ( cnt=0; cnt<IPU_BUF_MAX; ++cnt )
|
|
+ if ( phys_addr == ipu_buf[cnt].addr )
|
|
+ break;
|
|
+
|
|
+ if ( cnt == IPU_BUF_MAX ) { /* addr not in the ipu buffers */
|
|
+ printk("Invalid addr:0x%08x\n", (unsigned int)phys_addr);
|
|
+ }
|
|
+
|
|
+ virt_addr = (unsigned char *)phys_to_virt(ipu_buf[cnt].addr);
|
|
+ addr = virt_addr;
|
|
+ for (i = 0; i < (1<<ipu_buf[cnt].page_shift); i++) {
|
|
+ ClearPageReserved(virt_to_page(addr));
|
|
+ addr += PAGE_SIZE;
|
|
+ }
|
|
+
|
|
+ if ( cnt == 0 )
|
|
+ ipu_del_wired_entry();
|
|
+
|
|
+ free_pages((unsigned long )virt_addr, ipu_buf[cnt].page_shift);
|
|
+
|
|
+ ipu_buf[cnt].addr = 0;
|
|
+ ipu_buf[cnt].page_shift = 0;
|
|
+}
|
|
+
|
|
+static int tlb_read_proc (char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ show_tlb();
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int ipu_read_proc (char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+
|
|
+ /* read as binary */
|
|
+ unsigned int * pint;
|
|
+ pint = (unsigned int *) (page+len);
|
|
+
|
|
+ if ( ipu_buf_cnt >= IPU_BUF_MAX ) { /* failed alloc mem, rturn 0 */
|
|
+ printk("no free buffer.\n");
|
|
+ *pint = 0;
|
|
+ }
|
|
+ else
|
|
+ *pint = (unsigned int )ipu_buf[ipu_buf_cnt].addr; /* phys addr */
|
|
+ len += sizeof(unsigned int);
|
|
+
|
|
+#if defined(DEBUG)
|
|
+ show_tlb();
|
|
+#endif
|
|
+ return len;
|
|
+
|
|
+}
|
|
+
|
|
+static int ipu_write_proc(struct file *file, const char *buffer, unsigned long count, void *data)
|
|
+{
|
|
+ unsigned int val ;
|
|
+ int cnt,i;
|
|
+ char buf[12];
|
|
+ unsigned long pid, entrylo0, entrylo1, entryhi, pagemask;
|
|
+#if defined(DEBUG)
|
|
+ printk("ipu write count=%u\n", count);
|
|
+#endif
|
|
+ if (count == 41) {
|
|
+ for (i=0;i<12;i++)
|
|
+ buf[i]=0;
|
|
+ strncpy(buf, buffer+8*0, 8);
|
|
+ pid = simple_strtoul(buf, 0, 16);
|
|
+ for (i=0;i<12;i++)
|
|
+ buf[i]=0;
|
|
+ strncpy(buf, buffer+8*1, 8);
|
|
+ entrylo0 = simple_strtoul(buf, 0, 16);
|
|
+ for (i=0;i<12;i++)
|
|
+ buf[i]=0;
|
|
+ strncpy(buf, buffer+8*2, 8);
|
|
+ entrylo1 = simple_strtoul(buf, 0, 16);
|
|
+ for (i=0;i<12;i++)
|
|
+ buf[i]=0;
|
|
+ strncpy(buf, buffer+8*3, 8);
|
|
+ entryhi = simple_strtoul(buf, 0, 16);
|
|
+ for (i=0;i<12;i++)
|
|
+ buf[i]=0;
|
|
+ strncpy(buf, buffer+8*4, 8);
|
|
+ pagemask = simple_strtoul(buf, 0, 16);
|
|
+
|
|
+#if defined(DEBUG)
|
|
+ printk("pid=0x%08x, entrylo0=0x%08x, entrylo1=0x%08x, entryhi=0x%08x, pagemask=0x%08x\n",
|
|
+ pid, entrylo0, entrylo1, entryhi, pagemask);
|
|
+#endif
|
|
+ ipu_add_wired_entry( pid, entrylo0, entrylo1, entryhi, pagemask);
|
|
+ return 41;
|
|
+ } else if ( count <= 9 ) {
|
|
+ for (i=0;i<12;i++) buf[i]=0;
|
|
+ strncpy(buf, buffer, 8);
|
|
+ val = simple_strtoul(buf, 0, 16);
|
|
+ } else if (count == 44) {
|
|
+ for (i = 0; i < 12; i++)
|
|
+ buf[i] = 0;
|
|
+ strncpy(buf, buffer, 10);
|
|
+ pid = simple_strtoul(buf, 0, 16);
|
|
+
|
|
+ for (i = 0; i < 12; i++)
|
|
+ buf[i] = 0;
|
|
+ strncpy(buf, buffer + 11, 10);
|
|
+ entryhi = simple_strtoul(buf, 0, 16);//vaddr
|
|
+
|
|
+ for (i = 0; i < 12; i++)
|
|
+ buf[i] = 0;
|
|
+ strncpy(buf, buffer + 22, 10);
|
|
+ entrylo0 = simple_strtoul(buf, 0, 16);//paddr
|
|
+
|
|
+ for (i = 0; i < 12; i++)
|
|
+ buf[i] = 0;
|
|
+ strncpy(buf, buffer + 33, 10);
|
|
+ pagemask = simple_strtoul(buf, 0, 16);
|
|
+ pagemask = 0x3ff << 13; /* Fixed to 4MB page size */
|
|
+ //pagemask = 0xfff << 13; /* Fixed to 16MB page size */
|
|
+
|
|
+ ipu_add_wired_entry(pid, entrylo0, 0, entryhi, pagemask);
|
|
+ return 44;
|
|
+ } else if (count == 12) {
|
|
+ printk("\necho release tlb > /proc/jz/ipu\n");
|
|
+ ipu_del_wired_entry();
|
|
+ return 12;
|
|
+ } else {
|
|
+ printk("ipu write count error, count=%d\n.", (unsigned int)count);
|
|
+ return -1;
|
|
+ }
|
|
+
|
|
+ /* val: 1-9, page_shift, val>= 10: ipu_buf.addr */
|
|
+ if ( val == 0 ) { /* debug, print ipu_buf info */
|
|
+ for ( cnt=0; cnt<IPU_BUF_MAX; ++cnt)
|
|
+ printk("ipu_buf[%d]: addr=0x%08x, page_shift=%d\n",
|
|
+ cnt, ipu_buf[cnt].addr, ipu_buf[cnt].page_shift );
|
|
+#if defined(DEBUG)
|
|
+ show_tlb();
|
|
+#endif
|
|
+ }
|
|
+ else if ( 0< val && val < 10 ) {
|
|
+ ipu_buf_get(val);
|
|
+ }
|
|
+ else if ( val == 0xff ) { /* 255: free all ipu_buf */
|
|
+ for ( cnt=0; cnt<IPU_BUF_MAX; ++cnt ) {
|
|
+ ipu_buf_free(ipu_buf[cnt].addr);
|
|
+ }
|
|
+ }
|
|
+ else {
|
|
+ ipu_buf_free(val);
|
|
+ }
|
|
+
|
|
+ return count;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * UDC hotplug
|
|
+ */
|
|
+#ifdef CONFIG_JZ_UDC_HOTPLUG
|
|
+extern int jz_udc_active; /* defined in drivers/char/jzchar/jz_udc_hotplug.c */
|
|
+#endif
|
|
+
|
|
+#ifndef GPIO_UDC_HOTPLUG
|
|
+#define GPIO_UDC_HOTPLUG 86
|
|
+#endif
|
|
+
|
|
+static int udc_read_proc(char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+
|
|
+ if (__gpio_get_pin(GPIO_UDC_HOTPLUG)) {
|
|
+
|
|
+#ifdef CONFIG_JZ_UDC_HOTPLUG
|
|
+
|
|
+ /* Cable has connected, wait for disconnection. */
|
|
+ __gpio_as_irq_fall_edge(GPIO_UDC_HOTPLUG);
|
|
+
|
|
+ if (jz_udc_active)
|
|
+ len += sprintf (page+len, "CONNECT_CABLE\n");
|
|
+ else
|
|
+ len += sprintf (page+len, "CONNECT_POWER\n");
|
|
+#else
|
|
+ len += sprintf (page+len, "CONNECT\n");
|
|
+#endif
|
|
+ }
|
|
+ else {
|
|
+
|
|
+#ifdef CONFIG_JZ_UDC_HOTPLUG
|
|
+ /* Cable has disconnected, wait for connection. */
|
|
+ __gpio_as_irq_rise_edge(GPIO_UDC_HOTPLUG);
|
|
+#endif
|
|
+
|
|
+ len += sprintf (page+len, "REMOVE\n");
|
|
+ }
|
|
+
|
|
+ return len;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * MMC/SD hotplug
|
|
+ */
|
|
+
|
|
+#ifndef MSC_HOTPLUG_PIN
|
|
+#define MSC_HOTPLUG_PIN 90
|
|
+#endif
|
|
+
|
|
+static int mmc_read_proc (char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+
|
|
+#if defined(CONFIG_JZ4750_LYRA)
|
|
+ if (!(__gpio_get_pin(MSC_HOTPLUG_PIN)))
|
|
+#else
|
|
+ if (__gpio_get_pin(MSC_HOTPLUG_PIN))
|
|
+#endif
|
|
+ len += sprintf (page+len, "REMOVE\n");
|
|
+ else
|
|
+ len += sprintf (page+len, "INSERT\n");
|
|
+
|
|
+ return len;
|
|
+}
|
|
+
|
|
+/***********************************************************************
|
|
+ * IPU memory management (used by mplayer and other apps)
|
|
+ *
|
|
+ * We reserved 4MB memory for IPU
|
|
+ * The memory base address is jz_ipu_framebuf
|
|
+ */
|
|
+
|
|
+/* Usage:
|
|
+ *
|
|
+ * echo n > /proc/jz/imem // n = [0,...,10], allocate memory, 2^n pages
|
|
+ * echo xxxxxxxx > /proc/jz/imem // free buffer which addr is xxxxxxxx
|
|
+ * echo FF > /proc/jz/ipu // FF, free all buffers
|
|
+ * od -X /proc/jz/imem // return the allocated buffer address and the max order of free buffer
|
|
+ */
|
|
+
|
|
+//#define DEBUG_IMEM 1
|
|
+
|
|
+#define IMEM_MAX_ORDER 10 /* max 2^10 * 4096 = 4MB */
|
|
+
|
|
+static unsigned int jz_imem_base; /* physical base address of ipu memory */
|
|
+
|
|
+static unsigned int allocated_phys_addr = 0;
|
|
+
|
|
+/*
|
|
+ * Allocated buffer list
|
|
+ */
|
|
+typedef struct imem_list {
|
|
+ unsigned int phys_start; /* physical start addr */
|
|
+ unsigned int phys_end; /* physical end addr */
|
|
+ struct imem_list *next;
|
|
+} imem_list_t;
|
|
+
|
|
+static struct imem_list *imem_list_head = NULL; /* up sorted by phys_start */
|
|
+
|
|
+#ifdef DEBUG_IMEM
|
|
+static void dump_imem_list(void)
|
|
+{
|
|
+ struct imem_list *imem;
|
|
+
|
|
+ printk("*** dump_imem_list 0x%x ***\n", (u32)imem_list_head);
|
|
+ imem = imem_list_head;
|
|
+ while (imem) {
|
|
+ printk("imem=0x%x phys_start=0x%x phys_end=0x%x next=0x%x\n", (u32)imem, imem->phys_start, imem->phys_end, (u32)imem->next);
|
|
+ imem = imem->next;
|
|
+ }
|
|
+}
|
|
+#endif
|
|
+
|
|
+/* allocate 2^order pages inside the 4MB memory */
|
|
+static int imem_alloc(unsigned int order)
|
|
+{
|
|
+ int alloc_ok = 0;
|
|
+ unsigned int start, end;
|
|
+ unsigned int size = (1 << order) * PAGE_SIZE;
|
|
+ struct imem_list *imem, *imemn, *imemp;
|
|
+
|
|
+ allocated_phys_addr = 0;
|
|
+
|
|
+ start = jz_imem_base;
|
|
+ end = start + (1 << IMEM_MAX_ORDER) * PAGE_SIZE;
|
|
+
|
|
+ imem = imem_list_head;
|
|
+ while (imem) {
|
|
+ if ((imem->phys_start - start) >= size) {
|
|
+ /* we got a valid address range */
|
|
+ alloc_ok = 1;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ start = imem->phys_end + 1;
|
|
+ imem = imem->next;
|
|
+ }
|
|
+
|
|
+ if (!alloc_ok) {
|
|
+ if ((end - start) >= size)
|
|
+ alloc_ok = 1;
|
|
+ }
|
|
+
|
|
+ if (alloc_ok) {
|
|
+ end = start + size - 1;
|
|
+ allocated_phys_addr = start;
|
|
+
|
|
+ /* add to imem_list, up sorted by phys_start */
|
|
+ imemn = kmalloc(sizeof(struct imem_list), GFP_KERNEL);
|
|
+ if (!imemn) {
|
|
+ return -ENOMEM;
|
|
+ }
|
|
+ imemn->phys_start = start;
|
|
+ imemn->phys_end = end;
|
|
+ imemn->next = NULL;
|
|
+
|
|
+ if (!imem_list_head)
|
|
+ imem_list_head = imemn;
|
|
+ else {
|
|
+ imem = imemp = imem_list_head;
|
|
+ while (imem) {
|
|
+ if (start < imem->phys_start) {
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ imemp = imem;
|
|
+ imem = imem->next;
|
|
+ }
|
|
+
|
|
+ if (imem == imem_list_head) {
|
|
+ imem_list_head = imemn;
|
|
+ imemn->next = imem;
|
|
+ }
|
|
+ else {
|
|
+ imemn->next = imemp->next;
|
|
+ imemp->next = imemn;
|
|
+ }
|
|
+ }
|
|
+ }
|
|
+
|
|
+#ifdef DEBUG_IMEM
|
|
+ dump_imem_list();
|
|
+#endif
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void imem_free(unsigned int phys_addr)
|
|
+{
|
|
+ struct imem_list *imem, *imemp;
|
|
+
|
|
+ imem = imemp = imem_list_head;
|
|
+ while (imem) {
|
|
+ if (phys_addr == imem->phys_start) {
|
|
+ if (imem == imem_list_head) {
|
|
+ imem_list_head = imem->next;
|
|
+ }
|
|
+ else {
|
|
+ imemp->next = imem->next;
|
|
+ }
|
|
+
|
|
+ kfree(imem);
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ imemp = imem;
|
|
+ imem = imem->next;
|
|
+ }
|
|
+
|
|
+#ifdef DEBUG_IMEM
|
|
+ dump_imem_list();
|
|
+#endif
|
|
+}
|
|
+
|
|
+static void imem_free_all(void)
|
|
+{
|
|
+ struct imem_list *imem;
|
|
+
|
|
+ imem = imem_list_head;
|
|
+ while (imem) {
|
|
+ kfree(imem);
|
|
+ imem = imem->next;
|
|
+ }
|
|
+
|
|
+ imem_list_head = NULL;
|
|
+
|
|
+ allocated_phys_addr = 0;
|
|
+
|
|
+#ifdef DEBUG_IMEM
|
|
+ dump_imem_list();
|
|
+#endif
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Return the allocated buffer address and the max order of free buffer
|
|
+ */
|
|
+static int imem_read_proc(char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+ unsigned int start_addr, end_addr, max_order, max_size;
|
|
+ struct imem_list *imem;
|
|
+
|
|
+ unsigned int *tmp = (unsigned int *)(page + len);
|
|
+
|
|
+ start_addr = jz_imem_base;
|
|
+ end_addr = start_addr + (1 << IMEM_MAX_ORDER) * PAGE_SIZE;
|
|
+
|
|
+ if (!imem_list_head)
|
|
+ max_size = end_addr - start_addr;
|
|
+ else {
|
|
+ max_size = 0;
|
|
+ imem = imem_list_head;
|
|
+ while (imem) {
|
|
+ if (max_size < (imem->phys_start - start_addr))
|
|
+ max_size = imem->phys_start - start_addr;
|
|
+
|
|
+ start_addr = imem->phys_end + 1;
|
|
+ imem = imem->next;
|
|
+ }
|
|
+
|
|
+ if (max_size < (end_addr - start_addr))
|
|
+ max_size = end_addr - start_addr;
|
|
+ }
|
|
+
|
|
+ if (max_size > 0) {
|
|
+ max_order = get_order(max_size);
|
|
+ if (((1 << max_order) * PAGE_SIZE) > max_size)
|
|
+ max_order--;
|
|
+ }
|
|
+ else {
|
|
+ max_order = 0xffffffff; /* No any free buffer */
|
|
+ }
|
|
+
|
|
+ *tmp++ = allocated_phys_addr; /* address allocated by 'echo n > /proc/jz/imem' */
|
|
+ *tmp = max_order; /* max order of current free buffers */
|
|
+
|
|
+ len += 2 * sizeof(unsigned int);
|
|
+
|
|
+ return len;
|
|
+}
|
|
+
|
|
+static int imem_write_proc(struct file *file, const char *buffer, unsigned long count, void *data)
|
|
+{
|
|
+ unsigned int val;
|
|
+
|
|
+ val = simple_strtoul(buffer, 0, 16);
|
|
+
|
|
+ if (val == 0xff) {
|
|
+ /* free all memory */
|
|
+ imem_free_all();
|
|
+ ipu_del_wired_entry();
|
|
+ } else if ((val >= 0) && (val <= IMEM_MAX_ORDER)) {
|
|
+ /* allocate 2^val pages */
|
|
+ imem_alloc(val);
|
|
+ } else {
|
|
+ /* free buffer which phys_addr is val */
|
|
+ imem_free(val);
|
|
+ }
|
|
+
|
|
+ return count;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * /proc/jz/xxx entry
|
|
+ *
|
|
+ */
|
|
+static int __init jz_proc_init(void)
|
|
+{
|
|
+ struct proc_dir_entry *res;
|
|
+ unsigned int virt_addr, i;
|
|
+
|
|
+ proc_jz_root = proc_mkdir("jz", 0);
|
|
+
|
|
+ /* External Memory Controller */
|
|
+ res = create_proc_entry("emc", 0644, proc_jz_root);
|
|
+ if (res) {
|
|
+ res->read_proc = emc_read_proc;
|
|
+ res->write_proc = NULL;
|
|
+ res->data = NULL;
|
|
+ }
|
|
+
|
|
+ /* Power Management Controller */
|
|
+ res = create_proc_entry("pmc", 0644, proc_jz_root);
|
|
+ if (res) {
|
|
+ res->read_proc = pmc_read_proc;
|
|
+ res->write_proc = pmc_write_proc;
|
|
+ res->data = NULL;
|
|
+ }
|
|
+
|
|
+ /* Clock Generation Module */
|
|
+ res = create_proc_entry("cgm", 0644, proc_jz_root);
|
|
+ if (res) {
|
|
+ res->read_proc = cgm_read_proc;
|
|
+ res->write_proc = cgm_write_proc;
|
|
+ res->data = NULL;
|
|
+ }
|
|
+
|
|
+ /* Image process unit */
|
|
+ res = create_proc_entry("ipu", 0644, proc_jz_root);
|
|
+ if (res) {
|
|
+ res->read_proc = ipu_read_proc;
|
|
+ res->write_proc = ipu_write_proc;
|
|
+ res->data = NULL;
|
|
+ }
|
|
+
|
|
+ /* udc hotplug */
|
|
+ res = create_proc_entry("udc", 0644, proc_jz_root);
|
|
+ if (res) {
|
|
+ res->read_proc = udc_read_proc;
|
|
+ res->write_proc = NULL;
|
|
+ res->data = NULL;
|
|
+ }
|
|
+
|
|
+ /* mmc hotplug */
|
|
+ res = create_proc_entry("mmc", 0644, proc_jz_root);
|
|
+ if (res) {
|
|
+ res->read_proc = mmc_read_proc;
|
|
+ res->write_proc = NULL;
|
|
+ res->data = NULL;
|
|
+ }
|
|
+
|
|
+ /* show tlb */
|
|
+ res = create_proc_entry("tlb", 0644, proc_jz_root);
|
|
+ if (res) {
|
|
+ res->read_proc = tlb_read_proc;
|
|
+ res->write_proc = NULL;
|
|
+ res->data = NULL;
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * Reserve a 4MB memory for IPU on JZ4750.
|
|
+ */
|
|
+ jz_imem_base = (unsigned int)__get_free_pages(GFP_KERNEL, IMEM_MAX_ORDER);
|
|
+ if (jz_imem_base) {
|
|
+ /* imem (IPU memory management) */
|
|
+ res = create_proc_entry("imem", 0644, proc_jz_root);
|
|
+ if (res) {
|
|
+ res->read_proc = imem_read_proc;
|
|
+ res->write_proc = imem_write_proc;
|
|
+ res->data = NULL;
|
|
+ }
|
|
+
|
|
+ /* Set page reserved */
|
|
+ virt_addr = jz_imem_base;
|
|
+ for (i = 0; i < (1 << IMEM_MAX_ORDER); i++) {
|
|
+ SetPageReserved(virt_to_page((void *)virt_addr));
|
|
+ virt_addr += PAGE_SIZE;
|
|
+ }
|
|
+
|
|
+ /* Convert to physical address */
|
|
+ jz_imem_base = virt_to_phys((void *)jz_imem_base);
|
|
+
|
|
+ printk("Total %dMB memory at 0x%x was reserved for IPU\n",
|
|
+ (unsigned int)((1 << IMEM_MAX_ORDER) * PAGE_SIZE)/1000000, jz_imem_base);
|
|
+ } else
|
|
+ printk("NOT enough memory for imem\n");
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+__initcall(jz_proc_init);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750/prom.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750/prom.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,198 @@
|
|
+/*
|
|
+ *
|
|
+ * BRIEF MODULE DESCRIPTION
|
|
+ * PROM library initialisation code, supports YAMON and U-Boot.
|
|
+ *
|
|
+ * Copyright 2000, 2001, 2006 MontaVista Software Inc.
|
|
+ * Author: MontaVista Software, Inc.
|
|
+ * ppopov@mvista.com or source@mvista.com
|
|
+ *
|
|
+ * This file was derived from Carsten Langgaard's
|
|
+ * arch/mips/mips-boards/xx files.
|
|
+ *
|
|
+ * Carsten Langgaard, carstenl@mips.com
|
|
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License as published by the
|
|
+ * Free Software Foundation; either version 2 of the License, or (at your
|
|
+ * option) any later version.
|
|
+ *
|
|
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
|
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
|
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License along
|
|
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
|
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
+ */
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/string.h>
|
|
+
|
|
+#include <asm/bootinfo.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+/* #define DEBUG_CMDLINE */
|
|
+
|
|
+int prom_argc;
|
|
+char **prom_argv, **prom_envp;
|
|
+
|
|
+char * prom_getcmdline(void)
|
|
+{
|
|
+ return &(arcs_cmdline[0]);
|
|
+}
|
|
+
|
|
+void prom_init_cmdline(void)
|
|
+{
|
|
+ char *cp;
|
|
+ int actr;
|
|
+
|
|
+ actr = 1; /* Always ignore argv[0] */
|
|
+
|
|
+ cp = &(arcs_cmdline[0]);
|
|
+ while(actr < prom_argc) {
|
|
+ strcpy(cp, prom_argv[actr]);
|
|
+ cp += strlen(prom_argv[actr]);
|
|
+ *cp++ = ' ';
|
|
+ actr++;
|
|
+ }
|
|
+ if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
|
|
+ --cp;
|
|
+ if (prom_argc > 1)
|
|
+ *cp = '\0';
|
|
+
|
|
+}
|
|
+
|
|
+
|
|
+char *prom_getenv(char *envname)
|
|
+{
|
|
+#if 0
|
|
+ /*
|
|
+ * Return a pointer to the given environment variable.
|
|
+ * YAMON uses "name", "value" pairs, while U-Boot uses "name=value".
|
|
+ */
|
|
+
|
|
+ char **env = prom_envp;
|
|
+ int i = strlen(envname);
|
|
+ int yamon = (*env && strchr(*env, '=') == NULL);
|
|
+
|
|
+ while (*env) {
|
|
+ if (yamon) {
|
|
+ if (strcmp(envname, *env++) == 0)
|
|
+ return *env;
|
|
+ } else {
|
|
+ if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=')
|
|
+ return *env + i + 1;
|
|
+ }
|
|
+ env++;
|
|
+ }
|
|
+#endif
|
|
+ return NULL;
|
|
+}
|
|
+
|
|
+inline unsigned char str2hexnum(unsigned char c)
|
|
+{
|
|
+ if(c >= '0' && c <= '9')
|
|
+ return c - '0';
|
|
+ if(c >= 'a' && c <= 'f')
|
|
+ return c - 'a' + 10;
|
|
+ if(c >= 'A' && c <= 'F')
|
|
+ return c - 'A' + 10;
|
|
+ return 0; /* foo */
|
|
+}
|
|
+
|
|
+inline void str2eaddr(unsigned char *ea, unsigned char *str)
|
|
+{
|
|
+ int i;
|
|
+
|
|
+ for(i = 0; i < 6; i++) {
|
|
+ unsigned char num;
|
|
+
|
|
+ if((*str == '.') || (*str == ':'))
|
|
+ str++;
|
|
+ num = str2hexnum(*str++) << 4;
|
|
+ num |= (str2hexnum(*str++));
|
|
+ ea[i] = num;
|
|
+ }
|
|
+}
|
|
+
|
|
+int get_ethernet_addr(char *ethernet_addr)
|
|
+{
|
|
+ char *ethaddr_str;
|
|
+
|
|
+ ethaddr_str = prom_getenv("ethaddr");
|
|
+ if (!ethaddr_str) {
|
|
+ printk("ethaddr not set in boot prom\n");
|
|
+ return -1;
|
|
+ }
|
|
+ str2eaddr(ethernet_addr, ethaddr_str);
|
|
+
|
|
+#if 0
|
|
+ {
|
|
+ int i;
|
|
+
|
|
+ printk("get_ethernet_addr: ");
|
|
+ for (i=0; i<5; i++)
|
|
+ printk("%02x:", (unsigned char)*(ethernet_addr+i));
|
|
+ printk("%02x\n", *(ethernet_addr+i));
|
|
+ }
|
|
+#endif
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+void __init prom_free_prom_memory(void)
|
|
+{
|
|
+}
|
|
+
|
|
+void __init prom_init(void)
|
|
+{
|
|
+ unsigned char *memsize_str;
|
|
+ unsigned long memsize;
|
|
+
|
|
+ prom_argc = (int) fw_arg0;
|
|
+ prom_argv = (char **) fw_arg1;
|
|
+ prom_envp = (char **) fw_arg2;
|
|
+
|
|
+ mips_machtype = MACH_INGENIC_JZ4750;
|
|
+
|
|
+ prom_init_cmdline();
|
|
+ memsize_str = prom_getenv("memsize");
|
|
+ if (!memsize_str) {
|
|
+ memsize = 0x04000000;
|
|
+ } else {
|
|
+ memsize = simple_strtol(memsize_str, NULL, 0);
|
|
+ }
|
|
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
|
|
+}
|
|
+
|
|
+/* used by early printk */
|
|
+void prom_putchar(char c)
|
|
+{
|
|
+ volatile u8 *uart_lsr = (volatile u8 *)(UART0_BASE + OFF_LSR);
|
|
+ volatile u8 *uart_tdr = (volatile u8 *)(UART0_BASE + OFF_TDR);
|
|
+
|
|
+ /* Wait for fifo to shift out some bytes */
|
|
+ while ( !((*uart_lsr & (UARTLSR_TDRQ | UARTLSR_TEMT)) == 0x60) );
|
|
+
|
|
+ *uart_tdr = (u8)c;
|
|
+}
|
|
+
|
|
+const char *get_system_type(void)
|
|
+{
|
|
+ return "JZ4750";
|
|
+}
|
|
+
|
|
+EXPORT_SYMBOL(prom_getcmdline);
|
|
+EXPORT_SYMBOL(get_ethernet_addr);
|
|
+EXPORT_SYMBOL(str2eaddr);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750/reset.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750/reset.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,46 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4750/reset.c
|
|
+ *
|
|
+ * JZ4750 reset routines.
