qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-19 09:39:47 +02:00
Code
abafc3e8e3
openwrt-xburst/target/linux/etrax-2.6/patches/cris/003-drivers-cris.patch
blogic 9b11307b07 add initial support for the crisarchitecture used on foxboards to openwrt 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7439 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-06-02 00:46:02 +00:00

22602 lines
704 KiB
Diff
Raw Blame History

diff -urN linux-2.6.19.2.orig/drivers/ide/cris/ide-cris.c linux-2.6.19.2.dev/drivers/ide/cris/ide-cris.c
--- linux-2.6.19.2.orig/drivers/ide/cris/ide-cris.c 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2.dev/drivers/ide/cris/ide-cris.c 2006-12-06 14:17:02.000000000 +0100
@@ -1,8 +1,8 @@
-/* $Id: cris-ide-driver.patch,v 1.1 2005/06/29 21:39:07 akpm Exp $
+/* $Id: ide-cris.c,v 1.10 2006/12/06 13:17:02 starvik Exp $
*
* Etrax specific IDE functions, like init and PIO-mode setting etc.
* Almost the entire ide.c is used for the rest of the Etrax ATA driver.
- * Copyright (c) 2000-2005 Axis Communications AB
+ * Copyright (c) 2000-2006 Axis Communications AB
*
* Authors: Bjorn Wesen (initial version)
* Mikael Starvik (crisv32 port)
@@ -43,8 +43,8 @@
#define IDE_REGISTER_TIMEOUT 300
-#define LOWDB(x)
-#define D(x)
+#define LOWDB(x)
+#define D(x)
enum /* Transfer types */
{
@@ -88,12 +88,50 @@
#define ATA_PIO0_STROBE 39
#define ATA_PIO0_HOLD 9
-int
+/*
+ * On ETRAX FS, an interrupt remains latched and active until ack:ed.
+ * Further, ATA acks are without effect as long as INTRQ is asserted, as the
+ * corresponding ATA interrupt is continuously set to active. There will be a
+ * clearing ack at the usual cris_ide_ack_intr call, but that serves just to
+ * gracefully handle an actual spurious interrupt or similar situation (which
+ * will cause an early return without further actions, see the ide_intr
+ * function).
+ *
+ * However, the normal case at time of this writing is that nothing has
+ * changed from when INTRQ was asserted until the cris_ide_ack_intr call; no
+ * ATA registers written and no status register read, so INTRQ will *remain*
+ * asserted, thus *another* interrupt will be latched, and will be seen as a
+ * spurious interrupt after the "real" interrupt is serviced. With lots of
+ * ATA traffic (as in a trivial file-copy between two drives), this will trig
+ * the condition desc->irqs_unhandled > 99900 in
+ * kernel/irq/spurious.c:note_interrupt and the system will halt.
+ *
+ * To actually get rid of the interrupt corresponding to the current INTRQ
+ * assertion, we make a second ack after the next ATA register read or write;
+ * i.e. when INTRQ must be deasserted. At that time, we don't have the hwif
+ * pointer available, so we need to stash a local copy (safe, because it'll be
+ * set and cleared within the same spin_lock_irqsave region). The pointer
+ * serves doubly as a boolean flag that an ack is needed. The caller must
+ * NULL the pointer after the "second ack".
+ */
+
+static ide_hwif_t *hwif_to_ack;
+
+static int
cris_ide_ack_intr(ide_hwif_t* hwif)
{
- reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2,
+ /*
+ * The interrupt is shared so we need to find the interface bit number
+ * to ack. We define the ATA I/O register addresses to have the
+ * format of ata rw_ctrl2 register contents, conveniently holding this
+ * number.
+ */
+ reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2,
int, hwif->io_ports[0]);
REG_WR_INT(ata, regi_ata, rw_ack_intr, 1 << ctrl2.sel);
+
+ /* Prepare to ack again, see above. */
+ hwif_to_ack = hwif;
return 1;
}
@@ -122,8 +160,24 @@
static void
cris_ide_write_command(unsigned long command)
-{
+{
REG_WR_INT(ata, regi_ata, rw_ctrl2, command); /* write data to the drive's register */
+
+ /*
+ * Perform a pending ack if needed; see hwif_ack definition. Perhaps
+ * we should check closer that this call is really a part of the
+ * preparation to read the ATA status register or write to the ATA
+ * command register (causing deassert of INTRQ; see the ATA standard),
+ * but at time of this writing (and expected to sanely remain so), the
+ * first ATA register activity after an cris_ide_ack_intr call is
+ * certain to do exactly that.
