mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-09-12 16:07:07 +03:00
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18540 3c298f89-4303-0410-b956-a3cf2f4a3e73
715 lines
18 KiB
Diff
715 lines
18 KiB
Diff
Index: linux-2.6.30.9/drivers/spi/Kconfig
|
|
===================================================================
|
|
--- linux-2.6.30.9.orig/drivers/spi/Kconfig 2009-11-24 21:09:23.000000000 +0100
|
|
+++ linux-2.6.30.9/drivers/spi/Kconfig 2009-11-24 21:09:53.000000000 +0100
|
|
@@ -125,6 +125,12 @@
|
|
|
|
If unsure, say N.
|
|
|
|
+config SPI_EP93XX
|
|
+ tristate "EP93xx SSP SPI master"
|
|
+ depends on SPI_MASTER && ARCH_EP93XX && EXPERIMENTAL
|
|
+ help
|
|
+ This enables the EP93xx SPI master controller.
|
|
+
|
|
config SPI_IMX
|
|
tristate "Freescale iMX SPI controller"
|
|
depends on ARCH_IMX && EXPERIMENTAL
|
|
Index: linux-2.6.30.9/drivers/spi/Makefile
|
|
===================================================================
|
|
--- linux-2.6.30.9.orig/drivers/spi/Makefile 2009-11-24 21:09:23.000000000 +0100
|
|
+++ linux-2.6.30.9/drivers/spi/Makefile 2009-11-24 21:09:53.000000000 +0100
|
|
@@ -16,6 +16,7 @@
|
|
obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
|
|
obj-$(CONFIG_SPI_AU1550) += au1550_spi.o
|
|
obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
|
|
+obj-$(CONFIG_SPI_EP93XX) += spi_ep93xx.o
|
|
obj-$(CONFIG_SPI_GPIO) += spi_gpio.o
|
|
obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o
|
|
obj-$(CONFIG_SPI_IMX) += spi_imx.o
|
|
Index: linux-2.6.30.9/drivers/spi/spi_ep93xx.c
|
|
===================================================================
|
|
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
|
|
+++ linux-2.6.30.9/drivers/spi/spi_ep93xx.c 2009-11-24 21:21:25.000000000 +0100
|
|
@@ -0,0 +1,680 @@
|
|
+/*
|
|
+ * linux/drivers/spi/spi_ep93xx.c
|
|
+ *
|
|
+ * Copyright (C) 2007 Manfred Gruber <m.gruber@tirol.com>
|
|
+ * Small changes by Peter Ivanov <ivanovp@gmail.com> to support MMC over SPI, 2008
|
|
+ * SIM.ONE changes by Nuccio Raciti Simplemachine <nuccio.raciti@gmail.com>
|
|
+ *
|
|
+ * Based on pxa2xx_spi.c/spi_imx.c and bitbang.c driver
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#include <linux/blkdev.h>
|
|
+#include <linux/clk.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/dma-mapping.h>
|
|
+#include <linux/err.h>
|
|
+#include <linux/errno.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/io.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/spinlock.h>
|
|
+#include <linux/workqueue.h>
|
|
+
|
|
+#include <linux/spi/spi.h>
|
|
+
|
|
+#include <mach/hardware.h>
|
|
+#include <mach/ep93xx-regs.h>
|
|
+#include <asm/gpio.h>
|
|
+
|
|
