mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-05 05:49:42 +02:00
c5552ad039
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21952 3c298f89-4303-0410-b956-a3cf2f4a3e73
261 lines
10 KiB
Plaintext
261 lines
10 KiB
Plaintext
Generic PWM Device API
|
|
|
|
February 1, 2010
|
|
Bill Gatliff
|
|
<bgat@billgatliff.com>
|
|
|
|
|
|
|
|
The code in drivers/pwm and include/linux/pwm/ implements an API for
|
|
applications involving pulse-width-modulation signals. This document
|
|
describes how the API implementation facilitates both PWM-generating
|
|
devices, and users of those devices.
|
|
|
|
|
|
|
|
Motivation
|
|
|
|
The primary goals for implementing the "generic PWM API" are to
|
|
consolidate the various PWM implementations within a consistent and
|
|
redundancy-reducing framework, and to facilitate the use of
|
|
hotpluggable PWM devices.
|
|
|
|
Previous PWM-related implementations within the Linux kernel achieved
|
|
their consistency via cut-and-paste, but did not need to (and didn't)
|
|
facilitate more than one PWM-generating device within the system---
|
|
hotplug or otherwise. The Generic PWM Device API might be most
|
|
appropriately viewed as an update to those implementations, rather
|
|
than a complete rewrite.
|
|
|
|
|
|
|
|
Challenges
|
|
|
|
One of the difficulties in implementing a generic PWM framework is the
|
|
fact that pulse-width-modulation applications involve real-world
|
|
signals, which often must be carefully managed to prevent destruction
|
|
of hardware that is linked to those signals. A DC motor that
|
|
experiences a brief interruption in the PWM signal controlling it
|
|
might destructively overheat; it could suddenly change speed, losing
|
|
synchronization with a sensor; it could even suddenly change direction
|
|
or torque, breaking the mechanical device connected to it.
|
|
|
|
(A generic PWM device framework is not directly responsible for
|
|
preventing the above scenarios: that responsibility lies with the
|
|
hardware designer, and the application and driver authors. But it
|
|
must to the greatest extent possible make it easy to avoid such
|
|
problems).
|
|
|
|
A generic PWM device framework must accommodate the substantial
|
|
differences between available PWM-generating hardware devices, without
|
|
becoming sub-optimal for any of them.
|
|
|
|
Finally, a generic PWM device framework must be relatively
|
|
lightweight, computationally speaking. Some PWM users demand
|
|
high-speed outputs, plus the ability to regulate those outputs
|
|
quickly. A device framework must be able to "keep up" with such
|
|
hardware, while still leaving time to do real work.
|
|
|
|
The Generic PWM Device API is an attempt to meet all of the above
|
|
requirements. At its initial publication, the API was already in use
|
|
managing small DC motors, sensors and solenoids through a
|
|
custom-designed, optically-isolated H-bridge driver.
|
|
|
|
|
|
|
|
Functional Overview
|
|
|
|
The Generic PWM Device API framework is implemented in
|
|
include/linux/pwm/pwm.h and drivers/pwm/pwm.c. The functions therein
|
|
use information from pwm_device, pwm_channel and pwm_channel_config
|
|
structures to invoke services in PWM peripheral device drivers.
|
|
Consult drivers/pwm/atmel-pwm.c for an example driver.
|
|
|
|
There are two classes of adopters of the PWM framework:
|
|
|
|
"Users" -- those wishing to employ the API merely to produce PWM
|
|
signals; once they have identified the appropriate physical output
|
|
on the platform in question, they don't care about the details of
|
|
the underlying hardware
|
|
|
|
"Driver authors" -- those wishing to bind devices that can generate
|
|
PWM signals to the Generic PWM Device API, so that the services of
|
|
those devices become available to users. Assuming the hardware can
|
|
support the needs of a user, driver authors don't care about the
|
|
details of the user's application
|
|
|
|
Generally speaking, users will first invoke pwm_request() to obtain a
|
|
handle to a PWM device. They will then pass that handle to functions
|
|
like pwm_duty_ns() and pwm_period_ns() to set the duty cycle and
|
|
period of the PWM signal, respectively. They will also invoke
|
|
pwm_start() and pwm_stop() to turn the signal on and off.
