mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-08-21 11:58:03 +03:00
Add support for revision D of the MI424WR. Rev D swaps LAN & WAN ports so this patch maintains eth0 for LAN and eth1 for WAN. For details on rev D usage, see http://wiki.openwrt.org/toh/actiontec/mi424wr Signed-off-by: Jose Vasconcellos <jvasco@verizon.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32820 3c298f89-4303-0410-b956-a3cf2f4a3e73
502 lines
13 KiB
Diff
502 lines
13 KiB
Diff
--- /dev/null
|
|
+++ b/arch/arm/mach-ixp4xx/mi424wr-pci.c
|
|
@@ -0,0 +1,71 @@
|
|
+/*
|
|
+ * arch/arm/mach-ixp4xx/mi424wr-pci.c
|
|
+ *
|
|
+ * Actiontec MI424WR board-level PCI initialization
|
|
+ *
|
|
+ * Copyright (C) 2008 Jose Vasconcellos
|
|
+ *
|
|
+ * Maintainer: Jose Vasconcellos <jvasco@verizon.net>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/pci.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/irq.h>
|
|
+
|
|
+#include <asm/mach-types.h>
|
|
+#include <asm/mach/pci.h>
|
|
+
|
|
+/* PCI controller GPIO to IRQ pin mappings
|
|
+ * This information was obtained from Actiontec's GPL release.
|
|
+ *
|
|
+ * INTA INTB
|
|
+ * SLOT 13 8 6
|
|
+ * SLOT 14 7 8
|
|
+ * SLOT 15 6 7
|
|
+ */
|
|
+
|
|
+void __init mi424wr_pci_preinit(void)
|
|
+{
|
|
+ irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
|
|
+ irq_set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
|
|
+ irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
|
|
+
|
|
+ ixp4xx_pci_preinit();
|
|
+}
|
|
+
|
|
+static int __init mi424wr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
|
|
+{
|
|
+ if (slot == 13)
|
|
+ return IRQ_IXP4XX_GPIO8;
|
|
+ if (slot == 14)
|
|
+ return IRQ_IXP4XX_GPIO7;
|
|
+ if (slot == 15)
|
|
+ return IRQ_IXP4XX_GPIO6;
|
|
+
|
|
+ return -1;
|
|
+}
|
|
+
|
|
+struct hw_pci mi424wr_pci __initdata = {
|
|
+ .nr_controllers = 1,
|
|
+ .preinit = mi424wr_pci_preinit,
|
|
+ .swizzle = pci_std_swizzle,
|
|
+ .setup = ixp4xx_setup,
|
|
+ .scan = ixp4xx_scan_bus,
|
|
+ .map_irq = mi424wr_map_irq,
|
|
+};
|
|
+
|
|
+int __init mi424wr_pci_init(void)
|
|
+{
|
|
+ if (machine_is_mi424wr())
|
|
+ pci_common_init(&mi424wr_pci);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+subsys_initcall(mi424wr_pci_init);
|
|
+
|
|
--- /dev/null
|
|
+++ b/arch/arm/mach-ixp4xx/mi424wr-setup.c
|
|
@@ -0,0 +1,380 @@
|
|
+/*
|
|
+ * arch/arm/mach-ixp4xx/mi424wr-setup.c
|
|
+ *
|
|
+ * Actiontec MI424-WR board setup
|
|
+ * Copyright (c) 2008 Jose Vasconcellos
|
|
+ *
|
|
+ * Based on Gemtek GTWX5715 by
|
|
+ * Copyright (C) 2004 George T. Joseph
|
|
+ * Derived from Coyote
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or
|
|
+ * modify it under the terms of the GNU General Public License
|
|
+ * as published by the Free Software Foundation; either version 2
|
|
+ * of the License, or (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; if not, write to the Free Software
|
|
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/device.h>
|
|
+#include <linux/serial.h>
|
|
+#include <linux/serial_8250.h>
|
|
+#include <linux/types.h>
|
|
+#include <linux/memory.h>
|
|
+#include <linux/leds.h>
|
|
+#include <linux/spi/spi_gpio_old.h>
|
|
+
|
|
+#include <asm/setup.h>
|
|
+#include <asm/irq.h>
|
|
+#include <asm/io.h>
|
|
+#include <asm/mach-types.h>
|
|
+#include <asm/mach/arch.h>
|
|
+#include <asm/mach/flash.h>
|
|
+
|
|
+/*
|
|
+ * GPIO 2,3,4 and 9 are hard wired to the Micrel/Kendin KS8995M Switch
|
|
+ * and operate as an SPI type interface. The details of the interface
|
|
+ * are available on Kendin/Micrel's web site.
