mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-24 09:10:37 +02:00
d1d50072ed
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8341 3c298f89-4303-0410-b956-a3cf2f4a3e73
471 lines
21 KiB
TeX
471 lines
21 KiB
TeX
One of the biggest challenges to getting started with embedded devices is that you
|
|
cannot just install a copy of Linux and expect to be able to compile a firmware.
|
|
Even if you did remember to install a compiler and every development tool offered,
|
|
you still would not have the basic set of tools needed to produce a firmware image.
|
|
The embedded device represents an entirely new hardware platform, which is
|
|
most of the time incompatible with the hardware on your development machine, so in a process called
|
|
cross compiling you need to produce a new compiler capable of generating code for
|
|
your embedded platform, and then use it to compile a basic Linux distribution to
|
|
run on your device.
|
|
|
|
The process of creating a cross compiler can be tricky, it is not something that is
|
|
regularly attempted and so there is a certain amount of mystery and black magic
|
|
associated with it. In many cases when you are dealing with embedded devices you will
|
|
be provided with a binary copy of a compiler and basic libraries rather than
|
|
instructions for creating your own -- it is a time saving step but at the same time
|
|
often means you will be using a rather dated set of tools. Likewise, it is also common
|
|
to be provided with a patched copy of the Linux kernel from the board or chip vendor,
|
|
but this is also dated and it can be difficult to spot exactly what has been
|
|
modified to make the kernel run on the embedded platform.
|
|
|
|
\subsection{Building an image}
|
|
|
|
OpenWrt takes a different approach to building a firmware; downloading, patching
|
|
and compiling everything from scratch, including the cross compiler. To put it
|
|
in simpler terms, OpenWrt does not contain any executables or even sources, it is an
|
|
automated system for downloading the sources, patching them to work with the given
|
|
platform and compiling them correctly for that platform. What this means is that
|
|
just by changing the template, you can change any step in the process.
|
|
|
|
As an example, if a new kernel is released, a simple change to one of the Makefiles
|
|
will download the latest kernel, patch it to run on the embedded platform and produce
|
|
a new firmware image -- there is no work to be done trying to track down an unmodified
|
|
copy of the existing kernel to see what changes had been made, the patches are
|
|
already provided and the process ends up almost completely transparent. This does not
|
|
just apply to the kernel, but to anything included with OpenWrt -- It is this one
|
|
simple understated concept which is what allows OpenWrt to stay on the bleeding edge
|
|
with the latest compilers, latest kernels and latest applications.
|
|
|
|
So let's take a look at OpenWrt and see how this all works.
|
|
|
|
|
|
\subsubsection{Download OpenWrt}
|
|
|
|
This article refers to the "Kamikaze" branch of OpenWrt, which can be downloaded via
|
|
subversion using the following command:
|
|
|
|
\begin{Verbatim}
|
|
$ svn checkout https://svn.openwrt.org/openwrt/trunk kamikaze
|
|
\end{Verbatim}
|
|
|
|
Additionally, there is a trac interface on \href{https://dev.openwrt.org/}{https://dev.openwrt.org/}
|
|
which can be used to monitor svn commits and browse the source repository.
|
|
|
|
|
|
\subsubsection{The directory structure}
|
|
|
|
There are four key directories in the base:
|
|
|
|
\begin{itemize}
|
|
\item \texttt{tools}
|
|
\item \texttt{toolchain}
|
|
\item \texttt{package}
|
|
\item \texttt{target}
|
|
\end{itemize}
|
|
|
|
\texttt{tools} and \texttt{toolchain} refer to common tools which will be
|
|
used to build the firmware image, the compiler, and the C library.
|
|
The result of this is three new directories, \texttt{tool\_build}, which is a temporary
|
|
directory for building the target independent tools, \texttt{toolchain\_build\_\textit{<arch>}}
|
|
which is used for building the toolchain for a specific architecture, and
|
|
\texttt{staging\_dir\_\textit{<arch>}} where the resulting toolchain is installed.
|
|
You will not need to do anything with the toolchain directory unless you intend to
|
|
add a new version of one of the components above.