+/* #define SPI_EP93XX_DEBUG */
|
|
+
|
|
+#define DEFINE_SSP_REG(reg, off) \
|
|
+ static inline u32 read_##reg(void *p) \
|
|
+ { return __raw_readl(p + (off)); } \
|
|
+ static inline void write_##reg(u32 v, void *p) \
|
|
+ { __raw_writel(v, p + (off)); }
|
|
+
|
|
+DEFINE_SSP_REG(SSPCR0, 0x00)
|
|
+DEFINE_SSP_REG(SSPCR1, 0x04)
|
|
+DEFINE_SSP_REG(SSPDR, 0x08)
|
|
+DEFINE_SSP_REG(SSPSR, 0x0c)
|
|
+DEFINE_SSP_REG(SSPCPSR, 0x10)
|
|
+DEFINE_SSP_REG(SSPIIR, 0x14)
|
|
+DEFINE_SSP_REG(SSPICR, 0x14)
|
|
+
|
|
+/* Bits in SSPCR0 */
|
|
+#define SSPCR0_DSS_MASK 0x0000000f
|
|
+#define SSPCR0_FRF_MASK 0x00000030
|
|
+#define SSPCR0_FRF_SHIFT 4
|
|
+#define SSPCR0_FRF_MOTOROLA (0 << SSPCR0_FRF_SHIFT)
|
|
+#define SSPCR0_FRF_TI (1 << SSPCR0_FRF_SHIFT)
|
|
+#define SSPCR0_FRF_NI (2 << SSPCR0_FRF_SHIFT)
|
|
+#define SSPCR0_SPO 0x00000040
|
|
+#define SSPCR0_SPH 0x00000080
|
|
+#define SSPCR0_SCR_MASK 0x0000ff00
|
|
+#define SSPCR0_SCR_SHIFT 8
|
|
+
|
|
+/* Bits in SSPCR1 */
|
|
+#define SSPC1_RIE 0x00000001
|
|
+#define SSPC1_TIE 0x00000002
|
|
+#define SSPC1_RORIE 0x00000004
|
|
+#define SSPC1_LBM 0x00000008
|
|
+#define SSPC1_SSE 0x00000010
|
|
+#define SSPC1_MS 0x00000020
|
|
+#define SSPC1_SOD 0x00000040
|
|
+
|
|
+/* Bits in SSPSR */
|
|
+#define SSPSR_TFE 0x00000001 /* TX FIFO is empty */
|
|
+#define SSPSR_TNF 0x00000002 /* TX FIFO is not full */
|
|
+#define SSPSR_RNE 0x00000004 /* RX FIFO is not empty */
|
|
+#define SSPSR_RFF 0x00000008 /* RX FIFO is full */
|
|
+#define SSPSR_BSY 0x00000010 /* SSP is busy */
|
|
+#define SSPSR_MASK 0x0000001F /* SSP is busy */
|
|
+
|
|
+/* Bits in SSPCPSR */
|
|
+#define SSPCPSR_SCR_MASK 0x000000ff
|
|
+
|
|
+/* Bits in SSPIIR */
|
|
+#define SSPIIR_RIS 0x00000001 /* RX FIFO IRQ status */
|
|
+#define SSPIIR_TIS 0x00000002 /* TX FIFO is not full */
|
|
+#define SSPIIR_RORIS 0x00000004 /* RX FIFO is full */
|
|
+
|
|
+#define SPI_SSPCLK 7.4e6
|
|
+#define SPI_SSPCLK_REV_E2 14.8e6 /* only for chip Rev E2 */
|
|
+#define SPI_MAX_SPEED 3.7e6
|
|
+#define SPI_MAX_SPEED_REV_E2 7.4e6 /* only for chip Rev E2 */
|
|
+#define SPI_CPSDVR_DIV_MIN 2
|
|
+#define SPI_CPSDVR_DIV_MAX 254
|
|
+#define SPI_SCR_DIV_MIN 0
|
|
+#define SPI_SCR_DIV_MAX 255
|
|
+#define SPI_DATARATE_OK 0
|
|
+#define SPI_DATARATE_NOK -1
|
|
+
|
|
+struct driver_data {
|
|
+ /* Driver model hookup */
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ /* SPI framework hookup */
|
|
+ struct spi_master *master;
|
|
+
|
|
+ /* SSP register addresses */
|
|
+ void *ioaddr;
|
|
+
|
|
+ /* SSP irq */
|
|
+ int irq;
|
|
+
|
|
+ struct list_head queue;
|
|
+
|
|
+ /* SSP spinlock */
|
|
+ spinlock_t lock;
|
|
+
|
|
+ struct workqueue_struct *workqueue;
