mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-25 10:28:26 +02:00
796a9d1091
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15242 3c298f89-4303-0410-b956-a3cf2f4a3e73
340 lines
7.9 KiB
C
340 lines
7.9 KiB
C
/*
|
|
* BCM47XX support code for some chipcommon facilities (uart, jtagm)
|
|
*
|
|
* Copyright 2007, Broadcom Corporation
|
|
* All Rights Reserved.
|
|
*
|
|
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
|
|
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
|
|
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
|
|
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
#include <typedefs.h>
|
|
#include <bcmdefs.h>
|
|
#include <osl.h>
|
|
#include <sbutils.h>
|
|
#include <bcmdevs.h>
|
|
#include <bcmnvram.h>
|
|
#include <sbconfig.h>
|
|
#include <sbchipc.h>
|
|
#include <sbextif.h>
|
|
#include <hndchipc.h>
|
|
#include <hndcpu.h>
|
|
|
|
/* debug/trace */
|
|
#define CC_ERROR(args)
|
|
|
|
#ifdef BCMDBG
|
|
#define CC_MSG(args) printf args
|
|
#else
|
|
#define CC_MSG(args)
|
|
#endif /* BCMDBG */
|
|
|
|
/* interested chipcommon interrupt source
|
|
* - GPIO
|
|
* - EXTIF
|
|
* - ECI
|
|
* - PMU
|
|
* - UART
|
|
*/
|
|
#define MAX_CC_INT_SOURCE 5
|
|
|
|
/* chipc secondary isr info */
|
|
typedef struct {
|
|
uint intmask; /* int mask */
|
|
cc_isr_fn isr; /* secondary isr handler */
|
|
void *cbdata; /* pointer to private data */
|
|
} cc_isr_info_t;
|
|
|
|
static cc_isr_info_t cc_isr_desc[MAX_CC_INT_SOURCE];
|
|
|
|
/* chip common intmask */
|
|
static uint32 cc_intmask = 0;
|
|
|
|
static bool BCMINITFN(serial_exists) (osl_t * osh, uint8 * regs) {
|
|
uint8 save_mcr, status1;
|
|
|
|
save_mcr = R_REG(osh, ®s[UART_MCR]);
|
|
W_REG(osh, ®s[UART_MCR], UART_MCR_LOOP | 0x0a);
|
|
status1 = R_REG(osh, ®s[UART_MSR]) & 0xf0;
|
|
W_REG(osh, ®s[UART_MCR], save_mcr);
|
|
|
|
return (status1 == 0x90);
|
|
}
|
|
|
|
static void __init sb_extif_serial_init(sb_t * sbh, void *regs,
|
|
sb_serial_init_fn add)
|
|
{
|
|
osl_t *osh = sb_osh(sbh);
|
|
extifregs_t *eir = (extifregs_t *) regs;
|
|
sbconfig_t *sb;
|
|
ulong base;
|
|
uint irq;
|
|
int i, n;
|
|
|
|
/* Determine external UART register base */
|
|
sb = (sbconfig_t *) ((ulong) eir + SBCONFIGOFF);
|
|
base = EXTIF_CFGIF_BASE(sb_base(R_REG(osh, &sb->sbadmatch1)));
|
|
|
|
/* Determine IRQ */
|
|
irq = sb_irq(sbh);
|
|
|
|
/* Disable GPIO interrupt initially */
|
|
W_REG(osh, &eir->gpiointpolarity, 0);
|
|
W_REG(osh, &eir->gpiointmask, 0);
|
|
|
|
/* Search for external UARTs */
|
|
n = 2;
|
|
for (i = 0; i < 2; i++) {
|
|
regs = (void *)REG_MAP(base + (i * 8), 8);
|
|
if (serial_exists(osh, regs)) {
|
|
/* Set GPIO 1 to be the external UART IRQ */
|
|
W_REG(osh, &eir->gpiointmask, 2);
|
|
/* XXXDetermine external UART clock */
|
|
if (add)
|
|
add(regs, irq, 13500000, 0);
|
|
}
|
|
}
|
|
|
|
/* Add internal UART if enabled */
|
|
if (R_REG(osh, &eir->corecontrol) & CC_UE)
|
|
if (add)
|
|
add((void *)&eir->uartdata, irq, sb_clock(sbh), 2);
|
|
}
|
|
|
|
/*
|
|
* Initializes UART access. The callback function will be called once
|
|
* per found UART.