|
|
+ *
|
|
+ * Copyright (c) 2006-2007 Ingenic Semiconductor Inc.
|
|
+ * Author: <yliu@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+#include <linux/sched.h>
|
|
+#include <linux/mm.h>
|
|
+#include <asm/io.h>
|
|
+#include <asm/pgtable.h>
|
|
+#include <asm/processor.h>
|
|
+#include <asm/reboot.h>
|
|
+#include <asm/system.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+void jz_restart(char *command)
|
|
+{
|
|
+ printk("Restarting after 4 ms\n");
|
|
+ REG_WDT_TCSR = WDT_TCSR_PRESCALE4 | WDT_TCSR_EXT_EN;
|
|
+ REG_WDT_TCNT = 0;
|
|
+ REG_WDT_TDR = JZ_EXTAL/1000; /* reset after 4ms */
|
|
+ REG_TCU_TSCR = TCU_TSCR_WDTSC; /* enable wdt clock */
|
|
+ REG_WDT_TCER = WDT_TCER_TCEN; /* wdt start */
|
|
+ while (1);
|
|
+}
|
|
+
|
|
+void jz_halt(void)
|
|
+{
|
|
+ printk(KERN_NOTICE "\n** You can safely turn off the power\n");
|
|
+
|
|
+ while (1)
|
|
+ __asm__(".set\tmips3\n\t"
|
|
+ "wait\n\t"
|
|
+ ".set\tmips0");
|
|
+}
|
|
+
|
|
+void jz_power_off(void)
|
|
+{
|
|
+ jz_halt();
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750/setup.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750/setup.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,197 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4750/common/setup.c
|
|
+ *
|
|
+ * JZ4750 common setup routines.
|
|
+ *
|
|
+ * Copyright (C) 2006 Ingenic Semiconductor Inc.
|
|
+ *
|
|
+ * This program is free software; you can distribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License (Version 2) as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ * This program is distributed in the hope it will be useful, but WITHOUT
|
|
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
+ * for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License along
|
|
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
|
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
|
|
+ *
|
|
+ */
|
|
+#include <linux/init.h>
|
|
+#include <linux/string.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/io.h>
|
|
+#include <linux/irq.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/tty.h>
|
|
+#include <linux/serial.h>
|
|
+#include <linux/serial_core.h>
|
|
+#include <linux/serial_8250.h>
|
|
+
|
|
+#include <asm/cpu.h>
|
|
+#include <asm/bootinfo.h>
|
|
+#include <asm/irq.h>
|
|
+#include <asm/mipsregs.h>
|
|
+#include <asm/reboot.h>
|
|
+#include <asm/pgtable.h>
|
|
+#include <asm/time.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+#ifdef CONFIG_PC_KEYB
|
|
+#include <asm/keyboard.h>
|
|
+#endif
|
|
+
|
|
+jz_clocks_t jz_clocks;
|
|
+
|
|
+extern char * __init prom_getcmdline(void);
|
|
+extern void __init jz_board_setup(void);
|
|
+extern void jz_restart(char *);
|
|
+extern void jz_halt(void);
|
|
+extern void jz_power_off(void);
|
|
+extern void jz_time_init(void);
|
|
+
|
|
+static void __init sysclocks_setup(void)
|
|
+{
|
|
+#ifndef CONFIG_MIPS_JZ_EMURUS /* FPGA */
|
|
+ jz_clocks.cclk = __cpm_get_cclk();
|
|
+ jz_clocks.hclk = __cpm_get_hclk();
|
|
+ jz_clocks.pclk = __cpm_get_pclk();
|
|
+ jz_clocks.mclk = __cpm_get_mclk();
|
|
+ jz_clocks.lcdclk = __cpm_get_lcdclk();
|
|
+ jz_clocks.pixclk = __cpm_get_pixclk();
|
|
+ jz_clocks.i2sclk = __cpm_get_i2sclk();
|
|
+ jz_clocks.usbclk = __cpm_get_usbclk();
|
|
+ jz_clocks.mscclk = __cpm_get_mscclk(0);
|
|
+ jz_clocks.extalclk = __cpm_get_extalclk();
|
|
+ jz_clocks.rtcclk = __cpm_get_rtcclk();
|
|
+#else
|
|
+
|
|
+#define FPGACLK 8000000
|
|
+
|
|
+ jz_clocks.cclk = FPGACLK;
|
|
+ jz_clocks.hclk = FPGACLK;
|
|
+ jz_clocks.pclk = FPGACLK;
|
|
+ jz_clocks.mclk = FPGACLK;
|
|
+ jz_clocks.lcdclk = FPGACLK;
|
|
+ jz_clocks.pixclk = FPGACLK;
|
|
+ jz_clocks.i2sclk = FPGACLK;
|
|
+ jz_clocks.usbclk = FPGACLK;
|
|
+ jz_clocks.mscclk = FPGACLK;
|
|
+ jz_clocks.extalclk = FPGACLK;
|
|
+ jz_clocks.rtcclk = FPGACLK;
|
|
+#endif
|
|
+
|
|
+ printk("CPU clock: %dMHz, System clock: %dMHz, Peripheral clock: %dMHz, Memory clock: %dMHz\n",
|
|
+ (jz_clocks.cclk + 500000) / 1000000,
|
|
+ (jz_clocks.hclk + 500000) / 1000000,
|
|
+ (jz_clocks.pclk + 500000) / 1000000,
|
|
+ (jz_clocks.mclk + 500000) / 1000000);
|
|
+}
|
|
+
|
|
+static void __init soc_cpm_setup(void)
|
|
+{
|
|
+ /* Start all module clocks
|
|
+ */
|
|
+ __cpm_start_all();
|
|
+
|
|
+ /* Enable CKO to external memory */
|
|
+ __cpm_enable_cko();
|
|
+
|
|
+ /* CPU enters IDLE mode when executing 'wait' instruction */
|
|
+ __cpm_idle_mode();
|
|
+
|
|
+ /* Setup system clocks */
|
|
+ sysclocks_setup();
|
|
+}
|
|
+
|
|
+static void __init soc_harb_setup(void)
|
|
+{
|
|
+// __harb_set_priority(0x00); /* CIM>LCD>DMA>ETH>PCI>USB>CBB */
|
|
+// __harb_set_priority(0x03); /* LCD>CIM>DMA>ETH>PCI>USB>CBB */
|
|
+// __harb_set_priority(0x0a); /* ETH>LCD>CIM>DMA>PCI>USB>CBB */
|
|
+}
|
|
+
|
|
+static void __init soc_emc_setup(void)
|
|
+{
|
|
+}
|
|
+
|
|
+static void __init soc_dmac_setup(void)
|
|
+{
|
|
+ __dmac_enable_module(0);
|
|
+ __dmac_enable_module(1);
|
|
+}
|
|
+
|
|
+static void __init jz_soc_setup(void)
|
|
+{
|
|
+ soc_cpm_setup();
|
|
+ soc_harb_setup();
|
|
+ soc_emc_setup();
|
|
+ soc_dmac_setup();
|
|
+}
|
|
+
|
|
+static void __init jz_serial_setup(void)
|
|
+{
|
|
+#ifdef CONFIG_SERIAL_8250
|
|
+ struct uart_port s;
|
|
+ REG8(UART0_FCR) |= UARTFCR_UUE; /* enable UART module */
|
|
+ memset(&s, 0, sizeof(s));
|
|
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
|
|
+ s.iotype = SERIAL_IO_MEM;
|
|
+ s.regshift = 2;
|
|
+ s.uartclk = jz_clocks.extalclk ;
|
|
+
|
|
+ s.line = 0;
|
|
+ s.membase = (u8 *)UART0_BASE;
|
|
+ s.irq = IRQ_UART0;
|
|
+ if (early_serial_setup(&s) != 0) {
|
|
+ printk(KERN_ERR "Serial ttyS0 setup failed!\n");
|
|
+ }
|
|
+
|
|
+ s.line = 1;
|
|
+ s.membase = (u8 *)UART1_BASE;
|
|
+ s.irq = IRQ_UART1;
|
|
+ if (early_serial_setup(&s) != 0) {
|
|
+ printk(KERN_ERR "Serial ttyS1 setup failed!\n");
|
|
+ }
|
|
+
|
|
+ s.line = 2;
|
|
+ s.membase = (u8 *)UART2_BASE;
|
|
+ s.irq = IRQ_UART2;
|
|
+ if (early_serial_setup(&s) != 0) {
|
|
+ printk(KERN_ERR "Serial ttyS2 setup failed!\n");
|
|
+ }
|
|
+
|
|
+ s.line = 3;
|
|
+ s.membase = (u8 *)UART3_BASE;
|
|
+ s.irq = IRQ_UART3;
|
|
+ if (early_serial_setup(&s) != 0) {
|
|
+ printk(KERN_ERR "Serial ttyS3 setup failed!\n");
|
|
+ }
|
|
+#endif
|
|
+}
|
|
+
|
|
+void __init plat_mem_setup(void)
|
|
+{
|
|
+ char *argptr;
|
|
+
|
|
+ argptr = prom_getcmdline();
|
|
+
|
|
+ /* IO/MEM resources. Which will be the addtion value in `inX' and
|
|
+ * `outX' macros defined in asm/io.h */
|
|
+ set_io_port_base(0);
|
|
+ ioport_resource.start = 0x00000000;
|
|
+ ioport_resource.end = 0xffffffff;
|
|
+ iomem_resource.start = 0x00000000;
|
|
+ iomem_resource.end = 0xffffffff;
|
|
+
|
|
+ _machine_restart = jz_restart;
|
|
+ _machine_halt = jz_halt;
|
|
+ pm_power_off = jz_power_off;
|
|
+
|
|
+ jz_soc_setup();
|
|
+ jz_serial_setup();
|
|
+ jz_board_setup();
|
|
+}
|
|
+
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750/time.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750/time.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,156 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4750/time.c
|
|
+ *
|
|
+ * Setting up the clock on the JZ4750 boards.
|
|
+ *
|
|
+ * Copyright (C) 2008 Ingenic Semiconductor Inc.
|
|
+ * Author: <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can distribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License (Version 2) as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ * This program is distributed in the hope it will be useful, but WITHOUT
|
|
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
+ * for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License along
|
|
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
|
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
|
|
+ *
|
|
+ */
|
|
+#include <linux/types.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/time.h>
|
|
+#include <linux/clockchips.h>
|
|
+
|
|
+#include <asm/time.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+/* This is for machines which generate the exact clock. */
|
|
+
|
|
+#define JZ_TIMER_IRQ IRQ_TCU0
|
|
+
|
|
+#define JZ_TIMER_CLOCK (JZ_EXTAL>>4) /* Jz timer clock frequency */
|
|
+
|
|
+static struct clocksource clocksource_jz; /* Jz clock source */
|
|
+static struct clock_event_device jz_clockevent_device; /* Jz clock event */
|
|
+
|
|
+void (*jz_timer_callback)(void);
|
|
+
|
|
+static irqreturn_t jz_timer_interrupt(int irq, void *dev_id)
|
|
+{
|
|
+ struct clock_event_device *cd = dev_id;
|
|
+
|
|
+ REG_TCU_TFCR = TCU_TFCR_OSTFCL; /* ACK timer */
|
|
+
|
|
+ if (jz_timer_callback)
|
|
+ jz_timer_callback();
|
|
+
|
|
+ cd->event_handler(cd);
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+static struct irqaction jz_irqaction = {
|
|
+ .handler = jz_timer_interrupt,
|
|
+ .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER,
|
|
+ .name = "jz-timerirq",
|
|
+};
|
|
+
|
|
+
|
|
+cycle_t jz_get_cycles(void)
|
|
+{
|
|
+ /* convert jiffes to jz timer cycles */
|
|
+ return (cycle_t)( jiffies*((JZ_TIMER_CLOCK)/HZ) + REG_TCU_OSTCNT);
|
|
+}
|
|
+
|
|
+static struct clocksource clocksource_jz = {
|
|
+ .name = "jz_clocksource",
|
|
+ .rating = 300,
|
|
+ .read = jz_get_cycles,
|
|
+ .mask = 0xFFFFFFFF,
|
|
+ .shift = 10,
|
|
+ .flags = CLOCK_SOURCE_WATCHDOG,
|
|
+};
|
|
+
|
|
+static int __init jz_clocksource_init(void)
|
|
+{
|
|
+ clocksource_jz.mult = clocksource_hz2mult(JZ_TIMER_CLOCK, clocksource_jz.shift);
|
|
+ clocksource_register(&clocksource_jz);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int jz_set_next_event(unsigned long evt,
|
|
+ struct clock_event_device *unused)
|
|
+{
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void jz_set_mode(enum clock_event_mode mode,
|
|
+ struct clock_event_device *evt)
|
|
+{
|
|
+ switch (mode) {
|
|
+ case CLOCK_EVT_MODE_PERIODIC:
|
|
+ break;
|
|
+ case CLOCK_EVT_MODE_ONESHOT:
|
|
+ case CLOCK_EVT_MODE_UNUSED:
|
|
+ case CLOCK_EVT_MODE_SHUTDOWN:
|
|
+ break;
|
|
+ case CLOCK_EVT_MODE_RESUME:
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+static struct clock_event_device jz_clockevent_device = {
|
|
+ .name = "jz-clockenvent",
|
|
+ .features = CLOCK_EVT_FEAT_PERIODIC,
|
|
+// .features = CLOCK_EVT_FEAT_ONESHOT, /* Jz4740 not support dynamic clock now */
|
|
+
|
|
+ /* .mult, .shift, .max_delta_ns and .min_delta_ns left uninitialized */
|
|
+ .rating = 300,
|
|
+ .irq = JZ_TIMER_IRQ,
|
|
+ .set_mode = jz_set_mode,
|
|
+ .set_next_event = jz_set_next_event,
|
|
+};
|
|
+
|
|
+static void __init jz_clockevent_init(void)
|
|
+{
|
|
+ struct clock_event_device *cd = &jz_clockevent_device;
|
|
+ unsigned int cpu = smp_processor_id();
|
|
+
|
|
+ cd->cpumask = cpumask_of_cpu(cpu);
|
|
+ clockevents_register_device(cd);
|
|
+}
|
|
+
|
|
+static void __init jz_timer_setup(void)
|
|
+{
|
|
+ jz_clocksource_init(); /* init jz clock source */
|
|
+ jz_clockevent_init(); /* init jz clock event */
|
|
+
|
|
+ /*
|
|
+ * Make irqs happen for the system timer
|
|
+ */
|
|
+ jz_irqaction.dev_id = &jz_clockevent_device;
|
|
+ setup_irq(JZ_TIMER_IRQ, &jz_irqaction);
|
|
+}
|
|
+
|
|
+
|
|
+void __init plat_time_init(void)
|
|
+{
|
|
+ unsigned int latch;
|
|
+
|
|
+ /* Init timer */
|
|
+ latch = (JZ_TIMER_CLOCK + (HZ>>1)) / HZ;
|
|
+
|
|
+ REG_TCU_OSTCSR = TCU_OSTCSR_PRESCALE16 | TCU_OSTCSR_EXT_EN;
|
|
+ REG_TCU_OSTCNT = 0;
|
|
+ REG_TCU_OSTDR = latch;
|
|
+
|
|
+ REG_TCU_TMCR = TCU_TMCR_OSTMCL; /* unmask match irq */
|
|
+ REG_TCU_TSCR = TCU_TSCR_OSTSC; /* enable timer clock */
|
|
+ REG_TCU_TESR = TCU_TESR_OSTST; /* start counting up */
|
|
+
|
|
+ jz_timer_setup();
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750d/Makefile 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750d/Makefile 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,22 @@
|
|
+#
|
|
+# Makefile for the Ingenic JZ4750D.
|
|
+#
|
|
+
|
|
+# Object file lists.
|
|
+
|
|
+obj-y += prom.o irq.o time.o reset.o setup.o dma.o \
|
|
+ platform.o i2c.o
|
|
+
|
|
+obj-$(CONFIG_PROC_FS) += proc.o
|
|
+
|
|
+# board specific support
|
|
+
|
|
+obj-$(CONFIG_JZ4750D_FUWA1) += board-fuwa1.o
|
|
+
|
|
+# PM support
|
|
+
|
|
+obj-$(CONFIG_PM_LEGACY) +=pm.o
|
|
+
|
|
+# CPU Frequency scaling support
|
|
+
|
|
+obj-$(CONFIG_CPU_FREQ_JZ) +=cpufreq.o
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750d/board-fuwa1.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750d/board-fuwa1.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,72 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4750d/board-fuwa1.c
|
|
+ *
|
|
+ * JZ4750D FUWA1 board setup routines.
|
|
+ *
|
|
+ * Copyright (c) 2006-2008 Ingenic Semiconductor Inc.
|
|
+ * Author: <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/mm.h>
|
|
+#include <linux/console.h>
|
|
+#include <linux/delay.h>
|
|
+
|
|
+#include <asm/cpu.h>
|
|
+#include <asm/bootinfo.h>
|
|
+#include <asm/mipsregs.h>
|
|
+#include <asm/reboot.h>
|
|
+
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+extern void (*jz_timer_callback)(void);
|
|
+
|
|
+static void dancing(void)
|
|
+{
|
|
+ static unsigned char slash[] = "\\|/-";
|
|
+// static volatile unsigned char *p = (unsigned char *)0xb6000058;
|
|
+ static volatile unsigned char *p = (unsigned char *)0xb6000016;
|
|
+ static unsigned int count = 0;
|
|
+ *p = slash[count++];
|
|
+ count &= 3;
|
|
+}
|
|
+
|
|
+static void fuwa1_timer_callback(void)
|
|
+{
|
|
+ static unsigned long count = 0;
|
|
+
|
|
+ if ((++count) % 50 == 0) {
|
|
+ dancing();
|
|
+ count = 0;
|
|
+ }
|
|
+}
|
|
+
|
|
+static void __init board_cpm_setup(void)
|
|
+{
|
|
+ /* Stop unused module clocks here.
|
|
+ * We have started all module clocks at arch/mips/jz4750d/setup.c.
|
|
+ */
|
|
+}
|
|
+
|
|
+static void __init board_gpio_setup(void)
|
|
+{
|
|
+ /*
|
|
+ * Initialize SDRAM pins
|
|
+ */
|
|
+}
|
|
+
|
|
+void __init jz_board_setup(void)
|
|
+{
|
|
+ printk("JZ4750D FUWA1 board setup\n");
|
|
+
|
|
+ board_cpm_setup();
|
|
+ board_gpio_setup();
|
|
+
|
|
+ jz_timer_callback = fuwa1_timer_callback;
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750d/cpufreq.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750d/cpufreq.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,601 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4750d/cpufreq.c
|
|
+ *
|
|
+ * cpufreq driver for JZ4750D
|
|
+ *
|
|
+ * Copyright (c) 2006-2008 Ingenic Semiconductor Inc.
|
|
+ * Author: <lhhuang@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/init.h>
|
|
+
|
|
+#include <linux/cpufreq.h>
|
|
+
|
|
+#include <asm/jzsoc.h>
|
|
+#include <asm/processor.h>
|
|
+
|
|
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
|
|
+ "cpufreq-jz4750d", msg)
|
|
+
|
|
+#undef CHANGE_PLL
|
|
+
|
|
+#define PLL_UNCHANGED 0
|
|
+#define PLL_GOES_UP 1
|
|
+#define PLL_GOES_DOWN 2
|
|
+
|
|
+#define PLL_WAIT_500NS (500*(__cpm_get_cclk()/1000000000))
|
|
+
|
|
+/* Saved the boot-time parameters */
|
|
+static struct {
|
|
+ /* SDRAM parameters */
|
|
+ unsigned int mclk; /* memory clock, KHz */
|
|
+ unsigned int tras; /* RAS pulse width, cycles of mclk */
|
|
+ unsigned int rcd; /* RAS to CAS Delay, cycles of mclk */
|
|
+ unsigned int tpc; /* RAS Precharge time, cycles of mclk */
|
|
+ unsigned int trwl; /* Write Precharge Time, cycles of mclk */
|
|
+ unsigned int trc; /* RAS Cycle Time, cycles of mclk */
|
|
+ unsigned int rtcor; /* Refresh Time Constant */
|
|
+ unsigned int sdram_initialized;
|
|
+
|
|
+ /* LCD parameters */
|
|
+ unsigned int lcd_clk; /* LCD clock, Hz */
|
|
+ unsigned int lcdpix_clk; /* LCD Pixel clock, Hz */
|
|
+ unsigned int lcd_clks_initialized;
|
|
+} boot_config;
|
|
+
|
|
+struct jz4750d_freq_percpu_info {
|
|
+ struct cpufreq_frequency_table table[7];
|
|
+};
|
|
+
|
|
+static struct jz4750d_freq_percpu_info jz4750d_freq_table;
|
|
+
|
|
+/*
|
|
+ * This contains the registers value for an operating point.
|
|
+ * If only part of a register needs to change then there is
|
|
+ * a mask value for that register.
|
|
+ * When going to a new operating point the current register
|
|
+ * value is ANDed with the ~mask and ORed with the new value.
|
|
+ */
|
|
+struct dpm_regs {
|
|
+ u32 cpccr; /* Clock Freq Control Register */
|
|
+ u32 cpccr_mask; /* Clock Freq Control Register mask */
|
|
+ u32 cppcr; /* PLL1 Control Register */
|
|
+ u32 cppcr_mask; /* PLL1 Control Register mask */
|
|
+ u32 pll_up_flag; /* New PLL freq is higher than current or not */
|
|
+};
|
|
+
|
|
+extern jz_clocks_t jz_clocks;
|
|
+
|
|
+static void jz_update_clocks(void)
|
|
+{
|
|
+ /* Next clocks must be updated if we have changed
|
|
+ * the PLL or divisors.
|
|
+ */
|
|
+ jz_clocks.cclk = __cpm_get_cclk();
|
|
+ jz_clocks.hclk = __cpm_get_hclk();
|
|
+ jz_clocks.mclk = __cpm_get_mclk();
|
|
+ jz_clocks.pclk = __cpm_get_pclk();
|
|
+ jz_clocks.lcdclk = __cpm_get_lcdclk();
|
|
+ jz_clocks.pixclk = __cpm_get_pixclk();
|
|
+ jz_clocks.i2sclk = __cpm_get_i2sclk();
|
|
+ jz_clocks.usbclk = __cpm_get_usbclk();
|
|
+ jz_clocks.mscclk = __cpm_get_mscclk(0);
|
|
+}
|
|
+
|
|
+static void
|
|
+jz_init_boot_config(void)
|
|
+{
|
|
+ if (!boot_config.lcd_clks_initialized) {
|
|
+ /* the first time to scale pll */
|
|
+ boot_config.lcd_clk = __cpm_get_lcdclk();
|
|
+ boot_config.lcdpix_clk = __cpm_get_pixclk();
|
|
+ boot_config.lcd_clks_initialized = 1;
|
|
+ }
|
|
+
|
|
+ if (!boot_config.sdram_initialized) {
|
|
+ /* the first time to scale frequencies */
|
|
+ unsigned int dmcr, rtcor;
|
|
+ unsigned int tras, rcd, tpc, trwl, trc;
|
|
+
|
|
+ dmcr = REG_EMC_DMCR;
|
|
+ rtcor = REG_EMC_RTCOR;
|
|
+
|
|
+ tras = (dmcr >> 13) & 0x7;
|
|
+ rcd = (dmcr >> 11) & 0x3;
|
|
+ tpc = (dmcr >> 8) & 0x7;
|
|
+ trwl = (dmcr >> 5) & 0x3;
|
|
+ trc = (dmcr >> 2) & 0x7;
|
|
+
|
|
+ boot_config.mclk = __cpm_get_mclk() / 1000;
|
|
+ boot_config.tras = tras + 4;
|
|
+ boot_config.rcd = rcd + 1;
|
|
+ boot_config.tpc = tpc + 1;
|
|
+ boot_config.trwl = trwl + 1;
|
|
+ boot_config.trc = trc * 2 + 1;
|
|
+ boot_config.rtcor = rtcor;
|
|
+
|
|
+ boot_config.sdram_initialized = 1;
|
|
+ }
|
|
+}
|
|
+
|
|
+static void jz_update_dram_rtcor(unsigned int new_mclk)
|
|
+{
|
|
+ unsigned int rtcor;
|
|
+
|
|
+ new_mclk /= 1000;
|
|
+ rtcor = boot_config.rtcor * new_mclk / boot_config.mclk;
|
|
+ rtcor--;
|
|
+
|
|
+ if (rtcor < 1) rtcor = 1;
|
|
+ if (rtcor > 255) rtcor = 255;
|
|
+
|
|
+ REG_EMC_RTCOR = rtcor;
|
|
+ REG_EMC_RTCNT = rtcor;
|
|
+}
|
|
+
|
|
+static void jz_update_dram_dmcr(unsigned int new_mclk)
|
|
+{
|
|
+ unsigned int dmcr;
|
|
+ unsigned int tras, rcd, tpc, trwl, trc;
|
|
+ unsigned int valid_time, new_time; /* ns */
|
|
+
|
|
+ new_mclk /= 1000;
|
|
+ tras = boot_config.tras * new_mclk / boot_config.mclk;
|
|
+ rcd = boot_config.rcd * new_mclk / boot_config.mclk;
|
|
+ tpc = boot_config.tpc * new_mclk / boot_config.mclk;
|
|
+ trwl = boot_config.trwl * new_mclk / boot_config.mclk;
|
|
+ trc = boot_config.trc * new_mclk / boot_config.mclk;
|
|
+
|
|
+ /* Validation checking */
|
|
+ valid_time = (boot_config.tras * 1000000) / boot_config.mclk;
|
|
+ new_time = (tras * 1000000) / new_mclk;
|
|
+ if (new_time < valid_time) tras += 1;
|
|
+
|
|
+ valid_time = (boot_config.rcd * 1000000) / boot_config.mclk;
|
|
+ new_time = (rcd * 1000000) / new_mclk;
|
|
+ if (new_time < valid_time) rcd += 1;
|
|
+
|
|
+ valid_time = (boot_config.tpc * 1000000) / boot_config.mclk;
|
|
+ new_time = (tpc * 1000000) / new_mclk;
|
|
+ if (new_time < valid_time) tpc += 1;
|
|
+
|
|
+ valid_time = (boot_config.trwl * 1000000) / boot_config.mclk;
|
|
+ new_time = (trwl * 1000000) / new_mclk;
|
|
+ if (new_time < valid_time) trwl += 1;
|
|
+
|
|
+ valid_time = (boot_config.trc * 1000000) / boot_config.mclk;
|
|
+ new_time = (trc * 1000000) / new_mclk;
|
|
+ if (new_time < valid_time) trc += 2;
|
|
+
|
|
+ tras = (tras < 4) ? 4: tras;
|
|
+ tras = (tras > 11) ? 11: tras;
|
|
+ tras -= 4;
|
|
+
|
|
+ rcd = (rcd < 1) ? 1: rcd;
|
|
+ rcd = (rcd > 4) ? 4: rcd;
|
|
+ rcd -= 1;
|
|
+
|
|
+ tpc = (tpc < 1) ? 1: tpc;
|
|
+ tpc = (tpc > 8) ? 8: tpc;
|
|
+ tpc -= 1;
|
|
+
|
|
+ trwl = (trwl < 1) ? 1: trwl;
|
|
+ trwl = (trwl > 4) ? 4: trwl;
|
|
+ trwl -= 1;
|
|
+
|
|
+ trc = (trc < 1) ? 1: trc;
|
|
+ trc = (trc > 15) ? 15: trc;
|
|
+ trc /= 2;
|
|
+
|
|
+ dmcr = REG_EMC_DMCR;
|
|
+
|
|
+ dmcr &= ~(EMC_DMCR_TRAS_MASK | EMC_DMCR_RCD_MASK | EMC_DMCR_TPC_MASK | EMC_DMCR_TRWL_MASK | EMC_DMCR_TRC_MASK);
|
|
+ dmcr |= ((tras << EMC_DMCR_TRAS_BIT) | (rcd << EMC_DMCR_RCD_BIT) | (tpc << EMC_DMCR_TPC_BIT) | (trwl << EMC_DMCR_TRWL_BIT) | (trc << EMC_DMCR_TRC_BIT));
|
|
+
|
|
+ REG_EMC_DMCR = dmcr;
|
|
+}
|
|
+
|
|
+static void jz_update_dram_prev(unsigned int cur_mclk, unsigned int new_mclk)
|
|
+{
|
|
+ /* No risk, no fun: run with interrupts on! */
|
|
+ if (new_mclk > cur_mclk) {
|
|
+ /* We're going FASTER, so first update TRAS, RCD, TPC, TRWL
|
|
+ * and TRC of DMCR before changing the frequency.