|
|
+ struct work_struct work;
|
|
+
|
|
+ u8 busy;
|
|
+ u8 use_dma;
|
|
+};
|
|
+
|
|
+static unsigned ep93xx_txrx_8(struct spi_device *spi, struct spi_transfer *t)
|
|
+{
|
|
+ struct driver_data *drv_data;
|
|
+ const u8 *tx = t->tx_buf;
|
|
+ u8 *rx = t->rx_buf;
|
|
+ unsigned count = t->len;
|
|
+ u8 byte;
|
|
+ int busy;
|
|
+
|
|
+ drv_data = spi_master_get_devdata(spi->master);
|
|
+
|
|
+#ifdef SPI_EP93XX_DEBUG
|
|
+ dev_info(&spi->dev,
|
|
+ "ep93xx_txrx_8: t->len %u \n", t->len);
|
|
+#endif
|
|
+
|
|
+ while (likely(count > 0)) {
|
|
+ byte = 0;
|
|
+ if (tx) {
|
|
+ byte = *tx++;
|
|
+#ifdef SPI_EP93XX_DEBUG
|
|
+ dev_info(&spi->dev,
|
|
+ "ep93xx_txrx_8: write 0x%x \n", byte);
|
|
+#endif
|
|
+ }
|
|
+
|
|
+ write_SSPDR(byte, drv_data->ioaddr);
|
|
+ busy = read_SSPSR(drv_data->ioaddr);
|
|
+ while (busy & SSPSR_BSY) {
|
|
+ cpu_relax();
|
|
+ busy = read_SSPSR(drv_data->ioaddr);
|
|
+#ifdef SPI_EP93XX_DEBUG
|
|
+ dev_info(&spi->dev,
|
|
+ "ep93xx_txrx_8: delay. SSPSR: 0x%X\n", busy);
|
|
+#endif
|
|
+ }
|
|
+ byte = read_SSPDR(drv_data->ioaddr);
|
|
+
|
|
+ if (rx) {
|
|
+ *rx++ = byte;
|
|
+#ifdef SPI_EP93XX_DEBUG
|
|
+ dev_info(&spi->dev,
|
|
+ "ep93xx_txrx_8: read 0x%x \n", byte);
|
|
+#endif
|
|
+ }
|
|
+ count -= 1;
|
|
+ }
|
|
+ return t->len - count;
|
|
+}
|
|
+
|
|
+
|
|
+static unsigned ep93xx_txrx_16(struct spi_device *spi, struct spi_transfer *t)
|
|
+{
|
|
+
|
|
+ struct driver_data *drv_data;
|
|
+ const u16 *tx = t->tx_buf;
|
|
+ u16 *rx = t->rx_buf;
|
|
+ unsigned count = t->len;
|
|
+ u16 word;
|
|
+ int busy;
|
|
+
|
|
+ drv_data = spi_master_get_devdata(spi->master);
|
|
+
|
|
+#ifdef SPI_EP93XX_DEBUG
|
|
+ dev_info(&spi->dev,
|
|
+ "ep93xx_txrx_16: t->len %u \n", t->len);
|
|
+#endif
|
|
+ while (likely(count > 0)) {
|
|
+ word = 0;
|
|
+ if (tx) {
|
|
+ word = *tx++;
|
|
+#ifdef SPI_EP93XX_DEBUG
|
|
+ dev_info(&spi->dev,
|
|
+ "ep93xx_txrx_16: write 0x%x \n", word);
|
|
+#endif
|
|
+ }
|
|
+
|
|
+ write_SSPDR(word, drv_data->ioaddr);
|
|
+ busy = read_SSPSR(drv_data->ioaddr);
|
|
+ while (busy & SSPSR_BSY) {
|
|
+ cpu_relax();
|
|
+ busy = read_SSPSR(drv_data->ioaddr);
|
|
+#ifdef SPI_EP93XX_DEBUG
|
|
+ dev_info(&spi->dev,
|
|
+ "ep93xx_txrx_8: delay.\n");
|
|
+#endif
|
|
+ }
|
|
+
|
|
+ word = read_SSPDR(drv_data->ioaddr);
|
|
+
|
|
+ if (rx) {
|
|
+ *rx++ = word;
|
|
+#ifdef SPI_EP93XX_DEBUG
|
|
+ dev_info(&spi->dev,
|
|
+ "ep93xx_txrx_16: read 0x%x \n", word);
|
|
+#endif
|
|
+ }
|
|
+ count -= 2;
|
|
+ }
|
|
+ return t->len - count;
|
|
+}
|
|
+
|
|
+static u32 spi_data_rate(u32 speed_hz, u32 *div_cpsdvr, u32 *div_scr,
|
|
+ struct driver_data *drv_data, struct spi_device *spi)
|
|
+{
|
|
