openwrt-xburst/target/linux/olpc/patches/100-olpc.patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 9c54a5e..f88d691 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3026,6 +3026,13 @@ L:	linux-wireless@vger.kernel.org
 W:	http://prism54.org
 S:	Maintained
 
+ADM8211 WIRELESS DRIVER
+P:	Michael Wu
+M:	flamingice@sourmilk.net
+L:	netdev@vger.kernel.org
+W:	http://aluminum.sourmilk.net/adm8211/netdev/
+S:	Maintained
+
 PROMISE DC4030 CACHING DISK CONTROLLER DRIVER
 P:	Peter Denison
 M:	promise@pnd-pc.demon.co.uk
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index 97b64d7..92ceab7 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -796,6 +796,15 @@ config SECCOMP
 
 	  If unsure, say Y. Only embedded should say N here.
 
+config VGA_NOPROBE
+       bool "Don't probe VGA at boot" if EMBEDDED
+       default n
+       help
+         Saying Y here will cause the kernel to not probe VGA at boot time.
+         This will break everything that depends on the probed screen
+         data.  Say N here unless you are absolutely sure this is what you
+         want.
+
 source kernel/Kconfig.hz
 
 config KEXEC
@@ -1120,6 +1129,9 @@ config PCI_GODIRECT
 config PCI_GOANY
 	bool "Any"
 
+config PCI_GOOLPC
+	bool "OLPC"
+
 endchoice
 
 config PCI_BIOS
@@ -1129,7 +1141,7 @@ config PCI_BIOS
 
 config PCI_DIRECT
 	bool
- 	depends on PCI && ((PCI_GODIRECT || PCI_GOANY) || X86_VISWS)
+ 	depends on PCI && ((PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC) || X86_VISWS)
 	default y
 
 config PCI_MMCONFIG
@@ -1137,6 +1149,11 @@ config PCI_MMCONFIG
 	depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
 	default y
 
+config PCI_OLPC
+	bool
+	depends on PCI && PCI_GOOLPC
+	default y
+
 source "drivers/pci/pcie/Kconfig"
 
 source "drivers/pci/Kconfig"
@@ -1206,10 +1223,43 @@ config SCx200HR_TIMER
 	  processor goes idle (as is done by the scheduler).  The
 	  other workaround is idle=poll boot option.
 
+config GEODE_MFGPT_TIMER
+	bool "Geode Multi-Function General Purpose Timer (mfgpt) Support"
+	depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS
+	default y
+	help
+	  This driver provides a clock event source based on the MFGPT
+	  timer(s) in the CS5535 and CS5536 companion chip for the geode.
+	  MFGPTs have a better resolution and max interval than the
+	  generic PIT, and are suitable for use as high-res timers.
+
 config K8_NB
 	def_bool y
 	depends on AGP_AMD64
 
+config OLPC
+	bool "OLPC Support"
+	default n
+	help
+	  Add support for detecting the unique features of the OLPC 
+	  Childrens Machine
+
+config OLPC_PM
+       tristate "OLPC power management support"
+       default y
+       depends on OLPC
+       help
+         Add support for the Geode power management facilities on the
+	 OLPC Childrens Machine
+
+config OPEN_FIRMWARE
+	bool "Support for Open Firmware"
+	default y if OLPC
+	help
+	  This option adds support for the implementation of Open Firmware
+	  that is used on the OLPC Children's Machine.
+	  If unsure, say N here.
+
 source "drivers/pcmcia/Kconfig"
 
 source "drivers/pci/hotplug/Kconfig"
diff --git a/arch/i386/boot/setup.S b/arch/i386/boot/setup.S
new file mode 100644
index 0000000..4cf6e23
--- /dev/null
+++ b/arch/i386/boot/setup.S
@@ -0,0 +1,1080 @@
+/*
+ *	setup.S		Copyright (C) 1991, 1992 Linus Torvalds
+ *
+ * setup.s is responsible for getting the system data from the BIOS,
+ * and putting them into the appropriate places in system memory.
+ * both setup.s and system has been loaded by the bootblock.
+ *
+ * This code asks the bios for memory/disk/other parameters, and
+ * puts them in a "safe" place: 0x90000-0x901FF, ie where the
+ * boot-block used to be. It is then up to the protected mode
+ * system to read them from there before the area is overwritten
+ * for buffer-blocks.
+ *
+ * Move PS/2 aux init code to psaux.c
+ * (troyer@saifr00.cfsat.Honeywell.COM) 03Oct92
+ *
+ * some changes and additional features by Christoph Niemann,
+ * March 1993/June 1994 (Christoph.Niemann@linux.org)
+ *
+ * add APM BIOS checking by Stephen Rothwell, May 1994
+ * (sfr@canb.auug.org.au)
+ *
+ * High load stuff, initrd support and position independency
+ * by Hans Lermen & Werner Almesberger, February 1996
+ * <lermen@elserv.ffm.fgan.de>, <almesber@lrc.epfl.ch>
+ *
+ * Video handling moved to video.S by Martin Mares, March 1996
+ * <mj@k332.feld.cvut.cz>
+ *
+ * Extended memory detection scheme retwiddled by orc@pell.chi.il.us (david
+ * parsons) to avoid loadlin confusion, July 1997
+ *
+ * Transcribed from Intel (as86) -> AT&T (gas) by Chris Noe, May 1999.
+ * <stiker@northlink.com>
+ *
+ * Fix to work around buggy BIOSes which don't use carry bit correctly
+ * and/or report extended memory in CX/DX for e801h memory size detection 
+ * call.  As a result the kernel got wrong figures.  The int15/e801h docs
+ * from Ralf Brown interrupt list seem to indicate AX/BX should be used
+ * anyway.  So to avoid breaking many machines (presumably there was a reason
+ * to orginally use CX/DX instead of AX/BX), we do a kludge to see
+ * if CX/DX have been changed in the e801 call and if so use AX/BX .
+ * Michael Miller, April 2001 <michaelm@mjmm.org>
+ *
+ * New A20 code ported from SYSLINUX by H. Peter Anvin. AMD Elan bugfixes
+ * by Robert Schwebel, December 2001 <robert@schwebel.de>
+ */
+
+#include <asm/segment.h>
+#include <linux/utsrelease.h>
+#include <linux/compile.h>
+#include <asm/boot.h>
+#include <asm/e820.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+	
+/* Signature words to ensure LILO loaded us right */
+#define SIG1	0xAA55
+#define SIG2	0x5A5A
+
+INITSEG  = DEF_INITSEG		# 0x9000, we move boot here, out of the way
+SYSSEG   = DEF_SYSSEG		# 0x1000, system loaded at 0x10000 (65536).
+SETUPSEG = DEF_SETUPSEG		# 0x9020, this is the current segment
+				# ... and the former contents of CS
+
+DELTA_INITSEG = SETUPSEG - INITSEG	# 0x0020
+
+.code16
+.globl begtext, begdata, begbss, endtext, enddata, endbss
+
+.text
+begtext:
+.data
+begdata:
+.bss
+begbss:
+.text
+
+start:
+	jmp	trampoline
+
+# This is the setup header, and it must start at %cs:2 (old 0x9020:2)
+
+		.ascii	"HdrS"		# header signature
+		.word	0x0206		# header version number (>= 0x0105)
+					# or else old loadlin-1.5 will fail)
+realmode_swtch:	.word	0, 0		# default_switch, SETUPSEG
+start_sys_seg:	.word	SYSSEG
+		.word	kernel_version	# pointing to kernel version string
+					# above section of header is compatible
+					# with loadlin-1.5 (header v1.5). Don't
+					# change it.
+
+type_of_loader:	.byte	0		# = 0, old one (LILO, Loadlin,
+					#      Bootlin, SYSLX, bootsect...)
+					# See Documentation/i386/boot.txt for
+					# assigned ids
+	
+# flags, unused bits must be zero (RFU) bit within loadflags
+loadflags:
+LOADED_HIGH	= 1			# If set, the kernel is loaded high
+CAN_USE_HEAP	= 0x80			# If set, the loader also has set
+					# heap_end_ptr to tell how much
+					# space behind setup.S can be used for
+					# heap purposes.
+					# Only the loader knows what is free
+#ifndef __BIG_KERNEL__
+		.byte	0
+#else
+		.byte	LOADED_HIGH
+#endif
+
+setup_move_size: .word  0x8000		# size to move, when setup is not
+					# loaded at 0x90000. We will move setup 
+					# to 0x90000 then just before jumping
+					# into the kernel. However, only the
+					# loader knows how much data behind
+					# us also needs to be loaded.
+
+code32_start:				# here loaders can put a different
+					# start address for 32-bit code.
+#ifndef __BIG_KERNEL__
+		.long	0x1000		#   0x1000 = default for zImage
+#else
+		.long	0x100000	# 0x100000 = default for big kernel
+#endif
+
+ramdisk_image:	.long	0		# address of loaded ramdisk image
+					# Here the loader puts the 32-bit
+					# address where it loaded the image.
+					# This only will be read by the kernel.
+
+ramdisk_size:	.long	0		# its size in bytes
+
+bootsect_kludge:
+		.long	0		# obsolete
+
+heap_end_ptr:	.word	modelist+1024	# (Header version 0x0201 or later)
+					# space from here (exclusive) down to
+					# end of setup code can be used by setup
+					# for local heap purposes.
+
+pad1:		.word	0
+cmd_line_ptr:	.long 0			# (Header version 0x0202 or later)
+					# If nonzero, a 32-bit pointer
+					# to the kernel command line.
+					# The command line should be
+					# located between the start of
+					# setup and the end of low
+					# memory (0xa0000), or it may
+					# get overwritten before it
+					# gets read.  If this field is
+					# used, there is no longer
+					# anything magical about the
+					# 0x90000 segment; the setup
+					# can be located anywhere in
+					# low memory 0x10000 or higher.
+
+ramdisk_max:	.long (-__PAGE_OFFSET-(512 << 20)-1) & 0x7fffffff
+					# (Header version 0x0203 or later)
+					# The highest safe address for
+					# the contents of an initrd
+
+kernel_alignment:  .long CONFIG_PHYSICAL_ALIGN 	#physical addr alignment
+						#required for protected mode
+						#kernel
+#ifdef CONFIG_RELOCATABLE
+relocatable_kernel:    .byte 1
+#else
+relocatable_kernel:    .byte 0
+#endif
+pad2:			.byte 0
+pad3:			.word 0
+
+cmdline_size:   .long   COMMAND_LINE_SIZE-1     #length of the command line,
+                                                #added with boot protocol
+                                                #version 2.06
+
+trampoline:	call	start_of_setup
+		.align 16
+					# The offset at this point is 0x240
+		.space	(0xeff-0x240+1) # E820 & EDD space (ending at 0xeff)
+# End of setup header #####################################################
+
+start_of_setup:
+# Bootlin depends on this being done early
+	movw	$0x01500, %ax
+	movb	$0x81, %dl
+	int	$0x13
+
+#ifdef SAFE_RESET_DISK_CONTROLLER
+# Reset the disk controller.
+	movw	$0x0000, %ax
+	movb	$0x80, %dl
+	int	$0x13
+#endif
+
+# Set %ds = %cs, we know that SETUPSEG = %cs at this point
+	movw	%cs, %ax		# aka SETUPSEG
+	movw	%ax, %ds
+# Check signature at end of setup
+	cmpw	$SIG1, setup_sig1
+	jne	bad_sig
+
+	cmpw	$SIG2, setup_sig2
+	jne	bad_sig
+
+	jmp	good_sig1
+
+# Routine to print asciiz string at ds:si
+prtstr:
+	lodsb
+	andb	%al, %al
+	jz	fin
+
+	call	prtchr
+	jmp	prtstr
+
+fin:	ret
+
+# Space printing
+prtsp2:	call	prtspc		# Print double space
+prtspc:	movb	$0x20, %al	# Print single space (note: fall-thru)
+
+# Part of above routine, this one just prints ascii al
+prtchr:	pushw	%ax
+	pushw	%cx
+	movw	$7,%bx
+	movw	$0x01, %cx
+	movb	$0x0e, %ah
+	int	$0x10
+	popw	%cx
+	popw	%ax
+	ret
+
+beep:	movb	$0x07, %al
+	jmp	prtchr
+	
+no_sig_mess: .string	"No setup signature found ..."
+
+good_sig1:
+	jmp	good_sig
+
+# We now have to find the rest of the setup code/data
+bad_sig:
+	movw	%cs, %ax			# SETUPSEG
+	subw	$DELTA_INITSEG, %ax		# INITSEG
+	movw	%ax, %ds
+	xorb	%bh, %bh
+	movb	(497), %bl			# get setup sect from bootsect
+	subw	$4, %bx				# LILO loads 4 sectors of setup
+	shlw	$8, %bx				# convert to words (1sect=2^8 words)
+	movw	%bx, %cx
+	shrw	$3, %bx				# convert to segment
+	addw	$SYSSEG, %bx
+	movw	%bx, %cs:start_sys_seg
+# Move rest of setup code/data to here
+	movw	$2048, %di			# four sectors loaded by LILO
+	subw	%si, %si
+	pushw	%cs
+	popw	%es
+	movw	$SYSSEG, %ax
+	movw	%ax, %ds
+	rep
+	movsw
+	movw	%cs, %ax			# aka SETUPSEG
+	movw	%ax, %ds
+	cmpw	$SIG1, setup_sig1
+	jne	no_sig
+
+	cmpw	$SIG2, setup_sig2
+	jne	no_sig
+
+	jmp	good_sig
+
+no_sig:
+	lea	no_sig_mess, %si
+	call	prtstr
+
+no_sig_loop:
+	hlt
+	jmp	no_sig_loop
+
+good_sig:
+	movw	%cs, %ax			# aka SETUPSEG
+	subw	$DELTA_INITSEG, %ax 		# aka INITSEG
+	movw	%ax, %ds
+# Check if an old loader tries to load a big-kernel
+	testb	$LOADED_HIGH, %cs:loadflags	# Do we have a big kernel?
+	jz	loader_ok			# No, no danger for old loaders.
+
+	cmpb	$0, %cs:type_of_loader 		# Do we have a loader that
+						# can deal with us?
+	jnz	loader_ok			# Yes, continue.
+
+	pushw	%cs				# No, we have an old loader,
+	popw	%ds				# die. 
+	lea	loader_panic_mess, %si
+	call	prtstr
+
+	jmp	no_sig_loop
+
+loader_panic_mess: .string "Wrong loader, giving up..."
+
+# check minimum cpuid
+# we do this here because it is the last place we can actually
+# show a user visible error message. Later the video modus
+# might be already messed up.
+loader_ok:
+	call verify_cpu
+	testl  %eax,%eax
+	jz	cpu_ok
+	movw	%cs,%ax		# aka SETUPSEG
+	movw	%ax,%ds
+	lea	cpu_panic_mess,%si
+	call	prtstr
+1:	jmp	1b
+
+cpu_panic_mess:
+	.asciz  "PANIC: CPU too old for this kernel."
+
+#include "../kernel/verify_cpu.S"
+
+cpu_ok:
+# Get memory size (extended mem, kB)
+
+	xorl	%eax, %eax
+	movl	%eax, (0x1e0)
+#ifndef STANDARD_MEMORY_BIOS_CALL
+	movb	%al, (E820NR)
+# Try three different memory detection schemes.  First, try
+# e820h, which lets us assemble a memory map, then try e801h,
+# which returns a 32-bit memory size, and finally 88h, which
+# returns 0-64m
+
+# method E820H:
+# the memory map from hell.  e820h returns memory classified into
+# a whole bunch of different types, and allows memory holes and
+# everything.  We scan through this memory map and build a list
+# of the first 32 memory areas, which we return at [E820MAP].
+# This is documented at http://www.acpi.info/, in the ACPI 2.0 specification.
+
+#define SMAP  0x534d4150
+
+meme820:
+	xorl	%ebx, %ebx			# continuation counter
+	movw	$E820MAP, %di			# point into the whitelist
+						# so we can have the bios
+						# directly write into it.
+
+jmpe820:
+	movl	$0x0000e820, %eax		# e820, upper word zeroed
+	movl	$SMAP, %edx			# ascii 'SMAP'
+	movl	$20, %ecx			# size of the e820rec
+	pushw	%ds				# data record.
+	popw	%es
+	int	$0x15				# make the call
+	jc	bail820				# fall to e801 if it fails
+
+	cmpl	$SMAP, %eax			# check the return is `SMAP'
+	jne	bail820				# fall to e801 if it fails
+
+#	cmpl	$1, 16(%di)			# is this usable memory?
+#	jne	again820
+
+	# If this is usable memory, we save it by simply advancing %di by
+	# sizeof(e820rec).
+	#
+good820:
+	movb	(E820NR), %al			# up to 128 entries
+	cmpb	$E820MAX, %al
+	jae	bail820
+
+	incb	(E820NR)
+	movw	%di, %ax
+	addw	$20, %ax
+	movw	%ax, %di
+again820:
+	cmpl	$0, %ebx			# check to see if
+	jne	jmpe820				# %ebx is set to EOF
+bail820:
+
+
+# method E801H:
+# memory size is in 1k chunksizes, to avoid confusing loadlin.
+# we store the 0xe801 memory size in a completely different place,
+# because it will most likely be longer than 16 bits.
+# (use 1e0 because that's what Larry Augustine uses in his
+# alternative new memory detection scheme, and it's sensible
+# to write everything into the same place.)
+
+meme801:
+	stc					# fix to work around buggy
+	xorw	%cx,%cx				# BIOSes which don't clear/set
+	xorw	%dx,%dx				# carry on pass/error of
+						# e801h memory size call
+						# or merely pass cx,dx though
+						# without changing them.
+	movw	$0xe801, %ax
+	int	$0x15
+	jc	mem88
+
+	cmpw	$0x0, %cx			# Kludge to handle BIOSes
+	jne	e801usecxdx			# which report their extended
+	cmpw	$0x0, %dx			# memory in AX/BX rather than
+	jne	e801usecxdx			# CX/DX.  The spec I have read
+	movw	%ax, %cx			# seems to indicate AX/BX 
+	movw	%bx, %dx			# are more reasonable anyway...
+
+e801usecxdx:
+	andl	$0xffff, %edx			# clear sign extend
+	shll	$6, %edx			# and go from 64k to 1k chunks
+	movl	%edx, (0x1e0)			# store extended memory size
+	andl	$0xffff, %ecx			# clear sign extend
+ 	addl	%ecx, (0x1e0)			# and add lower memory into
+						# total size.
+
+# Ye Olde Traditional Methode.  Returns the memory size (up to 16mb or
+# 64mb, depending on the bios) in ax.
+mem88:
+
+#endif
+	movb	$0x88, %ah
+	int	$0x15
+	movw	%ax, (2)
+
+# Set the keyboard repeat rate to the max
+	movw	$0x0305, %ax
+	xorw	%bx, %bx
+	int	$0x16
+
+#ifndef CONFIG_VGA_NOPROBE
+
+# Check for video adapter and its parameters and allow the
+# user to browse video modes.
+	call	video				# NOTE: we need %ds pointing
+						# to bootsector
+#endif
+
+# Get hd0 data...
+	xorw	%ax, %ax
+	movw	%ax, %ds
+	ldsw	(4 * 0x41), %si
+	movw	%cs, %ax			# aka SETUPSEG
+	subw	$DELTA_INITSEG, %ax		# aka INITSEG
+	pushw	%ax
+	movw	%ax, %es
+	movw	$0x0080, %di
+	movw	$0x10, %cx
+	pushw	%cx
+	cld
+	rep
+ 	movsb
+# Get hd1 data...
+	xorw	%ax, %ax
+	movw	%ax, %ds
+	ldsw	(4 * 0x46), %si
+	popw	%cx
+	popw	%es
+	movw	$0x0090, %di
+	rep
+	movsb
+# Check that there IS a hd1 :-)
+	movw	$0x01500, %ax
+	movb	$0x81, %dl
+	int	$0x13
+	jc	no_disk1
+	
+	cmpb	$3, %ah
+	je	is_disk1
+
+no_disk1:
+	movw	%cs, %ax			# aka SETUPSEG
+	subw	$DELTA_INITSEG, %ax 		# aka INITSEG
+	movw	%ax, %es
+	movw	$0x0090, %di
+	movw	$0x10, %cx
+	xorw	%ax, %ax
+	cld
+	rep
+	stosb
+is_disk1:
+# check for Micro Channel (MCA) bus
+	movw	%cs, %ax			# aka SETUPSEG
+	subw	$DELTA_INITSEG, %ax		# aka INITSEG
+	movw	%ax, %ds
+	xorw	%ax, %ax
+	movw	%ax, (0xa0)			# set table length to 0
+	movb	$0xc0, %ah
+	stc
+	int	$0x15				# moves feature table to es:bx
+	jc	no_mca
+
+	pushw	%ds
+	movw	%es, %ax
+	movw	%ax, %ds
+	movw	%cs, %ax			# aka SETUPSEG
+	subw	$DELTA_INITSEG, %ax		# aka INITSEG
+	movw	%ax, %es
+	movw	%bx, %si
+	movw	$0xa0, %di
+	movw	(%si), %cx
+	addw	$2, %cx				# table length is a short
+	cmpw	$0x10, %cx
+	jc	sysdesc_ok
+
+	movw	$0x10, %cx			# we keep only first 16 bytes
+sysdesc_ok:
+	rep
+	movsb
+	popw	%ds
+no_mca:
+#ifdef CONFIG_X86_VOYAGER
+	movb	$0xff, 0x40	# flag on config found
+	movb	$0xc0, %al
+	mov	$0xff, %ah
+	int	$0x15		# put voyager config info at es:di
+	jc	no_voyager
+	movw	$0x40, %si	# place voyager info in apm table
+	cld
+	movw	$7, %cx
+voyager_rep:
+	movb	%es:(%di), %al
+	movb	%al,(%si)
+	incw	%di
+	incw	%si
+	decw	%cx
+	jnz	voyager_rep
+no_voyager:	
+#endif
+# Check for PS/2 pointing device
+	movw	%cs, %ax			# aka SETUPSEG
+	subw	$DELTA_INITSEG, %ax		# aka INITSEG
+	movw	%ax, %ds
+	movb	$0, (0x1ff)			# default is no pointing device
+	int	$0x11				# int 0x11: equipment list
+	testb	$0x04, %al			# check if mouse installed
+	jz	no_psmouse
+
+	movb	$0xAA, (0x1ff)			# device present
+no_psmouse:
+
+#if defined(CONFIG_X86_SPEEDSTEP_SMI) || defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
+	movl	$0x0000E980, %eax		# IST Support 
+	movl	$0x47534943, %edx		# Request value
+	int	$0x15
+
+	movl	%eax, (96)
+	movl	%ebx, (100)
+	movl	%ecx, (104)
+	movl	%edx, (108)
+#endif
+
+#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE)
+# Then check for an APM BIOS...
+						# %ds points to the bootsector
+	movw	$0, 0x40			# version = 0 means no APM BIOS
+	movw	$0x05300, %ax			# APM BIOS installation check
+	xorw	%bx, %bx
+	int	$0x15
+	jc	done_apm_bios			# Nope, no APM BIOS
+	
+	cmpw	$0x0504d, %bx			# Check for "PM" signature
+	jne	done_apm_bios			# No signature, no APM BIOS
+
+	andw	$0x02, %cx			# Is 32 bit supported?
+	je	done_apm_bios			# No 32-bit, no (good) APM BIOS
+
+	movw	$0x05304, %ax			# Disconnect first just in case
+	xorw	%bx, %bx
+	int	$0x15				# ignore return code
+	movw	$0x05303, %ax			# 32 bit connect
+	xorl	%ebx, %ebx
+	xorw	%cx, %cx			# paranoia :-)
+	xorw	%dx, %dx			#   ...
+	xorl	%esi, %esi			#   ...
+	xorw	%di, %di			#   ...
+	int	$0x15
+	jc	no_32_apm_bios			# Ack, error. 
+
+	movw	%ax,  (66)			# BIOS code segment
+	movl	%ebx, (68)			# BIOS entry point offset
+	movw	%cx,  (72)			# BIOS 16 bit code segment
+	movw	%dx,  (74)			# BIOS data segment
+	movl	%esi, (78)			# BIOS code segment lengths
+	movw	%di,  (82)			# BIOS data segment length
+# Redo the installation check as the 32 bit connect
+# modifies the flags returned on some BIOSs
+	movw	$0x05300, %ax			# APM BIOS installation check
+	xorw	%bx, %bx
+	xorw	%cx, %cx			# paranoia
+	int	$0x15
+	jc	apm_disconnect			# error -> shouldn't happen
+
+	cmpw	$0x0504d, %bx			# check for "PM" signature
+	jne	apm_disconnect			# no sig -> shouldn't happen
+
+	movw	%ax, (64)			# record the APM BIOS version
+	movw	%cx, (76)			# and flags
+	jmp	done_apm_bios
+
+apm_disconnect:					# Tidy up
+	movw	$0x05304, %ax			# Disconnect
+	xorw	%bx, %bx
+	int	$0x15				# ignore return code
+
+	jmp	done_apm_bios
+
+no_32_apm_bios:
+	andw	$0xfffd, (76)			# remove 32 bit support bit
+done_apm_bios:
+#endif
+
+#include "edd.S"
+
+# Now we want to move to protected mode ...
+	cmpw	$0, %cs:realmode_swtch
+	jz	rmodeswtch_normal
+
+	lcall	*%cs:realmode_swtch
+
+	jmp	rmodeswtch_end
+
+rmodeswtch_normal:
+        pushw	%cs
+	call	default_switch
+
+rmodeswtch_end:
+# Now we move the system to its rightful place ... but we check if we have a
+# big-kernel. In that case we *must* not move it ...
+	testb	$LOADED_HIGH, %cs:loadflags
+	jz	do_move0			# .. then we have a normal low
+						# loaded zImage
+						# .. or else we have a high
+						# loaded bzImage
+	jmp	end_move			# ... and we skip moving
+
+do_move0:
+	movw	$0x100, %ax			# start of destination segment
+	movw	%cs, %bp			# aka SETUPSEG
+	subw	$DELTA_INITSEG, %bp		# aka INITSEG
+	movw	%cs:start_sys_seg, %bx		# start of source segment
+	cld
+do_move:
+	movw	%ax, %es			# destination segment
+	incb	%ah				# instead of add ax,#0x100
+	movw	%bx, %ds			# source segment
+	addw	$0x100, %bx
+	subw	%di, %di
+	subw	%si, %si
+	movw 	$0x800, %cx
+	rep
+	movsw
+	cmpw	%bp, %bx			# assume start_sys_seg > 0x200,
+						# so we will perhaps read one
+						# page more than needed, but
+						# never overwrite INITSEG
+						# because destination is a
+						# minimum one page below source
+	jb	do_move
+
+end_move:
+# then we load the segment descriptors
+	movw	%cs, %ax			# aka SETUPSEG
+	movw	%ax, %ds
+		
+# Check whether we need to be downward compatible with version <=201
+	cmpl	$0, cmd_line_ptr
+	jne	end_move_self		# loader uses version >=202 features
+	cmpb	$0x20, type_of_loader
+	je	end_move_self		# bootsect loader, we know of it
+
+# Boot loader doesnt support boot protocol version 2.02.
+# If we have our code not at 0x90000, we need to move it there now.
+# We also then need to move the params behind it (commandline)
+# Because we would overwrite the code on the current IP, we move
+# it in two steps, jumping high after the first one.
+	movw	%cs, %ax
+	cmpw	$SETUPSEG, %ax
+	je	end_move_self
+
+	cli					# make sure we really have
+						# interrupts disabled !
+						# because after this the stack
+						# should not be used
+	subw	$DELTA_INITSEG, %ax		# aka INITSEG
+	movw	%ss, %dx
+	cmpw	%ax, %dx
+	jb	move_self_1
+
+	addw	$INITSEG, %dx
+	subw	%ax, %dx			# this will go into %ss after
+						# the move
+move_self_1:
+	movw	%ax, %ds
+	movw	$INITSEG, %ax			# real INITSEG
+	movw	%ax, %es
+	movw	%cs:setup_move_size, %cx
+	std					# we have to move up, so we use
+						# direction down because the
+						# areas may overlap
+	movw	%cx, %di
+	decw	%di
+	movw	%di, %si
+	subw	$move_self_here+0x200, %cx
+	rep
+	movsb
+	ljmp	$SETUPSEG, $move_self_here
+
+move_self_here:
+	movw	$move_self_here+0x200, %cx
+	rep
+	movsb
+	movw	$SETUPSEG, %ax
+	movw	%ax, %ds
+	movw	%dx, %ss
+end_move_self:					# now we are at the right place
+
+#
+# Enable A20.  This is at the very best an annoying procedure.
+# A20 code ported from SYSLINUX 1.52-1.63 by H. Peter Anvin.
+# AMD Elan bug fix by Robert Schwebel.
+#
+
+#if defined(CONFIG_X86_ELAN)
+	movb $0x02, %al			# alternate A20 gate
+	outb %al, $0x92			# this works on SC410/SC520
+a20_elan_wait:
+	call a20_test
+	jz a20_elan_wait
+	jmp a20_done
+#endif
+
+
+A20_TEST_LOOPS		=  32		# Iterations per wait
+A20_ENABLE_LOOPS	= 255		# Total loops to try		
+
+
+#ifndef CONFIG_X86_VOYAGER
+a20_try_loop:
+
+	# First, see if we are on a system with no A20 gate.
+a20_none:
+	call	a20_test
+	jnz	a20_done
+
+	# Next, try the BIOS (INT 0x15, AX=0x2401)
+a20_bios:
+	movw	$0x2401, %ax
+	pushfl					# Be paranoid about flags
+	int	$0x15
+	popfl
+
+	call	a20_test
+	jnz	a20_done
+
+	# Try enabling A20 through the keyboard controller
+#endif /* CONFIG_X86_VOYAGER */
+a20_kbc:
+	call	empty_8042
+
+#ifndef CONFIG_X86_VOYAGER
+	call	a20_test			# Just in case the BIOS worked
+	jnz	a20_done			# but had a delayed reaction.
+#endif
+
+	movb	$0xD1, %al			# command write
+	outb	%al, $0x64
+	call	empty_8042
+
+	movb	$0xDF, %al			# A20 on
+	outb	%al, $0x60
+	call	empty_8042
+
+#ifndef CONFIG_X86_VOYAGER
+	# Wait until a20 really *is* enabled; it can take a fair amount of
+	# time on certain systems; Toshiba Tecras are known to have this
+	# problem.
+a20_kbc_wait:
+	xorw	%cx, %cx
+a20_kbc_wait_loop:
+	call	a20_test
+	jnz	a20_done
+	loop	a20_kbc_wait_loop
+
+	# Final attempt: use "configuration port A"
+a20_fast:
+	inb	$0x92, %al			# Configuration Port A
+	orb	$0x02, %al			# "fast A20" version
+	andb	$0xFE, %al			# don't accidentally reset
+	outb	%al, $0x92
+
+	# Wait for configuration port A to take effect
+a20_fast_wait:
+	xorw	%cx, %cx
+a20_fast_wait_loop:
+	call	a20_test
+	jnz	a20_done
+	loop	a20_fast_wait_loop
+
+	# A20 is still not responding.  Try frobbing it again.
+	# 
+	decb	(a20_tries)
+	jnz	a20_try_loop
+	
+	movw	$a20_err_msg, %si
+	call	prtstr
+
+a20_die:
+	hlt
+	jmp	a20_die
+
+a20_tries:
+	.byte	A20_ENABLE_LOOPS
+
+a20_err_msg:
+	.ascii	"linux: fatal error: A20 gate not responding!"
+	.byte	13, 10, 0
+
+	# If we get here, all is good
+a20_done:
+
+#endif /* CONFIG_X86_VOYAGER */
+# set up gdt and idt and 32bit start address
+	lidt	idt_48				# load idt with 0,0
+	xorl	%eax, %eax			# Compute gdt_base
+	movw	%ds, %ax			# (Convert %ds:gdt to a linear ptr)
+	shll	$4, %eax
+	addl	%eax, code32
+	addl	$gdt, %eax
+	movl	%eax, (gdt_48+2)
+	lgdt	gdt_48				# load gdt with whatever is
+						# appropriate
+
+# make sure any possible coprocessor is properly reset..
+	xorw	%ax, %ax
+	outb	%al, $0xf0
+	call	delay
+
+	outb	%al, $0xf1
+	call	delay
+
+# well, that went ok, I hope. Now we mask all interrupts - the rest
+# is done in init_IRQ().
+	movb	$0xFF, %al			# mask all interrupts for now
+	outb	%al, $0xA1
+	call	delay
+	
+	movb	$0xFB, %al			# mask all irq's but irq2 which
+	outb	%al, $0x21			# is cascaded
+
+# Well, that certainly wasn't fun :-(. Hopefully it works, and we don't
+# need no steenking BIOS anyway (except for the initial loading :-).
+# The BIOS-routine wants lots of unnecessary data, and it's less
+# "interesting" anyway. This is how REAL programmers do it.
+#
+# Well, now's the time to actually move into protected mode. To make
+# things as simple as possible, we do no register set-up or anything,
+# we let the gnu-compiled 32-bit programs do that. We just jump to
+# absolute address 0x1000 (or the loader supplied one),
+# in 32-bit protected mode.
+#
+# Note that the short jump isn't strictly needed, although there are
+# reasons why it might be a good idea. It won't hurt in any case.
+	movw	$1, %ax				# protected mode (PE) bit
+	lmsw	%ax				# This is it!
+	jmp	flush_instr
+
+flush_instr:
+	xorw	%bx, %bx			# Flag to indicate a boot
+	xorl	%esi, %esi			# Pointer to real-mode code
+	movw	%cs, %si
+	subw	$DELTA_INITSEG, %si
+	shll	$4, %esi			# Convert to 32-bit pointer
+
+# jump to startup_32 in arch/i386/boot/compressed/head.S
+#	
+# NOTE: For high loaded big kernels we need a
+#	jmpi    0x100000,__BOOT_CS
+#
+#	but we yet haven't reloaded the CS register, so the default size 
+#	of the target offset still is 16 bit.
+#	However, using an operand prefix (0x66), the CPU will properly
+#	take our 48 bit far pointer. (INTeL 80386 Programmer's Reference
+#	Manual, Mixing 16-bit and 32-bit code, page 16-6)
+
+	.byte 0x66, 0xea			# prefix + jmpi-opcode
+code32:	.long	startup_32			# will be set to %cs+startup_32
+	.word	__BOOT_CS
+.code32
+startup_32:
+	movl $(__BOOT_DS), %eax
+	movl %eax, %ds
+	movl %eax, %es
+	movl %eax, %fs
+	movl %eax, %gs
+	movl %eax, %ss
+
+	xorl %eax, %eax
+1:	incl %eax				# check that A20 really IS enabled
+	movl %eax, 0x00000000			# loop forever if it isn't
+	cmpl %eax, 0x00100000
+	je 1b
+
+	# Jump to the 32bit entry point
+	jmpl *(code32_start - start + (DELTA_INITSEG << 4))(%esi)
+.code16
+
+# Here's a bunch of information about your current kernel..
+kernel_version:	.ascii	UTS_RELEASE
+		.ascii	" ("
+		.ascii	LINUX_COMPILE_BY
+		.ascii	"@"
+		.ascii	LINUX_COMPILE_HOST
+		.ascii	") "
+		.ascii	UTS_VERSION
+		.byte	0
+
+# This is the default real mode switch routine.
+# to be called just before protected mode transition
+default_switch:
+	cli					# no interrupts allowed !
+	movb	$0x80, %al			# disable NMI for bootup
+						# sequence
+	outb	%al, $0x70
+	lret
+
+
+#ifndef CONFIG_X86_VOYAGER
+# This routine tests whether or not A20 is enabled.  If so, it
+# exits with zf = 0.
+#
+# The memory address used, 0x200, is the int $0x80 vector, which
+# should be safe.
+
+A20_TEST_ADDR = 4*0x80
+
+a20_test:
+	pushw	%cx
+	pushw	%ax
+	xorw	%cx, %cx
+	movw	%cx, %fs			# Low memory
+	decw	%cx
+	movw	%cx, %gs			# High memory area
+	movw	$A20_TEST_LOOPS, %cx
+	movw	%fs:(A20_TEST_ADDR), %ax
+	pushw	%ax
+a20_test_wait:
+	incw	%ax
+	movw	%ax, %fs:(A20_TEST_ADDR)
+	call	delay				# Serialize and make delay constant
+	cmpw	%gs:(A20_TEST_ADDR+0x10), %ax
+	loope	a20_test_wait
+
+	popw	%fs:(A20_TEST_ADDR)
+	popw	%ax
+	popw	%cx
+	ret	
+
+#endif /* CONFIG_X86_VOYAGER */
+
+# This routine checks that the keyboard command queue is empty
+# (after emptying the output buffers)
+#
+# Some machines have delusions that the keyboard buffer is always full
+# with no keyboard attached...
+#
+# If there is no keyboard controller, we will usually get 0xff
+# to all the reads.  With each IO taking a microsecond and
+# a timeout of 100,000 iterations, this can take about half a
+# second ("delay" == outb to port 0x80). That should be ok,
+# and should also be plenty of time for a real keyboard controller
+# to empty.
+#
+
+empty_8042:
+	pushl	%ecx
+	movl	$100000, %ecx
+
+empty_8042_loop:
+	decl	%ecx
+	jz	empty_8042_end_loop
+
+	call	delay
+
+	inb	$0x64, %al			# 8042 status port
+	testb	$1, %al				# output buffer?
+	jz	no_output
+
+	call	delay
+	inb	$0x60, %al			# read it
+	jmp	empty_8042_loop
+
+no_output:
+	testb	$2, %al				# is input buffer full?
+	jnz	empty_8042_loop			# yes - loop
+empty_8042_end_loop:
+	popl	%ecx
+	ret
+
+# Read the cmos clock. Return the seconds in al
+gettime:
+	pushw	%cx
+	movb	$0x02, %ah
+	int	$0x1a
+	movb	%dh, %al			# %dh contains the seconds
+	andb	$0x0f, %al
+	movb	%dh, %ah
+	movb	$0x04, %cl
+	shrb	%cl, %ah
+	aad
+	popw	%cx
+	ret
+
+# Delay is needed after doing I/O
+delay:
+	outb	%al,$0x80
+	ret
+
+# Descriptor tables
+#
+# NOTE: The intel manual says gdt should be sixteen bytes aligned for
+# efficiency reasons.  However, there are machines which are known not
+# to boot with misaligned GDTs, so alter this at your peril!  If you alter
+# GDT_ENTRY_BOOT_CS (in asm/segment.h) remember to leave at least two
+# empty GDT entries (one for NULL and one reserved).
+#
+# NOTE:	On some CPUs, the GDT must be 8 byte aligned.  This is
+# true for the Voyager Quad CPU card which will not boot without
+# This directive.  16 byte aligment is recommended by intel.
+#
+	.align 16
+gdt:
+	.fill GDT_ENTRY_BOOT_CS,8,0
+
+	.word	0xFFFF				# 4Gb - (0x100000*0x1000 = 4Gb)
+	.word	0				# base address = 0
+	.word	0x9A00				# code read/exec
+	.word	0x00CF				# granularity = 4096, 386
+						#  (+5th nibble of limit)
+
+	.word	0xFFFF				# 4Gb - (0x100000*0x1000 = 4Gb)
+	.word	0				# base address = 0
+	.word	0x9200				# data read/write
+	.word	0x00CF				# granularity = 4096, 386
+						#  (+5th nibble of limit)
+gdt_end:
+	.align	4
+	
+	.word	0				# alignment byte
+idt_48:
+	.word	0				# idt limit = 0
+	.word	0, 0				# idt base = 0L
+
+	.word	0				# alignment byte
+gdt_48:
+	.word	gdt_end - gdt - 1		# gdt limit
+	.word	0, 0				# gdt base (filled in later)
+
+#ifndef CONFIG_VGA_NOPROBE
+# Include video setup & detection code
+
+#include "video.S"
+#endif
+
+# Setup signature -- must be last
+setup_sig1:	.word	SIG1
+setup_sig2:	.word	SIG2
+
+# After this point, there is some free space which is used by the video mode
+# handling code to store the temporary mode table (not used by the kernel).
+
+modelist:
+
+.text
+endtext:
+.data
+enddata:
+.bss
+endbss:
diff --git a/arch/i386/configs/olpc_defconfig b/arch/i386/configs/olpc_defconfig
new file mode 100644
index 0000000..f1675e8
--- /dev/null
+++ b/arch/i386/configs/olpc_defconfig
@@ -0,0 +1,2183 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc5
+# Wed Jun 20 08:26:53 2007
+#
+CONFIG_X86_32=y
+CONFIG_GENERIC_TIME=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_X86=y
+CONFIG_MMU=y
+CONFIG_ZONE_DMA=y
+CONFIG_QUICKLIST=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_DMI=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# Processor type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_SMP is not set
+CONFIG_X86_PC=y
+# CONFIG_X86_ELAN is not set
+# CONFIG_X86_VOYAGER is not set
+# CONFIG_X86_NUMAQ is not set
+# CONFIG_X86_SUMMIT is not set
+# CONFIG_X86_BIGSMP is not set
+# CONFIG_X86_VISWS is not set
+# CONFIG_X86_GENERICARCH is not set
+# CONFIG_X86_ES7000 is not set
+# CONFIG_PARAVIRT is not set
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP2 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MGEODEGX1 is not set
+CONFIG_MGEODE_LX=y
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_X86_GENERIC is not set
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=5
+CONFIG_X86_XADD=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y
+CONFIG_X86_USE_3DNOW=y
+CONFIG_X86_TSC=y
+CONFIG_X86_MINIMUM_CPU_MODEL=4
+# CONFIG_HPET_TIMER is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_BKL=y
+# CONFIG_X86_UP_APIC is not set
+# CONFIG_X86_MCE is not set
+# CONFIG_VM86 is not set
+# CONFIG_TOSHIBA is not set
+# CONFIG_I8K is not set
+CONFIG_X86_REBOOTFIXUPS=y
+# CONFIG_MICROCODE is not set
+CONFIG_X86_MSR=y
+CONFIG_X86_CPUID=m
+
+#
+# Firmware Drivers
+#
+# CONFIG_EDD is not set
+# CONFIG_DELL_RBU is not set
+# CONFIG_DCDBAS is not set
+CONFIG_NOHIGHMEM=y
+# CONFIG_HIGHMEM4G is not set
+# CONFIG_HIGHMEM64G is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_3G_OPT is not set
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_2G_OPT is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_NR_QUICK=1
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_MTRR is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_VGA_NOPROBE is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+CONFIG_KEXEC=y
+CONFIG_PHYSICAL_START=0x400000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+# CONFIG_COMPAT_VDSO is not set
+
+#
+# Power management options (ACPI, APM)
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+CONFIG_PM_DEBUG=y
+CONFIG_DISABLE_SUSPEND_VT_SWITCH=y
+# CONFIG_PM_TRACE is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_SOFTWARE_SUSPEND=y
+CONFIG_PM_STD_PARTITION=""
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
+# CONFIG_ACPI is not set
+# CONFIG_APM is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+# CONFIG_PCI_GOANY is not set
+CONFIG_PCI_GOOLPC=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_OLPC=y
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_DEBUG is not set
+CONFIG_ISA_DMA_API=y
+# CONFIG_ISA is not set
+# CONFIG_MCA is not set
+# CONFIG_SCx200 is not set
+CONFIG_GEODE_MFGPT_TIMER=y
+CONFIG_OLPC=y
+CONFIG_OLPC_PM=y
+CONFIG_OPEN_FIRMWARE=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+CONFIG_DEFAULT_BIC=y
+# CONFIG_DEFAULT_CUBIC is not set
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="bic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=y
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+# CONFIG_NETLABEL is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+# CONFIG_NF_CONNTRACK_MARK is not set
+# CONFIG_NF_CONNTRACK_SECMARK is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_IPRANGE is not set
+# CONFIG_IP_NF_MATCH_TOS is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_MATCH_OWNER is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+CONFIG_IP_NF_TARGET_LOG=m
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_SIP is not set
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+# CONFIG_NET_ACT_IPT is not set
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_ESTIMATOR=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+CONFIG_IEEE80211_SOFTMAC_DEBUG=y
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=m
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_TS5500 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_CAFE=y
+# CONFIG_MTD_NAND_CS553X is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_UB=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_IBM_ASM is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_IDE=m
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=m
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+CONFIG_BLK_DEV_IDEDISK=m
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+CONFIG_IDE_TASK_IOCTL=y
+# CONFIG_IDE_PROC_FS is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=m
+# CONFIG_BLK_DEV_CMD640 is not set
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_ONLYDISK=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_CS5535 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_PIIX=m
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_IFB=m
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=m
+# CONFIG_PCNET32_NAPI is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+CONFIG_NE2K_PCI=m
+CONFIG_8139CP=m
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_AIRO is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_PRISM54_USB is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_BCM43XX is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_ACX_PCI is not set
+# CONFIG_ACX_USB is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET_MII=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+CONFIG_NETCONSOLE=m
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+# CONFIG_MOUSE_PS2_ALPS is not set
+# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_PS2_LIFEBOOK is not set
+# CONFIG_MOUSE_PS2_TRACKPOINT is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_PS2_OLPC=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PCSPKR=m
+# CONFIG_INPUT_WISTRON_BTNS is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
+# CONFIG_ALIM1535_WDT is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_SC520_WDT is not set
+# CONFIG_EUROTECH_WDT is not set
+# CONFIG_IB700_WDT is not set
+# CONFIG_IBMASR is not set
+# CONFIG_WAFER_WDT is not set
+# CONFIG_I6300ESB_WDT is not set
+# CONFIG_ITCO_WDT is not set
+# CONFIG_SC1200_WDT is not set
+# CONFIG_PC87413_WDT is not set
+# CONFIG_60XX_WDT is not set
+# CONFIG_SBC8360_WDT is not set
+# CONFIG_CPU5_WDT is not set
+# CONFIG_SMSC37B787_WDT is not set
+# CONFIG_W83627HF_WDT is not set
+# CONFIG_W83697HF_WDT is not set
+# CONFIG_W83877F_WDT is not set
+# CONFIG_W83977F_WDT is not set
+# CONFIG_MACHZ_WDT is not set
+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_INTEL is not set
+# CONFIG_HW_RANDOM_AMD is not set
+CONFIG_HW_RANDOM_GEODE=y
+# CONFIG_HW_RANDOM_VIA is not set
+CONFIG_NVRAM=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_SONYPI is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_MWAVE is not set
+# CONFIG_PC8736x_GPIO is not set
+# CONFIG_NSC_GPIO is not set
+CONFIG_CS5535_GPIO=m
+# CONFIG_RAW_DRIVER is not set
+CONFIG_HANGCHECK_TIMER=m
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+CONFIG_SCx200_ACB=y
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+CONFIG_BATTERY_OLPC=y
+# CONFIG_HWMON is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=y
+# CONFIG_VIDEO_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_OV7670=y
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_CX88 is not set
+CONFIG_VIDEO_CAFE_CCIC=y
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_ZR364XX is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_PROGEAR is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+CONFIG_VGASTATE=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+CONFIG_FB_VESA=y
+# CONFIG_FB_HECUBA is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_I810 is not set
+# CONFIG_FB_LE80578 is not set
+# CONFIG_FB_INTEL is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=y
+CONFIG_FB_GEODE_GX=y
+# CONFIG_FB_GEODE_GX1 is not set
+CONFIG_FB_OLPC_DCON=y
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_VIDEO_SELECT=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+CONFIG_FONT_SUN12x22=y
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+# CONFIG_SND_SERIAL_U16550 is not set
+CONFIG_SND_MPU401=m
+
+#
+# PCI devices
+#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+CONFIG_SND_CS5535AUDIO=y
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+CONFIG_SND_INTEL8X0=m
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_AC97_POWER_SAVE=y
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_USX2Y=m
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+CONFIG_USB_PERSIST=y
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_SPLIT_ISO=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+# CONFIG_USB_STORAGE_KARMA is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+CONFIG_USB_SERIAL_CP2101=m
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_WBSD is not set
+# CONFIG_MMC_TIFM_SD is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+# CONFIG_EDAC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Virtualization
+#
+# CONFIG_KVM is not set
+
+#
+# Sysprof
+#
+CONFIG_SYSPROF=m
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_FS_XIP=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_PROMFS_FS=y
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+# CONFIG_JFFS2_FS_POSIX_ACL is not set
+CONFIG_JFFS2_FS_SECURITY=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_RPCSEC_GSS_SPKM3=m
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Instrumentation Support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_LIST=y
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+
+#
+# Page alloc debug is incompatible with Software Suspend on i386
+#
+CONFIG_DEBUG_RODATA=y
+CONFIG_4KSTACKS=y
+CONFIG_DOUBLEFAULT=y
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
+# CONFIG_SECURITY_SELINUX_DISABLE is not set
+CONFIG_SECURITY_SELINUX_DEVELOP=y
+CONFIG_SECURITY_SELINUX_AVC_STATS=y
+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
+# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
+# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+# CONFIG_CRYPTO_TWOFISH_586 is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_AES_586=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+# CONFIG_CRYPTO_DEV_PADLOCK is not set
+CONFIG_CRYPTO_DEV_GEODE=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_REED_SOLOMON=y
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_X86_BIOS_REBOOT=y
+CONFIG_KTIME_SCALAR=y
diff --git a/arch/i386/configs/xs_defconfig b/arch/i386/configs/xs_defconfig
new file mode 100644
index 0000000..b937de5
--- /dev/null
+++ b/arch/i386/configs/xs_defconfig
@@ -0,0 +1,2221 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc5
+# Wed Jun 20 08:26:53 2007
+#
+CONFIG_X86_32=y
+CONFIG_GENERIC_TIME=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_X86=y
+CONFIG_MMU=y
+CONFIG_ZONE_DMA=y
+CONFIG_QUICKLIST=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_DMI=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# Processor type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_SMP is not set
+CONFIG_X86_PC=y
+# CONFIG_X86_ELAN is not set
+# CONFIG_X86_VOYAGER is not set
+# CONFIG_X86_NUMAQ is not set
+# CONFIG_X86_SUMMIT is not set
+# CONFIG_X86_BIGSMP is not set
+# CONFIG_X86_VISWS is not set
+# CONFIG_X86_GENERICARCH is not set
+# CONFIG_X86_ES7000 is not set
+# CONFIG_PARAVIRT is not set
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP2 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MGEODEGX1 is not set
+CONFIG_MGEODE_LX=y
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_X86_GENERIC is not set
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=5
+CONFIG_X86_XADD=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y
+CONFIG_X86_USE_3DNOW=y
+CONFIG_X86_TSC=y
+CONFIG_X86_MINIMUM_CPU_MODEL=4
+# CONFIG_HPET_TIMER is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_BKL=y
+# CONFIG_X86_UP_APIC is not set
+# CONFIG_X86_MCE is not set
+# CONFIG_VM86 is not set
+# CONFIG_TOSHIBA is not set
+# CONFIG_I8K is not set
+CONFIG_X86_REBOOTFIXUPS=y
+# CONFIG_MICROCODE is not set
+CONFIG_X86_MSR=y
+CONFIG_X86_CPUID=m
+
+#
+# Firmware Drivers
+#
+# CONFIG_EDD is not set
+# CONFIG_DELL_RBU is not set
+# CONFIG_DCDBAS is not set
+CONFIG_NOHIGHMEM=y
+# CONFIG_HIGHMEM4G is not set
+# CONFIG_HIGHMEM64G is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_3G_OPT is not set
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_2G_OPT is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_NR_QUICK=1
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_MTRR is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_VGA_NOPROBE is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+CONFIG_KEXEC=y
+CONFIG_PHYSICAL_START=0x400000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+# CONFIG_COMPAT_VDSO is not set
+
+#
+# Power management options (ACPI, APM)
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+CONFIG_PM_DEBUG=y
+# CONFIG_DISABLE_CONSOLE_SUSPEND is not set
+CONFIG_DISABLE_SUSPEND_VT_SWITCH=y
+# CONFIG_PM_TRACE is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_SOFTWARE_SUSPEND=y
+CONFIG_PM_STD_PARTITION=""
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
+# CONFIG_ACPI is not set
+# CONFIG_APM is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+# CONFIG_PCI_GOANY is not set
+CONFIG_PCI_GOOLPC=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_OLPC=y
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_DEBUG is not set
+CONFIG_ISA_DMA_API=y
+# CONFIG_ISA is not set
+# CONFIG_MCA is not set
+# CONFIG_SCx200 is not set
+CONFIG_GEODE_MFGPT_TIMER=y
+CONFIG_OLPC=y
+CONFIG_OLPC_PM=y
+CONFIG_OPEN_FIRMWARE=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+CONFIG_DEFAULT_BIC=y
+# CONFIG_DEFAULT_CUBIC is not set
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="bic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=y
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+# CONFIG_NETLABEL is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+# CONFIG_NF_CONNTRACK_MARK is not set
+# CONFIG_NF_CONNTRACK_SECMARK is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_IPRANGE is not set
+# CONFIG_IP_NF_MATCH_TOS is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_MATCH_OWNER is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+CONFIG_IP_NF_TARGET_LOG=m
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_SIP is not set
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+# CONFIG_NET_ACT_IPT is not set
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_ESTIMATOR=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+CONFIG_IEEE80211_SOFTMAC_DEBUG=y
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=m
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PNC2000 is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+# CONFIG_MTD_SBC_GXX is not set
+# CONFIG_MTD_AMD76XROM is not set
+# CONFIG_MTD_ICHXROM is not set
+# CONFIG_MTD_ESB2ROM is not set
+# CONFIG_MTD_CK804XROM is not set
+CONFIG_MTD_SCB2_FLASH=m
+# CONFIG_MTD_NETtel is not set
+# CONFIG_MTD_DILNETPC is not set
+# CONFIG_MTD_L440GX is not set
+CONFIG_MTD_PCI=m
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+# CONFIG_MTD_PMC551_BUGFIX is not set
+# CONFIG_MTD_PMC551_DEBUG is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_DISKONCHIP=m
+# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
+CONFIG_MTD_NAND_CAFE=y
+CONFIG_MTD_NAND_CS553X=y
+CONFIG_MTD_NAND_NANDSIM=m
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_UB=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_IBM_ASM is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_BLINK is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_IDE=m
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=m
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+CONFIG_BLK_DEV_IDEDISK=m
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+CONFIG_IDE_TASK_IOCTL=y
+# CONFIG_IDE_PROC_FS is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=m
+# CONFIG_BLK_DEV_CMD640 is not set
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_ONLYDISK=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_CS5535 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_PIIX=m
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Battery support
+#
+# CONFIG_BATTERY_CLASS is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_IFB=m
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+CONFIG_NE2K_PCI=m
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_AIRO is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_PRISM54_USB is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_BCM43XX is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_ACX_PCI is not set
+# CONFIG_ACX_USB is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET_MII=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+CONFIG_NETCONSOLE=m
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+# CONFIG_MOUSE_PS2_ALPS is not set
+# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_PS2_LIFEBOOK is not set
+# CONFIG_MOUSE_PS2_TRACKPOINT is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_PS2_OLPC=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PCSPKR=m
+# CONFIG_INPUT_WISTRON_BTNS is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
+# CONFIG_ALIM1535_WDT is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_SC520_WDT is not set
+# CONFIG_EUROTECH_WDT is not set
+# CONFIG_IB700_WDT is not set
+# CONFIG_IBMASR is not set
+# CONFIG_WAFER_WDT is not set
+# CONFIG_I6300ESB_WDT is not set
+# CONFIG_ITCO_WDT is not set
+# CONFIG_SC1200_WDT is not set
+# CONFIG_PC87413_WDT is not set
+# CONFIG_60XX_WDT is not set
+# CONFIG_SBC8360_WDT is not set
+# CONFIG_CPU5_WDT is not set
+# CONFIG_SMSC37B787_WDT is not set
+# CONFIG_W83627HF_WDT is not set
+# CONFIG_W83697HF_WDT is not set
+# CONFIG_W83877F_WDT is not set
+# CONFIG_W83977F_WDT is not set
+# CONFIG_MACHZ_WDT is not set
+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_INTEL is not set
+# CONFIG_HW_RANDOM_AMD is not set
+CONFIG_HW_RANDOM_GEODE=y
+# CONFIG_HW_RANDOM_VIA is not set
+CONFIG_NVRAM=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_SONYPI is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_MWAVE is not set
+# CONFIG_PC8736x_GPIO is not set
+# CONFIG_NSC_GPIO is not set
+CONFIG_CS5535_GPIO=m
+# CONFIG_RAW_DRIVER is not set
+CONFIG_HANGCHECK_TIMER=m
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+CONFIG_SCx200_ACB=y
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=m
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+CONFIG_BATTERY_OLPC=m
+# CONFIG_HWMON is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+# CONFIG_VIDEO_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_OV7670=m
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_CX88 is not set
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_ZR364XX is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_PROGEAR is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+CONFIG_VGASTATE=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+CONFIG_FB_VESA=y
+# CONFIG_FB_HECUBA is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_I810 is not set
+# CONFIG_FB_LE80578 is not set
+# CONFIG_FB_INTEL is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=y
+CONFIG_FB_GEODE_GX=y
+# CONFIG_FB_GEODE_GX1 is not set
+CONFIG_FB_OLPC_DCON=y
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_VIDEO_SELECT=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+CONFIG_FONT_SUN12x22=y
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+# CONFIG_SND_SERIAL_U16550 is not set
+CONFIG_SND_MPU401=m
+
+#
+# PCI devices
+#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+CONFIG_SND_CS5535AUDIO=m
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+CONFIG_SND_ENS1370=m
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_AC97_POWER_SAVE=y
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_USX2Y=m
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+CONFIG_USB_PERSIST=y
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_SPLIT_ISO=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+# CONFIG_USB_STORAGE_KARMA is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+CONFIG_USB_SERIAL_CP2101=m
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_WBSD is not set
+# CONFIG_MMC_TIFM_SD is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_OLPC=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+# CONFIG_EDAC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Virtualization
+#
+# CONFIG_KVM is not set
+
+#
+# Sysprof
+#
+CONFIG_SYSPROF=m
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_FS_XIP=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_PROMFS_FS=y
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_RPCSEC_GSS_SPKM3=m
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Instrumentation Support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_LIST=y
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+
+#
+# Page alloc debug is incompatible with Software Suspend on i386
+#
+CONFIG_DEBUG_RODATA=y
+CONFIG_4KSTACKS=y
+CONFIG_DOUBLEFAULT=y
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
+# CONFIG_SECURITY_SELINUX_DISABLE is not set
+CONFIG_SECURITY_SELINUX_DEVELOP=y
+CONFIG_SECURITY_SELINUX_AVC_STATS=y
+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
+# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
+# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+# CONFIG_CRYPTO_TWOFISH_586 is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_AES_586=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+# CONFIG_CRYPTO_DEV_PADLOCK is not set
+CONFIG_CRYPTO_DEV_GEODE=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_REED_SOLOMON=y
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_X86_BIOS_REBOOT=y
+CONFIG_KTIME_SCALAR=y
diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile
index 9d33b00..2e2cf42 100644
--- a/arch/i386/kernel/Makefile
+++ b/arch/i386/kernel/Makefile
@@ -39,13 +39,17 @@ obj-$(CONFIG_VM86)		+= vm86.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_HPET_TIMER) 	+= hpet.o
 obj-$(CONFIG_K8_NB)		+= k8.o
-obj-$(CONFIG_MGEODE_LX)		+= geode.o
+obj-$(CONFIG_MGEODE_LX)		+= geode.o mfgpt.o
 
 obj-$(CONFIG_VMI)		+= vmi.o vmiclock.o
 obj-$(CONFIG_PARAVIRT)		+= paravirt.o
 obj-y				+= pcspeaker.o
 
 obj-$(CONFIG_SCx200)		+= scx200.o
+obj-$(CONFIG_OLPC)		+= olpc.o
+obj-$(CONFIG_OLPC_PM)		+= olpc-pm.o olpc-wakeup.o
+obj-$(CONFIG_OPEN_FIRMWARE)	+= ofw.o
+obj-$(CONFIG_PROMFS_FS)		+= prom.o
 
 # vsyscall.o contains the vsyscall DSO images as __initdata.
 # We must build both images before we can assemble it.
diff --git a/arch/i386/kernel/geode.c b/arch/i386/kernel/geode.c
index 41e8aec..637e301 100644
--- a/arch/i386/kernel/geode.c
+++ b/arch/i386/kernel/geode.c
@@ -145,10 +145,14 @@ EXPORT_SYMBOL_GPL(geode_gpio_setup_event);
 
 static int __init geode_southbridge_init(void)
 {
+	int timers;
+
 	if (!is_geode())
 		return -ENODEV;
 
 	init_lbars();
+	timers = geode_mfgpt_detect();
+	printk(KERN_INFO "geode-mfgpt:  %d timers available.\n", timers);
 	return 0;
 }
 
diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S
index 8f03821..3176280 100644
--- a/arch/i386/kernel/head.S
+++ b/arch/i386/kernel/head.S
@@ -117,8 +117,34 @@ ENTRY(startup_32)
 	movl $(COMMAND_LINE_SIZE/4),%ecx
 	rep
 	movsl
+
+#ifdef CONFIG_OPEN_FIRMWARE
+/*
+ * If Open Firmware booted us, save the OFW client interface callback address
+ * and preserve the OFW page mappings by priming the kernel's new page
+ * directory area with a copy of the OFW page directory.  That lets OFW stay
+ * resident in high memory (high in both the virtual and physical spaces)
+ * for at least long enough to copy out the device tree.
+ */
 1:
+	movl $(boot_params - __PAGE_OFFSET + OFW_INFO_OFFSET), %ebp
+	cmpl $0x2057464F, (%ebp)	/* Magic number "OFW " */
+	jne 1f
+
+	mov 0x8(%ebp), %eax	/* Save callback address */
+	mov %eax, call_firmware - __PAGE_OFFSET
 