|
|
|
|
\begin{itemize}
|
|
\item \texttt{tool\_build}
|
|
\item \texttt{toolchain\_build\_\textit{<arch>}}
|
|
\end{itemize}
|
|
|
|
\texttt{package} is for exactly that -- packages. In an OpenWrt firmware, almost everything
|
|
is an \texttt{.ipk}, a software package which can be added to the firmware to provide new
|
|
features or removed to save space. Note that packages are also maintained outside of the main
|
|
trunk and can be obtained from subversion at the following location:
|
|
|
|
\begin{Verbatim}
|
|
$ svn checkout https://svn.openwrt.org/openwrt/packages packages
|
|
\end{Verbatim}
|
|
|
|
Those packages can be used to extend the functionality of the build system and need to be
|
|
symlinked into the main trunk. Once you do that, the packages will show up in the menu for
|
|
configuration. From kamikaze you would do something like this:
|
|
|
|
\begin{Verbatim}
|
|
$ ls
|
|
kamikaze packages
|
|
$ ln -s packages/net/nmap kamikaze/package/nmap
|
|
\end{Verbatim}
|
|
|
|
To include all packages, issue the following command:
|
|
|
|
\begin{Verbatim}
|
|
$ ln -s packages/*/* kamikaze/package/
|
|
\end{Verbatim}
|
|
|
|
\texttt{target} refers to the embedded platform, this contains items which are specific to
|
|
a specific embedded platform. Of particular interest here is the "\texttt{target/linux}"
|
|
directory which is broken down by platform \textit{<arch>} and contains the patches to the
|
|
kernel, profile config, for a particular platform. There's also the "\texttt{target/image}" directory
|
|
which describes how to package a firmware for a specific platform.
|
|
|
|
Both the target and package steps will use the directory "\texttt{build\_\textit{<arch>}}"
|
|
as a temporary directory for compiling. Additionally, anything downloaded by the toolchain,
|
|
target or package steps will be placed in the "\texttt{dl}" directory.
|
|
|
|
\begin{itemize}
|
|
\item \texttt{build\_\textit{<arch>}}
|
|
\item \texttt{dl}
|
|
\end{itemize}
|
|
|
|
\subsubsection{Building OpenWrt}
|
|
|
|
While the OpenWrt build environment was intended mostly for developers, it also has to be
|
|
simple enough that an inexperienced end user can easily build his or her own customized firmware.
|
|
|
|
Running the command "\texttt{make menuconfig}" will bring up OpenWrt's configuration menu
|
|
screen, through this menu you can select which platform you're targeting, which versions of
|
|
the toolchain you want to use to build and what packages you want to install into the
|
|
firmware image. Note that it will also check to make sure you have the basic dependencies for it
|
|
to run correctly. If that fails, you will need to install some more tools in your local environment
|
|
before you can begin.
|
|
|
|
Similar to the linux kernel config, almost every option has three choices,
|
|
\texttt{y/m/n} which are represented as follows:
|
|
|
|
\begin{itemize}
|
|
\item{\texttt{<*>} (pressing y)} \\
|
|
This will be included in the firmware image
|
|
\item{\texttt{<M>} (pressing m)} \\
|
|
This will be compiled but not included (for later install)
|
|
\item{\texttt{< >} (pressing n)} \\
|
|
This will not be compiled
|
|
\end{itemize}
|
|
|
|
After you've finished with the menu configuration, exit and when prompted, save your
|
|
configuration changes.
|
|
|
|
If you want, you can also modify the kernel config for the selected target system.
|
|
simply run "\texttt{make kernel\_menuconfig}" and the build system will unpack the kernel sources
|
|
(if necessary), run menuconfig inside of the kernel tree, and then copy the kernel config
|
|
to \texttt{target/linux/\textit{<platform>}/config} so that it is preserved over
|
|
"\texttt{make clean}" calls.
|
|
|
|
To begin compiling the firmware, type "\texttt{make}". By default
|
|
OpenWrt will only display a high level overview of the compile process and not each individual
|
|
command.
