mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-25 08:50:16 +02:00
9d03573661
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18010 3c298f89-4303-0410-b956-a3cf2f4a3e73
195 lines
6.3 KiB
C
195 lines
6.3 KiB
C
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mm.h>
|
|
#include <asm/addrspace.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <ifxmips.h>
|
|
#include <ifxmips_irq.h>
|
|
#include <ifxmips_cgu.h>
|
|
|
|
#define IFXMIPS_PCI_MEM_BASE 0x18000000
|
|
#define IFXMIPS_PCI_MEM_SIZE 0x02000000
|
|
#define IFXMIPS_PCI_IO_BASE 0x1AE00000
|
|
#define IFXMIPS_PCI_IO_SIZE 0x00200000
|
|
|
|
extern int ifxmips_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val);
|
|
extern int ifxmips_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);
|
|
|
|
struct pci_ops ifxmips_pci_ops =
|
|
{
|
|
.read = ifxmips_pci_read_config_dword,
|
|
.write = ifxmips_pci_write_config_dword
|
|
};
|
|
|
|
static struct resource pci_io_resource =
|
|
{
|
|
.name = "io pci IO space",
|
|
.start = IFXMIPS_PCI_IO_BASE,
|
|
.end = IFXMIPS_PCI_IO_BASE + IFXMIPS_PCI_IO_SIZE - 1,
|
|
.flags = IORESOURCE_IO
|
|
};
|
|
|
|
static struct resource pci_mem_resource =
|
|
{
|
|
.name = "ext pci memory space",
|
|
.start = IFXMIPS_PCI_MEM_BASE,
|
|
.end = IFXMIPS_PCI_MEM_BASE + IFXMIPS_PCI_MEM_SIZE - 1,
|
|
.flags = IORESOURCE_MEM
|
|
};
|
|
|
|
static struct pci_controller ifxmips_pci_controller =
|
|
{
|
|
.pci_ops = &ifxmips_pci_ops,
|
|
.mem_resource = &pci_mem_resource,
|
|
.mem_offset = 0x00000000UL,
|
|
.io_resource = &pci_io_resource,
|
|
.io_offset = 0x00000000UL,
|
|
};
|
|
|
|
/* the cpu can can generate the 33Mhz or rely on an external clock the cgu needs the
|
|
proper setting, otherwise the cpu hangs. we have no way of runtime detecting this */
|
|
u32 ifxmips_pci_mapped_cfg;
|
|
int ifxmips_pci_external_clock = 0;
|
|
|
|
static int __init
|
|
ifxmips_pci_set_external_clk(char *str)
|
|
{
|
|
printk("cgu: setting up external pci clock\n");
|
|
ifxmips_pci_external_clock = 1;
|
|
return 1;
|
|
}
|
|
__setup("pci_external_clk", ifxmips_pci_set_external_clk);
|
|
|
|
int
|
|
pcibios_plat_dev_init(struct pci_dev *dev)
|
|
{
|
|
u8 pin;
|
|
|
|
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
|
|
switch(pin)
|
|
{
|
|
case 0:
|
|
break;
|
|
case 1:
|
|
//falling edge level triggered:0x4, low level:0xc, rising edge:0x2
|
|
ifxmips_w32(ifxmips_r32(IFXMIPS_EBU_PCC_CON) | 0xc, IFXMIPS_EBU_PCC_CON);
|
|
ifxmips_w32(ifxmips_r32(IFXMIPS_EBU_PCC_IEN) | 0x10, IFXMIPS_EBU_PCC_IEN);
|
|
break;
|
|
case 2:
|
|
case 3:
|
|
case 4:
|
|
printk ("WARNING: interrupt pin %d not supported yet!\n", pin);
|
|
default:
|
|
printk ("WARNING: invalid interrupt pin %d\n", pin);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void __init
|
|
ifxmips_pci_startup(void)
|
|
{
|
|
u32 temp_buffer;
|
|
|
|
cgu_setup_pci_clk(ifxmips_pci_external_clock);
|
|
|
|
ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OUT) | (1 << 5), IFXMIPS_GPIO_P1_OUT);
|
|
ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OD) | (1 << 5), IFXMIPS_GPIO_P1_OD);
|
|
ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_DIR) | (1 << 5), IFXMIPS_GPIO_P1_DIR);
|
|
ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL1) & ~(1 << 5), IFXMIPS_GPIO_P1_ALTSEL1);
|
|
ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL0) & ~(1 << 5), IFXMIPS_GPIO_P1_ALTSEL0);
|
|
ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_DIR) & ~0x2000, IFXMIPS_GPIO_P1_DIR);
|
|
ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_DIR) | 0x4000, IFXMIPS_GPIO_P1_DIR);
|
|
ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL1) & ~0x6000, IFXMIPS_GPIO_P1_ALTSEL1);
|
|
ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL0) | 0x6000, IFXMIPS_GPIO_P1_ALTSEL0);
|
|
/* enable auto-switching between PCI and EBU */
|
|
ifxmips_w32(0xa, PCI_CR_CLK_CTRL);
|
|
/* busy, i.e. configuration is not done, PCI access has to be retried */
|
|
ifxmips_w32(ifxmips_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD);
|
|
wmb ();
|
|
/* BUS Master/IO/MEM access */
|
|
ifxmips_w32(ifxmips_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD);
|
|
|
|
/* enable external 2 PCI masters */
|
|
temp_buffer = ifxmips_r32(PCI_CR_PC_ARB);
|
|
temp_buffer &= (~(0xf << 16));
|
|
/* enable internal arbiter */
|
|
temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
|
|
/* enable internal PCI master reqest */
|
|
temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
|
|
|
|
/* enable EBU reqest */
|
|
temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS));
|
|
|
|
/* enable all external masters request */
|
|
temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS));
|
|
ifxmips_w32(temp_buffer, PCI_CR_PC_ARB);
|
|
wmb ();
|
|
|
|
ifxmips_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0);
|
|
ifxmips_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1);
|
|
ifxmips_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2);
|
|
ifxmips_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3);
|
|
ifxmips_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4);
|
|
ifxmips_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5);
|
|
ifxmips_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6);
|
|
ifxmips_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7);
|
|
ifxmips_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg);
|
|
ifxmips_w32(0x0e000008, PCI_CR_BAR11MASK);
|
|
ifxmips_w32(0, PCI_CR_PCI_ADDR_MAP11);
|
|
ifxmips_w32(0, PCI_CS_BASE_ADDR1);
|
|
#ifdef CONFIG_SWAP_IO_SPACE
|
|
/* both TX and RX endian swap are enabled */
|
|
ifxmips_w32(ifxmips_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI);
|
|
wmb ();
|
|
#endif
|
|
/*TODO: disable BAR2 & BAR3 - why was this in the origianl infineon code */
|
|
ifxmips_w32(ifxmips_r32(PCI_CR_BAR12MASK) | 0x80000000, PCI_CR_BAR12MASK);
|
|
ifxmips_w32(ifxmips_r32(PCI_CR_BAR13MASK) | 0x80000000, PCI_CR_BAR13MASK);
|
|
/*use 8 dw burst length */
|
|
ifxmips_w32(0x303, PCI_CR_FCI_BURST_LENGTH);
|
|
ifxmips_w32(ifxmips_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD);
|
|
wmb();
|
|
ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OUT) & ~(1 << 5), IFXMIPS_GPIO_P1_OUT);
|
|
wmb();
|
|
mdelay(1);
|
|
ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OUT) | (1 << 5), IFXMIPS_GPIO_P1_OUT);
|
|
}
|
|
|
|
int __init
|
|
pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin){
|
|
switch(slot)
|
|
{
|
|
case 13:
|
|
/* IDSEL = AD29 --> USB Host Controller */
|
|
return (INT_NUM_IM1_IRL0 + 17);
|
|
case 14:
|
|
/* IDSEL = AD30 --> mini PCI connector */
|
|
return (INT_NUM_IM0_IRL0 + 22);
|
|
default:
|
|
printk("Warning: no IRQ found for PCI device in slot %d, pin %d\n", slot, pin);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
int __init
|
|
pcibios_init(void)
|
|
{
|
|
extern int pci_probe_only;
|
|
|
|
pci_probe_only = 0;
|
|
printk("PCI: Probing PCI hardware on host bus 0.\n");
|
|
ifxmips_pci_startup ();
|
|
ifxmips_pci_mapped_cfg = (u32)ioremap_nocache(0x17000000, 0x800 * 16);
|
|
printk("IFXMips PCI mapped to 0x%08lX\n", (unsigned long)ifxmips_pci_mapped_cfg);
|
|
ifxmips_pci_controller.io_map_base = (unsigned long)ioremap(IFXMIPS_PCI_IO_BASE, IFXMIPS_PCI_IO_SIZE - 1);
|
|
printk("IFXMips PCI I/O mapped to 0x%08lX\n", (unsigned long)ifxmips_pci_controller.io_map_base);
|
|
register_pci_controller(&ifxmips_pci_controller);
|
|
return 0;
|
|
}
|
|
|
|
arch_initcall(pcibios_init);
|