+	/* Copy the OFW pdir into swapper_pg_dir */
+	movl %esi, %edx		/* save %esi */
+	movl $(swapper_pg_dir - __PAGE_OFFSET), %edi
+	movl %cr3, %esi		/* Source is current pg_dir base address */
+	movl $1024, %ecx	/* Number of page directory entries */
+	rep
+	movsl
+	movl %edx, %esi		/* restore %esi */
+#endif
+
+1:
 /*
  * Initialize page tables.  This creates a PDE and a set of page
  * tables, which are located immediately beyond _end.  The variable
@@ -129,6 +155,7 @@ ENTRY(startup_32)
  * Warning: don't use %esi or the stack in this code.  However, %esp
  * can be used as a GPR if you really need it...
  */
+
 page_pde_offset = (__PAGE_OFFSET >> 20);
 
 	movl $(pg0 - __PAGE_OFFSET), %edi
diff --git a/arch/i386/kernel/mfgpt.c b/arch/i386/kernel/mfgpt.c
new file mode 100644
index 0000000..2e62a41
--- /dev/null
+++ b/arch/i386/kernel/mfgpt.c
@@ -0,0 +1,354 @@
+/* Driver/API for AMD Geode Multi-Function General Purpose Timers (MFGPT)
+ *
+ * Copyright (C) 2006, Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/* The MFPGT timers on the CS5536 provide us with suitable timers to use
+ * as clock event sources - not as good as a HPET or APIC, but certainly
+ * better then the PIT.  This isn't a general purpose MFGPT driver, but
+ * a simplified one designed specifically to act as a clock event source.
+ * For full details about the MFGPT, please consult the CS5536 data sheet.
+*/
+
+/* We are using the 32Khz input clock - its the only one that has the
+ * ranges we find desirable.  The following table lists the suitable
+ * divisors and the associated hz, minimum interval
+ * and the maximum interval:
+
+   Divisor   Hz      Min Delta (S) Max Delta (S)
+    1        32000     .0005          2.048
+    2        16000      .001          4.096
+    4         8000      .002          8.192
+    8         4000      .004         16.384
+    16        2000      .008         32.768
+    32        1000      .016         65.536
+    64         500      .032        131.072
+   128         250      .064        262.144
+   256         125      .128        524.288
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <asm/geode.h>
+
+#include "do_timer.h"
+
+#define MFGPT_MAX_TIMERS 8
+
+#define F_AVAIL    0x01
+
+static struct mfgpt_timer_t {
+	int flags;
+	struct module *owner;
+} mfgpt_timers[MFGPT_MAX_TIMERS];
+
+/* Selected from the table above */
+
+#define MFGPT_DIVISOR 16
+#define MFGPT_SCALE  4     /* divisor = 2^(scale) */
+#define MFGPT_HZ  (32000 / MFGPT_DIVISOR)
+#define MFGPT_PERIODIC (MFGPT_HZ / HZ)
+
+#ifdef CONFIG_GEODE_MFGPT_TIMER
+static int __init mfgpt_timer_setup(void);
+#else
+#define mfgpt_timer_setup() (0)
+#endif
+
+/* Allow for disabling of MFGPTs */
+static int disable = 0;
+static int __init mfgpt_disable(char *s)
+{
+	disable = 1;
+	return 1;
+}
+__setup("nomfgpt", mfgpt_disable);
+
+/*
+ * Check whether any MFGPTs are available for the kernel to use.  In most
+ * cases, firmware that uses AMD's VSA code will claim all timers during
+ * bootup; we certainly don't want to take them if they're already in use.
+ * In other cases (such as with VSAless OpenFirmware), the system firmware
+ * leaves timers available for us to use.
+ */
+int __init geode_mfgpt_detect(void)
+{
+	int count = 0, i;
+	u16 val;
+
+	if (disable) {
+		printk(KERN_INFO "geode-mfgpt:  Skipping MFGPT setup\n");
+		return 0;
+	}
+
+	for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
+		val = geode_mfgpt_read(i, MFGPT_REG_SETUP);
+		if (!(val & MFGPT_SETUP_SETUP)) {
+			mfgpt_timers[i].flags = F_AVAIL;
+			count++;
+		}
+	}
+
+	/* set up clock event device, if desired */
+	i = mfgpt_timer_setup();
+
+	return count;
+}
+
+int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable)
+{
+	u32 msr, mask, value, dummy;
+	int shift = (cmp == MFGPT_CMP1) ? 0 : 8;
+
+	if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
+		return -EIO;
+
+	/*
+	 * The register maps for these are described in sections 6.17.1.x of
+	 * the AMD Geode CS5536 Companion Device Data Book.
+	 */
+	switch(event) {
+	case MFGPT_EVENT_RESET:
+		/* XXX: According to the docs, we cannot reset timers above
+		 * 6; that is, resets for 7 and 8 will be ignored.  Is this
+		 *  a problem? */
+		msr = MFGPT_NR_MSR;
+		mask = 1 << (timer + 24);
+		break;
+
+	case MFGPT_EVENT_NMI:
+		msr = MFGPT_NR_MSR;
+		mask = 1 << (timer + shift);
+		break;
+
+	case MFGPT_EVENT_IRQ:
+		msr = MFGPT_IRQ_MSR;
+		mask = 1 << (timer + shift);
+		break;
+
+	default:
+		return -EIO;
+	}
+
+	rdmsr(msr, value, dummy);
+
+	if (enable)
+		value |= mask;
+	else
+		value &= ~mask;
+
+	wrmsr(msr, value, dummy);
+	return 0;
+}
+EXPORT_SYMBOL(geode_mfgpt_toggle_event);
+
+int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable)
+{
+	u32 val, dummy;
+	int offset;
+
+	if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
+		return -EIO;
+
+	if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable))
+		return -EIO;
+
+	rdmsr(0x51400022, val, dummy);
+
+	offset = (timer % 4) * 4;
+
+	val &= ~((0xF << offset) | (0xF << (offset + 16)));
+
+	if (enable) {
+		val |= (irq & 0x0F) << (offset);
+		val |= (irq & 0x0F) << (offset + 16);
+	}
+
+	wrmsr(0x51400022, val, dummy);
+	return 0;
+}
+EXPORT_SYMBOL(geode_mfgpt_set_irq);
+
+static int mfgpt_get(int timer, struct module *owner)
+{
+	mfgpt_timers[timer].flags &= ~F_AVAIL;
+	mfgpt_timers[timer].owner = owner;
+	printk(KERN_INFO "geode-mfgpt:  Registered timer %d\n", timer);
+	return timer;
+}
+
+int geode_mfgpt_alloc_timer(int timer, int domain, struct module *owner)
+{
+	int i;
+
+	if (!geode_get_dev_base(GEODE_DEV_MFGPT))
+		return -ENODEV;
+	if (timer >= MFGPT_MAX_TIMERS)
+		return -EIO;
+
+	if (timer < 0) {
+		/* Try to find an available timer */
+		for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
+			if (mfgpt_timers[i].flags & F_AVAIL)
+				return mfgpt_get(i, owner);
+
+			if (i == 5 && domain == MFGPT_DOMAIN_WORKING)
+				break;
+		}
+	}
+	else {
+		/* If they requested a specific timer, try to honor that */
+		if (mfgpt_timers[timer].flags & F_AVAIL)
+			return mfgpt_get(timer, owner);
+	}
+
+	/* No timers available - too bad */
+	return -1;
+}
+EXPORT_SYMBOL(geode_mfgpt_alloc_timer);
+
+#ifdef CONFIG_GEODE_MFGPT_TIMER
+
+static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN;
+static u16 mfgpt_event_clock;
+
+static int irq = 7;
+static int __init mfgpt_setup(char *str)
+{
+	get_option(&str, &irq);
+	return 1;
+}
+__setup("mfgpt_irq=", mfgpt_setup);
+
+static inline void mfgpt_disable_timer(u16 clock)
+{
+	u16 val = geode_mfgpt_read(clock, MFGPT_REG_SETUP);
+	geode_mfgpt_write(clock, MFGPT_REG_SETUP, val & ~MFGPT_SETUP_CNTEN);
+}
+
+static int mfgpt_next_event(unsigned long, struct clock_event_device *);
+static void mfgpt_set_mode(enum clock_event_mode, struct clock_event_device *);
+
+static struct clock_event_device mfgpt_clockevent = {
+	.name = "mfgpt-timer",
+	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode = mfgpt_set_mode,
+	.set_next_event = mfgpt_next_event,
+	.rating = 250,
+	.cpumask = CPU_MASK_ALL,
+	.shift = 32
+};
+
+static inline void mfgpt_start_timer(u16 clock, u16 delta)
+{
+	geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_CMP2, (u16) delta);
+	geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);
+
+	geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP,
+			  MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
+}
+
+static void mfgpt_set_mode(enum clock_event_mode mode,
+			   struct clock_event_device *evt)
+{
+	mfgpt_disable_timer(mfgpt_event_clock);
+
+	if (mode == CLOCK_EVT_MODE_PERIODIC)
+		mfgpt_start_timer(mfgpt_event_clock, MFGPT_PERIODIC);
+
+	mfgpt_tick_mode = mode;
+}
+
+static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt)
+{
+	mfgpt_start_timer(mfgpt_event_clock, delta);
+	return 0;
+}
+
+/* Assume (foolishly?), that this interrupt was due to our tick */
+
+static irqreturn_t mfgpt_tick(int irq, void *dev_id)
+{
+	if (mfgpt_tick_mode == CLOCK_EVT_MODE_SHUTDOWN)
+		return IRQ_HANDLED;
+
+	/* Turn off the clock */
+	mfgpt_disable_timer(mfgpt_event_clock);
+
+	/* Clear the counter */
+	geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);
+
+	/* Restart the clock in periodic mode */
+
+	if (mfgpt_tick_mode == CLOCK_EVT_MODE_PERIODIC) {
+		geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP,
+				  MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
+	}
+
+	mfgpt_clockevent.event_handler(&mfgpt_clockevent);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction mfgptirq  = {
+	.handler = mfgpt_tick,
+	.flags = IRQF_DISABLED | IRQF_NOBALANCING,
+	.mask = CPU_MASK_NONE,
+	.name = "mfgpt-timer"
+};
+
+static int __init mfgpt_timer_setup(void)
+{
+	int timer, ret;
+	u16 val;
+
+	timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING, THIS_MODULE);
+	if (timer < 0) {
+		printk(KERN_ERR "mfgpt-timer:  Could not allocate a MFPGT timer\n");
+		return -ENODEV;
+	}
+
+	mfgpt_event_clock = timer;
+	/* Set the clock scale and enable the event mode for CMP2 */
+	val = MFGPT_SCALE | (3 << 8);
+
+	geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, val);
+
+	/* Set up the IRQ on the MFGPT side */
+	if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, irq)) {
+		printk(KERN_ERR "mfgpt-timer:  Could not set up IRQ %d\n", irq);
+		return -EIO;
+	}
+
+	/* And register it with the kernel */
+        ret = setup_irq(irq, &mfgptirq);
+
+	if (ret) {
+		printk(KERN_ERR "mfgpt-timer:  Unable to set up the interrupt.\n");
+		goto err;
+	}
+
+	/* Set up the clock event */
+	mfgpt_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC, 32);
+	mfgpt_clockevent.min_delta_ns = clockevent_delta2ns(0xF, &mfgpt_clockevent);
+	mfgpt_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE, &mfgpt_clockevent);
+
+	printk("mfgpt-timer:  registering the MFGT timer as a clock event.\n");
+	clockevents_register_device(&mfgpt_clockevent);
+
+	return 0;
+
+err:
+	geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, irq);
+	printk(KERN_ERR "mfgpt-timer:  Unable to set up the MFGPT clock source\n");
+	return -EIO;
+}
+
+#endif
diff --git a/arch/i386/kernel/ofw.c b/arch/i386/kernel/ofw.c
new file mode 100644
index 0000000..fdcd936
--- /dev/null
+++ b/arch/i386/kernel/ofw.c
@@ -0,0 +1,100 @@
+/*
+ * ofw.c - Open Firmware client interface for 32-bit systems.
+ * This code is intended to be portable to any 32-bit Open Firmware
+ * implementation with a standard client interface that can be
+ * called when Linux is running.
+ *
+ * Copyright (C) 2007  Mitch Bradley <wmb@firmworks.com>
+ * Copyright (C) 2007  Andres Salomon <dilinger@debian.org>
+ */
+
+#include <stdarg.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <asm/ofw.h>
+
+
+int (*call_firmware)(int *);
+
+static DEFINE_SPINLOCK(prom_lock);
+
+#define MAXARGS 20
+
+/*
+ * The return value from ofw() in all cases is 0 if the attempt to call the
+ * function succeeded, <0 otherwise.  That return value is from the
+ * gateway function only.  Any results from the called function are returned
+ * via output argument pointers. 
+ *
+ * Here are call templates for all the standard OFW client services:
+ *
+ * ofw("test", 1, 1, namestr, &missing);
+ * ofw("peer", 1, 1, phandle, &sibling_phandle);
+ * ofw("child", 1, 1, phandle, &child_phandle);
+ * ofw("parent", 1, 1, phandle, &parent_phandle);
+ * ofw("instance_to_package", 1, 1, ihandle, &phandle);
+ * ofw("getproplen", 2, 1, phandle, namestr, &proplen);
+ * ofw("getprop", 4, 1, phandle, namestr, bufaddr, buflen, &size);
+ * ofw("nextprop", 3, 1, phandle, previousstr, bufaddr, &flag);
+ * ofw("setprop", 4, 1, phandle, namestr, bufaddr, len, &size);
+ * ofw("canon", 3, 1, devspecstr, bufaddr, buflen, &length);
+ * ofw("finddevice", 1, 1, devspecstr, &phandle);
+ * ofw("instance-to-path", 3, 1, ihandle, bufaddr, buflen, &length);
+ * ofw("package-to-path", 3, 1, phandle, bufaddr, buflen, &length);
+ * ofw("call_method", numin, numout, in0, in1, ..., &out0, &out1, ...);
+ * ofw("open", 1, 1, devspecstr, &ihandle);
+ * ofw("close", 1, 0, ihandle);
+ * ofw("read", 3, 1, ihandle, addr, len, &actual);
+ * ofw("write", 3, 1, ihandle, addr, len, &actual);
+ * ofw("seek", 3, 1, ihandle, pos_hi, pos_lo, &status);
+ * ofw("claim", 3, 1, virtaddr, size, align, &baseaddr);
+ * ofw("release", 2, 0, virtaddr, size);
+ * ofw("boot", 1, 0, bootspecstr);
+ * ofw("enter", 0, 0);
+ * ofw("exit", 0, 0);
+ * ofw("chain", 5, 0, virtaddr, size, entryaddr, argsaddr, len);
+ * ofw("interpret", numin+1, numout+1, cmdstr, in0, ..., &catchres, &out0, ...);
+ * ofw("set-callback", 1, 1, newfuncaddr, &oldfuncaddr);
+ * ofw("set-symbol-lookup", 2, 0, symtovaladdr, valtosymaddr);
+ * ofw("milliseconds", 0, 1, &ms);
+ */
+
+int ofw(char *name, int numargs, int numres, ...)
+{
+	va_list ap;
+	int argarray[MAXARGS+3];
+	int argnum = 3;
+	int retval;
+	int *intp;
+	unsigned long flags;
+
+	if (!call_firmware)
+		return -1;
+	if ((numargs + numres) > MAXARGS)
+		return -1;	/* spit out an error? */
+
+	argarray[0] = (int) name;
+	argarray[1] = numargs;
+	argarray[2] = numres;
+
+	va_start(ap, numres);
+	while (numargs) {
+		argarray[argnum++] = va_arg(ap, int);
+		numargs--;
+	}
+
+	spin_lock_irqsave(&prom_lock, flags);
+	retval = call_firmware(argarray);
+	spin_unlock_irqrestore(&prom_lock, flags);
+
+	if (retval == 0) {
+		while (numres) {
+			intp = va_arg(ap, int *);
+			*intp = argarray[argnum++];
+			numres--;
+		}
+	}
+	va_end(ap);
+	return retval;
+}
+EXPORT_SYMBOL(ofw);
diff --git a/arch/i386/kernel/olpc-pm.c b/arch/i386/kernel/olpc-pm.c
new file mode 100644
index 0000000..93149f1
--- /dev/null
+++ b/arch/i386/kernel/olpc-pm.c
@@ -0,0 +1,785 @@
+/* olpc-pm.c
+ * © 2006 Red Hat, Inc.
+ * Portions also copyright 2006 Advanced Micro Devices, Inc.
+ * GPLv2
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/suspend.h>
+#include <linux/bootmem.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/mc146818rtc.h>
+#include <asm/io.h>
+
+#include <asm/olpc.h>
+
+/* A few words about accessing the ACPI and PM registers.  Long story short,
+   byte and word accesses of the ACPI and PM registers is broken.  The only
+   way to do it really correctly is to use dword accesses, which we do
+   throughout this code.  For more details, please consult Eratta 17 and 18
+   here:
+
+   http://www.amd.com/files/connectivitysolutions/geode/geode_gx/34472D_CS5536_B1_specupdate.pdf
+*/
+
+#define PM_IRQ 3
+
+#define CS5536_PM_PWRBTN (1 << 8)
+#define CS5536_PM_RTC    (1 << 10)
+
+#define GPIO_WAKEUP_EC (1 << 31)
+#define GPIO_WAKEUP_LID (1 << 30)
+
+#define PM_MODE_NORMAL 0
+#define PM_MODE_TEST   1
+#define PM_MODE_MAX    2
+
+/* These, and the battery EC commands, should be in an olpc.h. */
+#define EC_WRITE_SCI_MASK 0x1b
+#define EC_READ_SCI_MASK  0x1c
+
+extern void do_olpc_suspend_lowlevel(void);
+
+static struct {
+	unsigned long address;
+	unsigned short segment;
+} ofw_bios_entry = { 0, __KERNEL_CS };
+
+static int olpc_pm_mode = PM_MODE_NORMAL;
+static unsigned long acpi_base;
+static unsigned long pms_base;
+static int sci_irq;
+static int olpc_lid_flag;
+
+static struct input_dev *pm_inputdev;
+static struct input_dev *lid_inputdev;
+static struct input_dev *ebook_inputdev;
+static struct pm_ops olpc_pm_ops;
+
+static int gpio_wake_events = 0;
+static int ebook_state = -1;
+static u16 olpc_wakeup_mask = 0;
+
+struct platform_device olpc_powerbutton_dev = {
+	.name = "powerbutton",
+	.id = -1,
+};
+
+struct platform_device olpc_lid_dev = {
+	.name = "lid",
+	.id = -1,
+};
+
+static void __init init_ebook_state(void)
+{
+	if (olpc_ec_cmd(0x2a, NULL, 0, (unsigned char *) &ebook_state, 1)) {
+		printk(KERN_WARNING "olpc-pm:  failed to get EBOOK state!\n");
+		ebook_state = 0;
+	}
+	ebook_state &= 1;
+
+	/* the input layer needs to know what value to default to as well */
+	input_report_switch(ebook_inputdev, SW_TABLET_MODE, ebook_state);
+	input_sync(ebook_inputdev);
+}
+
+static void (*battery_callback)(unsigned long);
+static DEFINE_SPINLOCK(battery_callback_lock);
+
+/* propagate_events is non-NULL if run from workqueue,
+   NULL when called at init time to flush SCI queue */
+static void process_sci_queue(struct work_struct *propagate_events)
+{
+	unsigned char data = 0;
+	unsigned char battery_events = 0;
+	int ret;
+
+	do {
+		ret = olpc_ec_cmd(0x84, NULL, 0, &data, 1);
+		if (!ret) {
+			printk(KERN_DEBUG "olpc-pm:  SCI 0x%x received\n",
+					data);
+
+			switch (data) {
+			case EC_SCI_SRC_EMPTY:
+			case EC_SCI_SRC_GAME:
+			case EC_SCI_SRC_WLAN:
+				/* we ignore these for now */
+				break;
+			case EC_SCI_SRC_BATERR:
+				printk(KERN_ERR "olpc-pm:  Battery Management System detected an error!  Remove turnip from battery slot.\n");
+			case EC_SCI_SRC_BATSOC:
+			case EC_SCI_SRC_BATTERY:
+			case EC_SCI_SRC_ACPWR:
+				battery_events |= data;
+				break;
+			case EC_SCI_SRC_EBOOK:
+				ebook_state = !ebook_state;
+				if (propagate_events) {
+					input_report_switch(ebook_inputdev,
+						SW_TABLET_MODE, ebook_state);
+					input_sync(ebook_inputdev);
+				}
+				break;
+			default:
+				printk(KERN_ERR "olpc-pm:  Unknown SCI event 0x%x occurred!\n", data);
+			}
+		}
+	} while (data && !ret);
+
+	if (battery_events && battery_callback && propagate_events) {
+		void (*cbk)(unsigned long);
+		
+		/* Older EC versions didn't distinguish between AC and battery
+		   events */
+		if (olpc_platform_info.ecver < 0x45)
+			battery_events = EC_SCI_SRC_BATTERY | EC_SCI_SRC_ACPWR;
+
+		spin_lock(&battery_callback_lock);
+		cbk = battery_callback;
+		spin_unlock(&battery_callback_lock);
+
+		cbk(battery_events);
+	}
+
+	if (ret)
+		printk(KERN_WARNING "Failed to clear SCI queue!\n");
+}
+
+static DECLARE_WORK(sci_work, process_sci_queue);
+
+void olpc_register_battery_callback(void (*f)(unsigned long))
+{
+	spin_lock(&battery_callback_lock);
+	battery_callback = f;
+	spin_unlock(&battery_callback_lock);
+}
+EXPORT_SYMBOL_GPL(olpc_register_battery_callback);
+
+void olpc_deregister_battery_callback(void)
+{
+	spin_lock(&battery_callback_lock);
+	battery_callback = NULL;
+	spin_unlock(&battery_callback_lock);
+	cancel_work_sync(&sci_work);
+}
+EXPORT_SYMBOL_GPL(olpc_deregister_battery_callback);
+
+
+static int olpc_pm_interrupt(int irq, void *id)
+{
+	uint32_t sts, gpe = 0;
+
+	sts = inl(acpi_base + PM1_STS);
+	outl(sts | 0xFFFF, acpi_base + PM1_STS);
+
+	if (olpc_get_rev() >= OLPC_REV_B2) {
+		gpe = inl(acpi_base + PM_GPE0_STS);
+		outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS);
+	}
+
+	if (sts & CS5536_PM_PWRBTN) {
+		input_report_key(pm_inputdev, KEY_POWER, 1);
+		input_sync(pm_inputdev);
+		printk(KERN_DEBUG "olpm-pm:  PM_PWRBTN event received\n");
+		/* Do we need to delay this (and hence schedule_work)? */
+		input_report_key(pm_inputdev, KEY_POWER, 0);
+		input_sync(pm_inputdev);
+	}
+
+	if (gpe & GPIO_WAKEUP_EC) {
+		geode_gpio_clear(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS);
+		schedule_work(&sci_work);
+	}
+
+	if (gpe & GPIO_WAKEUP_LID) {
+		/* Disable events */
+		geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
+			
+		/* Clear the edge */
+			
+		if (olpc_lid_flag)
+			geode_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
+		else
+			geode_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
+
+		/* Clear the status too */
+		geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS);
+		geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS);
+
+		/* The line is high when the LID is open, but SW_LID
+		 * should be high when the LID is closed, so we pass the old
+		 * value of olpc_lid_flag
+		 */
+
+		input_report_switch(lid_inputdev, SW_LID, olpc_lid_flag);
+		input_sync(lid_inputdev);
+
+		/* Swap the status */
+		olpc_lid_flag = !olpc_lid_flag;
+
+		if (olpc_lid_flag)
+			geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
+		else
+			geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
+
+		/* re-enable the event */
+		geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * For now, only support STR.  We also don't support suspending on
+ * B1s, due to difficulties with the cafe FPGA.
+ */
+static int olpc_pm_state_valid(suspend_state_t pm_state)
+{
+        if (pm_state == PM_SUSPEND_MEM && olpc_rev_after(OLPC_REV_B1))
+                return 1;
+
+        return 0;
+}
+
+/* This is a catchall function for operations that just don't belong
+ * anywhere else.  Later we will evaluate if these belong in the
+ * individual device drivers or the firmware.
+ * If you add something to this function, please explain yourself with
+ * a comment.
+ */
+
+extern void gxfb_flatpanel_control(int state);
+
+static u32 gpio_wakeup[2];
+static u64 irq_sources[4];
+static u64 mfgpt_irq_msr, mfgpt_nr_msr;
+
+void olpc_fixup_wakeup(void)
+{
+	u32 base = geode_gpio_base();
+	int i;
+
+	/* This clears any pending events from the status register -
+	 * the firmware also does this, but its possible that it tries
+	 * it too early before the key has a chance to debounce
+	 */
+
+	outl((CS5536_PM_PWRBTN << 16) | 0xFFFF, acpi_base + PM1_STS);
+
+	/* Enable the flatpanel sequencing as early as possible, because
+	   it takes ~64ms to resume.  This probably belongs in the firmware */
+
+	//gxfb_flatpanel_control(1);
+
+	/* Restore the interrupt sources */
+	wrmsrl(MSR_PIC_YSEL_LOW, irq_sources[0]);
+	wrmsrl(MSR_PIC_ZSEL_LOW, irq_sources[1]);
+	wrmsrl(MSR_PIC_YSEL_HIGH, irq_sources[2]);
+	wrmsrl(MSR_PIC_ZSEL_HIGH, irq_sources[3]);
+
+	/* Restore the X and Y sources for GPIO */
+	outl(gpio_wakeup[0], base + GPIO_MAP_X);
+	outl(gpio_wakeup[1], base + GPIO_MAP_Y);
+
+	/* Resture the MFGPT MSRs */
+	wrmsrl(MFGPT_IRQ_MSR, mfgpt_irq_msr);
+	wrmsrl(MFGPT_NR_MSR, mfgpt_nr_msr);
+	
+	for (i=0;i<2;i++) {
+		/* tell the wireless module to restart USB communication */
+		olpc_ec_cmd(0x24, NULL, 0, NULL, 0);
+	}
+}
+
+void olpc_fixup_sleep(void)
+{
+	u32 base = geode_gpio_base();
+	int i;
+
+	/* Save the X and Y sources for GPIO */
+	gpio_wakeup[0] = inl(base + GPIO_MAP_X);
+	gpio_wakeup[1] = inl(base + GPIO_MAP_Y);
+
+	/* Save the Y and Z  unrestricted sources */
+
+	rdmsrl(MSR_PIC_YSEL_LOW, irq_sources[0]);
+	rdmsrl(MSR_PIC_ZSEL_LOW, irq_sources[1]);
+	rdmsrl(MSR_PIC_YSEL_HIGH, irq_sources[2]);
+	rdmsrl(MSR_PIC_ZSEL_HIGH, irq_sources[3]);
+
+	/* Turn off the MFGPT timers on the way down */
+
+	for(i = 0; i < 8; i++) {
+		u32 val = geode_mfgpt_read(i, MFGPT_REG_SETUP);
+
+		if (val & MFGPT_SETUP_SETUP) {
+			val &= ~MFGPT_SETUP_CNTEN;
+			geode_mfgpt_write(i, MFGPT_REG_SETUP, val);
+		}
+	}
+
+	/* Save the MFGPT MSRs */
+	rdmsrl(MFGPT_IRQ_MSR, mfgpt_irq_msr);
+	rdmsrl(MFGPT_NR_MSR, mfgpt_nr_msr);
+
+	if (device_may_wakeup(&olpc_powerbutton_dev.dev))
+		olpc_wakeup_mask |= CS5536_PM_PWRBTN;
+	else
+		olpc_wakeup_mask &= ~(CS5536_PM_PWRBTN);
+
+	if (device_may_wakeup(&olpc_lid_dev.dev)) {
+		geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
+		gpio_wake_events |= GPIO_WAKEUP_LID;
+	} else {
+		geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
+		gpio_wake_events &= ~(GPIO_WAKEUP_LID);
+	}
+}
+
+static int olpc_pm_enter(suspend_state_t pm_state)
+{
+        /* Only STR is supported */
+        if (pm_state != PM_SUSPEND_MEM)
+                return -EINVAL;
+
+	olpc_fixup_sleep();
+
+	/* Set the GPIO wakeup bits */
+	outl(gpio_wake_events, acpi_base + PM_GPE0_EN);
+	outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS);
+
+        /* Save CPU state */
+        do_olpc_suspend_lowlevel();
+
+	olpc_fixup_wakeup();
+
+	/* Restore the SCI wakeup events */
+	outl(gpio_wake_events, acpi_base + PM_GPE0_EN);
+
+	return 0;
+}
+
+int asmlinkage olpc_do_sleep(u8 sleep_state)
+{
+	void *pgd_addr = __va(read_cr3());
+	printk(KERN_ERR "olpc_do_sleep!\n"); /* this needs to remain here so
+					      * that gcc doesn't optimize
+					      * away our __va! */
+	/* FIXME: Set the SCI bits we want to wake up on here */
+
+	/* FIXME:  Set any other SCI events that we might want here */
+
+	outl((olpc_wakeup_mask << 16) | 0xFFFF, acpi_base + PM1_STS);
+
+	/* If we are in test mode, then just return (simulate a successful
+	   suspend/resume).  Otherwise, if we are doing the real thing,
+	   then go for the gusto */
+
+ 	if (olpc_pm_mode != PM_MODE_TEST) {
+		__asm__ __volatile__("movl %0,%%eax" : : "r" (pgd_addr));
+		__asm__("call *(%%edi); cld"
+			: : "D" (&ofw_bios_entry));
+	}
+
+	return 0;
+}
+
+/* This code will slowly disappear as we fixup the issues in the BIOS */
+
+static void __init olpc_fixup_bios(void)
+{
+	unsigned long hi, lo;
+
+	if (olpc_has_vsa()) {
+		/* The VSA aggressively sets up the ACPI and PM register for
+		 * trapping - its not enough to force these values in the BIOS -
+		 * they seem to be changed during PCI init as well.
+		 */
+
+		/* Change the PM registers to decode to the DD */
+
+		rdmsr(0x510100e2, lo, hi);
+		hi |= 0x80000000;
+		wrmsr(0x510100e2, lo, hi);
+
+		/* Change the ACPI registers to decode to the DD */
+
+		rdmsr(0x510100e3, lo, hi);
+		hi |= 0x80000000;
+		wrmsr(0x510100e3, lo, hi);
+	}
+
+	/* GPIO24 controls WORK_AUX */
+
+	geode_gpio_set(OLPC_GPIO_WORKAUX, GPIO_OUTPUT_ENABLE);
+	geode_gpio_set(OLPC_GPIO_WORKAUX, GPIO_OUTPUT_AUX1);
+
+	if (olpc_get_rev() >= OLPC_REV_B2) {
+		/* GPIO10 is connected to the thermal alarm */
+		geode_gpio_set(OLPC_GPIO_THRM_ALRM, GPIO_INPUT_ENABLE);
+		geode_gpio_set(OLPC_GPIO_THRM_ALRM, GPIO_INPUT_AUX1);
+
+		/* Set up to get LID events */
+		geode_gpio_set(OLPC_GPIO_LID, GPIO_INPUT_ENABLE);
+
+		/* Clear edge detection and event enable for now */
+		geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
+		geode_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
+		geode_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
+
+		geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS);
+		geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS);
+
+		/* Set the LID to cause an PME event on group 6 */
+		geode_gpio_event_pme(OLPC_GPIO_LID, 6);
+
+		/* Set PME group 6 to fire the SCI interrupt */
+		geode_gpio_set_irq(6, sci_irq);
+	}
+
+	geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_INPUT_ENABLE);
+
+	/* Clear pending events */
+
+	geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS);
+	geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_POSITIVE_EDGE_STS);
+
+	//geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_EN);
+	geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_EVENTS_ENABLE);
+
+	/* Set the SCI to cause a PME event on group 7 */
+	geode_gpio_event_pme(OLPC_GPIO_ECSCI, 7);
+
+	/* And have group 6 also fire the SCI interrupt */
+	geode_gpio_set_irq(7, sci_irq);
+}
+
+/* This provides a control file for setting up testing of the
+   power management system.  For now, there is just one setting:
+   "test" which means that we don't actually enter the power
+   off routine.
+*/
+
+static const char * const pm_states[] = {
+	[PM_MODE_NORMAL]  = "normal",
+	[PM_MODE_TEST]    = "test",
+};
+
+extern struct mutex pm_mutex;
+extern struct kset power_subsys;
+
+static ssize_t control_show(struct kset *s, char *buf)
+{
+	return sprintf(buf, "%s\n", pm_states[olpc_pm_mode]);
+}
+
+static ssize_t control_store(struct kset *s, const char *buf, size_t n)
+{
+	int i, len;
+	char *p;
+
+	p = memchr(buf, '\n', n);
+	len = p ? p - buf : n;
+
+	/* Grab the mutex */
+	mutex_lock(&pm_mutex);
+	
+	for(i = 0; i < PM_MODE_MAX; i++) {
+		if (!strncmp(buf, pm_states[i], len)) {
+			olpc_pm_mode = i;
+			break;
+		}
+	}
+
+	mutex_unlock(&pm_mutex);
+
+	return (i == PM_MODE_MAX) ? -EINVAL : n;
+}
+       
+static struct subsys_attribute control_attr = {
+	.attr = {
+		.name = "olpc-pm",
+		.mode = 0644,
+	},
+	.show = control_show,
+	.store = control_store,
+};
+
+static struct attribute * olpc_attributes[] = {
+	&control_attr.attr,
+	NULL
+};
+
+static struct attribute_group olpc_attrs = {
+	.attrs = olpc_attributes,
+};
+
+static int __init alloc_inputdevs(void)
+{
+	int ret = -ENOMEM;
+
+	pm_inputdev = input_allocate_device();
+	if (!pm_inputdev)
+		goto err;
+
+	pm_inputdev->name = "OLPC PM";
+	pm_inputdev->phys = "olpc_pm/input0";
+	set_bit(EV_KEY, pm_inputdev->evbit);
+	set_bit(KEY_POWER, pm_inputdev->keybit);
+
+	ret = input_register_device(pm_inputdev);
+	if (ret) {
+		printk(KERN_ERR "olpc-pm:  failed to register PM input device: %d\n", ret);
+		goto err;
+	}
+
+	lid_inputdev = input_allocate_device();
+	if (!lid_inputdev)
+		goto err;
+
+	lid_inputdev->name = "OLPC lid switch";
+	lid_inputdev->phys = "olpc_pm/input1";
+	set_bit(EV_SW, lid_inputdev->evbit);
+	set_bit(SW_LID, lid_inputdev->swbit);
+
+	ret = input_register_device(lid_inputdev);
+	if (ret) {
+		printk(KERN_ERR "olpc-pm:  failed to register lid input device: %d\n", ret);
+		goto err;
+	}
+
+	ebook_inputdev = input_allocate_device();
+	if (!ebook_inputdev)
+		goto err;
+
+	ebook_inputdev->name = "OLPC ebook switch";
+	ebook_inputdev->phys = "olpc_pm/input2";
+	set_bit(EV_SW, ebook_inputdev->evbit);
+	set_bit(SW_TABLET_MODE, ebook_inputdev->swbit);
+
+	ret = input_register_device(ebook_inputdev);
+	if (ret) {
+		printk(KERN_ERR "olpc-pm:  failed to register ebook input device: %d\n", ret);
+		goto err;
+	}
+
+	return ret;
+err:
+	if (ebook_inputdev) {
+		input_unregister_device(ebook_inputdev);
+		ebook_inputdev = NULL;
+	}
+	if (lid_inputdev) {
+		input_unregister_device(lid_inputdev);
+		lid_inputdev = NULL;
+	}
+	if (pm_inputdev) {
+		input_unregister_device(pm_inputdev);
+		pm_inputdev = NULL;
+	}
+
+	return ret;
+}
+
+static int __init olpc_pm_init(void)
+{
+	uint32_t lo, hi;
+	int ret;
+	uint8_t ec_byte;
+
+	if (!machine_is_olpc())
+		return -ENODEV;
+
+	acpi_base = geode_acpi_base();
+	pms_base = geode_pms_base();
+
+	if (!acpi_base || !pms_base)
+	  return -ENODEV;
+
+	ret = alloc_inputdevs();
+	if (ret)
+		return ret;
+
+	rdmsr(0x51400020, lo, hi);
+	sci_irq = (lo >> 20) & 15;
+
+	if (sci_irq) {
+		printk(KERN_INFO "SCI is mapped to IRQ %d\n", sci_irq);
+	} else {
+		/* Zero doesn't mean zero -- it means masked */
+		printk(KERN_INFO "SCI unmapped. Mapping to IRQ 3\n");
+		sci_irq = 3;
+		lo |= 0x00300000;
+		wrmsrl(0x51400020, lo);
+	}
+
+	olpc_fixup_bios();
+
+	lo = inl(pms_base + PM_FSD);
+
+	/* Lock, enable failsafe, 4 seconds */
+	outl(0xc001f400, pms_base + PM_FSD);
+
+	/* Here we set up the SCI events we're interested in during
+	 * real-time.  We have no sleep button, and the RTC doesn't make
+	 * sense, so set up the power button
+	 */
+
+	outl(inl(acpi_base) | ((CS5536_PM_PWRBTN) << 16), acpi_base);
+
+	if (olpc_get_rev() >= OLPC_REV_B2) {
+		gpio_wake_events |= GPIO_WAKEUP_LID;
+
+		/* Get the current value of the GPIO, and set up the edges */
+		olpc_lid_flag = geode_gpio_isset(OLPC_GPIO_LID, GPIO_READ_BACK);
+
+		/* Watch for the opposite edge */
+
+		if (olpc_lid_flag)
+			geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
+		else
+			geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
+
+		/* Enable the event */
+		geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
+	}
+
+	/* Set up the mask for wakeups the EC will generate SCIs on */
+
+	ret = olpc_ec_cmd(EC_READ_SCI_MASK, NULL, 0, &ec_byte, 1);
+	if (ret) 
+		printk(KERN_ERR "Error getting the EC SCI mask: %d\n", ret);
+	
+	/* Disable battery 1% charge wakeups */
+	ec_byte &= ~EC_SCI_SRC_BATSOC;
+
+	ret = olpc_ec_cmd(EC_WRITE_SCI_MASK, &ec_byte, 1, NULL, 0);
+	if (ret)
+		printk(KERN_ERR "Error setting the EC SCI mask: %d\n", ret);
+
+	/* Set up the EC SCI */
+
+	gpio_wake_events |= GPIO_WAKEUP_EC;
+
+	outl(gpio_wake_events, acpi_base + PM_GPE0_EN);
+	outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS);
+
+	/* Select level triggered in PIC */
+
+	if (sci_irq < 8) {
+		lo = inb(0x4d0);
+		lo |= 1 << sci_irq;
+		outb(lo, 0x4d0);
+	} else {
+		lo = inb(0x4d1);
+		lo |= 1 << (sci_irq - 8);
+		outb(lo, 0x4d1);
+	}
+	/* Clear pending interrupt */
+	outl(inl(acpi_base) | 0xFFFF, acpi_base);
+	process_sci_queue(0);	/* we just want to flush the queue here */
+	init_ebook_state();
+
+	/* Enable the interrupt */
+
+	ret = request_irq(sci_irq, &olpc_pm_interrupt, 0, "SCI", &acpi_base);
+
+	if (ret) {
+		printk(KERN_ERR "Error registering SCI: %d\n", ret);
+		return ret;
+	}
+
+	ofw_bios_entry.address = 0xF0000 + PAGE_OFFSET;
+	pm_set_ops(&olpc_pm_ops);
+
+	sysfs_create_group(&power_subsys.kobj, &olpc_attrs);
+
+	return 0;
+}
+
+
+#if defined (CONFIG_RTC_DRV_CMOS) || defined (CONFIG_RTC_DRV_CMOS_MODULE)
+struct resource rtc_platform_resource[2] = {
+	{
+		.flags		= IORESOURCE_IO,
+		.start		= RTC_PORT(0),
+		.end		= RTC_PORT(0) + RTC_IO_EXTENT
+	},
+	{
+		.flags = IORESOURCE_IRQ,
+		.start = 8,
+		.end = 8,
+	},
+};
+
+
+static void rtc_wake_on(struct device *dev)
+{
+	olpc_wakeup_mask |= CS5536_PM_RTC;
+}
+
+static void rtc_wake_off(struct device *dev)
+{
+	olpc_wakeup_mask &= ~(CS5536_PM_RTC);
+}
+
+static struct cmos_rtc_board_info rtc_info = {
+	.rtc_day_alarm = 0,
+	.rtc_mon_alarm = 0,
+	.rtc_century = 0,
+	.wake_on = rtc_wake_on,
+	.wake_off = rtc_wake_off,
+};
+
+struct platform_device olpc_rtc_device = {
+	.name = "rtc_cmos",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(rtc_platform_resource),
+	.dev.platform_data = &rtc_info,
+	.resource = rtc_platform_resource,
+};
+
+static int __init olpc_platform_init(void)
+{
+	(void)platform_device_register(&olpc_rtc_device);
+	device_init_wakeup(&olpc_rtc_device.dev, 1);
+
+	(void)platform_device_register(&olpc_powerbutton_dev);
+	device_init_wakeup(&olpc_powerbutton_dev.dev, 1);
+
+	(void)platform_device_register(&olpc_lid_dev);
+	device_init_wakeup(&olpc_lid_dev.dev, 1);
+
+	return 0;
+}
+arch_initcall(olpc_platform_init);
+#endif /* CONFIG_RTC_DRV_CMOS */
+
+static void olpc_pm_exit(void)
+{
+	/* Clear any pending events, and disable them */
+	outl(0xFFFF, acpi_base+2);
+
+	free_irq(sci_irq, &acpi_base);
+	input_unregister_device(pm_inputdev);
+	input_unregister_device(lid_inputdev);
+	input_unregister_device(ebook_inputdev);
+}
+
+static struct pm_ops olpc_pm_ops = {
+        .valid = olpc_pm_state_valid,
+        .enter = olpc_pm_enter,
+};
+
+module_init(olpc_pm_init);
+module_exit(olpc_pm_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("AMD Geode power management for OLPC CL1");
diff --git a/arch/i386/kernel/olpc-sleep.S b/arch/i386/kernel/olpc-sleep.S
new file mode 100644
index 0000000..9535c9a
--- /dev/null
+++ b/arch/i386/kernel/olpc-sleep.S
@@ -0,0 +1,39 @@
+.text
+
+ENTRY(olpc_sleep_asm)
+olpc_sleep:
+	;; Get the value of PM1_CNT and store it off
+	
+	add 08h, ax
+	mov bx,dx
+	in dx,eax
+	or 2000h, ax
+	mov ax,di
+	
+	;; flush the cache
+	wbinvd
+
+	;; GX2 must disable refresh before going into self-refresh 
+	mov 2000000180xh, ecx
+	rdmsr
+	mov eax, esi
+	and 0FF0000FFh, eax
+	wrmsr
+
+	;; Now, put  the memory into self refresh
+	mov 2004, cx
+	xor edx, edx
+	xor eax, eax
+	mov 04h, al
+	wrmsr
+
+	;; Thats all she wrote - time to go to sleep
+	
+	mov bx, dx
+	movzx di, eax
+	out eax, dx
+
+	;;  
+	
+	
+	
diff --git a/arch/i386/kernel/olpc-wakeup.S b/arch/i386/kernel/olpc-wakeup.S
new file mode 100644
index 0000000..a92cc61
--- /dev/null
+++ b/arch/i386/kernel/olpc-wakeup.S
@@ -0,0 +1,122 @@
+.text
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+
+ALIGN
+	.align 4096
+
+wakeup_start:
+#	jmp wakeup_start
+
+	cli
+	cld
+
+	# Clear any dangerous flags
+	
+	pushl $0
+	popfl
+		
+	# Set up %cr3
+	movl $swsusp_pg_dir - __PAGE_OFFSET, %eax
+	movl %eax, %cr3
+
+	movl saved_cr4, %eax
+	movl %eax, %cr4
+	
+	movl saved_cr0, %eax
+	movl %eax, %cr0
+	
+	jmp 1f
+1:	
+	ljmpl $__KERNEL_CS,$wakeup_return
+	
+
+.org 0x1000
+
+wakeup_return:
+	movw    $__KERNEL_DS, %ax
+	movw    %ax, %ss
+	movw    %ax, %ds
+	movw    %ax, %es
+	movw    %ax, %fs
+	movw    %ax, %gs
+	
+	lgdt    saved_gdt
+	lidt    saved_idt
+	lldt    saved_ldt
+	ljmp    $(__KERNEL_CS),$1f
+1:
+	movl    %cr3, %eax
+	movl    %eax, %cr3
+	wbinvd
+
+	# Go back to the return point
+	jmp ret_point
+	
+save_registers:
+	sgdt  saved_gdt
+	sidt  saved_idt
+	sldt  saved_ldt
+
+	pushl %edx
+	movl %cr4, %edx
+	movl %edx, saved_cr4
+
+	movl %cr0, %edx
+	movl %edx, saved_cr0
+
+	popl %edx
+		
+	
+        movl %ebx, saved_context_ebx
+        movl %ebp, saved_context_ebp
+        movl %esi, saved_context_esi
+        movl %edi, saved_context_edi
+
+	pushfl
+	popl saved_context_eflags
+	
+        ret
+
+
+restore_registers:
+        movl saved_context_ebp, %ebp
+        movl saved_context_ebx, %ebx
+        movl saved_context_esi, %esi
+        movl saved_context_edi, %edi
+
+	pushl saved_context_eflags
+	popfl
+	
+        ret
+
+	
+ENTRY(do_olpc_suspend_lowlevel)
+	call	save_processor_state
+	call	save_registers
+
+	# This is the stack context we want to remember
+	movl %esp, saved_context_esp
+
+	pushl	$3
+	call	olpc_do_sleep
+	
+	jmp	wakeup_start
+	.p2align 4,,7
+ret_point:
+	movl    saved_context_esp, %esp
+
+	call	restore_registers
+	call	restore_processor_state
+	ret
+
+.data
+ALIGN
+
+saved_gdt:     .long   0,0
+saved_idt:     .long   0,0
+saved_ldt:     .long   0
+saved_cr4:     .long   0
+saved_cr0:     .long   0
+
diff --git a/arch/i386/kernel/olpc.c b/arch/i386/kernel/olpc.c
new file mode 100644
index 0000000..d540cb0
--- /dev/null
+++ b/arch/i386/kernel/olpc.c
@@ -0,0 +1,320 @@
+/* Support for the OLPC DCON and OLPC EC access
+ * Copyright (C) 2006, Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mc146818rtc.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+
+#include <asm/olpc.h>
+#include <asm/ofw.h>
+
+/* This is our new multi-purpose structure used to contain the
+ * information about the platform that we detect
+ */
+
+struct olpc_platform_t olpc_platform_info;
+EXPORT_SYMBOL_GPL(olpc_platform_info);
+
+/*********************************************************************
+ *		EC locking and access
+ *********************************************************************/
+
+static DEFINE_SPINLOCK(ec_lock);
+
+/* what the timeout *should* be (in ms) */
+#define EC_BASE_TIMEOUT 20
+
+/* the timeout that bugs in the EC might force us to actually use */
+static int ec_timeout = EC_BASE_TIMEOUT;
+
+static int __init olpc_ec_timeout_set(char *str)
+{
+	if (get_option(&str, &ec_timeout) != 1) {
+		ec_timeout = EC_BASE_TIMEOUT;
+		printk(KERN_ERR "olpc-ec:  invalid argument to "
+				"'olpc_ec_timeout=', ignoring!\n");
+	}
+	printk(KERN_DEBUG "olpc-ec:  using %d ms delay for EC commands.\n",
+			ec_timeout);
+	return 1;
+}
+__setup("olpc_ec_timeout=", olpc_ec_timeout_set);
+
+/*
+ * These *bf_status functions return whether the buffers are full or not.
+ */
+
+static inline unsigned int ibf_status(unsigned int port)
+{
+	return inb(port) & 0x02;
+}
+
+static inline unsigned int obf_status(unsigned int port)
+{
+	return inb(port) & 0x01;
+}
+
+#define wait_on_ibf(p, d) __wait_on_ibf(__LINE__, (p), (d))
+static int __wait_on_ibf(unsigned int line, unsigned int port, int desired)
+{
+	unsigned int timeo;
+	int state = ibf_status(port);
+
+	for (timeo = ec_timeout; state != desired && timeo; timeo--) {
+		mdelay(1);
+		state = ibf_status(port);
+	}
+
+	if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) &&
+			timeo < (ec_timeout - EC_BASE_TIMEOUT)) {
+		printk(KERN_WARNING "olpc-ec:  waited %u ms for IBF (%d)!\n",
+				EC_BASE_TIMEOUT-timeo, line);
+	}
+
+	return !(state == desired);
+}
+
+#define wait_on_obf(p, d) __wait_on_obf(__LINE__, (p), (d))
+static int __wait_on_obf(unsigned int line, unsigned int port, int desired)
+{
+	unsigned int timeo;
+	int state = obf_status(port);
+
+	for (timeo = ec_timeout; state != desired && timeo; timeo--) {
+		mdelay(1);
+		state = obf_status(port);
+	}
+
+	if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) &&
+			timeo < (ec_timeout - EC_BASE_TIMEOUT)) {
+		printk(KERN_WARNING "olpc-ec:  waited %u ms for OBF (%d)!\n",
+				EC_BASE_TIMEOUT-timeo, line);
+	}
+
+	return !(state == desired);
+}
+
+int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
+		unsigned char *outbuf,  size_t outlen)
+{
+	unsigned long flags;
+	int ret = -EIO;
+	int i;
+
+	spin_lock_irqsave(&ec_lock, flags);
+
+	if (wait_on_ibf(0x6c, 0)) {
+		printk(KERN_ERR "olpc-ec:  timeout waiting for EC to "
+				"quiesce!\n");
+		goto err;
+	}
+
+restart:
+	/*
+	 * Note that if we time out during any IBF checks, that's a failure;
+	 * we have to return.  There's no way for the kernel to clear that.
+	 *
+	 * If we time out during an OBF check, we can restart the command;
+	 * reissuing it will clear the OBF flag, and we should be alright.
+	 * The OBF flag will sometimes misbehave due to what we believe
+	 * is a hardware quirk..
+	 */
+	printk(KERN_DEBUG "olpc-ec:  running cmd 0x%x\n", cmd);
+	outb(cmd, 0x6c);
+
+	if (wait_on_ibf(0x6c, 0)) {
+		printk(KERN_ERR "olpc-ec:  timeout waiting for EC to read "
+				"command!\n");
+		goto err;
+	}
+
+	if (inbuf && inlen) {
+		/* write data to EC */
+		for (i = 0; i < inlen; i++) {
+			if (wait_on_ibf(0x6c, 0)) {
+				printk(KERN_ERR "olpc-ec:  timeout waiting for"
+						" EC accept data!\n");
+				goto err;
+			}
+			printk(KERN_DEBUG "olpc-ec:  sending cmd arg 0x%x\n",
+					inbuf[i]);
+			outb(inbuf[i], 0x68);
+		}
+	}
+	if (outbuf && outlen) {
+		/* read data from EC */
+		for (i = 0; i < outlen; i++) {
+			if (wait_on_obf(0x6c, 1)) {
+				printk(KERN_ERR "olpc-ec:  timeout waiting for"
+						" EC to provide data!\n");
+				goto restart;
+			}
+			outbuf[i] = inb(0x68);
+			printk(KERN_DEBUG "olpc-ec:  received 0x%x\n",
+					outbuf[i]);
+		}
+	}
+
+	ret = 0;
+err:
+	spin_unlock_irqrestore(&ec_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(olpc_ec_cmd);
+
+/*********************************************************************
+ *		DCON stuff
+ *********************************************************************/
+
+static void olpc_power_off(void)
+{
+	printk(KERN_INFO "OLPC power off sequence...\n");
+	outb(0xff, 0x381);
+	outb(0x14, 0x382);
+	outb(0x01, 0x383);
+	outb(0xff, 0x381);
+	outb(0x14, 0x382);
+	outb(0x00, 0x383);
+}
+
+static void __init
+ec_detect(void)
+{
+	olpc_ec_cmd(0x08, NULL, 0, (unsigned char *) &olpc_platform_info.ecver, 1);
+}
+
+/* Check to see if this version of the OLPC board has VSA built
+ * in, and set a flag
+ */
+
+static void __init vsa_detect(void)
+{
+	u16 rev;
+
+	outw(0xFC53, 0xAC1C);
+	outw(0x0003, 0xAC1C);
+
+	rev = inw(0xAC1E);
+
+	if (rev == 0x4132)
+		olpc_platform_info.flags |= OLPC_F_VSA;
+}
+
+/* Map OFW revisions to what OLPC_REV_* */
+static const char __initdata *olpc_boardrev_str[] = {
+	"A1",
+	"preB1",
+	"B1",
+	"preB2",
+	"B2",
+	"preB3",
+	"B3",
+	"B4",
+	"C1",
+	"R1",
+};
+
+static void __init platform_detect(char *revision, size_t len)
+{
+	size_t propsize;
+	int i;
+
+	BUG_ON(ARRAY_SIZE(olpc_boardrev_str) != OLPC_REV_UNKNOWN);
+
+	if (ofw("getprop", 4, 1, NULL, "model", revision, len, &propsize)) {
+		printk(KERN_ERR "ofw: getprop call failed!\n");
+		goto failed;
+	}
+	if (len < propsize) {
+		printk(KERN_ERR "ofw: revision string is too long!\n");
+		goto failed;
+	}
+
+	for (i=0; i < ARRAY_SIZE(olpc_boardrev_str); i++) {
+		if (strcmp(revision, olpc_boardrev_str[i]) == 0) {
+			olpc_platform_info.boardrev = i;
+			return;
+		}
+	}
+
+failed:
+	strncpy(revision, "Unknown", len);
+	olpc_platform_info.boardrev = OLPC_REV_UNKNOWN;
+}
+
+static int olpc_dcon_present = -1;
+module_param(olpc_dcon_present, int, 0444);
+
+/* REV_A CMOS map:
+ * bit 440;  DCON present bit
+ */
+
+#define OLPC_CMOS_DCON_OFFSET (440 / 8)
+#define OLPC_CMOS_DCON_MASK   0x01
+
+static int __init olpc_init(void)
+{
+	unsigned char *romsig;
+	char revision[10];
+
+	spin_lock_init(&ec_lock);
+
+	romsig = ioremap(0xffffffc0, 16);
+
+	if (!romsig)
+		return 0;
+
+	if (strncmp(romsig, "CL1   Q", 7))
+		goto unmap;
+	if (strncmp(romsig+6, romsig+13, 3)) {
+		printk(KERN_INFO "OLPC BIOS signature looks invalid. Assuming not OLPC\n");
+		goto unmap;
+	}
+	printk(KERN_INFO "OLPC board with OpenFirmware: %.16s\n", romsig);
+
+	olpc_platform_info.flags |= OLPC_F_PRESENT;
+
+	pm_power_off = olpc_power_off;
+
+	/* Get the platform revision */
+	platform_detect(revision, sizeof(revision));
+
+	/* If olpc_dcon_present isn't set by the command line, then
+	 * "detect" it
+	 */
+
+	if (olpc_dcon_present == -1) {
+		/* B1 and greater always has a DCON */
+		if (olpc_platform_info.boardrev >= OLPC_REV_B1 &&
+				olpc_platform_info.boardrev < OLPC_REV_UNKNOWN)
+			olpc_dcon_present = 1;
+	}
+
+	if (olpc_dcon_present)
+		olpc_platform_info.flags |= OLPC_F_DCON;
+
+	/* Get the EC revision */
+	ec_detect();
+
+	/* Check to see if the VSA exists */
+	vsa_detect();
+
+	printk(KERN_INFO "OLPC board revision: %s (EC=%x)\n", revision,
+			olpc_platform_info.ecver);
+
+ unmap:
+	iounmap(romsig);
+
+	return 0;
+}
+
+postcore_initcall(olpc_init);
diff --git a/arch/i386/kernel/prom.c b/arch/i386/kernel/prom.c
new file mode 100644
index 0000000..d64bb27
--- /dev/null
+++ b/arch/i386/kernel/prom.c
@@ -0,0 +1,478 @@
+/*
+ * Procedures for creating, accessing and interpreting the device tree.
+ *
+ * Paul Mackerras	August 1996.
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ * 
+ *  Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
+ *    {engebret|bergner}@us.ibm.com 
+ *
+ *  Adapted for sparc64 by David S. Miller davem@davemloft.net
+ *
+ *  Adapter for i386/OLPC by Andres Salomon <dilinger@debian.org>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <asm/prom.h>
+#include <asm/ofw.h>
+
+/*
+ * XXX: This is very much a stub; right now we're keeping 2 device trees
+ * in memory (one for promfs, and one here).  That will not remain
+ * for long!
+ */
+
+static struct device_node *allnodes;
+
+/* use when traversing tree through the allnext, child, sibling,
+ * or parent members of struct device_node.
+ */
+static DEFINE_RWLOCK(devtree_lock);
+
+int of_device_is_compatible(const struct device_node *device,
+			    const char *compat)
+{
+	const char* cp;
+	int cplen, l;
+
+	cp = of_get_property(device, "compatible", &cplen);
+	if (cp == NULL)
+		return 0;
+	while (cplen > 0) {
+		if (strncmp(cp, compat, strlen(compat)) == 0)
+			return 1;
+		l = strlen(cp) + 1;
+		cp += l;
+		cplen -= l;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(of_device_is_compatible);
+
+struct device_node *of_get_parent(const struct device_node *node)
+{
+	struct device_node *np;
+
+	if (!node)
+		return NULL;
+
+	np = node->parent;
+
+	return np;
+}
+EXPORT_SYMBOL(of_get_parent);
+
+struct device_node *of_get_next_child(const struct device_node *node,
+	struct device_node *prev)
+{
+	struct device_node *next;
+
+	next = prev ? prev->sibling : node->child;
+	for (; next != 0; next = next->sibling) {
+		break;
+	}
+
+	return next;
+}
+EXPORT_SYMBOL(of_get_next_child);
+
+struct device_node *of_find_node_by_path(const char *path)
+{
+	struct device_node *np = allnodes;
+
+	for (; np != 0; np = np->allnext) {
+		if (np->full_name != 0 && strcmp(np->full_name, path) == 0)
+			break;
+	}
+
+	return np;
+}
+EXPORT_SYMBOL(of_find_node_by_path);
+
+struct device_node *of_find_node_by_phandle(phandle handle)
+{
+	struct device_node *np;
+
+	for (np = allnodes; np != 0; np = np->allnext)
+		if (np->node == handle)
+			break;
+
+	return np;
+}
+EXPORT_SYMBOL(of_find_node_by_phandle);
+
+struct device_node *of_find_node_by_name(struct device_node *from,
+	const char *name)
+{
+	struct device_node *np;
+
+	np = from ? from->allnext : allnodes;
+	for (; np != NULL; np = np->allnext)
+		if (np->name != NULL && strcmp(np->name, name) == 0)
+			break;
+
+	return np;
+}
+EXPORT_SYMBOL(of_find_node_by_name);
+
+struct device_node *of_find_node_by_type(struct device_node *from,
+	const char *type)
+{
+	struct device_node *np;
+
+	np = from ? from->allnext : allnodes;
+	for (; np != 0; np = np->allnext)
+		if (np->type != 0 && strcmp(np->type, type) == 0)
+			break;
+
+	return np;
+}
+EXPORT_SYMBOL(of_find_node_by_type);
+
+struct device_node *of_find_compatible_node(struct device_node *from,
+	const char *type, const char *compatible)
+{
+	struct device_node *np;
+
+	np = from ? from->allnext : allnodes;
+	for (; np != 0; np = np->allnext) {
+		if (type != NULL
+		    && !(np->type != 0 && strcmp(np->type, type) == 0))
+			continue;
+		if (of_device_is_compatible(np, compatible))
+			break;
+	}
+
+	return np;
+}
+EXPORT_SYMBOL(of_find_compatible_node);
+
+struct property *of_find_property(const struct device_node *np,
+				  const char *name,
+				  int *lenp)
+{
+	struct property *pp;
+
+	for (pp = np->properties; pp != 0; pp = pp->next) {
+		if (strcasecmp(pp->name, name) == 0) {
+			if (lenp != 0)
+				*lenp = pp->length;
+			break;
+		}
+	}
+	return pp;
+}
+EXPORT_SYMBOL(of_find_property);
+
+/*
+ * Find a property with a given name for a given node
+ * and return the value.
+ */
+const void *of_get_property(const struct device_node *np, const char *name,
+		      int *lenp)
+{
+	struct property *pp = of_find_property(np,name,lenp);
+	return pp ? pp->value : NULL;
+}
+EXPORT_SYMBOL(of_get_property);
+
+int of_getintprop_default(struct device_node *np, const char *name, int def)
+{
+	struct property *prop;
+	int len;
+
+	prop = of_find_property(np, name, &len);
+	if (!prop || len != 4)
+		return def;
+
+	return *(int *) prop->value;
+}
+EXPORT_SYMBOL(of_getintprop_default);
+
+int of_n_addr_cells(struct device_node *np)
+{
+	const int* ip;
+	do {
+		if (np->parent)
+			np = np->parent;
+		ip = of_get_property(np, "#address-cells", NULL);
+		if (ip != NULL)
+			return *ip;
+	} while (np->parent);
+	/* No #address-cells property for the root node, default to 2 */
+	return 2;
+}
+EXPORT_SYMBOL(of_n_addr_cells);
+
+int of_n_size_cells(struct device_node *np)
+{
+	const int* ip;
+	do {
+		if (np->parent)
+			np = np->parent;
+		ip = of_get_property(np, "#size-cells", NULL);
+		if (ip != NULL)
+			return *ip;
+	} while (np->parent);
+	/* No #size-cells property for the root node, default to 1 */
+	return 1;
+}
+EXPORT_SYMBOL(of_n_size_cells);
+
+int of_set_property(struct device_node *dp, const char *name, void *val, int len)
+{
+	return -EIO;
+}
+EXPORT_SYMBOL(of_set_property);
+
+static unsigned int prom_early_allocated;
+
+static void * __init prom_early_alloc(unsigned long size)
+{
+	void *ret;
+
+	ret = kmalloc(size, GFP_KERNEL);
+	if (ret != NULL)
+		memset(ret, 0, size);
+	else
+		printk(KERN_ERR "ACK!  couldn't allocate prom memory!\n");
+
+	prom_early_allocated += size;
+
+	return ret;
+}
+
+static int is_root_node(const struct device_node *dp)
+{
+	if (!dp)
+		return 0;
+
+	return (dp->parent == NULL);
+}
+
+static char * __init build_path_component(struct device_node *dp)
+{
+	int pathlen;
+	char *n, *i;
+
+	if (ofw("package-to-path", 3, 1, dp->node, NULL, 0, &pathlen)) {
+		printk(KERN_ERR "PROM: unable to get path name from OFW!\n");
+		return "ERROR";
+	}
+	n = prom_early_alloc(pathlen + 1);
+	if (ofw("package-to-path", 3, 1, dp->node, n, pathlen+1, &pathlen))
+		printk(KERN_ERR "PROM: unable to get path name from OFW\n");
+
+	if ((i = strrchr(n, '/')))
+		n = ++i;	/* we only want the file name */
+	return n;
+}
+
+static char * __init build_full_name(struct device_node *dp)
+{
+	int len, ourlen, plen;
+	char *n;
+
+	plen = strlen(dp->parent->full_name);
+	ourlen = strlen(dp->path_component_name);
+	len = ourlen + plen + 2;
+
+	n = prom_early_alloc(len);
+	strcpy(n, dp->parent->full_name);
+	if (!is_root_node(dp->parent)) {
+		strcpy(n + plen, "/");
+		plen++;
+	}
+	strcpy(n + plen, dp->path_component_name);
+
+	return n;
+}
+
+static struct property * __init build_one_prop(phandle node, char *prev, char *special_name, void *special_val, int special_len)
+{
+	static struct property *tmp = NULL;
+	struct property *p;
+
+	if (tmp) {
+		p = tmp;
+		memset(p, 0, sizeof(*p) + 32);
+		tmp = NULL;
+	} else {
+		p = prom_early_alloc(sizeof(struct property) + 32);
+	}
+
+	p->name = (char *) (p + 1);
+	if (special_name) {
+		strcpy(p->name, special_name);
+		p->length = special_len;
+		p->value = prom_early_alloc(special_len);
+		memcpy(p->value, special_val, special_len);
+	} else {
+		int fl;
+		if (prev == NULL) {
+			if (ofw("nextprop", 3, 1, node, "", p->name, &fl)) {
+				printk(KERN_ERR "PROM: %s: nextprop failed!\n", __func__);
+				return NULL;
+			}
+		} else {
+			if (ofw("nextprop", 3, 1, node, prev, p->name, &fl)) {
+				printk(KERN_ERR "PROM: %s: nextprop failed!\n", __func__);
+				return NULL;
+			}
+		}
+		if (strlen(p->name) == 0 || fl != 1) {
+			tmp = p;
+			return NULL;
+		}
+		if (ofw("getproplen", 2, 1, node, p->name, &p->length)) {
+			printk(KERN_ERR "PROM: %s: getproplen failed!\n", __func__);
+			return NULL;
+		}
+		if (p->length <= 0) {
+			p->length = 0;
+		} else {
+			p->value = prom_early_alloc(p->length + 1);
+			if (ofw("getprop", 4, 1, node, p->name, p->value, p->length, &p->length)) {
+				printk(KERN_ERR "PROM: %s: getprop failed!\n", __func__);
+				return NULL;
+			}
+			((unsigned char *)p->value)[p->length] = '\0';
+		}
+	}
+	return p;
+}
+
+static struct property * __init build_prop_list(phandle node)
+{
+	struct property *head, *tail;
+
+	head = tail = build_one_prop(node, NULL,
+				     ".node", &node, sizeof(node));
+
+	tail->next = build_one_prop(node, NULL, NULL, NULL, 0);
+	tail = tail->next;
+	while(tail) {
+		tail->next = build_one_prop(node, tail->name,
+					    NULL, NULL, 0);
+		tail = tail->next;
+	}
+
+	return head;
+}
+
+static char * __init get_one_property(phandle node, const char *name)
+{
+	char *buf = "<NULL>";
+	int len;
+
+	if (ofw("getproplen", 2, 1, node, name, &len)) {
+		printk(KERN_ERR "PROM: %s: getproplen failed!\n", __func__);
+		return NULL;
+	}
+	if (len > 0) {
+		buf = prom_early_alloc(len);
+		if (ofw("getprop", 4, 1, node, name, buf, len, &len)) {
+			printk(KERN_ERR "PROM: %s: getprop failed!\n", __func__);
+			return NULL;
+		}
+	}
+
+	return buf;
+}
+
+static struct device_node * __init create_node(phandle node, struct device_node *parent)
+{
+	struct device_node *dp;
+
+	if (!node)
+		return NULL;
+
+	dp = prom_early_alloc(sizeof(*dp));
+	dp->parent = parent;
+
+	kref_init(&dp->kref);
+
+	dp->name = get_one_property(node, "name");
+	dp->type = get_one_property(node, "device_type");
+	dp->node = node;
+
+	dp->properties = build_prop_list(node);
+
+	return dp;
+}
+
+static struct device_node * __init build_tree(struct device_node *parent, phandle node, struct device_node ***nextp)
+{
+	struct device_node *ret = NULL, *prev_sibling = NULL;
+	struct device_node *dp;
+	u32 child;
+
+	while (1) {
+		dp = create_node(node, parent);
+		if (!dp)
+			break;
+
+		if (prev_sibling)
+			prev_sibling->sibling = dp;
+
+		if (!ret)
+			ret = dp;
+		prev_sibling = dp;
+
+		*(*nextp) = dp;
+		*nextp = &dp->allnext;
+
+		dp->path_component_name = build_path_component(dp);
+		dp->full_name = build_full_name(dp);
+
+		if (ofw("child", 1, 1, node, &child)) {
+			printk(KERN_ERR "PROM: %s: fetching child failed!\n", __func__);
+			return NULL;
+		}
+		dp->child = build_tree(dp, child, nextp);
+
+		if (ofw("peer", 1, 1, node, &node)) {
+			printk(KERN_ERR "PROM: %s: fetching peer failed!\n", __func__);
+			return NULL;
+		}
+	}
+
+	return ret;
+}
+
+static phandle root_node;
+
+void __init prom_build_devicetree(void)
+{
+	struct device_node **nextp;
+	u32 child;
+
+	if (ofw("peer", 1, 1, 0, &root_node)) {
+		printk(KERN_ERR "PROM: unable to get root node from OFW!\n");
+		return;
+	}
+
+	allnodes = create_node(root_node, NULL);
+	allnodes->path_component_name = "";
+	allnodes->full_name = "/";
+
+	nextp = &allnodes->allnext;
+	if (ofw("child", 1, 1, allnodes->node, &child)) {
+		printk(KERN_ERR "PROM: unable to get child node from OFW!\n");
+		return;
+	}
+	allnodes->child = build_tree(allnodes, child, &nextp);
+	printk("PROM: Built device tree with %u bytes of memory.\n",
+	       prom_early_allocated);
+}
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
index d474cd6..c4b26ba 100644
--- a/arch/i386/kernel/setup.c
+++ b/arch/i386/kernel/setup.c
@@ -362,8 +362,10 @@ void __init zone_sizes_init(void)
 {
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+#ifdef CONFIG_ZONE_DMA
 	max_zone_pfns[ZONE_DMA] =
 		virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+#endif
 	max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
 #ifdef CONFIG_HIGHMEM
 	max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
@@ -428,6 +430,9 @@ void __init setup_bootmem_allocator(void)
 	 */
 	acpi_reserve_bootmem();
 #endif
+#ifdef CONFIG_OLPC_PM
+	reserve_bootmem(0xf0000, PAGE_SIZE);
+#endif
 #ifdef CONFIG_X86_FIND_SMP_CONFIG
 	/*
 	 * Find and reserve possible boot-time SMP configuration:
diff --git a/arch/i386/pci/Makefile b/arch/i386/pci/Makefile
index 44650e0..1250a7b 100644
--- a/arch/i386/pci/Makefile
+++ b/arch/i386/pci/Makefile
@@ -3,6 +3,7 @@ obj-y				:= i386.o init.o
 obj-$(CONFIG_PCI_BIOS)		+= pcbios.o
 obj-$(CONFIG_PCI_MMCONFIG)	+= mmconfig.o direct.o mmconfig-shared.o
 obj-$(CONFIG_PCI_DIRECT)	+= direct.o
+obj-$(CONFIG_PCI_OLPC)		+= olpc.o
 