|
|
|
|
\subsubsection{Example:}
|
|
|
|
\begin{Verbatim}
|
|
make[2] toolchain/install
|
|
make[3] -C toolchain install
|
|
make[2] target/compile
|
|
make[3] -C target compile
|
|
make[4] -C target/utils prepare
|
|
|
|
[...]
|
|
\end{Verbatim}
|
|
|
|
This makes it easier to monitor which step it's actually compiling and reduces the amount
|
|
of noise caused by the compile output. To see the full output, run the command
|
|
"\texttt{make V=99}".
|
|
|
|
During the build process, buildroot will download all sources to the "\texttt{dl}"
|
|
directory and will start patching and compiling them in the "\texttt{build\_\textit{<arch>}}"
|
|
directory. When finished, the resulting firmware will be in the "\texttt{bin}" directory
|
|
and packages will be in the "\texttt{bin/packages}" directory.
|
|
|
|
|
|
\subsection{Creating packages}
|
|
|
|
One of the things that we've attempted to do with OpenWrt's template system is make it
|
|
incredibly easy to port software to OpenWrt. If you look at a typical package directory
|
|
in OpenWrt you'll find two things:
|
|
|
|
\begin{itemize}
|
|
\item \texttt{package/\textit{<name>}/Makefile}
|
|
\item \texttt{package/\textit{<name>}/patches}
|
|
\item \texttt{package/\textit{<name>}/files}
|
|
\end{itemize}
|
|
|
|
The patches directory is optional and typically contains bug fixes or optimizations to
|
|
reduce the size of the executable. The package makefile is the important item, provides
|
|
the steps actually needed to download and compile the package.
|
|
|
|
The files directory is also optional and typicall contains package specific startup scripts or default configuration files that can be used out of the box with OpenWrt.
|
|
|
|
Looking at one of the package makefiles, you'd hardly recognize it as a makefile.
|
|
Through what can only be described as blatant disregard and abuse of the traditional
|
|
make format, the makefile has been transformed into an object oriented template which
|
|
simplifies the entire ordeal.
|
|
|
|
Here for example, is \texttt{package/bridge/Makefile}:
|
|
|
|
\begin{Verbatim}[frame=single,numbers=left]
|
|
# $Id: Makefile 5624 2006-11-23 00:29:07Z nbd $
|
|
|
|
include $(TOPDIR)/rules.mk
|
|
|
|
PKG_NAME:=bridge
|
|
PKG_VERSION:=1.0.6
|
|
PKG_RELEASE:=1
|
|
|
|
PKG_SOURCE:=bridge-utils-$(PKG_VERSION).tar.gz
|
|
PKG_SOURCE_URL:=@SF/bridge
|
|
PKG_MD5SUM:=9b7dc52656f5cbec846a7ba3299f73bd
|
|
PKG_CAT:=zcat
|
|
|
|
PKG_BUILD_DIR:=$(BUILD_DIR)/bridge-utils-$(PKG_VERSION)
|
|
|
|
include $(INCLUDE_DIR)/package.mk
|
|
|
|
define Package/bridge
|
|
SECTION:=net
|
|
CATEGORY:=Base system
|
|
TITLE:=Ethernet bridging configuration utility
|
|
URL:=http://bridge.sourceforge.net/
|
|
endef
|
|
|
|
define Package/bridge/description
|
|
Manage ethernet bridging:
|
|
a way to connect networks together to form a larger network.
|
|
endef
|
|
|
|
define Build/Configure
|
|
$(call Build/Configure/Default, \
|
|
--with-linux-headers="$(LINUX_DIR)" \
|
|
)
|
|
endef
|
|
|
|
define Package/bridge/install
|
|
$(INSTALL_DIR) $(1)/usr/sbin
|
|
$(INSTALL_BIN) $(PKG_BUILD_DIR)/brctl/brctl $(1)/usr/sbin/
|
|
endef
|
|
|
|
$(eval $(call BuildPackage,bridge))
|
|
\end{Verbatim}
|
|
|
|
As you can see, there's not much work to be done; everything is hidden in other makefiles
|
|
and abstracted to the point where you only need to specify a few variables.