|
|
+ */
|
|
+ jz_update_dram_dmcr(new_mclk);
|
|
+ } else {
|
|
+ /* We're going SLOWER: first update RTCOR value
|
|
+ * before changing the frequency.
|
|
+ */
|
|
+ jz_update_dram_rtcor(new_mclk);
|
|
+ }
|
|
+}
|
|
+
|
|
+static void jz_update_dram_post(unsigned int cur_mclk, unsigned int new_mclk)
|
|
+{
|
|
+ /* No risk, no fun: run with interrupts on! */
|
|
+ if (new_mclk > cur_mclk) {
|
|
+ /* We're going FASTER, so update RTCOR
|
|
+ * after changing the frequency
|
|
+ */
|
|
+ jz_update_dram_rtcor(new_mclk);
|
|
+ } else {
|
|
+ /* We're going SLOWER: so update TRAS, RCD, TPC, TRWL
|
|
+ * and TRC of DMCR after changing the frequency.
|
|
+ */
|
|
+ jz_update_dram_dmcr(new_mclk);
|
|
+ }
|
|
+}
|
|
+
|
|
+static void jz_scale_divisors(struct dpm_regs *regs)
|
|
+{
|
|
+ unsigned int cpccr;
|
|
+ unsigned int cur_mclk, new_mclk;
|
|
+ int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
|
|
+ unsigned int tmp = 0, wait = PLL_WAIT_500NS;
|
|
+
|
|
+ cpccr = REG_CPM_CPCCR;
|
|
+ cpccr &= ~((unsigned long)regs->cpccr_mask);
|
|
+ cpccr |= regs->cpccr;
|
|
+ cpccr |= CPM_CPCCR_CE; /* update immediately */
|
|
+
|
|
+ cur_mclk = __cpm_get_mclk();
|
|
+ new_mclk = __cpm_get_pllout() / div[(cpccr & CPM_CPCCR_MDIV_MASK) >> CPM_CPCCR_MDIV_BIT];
|
|
+
|
|
+ /* Update some DRAM parameters before changing frequency */
|
|
+ jz_update_dram_prev(cur_mclk, new_mclk);
|
|
+
|
|
+ /* update register to change the clocks.
|
|
+ * align this code to a cache line.
|
|
+ */
|
|
+ __asm__ __volatile__(
|
|
+ ".set noreorder\n\t"
|
|
+ ".align 5\n"
|
|
+ "sw %1,0(%0)\n\t"
|
|
+ "li %3,0\n\t"
|
|
+ "1:\n\t"
|
|
+ "bne %3,%2,1b\n\t"
|
|
+ "addi %3, 1\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ ".set reorder\n\t"
|
|
+ :
|
|
+ : "r" (CPM_CPCCR), "r" (cpccr), "r" (wait), "r" (tmp));
|
|
+
|
|
+ /* Update some other DRAM parameters after changing frequency */
|
|
+ jz_update_dram_post(cur_mclk, new_mclk);
|
|
+}
|
|
+
|
|
+#ifdef CHANGE_PLL
|
|
+/* Maintain the LCD clock and pixel clock */
|
|
+static void jz_scale_lcd_divisors(struct dpm_regs *regs)
|
|
+{
|
|
+ unsigned int new_pll, new_lcd_div, new_lcdpix_div;
|
|
+ unsigned int cpccr;
|
|
+ unsigned int tmp = 0, wait = PLL_WAIT_500NS;
|
|
+
|
|
+ if (!boot_config.lcd_clks_initialized) return;
|
|
+
|
|
+ new_pll = __cpm_get_pllout();
|
|
+ new_lcd_div = new_pll / boot_config.lcd_clk;
|
|
+ new_lcdpix_div = new_pll / boot_config.lcdpix_clk;
|
|
+
|
|
+ if (new_lcd_div < 1)
|
|
+ new_lcd_div = 1;
|
|
+ if (new_lcd_div > 16)
|
|
+ new_lcd_div = 16;
|
|
+
|
|
+ if (new_lcdpix_div < 1)
|
|
+ new_lcdpix_div = 1;
|
|
+ if (new_lcdpix_div > 512)
|
|
+ new_lcdpix_div = 512;
|
|
+
|
|
+// REG_CPM_CPCCR2 = new_lcdpix_div - 1;
|
|
+
|
|
+ cpccr = REG_CPM_CPCCR;
|
|
+ cpccr &= ~CPM_CPCCR_LDIV_MASK;
|
|
+ cpccr |= ((new_lcd_div - 1) << CPM_CPCCR_LDIV_BIT);
|
|
+ cpccr |= CPM_CPCCR_CE; /* update immediately */
|
|
+
|
|
+ /* update register to change the clocks.
|
|
+ * align this code to a cache line.
|
|
+ */
|
|
+ __asm__ __volatile__(
|
|
+ ".set noreorder\n\t"
|
|
+ ".align 5\n"
|
|
+ "sw %1,0(%0)\n\t"
|
|
+ "li %3,0\n\t"
|
|
+ "1:\n\t"
|
|
+ "bne %3,%2,1b\n\t"
|
|
+ "addi %3, 1\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ ".set reorder\n\t"
|
|
+ :
|
|
+ : "r" (CPM_CPCCR), "r" (cpccr), "r" (wait), "r" (tmp));
|
|
+}
|
|
+
|
|
+static void jz_scale_pll(struct dpm_regs *regs)
|
|
+{
|
|
+ unsigned int cppcr;
|
|
+ unsigned int cur_mclk, new_mclk, new_pll;
|
|
+ int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
|
|
+ int od[] = {1, 2, 2, 4};
|
|
+
|
|
+ cppcr = REG_CPM_CPPCR;
|
|
+ cppcr &= ~(regs->cppcr_mask | CPM_CPPCR_PLLS | CPM_CPPCR_PLLEN | CPM_CPPCR_PLLST_MASK);
|
|
+ regs->cppcr &= ~CPM_CPPCR_PLLEN;
|
|
+ cppcr |= (regs->cppcr | 0xff);
|
|
+
|
|
+ /* Update some DRAM parameters before changing frequency */
|
|
+ new_pll = JZ_EXTAL * ((cppcr>>23)+2) / ((((cppcr>>18)&0x1f)+2) * od[(cppcr>>16)&0x03]);
|
|
+ cur_mclk = __cpm_get_mclk();
|
|
+ new_mclk = new_pll / div[(REG_CPM_CPCCR>>16) & 0xf];
|
|
+
|
|
+ /*
|
|
+ * Update some SDRAM parameters
|
|
+ */
|
|
+ jz_update_dram_prev(cur_mclk, new_mclk);
|
|
+
|
|
+ /*
|
|
+ * Update PLL, align code to cache line.
|
|
+ */
|
|
+ cppcr |= CPM_CPPCR_PLLEN;
|
|
+ __asm__ __volatile__(
|
|
+ ".set noreorder\n\t"
|
|
+ ".align 5\n"
|
|
+ "sw %1,0(%0)\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ "nop\n\t"
|
|
+ ".set reorder\n\t"
|
|
+ :
|
|
+ : "r" (CPM_CPPCR), "r" (cppcr));
|
|
+
|
|
+ /* Update some other DRAM parameters after changing frequency */
|
|
+ jz_update_dram_post(cur_mclk, new_mclk);
|
|
+}
|
|
+#endif
|
|
+
|
|
+static void jz4750d_transition(struct dpm_regs *regs)
|
|
+{
|
|
+ /*
|
|
+ * Get and save some boot-time conditions.
|
|
+ */
|
|
+ jz_init_boot_config();
|
|
+
|
|
+#ifdef CHANGE_PLL
|
|
+ /*
|
|
+ * Disable LCD before scaling pll.
|
|
+ * LCD and LCD pixel clocks should not be changed even if the PLL
|
|
+ * output frequency has been changed.
|
|
+ */
|
|
+ REG_LCD_CTRL &= ~LCD_CTRL_ENA;
|
|
+
|
|
+ /*
|
|
+ * Stop module clocks before scaling PLL
|
|
+ */
|
|
+ __cpm_stop_eth();
|
|
+ __cpm_stop_aic(1);
|
|
+ __cpm_stop_aic(2);
|
|
+#endif
|
|
+
|
|
+ /* ... add more as necessary */
|
|
+
|
|
+ if (regs->pll_up_flag == PLL_GOES_UP) {
|
|
+ /* the pll frequency is going up, so change dividors first */
|
|
+ jz_scale_divisors(regs);
|
|
+#ifdef CHANGE_PLL
|
|
+ jz_scale_pll(regs);
|
|
+#endif
|
|
+ }
|
|
+ else if (regs->pll_up_flag == PLL_GOES_DOWN) {
|
|
+ /* the pll frequency is going down, so change pll first */
|
|
+#ifdef CHANGE_PLL
|
|
+ jz_scale_pll(regs);
|
|
+#endif
|
|
+ jz_scale_divisors(regs);
|
|
+ }
|
|
+ else {
|
|
+ /* the pll frequency is unchanged, so change divisors only */
|
|
+ jz_scale_divisors(regs);
|
|
+ }
|
|
+
|
|
+#ifdef CHANGE_PLL
|
|
+ /*
|
|
+ * Restart module clocks before scaling PLL
|
|
+ */
|
|
+ __cpm_start_eth();
|
|
+ __cpm_start_aic(1);
|
|
+ __cpm_start_aic(2);
|
|
+
|
|
+ /* ... add more as necessary */
|
|
+
|
|
+ /* Scale the LCD divisors after scaling pll */
|
|
+ if (regs->pll_up_flag != PLL_UNCHANGED) {
|
|
+ jz_scale_lcd_divisors(regs);
|
|
+ }
|
|
+
|
|
+ /* Enable LCD controller */
|
|
+ REG_LCD_CTRL &= ~LCD_CTRL_DIS;
|
|
+ REG_LCD_CTRL |= LCD_CTRL_ENA;
|
|
+#endif
|
|
+
|
|
+ /* Update system clocks */
|
|
+ jz_update_clocks();
|
|
+}
|
|
+
|
|
+extern unsigned int idle_times;
|
|
+static unsigned int jz4750d_freq_get(unsigned int cpu)
|
|
+{
|
|
+ return (__cpm_get_cclk() / 1000);
|
|
+}
|
|
+
|
|
+static unsigned int index_to_divisor(unsigned int index, struct dpm_regs *regs)
|
|
+{
|
|
+ int n2FR[33] = {
|
|
+ 0, 0, 1, 2, 3, 0, 4, 0, 5, 0, 0, 0, 6, 0, 0, 0,
|
|
+ 7, 0, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 0, 0,
|
|
+ 9
|
|
+ };
|
|
+ int div[4] = {1, 2, 2, 2}; /* divisors of I:S:P:M */
|
|
+ unsigned int div_of_cclk, new_freq, i;
|
|
+
|
|
+ regs->pll_up_flag = PLL_UNCHANGED;
|
|
+ regs->cpccr_mask = CPM_CPCCR_CDIV_MASK | CPM_CPCCR_HDIV_MASK | CPM_CPCCR_PDIV_MASK | CPM_CPCCR_MDIV_MASK;
|
|
+
|
|
+ new_freq = jz4750d_freq_table.table[index].frequency;
|
|
+
|
|
+ do {
|
|
+ div_of_cclk = __cpm_get_pllout() / (1000 * new_freq);
|
|
+ } while (div_of_cclk==0);
|
|
+
|
|
+ if(div_of_cclk == 1 || div_of_cclk == 2 || div_of_cclk == 4) {
|
|
+ for(i = 1; i<4; i++) {
|
|
+ div[i] = 3;
|
|
+ }
|
|
+ } else {
|
|
+ for(i = 1; i<4; i++) {
|
|
+ div[i] = 2;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ for(i = 0; i<4; i++) {
|
|
+ div[i] *= div_of_cclk;
|
|
+ }
|
|
+
|
|
+ dprintk("divisors of I:S:P:M = %d:%d:%d:%d\n", div[0], div[1], div[2], div[3]);
|
|
+
|
|
+ regs->cpccr =
|
|
+ (n2FR[div[0]] << CPM_CPCCR_CDIV_BIT) |
|
|
+ (n2FR[div[1]] << CPM_CPCCR_HDIV_BIT) |
|
|
+ (n2FR[div[2]] << CPM_CPCCR_PDIV_BIT) |
|
|
+ (n2FR[div[3]] << CPM_CPCCR_MDIV_BIT);
|
|
+
|
|
+ return div_of_cclk;
|
|
+}
|
|
+
|
|
+static void jz4750d_set_cpu_divider_index(unsigned int cpu, unsigned int index)
|
|
+{
|
|
+ unsigned long divisor, old_divisor;
|
|
+ struct cpufreq_freqs freqs;
|
|
+ struct dpm_regs regs;
|
|
+
|
|
+ old_divisor = __cpm_get_pllout() / __cpm_get_cclk();
|
|
+ divisor = index_to_divisor(index, ®s);
|
|
+
|
|
+ freqs.old = __cpm_get_cclk() / 1000;
|
|
+ freqs.new = __cpm_get_pllout() / (1000 * divisor);
|
|
+ freqs.cpu = cpu;
|
|
+
|
|
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
|
|
+
|
|
+ if (old_divisor != divisor)
|
|
+ jz4750d_transition(®s);
|
|
+
|
|
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
|
|
+}
|
|
+
|
|
+static int jz4750d_freq_target(struct cpufreq_policy *policy,
|
|
+ unsigned int target_freq,
|
|
+ unsigned int relation)
|
|
+{
|
|
+ unsigned int new_index = 0;
|
|
+
|
|
+ if (cpufreq_frequency_table_target(policy,
|
|
+ &jz4750d_freq_table.table[0],
|
|
+ target_freq, relation, &new_index))
|
|
+ return -EINVAL;
|
|
+
|
|
+ jz4750d_set_cpu_divider_index(policy->cpu, new_index);
|
|
+
|
|
+ dprintk("new frequency is %d KHz (REG_CPM_CPCCR:0x%x)\n", __cpm_get_cclk() / 1000, REG_CPM_CPCCR);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int jz4750d_freq_verify(struct cpufreq_policy *policy)
|
|
+{
|
|
+ return cpufreq_frequency_table_verify(policy,
|
|
+ &jz4750d_freq_table.table[0]);
|
|
+}
|
|
+
|
|
+static int __init jz4750d_cpufreq_driver_init(struct cpufreq_policy *policy)
|
|
+{
|
|
+
|
|
+ struct cpufreq_frequency_table *table = &jz4750d_freq_table.table[0];
|
|
+ unsigned int MAX_FREQ;
|
|
+
|
|
+ dprintk(KERN_INFO "Jz4750d cpufreq driver\n");
|
|
+
|
|
+ if (policy->cpu != 0)
|
|
+ return -EINVAL;
|
|
+
|
|
+ policy->cur = MAX_FREQ = __cpm_get_cclk() / 1000; /* in kHz. Current and max frequency is determined by u-boot */
|
|
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
|
|
+
|
|
+ policy->cpuinfo.min_freq = MAX_FREQ/8;
|
|
+ policy->cpuinfo.max_freq = MAX_FREQ;
|
|
+ policy->cpuinfo.transition_latency = 100000; /* in 10^(-9) s = nanoseconds */
|
|
+
|
|
+ table[0].index = 0;
|
|
+ table[0].frequency = MAX_FREQ/8;
|
|
+ table[1].index = 1;
|
|
+ table[1].frequency = MAX_FREQ/6;
|
|
+ table[2].index = 2;
|
|
+ table[2].frequency = MAX_FREQ/4;
|
|
+ table[3].index = 3;
|
|
+ table[3].frequency = MAX_FREQ/3;
|
|
+ table[4].index = 4;
|
|
+ table[4].frequency = MAX_FREQ/2;
|
|
+ table[5].index = 5;
|
|
+ table[5].frequency = MAX_FREQ;
|
|
+ table[6].index = 6;
|
|
+ table[6].frequency = CPUFREQ_TABLE_END;
|
|
+
|
|
+#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
|
|
+ cpufreq_frequency_table_get_attr(table, policy->cpu); /* for showing /sys/devices/system/cpu/cpuX/cpufreq/stats/ */
|
|
+#endif
|
|
+
|
|
+ return cpufreq_frequency_table_cpuinfo(policy, table);
|
|
+}
|
|
+
|
|
+static struct cpufreq_driver cpufreq_jz4750d_driver = {
|
|
+// .flags = CPUFREQ_STICKY,
|
|
+ .init = jz4750d_cpufreq_driver_init,
|
|
+ .verify = jz4750d_freq_verify,
|
|
+ .target = jz4750d_freq_target,
|
|
+ .get = jz4750d_freq_get,
|
|
+ .name = "jz4750d",
|
|
+};
|
|
+
|
|
+static int __init jz4750d_cpufreq_init(void)
|
|
+{
|
|
+ return cpufreq_register_driver(&cpufreq_jz4750d_driver);
|
|
+}
|
|
+
|
|
+static void __exit jz4750d_cpufreq_exit(void)
|
|
+{
|
|
+ cpufreq_unregister_driver(&cpufreq_jz4750d_driver);
|
|
+}
|
|
+
|
|
+module_init(jz4750d_cpufreq_init);
|
|
+module_exit(jz4750d_cpufreq_exit);
|
|
+
|
|
+MODULE_AUTHOR("Regen <lhhuang@ingenic.cn>");
|
|
+MODULE_DESCRIPTION("cpufreq driver for Jz4750d");
|
|
+MODULE_LICENSE("GPL");
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750d/dma.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750d/dma.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,822 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4750d/dma.c
|
|
+ *
|
|
+ * Support functions for the JZ4750D internal DMA channels.
|
|
+ * No-descriptor transfer only.
|
|
+ * Descriptor transfer should also call jz_request_dma() to get a free
|
|
+ * channel and call jz_free_dma() to free the channel. And driver should
|
|
+ * build the DMA descriptor and setup the DMA channel by itself.
|
|
+ *
|
|
+ * Copyright (C) 2006 - 2008 Ingenic Semiconductor Inc.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License as published by the
|
|
+ * Free Software Foundation; either version 2 of the License, or (at your
|
|
+ * option) any later version.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/errno.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/spinlock.h>
|
|
+#include <linux/string.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/soundcard.h>
|
|
+
|
|
+#include <asm/system.h>
|
|
+#include <asm/addrspace.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+/*
|
|
+ * A note on resource allocation:
|
|
+ *
|
|
+ * All drivers needing DMA channels, should allocate and release them
|
|
+ * through the public routines `jz_request_dma()' and `jz_free_dma()'.
|
|
+ *
|
|
+ * In order to avoid problems, all processes should allocate resources in
|
|
+ * the same sequence and release them in the reverse order.
|
|
+ *
|
|
+ * So, when allocating DMAs and IRQs, first allocate the DMA, then the IRQ.
|
|
+ * When releasing them, first release the IRQ, then release the DMA. The
|
|
+ * main reason for this order is that, if you are requesting the DMA buffer
|
|
+ * done interrupt, you won't know the irq number until the DMA channel is
|
|
+ * returned from jz_request_dma().
|
|
+ */
|
|
+
|
|
+struct jz_dma_chan jz_dma_table[MAX_DMA_NUM] = {
|
|
+ {dev_id:DMA_ID_BCH_ENC,}, /* DMAC0 channel 0, reserved for BCH */
|
|
+ {dev_id:-1,}, /* DMAC0 channel 1 */
|
|
+ {dev_id:-1,}, /* DMAC0 channel 2 */
|
|
+ {dev_id:-1,}, /* DMAC0 channel 3 */
|
|
+ {dev_id:-1,}, /* DMAC1 channel 0 */
|
|
+ {dev_id:-1,}, /* DMAC1 channel 1 */
|
|
+ {dev_id:-1,}, /* DMAC1 channel 2 */
|
|
+ {dev_id:-1,}, /* DMAC1 channel 3 */
|
|
+};
|
|
+
|
|
+// Device FIFO addresses and default DMA modes
|
|
+static const struct {
|
|
+ unsigned int fifo_addr;
|
|
+ unsigned int dma_mode;
|
|
+ unsigned int dma_source;
|
|
+} dma_dev_table[DMA_ID_MAX] = {
|
|
+ {0, DMA_AUTOINIT, DMAC_DRSR_RS_EXT}, /* External request with DREQn */
|
|
+ {0x18000000, DMA_AUTOINIT, DMAC_DRSR_RS_NAND}, /* NAND request */
|
|
+ {CPHYSADDR(BCH_DR), DMA_8BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_BCH_ENC},
|
|
+ {CPHYSADDR(BCH_DR), DMA_8BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_BCH_DEC},
|
|
+ {0, DMA_AUTOINIT, DMAC_DRSR_RS_AUTO},
|
|
+// {CPHYSADDR(TSSI_FIFO), DMA_32BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_TSSIIN},
|
|
+ {CPHYSADDR(UART3_TDR), DMA_8BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_UART3OUT},
|
|
+ {CPHYSADDR(UART3_RDR), DMA_8BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_UART3IN},
|
|
+ {CPHYSADDR(UART2_TDR), DMA_8BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_UART2OUT},
|
|
+ {CPHYSADDR(UART2_RDR), DMA_8BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_UART2IN},
|
|
+ {CPHYSADDR(UART1_TDR), DMA_8BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_UART1OUT},
|
|
+ {CPHYSADDR(UART1_RDR), DMA_8BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_UART1IN},
|
|
+ {CPHYSADDR(UART0_TDR), DMA_8BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_UART0OUT},
|
|
+ {CPHYSADDR(UART0_RDR), DMA_8BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_UART0IN},
|
|
+ {CPHYSADDR(SSI_DR(0)), DMA_32BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_SSI0OUT},
|
|
+ {CPHYSADDR(SSI_DR(0)), DMA_32BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_SSI0IN},
|
|
+ {CPHYSADDR(AIC_DR), DMA_32BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_AICOUT},
|
|
+ {CPHYSADDR(AIC_DR), DMA_32BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_AICIN},
|
|
+ {CPHYSADDR(MSC_TXFIFO(0)), DMA_32BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_MSC0OUT},
|
|
+ {CPHYSADDR(MSC_RXFIFO(0)), DMA_32BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_MSC0IN},
|
|
+ {0, DMA_AUTOINIT, DMAC_DRSR_RS_TCU},
|
|
+ {SADC_TSDAT, DMA_32BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_SADC},/* Touch Screen Data Register */
|
|
+ {CPHYSADDR(MSC_TXFIFO(1)), DMA_32BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_MSC1OUT}, /* SSC1 TX */
|
|
+ {CPHYSADDR(MSC_RXFIFO(1)), DMA_32BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_MSC1IN}, /* SSC1 RX */
|
|
+ {CPHYSADDR(SSI_DR(1)), DMA_32BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_SSI1OUT},
|
|
+ {CPHYSADDR(SSI_DR(1)), DMA_32BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_SSI1IN},
|
|
+ {CPHYSADDR(PCM_DP), DMA_16BIT_TX_CMD | DMA_MODE_WRITE, DMAC_DRSR_RS_PMOUT},
|
|
+ {CPHYSADDR(PCM_DP), DMA_16BIT_RX_CMD | DMA_MODE_READ, DMAC_DRSR_RS_PMIN},
|
|
+ {},
|
|
+};
|
|
+
|
|
+
|
|
+int jz_dma_read_proc(char *buf, char **start, off_t fpos,
|
|
+ int length, int *eof, void *data)
|
|
+{
|
|
+ int i, len = 0;
|
|
+ struct jz_dma_chan *chan;
|
|
+
|
|
+ for (i = 0; i < MAX_DMA_NUM; i++) {
|
|
+ if ((chan = get_dma_chan(i)) != NULL) {
|
|
+ len += sprintf(buf + len, "%2d: %s\n",
|
|
+ i, chan->dev_str);
|
|
+ }
|
|
+ }
|
|
+
|
|
+ if (fpos >= len) {
|
|
+ *start = buf;
|
|
+ *eof = 1;
|
|
+ return 0;
|
|
+ }
|
|
+ *start = buf + fpos;
|
|
+ if ((len -= fpos) > length)
|
|
+ return length;
|
|
+ *eof = 1;
|
|
+ return len;
|
|
+}
|
|
+
|
|
+
|
|
+void dump_jz_dma_channel(unsigned int dmanr)
|
|
+{
|
|
+ struct jz_dma_chan *chan;
|
|
+
|
|
+ if (dmanr > MAX_DMA_NUM)
|
|
+ return;
|
|
+ chan = &jz_dma_table[dmanr];
|
|
+
|
|
+ printk("DMA%d Registers:\n", dmanr);
|
|
+ printk(" DMACR = 0x%08x\n", REG_DMAC_DMACR(chan->io/HALF_DMA_NUM));
|
|
+ printk(" DSAR = 0x%08x\n", REG_DMAC_DSAR(dmanr));
|
|
+ printk(" DTAR = 0x%08x\n", REG_DMAC_DTAR(dmanr));
|
|
+ printk(" DTCR = 0x%08x\n", REG_DMAC_DTCR(dmanr));
|
|
+ printk(" DRSR = 0x%08x\n", REG_DMAC_DRSR(dmanr));
|
|
+ printk(" DCCSR = 0x%08x\n", REG_DMAC_DCCSR(dmanr));
|
|
+ printk(" DCMD = 0x%08x\n", REG_DMAC_DCMD(dmanr));
|
|
+ printk(" DDA = 0x%08x\n", REG_DMAC_DDA(dmanr));
|
|
+ printk(" DMADBR = 0x%08x\n", REG_DMAC_DMADBR(chan->io/HALF_DMA_NUM));
|
|
+}
|
|
+
|
|
+
|
|
+/**
|
|
+ * jz_request_dma - dynamically allcate an idle DMA channel to return
|
|
+ * @dev_id: the specified dma device id or DMA_ID_RAW_SET
|
|
+ * @dev_str: the specified dma device string name
|
|
+ * @irqhandler: the irq handler, or NULL
|
|
+ * @irqflags: the irq handler flags
|
|
+ * @irq_dev_id: the irq handler device id for shared irq
|
|
+ *
|
|
+ * Finds a free channel, and binds the requested device to it.
|
|
+ * Returns the allocated channel number, or negative on error.
|
|
+ * Requests the DMA done IRQ if irqhandler != NULL.