+ unsigned int spi_sspclk = SPI_SSPCLK;
|
|
+ unsigned int bus_speed_max = SPI_MAX_SPEED;
|
|
+ unsigned int bus_hz_tmp = 0;
|
|
+ u32 div_cpsdvr_tmp;
|
|
+ u32 div_scr_tmp;
|
|
+ u32 rv = SPI_DATARATE_NOK;
|
|
+ int chip_rev;
|
|
+
|
|
+ /* Checking CHIP_ID */
|
|
+ chip_rev = (__raw_readl (EP93XX_SYSCON_CHIP_ID) >> 28) & 0xF;
|
|
+ if (chip_rev == 7)
|
|
+ {
|
|
+ /* Chip version: Rev E2 */
|
|
+ /* This device has double speed SSP clock */
|
|
+ spi_sspclk = SPI_SSPCLK_REV_E2;
|
|
+ bus_speed_max = SPI_MAX_SPEED_REV_E2;
|
|
+#ifdef SPI_EP93XX_DEBUG
|
|
+ dev_info(&spi->dev,
|
|
+ "Chip Rev E2 detected! This device has double speed SSP clock.\n");
|
|
+#endif
|
|
+ }
|
|
+
|
|
+ *div_cpsdvr = SPI_CPSDVR_DIV_MAX;
|
|
+ *div_scr = SPI_SCR_DIV_MAX;
|
|
+
|
|
+ for (div_cpsdvr_tmp = SPI_CPSDVR_DIV_MIN;
|
|
+ div_cpsdvr_tmp <= SPI_CPSDVR_DIV_MAX && rv; div_cpsdvr_tmp++) {
|
|
+ for (div_scr_tmp = SPI_SCR_DIV_MIN;
|
|
+ div_scr_tmp <= SPI_SCR_DIV_MAX && rv; div_scr_tmp++) {
|
|
+ bus_hz_tmp = spi_sspclk / (div_cpsdvr_tmp * (1 + div_scr_tmp));
|
|
+ if (bus_hz_tmp <= speed_hz && bus_hz_tmp <= bus_speed_max) {
|
|
+ *div_cpsdvr = div_cpsdvr_tmp;
|
|
+ *div_scr = div_scr_tmp;
|
|
+ rv = SPI_DATARATE_OK;
|
|
+ }
|
|
+ }
|
|
+ }
|
|
+#ifdef SPI_EP93XX_DEBUG
|
|
+ dev_info(&spi->dev,
|
|
+ "Needed SPI bus frequency: %i Hz\n", speed_hz);
|
|
+ dev_info(&spi->dev,
|
|
+ "Actual SPI bus frequency: %i Hz\n", bus_hz_tmp);
|
|
+#endif
|
|
+ return rv;
|
|
+}
|
|
+
|
|
+/* Supported modes (returns -EINVAL if not supported mode requested) */
|
|
+#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH)
|
|
+
|
|
+static int ep93xx_spi_setup(struct spi_device *spi)
|
|
+{
|
|
+ struct driver_data *drv_data;
|
|
+ u16 val;
|
|
+ u32 div_scr;
|
|
+ u32 div_cpsdvr;
|
|
+ unsigned int bits = spi->bits_per_word;
|
|
+ unsigned long speed_hz = spi->max_speed_hz;
|
|
+
|
|
+ drv_data = spi_master_get_devdata(spi->master);
|
|
+
|
|
+ /* enable SSP */
|
|
+ write_SSPCR1(SSPC1_SSE, drv_data->ioaddr);
|
|
+ /* Enable SSP and loopback mode (only for testing!) */
|
|
+ /* write_SSPCR1(SSPC1_SSE | SSPC1_LBM, drv_data->ioaddr); */
|
|
+
|
|
+ if (bits == 0)
|
|
+ bits = 8;
|
|
+ if (bits < 4 || bits > 16) {
|
|
+ dev_err(&spi->dev,
|
|
+ "setup invalid bits_per_word %u (4 to 16)\n", bits);
|
|
+ return -EINVAL;
|
|
+ } else {
|
|
+ val = read_SSPCR0(drv_data->ioaddr);
|
|
+ val = val & ~SSPCR0_DSS_MASK ;
|
|
+ val = val | (bits-1);
|
|
+ write_SSPCR0(val, drv_data->ioaddr);
|
|
+#ifdef SPI_EP93XX_DEBUG
|
|
+ dev_info (&spi->dev, "Bits per word: %i\n", bits);
|
|
+#endif
|
|
+ }
|
|
+
|
|
+ if (spi->mode & ~MODEBITS) {
|
|
+ dev_err(&spi->dev, "unsupported mode bits: %x\n",
