qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-08 16:41:34 +02:00
Code
90e9add59f
openwrt-xburst/target/linux/danube/files/drivers/char/danube_led.c
blogic 4e2fe59644 danube led cleanup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9734 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-13 21:00:03 +00:00

952 lines
27 KiB
C
Raw Blame History

/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
*
* Copyright (C) 2006 infineon
* Copyright (C) 2007 John Crispin <blogic@openwrt.org>
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/version.h>
#include <linux/types.h>
#include <linux/fs.h>
#include <linux/miscdevice.h>
#include <linux/init.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
#include <linux/errno.h>
#include <asm/danube/danube.h>
#include <asm/danube/port.h>
#include <asm/danube/danube_led.h>
#include <asm/danube/danube_gptu.h>
#define LED_CONFIG 0x01
#define CONFIG_OPERATION_UPDATE_SOURCE 0x0001
#define CONFIG_OPERATION_BLINK 0x0002
#define CONFIG_OPERATION_UPDATE_CLOCK 0x0004
#define CONFIG_OPERATION_STORE_MODE 0x0008
#define CONFIG_OPERATION_SHIFT_CLOCK 0x0010
#define CONFIG_OPERATION_DATA_OFFSET 0x0020
#define CONFIG_OPERATION_NUMBER_OF_LED 0x0040
#define CONFIG_OPERATION_DATA 0x0080
#define CONFIG_OPERATION_MIPS0_ACCESS 0x0100
#define CONFIG_DATA_CLOCK_EDGE 0x0200
/*
* Data Type Used to Call ioctl
*/
struct led_config_param {
unsigned long operation_mask; // Select operations to be performed
unsigned long led; // LED to change update source (LED or ADSL)
unsigned long source; // Corresponding update source (LED or ADSL)
unsigned long blink_mask; // LEDs to set blink mode
unsigned long blink; // Set to blink mode or normal mode
unsigned long update_clock; // Select the source of update clock
unsigned long fpid; // If FPI is the source of update clock, set the divider
// else if GPT is the source, set the frequency
unsigned long store_mode; // Set clock mode or single pulse mode for store signal
unsigned long fpis; // FPI is the source of shift clock, set the divider
unsigned long data_offset; // Set cycles to be inserted before data is transmitted
unsigned long number_of_enabled_led; // Total number of LED to be enabled
unsigned long data_mask; // LEDs to set value
unsigned long data; // Corresponding value
unsigned long mips0_access_mask; // LEDs to set access right
unsigned long mips0_access; // 1: the corresponding data is output from MIPS0, 0: MIPS1
unsigned long f_data_clock_on_rising; // 1: data clock on rising edge, 0: data clock on falling edge
};
extern int danube_led_set_blink(unsigned int, unsigned int);
extern int danube_led_set_data(unsigned int, unsigned int);
extern int danube_led_config(struct led_config_param *);
#define DATA_CLOCKING_EDGE FALLING_EDGE
#define RISING_EDGE 0
#define FALLING_EDGE 1
#define port_reserve_pin danube_port_reserve_pin
#define port_free_pin danube_port_free_pin
#define port_set_altsel0 danube_port_set_altsel0