 pci-y				:= fixup.o
 pci-$(CONFIG_ACPI)		+= acpi.o
diff --git a/arch/i386/pci/init.c b/arch/i386/pci/init.c
index 3de9f9b..0f5f7dd 100644
--- a/arch/i386/pci/init.c
+++ b/arch/i386/pci/init.c
@@ -14,6 +14,9 @@ static __init int pci_access_init(void)
 #ifdef CONFIG_PCI_MMCONFIG
 	pci_mmcfg_init(type);
 #endif
+#ifdef CONFIG_PCI_OLPC
+	pci_olpc_init();
+#endif
 	if (raw_pci_ops)
 		return 0;
 #ifdef CONFIG_PCI_BIOS
diff --git a/arch/i386/pci/olpc.c b/arch/i386/pci/olpc.c
new file mode 100644
index 0000000..1518d25
--- /dev/null
+++ b/arch/i386/pci/olpc.c
@@ -0,0 +1,298 @@
+/*
+ * olpcpci.c - Low-level PCI config space access for OLPC systems
+ * without the VSA PCI virtualization software.
+ *
+ * The AMD Geode chipset (GX2 processor, cs5536 I/O companion device)
+ * has some I/O functions (display, southbridge, sound, USB HCIs, etc)
+ * that more or less behave like PCI devices, but the hardware doesn't
+ * directly implement the PCI configuration space headers.  AMD provides
+ * "VSA" (Virtual System Architecture) software that emulates PCI config
+ * space for these devices, by trapping I/O accesses to PCI config register
+ * (CF8/CFC) and running some code in System Management Mode interrupt state.
+ * On the OLPC platform, we don't want to use that VSA code because
+ * (a) it slows down suspend/resume, and (b) recompiling it requires special
+ * compilers that are hard to get.  So instead of letting the complex VSA
+ * code simulate the PCI config registers for the on-chip devices, we
+ * just simulate them the easy way, by inserting the code into the
+ * pci_write_config and pci_read_config path.  Most of the config registers
+ * are read-only anyway, so the bulk of the simulation is just table lookup.
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <asm/olpc.h>
+#include <asm/geode.h>
+#include "pci.h"
+
+static int is_lx;
+
+/*
+ * In the tables below, the first two line (8 longwords) are the
+ * size masks that are used when the higher level PCI code determines
+ * the size of the region by writing ~0 to a base address register
+ * and reading back the result.
+ *
+ * The following lines are the values that are read during normal
+ * PCI config access cycles, i.e. not after just having written
+ * ~0 to a base address register.
+ */
+
+static const u32 lxnb_hdr[] = {  /* dev 1 function 0 - devfn = 8 */
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+
+    0x281022 ,  0x2200005 ,  0x6000021 ,   0x80f808 ,  /* AMD Vendor ID */
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,  /* No virtual registers, hence no BAR for them */
+         0x0 ,        0x0 ,        0x0 ,   0x28100b ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+};
+
+static const u32 gxnb_hdr[] = {  /* dev 1 function 0 - devfn = 8 */
+  0xfffffffd ,        0x0 ,        0x0 ,        0x0 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+
+    0x28100b ,  0x2200005 ,  0x6000021 ,   0x80f808 ,  /* NSC Vendor ID */
+      0xac1d ,        0x0 ,        0x0 ,        0x0 ,  /* I/O BAR - base of virtual registers */
+         0x0 ,        0x0 ,        0x0 ,   0x28100b ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+};
+
+static const u32 lxfb_hdr[] = {  /* dev 1 function 1 - devfn = 9 */
+  0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+
+  0x20811022 ,  0x2200003 ,  0x3000000 ,        0x0 , /* AMD Vendor ID */
+  0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */
+  0xfe00c000 ,        0x0 ,        0x0 ,   0x30100b , /* VIP */
+         0x0 ,        0x0 ,        0x0 ,      0x10e , /* INTA, IRQ14 for graphics accel */
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+       0x3d0 ,      0x3c0 ,    0xa0000 ,        0x0 , /* VG IO, VG IO, EGA FB, MONO FB */
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+};
+
+static const u32 gxfb_hdr[] = {  /* dev 1 function 1 - devfn = 9 */
+  0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+
+    0x30100b ,  0x2200003 ,  0x3000000 ,        0x0 , /* NSC Vendor ID */
+  0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */
+         0x0 ,        0x0 ,        0x0 ,   0x30100b ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+       0x3d0 ,      0x3c0 ,    0xa0000 ,        0x0 , /* VG IO, VG IO, EGA FB, MONO FB */
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+};
+
+static const u32 aes_hdr[] = {	/* dev 1 function 2 - devfn = 0xa */
+  0xffffc000 ,        0x0 ,        0x0 ,        0x0 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+
+  0x20821022 ,  0x2a00006 , 0x10100000 ,        0x8 , /* NSC Vendor ID */
+  0xfe010000 ,        0x0 ,        0x0 ,        0x0 , /* AES registers */
+         0x0 ,        0x0 ,        0x0 , 0x20821022 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+};
+
+
+static const u32 isa_hdr[] = {  /* dev f function 0 - devfn = 78 */
+  0xfffffff9 , 0xffffff01 , 0xffffffc1 , 0xffffffe1 ,
+  0xffffff81 , 0xffffffc1 ,        0x0 ,        0x0 ,
+
+  0x20901022 ,  0x2a00049 ,  0x6010003 ,   0x802000 ,
+      0x18b1 ,     0x1001 ,     0x1801 ,     0x1881 , /* SMB-8   GPIO-256  MFGPT-64  IRQ-32 */
+      0x1401 ,     0x1841 ,        0x0 , 0x20901022 , /* PMS-128 ACPI-64 */
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+         0x0 ,        0x0 ,        0x0 ,     0xaa5b , /* interrupt steering */
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+};
+
+static const u32 ac97_hdr[] = {  /* dev f function 3 - devfn = 7b */
+  0xffffff81 ,        0x0 ,        0x0 ,        0x0 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+
+  0x20931022 ,  0x2a00041 ,  0x4010001 ,        0x0 ,
+      0x1481 ,        0x0 ,        0x0 ,        0x0 , /* I/O BAR-128 */
+         0x0 ,        0x0 ,        0x0 , 0x20931022 ,
+         0x0 ,        0x0 ,        0x0 ,      0x205 , /* IntB , IRQ5 */
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+};
+
+static const u32 ohci_hdr[] = {  /* dev f function 4 - devfn = 7c */
+  0xfffff000 ,        0x0 ,        0x0 ,        0x0 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+
+  0x20941022 ,  0x2300006 ,  0xc031002 ,        0x0 ,
+  0xfe01a000 ,        0x0 ,        0x0 ,        0x0 , /* MEMBAR-1000 */
+         0x0 ,        0x0 ,        0x0 , 0x20941022 ,
+         0x0 ,       0x40 ,        0x0 ,      0x40a , /* CapPtr  INT-D, IRQ A */
+  0xc8020001 ,        0x0 ,        0x0 ,        0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+};
+
+static const u32 ehci_hdr[] = {  /* dev f function 4 - devfn = 7d */
+  0xfffff000 ,        0x0 ,        0x0 ,        0x0 ,
+         0x0 ,        0x0 ,        0x0 ,        0x0 ,
+
+  0x20951022 ,  0x2300006 ,  0xc032002 ,        0x0 ,
+  0xfe01b000 ,        0x0 ,        0x0 ,        0x0 , /* MEMBAR-1000 */
+         0x0 ,        0x0 ,        0x0 , 0x20951022 ,
+         0x0 ,       0x40 ,        0x0 ,      0x40a , /* CapPtr  INT-D, IRQ A */
+  0xc8020001 ,        0x0 ,        0x0 ,        0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */
+#if 0
+         0x1 , 0x40080000 ,        0x0 ,        0x0 , /* EECP - see section 2.1.7 of EHCI spec */
+#endif
+  0x01000001 , 0x00000000 ,        0x0 ,        0x0 , /* EECP - see section 2.1.7 of EHCI spec */
+      0x2020 ,        0x0 ,        0x0 ,        0x0 , /* (EHCI page 8) 60 SBRN (R/O), 61 FLADJ (R/W), PORTWAKECAP  */
+};
+
+static u32 ff_loc    = ~0;
+static u32 zero_loc  =  0;
+
+static int bar_probing = 0;       /* Set after a write of ~0 to a BAR */
+
+#define NB_SLOT 0x1      /* Northbridge - GX chip - Device 1 */
+#define SB_SLOT 0xf      /* Southbridge - CS5536 chip - Device F */
+#define SIMULATED(bus, devfn)  (((bus) == 0) && ((PCI_SLOT(devfn) == NB_SLOT) || (PCI_SLOT(devfn) == SB_SLOT)))
+
+static u32 *hdr_addr(const u32 *hdr, int reg)
+{
+	u32 addr;
+
+	/*
+	 * This is a little bit tricky.  The header maps consist of
+	 * 0x20 bytes of size masks, followed by 0x70 bytes of header data.
+	 * In the normal case, when not probing a BAR's size, we want
+	 * to access the header data, so we add 0x20 to the reg offset,
+	 * thus skipping the size mask area.
+	 * In the BAR probing case, we want to access the size mask for
+	 * the BAR, so we subtract 0x10 (the config header offset for
+	 * BAR0), and don't skip the size mask area.
+	 */
+
+	addr = (u32)hdr + reg + (bar_probing ? -0x10 : 0x20);
+
+	bar_probing = 0;
+	return (u32 *)addr;
+}
+
+static int pci_olpc_read(unsigned int seg, unsigned int bus,
+		unsigned int devfn, int reg, int len, u32 *value)
+{
+	u32 *addr;
+
+	/* Use the hardware mechanism for non-simulated devices */
+	if (!SIMULATED(bus, devfn))
+		return pci_conf1_read(seg, bus, devfn, reg, len, value);
+
+	/*
+	 * No device has config registers past 0x70, so we save table space
+	 * by not storing entries for the nonexistent registers
+	 */
+	if (reg >= 0x70)
+		addr = &zero_loc;
+	else {
+		switch (devfn) {
+			case  0x8:
+				addr = hdr_addr(is_lx ? lxnb_hdr : gxnb_hdr, reg);
+				break;
+			case  0x9:
+				addr = hdr_addr(is_lx ? lxfb_hdr : gxfb_hdr, reg);
+				break;
+			case  0xa:
+				addr = is_lx ? hdr_addr(aes_hdr, reg) : &ff_loc;
+				break;
+			case 0x78:
+				addr = hdr_addr(isa_hdr, reg);
+				break;
+			case 0x7b:
+				addr = hdr_addr(ac97_hdr, reg);
+				break;
+			case 0x7c:
+				addr = hdr_addr(ohci_hdr, reg);
+				break;
+			case 0x7d:
+				addr = hdr_addr(ehci_hdr, reg);
+				break;
+			default:
+				addr = &ff_loc;
+				break;
+		}
+	}
+	switch (len) {
+		case 1:
+			*value = *(u8 *) addr;
+			break;
+		case 2:
+			*value = *(u16 *) addr;
+			break;
+		case 4:
+			*value = *addr;
+			break;
+		default:
+			BUG();
+	}
+
+	return 0;
+}
+
+static int pci_olpc_write(unsigned int seg, unsigned int bus,
+		unsigned int devfn, int reg, int len, u32 value)
+{
+	/* Use the hardware mechanism for non-simulated devices */
+	if (!SIMULATED(bus, devfn))
+		return pci_conf1_write(seg, bus, devfn, reg, len, value);
+
+	/* XXX we may want to extend this to simulate EHCI power management */
+
+	/*
+	 * Mostly we just discard writes, but if the write is a size probe
+	 * (i.e. writing ~0 to a BAR), we remember it and arrange to return
+	 * the appropriate size mask on the next read.  This is cheating
+	 * to some extent, because it depends on the fact that the next
+	 * access after such a write will always be a read to the same BAR.
+	 */
+
+	if ((reg >= 0x10) && (reg < 0x2c)) {
+		/* Write is to a BAR */
+		if (value == ~0)
+			bar_probing = 1;
+	} else {
+		/*
+		 * No warning on writes to ROM BAR, CMD, LATENCY_TIMER,
+		 * CACHE_LINE_SIZE, or PM registers.
+		 */
+		if ((reg != 0x30) && (reg != 0x04) && (reg != 0x0d) &&
+		    (reg != 0x0c) && (reg != 0x44))
+			printk(KERN_WARNING "OLPC PCI: Config write to devfn %x reg %x value %x\n", devfn, reg, value);
+	}
+
+	return 0;
+}
+
+static struct pci_raw_ops pci_olpc_conf = {
+	.read =		pci_olpc_read,
+	.write =	pci_olpc_write,
+};
+
+void __init pci_olpc_init(void)
+{
+	if (!machine_is_olpc() || olpc_has_vsa())
+		return;
+
+	printk(KERN_INFO "PCI: Using configuration type OLPC\n");
+	raw_pci_ops = &pci_olpc_conf;
+	is_lx = is_geode_lx();
+}
diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h
index 8c66f27..a67e617 100644
--- a/arch/i386/pci/pci.h
+++ b/arch/i386/pci/pci.h
@@ -93,6 +93,7 @@ extern void pci_direct_init(int type);
 extern void pci_pcbios_init(void);
 extern void pci_mmcfg_init(int type);
 extern void pcibios_sort(void);
+extern void pci_olpc_init(void);
 
 /* pci-mmconfig.c */
 
diff --git a/drivers/Makefile b/drivers/Makefile
index f0878b2..c033d30 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -23,6 +23,8 @@ obj-y				+= char/
 
 obj-$(CONFIG_CONNECTOR)		+= connector/
 
+obj-$(CONFIG_SYSPROF)		+= sysprof/
+
 # i810fb and intelfb depend on char/agp/
 obj-$(CONFIG_FB_I810)           += video/i810/
 obj-$(CONFIG_FB_INTEL)          += video/intelfb/
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index c6f6f42..55ae42c 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -37,6 +37,9 @@
 char vt_dont_switch;
 extern struct tty_driver *console_driver;
 
+/* Add a notifier chain to inform drivers of a VT_TEXT/VT_GRAPHICS switch */
+RAW_NOTIFIER_HEAD(console_notifier_list);
+
 #define VT_IS_IN_USE(i)	(console_driver->ttys[i] && console_driver->ttys[i]->count)
 #define VT_BUSY(i)	(VT_IS_IN_USE(i) || i == fg_console || vc_cons[i].d == sel_cons)
 
@@ -491,6 +494,14 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 		vc->vc_mode = (unsigned char) arg;
 		if (console != fg_console)
 			return 0;
+
+		/* Notify listeners if the current fg_console has switched */
+
+		raw_notifier_call_chain(&console_notifier_list,
+			(arg == KD_TEXT) ?
+			CONSOLE_EVENT_SWITCH_TEXT :
+			CONSOLE_EVENT_SWITCH_GRAPHICS, 0);
+
 		/*
 		 * explicitly blank/unblank the screen if switching modes
 		 */
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index e6c4a2b..874d623 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -46,6 +46,10 @@ static int base[MAX_DEVICES] = { 0x820, 0x840 };
 module_param_array(base, int, NULL, 0);
 MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers");
 
+static unsigned int smbclk = 0x70;
+module_param(smbclk, uint, 0);
+MODULE_PARM_DESC(smbclk, "Specify the SMB_CLK value");
+
 #define POLL_TIMEOUT	(HZ/5)
 
 enum scx200_acb_state {
@@ -108,6 +112,7 @@ struct scx200_acb_iface {
 #define ACBADDR		(iface->base + 4)
 #define ACBCTL2		(iface->base + 5)
 #define    ACBCTL2_ENABLE	0x01
+#define ACBCTL3        (iface->base + 6)
 
 /************************************************************************/
 
@@ -392,11 +397,13 @@ static __init int scx200_acb_probe(struct scx200_acb_iface *iface)
 {
 	u8 val;
 
-	/* Disable the ACCESS.bus device and Configure the SCL
-	   frequency: 16 clock cycles */
-	outb(0x70, ACBCTL2);
+	/* Disable the ACCESS.bus device and Configure the SCL */
+
+	outb((smbclk & 0x7F) << 1, ACBCTL2);
+
+	outb((smbclk >> 7) & 0xFF, ACBCTL3);
 
-	if (inb(ACBCTL2) != 0x70) {
+	if (inb(ACBCTL2) != ((smbclk & 0x7F) << 1)) {
 		pr_debug(NAME ": ACBCTL2 readback failed\n");
 		return -ENXIO;
 	}
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 41fc3d0..a15e7a9 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -63,12 +63,25 @@ static int atkbd_extra;
 module_param_named(extra, atkbd_extra, bool, 0);
 MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards");
 
+#define ATKBD_KEY_UNKNOWN	  0
+#define ATKBD_KEY_NULL		0xFF0000FF
+
+#define ATKBD_SCR_1		0xFF0000FE
+#define ATKBD_SCR_2		0xFF0000FD
+#define ATKBD_SCR_4		0xFF0000FC
+#define ATKBD_SCR_8		0xFF0000FB
+#define ATKBD_SCR_CLICK		0xFF0000FA
+#define ATKBD_SCR_LEFT		0xFF0000F9
+#define ATKBD_SCR_RIGHT		0xFF0000F8
+
+#define ATKBD_SPECIAL		0xFF0000F8
+
 /*
  * Scancode to keycode tables. These are just the default setting, and
  * are loadable via an userland utility.
  */
 
-static unsigned char atkbd_set2_keycode[512] = {
+static unsigned int atkbd_set2_keycode[512] = {
 
 #ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES
 
@@ -87,11 +100,17 @@ static unsigned char atkbd_set2_keycode[512] = {
 	 82, 83, 80, 76, 77, 72,  1, 69, 87, 78, 81, 74, 55, 73, 70, 99,
 
 	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
-	217,100,255,  0, 97,165,  0,  0,156,  0,  0,  0,  0,  0,  0,125,
+
+	217,100,ATKBD_KEY_NULL,  0, 97,165,  0,  0,
+	156,  0,  0,  0,  0,  0,  0,125,
+
 	173,114,  0,113,  0,  0,  0,126,128,  0,  0,140,  0,  0,  0,127,
 	159,  0,115,  0,164,  0,  0,116,158,  0,172,166,  0,  0,  0,142,
 	157,  0,  0,  0,  0,  0,  0,  0,155,  0, 98,  0,  0,163,  0,  0,
-	226,  0,  0,  0,  0,  0,  0,  0,  0,255, 96,  0,  0,  0,143,  0,
+
+	226,  0,  0,  0,  0,  0,  0,  0,
+	  0,ATKBD_KEY_NULL, 96,  0,  0,  0,143,  0,
+
 	  0,  0,  0,  0,  0,  0,  0,  0,  0,107,  0,105,102,  0,  0,112,
 	110,111,108,112,106,103,  0,119,  0,118,109,  0, 99,104,119,  0,
 
@@ -150,19 +169,6 @@ static unsigned char atkbd_unxlate_table[128] = {
 #define ATKBD_RET_HANGEUL	0xf2
 #define ATKBD_RET_ERR		0xff
 
-#define ATKBD_KEY_UNKNOWN	  0
-#define ATKBD_KEY_NULL		255
-
-#define ATKBD_SCR_1		254
-#define ATKBD_SCR_2		253
-#define ATKBD_SCR_4		252
-#define ATKBD_SCR_8		251
-#define ATKBD_SCR_CLICK		250
-#define ATKBD_SCR_LEFT		249
-#define ATKBD_SCR_RIGHT		248
-
-#define ATKBD_SPECIAL		248
-
 #define ATKBD_LED_EVENT_BIT	0
 #define ATKBD_REP_EVENT_BIT	1
 
@@ -174,7 +180,7 @@ static unsigned char atkbd_unxlate_table[128] = {
 #define ATKBD_XL_HANJA		0x20
 
 static struct {
-	unsigned char keycode;
+	unsigned int keycode;
 	unsigned char set2;
 } atkbd_scroll_keys[] = {
 	{ ATKBD_SCR_1,     0xc5 },
@@ -200,7 +206,7 @@ struct atkbd {
 	char phys[32];
 
 	unsigned short id;
-	unsigned char keycode[512];
+	unsigned int keycode[512];
 	unsigned char set;
 	unsigned char translated;
 	unsigned char extra;
@@ -351,7 +357,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
 	unsigned int code = data;
 	int scroll = 0, hscroll = 0, click = -1, add_release_event = 0;
 	int value;
-	unsigned char keycode;
+	unsigned int keycode;
 
 #ifdef ATKBD_DEBUG
 	printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags);
@@ -856,9 +862,11 @@ static void atkbd_set_keycode_table(struct atkbd *atkbd)
 						atkbd->keycode[i | 0x80] = atkbd_scroll_keys[j].keycode;
 		}
 	} else if (atkbd->set == 3) {
-		memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode));
+		for (i = 0; i < ARRAY_SIZE(atkbd_set3_keycode); i++)
+			atkbd->keycode[i] = atkbd_set3_keycode[i];
 	} else {
-		memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode));
+		for (i = 0; i < ARRAY_SIZE(atkbd_set2_keycode); i++)
+			atkbd->keycode[i] = atkbd_set2_keycode[i];
 
 		if (atkbd->scroll)
 			for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++)
@@ -925,8 +933,8 @@ static void atkbd_set_device_attrs(struct atkbd *atkbd)
 	}
 
 	input_dev->keycode = atkbd->keycode;
-	input_dev->keycodesize = sizeof(unsigned char);
-	input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode);
+	input_dev->keycodesize = sizeof(unsigned int);
+	input_dev->keycodemax = ARRAY_SIZE(atkbd->keycode);
 
 	for (i = 0; i < 512; i++)
 		if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL)
@@ -1017,6 +1025,10 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv)
 	return err;
 }
 
+#ifdef CONFIG_OLPC
+#include <asm/olpc.h>
+#endif
+
 /*
  * atkbd_reconnect() tries to restore keyboard into a sane state and is
  * most likely called on resume.
@@ -1027,6 +1039,12 @@ static int atkbd_reconnect(struct serio *serio)
 	struct atkbd *atkbd = serio_get_drvdata(serio);
 	struct serio_driver *drv = serio->drv;
 
+#ifdef CONFIG_OLPC
+	if (olpc_rev_after(OLPC_REV_B2))
+		if (serio->dev.power.power_state.event != PM_EVENT_ON)
+			return 0;
+#endif
+
 	if (!atkbd || !drv) {
 		printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n");
 		return -1;
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index 7bbea09..6febbc5 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -96,6 +96,16 @@ config MOUSE_PS2_TOUCHKIT
 
 	  If unsure, say N.
 
+config MOUSE_PS2_OLPC
+	bool "OLPC PS/2 mouse protocol extension" if EMBEDDED
+	default n
+	depends on MOUSE_PS2 && OLPC
+	---help---
+	  Say Y here if you have an OLPC PS/2 touchpad connected to
+	  your system.
+
+	  If unsure, say N.
+
 config MOUSE_SERIAL
 	tristate "Serial mouse"
 	select SERIO
diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index 9e6e363..f4654ce 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -24,3 +24,4 @@ psmouse-$(CONFIG_MOUSE_PS2_LOGIPS2PP)	+= logips2pp.o
 psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK)	+= lifebook.o
 psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT)	+= trackpoint.o
 psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT)	+= touchkit_ps2.o
+psmouse-$(CONFIG_MOUSE_PS2_OLPC)	+= olpc.o
diff --git a/drivers/input/mouse/olpc.c b/drivers/input/mouse/olpc.c
new file mode 100644
index 0000000..dc575ac
--- /dev/null
+++ b/drivers/input/mouse/olpc.c
@@ -0,0 +1,554 @@
+/*
+ * OLPC touchpad PS/2 mouse driver
+ *
+ * Copyright (c) 2006 One Laptop Per Child, inc.
+ * Authors Zephaniah E. Hull and Andres Salomon <dilinger@laptop.org>
+ *
+ * This driver is partly based on the ALPS driver, which is:
+ *
+ * Copyright (c) 2003 Neil Brown <neilb@cse.unsw.edu.au>
+ * Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com>
+ * Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru>
+ * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * The touchpad on the OLPC is fairly wide, with the entire area usable
+ * as a tablet ("PT mode"), and the center 1/3rd also usable as a touchpad
+ * ("GS mode").
+ *
+ * Earlier version of the device had simultaneous reporting; however, that
+ * was removed.  Instead, the device now reports packets in one mode, and
+ * tells the driver when a mode switch needs to happen.
+ */
+
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/libps2.h>
+#include <linux/delay.h>
+#include <asm/olpc.h>
+
+#include "psmouse.h"
+#include "olpc.h"
+
+static int tpdebug;
+module_param(tpdebug, int, 0644);
+
+#define OLPC_GS		1	/* The GS sensor. */
+#define OLPC_PT		2	/* The PT sensor. */
+
+static struct olpc_model_info olpc_model_data[] = {
+	{ { 0x67, 0x00, 0x00 }, OLPC_GS | OLPC_PT }, /* unknown ID */
+	{ { 0x67, 0x00, 0x0a }, OLPC_GS | OLPC_PT }, /* pre-B1 */
+	{ { 0x67, 0x00, 0x14 }, OLPC_GS }, /* B1.*/
+	{ { 0x67, 0x00, 0x28 }, OLPC_GS | OLPC_PT }, /* B2 */
+	{ { 0x67, 0x00, 0x3c }, OLPC_GS | OLPC_PT }, /* B2-2 */
+	{ { 0x67, 0x00, 0x50 }, OLPC_GS | OLPC_PT }, /* C1 */
+};
+
+#define OLPC_PKT_PT	0xcf
+#define OLPC_PKT_GS	0xff
+
+static int olpc_absolute_mode(struct psmouse *psmouse, int mode);
+
+/*
+ * OLPC absolute Mode - single-mode format
+ *
+ * byte 0:      1    1    0    0    1    1     1     1
+ * byte 1:      0   x6   x5   x4   x3   x2    x1    x0
+ * byte 2(PT):  0    0   x9   x8   x7    ? pt-dsw gs-dsw
+ * byte 2(GS):  0  x10   x9   x8   x7    ? gs-dsw pt-dsw
+ * byte 3:      0   y9   y8   y7    1    0   swr   swl
+ * byte 4:      0   y6   y5   y4   y3   y2    y1    y0
+ * byte 5:      0   z6   z5   z4   z3   z2    z1    z0
+ *
+ * ?'s are not defined in the protocol spec, may vary between models.
+ *
+ * swr/swl are the left/right buttons.
+ *
+ * pt-dsw/gs-dsw indicate that the pt/gs sensor is detecting a
+ * pen/finger
+ */
+
+static void olpc_process_packet_gspt(struct psmouse *psmouse)
+{
+	struct olpc_data *priv = psmouse->private;
+	unsigned char *packet = psmouse->packet;
+	struct input_dev *dev = psmouse->dev;
+	struct input_dev *dev2 = priv->dev2;
+	int x, y, z, gs_down = 0, pt_down = 0, left, right;
+	struct timeval now_tv;
+	s64 now_ns;
+
+	left = packet[3] & 1;
+	right = packet[3] & 2;
+	x = packet[1] | ((packet[2] & 0x78) << 4);
+	y = packet[4] | ((packet[3] & 0x70) << 3);
+	z = packet[5];
+
+	if (psmouse->packet[0] == OLPC_PKT_GS) {
+		pt_down = !!(packet[2] & 1);
+		gs_down = !!(packet[2] & 2);
+	} else if (psmouse->packet[0] == OLPC_PKT_PT) {
+		gs_down = !!(packet[2] & 1);
+		pt_down = !!(packet[2] & 2);
+	}
+
+	/*
+	 * XXX: Kludge.
+	 * If it's been more than 30ms since the last packet,
+	 * assume that there was a lift we were never told about.
+	 */
+	do_gettimeofday(&now_tv);
+	now_ns = timeval_to_ns (&now_tv);
+	if (now_ns >= priv->late) {
+		input_report_key(dev, BTN_TOUCH, 0);
+		input_report_key(dev, BTN_TOOL_PEN, 0);
+		input_report_key(dev2, BTN_TOUCH, 0);
+		input_report_key(dev2, BTN_TOOL_FINGER, 0);
+
+		input_sync(dev);
+		input_sync(dev2);
+	}
+
+	priv->late = now_ns + (30 * NSEC_PER_MSEC);
+
+
+	if (tpdebug) {
+		printk(KERN_DEBUG "%s %02x %02x %02x %02x %02x %02x\n",
+		       __FUNCTION__, psmouse->packet[0], psmouse->packet[1],
+		       psmouse->packet[2], psmouse->packet[3], psmouse->packet[4],
+		       psmouse->packet[5]);
+		printk(KERN_DEBUG "l=%d r=%d p=%d g=%d x=%d y=%d z=%d\n",
+		       left, right, pt_down, gs_down, x, y, z);
+	}
+
+	if (psmouse->packet[0] == OLPC_PKT_PT) {
+		input_report_key(dev, BTN_LEFT, left);
+		input_report_key(dev, BTN_RIGHT, right);
+	} else if (psmouse->packet[0] == OLPC_PKT_GS) {
+		input_report_key(dev, BTN_LEFT, left);
+		input_report_key(dev, BTN_RIGHT, right);
+		input_report_key(dev2, BTN_LEFT, left);
+		input_report_key(dev2, BTN_RIGHT, right);
+	}
+
+	input_report_key(dev, BTN_TOUCH, pt_down);
+	input_report_key(dev, BTN_TOOL_PEN, pt_down);
+	input_report_key(dev2, BTN_TOUCH, gs_down);
+	input_report_key(dev2, BTN_TOOL_FINGER, gs_down);
+
+	input_report_abs(dev2, ABS_PRESSURE, z);
+
+	if (psmouse->packet[0] == OLPC_PKT_PT && pt_down) {
+		input_report_abs(dev, ABS_X, x);
+		input_report_abs(dev, ABS_Y, y);
+	} else if (psmouse->packet[0] == OLPC_PKT_GS && gs_down) {
+		input_report_abs(dev2, ABS_X, x);
+		input_report_abs(dev2, ABS_Y, y);
+	}
+
+	input_sync(dev);
+	input_sync(dev2);
+
+	if (priv->pending_mode == OLPC_GS &&
+			psmouse->packet[0] == OLPC_PKT_PT && pt_down) {
+		priv->pending_mode = 0;
+		cancel_delayed_work(&priv->mode_switch);
+	}
+
+	if (priv->i->flags & (OLPC_PT|OLPC_GS)) {
+		int pending = 0;
+		if (psmouse->packet[0] == OLPC_PKT_PT && !pt_down)
+			pending = OLPC_GS;
+		else if (psmouse->packet[0] == OLPC_PKT_GS && pt_down)
+			pending = OLPC_PT;
+
+		if (priv->current_mode == pending) {
+			priv->pending_mode = 0;
+			pending = priv->current_mode;
+		}
+		else if (priv->pending_mode != pending) {
+			priv->pending_mode = pending;
+			if (tpdebug)
+				printk(KERN_WARNING "Scheduling mode switch to %s.\n",
+						pending == OLPC_GS ? "GS" : "PT");
+
+			/*
+			 * Apply a de-bounce when switching from PT to GS, to allow for
+			 * spurious PT-up packets.
+			 */
+			if (priv->pending_mode == OLPC_GS)
+				queue_delayed_work(kpsmoused_wq, &priv->mode_switch, msecs_to_jiffies(50));
+			else
+				queue_delayed_work(kpsmoused_wq, &priv->mode_switch, 0);
+		}
+	}
+}
+
+static psmouse_ret_t olpc_process_byte(struct psmouse *psmouse)
+{
+	psmouse_ret_t ret = PSMOUSE_BAD_DATA;
+
+	if (psmouse->packet[0] != OLPC_PKT_PT &&
+	    psmouse->packet[0] != OLPC_PKT_GS)
+		goto out;
+
+	/* Bytes 2 - 6 should have 0 in the highest bit */
+	if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= 6 &&
+			(psmouse->packet[psmouse->pktcnt - 1] & 0x80))
+		goto out;
+
+	if (psmouse->pktcnt == 6) {
+		olpc_process_packet_gspt(psmouse);
+		ret = PSMOUSE_FULL_PACKET;
+		goto out;
+	}
+
+	ret = PSMOUSE_GOOD_DATA;
+out:
+	if (ret != PSMOUSE_GOOD_DATA && ret != PSMOUSE_FULL_PACKET)
+		printk(KERN_DEBUG "%s: (%d) %02x %02x %02x %02x %02x %02x\n",
+		       __FUNCTION__, psmouse->pktcnt, psmouse->packet[0],
+			   psmouse->packet[1], psmouse->packet[2],
+			   psmouse->packet[3], psmouse->packet[4],
+		       psmouse->packet[5]);
+	return ret;
+}
+
+static struct olpc_model_info *olpc_get_model(struct psmouse *psmouse)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	unsigned char param[4];
+	int i;
+
+	/*
+	 * Now try "E7 report". Allowed responses are in
+	 * olpc_model_data[].signature
+	 */
+	if (ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE21) ||
+	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE21) ||
+	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE21))
+		return NULL;
+
+	param[0] = param[1] = param[2] = 0xff;
+	if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
+		return NULL;
+
+	pr_debug("olpc.c(%d): E7 report: %2.2x %2.2x %2.2x",
+		__LINE__, param[0], param[1], param[2]);
+
+	for (i = 0; i < ARRAY_SIZE(olpc_model_data); i++) {
+		if (!memcmp(param, olpc_model_data[i].signature,
+				sizeof(olpc_model_data[i].signature))) {
+			printk(KERN_INFO __FILE__ ": OLPC touchpad revision 0x%x.\n", param[2]);
+			return olpc_model_data + i;
+		}
+	}
+
+	/* 
+	 * ALPS creates new IDs pretty frequently; rather than listing them
+	 * all, just assume they support the defaults.  We've set aside the
+	 * first entry of olpc_model_data as the catch-all.
+	 */
+	if (!memcmp(param, olpc_model_data[0].signature, 2)) {
+		printk(KERN_INFO __FILE__ ": unknown ALPS revision %x, assuming default flags.\n", param[2]);
+		return &olpc_model_data[0];
+	}
+
+	return NULL;
+}
+
+static int olpc_find_mode(struct psmouse *psmouse)
+{
+	struct olpc_data *priv = psmouse->private;
+	int mode = priv->i->flags;
+
+	if (mode & OLPC_GS)
+		mode = OLPC_GS;
+	else if (mode & OLPC_PT)
+		mode = OLPC_PT;
+	else
+		mode = -1;
+
+	return mode;
+}
+
+/*
+ * Touchpad should be disabled before calling this!
+ */
+static int olpc_new_mode(struct psmouse *psmouse, int mode)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	struct olpc_data *priv = psmouse->private;
+	unsigned char param;
+	int ret;
+
+	if (tpdebug)
+		printk(KERN_WARNING __FILE__ ": Switching to %d. [%lu]\n", mode, jiffies);
+
+	if ((ret = ps2_command(ps2dev, &param, 0x01F2)))
+		goto failed;
+	if ((ret = ps2_command(ps2dev, &param, 0x01F2)))
+		goto failed;
+	if ((ret = ps2_command(ps2dev, &param, 0x01F2)))
+		goto failed;
+
+	switch (mode) {
+	default:
+		printk(KERN_WARNING __FILE__ ": Invalid mode %d. Defaulting to OLPC_GS.\n", mode);
+	case OLPC_GS:
+		ret = ps2_command(ps2dev, NULL, 0xE6);
+		break;
+	case OLPC_PT:
+		ret = ps2_command(ps2dev, NULL, 0xE7);
+		break;
+	}
+	if (ret)
+		goto failed;
+
+	/* XXX: This is a bit hacky, make sure this isn't screwing stuff up. */
+	psmouse->pktcnt = psmouse->out_of_sync = 0;
+	psmouse->last = jiffies;
+	psmouse->state = PSMOUSE_ACTIVATED;
+
+	if ((ret = ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)))
+		goto failed;
+
+	priv->current_mode = mode;
+	priv->pending_mode = 0;
+	if (tpdebug)
+		printk(KERN_WARNING __FILE__ ": Switched to mode %d successful.\n", mode);
+
+failed:
+	if (ret)
+		printk(KERN_WARNING __FILE__ ": Mode switch to %d failed! (%d) [%lu]\n", mode, ret, jiffies);
+	return ret;
+}
+
+static int olpc_absolute_mode(struct psmouse *psmouse, int mode)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+
+	/* Switch to 'Advanced mode.', four disables in a row. */
+	if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
+			ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
+			ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
+			ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE))
+		return -1;
+	
+	return olpc_new_mode(psmouse, mode);
+}
+
+/*
+ * olpc_poll() - poll the touchpad for current motion packet.
+ * Used in resync.
+ * Note: We can't poll, so always return failure.
+ */
+static int olpc_poll(struct psmouse *psmouse)
+{
+	return -1;
+}
+
+static int olpc_reconnect(struct psmouse *psmouse)
+{
+	struct olpc_data *priv = psmouse->private;
+	int mode;
+
+	if (olpc_rev_after(OLPC_REV_B2))
+		if (psmouse->ps2dev.serio->dev.power.power_state.event != PM_EVENT_ON)
+			return 0;
+
+	psmouse_reset(psmouse);
+
+	if (!(priv->i = olpc_get_model(psmouse)))
+		return -1;
+
+	mode = olpc_find_mode(psmouse);
+	if (mode < 0)
+		return -1;
+
+	if (olpc_absolute_mode(psmouse, mode)) {
+		printk(KERN_ERR __FILE__ ": Failed to reenable absolute mode.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static void olpc_disconnect(struct psmouse *psmouse)
+{
+	struct olpc_data *priv = psmouse->private;
+
+	psmouse_reset(psmouse);
+	input_unregister_device(priv->dev2);
+	kfree(priv);
+}
+
+static void olpc_mode_switch(struct work_struct *w)
+{
+	struct delayed_work *work = container_of(w, struct delayed_work, work);
+	struct olpc_data *priv = container_of(work, struct olpc_data, mode_switch);
+	struct psmouse *psmouse = priv->psmouse;
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	int pending_mode, ret;
+
+	if (priv->pending_mode == priv->current_mode) {
+		priv->pending_mode = 0;
+		printk (KERN_DEBUG __FILE__ ": In switch_mode, no target mode.\n");
+		return;
+	}
+
+	if (tpdebug)
+		printk(KERN_WARNING __FILE__ ": Disable for switch to %d. [%lu]\n", priv->pending_mode, jiffies);
+
+	/* XXX: This is a bit hacky, make sure this isn't screwing stuff up. */
+	psmouse->state = PSMOUSE_INITIALIZING;
+
+	ret = ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE);
+	if (ret) {
+		/* XXX: if this ever fails, we need to do a full reset! */
+		printk(KERN_WARNING __FILE__ ": Disable failed for switch to %d. (%d) [%lu]\n", priv->pending_mode, ret, jiffies);
+		return;
+	}
+
+	/*
+	 * ALPS tells us that it may take up to 20msec for the disable to
+	 * take effect; however, ps2_command() will wait up to 200msec for
+	 * the ACK to come back (and I'm assuming that by the time the
+	 * hardware sends back its ACK, it has stopped sending bytes).
+	 */
+	pending_mode = priv->pending_mode;
+
+	if (olpc_new_mode(psmouse, priv->pending_mode))
+		goto bad;
+
+	/*
+	 * Deal with a potential race condition.
+	 *
+	 * If there is a brief tap of a stylus or a fingernail that
+	 * triggers a mode switch to PT mode, and the stylus/fingernail is
+	 * lifted after the DISABLE above, but before we reenable in the new mode,
+	 * then we can get stuck in PT mode.
+	 */
+	if (pending_mode == OLPC_PT) {
+		priv->pending_mode = OLPC_GS;
+		queue_delayed_work(kpsmoused_wq, &priv->mode_switch, msecs_to_jiffies(50));
+	}
+
+	return;
+
+bad:
+	printk(KERN_WARNING __FILE__ ": Failure to switch modes, resetting device...\n");
+	olpc_reconnect(psmouse);
+}
+
+int olpc_init(struct psmouse *psmouse)
+{
+	struct olpc_data *priv;
+	struct input_dev *dev = psmouse->dev;
+	struct input_dev *dev2;
+	int mode;
+
+	priv = kzalloc(sizeof(struct olpc_data), GFP_KERNEL);
+	dev2 = input_allocate_device();
+	if (!priv || !dev2)
+		goto init_fail;
+
+	psmouse->private = priv;
+	priv->dev2 = dev2;
+	priv->psmouse = psmouse;
+
+	psmouse_reset(psmouse);
+	if (!(priv->i = olpc_get_model(psmouse)))
+		goto init_fail;
+
+	mode = olpc_find_mode(psmouse);
+	if (mode < 0) {
+		printk(KERN_ERR __FILE__ ": Failed to identify proper mode\n");
+		goto init_fail;
+	}
+
+	if (olpc_absolute_mode(psmouse, mode)) {
+		printk(KERN_ERR __FILE__ ": Failed to enable absolute mode\n");
+		goto init_fail;
+	}
+
+	/*
+	 * Unset some of the default bits for things we don't have.
+	 */
+	dev->evbit[LONG(EV_REL)] &= ~BIT(EV_REL);
+	dev->relbit[LONG(REL_X)] &= ~(BIT(REL_X) | BIT(REL_Y));
+	dev->keybit[LONG(BTN_MIDDLE)] &= ~BIT(BTN_MIDDLE);
+
+	dev->evbit[LONG(EV_KEY)] |= BIT(EV_KEY);
+	dev->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
+	dev->keybit[LONG(BTN_TOOL_PEN)] |= BIT(BTN_TOOL_PEN);
+	dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT);
+
+	dev->evbit[LONG(EV_ABS)] |= BIT(EV_ABS);
+	input_set_abs_params(dev, ABS_X, 2, 1000, 0, 0);
+	input_set_abs_params(dev, ABS_Y, 0, 717, 0, 0);
+
+	snprintf(priv->phys, sizeof(priv->phys),
+		"%s/input1", psmouse->ps2dev.serio->phys);
+	dev2->phys = priv->phys;
+	dev2->name = "OLPC ALPS GlideSensor";
+	dev2->id.bustype = BUS_I8042;
+	dev2->id.vendor  = 0x0002;
+	dev2->id.product = PSMOUSE_OLPC;
+	dev2->id.version = 0x0000;
+
+	dev2->evbit[LONG(EV_KEY)] |= BIT(EV_KEY);
+	dev2->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
+	dev2->keybit[LONG(BTN_TOOL_FINGER)] |= BIT(BTN_TOOL_FINGER);
+	dev2->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT);
+
+	dev2->evbit[LONG(EV_ABS)] |= BIT(EV_ABS);
+	input_set_abs_params(dev2, ABS_X, 350, 512, 0, 0);
+	input_set_abs_params(dev2, ABS_Y, 70, 325, 0, 0);
+	input_set_abs_params(dev2, ABS_PRESSURE, 0, 63, 0, 0);
+
+	if (input_register_device(dev2)) {
+		printk(KERN_ERR __FILE__ ": Failed to register GlideSensor\n");
+		goto init_fail;
+	}
+
+	psmouse->protocol_handler = olpc_process_byte;
+	psmouse->poll = olpc_poll;
+	psmouse->disconnect = olpc_disconnect;
+	psmouse->reconnect = olpc_reconnect;
+	psmouse->pktsize = 6;
+
+	/* Disable the idle resync. */
+	psmouse->resync_time = 0;
+	/* Reset after a lot of bad bytes. */
+	psmouse->resetafter = 1024;
+
+	INIT_DELAYED_WORK(&priv->mode_switch, olpc_mode_switch);
+
+	return 0;
+
+init_fail:
+	input_free_device(dev2);
+	kfree(priv);
+	return -1;
+}
+
+int olpc_detect(struct psmouse *psmouse, int set_properties)
+{
+	if (!olpc_get_model(psmouse))
+		return -1;
+
+	if (set_properties) {
+		psmouse->vendor = "ALPS";
+		psmouse->name = "PenTablet";
+		psmouse->model = 0;
+	}
+	return 0;
+}
+
diff --git a/drivers/input/mouse/olpc.h b/drivers/input/mouse/olpc.h
new file mode 100644
index 0000000..426f8b4
--- /dev/null
+++ b/drivers/input/mouse/olpc.h
@@ -0,0 +1,49 @@
+/*
+ * OLPC touchpad PS/2 mouse driver
+ *
+ * Copyright (c) 2006 One Laptop Per Child, inc.
+ *
+ * This driver is partly based on the ALPS driver.
+ * Copyright (c) 2003 Peter Osterlund <petero2@telia.com>
+ * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _OLPC_H
+#define _OLPC_H
+
+struct olpc_model_info {
+	unsigned char signature[3];
+	unsigned char flags;
+};
+
+struct olpc_data {
+	struct input_dev *dev2;		/* Relative device */
+	struct psmouse *psmouse;
+	char name[32];			/* Name */
+	char phys[32];			/* Phys */
+	struct olpc_model_info *i; /* Info */
+	int pending_mode;
+	int current_mode;
+	s64 late;
+	struct delayed_work mode_switch;
+};
+
+#ifdef CONFIG_MOUSE_PS2_OLPC
+int olpc_detect(struct psmouse *psmouse, int set_properties);
+int olpc_init(struct psmouse *psmouse);
+#else
+inline int olpc_detect(struct psmouse *psmouse, int set_properties)
+{
+	return -ENOSYS;
+}
+inline int olpc_init(struct psmouse *psmouse)
+{
+	return -ENOSYS;
+}
+#endif
+
+#endif
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index b9f0fb2..edcdb68 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -26,6 +26,7 @@
 #include "synaptics.h"
 #include "logips2pp.h"
 #include "alps.h"
+#include "olpc.h"
 #include "lifebook.h"
 #include "trackpoint.h"
 #include "touchkit_ps2.h"
@@ -103,7 +104,7 @@ static struct attribute_group psmouse_attribute_group = {
  */
 static DEFINE_MUTEX(psmouse_mutex);
 
-static struct workqueue_struct *kpsmoused_wq;
+struct workqueue_struct *kpsmoused_wq;
 
 struct psmouse_protocol {
 	enum psmouse_type type;
@@ -320,7 +321,7 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
 			goto out;
 		}
 
-		if (psmouse->packet[1] == PSMOUSE_RET_ID) {
+		if (psmouse->packet[1] == PSMOUSE_RET_ID || psmouse->packet[1] == PSMOUSE_RET_BAT) {
 			__psmouse_set_state(psmouse, PSMOUSE_IGNORE);
 			serio_reconnect(serio);
 			goto out;
@@ -631,8 +632,21 @@ static int psmouse_extensions(struct psmouse *psmouse,
 		}
 	}
 
+/*
+ * Try OLPC touchpad.
+ */
 	if (max_proto > PSMOUSE_IMEX) {
+		if (olpc_detect(psmouse, set_properties) == 0) {
+			if (!set_properties || olpc_init(psmouse) == 0)
+				return PSMOUSE_OLPC;
+/*
+ * Init failed, try basic relative protocols
+ */
+			max_proto = PSMOUSE_IMEX;
+		}
+	}
 
+	if (max_proto > PSMOUSE_IMEX) {
 		if (genius_detect(psmouse, set_properties) == 0)
 			return PSMOUSE_GENPS;
 
@@ -762,6 +776,14 @@ static const struct psmouse_protocol psmouse_protocols[] = {
 		.detect		= touchkit_ps2_detect,
 	},
 #endif
+#ifdef CONFIG_MOUSE_PS2_OLPC
+	{
+		.type		= PSMOUSE_OLPC,
+		.name		= "OLPC",
+		.alias		= "olpc",
+		.detect		= olpc_detect,
+	},
+#endif
 	{
 		.type		= PSMOUSE_CORTRON,
 		.name		= "CortronPS/2",
diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h
index 1317bdd..c4857df 100644
--- a/drivers/input/mouse/psmouse.h
+++ b/drivers/input/mouse/psmouse.h
@@ -89,6 +89,7 @@ enum psmouse_type {
 	PSMOUSE_TRACKPOINT,
 	PSMOUSE_TOUCHKIT_PS2,
 	PSMOUSE_CORTRON,
+	PSMOUSE_OLPC,
 	PSMOUSE_AUTO		/* This one should always be last */
 };
 
@@ -96,6 +97,7 @@ int psmouse_sliced_command(struct psmouse *psmouse, unsigned char command);
 int psmouse_reset(struct psmouse *psmouse);
 void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution);
 
+extern struct workqueue_struct *kpsmoused_wq;
 
 struct psmouse_attribute {
 	struct device_attribute dattr;
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index c2eea27..3510726 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -868,6 +868,11 @@ static long i8042_panic_blink(long count)
 #undef DELAY
 
 #ifdef CONFIG_PM
+
+#ifdef CONFIG_OLPC
+#include <asm/olpc.h>
+#endif
+
 /*
  * Here we try to restore the original BIOS settings. We only want to
  * do that once, when we really suspend, not when we taking memory
@@ -878,8 +883,15 @@ static long i8042_panic_blink(long count)
 static int i8042_suspend(struct platform_device *dev, pm_message_t state)
 {
 	if (dev->dev.power.power_state.event != state.event) {
+#ifdef CONFIG_OLPC
+		/* Anything newer than B2 remains powered; no reset needed */
+		if (olpc_rev_before(OLPC_REV_PRE_B3)) {
+#endif
 		if (state.event == PM_EVENT_SUSPEND)
 			i8042_controller_reset();
+#ifdef CONFIG_OLPC
+		}
+#endif
 
 		dev->dev.power.power_state = state;
 	}
@@ -902,9 +914,15 @@ static int i8042_resume(struct platform_device *dev)
 	if (dev->dev.power.power_state.event == PM_EVENT_ON)
 		return 0;
 
+#ifdef CONFIG_OLPC
+	if (olpc_rev_before(OLPC_REV_PRE_B3)) {
+#endif
 	error = i8042_controller_check();
 	if (error)
 		return error;
+#ifdef CONFIG_OLPC
+	}
+#endif
 
 	error = i8042_controller_selftest();
 	if (error)
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index 372ca49..c9e5308 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -916,11 +916,22 @@ static int serio_uevent(struct device *dev, char **envp, int num_envp, char *buf
 #endif /* CONFIG_HOTPLUG */
 
 #ifdef CONFIG_PM
+
+#ifdef CONFIG_OLPC
+#include <asm/olpc.h>
+#endif
+
 static int serio_suspend(struct device *dev, pm_message_t state)
 {
 	if (dev->power.power_state.event != state.event) {
+#ifdef CONFIG_OLPC
+		if (olpc_rev_before(OLPC_REV_PRE_B3)) {
+#endif
 		if (state.event == PM_EVENT_SUSPEND)
 			serio_cleanup(to_serio_port(dev));
+#ifdef CONFIG_OLPC
+		}
+#endif
 
 		dev->power.power_state = state;
 	}
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index ef53618..47881d2 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -63,13 +63,13 @@ MODULE_SUPPORTED_DEVICE("Video");
  */
 
 #define MAX_DMA_BUFS 3
-static int alloc_bufs_at_load = 0;
-module_param(alloc_bufs_at_load, bool, 0444);
-MODULE_PARM_DESC(alloc_bufs_at_load,
-		"Non-zero value causes DMA buffers to be allocated at module "
-		"load time.  This increases the chances of successfully getting "
-		"those buffers, but at the cost of nailing down the memory from "
-		"the outset.");
+static int alloc_bufs_at_read = 0;
+module_param(alloc_bufs_at_read, bool, 0444);
+MODULE_PARM_DESC(alloc_bufs_at_read,
+		"Non-zero value causes DMA buffers to be allocated when the "
+		"video capture device is read, rather than at module load "
+		"time.  This saves memory, but decreases the chances of "
+		"successfully getting those buffers.");
 
 static int n_dma_bufs = 3;
 module_param(n_dma_bufs, uint, 0644);
@@ -370,6 +370,10 @@ static int cafe_smbus_write_data(struct cafe_camera *cam,
 	rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR);
 	cafe_reg_write(cam, REG_TWSIC1, rval);
 	spin_unlock_irqrestore(&cam->dev_lock, flags);
+	mdelay(2); /* It'll probably take about 900µs anyway, and the
+		      CAFÉ is apparently quite sensitive to being poked
+		      at this point. If we can work out precisely what's
+		      going on and reduce this delay, it would be nice. */
 
 	/*
 	 * Time to wait for the write to complete.  THIS IS A RACY
@@ -1503,7 +1507,7 @@ static int cafe_v4l_release(struct inode *inode, struct file *filp)
 	}
 	if (cam->users == 0) {
 		cafe_ctlr_power_down(cam);
-		if (! alloc_bufs_at_load)
+		if (alloc_bufs_at_read)
 			cafe_free_dma_bufs(cam);
 	}
 	mutex_unlock(&cam->s_mutex);
@@ -2162,7 +2166,7 @@ static int cafe_pci_probe(struct pci_dev *pdev,
 	/*
 	 * If so requested, try to get our DMA buffers now.
 	 */
-	if (alloc_bufs_at_load) {
+	if (!alloc_bufs_at_read) {
 		if (cafe_alloc_dma_bufs(cam, 1))
 			cam_warn(cam, "Unable to alloc DMA buffers at load"
 					" will try again later.");
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 73e248f..f7afde3 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -202,5 +202,10 @@ config THINKPAD_ACPI_BAY
 
 	  If you are not sure, say Y here.
 
+config EEPROM_93CX6
+	tristate "EEPROM 93CX6 support"
+	---help---
+	  This is a driver for the EEPROM chipsets 93c46 and 93c66.
+	  The driver supports both read as well as write commands.
 
 endif # MISC_DEVICES
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 93fe2e5..e17eb8e 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -229,6 +229,11 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 		if (brq.data.blocks > card->host->max_blk_count)
 			brq.data.blocks = card->host->max_blk_count;
 
+		if (mmc_card_sd(card) && !card->host->ios.clock) {
+			printk(KERN_ERR "%s: I/O to stopped card\n",
+			       req->rq_disk->disk_name);
+			goto cmd_err;
+		}
 		mmc_set_data_timeout(&brq.data, card, rq_data_dir(req) != READ);
 
 		/*
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 20a7d89..9abbb58 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -411,6 +411,12 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
 			break;
 	}
 
+	/*
+	 * There's an off-by-one error in the hw that we need to
+	 * compensate for.
+	 */
+	count++;
+
 	if (count >= 0xF) {
 		printk(KERN_WARNING "%s: Too large timeout requested!\n",
 			mmc_hostname(host->mmc));
@@ -676,19 +682,17 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 	if (!(host->chip->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
 		writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
 
-	pwr = SDHCI_POWER_ON;
-
 	switch (1 << power) {
 	case MMC_VDD_165_195:
-		pwr |= SDHCI_POWER_180;
+		pwr = SDHCI_POWER_180;
 		break;
 	case MMC_VDD_29_30:
 	case MMC_VDD_30_31:
-		pwr |= SDHCI_POWER_300;
+		pwr = SDHCI_POWER_300;
 		break;
 	case MMC_VDD_32_33:
 	case MMC_VDD_33_34:
-		pwr |= SDHCI_POWER_330;
+		pwr = SDHCI_POWER_330;
 		break;
 	default:
 		BUG();
@@ -696,6 +700,10 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 
 	writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
 
+	pwr |= SDHCI_POWER_ON;
+
+	writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
+
 out:
 	host->power = power;
 }
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index fbec8cd..8848e8a 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -278,6 +278,14 @@ config SSFDC
 	  This enables read only access to SmartMedia formatted NAND
 	  flash. You can mount it with FAT file system.
 