|
|
|
|
The Generic PWM API framework also provides a sysfs interface to PWM
|
|
devices, which is adequate for basic application needs and testing.
|
|
|
|
Driver authors fill out a pwm_device structure, which describes the
|
|
capabilities of the PWM hardware being constructed--- including the
|
|
number of distinct output "channels" the peripheral offers. They then
|
|
invoke pwm_register() (usually from within their device's probe()
|
|
handler) to make the PWM API aware of their device. The framework
|
|
will call back to the methods described in the pwm_device structure as
|
|
users begin to configure and utilize the hardware.
|
|
|
|
Note that PWM signals can be produced by a variety of peripherals,
|
|
beyond the true "PWM hardware" offered by many system-on-chip devices.
|
|
Other possibilities include timer/counters with compare-match
|
|
capabilities, carefully-programmed synchronous serial ports
|
|
(e.g. SPI), and GPIO pins driven by kernel interval timers. With a
|
|
proper pwm_device structure, these devices and pseudo-devices can all
|
|
be accommodated by the Generic PWM Device API framework.
|
|
|
|
|
|
|
|
Using the API to Generate PWM Signals -- Basic Functions for Users
|
|
|
|
|
|
pwm_request() -- Returns a pwm_channel pointer, which is subsequently
|
|
passed to the other user-related PWM functions. Once requested, a PWM
|
|
channel is marked as in-use and subsequent requests prior to
|
|
pwm_free() will fail.
|
|
|
|
The names used to refer to PWM devices are defined by driver authors.
|
|
Typically they are platform device bus identifiers, and this
|
|
convention is encouraged for consistency.
|
|
|
|
|
|
pwm_free() -- Marks a PWM channel as no longer in use. The PWM device
|
|
is stopped before it is released by the API.
|
|
|
|
|
|
pwm_period_ns() -- Specifies the PWM signal's period, in nanoseconds.
|
|
|
|
|
|
pwm_duty_ns() -- Specifies the PWM signal's active duration, in nanoseconds.
|
|
|
|
|
|
pwm_duty_percent() -- Specifies the PWM signal's active duration, as a
|
|
percentage of the current period of the signal. NOTE: this value is
|
|
not recalculated if the period of the signal is subsequently changed.
|
|
|
|
|
|
pwm_start(), pwm_stop() -- Turns the PWM signal on and off. Except
|
|
where stated otherwise by a driver author, signals are stopped at the
|
|
end of the current period, at which time the output is set to its
|
|
inactive state.
|
|
|
|
|
|
pwm_polarity() -- Defines whether the PWM signal output's active
|
|
region is "1" or "0". A 10% duty-cycle, polarity=1 signal will
|
|
conventionally be at 5V (or 3.3V, or 1000V, or whatever the platform
|
|
hardware does) for 10% of the period. The same configuration of a
|
|
polarity=0 signal will be at 5V (or 3.3V, or ...) for 90% of the
|
|
period.
|
|
|
|
|
|
|
|
Using the API to Generate PWM Signals -- Advanced Functions
|
|
|
|
|
|
pwm_config() -- Passes a pwm_channel_config structure to the
|
|
associated device driver. This function is invoked by pwm_start(),
|
|
pwm_duty_ns(), etc. and is one of two main entry points to the PWM
|
|
driver for the hardware being used. The configuration change is
|
|
guaranteed atomic if multiple configuration changes are specified.
|
|
This function might sleep, depending on what the device driver has to
|
|
do to satisfy the request. All PWM device drivers must support this
|
|
entry point.