#define port_clear_altsel0 danube_port_clear_altsel0
#define port_set_altsel1 danube_port_set_altsel1
#define port_clear_altsel1 danube_port_clear_altsel1
#define port_set_dir_out danube_port_set_dir_out
#define port_clear_dir_out danube_port_clear_dir_out
#define port_set_open_drain danube_port_set_open_drain
#define port_clear_open_drain danube_port_clear_open_drain
#define LED_SH_PORT 0
#define LED_SH_PIN 4
#define LED_SH_DIR 1
#define LED_SH_ALTSEL0 1
#define LED_SH_ALTSEL1 0
#define LED_SH_OPENDRAIN 1
#define LED_D_PORT 0
#define LED_D_PIN 5
#define LED_D_DIR 1
#define LED_D_ALTSEL0 1
#define LED_D_ALTSEL1 0
#define LED_D_OPENDRAIN 1
#define LED_ST_PORT 0
#define LED_ST_PIN 6
#define LED_ST_DIR 1
#define LED_ST_ALTSEL0 1
#define LED_ST_ALTSEL1 0
#define LED_ST_OPENDRAIN 1
#define LED_ADSL0_PORT 0
#define LED_ADSL0_PIN 4
#define LED_ADSL0_DIR 1
#define LED_ADSL0_ALTSEL0 0
#define LED_ADSL0_ALTSEL1 1
#define LED_ADSL0_OPENDRAIN 1
#define LED_ADSL1_PORT 0
#define LED_ADSL1_PIN 5
#define LED_ADSL1_DIR 1
#define LED_ADSL1_ALTSEL0 1
#define LED_ADSL1_ALTSEL1 1
#define LED_ADSL1_OPENDRAIN 1
#if (LED_SH_PORT == LED_ADSL0_PORT && LED_SH_PIN == LED_ADSL0_PIN) \
|| (LED_D_PORT == LED_ADSL0_PORT && LED_D_PIN == LED_ADSL0_PIN) \
|| (LED_ST_PORT == LED_ADSL0_PORT && LED_ST_PIN == LED_ADSL0_PIN) \
|| (LED_SH_PORT == LED_ADSL1_PORT && LED_SH_PIN == LED_ADSL1_PIN) \
|| (LED_D_PORT == LED_ADSL1_PORT && LED_D_PIN == LED_ADSL1_PIN) \
|| (LED_ST_PORT == LED_ADSL1_PORT && LED_ST_PIN == LED_ADSL1_PIN)
#define ADSL_LED_IS_EXCLUSIVE 1
#else
#define ADSL_LED_IS_EXCLUSIVE 0
#endif
#if LED_SH_DIR
#define LED_SH_DIR_SETUP port_set_dir_out
#else
#define LED_SH_DIR_SETUP port_clear_dir_out
#endif
#if LED_SH_ALTSEL0
#define LED_SH_ALTSEL0_SETUP port_set_altsel0
#else
#define LED_SH_ALTSEL0_SETUP port_clear_altsel0
#endif
#if LED_SH_ALTSEL1
#define LED_SH_ALTSEL1_SETUP port_set_altsel1
#else
#define LED_SH_ALTSEL1_SETUP port_clear_altsel1
#endif
#if LED_SH_OPENDRAIN
#define LED_SH_OPENDRAIN_SETUP port_set_open_drain
#else
#define LED_SH_OPENDRAIN_SETUP port_clear_open_drain
#endif
#if LED_D_DIR
#define LED_D_DIR_SETUP port_set_dir_out
#else
#define LED_D_DIR_SETUP port_clear_dir_out
#endif
#if LED_D_ALTSEL0
#define LED_D_ALTSEL0_SETUP port_set_altsel0
#else
#define LED_D_ALTSEL0_SETUP port_clear_altsel0
#endif
#if LED_D_ALTSEL1
#define LED_D_ALTSEL1_SETUP port_set_altsel1
#else
#define LED_D_ALTSEL1_SETUP port_clear_altsel1
#endif
#if LED_D_OPENDRAIN
#define LED_D_OPENDRAIN_SETUP port_set_open_drain
#else
#define LED_D_OPENDRAIN_SETUP port_clear_open_drain
#endif
#if LED_ST_DIR
#define LED_ST_DIR_SETUP port_set_dir_out
#else
#define LED_ST_DIR_SETUP port_clear_dir_out
#endif
#if LED_ST_ALTSEL0
#define LED_ST_ALTSEL0_SETUP port_set_altsel0
#else
#define LED_ST_ALTSEL0_SETUP port_clear_altsel0
#endif
#if LED_ST_ALTSEL1
#define LED_ST_ALTSEL1_SETUP port_set_altsel1
#else