|
|
+ */
|
|
+
|
|
+#define MI424WR_KSSPI_SELECT 9
|
|
+#define MI424WR_KSSPI_TXD 4
|
|
+#define MI424WR_KSSPI_CLOCK 2
|
|
+#define MI424WR_KSSPI_RXD 3
|
|
+
|
|
+/*
|
|
+ * The "reset" button is wired to GPIO 10.
|
|
+ * The GPIO is brought "low" when the button is pushed.
|
|
+ */
|
|
+
|
|
+#define MI424WR_BUTTON_GPIO 10
|
|
+#define MI424WR_BUTTON_IRQ IRQ_IXP4XX_GPIO10
|
|
+
|
|
+#define MI424WR_MOCA_WAN_LED 11
|
|
+
|
|
+/* Latch on CS1 - taken from Actiontec's 2.4 source code
|
|
+ *
|
|
+ * default latch value
|
|
+ * 0 - power alarm led (red) 0 (off)
|
|
+ * 1 - power led (green) 0 (off)
|
|
+ * 2 - wireless led (green) 1 (off)
|
|
+ * 3 - no internet led (red) 0 (off)
|
|
+ * 4 - internet ok led (green) 0 (off)
|
|
+ * 5 - moca LAN 0 (off)
|
|
+ * 6 - WAN alarm led (red) 0 (off)
|
|
+ * 7 - PCI reset 1 (not reset)
|
|
+ * 8 - IP phone 1 led (green) 1 (off)
|
|
+ * 9 - IP phone 2 led (green) 1 (off)
|
|
+ * 10 - VOIP ready led (green) 1 (off)
|
|
+ * 11 - PSTN relay 1 control 0 (PSTN)
|
|
+ * 12 - PSTN relay 1 control 0 (PSTN)
|
|
+ * 13 - N/A
|
|
+ * 14 - N/A
|
|
+ * 15 - N/A
|
|
+ */
|
|
+
|
|
+#define MI424WR_LATCH_MASK 0x04
|
|
+#define MI424WR_LATCH_DEFAULT 0x1f86
|
|
+
|
|
+#define MI424WR_LATCH_ALARM_LED 0x00
|
|
+#define MI424WR_LATCH_POWER_LED 0x01
|
|
+#define MI424WR_LATCH_WIRELESS_LED 0x02
|
|
+#define MI424WR_LATCH_INET_DOWN_LED 0x03
|
|
+#define MI424WR_LATCH_INET_OK_LED 0x04
|
|
+#define MI424WR_LATCH_MOCA_LAN_LED 0x05
|
|
+#define MI424WR_LATCH_WAN_ALARM_LED 0x06
|
|
+#define MI424WR_LATCH_PCI_RESET 0x07
|
|
+#define MI424WR_LATCH_PHONE1_LED 0x08
|
|
+#define MI424WR_LATCH_PHONE2_LED 0x09
|
|
+#define MI424WR_LATCH_VOIP_LED 0x10
|
|
+#define MI424WR_LATCH_PSTN_RELAY1 0x11
|
|
+#define MI424WR_LATCH_PSTN_RELAY2 0x12
|
|
+
|
|
+/* initialize CS1 to default timings, Intel style, 16-bit bus */
|
|
+#define MI424WR_CS1_CONFIG 0x80000002
|
|
+
|
|
+/* Define both UARTs but they are not easily accessible.