|
|
|
|
\begin{itemize}
|
|
\item \texttt{PKG\_NAME} \\
|
|
The name of the package, as seen via menuconfig and ipkg
|
|
\item \texttt{PKG\_VERSION} \\
|
|
The upstream version number that we are downloading
|
|
\item \texttt{PKG\_RELEASE} \\
|
|
The version of this package Makefile
|
|
\item \texttt{PKG\_SOURCE} \\
|
|
The filename of the original sources
|
|
\item \texttt{PKG\_SOURCE\_URL} \\
|
|
Where to download the sources from (no trailing slash), you can add multiple download sources by separating them with a \\ and a carriage return.
|
|
\item \texttt{PKG\_MD5SUM} \\
|
|
A checksum to validate the download
|
|
\item \texttt{PKG\_CAT} \\
|
|
How to decompress the sources (zcat, bzcat, unzip)
|
|
\item \texttt{PKG\_BUILD\_DIR} \\
|
|
Where to compile the package
|
|
\end{itemize}
|
|
|
|
The \texttt{PKG\_*} variables define where to download the package from;
|
|
\texttt{@SF} is a special keyword for downloading packages from sourceforge. There is also
|
|
another keyword of \texttt{@GNU} for grabbing GNU source releases. If any of the above mentionned download source fails, the OpenWrt mirrors will be used as source.
|
|
|
|
The md5sum (if present) is used to verify the package was downloaded correctly and
|
|
\texttt{PKG\_BUILD\_DIR} defines where to find the package after the sources are
|
|
uncompressed into \texttt{\$(BUILD\_DIR)}.
|
|
|
|
At the bottom of the file is where the real magic happens, "BuildPackage" is a macro
|
|
set up by the earlier include statements. BuildPackage only takes one argument directly --
|
|
the name of the package to be built, in this case "\texttt{bridge}". All other information
|
|
is taken from the define blocks. This is a way of providing a level of verbosity, it's
|
|
inherently clear what the contents of the \texttt{description} template in
|
|
\texttt{Package/bridge} is, which wouldn't be the case if we passed this information
|
|
directly as the Nth argument to \texttt{BuildPackage}.
|
|
|
|
\texttt{BuildPackage} uses the following defines:
|
|
|
|
\textbf{\texttt{Package/\textit{<name>}}:} \\
|
|
\texttt{\textit{<name>}} matches the argument passed to buildroot, this describes
|
|
the package the menuconfig and ipkg entries. Within \texttt{Package/\textit{<name>}}
|
|
you can define the following variables:
|
|
|
|
\begin{itemize}
|
|
\item \texttt{SECTION} \\
|
|
The type of package (currently unused)
|
|
\item \texttt{CATEGORY} \\
|
|
Which menu it appears in menuconfig: Network, Sound, Utilities, Multimedia ...
|
|
\item \texttt{TITLE} \\
|
|
A short description of the package
|
|
\item \texttt{URL} \\
|
|
Where to find the original software
|
|
\item \texttt{MAINTAINER} (optional) \\
|
|
Who to contact concerning the package
|
|
\item \texttt{DEPENDS} (optional) \\
|
|
Which packages must be built/installed before this package. To reference a dependency defined in the
|
|
same Makefile, use \textit{<dependency name>}. If defined as an external package, use
|
|
\textit{+<dependency name>}. For a kernel version dependency use: \textit{@LINUX\_2\_<minor version>}
|
|
\end{itemize}
|
|
|
|
\textbf{\texttt{Package/\textit{<name>}/conffiles} (optional):} \\
|
|
A list of config files installed by this package, one file per line.
|
|
|
|
\textbf{\texttt{Build/Prepare} (optional):} \\
|
|
A set of commands to unpack and patch the sources. You may safely leave this
|
|
undefined.