|
|
+ spi->mode & ~MODEBITS);
|
|
+ return -EINVAL;
|
|
+ } else {
|
|
+ val = read_SSPCR0(drv_data->ioaddr);
|
|
+ val = val & ~SSPCR0_SPO;
|
|
+ val = val & ~SSPCR0_SPH;
|
|
+ if (spi->mode & SPI_CPOL)
|
|
+ {
|
|
+ val = val | SSPCR0_SPO;
|
|
+ }
|
|
+#ifdef SPI_EP93XX_DEBUG
|
|
+ dev_info (&spi->dev, "Clock polarity (CPOL): %s\n", (spi->mode & SPI_CPHA) ? "1" : "0");
|
|
+#endif
|
|
+ if (spi->mode & SPI_CPHA)
|
|
+ {
|
|
+ val = val | SSPCR0_SPH;
|
|
+ }
|
|
+#ifdef SPI_EP93XX_DEBUG
|
|
+ dev_info (&spi->dev, "Clock phase (CPHA): %s\n", (spi->mode & SPI_CPHA) ? "1" : "0");
|
|
+#endif
|
|
+ write_SSPCR0(val, drv_data->ioaddr);
|
|
+ }
|
|
+
|
|
+ if (SPI_DATARATE_OK == (spi_data_rate(speed_hz, &div_cpsdvr,
|
|
+ &div_scr, drv_data, spi))) {
|
|
+
|
|
+ val = read_SSPCPSR(drv_data->ioaddr);
|
|
+ val = val & ~SSPCPSR_SCR_MASK;
|
|
+ val = val | div_cpsdvr;
|
|
+#ifdef SPI_EP93XX_DEBUG
|
|
+ dev_info (&spi->dev, "SSPCPSR: 0x%X\n", val);
|
|
+#endif
|
|
+ write_SSPCPSR(val, drv_data->ioaddr);
|
|
+
|
|
+ val = read_SSPCR0(drv_data->ioaddr);
|
|
+ val = val & ~SSPCR0_SCR_MASK;
|
|
+ val = val | (div_scr << SSPCR0_SCR_SHIFT);
|
|
+#ifdef SPI_EP93XX_DEBUG
|
|
+ dev_info (&spi->dev, "SSPCR0: 0x%X (div_scr: 0x%X)\n", val, div_scr);
|
|
+#endif
|
|
+ write_SSPCR0(val, drv_data->ioaddr);
|
|
+ } else
|
|
+ return -EINVAL;
|
|
+
|
|
+ /* reenable */
|
|
+ val = read_SSPCR1(drv_data->ioaddr);
|
|
+ val = val & ~SSPC1_SSE;
|
|
+ write_SSPCR1(val, drv_data->ioaddr);
|
|
+ val = read_SSPCR1(drv_data->ioaddr);
|
|
+ val = val | SSPC1_SSE;
|
|
+ write_SSPCR1(val, drv_data->ioaddr);
|
|
+#ifdef SPI_EP93XX_DEBUG
|
|
+ dev_info (&spi->dev, "Loopback mode: %s\n", (val & SSPC1_LBM) ? "On" : "Off");
|
|
+#endif
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int ep93xx_spi_transfer(struct spi_device *spi, struct spi_message *m)
|
|
+{
|
|
+ struct driver_data *drv_data;
|
|
+ unsigned long flags;
|
|
+ int status = 0;
|
|
+
|
|
+ m->actual_length = 0;
|
|
+ m->status = -EINPROGRESS;
|
|
+
|
|
+ drv_data = spi_master_get_devdata(spi->master);
|
|
+
|
|
+ spin_lock_irqsave(&drv_data->lock, flags);
|
|
+ if (!spi->max_speed_hz)
|
|
+ status = -ENETDOWN;
|
|
+ else {
|
|
+ list_add_tail(&m->queue, &drv_data->queue);
|
|
+ queue_work(drv_data->workqueue, &drv_data->work);
|
|
+ }
|
|
+ spin_unlock_irqrestore(&drv_data->lock, flags);
|
|
+ return status;
|
|
+}
|
|
+
|
|
+static void ep93xx_work(struct work_struct *work)
|
|
+{
|
|
+ struct driver_data *drv_data =
|
|
+ container_of(work, struct driver_data, work);
|
|
+ unsigned long flags;
|
|
+
|
|
+ spin_lock_irqsave(&drv_data->lock, flags);
|
|
+ drv_data->busy = 1;
|
|
+
|
|
+ while (!list_empty(&drv_data->queue)) {