|
|
+ *
|
|
+*/
|
|
+/*int jz_request_dma(int dev_id, const char *dev_str,
|
|
+ void (*irqhandler)(int, void *, struct pt_regs *),
|
|
+ unsigned long irqflags,
|
|
+ void *irq_dev_id)
|
|
+*/
|
|
+
|
|
+int jz_request_dma(int dev_id, const char *dev_str,
|
|
+ irqreturn_t (*irqhandler)(int, void *),
|
|
+ unsigned long irqflags,
|
|
+ void *irq_dev_id)
|
|
+{
|
|
+ struct jz_dma_chan *chan;
|
|
+ int i, ret;
|
|
+
|
|
+ if (dev_id < 0 || dev_id >= DMA_ID_MAX)
|
|
+ return -EINVAL;
|
|
+
|
|
+ for (i = 0; i < MAX_DMA_NUM; i++) {
|
|
+ if (jz_dma_table[i].dev_id < 0)
|
|
+ break;
|
|
+ }
|
|
+ if (i == MAX_DMA_NUM) /* no free channel */
|
|
+ return -ENODEV;
|
|
+
|
|
+ /* we got a free channel */
|
|
+ chan = &jz_dma_table[i];
|
|
+
|
|
+ if (irqhandler) {
|
|
+ chan->irq = IRQ_DMA_0 + i; // allocate irq number
|
|
+ chan->irq_dev = irq_dev_id;
|
|
+ if ((ret = request_irq(chan->irq, irqhandler, irqflags,
|
|
+ dev_str, chan->irq_dev))) {
|
|
+ chan->irq = -1;
|
|
+ chan->irq_dev = NULL;
|
|
+ return ret;
|
|
+ }
|
|
+ } else {
|
|
+ chan->irq = -1;
|
|
+ chan->irq_dev = NULL;
|
|
+ }
|
|
+
|
|
+ // fill it in
|
|
+ chan->io = i;
|
|
+ chan->dev_id = dev_id;
|
|
+ chan->dev_str = dev_str;
|
|
+ chan->fifo_addr = dma_dev_table[dev_id].fifo_addr;
|
|
+ chan->mode = dma_dev_table[dev_id].dma_mode;
|
|
+ chan->source = dma_dev_table[dev_id].dma_source;
|
|
+
|
|
+ if (i < HALF_DMA_NUM)
|
|
+ REG_DMAC_DMACKE(0) = 1 << i;
|
|
+ else
|
|
+ REG_DMAC_DMACKE(1) = 1 << (i - HALF_DMA_NUM);
|
|
+
|
|
+ return i;
|
|
+}
|
|
+
|
|
+void jz_free_dma(unsigned int dmanr)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan) {
|
|
+ printk("Trying to free DMA%d\n", dmanr);
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ disable_dma(dmanr);
|
|
+ if (chan->irq)
|
|
+ free_irq(chan->irq, chan->irq_dev);
|
|
+
|
|
+ chan->irq = -1;
|
|
+ chan->irq_dev = NULL;
|
|
+ chan->dev_id = -1;
|
|
+}
|
|
+
|
|
+void jz_set_dma_dest_width(int dmanr, int nbit)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ chan->mode &= ~DMAC_DCMD_DWDH_MASK;
|
|
+ switch (nbit) {
|
|
+ case 8:
|
|
+ chan->mode |= DMAC_DCMD_DWDH_8;
|
|
+ break;
|
|
+ case 16:
|
|
+ chan->mode |= DMAC_DCMD_DWDH_16;
|
|
+ break;
|
|
+ case 32:
|
|
+ chan->mode |= DMAC_DCMD_DWDH_32;
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+void jz_set_dma_src_width(int dmanr, int nbit)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ chan->mode &= ~DMAC_DCMD_SWDH_MASK;
|
|
+ switch (nbit) {
|
|
+ case 8:
|
|
+ chan->mode |= DMAC_DCMD_SWDH_8;
|
|
+ break;
|
|
+ case 16:
|
|
+ chan->mode |= DMAC_DCMD_SWDH_16;
|
|
+ break;
|
|
+ case 32:
|
|
+ chan->mode |= DMAC_DCMD_SWDH_32;
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+void jz_set_dma_block_size(int dmanr, int nbyte)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ chan->mode &= ~DMAC_DCMD_DS_MASK;
|
|
+ switch (nbyte) {
|
|
+ case 1:
|
|
+ chan->mode |= DMAC_DCMD_DS_8BIT;
|
|
+ break;
|
|
+ case 2:
|
|
+ chan->mode |= DMAC_DCMD_DS_16BIT;
|
|
+ break;
|
|
+ case 4:
|
|
+ chan->mode |= DMAC_DCMD_DS_32BIT;
|
|
+ break;
|
|
+ case 16:
|
|
+ chan->mode |= DMAC_DCMD_DS_16BYTE;
|
|
+ break;
|
|
+ case 32:
|
|
+ chan->mode |= DMAC_DCMD_DS_32BYTE;
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+unsigned int jz_get_dma_command(int dmanr)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+ return chan->mode;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * jz_set_dma_mode - do the raw settings for the specified DMA channel
|
|
+ * @dmanr: the specified DMA channel
|
|
+ * @mode: dma operate mode, DMA_MODE_READ or DMA_MODE_WRITE
|
|
+ * @dma_mode: dma raw mode
|
|
+ * @dma_source: dma raw request source
|
|
+ * @fifo_addr: dma raw device fifo address
|
|
+ *
|
|
+ * Ensure call jz_request_dma(DMA_ID_RAW_SET, ...) first, then call
|
|
+ * jz_set_dma_mode() rather than set_dma_mode() if you work with
|
|
+ * and external request dma device.
|
|
+ *
|
|
+ * NOTE: Don not dynamically allocate dma channel if one external request
|
|
+ * dma device will occupy this channel.
|
|
+*/
|
|
+int jz_set_dma_mode(unsigned int dmanr, unsigned int mode,
|
|
+ unsigned int dma_mode, unsigned int dma_source,
|
|
+ unsigned int fifo_addr)
|
|
+{
|
|
+ int dev_id, i;
|
|
+ struct jz_dma_chan *chan;
|
|
+
|
|
+ if (dmanr > MAX_DMA_NUM)
|
|
+ return -ENODEV;
|
|
+ for (i = 0; i < MAX_DMA_NUM; i++) {
|
|
+ if (jz_dma_table[i].dev_id < 0)
|
|
+ break;
|
|
+ }
|
|
+ if (i == MAX_DMA_NUM)
|
|
+ return -ENODEV;
|
|
+
|
|
+ chan = &jz_dma_table[dmanr];
|
|
+ dev_id = chan->dev_id;
|
|
+ if (dev_id > 0) {
|
|
+ printk(KERN_DEBUG "%s sets the allocated DMA channel %d!\n",
|
|
+ __FUNCTION__, dmanr);
|
|
+ return -ENODEV;
|
|
+ }
|
|
+
|
|
+ /* clone it from the dynamically allocated. */
|
|
+ if (i != dmanr) {
|
|
+ chan->irq = jz_dma_table[i].irq;
|
|
+ chan->irq_dev = jz_dma_table[i].irq_dev;
|
|
+ chan->dev_str = jz_dma_table[i].dev_str;
|
|
+ jz_dma_table[i].irq = 0;
|
|
+ jz_dma_table[i].irq_dev = NULL;
|
|
+ jz_dma_table[i].dev_id = -1;
|
|
+ }
|
|
+ chan->dev_id = DMA_ID_RAW_SET;
|
|
+ chan->io = dmanr;
|
|
+ chan->fifo_addr = fifo_addr;
|
|
+ chan->mode = dma_mode;
|
|
+ chan->source = dma_source;
|
|
+
|
|
+ set_dma_mode(dmanr, dma_mode);
|
|
+
|
|
+ return dmanr;
|
|
+}
|
|
+
|
|
+void enable_dma(unsigned int dmanr)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ REG_DMAC_DCCSR(dmanr) &= ~(DMAC_DCCSR_HLT | DMAC_DCCSR_TT | DMAC_DCCSR_AR);
|
|
+ REG_DMAC_DCCSR(dmanr) |= DMAC_DCCSR_NDES; /* No-descriptor transfer */
|
|
+ __dmac_enable_channel(dmanr);
|
|
+ if (chan->irq)
|
|
+ __dmac_channel_enable_irq(dmanr);
|
|
+}
|
|
+
|
|
+#define DMA_DISABLE_POLL 0x10000
|
|
+
|
|
+void disable_dma(unsigned int dmanr)
|
|
+{
|
|
+ int i;
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ if (!__dmac_channel_enabled(dmanr))
|
|
+ return;
|
|
+
|
|
+ for (i = 0; i < DMA_DISABLE_POLL; i++)
|
|
+ if (__dmac_channel_transmit_end_detected(dmanr))
|
|
+ break;
|
|
+#if 0
|
|
+ if (i == DMA_DISABLE_POLL)
|
|
+ printk(KERN_INFO "disable_dma: poll expired!\n");
|
|
+#endif
|
|
+
|
|
+ __dmac_disable_channel(dmanr);
|
|
+ if (chan->irq)
|
|
+ __dmac_channel_disable_irq(dmanr);
|
|
+}
|
|
+
|
|
+/* Note: DMA_MODE_MASK is simulated by sw */
|
|
+void set_dma_mode(unsigned int dmanr, unsigned int mode)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ chan->mode |= mode & ~(DMAC_DCMD_SAI | DMAC_DCMD_DAI);
|
|
+ mode &= DMA_MODE_MASK;
|
|
+ if (mode == DMA_MODE_READ) {
|
|
+ chan->mode |= DMAC_DCMD_DAI;
|
|
+ chan->mode &= ~DMAC_DCMD_SAI;
|
|
+ } else if (mode == DMA_MODE_WRITE) {
|
|
+ chan->mode |= DMAC_DCMD_SAI;
|
|
+ chan->mode &= ~DMAC_DCMD_DAI;
|
|
+ } else {
|
|
+ printk(KERN_DEBUG "set_dma_mode() just supports DMA_MODE_READ or DMA_MODE_WRITE!\n");
|
|
+ }
|
|
+ REG_DMAC_DCMD(chan->io) = chan->mode & ~DMA_MODE_MASK;
|
|
+ REG_DMAC_DRSR(chan->io) = chan->source;
|
|
+}
|
|
+
|
|
+void set_dma_addr(unsigned int dmanr, unsigned int phyaddr)
|
|
+{
|
|
+ unsigned int mode;
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ mode = chan->mode & DMA_MODE_MASK;
|
|
+ if (mode == DMA_MODE_READ) {
|
|
+ REG_DMAC_DSAR(chan->io) = chan->fifo_addr;
|
|
+ REG_DMAC_DTAR(chan->io) = phyaddr;
|
|
+ } else if (mode == DMA_MODE_WRITE) {
|
|
+ REG_DMAC_DSAR(chan->io) = phyaddr;
|
|
+ REG_DMAC_DTAR(chan->io) = chan->fifo_addr;
|
|
+ } else
|
|
+ printk(KERN_DEBUG "Driver should call set_dma_mode() ahead set_dma_addr()!\n");
|
|
+}
|
|
+
|
|
+void set_dma_count(unsigned int dmanr, unsigned int bytecnt)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+ int dma_ds[] = {4, 1, 2, 16, 32};
|
|
+ unsigned int ds;
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ ds = (chan->mode & DMAC_DCMD_DS_MASK) >> DMAC_DCMD_DS_BIT;
|
|
+ REG_DMAC_DTCR(chan->io) = bytecnt / dma_ds[ds]; // transfer count
|
|
+}
|
|
+
|
|
+unsigned int get_dma_residue(unsigned int dmanr)
|
|
+{
|
|
+ unsigned int count, ds;
|
|
+ int dma_ds[] = {4, 1, 2, 16, 32};
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+ if (!chan)
|
|
+ return 0;
|
|
+
|
|
+ ds = (chan->mode & DMAC_DCMD_DS_MASK) >> DMAC_DCMD_DS_BIT;
|
|
+ count = REG_DMAC_DTCR(chan->io);
|
|
+ count = count * dma_ds[ds];
|
|
+
|
|
+ return count;
|
|
+}
|
|
+
|
|
+void jz_set_oss_dma(unsigned int dmanr, unsigned int mode, unsigned int audio_fmt)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ switch (audio_fmt) {
|
|
+ case AFMT_U8:
|
|
+ /* burst mode : 32BIT */
|
|
+ break;
|
|
+ case AFMT_S16_LE:
|
|
+ /* burst mode : 16BYTE */
|
|
+ if (mode == DMA_MODE_READ) {
|
|
+ chan->mode = DMA_AIC_32_16BYTE_RX_CMD | DMA_MODE_READ;
|
|
+ chan->mode |= mode & ~(DMAC_DCMD_SAI | DMAC_DCMD_DAI);
|
|
+ mode &= DMA_MODE_MASK;
|
|
+ chan->mode |= DMAC_DCMD_DAI;
|
|
+ chan->mode &= ~DMAC_DCMD_SAI;
|
|
+ } else if (mode == DMA_MODE_WRITE) {
|
|
+ chan->mode = DMA_AIC_32_16BYTE_TX_CMD | DMA_MODE_WRITE;
|
|
+ //chan->mode = DMA_AIC_16BYTE_TX_CMD | DMA_MODE_WRITE;
|
|
+ chan->mode |= mode & ~(DMAC_DCMD_SAI | DMAC_DCMD_DAI);
|
|
+ mode &= DMA_MODE_MASK;
|
|
+ chan->mode |= DMAC_DCMD_SAI;
|
|
+ chan->mode &= ~DMAC_DCMD_DAI;
|
|
+ } else
|
|
+ printk("oss_dma_burst_mode() just supports DMA_MODE_READ or DMA_MODE_WRITE!\n");
|
|
+
|
|
+ REG_DMAC_DCMD(chan->io) = chan->mode & ~DMA_MODE_MASK;
|
|
+ REG_DMAC_DRSR(chan->io) = chan->source;
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+void jz_set_alsa_dma(unsigned int dmanr, unsigned int mode, unsigned int audio_fmt)
|
|
+{
|
|
+ struct jz_dma_chan *chan = get_dma_chan(dmanr);
|
|
+
|
|
+ if (!chan)
|
|
+ return;
|
|
+
|
|
+ switch (audio_fmt) {
|
|
+ case 8:
|
|
+ /* SNDRV_PCM_FORMAT_S8 burst mode : 32BIT */
|
|
+ break;
|
|
+ case 16:
|
|
+ /* SNDRV_PCM_FORMAT_S16_LE burst mode : 16BYTE */
|
|
+ if (mode == DMA_MODE_READ) {
|
|
+ chan->mode = DMA_AIC_16BYTE_RX_CMD | DMA_MODE_READ;
|
|
+ chan->mode |= mode & ~(DMAC_DCMD_SAI | DMAC_DCMD_DAI);
|
|
+ mode &= DMA_MODE_MASK;
|
|
+ chan->mode |= DMAC_DCMD_DAI;
|
|
+ chan->mode &= ~DMAC_DCMD_SAI;
|
|
+ } else if (mode == DMA_MODE_WRITE) {
|
|
+ chan->mode = DMA_AIC_16BYTE_TX_CMD | DMA_MODE_WRITE;
|
|
+ chan->mode |= mode & ~(DMAC_DCMD_SAI | DMAC_DCMD_DAI);
|
|
+ mode &= DMA_MODE_MASK;
|
|
+ chan->mode |= DMAC_DCMD_SAI;
|
|
+ chan->mode &= ~DMAC_DCMD_DAI;
|
|
+ } else
|
|
+ printk("alsa_dma_burst_mode() just supports DMA_MODE_READ or DMA_MODE_WRITE!\n");
|
|
+
|
|
+ REG_DMAC_DCMD(chan->io) = chan->mode & ~DMA_MODE_MASK;
|
|
+ REG_DMAC_DRSR(chan->io) = chan->source;
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+//#define JZ4750D_DMAC_TEST_ENABLE
|
|
+#undef JZ4750D_DMAC_TEST_ENABLE
|
|
+
|
|
+#ifdef JZ4750D_DMAC_TEST_ENABLE
|
|
+
|
|
+/*
|
|
+ * DMA test: external address <--> external address
|
|
+ */
|
|
+#define TEST_DMA_SIZE 16*1024
|
|
+
|
|
+static jz_dma_desc *dma_desc;
|
|
+
|
|
+static int dma_chan;
|
|
+static dma_addr_t dma_desc_phys_addr;
|
|
+static unsigned int dma_src_addr, dma_src_phys_addr, dma_dst_addr, dma_dst_phys_addr;
|
|
+
|
|
+static int dma_check_result(void *src, void *dst, int size)
|
|
+{
|
|
+ unsigned int addr1, addr2, i, err = 0;
|
|
+
|
|
+ addr1 = (unsigned int)src;
|
|
+ addr2 = (unsigned int)dst;
|
|
+
|
|
+ for (i = 0; i < size; i += 4) {
|
|
+ if (*(volatile unsigned int *)addr1 != *(volatile unsigned int *)addr2) {
|
|
+ err++;
|
|
+ printk("wrong data at 0x%08x: src 0x%08x dst 0x%08x\n", addr2, *(volatile unsigned int *)addr1, *(volatile unsigned int *)addr2);
|
|
+ }
|
|
+ addr1 += 4;
|
|
+ addr2 += 4;
|
|
+ }
|
|
+ printk("check DMA result err=%d\n", err);
|
|
+ return err;
|
|
+}
|
|
+
|
|
+static irqreturn_t jz4750d_dma_irq(int irq, void *dev_id)
|
|
+{
|
|
+ printk("jz4750d_dma_irq %d\n", irq);
|
|
+
|
|
+
|
|
+ if (__dmac_channel_transmit_halt_detected(dma_chan)) {
|
|
+ printk("DMA HALT\n");
|
|
+ REG_DMAC_DCCSR(dma_chan) &= ~DMAC_DCCSR_EN; /* disable DMA */
|
|
+ __dmac_channel_clear_transmit_halt(dma_chan);
|
|
+ }
|
|
+
|
|
+ if (__dmac_channel_address_error_detected(dma_chan)) {
|
|
+ printk("DMA ADDR ERROR\n");
|
|
+ REG_DMAC_DCCSR(dma_chan) &= ~DMAC_DCCSR_EN; /* disable DMA */
|
|
+ REG_DMAC_DSAR(dma_chan) = 0; /* clear source address register */
|
|
+ REG_DMAC_DTAR(dma_chan) = 0; /* clear target address register */
|
|
+ __dmac_channel_clear_address_error(dma_chan);
|
|
+ }
|
|
+
|
|
+ if (__dmac_channel_descriptor_invalid_detected(dma_chan)) {
|
|
+ REG_DMAC_DCCSR(dma_chan) &= ~DMAC_DCCSR_EN; /* disable DMA */
|
|
+ printk("DMA DESC INVALID\n");
|
|
+ __dmac_channel_clear_descriptor_invalid(dma_chan);
|
|
+ }
|
|
+
|
|
+ if (__dmac_channel_count_terminated_detected(dma_chan)) {
|
|
+ printk("DMA CT\n");
|
|
+ __dmac_channel_clear_count_terminated(dma_chan);
|
|
+ }
|
|
+
|
|
+ if (__dmac_channel_transmit_end_detected(dma_chan)) {
|
|
+ REG_DMAC_DCCSR(dma_chan) &= ~DMAC_DCCSR_EN; /* disable DMA */
|
|
+ printk("DMA TT\n");
|
|
+ __dmac_channel_clear_transmit_end(dma_chan);
|
|
+ dump_jz_dma_channel(dma_chan);
|
|
+ dma_check_result((void *)dma_src_addr, (void *)dma_dst_addr, TEST_DMA_SIZE);
|
|
+ }
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+void dma_nodesc_test(void)
|
|
+{
|
|
+ unsigned int addr, i;
|
|
+
|
|
+ printk("dma_nodesc_test\n");
|
|
+
|
|
+ /* Request DMA channel and setup irq handler */
|
|
+ dma_chan = jz_request_dma(DMA_ID_AUTO, "auto", jz4750d_dma_irq,
|
|
+ IRQF_DISABLED, NULL);
|
|
+ if (dma_chan < 0) {
|
|
+ printk("Setup irq failed\n");
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ printk("Requested DMA channel = %d\n", dma_chan);
|
|
+
|
|
+ /* Allocate DMA buffers */
|
|
+ dma_src_addr = __get_free_pages(GFP_KERNEL, 2); /* 16KB */
|
|
+ dma_dst_addr = __get_free_pages(GFP_KERNEL, 2); /* 16KB */
|
|
+
|
|
+ dma_src_phys_addr = CPHYSADDR(dma_src_addr);
|
|
+ dma_dst_phys_addr = CPHYSADDR(dma_dst_addr);
|
|
+
|
|
+ printk("Buffer addresses: 0x%08x 0x%08x 0x%08x 0x%08x\n",
|
|
+ dma_src_addr, dma_src_phys_addr, dma_dst_addr, dma_dst_phys_addr);
|
|
+
|
|
+ /* Prepare data for source buffer */
|
|
+ addr = (unsigned int)dma_src_addr;
|
|
+ for (i = 0; i < TEST_DMA_SIZE; i += 4) {
|
|
+ *(volatile unsigned int *)addr = addr;
|
|
+ addr += 4;
|
|
+ }
|
|
+ dma_cache_wback((unsigned long)dma_src_addr, TEST_DMA_SIZE);
|
|
+
|
|
+ /* Init target buffer */
|
|
+ memset((void *)dma_dst_addr, 0, TEST_DMA_SIZE);
|
|
+ dma_cache_wback((unsigned long)dma_dst_addr, TEST_DMA_SIZE);
|
|
+
|
|
+ /* Init DMA module */
|
|
+ printk("Starting DMA\n");
|
|
+ REG_DMAC_DMACR(dma_chan/HALF_DMA_NUM) = 0;
|
|
+ REG_DMAC_DCCSR(dma_chan) = 0;
|
|
+ REG_DMAC_DRSR(dma_chan) = DMAC_DRSR_RS_AUTO;
|
|
+ REG_DMAC_DSAR(dma_chan) = dma_src_phys_addr;
|
|
+ REG_DMAC_DTAR(dma_chan) = dma_dst_phys_addr;
|
|
+ REG_DMAC_DTCR(dma_chan) = 512;
|
|
+ REG_DMAC_DCMD(dma_chan) = DMAC_DCMD_SAI | DMAC_DCMD_DAI | DMAC_DCMD_SWDH_32 | DMAC_DCMD_DWDH_32 | DMAC_DCMD_DS_32BYTE | DMAC_DCMD_TIE;
|
|
+ REG_DMAC_DCCSR(dma_chan) = DMAC_DCCSR_NDES | DMAC_DCCSR_EN;
|
|
+ REG_DMAC_DMACR(dma_chan/HALF_DMA_NUM) = DMAC_DMACR_DMAE; /* global DMA enable bit */
|
|
+
|
|
+ printk("DMA started. IMR=%08x\n", REG_INTC_IMR);
|
|
+
|
|
+ /* wait a long time, ensure transfer end */
|
|
+ printk("wait 3s...\n");
|
|
+ mdelay(3000); /* wait 3s */
|
|
+
|
|
+ REG_DMAC_DCCSR(dma_chan) &= ~DMAC_DCCSR_EN; /* disable DMA */
|
|
+ /* free buffers */
|
|
+ printk("free DMA buffers\n");
|
|
+ free_pages(dma_src_addr, 2);
|
|
+ free_pages(dma_dst_addr, 2);
|
|
+
|
|
+ if (dma_desc)
|
|
+ free_pages((unsigned int)dma_desc, 0);
|
|
+
|
|
+ /* free dma */
|
|
+ jz_free_dma(dma_chan);
|
|
+}
|
|
+
|
|
+void dma_desc_test(void)
|
|
+{
|
|
+ unsigned int next, addr, i;
|
|
+ static jz_dma_desc *desc;
|
|
+
|
|
+ printk("dma_desc_test\n");
|
|
+
|
|
+ /* Request DMA channel and setup irq handler */
|
|
+ dma_chan = jz_request_dma(DMA_ID_AUTO, "auto", jz4750d_dma_irq,
|
|
+ IRQF_DISABLED, NULL);
|
|
+ if (dma_chan < 0) {
|
|
+ printk("Setup irq failed\n");
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ printk("Requested DMA channel = %d\n", dma_chan);
|
|
+
|
|
+ /* Allocate DMA buffers */
|
|
+ dma_src_addr = __get_free_pages(GFP_KERNEL, 2); /* 16KB */
|
|
+ dma_dst_addr = __get_free_pages(GFP_KERNEL, 2); /* 16KB */
|
|
+
|
|
+ dma_src_phys_addr = CPHYSADDR(dma_src_addr);
|
|
+ dma_dst_phys_addr = CPHYSADDR(dma_dst_addr);
|
|
+
|
|
+ printk("Buffer addresses: 0x%08x 0x%08x 0x%08x 0x%08x\n",
|
|
+ dma_src_addr, dma_src_phys_addr, dma_dst_addr, dma_dst_phys_addr);
|
|
+
|
|
+ /* Prepare data for source buffer */
|
|
+ addr = (unsigned int)dma_src_addr;
|
|
+ for (i = 0; i < TEST_DMA_SIZE; i += 4) {
|
|
+ *(volatile unsigned int *)addr = addr;
|
|
+ addr += 4;
|
|
+ }
|
|
+ dma_cache_wback((unsigned long)dma_src_addr, TEST_DMA_SIZE);
|
|
+
|
|
+ /* Init target buffer */
|
|
+ memset((void *)dma_dst_addr, 0, TEST_DMA_SIZE);
|
|
+ dma_cache_wback((unsigned long)dma_dst_addr, TEST_DMA_SIZE);
|
|
+
|
|
+ /* Allocate DMA descriptors */
|
|
+ dma_desc = (jz_dma_desc *)__get_free_pages(GFP_KERNEL, 0);
|
|
+ dma_desc_phys_addr = CPHYSADDR((unsigned long)dma_desc);
|
|
+
|
|
+ printk("DMA descriptor address: 0x%08x 0x%08x\n", (u32)dma_desc, dma_desc_phys_addr);
|
|
+
|
|
+ /* Setup DMA descriptors */
|
|
+ desc = dma_desc;
|
|
+ next = (dma_desc_phys_addr + (sizeof(jz_dma_desc))) >> 4;
|
|
+
|
|
+ desc->dcmd = DMAC_DCMD_SAI | DMAC_DCMD_DAI | DMAC_DCMD_RDIL_IGN | DMAC_DCMD_SWDH_32 | DMAC_DCMD_DWDH_32 | DMAC_DCMD_DS_32BYTE | DMAC_DCMD_DES_V | DMAC_DCMD_DES_VM | DMAC_DCMD_DES_VIE | DMAC_DCMD_TIE | DMAC_DCMD_LINK;
|
|
+ desc->dsadr = dma_src_phys_addr; /* DMA source address */
|
|
+ desc->dtadr = dma_dst_phys_addr; /* DMA target address */
|
|
+ desc->ddadr = (next << 24) + 128; /* size: 128*32 bytes = 4096 bytes */
|
|
+
|
|
+ desc++;
|
|
+ next = (dma_desc_phys_addr + 2*(sizeof(jz_dma_desc))) >> 4;
|
|
+
|
|
+ desc->dcmd = DMAC_DCMD_SAI | DMAC_DCMD_DAI | DMAC_DCMD_RDIL_IGN | DMAC_DCMD_SWDH_32 | DMAC_DCMD_DWDH_32 | DMAC_DCMD_DS_16BYTE | DMAC_DCMD_DES_V | DMAC_DCMD_DES_VM | DMAC_DCMD_DES_VIE | DMAC_DCMD_TIE | DMAC_DCMD_LINK;
|
|
+ desc->dsadr = dma_src_phys_addr + 4096; /* DMA source address */
|
|
+ desc->dtadr = dma_dst_phys_addr + 4096; /* DMA target address */
|
|
+ desc->ddadr = (next << 24) + 256; /* size: 256*16 bytes = 4096 bytes */
|
|
+
|
|
+ desc++;
|
|
+ next = (dma_desc_phys_addr + 3*(sizeof(jz_dma_desc))) >> 4;
|
|
+
|
|
+ desc->dcmd = DMAC_DCMD_SAI | DMAC_DCMD_DAI | DMAC_DCMD_RDIL_IGN | DMAC_DCMD_SWDH_32 | DMAC_DCMD_DWDH_32 | DMAC_DCMD_DS_16BYTE | DMAC_DCMD_DES_V | DMAC_DCMD_DES_VM | DMAC_DCMD_DES_VIE | DMAC_DCMD_TIE | DMAC_DCMD_LINK;
|
|
+ desc->dsadr = dma_src_phys_addr + 8192; /* DMA source address */
|
|
+ desc->dtadr = dma_dst_phys_addr + 8192; /* DMA target address */
|
|
+ desc->ddadr = (next << 24) + 256; /* size: 256*16 bytes = 4096 bytes */
|
|
+
|
|
+ desc++;
|
|
+ next = (dma_desc_phys_addr + 4*(sizeof(jz_dma_desc))) >> 4;
|
|
+
|
|
+ desc->dcmd = DMAC_DCMD_SAI | DMAC_DCMD_DAI | DMAC_DCMD_RDIL_IGN | DMAC_DCMD_SWDH_32 | DMAC_DCMD_DWDH_32 | DMAC_DCMD_DS_32BIT | DMAC_DCMD_DES_V | DMAC_DCMD_DES_VM | DMAC_DCMD_DES_VIE | DMAC_DCMD_TIE;
|
|
+ desc->dsadr = dma_src_phys_addr + 12*1024; /* DMA source address */
|
|
+ desc->dtadr = dma_dst_phys_addr + 12*1024; /* DMA target address */
|
|
+ desc->ddadr = (next << 24) + 1024; /* size: 1024*4 bytes = 4096 bytes */
|
|
+
|
|
+ dma_cache_wback((unsigned long)dma_desc, 4*(sizeof(jz_dma_desc)));
|
|
+
|
|
+ /* Setup DMA descriptor address */
|
|
+ REG_DMAC_DDA(dma_chan) = dma_desc_phys_addr;
|
|
+
|
|
+ /* Setup request source */
|
|
+ REG_DMAC_DRSR(dma_chan) = DMAC_DRSR_RS_AUTO;
|
|
+
|
|
+ /* Setup DMA channel control/status register */
|
|
+ REG_DMAC_DCCSR(dma_chan) = DMAC_DCCSR_EN; /* descriptor transfer, clear status, start channel */
|
|
+
|
|
+ /* Enable DMA */
|
|
+ REG_DMAC_DMACR(dma_chan/HALF_DMA_NUM) = DMAC_DMACR_DMAE;
|
|
+
|
|
+ /* DMA doorbell set -- start DMA now ... */
|
|
+ REG_DMAC_DMADBSR(dma_chan/HALF_DMA_NUM) = 1 << dma_chan;
|
|
+
|
|
+ printk("DMA started. IMR=%08x\n", REG_INTC_IMR);
|
|
+ /* wait a long time, ensure transfer end */
|
|
+ printk("wait 3s...\n");
|
|
+ mdelay(3000); /* wait 3s */
|
|
+
|
|
+ REG_DMAC_DCCSR(dma_chan) &= ~DMAC_DCCSR_EN; /* disable DMA */
|
|
+ /* free buffers */
|
|
+ printk("free DMA buffers\n");
|
|
+ free_pages(dma_src_addr, 2);
|
|
+ free_pages(dma_dst_addr, 2);
|
|
+
|
|
+ if (dma_desc)
|
|
+ free_pages((unsigned int)dma_desc, 0);
|
|
+
|
|
+ /* free dma */
|
|
+ jz_free_dma(dma_chan);
|
|
+}
|
|
+
|
|
+#endif
|
|
+
|
|
+//EXPORT_SYMBOL_NOVERS(jz_dma_table);
|
|
+EXPORT_SYMBOL(jz_dma_table);
|
|
+EXPORT_SYMBOL(jz_request_dma);
|
|
+EXPORT_SYMBOL(jz_free_dma);
|
|
+EXPORT_SYMBOL(jz_set_dma_src_width);
|
|
+EXPORT_SYMBOL(jz_set_dma_dest_width);
|
|
+EXPORT_SYMBOL(jz_set_dma_block_size);
|
|
+EXPORT_SYMBOL(jz_set_dma_mode);
|
|
+EXPORT_SYMBOL(set_dma_mode);
|
|
+EXPORT_SYMBOL(jz_set_oss_dma);
|
|
+EXPORT_SYMBOL(jz_set_alsa_dma);
|
|
+EXPORT_SYMBOL(set_dma_addr);
|
|
+EXPORT_SYMBOL(set_dma_count);
|
|
+EXPORT_SYMBOL(get_dma_residue);
|
|
+EXPORT_SYMBOL(enable_dma);
|
|
+EXPORT_SYMBOL(disable_dma);
|
|
+EXPORT_SYMBOL(dump_jz_dma_channel);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750d/i2c.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750d/i2c.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,273 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4750d/i2c.c
|
|
+ *
|
|
+ * Jz4750D I2C routines.