+ */
+ if (hwif_to_ack) {
+ /* The drive may take this long to deassert INTRQ. */
+ ndelay(400);
+ cris_ide_ack_intr(hwif_to_ack);
+ hwif_to_ack = NULL;
+ }
}
static void
@@ -160,8 +214,8 @@
{
reg_ata_rw_ctrl2 ctrl2 = {0};
ctrl2.addr = addr;
- ctrl2.cs1 = cs1;
- ctrl2.cs0 = cs0;
+ ctrl2.cs1 = !cs1;
+ ctrl2.cs0 = !cs0;
return REG_TYPE_CONV(int, reg_ata_rw_ctrl2, ctrl2);
}
@@ -184,14 +238,14 @@
intr_mask.bus0 = regk_ata_yes;
intr_mask.bus1 = regk_ata_yes;
- intr_mask.bus2 = regk_ata_yes;
+ intr_mask.bus2 = regk_ata_yes;
intr_mask.bus3 = regk_ata_yes;
REG_WR(ata, regi_ata, rw_intr_mask, intr_mask);
crisv32_request_dma(2, "ETRAX FS built-in ATA", DMA_VERBOSE_ON_ERROR, 0, dma_ata);
crisv32_request_dma(3, "ETRAX FS built-in ATA", DMA_VERBOSE_ON_ERROR, 0, dma_ata);
-
+
crisv32_pinmux_alloc_fixed(pinmux_ata);
crisv32_pinmux_alloc_fixed(pinmux_ata0);
crisv32_pinmux_alloc_fixed(pinmux_ata1);
@@ -204,14 +258,15 @@
DMA_ENABLE(regi_dma3);
DMA_WR_CMD (regi_dma2, regk_dma_set_w_size2);
- DMA_WR_CMD (regi_dma3, regk_dma_set_w_size2);
+ DMA_WR_CMD (regi_dma3, regk_dma_set_w_size2);
}
static dma_descr_context mycontext __attribute__ ((__aligned__(32)));
#define cris_dma_descr_type dma_descr_data
-#define cris_pio_read regk_ata_rd
-#define cris_ultra_mask 0x7
+#define cris_pio_read (regk_ata_rd << 24)
+#define cris_ultra_mask 0x0 /* 0x7 for UDMA */
+#define IRQ ATA_INTR_VECT
#define MAX_DESCR_SIZE 0xffffffffUL
static unsigned long
@@ -226,6 +281,8 @@
d->buf = (char*)virt_to_phys(buf);
d->after = d->buf + len;
d->eol = last;
+ /* assume descriptors are consecutively placed in memory */
+ d->next = last ? 0 : (cris_dma_descr_type*)virt_to_phys(d+1);
}
static void
@@ -237,8 +294,10 @@
mycontext.saved_data = (dma_descr_data*)virt_to_phys(d);
mycontext.saved_data_buf = d->buf;
/* start the dma channel */
+ if (dir)
+ flush_dma_context(&mycontext); // Cache bug workaround
DMA_START_CONTEXT(dir ? regi_dma3 : regi_dma2, virt_to_phys(&mycontext));
-
+
/* initiate a multi word dma read using PIO handshaking */
trf_cnt.cnt = len >> 1;
/* Due to a "feature" the transfer count has to be one extra word for UDMA. */
@@ -248,7 +307,7 @@
ctrl2.rw = dir ? regk_ata_rd : regk_ata_wr;
ctrl2.trf_mode = regk_ata_dma;
- ctrl2.hsh = type == TYPE_PIO ? regk_ata_pio :
+ ctrl2.hsh = type == TYPE_PIO ? regk_ata_pio :
type == TYPE_DMA ? regk_ata_dma : regk_ata_udma;
ctrl2.multi = regk_ata_yes;
ctrl2.dma_size = regk_ata_word;
@@ -339,7 +398,7 @@
#define ATA_PIO0_STROBE 19
#define ATA_PIO0_HOLD 4
-int
+int
cris_ide_ack_intr(ide_hwif_t* hwif)
{
return 1;
@@ -348,13 +407,13 @@
static inline int
cris_ide_busy(void)
{
- return *R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, busy) ;
+ return *R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, busy) ;
}
static inline int
cris_ide_ready(void)
{
- return *R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, tr_rdy) ;
+ return *R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, tr_rdy) ;