|
|
|
|
\textbf{\texttt{Build/Configure} (optional):} \\
|
|
You can leave this undefined if the source doesn't use configure or has a
|
|
normal config script, otherwise you can put your own commands here or use
|
|
"\texttt{\$(call Build/Configure/Default,\textit{<first list of arguments, second list>})}" as above to
|
|
pass in additional arguments for a standard configure script. The first list of arguments will be passed
|
|
to the configure script like that: \texttt{--arg 1} \texttt{--arg 2}. The second list contains arguments that should be
|
|
defined before running the configure script such as autoconf or compiler specific variables.
|
|
|
|
To make it easier to modify the configure command line, you can either extend or completely override the following variables:
|
|
\begin{itemize}
|
|
\item \texttt{CONFIGURE\_ARGS} \\
|
|
Contains all command line arguments (format: \texttt{--arg 1} \texttt{--arg 2})
|
|
\item \texttt{CONFIGURE\_VARS} \\
|
|
Contains all environment variables that are passed to ./configure (format: \texttt{NAME="value"})
|
|
\end{itemize}
|
|
|
|
\textbf{\texttt{Build/Compile} (optional):} \\
|
|
How to compile the source; in most cases you should leave this undefined.
|
|
|
|
As with \texttt{Build/Configure} there are two variables that allow you to override
|
|
the make command line environment variables and flags:
|
|
\begin{itemize}
|
|
\item \texttt{MAKE\_FLAGS} \\
|
|
Contains all command line arguments (typically variable overrides like \texttt{NAME="value"}
|
|
\item \texttt{MAKE\_VARS} \\
|
|
Contains all environment variables that are passed to the make command
|
|
\end{itemize}
|
|
|
|
\textbf{\texttt{Package/\textit{<name>}/install}:} \\
|
|
A set of commands to copy files out of the compiled source and into the ipkg
|
|
which is represented by the \texttt{\$(1)} directory. Note that there are currently
|
|
4 defined install macros:
|
|
\begin{itemize}
|
|
\item \texttt{INSTALL\_DIR} \\
|
|
install -d -m0755
|
|
\item \texttt{INSTALL\_BIN} \\
|
|
install -m0755
|
|
\item \texttt{INSTALL\_DATA} \\
|
|
install -m0644
|
|
\item \texttt{INSTALL\_CONF} \\
|
|
install -m0600
|
|
\end{itemize}
|
|
|
|
The reason that some of the defines are prefixed by "\texttt{Package/\textit{<name>}}"
|
|
and others are simply "\texttt{Build}" is because of the possibility of generating
|
|
multiple packages from a single source. OpenWrt works under the assumption of one
|
|
source per package Makefile, but you can split that source into as many packages as
|
|
desired. Since you only need to compile the sources once, there's one global set of
|
|
"\texttt{Build}" defines, but you can add as many "Package/<name>" defines as you want
|
|
by adding extra calls to \texttt{BuildPackage} -- see the dropbear package for an example.
|
|
|
|
After you have created your \texttt{package/\textit{<name>}/Makefile}, the new package
|
|
will automatically show in the menu the next time you run "make menuconfig" and if selected
|
|
will be built automatically the next time "\texttt{make}" is run.
|
|
|
|
\subsection{Creating kernel modules packages}
|
|
|
|
The OpenWrt distribution makes the distinction between two kind of kernel modules, those coming along with the mainline kernel, and the others available as a separate project. We will see later that a common template is used for both of them.
|
|
|
|
For kernel modules that are part of the mainline kernel source, the makefiles are located in \textit{package/kernel/modules/*.mk} and they appear under the section "Kernel modules"
|
|
|
|
For external kernel modules, you can add them to the build system just like if they were software packages by defining a KernelPackage section in the package makefile.