#define LED_ST_ALTSEL1_SETUP port_clear_altsel1
#endif
#if LED_ST_OPENDRAIN
#define LED_ST_OPENDRAIN_SETUP port_set_open_drain
#else
#define LED_ST_OPENDRAIN_SETUP port_clear_open_drain
#endif
#if LED_ADSL0_DIR
#define LED_ADSL0_DIR_SETUP port_set_dir_out
#else
#define LED_ADSL0_DIR_SETUP port_clear_dir_out
#endif
#if LED_ADSL0_ALTSEL0
#define LED_ADSL0_ALTSEL0_SETUP port_set_altsel0
#else
#define LED_ADSL0_ALTSEL0_SETUP port_clear_altsel0
#endif
#if LED_ADSL0_ALTSEL1
#define LED_ADSL0_ALTSEL1_SETUP port_set_altsel1
#else
#define LED_ADSL0_ALTSEL1_SETUP port_clear_altsel1
#endif
#if LED_ADSL0_OPENDRAIN
#define LED_ADSL0_OPENDRAIN_SETUP port_set_open_drain
#else
#define LED_ADSL0_OPENDRAIN_SETUP port_clear_open_drain
#endif
#if LED_ADSL1_DIR
#define LED_ADSL1_DIR_SETUP port_set_dir_out
#else
#define LED_ADSL1_DIR_SETUP port_clear_dir_out
#endif
#if LED_ADSL1_ALTSEL0
#define LED_ADSL1_ALTSEL0_SETUP port_set_altsel0
#else
#define LED_ADSL1_ALTSEL0_SETUP port_clear_altsel0
#endif
#if LED_ADSL1_ALTSEL1
#define LED_ADSL1_ALTSEL1_SETUP port_set_altsel1
#else
#define LED_ADSL1_ALTSEL1_SETUP port_clear_altsel1
#endif
#if LED_ADSL1_OPENDRAIN
#define LED_ADSL1_OPENDRAIN_SETUP port_set_open_drain
#else
#define LED_ADSL1_OPENDRAIN_SETUP port_clear_open_drain
#endif
#define SET_BITS(x, msb, lsb, value) (((x) & ~(((1 << ((msb) + 1)) - 1) ^ ((1 << (lsb)) - 1))) | (((value) & ((1 << (1 + (msb) - (lsb))) - 1)) << (lsb)))
static inline int update_led(void);
static inline unsigned int set_update_source(unsigned int, unsigned long, unsigned long);
static inline unsigned int set_blink_in_batch(unsigned int, unsigned long, unsigned long);
static inline unsigned int set_data_clock_edge(unsigned int, unsigned long);
static inline unsigned int set_update_clock(unsigned int, unsigned long, unsigned long);
static inline unsigned int set_store_mode(unsigned int, unsigned long);
static inline unsigned int set_shift_clock(unsigned int, unsigned long);
static inline unsigned int set_data_offset(unsigned int, unsigned long);
static inline unsigned int set_number_of_enabled_led(unsigned int, unsigned long);
static inline unsigned int set_data_in_batch(unsigned int, unsigned long, unsigned long);
static inline unsigned int set_access_right(unsigned int, unsigned long, unsigned long);
static inline void enable_led(void);
static inline void disable_led(void);
static inline int setup_gpio_port(unsigned long);
static inline void release_gpio_port(unsigned long);
static inline int setup_gpt(int, unsigned long);
static inline void release_gpt(int);
static inline int turn_on_led(unsigned long);
static inline void turn_off_led(unsigned long);
static struct semaphore led_sem;
static unsigned long gpt_on = 0;
static unsigned long gpt_freq = 0;
static unsigned long adsl_on = 0;
static unsigned long f_led_on = 0;
static int module_id;
static inline int
update_led (void)
{
int i, j;
/*
* GPT2 or FPID is the clock to update LEDs automatically.