|
|
*/
|
|
void BCMINITFN(sb_serial_init) (sb_t * sbh, sb_serial_init_fn add) {
|
|
osl_t *osh;
|
|
void *regs;
|
|
chipcregs_t *cc;
|
|
uint32 rev, cap, pll, baud_base, div;
|
|
uint irq;
|
|
int i, n;
|
|
|
|
osh = sb_osh(sbh);
|
|
|
|
regs = sb_setcore(sbh, SB_EXTIF, 0);
|
|
if (regs) {
|
|
sb_extif_serial_init(sbh, regs, add);
|
|
return;
|
|
}
|
|
|
|
cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0);
|
|
ASSERT(cc);
|
|
|
|
/* Determine core revision and capabilities */
|
|
rev = sbh->ccrev;
|
|
cap = sbh->cccaps;
|
|
pll = cap & CC_CAP_PLL_MASK;
|
|
|
|
/* Determine IRQ */
|
|
irq = sb_irq(sbh);
|
|
|
|
if (pll == PLL_TYPE1) {
|
|
/* PLL clock */
|
|
baud_base = sb_clock_rate(pll,
|
|
R_REG(osh, &cc->clockcontrol_n),
|
|
R_REG(osh, &cc->clockcontrol_m2));
|
|
div = 1;
|
|
} else {
|
|
/* 5354 chip common uart uses a constant clock
|
|
* frequency of 25MHz */
|
|
if (sb_corerev(sbh) == 20) {
|
|
/* Set the override bit so we don't divide it */
|
|
W_REG(osh, &cc->corecontrol, CC_UARTCLKO);
|
|
baud_base = 25000000;
|
|
} else if (rev >= 11 && rev != 15) {
|
|
/* Fixed ALP clock */
|
|
baud_base = sb_alp_clock(sbh);
|
|
div = 1;
|
|
/* Turn off UART clock before switching clock source */
|
|
if (rev >= 21)
|
|
AND_REG(osh, &cc->corecontrol, ~CC_UARTCLKEN);
|
|
/* Set the override bit so we don't divide it */
|
|
OR_REG(osh, &cc->corecontrol, CC_UARTCLKO);
|
|
if (rev >= 21)
|
|
OR_REG(osh, &cc->corecontrol, CC_UARTCLKEN);
|
|
} else if (rev >= 3) {
|
|
/* Internal backplane clock */
|
|
baud_base = sb_clock(sbh);
|
|
div = 2; /* Minimum divisor */
|
|
W_REG(osh, &cc->clkdiv,
|
|
((R_REG(osh, &cc->clkdiv) & ~CLKD_UART) | div));
|
|
} else {
|
|
/* Fixed internal backplane clock */
|
|
baud_base = 88000000;
|
|
div = 48;
|
|
}
|
|
|
|
/* Clock source depends on strapping if UartClkOverride is unset */
|
|
if ((rev > 0)
|
|
&& ((R_REG(osh, &cc->corecontrol) & CC_UARTCLKO) == 0)) {
|
|
if ((cap & CC_CAP_UCLKSEL) == CC_CAP_UINTCLK) {
|
|
/* Internal divided backplane clock */
|
|
baud_base /= div;
|
|
} else {
|
|
/* Assume external clock of 1.8432 MHz */
|
|
baud_base = 1843200;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Add internal UARTs */
|
|
n = cap & CC_CAP_UARTS_MASK;
|
|
for (i = 0; i < n; i++) {
|
|
/* Register offset changed after revision 0 */
|
|
if (rev)
|
|
regs = (void *)((ulong) & cc->uart0data + (i * 256));
|
|
else
|
|
regs = (void *)((ulong) & cc->uart0data + (i * 8));
|
|
|
|
if (add)
|
|
add(regs, irq, baud_base, 0);
|
|
}
|
|
}
|
|
|
|
#if 0
|
|
/*
|
|
* Initialize jtag master and return handle for
|
|
* jtag_rwreg. Returns NULL on failure.
|
|
*/
|
|
void *sb_jtagm_init(sb_t * sbh, uint clkd, bool exttap)
|
|
{
|
|
void *regs;
|
|
|
|
if ((regs = sb_setcore(sbh, SB_CC, 0)) != NULL) {
|
|
chipcregs_t *cc = (chipcregs_t *) regs;
|
|
uint32 tmp;
|
|
|
|
/*
|
|
* Determine jtagm availability from
|
|
* core revision and capabilities.
|
|
*/
|
|
|
|
/*
|
|
* Corerev 10 has jtagm, but the only chip
|
|
* with it does not have a mips, and
|
|
* the layout of the jtagcmd register is
|
|
* different. We'll only accept >= 11.