+config MTD_OOPS
+	tristate "Log panic/oops to an MTD buffer"
+	depends on MTD
+	help
+	  This enables panic and oops messages to be logged to a circular
+	  buffer in a flash partition where it can be read back at some
+	  later point.
+
 source "drivers/mtd/chips/Kconfig"
 
 source "drivers/mtd/maps/Kconfig"
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 6d958a4..7f0b04b 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_NFTL)		+= nftl.o
 obj-$(CONFIG_INFTL)		+= inftl.o
 obj-$(CONFIG_RFD_FTL)		+= rfd_ftl.o
 obj-$(CONFIG_SSFDC)		+= ssfdc.o
+obj-$(CONFIG_MTD_OOPS)		+= mtdoops.o
 
 nftl-objs		:= nftlcore.o nftlmount.o
 inftl-objs		:= inftlcore.o inftlmount.o
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 2f19fa7..39eff9f 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -526,7 +526,7 @@ static int cfi_intelext_partition_fixup(struct mtd_info *mtd,
 	struct cfi_pri_intelext *extp = cfi->cmdset_priv;
 
 	/*
-	 * Probing of multi-partition flash ships.
+	 * Probing of multi-partition flash chips.
 	 *
 	 * To support multiple partitions when available, we simply arrange
 	 * for each of them to have their own flchip structure even if they
@@ -1780,7 +1780,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
 	return ret;
 }
 
-int cfi_intelext_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
+static int cfi_intelext_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
 {
 	unsigned long ofs, len;
 	int ret;
@@ -1930,7 +1930,7 @@ static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
 	printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n",
 	       __FUNCTION__, ofs, len);
 	cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
-		ofs, len, 0);
+		ofs, len, NULL);
 #endif
 
 	ret = cfi_varsize_frob(mtd, do_xxlock_oneblock,
@@ -1940,7 +1940,7 @@ static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
 	printk(KERN_DEBUG "%s: lock status after, ret=%d\n",
 	       __FUNCTION__, ret);
 	cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
-		ofs, len, 0);
+		ofs, len, NULL);
 #endif
 
 	return ret;
@@ -1954,7 +1954,7 @@ static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
 	printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n",
 	       __FUNCTION__, ofs, len);
 	cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
-		ofs, len, 0);
+		ofs, len, NULL);
 #endif
 
 	ret = cfi_varsize_frob(mtd, do_xxlock_oneblock,
@@ -1964,7 +1964,7 @@ static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
 	printk(KERN_DEBUG "%s: lock status after, ret=%d\n",
 	       __FUNCTION__, ret);
 	cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
-		ofs, len, 0);
+		ofs, len, NULL);
 #endif
 
 	return ret;
@@ -2255,7 +2255,7 @@ static void cfi_intelext_save_locks(struct mtd_info *mtd)
 			adr = region->offset + block * len;
 
 			status = cfi_varsize_frob(mtd,
-					do_getlockstatus_oneblock, adr, len, 0);
+					do_getlockstatus_oneblock, adr, len, NULL);
 			if (status)
 				set_bit(block, region->lockmap);
 			else
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 1f64458..389acc6 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1609,7 +1609,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
 }
 
 
-int cfi_amdstd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
+static int cfi_amdstd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
 {
 	unsigned long ofs, len;
 	int ret;
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index 58e561e..593e9d6 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -70,6 +70,7 @@
 
 /* Fujitsu */
 #define MBM29F040C	0x00A4
+#define MBM29F800BA	0x2258
 #define MBM29LV650UE	0x22D7
 #define MBM29LV320TE	0x22F6
 #define MBM29LV320BE	0x22F9
@@ -129,6 +130,7 @@
 #define LH28F640BF	0x00b0
 
 /* ST - www.st.com */
+#define M29F800AB	0x0058
 #define M29W800DT	0x00D7
 #define M29W800DB	0x005B
 #define M29W160DT	0x22C4
@@ -646,6 +648,23 @@ static const struct amd_flash_info jedec_table[] = {
 		}
 	}, {
 		.mfr_id		= MANUFACTURER_FUJITSU,
+		.dev_id		= MBM29F800BA,
+		.name		= "Fujitsu MBM29F800BA",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x10000,15),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_FUJITSU,
 		.dev_id		= MBM29LV650UE,
 		.name		= "Fujitsu MBM29LV650UE",
 		.uaddr		= {
@@ -1510,6 +1529,23 @@ static const struct amd_flash_info jedec_table[] = {
                        ERASEINFO(0x1000,256)
                }
 
+	}, {
+		.mfr_id		= MANUFACTURER_ST,
+		.dev_id		= M29F800AB,
+		.name		= "ST M29F800AB",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x10000,15),
+		}
        }, {
 		.mfr_id		= MANUFACTURER_ST,	/* FIXME - CFI device? */
 		.dev_id		= M29W800DT,
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index ff642f8..b4ea64d 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -69,12 +69,21 @@ config MTD_DATAFLASH26
 	  If you have such a board and such a DataFlash, say 'Y'.
 
 config MTD_M25P80
-	tristate "Support for M25 SPI Flash"
+	tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
 	depends on SPI_MASTER && EXPERIMENTAL
 	help
-	  This enables access to ST M25P80 and similar SPI flash chips,
-	  used for program and data storage.  Set up your spi devices
-	  with the right board-specific platform data.
+	  This enables access to most modern SPI flash chips, used for
+	  program and data storage.   Series supported include Atmel AT26DF,
+	  Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X.  Other chips
+	  are supported as well.  See the driver source for the current list,
+	  or to add other chips.
+
+	  Note that the original DataFlash chips (AT45 series, not AT26DF),
+	  need an entirely different driver.
+
+	  Set up your spi devices with the right board-specific platform data,
+	  if you want to specify device partitioning or to use a device which
+	  doesn't support the JEDEC ID instruction.
 
 config MTD_SLRAM
 	tristate "Uncached system RAM"
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 78c2511..98df5bc 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -1,5 +1,5 @@
 /*
- * MTD SPI driver for ST M25Pxx flash chips
+ * MTD SPI driver for ST M25Pxx (and similar) serial flash chips
  *
  * Author: Mike Lavender, mike@steroidmicros.com
  *
@@ -19,33 +19,32 @@
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
-#include <linux/interrupt.h>
+#include <linux/mutex.h>
+
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 
-#include <asm/semaphore.h>
-
-
-/* NOTE: AT 25F and SST 25LF series are very similar,
- * but commands for sector erase and chip id differ...
- */
 
 #define FLASH_PAGESIZE		256
 
 /* Flash opcodes. */
-#define	OPCODE_WREN		6	/* Write enable */
-#define	OPCODE_RDSR		5	/* Read status register */
-#define	OPCODE_READ		3	/* Read data bytes */
-#define	OPCODE_PP		2	/* Page program */
-#define	OPCODE_SE		0xd8	/* Sector erase */
-#define	OPCODE_RES		0xab	/* Read Electronic Signature */
+#define	OPCODE_WREN		0x06	/* Write enable */
+#define	OPCODE_RDSR		0x05	/* Read status register */
+#define	OPCODE_READ		0x03	/* Read data bytes (low frequency) */
+#define	OPCODE_FAST_READ	0x0b	/* Read data bytes (high frequency) */
+#define	OPCODE_PP		0x02	/* Page program (up to 256 bytes) */
+#define	OPCODE_BE_4K 		0x20	/* Erase 4KiB block */
+#define	OPCODE_BE_32K		0x52	/* Erase 32KiB block */
+#define	OPCODE_SE		0xd8	/* Sector erase (usually 64KiB) */
 #define	OPCODE_RDID		0x9f	/* Read JEDEC ID */
 
 /* Status Register bits. */
 #define	SR_WIP			1	/* Write in progress */
 #define	SR_WEL			2	/* Write enable latch */
+/* meaning of other SR_* bits may differ between vendors */
 #define	SR_BP0			4	/* Block protect 0 */
 #define	SR_BP1			8	/* Block protect 1 */
 #define	SR_BP2			0x10	/* Block protect 2 */
@@ -65,9 +64,10 @@
 
 struct m25p {
 	struct spi_device	*spi;
-	struct semaphore	lock;
+	struct mutex		lock;
 	struct mtd_info		mtd;
-	unsigned		partitioned;
+	unsigned		partitioned:1;
+	u8			erase_opcode;
 	u8			command[4];
 };
 
@@ -150,8 +150,9 @@ static int wait_till_ready(struct m25p *flash)
  */
 static int erase_sector(struct m25p *flash, u32 offset)
 {
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: %s at 0x%08x\n", flash->spi->dev.bus_id,
-			__FUNCTION__, offset);
+	DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB at 0x%08x\n",
+			flash->spi->dev.bus_id, __FUNCTION__,
+			flash->mtd.erasesize / 1024, offset);
 
 	/* Wait until finished previous write command. */
 	if (wait_till_ready(flash))
@@ -161,7 +162,7 @@ static int erase_sector(struct m25p *flash, u32 offset)
 	write_enable(flash);
 
 	/* Set up command buffer. */
-	flash->command[0] = OPCODE_SE;
+	flash->command[0] = flash->erase_opcode;
 	flash->command[1] = offset >> 16;
 	flash->command[2] = offset >> 8;
 	flash->command[3] = offset;
@@ -201,13 +202,17 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr)
 	addr = instr->addr;
 	len = instr->len;
 
-  	down(&flash->lock);
+	mutex_lock(&flash->lock);
+
+	/* REVISIT in some cases we could speed up erasing large regions
+	 * by using OPCODE_SE instead of OPCODE_BE_4K
+	 */
 
 	/* now erase those sectors */
 	while (len) {
 		if (erase_sector(flash, addr)) {
 			instr->state = MTD_ERASE_FAILED;
-			up(&flash->lock);
+			mutex_unlock(&flash->lock);
 			return -EIO;
 		}
 
@@ -215,7 +220,7 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr)
 		len -= mtd->erasesize;
 	}
 
-  	up(&flash->lock);
+	mutex_unlock(&flash->lock);
 
 	instr->state = MTD_ERASE_DONE;
 	mtd_erase_callback(instr);
@@ -260,16 +265,19 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
 	if (retlen)
 		*retlen = 0;
 
-	down(&flash->lock);
+	mutex_lock(&flash->lock);
 
 	/* Wait till previous write/erase is done. */
 	if (wait_till_ready(flash)) {
 		/* REVISIT status return?? */
-		up(&flash->lock);
+		mutex_unlock(&flash->lock);
 		return 1;
 	}
 
-	/* NOTE:  OPCODE_FAST_READ (if available) is faster... */
+	/* FIXME switch to OPCODE_FAST_READ.  It's required for higher
+	 * clocks; and at this writing, every chip this driver handles
+	 * supports that opcode.
+	 */
 
 	/* Set up the write data buffer. */
 	flash->command[0] = OPCODE_READ;
@@ -281,7 +289,7 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
 
 	*retlen = m.actual_length - sizeof(flash->command);
 
-  	up(&flash->lock);
+	mutex_unlock(&flash->lock);
 
 	return 0;
 }
@@ -323,7 +331,7 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
 	t[1].tx_buf = buf;
 	spi_message_add_tail(&t[1], &m);
 
-  	down(&flash->lock);
+	mutex_lock(&flash->lock);
 
 	/* Wait until finished previous write command. */
 	if (wait_till_ready(flash))
@@ -381,10 +389,10 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
 			if (retlen)
 				*retlen += m.actual_length
 					- sizeof(flash->command);
-	        }
- 	}
+		}
+	}
 
-	up(&flash->lock);
+	mutex_unlock(&flash->lock);
 
 	return 0;
 }
@@ -398,24 +406,118 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
 
 struct flash_info {
 	char		*name;
-	u8		id;
-	u16		jedec_id;
+
+	/* JEDEC id zero means "no ID" (most older chips); otherwise it has
+	 * a high byte of zero plus three data bytes: the manufacturer id,
+	 * then a two byte device id.
+	 */
+	u32		jedec_id;
+
+	/* The size listed here is what works with OPCODE_SE, which isn't
+	 * necessarily called a "sector" by the vendor.
+	 */
 	unsigned	sector_size;
-	unsigned	n_sectors;
+	u16		n_sectors;
+
+	u16		flags;
+#define	SECT_4K		0x01		/* OPCODE_BE_4K works uniformly */
 };
 
+
+/* NOTE: double check command sets and memory organization when you add
+ * more flash chips.  This current list focusses on newer chips, which
+ * have been converging on command sets which including JEDEC ID.
+ */
 static struct flash_info __devinitdata m25p_data [] = {
-	/* REVISIT: fill in JEDEC ids, for parts that have them */
-	{ "m25p05", 0x05, 0x2010, 32 * 1024, 2 },
-	{ "m25p10", 0x10, 0x2011, 32 * 1024, 4 },
-	{ "m25p20", 0x11, 0x2012, 64 * 1024, 4 },
-	{ "m25p40", 0x12, 0x2013, 64 * 1024, 8 },
-	{ "m25p80", 0x13, 0x0000, 64 * 1024, 16 },
-	{ "m25p16", 0x14, 0x2015, 64 * 1024, 32 },
-	{ "m25p32", 0x15, 0x2016, 64 * 1024, 64 },
-	{ "m25p64", 0x16, 0x2017, 64 * 1024, 128 },
+
+	/* Atmel -- some are (confusingly) marketed as "DataFlash" */
+	{ "at25fs010",  0x1f6601, 32 * 1024, 4, SECT_4K, },
+	{ "at25fs040",  0x1f6604, 64 * 1024, 8, SECT_4K, },
+
+	{ "at25df041a", 0x1f4401, 64 * 1024, 8, SECT_4K, },
+
+	{ "at26f004",   0x1f0400, 64 * 1024, 8, SECT_4K, },
+	{ "at26df081a", 0x1f4501, 64 * 1024, 16, SECT_4K, },
+	{ "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, },
+	{ "at26df321",  0x1f4701, 64 * 1024, 64, SECT_4K, },
+
+	/* Spansion -- single (large) sector size only, at least
+	 * for the chips listed here (without boot sectors).
+	 */
+	{ "s25sl004a", 0x010212, 64 * 1024, 8, },
+	{ "s25sl008a", 0x010213, 64 * 1024, 16, },
+	{ "s25sl016a", 0x010214, 64 * 1024, 32, },
+	{ "s25sl032a", 0x010215, 64 * 1024, 64, },
+	{ "s25sl064a", 0x010216, 64 * 1024, 128, },
+
+	/* SST -- large erase sizes are "overlays", "sectors" are 4K */
+	{ "sst25vf040b", 0xbf258d, 64 * 1024, 8, SECT_4K, },
+	{ "sst25vf080b", 0xbf258e, 64 * 1024, 16, SECT_4K, },
+	{ "sst25vf016b", 0xbf2541, 64 * 1024, 32, SECT_4K, },
+	{ "sst25vf032b", 0xbf254a, 64 * 1024, 64, SECT_4K, },
+
+	/* ST Microelectronics -- newer production may have feature updates */
+	{ "m25p05",  0x202010,  32 * 1024, 2, },
+	{ "m25p10",  0x202011,  32 * 1024, 4, },
+	{ "m25p20",  0x202012,  64 * 1024, 4, },
+	{ "m25p40",  0x202013,  64 * 1024, 8, },
+	{ "m25p80",         0,  64 * 1024, 16, },
+	{ "m25p16",  0x202015,  64 * 1024, 32, },
+	{ "m25p32",  0x202016,  64 * 1024, 64, },
+	{ "m25p64",  0x202017,  64 * 1024, 128, },
+	{ "m25p128", 0x202018, 256 * 1024, 64, },
+
+	{ "m45pe80", 0x204014,  64 * 1024, 16, },
+	{ "m45pe16", 0x204015,  64 * 1024, 32, },
+
+	{ "m25pe80", 0x208014,  64 * 1024, 16, },
+	{ "m25pe16", 0x208015,  64 * 1024, 32, SECT_4K, },
+
+	/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
+	{ "w25x10", 0xef3011, 64 * 1024, 2, SECT_4K, },
+	{ "w25x20", 0xef3012, 64 * 1024, 4, SECT_4K, },
+	{ "w25x40", 0xef3013, 64 * 1024, 8, SECT_4K, },
+	{ "w25x80", 0xef3014, 64 * 1024, 16, SECT_4K, },
+	{ "w25x16", 0xef3015, 64 * 1024, 32, SECT_4K, },
+	{ "w25x32", 0xef3016, 64 * 1024, 64, SECT_4K, },
+	{ "w25x64", 0xef3017, 64 * 1024, 128, SECT_4K, },
 };
 
+static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
+{
+	int			tmp;
+	u8			code = OPCODE_RDID;
+	u8			id[3];
+	u32			jedec;
+	struct flash_info	*info;
+
+	/* JEDEC also defines an optional "extended device information"
+	 * string for after vendor-specific data, after the three bytes
+	 * we use here.  Supporting some chips might require using it.
+	 */
+	tmp = spi_write_then_read(spi, &code, 1, id, 3);
+	if (tmp < 0) {
+		DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
+			spi->dev.bus_id, tmp);
+		return NULL;
+	}
+	jedec = id[0];
+	jedec = jedec << 8;
+	jedec |= id[1];
+	jedec = jedec << 8;
+	jedec |= id[2];
+
+	for (tmp = 0, info = m25p_data;
+			tmp < ARRAY_SIZE(m25p_data);
+			tmp++, info++) {
+		if (info->jedec_id == jedec)
+			return info;
+	}
+	dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec);
+	return NULL;
+}
+
+
 /*
  * board specific setup should have ensured the SPI clock used here
  * matches what the READ command supports, at least until this driver
@@ -429,37 +531,51 @@ static int __devinit m25p_probe(struct spi_device *spi)
 	unsigned			i;
 
 	/* Platform data helps sort out which chip type we have, as
-	 * well as how this board partitions it.
+	 * well as how this board partitions it.  If we don't have
+	 * a chip ID, try the JEDEC id commands; they'll work for most
+	 * newer chips, even if we don't recognize the particular chip.
 	 */
 	data = spi->dev.platform_data;
-	if (!data || !data->type) {
-		/* FIXME some chips can identify themselves with RES
-		 * or JEDEC get-id commands.  Try them ...
-		 */
-		DEBUG(MTD_DEBUG_LEVEL1, "%s: no chip id\n",
-				spi->dev.bus_id);
-		return -ENODEV;
-	}
+	if (data && data->type) {
+		for (i = 0, info = m25p_data;
+				i < ARRAY_SIZE(m25p_data);
+				i++, info++) {
+			if (strcmp(data->type, info->name) == 0)
+				break;
+		}
 
-	for (i = 0, info = m25p_data; i < ARRAY_SIZE(m25p_data); i++, info++) {
-		if (strcmp(data->type, info->name) == 0)
-			break;
-	}
-	if (i == ARRAY_SIZE(m25p_data)) {
-		DEBUG(MTD_DEBUG_LEVEL1, "%s: unrecognized id %s\n",
-				spi->dev.bus_id, data->type);
+		/* unrecognized chip? */
+		if (i == ARRAY_SIZE(m25p_data)) {
+			DEBUG(MTD_DEBUG_LEVEL0, "%s: unrecognized id %s\n",
+					spi->dev.bus_id, data->type);
+			info = NULL;
+
+		/* recognized; is that chip really what's there? */
+		} else if (info->jedec_id) {
+			struct flash_info	*chip = jedec_probe(spi);
+
+			if (!chip || chip != info) {
+				dev_warn(&spi->dev, "found %s, expected %s\n",
+						chip ? chip->name : "UNKNOWN",
+						info->name);
+				info = NULL;
+			}
+		}
+	} else
+		info = jedec_probe(spi);
+
+	if (!info)
 		return -ENODEV;
-	}
 
 	flash = kzalloc(sizeof *flash, GFP_KERNEL);
 	if (!flash)
 		return -ENOMEM;
 
 	flash->spi = spi;
-	init_MUTEX(&flash->lock);
+	mutex_init(&flash->lock);
 	dev_set_drvdata(&spi->dev, flash);
 
-	if (data->name)
+	if (data && data->name)
 		flash->mtd.name = data->name;
 	else
 		flash->mtd.name = spi->dev.bus_id;
@@ -468,17 +584,25 @@ static int __devinit m25p_probe(struct spi_device *spi)
 	flash->mtd.writesize = 1;
 	flash->mtd.flags = MTD_CAP_NORFLASH;
 	flash->mtd.size = info->sector_size * info->n_sectors;
-	flash->mtd.erasesize = info->sector_size;
 	flash->mtd.erase = m25p80_erase;
 	flash->mtd.read = m25p80_read;
 	flash->mtd.write = m25p80_write;
 
+	/* prefer "small sector" erase if possible */
+	if (info->flags & SECT_4K) {
+		flash->erase_opcode = OPCODE_BE_4K;
+		flash->mtd.erasesize = 4096;
+	} else {
+		flash->erase_opcode = OPCODE_SE;
+		flash->mtd.erasesize = info->sector_size;
+	}
+
 	dev_info(&spi->dev, "%s (%d Kbytes)\n", info->name,
 			flash->mtd.size / 1024);
 
 	DEBUG(MTD_DEBUG_LEVEL2,
-		"mtd .name = %s, .size = 0x%.8x (%uM) "
-			".erasesize = 0x%.8x (%uK) .numeraseregions = %d\n",
+		"mtd .name = %s, .size = 0x%.8x (%uMiB) "
+			".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
 		flash->mtd.name,
 		flash->mtd.size, flash->mtd.size / (1024*1024),
 		flash->mtd.erasesize, flash->mtd.erasesize / 1024,
@@ -488,7 +612,7 @@ static int __devinit m25p_probe(struct spi_device *spi)
 		for (i = 0; i < flash->mtd.numeraseregions; i++)
 			DEBUG(MTD_DEBUG_LEVEL2,
 				"mtd.eraseregions[%d] = { .offset = 0x%.8x, "
-				".erasesize = 0x%.8x (%uK), "
+				".erasesize = 0x%.8x (%uKiB), "
 				".numblocks = %d }\n",
 				i, flash->mtd.eraseregions[i].offset,
 				flash->mtd.eraseregions[i].erasesize,
@@ -516,14 +640,14 @@ static int __devinit m25p_probe(struct spi_device *spi)
 		}
 
 		if (nr_parts > 0) {
-			for (i = 0; i < data->nr_parts; i++) {
+			for (i = 0; i < nr_parts; i++) {
 				DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
 					"{.name = %s, .offset = 0x%.8x, "
-						".size = 0x%.8x (%uK) }\n",
-					i, data->parts[i].name,
-					data->parts[i].offset,
-					data->parts[i].size,
-					data->parts[i].size / 1024);
+						".size = 0x%.8x (%uKiB) }\n",
+					i, parts[i].name,
+					parts[i].offset,
+					parts[i].size,
+					parts[i].size / 1024);
 			}
 			flash->partitioned = 1;
 			return add_mtd_partitions(&flash->mtd, parts, nr_parts);
@@ -560,6 +684,11 @@ static struct spi_driver m25p80_driver = {
 	},
 	.probe	= m25p_probe,
 	.remove	= __devexit_p(m25p_remove),
+
+	/* REVISIT: many of these chips have deep power-down modes, which
+	 * should clearly be entered on suspend() to minimize power use.
+	 * And also when they're otherwise idle...
+	 */
 };
 
 
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index a987e91..a5ed6d2 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -14,6 +14,7 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/mutex.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 
@@ -89,7 +90,7 @@ struct dataflash {
 	unsigned short		page_offset;	/* offset in flash address */
 	unsigned int		page_size;	/* of bytes per page */
 
-	struct semaphore	lock;
+	struct mutex		lock;
 	struct spi_device	*spi;
 
 	struct mtd_info		mtd;
@@ -167,7 +168,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
 	x.len = 4;
 	spi_message_add_tail(&x, &msg);
 
-	down(&priv->lock);
+	mutex_lock(&priv->lock);
 	while (instr->len > 0) {
 		unsigned int	pageaddr;
 		int		status;
@@ -210,7 +211,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
 			instr->len -= priv->page_size;
 		}
 	}
-	up(&priv->lock);
+	mutex_unlock(&priv->lock);
 
 	/* Inform MTD subsystem that erase is complete */
 	instr->state = MTD_ERASE_DONE;
@@ -266,7 +267,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
 	x[1].len = len;
 	spi_message_add_tail(&x[1], &msg);
 
-	down(&priv->lock);
+	mutex_lock(&priv->lock);
 
 	/* Continuous read, max clock = f(car) which may be less than
 	 * the peak rate available.  Some chips support commands with
@@ -279,7 +280,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
 	/* plus 4 "don't care" bytes */
 
 	status = spi_sync(priv->spi, &msg);
-	up(&priv->lock);
+	mutex_unlock(&priv->lock);
 
 	if (status >= 0) {
 		*retlen = msg.actual_length - 8;
@@ -336,7 +337,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 	else
 		writelen = len;
 
-	down(&priv->lock);
+	mutex_lock(&priv->lock);
 	while (remaining > 0) {
 		DEBUG(MTD_DEBUG_LEVEL3, "write @ %i:%i len=%i\n",
 			pageaddr, offset, writelen);
@@ -441,7 +442,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 		else
 			writelen = remaining;
 	}
-	up(&priv->lock);
+	mutex_unlock(&priv->lock);
 
 	return status;
 }
@@ -463,7 +464,7 @@ add_dataflash(struct spi_device *spi, char *name,
 	if (!priv)
 		return -ENOMEM;
 
-	init_MUTEX(&priv->lock);
+	mutex_init(&priv->lock);
 	priv->spi = spi;
 	priv->page_size = pagesize;
 	priv->page_offset = pageoffset;
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index e8f686f..7060a08 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -30,8 +30,8 @@
  *
  * Notes:
  *	Due to what I assume is more buggy SROM, the 64M PMC551 I
- *	have available claims that all 4 of it's DRAM banks have 64M
- *	of ram configured (making a grand total of 256M onboard).
+ *	have available claims that all 4 of its DRAM banks have 64MiB
+ *	of ram configured (making a grand total of 256MiB onboard).
  *	This is slightly annoying since the BAR0 size reflects the
  *	aperture size, not the dram size, and the V370PDC supplies no
  *	other method for memory size discovery.  This problem is
@@ -70,7 +70,7 @@
  *	 made the memory unusable, added a fix to code to touch up
  *	 the DRAM some.
  *
- * Bugs/FIXME's:
+ * Bugs/FIXMEs:
  *	* MUST fix the init function to not spin on a register
  *	waiting for it to set .. this does not safely handle busted
  *	devices that never reset the register correctly which will
@@ -562,10 +562,10 @@ static u32 fixup_pmc551(struct pci_dev *dev)
 	/*
 	 * Some screen fun
 	 */
-	printk(KERN_DEBUG "pmc551: %d%c (0x%x) of %sprefetchable memory at "
+	printk(KERN_DEBUG "pmc551: %d%sB (0x%x) of %sprefetchable memory at "
 		"0x%llx\n", (size < 1024) ? size : (size < 1048576) ?
 		size >> 10 : size >> 20,
-		(size < 1024) ? 'B' : (size < 1048576) ? 'K' : 'M', size,
+		(size < 1024) ? "" : (size < 1048576) ? "Ki" : "Mi", size,
 		((dcmd & (0x1 << 3)) == 0) ? "non-" : "",
 		(unsigned long long)pci_resource_start(dev, 0));
 
@@ -649,14 +649,10 @@ MODULE_DESCRIPTION(PMC551_VERSION);
  * Stuff these outside the ifdef so as to not bust compiled in driver support
  */
 static int msize = 0;
-#if defined(CONFIG_MTD_PMC551_APERTURE_SIZE)
-static int asize = CONFIG_MTD_PMC551_APERTURE_SIZE;
-#else
 static int asize = 0;
-#endif
 
 module_param(msize, int, 0);
-MODULE_PARM_DESC(msize, "memory size in Megabytes [1 - 1024]");
+MODULE_PARM_DESC(msize, "memory size in MiB [1 - 1024]");
 module_param(asize, int, 0);
 MODULE_PARM_DESC(asize, "aperture size, must be <= memsize [1-1024]");
 
@@ -799,8 +795,7 @@ static int __init init_pmc551(void)
 		mtd->owner = THIS_MODULE;
 
 		if (add_mtd_device(mtd)) {
-			printk(KERN_NOTICE "pmc551: Failed to register new "
-				"device\n");
+			printk(KERN_NOTICE "pmc551: Failed to register new device\n");
 			pci_iounmap(PCI_Device, priv->start);
 			kfree(mtd->priv);
 			kfree(mtd);
@@ -811,13 +806,13 @@ static int __init init_pmc551(void)
 		pci_dev_get(PCI_Device);
 
 		printk(KERN_NOTICE "Registered pmc551 memory device.\n");
-		printk(KERN_NOTICE "Mapped %dM of memory from 0x%p to 0x%p\n",
+		printk(KERN_NOTICE "Mapped %dMiB of memory from 0x%p to 0x%p\n",
 			priv->asize >> 20,
 			priv->start, priv->start + priv->asize);
-		printk(KERN_NOTICE "Total memory is %d%c\n",
+		printk(KERN_NOTICE "Total memory is %d%sB\n",
 			(length < 1024) ? length :
 			(length < 1048576) ? length >> 10 : length >> 20,
-			(length < 1024) ? 'B' : (length < 1048576) ? 'K' : 'M');
+			(length < 1024) ? "" : (length < 1048576) ? "Ki" : "Mi");
 		priv->nextpmc551 = pmc551list;
 		pmc551list = mtd;
 		found++;
@@ -850,7 +845,7 @@ static void __exit cleanup_pmc551(void)
 		pmc551list = priv->nextpmc551;
 
 		if (priv->start) {
-			printk(KERN_DEBUG "pmc551: unmapping %dM starting at "
+			printk(KERN_DEBUG "pmc551: unmapping %dMiB starting at "
 				"0x%p\n", priv->asize >> 20, priv->start);
 			pci_iounmap(priv->dev, priv->start);
 		}
diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c
index 7b96cd0..0c9b305 100644
--- a/drivers/mtd/maps/nettel.c
+++ b/drivers/mtd/maps/nettel.c
@@ -158,68 +158,11 @@ static struct notifier_block nettel_notifier_block = {
 	nettel_reboot_notifier, NULL, 0
 };
 
-/*
- *	Erase the configuration file system.
- *	Used to support the software reset button.
- */
-static void nettel_erasecallback(struct erase_info *done)
-{
-	wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
-	wake_up(wait_q);
-}
-
-static struct erase_info nettel_erase;
-
-int nettel_eraseconfig(void)
-{
-	struct mtd_info *mtd;
-	DECLARE_WAITQUEUE(wait, current);
-	wait_queue_head_t wait_q;
-	int ret;
-
-	init_waitqueue_head(&wait_q);
-	mtd = get_mtd_device(NULL, 2);
-	if (!IS_ERR(mtd)) {
-		nettel_erase.mtd = mtd;
-		nettel_erase.callback = nettel_erasecallback;
-		nettel_erase.callback = NULL;
-		nettel_erase.addr = 0;
-		nettel_erase.len = mtd->size;
-		nettel_erase.priv = (u_long) &wait_q;
-		nettel_erase.priv = 0;
-
-		set_current_state(TASK_INTERRUPTIBLE);
-		add_wait_queue(&wait_q, &wait);
-
-		ret = mtd->erase(mtd, &nettel_erase);
-		if (ret) {
-			set_current_state(TASK_RUNNING);
-			remove_wait_queue(&wait_q, &wait);
-			put_mtd_device(mtd);
-			return(ret);
-		}
-
-		schedule();  /* Wait for erase to finish. */
-		remove_wait_queue(&wait_q, &wait);
-
-		put_mtd_device(mtd);
-	}
-
-	return(0);
-}
-
-#else
-
-int nettel_eraseconfig(void)
-{
-	return(0);
-}
-
 #endif
 
 /****************************************************************************/
 
-int __init nettel_init(void)
+static int __init nettel_init(void)
 {
 	volatile unsigned long *amdpar;
 	unsigned long amdaddr, maxsize;
@@ -421,10 +364,6 @@ int __init nettel_init(void)
 
 	intel_mtd->owner = THIS_MODULE;
 
-#ifndef CONFIG_BLK_DEV_INITRD
-	ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, 1);
-#endif
-
 	num_intel_partitions = sizeof(nettel_intel_partitions) /
 		sizeof(nettel_intel_partitions[0]);
 
@@ -477,7 +416,7 @@ out_unmap2:
 
 /****************************************************************************/
 
-void __exit nettel_cleanup(void)
+static void __exit nettel_cleanup(void)
 {
 #ifdef CONFIG_MTD_CFI_INTELEXT
 	unregister_reboot_notifier(&nettel_notifier_block);
diff --git a/drivers/mtd/maps/pmcmsp-ramroot.c b/drivers/mtd/maps/pmcmsp-ramroot.c
index 18049bc..30de5c0 100644
--- a/drivers/mtd/maps/pmcmsp-ramroot.c
+++ b/drivers/mtd/maps/pmcmsp-ramroot.c
@@ -79,7 +79,6 @@ static int __init init_rrmap(void)
 		rr_mtd->owner = THIS_MODULE;
 
 		add_mtd_device(rr_mtd);
-		ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, rr_mtd->index);
 
 		return 0;
 	}
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index ef89780..74d9d30 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -24,10 +24,9 @@
 #include <linux/kthread.h>
 #include <asm/uaccess.h>
 
-static LIST_HEAD(blktrans_majors);
+#include "mtdcore.h"
 
-extern struct mutex mtd_table_mutex;
-extern struct mtd_info *mtd_table[];
+static LIST_HEAD(blktrans_majors);
 
 struct mtd_blkcore_priv {
 	struct task_struct *thread;
@@ -202,7 +201,7 @@ static int blktrans_ioctl(struct inode *inode, struct file *file,
 	}
 }
 
-struct block_device_operations mtd_blktrans_ops = {
+static struct block_device_operations mtd_blktrans_ops = {
 	.owner		= THIS_MODULE,
 	.open		= blktrans_open,
 	.release	= blktrans_release,
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index d091b24..22ed96c 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -136,7 +136,8 @@ static int mtd_close(struct inode *inode, struct file *file)
 
 	DEBUG(MTD_DEBUG_LEVEL0, "MTD_close\n");
 
-	if (mtd->sync)
+	/* Only sync if opened RW */
+	if ((file->f_mode & 2) && mtd->sync)
 		mtd->sync(mtd);
 
 	put_mtd_device(mtd);
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index c153b64..6c2645e 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -22,6 +22,8 @@
 
 #include <linux/mtd/mtd.h>
 
+#include "mtdcore.h"
+
 /* These are exported solely for the purpose of mtd_blkdevs.c. You
    should not use them for _anything_ else */
 DEFINE_MUTEX(mtd_table_mutex);
diff --git a/drivers/mtd/mtdcore.h b/drivers/mtd/mtdcore.h
new file mode 100644
index 0000000..a33251f
--- /dev/null
+++ b/drivers/mtd/mtdcore.h
@@ -0,0 +1,11 @@
+/* linux/drivers/mtd/mtdcore.h
+ *
+ * Header file for driver private mtdcore exports
+ *
+ */
+
+/* These are exported solely for the purpose of mtd_blkdevs.c. You
+   should not use them for _anything_ else */
+
+extern struct mutex mtd_table_mutex;
+extern struct mtd_info *mtd_table[MAX_MTD_DEVICES];
diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c
new file mode 100644
index 0000000..cfc28ab
--- /dev/null
+++ b/drivers/mtd/mtdoops.c
@@ -0,0 +1,365 @@
+/*
+ * MTD Oops/Panic logger
+ *
+ * Copyright (C) 2007 Nokia Corporation. All rights reserved.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/vmalloc.h>
+#include <linux/workqueue.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/mtd/mtd.h>
+
+#define OOPS_PAGE_SIZE 4096
+
+static struct mtdoops_context {
+	int mtd_index;
+	struct work_struct work;
+	struct mtd_info *mtd;
+	int oops_pages;
+	int nextpage;
+	int nextcount;
+
+	void *oops_buf;
+	int ready;
+	int writecount;
+} oops_cxt;
+
+static void mtdoops_erase_callback(struct erase_info *done)
+{
+	wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
+	wake_up(wait_q);
+}
+
+static int mtdoops_erase_block(struct mtd_info *mtd, int offset)
+{
+	struct erase_info erase;
+	DECLARE_WAITQUEUE(wait, current);
+	wait_queue_head_t wait_q;
+	int ret;
+
+	init_waitqueue_head(&wait_q);
+	erase.mtd = mtd;
+	erase.callback = mtdoops_erase_callback;
+	erase.addr = offset;
+	if (mtd->erasesize < OOPS_PAGE_SIZE)
+		erase.len = OOPS_PAGE_SIZE;
+	else
+		erase.len = mtd->erasesize;
+	erase.priv = (u_long)&wait_q;
+
+	set_current_state(TASK_INTERRUPTIBLE);
+	add_wait_queue(&wait_q, &wait);
+
+	ret = mtd->erase(mtd, &erase);
+	if (ret) {
+		set_current_state(TASK_RUNNING);
+		remove_wait_queue(&wait_q, &wait);
+		printk (KERN_WARNING "mtdoops: erase of region [0x%x, 0x%x] "
+				     "on \"%s\" failed\n",
+			erase.addr, erase.len, mtd->name);
+		return ret;
+	}
+
+	schedule();  /* Wait for erase to finish. */
+	remove_wait_queue(&wait_q, &wait);
+
+	return 0;
+}
+
+static int mtdoops_inc_counter(struct mtdoops_context *cxt)
+{
+	struct mtd_info *mtd = cxt->mtd;
+	size_t retlen;
+	u32 count;
+	int ret;
+
+	cxt->nextpage++;
+	if (cxt->nextpage > cxt->oops_pages)
+		cxt->nextpage = 0;
+	cxt->nextcount++;
+	if (cxt->nextcount == 0xffffffff)
+		cxt->nextcount = 0;
+
+	ret = mtd->read(mtd, cxt->nextpage * OOPS_PAGE_SIZE, 4,
+			&retlen, (u_char *) &count);
+	if ((retlen != 4) || (ret < 0)) {
+		printk(KERN_ERR "mtdoops: Read failure at %d (%d of 4 read)"
+				", err %d.\n", cxt->nextpage * OOPS_PAGE_SIZE,
+				retlen, ret);
+		return 1;
+	}
+
+	/* See if we need to erase the next block */
+	if (count != 0xffffffff)
+		return 1;
+
+	printk(KERN_DEBUG "mtdoops: Ready %d, %d (no erase)\n",
+			cxt->nextpage, cxt->nextcount);
+	cxt->ready = 1;
+	return 0;
+}
+
+static void mtdoops_prepare(struct mtdoops_context *cxt)
+{
+	struct mtd_info *mtd = cxt->mtd;
+	int i = 0, j, ret, mod;
+
+	/* We were unregistered */
+	if (!mtd)
+		return;
+
+	mod = (cxt->nextpage * OOPS_PAGE_SIZE) % mtd->erasesize;
+	if (mod != 0) {
+		cxt->nextpage = cxt->nextpage + ((mtd->erasesize - mod) / OOPS_PAGE_SIZE);
+		if (cxt->nextpage > cxt->oops_pages)
+			cxt->nextpage = 0;
+	}
+
+	while (mtd->block_isbad &&
+			mtd->block_isbad(mtd, cxt->nextpage * OOPS_PAGE_SIZE)) {
+badblock:
+		printk(KERN_WARNING "mtdoops: Bad block at %08x\n",
+				cxt->nextpage * OOPS_PAGE_SIZE);
+		i++;
+		cxt->nextpage = cxt->nextpage + (mtd->erasesize / OOPS_PAGE_SIZE);
+		if (cxt->nextpage > cxt->oops_pages)
+			cxt->nextpage = 0;
+		if (i == (cxt->oops_pages / (mtd->erasesize / OOPS_PAGE_SIZE))) {
+			printk(KERN_ERR "mtdoops: All blocks bad!\n");
+			return;
+		}
+	}
+
+	for (j = 0, ret = -1; (j < 3) && (ret < 0); j++)
+		ret = mtdoops_erase_block(mtd, cxt->nextpage * OOPS_PAGE_SIZE);
+
+	if (ret < 0) {
+		if (mtd->block_markbad)
+			mtd->block_markbad(mtd, cxt->nextpage * OOPS_PAGE_SIZE);
+		goto badblock;
+	}
+
+	printk(KERN_DEBUG "mtdoops: Ready %d, %d \n", cxt->nextpage, cxt->nextcount);
+
+	cxt->ready = 1;
+}
+
+static void mtdoops_workfunc(struct work_struct *work)
+{
+	struct mtdoops_context *cxt =
+			container_of(work, struct mtdoops_context, work);
+
+	mtdoops_prepare(cxt);
+}
+
+static int find_next_position(struct mtdoops_context *cxt)
+{
+	struct mtd_info *mtd = cxt->mtd;
+	int page, maxpos = 0;
+	u32 count, maxcount = 0xffffffff;
+	size_t retlen;
+
+	for (page = 0; page < cxt->oops_pages; page++) {
+		mtd->read(mtd, page * OOPS_PAGE_SIZE, 4, &retlen, (u_char *) &count);
+		if (count == 0xffffffff)
+			continue;
+		if (maxcount == 0xffffffff) {
+			maxcount = count;
+			maxpos = page;
+		} else if ((count < 0x40000000) && (maxcount > 0xc0000000)) {
+			maxcount = count;
+			maxpos = page;
+		} else if ((count > maxcount) && (count < 0xc0000000)) {
+			maxcount = count;
+			maxpos = page;
+		} else if ((count > maxcount) && (count > 0xc0000000)
+					&& (maxcount > 0x80000000)) {
+			maxcount = count;
+			maxpos = page;
+		}
+	}
+	if (maxcount == 0xffffffff) {
+		cxt->nextpage = 0;
+		cxt->nextcount = 1;
+		cxt->ready = 1;
+		printk(KERN_DEBUG "mtdoops: Ready %d, %d (first init)\n",
+				cxt->nextpage, cxt->nextcount);
+		return 0;
+	}
+
+	cxt->nextpage = maxpos;
+	cxt->nextcount = maxcount;
+
+	return mtdoops_inc_counter(cxt);
+}
+
+
+static void mtdoops_notify_add(struct mtd_info *mtd)
+{
+	struct mtdoops_context *cxt = &oops_cxt;
+	int ret;
+
+	if ((mtd->index != cxt->mtd_index) || cxt->mtd_index < 0)
+		return;
+
+	if (mtd->size < (mtd->erasesize * 2)) {
+		printk(KERN_ERR "MTD partition %d not big enough for mtdoops\n",
+				mtd->index);
+		return;
+	}
+
+	cxt->mtd = mtd;
+	cxt->oops_pages = mtd->size / OOPS_PAGE_SIZE;
+
+	ret = find_next_position(cxt);
+	if (ret == 1)
+		mtdoops_prepare(cxt);
+
+	printk(KERN_DEBUG "mtdoops: Attached to MTD device %d\n", mtd->index);
+}
+
+static void mtdoops_notify_remove(struct mtd_info *mtd)
+{
+	struct mtdoops_context *cxt = &oops_cxt;
+
+	if ((mtd->index != cxt->mtd_index) || cxt->mtd_index < 0)
+		return;
+
+	cxt->mtd = NULL;
+	flush_scheduled_work();
+}
+
+
+static void
+mtdoops_console_write(struct console *co, const char *s, unsigned int count)
+{
+	struct mtdoops_context *cxt = co->data;
+	struct mtd_info *mtd = cxt->mtd;
+	int i, ret;
+
+	if (!cxt->ready || !mtd)
+		return;
+
+	if (!oops_in_progress && cxt->writecount != 0) {
+		size_t retlen;
+		if (cxt->writecount < OOPS_PAGE_SIZE)
+			memset(cxt->oops_buf + cxt->writecount, 0xff,
+					OOPS_PAGE_SIZE - cxt->writecount);
+
+		ret = mtd->write(mtd, cxt->nextpage * OOPS_PAGE_SIZE,
+					OOPS_PAGE_SIZE, &retlen, cxt->oops_buf);
+		cxt->ready = 0;
+		cxt->writecount = 0;
+
+		if ((retlen != OOPS_PAGE_SIZE) || (ret < 0))
+			printk(KERN_ERR "mtdoops: Write failure at %d (%d of %d"
+				" written), err %d.\n",
+				cxt->nextpage * OOPS_PAGE_SIZE, retlen,
+				OOPS_PAGE_SIZE, ret);
+
+		ret = mtdoops_inc_counter(cxt);
+		if (ret == 1)
+			schedule_work(&cxt->work);
+	}
+
+	if (!oops_in_progress)
+		return;
+
+	if (cxt->writecount == 0) {
+		u32 *stamp = cxt->oops_buf;
+		*stamp = cxt->nextcount;
+		cxt->writecount = 4;
+	}
+
+	if ((count + cxt->writecount) > OOPS_PAGE_SIZE)
+		count = OOPS_PAGE_SIZE - cxt->writecount;
+
+	for (i = 0; i < count; i++, s++)
+		*((char *)(cxt->oops_buf) + cxt->writecount + i) = *s;
+
+	cxt->writecount = cxt->writecount + count;
+}
+
+static int __init mtdoops_console_setup(struct console *co, char *options)
+{
+	struct mtdoops_context *cxt = co->data;
+
+	if (cxt->mtd_index != -1)
+		return -EBUSY;
+	if (co->index == -1)
+		return -EINVAL;
+
+	cxt->mtd_index = co->index;
+	return 0;
+}
+
+static struct mtd_notifier mtdoops_notifier = {
+	.add	= mtdoops_notify_add,
+	.remove	= mtdoops_notify_remove,
+};
+
+static struct console mtdoops_console = {
+	.name		= "ttyMTD",
+	.write		= mtdoops_console_write,
+	.setup		= mtdoops_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+	.data		= &oops_cxt,
+};
+
+static int __init mtdoops_console_init(void)
+{
+	struct mtdoops_context *cxt = &oops_cxt;
+
+	cxt->mtd_index = -1;
+	cxt->oops_buf = vmalloc(OOPS_PAGE_SIZE);
+
+	if (!cxt->oops_buf) {
+		printk(KERN_ERR "Failed to allocate oops buffer workspace\n");
+		return -ENOMEM;
+	}
+
+	INIT_WORK(&cxt->work, mtdoops_workfunc);
+
+	register_console(&mtdoops_console);
+	register_mtd_user(&mtdoops_notifier);
+	return 0;
+}
+
+static void __exit mtdoops_console_exit(void)
+{
+	struct mtdoops_context *cxt = &oops_cxt;
+
+	unregister_mtd_user(&mtdoops_notifier);
+	unregister_console(&mtdoops_console);
+	vfree(cxt->oops_buf);
+}
+
+
+subsys_initcall(mtdoops_console_init);
+module_exit(mtdoops_console_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
+MODULE_DESCRIPTION("MTD Oops/Panic console logger/driver");
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index f1d60b6..df25cab 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -134,10 +134,10 @@ config MTD_NAND_S3C2410_HWECC
 
 config MTD_NAND_NDFC
 	tristate "NDFC NanD Flash Controller"
-	depends on 44x
+	depends on 4xx
 	select MTD_NAND_ECC_SMC
 	help
-	 NDFC Nand Flash Controllers are integrated in EP44x SoCs
+	 NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
 
 config MTD_NAND_S3C2410_CLKSTOP
 	bool "S3C2410 NAND IDLE clock stop"
@@ -237,7 +237,7 @@ config MTD_NAND_CAFE
 	select REED_SOLOMON
 	select REED_SOLOMON_DEC16
 	help
-	  Use NAND flash attached to the CAFÉ chip designed for the $100
+	  Use NAND flash attached to the CAFÉ chip designed for the OLPC
 	  laptop.
 
 config MTD_NAND_CS553X
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index cff969d..cca69b3 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -821,14 +821,53 @@ static struct pci_device_id cafe_nand_tbl[] = {
 
 MODULE_DEVICE_TABLE(pci, cafe_nand_tbl);
 
+static int cafe_nand_resume(struct pci_dev *pdev)
+{
+	uint32_t timing1, timing2, timing3;
+	uint32_t ctrl;
+	struct mtd_info *mtd = pci_get_drvdata(pdev);
+	struct cafe_priv *cafe = mtd->priv;
+
+	timing1 = timing2 = timing3 = 0xffffffff;
+       /* Start off by resetting the NAND controller completely */
+	cafe_writel(cafe, 1, NAND_RESET);
+	cafe_writel(cafe, 0, NAND_RESET);
+	cafe_writel(cafe, timing1, NAND_TIMING1);
+	cafe_writel(cafe, timing2, NAND_TIMING2);
+	cafe_writel(cafe, timing3, NAND_TIMING3);
+	cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK);
+
+        /* Disable master reset, enable NAND clock */
+	ctrl = cafe_readl(cafe, GLOBAL_CTRL);
+	ctrl &= 0xffffeff0;
+	ctrl |= 0x00007000;
+	cafe_writel(cafe, ctrl | 0x05, GLOBAL_CTRL);
+	cafe_writel(cafe, ctrl | 0x0a, GLOBAL_CTRL);
+	cafe_writel(cafe, 0, NAND_DMA_CTRL);
+	cafe_writel(cafe, 0x7006, GLOBAL_CTRL);
+	cafe_writel(cafe, 0x700a, GLOBAL_CTRL);
+
+	/* Set up DMA address */
+	cafe_writel(cafe, cafe->dmaaddr & 0xffffffff, NAND_DMA_ADDR0);
+	if (sizeof(cafe->dmaaddr) > 4)
+	/* Shift in two parts to shut the compiler up */
+		cafe_writel(cafe, (cafe->dmaaddr >> 16) >> 16, NAND_DMA_ADDR1);
+	else
+		cafe_writel(cafe, 0, NAND_DMA_ADDR1);
+
+	/* Enable NAND IRQ in global IRQ mask register */
+	cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK);
+	return 0;
+}
+
 static struct pci_driver cafe_nand_pci_driver = {
 	.name = "CAFÉ NAND",
 	.id_table = cafe_nand_tbl,
 	.probe = cafe_nand_probe,
 	.remove = __devexit_p(cafe_nand_remove),
+	.resume = cafe_nand_resume,
 #ifdef CONFIG_PMx
 	.suspend = cafe_nand_suspend,
-	.resume = cafe_nand_resume,
 #endif
 };
 
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index fd7a8d5..1c0e89f 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -24,7 +24,11 @@
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
+#ifdef CONFIG_40x
+#include <asm/ibm405.h>
+#else
 #include <asm/ibm44x.h>
+#endif
 
 struct ndfc_nand_mtd {
 	struct mtd_info			mtd;
@@ -230,7 +234,11 @@ static int ndfc_nand_probe(struct platform_device *pdev)
 	struct ndfc_controller *ndfc = &ndfc_ctrl;
 	unsigned long long phys = settings->ndfc_erpn | res->start;
 
+#ifndef CONFIG_PHYS_64BIT
+	ndfc->ndfcbase = ioremap((phys_addr_t)phys, res->end - res->start + 1);
+#else
 	ndfc->ndfcbase = ioremap64(phys, res->end - res->start + 1);
+#endif
 	if (!ndfc->ndfcbase) {
 		printk(KERN_ERR "NDFC: ioremap failed\n");
 		return -EIO;
diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index c257d39..cb41cbc 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -40,4 +40,27 @@ config MTD_ONENAND_OTP
 
 	  OTP block is fully-guaranteed to be a valid block.
 
+config MTD_ONENAND_2X_PROGRAM
+	bool "OneNAND 2X program support"
+	help
+	  The 2X Program is an extension of Program Operation.
+	  Since the device is equipped with two DataRAMs, and two-plane NAND
+	  Flash memory array, these two component enables simultaneous program
+	  of 4KiB. Plane1 has only even blocks such as block0, block2, block4
+	  while Plane2 has only odd blocks such as block1, block3, block5.
+	  So MTD regards it as 4KiB page size and 256KiB block size
+
+	  Now the following chips support it. (KFXXX16Q2M)
+	    Demux: KFG2G16Q2M, KFH4G16Q2M, KFW8G16Q2M,
+	    Mux:   KFM2G16Q2M, KFN4G16Q2M,
+
+	  And more recent chips
+
+config MTD_ONENAND_SIM
+	tristate "OneNAND simulator support"
+	depends on MTD_PARTITIONS
+	help
+	  The simulator may simulate various OneNAND flash chips for the
+	  OneNAND MTD layer.
+
 endif # MTD_ONENAND
diff --git a/drivers/mtd/onenand/Makefile b/drivers/mtd/onenand/Makefile
index 269cfe4..4d2eacf 100644
--- a/drivers/mtd/onenand/Makefile
+++ b/drivers/mtd/onenand/Makefile
@@ -8,4 +8,7 @@ obj-$(CONFIG_MTD_ONENAND)		+= onenand.o
 # Board specific.
 obj-$(CONFIG_MTD_ONENAND_GENERIC)	+= generic.o
 
+# Simulator
+obj-$(CONFIG_MTD_ONENAND_SIM)		+= onenand_sim.o
+
 onenand-objs = onenand_base.o onenand_bbt.o
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 0537fac..7d194cf 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -206,6 +206,15 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
 	default:
 		block = (int) (addr >> this->erase_shift);
 		page = (int) (addr >> this->page_shift);
+
+		if (ONENAND_IS_2PLANE(this)) {
+			/* Make the even block number */
+			block &= ~1;
+			/* Is it the odd plane? */
+			if (addr & this->writesize)
+				block++;
+			page >>= 1;
+		}
 		page &= this->page_mask;
 		break;
 	}
@@ -216,8 +225,12 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
 		value = onenand_bufferram_address(this, block);
 		this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
 
-		/* Switch to the next data buffer */
-		ONENAND_SET_NEXT_BUFFERRAM(this);
+		if (ONENAND_IS_2PLANE(this))
+			/* It is always BufferRAM0 */
+			ONENAND_SET_BUFFERRAM0(this);
+		else
+			/* Switch to the next data buffer */
+			ONENAND_SET_NEXT_BUFFERRAM(this);
 
 		return 0;
 	}
@@ -247,6 +260,8 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
 			break;
 
 		default:
+			if (ONENAND_IS_2PLANE(this) && cmd == ONENAND_CMD_PROG)
+				cmd = ONENAND_CMD_2X_PROG;
 			dataram = ONENAND_CURRENT_BUFFERRAM(this);
 			break;
 		}
@@ -445,8 +460,9 @@ static inline int onenand_bufferram_offset(struct mtd_info *mtd, int area)
 	struct onenand_chip *this = mtd->priv;
 
 	if (ONENAND_CURRENT_BUFFERRAM(this)) {
+		/* Note: the 'this->writesize' is a real page size */
 		if (area == ONENAND_DATARAM)
-			return mtd->writesize;
+			return this->writesize;
 		if (area == ONENAND_SPARERAM)
 			return mtd->oobsize;
 	}
@@ -572,6 +588,30 @@ static int onenand_write_bufferram(struct mtd_info *mtd, int area,
 }
 
 /**
+ * onenand_get_2x_blockpage - [GENERIC] Get blockpage at 2x program mode
+ * @param mtd		MTD data structure
+ * @param addr		address to check
+ * @return		blockpage address
+ *
+ * Get blockpage address at 2x program mode
+ */
+static int onenand_get_2x_blockpage(struct mtd_info *mtd, loff_t addr)
+{
+	struct onenand_chip *this = mtd->priv;
+	int blockpage, block, page;
+
+	/* Calculate the even block number */
+	block = (int) (addr >> this->erase_shift) & ~1;
+	/* Is it the odd plane? */
+	if (addr & this->writesize)
+		block++;
+	page = (int) (addr >> (this->page_shift + 1)) & this->page_mask;
+	blockpage = (block << 7) | page;
+
+	return blockpage;
+}
+
+/**
  * onenand_check_bufferram - [GENERIC] Check BufferRAM information
  * @param mtd		MTD data structure
  * @param addr		address to check
@@ -585,7 +625,10 @@ static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)
 	int blockpage, found = 0;
 	unsigned int i;
 
-	blockpage = (int) (addr >> this->page_shift);
+	if (ONENAND_IS_2PLANE(this))
+		blockpage = onenand_get_2x_blockpage(mtd, addr);
+	else
+		blockpage = (int) (addr >> this->page_shift);
 
 	/* Is there valid data? */
 	i = ONENAND_CURRENT_BUFFERRAM(this);
@@ -625,7 +668,10 @@ static void onenand_update_bufferram(struct mtd_info *mtd, loff_t addr,
 	int blockpage;
 	unsigned int i;
 
-	blockpage = (int) (addr >> this->page_shift);
+	if (ONENAND_IS_2PLANE(this))
+		blockpage = onenand_get_2x_blockpage(mtd, addr);
+	else
+		blockpage = (int) (addr >> this->page_shift);
 
 	/* Invalidate another BufferRAM */
 	i = ONENAND_NEXT_BUFFERRAM(this);
@@ -734,6 +780,7 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
 	int read = 0, column;
 	int thislen;
 	int ret = 0, boundary = 0;
+	int writesize = this->writesize;
 
 	DEBUG(MTD_DEBUG_LEVEL3, "onenand_read: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
 
@@ -754,22 +801,22 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
  	/* Do first load to bufferRAM */
  	if (read < len) {
  		if (!onenand_check_bufferram(mtd, from)) {
- 			this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize);
+			this->command(mtd, ONENAND_CMD_READ, from, writesize);
  			ret = this->wait(mtd, FL_READING);
  			onenand_update_bufferram(mtd, from, !ret);
  		}
  	}
 
- 	thislen = min_t(int, mtd->writesize, len - read);
- 	column = from & (mtd->writesize - 1);
- 	if (column + thislen > mtd->writesize)
- 		thislen = mtd->writesize - column;
+	thislen = min_t(int, writesize, len - read);
+	column = from & (writesize - 1);
+	if (column + thislen > writesize)
+		thislen = writesize - column;
 
  	while (!ret) {
  		/* If there is more to load then start next load */
  		from += thislen;
  		if (read + thislen < len) {
- 			this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize);
+			this->command(mtd, ONENAND_CMD_READ, from, writesize);
  			/*
  			 * Chip boundary handling in DDP
  			 * Now we issued chip 1 read and pointed chip 1
@@ -794,7 +841,7 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
  			this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
  		ONENAND_SET_NEXT_BUFFERRAM(this);
  		buf += thislen;
- 		thislen = min_t(int, mtd->writesize, len - read);
+		thislen = min_t(int, writesize, len - read);
  		column = 0;
  		cond_resched();
  		/* Now wait for load */
@@ -1079,7 +1126,7 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
 		/* Read more? */
 		if (read < len) {
 			/* Update Page size */
-			from += mtd->writesize;
+			from += this->writesize;
 			column = 0;
 		}
 	}
@@ -1135,12 +1182,12 @@ static int onenand_verify(struct mtd_info *mtd, const u_char *buf, loff_t addr,
 	int thislen, column;
 
 	while (len != 0) {
-		thislen = min_t(int, mtd->writesize, len);
-		column = addr & (mtd->writesize - 1);
-		if (column + thislen > mtd->writesize)
-			thislen = mtd->writesize - column;
+		thislen = min_t(int, this->writesize, len);
+		column = addr & (this->writesize - 1);
+		if (column + thislen > this->writesize)
+			thislen = this->writesize - column;
 
-		this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize);
+		this->command(mtd, ONENAND_CMD_READ, addr, this->writesize);
 
 		onenand_update_bufferram(mtd, addr, 0);
 
@@ -1236,6 +1283,10 @@ static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
 
 		/* In partial page write we don't update bufferram */
 		onenand_update_bufferram(mtd, to, !ret && !subpage);
+		if (ONENAND_IS_2PLANE(this)) {
+			ONENAND_SET_BUFFERRAM1(this);
+			onenand_update_bufferram(mtd, to + this->writesize, !ret && !subpage);
+		}
 
 		if (ret) {
 			printk(KERN_ERR "onenand_write: write filaed %d\n", ret);
@@ -1384,6 +1435,10 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
 		this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
 
 		onenand_update_bufferram(mtd, to, 0);
+		if (ONENAND_IS_2PLANE(this)) {
+			ONENAND_SET_BUFFERRAM1(this);
+			onenand_update_bufferram(mtd, to + this->writesize, 0);
+		}
 
 		ret = this->wait(mtd, FL_WRITING);
 		if (ret) {
@@ -2107,6 +2162,7 @@ static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
  *
  * Check and set OneNAND features
  * - lock scheme
+ * - two plane
  */
 static void onenand_check_features(struct mtd_info *mtd)
 {
@@ -2118,19 +2174,35 @@ static void onenand_check_features(struct mtd_info *mtd)
 	process = this->version_id >> ONENAND_VERSION_PROCESS_SHIFT;
 
 	/* Lock scheme */
-	if (density >= ONENAND_DEVICE_DENSITY_1Gb) {
+	switch (density) {
+	case ONENAND_DEVICE_DENSITY_4Gb:
+		this->options |= ONENAND_HAS_2PLANE;
+
+	case ONENAND_DEVICE_DENSITY_2Gb:
+		/* 2Gb DDP don't have 2 plane */
+		if (!ONENAND_IS_DDP(this))
+			this->options |= ONENAND_HAS_2PLANE;
+		this->options |= ONENAND_HAS_UNLOCK_ALL;
+
+	case ONENAND_DEVICE_DENSITY_1Gb:
 		/* A-Die has all block unlock */
-		if (process) {
-			printk(KERN_DEBUG "Chip support all block unlock\n");
+		if (process)
 			this->options |= ONENAND_HAS_UNLOCK_ALL;
-		}
-	} else {
-		/* Some OneNAND has continues lock scheme */
-		if (!process) {
-			printk(KERN_DEBUG "Lock scheme is Continues Lock\n");
+		break;
+
+	default:
+		/* Some OneNAND has continuous lock scheme */
+		if (!process)
 			this->options |= ONENAND_HAS_CONT_LOCK;
-		}
+		break;
 	}
+
+	if (this->options & ONENAND_HAS_CONT_LOCK)
+		printk(KERN_DEBUG "Lock scheme is Continuous Lock\n");
+	if (this->options & ONENAND_HAS_UNLOCK_ALL)
+		printk(KERN_DEBUG "Chip support all block unlock\n");
+	if (this->options & ONENAND_HAS_2PLANE)
+		printk(KERN_DEBUG "Chip has 2 plane\n");
 }
 
 /**
@@ -2257,6 +2329,8 @@ static int onenand_probe(struct mtd_info *mtd)
 	this->erase_shift = ffs(mtd->erasesize) - 1;
 	this->page_shift = ffs(mtd->writesize) - 1;
 	this->page_mask = (1 << (this->erase_shift - this->page_shift)) - 1;
+	/* It's real page size */
+	this->writesize = mtd->writesize;
 
 	/* REVIST: Multichip handling */
 
@@ -2265,6 +2339,17 @@ static int onenand_probe(struct mtd_info *mtd)
 	/* Check OneNAND features */
 	onenand_check_features(mtd);
 
+	/*
+	 * We emulate the 4KiB page and 256KiB erase block size
+	 * But oobsize is still 64 bytes.
+	 * It is only valid if you turn on 2X program support,
+	 * Otherwise it will be ignored by compiler.
+	 */
+	if (ONENAND_IS_2PLANE(this)) {
+		mtd->writesize <<= 1;
+		mtd->erasesize <<= 1;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/mtd/onenand/onenand_sim.c b/drivers/mtd/onenand/onenand_sim.c
new file mode 100644
index 0000000..b806673
--- /dev/null
+++ b/drivers/mtd/onenand/onenand_sim.c
@@ -0,0 +1,495 @@
+/*
+ *  linux/drivers/mtd/onenand/onenand_sim.c
+ *
+ *  The OneNAND simulator
+ *
+ *  Copyright © 2005-2007 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/onenand.h>
+
+#include <linux/io.h>
+
+#ifndef CONFIG_ONENAND_SIM_MANUFACTURER
+#define CONFIG_ONENAND_SIM_MANUFACTURER         0xec
+#endif
+#ifndef CONFIG_ONENAND_SIM_DEVICE_ID
+#define CONFIG_ONENAND_SIM_DEVICE_ID            0x04
+#endif
+#ifndef CONFIG_ONENAND_SIM_VERSION_ID
+#define CONFIG_ONENAND_SIM_VERSION_ID           0x1e
+#endif
+
+static int manuf_id	= CONFIG_ONENAND_SIM_MANUFACTURER;
+static int device_id	= CONFIG_ONENAND_SIM_DEVICE_ID;
+static int version_id	= CONFIG_ONENAND_SIM_VERSION_ID;
+
+struct onenand_flash {
+	void __iomem *base;
+	void __iomem *data;
+};
+
+#define ONENAND_CORE(flash)		(flash->data)
+#define ONENAND_CORE_SPARE(flash, this, offset)				\
+	((flash->data) + (this->chipsize) + (offset >> 5))
+
+#define ONENAND_MAIN_AREA(this, offset)					\
+	(this->base + ONENAND_DATARAM + offset)
+
+#define ONENAND_SPARE_AREA(this, offset)				\
+	(this->base + ONENAND_SPARERAM + offset)
+
+#define ONENAND_GET_WP_STATUS(this)					\
+	(readw(this->base + ONENAND_REG_WP_STATUS))
+
+#define ONENAND_SET_WP_STATUS(v, this)					\
+	(writew(v, this->base + ONENAND_REG_WP_STATUS))
+
+/* It has all 0xff chars */
+#define MAX_ONENAND_PAGESIZE		(2048 + 64)
+static unsigned char *ffchars;
+
+static struct mtd_partition os_partitions[] = {
+	{
+		.name		= "OneNAND simulator partition",
+		.offset		= 0,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+/*
+ * OneNAND simulator mtd
+ */
+struct onenand_info {
+	struct mtd_info		mtd;
+	struct mtd_partition	*parts;
+	struct onenand_chip	onenand;
+	struct onenand_flash	flash;
+};
+
+struct onenand_info *info;
+
+#define DPRINTK(format, args...)					\
+do {									\
+	printk(KERN_DEBUG "%s[%d]: " format "\n", __func__,		\
+			   __LINE__, ##args);				\
+} while (0)
+
+/**
+ * onenand_lock_handle - Handle Lock scheme
+ * @param this		OneNAND device structure
+ * @param cmd		The command to be sent
+ *
+ * Send lock command to OneNAND device.
+ * The lock scheme is depends on chip type.
+ */
+static void onenand_lock_handle(struct onenand_chip *this, int cmd)
+{
+	int block_lock_scheme;
+	int status;
+
+	status = ONENAND_GET_WP_STATUS(this);
+	block_lock_scheme = !(this->options & ONENAND_HAS_CONT_LOCK);
+
+	switch (cmd) {
+	case ONENAND_CMD_UNLOCK:
+		if (block_lock_scheme)
+			ONENAND_SET_WP_STATUS(ONENAND_WP_US, this);
+		else
+			ONENAND_SET_WP_STATUS(status | ONENAND_WP_US, this);
+		break;
+
+	case ONENAND_CMD_LOCK:
+		if (block_lock_scheme)
+			ONENAND_SET_WP_STATUS(ONENAND_WP_LS, this);
+		else
+			ONENAND_SET_WP_STATUS(status | ONENAND_WP_LS, this);
+		break;
+
+	case ONENAND_CMD_LOCK_TIGHT:
+		if (block_lock_scheme)
+			ONENAND_SET_WP_STATUS(ONENAND_WP_LTS, this);
+		else
+			ONENAND_SET_WP_STATUS(status | ONENAND_WP_LTS, this);
+		break;
+
+	default:
+		break;
+	}
+}
+
+/**
+ * onenand_bootram_handle - Handle BootRAM area
+ * @param this		OneNAND device structure
+ * @param cmd		The command to be sent
+ *
+ * Emulate BootRAM area. It is possible to do basic operation using BootRAM.
+ */
+static void onenand_bootram_handle(struct onenand_chip *this, int cmd)
+{
+	switch (cmd) {
+	case ONENAND_CMD_READID:
+		writew(manuf_id, this->base);
+		writew(device_id, this->base + 2);
+		writew(version_id, this->base + 4);
+		break;
+
+	default:
+		/* REVIST: Handle other commands */
+		break;
+	}
+}
+
+/**
+ * onenand_update_interrupt - Set interrupt register
+ * @param this         OneNAND device structure
+ * @param cmd          The command to be sent
+ *
+ * Update interrupt register. The status is depends on command.
+ */
+static void onenand_update_interrupt(struct onenand_chip *this, int cmd)
+{
+	int interrupt = ONENAND_INT_MASTER;
+
+	switch (cmd) {
+	case ONENAND_CMD_READ:
+	case ONENAND_CMD_READOOB:
+		interrupt |= ONENAND_INT_READ;
+		break;
+
+	case ONENAND_CMD_PROG:
+	case ONENAND_CMD_PROGOOB:
+		interrupt |= ONENAND_INT_WRITE;
+		break;
+
+	case ONENAND_CMD_ERASE:
+		interrupt |= ONENAND_INT_ERASE;
+		break;
+
+	case ONENAND_CMD_RESET:
+		interrupt |= ONENAND_INT_RESET;
+		break;
+
+	default:
+		break;
+	}
+
+	writew(interrupt, this->base + ONENAND_REG_INTERRUPT);
+}
+
+/**
+ * onenand_check_overwrite - Check over-write if happend
+ * @param dest		The destination pointer
+ * @param src		The source pointer
+ * @param count		The length to be check
+ * @return		0 on same, otherwise 1
+ *
+ * Compare the source with destination
+ */
+static int onenand_check_overwrite(void *dest, void *src, size_t count)
+{
+	unsigned int *s = (unsigned int *) src;
+	unsigned int *d = (unsigned int *) dest;
+	int i;
+
+	count >>= 2;
+	for (i = 0; i < count; i++)
+		if ((*s++ ^ *d++) != 0)
+			return 1;
+
+	return 0;
+}
+
+/**
+ * onenand_data_handle - Handle OneNAND Core and DataRAM
+ * @param this		OneNAND device structure
+ * @param cmd		The command to be sent
+ * @param dataram	Which dataram used
+ * @param offset	The offset to OneNAND Core
+ *
+ * Copy data from OneNAND Core to DataRAM (read)
+ * Copy data from DataRAM to OneNAND Core (write)
+ * Erase the OneNAND Core (erase)
+ */
+static void onenand_data_handle(struct onenand_chip *this, int cmd,
+				int dataram, unsigned int offset)
+{
+	struct mtd_info *mtd = &info->mtd;
+	struct onenand_flash *flash = this->priv;
+	int main_offset, spare_offset;
+	void __iomem *src;
+	void __iomem *dest;
+	unsigned int i;
+
+	if (dataram) {
+		main_offset = mtd->writesize;
+		spare_offset = mtd->oobsize;
+	} else {
+		main_offset = 0;
+		spare_offset = 0;
+	}
+
+	switch (cmd) {
+	case ONENAND_CMD_READ:
+		src = ONENAND_CORE(flash) + offset;
+		dest = ONENAND_MAIN_AREA(this, main_offset);
+		memcpy(dest, src, mtd->writesize);
+		/* Fall through */
+
+	case ONENAND_CMD_READOOB:
+		src = ONENAND_CORE_SPARE(flash, this, offset);
+		dest = ONENAND_SPARE_AREA(this, spare_offset);
+		memcpy(dest, src, mtd->oobsize);
+		break;
+
+	case ONENAND_CMD_PROG:
+		src = ONENAND_MAIN_AREA(this, main_offset);
+		dest = ONENAND_CORE(flash) + offset;
+		/* To handle partial write */
+		for (i = 0; i < (1 << mtd->subpage_sft); i++) {
+			int off = i * this->subpagesize;
+			if (!memcmp(src + off, ffchars, this->subpagesize))
+				continue;
+			if (memcmp(dest + off, ffchars, this->subpagesize) &&
+			    onenand_check_overwrite(dest + off, src + off, this->subpagesize))
+				printk(KERN_ERR "over-write happend at 0x%08x\n", offset);
+			memcpy(dest + off, src + off, this->subpagesize);
+		}
+		/* Fall through */
+
+	case ONENAND_CMD_PROGOOB:
+		src = ONENAND_SPARE_AREA(this, spare_offset);
+		/* Check all data is 0xff chars */
+		if (!memcmp(src, ffchars, mtd->oobsize))
+			break;
+
+		dest = ONENAND_CORE_SPARE(flash, this, offset);
+		if (memcmp(dest, ffchars, mtd->oobsize) &&
+		    onenand_check_overwrite(dest, src, mtd->oobsize))
+			printk(KERN_ERR "OOB: over-write happend at 0x%08x\n",
+			       offset);
+		memcpy(dest, src, mtd->oobsize);
+		break;
+
+	case ONENAND_CMD_ERASE:
+		memset(ONENAND_CORE(flash) + offset, 0xff, mtd->erasesize);
+		memset(ONENAND_CORE_SPARE(flash, this, offset), 0xff,
+		       (mtd->erasesize >> 5));
+		break;
+
+	default:
+		break;
+	}
+}
+
+/**
+ * onenand_command_handle - Handle command
+ * @param this		OneNAND device structure
+ * @param cmd		The command to be sent
+ *
+ * Emulate OneNAND command.
+ */
+static void onenand_command_handle(struct onenand_chip *this, int cmd)
+{
+	unsigned long offset = 0;
+	int block = -1, page = -1, bufferram = -1;
+	int dataram = 0;
+
+	switch (cmd) {
+	case ONENAND_CMD_UNLOCK:
+	case ONENAND_CMD_LOCK:
+	case ONENAND_CMD_LOCK_TIGHT:
+	case ONENAND_CMD_UNLOCK_ALL:
+		onenand_lock_handle(this, cmd);
+		break;
+
+	case ONENAND_CMD_BUFFERRAM:
+		/* Do nothing */
+		return;
+
+	default:
+		block = (int) readw(this->base + ONENAND_REG_START_ADDRESS1);
+		if (block & (1 << ONENAND_DDP_SHIFT)) {
+			block &= ~(1 << ONENAND_DDP_SHIFT);
+			/* The half of chip block */
+			block += this->chipsize >> (this->erase_shift + 1);
+		}
+		if (cmd == ONENAND_CMD_ERASE)
+			break;
+
+		page = (int) readw(this->base + ONENAND_REG_START_ADDRESS8);
+		page = (page >> ONENAND_FPA_SHIFT);
+		bufferram = (int) readw(this->base + ONENAND_REG_START_BUFFER);
+		bufferram >>= ONENAND_BSA_SHIFT;
+		bufferram &= ONENAND_BSA_DATARAM1;
+		dataram = (bufferram == ONENAND_BSA_DATARAM1) ? 1 : 0;
+		break;
+	}
+
+	if (block != -1)
+		offset += block << this->erase_shift;
+
+	if (page != -1)
+		offset += page << this->page_shift;
+
+	onenand_data_handle(this, cmd, dataram, offset);
+
+	onenand_update_interrupt(this, cmd);
+}
+
+/**
+ * onenand_writew - [OneNAND Interface] Emulate write operation
+ * @param value		value to write
+ * @param addr		address to write
+ *
+ * Write OneNAND register with value
+ */
+static void onenand_writew(unsigned short value, void __iomem * addr)
+{
+	struct onenand_chip *this = info->mtd.priv;
+
+	/* BootRAM handling */
+	if (addr < this->base + ONENAND_DATARAM) {
+		onenand_bootram_handle(this, value);
+		return;
+	}
+	/* Command handling */
+	if (addr == this->base + ONENAND_REG_COMMAND)
+		onenand_command_handle(this, value);
+
+	writew(value, addr);
+}
+
+/**
+ * flash_init - Initialize OneNAND simulator
+ * @param flash		OneNAND simulaotr data strucutres
+ *
+ * Initialize OneNAND simulator.
+ */
+static int __init flash_init(struct onenand_flash *flash)
+{
+	int density, size;
+	int buffer_size;
+
+	flash->base = kzalloc(131072, GFP_KERNEL);
+	if (!flash->base) {
+		printk(KERN_ERR "Unable to allocate base address.\n");
+		return -ENOMEM;
+	}
+
+	density = device_id >> ONENAND_DEVICE_DENSITY_SHIFT;
+	size = ((16 << 20) << density);
+
+	ONENAND_CORE(flash) = vmalloc(size + (size >> 5));
+	if (!ONENAND_CORE(flash)) {
+		printk(KERN_ERR "Unable to allocate nand core address.\n");
+		kfree(flash->base);
+		return -ENOMEM;
+	}
+
+	memset(ONENAND_CORE(flash), 0xff, size + (size >> 5));
+
+	/* Setup registers */
+	writew(manuf_id, flash->base + ONENAND_REG_MANUFACTURER_ID);
+	writew(device_id, flash->base + ONENAND_REG_DEVICE_ID);
+	writew(version_id, flash->base + ONENAND_REG_VERSION_ID);
+
+	if (density < 2)
+		buffer_size = 0x0400;	/* 1KiB page */
+	else
+		buffer_size = 0x0800;	/* 2KiB page */
+	writew(buffer_size, flash->base + ONENAND_REG_DATA_BUFFER_SIZE);
+
+	return 0;
+}
+
+/**
+ * flash_exit - Clean up OneNAND simulator
+ * @param flash		OneNAND simulaotr data strucutres
+ *
+ * Clean up OneNAND simulator.
+ */
+static void flash_exit(struct onenand_flash *flash)
+{
+	vfree(ONENAND_CORE(flash));
+	kfree(flash->base);
+	kfree(flash);
+}
+
+static int __init onenand_sim_init(void)
+{
+	/* Allocate all 0xff chars pointer */
+	ffchars = kmalloc(MAX_ONENAND_PAGESIZE, GFP_KERNEL);
+	if (!ffchars) {
+		printk(KERN_ERR "Unable to allocate ff chars.\n");
+		return -ENOMEM;
+	}
+	memset(ffchars, 0xff, MAX_ONENAND_PAGESIZE);
+
+	/* Allocate OneNAND simulator mtd pointer */
+	info = kzalloc(sizeof(struct onenand_info), GFP_KERNEL);
+	if (!info) {
+		printk(KERN_ERR "Unable to allocate core structures.\n");
+		kfree(ffchars);
+		return -ENOMEM;
+	}
+
+	/* Override write_word function */
+	info->onenand.write_word = onenand_writew;
+
+	if (flash_init(&info->flash)) {
+		printk(KERN_ERR "Unable to allocat flash.\n");
+		kfree(ffchars);
+		kfree(info);
+		return -ENOMEM;
+	}
+
+	info->parts = os_partitions;
+
+	info->onenand.base = info->flash.base;
+	info->onenand.priv = &info->flash;
+
+	info->mtd.name = "OneNAND simulator";
+	info->mtd.priv = &info->onenand;
+	info->mtd.owner = THIS_MODULE;
+
+	if (onenand_scan(&info->mtd, 1)) {
+		flash_exit(&info->flash);
+		kfree(ffchars);
+		kfree(info);
+		return -ENXIO;
+	}
+
+	add_mtd_partitions(&info->mtd, info->parts, ARRAY_SIZE(os_partitions));
+
+	return 0;
+}
+
+static void __exit onenand_sim_exit(void)
+{
+	struct onenand_chip *this = info->mtd.priv;
+	struct onenand_flash *flash = this->priv;
+
+	onenand_release(&info->mtd);
+	flash_exit(flash);
+	kfree(ffchars);
+	kfree(info);
+}
+
+module_init(onenand_sim_init);
+module_exit(onenand_sim_exit);
+
+MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
+MODULE_DESCRIPTION("The OneNAND flash simulator");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 1938d6d..cc01dbd 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -3556,10 +3556,12 @@ static int nv_request_irq(struct net_device *dev, int intr_test)
 	}
 	if (ret != 0 && np->msi_flags & NV_MSI_CAPABLE) {
 		if ((ret = pci_enable_msi(np->pci_dev)) == 0) {
+			pci_intx(np->pci_dev, 0);
 			np->msi_flags |= NV_MSI_ENABLED;
 			if (request_irq(np->pci_dev->irq, handler, IRQF_SHARED, dev->name, dev) != 0) {
 				printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
 				pci_disable_msi(np->pci_dev);
+				pci_intx(np->pci_dev, 1);
 				np->msi_flags &= ~NV_MSI_ENABLED;
 				goto out_err;
 			}
@@ -3601,6 +3603,7 @@ static void nv_free_irq(struct net_device *dev)
 		free_irq(np->pci_dev->irq, dev);
 		if (np->msi_flags & NV_MSI_ENABLED) {
 			pci_disable_msi(np->pci_dev);
+			pci_intx(np->pci_dev, 1);
 			np->msi_flags &= ~NV_MSI_ENABLED;
 		}
 	}
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 7dcaa09..eb69d4d 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1390,6 +1390,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x260a, quirk_intel_pcie_pm);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x260b, quirk_intel_pcie_pm);
 