*/
if (readl(DANUBE_LED_CON1) >> 30)
return 0;
/*
* Check the status to prevent conflict of two consecutive update
*/
for ( i = 100000; i != 0; i -= j / 16 )
{
down(&led_sem);
if (!(readl(DANUBE_LED_CON0) & LED_CON0_SWU))
{
*DANUBE_LED_CON0 |= 1 << 31;
up(&led_sem);
return 0;
}
else
up(&led_sem);
for ( j = 0; j < 1000 * 16; j++ );
}
return -EBUSY;
}
static inline unsigned int
set_update_source (unsigned int reg, unsigned long led, unsigned long source)
{
return (reg & ~((led & 0x03) << 24)) | ((source & 0x03) << 24);
}
static inline unsigned int
set_blink_in_batch (unsigned int reg, unsigned long mask, unsigned long blink)
{
return (reg & (~(mask & 0x00FFFFFF) & 0x87FFFFFF)) | (blink & 0x00FFFFFF);
}
static inline unsigned int
set_data_clock_edge (unsigned int reg, unsigned long f_on_rising_edge)
{
return f_on_rising_edge ? (reg & ~(1 << 26)) : (reg | (1 << 26));
}
static inline unsigned int
set_update_clock (unsigned int reg, unsigned long clock, unsigned long fpid)
{
switch ( clock )
{
case 0: reg &= ~0xC0000000; break;
case 1: reg = (reg & ~0xC0000000) | 0x40000000; break;
case 2: reg = (reg & ~0xCF800000) | 0x80000000 | ((fpid & 0x1F) << 23); break;
}
return reg;
}
static inline unsigned int
set_store_mode (unsigned int reg, unsigned long mode)
{
return mode ? (reg | (1 << 28)) : (reg & ~(1 << 28));
}
static inline
unsigned int set_shift_clock (unsigned int reg, unsigned long fpis)
{
return SET_BITS(reg, 21, 20, fpis);
}
static inline
unsigned int set_data_offset (unsigned int reg, unsigned long offset)
{
return SET_BITS(reg, 19, 18, offset);
}
static inline
unsigned int set_number_of_enabled_led (unsigned int reg, unsigned long number)
{
unsigned int bit_mask;
bit_mask = number > 16 ? 0x07 : (number > 8 ? 0x03 : (number ? 0x01 : 0x00));
return (reg & ~0x07) | bit_mask;
}
static inline unsigned int
set_data_in_batch (unsigned int reg, unsigned long mask, unsigned long data)
{
return (reg & ~(mask & 0x00FFFFFF)) | (data & 0x00FFFFFF);
}
static inline unsigned int
set_access_right (unsigned int reg, unsigned long mask, unsigned long ar)
{
return (reg & ~(mask & 0x00FFFFFF)) | (~ar & mask);
}
static inline void
enable_led (void)
{
/* Activate LED module in PMU. */
int i = 1000000;
*(unsigned long *)0xBF10201C &= ~(1 << 11);
while ( --i && (*(unsigned long *)0xBF102020 & (1 << 11)) );
if ( !i )
panic("Activating LED in PMU failed!");
}
static inline void
disable_led (void)
{
*(unsigned long *)0xBF10201C |= 1 << 11;
}
static inline int
setup_gpio_port (unsigned long adsl)
{
int ret = 0;
/*
* Reserve all pins before config them.