|
|
+ */
|
|
+
|
|
+static struct resource mi424wr_uart_resources[] = {
|
|
+ {
|
|
+ .start = IXP4XX_UART1_BASE_PHYS,
|
|
+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ {
|
|
+ .start = IXP4XX_UART2_BASE_PHYS,
|
|
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ }
|
|
+};
|
|
+
|
|
+
|
|
+static struct plat_serial8250_port mi424wr_uart_platform_data[] = {
|
|
+ {
|
|
+ .mapbase = IXP4XX_UART1_BASE_PHYS,
|
|
+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
|
|
+ .irq = IRQ_IXP4XX_UART1,
|
|
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
+ .iotype = UPIO_MEM,
|
|
+ .regshift = 2,
|
|
+ .uartclk = IXP4XX_UART_XTAL,
|
|
+ },
|
|
+ {
|
|
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
|
|
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
|
|
+ .irq = IRQ_IXP4XX_UART2,
|
|
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
+ .iotype = UPIO_MEM,
|
|
+ .regshift = 2,
|
|
+ .uartclk = IXP4XX_UART_XTAL,
|
|
+ },
|
|
+ { },
|
|
+};
|
|
+
|
|
+static struct platform_device mi424wr_uart_device = {
|
|
+ .name = "serial8250",
|
|
+ .id = PLAT8250_DEV_PLATFORM,
|
|
+ .dev.platform_data = mi424wr_uart_platform_data,
|
|
+ .num_resources = ARRAY_SIZE(mi424wr_uart_resources),
|
|
+ .resource = mi424wr_uart_resources,
|
|
+};
|
|
+
|
|
+static struct flash_platform_data mi424wr_flash_data = {
|
|
+ .map_name = "cfi_probe",
|
|
+ .width = 2,
|
|
+};
|
|
+
|
|
+static struct resource mi424wr_flash_resource = {
|
|
+ .flags = IORESOURCE_MEM,
|
|
+};
|
|
+
|
|
+static struct platform_device mi424wr_flash = {
|
|
+ .name = "IXP4XX-Flash",
|
|
+ .id = 0,
|
|
+ .dev.platform_data = &mi424wr_flash_data,
|
|
+ .num_resources = 1,
|
|
+ .resource = &mi424wr_flash_resource,
|
|
+};
|
|
+
|
|
+static int mi424wr_spi_boardinfo_setup(struct spi_board_info *bi,
|
|
+ struct spi_master *master, void *data)
|
|
+{
|
|
+
|
|
+ strlcpy(bi->modalias, "spi-ks8995", sizeof(bi->modalias));
|
|
+
|
|
+ bi->max_speed_hz = 5000000 /* Hz */;
|
|
+ bi->bus_num = master->bus_num;
|
|
+ bi->mode = SPI_MODE_0;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct spi_gpio_platform_data mi424wr_spi_bus_data = {
|
|
+ .pin_cs = MI424WR_KSSPI_SELECT,
|
|
+ .pin_clk = MI424WR_KSSPI_CLOCK,
|
|
+ .pin_miso = MI424WR_KSSPI_RXD,
|
|
+ .pin_mosi = MI424WR_KSSPI_TXD,
|
|
+ .cs_activelow = 1,
|
|
+ .no_spi_delay = 1,
|
|
+ .boardinfo_setup = mi424wr_spi_boardinfo_setup,
|
|
+};
|
|
+
|
|
+static struct gpio_led mi424wr_gpio_led[] = {
|
|
+ {
|
|
+ .name = "moca-wan", /* green led */
|
|
+ .gpio = MI424WR_MOCA_WAN_LED,
|
|
+ .active_low = 0,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct gpio_led_platform_data mi424wr_gpio_leds_data = {
|
|
+ .num_leds = 1,
|
|
+ .leds = mi424wr_gpio_led,
|
|
+};
|
|
+
|
|
+static struct platform_device mi424wr_gpio_leds = {
|
|
+ .name = "leds-gpio",
|
|
+ .id = -1,
|
|
+ .dev.platform_data = &mi424wr_gpio_leds_data,
|
|
+};
|
|
+
|
|
+static uint16_t latch_value = MI424WR_LATCH_DEFAULT;
|
|
+static uint16_t __iomem *iobase;
|
|
+
|
|
+static void mi424wr_latch_set_led(u8 bit, enum led_brightness value)
|
|
+{
|
|
+
|
|
+ if (((MI424WR_LATCH_MASK >> bit) & 1) ^ (value == LED_OFF))
|
|
+ latch_value &= ~(0x1 << bit);
|
|
+ else
|
|
+ latch_value |= (0x1 << bit);
|
|
+
|
|
+ __raw_writew(latch_value, iobase);
|
|
+
|
|
+}
|
|
+
|
|