|
|
+ struct spi_message *m;
|
|
+ struct spi_device *spi;
|
|
+ struct spi_transfer *t = NULL;
|
|
+ int status;
|
|
+
|
|
+ m = container_of(drv_data->queue.next, struct spi_message,
|
|
+ queue);
|
|
+ list_del_init(&m->queue);
|
|
+ spin_unlock_irqrestore(&drv_data->lock, flags);
|
|
+
|
|
+ spi = m->spi;
|
|
+ status = 0;
|
|
+
|
|
+ list_for_each_entry(t, &m->transfers, transfer_list) {
|
|
+
|
|
+ if (!t->tx_buf && !t->rx_buf && t->len) {
|
|
+ status = -EINVAL;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ if (t->len) {
|
|
+ if (!m->is_dma_mapped) {
|
|
+ t->rx_dma = 0;
|
|
+ t->tx_dma = 0;
|
|
+ }
|
|
+ if (t->bits_per_word <= 8)
|
|
+ status = ep93xx_txrx_8(spi, t);
|
|
+ else
|
|
+ status = ep93xx_txrx_16(spi, t);
|
|
+ }
|
|
+
|
|
+ if (status != t->len) {
|
|
+ if (status > 0)
|
|
+ status = -EMSGSIZE;
|
|
+ break;
|
|
+ }
|
|
+ m->actual_length += status;
|
|
+ status = 0;
|
|
+
|
|
+ /* protocol tweaks before next transfer */
|
|
+ if (t->delay_usecs)
|
|
+ udelay(t->delay_usecs);
|
|
+
|
|
+ if (t->transfer_list.next == &m->transfers)
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ m->status = status;
|
|
+ m->complete(m->context);
|
|
+
|
|
+ spin_lock_irqsave(&drv_data->lock, flags);
|
|
+ }
|
|
+ drv_data->busy = 0;
|
|
+ spin_unlock_irqrestore(&drv_data->lock, flags);
|
|
+}
|
|
+
|
|
+static irqreturn_t ssp_int(int irq, void *dev_id)
|
|
+{
|
|
+ struct driver_data *drv_data = dev_id;
|
|
+ u8 status;
|
|
+ status = read_SSPIIR(drv_data->ioaddr);
|
|
+
|
|
+ if (status & SSPIIR_RORIS) {
|
|
+ dev_err(&drv_data->pdev->dev, "SPI rx overrun.\n");
|
|
+
|
|
+ /* We clear the overrun here ! */
|
|
+ write_SSPICR(0, drv_data->ioaddr);
|
|
+ }
|
|
+
|
|
+ /* RX interrupt */
|
|
+ if (status & SSPIIR_RIS)
|
|
+ dev_info(&drv_data->pdev->dev, "SPI RX interrupt\n");
|
|
+
|
|
+ /* TX interrupt */
|
|
+ if (status & SSPIIR_TIS)
|
|
+ dev_info(&drv_data->pdev->dev, "SPI TX interrupt\n");
|
|
+
|
|
+ write_SSPICR(0, drv_data->ioaddr);
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+static int __init ep93xx_spi_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct device *dev = &pdev->dev;
|
|
+ struct spi_master *master;
|
|
+ struct driver_data *drv_data = 0;
|
|
+ struct resource *memory_resource;
|
|
+ int status = 0;
|
|
+ u16 val;
|
|
+
|
|
+ /* Allocate master with space for drv_data and null dma buffer */
|
|
+ master = spi_alloc_master(dev, sizeof(struct driver_data));
|
|
+ if (!master) {
|
|
+ dev_err(&pdev->dev, "cannot alloc spi_master\n");
|
|
+ return -ENOMEM;
|
|
+ }
|
|
+ drv_data = spi_master_get_devdata(master);
|
|
+ drv_data->master = master;
|
|
+ drv_data->pdev = pdev;