|
|
|
|
Here for instance the Makefile for the I2C subsytem kernel modules :
|
|
|
|
\begin{Verbatim}[frame=single,numbers=left]
|
|
# $Id $
|
|
|
|
I2CMENU:=I2C Bus
|
|
|
|
define KernelPackage/i2c-core
|
|
TITLE:=I2C support
|
|
DESCRIPTION:=Kernel modules for i2c support
|
|
SUBMENU:=$(I2CMENU)
|
|
KCONFIG:=CONFIG_I2C_CORE CONFIG_I2C_DEV
|
|
FILES:=$(MODULES_DIR)/kernel/drivers/i2c/*.$(LINUX_KMOD_SUFFIX)
|
|
AUTOLOAD:=$(call AutoLoad,50,i2c-core i2c-dev)
|
|
endef
|
|
$(eval $(call KernelPackage,i2c-core))
|
|
\end{Verbatim}
|
|
|
|
To group kernel modules under a common description in menuconfig, you might want to define a \textit{<description>MENU} variable on top of the kernel modules makefile.
|
|
|
|
\begin{itemize}
|
|
\item \texttt{TITLE} \\
|
|
The name of the module as seen via menuconfig
|
|
\item \texttt{DESCRIPTION} \\
|
|
The description as seen via help in menuconfig
|
|
\item \texttt{SUBMENU} \\
|
|
The sub menu under which this package will be seen
|
|
\item \texttt{KCONFIG} \\
|
|
Kernel configuration option dependency. For external modules, remove it.
|
|
\item \texttt{FILES} \\
|
|
Files you want to inlude to this kernel module package, separate with spaces.
|
|
\item \texttt{AUTOLOAD} \\
|
|
Modules that will be loaded automatically on boot, the order you write them is the order they would be loaded.
|
|
\end{itemize}
|
|
|
|
After you have created your \texttt{package/kernel/modules/\textit{<name>}.mk}, the new kernel modules package
|
|
will automatically show in the menu under "Kernel modules" next time you run "make menuconfig" and if selected
|
|
will be built automatically the next time "\texttt{make}" is run.
|
|
|
|
\subsection{Conventions}
|
|
|
|
There are a couple conventions to follow regarding packages:
|
|
|
|
\begin{itemize}
|
|
\item \texttt{files}
|
|
\begin{enumerate}
|
|
\item configuration files follow the convention \\
|
|
\texttt{\textit{<name>}.conf}
|
|
\item init files follow the convention \\
|
|
\texttt{\textit{<name>}.init}
|
|
\end{enumerate}
|
|
\item \texttt{patches}
|
|
\begin{enumerate}
|
|
\item patches are numerically prefixed and named related to what they do
|
|
\end{enumerate}
|
|
\end{itemize}
|
|
|
|
\subsection{Troubleshooting}
|
|
|
|
If you find your package doesn't show up in menuconfig, try the following command to
|
|
see if you get the correct description:
|
|
|
|
\begin{Verbatim}
|
|
TOPDIR=$PWD make -C package/<name> DUMP=1 V=99
|
|
\end{Verbatim}
|
|
|
|
If you're just having trouble getting your package to compile, there's a few
|
|
shortcuts you can take. Instead of waiting for make to get to your package, you can
|
|
run one of the following:
|
|
|
|
\begin{itemize}
|
|
\item \texttt{make package/\textit{<name>}-clean V=99}
|
|
\item \texttt{make package/\textit{<name>}-install V=99}
|
|
\end{itemize}
|
|
|
|
Another nice trick is that if the source directory under \texttt{build\_\textit{<arch>}}
|
|
is newer than the package directory, it won't clobber it by unpacking the sources again.
|
|
If you were working on a patch you could simply edit the sources under the
|
|
\texttt{build\_\textit{<arch>}/\textit{<source>}} directory and run the install command above,
|
|
when satisfied, copy the patched sources elsewhere and diff them with the unpatched
|
|
sources. A warning though - if you go modify anything under \texttt{package/\textit{<name>}}
|
|
it will remove the old sources and unpack a fresh copy.
|
|
|
|
Other useful targets include:
|
|
|
|
\begin{itemize}
|
|
\item \texttt{make package/\textit{<name>}-prepare V=99}
|
|
\item \texttt{make package/\textit{<name>}-compile V=99}
|
|
\item \texttt{make package/\textit{<name>}-configure V=99}
|
|
\end{itemize}
|
|
|