qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-22 04:29:01 +02:00
Code
93910ace66
openwrt-xburst/target/linux/xscale-2.6/patches/001-gateway_7001.patch
kaloz 78b10bf7ff add XScale support to -ng 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-08-06 10:42:12 +00:00

164 lines
5.7 KiB
Diff
Raw Blame History

diff -Nur linux-2.6.17/arch/arm/boot/compressed/head-xscale.S linux-2.6.17-owrt/arch/arm/boot/compressed/head-xscale.S
--- linux-2.6.17/arch/arm/boot/compressed/head-xscale.S 2006-06-18 03:49:35.000000000 +0200
+++ linux-2.6.17-owrt/arch/arm/boot/compressed/head-xscale.S 2006-08-05 17:02:21.000000000 +0200
@@ -47,6 +47,11 @@
orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
#endif
+#ifdef CONFIG_MACH_GATEWAY7001
+ mov r7, #(MACH_TYPE_GATEWAY7001 & 0xff)
+ orr r7, r7, #(MACH_TYPE_GATEWAY7001 & 0xff00)
+#endif
+
#ifdef CONFIG_ARCH_IXP2000
mov r1, #-1
mov r0, #0xd6000000
diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/coyote-setup.c linux-2.6.17-owrt/arch/arm/mach-ixp4xx/coyote-setup.c
--- linux-2.6.17/arch/arm/mach-ixp4xx/coyote-setup.c 2006-06-18 03:49:35.000000000 +0200
+++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/coyote-setup.c 2006-08-05 17:02:21.000000000 +0200
@@ -1,9 +1,10 @@
/*
* arch/arm/mach-ixp4xx/coyote-setup.c
*
- * Board setup for ADI Engineering and IXDGP425 boards
+ * Board setup for ADI Engineering, IXDGP425 and Gateway 7001 boards
*
* Copyright (C) 2003-2005 MontaVista Software, Inc.
+ * Copyright (C) 2006 Imre Kaloz <Kaloz@openwrt.org>
*
* Author: Deepak Saxena <dsaxena@plexity.net>
*/
@@ -111,6 +112,19 @@
MACHINE_END
#endif
+#ifdef CONFIG_MACH_GATEWAY7001
+MACHINE_START(GATEWAY7001, "Gateway 7001")
+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .boot_params = 0x0100,
+ .init_machine = coyote_init,
+MACHINE_END
+#endif
+
/*
* IXDPG425 is identical to Coyote except for which serial port
* is connected.
diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/gateway7001-pci.c linux-2.6.17-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c
--- linux-2.6.17/arch/arm/mach-ixp4xx/gateway7001-pci.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c 2006-08-06 10:37:35.000000000 +0200
@@ -0,0 +1,67 @@
+/*
+ * arch/arch/mach-ixp4xx/gateway7001-pci.c
+ *
+ * PCI setup routines for Gateway 7001
+ *
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * based on coyote-pci.c:
+ * Copyright (C) 2002 Jungo Software Technologies.
+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
+ *
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/pci.h>
+
+extern void ixp4xx_pci_preinit(void);
+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
+
+void __init gateway7001_pci_preinit(void)
+{
+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
+
+ ixp4xx_pci_preinit();
+}
+
+static int __init gateway7001_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ if (slot == 0)
+ return IRQ_IXP4XX_GPIO10;
+ else if (slot == 1)
+ return IRQ_IXP4XX_GPIO11;
+ else return -1;
+}
+
+struct hw_pci gateway7001_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = gateway7001_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = ixp4xx_setup,
+ .scan = ixp4xx_scan_bus,
+ .map_irq = gateway7001_map_irq,
+};
+
+int __init gateway7001_pci_init(void)
+{
+ if (machine_is_gateway7001())
+ pci_common_init(&gateway7001_pci);
+ return 0;
+}
+
+subsys_initcall(gateway7001_pci_init);
diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/Kconfig linux-2.6.17-owrt/arch/arm/mach-ixp4xx/Kconfig
--- linux-2.6.17/arch/arm/mach-ixp4xx/Kconfig 2006-06-18 03:49:35.000000000 +0200
+++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/Kconfig 2006-08-05 17:04:13.000000000 +0200
@@ -33,6 +33,14 @@
Engineering Coyote Gateway Reference Platform. For more
information on this platform, see <file:Documentation/arm/IXP4xx>.
+config MACH_GATEWAY7001
+ bool "Gateway 7001"
+ select PCI
+ help
+ Say 'Y' here if you want your kernel to support Gateway's
+ 7001 Access Point. For more information on this platform,
+ see http://openwrt.org
+
config ARCH_IXDP425
bool "IXDP425"
select PCI
diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/Makefile linux-2.6.17-owrt/arch/arm/mach-ixp4xx/Makefile
--- linux-2.6.17/arch/arm/mach-ixp4xx/Makefile 2006-06-18 03:49:35.000000000 +0200
+++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/Makefile 2006-08-05 17:02:21.000000000 +0200
@@ -11,4 +11,5 @@
obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o
obj-$(CONFIG_MACH_NAS100D) += nas100d-pci.o nas100d-setup.o nas100d-power.o
+obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o coyote-setup.o
diff -Nur linux-2.6.17/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.17-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
--- linux-2.6.17/include/asm-arm/arch-ixp4xx/uncompress.h 2006-06-18 03:49:35.000000000 +0200
+++ linux-2.6.17-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2006-08-05 17:03:32.000000000 +0200
@@ -38,9 +38,9 @@
static __inline__ void __arch_decomp_setup(unsigned long arch_id)
{
/*
- * Coyote and gtwx5715 only have UART2 connected
+ * Some targets only have UART2 connected
*/
- if (machine_is_adi_coyote() || machine_is_gtwx5715())
+ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001())
uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
else
uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
View Git Blame Copy Permalink