 /*
+ * According to Tom Sylla, the Geode does not support PCI power management
+ * transition, so we shouldn't need the D3hot delay.
+ */
+static void __init quirk_geode_pci_pm(struct pci_dev *dev)
+{
+	pci_pm_d3_delay = 0;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, quirk_geode_pci_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_geode_pci_pm);
+
+/*
  * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size
  * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes.
  * Re-allocate the region if needed...
diff --git a/drivers/sysprof/Kconfig b/drivers/sysprof/Kconfig
new file mode 100644
index 0000000..b99c13a
--- /dev/null
+++ b/drivers/sysprof/Kconfig
@@ -0,0 +1,12 @@
+
+menu "Sysprof"
+
+config SYSPROF
+	tristate "Sysprof support"
+	help
+	 Say M here to include the sysprof-module.
+
+	 Sysprof is a sampling profiler that uses a kernel module,
+	 sysprof-module, to generate stacktraces which are then interpreted by
+	 the userspace program "sysprof".
+endmenu
diff --git a/drivers/sysprof/Makefile b/drivers/sysprof/Makefile
new file mode 100644
index 0000000..cd465e9
--- /dev/null
+++ b/drivers/sysprof/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_SYSPROF)	+= sysprof-module.o
diff --git a/drivers/sysprof/config.h b/drivers/sysprof/config.h
new file mode 100644
index 0000000..bb62689
--- /dev/null
+++ b/drivers/sysprof/config.h
@@ -0,0 +1,23 @@
+/* config.h.  Generated by configure.  */
+/* config.h.in.  Generated from configure.ac by autoheader.  */
+
+/* Look for global separate debug info in this path */
+#define DEBUGDIR "/usr/local/lib/debug"
+
+/* Define to 1 if you have the `iberty' library (-liberty). */
+/* #undef HAVE_LIBIBERTY */
+
+/* Define to the address where bug reports for this package should be sent. */
+#define PACKAGE_BUGREPORT ""
+
+/* Define to the full name of this package. */
+#define PACKAGE_NAME "sysprof"
+
+/* Define to the full name and version of this package. */
+#define PACKAGE_STRING "sysprof 1.0.8"
+
+/* Define to the one symbol short name of this package. */
+#define PACKAGE_TARNAME "sysprof"
+
+/* Define to the version of this package. */
+#define PACKAGE_VERSION "1.0.8"
diff --git a/drivers/sysprof/sysprof-module.c b/drivers/sysprof/sysprof-module.c
new file mode 100644
index 0000000..36e0b51
--- /dev/null
+++ b/drivers/sysprof/sysprof-module.c
@@ -0,0 +1,271 @@
+/* -*- c-basic-offset: 8 -*- */
+
+/* Sysprof -- Sampling, systemwide CPU profiler
+ * Copyright 2004, Red Hat, Inc.
+ * Copyright 2004, 2005, Soeren Sandmann
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifdef CONFIG_SMP
+# define __SMP__
+#endif
+#include <asm/atomic.h>
+#include <linux/kernel.h>  /* Needed for KERN_ALERT */
+#include <linux/module.h>  /* Needed by all modules */
+#include <linux/sched.h>
+
+#include <linux/proc_fs.h>
+#include <asm/uaccess.h>
+#include <linux/poll.h>
+#include <linux/highmem.h>
+#include <linux/pagemap.h>
+#include <linux/profile.h>
+
+#include "sysprof-module.h"
+
+#include "config.h"
+
+#include <linux/version.h>
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
+#include <linux/config.h>
+#endif
+
+#if !CONFIG_PROFILING
+# error Sysprof needs a kernel with profiling support compiled in.
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11)
+# error Sysprof needs a Linux 2.6.11 kernel or later
+#endif
+#include <linux/kallsyms.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Soeren Sandmann (sandmann@daimi.au.dk)");
+
+#define SAMPLES_PER_SECOND (200)
+#define INTERVAL ((HZ <= SAMPLES_PER_SECOND)? 1 : (HZ / SAMPLES_PER_SECOND))
+#define N_TRACES 256
+
+static SysprofStackTrace	stack_traces[N_TRACES];
+static SysprofStackTrace *	head = &stack_traces[0];
+static SysprofStackTrace *	tail = &stack_traces[0];
+DECLARE_WAIT_QUEUE_HEAD (wait_for_trace);
+DECLARE_WAIT_QUEUE_HEAD (wait_for_exit);
+
+/* Macro the names of the registers that are used on each architecture */
+#if defined(CONFIG_X86_64)
+# define REG_FRAME_PTR rbp
+# define REG_INS_PTR rip
+# define REG_STACK_PTR rsp
+#elif defined(CONFIG_X86)
+# define REG_FRAME_PTR ebp
+# define REG_INS_PTR eip
+# define REG_STACK_PTR esp
+#else
+# error Sysprof only supports the i386 and x86-64 architectures
+#endif
+
+typedef struct userspace_reader userspace_reader;
+struct userspace_reader
+{
+	struct task_struct *task;
+	unsigned long cache_address;
+	unsigned long *cache;
+};
+
+typedef struct StackFrame StackFrame;
+struct StackFrame {
+	unsigned long next;
+	unsigned long return_address;
+};
+
+struct work_struct work;
+
+static int
+read_frame (void *frame_pointer, StackFrame *frame)
+{
+#if 0
+	/* This is commented out because we seem to be called with
+	 * (current_thread_info()->addr_limit.seg)) == 0
+	 * which means access_ok() _always_ fails.
+	 *
+	 * Not sure why (or if) this isn't the case for oprofile
+	 */
+	if (!access_ok(VERIFY_READ, frame_pointer, sizeof(StackFrame)))
+		return 1;
+#endif
+
+	if (__copy_from_user_inatomic (
+		    frame, frame_pointer, sizeof (StackFrame)))
+		return 1;
+	
+	return 0;
+}
+
+DEFINE_PER_CPU(int, n_samples);
+
+static int
+timer_notify (struct pt_regs *regs)
+{
+	SysprofStackTrace *trace = head;
+	int i;
+	int is_user;
+	static atomic_t in_timer_notify = ATOMIC_INIT(1);
+	int n;
+
+	n = ++get_cpu_var(n_samples);
+	put_cpu_var(n_samples);
+
+	if (n % INTERVAL != 0)
+		return 0;
+
+	/* 0: locked, 1: unlocked */
+	
+	if (!atomic_dec_and_test(&in_timer_notify))
+		goto out;
+	
+	is_user = user_mode(regs);
+
+	if (!current || current->pid == 0)
+		goto out;
+	
+	if (is_user && current->state != TASK_RUNNING)
+		goto out;
+
+	if (!is_user)
+	{
+		/* kernel */
+		
+		trace->pid = current->pid;
+		trace->truncated = 0;
+		trace->n_addresses = 1;
+
+		/* 0x1 is taken by sysprof to mean "in kernel" */
+		trace->addresses[0] = (void *)0x1;
+	}
+	else
+	{
+		StackFrame *frame_pointer;
+		StackFrame frame;
+		memset(trace, 0, sizeof (SysprofStackTrace));
+		
+		trace->pid = current->pid;
+		trace->truncated = 0;
+
+		i = 0;
+		
+		trace->addresses[i++] = (void *)regs->REG_INS_PTR;
+		
+		frame_pointer = (void *)regs->REG_FRAME_PTR;
+	
+		while (read_frame (frame_pointer, &frame) == 0		&&
+		       i < SYSPROF_MAX_ADDRESSES			&&
+		       (unsigned long)frame_pointer >= regs->REG_STACK_PTR)
+		{
+			trace->addresses[i++] = (void *)frame.return_address;
+			frame_pointer = (StackFrame *)frame.next;
+		}
+		
+		trace->n_addresses = i;
+
+		if (i == SYSPROF_MAX_ADDRESSES)
+			trace->truncated = 1;
+		else
+			trace->truncated = 0;
+	}
+	
+	if (head++ == &stack_traces[N_TRACES - 1])
+		head = &stack_traces[0];
+	
+	wake_up (&wait_for_trace);
+
+out:
+	atomic_inc(&in_timer_notify);
+	return 0;
+}
+
+static int
+procfile_read(char *buffer, 
+	      char **buffer_location, 
+	      off_t offset, 
+	      int buffer_len,
+	      int *eof,
+	      void *data)
+{
+	if (head == tail)
+		return -EWOULDBLOCK;
+	
+	*buffer_location = (char *)tail;
+
+	BUG_ON(tail->pid == 0);
+	
+	if (tail++ == &stack_traces[N_TRACES - 1])
+		tail = &stack_traces[0];
+	
+	return sizeof (SysprofStackTrace);
+}
+
+struct proc_dir_entry *trace_proc_file;
+static unsigned int
+procfile_poll(struct file *filp, poll_table *poll_table)
+{
+	if (head != tail)
+		return POLLIN | POLLRDNORM;
+	
+	poll_wait(filp, &wait_for_trace, poll_table);
+
+	if (head != tail)
+		return POLLIN | POLLRDNORM;
+	
+	return 0;
+}
+
+int
+init_module(void)
+{
+	static struct file_operations fops;
+
+	trace_proc_file =
+		create_proc_entry ("sysprof-trace", S_IFREG | S_IRUGO, &proc_root);
+	
+	if (!trace_proc_file)
+		return 1;
+
+	fops = *trace_proc_file->proc_fops;
+	fops.poll = procfile_poll;
+	
+	trace_proc_file->read_proc = procfile_read;
+	trace_proc_file->proc_fops = &fops;
+	trace_proc_file->size = sizeof (SysprofStackTrace);
+
+	register_timer_hook (timer_notify);
+	
+	printk(KERN_ALERT "sysprof: loaded (%s)\n", PACKAGE_VERSION);
+	
+	return 0;
+}
+
+void
+cleanup_module(void)
+{
+	unregister_timer_hook (timer_notify);
+	
+	remove_proc_entry("sysprof-trace", &proc_root);
+
+	printk(KERN_ALERT "sysprof: unloaded\n");
+}
+
diff --git a/drivers/sysprof/sysprof-module.h b/drivers/sysprof/sysprof-module.h
new file mode 100644
index 0000000..66a11ae
--- /dev/null
+++ b/drivers/sysprof/sysprof-module.h
@@ -0,0 +1,37 @@
+/* Sysprof -- Sampling, systemwide CPU profiler
+ * Copyright 2004, Red Hat, Inc.
+ * Copyright 2004, 2005, Soeren Sandmann
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef SYSPROF_MODULE_H
+#define SYSPROF_MODULE_H
+
+typedef struct SysprofStackTrace SysprofStackTrace;
+
+#define SYSPROF_MAX_ADDRESSES 512
+
+struct SysprofStackTrace
+{
+    int	pid;		/* -1 if in kernel */
+    int truncated;
+    int n_addresses;	/* note: this can be 1 if the process was compiled
+			 * with -fomit-frame-pointer or is otherwise weird
+			 */
+    void *addresses[SYSPROF_MAX_ADDRESSES];
+};
+
+#endif
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 5216c11..3e3df7e 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -594,7 +594,7 @@ config FB_TGA
 
 config FB_VESA
 	bool "VESA VGA graphics support"
-	depends on (FB = y) && X86
+	depends on (FB = y) && X86 && !VGA_NOPROBE
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -1028,7 +1028,7 @@ config FB_CARILLO_RANCH
 
 config FB_INTEL
 	tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)"
-	depends on FB && EXPERIMENTAL && PCI && X86
+	depends on FB && EXPERIMENTAL && PCI && X86 && !VGA_NOPROBE
 	select AGP
 	select AGP_INTEL
 	select FB_MODE_HELPERS
@@ -1383,7 +1383,7 @@ config FB_SAVAGE_ACCEL
 
 config FB_SIS
 	tristate "SiS/XGI display support"
-	depends on FB && PCI
+	depends on FB && PCI && !VGA_NOPROBE
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -1822,6 +1822,15 @@ config FB_PS3_DEFAULT_SIZE_M
 	  The default value can be overridden on the kernel command line
 	  using the "ps3fb" option (e.g. "ps3fb=9M");
 
+config FB_OLPC_DCON
+	tristate "One Laptop Per Child Display CONtroller support"
+	depends on OLPC
+	select I2C
+	---help---
+	  Add support for the OLPC DCON controller.  This controller is only
+	  available on OLPC platforms.   Unless you have one of these
+	  platforms, you will want to say 'N'.
+
 config FB_XILINX
 	tristate "Xilinx frame buffer support"
 	depends on FB && XILINX_VIRTEX
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 06eec7b..fc535fb 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -111,6 +111,7 @@ obj-$(CONFIG_FB_PNX4008_DUM_RGB)  += pnx4008/
 obj-$(CONFIG_FB_IBM_GXT4500)	  += gxt4500.o
 obj-$(CONFIG_FB_PS3)		  += ps3fb.o
 obj-$(CONFIG_FB_SM501)            += sm501fb.o
+obj-$(CONFIG_FB_OLPC_DCON)	  += olpc_dcon.o
 obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
 obj-$(CONFIG_FB_OMAP)             += omap/
 
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 0740272..4ac6a95 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -820,6 +820,53 @@ static void try_to_load(int fb)
 #endif /* CONFIG_KMOD */
 
 int
+fb_powerup(struct fb_info *info)
+{
+	int ret = 0;
+
+	if (!info || info->state == FBINFO_STATE_RUNNING)
+		return 0;
+
+	if (info->fbops->fb_powerup)
+		ret = info->fbops->fb_powerup(info);
+
+	if (!ret) {
+		acquire_console_sem();
+		fb_set_suspend(info, 0);
+		release_console_sem();
+	}
+
+	return ret;
+}
+
+int
+fb_powerdown(struct fb_info *info)
+{
+	int ret = 0;
+
+	if (!info || info->state == FBINFO_STATE_SUSPENDED)
+		return 0;
+
+	/* Tell everybody that the fbdev is going down */
+	acquire_console_sem();
+	fb_set_suspend(info, 1);
+	release_console_sem();
+
+	if (info->fbops->fb_powerdown)
+		ret = info->fbops->fb_powerdown(info);
+
+	/* If the power down failed, then un-notify */
+
+	if (ret) {
+		acquire_console_sem();
+		fb_set_suspend(info, 0);
+		release_console_sem();
+	}
+
+	return ret;
+}
+
+int
 fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var)
 {
 	struct fb_fix_screeninfo *fix = &info->fix;
diff --git a/drivers/video/geode/Makefile b/drivers/video/geode/Makefile
index 957304b..5c98da1 100644
--- a/drivers/video/geode/Makefile
+++ b/drivers/video/geode/Makefile
@@ -5,5 +5,5 @@ obj-$(CONFIG_FB_GEODE_GX)  += gxfb.o
 obj-$(CONFIG_FB_GEODE_LX)  += lxfb.o
 
 gx1fb-objs := gx1fb_core.o display_gx1.o video_cs5530.o
-gxfb-objs  := gxfb_core.o display_gx.o video_gx.o
+gxfb-objs  := gxfb_core.o display_gx.o video_gx.o suspend_gx.o
 lxfb-objs  := lxfb_core.o lxfb_ops.o
diff --git a/drivers/video/geode/display_gx.c b/drivers/video/geode/display_gx.c
index 0f16e4b..a432b99 100644
--- a/drivers/video/geode/display_gx.c
+++ b/drivers/video/geode/display_gx.c
@@ -11,26 +11,44 @@
  *   Free Software Foundation; either version 2 of the License, or * (at your
  *   option) any later version.
  */
+
+#include <linux/kernel.h>
 #include <linux/spinlock.h>
 #include <linux/fb.h>
 #include <linux/delay.h>
 #include <asm/io.h>
 #include <asm/div64.h>
 #include <asm/delay.h>
+#include <asm/olpc.h>
 
 #include "geodefb.h"
 #include "display_gx.h"
 
-#ifdef CONFIG_FB_GEODE_GX_SET_FBSIZE
-unsigned int gx_frame_buffer_size(void)
+static inline void rmwl(u32 val, u32 *reg)
 {
-	return CONFIG_FB_GEODE_GX_FBSIZE;
+	u32 in = readl(reg);
+	if (in != val)
+		writel(val, reg);
 }
-#else
+
 unsigned int gx_frame_buffer_size(void)
 {
 	unsigned int val;
 
+#ifdef CONFIG_OLPC
+	if (machine_is_olpc() && !olpc_has_vsa()) {
+		u32 hi,lo;	
+		rdmsr(GLIU0_P2D_RO0, lo, hi);
+
+		/* Top page number */
+		val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20);  
+
+		val -= (lo & 0x000fffff); /* Subtract bottom page number */
+		val += 1;		  /* Adjust page count */
+		return (val << 12);
+	}
+#endif
+
 	/* FB size is reported by a virtual register */
 	/* Virtual register class = 0x02 */
 	/* VG_MEM_SIZE(512Kb units) = 0x00 */
@@ -41,7 +59,6 @@ unsigned int gx_frame_buffer_size(void)
 	val = (unsigned int)(inw(0xAC1E)) & 0xFFl;
 	return (val << 19);
 }
-#endif
 
 int gx_line_delta(int xres, int bpp)
 {
@@ -63,23 +80,23 @@ static void gx_set_mode(struct fb_info *info)
 	gcfg = readl(par->dc_regs + DC_GENERAL_CFG);
 	dcfg = readl(par->dc_regs + DC_DISPLAY_CFG);
 
-	/* Disable the timing generator. */
-	dcfg &= ~(DC_DCFG_TGEN);
-	writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
+	/* Programming the clock is costly and ugly, so avoid if if we can */
 
-	/* Wait for pending memory requests before disabling the FIFO load. */
-	udelay(100);
+	if (par->curdclk != info->var.pixclock) {
+		/* Disable the timing generator. */
+		dcfg &= ~(DC_DCFG_TGEN);
+		writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
 
-	/* Disable FIFO load and compression. */
-	gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
-	writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
+		/* Wait for pending memory requests before disabling the FIFO load. */
+		udelay(100);
 
-	/* Setup DCLK and its divisor. */
-	par->vid_ops->set_dclk(info);
+		/* Disable FIFO load and compression. */
+		gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
+		writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
 
-	/*
-	 * Setup new mode.
-	 */
+		/* Setup DCLK and its divisor. */
+		par->vid_ops->set_dclk(info);
+	}
 
 	/* Clear all unused feature bits. */
 	gcfg &= DC_GCFG_YUVM | DC_GCFG_VDSE;
@@ -90,12 +107,13 @@ static void gx_set_mode(struct fb_info *info)
 	gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE;
 
 	/* Framebuffer start offset. */
-	writel(0, par->dc_regs + DC_FB_ST_OFFSET);
+	rmwl(0, par->dc_regs + DC_FB_ST_OFFSET);
 
 	/* Line delta and line buffer length. */
-	writel(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH);
-	writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
-	       par->dc_regs + DC_LINE_SIZE);
+	rmwl(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH);
+
+	rmwl(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
+	     par->dc_regs + DC_LINE_SIZE);
 
 
 	/* Enable graphics and video data and unmask address lines. */
@@ -134,17 +152,16 @@ static void gx_set_mode(struct fb_info *info)
 	vblankend = vsyncend + info->var.upper_margin;
 	vtotal = vblankend;
 
-	writel((hactive - 1)     | ((htotal - 1) << 16),    par->dc_regs + DC_H_ACTIVE_TIMING);
-	writel((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING);
-	writel((hsyncstart - 1)  | ((hsyncend - 1) << 16),  par->dc_regs + DC_H_SYNC_TIMING);
-
-	writel((vactive - 1)     | ((vtotal - 1) << 16),    par->dc_regs + DC_V_ACTIVE_TIMING);
-	writel((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING);
-	writel((vsyncstart - 1)  | ((vsyncend - 1) << 16),  par->dc_regs + DC_V_SYNC_TIMING);
+	rmwl((hactive - 1)     | ((htotal - 1) << 16),    par->dc_regs + DC_H_ACTIVE_TIMING);
+	rmwl((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING);
+	rmwl((hsyncstart - 1)  | ((hsyncend - 1) << 16),  par->dc_regs + DC_H_SYNC_TIMING);
+	rmwl((vactive - 1)     | ((vtotal - 1) << 16),    par->dc_regs + DC_V_ACTIVE_TIMING);
+	rmwl((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING);
+	rmwl((vsyncstart - 1)  | ((vsyncend - 1) << 16),  par->dc_regs + DC_V_SYNC_TIMING);
 
 	/* Write final register values. */
-	writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
-	writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
+	rmwl(dcfg, par->dc_regs + DC_DISPLAY_CFG);
+	rmwl(gcfg, par->dc_regs + DC_GENERAL_CFG);
 
 	par->vid_ops->configure_display(info);
 
diff --git a/drivers/video/geode/display_gx.h b/drivers/video/geode/display_gx.h
index 0af33f3..d20b877 100644
--- a/drivers/video/geode/display_gx.h
+++ b/drivers/video/geode/display_gx.h
@@ -20,6 +20,9 @@ extern struct geode_dc_ops gx_dc_ops;
 #define GLD_MSR_CONFIG   0xC0002001
 #define GLD_MSR_CONFIG_DM_FP 0x40
 
+/* Used for memory dection on the OLPC */
+#define GLIU0_P2D_RO0 0x10000029
+
 /* Display controller registers */
 
 #define DC_UNLOCK 0x00
diff --git a/drivers/video/geode/geode_regs.h b/drivers/video/geode/geode_regs.h
new file mode 100644
index 0000000..9e75505
--- /dev/null
+++ b/drivers/video/geode/geode_regs.h
@@ -0,0 +1,242 @@
+/* This header file defines the registers and suspend/resume
+   structures for the Geode GX and LX.   The lxfb driver defines
+   _GEODELX_ before including this file, which will unlock the
+   extra registers that are only valid for LX.
+*/
+
+#ifndef _GEODE_REGS_H_
+#define _GEODE_REGS_H_
+
+/* MSRs */
+
+#define GX_VP_MSR_PAD_SELECT    0xC0002011
+#define LX_VP_MSR_PAD_SELECT    0x48000011
+
+#define GEODE_MSR_GLCP_DOTPLL   0x4c000015
+
+#define GLCP_DOTPLL_RESET    (1 << 0)
+#define GLCP_DOTPLL_BYPASS   (1 << 15)
+#define GLCP_DOTPLL_HALFPIX  (1 << 24)
+#define GLCP_DOTPLL_LOCK     (1 << 25)
+
+/* Registers */
+#define VP_FP_START          0x400
+
+
+#ifdef _GEODELX_
+
+#define GP_REG_SIZE  0x7C
+#define DC_REG_SIZE  0xF0
+#define VP_REG_SIZE  0x158
+#define FP_REG_SIZE  0x70
+
+#else
+
+#define GP_REG_SIZE 0x50
+#define DC_REG_SIZE 0x90
+#define VP_REG_SIZE 0x138
+#define FP_REG_SIZE 0x70
+
+#endif
+
+#define DC_PAL_SIZE 0x105
+
+struct geoderegs {
+
+	struct {
+		u64 padsel;
+		u64 dotpll;
+
+#ifdef _GEODELX_
+		u64 dfglcfg;
+		u64 dcspare;
+#else
+		u64 rstpll;
+#endif
+	} msr;
+
+	union {
+		unsigned char b[GP_REG_SIZE];
+		struct {
+			u32 dst_offset;         /* 0x00 */
+			u32 src_offset;         /* 0x04 */
+			u32 stride;             /* 0x08 */
+			u32 wid_height;         /* 0x0C */
+			u32 src_color_fg;       /* 0x10 */
+			u32 src_color_bg;       /* 0x14 */
+			u32 pat_color_0;        /* 0x18 */
+			u32 pat_color_1;        /* 0x1C */
+			u32 pat_color_2;        /* 0x20 */
+			u32 pat_color_3;        /* 0x24 */
+			u32 pat_color_4;        /* 0x28 */
+			u32 pat_color_5;        /* 0x2C */
+			u32 pat_data_0;         /* 0x30 */
+			u32 pat_data_1;         /* 0x34 */
+			u32 raster_mode;        /* 0x38 */
+			u32 vector_mode;        /* 0x3C */
+			u32 blt_mode;           /* 0x40 */
+			u32 blit_status;        /* 0x4C */
+			u32 hst_src;            /* 0x48 */
+			u32 base_offset;        /* 0x4C */
+
+#ifdef _GEODELX_
+			u32 cmd_top;            /* 0x50 */
+			u32 cmd_bot;            /* 0x54 */
+			u32 cmd_read;           /* 0x58 */
+			u32 cmd_write;          /* 0x5C */
+			u32 ch3_offset;         /* 0x60 */
+			u32 ch3_mode_str;       /* 0x64 */
+			u32 ch3_width;          /* 0x68 */
+			u32 ch3_hsrc;           /* 0x6C */
+			u32 lut_index;          /* 0x70 */
+			u32 lut_data;           /* 0x74 */
+			u32 int_cntrl;          /* 0x78 */
+#endif
+		} r;
+	} gp;
+
+	union {
+		unsigned char b[DC_REG_SIZE];
+
+		struct {
+			u32 unlock;             /* 0x00 */
+			u32 gcfg;               /* 0x04 */
+			u32 dcfg;               /* 0x08 */
+			u32 arb;                /* 0x0C */
+			u32 fb_st_offset;       /* 0x10 */
+			u32 cb_st_offset;       /* 0x14 */
+			u32 curs_st_offset;     /* 0x18 */
+			u32 icon_st_offset;     /* 0x1C */
+			u32 vid_y_st_offset;    /* 0x20 */
+			u32 vid_u_st_offset;    /* 0x24 */
+			u32 vid_v_st_offset;    /* 0x28 */
+			u32 dctop;              /* 0x2c */
+			u32 line_size;          /* 0x30 */
+			u32 gfx_pitch;          /* 0x34 */
+			u32 vid_yuv_pitch;      /* 0x38 */
+			u32 rsvd2;              /* 0x3C */
+			u32 h_active_timing;    /* 0x40 */
+			u32 h_blank_timing;     /* 0x44 */
+			u32 h_sync_timing;      /* 0x48 */
+			u32 rsvd3;              /* 0x4C */
+			u32 v_active_timing;    /* 0x50 */
+			u32 v_blank_timing;     /* 0x54 */
+			u32 v_sync_timing;      /* 0x58 */
+			u32 fbactive;           /* 0x5C */
+			u32 dc_cursor_x;        /* 0x60 */
+			u32 dc_cursor_y;        /* 0x64 */
+			u32 dc_icon_x;          /* 0x68 */
+			u32 dc_line_cnt;        /* 0x6C */
+			u32 rsvd5;              /* 0x70 - palette address */
+			u32 rsvd6;              /* 0x74 - palette data */
+			u32 dfifo_diag;         /* 0x78 */
+			u32 cfifo_diag;         /* 0x7C */
+			u32 dc_vid_ds_delta;    /* 0x80 */
+			u32 gliu0_mem_offset;   /* 0x84 */
+			u32 dv_ctl;             /* 0x88 - added by LX */
+			u32 dv_acc;             /* 0x8C */
+
+#ifdef _GEODELX_
+			u32 gfx_scale;
+			u32 irq_filt_ctl;
+			u32 filt_coeff1;
+			u32 filt_coeff2;
+			u32 vbi_event_ctl;
+			u32 vbi_odd_ctl;
+			u32 vbi_hor;
+			u32 vbi_ln_odd;
+			u32 vbi_ln_event;
+			u32 vbi_pitch;
+			u32 clr_key;
+			u32 clr_key_mask;
+			u32 clr_key_x;
+			u32 clr_key_y;
+			u32 irq;
+			u32 rsvd8;
+			u32 genlk_ctrl;
+			u32 vid_even_y_st_offset;    /* 0xD8 */
+			u32 vid_even_u_st_offset;    /* 0xDC */
+			u32 vid_even_v_st_offset;    /* 0xE0 */
+			u32 v_active_even_timing;    /* 0xE4 */
+			u32 v_blank_even_timing;     /* 0xE8 */
+			u32 v_sync_even_timing;      /* 0xEC */
+#endif
+		} r;
+	} dc;
+
+	union {
+		unsigned char b[VP_REG_SIZE];
+
+		struct {
+			u64 vcfg;               /* 0x00 */
+			u64 dcfg;               /* 0x08 */
+			u64 vx;                 /* 0x10 */
+			u64 vy;                 /* 0x18 */
+			u64 vs;                 /* 0x20 */
+			u64 vck;                /* 0x28 */
+			u64 vcm;                /* 0x30 */
+			u64 rsvd1;              /* 0x38 - Gamma address*/
+			u64 rsvd2;              /* 0x40 - Gamma data*/
+			u64 rsvd3;              /* 0x48 */
+			u64 misc;               /* 0x50 */
+			u64 ccs;                /* 0x58 */
+			u64 rsvd4[3];           /* 0x60-0x70 */
+			u64 vdc;                /* 0x78 */
+			u64 vco;                /* 0x80 */
+			u64 crc;                /* 0x88 */
+			u64 crc32;              /* 0x90 */
+			u64 vde;                /* 0x98 */
+			u64 cck;                /* 0xA0 */
+			u64 ccm;                /* 0xA8 */
+			u64 cc1;                /* 0xB0 */
+			u64 cc2;                /* 0xB8 */
+			u64 a1x;                /* 0xC0 */
+			u64 a1y;                /* 0xC8 */
+			u64 a1c;                /* 0xD0 */
+			u64 a1t;                /* 0xD8 */
+			u64 a2x;                /* 0xE0 */
+			u64 a2y;                /* 0xE8 */
+			u64 a2c;                /* 0xF0 */
+			u64 a2t;                /* 0xF8 */
+			u64 a3x;                /* 0x100 */
+			u64 a3y;                /* 0x108 */
+			u64 a3c;                /* 0x110 */
+			u64 a3t;                /* 0x118 */
+			u64 vrr;                /* 0x120 */
+			u64 awt;                /* 0x128 */
+			u64 vtm;                /* 0x130 */
+#ifdef _GEODELX_
+			u64 vye;                /* 0x138 */
+			u64 a1ye;               /* 0x140 */
+			u32 a2ye;               /* 0x148 */
+			u32 a3ye;	        /* 0x150 */
+#endif
+		} r;
+	} vp;
+
+	union {
+		unsigned char b[FP_REG_SIZE];
+
+		struct {
+			u64 pt1;                /* 0x400 */
+			u64 pt2;                /* 0x408 */
+			u64 pm;                 /* 0x410 */
+			u64 dfc;                /* 0x418 */
+			u64 blfsr;              /* 0x420 */
+			u64 rlfsr;              /* 0x428 */
+			u64 fmi;                /* 0x430 */
+			u64 fmd;                /* 0x438 */
+			u64 rsvd;               /* 0x440 */
+			u64 dca;                /* 0x448 */
+			u64 dmd;                /* 0x450 */
+			u64 crc;                /* 0x458 */
+			u64 fbb;                /* 0x460 */
+			u64 crc32;              /* 0x468 */
+		} r;
+	} fp;
+
+	u32 pal[DC_PAL_SIZE];
+	u32 gamma[256];
+};
+
+#endif
diff --git a/drivers/video/geode/geodefb.h b/drivers/video/geode/geodefb.h
index ae04820..0214d11 100644
--- a/drivers/video/geode/geodefb.h
+++ b/drivers/video/geode/geodefb.h
@@ -12,6 +12,10 @@
 #ifndef __GEODEFB_H__
 #define __GEODEFB_H__
 
+#define FB_POWER_STATE_OFF      0
+#define FB_POWER_STATE_SUSPEND  1
+#define FB_POWER_STATE_ON       2
+
 struct geodefb_info;
 
 struct geode_dc_ops {
@@ -21,18 +25,24 @@ struct geode_dc_ops {
 
 struct geode_vid_ops {
 	void (*set_dclk)(struct fb_info *);
+	unsigned int (*get_dclk)(struct fb_info *);
 	void (*configure_display)(struct fb_info *);
 	int  (*blank_display)(struct fb_info *, int blank_mode);
 };
 
 struct geodefb_par {
 	int enable_crt;
+	int fbactive;  /* True if the current console is in KD_GRAPHICS mode */
 	int panel_x; /* dimensions of an attached flat panel, non-zero => enable panel */
 	int panel_y;
+	unsigned int curdclk;  /* Used by GX to avoid unnessesary clock switching */
 	void __iomem *dc_regs;
 	void __iomem *vid_regs;
+	void __iomem *gp_regs;
 	struct geode_dc_ops  *dc_ops;
 	struct geode_vid_ops *vid_ops;
+
+	int state;
 };
 
 #endif /* !__GEODEFB_H__ */
diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c
index cf841ef..3eabc53 100644
--- a/drivers/video/geode/gxfb_core.c
+++ b/drivers/video/geode/gxfb_core.c
@@ -30,12 +30,31 @@
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <linux/notifier.h>
+#include <linux/vt_kern.h>
+#include <linux/console.h>
+#include <asm/uaccess.h>
+#include <asm/olpc.h>
 
 #include "geodefb.h"
 #include "display_gx.h"
 #include "video_gx.h"
 
+#define FBIOSGAMMA		_IOW('F', 0x20, void *)
+#define FBIOGGAMMA		_IOW('F', 0x21, void *)
+
+#ifdef DEBUG
+
+#define FBIODUMPGP		_IOW('F', 0x22, void *)
+#define FBIODUMPDC		_IOW('F', 0x23, void *)
+#define FBIODUMPVP		_IOW('F', 0x24, void *)
+#define FBIODUMPFP		_IOW('F', 0x25, void *)
+
+#endif
+
 static char *mode_option;
+static int noclear;
+struct fb_info *gxfb_info;
 
 /* Modes relevant to the GX (taken from modedb.c) */
 static const struct fb_videomode gx_modedb[] __initdata = {
@@ -103,8 +122,20 @@ static const struct fb_videomode gx_modedb[] __initdata = {
 	{ NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3,
 	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 1200x900-75 - CRT timings for the OLPC mode */
+	{ NULL, 75, 1200, 900, 8049, 104, 240, 29, 54, 136, 3,
+	  0, FB_VMODE_NONINTERLACED, 0 }
 };
 
+#ifdef CONFIG_OLPC
+static const struct fb_videomode gx_dcon_modedb[] __initdata = {
+	/* The only mode the DCON has is 1200x900 */
+	{ NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
+	  0, FB_VMODE_NONINTERLACED, 0 }
+};
+#endif
+
+
 static int gxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 {
 	if (var->xres > 1600 || var->yres > 1200)
@@ -137,7 +168,7 @@ static int gxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 	return 0;
 }
 
-static int gxfb_set_par(struct fb_info *info)
+int gxfb_set_par(struct fb_info *info)
 {
 	struct geodefb_par *par = info->par;
 
@@ -204,16 +235,26 @@ static int gxfb_blank(int blank_mode, struct fb_info *info)
 	return par->vid_ops->blank_display(info, blank_mode);
 }
 
+static int fbsize;
+
 static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *dev)
 {
 	struct geodefb_par *par = info->par;
-	int fb_len;
 	int ret;
 
 	ret = pci_enable_device(dev);
 	if (ret < 0)
 		return ret;
 
+	ret = pci_request_region(dev, 1, "gxfb (graphics processor)");
+	if (ret < 0)
+		return ret;
+
+	par->gp_regs = ioremap(pci_resource_start(dev, 1),
+				pci_resource_len(dev, 1));
+	if (!par->gp_regs)
+		return -ENOMEM;
+
 	ret = pci_request_region(dev, 3, "gxfb (video processor)");
 	if (ret < 0)
 		return ret;
@@ -232,36 +273,118 @@ static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *de
 	ret = pci_request_region(dev, 0, "gxfb (framebuffer)");
 	if (ret < 0)
 		return ret;
-	if ((fb_len = gx_frame_buffer_size()) < 0)
-		return -ENOMEM;
+
+	/* If the fbsize wasn't specified then try to probe it */
+
+	if (!fbsize) {
+		fbsize = gx_frame_buffer_size();
+		if (fbsize == 0)
+			return -ENOMEM;
+	}
+
 	info->fix.smem_start = pci_resource_start(dev, 0);
-	info->fix.smem_len = fb_len;
+	info->fix.smem_len = fbsize;
 	info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
 	if (!info->screen_base)
 		return -ENOMEM;
 
-	/* Set the 16MB aligned base address of the graphics memory region
+	/* Set the 16MiB aligned base address of the graphics memory region
 	 * in the display controller */
 
 	writel(info->fix.smem_start & 0xFF000000,
 			par->dc_regs + DC_GLIU0_MEM_OFFSET);
 
-	dev_info(&dev->dev, "%d Kibyte of video memory at 0x%lx\n",
+	dev_info(&dev->dev, "%d KiB of video memory at 0x%lx\n",
 		 info->fix.smem_len / 1024, info->fix.smem_start);
 
 	return 0;
 }
 
+static int gxfb_ioctl( struct fb_info *info, unsigned int cmd,
+		       unsigned long arg)
+{
+	unsigned int gamma[GXFB_GAMMA_DWORDS];
+	int ret = -EINVAL;
+	struct geodefb_par *par = info->par;
+	int i;
+
+	switch(cmd) {
+	case FBIOSGAMMA:
+		/* Read the gamma information from the user - 256 dwords */
+
+		if (copy_from_user(gamma, (void * __user) arg, GXFB_GAMMA_SIZE))
+			return -EFAULT;
+
+		writel(0, par->vid_regs + GX_GAR);
+
+		/* Sequential writes to the data register will increment the
+		   address automatically  */
+
+		for(i = 0; i < GXFB_GAMMA_DWORDS; i++)
+			writel(gamma[i] & 0xFFFFFF, par->vid_regs + GX_GDR);
+
+		writel(readl(par->vid_regs + GX_MISC) & ~GX_MISC_GAM_EN,
+		       par->vid_regs + GX_MISC);
+
+		ret = 0;
+		break;
+
+	case FBIOGGAMMA:
+		if (readl(par->vid_regs + GX_MISC) & GX_MISC_GAM_EN)
+			return -EINVAL;
+
+		memset(gamma, 0, GXFB_GAMMA_SIZE);
+		writel(0, par->vid_regs + GX_GAR);
+
+		for(i = 0; i < GXFB_GAMMA_DWORDS;i++)
+			gamma[i] = readl(par->vid_regs + GX_GDR);
+
+		if (copy_to_user((void * __user) arg, gamma, GXFB_GAMMA_SIZE))
+			ret = -EFAULT;
+		else
+			ret = 0;
+
+		break;
+
+#ifdef DEBUG
+	case FBIODUMPGP:
+		ret = 0;
+		dump_regs(info, 0);
+		break;
+		
+	case FBIODUMPDC:
+		ret = 0;
+		dump_regs(info, 1);
+		break;
+
+	case FBIODUMPVP:
+		ret = 0;
+		dump_regs(info, 2);
+		break;
+
+	case FBIODUMPFP:
+		ret = 0;
+		dump_regs(info, 3);
+		break;
+#endif
+	}
+
+	return ret;
+}
+
 static struct fb_ops gxfb_ops = {
 	.owner		= THIS_MODULE,
 	.fb_check_var	= gxfb_check_var,
 	.fb_set_par	= gxfb_set_par,
 	.fb_setcolreg	= gxfb_setcolreg,
 	.fb_blank       = gxfb_blank,
+	.fb_ioctl       = gxfb_ioctl,
 	/* No HW acceleration for now. */
 	.fb_fillrect	= cfb_fillrect,
 	.fb_copyarea	= cfb_copyarea,
 	.fb_imageblit	= cfb_imageblit,
+	.fb_powerdown   = gxfb_powerdown,
+	.fb_powerup     = gxfb_powerup,
 };
 
 static struct fb_info * __init gxfb_init_fbinfo(struct device *dev)
@@ -303,23 +426,86 @@ static struct fb_info * __init gxfb_init_fbinfo(struct device *dev)
 	return info;
 }
 
-static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+static int gxfb_console_notify(struct notifier_block *self,
+				unsigned long action, void *data)
+{
+	if (gxfb_info != NULL) {
+		struct geodefb_par *par = gxfb_info->par;
+		par->fbactive = (action == CONSOLE_EVENT_SWITCH_TEXT) ? 0 : 1;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block gxfb_console_notifier = {
+	.notifier_call = gxfb_console_notify
+};
+
+#ifdef CONFIG_PM
+
+static int gxfb_suspend(struct pci_dev *pdev,  pm_message_t state)
+{
+	struct fb_info *info = pci_get_drvdata(pdev);
+	struct geodefb_par *par = info->par;
+
+	if (pdev->dev.power.power_state.event == state.event)
+		return 0;
+
+	if (state.event == PM_EVENT_SUSPEND) {
+	 
+		acquire_console_sem();
+		gxfb_powerdown(info);
+
+		par->state = FB_POWER_STATE_OFF;
+		fb_set_suspend(info, 1);
+		
+		release_console_sem();
+	}
+
+	pdev->dev.power.power_state = state;
+	return 0;
+}
+
+static int gxfb_resume(struct pci_dev *pdev)
+{
+	struct fb_info *info = pci_get_drvdata(pdev);
+
+	acquire_console_sem();
+	
+	/* Turn the engine completely on */
+
+	if (gxfb_powerup(info))
+	  printk(KERN_ERR "gxfb:  Powerup failed\n");
+
+	fb_set_suspend(info, 0);
+	release_console_sem();
+
+	pdev->dev.power.power_state = PMSG_ON;
+        return 0;
+}
+#endif
+
+static int __init gxfb_probe(struct pci_dev *pdev,
+			     const struct pci_device_id *id)
 {
 	struct geodefb_par *par;
-	struct fb_info *info;
 	int ret;
 	unsigned long val;
 
-	info = gxfb_init_fbinfo(&pdev->dev);
-	if (!info)
+	struct fb_videomode *modedb_ptr;
+	int modedb_size;
+
+	gxfb_info = gxfb_init_fbinfo(&pdev->dev);
+	if (gxfb_info == NULL)
 		return -ENOMEM;
-	par = info->par;
+
+	par = gxfb_info->par;
 
 	/* GX display controller and GX video device. */
 	par->dc_ops  = &gx_dc_ops;
 	par->vid_ops = &gx_vid_ops;
 
-	if ((ret = gxfb_map_video_memory(info, pdev)) < 0) {
+	if ((ret = gxfb_map_video_memory(gxfb_info, pdev)) < 0) {
 		dev_err(&pdev->dev, "failed to map frame buffer or controller registers\n");
 		goto err;
 	}
@@ -333,32 +519,60 @@ static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *i
 	else
 		par->enable_crt = 1;
 
-	ret = fb_find_mode(&info->var, info, mode_option,
-			   gx_modedb, ARRAY_SIZE(gx_modedb), NULL, 16);
+	/* Get the current dotclock */
+
+	par->curdclk = (par->vid_ops->get_dclk) ? par->vid_ops->get_dclk(gxfb_info) : 0;
+
+	/* We need to determine a display mode right now, so we will
+	 * check to see if the DCON was previously detected by the BIOS
+	 * and use that to make our mode database decision.
+	 */
+
+	modedb_ptr = (struct fb_videomode *) gx_modedb;
+	modedb_size = ARRAY_SIZE(gx_modedb);
+
+#ifdef CONFIG_OLPC
+	if (olpc_has_dcon()) {
+		modedb_ptr = (struct fb_videomode *) gx_dcon_modedb;
+		modedb_size = ARRAY_SIZE(gx_dcon_modedb);
+	}
+#endif
+
+	ret = fb_find_mode(&gxfb_info->var, gxfb_info, mode_option,
+			   modedb_ptr, modedb_size, NULL, 16);
+
 	if (ret == 0 || ret == 4) {
 		dev_err(&pdev->dev, "could not find valid video mode\n");
 		ret = -EINVAL;
 		goto err;
 	}
 
+	/* Clear the screen of garbage, unless noclear was specified,
+	 * in which case we assume the user knows what he is doing */
+
+	if (!noclear)
+		memset_io(gxfb_info->screen_base, 0, gxfb_info->fix.smem_len);
+
+	gxfb_check_var(&gxfb_info->var, gxfb_info);
+	gxfb_set_par(gxfb_info);
+
+	/* We are powered up */
+	par->state = FB_POWER_STATE_ON;
 
-	/* Clear the frame buffer of garbage. */
-        memset_io(info->screen_base, 0, info->fix.smem_len);
 
-	gxfb_check_var(&info->var, info);
-	gxfb_set_par(info);
+	console_event_register(&gxfb_console_notifier);
 
-	if (register_framebuffer(info) < 0) {
+	if (register_framebuffer(gxfb_info) < 0) {
 		ret = -EINVAL;
 		goto err;
 	}
-	pci_set_drvdata(pdev, info);
-	printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id);
+	pci_set_drvdata(pdev, gxfb_info);
+	printk(KERN_INFO "fb%d: %s frame buffer device\n", gxfb_info->node, gxfb_info->fix.id);
 	return 0;
 
   err:
-	if (info->screen_base) {
-		iounmap(info->screen_base);
+	if (gxfb_info->screen_base) {
+		iounmap(gxfb_info->screen_base);
 		pci_release_region(pdev, 0);
 	}
 	if (par->vid_regs) {
@@ -370,8 +584,9 @@ static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *i
 		pci_release_region(pdev, 2);
 	}
 
-	if (info)
-		framebuffer_release(info);
+	if (gxfb_info)
+		framebuffer_release(gxfb_info);
+
 	return ret;
 }
 
@@ -397,9 +612,7 @@ static void gxfb_remove(struct pci_dev *pdev)
 }
 
 static struct pci_device_id gxfb_id_table[] = {
-	{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO,
-	  PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16,
-	  0xff0000, 0 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO) },
 	{ 0, }
 };
 
@@ -410,22 +623,30 @@ static struct pci_driver gxfb_driver = {
 	.id_table	= gxfb_id_table,
 	.probe		= gxfb_probe,
 	.remove		= gxfb_remove,
+#ifdef CONFIG_PM
+	.suspend        = gxfb_suspend,
+	.resume         = gxfb_resume
+#endif
 };
 
 #ifndef MODULE
-static int __init gxfb_setup(char *options)
-{
+static int __init gxfb_setup(char *options) {
 
 	char *opt;
 
 	if (!options || !*options)
 		return 0;
 
-	while ((opt = strsep(&options, ",")) != NULL) {
+	while((opt = strsep(&options, ",")) != NULL) {
 		if (!*opt)
 			continue;
 
-		mode_option = opt;
+		if (!strncmp(opt, "fbsize:", 7))
+			fbsize = simple_strtoul(opt+7, NULL, 0);
+		else if (!strcmp(opt, "noclear"))
+			noclear = 1;
+		else
+			mode_option = opt;
 	}
 
 	return 0;
@@ -444,7 +665,6 @@ static int __init gxfb_init(void)
 #endif
 	return pci_register_driver(&gxfb_driver);
 }
-
 static void __exit gxfb_cleanup(void)
 {
 	pci_unregister_driver(&gxfb_driver);
@@ -456,5 +676,8 @@ module_exit(gxfb_cleanup);
 module_param(mode_option, charp, 0);
 MODULE_PARM_DESC(mode_option, "video mode (<x>x<y>[-<bpp>][@<refr>])");
 
+module_param(fbsize, int, 0);
+MODULE_PARM_DESC(fbsize, "video memory size");
+
 MODULE_DESCRIPTION("Framebuffer driver for the AMD Geode GX");
 MODULE_LICENSE("GPL");
diff --git a/drivers/video/geode/lxfb.h b/drivers/video/geode/lxfb.h
index 6c227f9..5be8a4d 100644
--- a/drivers/video/geode/lxfb.h
+++ b/drivers/video/geode/lxfb.h
@@ -25,10 +25,23 @@ void lx_set_mode(struct fb_info *);
 void lx_get_gamma(struct fb_info *, unsigned int *, int);
 void lx_set_gamma(struct fb_info *, unsigned int *, int);
 unsigned int lx_framebuffer_size(void);
+int lx_shutdown(struct fb_info *);
+int lx_powerup(struct fb_info *);
 int lx_blank_display(struct fb_info *, int);
 void lx_set_palette_reg(struct fb_info *, unsigned int, unsigned int,
 			unsigned int, unsigned int);
 
+
+
+/* ioctl() defines */
+
+#define FBIOSGAMMA              _IOW('F', 0x20, void *)
+#define FBIOGGAMMA              _IOW('F', 0x21, void *)
+
+/* General definitions */
+#define LXFB_GAMMA_DWORDS 256 /* number of dwords in the gamma ram */
+#define LXFB_GAMMA_SIZE (LXFB_GAMMA_DWORDS * sizeof(unsigned int))
+
 /* MSRS */
 
 #define MSR_LX_GLD_CONFIG    0x48002001
diff --git a/drivers/video/geode/lxfb_core.c b/drivers/video/geode/lxfb_core.c
index 5e30b40..c9060ed 100644
--- a/drivers/video/geode/lxfb_core.c
+++ b/drivers/video/geode/lxfb_core.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/uaccess.h>
+#include <asm/olpc.h>
 
 #include "lxfb.h"
 
@@ -35,186 +36,84 @@ static int fbsize;
  */
 
 const struct fb_videomode geode_modedb[] __initdata = {
-	/* 640x480-60 */
-	{ NULL, 60, 640, 480, 39682, 48, 8, 25, 2, 88, 2,
+	/* 640x480-60 VESA */
+	{ NULL, 60, 640, 480, 39682,  48, 16, 33, 10, 96, 2,
+	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 640x480-75 VESA */
+	{ NULL, 75, 640, 480, 31746, 120, 16, 16, 01, 64, 3,
+	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 640x480-85 VESA */
+	{ NULL, 85, 640, 480, 27777, 80, 56, 25, 01, 56, 3,
+	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 800x600-60 VESA */
+	{ NULL, 60, 800, 600, 25000, 88, 40, 23, 01, 128, 4,
 	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	  FB_VMODE_NONINTERLACED, 0 },
-	/* 640x400-70 */
-	{ NULL, 70, 640, 400, 39770, 40, 8, 28, 5, 96, 2,
-	  FB_SYNC_HOR_HIGH_ACT,
-	  FB_VMODE_NONINTERLACED, 0 },
-	/* 640x480-70 */
-	{ NULL, 70, 640, 480, 35014, 88, 24, 15, 2, 64, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 640x480-72 */
-	{ NULL, 72, 640, 480, 32102, 120, 16, 20, 1, 40, 3,
+	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 800x600-75 VESA */
+	{ NULL, 75, 800, 600, 20202, 160, 16, 21, 01, 80, 3,
 	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	  FB_VMODE_NONINTERLACED, 0 },
-	/* 640x480-75 */
-	{ NULL, 75, 640, 480, 31746, 120, 16, 16, 1, 64, 3,
+	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 800x600-85 VESA */
+	{ NULL, 85, 800, 600, 17761, 152, 32, 27, 01, 64, 3,
 	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	  FB_VMODE_NONINTERLACED, 0 },
-	/* 640x480-85 */
-	{ NULL, 85, 640, 480, 27780, 80, 56, 25, 1, 56, 3,
+	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 1024x768-60 VESA */
+	{ NULL, 60, 1024, 768, 15384, 160, 24, 29, 3, 136, 6,
+	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 1024x768-75 VESA */
+	{ NULL, 75, 1024, 768, 12690, 176, 16, 28, 1, 96, 3,
 	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	  FB_VMODE_NONINTERLACED, 0 },
-	/* 640x480-90 */
-	{ NULL, 90, 640, 480, 26392, 96, 32, 22, 1, 64, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 640x480-100 */
-	{ NULL, 100, 640, 480, 23167, 104, 40, 25, 1, 64, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 640x480-60 */
-	{ NULL, 60, 640, 480, 39682, 48, 16, 25, 10, 88, 2,
+	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 1024x768-85 VESA */
+	{ NULL, 85, 1024, 768, 10582, 208, 48, 36, 1, 96, 3,
 	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	  FB_VMODE_NONINTERLACED, 0 },
-	/* 800x600-56 */
-	{ NULL, 56, 800, 600, 27901, 128, 24, 22, 1, 72, 2,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 800x600-60 */
-	{ NULL, 60, 800, 600, 25131, 72, 32, 23, 1, 136, 4,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 800x600-70 */
-	{ NULL, 70, 800, 600, 21873, 120, 40, 21, 4, 80, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 800x600-72 */
-	{ NULL, 72, 800, 600, 20052, 64, 56, 23, 37, 120, 6,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 800x600-75 */
-	{ NULL, 75, 800, 600, 20202, 160, 16, 21, 1, 80, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 800x600-85 */
-	{ NULL, 85, 800, 600, 17790, 152, 32, 27, 1, 64, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 800x600-90 */
-	{ NULL, 90, 800, 600, 16648, 128, 40, 28, 1, 88, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 800x600-100 */
-	{ NULL, 100, 800, 600, 14667, 136, 48, 27, 1, 88, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 800x600-60 */
-	{ NULL, 60, 800, 600, 25131, 88, 40, 23, 1, 128, 4,
+	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 1280x960-60 VESA */
+	{ NULL, 60, 1280, 960, 9259, 312, 96, 36, 1, 112, 3,
 	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	  FB_VMODE_NONINTERLACED, 0 },
-	/* 1024x768-60 */
-	{ NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6,
+	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 1280x960-85 VESA */
+	{ NULL, 85, 1280, 960, 6734, 224, 64, 47, 1, 160, 3,
 	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	  FB_VMODE_NONINTERLACED, 0 },
-	/* 1024x768-70 */
-	{ NULL, 70, 1024, 768, 13346, 144, 24, 29, 3, 136, 6,
+	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 1280x1024-60 VESA */
+	{ NULL, 60, 1280, 1024, 9259, 248, 48, 38, 1, 112, 3,
 	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	  FB_VMODE_NONINTERLACED, 0 },
-	/* 1024x768-72 */
-	{ NULL, 72, 1024, 768, 12702, 168, 56, 29, 4, 112, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1024x768-75 */
-	{ NULL, 75, 1024, 768, 12703, 176, 16, 28, 1, 96, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1024x768-85 */
-	{ NULL, 85, 1024, 768, 10581, 208, 48, 36, 1, 96, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1024x768-90 */
-	{ NULL, 90, 1024, 768, 9981, 176, 64, 37, 1, 112, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1024x768-100 */
-	{ NULL, 100, 1024, 768, 8825, 184, 72, 42, 1, 112, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1024x768-60 */
-	{ NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6,
+	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 1280x1024-75 VESA */
+	{ NULL, 75, 1280, 1024, 7407, 248, 16, 38, 1, 144, 3,
 	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	  FB_VMODE_NONINTERLACED, 0 },
-	/* 1152x864-60 */
-	{ NULL, 60, 1152, 864, 12251, 184, 64, 27, 1, 120, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1152x864-70 */
-	{ NULL, 70, 1152, 864, 10254, 192, 72, 32, 8, 120, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1152x864-72 */
-	{ NULL, 72, 1152, 864, 9866, 200, 72, 33, 7, 128, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1152x864-75 */
-	{ NULL, 75, 1152, 864, 9259, 256, 64, 32, 1, 128, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1152x864-85 */
-	{ NULL, 85, 1152, 864, 8357, 200, 72, 37, 3, 128, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1152x864-90 */
-	{ NULL, 90, 1152, 864, 7719, 208, 80, 42, 9, 128, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1152x864-100 */
-	{ NULL, 100, 1152, 864, 6947, 208, 80, 48, 3, 128, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1152x864-60 */
-	{ NULL, 60, 1152, 864, 12251, 184, 64, 27, 1, 120, 3,
+	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 1280x1024-85 VESA */
+	{ NULL, 85, 1280, 1024, 6349, 224, 64, 44, 1, 160, 3,
 	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	  FB_VMODE_NONINTERLACED, 0 },
-	/* 1280x1024-60 */
-	{ NULL, 60, 1280, 1024, 9262, 248, 48, 38, 1, 112, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1280x1024-70 */
-	{ NULL, 70, 1280, 1024, 7719, 224, 88, 38, 6, 136, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1280x1024-72 */
-	{ NULL, 72, 1280, 1024, 7490, 224, 88, 39, 7, 136, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1280x1024-75 */
-	{ NULL, 75, 1280, 1024, 7409, 248, 16, 38, 1, 144, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1280x1024-85 */
-	{ NULL, 85, 1280, 1024, 6351, 224, 64, 44, 1, 160, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1280x1024-90 */
-	{ NULL, 90, 1280, 1024, 5791, 240, 96, 51, 12, 144, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1280x1024-100 */
-	{ NULL, 100, 1280, 1024, 5212, 240, 96, 57, 6, 144, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1280x1024-60 */
-	{ NULL, 60, 1280, 1024, 9262, 248, 48, 38, 1, 112, 3,
-	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	  FB_VMODE_NONINTERLACED, 0 },
-	/* 1600x1200-60 */
+	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 1600x1200-60 VESA */
 	{ NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1600x1200-70 */
-	{ NULL, 70, 1600, 1200, 5291, 304, 64, 46, 1, 192, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1600x1200-72 */
-	{ NULL, 72, 1600, 1200, 5053, 288, 112, 47, 13, 176, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1600x1200-75 */
+	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 1600x1200-75 VESA */
 	{ NULL, 75, 1600, 1200, 4938, 304, 64, 46, 1, 192, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1600x1200-85 */
+	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 1600x1200-85 VESA */
 	{ NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1600x1200-90 */
-	{ NULL, 90, 1600, 1200, 3981, 304, 128, 60, 1, 176, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1600x1200-100 */
-	{ NULL, 100, 1600, 1200, 3563, 304, 128, 67, 1, 176, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1600x1200-60 */
-	{ NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3,
 	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	  FB_VMODE_NONINTERLACED, 0 },
-	/* 1920x1440-60 */
-	{ NULL, 60, 1920, 1440, 4273, 344, 128, 56, 1, 208, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1920x1440-70 */
-	{ NULL, 70, 1920, 1440, 3593, 360, 152, 55, 8, 208, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1920x1440-72 */
-	{ NULL, 72, 1920, 1440, 3472, 360, 152, 68, 4, 208, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1920x1440-75 */
-	{ NULL, 75, 1920, 1440, 3367, 352, 144, 56, 1, 224, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
-	/* 1920x1440-85 */
-	{ NULL, 85, 1920, 1440, 2929, 368, 152, 68, 1, 216, 3,
-	  0, FB_VMODE_NONINTERLACED, 0 },
+	  FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 1200x900-75 - CRT timings for the OLPC mode */
+	{ NULL, 75, 1200, 900, 8049, 104, 240, 29, 54, 136, 3,
+	  0, FB_VMODE_NONINTERLACED, 0 }
 };
 
+#ifdef CONFIG_OLPC
+const struct fb_videomode olpc_dcon_modedb[] __initdata = {
+	/* The only mode the DCON has is 1200x900 */
+	{ NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
+	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	  FB_VMODE_NONINTERLACED, 0 }
+};
+#endif
+
 static int lxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 {
 	if (var->xres > 1920 || var->yres > 1440)
@@ -379,16 +278,55 @@ static int __init lxfb_map_video_memory(struct fb_info *info,
 	return 0;
 }
 