*/
if ( adsl )
{
ret |= port_reserve_pin(LED_ADSL0_PORT, LED_ADSL0_PIN, module_id);
ret |= port_reserve_pin(LED_ADSL1_PORT, LED_ADSL1_PIN, module_id);
}
else
{
ret |= port_reserve_pin(LED_ST_PORT, LED_ST_PIN, module_id);
ret |= port_reserve_pin(LED_D_PORT, LED_D_PIN, module_id);
ret |= port_reserve_pin(LED_SH_PORT, LED_SH_PIN, module_id);
}
if ( ret )
{
release_gpio_port(adsl);
return ret; // Should be -EBUSY
}
if ( adsl )
{
LED_ADSL0_ALTSEL0_SETUP(LED_ADSL0_PORT, LED_ADSL0_PIN, module_id);
LED_ADSL0_ALTSEL1_SETUP(LED_ADSL0_PORT, LED_ADSL0_PIN, module_id);
LED_ADSL0_DIR_SETUP(LED_ADSL0_PORT, LED_ADSL0_PIN, module_id);
LED_ADSL0_OPENDRAIN_SETUP(LED_ADSL0_PORT, LED_ADSL0_PIN, module_id);
LED_ADSL1_ALTSEL0_SETUP(LED_ADSL1_PORT, LED_ADSL1_PIN, module_id);
LED_ADSL1_ALTSEL1_SETUP(LED_ADSL1_PORT, LED_ADSL1_PIN, module_id);
LED_ADSL1_DIR_SETUP(LED_ADSL1_PORT, LED_ADSL1_PIN, module_id);
LED_ADSL1_OPENDRAIN_SETUP(LED_ADSL1_PORT, LED_ADSL1_PIN, module_id);
}
else
{
/*
* Set LED_ST
* I don't check the return value, because I'm sure the value is valid
* and the pins are reserved already.
*/
LED_ST_ALTSEL0_SETUP(LED_ST_PORT, LED_ST_PIN, module_id);
LED_ST_ALTSEL1_SETUP(LED_ST_PORT, LED_ST_PIN, module_id);
LED_ST_DIR_SETUP(LED_ST_PORT, LED_ST_PIN, module_id);
LED_ST_OPENDRAIN_SETUP(LED_ST_PORT, LED_ST_PIN, module_id);
/*
* Set LED_D
*/
LED_D_ALTSEL0_SETUP(LED_D_PORT, LED_D_PIN, module_id);
LED_D_ALTSEL1_SETUP(LED_D_PORT, LED_D_PIN, module_id);
LED_D_DIR_SETUP(LED_D_PORT, LED_D_PIN, module_id);
LED_D_OPENDRAIN_SETUP(LED_D_PORT, LED_D_PIN, module_id);
/*
* Set LED_SH
*/
LED_SH_ALTSEL0_SETUP(LED_SH_PORT, LED_SH_PIN, module_id);
LED_SH_ALTSEL1_SETUP(LED_SH_PORT, LED_SH_PIN, module_id);
LED_SH_DIR_SETUP(LED_SH_PORT, LED_SH_PIN, module_id);
LED_SH_OPENDRAIN_SETUP(LED_SH_PORT, LED_SH_PIN, module_id);
}
return 0;
}
static inline void
release_gpio_port (unsigned long adsl)
{
if ( adsl )
{
port_free_pin(LED_ADSL0_PORT, LED_ADSL0_PIN, module_id);
port_free_pin(LED_ADSL1_PORT, LED_ADSL1_PIN, module_id);
}
else
{
port_free_pin(LED_ST_PORT, LED_ST_PIN, module_id);
port_free_pin(LED_D_PORT, LED_D_PIN, module_id);
port_free_pin(LED_SH_PORT, LED_SH_PIN, module_id);
}
}
static inline int
setup_gpt (int timer, unsigned long freq)
{
int ret;
timer = TIMER(timer, 1);
ret = request_timer(timer,
TIMER_FLAG_SYNC
| TIMER_FLAG_16BIT
| TIMER_FLAG_INT_SRC
| TIMER_FLAG_CYCLIC | TIMER_FLAG_COUNTER | TIMER_FLAG_DOWN
| TIMER_FLAG_ANY_EDGE
| TIMER_FLAG_NO_HANDLE,
8000000 / freq,
0,
0);
if ( !ret )
{
ret = start_timer(timer, 0);
if ( ret )
free_timer(timer);
}
return ret;
}
static inline void
release_gpt (int timer)
{
timer = TIMER(timer, 1);
stop_timer(timer);
free_timer(timer);
}
static inline int
turn_on_led (unsigned long adsl)
{
int ret;
ret = setup_gpio_port(adsl);
if ( ret )
return ret;
enable_led();
return 0;
}
static inline void
turn_off_led (unsigned long adsl)
{
release_gpio_port(adsl);
disable_led();
}
int
danube_led_set_blink (unsigned int led, unsigned int blink)
{
unsigned int bit_mask;
if ( led > 23 )
return -EINVAL;
bit_mask = 1 << led;
down(&led_sem);
if ( blink )
*DANUBE_LED_CON0 |= bit_mask;
else