|
|
+ *
|
|
+ * Copyright (C) 2005,2006 Ingenic Semiconductor Inc.
|
|
+ * Author: <lhhuang@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can distribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License (Version 2) as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ * This program is distributed in the hope it will be useful, but WITHOUT
|
|
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
+ * for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License along
|
|
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
|
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
|
|
+ *
|
|
+ */
|
|
+#include <linux/module.h>
|
|
+#include <linux/types.h>
|
|
+#include <linux/delay.h>
|
|
+#include <asm/uaccess.h>
|
|
+#include <asm/addrspace.h>
|
|
+
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+/* I2C protocol */
|
|
+#define I2C_READ 1
|
|
+#define I2C_WRITE 0
|
|
+
|
|
+#define TIMEOUT 1000
|
|
+
|
|
+/*
|
|
+ * I2C bus protocol basic routines
|
|
+ */
|
|
+static int i2c_put_data(unsigned char data)
|
|
+{
|
|
+ unsigned int timeout = TIMEOUT*10;
|
|
+
|
|
+ __i2c_write(data);
|
|
+ __i2c_set_drf();
|
|
+ while (__i2c_check_drf() != 0);
|
|
+ while (!__i2c_transmit_ended());
|
|
+ while (!__i2c_received_ack() && timeout)
|
|
+ timeout--;
|
|
+
|
|
+ if (timeout)
|
|
+ return 0;
|
|
+ else
|
|
+ return -ETIMEDOUT;
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_JZ_TPANEL_ATA2508
|
|
+static int i2c_put_data_nack(unsigned char data)
|
|
+{
|
|
+ unsigned int timeout = TIMEOUT*10;
|
|
+
|
|
+ __i2c_write(data);
|
|
+ __i2c_set_drf();
|
|
+ while (__i2c_check_drf() != 0);
|
|
+ while (!__i2c_transmit_ended());
|
|
+ while (timeout--);
|
|
+ return 0;
|
|
+}
|
|
+#endif
|
|
+
|
|
+static int i2c_get_data(unsigned char *data, int ack)
|
|
+{
|
|
+ int timeout = TIMEOUT*10;
|
|
+
|
|
+ if (!ack)
|
|
+ __i2c_send_nack();
|
|
+ else
|
|
+ __i2c_send_ack();
|
|
+
|
|
+ while (__i2c_check_drf() == 0 && timeout)
|
|
+ timeout--;
|
|
+
|
|
+ if (timeout) {
|
|
+ if (!ack)
|
|
+ __i2c_send_stop();
|
|
+ *data = __i2c_read();
|
|
+ __i2c_clear_drf();
|
|
+ return 0;
|
|
+ } else
|
|
+ return -ETIMEDOUT;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * I2C interface
|
|
+ */
|
|
+void i2c_open(void)
|
|
+{
|
|
+ __i2c_set_clk(jz_clocks.extalclk, 10000); /* default 10 KHz */
|
|
+ __i2c_enable();
|
|
+}
|
|
+
|
|
+void i2c_close(void)
|
|
+{
|
|
+ udelay(300); /* wait for STOP goes over. */
|
|
+ __i2c_disable();
|
|
+}
|
|
+
|
|
+void i2c_setclk(unsigned int i2cclk)
|
|
+{
|
|
+ __i2c_set_clk(jz_clocks.extalclk, i2cclk);
|
|
+}
|
|
+
|
|
+int i2c_lseek(unsigned char device, unsigned char offset)
|
|
+{
|
|
+ __i2c_send_nack(); /* Master does not send ACK, slave sends it */
|
|
+ __i2c_send_start();
|
|
+ if (i2c_put_data( (device << 1) | I2C_WRITE ) < 0)
|
|
+ goto device_err;
|
|
+ if (i2c_put_data(offset) < 0)
|
|
+ goto address_err;
|
|
+ return 0;
|
|
+ device_err:
|
|
+ printk(KERN_DEBUG "No I2C device (0x%02x) installed.\n", device);
|
|
+ __i2c_send_stop();
|
|
+ return -ENODEV;
|
|
+ address_err:
|
|
+ printk(KERN_DEBUG "No I2C device (0x%02x) response.\n", device);
|
|
+ __i2c_send_stop();
|
|
+ return -EREMOTEIO;
|
|
+}
|
|
+
|
|
+int i2c_read(unsigned char device, unsigned char *buf,
|
|
+ unsigned char address, int count)
|
|
+{
|
|
+ int cnt = count;
|
|
+ int timeout = 5;
|
|
+
|
|
+L_try_again:
|
|
+
|
|
+ if (timeout < 0)
|
|
+ goto L_timeout;
|
|
+
|
|
+ __i2c_send_nack(); /* Master does not send ACK, slave sends it */
|
|
+ __i2c_send_start();
|
|
+ if (i2c_put_data( (device << 1) | I2C_WRITE ) < 0)
|
|
+ goto device_werr;
|
|
+ if (i2c_put_data(address) < 0)
|
|
+ goto address_err;
|
|
+
|
|
+ __i2c_send_start();
|
|
+ if (i2c_put_data( (device << 1) | I2C_READ ) < 0)
|
|
+ goto device_rerr;
|
|
+ __i2c_send_ack(); /* Master sends ACK for continue reading */
|
|
+ while (cnt) {
|
|
+ if (cnt == 1) {
|
|
+ if (i2c_get_data(buf, 0) < 0)
|
|
+ break;
|
|
+ } else {
|
|
+ if (i2c_get_data(buf, 1) < 0)
|
|
+ break;
|
|
+ }
|
|
+ cnt--;
|
|
+ buf++;
|
|
+ }
|
|
+
|
|
+ __i2c_send_stop();
|
|
+ return count - cnt;
|
|
+ device_rerr:
|
|
+ device_werr:
|
|
+ address_err:
|
|
+ timeout --;
|
|
+ __i2c_send_stop();
|
|
+ goto L_try_again;
|
|
+
|
|
+L_timeout:
|
|
+ __i2c_send_stop();
|
|
+ printk("Read I2C device 0x%2x failed.\n", device);
|
|
+ return -ENODEV;
|
|
+}
|
|
+
|
|
+int i2c_write(unsigned char device, unsigned char *buf,
|
|
+ unsigned char address, int count)
|
|
+{
|
|
+ int cnt = count;
|
|
+ int cnt_in_pg;
|
|
+ int timeout = 5;
|
|
+ unsigned char *tmpbuf;
|
|
+ unsigned char tmpaddr;
|
|
+
|
|
+ __i2c_send_nack(); /* Master does not send ACK, slave sends it */
|
|
+
|
|
+ W_try_again:
|
|
+ if (timeout < 0)
|
|
+ goto W_timeout;
|
|
+
|
|
+ cnt = count;
|
|
+ tmpbuf = (unsigned char *)buf;
|
|
+ tmpaddr = address;
|
|
+
|
|
+ start_write_page:
|
|
+ cnt_in_pg = 0;
|
|
+ __i2c_send_start();
|
|
+ if (i2c_put_data( (device << 1) | I2C_WRITE ) < 0)
|
|
+ goto device_err;
|
|
+#ifdef CONFIG_JZ_TPANEL_ATA2508
|
|
+ if (address == 0xff) {
|
|
+ if (i2c_put_data_nack(tmpaddr) < 0)
|
|
+ goto address_err;
|
|
+ while (cnt) {
|
|
+ if (++cnt_in_pg > 8) {
|
|
+ __i2c_send_stop();
|
|
+ mdelay(1);
|
|
+ tmpaddr += 8;
|
|
+ goto start_write_page;
|
|
+ }
|
|
+ if (i2c_put_data_nack(*tmpbuf) < 0)
|
|
+ break;
|
|
+ cnt--;
|
|
+ tmpbuf++;
|
|
+ }
|
|
+ }
|
|
+ else {
|
|
+
|
|
+ if (i2c_put_data(tmpaddr) < 0)
|
|
+ goto address_err;
|
|
+ while (cnt) {
|
|
+ if (++cnt_in_pg > 8) {
|
|
+ __i2c_send_stop();
|
|
+ mdelay(1);
|
|
+ tmpaddr += 8;
|
|
+ goto start_write_page;
|
|
+ }
|
|
+ if (i2c_put_data(*tmpbuf) < 0)
|
|
+ break;
|
|
+ cnt--;
|
|
+ tmpbuf++;
|
|
+ }
|
|
+ }
|
|
+#else
|
|
+ if (i2c_put_data(tmpaddr) < 0)
|
|
+ goto address_err;
|
|
+ while (cnt) {
|
|
+ if (++cnt_in_pg > 8) {
|
|
+ __i2c_send_stop();
|
|
+ mdelay(1);
|
|
+ tmpaddr += 8;
|
|
+ goto start_write_page;
|
|
+ }
|
|
+ if (i2c_put_data(*tmpbuf) < 0)
|
|
+ break;
|
|
+ cnt--;
|
|
+ tmpbuf++;
|
|
+ }
|
|
+#endif
|
|
+ __i2c_send_stop();
|
|
+ return count - cnt;
|
|
+ device_err:
|
|
+ address_err:
|
|
+ timeout--;
|
|
+ __i2c_send_stop();
|
|
+ goto W_try_again;
|
|
+
|
|
+ W_timeout:
|
|
+ printk(KERN_DEBUG "Write I2C device 0x%2x failed.\n", device);
|
|
+ __i2c_send_stop();
|
|
+ return -ENODEV;
|
|
+}
|
|
+
|
|
+EXPORT_SYMBOL(i2c_open);
|
|
+EXPORT_SYMBOL(i2c_close);
|
|
+EXPORT_SYMBOL(i2c_setclk);
|
|
+EXPORT_SYMBOL(i2c_read);
|
|
+EXPORT_SYMBOL(i2c_write);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750d/irq.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750d/irq.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,299 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4750d/irq.c
|
|
+ *
|
|
+ * JZ4750D interrupt routines.
|
|
+ *
|
|
+ * Copyright (c) 2006-2007 Ingenic Semiconductor Inc.
|
|
+ * Author: <lhhuang@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License as published by the
|
|
+ * Free Software Foundation; either version 2 of the License, or (at your
|
|
+ * option) any later version.
|
|
+ */
|
|
+#include <linux/errno.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/irq.h>
|
|
+#include <linux/kernel_stat.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/signal.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/types.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/timex.h>
|
|
+#include <linux/slab.h>
|
|
+#include <linux/random.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/bitops.h>
|
|
+
|
|
+#include <asm/bootinfo.h>
|
|
+#include <asm/io.h>
|
|
+#include <asm/mipsregs.h>
|
|
+#include <asm/system.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+/*
|
|
+ * INTC irq type
|
|
+ */
|
|
+
|
|
+static void enable_intc_irq(unsigned int irq)
|
|
+{
|
|
+ __intc_unmask_irq(irq);
|
|
+}
|
|
+
|
|
+static void disable_intc_irq(unsigned int irq)
|
|
+{
|
|
+ __intc_mask_irq(irq);
|
|
+}
|
|
+
|
|
+static void mask_and_ack_intc_irq(unsigned int irq)
|
|
+{
|
|
+ __intc_mask_irq(irq);
|
|
+ __intc_ack_irq(irq);
|
|
+}
|
|
+
|
|
+static void end_intc_irq(unsigned int irq)
|
|
+{
|
|
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
|
|
+ enable_intc_irq(irq);
|
|
+ }
|
|
+}
|
|
+
|
|
+static unsigned int startup_intc_irq(unsigned int irq)
|
|
+{
|
|
+ enable_intc_irq(irq);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void shutdown_intc_irq(unsigned int irq)
|
|
+{
|
|
+ disable_intc_irq(irq);
|
|
+}
|
|
+
|
|
+static struct irq_chip intc_irq_type = {
|
|
+ .typename = "INTC",
|
|
+ .startup = startup_intc_irq,
|
|
+ .shutdown = shutdown_intc_irq,
|
|
+ .enable = enable_intc_irq,
|
|
+ .disable = disable_intc_irq,
|
|
+ .ack = mask_and_ack_intc_irq,
|
|
+ .end = end_intc_irq,
|
|
+};
|
|
+
|
|
+/*
|
|
+ * GPIO irq type
|
|
+ */
|
|
+
|
|
+static void enable_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ unsigned int intc_irq;
|
|
+
|
|
+ if (irq < (IRQ_GPIO_0 + 32)) {
|
|
+ intc_irq = IRQ_GPIO0;
|
|
+ }
|
|
+ else if (irq < (IRQ_GPIO_0 + 64)) {
|
|
+ intc_irq = IRQ_GPIO1;
|
|
+ }
|
|
+ else if (irq < (IRQ_GPIO_0 + 96)) {
|
|
+ intc_irq = IRQ_GPIO2;
|
|
+ }
|
|
+ else if (irq < (IRQ_GPIO_0 + 128)) {
|
|
+ intc_irq = IRQ_GPIO3;
|
|
+ }
|
|
+ else if (irq < (IRQ_GPIO_0 + 160)) {
|
|
+ intc_irq = IRQ_GPIO4;
|
|
+ }
|
|
+ else {
|
|
+ intc_irq = IRQ_GPIO5;
|
|
+ }
|
|
+
|
|
+ enable_intc_irq(intc_irq);
|
|
+ __gpio_unmask_irq(irq - IRQ_GPIO_0);
|
|
+}
|
|
+
|
|
+static void disable_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ __gpio_mask_irq(irq - IRQ_GPIO_0);
|
|
+}
|
|
+
|
|
+static void mask_and_ack_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ __gpio_mask_irq(irq - IRQ_GPIO_0);
|
|
+ __gpio_ack_irq(irq - IRQ_GPIO_0);
|
|
+}
|
|
+
|
|
+static void end_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
|
|
+ enable_gpio_irq(irq);
|
|
+ }
|
|
+}
|
|
+
|
|
+static unsigned int startup_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ enable_gpio_irq(irq);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void shutdown_gpio_irq(unsigned int irq)
|
|
+{
|
|
+ disable_gpio_irq(irq);
|
|
+}
|
|
+
|
|
+static struct irq_chip gpio_irq_type = {
|
|
+ .typename = "GPIO",
|
|
+ .startup = startup_gpio_irq,
|
|
+ .shutdown = shutdown_gpio_irq,
|
|
+ .enable = enable_gpio_irq,
|
|
+ .disable = disable_gpio_irq,
|
|
+ .ack = mask_and_ack_gpio_irq,
|
|
+ .end = end_gpio_irq,
|
|
+};
|
|
+
|
|
+/*
|
|
+ * DMA irq type
|
|
+ */
|
|
+
|
|
+static void enable_dma_irq(unsigned int irq)
|
|
+{
|
|
+ unsigned int intc_irq;
|
|
+
|
|
+ if ( irq < (IRQ_DMA_0 + HALF_DMA_NUM) ) /* DMAC Group 0 irq */
|
|
+ intc_irq = IRQ_DMAC0;
|
|
+ else if ( irq < (IRQ_DMA_0 + MAX_DMA_NUM) ) /* DMAC Group 1 irq */
|
|
+ intc_irq = IRQ_DMAC1;
|
|
+ else {
|
|
+ printk("%s, unexpected dma irq #%d\n", __FILE__, irq);
|
|
+ return;
|
|
+ }
|
|
+ __intc_unmask_irq(intc_irq);
|
|
+ __dmac_channel_enable_irq(irq - IRQ_DMA_0);
|
|
+}
|
|
+
|
|
+static void disable_dma_irq(unsigned int irq)
|
|
+{
|
|
+ __dmac_channel_disable_irq(irq - IRQ_DMA_0);
|
|
+}
|
|
+
|
|
+static void mask_and_ack_dma_irq(unsigned int irq)
|
|
+{
|
|
+ unsigned int intc_irq;
|
|
+
|
|
+ if ( irq < (IRQ_DMA_0 + HALF_DMA_NUM) ) /* DMAC Group 0 irq */
|
|
+ intc_irq = IRQ_DMAC0;
|
|
+ else if ( irq < (IRQ_DMA_0 + MAX_DMA_NUM) ) /* DMAC Group 1 irq */
|
|
+ intc_irq = IRQ_DMAC1;
|
|
+ else {
|
|
+ printk("%s, unexpected dma irq #%d\n", __FILE__, irq);
|
|
+ return ;
|
|
+ }
|
|
+ __intc_ack_irq(intc_irq);
|
|
+ __dmac_channel_ack_irq(irq-IRQ_DMA_0); /* needed?? add 20080506, Wolfgang */
|
|
+ __dmac_channel_disable_irq(irq - IRQ_DMA_0);
|
|
+}
|
|
+
|
|
+static void end_dma_irq(unsigned int irq)
|
|
+{
|
|
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
|
|
+ enable_dma_irq(irq);
|
|
+ }
|
|
+}
|
|
+
|
|
+static unsigned int startup_dma_irq(unsigned int irq)
|
|
+{
|
|
+ enable_dma_irq(irq);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void shutdown_dma_irq(unsigned int irq)
|
|
+{
|
|
+ disable_dma_irq(irq);
|
|
+}
|
|
+
|
|
+static struct irq_chip dma_irq_type = {
|
|
+ .typename = "DMA",
|
|
+ .startup = startup_dma_irq,
|
|
+ .shutdown = shutdown_dma_irq,
|
|
+ .enable = enable_dma_irq,
|
|
+ .disable = disable_dma_irq,
|
|
+ .ack = mask_and_ack_dma_irq,
|
|
+ .end = end_dma_irq,
|
|
+};
|
|
+
|
|
+//----------------------------------------------------------------------
|
|
+
|
|
+void __init arch_init_irq(void)
|
|
+{
|
|
+ int i;
|
|
+
|
|
+ clear_c0_status(0xff04); /* clear ERL */
|
|
+ set_c0_status(0x0400); /* set IP2 */
|
|
+
|
|
+ /* Set up INTC irq
|
|
+ */
|
|
+ for (i = 0; i < 32; i++) {
|
|
+ disable_intc_irq(i);
|
|
+ irq_desc[i].chip = &intc_irq_type;
|
|
+ }
|
|
+
|
|
+ /* Set up DMAC irq
|
|
+ */
|
|
+ for (i = 0; i < NUM_DMA; i++) {
|
|
+ disable_dma_irq(IRQ_DMA_0 + i);
|
|
+ irq_desc[IRQ_DMA_0 + i].chip = &dma_irq_type;
|
|
+ }
|
|
+
|
|
+ /* Set up GPIO irq
|
|
+ */
|
|
+ for (i = 0; i < NUM_GPIO; i++) {
|
|
+ disable_gpio_irq(IRQ_GPIO_0 + i);
|
|
+ irq_desc[IRQ_GPIO_0 + i].chip = &gpio_irq_type;
|
|
+ }
|
|
+}
|
|
+
|
|
+static int plat_real_irq(int irq)
|
|
+{
|
|
+ switch (irq) {
|
|
+ case IRQ_GPIO0:
|
|
+ irq = __gpio_group_irq(0) + IRQ_GPIO_0;
|
|
+ break;
|
|
+ case IRQ_GPIO1:
|
|
+ irq = __gpio_group_irq(1) + IRQ_GPIO_0 + 32;
|
|
+ break;
|
|
+ case IRQ_GPIO2:
|
|
+ irq = __gpio_group_irq(2) + IRQ_GPIO_0 + 64;
|
|
+ break;
|
|
+ case IRQ_GPIO3:
|
|
+ irq = __gpio_group_irq(3) + IRQ_GPIO_0 + 96;
|
|
+ break;
|
|
+ case IRQ_GPIO4:
|
|
+ irq = __gpio_group_irq(4) + IRQ_GPIO_0 + 128;
|
|
+ break;
|
|
+ case IRQ_GPIO5:
|
|
+ irq = __gpio_group_irq(5) + IRQ_GPIO_0 + 160;
|
|
+ break;
|
|
+ case IRQ_DMAC0:
|
|
+ case IRQ_DMAC1:
|
|
+ irq = __dmac_get_irq() + IRQ_DMA_0;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ return irq;
|
|
+}
|
|
+
|
|
+asmlinkage void plat_irq_dispatch(void)
|
|
+{
|
|
+ int irq = 0;
|
|
+ static unsigned long intc_ipr = 0;
|
|
+
|
|
+ intc_ipr |= REG_INTC_IPR;
|
|
+
|
|
+ if (!intc_ipr) return;
|
|
+
|
|
+ irq = ffs(intc_ipr) - 1;
|
|
+ intc_ipr &= ~(1<<irq);
|
|
+
|
|
+ irq = plat_real_irq(irq);
|
|
+ do_IRQ(irq);
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750d/platform.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750d/platform.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,141 @@
|
|
+/*
|
|
+ * Platform device support for Jz4740 SoC.
|
|
+ *
|
|
+ * Copyright 2007, <yliu@ingenic.cn>
|
|
+ *
|
|
+ * This file is licensed under the terms of the GNU General Public
|
|
+ * License version 2. This program is licensed "as is" without any
|
|
+ * warranty of any kind, whether express or implied.
|
|
+ */
|
|
+
|
|
+#include <linux/device.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/resource.h>
|
|
+
|
|
+#include <asm/jzsoc.h>
|
|
+#if 0
|
|
+/* OHCI (USB full speed host controller) */
|
|
+static struct resource jz_usb_ohci_resources[] = {
|
|
+ [0] = {
|
|
+ .start = CPHYSADDR(UHC_BASE), // phys addr for ioremap
|
|
+ .end = CPHYSADDR(UHC_BASE) + 0x10000 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = IRQ_UHC,
|
|
+ .end = IRQ_UHC,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+/* The dmamask must be set for OHCI to work */
|
|
+static u64 ohci_dmamask = ~(u32)0;
|
|
+
|
|
+static struct platform_device jz_usb_ohci_device = {
|
|
+ .name = "jz-ohci",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &ohci_dmamask,
|
|
+ .coherent_dma_mask = 0xffffffff,
|
|
+ },
|
|
+ .num_resources = ARRAY_SIZE(jz_usb_ohci_resources),
|
|
+ .resource = jz_usb_ohci_resources,
|
|
+};
|
|
+#endif
|
|
+/*** LCD controller ***/
|
|
+static struct resource jz_lcd_resources[] = {
|
|
+ [0] = {
|
|
+ .start = CPHYSADDR(LCD_BASE),
|
|
+ .end = CPHYSADDR(LCD_BASE) + 0x10000 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = IRQ_LCD,
|
|
+ .end = IRQ_LCD,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ }
|
|
+};
|
|
+
|
|
+static u64 jz_lcd_dmamask = ~(u32)0;
|
|
+
|
|
+static struct platform_device jz_lcd_device = {
|
|
+ .name = "jz-lcd",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &jz_lcd_dmamask,
|
|
+ .coherent_dma_mask = 0xffffffff,
|
|
+ },
|
|
+ .num_resources = ARRAY_SIZE(jz_lcd_resources),
|
|
+ .resource = jz_lcd_resources,
|
|
+};
|
|
+
|
|
+/* UDC (USB gadget controller) */
|
|
+static struct resource jz_usb_gdt_resources[] = {
|
|
+ [0] = {
|
|
+ .start = CPHYSADDR(UDC_BASE),
|
|
+ .end = CPHYSADDR(UDC_BASE) + 0x10000 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = IRQ_UDC,
|
|
+ .end = IRQ_UDC,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static u64 udc_dmamask = ~(u32)0;
|
|
+
|
|
+static struct platform_device jz_usb_gdt_device = {
|
|
+ .name = "jz-udc",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &udc_dmamask,
|
|
+ .coherent_dma_mask = 0xffffffff,
|
|
+ },
|
|
+ .num_resources = ARRAY_SIZE(jz_usb_gdt_resources),
|
|
+ .resource = jz_usb_gdt_resources,
|
|
+};
|
|
+
|
|
+/** MMC/SD controller **/
|
|
+static struct resource jz_mmc_resources[] = {
|
|
+ [0] = {
|
|
+ .start = CPHYSADDR(MSC_BASE),
|
|
+ .end = CPHYSADDR(MSC_BASE) + 0x10000 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = IRQ_MSC0,
|
|
+ .end = IRQ_MSC0,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ }
|
|
+};
|
|
+
|
|
+static u64 jz_mmc_dmamask = ~(u32)0;
|
|
+
|
|
+static struct platform_device jz_mmc_device = {
|
|
+ .name = "jz-mmc",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &jz_mmc_dmamask,
|
|
+ .coherent_dma_mask = 0xffffffff,
|
|
+ },
|
|
+ .num_resources = ARRAY_SIZE(jz_mmc_resources),
|
|
+ .resource = jz_mmc_resources,
|
|
+};
|
|
+
|
|
+/* All */
|
|
+static struct platform_device *jz_platform_devices[] __initdata = {
|
|
+// &jz_usb_ohci_device,
|
|
+ &jz_lcd_device,
|
|
+ &jz_usb_gdt_device,
|
|
+ &jz_mmc_device,
|
|
+};
|
|
+
|
|
+static int __init jz_platform_init(void)
|
|
+{
|
|
+ return platform_add_devices(jz_platform_devices, ARRAY_SIZE(jz_platform_devices));
|
|
+}
|
|
+
|
|
+arch_initcall(jz_platform_init);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750d/pm.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750d/pm.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,461 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4750d/common/pm.c
|
|
+ *
|
|
+ * JZ4750D Power Management Routines
|
|
+ *
|
|
+ * Copyright (C) 2006 Ingenic Semiconductor Inc.