+static int lxfb_set_gamma(struct fb_info *info, void * __user data)
+{
+	unsigned int gamma[LXFB_GAMMA_DWORDS];
+
+	if (copy_from_user(gamma, data, LXFB_GAMMA_SIZE))
+		return -EFAULT;
+
+	lx_set_gamma(info, gamma, LXFB_GAMMA_SIZE);
+	return 0;
+}
+
+static int lxfb_get_gamma(struct fb_info *info, void * __user data)
+{
+	unsigned int gamma[LXFB_GAMMA_DWORDS];
+	memset(gamma, 0, sizeof(gamma));
+
+	lx_get_gamma(info, gamma, LXFB_GAMMA_DWORDS);
+
+	return copy_to_user(data, gamma, LXFB_GAMMA_SIZE) ?
+		-EFAULT : 0;
+}
+
+static int lxfb_ioctl( struct fb_info *info, unsigned int cmd,
+		       unsigned long arg)
+{
+	switch(cmd) {
+	case FBIOSGAMMA:
+		return lxfb_set_gamma(info, (void * __user) arg);
+
+	case FBIOGGAMMA:
+		return lxfb_get_gamma(info, (void * __user) arg);
+	}
+
+	return -ENOTTY;
+}
+
 static struct fb_ops lxfb_ops = {
 	.owner		= THIS_MODULE,
 	.fb_check_var	= lxfb_check_var,
 	.fb_set_par	= lxfb_set_par,
 	.fb_setcolreg	= lxfb_setcolreg,
 	.fb_blank       = lxfb_blank,
+	.fb_ioctl       = lxfb_ioctl,
 	/* No HW acceleration for now. */
 	.fb_fillrect	= cfb_fillrect,
 	.fb_copyarea	= cfb_copyarea,
 	.fb_imageblit	= cfb_imageblit,
+	.fb_powerdown	= lx_shutdown,
+	.fb_powerup	= lx_powerup,
 };
 
 static struct fb_info * __init lxfb_init_fbinfo(struct device *dev)
@@ -431,6 +369,45 @@ static struct fb_info * __init lxfb_init_fbinfo(struct device *dev)
 	return info;
 }
 
+#ifdef CONFIG_PM
+
+static int lxfb_suspend(struct pci_dev *pdev,  pm_message_t state)
+{
+	struct fb_info *info = pci_get_drvdata(pdev);
+
+	if (pdev->dev.power.power_state.event == state.event)
+		return 0;
+
+	if (state.event == PM_EVENT_SUSPEND) {
+
+		acquire_console_sem();
+		lx_shutdown(info);
+		fb_set_suspend(info, 1);
+		release_console_sem();
+	}
+
+	pdev->dev.power.power_state = state;
+	return 0;
+}
+
+static int lxfb_resume(struct pci_dev *pdev)
+{
+	struct fb_info *info = pci_get_drvdata(pdev);
+
+	acquire_console_sem();
+
+	/* Turn the engine completely on */
+
+	lx_powerup(info);
+	fb_set_suspend(info, 0);
+	release_console_sem();
+
+	pdev->dev.power.power_state = PMSG_ON;
+        return 0;
+}
+
+#endif
+
 static int __init lxfb_probe(struct pci_dev *pdev,
 			     const struct pci_device_id *id)
 {
@@ -467,6 +444,13 @@ static int __init lxfb_probe(struct pci_dev *pdev,
 	modedb_ptr = (struct fb_videomode *) geode_modedb;
 	modedb_size = ARRAY_SIZE(geode_modedb);
 
+#ifdef CONFIG_OLPC
+	if (olpc_has_dcon()) {
+		modedb_ptr = (struct fb_videomode *) olpc_dcon_modedb;
+		modedb_size = ARRAY_SIZE(olpc_dcon_modedb);
+	}
+#endif
+
 	ret = fb_find_mode(&info->var, info, mode_option,
 			   modedb_ptr, modedb_size, NULL, 16);
 
@@ -556,6 +540,10 @@ static struct pci_driver lxfb_driver = {
 	.id_table	= lxfb_id_table,
 	.probe		= lxfb_probe,
 	.remove		= lxfb_remove,
+#ifdef CONFIG_PM
+	.suspend        = lxfb_suspend,
+	.resume         = lxfb_resume
+#endif
 };
 
 #ifndef MODULE
diff --git a/drivers/video/geode/lxfb_ops.c b/drivers/video/geode/lxfb_ops.c
index 4fbc99b..47ed9de 100644
--- a/drivers/video/geode/lxfb_ops.c
+++ b/drivers/video/geode/lxfb_ops.c
@@ -13,9 +13,13 @@
 #include <linux/fb.h>
 #include <linux/uaccess.h>
 #include <linux/delay.h>
+#include <asm/olpc.h>
 
 #include "lxfb.h"
 
+#define _GEODELX_
+#include "geode_regs.h"
+
 /* TODO
  * Support panel scaling
  * Add acceleration
@@ -290,6 +294,19 @@ unsigned int lx_framebuffer_size(void)
 {
 	unsigned int val;
 
+#ifdef CONFIG_OLPC
+	 if (machine_is_olpc() && !olpc_has_vsa()) {
+		u32 hi,lo;
+		rdmsr(MSR_LX_GLIU0_P2D_RO0, lo, hi);
+
+		/* Top page number */
+		val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20);
+		val -= (lo & 0x000fffff); /* Subtract bottom page number */
+		val += 1;                 /* Adjust page count */
+		return (val << 12);
+	}
+#endif
+
 	/* The frame buffer size is reported by a VSM in VSA II */
 	/* Virtual Register Class    = 0x02                     */
 	/* VG_MEM_SIZE (1MB units)   = 0x00                     */
@@ -301,6 +318,34 @@ unsigned int lx_framebuffer_size(void)
 	return (val << 20);
 }
 
+void lx_set_gamma(struct fb_info *info, unsigned int *gamma, int len)
+{
+	int i;
+	struct lxfb_par *par = info->par;
+
+	writel(0, par->df_regs + DF_PAR);
+
+	/* Sequential writes to the data register will increment the
+	   address automatically  */
+
+	for(i = 0; i < len; i++)
+		writel(gamma[i] & 0xFFFFFF, par->df_regs + DF_PDR);
+
+	writel(readl(par->df_regs + DF_MISC) & ~DF_MISC_GAM_BYPASS,
+	       par->df_regs + DF_MISC);
+}
+
+void lx_get_gamma(struct fb_info *info, unsigned int *gamma, int len)
+{
+	int i;
+	struct lxfb_par *par = info->par;
+
+	writel(0, par->df_regs + DF_PAR);
+
+	for(i = 0; i < len;i++)
+		gamma[i] = readl(par->df_regs + DF_PDR);
+}
+
 void lx_set_mode(struct fb_info *info)
 {
 	struct lxfb_par *par = info->par;
@@ -313,6 +358,7 @@ void lx_set_mode(struct fb_info *info)
 	int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
 
 	/* Unlock the DC registers */
+	readl(par->dc_regs + DC_UNLOCK);
 	writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
 
 	lx_graphics_disable(info);
@@ -534,3 +580,285 @@ int lx_blank_display(struct fb_info *info, int blank_mode)
 
 	return 0;
 }
+
+static struct geoderegs saved_regs;
+
+static void lx_save_regs(struct fb_info *info, struct geoderegs *regs)
+{
+	struct lxfb_par *par = info->par;
+	int i;
+
+	/* Wait for the command buffer to empty */
+	while(!(readl(par->gp_regs + 0x44) & (1 << 4)));
+
+	rdmsrl(MSR_LX_DF_PADSEL, regs->msr.padsel);
+	rdmsrl(MSR_LX_GLCP_DOTPLL, regs->msr.dotpll);
+	rdmsrl(MSR_LX_DF_GLCONFIG, regs->msr.dfglcfg);
+	rdmsrl(MSR_LX_DC_SPARE, regs->msr.dcspare);
+
+	writel(0x4758, par->dc_regs + 0x00);
+
+	memcpy(regs->gp.b, par->gp_regs, GP_REG_SIZE);
+	memcpy(regs->dc.b, par->dc_regs, DC_REG_SIZE);
+	memcpy(regs->vp.b, par->df_regs, VP_REG_SIZE);
+	memcpy(regs->fp.b, par->df_regs + VP_FP_START, FP_REG_SIZE);
+
+	/* Save the palettes */
+	writel(0, par->dc_regs + 0x70);
+
+	for(i = 0; i < DC_PAL_SIZE; i++) 
+		regs->pal[i] = readl(par->dc_regs + 0x74);
+	
+	writel(0, par->df_regs + 0x38);
+
+	for(i = 0; i <= 0xFF; i++)
+		regs->gamma[i] = readl(par->df_regs + 0x40);
+}
+
+static void lx_restore_regs(struct fb_info *info, struct geoderegs *regs)
+{
+	struct lxfb_par *par = info->par;
+	u32 val, i;
+
+	/* == DOTPLL == */
+
+	lx_set_dotpll((u32) (regs->msr.dotpll >> 32));
+
+	/* MSRs */
+
+	wrmsrl(MSR_LX_DF_GLCONFIG, regs->msr.dfglcfg);
+
+	/* == GP == */
+
+	writel(regs->gp.r.dst_offset, par->gp_regs + 0x00);
+	writel(regs->gp.r.src_offset, par->gp_regs + 0x04);
+	writel(regs->gp.r.stride, par->gp_regs + 0x08);
+	writel(regs->gp.r.wid_height, par->gp_regs + 0x0C);
+	writel(regs->gp.r.src_color_fg, par->gp_regs + 0x10);
+	writel(regs->gp.r.src_color_bg, par->gp_regs + 0x14);
+	writel(regs->gp.r.pat_color_0, par->gp_regs + 0x18);
+	writel(regs->gp.r.pat_color_1, par->gp_regs + 0x1C);
+	writel(regs->gp.r.pat_color_2, par->gp_regs + 0x20);
+	writel(regs->gp.r.pat_color_3, par->gp_regs + 0x24);
+	writel(regs->gp.r.pat_color_4, par->gp_regs + 0x28);
+	writel(regs->gp.r.pat_color_5, par->gp_regs + 0x2C);
+	writel(regs->gp.r.pat_data_0, par->gp_regs + 0x30);
+	writel(regs->gp.r.pat_data_1, par->gp_regs + 0x34);
+
+	/* Writing to these registers would cause a blt to happen */
+	/* 0x38, 0x3c, 0x40 */
+
+	/* Status register (0x44) is read only */
+
+	writel(regs->gp.r.hst_src, par->gp_regs + 0x48);
+	writel(regs->gp.r.base_offset, par->gp_regs + 0x4c);
+	writel(regs->gp.r.cmd_top, par->gp_regs + 0x50);
+	writel(regs->gp.r.cmd_bot, par->gp_regs + 0x54);
+	writel(regs->gp.r.cmd_read, par->gp_regs + 0x58);
+	writel(regs->gp.r.cmd_write, par->gp_regs + 0x5C);
+	writel(regs->gp.r.ch3_offset, par->gp_regs + 0x60);
+	writel(regs->gp.r.ch3_mode_str, par->gp_regs + 0x64);
+	writel(regs->gp.r.ch3_width, par->gp_regs + 0x6C);
+	writel(regs->gp.r.ch3_hsrc, par->gp_regs + 0x70);
+
+	/* FIXME:  Restore the LUT data here */
+
+	writel(regs->gp.r.int_cntrl, par->gp_regs + 0x70);
+
+	/* == DC == */
+
+	/* Write the unlock value */
+	writel(0x4758, par->dc_regs + 0x00);
+
+	/* Write the palette data first */
+
+	writel(0, par->dc_regs + 0x70);
+
+	for(i = 0; i < DC_PAL_SIZE; i++)
+		writel(regs->pal[i], par->dc_regs + 0x74);
+
+	/* MSRs */
+	wrmsrl(MSR_LX_DC_SPARE, regs->msr.dcspare);
+
+	/* Write the gcfg register without the enables */
+	writel(regs->dc.r.gcfg & ~0x0F, par->dc_regs + 0x04);
+
+	/* Write the vcfg register without the enables */
+	writel(regs->dc.r.dcfg & ~0x19, par->dc_regs + 0x08);
+
+	/* Write the rest of the active registers */
+	writel(regs->dc.r.arb, par->dc_regs + 0x0C);
+	writel(regs->dc.r.fb_st_offset, par->dc_regs + 0x10);
+	writel(regs->dc.r.cb_st_offset, par->dc_regs + 0x14);
+	writel(regs->dc.r.curs_st_offset, par->dc_regs + 0x18);
+	writel(regs->dc.r.icon_st_offset, par->dc_regs + 0x1C);
+	writel(regs->dc.r.vid_y_st_offset, par->dc_regs + 0x20);
+	writel(regs->dc.r.vid_u_st_offset, par->dc_regs + 0x24);
+	writel(regs->dc.r.vid_v_st_offset, par->dc_regs + 0x28);
+	writel(regs->dc.r.dctop, par->dc_regs + 0x2c);
+	writel(regs->dc.r.line_size, par->dc_regs + 0x30);
+	writel(regs->dc.r.gfx_pitch, par->dc_regs + 0x34);
+	writel(regs->dc.r.vid_yuv_pitch, par->dc_regs + 0x38);
+	writel(regs->dc.r.h_active_timing, par->dc_regs + 0x40);
+	writel(regs->dc.r.h_blank_timing, par->dc_regs + 0x44);
+	writel(regs->dc.r.h_sync_timing, par->dc_regs + 0x48);
+	writel(regs->dc.r.v_active_timing, par->dc_regs + 0x50);
+	writel(regs->dc.r.v_blank_timing, par->dc_regs + 0x54);
+	writel(regs->dc.r.v_sync_timing, par->dc_regs + 0x58);
+	writel(regs->dc.r.fbactive, par->dc_regs + 0x5c);
+	writel(regs->dc.r.dc_cursor_x, par->dc_regs + 0x60);
+	writel(regs->dc.r.dc_cursor_y, par->dc_regs + 0x64);
+	writel(regs->dc.r.dc_icon_x, par->dc_regs + 0x68);
+
+	/* Skip register 0x6C (line_cnt), 0x70/0x74 (palette),
+	   0x78 (diagnostic), and 0x7c (diagnostic)
+	*/
+
+	writel(regs->dc.r.dc_vid_ds_delta, par->dc_regs + 0x80);
+	writel(regs->dc.r.gliu0_mem_offset, par->dc_regs + 0x84);
+	writel(regs->dc.r.dv_ctl, par->dc_regs + 0x88);
+	writel(regs->dc.r.dv_acc, par->dc_regs + 0x8C);
+
+	writel(regs->dc.r.gfx_scale, par->dc_regs + 0x90);
+	writel(regs->dc.r.irq_filt_ctl, par->dc_regs + 0x94);
+	writel(regs->dc.r.filt_coeff1, par->dc_regs + 0x98);
+	writel(regs->dc.r.filt_coeff2, par->dc_regs + 0x9C);
+	writel(regs->dc.r.vbi_event_ctl, par->dc_regs + 0xA0);
+
+	writel(regs->dc.r.vbi_odd_ctl, par->dc_regs + 0xA4);
+	writel(regs->dc.r.vbi_hor, par->dc_regs + 0xA8);
+	writel(regs->dc.r.vbi_ln_odd, par->dc_regs + 0xAC);
+	writel(regs->dc.r.vbi_ln_event, par->dc_regs + 0xB0);
+	writel(regs->dc.r.vbi_pitch, par->dc_regs + 0xB4);
+	writel(regs->dc.r.clr_key, par->dc_regs + 0xB8);
+	writel(regs->dc.r.clr_key_mask, par->dc_regs + 0xBC);
+
+	writel(regs->dc.r.clr_key_x, par->dc_regs + 0xC0);
+	writel(regs->dc.r.clr_key_y, par->dc_regs + 0xC4);
+	writel(regs->dc.r.irq, par->dc_regs + 0xC8);
+	writel(regs->dc.r.genlk_ctrl, par->dc_regs + 0xD4);
+
+	writel(regs->dc.r.vid_even_y_st_offset, par->dc_regs + 0xD8);
+	writel(regs->dc.r.vid_even_u_st_offset, par->dc_regs + 0xDC);
+	writel(regs->dc.r.vid_even_v_st_offset, par->dc_regs + 0xE0);
+
+	writel(regs->dc.r.v_active_even_timing, par->dc_regs + 0xE4);
+	writel(regs->dc.r.v_blank_even_timing, par->dc_regs + 0xE8);
+	writel(regs->dc.r.v_sync_even_timing, par->dc_regs + 0xEC);
+
+	/* == VP == */
+
+	/* MSR */
+	wrmsrl(MSR_LX_DF_PADSEL, regs->msr.padsel);
+
+	/* Write gamma information first */
+
+	writel(0, par->df_regs + 0x38);
+
+	for(i = 0; i <= 0xFF; i++)
+		writel((u32) regs->gamma[i], par->df_regs + 0x40);
+
+	/* Don't enable video yet */
+	writel((u32) regs->vp.r.vcfg & ~0x01, par->df_regs + 0x00);
+
+	/* Don't enable the CRT yet */
+	writel((u32) regs->vp.r.dcfg & ~0x0F, par->df_regs + 0x08);
+
+	/* Write the rest of the VP registers */
+
+	writel((u32) regs->vp.r.vx, par->df_regs + 0x10);
+	writel((u32) regs->vp.r.vy, par->df_regs + 0x18);
+	writel((u32) regs->vp.r.vs, par->df_regs + 0x20);
+	writel((u32) regs->vp.r.vck, par->df_regs + 0x28);
+	writel((u32) regs->vp.r.vcm, par->df_regs + 0x30);
+	writel((u32) regs->vp.r.misc, par->df_regs + 0x50);
+	writel((u32) regs->vp.r.ccs, par->df_regs + 0x58);
+	writel((u32) regs->vp.r.vdc, par->df_regs + 0x78);
+	writel((u32) regs->vp.r.vco, par->df_regs + 0x80);
+	writel((u32) regs->vp.r.crc, par->df_regs + 0x88);
+	writel((u32) regs->vp.r.vde, par->df_regs + 0x98);
+	writel((u32) regs->vp.r.cck, par->df_regs + 0xA0);
+	writel((u32) regs->vp.r.ccm, par->df_regs + 0xA8);
+	writel((u32) regs->vp.r.cc1, par->df_regs + 0xB0);
+	writel((u32) regs->vp.r.cc2, par->df_regs + 0xB8);
+	writel((u32) regs->vp.r.a1x, par->df_regs + 0xC0);
+	writel((u32) regs->vp.r.a1y, par->df_regs + 0xC8);
+	writel((u32) regs->vp.r.a1c, par->df_regs + 0xD0);
+	writel((u32) regs->vp.r.a1t, par->df_regs + 0xD8);
+	writel((u32) regs->vp.r.a2x, par->df_regs + 0xE0);
+	writel((u32) regs->vp.r.a2y, par->df_regs + 0xE8);
+	writel((u32) regs->vp.r.a2c, par->df_regs + 0xF0);
+	writel((u32) regs->vp.r.a2t, par->df_regs + 0xF8);
+	writel((u32) regs->vp.r.a3x, par->df_regs + 0x100);
+	writel((u32) regs->vp.r.a3y, par->df_regs + 0x108);
+	writel((u32) regs->vp.r.a3c, par->df_regs + 0x110);
+	writel((u32) regs->vp.r.a3t, par->df_regs + 0x118);
+	writel((u32) regs->vp.r.vrr, par->df_regs + 0x120);
+
+	writel((u32) regs->vp.r.vye, par->df_regs + 0x138);
+	writel((u32) regs->vp.r.a1ye, par->df_regs + 0x140);
+	writel((u32) regs->vp.r.a2ye, par->df_regs + 0x148);
+	writel((u32) regs->vp.r.a3ye, par->df_regs + 0x150);
+
+	/* == FP == */
+
+	writel((u32) regs->fp.r.pt1, par->df_regs + 0x400);
+	writel((u32) regs->fp.r.pt2, par->df_regs + 0x408);
+	writel((u32) regs->fp.r.dfc, par->df_regs + 0x418);
+	writel(regs->fp.r.dca, par->df_regs + 0x448);
+	writel(regs->fp.r.dmd, par->df_regs + 0x450);
+	writel(regs->fp.r.crc, par->df_regs + 0x458);
+
+	/* Final enables */
+
+	val = readl(par->df_regs + 0x410);
+
+	/* Control the panel */
+	if (regs->fp.r.pm & (1 << 24)) {
+
+		if (!(val & 0x09))
+			writel(regs->fp.r.pm, par->df_regs + 0x410);
+	}
+	else {
+		if (!(val & 0x05))
+			writel(regs->fp.r.pm, par->df_regs + 0x410);
+	}
+
+	/* Turn everything on */
+
+	writel(regs->dc.r.gcfg, par->dc_regs + 0x04);
+	writel((u32) regs->vp.r.vcfg, par->df_regs + 0x00);
+	writel((u32) regs->vp.r.dcfg, par->df_regs + 0x08);
+	writel(regs->dc.r.dcfg, par->dc_regs + 0x08);
+}
+
+static int lx_power_on = 1;
+
+int lx_shutdown(struct fb_info *info)
+{
+	struct lxfb_par *par = info->par;
+
+	if (lx_power_on == 0)
+		return 0;
+
+	writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
+	lx_save_regs(info, &saved_regs);
+	lx_graphics_disable(info);
+
+	lx_power_on = 0;
+	return 0;
+}
+
+int lx_powerup(struct fb_info *info)
+{
+	struct lxfb_par *par = info->par;
+
+	if (lx_power_on == 1)
+		return 0;
+
+	lx_restore_regs(info, &saved_regs);
+	writel(0, par->dc_regs + DC_UNLOCK);
+
+	lx_power_on = 1;
+	return 0;
+}
diff --git a/drivers/video/geode/suspend_gx.c b/drivers/video/geode/suspend_gx.c
new file mode 100644
index 0000000..43c25be
--- /dev/null
+++ b/drivers/video/geode/suspend_gx.c
@@ -0,0 +1,272 @@
+#include <linux/fb.h>
+#include <asm/io.h>
+#include <asm/msr.h>
+
+#include "geodefb.h"
+#include "video_gx.h"
+
+void gx_set_dotpll(struct fb_info *info, struct geoderegs *regs)
+{
+	int timeout = 1000;
+
+	u64 rstpll, dotpll;
+	
+	rdmsrl(MSR_GLCP_SYS_RSTPLL, rstpll);
+	rdmsrl(MSR_GLCP_DOTPLL, dotpll);
+
+	dotpll &= 0x00000000ffffffffull;
+	dotpll |= regs->msr.dotpll & 0xffffffff00000000ull;
+	
+	dotpll |= MSR_GLCP_DOTPLL_DOTRESET;
+	dotpll &= ~MSR_GLCP_DOTPLL_BYPASS;
+	
+	wrmsrl(MSR_GLCP_DOTPLL, dotpll);
+
+	rstpll |= (regs->msr.rstpll & 
+		   ( MSR_GLCP_SYS_RSTPLL_DOTPREDIV2  |
+		     MSR_GLCP_SYS_RSTPLL_DOTPREMULT2 |
+		     MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3));
+	
+	wrmsrl(MSR_GLCP_SYS_RSTPLL, rstpll);
+	dotpll &= ~(MSR_GLCP_DOTPLL_DOTRESET);
+	wrmsrl(MSR_GLCP_DOTPLL, dotpll);
+
+	do {
+		rdmsrl(MSR_GLCP_DOTPLL, dotpll);
+	} while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK));
+}
+
+/* FIXME: Make sure nothing is read to clear */
+
+void gx_save_regs(struct fb_info *info, struct geoderegs *regs)
+{
+	struct geodefb_par *par = info->par;
+	int i;
+
+	/* Wait for the BLT engine to stop being busy */
+	while(readl(par->gp_regs + 0x44) & 0x05);
+
+	rdmsrl(GX_VP_MSR_PAD_SELECT, regs->msr.padsel);
+	rdmsrl(MSR_GLCP_DOTPLL, regs->msr.dotpll);
+	rdmsrl(MSR_GLCP_SYS_RSTPLL, regs->msr.rstpll);
+
+	writel(0x4758, par->dc_regs + 0x00);
+
+	memcpy(regs->gp.b, par->gp_regs, GP_REG_SIZE);
+	memcpy(regs->dc.b, par->dc_regs, DC_REG_SIZE);
+	memcpy(regs->vp.b, par->vid_regs, VP_REG_SIZE);
+	memcpy(regs->fp.b, par->vid_regs + 0x400, FP_REG_SIZE);
+
+	/* Save the palettes */
+	writel(0, par->dc_regs + 0x70);
+
+	for(i = 0; i < DC_PAL_SIZE; i++) 
+		regs->pal[i] = readl(par->dc_regs + 0x74);
+	
+	writel(0, par->vid_regs + 0x38);
+
+	for(i = 0; i < 0xFF; i++)
+		regs->gamma[i] = readl(par->vid_regs + 0x40);       	
+}
+
+void gx_restore_regs(struct fb_info *info, struct geoderegs *regs)
+{
+	struct geodefb_par *par = info->par;
+	u32 val, i;
+
+	/* DOTPLL */
+	gx_set_dotpll(info, regs);
+
+	/* GP */
+
+	writel(regs->gp.r.dst_offset, par->gp_regs + 0x00);
+	writel(regs->gp.r.src_offset, par->gp_regs + 0x04);
+	writel(regs->gp.r.stride, par->gp_regs + 0x08);
+	writel(regs->gp.r.wid_height, par->gp_regs + 0x0C);
+	writel(regs->gp.r.src_color_fg, par->gp_regs + 0x10);
+	writel(regs->gp.r.src_color_bg, par->gp_regs + 0x14);
+	writel(regs->gp.r.pat_color_0, par->gp_regs + 0x18);
+	writel(regs->gp.r.pat_color_1, par->gp_regs + 0x1C);
+	writel(regs->gp.r.pat_color_2, par->gp_regs + 0x20);
+	writel(regs->gp.r.pat_color_3, par->gp_regs + 0x24);
+	writel(regs->gp.r.pat_color_4, par->gp_regs + 0x28);
+	writel(regs->gp.r.pat_color_5, par->gp_regs + 0x2C);
+	writel(regs->gp.r.pat_data_0, par->gp_regs + 0x30);
+	writel(regs->gp.r.pat_data_1, par->gp_regs + 0x34);
+
+	/* Don't write the raster / vector / blt mode regs */
+	/* status register is read only */
+
+	writel(regs->gp.r.hst_src, par->gp_regs + 0x48);
+	writel(regs->gp.r.base_offset, par->gp_regs + 0x4c);
+	
+	/* DC */
+	
+	/* Write the unlock value */
+	writel(0x4758, par->dc_regs + 0x00);
+
+	writel(0, par->dc_regs + 0x70);
+	
+	for(i = 0; i < DC_PAL_SIZE; i++)
+		writel(regs->pal[i], par->dc_regs + 0x74);
+
+	/* Write the gcfg register without the enables */
+	writel(regs->dc.r.gcfg & ~0x0F, par->dc_regs + 0x04);
+	
+	/* Write the vcfg register without the enables */
+	writel(regs->dc.r.dcfg & ~0x19, par->dc_regs + 0x08);
+	
+	/* Write the rest of the active registers */
+
+	writel(regs->dc.r.fb_st_offset, par->dc_regs + 0x10);
+	writel(regs->dc.r.cb_st_offset, par->dc_regs + 0x14);
+	writel(regs->dc.r.curs_st_offset, par->dc_regs + 0x18);
+	writel(regs->dc.r.icon_st_offset, par->dc_regs + 0x1C);
+	writel(regs->dc.r.vid_y_st_offset, par->dc_regs + 0x20);
+	writel(regs->dc.r.vid_u_st_offset, par->dc_regs + 0x24);
+	writel(regs->dc.r.vid_v_st_offset, par->dc_regs + 0x28);
+	writel(regs->dc.r.line_size, par->dc_regs + 0x30);
+	writel(regs->dc.r.gfx_pitch, par->dc_regs + 0x34);
+	writel(regs->dc.r.vid_yuv_pitch, par->dc_regs + 0x38);
+	writel(regs->dc.r.h_active_timing, par->dc_regs + 0x40);
+	writel(regs->dc.r.h_blank_timing, par->dc_regs + 0x44);
+	writel(regs->dc.r.h_sync_timing, par->dc_regs + 0x48);
+	writel(regs->dc.r.v_active_timing, par->dc_regs + 0x50);
+	writel(regs->dc.r.v_blank_timing, par->dc_regs + 0x54);
+	writel(regs->dc.r.v_sync_timing, par->dc_regs + 0x58);
+	writel(regs->dc.r.dc_cursor_x, par->dc_regs + 0x60);
+	writel(regs->dc.r.dc_cursor_y, par->dc_regs + 0x64);
+	writel(regs->dc.r.dc_icon_x, par->dc_regs + 0x68);
+	
+	/* Don't write the line_cnt or diag registers */
+
+	writel(regs->dc.r.dc_vid_ds_delta, par->dc_regs + 0x80);
+	writel(regs->dc.r.gliu0_mem_offset, par->dc_regs + 0x84);
+	writel(regs->dc.r.dv_acc, par->dc_regs + 0x8C);
+	
+	/* VP */
+
+	/* MSR */
+	wrmsrl(GX_VP_MSR_PAD_SELECT, regs->msr.padsel);
+
+	writel(0, par->vid_regs + 0x38);
+	
+	for(i = 0; i < 0xFF; i++)
+		writel((u32) regs->gamma[i], par->vid_regs + 0x40);   
+
+	/* Don't enable video yet */
+	writel((u32) regs->vp.r.vcfg & ~0x01, par->vid_regs + 0x00);
+
+	/* Don't enable the CRT yet */
+	writel((u32) regs->vp.r.dcfg & ~0x0F, par->vid_regs + 0x08);
+
+	/* Write the rest of the VP registers */
+
+	writel((u32) regs->vp.r.vx, par->vid_regs + 0x10);
+	writel((u32) regs->vp.r.vy, par->vid_regs + 0x18);
+	writel((u32) regs->vp.r.vs, par->vid_regs + 0x20);
+	writel((u32) regs->vp.r.vck, par->vid_regs + 0x28);
+	writel((u32) regs->vp.r.vcm, par->vid_regs + 0x30);
+	writel((u32) regs->vp.r.misc, par->vid_regs + 0x50);
+	writel((u32) regs->vp.r.ccs, par->vid_regs + 0x58);
+	writel((u32) regs->vp.r.vdc, par->vid_regs + 0x78);
+	writel((u32) regs->vp.r.vco, par->vid_regs + 0x80);
+	writel((u32) regs->vp.r.crc, par->vid_regs + 0x88);
+	writel((u32) regs->vp.r.vde, par->vid_regs + 0x98);
+	writel((u32) regs->vp.r.cck, par->vid_regs + 0xA0);
+	writel((u32) regs->vp.r.ccm, par->vid_regs + 0xA8);
+	writel((u32) regs->vp.r.cc1, par->vid_regs + 0xB0);
+	writel((u32) regs->vp.r.cc2, par->vid_regs + 0xB8);
+	writel((u32) regs->vp.r.a1x, par->vid_regs + 0xC0);
+	writel((u32) regs->vp.r.a1y, par->vid_regs + 0xC8);
+	writel((u32) regs->vp.r.a1c, par->vid_regs + 0xD0);
+	writel((u32) regs->vp.r.a1t, par->vid_regs + 0xD8);
+	writel((u32) regs->vp.r.a2x, par->vid_regs + 0xE0);
+	writel((u32) regs->vp.r.a2y, par->vid_regs + 0xE8);
+	writel((u32) regs->vp.r.a2c, par->vid_regs + 0xF0);
+	writel((u32) regs->vp.r.a2t, par->vid_regs + 0xF8);
+	writel((u32) regs->vp.r.a3x, par->vid_regs + 0x100);
+	writel((u32) regs->vp.r.a3y, par->vid_regs + 0x108);
+	writel((u32) regs->vp.r.a3c, par->vid_regs + 0x110);
+	writel((u32) regs->vp.r.a3t, par->vid_regs + 0x118);
+	writel((u32) regs->vp.r.vrr, par->vid_regs + 0x120);
+	
+	
+	/* FP registers */
+	
+	writel((u32) regs->fp.r.pt1, par->vid_regs + 0x400);
+	writel((u32) regs->fp.r.pt2, par->vid_regs + 0x408);
+
+	writel((u32) regs->fp.r.dfc, par->vid_regs + 0x418);
+	writel(regs->fp.r.blfsr, par->vid_regs + 0x420);
+	writel(regs->fp.r.rlfsr, par->vid_regs + 0x428);
+	writel(regs->fp.r.fmi, par->vid_regs + 0x430);
+	writel(regs->fp.r.fmd, par->vid_regs + 0x438);
+	writel(regs->fp.r.dca, par->vid_regs + 0x448);
+	writel(regs->fp.r.dmd, par->vid_regs + 0x450);
+	writel(regs->fp.r.crc, par->vid_regs + 0x458);
+	writel(regs->fp.r.fbb, par->vid_regs + 0x460);
+	
+	/* Final enables */
+
+	val = readl(par->vid_regs + 0x410);
+
+	/* Control the panel */
+	if (regs->fp.r.pm & (1 << 24)) {
+
+		if (!(val & 0x09))
+			writel(regs->fp.r.pm, par->vid_regs + 0x410);
+	}
+	else {
+		if (!(val & 0x05))
+			writel(regs->fp.r.pm, par->vid_regs + 0x410);
+	}
+       	
+	/* Turn everything on */
+
+	writel(regs->dc.r.gcfg, par->dc_regs + 0x04);
+	writel((u32) regs->vp.r.vcfg, par->vid_regs + 0x00);
+	writel((u32) regs->vp.r.dcfg, par->vid_regs + 0x08);
+	writel(regs->dc.r.dcfg, par->dc_regs + 0x08);
+}
+
+
+#ifdef DEBUG
+
+void dump_regs(struct fb_info *info, int mode) {
+
+	struct geodefb_par *par = info->par;
+	u32 val;
+	int i;
+
+	if (mode == 0) {
+		for(i = 0; i < GP_REG_SIZE; i += 4) {
+			val = readl(par->gp_regs + i);
+		}
+	}
+
+	if (mode == 1) {
+		writel(0x4758, par->dc_regs + 0x00);
+
+		for(i = 0; i < DC_REG_SIZE; i += 4) {
+			val = readl(par->dc_regs + i);
+			printk("DC%x: %x\n", i, val);
+		}
+	}
+
+	if (mode == 2) {
+		for(i = 0; i < VP_REG_SIZE; i += 8) {
+			val = readl(par->vid_regs + i);
+			printk("VP%x: %x\n", i, val);
+		}
+	}
+
+	if (mode == 3) {
+		for(i = 0; i < FP_REG_SIZE; i += 8) {
+			val = readl(par->vid_regs + 0x400 + i);
+			printk("FP%x: %x\n", i, val);
+		}
+	}
+}
+
+#endif
diff --git a/drivers/video/geode/video_gx.c b/drivers/video/geode/video_gx.c
index 7f3f18d..e282e74 100644
--- a/drivers/video/geode/video_gx.c
+++ b/drivers/video/geode/video_gx.c
@@ -16,10 +16,14 @@
 #include <asm/io.h>
 #include <asm/delay.h>
 #include <asm/msr.h>
+#include <asm/olpc.h>
 
 #include "geodefb.h"
 #include "video_gx.h"
+#include "display_gx.h"
 
+/* This structure is used to store the saved registers during suspend */
+static struct geoderegs gx_saved_regs;
 
 /*
  * Tables of register settings for various DOTCLKs.
@@ -58,7 +62,7 @@ static const struct gx_pll_entry gx_pll_table_48MHz[] = {
 	{ 13888, POSTDIV3,	    0x000007E1 },	/*  72.0000 */
 	{ 13426, PREMULT2,	    0x00000F4A },	/*  74.4810 */
 	{ 13333, 0,		    0x00000052 },	/*  75.0000 */
-	{ 12698, 0,		    0x00000056 },	/*  78.7500 */
+	{ 12698, 0,		    0x00000056 },       /*  78.7500 */
 	{ 12500, POSTDIV3|PREMULT2, 0x00000709 },	/*  80.0000 */
 	{ 11135, PREMULT2,	    0x00000262 },	/*  89.8000 */
 	{ 10582, 0,		    0x000002D2 },	/*  94.5000 */
@@ -117,8 +121,9 @@ static const struct gx_pll_entry gx_pll_table_14MHz[] = {
 	{  4357, 0, 0x0000057D },	/* 229.5000 */
 };
 
-static void gx_set_dclk_frequency(struct fb_info *info)
+void gx_set_dclk_frequency(struct fb_info *info)
 {
+	struct geodefb_par *par = info->par;
 	const struct gx_pll_entry *pll_table;
 	int pll_table_len;
 	int i, best_i;
@@ -173,115 +178,169 @@ static void gx_set_dclk_frequency(struct fb_info *info)
 	do {
 		rdmsrl(MSR_GLCP_DOTPLL, dotpll);
 	} while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK));
+
+	par->curdclk = pll_table[best_i].dotpll_value;
 }
 
-static void
-gx_configure_tft(struct fb_info *info)
+/* Find out the current clock - we will use this information to avoid
+   re-programming it if we don't need to */
+
+unsigned int gx_get_dclk(struct fb_info *info)
 {
-	struct geodefb_par *par = info->par;
-	unsigned long val;
-	unsigned long fp;
+	const struct gx_pll_entry *pll_table;
+	int pll_table_len;
+	u64 dotpll;
+	int i;
 
-	/* Set up the DF pad select MSR */
+	if (cpu_data->x86_mask == 1) {
+		pll_table = gx_pll_table_14MHz;
+		pll_table_len = ARRAY_SIZE(gx_pll_table_14MHz);
+	} else {
+		pll_table = gx_pll_table_48MHz;
+		pll_table_len = ARRAY_SIZE(gx_pll_table_48MHz);
+	}
 
-	rdmsrl(GX_VP_MSR_PAD_SELECT, val);
-	val &= ~GX_VP_PAD_SELECT_MASK;
-	val |= GX_VP_PAD_SELECT_TFT;
-	wrmsrl(GX_VP_MSR_PAD_SELECT, val);
+	rdmsrl(MSR_GLCP_DOTPLL, dotpll);
 
-	/* Turn off the panel */
+	for(i = 0; i < pll_table_len; i++) {
+		if (pll_table[i].dotpll_value == (u32) (dotpll >> 32))
+			break;
+	}
 
-	fp = readl(par->vid_regs + GX_FP_PM);
-	fp &= ~GX_FP_PM_P;
-	writel(fp, par->vid_regs + GX_FP_PM);
+	return (i == pll_table_len) ? 0 : pll_table[i].pixclock;
+}
+
+
+#define CMP(val, mask, res) (((val) & (mask)) == (res))
 
-	/* Set timing 1 */
+static void
+gx_configure_tft(struct fb_info *info) {
 
-	fp = readl(par->vid_regs + GX_FP_PT1);
-	fp &= GX_FP_PT1_VSIZE_MASK;
-	fp |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT;
-	writel(fp, par->vid_regs + GX_FP_PT1);
+	struct geodefb_par *par = info->par;
+	u32 val, fp = 0, fp1, fp2, sync = 0;
 
-	/* Timing 2 */
-	/* Set bits that are always on for TFT */
+	/* Set up the DF pad select MSR */
 
-	fp = 0x0F100000;
+	rdmsrl(GX_VP_MSR_PAD_SELECT, val);
 
-	/* Add sync polarity */
+	if ((val & GX_VP_PAD_SELECT_MASK) != GX_VP_PAD_SELECT_TFT) {
+		val &= ~GX_VP_PAD_SELECT_MASK;
+		val |= GX_VP_PAD_SELECT_TFT;
+		wrmsrl(GX_VP_MSR_PAD_SELECT, val);
+	}
 
 	if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
-		fp |= GX_FP_PT2_VSP;
+		sync |= GX_FP_PT2_VSP;
 
 	if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
-		fp |= GX_FP_PT2_HSP;
+		sync |= GX_FP_PT2_HSP;
 
-	writel(fp, par->vid_regs + GX_FP_PT2);
+	/* We only need to turn off the panel if something changed */
 
-	/*  Set the dither control */
-	writel(0x70, par->vid_regs + GX_FP_DFC);
+	fp1 = readl(par->vid_regs + GX_FP_PT1);
+	fp2 = readl(par->vid_regs + GX_FP_PT2);
+
+	if (!CMP(fp1, GX_FP_PT1_VSIZE_MASK, info->var.yres << GX_FP_PT1_VSIZE_SHIFT) ||
+	    (fp2 != (0x0F100000 | sync))) {
 
-	/* Enable the FP data and power (in case the BIOS didn't) */
+		/* Turn off the panel */
 
-	fp = readl(par->vid_regs + GX_DCFG);
-	fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN;
-	writel(fp, par->vid_regs + GX_DCFG);
+#ifdef NOTUSED
+		/* Do we really need to turn off the panel? */
+		/* Possibly - we have a glitch somewhere */
 
-	/* Unblank the panel */
+		fp = readl(par->vid_regs + GX_FP_PM);
+		fp &= ~GX_FP_PM_P;
+		writel(fp, par->vid_regs + GX_FP_PM);
+#endif
+
+		/* Timing 1 */
+		fp1 &= GX_FP_PT1_VSIZE_MASK;
+		fp1 |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT;
+		writel(fp, par->vid_regs + GX_FP_PT1);
+
+		/* Timing 2 */
+		writel(0x0F100000 | sync, par->vid_regs + GX_FP_PT2);
+	}
+
+	/*  Set the dither control */
+	if (readl(par->vid_regs + GX_FP_DFC) != 0x70) {
+		writel(0x70, par->vid_regs + GX_FP_DFC);
+	}
+
+	/* Turn on the panel */
 
 	fp = readl(par->vid_regs + GX_FP_PM);
-	fp |= GX_FP_PM_P;
-	writel(fp, par->vid_regs + GX_FP_PM);
+
+	if (!(fp & 0x09))
+		writel(fp | GX_FP_PM_P, par->vid_regs + GX_FP_PM);
 }
 
+#define DCFG_DEFAULT_VAL GX_DCFG_CRT_SYNC_SKW_DFLT | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN | \
+GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN
+
 static void gx_configure_display(struct fb_info *info)
 {
 	struct geodefb_par *par = info->par;
-	u32 dcfg, misc;
+	u32 dcfg, misc, sync = 0;
 
 	/* Set up the MISC register */
-
 	misc = readl(par->vid_regs + GX_MISC);
 
-	/* Power up the DAC */
-	misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
+	/* We leave gamma enabled if it was already enabled.
+	   Although the hardware enables it without setting
+	   up the gamma table, the BIOS or bootloader ought
+	   to have either disabled it or loaded a table by now */
 
-	/* Disable gamma correction */
-	misc |= GX_MISC_GAM_EN;
 
-	writel(misc, par->vid_regs + GX_MISC);
 
-	/* Write the display configuration */
-	dcfg = readl(par->vid_regs + GX_DCFG);
+	if (par->enable_crt) {
+		/* Power up the CRT DACs */
+		if (misc & ( GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN)) {
+			misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
+			writel(misc, par->vid_regs + GX_MISC);
+		}
 
-	/* Disable hsync and vsync */
-	dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
-	writel(dcfg, par->vid_regs + GX_DCFG);
+		if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
+			sync |= GX_DCFG_CRT_HSYNC_POL;
 
-	/* Clear bits from existing mode. */
-	dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK
-		  | GX_DCFG_CRT_HSYNC_POL   | GX_DCFG_CRT_VSYNC_POL
-		  | GX_DCFG_VSYNC_EN        | GX_DCFG_HSYNC_EN);
+		if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
+			sync |= GX_DCFG_CRT_VSYNC_POL;
+	}
+	else {
+		/* Turn off the CRT DACs in FP mode - we don't need them */
+		if ((misc & (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN))) {
+			misc |= (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
+			writel(misc, par->vid_regs + GX_MISC);
+		}
+	}
 
-	/* Set default sync skew.  */
-	dcfg |= GX_DCFG_CRT_SYNC_SKW_DFLT;
+	/* Write the display configuration */
+	dcfg = readl(par->vid_regs + GX_DCFG);
 
-	/* Enable hsync and vsync. */
-	dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN;
+	if (!CMP(dcfg, DCFG_DEFAULT_VAL | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL,
+		 DCFG_DEFAULT_VAL | sync)) {
 
-	/* Sync polarities. */
-	if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
-		dcfg |= GX_DCFG_CRT_HSYNC_POL;
-	if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
-		dcfg |= GX_DCFG_CRT_VSYNC_POL;
+		/* Disable hsync and vsync */
+		dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
+		writel(dcfg, par->vid_regs + GX_DCFG);
 
-	/* Enable the display logic */
-	/* Set up the DACS to blank normally */
+		/* Clear bits from existing mode. */
+		dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK
+			  | GX_DCFG_CRT_HSYNC_POL   | GX_DCFG_CRT_VSYNC_POL
+			  | GX_DCFG_VSYNC_EN        | GX_DCFG_HSYNC_EN);
 
-	dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN;
+		/* Set default sync skew.  */
+		dcfg |= GX_DCFG_CRT_SYNC_SKW_DFLT;
 
-	/* Enable the external DAC VREF? */
+		/* Enable hsync and vsync. */
+		dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN;
 
-	writel(dcfg, par->vid_regs + GX_DCFG);
+		/* Enable the display logic */
+		dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN;
+
+		writel(dcfg, par->vid_regs + GX_DCFG);
+	}
 
 	/* Set up the flat panel (if it is enabled) */
 
@@ -289,6 +348,100 @@ static void gx_configure_display(struct fb_info *info)
 		gx_configure_tft(info);
 }
 
+int gxfb_powerdown(struct fb_info *info) 
+{
+	struct geodefb_par *par = info->par;
+
+	/* We're already suspended */
+
+	if (par->state != FB_POWER_STATE_ON)
+		return 0;
+
+	/* Save the registers */
+	gx_save_regs(info, &gx_saved_regs);
+
+	/* Shut down the engine */
+
+	writel(gx_saved_regs.vp.r.vcfg & ~0x01, par->vid_regs + GX_VCFG);
+	writel(gx_saved_regs.vp.r.dcfg & ~0x0F, par->vid_regs + GX_DCFG);
+
+	/* Turn off the flat panel unless we are attached to a DCON */
+	if (!olpc_has_dcon())
+		writel(gx_saved_regs.fp.r.pm & ~GX_FP_PM_P, par->vid_regs + GX_FP_PM);
+
+	writel(0x4758, par->dc_regs + DC_UNLOCK);
+
+	writel(gx_saved_regs.dc.r.gcfg & ~0x0F,
+	       par->dc_regs + DC_GENERAL_CFG);
+
+	writel(gx_saved_regs.dc.r.dcfg & ~0x19,
+	       par->dc_regs + DC_DISPLAY_CFG);
+	
+	par->state = FB_POWER_STATE_SUSPEND;
+
+	return 0;
+}
+
+int gxfb_powerup(struct fb_info *info)
+{
+	struct geodefb_par *par = info->par;
+	u32 val;
+
+	if (par->state == FB_POWER_STATE_SUSPEND) {
+
+		writel(gx_saved_regs.dc.r.dcfg,
+		       par->dc_regs + DC_DISPLAY_CFG);
+
+		writel(gx_saved_regs.vp.r.vcfg, par->vid_regs + GX_VCFG);
+		writel(gx_saved_regs.vp.r.dcfg, par->vid_regs + GX_DCFG);
+
+		val = readl(par->vid_regs + GX_FP_PM);
+
+		/* power up the panel if it needs it; we don't always power it down */
+		if (!(val & 0x09)) {
+			writel(gx_saved_regs.fp.r.pm, par->vid_regs + GX_FP_PM);
+			mdelay(64);
+		}
+	}
+
+	/* If the panel is currently on its way up, then wait up to 100ms
+	   for it */
+	
+	if (readl(par->vid_regs + GX_FP_PM) & 0x08) {
+		int i;
+		
+		for(i = 0; i < 10; i++) {
+			if (readl(par->vid_regs + GX_FP_PM) & 0x01)
+				break;
+
+			mdelay(10);
+		}
+
+		if (i == 10) 
+			printk(KERN_ERR "gxfb:  Panel power up timed out\n");
+	}
+
+	if (par->state == FB_POWER_STATE_ON)
+		return 0;
+	
+	switch(par->state) {
+	case FB_POWER_STATE_OFF:
+		gx_restore_regs(info, &gx_saved_regs);
+		break;
+
+	case FB_POWER_STATE_SUSPEND:
+		/* Do this because it will turn on the FIFO which will
+	   	   start the line count */
+		writel(gx_saved_regs.dc.r.gcfg,
+		       par->dc_regs + DC_GENERAL_CFG);
+		writel(0x0, par->dc_regs + DC_UNLOCK);
+		break;
+	}
+
+	par->state = FB_POWER_STATE_ON;
+	return 0;
+}
+
 static int gx_blank_display(struct fb_info *info, int blank_mode)
 {
 	struct geodefb_par *par = info->par;
@@ -315,6 +468,7 @@ static int gx_blank_display(struct fb_info *info, int blank_mode)
 	default:
 		return -EINVAL;
 	}
+
 	dcfg = readl(par->vid_regs + GX_DCFG);
 	dcfg &= ~(GX_DCFG_DAC_BL_EN
 		  | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN);
@@ -326,7 +480,7 @@ static int gx_blank_display(struct fb_info *info, int blank_mode)
 		dcfg |= GX_DCFG_VSYNC_EN;
 	writel(dcfg, par->vid_regs + GX_DCFG);
 
-	/* Power on/off flat panel. */
+	/* Power on/off flat panel */
 
 	if (par->enable_crt == 0) {
 		fp_pm = readl(par->vid_regs + GX_FP_PM);
@@ -340,8 +494,37 @@ static int gx_blank_display(struct fb_info *info, int blank_mode)
 	return 0;
 }
 
+extern struct fb_info *gxfb_info;
+
+/* This function controls the flatpanel power sequencing - this is used
+   by the OLPC power management engine to enable the FP sequencing much
+   earlier in the resume process
+*/
+
+void gxfb_flatpanel_control(int state)
+{
+	struct geodefb_par *par = gxfb_info->par;
+	u32 val, fp = readl(par->vid_regs + GX_FP_PM);
+	val  = fp;
+
+	/* Turn on the panel if it isn't aleady */
+
+	if (state) {
+		if (!(val & 0x01))
+			val |= GX_FP_PM_P;
+	}
+	else {
+		if (!(val & 0x02))
+			val &= ~GX_FP_PM_P;
+	}
+
+	if (val != fp)
+		writel(val, par->vid_regs + GX_FP_PM);
+}
+
 struct geode_vid_ops gx_vid_ops = {
 	.set_dclk	   = gx_set_dclk_frequency,
+	.get_dclk          = gx_get_dclk,
 	.configure_display = gx_configure_display,
 	.blank_display	   = gx_blank_display,
 };
diff --git a/drivers/video/geode/video_gx.h b/drivers/video/geode/video_gx.h
index ce28d8f..c57b36b 100644
--- a/drivers/video/geode/video_gx.h
+++ b/drivers/video/geode/video_gx.h
@@ -11,6 +11,8 @@
 #ifndef __VIDEO_GX_H__
 #define __VIDEO_GX_H__
 
+#include "geode_regs.h"
+
 extern struct geode_vid_ops gx_vid_ops;
 
 /* GX Flatpanel control MSR */
@@ -20,6 +22,8 @@ extern struct geode_vid_ops gx_vid_ops;
 
 /* Geode GX video processor registers */
 
+#define GX_VCFG         0x0000
+
 #define GX_DCFG		0x0008
 #  define GX_DCFG_CRT_EN		0x00000001
 #  define GX_DCFG_HSYNC_EN		0x00000002
@@ -42,6 +46,14 @@ extern struct geode_vid_ops gx_vid_ops;
 #define GX_MISC_DAC_PWRDN  0x00000400
 #define GX_MISC_A_PWRDN    0x00000800
 
+/* Gamma correction RAM - address and data registers */
+
+#define GX_GAR 0x038
+#define GX_GDR 0x040
+
+#define GXFB_GAMMA_DWORDS 256 /* number of dwords in the gamma ram */
+#define GXFB_GAMMA_SIZE (GXFB_GAMMA_DWORDS * sizeof(unsigned int))
+
 /* Geode GX flat panel display control registers */
 
 #define GX_FP_PT1 0x0400
@@ -69,4 +81,13 @@ extern struct geode_vid_ops gx_vid_ops;
 #  define MSR_GLCP_DOTPLL_BYPASS		(0x0000000000008000ull)
 #  define MSR_GLCP_DOTPLL_LOCK			(0x0000000002000000ull)
 
+int gxfb_powerdown(struct fb_info *info);
+int gxfb_powerup(struct fb_info *info);
+
+void gx_set_dclk_frequency(struct fb_info *info);
+unsigned int gx_get_dclk(struct fb_info *info);
+
+void gx_save_regs(struct fb_info *info, struct geoderegs *regs);
+void gx_restore_regs(struct fb_info *info, struct geoderegs *regs);
+
 #endif /* !__VIDEO_GX_H__ */
diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c
index 3741ad7..49f6db5 100644
--- a/drivers/video/modedb.c
+++ b/drivers/video/modedb.c
@@ -33,6 +33,8 @@ const char *global_mode_option;
      *  Standard video mode definitions (taken from XFree86)
      */
 
+#define DEFAULT_MODEDB_INDEX	0
+
 static const struct fb_videomode modedb[] = {
     {
 	/* 640x400 @ 70 Hz, 31.5 kHz hsync */
@@ -504,7 +506,8 @@ int fb_find_mode(struct fb_var_screeninfo *var,
     }
 
     if (!default_mode)
-	default_mode = &db[0];
+	    default_mode = (db == modedb) ?
+		    &modedb[DEFAULT_MODEDB_INDEX] : &db[0];
 