*DANUBE_LED_CON0 &= ~bit_mask;
up(&led_sem);
return (led == 0 && (readl(DANUBE_LED_CON0) & LED_CON0_AD0)) || (led == 1 && (readl(DANUBE_LED_CON0) & LED_CON0_AD1)) ? -EINVAL : 0;
}
int
danube_led_set_data (unsigned int led, unsigned int data)
{
unsigned long f_update;
unsigned int bit_mask;
if ( led > 23 )
return -EINVAL;
bit_mask = 1 << led;
down(&led_sem);
if ( data )
*DANUBE_LED_CPU0 |= bit_mask;
else
*DANUBE_LED_CPU0 &= ~bit_mask;
f_update = !(*DANUBE_LED_AR & bit_mask);
up(&led_sem);
return f_update ? update_led() : 0;
}
int
danube_led_config (struct led_config_param* param)
{
int ret;
unsigned int reg_con0, reg_con1, reg_cpu0, reg_ar;
unsigned int clean_reg_con0, clean_reg_con1, clean_reg_cpu0, clean_reg_ar;
unsigned int f_setup_gpt2;
unsigned int f_software_update;
unsigned int new_led_on, new_adsl_on;
if ( !param )
return -EINVAL;
down(&led_sem);
reg_con0 = *DANUBE_LED_CON0;
reg_con1 = *DANUBE_LED_CON1;
reg_cpu0 = *DANUBE_LED_CPU0;
reg_ar = *DANUBE_LED_AR;
clean_reg_con0 = 1;
clean_reg_con1 = 1;
clean_reg_cpu0 = 1;
clean_reg_ar = 1;
f_setup_gpt2 = 0;
f_software_update = (readl(DANUBE_LED_CON0) & LED_CON0_SWU) ? 0 : 1;
new_led_on = f_led_on;
new_adsl_on = adsl_on;
/* ADSL or LED */
if ( (param->operation_mask & CONFIG_OPERATION_UPDATE_SOURCE) )
{
if ( param->led > 0x03 || param->source > 0x03 )
goto INVALID_PARAM;
clean_reg_con0 = 0;
reg_con0 = set_update_source(reg_con0, param->led, param->source);
#if 0 // ADSL0,1 is source for bit 0, 1 in shift register
new_adsl_on = param->source;
#endif
}
/* Blink */
if ( (param->operation_mask & CONFIG_OPERATION_BLINK) )
{
if ( (param->blink_mask & 0xFF000000) || (param->blink & 0xFF000000) )
goto INVALID_PARAM;
clean_reg_con0 = 0;
reg_con0 = set_blink_in_batch(reg_con0, param->blink_mask, param->blink);
}
/* Edge */
if ( (param->operation_mask & CONFIG_DATA_CLOCK_EDGE) )
{
clean_reg_con0 = 0;
reg_con0 = set_data_clock_edge(reg_con0, param->f_data_clock_on_rising);
}
/* Update Clock */
if ( (param->operation_mask & CONFIG_OPERATION_UPDATE_CLOCK) )
{
if ( param->update_clock > 0x02 || (param->update_clock == 0x02 && param->fpid > 0x3) )
goto INVALID_PARAM;
clean_reg_con1 = 0;
f_software_update = param->update_clock == 0 ? 1 : 0;
if ( param->update_clock == 0x01 )
f_setup_gpt2 = 1;
reg_con1 = set_update_clock(reg_con1, param->update_clock, param->fpid);
}
/* Store Mode */
if ( (param->operation_mask & CONFIG_OPERATION_STORE_MODE) )
{
clean_reg_con1 = 0;
reg_con1 = set_store_mode(reg_con1, param->store_mode);
}
/* Shift Clock */
if ( (param->operation_mask & CONFIG_OPERATION_SHIFT_CLOCK) )
{
if ( param->fpis > 0x03 )
goto INVALID_PARAM;
clean_reg_con1 = 0;
reg_con1 = set_shift_clock(reg_con1, param->fpis);
}
/* Data Offset */
if ( (param->operation_mask & CONFIG_OPERATION_DATA_OFFSET) )
{
if ( param->data_offset > 0x03 )
goto INVALID_PARAM;
clean_reg_con1 = 0;
reg_con1 = set_data_offset(reg_con1, param->data_offset);
}
/* Number of LED */
if ( (param->operation_mask & CONFIG_OPERATION_NUMBER_OF_LED) )
{
if ( param->number_of_enabled_led > 0x24 )
goto INVALID_PARAM;
/*
* If there is at lease one LED enabled, the GPIO pin must be setup.