+static struct latch_led mi424wr_latch_led[] = {
|
|
+ {
|
|
+ .name = "power-alarm",
|
|
+ .bit = MI424WR_LATCH_ALARM_LED,
|
|
+ },
|
|
+ {
|
|
+ .name = "power-ok",
|
|
+ .bit = MI424WR_LATCH_POWER_LED,
|
|
+ },
|
|
+ {
|
|
+ .name = "wireless", /* green led */
|
|
+ .bit = MI424WR_LATCH_WIRELESS_LED,
|
|
+ },
|
|
+ {
|
|
+ .name = "inet-down", /* red led */
|
|
+ .bit = MI424WR_LATCH_INET_DOWN_LED,
|
|
+ },
|
|
+ {
|
|
+ .name = "inet-up", /* green led */
|
|
+ .bit = MI424WR_LATCH_INET_OK_LED,
|
|
+ },
|
|
+ {
|
|
+ .name = "moca-lan", /* green led */
|
|
+ .bit = MI424WR_LATCH_MOCA_LAN_LED,
|
|
+ },
|
|
+ {
|
|
+ .name = "wan-alarm", /* red led */
|
|
+ .bit = MI424WR_LATCH_WAN_ALARM_LED,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct latch_led_platform_data mi424wr_latch_leds_data = {
|
|
+ .num_leds = ARRAY_SIZE(mi424wr_latch_led),
|
|
+ .mem = 0x51000000,
|
|
+ .leds = mi424wr_latch_led,
|
|
+ .set_led = mi424wr_latch_set_led,
|
|
+};
|
|
+
|
|
+static struct platform_device mi424wr_latch_leds = {
|
|
+ .name = "leds-latch",
|
|
+ .id = -1,
|
|
+ .dev.platform_data = &mi424wr_latch_leds_data,
|
|
+};
|
|
+
|
|
+static struct platform_device mi424wr_spi_bus = {
|
|
+ .name = "spi-gpio",
|
|
+ .id = 0,
|
|
+ .dev.platform_data = &mi424wr_spi_bus_data,
|
|
+};
|
|
+
|
|
+static struct eth_plat_info mi424wr_wan_data = {
|
|
+ .phy = 17, /* KS8721 */
|
|
+ .rxq = 3,
|
|
+ .txreadyq = 20,
|
|
+};
|
|
+
|
|
+static struct eth_plat_info mi424wr_lan_data = {
|
|
+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
|
|
+ .phy_mask = 0x1e, /* ports 1-4 of the KS8995 switch */
|
|
+ .rxq = 4,
|
|
+ .txreadyq = 21,
|
|
+};
|
|
+
|
|
+static struct platform_device mi424wr_npe_devices[] = {
|
|
+ {
|
|
+ .name = "ixp4xx_eth",
|
|
+ .id = IXP4XX_ETH_NPEC,
|
|
+ .dev.platform_data = &mi424wr_lan_data,
|
|
+ }, {
|
|
+ .name = "ixp4xx_eth",
|
|
+ .id = IXP4XX_ETH_NPEB,
|
|
+ .dev.platform_data = &mi424wr_wan_data,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct eth_plat_info mi424wr_wanD_data = {
|
|
+ .phy = 5,
|
|
+ .rxq = 4,
|
|
+ .txreadyq = 21,
|
|
+};
|
|
+
|
|
+static struct eth_plat_info mi424wr_lanD_data = {
|
|
+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
|
|
+ .phy_mask = 0x1e, /* ports 1-4 of the KS8995 switch */
|
|
+ .rxq = 3,
|
|
+ .txreadyq = 20,
|
|
+};
|
|
+
|
|
+static struct platform_device mi424wr_npeD_devices[] = {
|
|
+ {
|
|
+ .name = "ixp4xx_eth",
|
|
+ .id = IXP4XX_ETH_NPEB,
|
|
+ .dev.platform_data = &mi424wr_lanD_data,
|
|
+ }, {
|
|
+ .name = "ixp4xx_eth",
|
|
+ .id = IXP4XX_ETH_NPEC,
|
|
+ .dev.platform_data = &mi424wr_wanD_data,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct platform_device *mi424wr_devices[] __initdata = {
|
|
+ &mi424wr_uart_device,
|
|
+ &mi424wr_flash,
|
|
+ &mi424wr_gpio_leds,
|
|
+ &mi424wr_latch_leds,
|
|
+ &mi424wr_spi_bus,
|
|
+};
|
|
+
|
|
+static void __init mi424wr_init(void)
|
|
+{
|
|
+ ixp4xx_sys_init();
|
|
+
|
|
+ mi424wr_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
|
|
+ mi424wr_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
|
|
+
|
|
+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
|
|
+ *IXP4XX_EXP_CS1 = MI424WR_CS1_CONFIG;
|
|
+
|
|
+ /* configure button as input
|
|
+ */
|
|
+ gpio_line_config(MI424WR_BUTTON_GPIO, IXP4XX_GPIO_IN);
|
|
+
|
|
+ /* Initialize LEDs and enables PCI bus.