     if (!default_bpp)
 	default_bpp = 8;
diff --git a/drivers/video/olpc_dcon.c b/drivers/video/olpc_dcon.c
new file mode 100644
index 0000000..d4ef138
--- /dev/null
+++ b/drivers/video/olpc_dcon.c
@@ -0,0 +1,824 @@
+/*
+ * Mainly by David Woodhouse, somewhat modified by Jordan Crouse
+ *
+ * Copyright © 2006-2007  Red Hat, Inc.
+ * Copyright © 2006-2007  Advanced Micro Devices, Inc.
+ * 
+ * This program is free software.  You can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/fb.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/i2c-id.h>
+#include <linux/pci.h>
+#include <linux/vt_kern.h>
+#include <linux/pci_ids.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/backlight.h>
+#include <linux/device.h>
+#include <asm/uaccess.h>
+#include <linux/ctype.h>
+#include <linux/reboot.h>
+#include <asm/tsc.h>
+#include <asm/olpc.h>
+
+#include "olpc_dcon.h"
+
+/* Module definitions */
+
+static int resumeline = 898;
+module_param(resumeline, int, 0444);
+
+static int noinit;
+module_param(noinit, int, 0444);
+
+/* Default off since it doesn't work on DCON ASIC in B-test OLPC board */
+static int useaa = 1;
+module_param(useaa, int, 0444);
+
+/* I2C structures */
+
+static struct i2c_driver dcon_driver;
+static struct i2c_client *dcon_client;
+
+/* Platform devices */
+static struct platform_device *dcon_device;
+
+/* Backlight device */
+static struct backlight_device *dcon_bl_dev;
+
+/* Base address of the GPIO registers */
+static unsigned long gpio_base;
+
+static struct fb_info *fbinfo;
+
+/* Current source, initialized at probe time */
+static int dcon_source;
+
+/* Desired source */
+static int dcon_pending;
+
+/* Current output type */
+static int dcon_output = DCON_OUTPUT_COLOR;
+
+/* Current sleep status (not yet implemented) */
+static int dcon_sleep_val = DCON_ACTIVE;
+
+/* Shadow register for the DCON_REG_MODE register */
+static unsigned short dcon_disp_mode;
+
+/* Variables used during switches */
+static int dcon_switched;
+
+static DECLARE_WAIT_QUEUE_HEAD(dcon_wait_queue);
+
+static unsigned short normal_i2c[] = { 0x0D, I2C_CLIENT_END };
+I2C_CLIENT_INSMOD;
+
+#define dcon_write(reg,val) i2c_smbus_write_word_data(dcon_client,reg,val)
+#define dcon_read(reg) i2c_smbus_read_word_data(dcon_client,reg)
+
+/* The current backlight value - this saves us some smbus traffic */
+static int bl_val = -1;
+
+/* ===== API functions - these are called by a variety of users ==== */
+
+/* Backlight notes - turning off the backlight enable bit in the DCON
+ * doesn't save us any power over just pushing the BL to zero, so we
+ * don't use that bit in this code.
+ */
+
+static int dcon_get_backlight(void)
+{
+	if (dcon_client == NULL)
+		return 0;
+
+	if (bl_val == -1)
+		bl_val = dcon_read(DCON_REG_BRIGHT) & 0x0F;
+
+	return bl_val;
+}
+
+static void dcon_set_backlight(int level)
+{
+	if (dcon_client == NULL)
+		return;
+
+	if (bl_val == (level & 0x0F))
+		return;
+
+	bl_val = level & 0x0F;
+	dcon_write(DCON_REG_BRIGHT, bl_val);
+
+	/* Purposely turn off the backlight when we go to level 0 */
+
+	if (bl_val == 0) {
+	  dcon_disp_mode &= ~MODE_BL_ENABLE;
+	  dcon_write(DCON_REG_MODE, dcon_disp_mode);
+	}
+	else if (!(dcon_disp_mode & MODE_BL_ENABLE)) {
+	  dcon_disp_mode |= MODE_BL_ENABLE;
+	  dcon_write(DCON_REG_MODE, dcon_disp_mode);
+	}
+}
+
+/* Set the output type to either color or mono */
+
+static int dcon_set_output(int arg)
+{
+	if (dcon_output == arg)
+		return 0;
+
+	dcon_output = arg;
+
+	if (arg == DCON_OUTPUT_MONO) {
+		dcon_disp_mode &= ~(MODE_CSWIZZLE | MODE_COL_AA);
+		dcon_disp_mode |= MODE_MONO_LUMA;
+	}
+	else {
+		dcon_disp_mode &= ~(MODE_MONO_LUMA);
+		dcon_disp_mode |= MODE_CSWIZZLE;
+		if (useaa)
+			dcon_disp_mode |= MODE_COL_AA;
+	}
+
+	dcon_write(DCON_REG_MODE, dcon_disp_mode);
+	return 0;
+}
+
+/* For now, this will be really stupid - we need to address how
+ * DCONLOAD works in a sleep and account for it accordingly
+ */
+
+static void dcon_sleep(int state)
+{
+	/* Turn off the backlight and put the DCON to sleep */
+
+	if (state == dcon_sleep_val)
+		return;
+
+	if (state == DCON_SLEEP) {
+		dcon_disp_mode &= ~MODE_BL_ENABLE;
+		dcon_disp_mode |= MODE_SLEEP;
+	}
+	else {
+		/* Only re-enable the backlight if the backlight value is set */
+
+		if (bl_val != 0)
+			dcon_disp_mode |= MODE_BL_ENABLE;
+
+		dcon_disp_mode &= ~MODE_SLEEP;
+	}
+
+	dcon_sleep_val = state;
+	dcon_write(DCON_REG_MODE, dcon_disp_mode);
+
+	/* We should turn off some stuff in the framebuffer - but what? */
+}
+
+/* Set the source of the display (CPU or DCON) */
+
+static void dcon_source_switch(struct work_struct *work)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	int source = dcon_pending;
+
+	if (dcon_source == source)
+		return;
+
+	dcon_switched = 0;
+
+	switch (source) {
+	case DCON_SOURCE_CPU:
+
+		/* Enable the scanline interrupt bit */
+		if (dcon_write(DCON_REG_MODE, dcon_disp_mode | MODE_SCAN_INT))
+			printk(KERN_ERR "olpc-dcon:  couldn't enable scanline interrupt!\n");
+		else {
+			/* Wait up to one second for the scanline interrupt */
+			wait_event_timeout(dcon_wait_queue, dcon_switched == 1, HZ);
+		}
+
+		if (!dcon_switched)
+			printk(KERN_ERR "olpc-dcon:  Timeout entering CPU mode; expect a screen glitch.\n");
+
+		/*
+		 * Ideally we'd like to disable interrupts here so that the
+		 * fb_powerup and DCON turn on happen at a known time value;
+		 * however, we can't do that right now with fb_set_suspend
+		 * messing with semaphores.
+		 *
+		 * For now, we just hope..
+		 */
+		if (fb_powerup(fbinfo)) {
+			printk(KERN_ERR "olpc-dcon:  Failed to enter CPU mode\n");
+			dcon_pending = DCON_SOURCE_DCON;
+			return;
+		}
+
+		/* And turn off the DCON */
+		outl(1<<11, gpio_base + GPIOx_OUT_VAL);
+
+		/* Turn off the scanline interrupt */
+		if (dcon_write(DCON_REG_MODE, dcon_disp_mode))
+			printk(KERN_ERR "olpc-dcon:  couldn't disable scanline interrupt!\n");
+
+		printk(KERN_INFO "olpc-dcon: The CPU has control\n");
+		break;
+	case DCON_SOURCE_DCON:
+	{
+		int t;
+
+		add_wait_queue(&dcon_wait_queue, &wait);
+		set_current_state(TASK_UNINTERRUPTIBLE);
+
+		/* Clear GPIO11 (DCONLOAD) - this implies that the DCON is in
+		   control */
+
+		outl(1 << (11 + 16), gpio_base + GPIOx_OUT_VAL);
+
+		t = schedule_timeout(HZ/2);
+		remove_wait_queue(&dcon_wait_queue, &wait);
+		set_current_state(TASK_RUNNING);
+
+		if (!dcon_switched)
+			printk(KERN_ERR "olpc-dcon: Timeout entering DCON mode; expect a screen glitch.\n");
+
+		/* Turn off the graphics engine completely */
+		fb_powerdown(fbinfo);
+
+		printk(KERN_INFO "olpc-dcon: The DCON has control\n");
+		break;
+	}
+	default:
+		BUG();
+	}
+
+	dcon_source = source;
+}
+
+static DECLARE_WORK(dcon_work, dcon_source_switch);
+
+static int dcon_set_source(int arg)
+{
+	if (arg != DCON_SOURCE_CPU && arg != DCON_SOURCE_DCON)
+		return -EINVAL;
+
+	if (dcon_pending == arg)
+		return 0;
+
+	dcon_pending = arg;
+	if ((dcon_source != arg) && !work_pending(&dcon_work))
+		schedule_work(&dcon_work);
+
+	return 0;
+}
+
+static int dcon_set_source_sync(int arg)
+{
+	int ret = dcon_set_source(arg);
+	if (!ret)
+		flush_scheduled_work();
+	return ret;
+}
+
+static int dconbl_set(struct backlight_device *dev) {
+
+	int level = dev->props.brightness;
+
+	if (dev->props.power != FB_BLANK_UNBLANK)
+		level = 0;
+
+	dcon_set_backlight(level);
+	return 0;
+}
+
+static int dconbl_get(struct backlight_device *dev) {
+	return dcon_get_backlight();
+}
+
+static ssize_t dcon_mode_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%4.4X\n", dcon_disp_mode);
+}
+
+static ssize_t dcon_sleep_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n", dcon_sleep_val);
+}
+
+static ssize_t /* __deprecated */ dcon_source_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	printk(KERN_WARNING "olpc-dcon:  using deprecated sysfs 'source' interface; use 'freeze' instead!\n");
+	return sprintf(buf, "%d\n", dcon_source);
+}
+
+static ssize_t dcon_freeze_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n", dcon_source == DCON_SOURCE_DCON ? 1 : 0);
+}
+
+static ssize_t dcon_output_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n", dcon_output);
+}
+
+static ssize_t dcon_resumeline_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n", resumeline);
+}
+
+static int _strtoul(const char *buf, int len, unsigned int *val)
+{
+
+	char *endp;
+	unsigned int output = simple_strtoul(buf, &endp, 0);
+	int size = endp - buf;
+
+	if (*endp && isspace(*endp))
+		size++;
+
+	if (size != len)
+		return -EINVAL;
+
+	*val = output;
+	return 0;
+}
+
+static ssize_t dcon_output_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	int output;
+	int rc = -EINVAL;
+
+	if (_strtoul(buf, count, &output))
+		return -EINVAL;
+
+	if (output == DCON_OUTPUT_COLOR || output == DCON_OUTPUT_MONO) {
+		dcon_set_output(output);
+		rc = count;
+	}
+
+	return rc;
+}
+
+static ssize_t /* __deprecated */ dcon_source_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	int output;
+	int rc = -EINVAL;
+
+	printk(KERN_WARNING "olpc-dcon:  using deprecated sysfs 'source' interface; use 'freeze' instead!\n");
+	if (_strtoul(buf, count, &output))
+		return -EINVAL;
+
+	dcon_set_source(output);
+	rc = count;
+
+	return rc;
+}
+
+static ssize_t dcon_freeze_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	int output;
+	int rc = -EINVAL;
+
+	if (_strtoul(buf, count, &output))
+		return rc;
+
+	dcon_set_source(output ? DCON_SOURCE_DCON : DCON_SOURCE_CPU);
+	rc = count;
+
+	return rc;
+}
+
+static ssize_t dcon_resumeline_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	int rl;
+	int rc = -EINVAL;
+
+	if (_strtoul(buf, count, &rl))
+		return rc;
+
+	resumeline = rl;
+	dcon_write(DCON_REG_SCAN_INT, resumeline);
+	rc = count;
+
+	return rc;
+}
+
+static ssize_t dcon_sleep_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	int output;
+
+	if (_strtoul(buf, count, &output))
+		return -EINVAL;
+
+	dcon_sleep(output ? DCON_SLEEP : DCON_ACTIVE);
+	return count;
+}
+
+static struct device_attribute dcon_device_files[] = {
+	__ATTR(mode, 0444, dcon_mode_show, NULL),
+	__ATTR(sleep, 0644, dcon_sleep_show, dcon_sleep_store),
+	__ATTR(source, 0644, dcon_source_show, dcon_source_store),
+	__ATTR(freeze, 0644, dcon_freeze_show, dcon_freeze_store),
+	__ATTR(output, 0644, dcon_output_show, dcon_output_store),
+	__ATTR(resumeline, 0644, dcon_resumeline_show, dcon_resumeline_store),
+};
+
+static struct backlight_ops dcon_bl_ops = {
+	.get_brightness = dconbl_get,
+	.update_status = dconbl_set
+};
+
+/* List of GPIOs that we care about:
+   (in)  GPIO12   -- DCONBLNK
+   (in)  GPIO[56] -- DCONSTAT[01]
+   (out) GPIO11   -- DCONLOAD
+*/
+
+#define IN_GPIOS ((1<<5) | (1<<6) | (1<<7) | (1<<12))
+#define OUT_GPIOS (1<<11)
+
+static irqreturn_t dcon_interrupt(int, void *);
+
+static int dcon_request_irq(void)
+{
+	unsigned long lo, hi;
+	unsigned char lob;
+
+	rdmsr(MSR_LBAR_GPIO, lo, hi);
+
+	/* Check the mask and whether GPIO is enabled (sanity check) */
+	if (hi != 0x0000f001) {
+		printk(KERN_ERR "GPIO not enabled -- cannot use DCON\n");
+		return -ENODEV;
+	}
+
+	/* Mask off the IO base address */
+	gpio_base = lo & 0x0000ff00;
+
+	/* Turn off the event enable for GPIO7 just to be safe */
+	outl(1 << (16+7), gpio_base + GPIOx_EVNT_EN);
+
+	/* Set the directions for the GPIO pins */
+	outl(OUT_GPIOS | (IN_GPIOS << 16), gpio_base + GPIOx_OUT_EN);
+	outl(IN_GPIOS | (OUT_GPIOS << 16), gpio_base + GPIOx_IN_EN);
+
+	/* Set up the interrupt mappings */
+
+	/* Set the IRQ to pair 2 */
+	geode_gpio_event_irq(OLPC_GPIO_DCON_IRQ, 2);
+
+	/* Enable group 2 to trigger the DCON interrupt */
+	geode_gpio_set_irq(2, DCON_IRQ);
+
+	/* Select edge level for interrupt (in PIC) */
+
+	lob = inb(0x4d0);
+	lob &= ~(1 << DCON_IRQ);
+	outb(lob, 0x4d0);
+
+	/* Register the interupt handler */
+	if (request_irq(DCON_IRQ, &dcon_interrupt, 0, "DCON", &dcon_driver))
+		return -EIO;
+
+	/* Clear INV_EN for GPIO7 (DCONIRQ) */
+	outl((1<<(16+7)), gpio_base + GPIOx_INV_EN);
+
+	/* Enable filter for GPIO12 (DCONBLANK) */
+	outl(1<<(12), gpio_base + GPIOx_IN_FLTR_EN);
+
+	/* Disable filter for GPIO7 */
+	outl(1<<(16+7), gpio_base + GPIOx_IN_FLTR_EN);
+
+	/* Disable event counter for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */
+
+	outl(1<<(16+7), gpio_base + GPIOx_EVNTCNT_EN);
+	outl(1<<(16+12), gpio_base + GPIOx_EVNTCNT_EN);
+
+	/* Add GPIO12 to the Filter Event Pair #7 */
+	outb(12, gpio_base + GPIO_FE7_SEL);
+
+	/* Turn off negative Edge Enable for GPIO12 */
+	outl(1<<(16+12), gpio_base + GPIOx_NEGEDGE_EN);
+
+	/* Enable negative Edge Enable for GPIO7 */
+	outl(1<<7, gpio_base + GPIOx_NEGEDGE_EN);
+
+	/* Zero the filter amount for Filter Event Pair #7 */
+	outw(0, gpio_base + GPIO_FLT7_AMNT);
+
+	/* Clear the negative edge status for GPIO7 and GPIO12 */
+	outl((1<<7) | (1<<12), gpio_base+0x4c);
+
+	/* FIXME:  Clear the posiitive status as well, just to be sure */
+	outl((1<<7) | (1<<12), gpio_base+0x48);
+
+	/* Enable events for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */
+	outl((1<<(7))|(1<<12), gpio_base + GPIOx_EVNT_EN);
+
+	/* Determine the current state by reading the GPIO bit */
+	/* Earlier stages of the boot process have established the state */
+	dcon_source = inl(gpio_base + GPIOx_OUT_VAL) & (1<<11)
+		? DCON_SOURCE_CPU
+		: DCON_SOURCE_DCON;
+	dcon_pending = dcon_source;
+
+	return 0;
+}
+
+static int dcon_reboot_notify(struct notifier_block *nb, unsigned long foo, void *bar)
+{
+	if (dcon_client == NULL)
+		return 0;
+
+	/* Turn off the DCON. Entirely. */
+	dcon_write(DCON_REG_MODE, 0x39);
+	dcon_write(DCON_REG_MODE, 0x32);
+	return 0;
+}
+
+static int dcon_conswitch_notify(struct notifier_block *nb,
+				 unsigned long mode, void *dummy)
+{
+	if (mode == CONSOLE_EVENT_SWITCH_TEXT)
+		dcon_sleep(DCON_ACTIVE);
+
+	return 0;
+}
+
+static struct notifier_block dcon_nb = {
+	.notifier_call = dcon_reboot_notify,
+	.priority = -1,
+};
+
+static struct notifier_block dcon_console_nb = {
+	.notifier_call = dcon_conswitch_notify,
+	.priority = -1,
+};
+
+static int dcon_probe(struct i2c_adapter *adap, int addr, int kind)
+{
+	struct i2c_client *client;
+	uint16_t ver;
+	int rc, i;
+
+	if (!olpc_has_dcon()) {
+		printk("olpc-dcon:  No DCON is attached.\n");
+		return -ENODEV;
+	}
+
+	if (num_registered_fb >= 1)
+		fbinfo = registered_fb[0];
+
+	if (adap->id != I2C_HW_SMBUS_SCX200) {
+		printk(KERN_ERR "olpc-dcon: Invalid I2C bus (%d not %d)\n",
+		       adap->id, I2C_HW_SMBUS_SCX200);
+		return -ENXIO;
+	}
+
+	client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	if (client == NULL)
+		return -ENOMEM;
+
+	strncpy(client->name, "OLPC-DCON", I2C_NAME_SIZE);
+	client->addr = addr;
+	client->adapter = adap;
+	client->driver = &dcon_driver;
+
+	if ((rc = i2c_attach_client(client)) != 0) {
+		printk(KERN_ERR "olpc-dcon: Unable to attach the I2C client.\n");
+		goto eclient;
+	}
+
+	ver = i2c_smbus_read_word_data(client, DCON_REG_ID);
+
+	if ((ver >> 8) != 0xDC) {
+		printk(KERN_ERR "olpc-dcon: DCON ID not 0xDCxx: 0x%04x instead.\n", ver);
+		rc = -ENXIO;
+		goto ei2c;
+	}
+
+	if ((rc = dcon_request_irq())) {
+		printk(KERN_ERR "olpc-dcon: Unable to grab IRQ.\n");
+		goto ei2c;
+	}
+
+	if (ver < 0xdc02 && !noinit) {
+		/* Initialize the DCON registers */
+
+		/* Start with work-arounds for DCON ASIC */
+		i2c_smbus_write_word_data(client, 0x4b, 0x00cc);
+		i2c_smbus_write_word_data(client, 0x4b, 0x00cc);
+		i2c_smbus_write_word_data(client, 0x4b, 0x00cc);
+		i2c_smbus_write_word_data(client, 0x0b, 0x007a);
+		i2c_smbus_write_word_data(client, 0x36, 0x025c);
+		i2c_smbus_write_word_data(client, 0x37, 0x025e);
+		
+		/* Initialise SDRAM */
+
+		i2c_smbus_write_word_data(client, 0x3b, 0x002b);
+		i2c_smbus_write_word_data(client, 0x41, 0x0101);
+		i2c_smbus_write_word_data(client, 0x42, 0x0101);
+	}
+
+	/* Colour swizzle, AA, no passthrough, backlight */
+
+	dcon_disp_mode = MODE_PASSTHRU | MODE_BL_ENABLE | MODE_CSWIZZLE;
+	if (useaa)
+		dcon_disp_mode |= MODE_COL_AA;
+	i2c_smbus_write_word_data(client, DCON_REG_MODE, dcon_disp_mode);
+
+
+	/* Set the scanline to interrupt on during resume */
+
+	i2c_smbus_write_word_data(client, DCON_REG_SCAN_INT, resumeline);
+
+	/* Add the DCON device */
+
+	dcon_device = platform_device_alloc("dcon", -1);
+
+	if (dcon_device == NULL) {
+		printk(KERN_ERR "dcon:  Unable to create the DCON device\n");
+		rc = -ENOMEM;
+		goto eirq;
+	}
+
+	if ((rc = platform_device_add(dcon_device))) {
+		printk(KERN_ERR "dcon:  Unable to add the DCON device\n");
+		goto edev;
+	}
+
+	for(i = 0; i < ARRAY_SIZE(dcon_device_files); i++)
+		device_create_file(&dcon_device->dev, &dcon_device_files[i]);
+
+	/* Add the backlight device for the DCON */
+
+	dcon_client = client;
+
+	dcon_bl_dev = backlight_device_register("dcon-bl", &dcon_device->dev,
+		NULL, &dcon_bl_ops);
+
+	if (IS_ERR(dcon_bl_dev)) {
+		printk(KERN_INFO "Could not register the backlight device for the DCON (%ld)\n", PTR_ERR(dcon_bl_dev));
+		dcon_bl_dev = NULL;
+	}
+	else {
+		dcon_bl_dev->props.max_brightness = 15;
+		dcon_bl_dev->props.power = FB_BLANK_UNBLANK;
+		dcon_bl_dev->props.brightness = dcon_get_backlight();
+
+		backlight_update_status(dcon_bl_dev);
+	}
+
+	register_reboot_notifier(&dcon_nb);
+	console_event_register(&dcon_console_nb);
+
+	printk(KERN_INFO "olpc-dcon: Discovered DCON version %x\n", ver & 0xFF);
+
+	return 0;
+
+ edev:
+	platform_device_unregister(dcon_device);
+	dcon_device = NULL;
+ eirq:
+	free_irq(DCON_IRQ, &dcon_driver);
+ ei2c:
+	i2c_detach_client(client);
+ eclient:
+	kfree(client);
+
+	return rc;
+}
+
+static int dcon_attach(struct i2c_adapter *adap)
+{
+	int ret;
+
+	ret = i2c_probe(adap, &addr_data, dcon_probe);
+
+	if (dcon_client == NULL)
+		printk(KERN_ERR "olpc-dcon: No DCON found on SMBus\n");
+
+	return ret;
+}
+
+static int dcon_detach(struct i2c_client *client)
+{
+	int rc;
+	dcon_client = NULL;
+
+	unregister_reboot_notifier(&dcon_nb);
+	console_event_unregister(&dcon_console_nb);
+
+	free_irq(DCON_IRQ, &dcon_driver);
+
+	if ((rc = i2c_detach_client(client)) == 0)
+		kfree(i2c_get_clientdata(client));
+
+	if (dcon_bl_dev != NULL)
+		backlight_device_unregister(dcon_bl_dev);
+
+	if (dcon_device != NULL)
+		platform_device_unregister(dcon_device);
+	cancel_work_sync(&dcon_work);
+
+	return rc;
+}
+
+
+#ifdef CONFIG_PM
+static int dcon_suspend(struct i2c_client *client, pm_message_t state)
+{
+	if (dcon_sleep_val != DCON_ACTIVE)
+		return 0;
+
+	/* Set up the DCON to have the source */
+	return dcon_set_source_sync(DCON_SOURCE_DCON);
+}
+
+static int dcon_resume(struct i2c_client *client)
+{
+	int x;
+	if (dcon_sleep_val != DCON_ACTIVE)
+		return 0;
+
+	/* HACK: ensure the bus is stable */
+	do {
+		x = dcon_read(DCON_REG_ID);
+	} while (x < 0);
+
+	return dcon_set_source(DCON_SOURCE_CPU);
+}
+
+#endif
+
+static irqreturn_t dcon_interrupt(int irq, void *id)
+{
+	int status = inl(gpio_base + GPIOx_READ_BACK) >> 5;
+
+	/* Clear the negative edge status for GPIO7 */
+	outl(1 << 7, gpio_base + GPIOx_NEGEDGE_STS);
+
+	switch (status & 3) {
+	case 3:
+		printk(KERN_DEBUG "olpc-dcon: DCONLOAD_MISSED interrupt\n");
+		break;
+	case 2:	/* switch to DCON mode */
+	case 1: /* switch to CPU mode */
+		dcon_switched = 1;
+		wake_up(&dcon_wait_queue);
+		break;
+	case 0:
+		printk(KERN_DEBUG "olpc-dcon: scanline interrupt w/CPU\n");
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct i2c_driver dcon_driver = {
+	.driver = {
+		.name	= "OLPC-DCON",
+	},
+	.id = I2C_DRIVERID_DCON,
+	.attach_adapter = dcon_attach,
+	.detach_client = dcon_detach,
+#ifdef CONFIG_PM
+	.suspend = dcon_suspend,
+	.resume = dcon_resume,
+#endif
+};
+
+
+static int __init olpc_dcon_init(void)
+{
+	i2c_add_driver(&dcon_driver);
+	return 0;
+}
+
+static void __exit olpc_dcon_exit(void)
+{
+	i2c_del_driver(&dcon_driver);
+}
+
+module_init(olpc_dcon_init);
+module_exit(olpc_dcon_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/olpc_dcon.h b/drivers/video/olpc_dcon.h
new file mode 100644
index 0000000..6453ca4
--- /dev/null
+++ b/drivers/video/olpc_dcon.h
@@ -0,0 +1,75 @@
+#ifndef OLPC_DCON_H_
+#define OLPC_DCON_H_
+
+/* DCON registers */
+
+#define DCON_REG_ID		 0
+#define DCON_REG_MODE		 1
+
+#define MODE_PASSTHRU	(1<<0)
+#define MODE_SLEEP	(1<<1)
+#define MODE_SLEEP_AUTO	(1<<2)
+#define MODE_BL_ENABLE	(1<<3)
+#define MODE_BLANK	(1<<4)
+#define MODE_CSWIZZLE	(1<<5)
+#define MODE_COL_AA	(1<<6)
+#define MODE_MONO_LUMA	(1<<7)
+#define MODE_SCAN_INT	(1<<8)
+#define MODE_CLOCKDIV	(1<<9)
+#define MODE_DEBUG	(1<<14)
+#define MODE_SELFTEST	(1<<15)
+
+#define DCON_REG_HRES		2
+#define DCON_REG_HTOTAL		3
+#define DCON_REG_HSYNC_WIDTH	4
+#define DCON_REG_VRES		5
+#define DCON_REG_VTOTAL		6
+#define DCON_REG_VSYNC_WIDTH	7
+#define DCON_REG_TIMEOUT	8
+#define DCON_REG_SCAN_INT	9
+#define DCON_REG_BRIGHT		10
+
+/* GPIO registers (CS5536) */
+
+#define MSR_LBAR_GPIO		0x5140000C
+
+#define GPIOx_OUT_VAL     0x00
+#define GPIOx_OUT_EN      0x04
+#define GPIOx_IN_EN       0x20
+#define GPIOx_INV_EN      0x24
+#define GPIOx_IN_FLTR_EN  0x28
+#define GPIOx_EVNTCNT_EN  0x2C
+#define GPIOx_READ_BACK   0x30
+#define GPIOx_EVNT_EN     0x38
+#define GPIOx_NEGEDGE_EN  0x44
+#define GPIOx_NEGEDGE_STS 0x4C
+#define GPIO_FLT7_AMNT    0xD8
+#define GPIO_MAP_X        0xE0
+#define GPIO_MAP_Y        0xE4
+#define GPIO_FE7_SEL      0xF7
+
+
+/* Status values */
+
+#define DCONSTAT_SCANINT	0
+#define DCONSTAT_SCANINT_DCON	1
+#define DCONSTAT_DISPLAYLOAD	2
+#define DCONSTAT_MISSED		3
+
+/* Source values */
+
+#define DCON_SOURCE_DCON        0
+#define DCON_SOURCE_CPU         1
+
+/* Output values */
+#define DCON_OUTPUT_COLOR       0
+#define DCON_OUTPUT_MONO        1
+
+/* Sleep values */
+#define DCON_ACTIVE             0
+#define DCON_SLEEP              1
+
+/* Interrupt */
+#define DCON_IRQ                6
+
+#endif
diff --git a/fs/Kconfig b/fs/Kconfig
index f9eed6d..6fa3ea2 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -999,6 +999,23 @@ config HUGETLBFS
 config HUGETLB_PAGE
 	def_bool HUGETLBFS
 
+config PROMFS_FS
+	tristate "PromFS IEEE 1275 file system support"
+	depends on SPARC || PPC || OLPC
+	help
+	  PromFS is a file system interface to various IEEE-1275 compatible
+	  firmwares.  If you have such a firmware (Sparc64, PowerPC, and
+	  some other architectures and embedded systems have such firmwares,
+	  with names like "OpenBoot (tm)" and "OpenFirmware"), say Y here
+	  to be able to access the firmware's device-tree from Linux.
+
+	  The firmware device-tree is available as a virtual file system,
+	  can be mounted under /prom with the command "mount -t promfs
+	  none /prom".
+
+	  To compile PromFS support as a module, choose M here; the module
+	  will be called promfs.  If unsure, choose M.
+
 config RAMFS
 	bool
 	default y
@@ -1225,6 +1242,14 @@ config JFFS2_FS_WRITEBUFFER
 	    - NOR flash with transparent ECC
 	    - DataFlash
 
+config JFFS2_FS_WBUF_VERIFY
+	bool "Verify JFFS2 write-buffer reads"
+	depends on JFFS2_FS_WRITEBUFFER
+	default n
+	help
+	  This causes JFFS2 to read back every page written through the
+	  write-buffer, and check for errors.
+
 config JFFS2_SUMMARY
 	bool "JFFS2 summary support (EXPERIMENTAL)"
 	depends on JFFS2_FS && EXPERIMENTAL
@@ -1295,52 +1320,52 @@ config JFFS2_ZLIB
 	select ZLIB_DEFLATE
 	depends on JFFS2_FS
 	default y
-        help
-          Zlib is designed to be a free, general-purpose, legally unencumbered,
-          lossless data-compression library for use on virtually any computer
-          hardware and operating system. See <http://www.gzip.org/zlib/> for
-          further information.
+	help
+	  Zlib is designed to be a free, general-purpose, legally unencumbered,
+	  lossless data-compression library for use on virtually any computer
+	  hardware and operating system. See <http://www.gzip.org/zlib/> for
+	  further information.
 
-          Say 'Y' if unsure.
+	  Say 'Y' if unsure.
 
 config JFFS2_RTIME
 	bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
 	depends on JFFS2_FS
 	default y
-        help
-          Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
+	help
+	  Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
 
 config JFFS2_RUBIN
 	bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
 	depends on JFFS2_FS
 	default n
-        help
-          RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
+	help
+	  RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
 
 choice
-        prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
-        default JFFS2_CMODE_PRIORITY
-        depends on JFFS2_FS
-        help
-          You can set here the default compression mode of JFFS2 from
-          the available compression modes. Don't touch if unsure.
+	prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
+	default JFFS2_CMODE_PRIORITY
+	depends on JFFS2_FS
+	help
+	  You can set here the default compression mode of JFFS2 from
+	  the available compression modes. Don't touch if unsure.
 
 config JFFS2_CMODE_NONE
-        bool "no compression"
-        help
-          Uses no compression.
+	bool "no compression"
+	help
+	  Uses no compression.
 
 config JFFS2_CMODE_PRIORITY
-        bool "priority"
-        help
-          Tries the compressors in a predefined order and chooses the first
-          successful one.
+	bool "priority"
+	help
+	  Tries the compressors in a predefined order and chooses the first
+	  successful one.
 
 config JFFS2_CMODE_SIZE
-        bool "size (EXPERIMENTAL)"
-        help
-          Tries all compressors and chooses the one which has the smallest
-          result.
+	bool "size (EXPERIMENTAL)"
+	help
+	  Tries all compressors and chooses the one which has the smallest
+	  result.
 
 endchoice
 
diff --git a/fs/Makefile b/fs/Makefile
index 720c29d..61f1a4d 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -108,6 +108,7 @@ obj-$(CONFIG_ADFS_FS)		+= adfs/
 obj-$(CONFIG_FUSE_FS)		+= fuse/
 obj-$(CONFIG_UDF_FS)		+= udf/
 obj-$(CONFIG_SUN_OPENPROMFS)	+= openpromfs/
+obj-$(CONFIG_PROMFS_FS)		+= promfs/
 obj-$(CONFIG_JFS_FS)		+= jfs/
 obj-$(CONFIG_XFS_FS)		+= xfs/
 obj-$(CONFIG_9P_FS)		+= 9p/
diff --git a/fs/jffs2/background.c b/fs/jffs2/background.c
index 504643f..d568ae8 100644
--- a/fs/jffs2/background.c
+++ b/fs/jffs2/background.c
@@ -23,8 +23,8 @@ static int jffs2_garbage_collect_thread(void *);
 void jffs2_garbage_collect_trigger(struct jffs2_sb_info *c)
 {
 	spin_lock(&c->erase_completion_lock);
-        if (c->gc_task && jffs2_thread_should_wake(c))
-                send_sig(SIGHUP, c->gc_task, 1);
+	if (c->gc_task && jffs2_thread_should_wake(c))
+		send_sig(SIGHUP, c->gc_task, 1);
 	spin_unlock(&c->erase_completion_lock);
 }
 
diff --git a/fs/jffs2/compr.c b/fs/jffs2/compr.c
index 485d065..d90ca05 100644
--- a/fs/jffs2/compr.c
+++ b/fs/jffs2/compr.c
@@ -5,7 +5,7 @@
  * Created by Arjan van de Ven <arjanv@redhat.com>
  *
  * Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
- *                    University of Szeged, Hungary
+ *		    University of Szeged, Hungary
  *
  * For licensing information, see the file 'LICENCE' in this directory.
  *
@@ -43,121 +43,122 @@ static uint32_t none_stat_compr_blocks=0,none_stat_decompr_blocks=0,none_stat_co
  * *datalen accordingly to show the amount of data which were compressed.
  */
 uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
-			     unsigned char *data_in, unsigned char **cpage_out,
-			     uint32_t *datalen, uint32_t *cdatalen)
+			unsigned char *data_in, unsigned char **cpage_out,
+			uint32_t *datalen, uint32_t *cdatalen)
 {
 	int ret = JFFS2_COMPR_NONE;
-        int compr_ret;
-        struct jffs2_compressor *this, *best=NULL;
-        unsigned char *output_buf = NULL, *tmp_buf;
-        uint32_t orig_slen, orig_dlen;
-        uint32_t best_slen=0, best_dlen=0;
+	int compr_ret;
+	struct jffs2_compressor *this, *best=NULL;
+	unsigned char *output_buf = NULL, *tmp_buf;
+	uint32_t orig_slen, orig_dlen;
+	uint32_t best_slen=0, best_dlen=0;
 
-        switch (jffs2_compression_mode) {
-        case JFFS2_COMPR_MODE_NONE:
-                break;
-        case JFFS2_COMPR_MODE_PRIORITY:
-                output_buf = kmalloc(*cdatalen,GFP_KERNEL);
-                if (!output_buf) {
-                        printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
-                        goto out;
-                }
-                orig_slen = *datalen;
-                orig_dlen = *cdatalen;
-                spin_lock(&jffs2_compressor_list_lock);
-                list_for_each_entry(this, &jffs2_compressor_list, list) {
-                        /* Skip decompress-only backwards-compatibility and disabled modules */
-                        if ((!this->compress)||(this->disabled))
-                                continue;
+	switch (jffs2_compression_mode) {
+	case JFFS2_COMPR_MODE_NONE:
+		break;
+	case JFFS2_COMPR_MODE_PRIORITY:
+		output_buf = kmalloc(*cdatalen,GFP_KERNEL);
+		if (!output_buf) {
+			printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
+			goto out;
+		}
+		orig_slen = *datalen;
+		orig_dlen = *cdatalen;
+		spin_lock(&jffs2_compressor_list_lock);
+		list_for_each_entry(this, &jffs2_compressor_list, list) {
+			/* Skip decompress-only backwards-compatibility and disabled modules */
+			if ((!this->compress)||(this->disabled))
+				continue;
 
-                        this->usecount++;
-                        spin_unlock(&jffs2_compressor_list_lock);
-                        *datalen  = orig_slen;
-                        *cdatalen = orig_dlen;
-                        compr_ret = this->compress(data_in, output_buf, datalen, cdatalen, NULL);
-                        spin_lock(&jffs2_compressor_list_lock);
-                        this->usecount--;
-                        if (!compr_ret) {
-                                ret = this->compr;
-                                this->stat_compr_blocks++;
-                                this->stat_compr_orig_size += *datalen;
-                                this->stat_compr_new_size  += *cdatalen;
-                                break;
-                        }
-                }
-                spin_unlock(&jffs2_compressor_list_lock);
-                if (ret == JFFS2_COMPR_NONE) kfree(output_buf);
-                break;
-        case JFFS2_COMPR_MODE_SIZE:
-                orig_slen = *datalen;
-                orig_dlen = *cdatalen;
-                spin_lock(&jffs2_compressor_list_lock);
-                list_for_each_entry(this, &jffs2_compressor_list, list) {
-                        /* Skip decompress-only backwards-compatibility and disabled modules */
-                        if ((!this->compress)||(this->disabled))
-                                continue;
-                        /* Allocating memory for output buffer if necessary */
-                        if ((this->compr_buf_size<orig_dlen)&&(this->compr_buf)) {
-                                spin_unlock(&jffs2_compressor_list_lock);
-                                kfree(this->compr_buf);
-                                spin_lock(&jffs2_compressor_list_lock);
-                                this->compr_buf_size=0;
-                                this->compr_buf=NULL;
-                        }
-                        if (!this->compr_buf) {
-                                spin_unlock(&jffs2_compressor_list_lock);
-                                tmp_buf = kmalloc(orig_dlen,GFP_KERNEL);
-                                spin_lock(&jffs2_compressor_list_lock);
-                                if (!tmp_buf) {
-                                        printk(KERN_WARNING "JFFS2: No memory for compressor allocation. (%d bytes)\n",orig_dlen);
-                                        continue;
-                                }
-                                else {
-                                        this->compr_buf = tmp_buf;
-                                        this->compr_buf_size = orig_dlen;
-                                }
-                        }
-                        this->usecount++;
-                        spin_unlock(&jffs2_compressor_list_lock);
-                        *datalen  = orig_slen;
-                        *cdatalen = orig_dlen;
-                        compr_ret = this->compress(data_in, this->compr_buf, datalen, cdatalen, NULL);
-                        spin_lock(&jffs2_compressor_list_lock);
-                        this->usecount--;
-                        if (!compr_ret) {
-                                if ((!best_dlen)||(best_dlen>*cdatalen)) {
-                                        best_dlen = *cdatalen;
-                                        best_slen = *datalen;
-                                        best = this;
-                                }
-                        }
-                }
-                if (best_dlen) {
-                        *cdatalen = best_dlen;
-                        *datalen  = best_slen;
-                        output_buf = best->compr_buf;
-                        best->compr_buf = NULL;
-                        best->compr_buf_size = 0;
-                        best->stat_compr_blocks++;
-                        best->stat_compr_orig_size += best_slen;
-                        best->stat_compr_new_size  += best_dlen;
-                        ret = best->compr;
-                }
-                spin_unlock(&jffs2_compressor_list_lock);
-                break;
-        default:
-                printk(KERN_ERR "JFFS2: unknow compression mode.\n");
-        }
+			this->usecount++;
+			spin_unlock(&jffs2_compressor_list_lock);
+			*datalen  = orig_slen;
+			*cdatalen = orig_dlen;
+			compr_ret = this->compress(data_in, output_buf, datalen, cdatalen, NULL);
+			spin_lock(&jffs2_compressor_list_lock);
+			this->usecount--;
+			if (!compr_ret) {
+				ret = this->compr;
+				this->stat_compr_blocks++;
+				this->stat_compr_orig_size += *datalen;
+				this->stat_compr_new_size  += *cdatalen;
+				break;
+			}
+		}
+		spin_unlock(&jffs2_compressor_list_lock);
+		if (ret == JFFS2_COMPR_NONE)
+			kfree(output_buf);
+		break;
+	case JFFS2_COMPR_MODE_SIZE:
+		orig_slen = *datalen;
+		orig_dlen = *cdatalen;
+		spin_lock(&jffs2_compressor_list_lock);
+		list_for_each_entry(this, &jffs2_compressor_list, list) {
+			/* Skip decompress-only backwards-compatibility and disabled modules */
+			if ((!this->compress)||(this->disabled))
+				continue;
+			/* Allocating memory for output buffer if necessary */
+			if ((this->compr_buf_size<orig_dlen)&&(this->compr_buf)) {
+				spin_unlock(&jffs2_compressor_list_lock);
+				kfree(this->compr_buf);
+				spin_lock(&jffs2_compressor_list_lock);
+				this->compr_buf_size=0;
+				this->compr_buf=NULL;
+			}
+			if (!this->compr_buf) {
+				spin_unlock(&jffs2_compressor_list_lock);
+				tmp_buf = kmalloc(orig_dlen,GFP_KERNEL);
+				spin_lock(&jffs2_compressor_list_lock);
+				if (!tmp_buf) {
+					printk(KERN_WARNING "JFFS2: No memory for compressor allocation. (%d bytes)\n",orig_dlen);
+					continue;
+				}
+				else {
+					this->compr_buf = tmp_buf;
+					this->compr_buf_size = orig_dlen;
+				}
+			}
+			this->usecount++;
+			spin_unlock(&jffs2_compressor_list_lock);
+			*datalen  = orig_slen;
+			*cdatalen = orig_dlen;
+			compr_ret = this->compress(data_in, this->compr_buf, datalen, cdatalen, NULL);
+			spin_lock(&jffs2_compressor_list_lock);
+			this->usecount--;
+			if (!compr_ret) {
+				if ((!best_dlen)||(best_dlen>*cdatalen)) {
+					best_dlen = *cdatalen;
+					best_slen = *datalen;
+					best = this;
+				}
+			}
+		}
+		if (best_dlen) {
+			*cdatalen = best_dlen;
+			*datalen  = best_slen;
+			output_buf = best->compr_buf;
+			best->compr_buf = NULL;
+			best->compr_buf_size = 0;
+			best->stat_compr_blocks++;
+			best->stat_compr_orig_size += best_slen;
+			best->stat_compr_new_size  += best_dlen;
+			ret = best->compr;
+		}
+		spin_unlock(&jffs2_compressor_list_lock);
+		break;
+	default:
+		printk(KERN_ERR "JFFS2: unknow compression mode.\n");
+	}
  out:
-        if (ret == JFFS2_COMPR_NONE) {
-	        *cpage_out = data_in;
-	        *datalen = *cdatalen;
-                none_stat_compr_blocks++;
-                none_stat_compr_size += *datalen;
-        }
-        else {
-                *cpage_out = output_buf;
-        }
+	if (ret == JFFS2_COMPR_NONE) {
+		*cpage_out = data_in;
+		*datalen = *cdatalen;
+		none_stat_compr_blocks++;
+		none_stat_compr_size += *datalen;
+	}
+	else {
+		*cpage_out = output_buf;
+	}
 	return ret;
 }
 
@@ -165,8 +166,8 @@ int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
 		     uint16_t comprtype, unsigned char *cdata_in,
 		     unsigned char *data_out, uint32_t cdatalen, uint32_t datalen)
 {
-        struct jffs2_compressor *this;
-        int ret;
+	struct jffs2_compressor *this;
+	int ret;
 
 	/* Older code had a bug where it would write non-zero 'usercompr'
 	   fields. Deal with it. */
@@ -177,32 +178,32 @@ int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
 	case JFFS2_COMPR_NONE:
 		/* This should be special-cased elsewhere, but we might as well deal with it */
 		memcpy(data_out, cdata_in, datalen);
-                none_stat_decompr_blocks++;
+		none_stat_decompr_blocks++;
 		break;
 	case JFFS2_COMPR_ZERO:
 		memset(data_out, 0, datalen);
 		break;
 	default:
-                spin_lock(&jffs2_compressor_list_lock);
-                list_for_each_entry(this, &jffs2_compressor_list, list) {
-                        if (comprtype == this->compr) {
-                                this->usecount++;
-                                spin_unlock(&jffs2_compressor_list_lock);
-                                ret = this->decompress(cdata_in, data_out, cdatalen, datalen, NULL);
-                                spin_lock(&jffs2_compressor_list_lock);
-                                if (ret) {
-                                        printk(KERN_WARNING "Decompressor \"%s\" returned %d\n", this->name, ret);
-                                }
-                                else {
-                                        this->stat_decompr_blocks++;
-                                }
-                                this->usecount--;
-                                spin_unlock(&jffs2_compressor_list_lock);
-                                return ret;
-                        }
-                }
+		spin_lock(&jffs2_compressor_list_lock);
+		list_for_each_entry(this, &jffs2_compressor_list, list) {
+			if (comprtype == this->compr) {
+				this->usecount++;
+				spin_unlock(&jffs2_compressor_list_lock);
+				ret = this->decompress(cdata_in, data_out, cdatalen, datalen, NULL);
+				spin_lock(&jffs2_compressor_list_lock);
+				if (ret) {
+					printk(KERN_WARNING "Decompressor \"%s\" returned %d\n", this->name, ret);
+				}
+				else {
+					this->stat_decompr_blocks++;
+				}
+				this->usecount--;
+				spin_unlock(&jffs2_compressor_list_lock);
+				return ret;
+			}
+		}
 		printk(KERN_WARNING "JFFS2 compression type 0x%02x not available.\n", comprtype);
-                spin_unlock(&jffs2_compressor_list_lock);
+		spin_unlock(&jffs2_compressor_list_lock);
 		return -EIO;
 	}
 	return 0;
@@ -210,108 +211,108 @@ int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
 
 int jffs2_register_compressor(struct jffs2_compressor *comp)
 {
-        struct jffs2_compressor *this;
+	struct jffs2_compressor *this;
 
-        if (!comp->name) {
-                printk(KERN_WARNING "NULL compressor name at registering JFFS2 compressor. Failed.\n");
-                return -1;
-        }
-        comp->compr_buf_size=0;
-        comp->compr_buf=NULL;
-        comp->usecount=0;
-        comp->stat_compr_orig_size=0;
-        comp->stat_compr_new_size=0;
-        comp->stat_compr_blocks=0;
-        comp->stat_decompr_blocks=0;
-        D1(printk(KERN_DEBUG "Registering JFFS2 compressor \"%s\"\n", comp->name));
+	if (!comp->name) {
+		printk(KERN_WARNING "NULL compressor name at registering JFFS2 compressor. Failed.\n");
+		return -1;
+	}
+	comp->compr_buf_size=0;
+	comp->compr_buf=NULL;
+	comp->usecount=0;
+	comp->stat_compr_orig_size=0;
+	comp->stat_compr_new_size=0;
+	comp->stat_compr_blocks=0;
+	comp->stat_decompr_blocks=0;
+	D1(printk(KERN_DEBUG "Registering JFFS2 compressor \"%s\"\n", comp->name));
 
-        spin_lock(&jffs2_compressor_list_lock);
+	spin_lock(&jffs2_compressor_list_lock);
 
-        list_for_each_entry(this, &jffs2_compressor_list, list) {
-                if (this->priority < comp->priority) {
-                        list_add(&comp->list, this->list.prev);
-                        goto out;
-                }
-        }
-        list_add_tail(&comp->list, &jffs2_compressor_list);
+	list_for_each_entry(this, &jffs2_compressor_list, list) {
+		if (this->priority < comp->priority) {
+			list_add(&comp->list, this->list.prev);
+			goto out;
+		}
+	}
+	list_add_tail(&comp->list, &jffs2_compressor_list);
 out:
-        D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
-                printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
-        })
+	D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
+		printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
+	})
 
-        spin_unlock(&jffs2_compressor_list_lock);
+	spin_unlock(&jffs2_compressor_list_lock);
 
-        return 0;
+	return 0;
 }
 
 int jffs2_unregister_compressor(struct jffs2_compressor *comp)
 {
-        D2(struct jffs2_compressor *this;)
+	D2(struct jffs2_compressor *this;)
 
-        D1(printk(KERN_DEBUG "Unregistering JFFS2 compressor \"%s\"\n", comp->name));
+	D1(printk(KERN_DEBUG "Unregistering JFFS2 compressor \"%s\"\n", comp->name));
 
-        spin_lock(&jffs2_compressor_list_lock);
+	spin_lock(&jffs2_compressor_list_lock);
 
-        if (comp->usecount) {
-                spin_unlock(&jffs2_compressor_list_lock);
-                printk(KERN_WARNING "JFFS2: Compressor modul is in use. Unregister failed.\n");
-                return -1;
-        }
-        list_del(&comp->list);
+	if (comp->usecount) {
+		spin_unlock(&jffs2_compressor_list_lock);
+		printk(KERN_WARNING "JFFS2: Compressor modul is in use. Unregister failed.\n");
+		return -1;
+	}
+	list_del(&comp->list);
 
-        D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
-                printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
-        })
-        spin_unlock(&jffs2_compressor_list_lock);
-        return 0;
+	D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
+		printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
+	})
+	spin_unlock(&jffs2_compressor_list_lock);
+	return 0;
 }
 
 void jffs2_free_comprbuf(unsigned char *comprbuf, unsigned char *orig)
 {
-        if (orig != comprbuf)
-                kfree(comprbuf);
+	if (orig != comprbuf)
+		kfree(comprbuf);
 }
 
 int __init jffs2_compressors_init(void)
 {
 /* Registering compressors */
 #ifdef CONFIG_JFFS2_ZLIB
-        jffs2_zlib_init();
+	jffs2_zlib_init();
 #endif
 #ifdef CONFIG_JFFS2_RTIME
-        jffs2_rtime_init();
+	jffs2_rtime_init();
 #endif
 #ifdef CONFIG_JFFS2_RUBIN
-        jffs2_rubinmips_init();
-        jffs2_dynrubin_init();
+	jffs2_rubinmips_init();
+	jffs2_dynrubin_init();
 #endif
 /* Setting default compression mode */
 #ifdef CONFIG_JFFS2_CMODE_NONE
-        jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
-        D1(printk(KERN_INFO "JFFS2: default compression mode: none\n");)
+	jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
+	D1(printk(KERN_INFO "JFFS2: default compression mode: none\n");)
 #else
 #ifdef CONFIG_JFFS2_CMODE_SIZE
-        jffs2_compression_mode = JFFS2_COMPR_MODE_SIZE;
-        D1(printk(KERN_INFO "JFFS2: default compression mode: size\n");)
+	jffs2_compression_mode = JFFS2_COMPR_MODE_SIZE;
+	D1(printk(KERN_INFO "JFFS2: default compression mode: size\n");)
 #else
-        D1(printk(KERN_INFO "JFFS2: default compression mode: priority\n");)
+	D1(printk(KERN_INFO "JFFS2: default compression mode: priority\n");)
 #endif
 #endif
-        return 0;
+	return 0;
 }
 
 int jffs2_compressors_exit(void)
 {
 /* Unregistering compressors */
 #ifdef CONFIG_JFFS2_RUBIN
-        jffs2_dynrubin_exit();
-        jffs2_rubinmips_exit();
+	jffs2_dynrubin_exit();
+	jffs2_rubinmips_exit();
 #endif
 #ifdef CONFIG_JFFS2_RTIME
-        jffs2_rtime_exit();
+	jffs2_rtime_exit();
 #endif
 #ifdef CONFIG_JFFS2_ZLIB
-        jffs2_zlib_exit();
+	jffs2_zlib_exit();
 #endif
-        return 0;
+	return 0;
 }
diff --git a/fs/jffs2/compr.h b/fs/jffs2/compr.h
index 68cc701..1070275 100644
--- a/fs/jffs2/compr.h
+++ b/fs/jffs2/compr.h
@@ -2,7 +2,7 @@
  * JFFS2 -- Journalling Flash File System, Version 2.
  *
  * Copyright © 2004   Ferenc Havasi <havasi@inf.u-szeged.hu>,
- *                    University of Szeged, Hungary
+ *		      University of Szeged, Hungary
  *
  * For licensing information, see the file 'LICENCE' in this directory.
  *
@@ -32,29 +32,29 @@
 #define JFFS2_ZLIB_PRIORITY      60
 
 #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */
-#define JFFS2_DYNRUBIN_DISABLED  /*        for decompression */
+#define JFFS2_DYNRUBIN_DISABLED  /*	   for decompression */
 
 #define JFFS2_COMPR_MODE_NONE       0
 #define JFFS2_COMPR_MODE_PRIORITY   1
 #define JFFS2_COMPR_MODE_SIZE       2
 
 struct jffs2_compressor {
-        struct list_head list;
-        int priority;              /* used by prirority comr. mode */
-        char *name;
-        char compr;                /* JFFS2_COMPR_XXX */
-        int (*compress)(unsigned char *data_in, unsigned char *cpage_out,
-                        uint32_t *srclen, uint32_t *destlen, void *model);
-        int (*decompress)(unsigned char *cdata_in, unsigned char *data_out,
-                        uint32_t cdatalen, uint32_t datalen, void *model);
-        int usecount;
-        int disabled;              /* if seted the compressor won't compress */
-        unsigned char *compr_buf;  /* used by size compr. mode */
-        uint32_t compr_buf_size;   /* used by size compr. mode */
-        uint32_t stat_compr_orig_size;
-        uint32_t stat_compr_new_size;
-        uint32_t stat_compr_blocks;
-        uint32_t stat_decompr_blocks;
+	struct list_head list;
+	int priority;			/* used by prirority comr. mode */
+	char *name;
+	char compr;			/* JFFS2_COMPR_XXX */
+	int (*compress)(unsigned char *data_in, unsigned char *cpage_out,
+			uint32_t *srclen, uint32_t *destlen, void *model);
+	int (*decompress)(unsigned char *cdata_in, unsigned char *data_out,
+			  uint32_t cdatalen, uint32_t datalen, void *model);
+	int usecount;
+	int disabled;		/* if set the compressor won't compress */
+	unsigned char *compr_buf;	/* used by size compr. mode */
+	uint32_t compr_buf_size;	/* used by size compr. mode */
+	uint32_t stat_compr_orig_size;
+	uint32_t stat_compr_new_size;
+	uint32_t stat_compr_blocks;
+	uint32_t stat_decompr_blocks;
 };
 
 int jffs2_register_compressor(struct jffs2_compressor *comp);
@@ -64,12 +64,12 @@ int jffs2_compressors_init(void);
 int jffs2_compressors_exit(void);
 
 uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
-                             unsigned char *data_in, unsigned char **cpage_out,
-                             uint32_t *datalen, uint32_t *cdatalen);
+			unsigned char *data_in, unsigned char **cpage_out,
+			uint32_t *datalen, uint32_t *cdatalen);
 
 int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
-                     uint16_t comprtype, unsigned char *cdata_in,
-                     unsigned char *data_out, uint32_t cdatalen, uint32_t datalen);
+		     uint16_t comprtype, unsigned char *cdata_in,
+		     unsigned char *data_out, uint32_t cdatalen, uint32_t datalen);
 
 void jffs2_free_comprbuf(unsigned char *comprbuf, unsigned char *orig);
 
diff --git a/fs/jffs2/compr_rtime.c b/fs/jffs2/compr_rtime.c
index 0d0bfd2..546d153 100644
--- a/fs/jffs2/compr_rtime.c
+++ b/fs/jffs2/compr_rtime.c
@@ -104,7 +104,7 @@ static int jffs2_rtime_decompress(unsigned char *data_in,
 			}
 		}
 	}
-        return 0;
+	return 0;
 }
 
 static struct jffs2_compressor jffs2_rtime_comp = {
diff --git a/fs/jffs2/compr_rubin.c b/fs/jffs2/compr_rubin.c
index ea0431e..c73fa89 100644
--- a/fs/jffs2/compr_rubin.c
+++ b/fs/jffs2/compr_rubin.c
@@ -384,7 +384,7 @@ static int jffs2_rubinmips_decompress(unsigned char *data_in,
 				      void *model)
 {
 	rubin_do_decompress(BIT_DIVIDER_MIPS, bits_mips, data_in, cpage_out, sourcelen, dstlen);
-        return 0;
+	return 0;
 }
 
 static int jffs2_dynrubin_decompress(unsigned char *data_in,
@@ -399,7 +399,7 @@ static int jffs2_dynrubin_decompress(unsigned char *data_in,
 		bits[c] = data_in[c];
 
 	rubin_do_decompress(256, bits, data_in+8, cpage_out, sourcelen-8, dstlen);
-        return 0;
+	return 0;
 }
 
 static struct jffs2_compressor jffs2_rubinmips_comp = {
diff --git a/fs/jffs2/compr_zlib.c b/fs/jffs2/compr_zlib.c
index 2b87fcc..cfd301a 100644
--- a/fs/jffs2/compr_zlib.c
+++ b/fs/jffs2/compr_zlib.c
@@ -181,7 +181,7 @@ static int jffs2_zlib_decompress(unsigned char *data_in,
 	}
 	zlib_inflateEnd(&inf_strm);
 	mutex_unlock(&inflate_mutex);
-        return 0;
+	return 0;
 }
 
 static struct jffs2_compressor jffs2_zlib_comp = {
@@ -203,11 +203,11 @@ int __init jffs2_zlib_init(void)
 
     ret = alloc_workspaces();
     if (ret)
-        return ret;
+	    return ret;
 
     ret = jffs2_register_compressor(&jffs2_zlib_comp);
     if (ret)
-        free_workspaces();
+	    free_workspaces();
 
     return ret;
 }
diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
index c1dfca3..d293a1f 100644
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -32,7 +32,7 @@ static int jffs2_mkdir (struct inode *,struct dentry *,int);
 static int jffs2_rmdir (struct inode *,struct dentry *);
 static int jffs2_mknod (struct inode *,struct dentry *,int,dev_t);
 static int jffs2_rename (struct inode *, struct dentry *,
-                        struct inode *, struct dentry *);
+			 struct inode *, struct dentry *);
 
 const struct file_operations jffs2_dir_operations =
 {
@@ -770,7 +770,7 @@ static int jffs2_mknod (struct inode *dir_i, struct dentry *dentry, int mode, de
 }
 
 static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
-                        struct inode *new_dir_i, struct dentry *new_dentry)
+			 struct inode *new_dir_i, struct dentry *new_dentry)
 {
 	int ret;
 	struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb);
diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c
index 66e7c2f..efd83f3 100644
--- a/fs/jffs2/erase.c
+++ b/fs/jffs2/erase.c
@@ -38,8 +38,8 @@ static void jffs2_erase_block(struct jffs2_sb_info *c,
 #ifdef __ECOS
        ret = jffs2_flash_erase(c, jeb);
        if (!ret) {
-               jffs2_erase_succeeded(c, jeb);
-               return;
+	       jffs2_erase_succeeded(c, jeb);
+	       return;
        }
        bad_offset = jeb->offset;
 #else /* Linux */
@@ -50,12 +50,14 @@ static void jffs2_erase_block(struct jffs2_sb_info *c,
 	instr = kmalloc(sizeof(struct erase_info) + sizeof(struct erase_priv_struct), GFP_KERNEL);
 	if (!instr) {
 		printk(KERN_WARNING "kmalloc for struct erase_info in jffs2_erase_block failed. Refiling block for later\n");
+		down(&c->erase_free_sem);
 		spin_lock(&c->erase_completion_lock);
 		list_move(&jeb->list, &c->erase_pending_list);
 		c->erasing_size -= c->sector_size;
 		c->dirty_size += c->sector_size;
 		jeb->dirty_size = c->sector_size;
 		spin_unlock(&c->erase_completion_lock);
+		up(&c->erase_free_sem);
 		return;
 	}
 
@@ -82,12 +84,14 @@ static void jffs2_erase_block(struct jffs2_sb_info *c,
 	if (ret == -ENOMEM || ret == -EAGAIN) {
 		/* Erase failed immediately. Refile it on the list */
 		D1(printk(KERN_DEBUG "Erase at 0x%08x failed: %d. Refiling on erase_pending_list\n", jeb->offset, ret));
+		down(&c->erase_free_sem);
 		spin_lock(&c->erase_completion_lock);
 		list_move(&jeb->list, &c->erase_pending_list);
 		c->erasing_size -= c->sector_size;
 		c->dirty_size += c->sector_size;
 		jeb->dirty_size = c->sector_size;
 		spin_unlock(&c->erase_completion_lock);
+		up(&c->erase_free_sem);
 		return;
 	}
 
@@ -114,6 +118,7 @@ void jffs2_erase_pending_blocks(struct jffs2_sb_info *c, int count)
 			jeb = list_entry(c->erase_complete_list.next, struct jffs2_eraseblock, list);
 			list_del(&jeb->list);
 			spin_unlock(&c->erase_completion_lock);
+			up(&c->erase_free_sem);
 			jffs2_mark_erased_block(c, jeb);
 
 			if (!--count) {
@@ -134,6 +139,7 @@ void jffs2_erase_pending_blocks(struct jffs2_sb_info *c, int count)
 			jffs2_free_jeb_node_refs(c, jeb);
 			list_add(&jeb->list, &c->erasing_list);
 			spin_unlock(&c->erase_completion_lock);
+			up(&c->erase_free_sem);
 
 			jffs2_erase_block(c, jeb);
 
@@ -142,23 +148,25 @@ void jffs2_erase_pending_blocks(struct jffs2_sb_info *c, int count)
 		}
 
 		/* Be nice */
-		cond_resched();
+		yield();
+		down(&c->erase_free_sem);
 		spin_lock(&c->erase_completion_lock);
 	}
 
 	spin_unlock(&c->erase_completion_lock);
+	up(&c->erase_free_sem);
  done:
 	D1(printk(KERN_DEBUG "jffs2_erase_pending_blocks completed\n"));
-
-	up(&c->erase_free_sem);
 }
 
 static void jffs2_erase_succeeded(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb)
 {
 	D1(printk(KERN_DEBUG "Erase completed successfully at 0x%08x\n", jeb->offset));
+	down(&c->erase_free_sem);
 	spin_lock(&c->erase_completion_lock);
 	list_move_tail(&jeb->list, &c->erase_complete_list);
 	spin_unlock(&c->erase_completion_lock);
+	up(&c->erase_free_sem);
 	/* Ensure that kupdated calls us again to mark them clean */
 	jffs2_erase_pending_trigger(c);
 }
@@ -172,22 +180,26 @@ static void jffs2_erase_failed(struct jffs2_sb_info *c, struct jffs2_eraseblock
 		   failed too many times. */
 		if (!jffs2_write_nand_badblock(c, jeb, bad_offset)) {
 			/* We'd like to give this block another try. */
+			down(&c->erase_free_sem);
 			spin_lock(&c->erase_completion_lock);
 			list_move(&jeb->list, &c->erase_pending_list);
 			c->erasing_size -= c->sector_size;
 			c->dirty_size += c->sector_size;
 			jeb->dirty_size = c->sector_size;
 			spin_unlock(&c->erase_completion_lock);
+			up(&c->erase_free_sem);
 			return;
 		}
 	}
 
+	down(&c->erase_free_sem);
 	spin_lock(&c->erase_completion_lock);
 	c->erasing_size -= c->sector_size;
 	c->bad_size += c->sector_size;
 	list_move(&jeb->list, &c->bad_list);
 	c->nr_erasing_blocks--;
 	spin_unlock(&c->erase_completion_lock);
+	up(&c->erase_free_sem);
 	wake_up(&c->erase_wait);
 }
 
@@ -317,6 +329,33 @@ static int jffs2_block_check_erase(struct jffs2_sb_info *c, struct jffs2_erasebl
 	size_t retlen;
 	int ret = -EIO;
 
+	if (c->mtd->point) {
+		unsigned long *wordebuf;
+
+		ret = c->mtd->point(c->mtd, jeb->offset, c->sector_size, &retlen, (unsigned char **)&ebuf);
+		if (ret) {
+			D1(printk(KERN_DEBUG "MTD point failed %d\n", ret));
+			goto do_flash_read;
+		}
+		if (retlen < c->sector_size) {
+			/* Don't muck about if it won't let us point to the whole erase sector */
+			D1(printk(KERN_DEBUG "MTD point returned len too short: 0x%zx\n", retlen));
+			c->mtd->unpoint(c->mtd, ebuf, jeb->offset, c->sector_size);
+			goto do_flash_read;
+		}
+		wordebuf = ebuf-sizeof(*wordebuf);
+		retlen /= sizeof(*wordebuf);
+		do {
+		   if (*++wordebuf != ~0)
+			   break;
+		} while(--retlen);
+		c->mtd->unpoint(c->mtd, ebuf, jeb->offset, c->sector_size);
+		if (retlen)
+			printk(KERN_WARNING "Newly-erased block contained word 0x%lx at offset 0x%08x\n",
+			       *wordebuf, jeb->offset + c->sector_size-retlen*sizeof(*wordebuf));
+		return 0;
+	}
+ do_flash_read:
 	ebuf = kmalloc(PAGE_SIZE, GFP_KERNEL);
 	if (!ebuf) {
 		printk(KERN_WARNING "Failed to allocate page buffer for verifying erase at 0x%08x. Refiling\n", jeb->offset);
@@ -417,6 +456,7 @@ static void jffs2_mark_erased_block(struct jffs2_sb_info *c, struct jffs2_eraseb
 		jffs2_link_node_ref(c, jeb, jeb->offset | REF_NORMAL, c->cleanmarker_size, NULL);
 	}
 
+	down(&c->erase_free_sem);
 	spin_lock(&c->erase_completion_lock);
 	c->erasing_size -= c->sector_size;
 	c->free_size += jeb->free_size;
@@ -429,23 +469,28 @@ static void jffs2_mark_erased_block(struct jffs2_sb_info *c, struct jffs2_eraseb
 	c->nr_erasing_blocks--;
 	c->nr_free_blocks++;
 	spin_unlock(&c->erase_completion_lock);
+	up(&c->erase_free_sem);
 	wake_up(&c->erase_wait);
 	return;
 
 filebad:
+	down(&c->erase_free_sem);
 	spin_lock(&c->erase_completion_lock);
 	/* Stick it on a list (any list) so erase_failed can take it
 	   right off again.  Silly, but shouldn't happen often. */
 	list_add(&jeb->list, &c->erasing_list);
 	spin_unlock(&c->erase_completion_lock);
+	up(&c->erase_free_sem);
 	jffs2_erase_failed(c, jeb, bad_offset);
 	return;
 
 refile:
 	/* Stick it back on the list from whence it came and come back later */
 	jffs2_erase_pending_trigger(c);
+	down(&c->erase_free_sem);
 	spin_lock(&c->erase_completion_lock);
 	list_add(&jeb->list, &c->erase_complete_list);
 	spin_unlock(&c->erase_completion_lock);
+	up(&c->erase_free_sem);
 	return;
 }
diff --git a/fs/jffs2/gc.c b/fs/jffs2/gc.c
index 2d99e06..eded819 100644
--- a/fs/jffs2/gc.c
+++ b/fs/jffs2/gc.c
@@ -556,7 +556,7 @@ static int jffs2_garbage_collect_pristine(struct jffs2_sb_info *c,
 
 	node = kmalloc(rawlen, GFP_KERNEL);
 	if (!node)
-               return -ENOMEM;
+		return -ENOMEM;
 
 	ret = jffs2_flash_read(c, ref_offset(raw), rawlen, &retlen, (char *)node);
 	if (!ret && retlen != rawlen)
@@ -624,7 +624,7 @@ static int jffs2_garbage_collect_pristine(struct jffs2_sb_info *c,
 
 	if (ret || (retlen != rawlen)) {
 		printk(KERN_NOTICE "Write of %d bytes at 0x%08x failed. returned %d, retlen %zd\n",
-                       rawlen, phys_ofs, ret, retlen);
+		       rawlen, phys_ofs, ret, retlen);
 		if (retlen) {
 			jffs2_add_physical_node_ref(c, phys_ofs | REF_OBSOLETE, rawlen, NULL);
 		} else {
diff --git a/fs/jffs2/jffs2_fs_sb.h b/fs/jffs2/jffs2_fs_sb.h
index b13298a..ae99cd7 100644
--- a/fs/jffs2/jffs2_fs_sb.h
+++ b/fs/jffs2/jffs2_fs_sb.h
@@ -106,6 +106,9 @@ struct jffs2_sb_info {
 
 	uint32_t wbuf_pagesize; /* 0 for NOR and other flashes with no wbuf */
 
+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
+	unsigned char *wbuf_verify; /* read-back buffer for verification */
+#endif
 #ifdef CONFIG_JFFS2_FS_WRITEBUFFER
 	unsigned char *wbuf; /* Write-behind buffer for NAND flash */
 	uint32_t wbuf_ofs;
diff --git a/fs/jffs2/nodelist.h b/fs/jffs2/nodelist.h
index bc5509f..8b4955a 100644
--- a/fs/jffs2/nodelist.h
+++ b/fs/jffs2/nodelist.h
@@ -127,7 +127,7 @@ static inline struct jffs2_inode_cache *jffs2_raw_ref_to_ic(struct jffs2_raw_nod
 	return ((struct jffs2_inode_cache *)raw);
 }
 
-        /* flash_offset & 3 always has to be zero, because nodes are
+	/* flash_offset & 3 always has to be zero, because nodes are
 	   always aligned at 4 bytes. So we have a couple of extra bits
 	   to play with, which indicate the node's status; see below: */
 #define REF_UNCHECKED	0	/* We haven't yet checked the CRC or built its inode */
@@ -197,7 +197,7 @@ struct jffs2_inode_cache {
 #define RAWNODE_CLASS_XATTR_DATUM	1
 #define RAWNODE_CLASS_XATTR_REF		2
 
-#define INOCACHE_HASHSIZE 128
+#define INOCACHE_HASHSIZE 1024
 
 #define write_ofs(c) ((c)->nextblock->offset + (c)->sector_size - (c)->nextblock->free_size)
 
diff --git a/fs/jffs2/nodemgmt.c b/fs/jffs2/nodemgmt.c
index dbc908a..5b49bff 100644
--- a/fs/jffs2/nodemgmt.c
+++ b/fs/jffs2/nodemgmt.c
@@ -154,7 +154,7 @@ int jffs2_reserve_space_gc(struct jffs2_sb_info *c, uint32_t minsize,
 	while(ret == -EAGAIN) {
 		ret = jffs2_do_reserve_space(c, minsize, len, sumsize);
 		if (ret) {
-		        D1(printk(KERN_DEBUG "jffs2_reserve_space_gc: looping, ret is %d\n", ret));
+			D1(printk(KERN_DEBUG "jffs2_reserve_space_gc: looping, ret is %d\n", ret));
 		}
 	}
 	spin_unlock(&c->erase_completion_lock);
@@ -423,7 +423,12 @@ struct jffs2_raw_node_ref *jffs2_add_physical_node_ref(struct jffs2_sb_info *c,
 	   even after refiling c->nextblock */
 	if ((c->nextblock || ((ofs & 3) != REF_OBSOLETE))
 	    && (jeb != c->nextblock || (ofs & ~3) != jeb->offset + (c->sector_size - jeb->free_size))) {
-		printk(KERN_WARNING "argh. node added in wrong place\n");
+		printk(KERN_WARNING "argh. node added in wrong place at 0x%08x(%d)\n", ofs & ~3, ofs & 3);
+		if (c->nextblock)
+			printk(KERN_WARNING "nextblock 0x%08x", c->nextblock->offset);
+		else
+			printk(KERN_WARNING "No nextblock");
+		printk(", expected at %08x\n", jeb->offset + (c->sector_size - jeb->free_size));
 		return ERR_PTR(-EINVAL);
 	}
 #endif
diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c
index b5baa35..8d4319c 100644
--- a/fs/jffs2/readinode.c
+++ b/fs/jffs2/readinode.c
@@ -211,7 +211,7 @@ static void jffs2_kill_tn(struct jffs2_sb_info *c, struct jffs2_tmp_dnode_info *
  * ordering.
  *
  * Returns 0 if the node was handled (including marking it obsolete)
- *         < 0 an if error occurred
+ *	 < 0 an if error occurred
  */
 static int jffs2_add_tn_to_tree(struct jffs2_sb_info *c,
 				struct jffs2_readinode_info *rii,
@@ -862,8 +862,8 @@ static inline int read_unknown(struct jffs2_sb_info *c, struct jffs2_raw_node_re
 		JFFS2_ERROR("REF_UNCHECKED but unknown node at %#08x\n",
 			    ref_offset(ref));
 		JFFS2_ERROR("Node is {%04x,%04x,%08x,%08x}. Please report this error.\n",
-                            je16_to_cpu(un->magic), je16_to_cpu(un->nodetype),
-                            je32_to_cpu(un->totlen), je32_to_cpu(un->hdr_crc));
+			    je16_to_cpu(un->magic), je16_to_cpu(un->nodetype),
+			    je32_to_cpu(un->totlen), je32_to_cpu(un->hdr_crc));
 		jffs2_mark_node_obsolete(c, ref);
 		return 0;
 	}
diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c
index 6c75cd4..59dd408 100644
--- a/fs/jffs2/scan.c
+++ b/fs/jffs2/scan.c
@@ -863,7 +863,7 @@ scan_more:
 			switch (je16_to_cpu(node->nodetype) & JFFS2_COMPAT_MASK) {
 			case JFFS2_FEATURE_ROCOMPAT:
 				printk(KERN_NOTICE "Read-only compatible feature node (0x%04x) found at offset 0x%08x\n", je16_to_cpu(node->nodetype), ofs);
-			        c->flags |= JFFS2_SB_FLAG_RO;
+				c->flags |= JFFS2_SB_FLAG_RO;
 				if (!(jffs2_is_readonly(c)))
 					return -EROFS;
 				if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(node->totlen)))))
diff --git a/fs/jffs2/security.c b/fs/jffs2/security.c
index bc9f6ba..02c39c6 100644
--- a/fs/jffs2/security.c
+++ b/fs/jffs2/security.c
@@ -38,9 +38,9 @@ int jffs2_init_security(struct inode *inode, struct inode *dir)
 	}
 	rc = do_jffs2_setxattr(inode, JFFS2_XPREFIX_SECURITY, name, value, len, 0);
 
-        kfree(name);
-        kfree(value);
-        return rc;
+	kfree(name);
+	kfree(value);
+	return rc;
 }
 
 /* ---- XATTR Handler for "security.*" ----------------- */
diff --git a/fs/jffs2/summary.c b/fs/jffs2/summary.c
index d828b29..2a77d3f 100644
--- a/fs/jffs2/summary.c
+++ b/fs/jffs2/summary.c
@@ -2,10 +2,10 @@
  * JFFS2 -- Journalling Flash File System, Version 2.
  *
  * Copyright © 2004  Ferenc Havasi <havasi@inf.u-szeged.hu>,
- *                   Zoltan Sogor <weth@inf.u-szeged.hu>,
- *                   Patrik Kluba <pajko@halom.u-szeged.hu>,
- *                   University of Szeged, Hungary
- *             2006  KaiGai Kohei <kaigai@ak.jp.nec.com>
+ *		     Zoltan Sogor <weth@inf.u-szeged.hu>,
+ *		     Patrik Kluba <pajko@halom.u-szeged.hu>,
+ *		     University of Szeged, Hungary
+ *	       2006  KaiGai Kohei <kaigai@ak.jp.nec.com>
  *
  * For licensing information, see the file 'LICENCE' in this directory.
  *
diff --git a/fs/jffs2/summary.h b/fs/jffs2/summary.h
index 0c6669e..8bf34f2 100644
--- a/fs/jffs2/summary.h
+++ b/fs/jffs2/summary.h
@@ -2,9 +2,9 @@
  * JFFS2 -- Journalling Flash File System, Version 2.
  *
  * Copyright © 2004  Ferenc Havasi <havasi@inf.u-szeged.hu>,
- *                   Zoltan Sogor <weth@inf.u-szeged.hu>,
- *                   Patrik Kluba <pajko@halom.u-szeged.hu>,
- *                   University of Szeged, Hungary
+ *		     Zoltan Sogor <weth@inf.u-szeged.hu>,
+ *		     Patrik Kluba <pajko@halom.u-szeged.hu>,
+ *		     University of Szeged, Hungary
  *
  * For licensing information, see the file 'LICENCE' in this directory.
  *
diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c
index 91d1d0f..d1d4f27 100644
--- a/fs/jffs2/wbuf.c
+++ b/fs/jffs2/wbuf.c
@@ -220,6 +220,47 @@ static struct jffs2_raw_node_ref **jffs2_incore_replace_raw(struct jffs2_sb_info
 	return NULL;
 }
 
