openwrt-xburst/package/wifidog/files/wifidog.conf

# $Header$
# WiFiDog Configuration file

# Parameter: GatewayID
# Default: default
# Optional but essential for monitoring purposes
#
# Set this to the template ID on the auth server
# this is used to give a customized login page to the clients
# If none is supplied, the default login page will be used.

GatewayID default

# Parameter: ExternalInterface
# Default: NONE
# Optional
#
# Set this to the external interface.  Typically vlan1 for OpenWrt, and eth0 or ppp0 otherwise

# ExternalInterface eth0

# Parameter: GatewayInterface
# Default: NONE
# Mandatory
#
# Set this to the internal interface.    Typically br0 for OpenWrt, and eth1 otherwise

GatewayInterface br0

# Parameter: GatewayAddress
# Default: Find it from GatewayInterface
# Optional
#
# Set this to the internal IP address of the gateway

# GatewayAddress 192.168.1.1

# Parameter: AuthServMaxTries
# Default: 1
# Optional
#
# Sets the number of auth servers the gateway will attempt to contact when a request fails.
# this number should be equal to the number of AuthServer lines in this
# configuration but it should probably not exceed 3.

# AuthServMaxTries 3

# Parameter: AuthServer
# Default: NONE
# Mandatory
#
# Set this to the hostname or IP of your auth server, the path where
# WiFiDog-auth resides  and optionally as a second argument, the port it
# listens on.
#AuthServer {
#	Hostname      (Mandatory; Default: NONE)
#	SSLAvailable  (Optional; Default: no; Possible values: yes, no)
#	SSLPort 443   (Optional; Default: 443)
#	HTTPPort 80   (Optional; Default: 80)
#	Path wifidog/ (Optional; Default: /wifidog/ Note:  The path must be both prefixed and suffixed by /.  Use a single / for server root.)
#}

#AuthServer {
#    Hostname auth.ilesansfil.org
#    SSLAvailable yes
#    Path /
#}

#AuthServer {
#    Hostname auth2.ilesansfil.org
#    SSLAvailable yes
#    Path /
#}

#AuthServer {
#    Hostname auth3.ilesansfil.org
#    SSLAvailable yes
#    Path /
#}

# Parameter: Daemon
# Default: 1
# Optional
#
# Set this to true if you want to run as a daemon
# Daemon 1

# Parameter: GatewayPort
# Default: 2060
# Optional
#
# Listen on this port
# GatewayPort 2060

# Parameter: HTTPDName
# Default: WiFiDog
# Optional
#
# Define what name the HTTPD server will respond
# HTTPDName WiFiDog

# Parameter: HTTPDMaxConn
# Default: 10
# Optional
#
# How many sockets to listen to
# HTTPDMaxConn 10

# Parameter: CheckInterval
# Default: 60
# Optional
#
# How many seconds should we wait between timeout checks
CheckInterval 60

# Parameter: ClientTimeout
# Default: 5
# Optional
#
# Set this to the desired of number of CheckInterval of inactivity before a client is logged out
# The timeout will be INTERVAL * TIMEOUT
ClientTimeout 5

# Parameter: FirewallRuleSet
# Default: none
# Mandatory
#
# Groups a number of FirewallRule statements together.

# Parameter: FirewallRule
# Default: none
# 
# Define one firewall rule in a rule set.

# Rule Set: global
# 
# Used for rules to be applied to all other rulesets except locked.
# This is the default config for the Teliphone service.
FirewallRuleSet global {
    FirewallRule allow udp to 69.90.89.192/27
    FirewallRule allow udp to 69.90.85.0/27
    FirewallRule allow tcp port 80 to 69.90.89.205
}

# Rule Set: validating-users
#
# Used for new users validating their account
FirewallRuleSet validating-users {
    FirewallRule block tcp port 25
    FirewallRule allow to 0.0.0.0/0
}

# Rule Set: known-users
#
# Used for normal validated users.
FirewallRuleSet known-users {
    FirewallRule allow to 0.0.0.0/0
}

# Rule Set: unknown-users
#
# Used for unvalidated users, this is the ruleset that gets redirected.
#
# XXX The redirect code adds the Default DROP clause.
FirewallRuleSet unknown-users {
    FirewallRule allow udp port 53
    FirewallRule allow tcp port 53
    FirewallRule allow udp port 67
    FirewallRule allow tcp port 67
}

# Rule Set: locked-users
#
# Used for users that have been locked out.
FirewallRuleSet locked-users {
    FirewallRule block to 0.0.0.0/0
}