1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-09-20 06:36:00 +03:00
openwrt-xburst/target/linux/ar71xx/base-files/etc/uci-defaults/network
juhosg 2b1cf2b32c ar71xx: add support for TP-Link TL-MR3020
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:47 +00:00

164 lines
3.2 KiB
Bash
Executable File

#!/bin/sh
#
# Copyright (C) 2011 OpenWrt.org
#
[ -e /etc/config/network ] && exit 0
touch /etc/config/network
. /lib/functions/uci-defaults.sh
. /lib/ar71xx.sh
ucidef_set_interface_loopback
board=$(ar71xx_board_name)
case "$board" in
all0258n)
ucidef_set_interface_lan "eth0 eth1"
;;
db120)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
;;
dir-825-b1)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "rtl8366s" "1" "1"
ucidef_add_switch_vlan "rtl8366s" "1" "0 1 2 3 5t"
;;
nbg460n_550n_550nh)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "rtl8366s" "1" "1"
ucidef_add_switch_vlan "rtl8366s" "0" "0 1 2 3 5"
;;
rb-433 |\
rb-433u)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "1 2 5"
;;
rb-450)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "eth1" "1" "1"
ucidef_add_switch_vlan "eth1" "1" "0 1 2 3 5"
;;
rb-450g |\
routerstation-pro)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
;;
rb-493g)
ucidef_set_interfaces_lan_wan "eth0 eth1.1" "eth1.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
ucidef_add_switch "switch1" "1" "1"
ucidef_add_switch_vlan "switch1" "1" "0t 1 2 3 4"
ucidef_add_switch_vlan "switch1" "2" "0t 5"
;;
wzr-hp-g300nh2 |\
pb92)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0t 1 3 4 5"
ucidef_add_switch_vlan "eth0" "2" "0t 2"
;;
tl-wa901nd)
ucidef_set_interface_raw "eth" "eth0"
ucidef_set_interface_lan "lan"
;;
tl-wr1043nd)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "rtl8366rb" "1" "1"
ucidef_add_switch_vlan "rtl8366rb" "1" "1 2 3 4 5t"
ucidef_add_switch_vlan "rtl8366rb" "2" "0 5t"
;;
tl-wr841n-v1|\
tl-wr941nd)
ucidef_set_interface_raw "eth" "eth0"
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
;;
wrt160nl)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5"
;;
wzr-hp-g300nh)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
;;
aw-nr580 |\
bullet-m |\
eap7660d |\
rb-411 |\
tl-mr3020 |\
tl-wa901nd-v2 |\
tl-wr703n |\
wp543)
ucidef_set_interface_lan "eth0"
;;
alfa-nx |\
ap83 |\
jwap003 |\
pb42 |\
pb44 |\
routerstation)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
ap121 |\
ap121-mini |\
ap96 |\
airrouter |\
dir-600-a1 |\
dir-615-c1 |\
ja76pf |\
rb750 |\
tew-632brp |\
tl-mr3220 |\
tl-mr3420 |\
tl-wr741nd |\
tl-wr741nd-v4 |\
whr-g301n |\
whr-hp-g300n |\
whr-hp-gn |\
wzr-hp-ag300h)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4"
;;
wzr-hp-g450h)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0t 2 3 4 5"
ucidef_add_switch_vlan "eth0" "2" "0t 1"
;;
*)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
esac
uci commit network
exit 0