|
|
+ * Author: <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can distribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License (Version 2) as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ * This program is distributed in the hope it will be useful, but WITHOUT
|
|
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
+ * for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License along
|
|
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
|
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/pm.h>
|
|
+#include <linux/pm_legacy.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/proc_fs.h>
|
|
+#include <linux/sysctl.h>
|
|
+
|
|
+#include <asm/cacheops.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+#undef DEBUG
|
|
+//#define DEBUG
|
|
+#ifdef DEBUG
|
|
+#define dprintk(x...) printk(x)
|
|
+#else
|
|
+#define dprintk(x...)
|
|
+#endif
|
|
+
|
|
+#define GPIO_PORT_NUM 6
|
|
+
|
|
+/*
|
|
+ * __gpio_as_sleep set all pins to pull-disable, and set all pins as input
|
|
+ * except sdram and the pins which can be used as CS1_N to CS4_N for chip select.
|
|
+ */
|
|
+#define __gpio_as_sleep() \
|
|
+do { \
|
|
+ REG_GPIO_PXFUNC(1) = ~0x03ff7fff; \
|
|
+ REG_GPIO_PXSELC(1) = ~0x03ff7fff; \
|
|
+ REG_GPIO_PXDIRC(1) = ~0x03ff7fff; \
|
|
+ REG_GPIO_PXPES(1) = 0xffffffff; \
|
|
+ REG_GPIO_PXFUNC(2) = ~0x01e00000; \
|
|
+ REG_GPIO_PXSELC(2) = ~0x01e00000; \
|
|
+ REG_GPIO_PXDIRC(2) = ~0x01e00000; \
|
|
+ REG_GPIO_PXPES(2) = 0xffffffff; \
|
|
+ REG_GPIO_PXFUNC(3) = 0xffffffff; \
|
|
+ REG_GPIO_PXSELC(3) = 0xffffffff; \
|
|
+ REG_GPIO_PXDIRC(3) = 0xffffffff; \
|
|
+ REG_GPIO_PXPES(3) = 0xffffffff; \
|
|
+ REG_GPIO_PXFUNC(4) = 0xffffffff; \
|
|
+ REG_GPIO_PXSELC(4) = 0xffffffff; \
|
|
+ REG_GPIO_PXDIRC(4) = 0xffffffff; \
|
|
+ REG_GPIO_PXPES(4) = 0xffffffff; \
|
|
+ REG_GPIO_PXFUNC(5) = 0xffffffff; \
|
|
+ REG_GPIO_PXSELC(5) = 0xffffffff; \
|
|
+ REG_GPIO_PXDIRC(5) = 0xffffffff; \
|
|
+ REG_GPIO_PXPES(5) = 0xffffffff; \
|
|
+} while (0)
|
|
+
|
|
+static int jz_pm_do_hibernate(void)
|
|
+{
|
|
+ printk("Put CPU into hibernate mode.\n");
|
|
+
|
|
+ /* Mask all interrupts */
|
|
+ REG_INTC_IMSR = 0xffffffff;
|
|
+
|
|
+ /*
|
|
+ * RTC Wakeup or 1Hz interrupt can be enabled or disabled
|
|
+ * through RTC driver's ioctl (linux/driver/char/rtc_jz.c).
|
|
+ */
|
|
+
|
|
+ /* Set minimum wakeup_n pin low-level assertion time for wakeup: 100ms */
|
|
+ while (!(REG_RTC_RCR & RTC_RCR_WRDY));
|
|
+ REG_RTC_HWFCR = (100 << RTC_HWFCR_BIT);
|
|
+
|
|
+ /* Set reset pin low-level assertion time after wakeup: must > 60ms */
|
|
+ while (!(REG_RTC_RCR & RTC_RCR_WRDY));
|
|
+ REG_RTC_HRCR = (60 << RTC_HRCR_BIT); /* 60 ms */
|
|
+
|
|
+ /* Scratch pad register to be reserved */
|
|
+ while (!(REG_RTC_RCR & RTC_RCR_WRDY));
|
|
+ REG_RTC_HSPR = 0x12345678;
|
|
+
|
|
+ /* clear wakeup status register */
|
|
+ while (!(REG_RTC_RCR & RTC_RCR_WRDY));
|
|
+ REG_RTC_HWRSR = 0x0;
|
|
+
|
|
+ /* Put CPU to power down mode */
|
|
+ while (!(REG_RTC_RCR & RTC_RCR_WRDY));
|
|
+ REG_RTC_HCR = RTC_HCR_PD;
|
|
+
|
|
+ while (!(REG_RTC_RCR & RTC_RCR_WRDY));
|
|
+ while(1);
|
|
+
|
|
+ /* We can't get here */
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/* NOTES:
|
|
+ * 1: Pins that are floated (NC) should be set as input and pull-enable.
|
|
+ * 2: Pins that are pull-up or pull-down by outside should be set as input
|
|
+ * and pull-disable.
|
|
+ * 3: Pins that are connected to a chip except sdram and nand flash
|
|
+ * should be set as input and pull-disable, too.
|
|
+ */
|
|
+static void jz_board_do_sleep(unsigned long *ptr)
|
|
+{
|
|
+ unsigned char i;
|
|
+
|
|
+ /* Print messages of GPIO registers for debug */
|
|
+ for(i=0;i<GPIO_PORT_NUM;i++) {
|
|
+ dprintk("run dat:%x pin:%x fun:%x sel:%x dir:%x pull:%x msk:%x trg:%x\n", \
|
|
+ REG_GPIO_PXDAT(i),REG_GPIO_PXPIN(i),REG_GPIO_PXFUN(i),REG_GPIO_PXSEL(i), \
|
|
+ REG_GPIO_PXDIR(i),REG_GPIO_PXPE(i),REG_GPIO_PXIM(i),REG_GPIO_PXTRG(i));
|
|
+ }
|
|
+
|
|
+ /* Save GPIO registers */
|
|
+ for(i = 1; i < GPIO_PORT_NUM; i++) {
|
|
+ *ptr++ = REG_GPIO_PXFUN(i);
|
|
+ *ptr++ = REG_GPIO_PXSEL(i);
|
|
+ *ptr++ = REG_GPIO_PXDIR(i);
|
|
+ *ptr++ = REG_GPIO_PXPE(i);
|
|
+ *ptr++ = REG_GPIO_PXIM(i);
|
|
+ *ptr++ = REG_GPIO_PXDAT(i);
|
|
+ *ptr++ = REG_GPIO_PXTRG(i);
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * Set all pins to pull-disable, and set all pins as input except
|
|
+ * sdram and the pins which can be used as CS1_N to CS4_N for chip select.
|
|
+ */
|
|
+ __gpio_as_sleep();
|
|
+
|
|
+ /*
|
|
+ * Set proper status for GPC21 to GPC24 which can be used as CS1_N to CS4_N.
|
|
+ * Keep the pins' function used for chip select(CS) here according to your
|
|
+ * system to avoid chip select crashing with sdram when resuming from sleep mode.
|
|
+ */
|
|
+
|
|
+#if defined(CONFIG_JZ4750D_APUS)
|
|
+ /* GPB25/CS1_N is used as chip select for nand flash, shouldn't be change. */
|
|
+
|
|
+ /* GPB26/CS2_N is connected to nand flash, needn't be changed. */
|
|
+
|
|
+ /* GPB28/CS3_N is used as cs8900's chip select, shouldn't be changed. */
|
|
+
|
|
+ /* GPB27/CS4_N is used as NOR's chip select, shouldn't be changed. */
|
|
+#endif
|
|
+
|
|
+ /*
|
|
+ * Enable pull for NC pins here according to your system
|
|
+ */
|
|
+
|
|
+#if defined(CONFIG_JZ4750D_APUS)
|
|
+#endif
|
|
+
|
|
+ /*
|
|
+ * If you must set some GPIOs as output to high level or low level,
|
|
+ * you can set them here, using:
|
|
+ * __gpio_as_output(n);
|
|
+ * __gpio_set_pin(n); or __gpio_clear_pin(n);
|
|
+ */
|
|
+
|
|
+#if defined(CONFIG_JZ4750D_APUS)
|
|
+ /* GPC7 which is used as AMPEN_N should be set to high to disable audio amplifier */
|
|
+ __gpio_as_output(32*2+7);
|
|
+ __gpio_set_pin(32*2+7);
|
|
+#endif
|
|
+
|
|
+#ifdef DEBUG
|
|
+ /* Keep uart function for printing debug message */
|
|
+ __gpio_as_uart0();
|
|
+ __gpio_as_uart1();
|
|
+ __gpio_as_uart2();
|
|
+ __gpio_as_uart3();
|
|
+
|
|
+ /* Print messages of GPIO registers for debug */
|
|
+ for(i=0;i<GPIO_PORT_NUM;i++) {
|
|
+ dprintk("sleep dat:%x pin:%x fun:%x sel:%x dir:%x pull:%x msk:%x trg:%x\n", \
|
|
+ REG_GPIO_PXDAT(i),REG_GPIO_PXPIN(i),REG_GPIO_PXFUN(i),REG_GPIO_PXSEL(i), \
|
|
+ REG_GPIO_PXDIR(i),REG_GPIO_PXPE(i),REG_GPIO_PXIM(i),REG_GPIO_PXTRG(i));
|
|
+ }
|
|
+#endif
|
|
+}
|
|
+
|
|
+static void jz_board_do_resume(unsigned long *ptr)
|
|
+{
|
|
+ unsigned char i;
|
|
+
|
|
+ /* Restore GPIO registers */
|
|
+ for(i = 1; i < GPIO_PORT_NUM; i++) {
|
|
+ REG_GPIO_PXFUNS(i) = *ptr;
|
|
+ REG_GPIO_PXFUNC(i) = ~(*ptr++);
|
|
+
|
|
+ REG_GPIO_PXSELS(i) = *ptr;
|
|
+ REG_GPIO_PXSELC(i) = ~(*ptr++);
|
|
+
|
|
+ REG_GPIO_PXDIRS(i) = *ptr;
|
|
+ REG_GPIO_PXDIRC(i) = ~(*ptr++);
|
|
+
|
|
+ REG_GPIO_PXPES(i) = *ptr;
|
|
+ REG_GPIO_PXPEC(i) = ~(*ptr++);
|
|
+
|
|
+ REG_GPIO_PXIMS(i)=*ptr;
|
|
+ REG_GPIO_PXIMC(i)=~(*ptr++);
|
|
+
|
|
+ REG_GPIO_PXDATS(i)=*ptr;
|
|
+ REG_GPIO_PXDATC(i)=~(*ptr++);
|
|
+
|
|
+ REG_GPIO_PXTRGS(i)=*ptr;
|
|
+ REG_GPIO_PXTRGC(i)=~(*ptr++);
|
|
+ }
|
|
+
|
|
+ /* Print messages of GPIO registers for debug */
|
|
+ for(i=0;i<GPIO_PORT_NUM;i++) {
|
|
+ dprintk("resume dat:%x pin:%x fun:%x sel:%x dir:%x pull:%x msk:%x trg:%x\n", \
|
|
+ REG_GPIO_PXDAT(i),REG_GPIO_PXPIN(i),REG_GPIO_PXFUN(i),REG_GPIO_PXSEL(i), \
|
|
+ REG_GPIO_PXDIR(i),REG_GPIO_PXPE(i),REG_GPIO_PXIM(i),REG_GPIO_PXTRG(i));
|
|
+ }
|
|
+}
|
|
+
|
|
+
|
|
+
|
|
+static int jz_pm_do_sleep(void)
|
|
+{
|
|
+ unsigned long delta;
|
|
+ unsigned long nfcsr = REG_EMC_NFCSR;
|
|
+ unsigned long opcr = REG_CPM_OPCR;
|
|
+ unsigned long imr = REG_INTC_IMR;
|
|
+ unsigned long sadc = REG_SADC_ENA;
|
|
+ unsigned long sleep_gpio_save[7*(GPIO_PORT_NUM-1)];
|
|
+
|
|
+ printk("Put CPU into sleep mode.\n");
|
|
+
|
|
+ /* Preserve current time */
|
|
+ delta = xtime.tv_sec - REG_RTC_RSR;
|
|
+
|
|
+ /* Disable nand flash */
|
|
+ REG_EMC_NFCSR = ~0xff;
|
|
+
|
|
+ /* stop sadc */
|
|
+ REG_SADC_ENA &= ~0x7;
|
|
+ while((REG_SADC_ENA & 0x7) != 0);
|
|
+ udelay(100);
|
|
+
|
|
+ /*stop udc and usb*/
|
|
+ __cpm_suspend_uhcphy();
|
|
+ __cpm_suspend_udcphy();
|
|
+
|
|
+ /* Sleep on-board modules */
|
|
+ jz_board_do_sleep(sleep_gpio_save);
|
|
+
|
|
+ /* Mask all interrupts */
|
|
+ REG_INTC_IMSR = 0xffffffff;
|
|
+
|
|
+ /* Just allow following interrupts to wakeup the system.
|
|
+ * Note: modify this according to your system.
|
|
+ */
|
|
+
|
|
+ /* enable RTC alarm */
|
|
+ __intc_unmask_irq(IRQ_RTC);
|
|
+#if 0
|
|
+ /* make system wake up after n seconds by RTC alarm */
|
|
+ unsigned int v, n;
|
|
+ n = 10;
|
|
+ while (!__rtc_write_ready());
|
|
+ __rtc_enable_alarm();
|
|
+ while (!__rtc_write_ready());
|
|
+ __rtc_enable_alarm_irq();
|
|
+ while (!__rtc_write_ready());
|
|
+ v = __rtc_get_second();
|
|
+ while (!__rtc_write_ready());
|
|
+ __rtc_set_alarm_second(v+n);
|
|
+#endif
|
|
+
|
|
+ /* WAKEUP key */
|
|
+ __gpio_as_irq_rise_edge(GPIO_WAKEUP);
|
|
+ __gpio_unmask_irq(GPIO_WAKEUP);
|
|
+ __intc_unmask_irq(IRQ_GPIO0 - (GPIO_WAKEUP/32)); /* unmask IRQ_GPIOn depends on GPIO_WAKEUP */
|
|
+
|
|
+ /* disable externel clock Oscillator in sleep mode */
|
|
+ __cpm_disable_osc_in_sleep();
|
|
+ /* select 32K crystal as RTC clock in sleep mode */
|
|
+ __cpm_select_rtcclk_rtc();
|
|
+
|
|
+ /* Enter SLEEP mode */
|
|
+ REG_CPM_LCR &= ~CPM_LCR_LPM_MASK;
|
|
+ REG_CPM_LCR |= CPM_LCR_LPM_SLEEP;
|
|
+ __asm__(".set\tmips3\n\t"
|
|
+ "wait\n\t"
|
|
+ ".set\tmips0");
|
|
+
|
|
+ /* Restore to IDLE mode */
|
|
+ REG_CPM_LCR &= ~CPM_LCR_LPM_MASK;
|
|
+ REG_CPM_LCR |= CPM_LCR_LPM_IDLE;
|
|
+
|
|
+ /* Restore nand flash control register */
|
|
+ REG_EMC_NFCSR = nfcsr;
|
|
+
|
|
+ /* Restore interrupts */
|
|
+ REG_INTC_IMSR = imr;
|
|
+ REG_INTC_IMCR = ~imr;
|
|
+
|
|
+ /* Restore sadc */
|
|
+ REG_SADC_ENA = sadc;
|
|
+
|
|
+ /* Resume on-board modules */
|
|
+ jz_board_do_resume(sleep_gpio_save);
|
|
+
|
|
+ /* Restore Oscillator and Power Control Register */
|
|
+ REG_CPM_OPCR = opcr;
|
|
+
|
|
+ /* Restore current time */
|
|
+ xtime.tv_sec = REG_RTC_RSR + delta;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/* Put CPU to HIBERNATE mode */
|
|
+int jz_pm_hibernate(void)
|
|
+{
|
|
+ return jz_pm_do_hibernate();
|
|
+}
|
|
+
|
|
+#ifndef CONFIG_JZ_POWEROFF
|
|
+static irqreturn_t pm_irq_handler (int irq, void *dev_id)
|
|
+{
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+#endif
|
|
+
|
|
+/* Put CPU to SLEEP mode */
|
|
+int jz_pm_sleep(void)
|
|
+{
|
|
+ int retval;
|
|
+
|
|
+#ifndef CONFIG_JZ_POWEROFF
|
|
+ if ((retval = request_irq (IRQ_GPIO_0 + GPIO_WAKEUP, pm_irq_handler, IRQF_DISABLED,
|
|
+ "PM", NULL))) {
|
|
+ printk ("PM could not get IRQ for GPIO_WAKEUP\n");
|
|
+ return retval;
|
|
+ }
|
|
+#endif
|
|
+
|
|
+ pm_send_all(PM_SUSPEND, (void *)3);
|
|
+ retval = jz_pm_do_sleep();
|
|
+ pm_send_all(PM_RESUME, (void *)0);
|
|
+
|
|
+#ifndef CONFIG_JZ_POWEROFF
|
|
+ free_irq (IRQ_GPIO_0 + GPIO_WAKEUP, NULL);
|
|
+#endif
|
|
+
|
|
+ return retval;
|
|
+}
|
|
+
|
|
+#if 0
|
|
+/* Deprecated ,was used by dpm */
|
|
+void jz_pm_idle(void)
|
|
+{
|
|
+ local_irq_disable();
|
|
+ if (!need_resched()) {
|
|
+ local_irq_enable();
|
|
+ cpu_wait();
|
|
+ }
|
|
+}
|
|
+#endif
|
|
+
|
|
+
|
|
+#ifdef CONFIG_SYSCTL
|
|
+
|
|
+/*
|
|
+ * Use a temporary sysctl number. Horrid, but will be cleaned up in 2.6
|
|
+ * when all the PM interfaces exist nicely.
|
|
+ */
|
|
+#define CTL_PM_SUSPEND 1
|
|
+#define CTL_PM_HIBERNATE 2
|
|
+
|
|
+/*----------------------------------------------------------------------------
|
|
+ * Power Management sleep sysctl proc interface
|
|
+ *
|
|
+ * A write to /proc/sys/pm/suspend invokes this function
|
|
+ * which initiates a sleep.
|
|
+ *--------------------------------------------------------------------------*/
|
|
+static int sysctl_jz_pm_sleep(void)
|
|
+{
|
|
+ return jz_pm_sleep();
|
|
+}
|
|
+
|
|
+/*----------------------------------------------------------------------------
|
|
+ * Power Management sleep sysctl proc interface
|
|
+ *
|
|
+ * A write to /proc/sys/pm/hibernate invokes this function
|
|
+ * which initiates a poweroff.
|
|
+ *--------------------------------------------------------------------------*/
|
|
+static int sysctl_jz_pm_hibernate(void)
|
|
+{
|
|
+ return jz_pm_hibernate();
|
|
+}
|
|
+
|
|
+static struct ctl_table pm_table[] =
|
|
+{
|
|
+ {
|
|
+ .ctl_name = CTL_UNNUMBERED,
|
|
+ .procname = "suspend",
|
|
+ .data = NULL,
|
|
+ .maxlen = 0,
|
|
+ .mode = 0600,
|
|
+ .proc_handler = &sysctl_jz_pm_sleep,
|
|
+ },
|
|
+ {
|
|
+ .ctl_name = CTL_UNNUMBERED,
|
|
+ .procname = "hibernate",
|
|
+ .data = NULL,
|
|
+ .maxlen = 0,
|
|
+ .mode = 0600,
|
|
+ .proc_handler = &sysctl_jz_pm_hibernate,
|
|
+ },
|
|
+ { .ctl_name = 0}
|
|
+};
|
|
+
|
|
+static struct ctl_table pm_dir_table[] =
|
|
+{
|
|
+ {
|
|
+ .ctl_name = CTL_UNNUMBERED,
|
|
+ .procname = "pm",
|
|
+ .mode = 0555,
|
|
+ .child = pm_table,
|
|
+ },
|
|
+ { .ctl_name = 0}
|
|
+};
|
|
+
|
|
+#endif /* CONFIG_SYSCTL */
|
|
+
|
|
+/*
|
|
+ * Initialize power interface
|
|
+ */
|
|
+static int __init jz_pm_init(void)
|
|
+{
|
|
+ printk("Power Management for JZ\n");
|
|
+
|
|
+#ifdef CONFIG_SYSCTL
|
|
+ register_sysctl_table(pm_dir_table);
|
|
+#endif
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+module_init(jz_pm_init);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750d/proc.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750d/proc.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,877 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4750d/proc.c
|
|
+ *
|
|
+ * /proc/jz/ procfs for jz4750d on-chip modules.
|
|
+ *
|
|
+ * Copyright (C) 2006 Ingenic Semiconductor Inc.
|
|
+ * Author: <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can distribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License (Version 2) as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ * This program is distributed in the hope it will be useful, but WITHOUT
|
|
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
+ * for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License along
|
|
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
|
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
|
|
+ *
|
|
+ */
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/irq.h>
|
|
+#include <linux/sysctl.h>
|
|
+#include <linux/proc_fs.h>
|
|
+#include <linux/page-flags.h>
|
|
+#include <asm/uaccess.h>
|
|
+#include <asm/pgtable.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+//#define DEBUG 1
|
|
+#undef DEBUG
|
|
+
|
|
+
|
|
+struct proc_dir_entry *proc_jz_root;
|
|
+
|
|
+
|
|
+/*
|
|
+ * EMC Modules
|
|
+ */
|
|
+static int emc_read_proc (char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+
|
|
+ len += sprintf (page+len, "SMCR(0-5): 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", REG_EMC_SMCR0, REG_EMC_SMCR1, REG_EMC_SMCR2, REG_EMC_SMCR3, REG_EMC_SMCR4);
|
|
+ len += sprintf (page+len, "SACR(0-5): 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", REG_EMC_SACR0, REG_EMC_SACR1, REG_EMC_SACR2, REG_EMC_SACR3, REG_EMC_SACR4);
|
|
+ len += sprintf (page+len, "DMCR: 0x%08x\n", REG_EMC_DMCR);
|
|
+ len += sprintf (page+len, "RTCSR: 0x%04x\n", REG_EMC_RTCSR);
|
|
+ len += sprintf (page+len, "RTCOR: 0x%04x\n", REG_EMC_RTCOR);
|
|
+ return len;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Power Manager Module
|
|
+ */
|
|
+static int pmc_read_proc (char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+ unsigned long lcr = REG_CPM_LCR;
|
|
+ unsigned long clkgr = REG_CPM_CLKGR;
|
|
+
|
|
+ len += sprintf (page+len, "Low Power Mode : %s\n",
|
|
+ ((lcr & CPM_LCR_LPM_MASK) == (CPM_LCR_LPM_IDLE)) ?
|
|
+ "IDLE" : (((lcr & CPM_LCR_LPM_MASK) == (CPM_LCR_LPM_SLEEP)) ?
|
|
+ "SLEEP" : "HIBERNATE"));
|
|
+ len += sprintf (page+len, "Doze Mode : %s\n",
|
|
+ (lcr & CPM_LCR_DOZE_ON) ? "on" : "off");
|
|
+ if (lcr & CPM_LCR_DOZE_ON)
|
|
+ len += sprintf (page+len, " duty : %d\n", (int)((lcr & CPM_LCR_DOZE_DUTY_MASK) >> CPM_LCR_DOZE_DUTY_BIT));
|
|
+ len += sprintf (page+len, "IPU : %s\n",
|
|
+ (clkgr & CPM_CLKGR_IPU) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "DMAC : %s\n",
|
|
+ (clkgr & CPM_CLKGR_DMAC) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "UHC : %s\n",
|
|
+ (clkgr & CPM_CLKGR_UHC) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "UDC : %s\n",
|
|
+ (clkgr & CPM_CLKGR_UDC) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "LCD : %s\n",
|
|
+ (clkgr & CPM_CLKGR_LCD) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "CIM : %s\n",
|
|
+ (clkgr & CPM_CLKGR_CIM) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "SADC : %s\n",
|
|
+ (clkgr & CPM_CLKGR_SADC) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "MSC0 : %s\n",
|
|
+ (clkgr & CPM_CLKGR_MSC0) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "MSC1 : %s\n",
|
|
+ (clkgr & CPM_CLKGR_MSC1) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "AIC1 : %s\n",
|
|
+ (clkgr & CPM_CLKGR_AIC1) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "AIC2 : %s\n",
|
|
+ (clkgr & CPM_CLKGR_AIC2) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "SSI0 : %s\n",
|
|
+ (clkgr & CPM_CLKGR_SSI0) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "SSI1 : %s\n",
|
|
+ (clkgr & CPM_CLKGR_SSI1) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "I2C : %s\n",
|
|
+ (clkgr & CPM_CLKGR_I2C) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "RTC : %s\n",
|
|
+ (clkgr & CPM_CLKGR_RTC) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "TCU : %s\n",
|
|
+ (clkgr & CPM_CLKGR_TCU) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "UART1 : %s\n",
|
|
+ (clkgr & CPM_CLKGR_UART1) ? "stopped" : "running");
|
|
+ len += sprintf (page+len, "UART0 : %s\n",
|
|
+ (clkgr & CPM_CLKGR_UART0) ? "stopped" : "running");
|
|
+ return len;
|
|
+}
|
|
+
|
|
+static int pmc_write_proc(struct file *file, const char *buffer, unsigned long count, void *data)
|
|
+{
|
|
+ REG_CPM_CLKGR = simple_strtoul(buffer, 0, 16);
|
|
+ return count;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Clock Generation Module
|
|
+ */
|
|
+#define TO_MHZ(x) (x/1000000),(x%1000000)/10000
|
|
+#define TO_KHZ(x) (x/1000),(x%1000)/10
|
|
+
|
|
+static int cgm_read_proc (char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+ unsigned int cppcr = REG_CPM_CPPCR; /* PLL Control Register */
|
|
+ unsigned int cpccr = REG_CPM_CPCCR; /* Clock Control Register */
|
|
+ unsigned int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
|
|
+ unsigned int od[4] = {1, 2, 2, 4};
|
|
+
|
|
+ len += sprintf (page+len, "CPPCR : 0x%08x\n", cppcr);
|
|
+ len += sprintf (page+len, "CPCCR : 0x%08x\n", cpccr);
|
|
+ len += sprintf (page+len, "PLL : %s\n",
|
|
+ (cppcr & CPM_CPPCR_PLLEN) ? "ON" : "OFF");
|
|
+ len += sprintf (page+len, "m:n:o : %d:%d:%d\n",
|
|
+ __cpm_get_pllm() + 2,
|
|
+ __cpm_get_plln() + 2,
|
|
+ od[__cpm_get_pllod()]
|
|
+ );
|
|
+ len += sprintf (page+len, "C:H:M:P : %d:%d:%d:%d\n",
|
|
+ div[__cpm_get_cdiv()],
|
|
+ div[__cpm_get_hdiv()],
|
|
+ div[__cpm_get_mdiv()],
|
|
+ div[__cpm_get_pdiv()]
|
|
+ );
|
|
+ len += sprintf (page+len, "PLL Freq : %3d.%02d MHz\n", TO_MHZ(__cpm_get_pllout()));
|
|
+ len += sprintf (page+len, "CCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_cclk()));
|
|
+ len += sprintf (page+len, "HCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_hclk()));
|
|
+ len += sprintf (page+len, "MCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_mclk()));
|
|
+ len += sprintf (page+len, "PCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_pclk()));
|
|
+ len += sprintf (page+len, "LCDCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_lcdclk()));
|
|
+ len += sprintf (page+len, "PIXCLK : %3d.%02d KHz\n", TO_KHZ(__cpm_get_pixclk()));
|
|
+ len += sprintf (page+len, "I2SCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_i2sclk()));
|
|
+ len += sprintf (page+len, "USBCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_usbclk()));
|
|
+ len += sprintf (page+len, "MSC0CLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_mscclk(0)));
|
|
+ len += sprintf (page+len, "MSC1CLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_mscclk(1)));
|
|
+ len += sprintf (page+len, "EXTALCLK0 : %3d.%02d MHz\n", TO_MHZ(__cpm_get_extalclk0()));
|
|
+ len += sprintf (page+len, "EXTALCLK(by CPM): %3d.%02d MHz\n", TO_MHZ(__cpm_get_extalclk()));
|
|
+ len += sprintf (page+len, "RTCCLK : %3d.%02d MHz\n", TO_MHZ(__cpm_get_rtcclk()));
|
|
+
|
|
+ return len;
|
|
+}
|
|
+
|
|
+static int cgm_write_proc(struct file *file, const char *buffer, unsigned long count, void *data)
|
|
+{
|
|
+ REG_CPM_CPCCR = simple_strtoul(buffer, 0, 16);
|
|
+ return count;
|
|
+}
|
|
+
|
|
+
|
|
+/* USAGE:
|
|
+ * echo n > /proc/jz/ipu // n = [1,...,9], alloc mem, 2^n pages.