|
|
*/
|
|
if (sbh->ccrev < 11)
|
|
return (NULL);
|
|
|
|
if ((sbh->cccaps & CC_CAP_JTAGP) == 0)
|
|
return (NULL);
|
|
|
|
/* Set clock divider if requested */
|
|
if (clkd != 0) {
|
|
tmp = R_REG(osh, &cc->clkdiv);
|
|
tmp =
|
|
(tmp & ~CLKD_JTAG) | ((clkd << CLKD_JTAG_SHIFT) &
|
|
CLKD_JTAG);
|
|
W_REG(osh, &cc->clkdiv, tmp);
|
|
}
|
|
|
|
/* Enable jtagm */
|
|
tmp = JCTRL_EN | (exttap ? JCTRL_EXT_EN : 0);
|
|
W_REG(osh, &cc->jtagctrl, tmp);
|
|
}
|
|
|
|
return (regs);
|
|
}
|
|
|
|
void sb_jtagm_disable(osl_t * osh, void *h)
|
|
{
|
|
chipcregs_t *cc = (chipcregs_t *) h;
|
|
|
|
W_REG(osh, &cc->jtagctrl, R_REG(osh, &cc->jtagctrl) & ~JCTRL_EN);
|
|
}
|
|
|
|
/*
|
|
* Read/write a jtag register. Assumes a target with
|
|
* 8 bit IR and 32 bit DR.
|
|
*/
|
|
#define IRWIDTH 8 /* Default Instruction Register width */
|
|
#define DRWIDTH 32 /* Default Data Register width */
|
|
|
|
uint32 jtag_rwreg(osl_t * osh, void *h, uint32 ir, uint32 dr)
|
|
{
|
|
chipcregs_t *cc = (chipcregs_t *) h;
|
|
uint32 tmp;
|
|
|
|
W_REG(osh, &cc->jtagir, ir);
|
|
W_REG(osh, &cc->jtagdr, dr);
|
|
tmp = JCMD_START | JCMD_ACC_IRDR |
|
|
((IRWIDTH - 1) << JCMD_IRW_SHIFT) | (DRWIDTH - 1);
|
|
W_REG(osh, &cc->jtagcmd, tmp);
|
|
while (((tmp = R_REG(osh, &cc->jtagcmd)) & JCMD_BUSY) == JCMD_BUSY) {
|
|
/* OSL_DELAY(1); */
|
|
}
|
|
|
|
tmp = R_REG(osh, &cc->jtagdr);
|
|
return (tmp);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Interface to register chipc secondary isr
|
|
*/
|
|
bool
|
|
BCMINITFN(sb_cc_register_isr) (sb_t * sbh, cc_isr_fn isr, uint32 ccintmask,
|
|
void *cbdata) {
|
|
bool done = FALSE;
|
|
chipcregs_t *regs;
|
|
uint origidx;
|
|
uint i;
|
|
|
|
/* Save the current core index */
|
|
origidx = sb_coreidx(sbh);
|
|
regs = sb_setcore(sbh, SB_CC, 0);
|
|
ASSERT(regs);
|
|
|
|
for (i = 0; i < MAX_CC_INT_SOURCE; i++) {
|
|
if (cc_isr_desc[i].isr == NULL) {
|
|
cc_isr_desc[i].isr = isr;
|
|
cc_isr_desc[i].cbdata = cbdata;
|
|
cc_isr_desc[i].intmask = ccintmask;
|
|
done = TRUE;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (done) {
|
|
cc_intmask = R_REG(sb_osh(sbh), ®s->intmask);
|
|
cc_intmask |= ccintmask;
|
|
W_REG(sb_osh(sbh), ®s->intmask, cc_intmask);
|
|
}
|
|
|
|
/* restore original coreidx */
|
|
sb_setcoreidx(sbh, origidx);
|
|
return done;
|
|
}
|
|
|
|
/*
|
|
* chipc primary interrupt handler
|
|
*/
|
|
void sb_cc_isr(sb_t * sbh, chipcregs_t * regs)
|
|
{
|
|
uint32 ccintstatus;
|
|
uint32 intstatus;
|
|
uint32 i;
|
|
|
|
/* prior to rev 21 chipc interrupt means uart and gpio */
|
|
if (sbh->ccrev >= 21)
|
|
ccintstatus = R_REG(sb_osh(sbh), ®s->intstatus) & cc_intmask;
|
|
else
|
|
ccintstatus = (CI_UART | CI_GPIO);
|
|
|
|
for (i = 0; i < MAX_CC_INT_SOURCE; i++) {
|
|
if ((cc_isr_desc[i].isr != NULL) &&
|
|
(intstatus = (cc_isr_desc[i].intmask & ccintstatus))) {
|
|
(cc_isr_desc[i].isr) (cc_isr_desc[i].cbdata, intstatus);
|
|
}
|
|
}
|
|
}
|