|
|
+
|
|
+ master->num_chipselect = EP93XX_GPIO_LINE_H(7) + 1;
|
|
+ master->bus_num = pdev->id;
|
|
+ master->setup = ep93xx_spi_setup;
|
|
+ master->transfer = ep93xx_spi_transfer;
|
|
+
|
|
+ spin_lock_init(&drv_data->lock);
|
|
+ INIT_LIST_HEAD(&drv_data->queue);
|
|
+
|
|
+ /* Setup register addresses */
|
|
+ memory_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ if (!memory_resource) {
|
|
+ dev_err(&pdev->dev, "memory resources not defined\n");
|
|
+ status = -EIO;
|
|
+ goto out_error_master_alloc;
|
|
+ } else {
|
|
+ drv_data->ioaddr = ioremap(memory_resource->start,
|
|
+ memory_resource->end - memory_resource->start);
|
|
+ if (drv_data->ioaddr == NULL) {
|
|
+ dev_err(&pdev->dev, "ioremap failed\n");
|
|
+ status = -EIO;
|
|
+ goto out_error_master_alloc;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ /* Attach to IRQ */
|
|
+ drv_data->irq = platform_get_irq(pdev, 0);
|
|
+ if (drv_data->irq < 0)
|
|
+ return drv_data->irq;
|
|
+
|
|
+ if (drv_data->irq <= 0) {
|
|
+ dev_err(&pdev->dev, "IRQ resource not defined\n");
|
|
+ status = -ENODEV;
|
|
+ goto out_error_master_alloc;
|
|
+ }
|
|
+
|
|
+ status = request_irq(drv_data->irq, ssp_int, 0, "ep93xx-spi", drv_data);
|
|
+ if (status < 0) {
|
|
+ dev_err(&pdev->dev, "cannot get SPI IRQ 0\n");
|
|
+ goto out_error_master_alloc;
|
|
+ }
|
|
+
|
|
+ /* SSP default configuration, enable */
|
|
+ write_SSPCR1(SSPC1_SSE, drv_data->ioaddr);
|
|
+
|
|
+ /* run as master */
|
|
+ val = read_SSPCR1(drv_data->ioaddr);
|
|
+ val = val & ~SSPC1_MS;
|
|
+ write_SSPCR1(val, drv_data->ioaddr);
|
|
+
|
|
+ /* frame format to Motorola SPI Format */
|
|
+ val = read_SSPCR0(drv_data->ioaddr);
|
|
+ val = val & ~SSPCR0_FRF_MASK ;
|
|
+ val = val | SSPCR0_FRF_MOTOROLA;
|
|
+ write_SSPCR0(val, drv_data->ioaddr);
|
|
+
|
|
+ /* enable interrupts */
|
|
+ val = read_SSPCR1(drv_data->ioaddr);
|
|
+ /* for now only overrun is handled */
|
|
+ /* val = val | SSPC1_RIE | SSPC1_TIE | SSPC1_RORIE; */
|
|
+ val = val | SSPC1_RORIE;
|
|
+ write_SSPCR1(val, drv_data->ioaddr);
|
|
+
|
|
+ /* SSP default configuration, re enable */
|
|
+ val = read_SSPCR1(drv_data->ioaddr);
|
|
+ val = val & ~SSPC1_SSE;
|
|
+ write_SSPCR1(val, drv_data->ioaddr);
|
|
+ val = read_SSPCR1(drv_data->ioaddr);
|
|
+ val = val | SSPC1_SSE;
|
|
+ write_SSPCR1(val, drv_data->ioaddr);
|
|
+
|
|
+ /* Register with the SPI framework */
|
|
+ platform_set_drvdata(pdev, drv_data);
|
|
+ status = spi_register_master(master);
|
|
+ if (status != 0) {
|
|
+ dev_err(&pdev->dev, "cannot register SPI master\n");
|
|
+ goto out_error_master_alloc;
|
|
+ } else
|
|
+ dev_info(&pdev->dev, "SPI Controller initalized\n");
|
|
+
|
|
