1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-20 17:10:36 +02:00
openwrt-xburst/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr2543n.c
juhosg 7bc411c5d9 ar71xx: boost SPI flash read performance
mtd_speedtest results:
                           page read speed
                    old         new        delta
DB120            929 KiB/s   2597 KiB/s   +179.55%
TL-WR1043ND v1   754 KiB/s   2166 KiB/s   +187.27%
TL-WR703N v1     745 KiB/s   2176 KiB/s   +192.08%
TL-MR3220 v1     752 KiB/s   2154 KiB/s   +186.44%
TL-WR2543ND v1   564 KiB/s   2130 KiB/s   +277.66%
TL-WR741ND v2    525 KiB/s   1767 KiB/s   +236.57%
ALFA-AP96        702 KiB/s   1977 KiB/s   +181.62%
WNDR3700         697 KiB/s   1965 KiB/s   +181.92%

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27 19:38:17 +00:00

131 lines
3.3 KiB
C

/*
* TP-LINK TL-WR2543N/ND board support
*
* Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/rtl8367.h>
#include <asm/mach-ath79/ath79.h>
#include "dev-eth.h"
#include "dev-ap9x-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#include "machtypes.h"
#define TL_WR2543N_GPIO_LED_WPS 0
#define TL_WR2543N_GPIO_LED_USB 8
#define TL_WR2543N_GPIO_BTN_RESET 11
#define TL_WR2543N_GPIO_BTN_WPS 12
#define TL_WR2543N_GPIO_RTL8367_SDA 1
#define TL_WR2543N_GPIO_RTL8367_SCK 6
#define TL_WR2543N_KEYS_POLL_INTERVAL 20 /* msecs */
#define TL_WR2543N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR2543N_KEYS_POLL_INTERVAL)
static const char *tl_wr2543n_part_probes[] = {
"tp-link",
NULL,
};
static struct flash_platform_data tl_wr2543n_flash_data = {
.part_probes = tl_wr2543n_part_probes,
};
static struct gpio_led tl_wr2543n_leds_gpio[] __initdata = {
{
.name = "tp-link:green:usb",
.gpio = TL_WR2543N_GPIO_LED_USB,
.active_low = 1,
}, {
.name = "tp-link:green:wps",
.gpio = TL_WR2543N_GPIO_LED_WPS,
.active_low = 1,
}
};
static struct gpio_keys_button tl_wr2543n_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL,
.gpio = TL_WR2543N_GPIO_BTN_RESET,
.active_low = 1,
}, {
.desc = "wps",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL,
.gpio = TL_WR2543N_GPIO_BTN_WPS,
.active_low = 1,
}
};
static struct rtl8367_extif_config tl_wr2543n_rtl8367_extif0_cfg = {
.mode = RTL8367_EXTIF_MODE_RGMII,
.txdelay = 1,
.rxdelay = 0,
.ability = {
.force_mode = 1,
.txpause = 1,
.rxpause = 1,
.link = 1,
.duplex = 1,
.speed = RTL8367_PORT_SPEED_1000,
},
};
static struct rtl8367_platform_data tl_wr2543n_rtl8367_data = {
.gpio_sda = TL_WR2543N_GPIO_RTL8367_SDA,
.gpio_sck = TL_WR2543N_GPIO_RTL8367_SCK,
.extif0_cfg = &tl_wr2543n_rtl8367_extif0_cfg,
};
static struct platform_device tl_wr2543n_rtl8367_device = {
.name = RTL8367_DRIVER_NAME,
.id = -1,
.dev = {
.platform_data = &tl_wr2543n_rtl8367_data,
}
};
static void __init tl_wr2543n_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
ath79_register_m25p80(&tl_wr2543n_flash_data);
ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr2543n_leds_gpio),
tl_wr2543n_leds_gpio);
ath79_register_gpio_keys_polled(-1, TL_WR2543N_KEYS_POLL_INTERVAL,
ARRAY_SIZE(tl_wr2543n_gpio_keys),
tl_wr2543n_gpio_keys);
ath79_register_usb();
ap91_pci_init(eeprom, mac);
ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
ath79_eth0_data.mii_bus_dev = &tl_wr2543n_rtl8367_device.dev;
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.speed = SPEED_1000;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_pll_data.pll_1000 = 0x1a000000;
ath79_register_eth(0);
platform_device_register(&tl_wr2543n_rtl8367_device);
}
MIPS_MACHINE(ATH79_MACH_TL_WR2543N, "TL-WR2543N", "TP-LINK TL-WR2543N/ND",
tl_wr2543n_setup);