|
|
+ */
|
|
+ iobase = ioremap_nocache(IXP4XX_EXP_BUS_BASE(1), 0x1000);
|
|
+ __raw_writew(latch_value, iobase);
|
|
+
|
|
+ platform_add_devices(mi424wr_devices, ARRAY_SIZE(mi424wr_devices));
|
|
+
|
|
+ /* Need to figure out how to detect revD.
|
|
+ * Look for a revision argument sent by redboot.
|
|
+ */
|
|
+#define revD 4
|
|
+ if (system_rev == revD) {
|
|
+ platform_device_register(&mi424wr_npeD_devices[0]);
|
|
+ platform_device_register(&mi424wr_npeD_devices[1]);
|
|
+ } else {
|
|
+ platform_device_register(&mi424wr_npe_devices[0]);
|
|
+ platform_device_register(&mi424wr_npe_devices[1]);
|
|
+ }
|
|
+}
|
|
+
|
|
+
|
|
+MACHINE_START(MI424WR, "Actiontec MI424WR")
|
|
+ /* Maintainer: Jose Vasconcellos */
|
|
+ .map_io = ixp4xx_map_io,
|
|
+ .init_irq = ixp4xx_init_irq,
|
|
+ .timer = &ixp4xx_timer,
|
|
+ .atag_offset = 0x0100,
|
|
+ .init_machine = mi424wr_init,
|
|
+#if defined(CONFIG_PCI)
|
|
+ .dma_zone_size = SZ_64M,
|
|
+#endif
|
|
+MACHINE_END
|
|
+
|
|
--- a/arch/arm/mach-ixp4xx/Makefile
|
|
+++ b/arch/arm/mach-ixp4xx/Makefile
|
|
@@ -25,6 +25,7 @@ obj-pci-$(CONFIG_MACH_COMPEX) += ixdp42
|
|
obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
|
|
obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
|
|
obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
|
|
+obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o
|
|
|
|
obj-y += common.o
|
|
|
|
@@ -51,6 +52,7 @@ obj-$(CONFIG_MACH_COMPEX) += compex-setu
|
|
obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
|
|
obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
|
|
obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
|
|
+obj-$(CONFIG_MACH_MI424WR) += mi424wr-setup.o
|
|
|
|
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
|
|
obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
|
|
--- a/arch/arm/mach-ixp4xx/Kconfig
|
|
+++ b/arch/arm/mach-ixp4xx/Kconfig
|
|
@@ -262,6 +262,13 @@ config MACH_MIC256
|
|
Say 'Y' here if you want your kernel to support the MIC256
|
|
board from OMICRON electronics GmbH.
|
|
|
|
+config MACH_MI424WR
|
|
+ bool "Actiontec MI424WR"
|
|
+ depends on ARCH_IXP4XX
|
|
+ select PCI
|
|
+ help
|
|
+ Add support for the Actiontec MI424-WR.
|
|
+
|
|
comment "IXP4xx Options"
|
|
|
|
config IXP4XX_INDIRECT_PCI
|
|
--- a/arch/arm/configs/ixp4xx_defconfig
|
|
+++ b/arch/arm/configs/ixp4xx_defconfig
|
|
@@ -26,6 +26,7 @@ CONFIG_MACH_NAS100D=y
|
|
CONFIG_MACH_DSMG600=y
|
|
CONFIG_MACH_FSG=y
|
|
CONFIG_MACH_GTWX5715=y
|
|
+CONFIG_MACH_MI424WR=y
|
|
CONFIG_IXP4XX_QMGR=y
|
|
CONFIG_IXP4XX_NPE=y
|
|
# CONFIG_ARM_THUMB is not set
|