|
|
+ * echo FF > /proc/jz/ipu // 255, free all buffer
|
|
+ * echo xxxx > /proc/jz/ipu // free buffer which addr is xxxx
|
|
+ * echo llll > /proc/jz/ipu // add_wired_entry(l,l,l,l)
|
|
+ * echo 0 > /proc/jz/ipu // debug, print ipu_buf
|
|
+ * od -X /proc/jz/ipu // read mem addr
|
|
+ */
|
|
+
|
|
+typedef struct _ipu_buf {
|
|
+ unsigned int addr; /* phys addr */
|
|
+ unsigned int page_shift;
|
|
+} ipu_buf_t;
|
|
+
|
|
+#define IPU_BUF_MAX 4 /* 4 buffers */
|
|
+
|
|
+static struct _ipu_buf ipu_buf[IPU_BUF_MAX];
|
|
+static int ipu_buf_cnt = 0;
|
|
+static unsigned char g_asid=0;
|
|
+
|
|
+extern void local_flush_tlb_all(void);
|
|
+
|
|
+/* CP0 hazard avoidance. */
|
|
+#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \
|
|
+ "nop; nop; nop; nop; nop; nop;\n\t" \
|
|
+ ".set reorder\n\t")
|
|
+void show_tlb(void)
|
|
+{
|
|
+#define ASID_MASK 0xFF
|
|
+
|
|
+ unsigned long flags;
|
|
+ unsigned int old_ctx;
|
|
+ unsigned int entry;
|
|
+ unsigned int entrylo0, entrylo1, entryhi;
|
|
+ unsigned int pagemask;
|
|
+
|
|
+ local_irq_save(flags);
|
|
+
|
|
+ /* Save old context */
|
|
+ old_ctx = (read_c0_entryhi() & 0xff);
|
|
+
|
|
+ printk("TLB content:\n");
|
|
+ entry = 0;
|
|
+ while(entry < 32) {
|
|
+ write_c0_index(entry);
|
|
+ BARRIER;
|
|
+ tlb_read();
|
|
+ BARRIER;
|
|
+ entryhi = read_c0_entryhi();
|
|
+ entrylo0 = read_c0_entrylo0();
|
|
+ entrylo1 = read_c0_entrylo1();
|
|
+ pagemask = read_c0_pagemask();
|
|
+ printk("%02d: ASID=%02d%s VA=0x%08x ", entry, entryhi & ASID_MASK, (entrylo0 & entrylo1 & 1) ? "(G)" : " ", entryhi & ~ASID_MASK);
|
|
+ printk("PA0=0x%08x C0=%x %s%s%s\n", (entrylo0>>6)<<12, (entrylo0>>3) & 7, (entrylo0 & 4) ? "Dirty " : "", (entrylo0 & 2) ? "Valid " : "Invalid ", (entrylo0 & 1) ? "Global" : "");
|
|
+ printk("\t\t\t PA1=0x%08x C1=%x %s%s%s\n", (entrylo1>>6)<<12, (entrylo1>>3) & 7, (entrylo1 & 4) ? "Dirty " : "", (entrylo1 & 2) ? "Valid " : "Invalid ", (entrylo1 & 1) ? "Global" : "");
|
|
+
|
|
+ printk("\t\tpagemask=0x%08x", pagemask);
|
|
+ printk("\tentryhi=0x%08x\n", entryhi);
|
|
+ printk("\t\tentrylo0=0x%08x", entrylo0);
|
|
+ printk("\tentrylo1=0x%08x\n", entrylo1);
|
|
+
|
|
+ entry++;
|
|
+ }
|
|
+ BARRIER;
|
|
+ write_c0_entryhi(old_ctx);
|
|
+
|
|
+ local_irq_restore(flags);
|
|
+}
|
|
+
|
|
+static void ipu_add_wired_entry(unsigned long pid,
|
|
+ unsigned long entrylo0, unsigned long entrylo1,
|
|
+ unsigned long entryhi, unsigned long pagemask)
|
|
+{
|
|
+ unsigned long flags;
|
|
+ unsigned long wired;
|
|
+ unsigned long old_pagemask;
|
|
+ unsigned long old_ctx;
|
|
+ struct task_struct *g, *p;
|
|
+
|
|
+ /* We will lock an 4MB page size entry to map the 4MB reserved IPU memory */
|
|
+ wired = read_c0_wired();
|
|
+ if (wired) return;
|
|
+
|
|
+ do_each_thread(g, p) {
|
|
+ if (p->pid == pid )
|
|
+ g_asid = p->mm->context[0];
|
|
+ } while_each_thread(g, p);
|
|
+
|
|
+
|
|
+ local_irq_save(flags);
|
|
+
|
|
+ entrylo0 = entrylo0 >> 6; /* PFN */
|
|
+ entrylo0 |= 0x6 | (0 << 3); /* Write-through cacheable, dirty, valid */
|
|
+
|
|
+ /* Save old context and create impossible VPN2 value */
|
|
+ old_ctx = read_c0_entryhi() & 0xff;
|
|
+ old_pagemask = read_c0_pagemask();
|
|
+ wired = read_c0_wired();
|
|
+ write_c0_wired(wired + 1);
|
|
+ write_c0_index(wired);
|
|
+ BARRIER;
|
|
+ entryhi &= ~0xff; /* new add, 20070906 */
|
|
+ entryhi |= g_asid; /* new add, 20070906 */
|
|
+// entryhi |= old_ctx; /* new add, 20070906 */
|
|
+ write_c0_pagemask(pagemask);
|
|
+ write_c0_entryhi(entryhi);
|
|
+ write_c0_entrylo0(entrylo0);
|
|
+ write_c0_entrylo1(entrylo1);
|
|
+ BARRIER;
|
|
+ tlb_write_indexed();
|
|
+ BARRIER;
|
|
+
|
|
+ write_c0_entryhi(old_ctx);
|
|
+ BARRIER;
|
|
+ write_c0_pagemask(old_pagemask);
|
|
+ local_flush_tlb_all();
|
|
+ local_irq_restore(flags);
|
|
+#if defined(DEBUG)
|
|
+ printk("\nold_ctx=%03d\n", old_ctx);
|
|
+
|
|
+ show_tlb();
|
|
+#endif
|
|
+}
|
|
+
|
|
+static void ipu_del_wired_entry( void )
|
|
+{
|
|
+ unsigned long flags;
|
|
+ unsigned long wired;
|
|
+
|
|
+ local_irq_save(flags);
|
|
+ wired = read_c0_wired();
|
|
+ if ( wired > 0 ) {
|
|
+ write_c0_wired(wired - 1);
|
|
+ }
|
|
+ local_irq_restore(flags);
|
|
+}
|
|
+
|
|
+static inline void ipu_buf_get( unsigned int page_shift )
|
|
+{
|
|
+ unsigned char * virt_addr;
|
|
+ int i;
|
|
+ for ( i=0; i< IPU_BUF_MAX; ++i ) {
|
|
+ if ( ipu_buf[i].addr == 0 ) {
|
|
+ break;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ if ( (ipu_buf_cnt = i) == IPU_BUF_MAX ) {
|
|
+ printk("Error, no free ipu buffer.\n");
|
|
+ return ;
|
|
+ }
|
|
+
|
|
+ virt_addr = (unsigned char *)__get_free_pages(GFP_KERNEL, page_shift);
|
|
+
|
|
+ if ( virt_addr ) {
|
|
+ ipu_buf[ipu_buf_cnt].addr = (unsigned int)virt_to_phys((void *)virt_addr);
|
|
+ ipu_buf[ipu_buf_cnt].page_shift = page_shift;
|
|
+
|
|
+ for (i = 0; i < (1<<page_shift); i++) {
|
|
+ SetPageReserved(virt_to_page(virt_addr));
|
|
+ virt_addr += PAGE_SIZE;
|
|
+ }
|
|
+ }
|
|
+ else {
|
|
+ printk("get memory Failed.\n");
|
|
+ }
|
|
+}
|
|
+
|
|
+static inline void ipu_buf_free( unsigned int phys_addr )
|
|
+{
|
|
+ unsigned char * virt_addr, *addr;
|
|
+ int cnt, i;
|
|
+
|
|
+ if ( phys_addr == 0 )
|
|
+ return ;
|
|
+
|
|
+ for ( cnt=0; cnt<IPU_BUF_MAX; ++cnt )
|
|
+ if ( phys_addr == ipu_buf[cnt].addr )
|
|
+ break;
|
|
+
|
|
+ if ( cnt == IPU_BUF_MAX ) { /* addr not in the ipu buffers */
|
|
+ printk("Invalid addr:0x%08x\n", (unsigned int)phys_addr);
|
|
+ }
|
|
+
|
|
+ virt_addr = (unsigned char *)phys_to_virt(ipu_buf[cnt].addr);
|
|
+ addr = virt_addr;
|
|
+ for (i = 0; i < (1<<ipu_buf[cnt].page_shift); i++) {
|
|
+ ClearPageReserved(virt_to_page(addr));
|
|
+ addr += PAGE_SIZE;
|
|
+ }
|
|
+
|
|
+ if ( cnt == 0 )
|
|
+ ipu_del_wired_entry();
|
|
+
|
|
+ free_pages((unsigned long )virt_addr, ipu_buf[cnt].page_shift);
|
|
+
|
|
+ ipu_buf[cnt].addr = 0;
|
|
+ ipu_buf[cnt].page_shift = 0;
|
|
+}
|
|
+
|
|
+static int ipu_read_proc (char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+
|
|
+ /* read as binary */
|
|
+ unsigned int * pint;
|
|
+ pint = (unsigned int *) (page+len);
|
|
+
|
|
+ if ( ipu_buf_cnt >= IPU_BUF_MAX ) { /* failed alloc mem, rturn 0 */
|
|
+ printk("no free buffer.\n");
|
|
+ *pint = 0;
|
|
+ }
|
|
+ else
|
|
+ *pint = (unsigned int )ipu_buf[ipu_buf_cnt].addr; /* phys addr */
|
|
+ len += sizeof(unsigned int);
|
|
+
|
|
+#if defined(DEBUG)
|
|
+ show_tlb();
|
|
+#endif
|
|
+ return len;
|
|
+
|
|
+}
|
|
+
|
|
+static int ipu_write_proc(struct file *file, const char *buffer, unsigned long count, void *data)
|
|
+{
|
|
+ unsigned int val ;
|
|
+ int cnt,i;
|
|
+ char buf[12];
|
|
+ unsigned long pid, entrylo0, entrylo1, entryhi, pagemask;
|
|
+#if defined(DEBUG)
|
|
+ printk("ipu write count=%u\n", count);
|
|
+#endif
|
|
+ if (count == (8*5+1)) {
|
|
+ for (i=0;i<12;i++) buf[i]=0;
|
|
+ strncpy(buf, buffer+8*0, 8);
|
|
+ pid = simple_strtoul(buf, 0, 16);
|
|
+ for (i=0;i<12;i++) buf[i]=0;
|
|
+ strncpy(buf, buffer+8*1, 8);
|
|
+ entrylo0 = simple_strtoul(buf, 0, 16);
|
|
+ for (i=0;i<12;i++) buf[i]=0;
|
|
+ strncpy(buf, buffer+8*2, 8);
|
|
+ entrylo1 = simple_strtoul(buf, 0, 16);
|
|
+ for (i=0;i<12;i++) buf[i]=0;
|
|
+ strncpy(buf, buffer+8*3, 8);
|
|
+ entryhi = simple_strtoul(buf, 0, 16);
|
|
+ for (i=0;i<12;i++) buf[i]=0;
|
|
+ strncpy(buf, buffer+8*4, 8);
|
|
+ pagemask = simple_strtoul(buf, 0, 16);
|
|
+
|
|
+#if defined(DEBUG)
|
|
+ printk("pid=0x%08x, entrylo0=0x%08x, entrylo1=0x%08x, entryhi=0x%08x, pagemask=0x%08x\n",
|
|
+ pid, entrylo0, entrylo1, entryhi, pagemask);
|
|
+#endif
|
|
+ ipu_add_wired_entry( pid, entrylo0, entrylo1, entryhi, pagemask);
|
|
+ return 41;
|
|
+ }
|
|
+ else if ( count <= 8+1 ) {
|
|
+ for (i=0;i<12;i++) buf[i]=0;
|
|
+ strncpy(buf, buffer, 8);
|
|
+ val = simple_strtoul(buf, 0, 16);
|
|
+ } else if (count == 44) {
|
|
+ for (i = 0; i < 12; i++)
|
|
+ buf[i] = 0;
|
|
+ strncpy(buf, buffer, 10);
|
|
+ pid = simple_strtoul(buf, 0, 16);
|
|
+ for (i = 0; i < 12; i++)
|
|
+ buf[i] = 0;
|
|
+ strncpy(buf, buffer + 11, 10);
|
|
+ entryhi = simple_strtoul(buf, 0, 16);//vaddr
|
|
+ for (i = 0; i < 12; i++)
|
|
+ buf[i] = 0;
|
|
+ strncpy(buf, buffer + 22, 10);
|
|
+ entrylo0 = simple_strtoul(buf, 0, 16);//paddr
|
|
+ for (i = 0; i < 12; i++)
|
|
+ buf[i] = 0;
|
|
+ strncpy(buf, buffer + 33, 10);
|
|
+ pagemask = simple_strtoul(buf, 0, 16);
|
|
+ pagemask = 0x3ff << 13; /* Fixed to 4MB page size */
|
|
+ ipu_add_wired_entry(pid, entrylo0, 0, entryhi, pagemask);
|
|
+ return 44;
|
|
+ } else {
|
|
+ printk("ipu write count error, count=%d\n.", (unsigned int)count);
|
|
+ return -1;
|
|
+ }
|
|
+
|
|
+ /* val: 1-9, page_shift, val>= 10: ipu_buf.addr */
|
|
+ if ( val == 0 ) { /* debug, print ipu_buf info */
|
|
+ for ( cnt=0; cnt<IPU_BUF_MAX; ++cnt)
|
|
+ printk("ipu_buf[%d]: addr=0x%08x, page_shift=%d\n",
|
|
+ cnt, ipu_buf[cnt].addr, ipu_buf[cnt].page_shift );
|
|
+#if defined(DEBUG)
|
|
+ show_tlb();
|
|
+#endif
|
|
+ }
|
|
+ else if ( 0< val && val < 10 ) {
|
|
+ ipu_buf_get(val);
|
|
+ }
|
|
+ else if ( val == 0xff ) { /* 255: free all ipu_buf */
|
|
+ for ( cnt=0; cnt<IPU_BUF_MAX; ++cnt ) {
|
|
+ ipu_buf_free(ipu_buf[cnt].addr);
|
|
+ }
|
|
+ }
|
|
+ else {
|
|
+ ipu_buf_free(val);
|
|
+ }
|
|
+
|
|
+ return count;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * UDC hotplug
|
|
+ */
|
|
+#ifdef CONFIG_JZ_UDC_HOTPLUG
|
|
+extern int jz_udc_active; /* defined in drivers/char/jzchar/jz_udc_hotplug.c */
|
|
+#endif
|
|
+
|
|
+#ifndef GPIO_UDC_HOTPLUG
|
|
+#define GPIO_UDC_HOTPLUG 86
|
|
+#endif
|
|
+
|
|
+static int udc_read_proc(char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+
|
|
+ if (__gpio_get_pin(GPIO_UDC_HOTPLUG)) {
|
|
+
|
|
+#ifdef CONFIG_JZ_UDC_HOTPLUG
|
|
+
|
|
+ /* Cable has connected, wait for disconnection. */
|
|
+ __gpio_as_irq_fall_edge(GPIO_UDC_HOTPLUG);
|
|
+
|
|
+ if (jz_udc_active)
|
|
+ len += sprintf (page+len, "CONNECT_CABLE\n");
|
|
+ else
|
|
+ len += sprintf (page+len, "CONNECT_POWER\n");
|
|
+#else
|
|
+ len += sprintf (page+len, "CONNECT\n");
|
|
+#endif
|
|
+ }
|
|
+ else {
|
|
+
|
|
+#ifdef CONFIG_JZ_UDC_HOTPLUG
|
|
+ /* Cable has disconnected, wait for connection. */
|
|
+ __gpio_as_irq_rise_edge(GPIO_UDC_HOTPLUG);
|
|
+#endif
|
|
+
|
|
+ len += sprintf (page+len, "REMOVE\n");
|
|
+ }
|
|
+
|
|
+ return len;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * MMC/SD hotplug
|
|
+ */
|
|
+
|
|
+#ifndef MSC_HOTPLUG_PIN
|
|
+#define MSC_HOTPLUG_PIN 90
|
|
+#endif
|
|
+
|
|
+static int mmc_read_proc (char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+
|
|
+ if (__gpio_get_pin(MSC_HOTPLUG_PIN))
|
|
+ len += sprintf (page+len, "REMOVE\n");
|
|
+ else
|
|
+ len += sprintf (page+len, "INSERT\n");
|
|
+
|
|
+ return len;
|
|
+}
|
|
+
|
|
+/***********************************************************************
|
|
+ * IPU memory management (used by mplayer and other apps)
|
|
+ *
|
|
+ * We reserved 4MB memory for IPU
|
|
+ * The memory base address is jz_ipu_framebuf
|
|
+ */
|
|
+
|
|
+/* Usage:
|
|
+ *
|
|
+ * echo n > /proc/jz/imem // n = [0,...,10], allocate memory, 2^n pages
|
|
+ * echo xxxxxxxx > /proc/jz/imem // free buffer which addr is xxxxxxxx
|
|
+ * echo FF > /proc/jz/ipu // FF, free all buffers
|
|
+ * od -X /proc/jz/imem // return the allocated buffer address and the max order of free buffer
|
|
+ */
|
|
+
|
|
+//#define DEBUG_IMEM 1
|
|
+
|
|
+#define IMEM_MAX_ORDER 10 /* max 2^10 * 4096 = 4MB */
|
|
+
|
|
+static unsigned int jz_imem_base; /* physical base address of ipu memory */
|
|
+
|
|
+static unsigned int allocated_phys_addr = 0;
|
|
+
|
|
+/*
|
|
+ * Allocated buffer list
|
|
+ */
|
|
+typedef struct imem_list {
|
|
+ unsigned int phys_start; /* physical start addr */
|
|
+ unsigned int phys_end; /* physical end addr */
|
|
+ struct imem_list *next;
|
|
+} imem_list_t;
|
|
+
|
|
+static struct imem_list *imem_list_head = NULL; /* up sorted by phys_start */
|
|
+
|
|
+#ifdef DEBUG_IMEM
|
|
+static void dump_imem_list(void)
|
|
+{
|
|
+ struct imem_list *imem;
|
|
+
|
|
+ printk("*** dump_imem_list 0x%x ***\n", (u32)imem_list_head);
|
|
+ imem = imem_list_head;
|
|
+ while (imem) {
|
|
+ printk("imem=0x%x phys_start=0x%x phys_end=0x%x next=0x%x\n", (u32)imem, imem->phys_start, imem->phys_end, (u32)imem->next);
|
|
+ imem = imem->next;
|
|
+ }
|
|
+}
|
|
+#endif
|
|
+
|
|
+/* allocate 2^order pages inside the 4MB memory */
|
|
+static int imem_alloc(unsigned int order)
|
|
+{
|
|
+ int alloc_ok = 0;
|
|
+ unsigned int start, end;
|
|
+ unsigned int size = (1 << order) * PAGE_SIZE;
|
|
+ struct imem_list *imem, *imemn, *imemp;
|
|
+
|
|
+ allocated_phys_addr = 0;
|
|
+
|
|
+ start = jz_imem_base;
|
|
+ end = start + (1 << IMEM_MAX_ORDER) * PAGE_SIZE;
|
|
+
|
|
+ imem = imem_list_head;
|
|
+ while (imem) {
|
|
+ if ((imem->phys_start - start) >= size) {
|
|
+ /* we got a valid address range */
|
|
+ alloc_ok = 1;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ start = imem->phys_end + 1;
|
|
+ imem = imem->next;
|
|
+ }
|
|
+
|
|
+ if (!alloc_ok) {
|
|
+ if ((end - start) >= size)
|
|
+ alloc_ok = 1;
|
|
+ }
|
|
+
|
|
+ if (alloc_ok) {
|
|
+ end = start + size - 1;
|
|
+ allocated_phys_addr = start;
|
|
+
|
|
+ /* add to imem_list, up sorted by phys_start */
|
|
+ imemn = kmalloc(sizeof(struct imem_list), GFP_KERNEL);
|
|
+ if (!imemn) {
|
|
+ return -ENOMEM;
|
|
+ }
|
|
+ imemn->phys_start = start;
|
|
+ imemn->phys_end = end;
|
|
+ imemn->next = NULL;
|
|
+
|
|
+ if (!imem_list_head)
|
|
+ imem_list_head = imemn;
|
|
+ else {
|
|
+ imem = imemp = imem_list_head;
|
|
+ while (imem) {
|
|
+ if (start < imem->phys_start) {
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ imemp = imem;
|
|
+ imem = imem->next;
|
|
+ }
|
|
+
|
|
+ if (imem == imem_list_head) {
|
|
+ imem_list_head = imemn;
|
|
+ imemn->next = imem;
|
|
+ }
|
|
+ else {
|
|
+ imemn->next = imemp->next;
|
|
+ imemp->next = imemn;
|
|
+ }
|
|
+ }
|
|
+ }
|
|
+
|
|
+#ifdef DEBUG_IMEM
|
|
+ dump_imem_list();
|
|
+#endif
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void imem_free(unsigned int phys_addr)
|
|
+{
|
|
+ struct imem_list *imem, *imemp;
|
|
+
|
|
+ imem = imemp = imem_list_head;
|
|
+ while (imem) {
|
|
+ if (phys_addr == imem->phys_start) {
|
|
+ if (imem == imem_list_head) {
|
|
+ imem_list_head = imem->next;
|
|
+ }
|
|
+ else {
|
|
+ imemp->next = imem->next;
|
|
+ }
|
|
+
|
|
+ kfree(imem);
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ imemp = imem;
|
|
+ imem = imem->next;
|
|
+ }
|
|
+
|
|
+#ifdef DEBUG_IMEM
|
|
+ dump_imem_list();
|
|
+#endif
|
|
+}
|
|
+
|
|
+static void imem_free_all(void)
|
|
+{
|
|
+ struct imem_list *imem;
|
|
+
|
|
+ imem = imem_list_head;
|
|
+ while (imem) {
|
|
+ kfree(imem);
|
|
+ imem = imem->next;
|
|
+ }
|
|
+
|
|
+ imem_list_head = NULL;
|
|
+
|
|
+ allocated_phys_addr = 0;
|
|
+
|
|
+#ifdef DEBUG_IMEM
|
|
+ dump_imem_list();
|
|
+#endif
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Return the allocated buffer address and the max order of free buffer
|
|
+ */
|
|
+static int imem_read_proc(char *page, char **start, off_t off,
|
|
+ int count, int *eof, void *data)
|
|
+{
|
|
+ int len = 0;
|
|
+ unsigned int start_addr, end_addr, max_order, max_size;
|
|
+ struct imem_list *imem;
|
|
+
|
|
+ unsigned int *tmp = (unsigned int *)(page + len);
|
|
+
|
|
+ start_addr = jz_imem_base;
|
|
+ end_addr = start_addr + (1 << IMEM_MAX_ORDER) * PAGE_SIZE;
|
|
+
|
|
+ if (!imem_list_head)
|
|
+ max_size = end_addr - start_addr;
|
|
+ else {
|
|
+ max_size = 0;
|
|
+ imem = imem_list_head;
|
|
+ while (imem) {
|
|
+ if (max_size < (imem->phys_start - start_addr))
|
|
+ max_size = imem->phys_start - start_addr;
|
|
+
|
|
+ start_addr = imem->phys_end + 1;
|
|
+ imem = imem->next;
|
|
+ }
|
|
+
|
|
+ if (max_size < (end_addr - start_addr))
|
|
+ max_size = end_addr - start_addr;
|
|
+ }
|
|
+
|
|
+ if (max_size > 0) {
|
|
+ max_order = get_order(max_size);
|
|
+ if (((1 << max_order) * PAGE_SIZE) > max_size)
|
|
+ max_order--;
|
|
+ }
|
|
+ else {
|
|
+ max_order = 0xffffffff; /* No any free buffer */
|
|
+ }
|
|
+
|
|
+ *tmp++ = allocated_phys_addr; /* address allocated by 'echo n > /proc/jz/imem' */
|
|
+ *tmp = max_order; /* max order of current free buffers */
|
|
+
|
|
+ len += 2 * sizeof(unsigned int);
|
|
+
|
|
+ return len;
|
|
+}
|
|
+
|
|
+static int imem_write_proc(struct file *file, const char *buffer, unsigned long count, void *data)
|
|
+{
|
|
+ unsigned int val;
|
|
+
|
|
+ val = simple_strtoul(buffer, 0, 16);
|
|
+
|
|
+ if (val == 0xff) {
|
|
+ /* free all memory */
|
|
+ imem_free_all();
|
|
+ }
|
|
+ else if ((val >= 0) && (val <= IMEM_MAX_ORDER)) {
|
|
+ /* allocate 2^val pages */
|
|
+ imem_alloc(val);
|
|
+ }
|
|
+ else {
|
|
+ /* free buffer which phys_addr is val */
|
|
+ imem_free(val);
|
|
+ }
|
|
+
|
|
+ return count;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * /proc/jz/xxx entry
|
|
+ *
|
|
+ */
|
|
+static int __init jz_proc_init(void)
|
|
+{
|
|
+ struct proc_dir_entry *res;
|
|
+ unsigned int virt_addr, i;
|
|
+
|
|
+ proc_jz_root = proc_mkdir("jz", 0);
|
|
+
|
|
+ /* External Memory Controller */
|
|
+ res = create_proc_entry("emc", 0644, proc_jz_root);
|
|
+ if (res) {
|
|
+ res->read_proc = emc_read_proc;
|
|
+ res->write_proc = NULL;
|
|
+ res->data = NULL;
|
|
+ }
|
|
+
|
|
+ /* Power Management Controller */
|
|
+ res = create_proc_entry("pmc", 0644, proc_jz_root);
|
|
+ if (res) {
|
|
+ res->read_proc = pmc_read_proc;
|
|
+ res->write_proc = pmc_write_proc;
|
|
+ res->data = NULL;
|
|
+ }
|
|
+
|
|
+ /* Clock Generation Module */
|
|
+ res = create_proc_entry("cgm", 0644, proc_jz_root);
|
|
+ if (res) {
|
|
+ res->read_proc = cgm_read_proc;
|
|
+ res->write_proc = cgm_write_proc;
|
|
+ res->data = NULL;
|
|
+ }
|
|
+
|
|
+ /* Image process unit */
|
|
+ res = create_proc_entry("ipu", 0644, proc_jz_root);
|
|
+ if (res) {
|
|
+ res->read_proc = ipu_read_proc;
|
|
+ res->write_proc = ipu_write_proc;
|
|
+ res->data = NULL;
|
|
+ }
|
|
+
|
|
+ /* udc hotplug */
|
|
+ res = create_proc_entry("udc", 0644, proc_jz_root);
|
|
+ if (res) {
|
|
+ res->read_proc = udc_read_proc;
|
|
+ res->write_proc = NULL;
|
|
+ res->data = NULL;
|
|
+ }
|
|
+
|
|
+ /* mmc hotplug */
|
|
+ res = create_proc_entry("mmc", 0644, proc_jz_root);
|
|
+ if (res) {
|
|
+ res->read_proc = mmc_read_proc;
|
|
+ res->write_proc = NULL;
|
|
+ res->data = NULL;
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * Reserve a 4MB memory for IPU on JZ4750D.