+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
+static int jffs2_verify_write(struct jffs2_sb_info *c, unsigned char *buf,
+			      uint32_t ofs)
+{
+	int ret;
+	size_t retlen;
+	char *eccstr;
+
+	ret = c->mtd->read(c->mtd, ofs, c->wbuf_pagesize, &retlen, c->wbuf_verify);
+	if (ret && ret != -EUCLEAN && ret != -EBADMSG) {
+		printk(KERN_WARNING "jffs2_verify_write(): Read back of page at %08x failed: %d\n", c->wbuf_ofs, ret);
+		return ret;
+	} else if (retlen != c->wbuf_pagesize) {
+		printk(KERN_WARNING "jffs2_verify_write(): Read back of page at %08x gave short read: %zd not %d.\n", ofs, retlen, c->wbuf_pagesize);
+		return -EIO;
+	}
+	if (!memcmp(buf, c->wbuf_verify, c->wbuf_pagesize))
+		return 0;
+
+	if (ret == -EUCLEAN)
+		eccstr = "corrected";
+	else if (ret == -EBADMSG)
+		eccstr = "correction failed";
+	else
+		eccstr = "OK or unused";
+
+	printk(KERN_WARNING "Write verify error (ECC %s) at %08x. Wrote:\n",
+	       eccstr, c->wbuf_ofs);
+	print_hex_dump(KERN_WARNING, "", DUMP_PREFIX_OFFSET, 16, 1,
+		       c->wbuf, c->wbuf_pagesize, 0);
+
+	printk(KERN_WARNING "Read back:\n");
+	print_hex_dump(KERN_WARNING, "", DUMP_PREFIX_OFFSET, 16, 1,
+		       c->wbuf_verify, c->wbuf_pagesize, 0);
+
+	return -EIO;
+}
+#else
+#define jffs2_verify_write(c,b,o) (0)
+#endif
+
 /* Recover from failure to write wbuf. Recover the nodes up to the
  * wbuf, not the one which we were starting to try to write. */
 
@@ -380,7 +421,7 @@ static void jffs2_wbuf_recover(struct jffs2_sb_info *c)
 			ret = c->mtd->write(c->mtd, ofs, towrite, &retlen,
 					    rewrite_buf);
 
-		if (ret || retlen != towrite) {
+		if (ret || retlen != towrite || jffs2_verify_write(c, rewrite_buf, ofs)) {
 			/* Argh. We tried. Really we did. */
 			printk(KERN_CRIT "Recovery of wbuf failed due to a second write error\n");
 			kfree(buf);
@@ -587,15 +628,16 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad)
 
 		ret = c->mtd->write(c->mtd, c->wbuf_ofs, c->wbuf_pagesize, &retlen, c->wbuf);
 
-	if (ret || retlen != c->wbuf_pagesize) {
-		if (ret)
-			printk(KERN_WARNING "jffs2_flush_wbuf(): Write failed with %d\n",ret);
-		else {
-			printk(KERN_WARNING "jffs2_flush_wbuf(): Write was short: %zd instead of %d\n",
-				retlen, c->wbuf_pagesize);
-			ret = -EIO;
-		}
-
+	if (ret) {
+		printk(KERN_WARNING "jffs2_flush_wbuf(): Write failed with %d\n", ret);
+		goto wfail;
+	} else if (retlen != c->wbuf_pagesize) {
+		printk(KERN_WARNING "jffs2_flush_wbuf(): Write was short: %zd instead of %d\n",
+		       retlen, c->wbuf_pagesize);
+		ret = -EIO;
+		goto wfail;
+	} else if ((ret = jffs2_verify_write(c, c->wbuf, c->wbuf_ofs))) {
+	wfail:
 		jffs2_wbuf_recover(c);
 
 		return ret;
@@ -966,8 +1008,8 @@ exit:
 
 #define NR_OOB_SCAN_PAGES 4
 
-/* For historical reasons we use only 12 bytes for OOB clean marker */
-#define OOB_CM_SIZE 12
+/* For historical reasons we use only 8 bytes for OOB clean marker */
+#define OOB_CM_SIZE 8
 
 static const struct jffs2_unknown_node oob_cleanmarker =
 {
@@ -1021,8 +1063,8 @@ int jffs2_check_oob_empty(struct jffs2_sb_info *c,
 /*
  * Check for a valid cleanmarker.
  * Returns: 0 if a valid cleanmarker was found
- *          1 if no cleanmarker was found
- *          negative error code if an error occurred
+ *	    1 if no cleanmarker was found
+ *	    negative error code if an error occurred
  */
 int jffs2_check_nand_cleanmarker(struct jffs2_sb_info *c,
 				 struct jffs2_eraseblock *jeb)
@@ -1138,11 +1180,22 @@ int jffs2_nand_flash_setup(struct jffs2_sb_info *c)
 		return -ENOMEM;
 	}
 
+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
+	c->wbuf_verify = kmalloc(c->wbuf_pagesize, GFP_KERNEL);
+	if (!c->wbuf_verify) {
+		kfree(c->oobbuf);
+		kfree(c->wbuf);
+		return -ENOMEM;
+	}
+#endif
 	return 0;
 }
 
 void jffs2_nand_flash_cleanup(struct jffs2_sb_info *c)
 {
+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
+	kfree(c->wbuf_verify);
+#endif
 	kfree(c->wbuf);
 	kfree(c->oobbuf);
 }
diff --git a/fs/jffs2/xattr.h b/fs/jffs2/xattr.h
index 3b0ff29..6e3b5dd 100644
--- a/fs/jffs2/xattr.h
+++ b/fs/jffs2/xattr.h
@@ -75,7 +75,7 @@ extern void jffs2_build_xattr_subsystem(struct jffs2_sb_info *c);
 extern void jffs2_clear_xattr_subsystem(struct jffs2_sb_info *c);
 
 extern struct jffs2_xattr_datum *jffs2_setup_xattr_datum(struct jffs2_sb_info *c,
-                                                  uint32_t xid, uint32_t version);
+							 uint32_t xid, uint32_t version);
 
 extern void jffs2_xattr_delete_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic);
 extern void jffs2_xattr_free_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic);
diff --git a/fs/jffs2/xattr_user.c b/fs/jffs2/xattr_user.c
index 40942bc..8bbeab9 100644
--- a/fs/jffs2/xattr_user.c
+++ b/fs/jffs2/xattr_user.c
@@ -17,7 +17,7 @@
 #include "nodelist.h"
 
 static int jffs2_user_getxattr(struct inode *inode, const char *name,
-                               void *buffer, size_t size)
+			       void *buffer, size_t size)
 {
 	if (!strcmp(name, ""))
 		return -EINVAL;
@@ -25,7 +25,7 @@ static int jffs2_user_getxattr(struct inode *inode, const char *name,
 }
 
 static int jffs2_user_setxattr(struct inode *inode, const char *name, const void *buffer,
-                               size_t size, int flags)
+			       size_t size, int flags)
 {
 	if (!strcmp(name, ""))
 		return -EINVAL;
diff --git a/fs/promfs/Makefile b/fs/promfs/Makefile
new file mode 100644
index 0000000..940a51b
--- /dev/null
+++ b/fs/promfs/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_PROMFS_FS) += promfs.o
diff --git a/fs/promfs/promfs.c b/fs/promfs/promfs.c
new file mode 100644
index 0000000..9fb2bfa
--- /dev/null
+++ b/fs/promfs/promfs.c
@@ -0,0 +1,295 @@
+/*
+ * promfs.c - generic inode/dentry functions for IEEE 1275-based filesystems.
+ *
+ * This is based heavily upon prior ieee1275 and other virtual filesystems
+ * implementations; openpromfs, proc_devtree.c, oprofilefs, procfs, ...
+ * 
+ * Copyright (C) 2007 Andres Salomon <dilinger@debian.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pagemap.h>
+#include <linux/fs.h>
+//#include <linux/promfs.h>
+#include <asm/prom.h>
+
+#define PROMFS_MAGIC 0x1f2f3fff
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andres Salomon");
+
+struct promfs_inode
+{
+	struct inode ino;
+	struct property *prop;
+};
+
+static inline struct promfs_inode *to_promfs_inode(struct inode *inode)
+{
+	return container_of(inode, struct promfs_inode, ino);
+}
+
+#if 0
+static DEFINE_SPINLOCK(promfs_lock);
+
+static struct of_node *of_tree = NULL;
+static DEFINE_RWLOCK(of_tree_lock);
+
+void __init of_build_tree(void)
+{
+
+
+}
+#endif
+
+static int promfs_open_file(struct inode *inode, struct file *file)
+{
+	struct promfs_inode *ino;
+
+	ino = to_promfs_inode(inode);
+	if (!ino->prop)
+		return -EIO;
+	file->private_data = ino->prop;
+
+	return 0;
+}
+
+static ssize_t promfs_read_file(struct file *file, char __user *data,
+		size_t len, loff_t *ppos)
+{
+	struct property *prop = (struct property *) file->private_data;
+	return simple_read_from_buffer(data, len, ppos, prop->value,
+			prop->length);
+}
+
+static ssize_t promfs_write_file(struct file *file, char const __user *buf,
+		size_t count, loff_t * offset)
+{
+	/* TODO.... 'cause, y'know, it would be nice. */
+	return -EIO;
+}
+
+static struct file_operations promfs_file_ops = {
+	.open = promfs_open_file,
+	.read = promfs_read_file,
+	.write = promfs_write_file,
+};
+
+static struct kmem_cache *promfs_inode_cachep;
+
+static struct inode *promfs_alloc_inode(struct super_block *sb)
+{
+	struct promfs_inode *pr_ino;
+
+	pr_ino = kmem_cache_alloc(promfs_inode_cachep, GFP_KERNEL);
+	if (!pr_ino)
+		return NULL;
+	pr_ino->prop = NULL;
+
+	return &pr_ino->ino;
+}
+
+static void promfs_destroy_inode(struct inode *inode)
+{
+	kmem_cache_free(promfs_inode_cachep, to_promfs_inode(inode));
+}
+
+static void promfs_read_inode(struct inode *inode)
+{
+	inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
+}
+
+static int promfs_remount(struct super_block *sb, int *flags, char *data)
+{
+	*flags |= MS_NOATIME;
+	return 0;
+}
+
+static struct super_operations promfs_s_ops = {
+	.alloc_inode = promfs_alloc_inode,
+	.destroy_inode = promfs_destroy_inode,
+	.read_inode = promfs_read_inode,
+	.statfs = simple_statfs,
+	.drop_inode = generic_delete_inode,
+	.remount_fs = promfs_remount,
+};
+
+static struct inode *promfs_get_inode(struct super_block *sb, int mode)
+{
+	struct inode *inode = new_inode(sb);
+
+	if (inode) {
+		inode->i_mode = mode;
+		inode->i_uid = 0;
+		inode->i_gid = 0;
+		inode->i_blocks = 0;
+		inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+	}
+
+	return inode;
+}
+
+static int promfs_create_file(struct super_block *sb, struct dentry *root,
+		struct property *prop, const struct file_operations *fops)
+{
+	struct dentry *dentry;
+	struct inode *inode;
+	struct promfs_inode *ino;
+
+	dentry = d_alloc_name(root, prop->name);
+	if (!dentry)
+		goto err;
+
+	inode = promfs_get_inode(sb, S_IFREG | 0644);
+	if (!inode)
+		goto err_dput;
+	inode->i_fop = fops;
+	ino = to_promfs_inode(inode);
+	ino->prop = prop;
+	d_add(dentry, inode);
+
+	return 0;
+
+err_dput:
+	dput(dentry);
+err:
+	return -EFAULT;
+}
+
+struct dentry *promfs_create_dir(struct super_block *sb, struct dentry *root,
+		char const *name)
+{
+	struct dentry *dentry;
+	struct inode *inode;
+
+	dentry = d_alloc_name(root, name);
+	if (!dentry)
+		goto err;
+
+	inode = promfs_get_inode(sb, S_IFDIR | 0755);
+	if (!inode)
+		goto err_dput;
+	inode->i_op = &simple_dir_inode_operations;
+	inode->i_fop = &simple_dir_operations;
+	d_add(dentry, inode);
+	return dentry;
+
+err_dput:
+	dput(dentry);
+err:
+	return NULL;
+}
+
+void promfs_populate(struct super_block *sb, struct dentry *root,
+		struct device_node *node)
+{
+	struct dentry *dentry;
+	struct device_node *child;
+	struct property *prop;
+
+	if (!node)
+		return;
+
+	for (child = node->child; child; child = child->sibling) {
+		dentry = promfs_create_dir(sb, root, child->path_component_name);
+		promfs_populate(sb, dentry, child);
+	}
+	for (prop = node->properties; prop; prop = prop->next)
+		promfs_create_file(sb, root, prop, &promfs_file_ops);
+}
+
+static int promfs_fill_super(struct super_block *sb, void *data, int silent)
+{
+	struct inode *root_inode;
+	struct dentry *root_dentry;
+	struct promfs_inode *inode;
+
+	sb->s_blocksize = PAGE_CACHE_SIZE;
+	sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
+	sb->s_magic = PROMFS_MAGIC;
+	sb->s_op = &promfs_s_ops;
+	sb->s_time_gran = 1;
+	sb->s_flags |= MS_NOATIME;
+
+	root_inode = promfs_get_inode(sb, S_IFDIR | 0755);
+	if (!root_inode)
+		goto err;
+	root_inode->i_op = &simple_dir_inode_operations;
+	root_inode->i_fop = &simple_dir_operations;
+
+	inode = to_promfs_inode(root_inode);
+
+	root_dentry = d_alloc_root(root_inode);
+	if (!root_dentry)
+		goto err_iput;
+	sb->s_root = root_dentry;
+
+	promfs_populate(sb, root_dentry, of_find_node_by_path("/"));
+	return 0;
+
+err_iput:
+	iput(root_inode);
+err:
+	return -ENOMEM;
+}
+
+static int promfs_get_sb(struct file_system_type *fs_type, int flags,
+		const char *dev_name, void *data, struct vfsmount *mnt)
+{
+	return get_sb_single(fs_type, flags, data, promfs_fill_super, mnt);
+}
+
+static struct file_system_type promfs_fs_type = {
+	.owner = THIS_MODULE,
+	.name = "promfs",
+	.get_sb = promfs_get_sb,
+	.kill_sb = kill_litter_super,
+};
+
+static void init_once(void *i, struct kmem_cache *cachep, unsigned long fl)
+{
+	struct promfs_inode *inode = (struct promfs_inode *) i;
+	inode_init_once(&inode->ino);
+}
+
+static int __init init_promfs(void)
+{
+	int err;
+
+	prom_build_devicetree();
+	promfs_inode_cachep = kmem_cache_create("promfs_inode_cache",
+			sizeof(struct promfs_inode), 0,
+			SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD, init_once, NULL);
+	if (!promfs_inode_cachep)
+		return -ENOMEM;
+
+	err = register_filesystem(&promfs_fs_type);
+	if (err)
+		kmem_cache_destroy(promfs_inode_cachep);
+		
+	return err;
+}
+
+static void __exit exit_promfs(void)
+{
+	unregister_filesystem(&promfs_fs_type);
+	kmem_cache_destroy(promfs_inode_cachep);
+}
+
+module_init(init_promfs);
+module_exit(exit_promfs);
diff --git a/include/asm-i386/geode.h b/include/asm-i386/geode.h
index 6da4bbb..f18ebe2 100644
--- a/include/asm-i386/geode.h
+++ b/include/asm-i386/geode.h
@@ -135,6 +135,55 @@ static inline void geode_gpio_event_pme(unsigned int gpio, int pair)
 	geode_gpio_setup_event(gpio, pair, 1);
 }
 
+/* MFGPT */
+
+#define MFGPT_TIMER_ANY -1
+
+#define MFGPT_DOMAIN_WORKING 1
+#define MFGPT_DOMAIN_STANDBY 2
+#define MFGPT_DOMAIN_ANY (MFGPT_DOMAIN_WORKING | MFGPT_DOMAIN_STANDBY)
+
+#define MFGPT_CMP1 0
+#define MFGPT_CMP2 1
+
+#define MFGPT_EVENT_IRQ   0
+#define MFGPT_EVENT_NMI   1
+#define MFGPT_EVENT_RESET 3
+
+#define MFGPT_REG_CMP1    0
+#define MFGPT_REG_CMP2    2
+#define MFGPT_REG_COUNTER 4
+#define MFGPT_REG_SETUP   6
+
+#define MFGPT_SETUP_CNTEN  (1 << 15)
+#define MFGPT_SETUP_CMP2   (1 << 14)
+#define MFGPT_SETUP_CMP1   (1 << 13)
+#define MFGPT_SETUP_SETUP  (1 << 12)
+#define MFGPT_SETUP_STOPEN (1 << 11)
+#define MFGPT_SETUP_EXTEN  (1 << 10)
+#define MFGPT_SETUP_REVEN  (1 << 5)
+#define MFGPT_SETUP_CLKSEL (1 << 4)
+
+static inline void geode_mfgpt_write(int timer, u16 reg, u16 value)
+{
+	u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
+	outw(value, base + reg + (timer * 8));
+}
+
+static inline u16 geode_mfgpt_read(int timer, u16 reg)
+{
+	u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
+	return inw(base + reg + (timer * 8));
+}
+
+extern int __init geode_mfgpt_detect(void);
+extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable);
+extern int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable);
+extern int geode_mfgpt_alloc_timer(int timer, int domain, struct module *owner);
+
+#define geode_mfgpt_setup_irq(t,c,i) geode_mfgpt_set_irq((t),(c),(i),1)
+#define geode_mfgpt_release_irq(t,c,i) geode_mfgpt_set_irq((t),(c),(i),0)
+
 /* Specific geode tests */
 
 static inline int is_geode_gx(void)
diff --git a/include/asm-i386/ofw.h b/include/asm-i386/ofw.h
new file mode 100644
index 0000000..79b08b1
--- /dev/null
+++ b/include/asm-i386/ofw.h
@@ -0,0 +1,16 @@
+/*
+ * Definitions for Open Firmware client interface on 32-bit system.
+ * OF Cell size is 4. Integer properties are encoded big endian,
+ * as with all OF implementations.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _OFW_H
+#define _OFW_H
+
+extern int ofw(char *, int, int, ...); 
+
+#endif
diff --git a/include/asm-i386/olpc.h b/include/asm-i386/olpc.h
new file mode 100644
index 0000000..26bc1a8
--- /dev/null
+++ b/include/asm-i386/olpc.h
@@ -0,0 +1,116 @@
+/* OLPC machine specific definitions */
+
+#ifndef ASM_OLPC_H_
+#define ASM_OLPC_H_
+
+#include <asm/geode.h>
+
+struct olpc_platform_t {
+	int flags;
+	int boardrev;
+	int ecver;
+};
+
+#define OLPC_F_PRESENT 0x01
+#define OLPC_F_DCON    0x02
+#define OLPC_F_VSA     0x04
+
+enum
+{
+	OLPC_REV_A = 0,
+
+	OLPC_REV_PRE_B1,
+	OLPC_REV_B1,
+	OLPC_REV_PRE_B2,
+	OLPC_REV_B2,
+	OLPC_REV_PRE_B3,
+	OLPC_REV_B3,
+	OLPC_REV_B4,
+	OLPC_REV_C1,
+	OLPC_REV_R1,
+	OLPC_REV_UNKNOWN	/* this should always come last */
+};
+
+#ifndef CONFIG_OLPC
+
+static inline int machine_is_olpc(void) { return 0; }
+static inline int olpc_has_dcon(void) { return 0; }
+static inline int olpc_has_vsa(void) { return 0; }
+static inline int olpc_get_rev(void) { return OLPC_REV_UNKNOWN; }
+
+#else
+
+extern struct olpc_platform_t olpc_platform_info;
+
+static inline int
+machine_is_olpc(void)
+{
+	return (olpc_platform_info.flags & OLPC_F_PRESENT) ? 1 : 0;
+}
+
+static inline int
+olpc_has_dcon(void)
+{
+	return (olpc_platform_info.flags & OLPC_F_DCON) ? 1 : 0;
+}
+
+static inline int
+olpc_has_vsa(void)
+{
+	return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0;
+}
+
+static inline int
+olpc_get_rev(void)
+{
+	return olpc_platform_info.boardrev;
+}
+
+static inline int
+olpc_rev_after(int rev)
+{
+	return olpc_platform_info.boardrev > rev &&
+			olpc_platform_info.boardrev != OLPC_REV_UNKNOWN;
+}
+
+static inline int
+olpc_rev_before(int rev)
+{
+	return olpc_platform_info.boardrev < rev ||
+			olpc_platform_info.boardrev == OLPC_REV_UNKNOWN;
+}
+
+#endif
+
+/* EC functions */
+
+int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
+		unsigned char *outbuf, size_t outlen);
+
+void olpc_register_battery_callback(void (*f)(unsigned long));
+void olpc_deregister_battery_callback(void);
+
+/* EC commands and responses */
+
+/* SCI source values */
+
+#define EC_SCI_SRC_EMPTY   0x00
+#define EC_SCI_SRC_GAME    0x01
+#define EC_SCI_SRC_BATTERY 0x02
+#define EC_SCI_SRC_BATSOC  0x04
+#define EC_SCI_SRC_BATERR  0x08
+#define EC_SCI_SRC_EBOOK   0x10
+#define EC_SCI_SRC_WLAN    0x20
+#define EC_SCI_SRC_ACPWR   0x40
+
+/* GPIO assignments */
+
+#define OLPC_GPIO_MIC_AC      1
+#define OLPC_GPIO_DCON_IRQ    7
+#define OLPC_GPIO_THRM_ALRM  10
+#define OLPC_GPIO_WORKAUX    24
+#define OLPC_GPIO_LID        26
+#define OLPC_GPIO_ECSCI      27
+
+#endif
+
diff --git a/include/asm-i386/prom.h b/include/asm-i386/prom.h
new file mode 100644
index 0000000..59d3bdd
--- /dev/null
+++ b/include/asm-i386/prom.h
@@ -0,0 +1,108 @@
+#ifndef _I386_PROM_H
+#define _I386_PROM_H
+#ifdef __KERNEL__
+
+
+/*
+ * Definitions for talking to the Open Firmware PROM on
+ * Power Macintosh computers.
+ *
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
+ * Updates for SPARC64 by David S. Miller
+ * Updates for i386/OLPC by Andres Salomon
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <asm/atomic.h>
+
+typedef u32 phandle;
+typedef u32 ihandle;
+
+struct property {
+	char	*name;
+	int	length;
+	void	*value;
+	struct property *next;
+};
+
+struct device_node {
+	const char	*name;
+	const char	*type;
+	phandle	node;
+//        phandle linux_phandle;
+	char	*path_component_name;
+	char	*full_name;
+
+	struct	property *properties;
+	struct  property *deadprops; /* removed properties */
+	struct	device_node *parent;
+	struct	device_node *child;
+	struct	device_node *sibling;
+	struct	device_node *next;	/* next device of same type */
+	struct	device_node *allnext;	/* next in list of all nodes */
+	struct  proc_dir_entry *pde;	/* this node's proc directory */
+	struct  kref kref;
+	unsigned long _flags;
+	void	*data;
+};
+
+/* flag descriptions */
+#define OF_DYNAMIC 1 /* node and properties were allocated via kmalloc */
+
+#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
+#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
+
+#define OF_BAD_ADDR	((u64)-1)
+
+static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de)
+{
+	dn->pde = de;
+}
+
+extern struct device_node *of_find_node_by_name(struct device_node *from,
+	const char *name);
+#define for_each_node_by_name(dn, name) \
+	for (dn = of_find_node_by_name(NULL, name); dn; \
+	     dn = of_find_node_by_name(dn, name))
+extern struct device_node *of_find_node_by_type(struct device_node *from,
+	const char *type);
+#define for_each_node_by_type(dn, type) \
+	for (dn = of_find_node_by_type(NULL, type); dn; \
+	     dn = of_find_node_by_type(dn, type))
+extern struct device_node *of_find_compatible_node(struct device_node *from,
+	const char *type, const char *compat);
+extern struct device_node *of_find_node_by_path(const char *path);
+extern struct device_node *of_find_node_by_phandle(phandle handle);
+extern struct device_node *of_get_parent(const struct device_node *node);
+extern struct device_node *of_get_next_child(const struct device_node *node,
+					     struct device_node *prev);
+extern struct property *of_find_property(const struct device_node *np,
+					 const char *name,
+					 int *lenp);
+//extern struct device_node *of_node_get(struct device_node *node);
+//extern void of_node_put(struct device_node *node);
+extern int of_device_is_compatible(const struct device_node *device,
+				   const char *);
+extern const void *of_get_property(const struct device_node *node,
+			     const char *name,
+			     int *lenp);
+#define get_property(node,name,lenp) of_get_property(node,name,lenp)
+extern int of_set_property(struct device_node *node, const char *name, void *val, int len);
+extern int of_getintprop_default(struct device_node *np,
+				 const char *name,
+				 int def);
+extern int of_n_addr_cells(struct device_node *np);
+extern int of_n_size_cells(struct device_node *np);
+
+extern void prom_build_devicetree(void);
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/asm-i386/setup.h b/include/asm-i386/setup.h
index 7862fe8..d7146c0 100644
--- a/include/asm-i386/setup.h
+++ b/include/asm-i386/setup.h
@@ -24,6 +24,7 @@
 #define OLD_CL_BASE_ADDR	0x90000
 #define OLD_CL_OFFSET		0x90022
 #define NEW_CL_POINTER		0x228	/* Relative to real mode data */
+#define OFW_INFO_OFFSET		0xb0 	/* Relative to real mode data */
 
 #ifndef __ASSEMBLY__
 
diff --git a/include/linux/battery.h b/include/linux/battery.h
new file mode 100644
index 0000000..2f856a0
--- /dev/null
+++ b/include/linux/battery.h
@@ -0,0 +1,101 @@
+/*
+ * Driver model for batteries
+ *
+ *	© 2006 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Based on LED Class support, by John Lenz and Richard Purdie:
+ *
+ *	© 2005 John Lenz <lenz@cs.wisc.edu>
+ *	© 2005-2006 Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __LINUX_BATTERY_H__
+#define __LINUX_BATTERY_H__
+
+struct device;
+struct class_device;
+
+/*
+ * Battery Core
+ */
+#define PWRDEV_TYPE_BATTERY	0
+#define PWRDEV_TYPE_AC		1
+
+#define BAT_STAT_PRESENT	(1<<0)
+#define BAT_STAT_LOW		(1<<1)
+#define BAT_STAT_FULL		(1<<2)
+#define BAT_STAT_CHARGING	(1<<3)
+#define BAT_STAT_DISCHARGING	(1<<4)
+#define BAT_STAT_OVERTEMP	(1<<5)
+#define BAT_STAT_CRITICAL	(1<<6)
+#define BAT_STAT_FIRE		(1<<7)
+#define BAT_STAT_CHARGE_DONE	(1<<8)
+
+/* Thou shalt not export any attributes in sysfs except these, and
+   with these units: */
+#define BAT_INFO_STATUS		"status"		/* Not free-form. Use
+							   provided function */
+#define BAT_INFO_TEMP1		"temp1"			/* °C/1000 */
+#define BAT_INFO_TEMP1_NAME	"temp1_name"		/* string */
+
+#define BAT_INFO_TEMP2		"temp2"			/* °C/1000 */
+#define BAT_INFO_TEMP2_NAME	"temp2_name"		/* string */
+
+#define BAT_INFO_VOLTAGE	"voltage"		/* mV */
+#define BAT_INFO_VOLTAGE_DESIGN	"voltage_design"	/* mV */
+
+#define BAT_INFO_CURRENT	"current"		/* mA */
+#define BAT_INFO_CURRENT_NOW	"current_now"		/* mA */
+
+#define BAT_INFO_POWER		"power"			/* mW */
+#define BAT_INFO_POWER_NOW	"power_now"		/* mW */
+
+/* The following capacity/charge properties are represented in either
+   mA or mW. The CAP_UNITS property MUST be provided if any of these are. */
+#define BAT_INFO_RATE		"rate"			/* CAP_UNITS */
+#define BAT_INFO_CAP_LEFT	"capacity_left"		/* CAP_UNITS*h */
+#define BAT_INFO_CAP_DESIGN	"capacity_design"	/* CAP_UNITS*h */
+#define BAT_INFO_CAP_LAST_FULL	"capacity_last_full"	/* CAP_UNITS*h */
+#define BAT_INFO_CAP_LOW	"capacity_low_thresh"	/* CAP_UNITS*h */
+#define BAT_INFO_CAP_WARN	"capacity_warn_thresh"	/* CAP_UNITS*h */
+#define BAT_INFO_CAP_UNITS	"capacity_units"	/* string: must be
+							   either mA or mW */
+	
+#define BAT_INFO_CAP_PCT	"capacity_percentage"	/* integer */
+
+#define BAT_INFO_TIME_EMPTY	"time_to_empty"		/* seconds */
+#define BAT_INFO_TIME_EMPTY_NOW	"time_to_empty_now"	/* seconds */
+#define BAT_INFO_TIME_FULL	"time_to_full"		/* seconds */
+#define BAT_INFO_TIME_FULL_NOW	"time_to_full_now"	/* seconds */
+
+#define BAT_INFO_MANUFACTURER	"manufacturer"		/* string */
+#define BAT_INFO_TECHNOLOGY	"technology"		/* string */
+#define BAT_INFO_MODEL		"model"			/* string */
+#define BAT_INFO_SERIAL		"serial"		/* string */
+#define BAT_INFO_OEM_INFO	"oem_info"		/* string */
+
+#define BAT_INFO_CYCLE_COUNT	"cycle_count"		/* integer */
+#define BAT_INFO_DATE_MFR	"date_manufactured"	/* YYYY[-MM[-DD]] */
+#define BAT_INFO_DATE_FIRST_USE	"date_first_use"	/* YYYY[-MM[-DD]] */
+
+struct battery_dev {
+	int			status_cap;
+	int			id;
+	int			type;
+	const char		*name;
+
+	struct device		*dev;
+};
+
+int battery_device_register(struct device *parent,
+			    struct battery_dev *battery_cdev);
+void battery_device_unregister(struct battery_dev *battery_cdev);
+
+
+ssize_t battery_attribute_show_status(char *buf, unsigned long status);
+ssize_t battery_attribute_show_ac_status(char *buf, unsigned long status);
+#endif /* __LINUX_BATTERY_H__ */
diff --git a/include/linux/console.h b/include/linux/console.h
index 56a7bcd..1a8b034 100644
--- a/include/linux/console.h
+++ b/include/linux/console.h
@@ -121,14 +121,11 @@ extern void console_stop(struct console *);
 extern void console_start(struct console *);
 extern int is_console_locked(void);
 
-#ifndef CONFIG_DISABLE_CONSOLE_SUSPEND
+extern int serial_console_suspend_enabled;
+
 /* Suspend and resume console messages over PM events */
 extern void suspend_console(void);
 extern void resume_console(void);
-#else
-static inline void suspend_console(void) {}
-static inline void resume_console(void) {}
-#endif /* CONFIG_DISABLE_CONSOLE_SUSPEND */
 
 int mda_console_init(void);
 void prom_con_init(void);
diff --git a/include/linux/fb.h b/include/linux/fb.h
index cec5410..6b59db5 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -664,6 +664,12 @@ struct fb_ops {
 	/* restore saved state */
 	void (*fb_restore_state)(struct fb_info *info);
 
+	/* Shut down the graphics engine to save power */
+	int (*fb_powerdown)(struct fb_info *info);
+
+	/* Power it back up */
+	int (*fb_powerup)(struct fb_info *info);
+
 	/* get capability given var */
 	void (*fb_get_caps)(struct fb_info *info, struct fb_blit_caps *caps,
 			    struct fb_var_screeninfo *var);
@@ -943,6 +949,9 @@ extern int fb_get_color_depth(struct fb_var_screeninfo *var,
 extern int fb_get_options(char *name, char **option);
 extern int fb_new_modelist(struct fb_info *info);
 
+extern int fb_powerdown(struct fb_info *info);
+extern int fb_powerup(struct fb_info *info);
+
 extern struct fb_info *registered_fb[FB_MAX];
 extern int num_registered_fb;
 extern struct class *fb_class;
diff --git a/include/linux/isl_38xx.h b/include/linux/isl_38xx.h
new file mode 100644
index 0000000..c7e98f2
--- /dev/null
+++ b/include/linux/isl_38xx.h
@@ -0,0 +1,127 @@
+/*
+ *  Copyright (C) 2002 Intersil Americas Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _LINUX_ISL_38XX_H
+#define _LINUX_ISL_38XX_H
+
+#include <asm/io.h>
+
+#define ISL38XX_CB_RX_QSIZE                     8
+#define ISL38XX_CB_TX_QSIZE                     32
+
+/* ISL38XX Access Point Specific definitions */
+#define ISL38XX_MAX_WDS_LINKS                   8
+
+/* ISL38xx Client Specific definitions */
+#define ISL38XX_PSM_ACTIVE_STATE                0
+#define ISL38XX_PSM_POWERSAVE_STATE             1
+
+/* ISL38XX Host Interface Definitions */
+#define ISL38XX_PCI_MEM_SIZE                    0x02000
+#define ISL38XX_MEMORY_WINDOW_SIZE              0x01000
+#define ISL38XX_DEV_FIRMWARE_ADDRES             0x20000
+#define ISL38XX_WRITEIO_DELAY                   10	/* in us */
+#define ISL38XX_RESET_DELAY                     50	/* in ms */
+#define ISL38XX_WAIT_CYCLE                      10	/* in 10ms */
+#define ISL38XX_MAX_WAIT_CYCLES                 10
+
+/* PCI Memory Area */
+#define ISL38XX_HARDWARE_REG                    0x0000
+#define ISL38XX_CARDBUS_CIS                     0x0800
+#define ISL38XX_DIRECT_MEM_WIN                  0x1000
+
+/* Hardware registers */
+#define ISL38XX_DEV_INT_REG                     0x0000
+#define ISL38XX_INT_IDENT_REG                   0x0010
+#define ISL38XX_INT_ACK_REG                     0x0014
+#define ISL38XX_INT_EN_REG                      0x0018
+#define ISL38XX_GEN_PURP_COM_REG_1              0x0020
+#define ISL38XX_GEN_PURP_COM_REG_2              0x0024
+#define ISL38XX_CTRL_BLK_BASE_REG               ISL38XX_GEN_PURP_COM_REG_1
+#define ISL38XX_DIR_MEM_BASE_REG                0x0030
+#define ISL38XX_CTRL_STAT_REG                   0x0078
+
+/* High end mobos queue up pci writes, the following
+ * is used to "read" from after a write to force flush */
+#define ISL38XX_PCI_POSTING_FLUSH		ISL38XX_INT_EN_REG
+
+/**
+ * isl38xx_w32_flush - PCI iomem write helper
+ * @base: (host) memory base address of the device
+ * @val: 32bit value (host order) to write
+ * @offset: byte offset into @base to write value to
+ * 
+ *  This helper takes care of writing a 32bit datum to the
+ *  specified offset into the device's pci memory space, and making sure 
+ *  the pci memory buffers get flushed by performing one harmless read 
+ *  from the %ISL38XX_PCI_POSTING_FLUSH offset.
+ */
+static inline void
+isl38xx_w32_flush(void __iomem *base, u32 val, unsigned long offset)
+{
+	writel(val, base + offset);
+	(void) readl(base + ISL38XX_PCI_POSTING_FLUSH);
+}
+
+/* Device Interrupt register bits */
+#define ISL38XX_DEV_INT_RESET                   0x0001
+#define ISL38XX_DEV_INT_UPDATE                  0x0002
+#define ISL38XX_DEV_INT_WAKEUP                  0x0008
+#define ISL38XX_DEV_INT_SLEEP                   0x0010
+#define ISL38XX_DEV_INT_ABORT                   0x0020
+/* thos two only used in USB */
+#define ISL38XX_DEV_INT_DATA                    0x0040
+#define ISL38XX_DEV_INT_MGMT                    0x0080
+
+#define ISL38XX_DEV_INT_PCIUART_CTS             0x4000
+#define ISL38XX_DEV_INT_PCIUART_DR              0x8000
+
+/* Interrupt Identification/Acknowledge/Enable register bits */
+#define ISL38XX_INT_IDENT_UPDATE                0x0002
+#define ISL38XX_INT_IDENT_INIT                  0x0004
+#define ISL38XX_INT_IDENT_WAKEUP                0x0008
+#define ISL38XX_INT_IDENT_SLEEP                 0x0010
+#define ISL38XX_INT_IDENT_PCIUART_CTS           0x4000
+#define ISL38XX_INT_IDENT_PCIUART_DR            0x8000
+
+#define ISL38XX_INT_SOURCES                     (ISL38XX_INT_IDENT_UPDATE | \
+						 ISL38XX_INT_IDENT_INIT | \
+						 ISL38XX_INT_IDENT_WAKEUP | \
+						 ISL38XX_INT_IDENT_SLEEP | \
+						 ISL38XX_INT_IDENT_PCIUART_CTS | \
+						 ISL38XX_INT_IDENT_PCIUART_DR)
+
+/* Control/Status register bits */
+/* Looks like there are other meaningful bits
+    0x20004400 seen in normal operation,
+    0x200044db at 'timeout waiting for mgmt response'
+*/
+#define ISL38XX_CTRL_STAT_SLEEPMODE             0x00000200
+#define	ISL38XX_CTRL_STAT_CLKRUN		0x00800000
+#define ISL38XX_CTRL_STAT_RESET                 0x10000000
+#define ISL38XX_CTRL_STAT_RAMBOOT               0x20000000
+#define ISL38XX_CTRL_STAT_STARTHALTED           0x40000000
+#define ISL38XX_CTRL_STAT_HOST_OVERRIDE         0x80000000
+
+/* Some flags for the isl hardware registers controlling DMA inside the
+ * chip */
+#define ISL38XX_DMA_STATUS_DONE                 0x00000001
+#define ISL38XX_DMA_STATUS_READY                0x00000002
+#define NET2280_EPA_FIFO_PCI_ADDR               0x20000000
+#define ISL38XX_DMA_MASTER_CONTROL_TRIGGER      0x00000004
+
+#endif /* _LINUX_ISL_38XX_H */
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index a56d24a..fd0a260 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -60,6 +60,7 @@ struct onenand_bufferram {
  * @erase_shift:	[INTERN] number of address bits in a block
  * @page_shift:		[INTERN] number of address bits in a page
  * @page_mask:		[INTERN] a page per block mask
+ * @writesize:		[INTERN] a real page size
  * @bufferram_index:	[INTERN] BufferRAM index
  * @bufferram:		[INTERN] BufferRAM info
  * @readw:		[REPLACEABLE] hardware specific function for read short
@@ -100,6 +101,7 @@ struct onenand_chip {
 	unsigned int		erase_shift;
 	unsigned int		page_shift;
 	unsigned int		page_mask;
+	unsigned int		writesize;
 
 	unsigned int		bufferram_index;
 	struct onenand_bufferram	bufferram[MAX_BUFFERRAM];
@@ -140,6 +142,8 @@ struct onenand_chip {
 #define ONENAND_NEXT_BUFFERRAM(this)		(this->bufferram_index ^ 1)
 #define ONENAND_SET_NEXT_BUFFERRAM(this)	(this->bufferram_index ^= 1)
 #define ONENAND_SET_PREV_BUFFERRAM(this)	(this->bufferram_index ^= 1)
+#define ONENAND_SET_BUFFERRAM0(this)		(this->bufferram_index = 0)
+#define ONENAND_SET_BUFFERRAM1(this)		(this->bufferram_index = 1)
 
 #define ONENAND_GET_SYS_CFG1(this)					\
 	(this->read_word(this->base + ONENAND_REG_SYS_CFG1))
@@ -149,6 +153,13 @@ struct onenand_chip {
 #define ONENAND_IS_DDP(this)						\
 	(this->device_id & ONENAND_DEVICE_IS_DDP)
 
+#ifdef CONFIG_MTD_ONENAND_2X_PROGRAM
+#define ONENAND_IS_2PLANE(this)						\
+	(this->options & ONENAND_HAS_2PLANE)
+#else
+#define ONENAND_IS_2PLANE(this)			(0)
+#endif
+
 /* Check byte access in OneNAND */
 #define ONENAND_CHECK_BYTE_ACCESS(addr)		(addr & 0x1)
 
@@ -157,6 +168,7 @@ struct onenand_chip {
  */
 #define ONENAND_HAS_CONT_LOCK		(0x0001)
 #define ONENAND_HAS_UNLOCK_ALL		(0x0002)
+#define ONENAND_HAS_2PLANE		(0x0004)
 #define ONENAND_PAGEBUF_ALLOC		(0x1000)
 #define ONENAND_OOBBUF_ALLOC		(0x2000)
 
diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h
index af94719..c46161f 100644
--- a/include/linux/mtd/onenand_regs.h
+++ b/include/linux/mtd/onenand_regs.h
@@ -74,6 +74,8 @@
 
 #define ONENAND_DEVICE_DENSITY_512Mb	(0x002)
 #define ONENAND_DEVICE_DENSITY_1Gb	(0x003)
+#define ONENAND_DEVICE_DENSITY_2Gb	(0x004)
+#define ONENAND_DEVICE_DENSITY_4Gb	(0x005)
 
 /*
  * Version ID Register F002h (R)
@@ -111,6 +113,8 @@
 #define ONENAND_CMD_READOOB		(0x13)
 #define ONENAND_CMD_PROG		(0x80)
 #define ONENAND_CMD_PROGOOB		(0x1A)
+#define ONENAND_CMD_2X_PROG		(0x7D)
+#define ONENAND_CMD_2X_CACHE_PROG	(0x7F)
 #define ONENAND_CMD_UNLOCK		(0x23)
 #define ONENAND_CMD_LOCK		(0x2A)
 #define ONENAND_CMD_LOCK_TIGHT		(0x2C)
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index 699b7e9..b44facf 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -95,4 +95,23 @@ struct vt_spawn_console {
 };
 extern struct vt_spawn_console vt_spawn_con;
 
+/* A notifier list for console events  */
+extern struct raw_notifier_head console_notifier_list;
+
+/* Called when the FG console switches to KD_TEXT mode */
+#define CONSOLE_EVENT_SWITCH_TEXT 0x01
+
+/* Called when the FG console switches to KD_GRAPHICS mode */
+#define CONSOLE_EVENT_SWITCH_GRAPHICS 0x02
+
+static inline int console_event_register(struct notifier_block *n)
+{
+	return raw_notifier_chain_register(&console_notifier_list, n);
+}
+
+static inline int console_event_unregister(struct notifier_block *n)
+{
+	return raw_notifier_chain_unregister(&console_notifier_list, n);
+}
+
 #endif /* _VT_KERN_H */
diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h
index 246ac23..874a2c8 100644
--- a/include/sound/ac97_codec.h
+++ b/include/sound/ac97_codec.h
@@ -281,10 +281,12 @@
 /* specific - Analog Devices */
 #define AC97_AD_TEST		0x5a	/* test register */
 #define AC97_AD_TEST2		0x5c	/* undocumented test register 2 */
+#define AC97_AD_HPFD_SHIFT	12	/* High Pass Filter Disable */
 #define AC97_AD_CODEC_CFG	0x70	/* codec configuration */
 #define AC97_AD_JACK_SPDIF	0x72	/* Jack Sense & S/PDIF */
 #define AC97_AD_SERIAL_CFG	0x74	/* Serial Configuration */
 #define AC97_AD_MISC		0x76	/* Misc Control Bits */
+#define AC97_AD_VREFD_SHIFT	2	/* V_REFOUT Disable (AD1888) */
 
 /* specific - Cirrus Logic */
 #define AC97_CSR_ACMODE		0x5e	/* AC Mode Register */
diff --git a/kernel/power/console.c b/kernel/power/console.c
index 89bcf49..dca98f5 100644
--- a/kernel/power/console.c
+++ b/kernel/power/console.c
@@ -9,7 +9,7 @@
 #include <linux/console.h>
 #include "power.h"
 
-#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE)
+#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE) && !defined(CONFIG_DISABLE_SUSPEND_VT_SWITCH)
 #define SUSPEND_CONSOLE	(MAX_NR_CONSOLES-1)
 
 static int orig_fgconsole, orig_kmsg;
diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c
index bbed644..090e852 100644
--- a/sound/pci/ac97/ac97_codec.c
+++ b/sound/pci/ac97/ac97_codec.c
@@ -49,7 +49,7 @@ module_param(enable_loopback, bool, 0444);
 MODULE_PARM_DESC(enable_loopback, "Enable AC97 ADC/DAC Loopback Control");
 
 #ifdef CONFIG_SND_AC97_POWER_SAVE
-static int power_save;
+static int power_save = 1;
 module_param(power_save, bool, 0644);
 MODULE_PARM_DESC(power_save, "Enable AC97 power-saving control");
 #endif
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index 581ebba..06637f7 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -1973,8 +1973,9 @@ static const struct snd_kcontrol_new snd_ac97_ad1888_controls[] = {
 		.get = snd_ac97_ad1888_lohpsel_get,
 		.put = snd_ac97_ad1888_lohpsel_put
 	},
-	AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, 2, 1, 1),
-	AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2, 12, 1, 1),
+	AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, AC97_AD_VREFD_SHIFT, 1, 1),
+	AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2,
+			AC97_AD_HPFD_SHIFT, 1, 1),
 	AC97_SINGLE("Spread Front to Surround and Center/LFE", AC97_AD_MISC, 7, 1, 0),
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
diff --git a/sound/pci/cs5535audio/Makefile b/sound/pci/cs5535audio/Makefile
index ad947b4..3866c4d 100644
--- a/sound/pci/cs5535audio/Makefile
+++ b/sound/pci/cs5535audio/Makefile
@@ -8,5 +8,9 @@ ifeq ($(CONFIG_PM),y)
 snd-cs5535audio-objs += cs5535audio_pm.o
 endif
 
+ifdef CONFIG_OLPC
+snd-cs5535audio-objs += cs5535audio_olpc.o
+endif
+
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_CS5535AUDIO) += snd-cs5535audio.o
diff --git a/sound/pci/cs5535audio/cs5535audio.c b/sound/pci/cs5535audio/cs5535audio.c
index b8e75ef..389d9da 100644
--- a/sound/pci/cs5535audio/cs5535audio.c
+++ b/sound/pci/cs5535audio/cs5535audio.c
@@ -145,7 +145,7 @@ static unsigned short snd_cs5535audio_ac97_codec_read(struct snd_ac97 *ac97,
 	return snd_cs5535audio_codec_read(cs5535au, reg);
 }
 
-static int snd_cs5535audio_mixer(struct cs5535audio *cs5535au)
+static int __devinit snd_cs5535audio_mixer(struct cs5535audio *cs5535au)
 {
 	struct snd_card *card = cs5535au->card;
 	struct snd_ac97_bus *pbus;
@@ -160,10 +160,14 @@ static int snd_cs5535audio_mixer(struct cs5535audio *cs5535au)
 		return err;
 
 	memset(&ac97, 0, sizeof(ac97));
-	ac97.scaps = AC97_SCAP_AUDIO|AC97_SCAP_SKIP_MODEM;
+	ac97.scaps = AC97_SCAP_AUDIO | AC97_SCAP_SKIP_MODEM
+			| AC97_SCAP_POWER_SAVE;
 	ac97.private_data = cs5535au;
 	ac97.pci = cs5535au->pci;
 
+	/* olpc_prequirks is dummied out if not olpc */
+	olpc_prequirks(card, &ac97);
+
 	if ((err = snd_ac97_mixer(pbus, &ac97, &cs5535au->ac97)) < 0) {
 		snd_printk(KERN_ERR "mixer failed\n");
 		return err;
@@ -171,6 +175,12 @@ static int snd_cs5535audio_mixer(struct cs5535audio *cs5535au)
 
 	snd_ac97_tune_hardware(cs5535au->ac97, ac97_quirks, ac97_quirk);
 
+	/* olpc_quirks is dummied out if not olpc */
+	if (( err = olpc_quirks(card, cs5535au->ac97)) < 0) {
+		snd_printk(KERN_ERR "olpc quirks failed\n");
+		return err;
+	}
+
 	return 0;
 }
 
@@ -206,7 +216,6 @@ static void process_bm1_irq(struct cs5535audio *cs5535au)
 static irqreturn_t snd_cs5535audio_interrupt(int irq, void *dev_id)
 {
 	u16 acc_irq_stat;
-	u8 bm_stat;
 	unsigned char count;
 	struct cs5535audio *cs5535au = dev_id;
 
@@ -217,7 +226,7 @@ static irqreturn_t snd_cs5535audio_interrupt(int irq, void *dev_id)
 
 	if (!acc_irq_stat)
 		return IRQ_NONE;
-	for (count = 0; count < 10; count++) {
+	for (count = 0; count < 4; count++) {
 		if (acc_irq_stat & (1 << count)) {
 			switch (count) {
 			case IRQ_STS:
@@ -232,26 +241,9 @@ static irqreturn_t snd_cs5535audio_interrupt(int irq, void *dev_id)
 			case BM1_IRQ_STS:
 				process_bm1_irq(cs5535au);
 				break;
-			case BM2_IRQ_STS:
-				bm_stat = cs_readb(cs5535au, ACC_BM2_STATUS);
-				break;
-			case BM3_IRQ_STS:
-				bm_stat = cs_readb(cs5535au, ACC_BM3_STATUS);
-				break;
-			case BM4_IRQ_STS:
-				bm_stat = cs_readb(cs5535au, ACC_BM4_STATUS);
-				break;
-			case BM5_IRQ_STS:
-				bm_stat = cs_readb(cs5535au, ACC_BM5_STATUS);
-				break;
-			case BM6_IRQ_STS:
-				bm_stat = cs_readb(cs5535au, ACC_BM6_STATUS);
-				break;
-			case BM7_IRQ_STS:
-				bm_stat = cs_readb(cs5535au, ACC_BM7_STATUS);
-				break;
 			default:
-				snd_printk(KERN_ERR "Unexpected irq src\n");
+				snd_printk(KERN_ERR "Unexpected irq src: "
+						"0x%x\n", acc_irq_stat);
 				break;
 			}
 		}
diff --git a/sound/pci/cs5535audio/cs5535audio.h b/sound/pci/cs5535audio/cs5535audio.h
index 4fd1f31..ff82f10 100644
--- a/sound/pci/cs5535audio/cs5535audio.h
+++ b/sound/pci/cs5535audio/cs5535audio.h
@@ -16,57 +16,28 @@
 #define ACC_IRQ_STATUS			0x12
 #define ACC_BM0_CMD			0x20
 #define ACC_BM1_CMD			0x28
-#define ACC_BM2_CMD			0x30
-#define ACC_BM3_CMD			0x38
-#define ACC_BM4_CMD			0x40
-#define ACC_BM5_CMD			0x48
-#define ACC_BM6_CMD			0x50
-#define ACC_BM7_CMD			0x58
 #define ACC_BM0_PRD			0x24
 #define ACC_BM1_PRD			0x2C
-#define ACC_BM2_PRD			0x34
-#define ACC_BM3_PRD			0x3C
-#define ACC_BM4_PRD			0x44
-#define ACC_BM5_PRD			0x4C
-#define ACC_BM6_PRD			0x54
-#define ACC_BM7_PRD			0x5C
 #define ACC_BM0_STATUS			0x21
 #define ACC_BM1_STATUS			0x29
-#define ACC_BM2_STATUS			0x31
-#define ACC_BM3_STATUS			0x39
-#define ACC_BM4_STATUS			0x41
-#define ACC_BM5_STATUS			0x49
-#define ACC_BM6_STATUS			0x51
-#define ACC_BM7_STATUS			0x59
 #define ACC_BM0_PNTR			0x60
 #define ACC_BM1_PNTR			0x64
-#define ACC_BM2_PNTR			0x68
-#define ACC_BM3_PNTR			0x6C
-#define ACC_BM4_PNTR			0x70
-#define ACC_BM5_PNTR			0x74
-#define ACC_BM6_PNTR			0x78
-#define ACC_BM7_PNTR			0x7C
+
 /* acc_codec bar0 reg bits */
 /* ACC_IRQ_STATUS */
 #define IRQ_STS 			0
 #define WU_IRQ_STS 			1
 #define BM0_IRQ_STS 			2
 #define BM1_IRQ_STS 			3
-#define BM2_IRQ_STS 			4
-#define BM3_IRQ_STS 			5
-#define BM4_IRQ_STS 			6
-#define BM5_IRQ_STS		 	7
-#define BM6_IRQ_STS 			8
-#define BM7_IRQ_STS 			9
 /* ACC_BMX_STATUS */
 #define EOP				(1<<0)
 #define BM_EOP_ERR			(1<<1)
 /* ACC_BMX_CTL */
-#define BM_CTL_EN			0x00000001
-#define BM_CTL_PAUSE			0x00000011
-#define BM_CTL_DIS			0x00000000
-#define BM_CTL_BYTE_ORD_LE		0x00000000
-#define BM_CTL_BYTE_ORD_BE		0x00000100
+#define BM_CTL_EN			0x01
+#define BM_CTL_PAUSE			0x03
+#define BM_CTL_DIS			0x00
+#define BM_CTL_BYTE_ORD_LE		0x00
+#define BM_CTL_BYTE_ORD_BE		0x04
 /* cs5535 specific ac97 codec register defines */
 #define CMD_MASK			0xFF00FFFF
 #define CMD_NEW				0x00010000
@@ -106,8 +77,8 @@ struct cs5535audio_dma {
 	struct snd_pcm_substream *substream;
 	unsigned int buf_addr, buf_bytes;
 	unsigned int period_bytes, periods;
-	int suspended;
 	u32 saved_prd;
+	int pcm_open_flag;
 };
 
 struct cs5535audio {
@@ -123,8 +94,21 @@ struct cs5535audio {
 	struct cs5535audio_dma dmas[NUM_CS5535AUDIO_DMAS];
 };
 
+#ifdef CONFIG_PM
 int snd_cs5535audio_suspend(struct pci_dev *pci, pm_message_t state);
 int snd_cs5535audio_resume(struct pci_dev *pci);
+#endif
+
+#ifdef CONFIG_OLPC
+void olpc_prequirks(struct snd_card *card, struct snd_ac97_template *ac97) __devinit;
+int olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97) __devinit;
+int olpc_ai_enable(struct snd_ac97 *ac97, u8 val);
+#else
+#define olpc_prequirks(arg,arg2)	do {} while (0)
+#define olpc_quirks(arg,arg2)		(0)
+#define olpc_ai_enable(a, v) (0)
+#endif
+
 int __devinit snd_cs5535audio_pcm(struct cs5535audio *cs5535audio);
 
 #endif /* __SOUND_CS5535AUDIO_H */
diff --git a/sound/pci/cs5535audio/cs5535audio_olpc.c b/sound/pci/cs5535audio/cs5535audio_olpc.c
new file mode 100644
index 0000000..791be73
--- /dev/null
+++ b/sound/pci/cs5535audio/cs5535audio_olpc.c
@@ -0,0 +1,110 @@
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/ac97_codec.h>
+
+#include <asm/olpc.h>
+#include "cs5535audio.h"
+
+/*
+ * OLPC has an additional feature on top of the regular AD1888 codec features.
+ * It has an Analog Input mode that is switched into (after disabling the
+ * High Pass Filter) via GPIO.  It is only supported on B2 and later models.
+ */
+
+int olpc_ai_enable(struct snd_ac97 *ac97, u8 val)
+{
+	int err;
+
+	/*
+	 * update the High Pass Filter (via AC97_AD_TEST2), and then set
+	 * Analog Input mode through a GPIO.
+	 */
+
+	if (val) {
+		err = snd_ac97_update_bits(ac97, AC97_AD_TEST2,
+				1<<AC97_AD_HPFD_SHIFT, 1<<AC97_AD_HPFD_SHIFT);
+		geode_gpio_set(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL);
+	}
+	else {
+		err = snd_ac97_update_bits(ac97, AC97_AD_TEST2,
+				1<<AC97_AD_HPFD_SHIFT, 0);
+		geode_gpio_clear(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL);
+	}
+	if (err < 0)
+		snd_printk(KERN_ERR "Error updating AD_TEST2: %d\n", err);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(olpc_ai_enable);
+
+static int snd_cs5535audio_ai_info(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 1;
+	return 0;
+}
+
+static int snd_cs5535audio_ai_get(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.integer.value[0] = geode_gpio_isset(OLPC_GPIO_MIC_AC,
+			GPIO_OUTPUT_VAL);
+	return 0;
+}
+
+static int snd_cs5535audio_ai_put(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct cs5535audio *cs5535au = snd_kcontrol_chip(kcontrol);
+	struct snd_ac97 *ac97 = cs5535au->ac97;
+
+	olpc_ai_enable(ac97, ucontrol->value.integer.value[0]);
+
+	return 1;
+}
+
+static struct snd_kcontrol_new snd_cs5535audio_controls __devinitdata =
+{
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "DC Mode Enable",
+	.info = snd_cs5535audio_ai_info,
+	.get = snd_cs5535audio_ai_get,
+	.put = snd_cs5535audio_ai_put,
+	.private_value = 0
+};
+
+void __devinit olpc_prequirks(struct snd_card *card,
+		struct snd_ac97_template *ac97)
+{
+	/* Bail if this isn't an OLPC platform */
+	if (!machine_is_olpc())
+		return;
+
+	/* If on an OLPC B3 or higher, invert EAPD. */
+	if (olpc_rev_after(OLPC_REV_B2))
+		ac97->scaps |= AC97_SCAP_INV_EAPD;
+}
+
+int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97)
+{
+	struct snd_ctl_elem_id elem;
+
+	/* Bail if this isn't an OLPC platform */
+	if (!machine_is_olpc())
+		return 0;
+
+	/* drop the original ad1888 HPF control */
+	memset(&elem, 0, sizeof(elem));
+	elem.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+	strcpy(elem.name, "High Pass Filter Enable");
+	snd_ctl_remove_id(card, &elem);
+
+	/* add the override for OLPC's HPF */
+	return snd_ctl_add(card, snd_ctl_new1(&snd_cs5535audio_controls,
+			ac97->private_data));
+}
diff --git a/sound/pci/cs5535audio/cs5535audio_pcm.c b/sound/pci/cs5535audio/cs5535audio_pcm.c
index 5450a9e..d23f8ea 100644
--- a/sound/pci/cs5535audio/cs5535audio_pcm.c
+++ b/sound/pci/cs5535audio/cs5535audio_pcm.c
@@ -164,6 +164,7 @@ static int cs5535audio_build_dma_packets(struct cs5535audio *cs5535au,
 	jmpprd_addr = cpu_to_le32(lastdesc->addr +
 				  (sizeof(struct cs5535audio_dma_desc)*periods));
 
+	dma->substream = substream;
 	dma->period_bytes = period_bytes;
 	dma->periods = periods;
 	spin_lock_irq(&cs5535au->reg_lock);
@@ -241,6 +242,7 @@ static void cs5535audio_clear_dma_packets(struct cs5535audio *cs5535au,
 {
 	snd_dma_free_pages(&dma->desc_buf);
 	dma->desc_buf.area = NULL;
+	dma->substream = NULL;
 }
 
 static int snd_cs5535audio_hw_params(struct snd_pcm_substream *substream,
@@ -260,6 +262,9 @@ static int snd_cs5535audio_hw_params(struct snd_pcm_substream *substream,
 	err = cs5535audio_build_dma_packets(cs5535au, dma, substream,
 					    params_periods(hw_params),
 					    params_period_bytes(hw_params));
+	if (!err)
+		dma->pcm_open_flag = 1;
+
 	return err;
 }
 
@@ -268,6 +273,15 @@ static int snd_cs5535audio_hw_free(struct snd_pcm_substream *substream)
 	struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
 	struct cs5535audio_dma *dma = substream->runtime->private_data;
 
+	if (dma->pcm_open_flag) {
+		if (substream == cs5535au->playback_substream)
+			snd_ac97_update_power(cs5535au->ac97,
+					AC97_PCM_FRONT_DAC_RATE, 0);
+		else
+			snd_ac97_update_power(cs5535au->ac97,
+					AC97_PCM_LR_ADC_RATE, 0);
+		dma->pcm_open_flag = 0;
+	}
 	cs5535audio_clear_dma_packets(cs5535au, dma, substream);
 	return snd_pcm_lib_free_pages(substream);
 }
@@ -298,14 +312,12 @@ static int snd_cs5535audio_trigger(struct snd_pcm_substream *substream, int cmd)
 		break;
 	case SNDRV_PCM_TRIGGER_RESUME:
 		dma->ops->enable_dma(cs5535au);
-		dma->suspended = 0;
 		break;
 	case SNDRV_PCM_TRIGGER_STOP:
 		dma->ops->disable_dma(cs5535au);
 		break;
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 		dma->ops->disable_dma(cs5535au);
-		dma->suspended = 1;
 		break;
 	default:
 		snd_printk(KERN_ERR "unhandled trigger\n");
@@ -344,6 +356,7 @@ static int snd_cs5535audio_capture_open(struct snd_pcm_substream *substream)
 	int err;
 	struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
 	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_ac97 *ac97 = cs5535au->ac97;
 
 	runtime->hw = snd_cs5535audio_capture;
 	cs5535au->capture_substream = substream;
@@ -352,11 +365,29 @@ static int snd_cs5535audio_capture_open(struct snd_pcm_substream *substream)
 	if ((err = snd_pcm_hw_constraint_integer(runtime,
 					 SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
 		return err;
-	return 0;
+
+#ifdef CONFIG_OLPC
+	/* Disable Analog Input */
+	olpc_ai_enable(ac97, 0);
+	/* Enable V_ref bias while recording. */
+	snd_ac97_update_bits(ac97, AC97_AD_MISC, 1<<AC97_AD_VREFD_SHIFT, 0);
+#endif
+	return err;
 }
 
 static int snd_cs5535audio_capture_close(struct snd_pcm_substream *substream)
 {
+#ifdef CONFIG_OLPC
+	struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
+	struct snd_ac97 *ac97 = cs5535au->ac97;
+
+	/* Disable Analog Input */
+	olpc_ai_enable(ac97, 0);
+	/* Disable V_ref bias. */
+	snd_ac97_update_bits(ac97, AC97_AD_MISC, 1<<AC97_AD_VREFD_SHIFT,
+			1<<AC97_AD_VREFD_SHIFT);
+#endif
+
 	return 0;
 }
 
diff --git a/sound/pci/cs5535audio/cs5535audio_pm.c b/sound/pci/cs5535audio/cs5535audio_pm.c
index 3e4d198..838708f 100644
--- a/sound/pci/cs5535audio/cs5535audio_pm.c
+++ b/sound/pci/cs5535audio/cs5535audio_pm.c
@@ -64,18 +64,21 @@ int snd_cs5535audio_suspend(struct pci_dev *pci, pm_message_t state)
 	int i;
 
 	snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
+	snd_pcm_suspend_all(cs5535au->pcm);
+	snd_ac97_suspend(cs5535au->ac97);
 	for (i = 0; i < NUM_CS5535AUDIO_DMAS; i++) {
 		struct cs5535audio_dma *dma = &cs5535au->dmas[i];
-		if (dma && dma->substream && !dma->suspended) 
+		if (dma && dma->substream)
 			dma->saved_prd = dma->ops->read_prd(cs5535au);
 	}
-	snd_pcm_suspend_all(cs5535au->pcm);
-	snd_ac97_suspend(cs5535au->ac97);
 	/* save important regs, then disable aclink in hw */
 	snd_cs5535audio_stop_hardware(cs5535au);
 
+	if (pci_save_state(pci)) {
+		printk(KERN_ERR "cs5535audio: pci_save_state failed!\n");
+		return -EIO;
+	}
 	pci_disable_device(pci);
-	pci_save_state(pci);
 	pci_set_power_state(pci, pci_choose_state(pci, state));
 	return 0;
 }
@@ -89,7 +92,12 @@ int snd_cs5535audio_resume(struct pci_dev *pci)
 	int i;
 
 	pci_set_power_state(pci, PCI_D0);
-	pci_restore_state(pci);
+	if (pci_restore_state(pci) < 0) {
+		printk(KERN_ERR "cs5535audio: pci_restore_state failed, "
+		       "disabling device\n");
+		snd_card_disconnect(card);
+		return -EIO;
+	}
 	if (pci_enable_device(pci) < 0) {
 		printk(KERN_ERR "cs5535audio: pci_enable_device failed, "
 		       "disabling device\n");
@@ -112,17 +120,17 @@ int snd_cs5535audio_resume(struct pci_dev *pci)
 	if (!timeout)
 		snd_printk(KERN_ERR "Failure getting AC Link ready\n");
 
-	/* we depend on ac97 to perform the codec power up */
-	snd_ac97_resume(cs5535au->ac97);
 	/* set up rate regs, dma. actual initiation is done in trig */
 	for (i = 0; i < NUM_CS5535AUDIO_DMAS; i++) {
 		struct cs5535audio_dma *dma = &cs5535au->dmas[i];
-		if (dma && dma->substream && dma->suspended) {
+		if (dma && dma->substream) {
 			dma->substream->ops->prepare(dma->substream);
 			dma->ops->setup_prd(cs5535au, dma->saved_prd);
 		}
 	}
-		
+
+	/* we depend on ac97 to perform the codec power up */
+	snd_ac97_resume(cs5535au->ac97);
 	snd_power_change_state(card, SNDRV_CTL_POWER_D0);
 
 	return 0;