*/
new_led_on = param->number_of_enabled_led ? 1 : 0;
clean_reg_con1 = 0;
reg_con1 = set_number_of_enabled_led(reg_con1, param->number_of_enabled_led);
}
/* LED Data */
if ( (param->operation_mask & CONFIG_OPERATION_DATA) )
{
if ( (param->data_mask & 0xFF000000) || (param->data & 0xFF000000) )
goto INVALID_PARAM;
clean_reg_cpu0 = 0;
reg_cpu0 = set_data_in_batch(reg_cpu0, param->data_mask, param->data);
if ( f_software_update )
{
clean_reg_con0 = 0;
reg_con0 |= 0x80000000;
}
}
/* Access Right */
if ( (param->operation_mask & CONFIG_OPERATION_MIPS0_ACCESS) )
{
if ( (param->mips0_access_mask & 0xFF000000) || (param->mips0_access & 0xFF000000) )
goto INVALID_PARAM;
clean_reg_ar = 0;
reg_ar = set_access_right(reg_ar, param->mips0_access_mask, param->mips0_access);
}
/* Setup GPT */
if ( f_setup_gpt2 && !new_adsl_on ) // If ADSL led is on, GPT is disabled.
{
ret = 0;
if ( gpt_on )
{
if ( gpt_freq != param->fpid )
{
release_gpt(2);
gpt_on = 0;
ret = setup_gpt(2, param->fpid);
}
}
else
ret = setup_gpt(2, param->fpid);
if ( ret )
{
#if 1
printk("Setup GPT error!\n");
#endif
goto SETUP_GPT_ERROR;
}
else
{
#if 0
printk("Setup GPT successfully!\n");
#endif
gpt_on = 1;
}
}
else
if ( gpt_on )
{
release_gpt(2);
gpt_on = 0;
}
/* Turn on LED */
if ( new_adsl_on )
new_led_on = 1;
if ( !new_led_on || adsl_on != new_adsl_on )
{
turn_off_led(adsl_on);
f_led_on = 0;
adsl_on = 0;
}
if ( !f_led_on && new_led_on )
{
ret = turn_on_led(new_adsl_on);
if ( ret )
{
printk("Setup GPIO error!\n");
goto SETUP_GPIO_ERROR;
}
adsl_on = new_adsl_on;
f_led_on = 1;
}
/* Write Register */
if ( !f_led_on )
enable_led();
if ( !clean_reg_ar )
*DANUBE_LED_AR = reg_ar;
if ( !clean_reg_cpu0 )
*DANUBE_LED_CPU0 = reg_cpu0;
if ( !clean_reg_con1 )
*DANUBE_LED_CON1 = reg_con1;
if ( !clean_reg_con0 )
*DANUBE_LED_CON0 = reg_con0;
if ( !f_led_on )
disable_led();
up(&led_sem);
return 0;
SETUP_GPIO_ERROR:
release_gpt(2);
gpt_on = 0;
SETUP_GPT_ERROR:
up(&led_sem);
return ret;
INVALID_PARAM:
up(&led_sem);
return -EINVAL;
}
static int
led_ioctl (struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
int ret = -EINVAL;
struct led_config_param param;
switch ( cmd )
{
case LED_CONFIG:
copy_from_user(&param, (char*)arg, sizeof(param));
ret = danube_led_config(&param);
break;
}
return ret;
}
static int
led_open (struct inode *inode, struct file *file)
{
return 0;
}
static int
led_release (struct inode *inode, struct file *file)
{
return 0;
}