+ INIT_WORK(&drv_data->work, ep93xx_work);
|
|
+ spin_lock_init(&drv_data->lock);
|
|
+ INIT_LIST_HEAD(&drv_data->queue);
|
|
+
|
|
+ /* this task is the only thing to touch the SPI bits */
|
|
+ drv_data->busy = 0;
|
|
+ drv_data->workqueue = create_singlethread_workqueue(
|
|
+ dev_name(drv_data->master->dev.parent));
|
|
+/* drv_data->master->cdev.dev->bus_id); */
|
|
+ if (drv_data->workqueue == NULL) {
|
|
+ status = -EBUSY;
|
|
+ goto out_error_free_irq;
|
|
+ }
|
|
+
|
|
+ return status;
|
|
+
|
|
+out_error_free_irq:
|
|
+ free_irq(drv_data->irq, master);
|
|
+out_error_master_alloc:
|
|
+ if (drv_data->ioaddr != NULL)
|
|
+ iounmap(drv_data->ioaddr);
|
|
+ spi_master_put(master);
|
|
+ return status;
|
|
+}
|
|
+
|
|
+static int __exit ep93xx_spi_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct driver_data *drv_data = platform_get_drvdata(pdev);
|
|
+ u8 val;
|
|
+
|
|
+ WARN_ON(!list_empty(&drv_data->queue));
|
|
+
|
|
+ destroy_workqueue(drv_data->workqueue);
|
|
+
|
|
+ /* switch off SSP*/
|
|
+ val = read_SSPCR1(drv_data->ioaddr);
|
|
+ val = val & ~SSPC1_SSE;
|
|
+ write_SSPCR1(val, drv_data->ioaddr);
|
|
+
|
|
+ /* release irqs */
|
|
+ if (drv_data->irq > 0)
|
|
+ free_irq(drv_data->irq, drv_data);
|
|
+
|
|
+ /* Disconnect from the SPI framework */
|
|
+ spi_unregister_master(drv_data->master);
|
|
+ spi_master_put(drv_data->master);
|
|
+
|
|
+ if (drv_data->ioaddr != NULL)
|
|
+ iounmap(drv_data->ioaddr);
|
|
+
|
|
+ /* Prevent double remove */
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_PM
|
|
+static int ep93xx_spi_suspend(struct platform_device *pdev, pm_message_t msg)
|
|
+{
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int ep93xx_spi_resume(struct platform_device *pdev)
|
|
+{
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+#else
|
|
+#define ep93xx_spi_suspend NULL
|
|
+#define ep93xx_spi_resume NULL
|
|
+#endif
|
|
+
|
|
+struct platform_driver ep93xx_spi_device = {
|
|
+ .remove = __exit_p(ep93xx_spi_remove),
|
|
+#ifdef CONFIG_PM
|
|
+ .suspend = ep93xx_spi_suspend,
|
|
+ .resume = ep93xx_spi_resume,
|
|
+#endif
|
|
+ .driver = {
|
|
+ .name = "ep93xx-spi",
|
|
+ .bus = &spi_bus_type,
|
|
+ .owner = THIS_MODULE,
|
|
+ },
|
|
+};
|
|
+
|
|
+int __init ep93xx_spi_init(void)
|
|
+{
|
|
+ return platform_driver_probe(&ep93xx_spi_device, ep93xx_spi_probe);
|
|
+}
|
|
+
|
|
+void __exit ep93xx_spi_exit(void)
|
|
+{
|
|
+ platform_driver_unregister(&ep93xx_spi_device);
|
|
+}
|
|
+
|
|
+module_init(ep93xx_spi_init);
|
|
+module_exit(ep93xx_spi_exit);
|
|
+
|
|
+MODULE_DESCRIPTION("EP93XX SPI Driver");
|
|
+MODULE_AUTHOR("Manfred Gruber, <m.gruber@tirol.com>");
|
|
+MODULE_LICENSE("GPL");
|