|
|
|
|
|
|
pwm_config_nosleep() -- Passes a pwm_channel_config structure to the
|
|
associated device driver. If the driver must sleep in order to
|
|
implement the requested configuration change, -EWOULDBLOCK is
|
|
returned. Users may call this function from interrupt handlers, for
|
|
example. This is the other main entry point into the PWM hardware
|
|
driver, but not all device drivers support this entry point.
|
|
|
|
|
|
pwm_synchronize(), pwm_unsynchronize() -- "Synchronizes" two or more
|
|
PWM channels, if the underlying hardware permits. (If it doesn't, the
|
|
framework facilitates emulating this capability but it is not yet
|
|
implemented). Synchronized channels will start and stop
|
|
simultaneously when any single channel in the group is started or
|
|
stopped. Use pwm_unsynchronize(..., NULL) to completely detach a
|
|
channel from any other synchronized channels. By default, all PWM
|
|
channels are unsynchronized.
|
|
|
|
|
|
pwm_set_handler() -- Defines an end-of-period callback. The indicated
|
|
function will be invoked in a worker thread at the end of each PWM
|
|
period, and can subsequently invoke pwm_config(), etc. Must be used
|
|
with extreme care for high-speed PWM outputs. Set the handler
|
|
function to NULL to un-set the handler.
|
|
|
|
|
|
|
|
Implementing a PWM Device API Driver -- Functions for Driver Authors
|
|
|
|
|
|
Fill out the appropriate fields in a pwm_device structure, and submit
|
|
to pwm_register():
|
|
|
|
|
|
bus_id -- the plain-text name of the device. Users will bind to a
|
|
channel on the device using this name plus the channel number. For
|
|
example, the Atmel PWMC's bus_id is "atmel_pwmc", the same as used by
|
|
the platform device driver (recommended). The first device registered
|
|
thereby receives bus_id "atmel_pwmc.0", which is what you put in
|
|
pwm_device.bus_id. Channels are then named "atmel_pwmc.0:[0-3]".
|
|
(Hint: just use pdev->dev.bus_id in your probe() method).
|
|
|
|
|
|
nchan -- the number of distinct output channels provided by the device.
|
|
|
|
|
|
request -- (optional) Invoked each time a user requests a channel.
|
|
Use to turn on clocks, clean up register states, etc. The framework
|
|
takes care of device locking/unlocking; you will see only successful
|
|
requests.
|
|
|
|
|
|
free -- (optional) Callback for each time a user relinquishes a
|
|
channel. The framework will have already stopped, unsynchronized and
|
|
un-handled the channel. Use to turn off clocks, etc. as necessary.
|
|
|
|
|
|
synchronize, unsynchronize -- (optional) Callbacks to
|
|
synchronize/unsynchronize channels. Some devices provide this
|
|
capability in hardware; for others, it can be emulated (see
|
|
atmel_pwmc.c's sync_mask for an example).
|
|
|
|
|
|
set_callback -- (optional) Invoked when a user requests a handler. If
|
|
the hardware supports an end-of-period interrupt, invoke the function
|
|
indicated during your interrupt handler. The callback function itself
|
|
is always internal to the API, and does not map directly to the user's
|
|
callback function.
|
|
|
|
|
|
config -- Invoked to change the device configuration, always from a
|
|
sleep-capable context. All the changes indicated must be performed
|
|
atomically, ideally synchronized to an end-of-period event (so that
|
|
you avoid short or long output pulses). You may sleep, etc. as
|
|
necessary within this function.
|
|
|
|
|
|
config_nosleep -- (optional) Invoked to change device configuration
|
|
from within a context that is not allowed to sleep. If you cannot
|
|
perform the requested configuration changes without sleeping, return
|
|
-EWOULDBLOCK.
|
|
|
|
|
|
|
|
Acknowledgements
|
|
|
|
|
|
The author expresses his gratitude to the countless developers who
|
|
have reviewed and submitted feedback on the various versions of the
|
|
Generic PWM Device API code, and those who have submitted drivers and
|
|
applications that use the framework. You know who you are. ;)
|
|
|