static struct file_operations led_fops = {
owner: THIS_MODULE,
ioctl: led_ioctl,
open: led_open,
release: led_release
};
static struct miscdevice led_miscdev = {
151,
"led",
&led_fops,
NULL,
NULL,
NULL
};
int __init
danube_led_init (void)
{
int ret = 0;
struct led_config_param param = {0};
enable_led();
writel(0, DANUBE_LED_AR);
writel(0, DANUBE_LED_CPU0);
writel(0, DANUBE_LED_CPU1);
writel(0, DANUBE_LED_CON1);
writel((0x80000000 | (DATA_CLOCKING_EDGE << 26)), DANUBE_LED_CON0);
disable_led();
sema_init(&led_sem, 0);
ret = misc_register(&led_miscdev);
if (ret == -EBUSY)
{
led_miscdev.minor = MISC_DYNAMIC_MINOR;
ret = misc_register(&led_miscdev);
}
if (ret)
{
printk(KERN_ERR "led: can't misc_register\n");
goto out;
} else {
printk(KERN_INFO "led: misc_register on minor = %d\n", led_miscdev.minor);
}
module_id = THIS_MODULE ? (int)THIS_MODULE : ((MISC_MAJOR << 8) | led_miscdev.minor);
up(&led_sem);
/* Add to enable hardware relay */
/* Map for LED on reference board
WLAN_READ LED11 OUT1 15
WARNING LED12 OUT2 14
FXS1_LINK LED13 OUT3 13
FXS2_LINK LED14 OUT4 12
FXO_ACT LED15 OUT5 11
USB_LINK LED16 OUT6 10
ADSL2_LINK LED19 OUT7 9
BT_LINK LED17 OUT8 8
SD_LINK LED20 OUT9 7
ADSL2_TRAFFIC LED31 OUT16 0
Map for hardware relay on reference board
USB Power On OUT11 5
RELAY OUT12 4
*/
param.operation_mask = CONFIG_OPERATION_NUMBER_OF_LED;
param.number_of_enabled_led = 16;
danube_led_config(&param);
param.operation_mask = CONFIG_OPERATION_DATA;
param.data_mask = 1 << 4;
param.data = 1 << 4;
danube_led_config(&param);
// by default, update by FSC clock (FPID)
param.operation_mask = CONFIG_OPERATION_UPDATE_CLOCK;
param.update_clock = 2; // FPID
param.fpid = 3; // 10Hz
danube_led_config(&param);
// source of LED 0, 1 is ADSL
param.operation_mask = CONFIG_OPERATION_UPDATE_SOURCE;
param.led = 3; // LED 0, 1
param.source = 3; // ADSL
danube_led_config(&param);
// turn on USB
param.operation_mask = CONFIG_OPERATION_DATA;
param.data_mask = 1 << 5;
param.data = 1 << 5;
danube_led_config(&param);
out:
return ret;
}
void __exit
danube_led_exit (void)
{
int ret;
ret = misc_deregister(&led_miscdev);
if ( ret )
printk(KERN_ERR "led: can't misc_deregister, get error number %d\n", -ret);
else
printk(KERN_INFO "led: misc_deregister successfully\n");
}
EXPORT_SYMBOL(danube_led_set_blink);
EXPORT_SYMBOL(danube_led_set_data);
EXPORT_SYMBOL(danube_led_config);
module_init(danube_led_init);
module_exit(danube_led_exit);
View Git Blame Copy Permalink