|
|
+ */
|
|
+ jz_imem_base = (unsigned int)__get_free_pages(GFP_KERNEL, IMEM_MAX_ORDER);
|
|
+ if (jz_imem_base) {
|
|
+ /* imem (IPU memory management) */
|
|
+ res = create_proc_entry("imem", 0644, proc_jz_root);
|
|
+ if (res) {
|
|
+ res->read_proc = imem_read_proc;
|
|
+ res->write_proc = imem_write_proc;
|
|
+ res->data = NULL;
|
|
+ }
|
|
+
|
|
+ /* Set page reserved */
|
|
+ virt_addr = jz_imem_base;
|
|
+ for (i = 0; i < (1 << IMEM_MAX_ORDER); i++) {
|
|
+ SetPageReserved(virt_to_page((void *)virt_addr));
|
|
+ virt_addr += PAGE_SIZE;
|
|
+ }
|
|
+
|
|
+ /* Convert to physical address */
|
|
+ jz_imem_base = virt_to_phys((void *)jz_imem_base);
|
|
+
|
|
+ printk("Total %dMB memory at 0x%x was reserved for IPU\n",
|
|
+ (unsigned int)((1 << IMEM_MAX_ORDER) * PAGE_SIZE)/1000000, jz_imem_base);
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+__initcall(jz_proc_init);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750d/prom.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750d/prom.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,198 @@
|
|
+/*
|
|
+ *
|
|
+ * BRIEF MODULE DESCRIPTION
|
|
+ * PROM library initialisation code, supports YAMON and U-Boot.
|
|
+ *
|
|
+ * Copyright 2000, 2001, 2006 MontaVista Software Inc.
|
|
+ * Author: MontaVista Software, Inc.
|
|
+ * ppopov@mvista.com or source@mvista.com
|
|
+ *
|
|
+ * This file was derived from Carsten Langgaard's
|
|
+ * arch/mips/mips-boards/xx files.
|
|
+ *
|
|
+ * Carsten Langgaard, carstenl@mips.com
|
|
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License as published by the
|
|
+ * Free Software Foundation; either version 2 of the License, or (at your
|
|
+ * option) any later version.
|
|
+ *
|
|
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
|
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
|
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License along
|
|
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
|
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
+ */
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/string.h>
|
|
+
|
|
+#include <asm/bootinfo.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+/* #define DEBUG_CMDLINE */
|
|
+
|
|
+int prom_argc;
|
|
+char **prom_argv, **prom_envp;
|
|
+
|
|
+char * prom_getcmdline(void)
|
|
+{
|
|
+ return &(arcs_cmdline[0]);
|
|
+}
|
|
+
|
|
+void prom_init_cmdline(void)
|
|
+{
|
|
+ char *cp;
|
|
+ int actr;
|
|
+
|
|
+ actr = 1; /* Always ignore argv[0] */
|
|
+
|
|
+ cp = &(arcs_cmdline[0]);
|
|
+ while(actr < prom_argc) {
|
|
+ strcpy(cp, prom_argv[actr]);
|
|
+ cp += strlen(prom_argv[actr]);
|
|
+ *cp++ = ' ';
|
|
+ actr++;
|
|
+ }
|
|
+ if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
|
|
+ --cp;
|
|
+ if (prom_argc > 1)
|
|
+ *cp = '\0';
|
|
+
|
|
+}
|
|
+
|
|
+
|
|
+char *prom_getenv(char *envname)
|
|
+{
|
|
+#if 0
|
|
+ /*
|
|
+ * Return a pointer to the given environment variable.
|
|
+ * YAMON uses "name", "value" pairs, while U-Boot uses "name=value".
|
|
+ */
|
|
+
|
|
+ char **env = prom_envp;
|
|
+ int i = strlen(envname);
|
|
+ int yamon = (*env && strchr(*env, '=') == NULL);
|
|
+
|
|
+ while (*env) {
|
|
+ if (yamon) {
|
|
+ if (strcmp(envname, *env++) == 0)
|
|
+ return *env;
|
|
+ } else {
|
|
+ if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=')
|
|
+ return *env + i + 1;
|
|
+ }
|
|
+ env++;
|
|
+ }
|
|
+#endif
|
|
+ return NULL;
|
|
+}
|
|
+
|
|
+inline unsigned char str2hexnum(unsigned char c)
|
|
+{
|
|
+ if(c >= '0' && c <= '9')
|
|
+ return c - '0';
|
|
+ if(c >= 'a' && c <= 'f')
|
|
+ return c - 'a' + 10;
|
|
+ if(c >= 'A' && c <= 'F')
|
|
+ return c - 'A' + 10;
|
|
+ return 0; /* foo */
|
|
+}
|
|
+
|
|
+inline void str2eaddr(unsigned char *ea, unsigned char *str)
|
|
+{
|
|
+ int i;
|
|
+
|
|
+ for(i = 0; i < 6; i++) {
|
|
+ unsigned char num;
|
|
+
|
|
+ if((*str == '.') || (*str == ':'))
|
|
+ str++;
|
|
+ num = str2hexnum(*str++) << 4;
|
|
+ num |= (str2hexnum(*str++));
|
|
+ ea[i] = num;
|
|
+ }
|
|
+}
|
|
+
|
|
+int get_ethernet_addr(char *ethernet_addr)
|
|
+{
|
|
+ char *ethaddr_str;
|
|
+
|
|
+ ethaddr_str = prom_getenv("ethaddr");
|
|
+ if (!ethaddr_str) {
|
|
+ printk("ethaddr not set in boot prom\n");
|
|
+ return -1;
|
|
+ }
|
|
+ str2eaddr(ethernet_addr, ethaddr_str);
|
|
+
|
|
+#if 0
|
|
+ {
|
|
+ int i;
|
|
+
|
|
+ printk("get_ethernet_addr: ");
|
|
+ for (i=0; i<5; i++)
|
|
+ printk("%02x:", (unsigned char)*(ethernet_addr+i));
|
|
+ printk("%02x\n", *(ethernet_addr+i));
|
|
+ }
|
|
+#endif
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+void __init prom_free_prom_memory(void)
|
|
+{
|
|
+}
|
|
+
|
|
+void __init prom_init(void)
|
|
+{
|
|
+ unsigned char *memsize_str;
|
|
+ unsigned long memsize;
|
|
+
|
|
+ prom_argc = (int) fw_arg0;
|
|
+ prom_argv = (char **) fw_arg1;
|
|
+ prom_envp = (char **) fw_arg2;
|
|
+
|
|
+ mips_machtype = MACH_INGENIC_JZ4750D;
|
|
+
|
|
+ prom_init_cmdline();
|
|
+ memsize_str = prom_getenv("memsize");
|
|
+ if (!memsize_str) {
|
|
+ memsize = 0x04000000;
|
|
+ } else {
|
|
+ memsize = simple_strtol(memsize_str, NULL, 0);
|
|
+ }
|
|
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
|
|
+}
|
|
+
|
|
+/* used by early printk */
|
|
+void prom_putchar(char c)
|
|
+{
|
|
+ volatile u8 *uart_lsr = (volatile u8 *)(UART0_BASE + OFF_LSR);
|
|
+ volatile u8 *uart_tdr = (volatile u8 *)(UART0_BASE + OFF_TDR);
|
|
+
|
|
+ /* Wait for fifo to shift out some bytes */
|
|
+ while ( !((*uart_lsr & (UARTLSR_TDRQ | UARTLSR_TEMT)) == 0x60) );
|
|
+
|
|
+ *uart_tdr = (u8)c;
|
|
+}
|
|
+
|
|
+const char *get_system_type(void)
|
|
+{
|
|
+ return "JZ4750D";
|
|
+}
|
|
+
|
|
+EXPORT_SYMBOL(prom_getcmdline);
|
|
+EXPORT_SYMBOL(get_ethernet_addr);
|
|
+EXPORT_SYMBOL(str2eaddr);
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750d/reset.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750d/reset.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,46 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4750/reset.c
|
|
+ *
|
|
+ * JZ4750 reset routines.
|
|
+ *
|
|
+ * Copyright (c) 2006-2007 Ingenic Semiconductor Inc.
|
|
+ * Author: <yliu@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+#include <linux/sched.h>
|
|
+#include <linux/mm.h>
|
|
+#include <asm/io.h>
|
|
+#include <asm/pgtable.h>
|
|
+#include <asm/processor.h>
|
|
+#include <asm/reboot.h>
|
|
+#include <asm/system.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+void jz_restart(char *command)
|
|
+{
|
|
+ printk("Restarting after 4 ms\n");
|
|
+ REG_WDT_TCSR = WDT_TCSR_PRESCALE4 | WDT_TCSR_EXT_EN;
|
|
+ REG_WDT_TCNT = 0;
|
|
+ REG_WDT_TDR = JZ_EXTAL/1000; /* reset after 4ms */
|
|
+ REG_TCU_TSCR = TCU_TSCR_WDTSC; /* enable wdt clock */
|
|
+ REG_WDT_TCER = WDT_TCER_TCEN; /* wdt start */
|
|
+ while (1);
|
|
+}
|
|
+
|
|
+void jz_halt(void)
|
|
+{
|
|
+ printk(KERN_NOTICE "\n** You can safely turn off the power\n");
|
|
+
|
|
+ while (1)
|
|
+ __asm__(".set\tmips3\n\t"
|
|
+ "wait\n\t"
|
|
+ ".set\tmips0");
|
|
+}
|
|
+
|
|
+void jz_power_off(void)
|
|
+{
|
|
+ jz_halt();
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750d/setup.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750d/setup.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,199 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4750d/common/setup.c
|
|
+ *
|
|
+ * JZ4750D common setup routines.
|
|
+ *
|
|
+ * Copyright (C) 2006 Ingenic Semiconductor Inc.
|
|
+ *
|
|
+ * This program is free software; you can distribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License (Version 2) as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ * This program is distributed in the hope it will be useful, but WITHOUT
|
|
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
+ * for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License along
|
|
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
|
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
|
|
+ *
|
|
+ */
|
|
+#include <linux/init.h>
|
|
+#include <linux/string.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/io.h>
|
|
+#include <linux/irq.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/tty.h>
|
|
+#include <linux/serial.h>
|
|
+#include <linux/serial_core.h>
|
|
+#include <linux/serial_8250.h>
|
|
+
|
|
+#include <asm/cpu.h>
|
|
+#include <asm/bootinfo.h>
|
|
+#include <asm/irq.h>
|
|
+#include <asm/mipsregs.h>
|
|
+#include <asm/reboot.h>
|
|
+#include <asm/pgtable.h>
|
|
+#include <asm/time.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+#ifdef CONFIG_PC_KEYB
|
|
+#include <asm/keyboard.h>
|
|
+#endif
|
|
+
|
|
+jz_clocks_t jz_clocks;
|
|
+
|
|
+extern char * __init prom_getcmdline(void);
|
|
+extern void __init jz_board_setup(void);
|
|
+extern void jz_restart(char *);
|
|
+extern void jz_halt(void);
|
|
+extern void jz_power_off(void);
|
|
+extern void jz_time_init(void);
|
|
+
|
|
+static void __init sysclocks_setup(void)
|
|
+{
|
|
+#ifndef CONFIG_MIPS_JZ_EMURUS /* FPGA */
|
|
+ jz_clocks.cclk = __cpm_get_cclk();
|
|
+ jz_clocks.hclk = __cpm_get_hclk();
|
|
+ jz_clocks.pclk = __cpm_get_pclk();
|
|
+ jz_clocks.mclk = __cpm_get_mclk();
|
|
+ jz_clocks.lcdclk = __cpm_get_lcdclk();
|
|
+ jz_clocks.pixclk = __cpm_get_pixclk();
|
|
+ jz_clocks.i2sclk = __cpm_get_i2sclk();
|
|
+ jz_clocks.usbclk = __cpm_get_usbclk();
|
|
+ jz_clocks.mscclk = __cpm_get_mscclk(0);
|
|
+ jz_clocks.extalclk = __cpm_get_extalclk();
|
|
+ jz_clocks.rtcclk = __cpm_get_rtcclk();
|
|
+#else
|
|
+
|
|
+#define FPGACLK 8000000
|
|
+
|
|
+ jz_clocks.cclk = FPGACLK;
|
|
+ jz_clocks.hclk = FPGACLK;
|
|
+ jz_clocks.pclk = FPGACLK;
|
|
+ jz_clocks.mclk = FPGACLK;
|
|
+ jz_clocks.lcdclk = FPGACLK;
|
|
+ jz_clocks.pixclk = FPGACLK;
|
|
+ jz_clocks.i2sclk = FPGACLK;
|
|
+ jz_clocks.usbclk = FPGACLK;
|
|
+ jz_clocks.mscclk = FPGACLK;
|
|
+ jz_clocks.extalclk = FPGACLK;
|
|
+ jz_clocks.rtcclk = FPGACLK;
|
|
+#endif
|
|
+
|
|
+ printk("CPU clock: %dMHz, System clock: %dMHz, Peripheral clock: %dMHz, Memory clock: %dMHz\n",
|
|
+ (jz_clocks.cclk + 500000) / 1000000,
|
|
+ (jz_clocks.hclk + 500000) / 1000000,
|
|
+ (jz_clocks.pclk + 500000) / 1000000,
|
|
+ (jz_clocks.mclk + 500000) / 1000000);
|
|
+}
|
|
+
|
|
+static void __init soc_cpm_setup(void)
|
|
+{
|
|
+ /* Start all module clocks
|
|
+ */
|
|
+ __cpm_start_all();
|
|
+
|
|
+ /* Enable CKO to external memory */
|
|
+ __cpm_enable_cko();
|
|
+
|
|
+ /* CPU enters IDLE mode when executing 'wait' instruction */
|
|
+ __cpm_idle_mode();
|
|
+
|
|
+ /* Setup system clocks */
|
|
+ sysclocks_setup();
|
|
+}
|
|
+
|
|
+static void __init soc_harb_setup(void)
|
|
+{
|
|
+// __harb_set_priority(0x00); /* CIM>LCD>DMA>ETH>PCI>USB>CBB */
|
|
+// __harb_set_priority(0x03); /* LCD>CIM>DMA>ETH>PCI>USB>CBB */
|
|
+// __harb_set_priority(0x0a); /* ETH>LCD>CIM>DMA>PCI>USB>CBB */
|
|
+}
|
|
+
|
|
+static void __init soc_emc_setup(void)
|
|
+{
|
|
+}
|
|
+
|
|
+static void __init soc_dmac_setup(void)
|
|
+{
|
|
+ __dmac_enable_module(0);
|
|
+ __dmac_enable_module(1);
|
|
+}
|
|
+
|
|
+static void __init jz_soc_setup(void)
|
|
+{
|
|
+ soc_cpm_setup();
|
|
+ soc_harb_setup();
|
|
+ soc_emc_setup();
|
|
+ soc_dmac_setup();
|
|
+}
|
|
+
|
|
+static void __init jz_serial_setup(void)
|
|
+{
|
|
+#ifdef CONFIG_SERIAL_8250
|
|
+ struct uart_port s;
|
|
+ REG8(UART0_FCR) |= UARTFCR_UUE; /* enable UART module */
|
|
+ memset(&s, 0, sizeof(s));
|
|
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
|
|
+ s.iotype = SERIAL_IO_MEM;
|
|
+ s.regshift = 2;
|
|
+ s.uartclk = jz_clocks.extalclk ;
|
|
+
|
|
+ s.line = 0;
|
|
+ s.membase = (u8 *)UART0_BASE;
|
|
+ s.irq = IRQ_UART0;
|
|
+ if (early_serial_setup(&s) != 0) {
|
|
+ printk(KERN_ERR "Serial ttyS0 setup failed!\n");
|
|
+ }
|
|
+
|
|
+ s.line = 1;
|
|
+ s.membase = (u8 *)UART1_BASE;
|
|
+ s.irq = IRQ_UART1;
|
|
+ if (early_serial_setup(&s) != 0) {
|
|
+ printk(KERN_ERR "Serial ttyS1 setup failed!\n");
|
|
+ }
|
|
+
|
|
+ s.line = 2;
|
|
+ s.membase = (u8 *)UART2_BASE;
|
|
+ s.irq = IRQ_UART2;
|
|
+
|
|
+ if (early_serial_setup(&s) != 0) {
|
|
+ printk(KERN_ERR "Serial ttyS2 setup failed!\n");
|
|
+ }
|
|
+/*
|
|
+ s.line = 3;
|
|
+ s.membase = (u8 *)UART3_BASE;
|
|
+ s.irq = IRQ_UART3;
|
|
+ if (early_serial_setup(&s) != 0) {
|
|
+ printk(KERN_ERR "Serial ttyS3 setup failed!\n");
|
|
+ }
|
|
+*/
|
|
+#endif
|
|
+}
|
|
+
|
|
+void __init plat_mem_setup(void)
|
|
+{
|
|
+ char *argptr;
|
|
+
|
|
+ argptr = prom_getcmdline();
|
|
+
|
|
+ /* IO/MEM resources. Which will be the addtion value in `inX' and
|
|
+ * `outX' macros defined in asm/io.h */
|
|
+ set_io_port_base(0);
|
|
+ ioport_resource.start = 0x00000000;
|
|
+ ioport_resource.end = 0xffffffff;
|
|
+ iomem_resource.start = 0x00000000;
|
|
+ iomem_resource.end = 0xffffffff;
|
|
+
|
|
+ _machine_restart = jz_restart;
|
|
+ _machine_halt = jz_halt;
|
|
+ pm_power_off = jz_power_off;
|
|
+
|
|
+ jz_soc_setup();
|
|
+ jz_serial_setup();
|
|
+ jz_board_setup();
|
|
+}
|
|
+
|
|
--- linux-2.6.24.7.old/arch/mips/jz4750d/time.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.24.7/arch/mips/jz4750d/time.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -0,0 +1,156 @@
|
|
+/*
|
|
+ * linux/arch/mips/jz4750d/time.c
|
|
+ *
|
|
+ * Setting up the clock on the JZ4750D boards.
|
|
+ *
|
|
+ * Copyright (C) 2008 Ingenic Semiconductor Inc.
|
|
+ * Author: <jlwei@ingenic.cn>
|
|
+ *
|
|
+ * This program is free software; you can distribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License (Version 2) as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ * This program is distributed in the hope it will be useful, but WITHOUT
|
|
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
+ * for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License along
|
|
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
|
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
|
|
+ *
|
|
+ */
|
|
+#include <linux/types.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/time.h>
|
|
+#include <linux/clockchips.h>
|
|
+
|
|
+#include <asm/time.h>
|
|
+#include <asm/jzsoc.h>
|
|
+
|
|
+/* This is for machines which generate the exact clock. */
|
|
+
|
|
+#define JZ_TIMER_IRQ IRQ_TCU0
|
|
+
|
|
+#define JZ_TIMER_CLOCK (JZ_EXTAL>>4) /* Jz timer clock frequency */
|
|
+
|
|
+static struct clocksource clocksource_jz; /* Jz clock source */
|
|
+static struct clock_event_device jz_clockevent_device; /* Jz clock event */
|
|
+
|
|
+void (*jz_timer_callback)(void);
|
|
+
|
|
+static irqreturn_t jz_timer_interrupt(int irq, void *dev_id)
|
|
+{
|
|
+ struct clock_event_device *cd = dev_id;
|
|
+
|
|
+ REG_TCU_TFCR = TCU_TFCR_OSTFCL; /* ACK timer */
|
|
+
|
|
+ if (jz_timer_callback)
|
|
+ jz_timer_callback();
|
|
+
|
|
+ cd->event_handler(cd);
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+static struct irqaction jz_irqaction = {
|
|
+ .handler = jz_timer_interrupt,
|
|
+ .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER,
|
|
+ .name = "jz-timerirq",
|
|
+};
|
|
+
|
|
+
|
|
+cycle_t jz_get_cycles(void)
|
|
+{
|
|
+ /* convert jiffes to jz timer cycles */
|
|
+ return (cycle_t)( jiffies*((JZ_TIMER_CLOCK)/HZ) + REG_TCU_OSTCNT);
|
|
+}
|
|
+
|
|
+static struct clocksource clocksource_jz = {
|
|
+ .name = "jz_clocksource",
|
|
+ .rating = 300,
|
|
+ .read = jz_get_cycles,
|
|
+ .mask = 0xFFFFFFFF,
|
|
+ .shift = 10,
|
|
+ .flags = CLOCK_SOURCE_WATCHDOG,
|
|
+};
|
|
+
|
|
+static int __init jz_clocksource_init(void)
|
|
+{
|
|
+ clocksource_jz.mult = clocksource_hz2mult(JZ_TIMER_CLOCK, clocksource_jz.shift);
|
|
+ clocksource_register(&clocksource_jz);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int jz_set_next_event(unsigned long evt,
|
|
+ struct clock_event_device *unused)
|
|
+{
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void jz_set_mode(enum clock_event_mode mode,
|
|
+ struct clock_event_device *evt)
|
|
+{
|
|
+ switch (mode) {
|
|
+ case CLOCK_EVT_MODE_PERIODIC:
|
|
+ break;
|
|
+ case CLOCK_EVT_MODE_ONESHOT:
|
|
+ case CLOCK_EVT_MODE_UNUSED:
|
|
+ case CLOCK_EVT_MODE_SHUTDOWN:
|
|
+ break;
|
|
+ case CLOCK_EVT_MODE_RESUME:
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+static struct clock_event_device jz_clockevent_device = {
|
|
+ .name = "jz-clockenvent",
|
|
+ .features = CLOCK_EVT_FEAT_PERIODIC,
|
|
+// .features = CLOCK_EVT_FEAT_ONESHOT, /* Jz4740 not support dynamic clock now */
|
|
+
|
|
+ /* .mult, .shift, .max_delta_ns and .min_delta_ns left uninitialized */
|
|
+ .rating = 300,
|
|
+ .irq = JZ_TIMER_IRQ,
|
|
+ .set_mode = jz_set_mode,
|
|
+ .set_next_event = jz_set_next_event,
|
|
+};
|
|
+
|
|
+static void __init jz_clockevent_init(void)
|
|
+{
|
|
+ struct clock_event_device *cd = &jz_clockevent_device;
|
|
+ unsigned int cpu = smp_processor_id();
|
|
+
|
|
+ cd->cpumask = cpumask_of_cpu(cpu);
|
|
+ clockevents_register_device(cd);
|
|
+}
|
|
+
|
|
+static void __init jz_timer_setup(void)
|
|
+{
|
|
+ jz_clocksource_init(); /* init jz clock source */
|
|
+ jz_clockevent_init(); /* init jz clock event */
|
|
+
|
|
+ /*
|
|
+ * Make irqs happen for the system timer
|
|
+ */
|
|
+ jz_irqaction.dev_id = &jz_clockevent_device;
|
|
+ setup_irq(JZ_TIMER_IRQ, &jz_irqaction);
|
|
+}
|
|
+
|
|
+
|
|
+void __init plat_time_init(void)
|
|
+{
|
|
+ unsigned int latch;
|
|
+
|
|
+ /* Init timer */
|
|
+ latch = (JZ_TIMER_CLOCK + (HZ>>1)) / HZ;
|
|
+
|
|
+ REG_TCU_OSTCSR = TCU_OSTCSR_PRESCALE16 | TCU_OSTCSR_EXT_EN;
|
|
+ REG_TCU_OSTCNT = 0;
|
|
+ REG_TCU_OSTDR = latch;
|
|
+
|
|
+ REG_TCU_TMCR = TCU_TMCR_OSTMCL; /* unmask match irq */
|
|
+ REG_TCU_TSCR = TCU_TSCR_OSTSC; /* enable timer clock */
|
|
+ REG_TCU_TESR = TCU_TESR_OSTST; /* start counting up */
|
|
+
|
|
+ jz_timer_setup();
|
|
+}
|
|
--- linux-2.6.24.7.old/arch/mips/kernel/cpu-probe.c 2008-05-07 01:22:34.000000000 +0200
|
|
+++ linux-2.6.24.7/arch/mips/kernel/cpu-probe.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -160,6 +160,7 @@
|
|
case CPU_25KF:
|
|
case CPU_PR4450:
|
|
case CPU_BCM3302:
|
|
+ case CPU_JZRISC:
|
|
cpu_wait = r4k_wait;
|
|
break;
|
|
|
|
@@ -860,6 +860,23 @@
|
|
}
|
|
}
|
|
|
|
+static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
|
|
+{
|
|
+ decode_configs(c);
|
|
+ c->options &= ~MIPS_CPU_COUNTER; /* JZRISC does not implement the CP0 counter. */
|
|
+ switch (c->processor_id & 0xff00) {
|
|
+ case PRID_IMP_JZRISC:
|
|
+ c->cputype = CPU_JZRISC;
|
|
+ c->isa_level = MIPS_CPU_ISA_M32R1;
|
|
+ c->tlbsize = 32;
|
|
+ __cpu_name[cpu] = "Ingenic JZRISC";
|
|
+ break;
|
|
+ default:
|
|
+ panic("Unknown Ingenic Processor ID!");
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
|
|
{
|
|
decode_configs(c);
|
|
@@ -909,6 +926,9 @@
|
|
case PRID_COMP_NXP:
|
|
cpu_probe_nxp(c, cpu);
|
|
break;
|
|
+ case PRID_COMP_INGENIC:
|
|
+ cpu_probe_ingenic(c, cpu);
|
|
+ break;
|
|
}
|
|
|
|
BUG_ON(!__cpu_name[cpu]);
|
|
--- linux-2.6.24.7.old/arch/mips/mm/c-r4k.c 2008-05-07 01:22:34.000000000 +0200
|
|
+++ linux-2.6.24.7/arch/mips/mm/c-r4k.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -874,6 +874,36 @@
|
|
c->dcache.waybit = 0;
|
|
break;
|
|
|
|
+ case CPU_JZRISC:
|
|
+ config1 = read_c0_config1();
|
|
+ config1 = (config1 >> 22) & 0x07;
|
|
+ if (config1 == 0x07)
|
|
+ config1 = 10;
|
|
+ else
|
|
+ config1 = config1 + 11;
|
|
+ config1 += 2;
|
|
+ icache_size = (1 << config1);
|
|
+ c->icache.linesz = 32;
|
|
+ c->icache.ways = 4;
|
|
+ c->icache.waybit = __ffs(icache_size / c->icache.ways);
|
|
+
|
|
+ config1 = read_c0_config1();
|
|
+ config1 = (config1 >> 13) & 0x07;
|
|
+ if (config1 == 0x07)
|
|
+ config1 = 10;
|
|
+ else
|
|
+ config1 = config1 + 11;
|
|
+ config1 += 2;
|
|
+ dcache_size = (1 << config1);
|
|
+ c->dcache.linesz = 32;
|
|
+ c->dcache.ways = 4;
|
|
+ c->dcache.waybit = __ffs(dcache_size / c->dcache.ways);
|
|
+
|
|
+ c->dcache.flags = 0;
|
|
+ c->options |= MIPS_CPU_PREFETCH;
|
|
+
|
|
+ break;
|
|
+
|
|
default:
|
|
if (!(config & MIPS_CONF_M))
|
|
panic("Don't know how to probe P-caches on this cpu.");
|
|
--- linux-2.6.24.7.old/arch/mips/mm/cache.c 2008-05-07 01:22:34.000000000 +0200
|
|
+++ linux-2.6.24.7/arch/mips/mm/cache.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -47,6 +47,8 @@
|
|
void (*_dma_cache_inv)(unsigned long start, unsigned long size);
|
|
|
|
EXPORT_SYMBOL(_dma_cache_wback_inv);
|
|
+EXPORT_SYMBOL(_dma_cache_wback);
|
|
+EXPORT_SYMBOL(_dma_cache_inv);
|
|
|
|
#endif /* CONFIG_DMA_NONCOHERENT */
|
|
|
|
--- linux-2.6.24.7.old/arch/mips/mm/tlbex.c 2009-04-12 18:05:07.000000000 +0200
|
|
+++ linux-2.6.24.7/arch/mips/mm/tlbex.c 2009-04-12 18:13:57.000000000 +0200
|
|
@@ -981,6 +981,11 @@
|
|
tlbw(p);
|
|
break;
|
|
|
|
+ case CPU_JZRISC:
|
|
+ tlbw(p);
|
|
+ uasm_i_nop(p);
|
|
+ break;
|
|
+
|
|
default:
|
|
panic("No TLB refill handler yet (CPU type: %d)",
|
|
current_cpu_data.cputype);
|