1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-25 19:56:27 +02:00
openwrt-xburst/target/linux/brcm63xx/patches-2.6.39/447-board_gw6200_gw6000.patch
florian 50d9b77c8c bcm63xx: Add support for 2.6.39
Add support for Kernel 2.6.39. Boots fine on a BCM6358.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27019 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-27 09:54:52 +00:00

130 lines
2.2 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -432,6 +432,117 @@ static struct board_info __initdata boar
},
};
+static struct board_info __initdata board_gw6200 = {
+ .name = "GW6200",
+ .expected_cpu_id = 0x6348,
+
+ .has_uart0 = 1,
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .has_ohci0 = 1,
+
+ .has_dsp = 1,
+ .dsp = {
+ .gpio_rst = 8, /* FIXME: What is real GPIO here? */
+ .gpio_int = 34,
+ .ext_irq = 2,
+ .cs = 2,
+ },
+
+ .leds = {
+ {
+ .name = "line1",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "line2",
+ .gpio = 5,
+ .active_low = 1,
+ },
+ {
+ .name = "line3",
+ .gpio = 6,
+ .active_low = 1,
+ },
+ {
+ .name = "tel",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "ethernet",
+ .gpio = 35,
+ .active_low = 1,
+ },
+ },
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 36,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .threshold = 3,
+ },
+ },
+};
+
+static struct board_info __initdata board_gw6000 = {
+ .name = "GW6000",
+ .expected_cpu_id = 0x6348,
+
+ .has_uart0 = 1,
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .has_ohci0 = 1,
+
+ .has_dsp = 1,
+ .dsp = {
+ .gpio_rst = 6,
+ .gpio_int = 34,
+ .ext_irq = 2,
+ .cs = 2,
+ },
+
+ /* GW6000 has no GPIO-controlled leds */
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 36,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .threshold = 3,
+ },
+ },
+};
+
+
+
static struct board_info __initdata board_FAST2404 = {
.name = "F@ST2404",
.expected_cpu_id = 0x6348,
@@ -1540,6 +1651,8 @@ static const struct board_info __initdat
#ifdef CONFIG_BCM63XX_CPU_6348
&board_96348r,
&board_96348gw,
+ &board_gw6000,
+ &board_gw6200,
&board_96348gw_10,
&board_96348gw_11,
&board_FAST2404,