1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-18 12:25:54 +02:00
openwrt-xburst/target/linux/brcm63xx/patches-3.3/526-board_CT6373-1.patch
florian b0104112b7 [brcm63xx] nb4: fix support, add support for SVC and CLIP BTN
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33156 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-13 09:55:04 +00:00

137 lines
3.0 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -51,6 +51,13 @@
#define NB4_SPI_GPIO_CLK 6
#define NB4_74HC64_GPIO(X) (NB4_74X164_GPIO_BASE + (X))
+#define CT6373_PID_OFFSET 0xff80
+#define CT6373_74X164_GPIO_BASE 64
+#define CT6373_SPI_GPIO_MOSI 7
+#define CT6373_SPI_GPIO_CLK 6
+#define CT6373_74HC64_GPIO(X) (CT6373_74X164_GPIO_BASE + (X))
+
+
static struct board_info board;
/*
@@ -2261,6 +2268,111 @@ static struct board_info __initdata boar
.num_spis = ARRAY_SIZE(nb4_spi_devices),
};
+
+struct spi_gpio_platform_data ct6373_spi_gpio_data = {
+ .sck = CT6373_SPI_GPIO_CLK,
+ .mosi = CT6373_SPI_GPIO_MOSI,
+ .miso = SPI_GPIO_NO_MISO,
+ .num_chipselect = 1,
+};
+
+static struct platform_device ct6373_spi_gpio = {
+ .name = "spi_gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &ct6373_spi_gpio_data,
+ },
+};
+
+static struct platform_device * __initdata ct6373_devices[] = {
+ &ct6373_spi_gpio,
+};
+
+const struct gen_74x164_chip_platform_data ct6373_74x164_platform_data = {
+ .base = CT6373_74X164_GPIO_BASE
+};
+
+static struct spi_board_info ct6373_spi_devices[] = {
+ {
+ .modalias = "74x164",
+ .max_speed_hz = 781000,
+ .bus_num = 1,
+ .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
+ .mode = SPI_MODE_0,
+ .platform_data = &ct6373_74x164_platform_data
+ }
+};
+
+static struct board_info __initdata board_ct6373_1 = {
+ .name = "CT6373-1",
+ .expected_cpu_id = 0x6358,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .leds = {
+ {
+ .name = "CT6373-1:green:power",
+ .gpio = 0,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "CT6373-1:green:usb",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "CT6373-1:green:wlan",
+ .gpio = 9,
+ .active_low = 1,
+ },
+ {
+ .name = "CT6373-1:green:adsl",
+ .gpio = CT6373_74HC64_GPIO(0),
+ .active_low = 1,
+ },
+ {
+ .name = "CT6373-1:green:line",
+ .gpio = CT6373_74HC64_GPIO(1),
+ .active_low = 1,
+ },
+ {
+ .name = "CT6373-1:green:fxs1",
+ .gpio = CT6373_74HC64_GPIO(2),
+ .active_low = 1,
+ },
+ {
+ .name = "CT6373-1:green:fxs2",
+ .gpio = CT6373_74HC64_GPIO(3),
+ .active_low = 1,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 35,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+
+ .devs = ct6373_devices,
+ .num_devs = ARRAY_SIZE(ct6373_devices),
+ .spis = ct6373_spi_devices,
+ .num_spis = ARRAY_SIZE(ct6373_spi_devices),
+};
+
static struct board_info __initdata board_HW553 = {
.name = "HW553",
.expected_cpu_id = 0x6358,
@@ -2592,6 +2704,7 @@ static const struct board_info __initdat
&board_nb4_ser_r2,
&board_nb4_fxc_r1,
&board_nb4_fxc_r2,
+ &board_ct6373_1,
&board_HW553,
&board_spw303v,
#endif