}
static inline int
@@ -364,12 +423,12 @@
*data = (unsigned short)status;
return status & IO_MASK(R_ATA_STATUS_DATA, dav);
}
-
+
static void
cris_ide_write_command(unsigned long command)
{
- *R_ATA_CTRL_DATA = command;
-}
+ *R_ATA_CTRL_DATA = command;
+}
static void
cris_ide_set_speed(int type, int setup, int strobe, int hold)
@@ -406,8 +465,8 @@
cris_ide_reg_addr(unsigned long addr, int cs0, int cs1)
{
return IO_FIELD(R_ATA_CTRL_DATA, addr, addr) |
- IO_FIELD(R_ATA_CTRL_DATA, cs0, cs0) |
- IO_FIELD(R_ATA_CTRL_DATA, cs1, cs1);
+ IO_FIELD(R_ATA_CTRL_DATA, cs0, cs0 ? 0 : 1) |
+ IO_FIELD(R_ATA_CTRL_DATA, cs1, cs1 ? 0 : 1);
}
static __init void
@@ -484,6 +543,7 @@
#define cris_dma_descr_type etrax_dma_descr
#define cris_pio_read IO_STATE(R_ATA_CTRL_DATA, rw, read)
#define cris_ultra_mask 0x0
+#define IRQ 4
#define MAX_DESCR_SIZE 0x10000UL
static unsigned long
@@ -497,8 +557,8 @@
{
d->buf = virt_to_phys(buf);
d->sw_len = len == MAX_DESCR_SIZE ? 0 : len;
- if (last)
- d->ctrl |= d_eol;
+ d->ctrl = last ? d_eol : 0;
+ d->next = last ? 0 : virt_to_phys(d+1); /* assumes descr's in array */
}
static void cris_ide_start_dma(ide_drive_t *drive, cris_dma_descr_type *d, int dir, int type, int len)
@@ -521,14 +581,14 @@
*R_DMA_CH2_FIRST = virt_to_phys(d);
*R_DMA_CH2_CMD = IO_STATE(R_DMA_CH2_CMD, cmd, start);
}
-
+
/* initiate a multi word dma read using DMA handshaking */
*R_ATA_TRANSFER_CNT =
IO_FIELD(R_ATA_TRANSFER_CNT, count, len >> 1);
cmd = dir ? IO_STATE(R_ATA_CTRL_DATA, rw, read) : IO_STATE(R_ATA_CTRL_DATA, rw, write);
- cmd |= type == TYPE_PIO ? IO_STATE(R_ATA_CTRL_DATA, handsh, pio) :
+ cmd |= type == TYPE_PIO ? IO_STATE(R_ATA_CTRL_DATA, handsh, pio) :
IO_STATE(R_ATA_CTRL_DATA, handsh, dma);
*R_ATA_CTRL_DATA =
cmd |
@@ -570,7 +630,7 @@
}
#endif
-
+
void
cris_ide_outw(unsigned short data, unsigned long reg) {
int timeleft;
@@ -597,7 +657,7 @@
if(!timeleft)
printk("ATA timeout reg 0x%lx := 0x%x\n", reg, data);
- cris_ide_write_command(reg|data); /* write data to the drive's register */
+ cris_ide_write_command(reg|data); /* write data to the drive's register */
timeleft = IDE_REGISTER_TIMEOUT;
/* wait for transmitter ready */
@@ -684,13 +744,15 @@
static void cris_atapi_output_bytes(ide_drive_t *drive, void *, unsigned int);
static int cris_dma_off (ide_drive_t *drive);
static int cris_dma_on (ide_drive_t *drive);
+static int cris_dma_host_off (ide_drive_t *drive);
+static int cris_dma_host_on (ide_drive_t *drive);
static void tune_cris_ide(ide_drive_t *drive, u8 pio)
{
int setup, strobe, hold;
switch(pio)
- {
+ {
case 0:
setup = ATA_PIO0_SETUP;
strobe = ATA_PIO0_STROBE;
@@ -715,7 +777,7 @@
setup = ATA_PIO4_SETUP;
strobe = ATA_PIO4_STROBE;
hold = ATA_PIO4_HOLD;
- break;
+ break;
default:
return;
}
@@ -733,7 +795,7 @@
}
switch(speed)
- {
+ {
case XFER_UDMA_0:
cyc = ATA_UDMA0_CYC;
dvs = ATA_UDMA0_DVS;
@@ -765,7 +827,7 @@
if (speed >= XFER_UDMA_0)
cris_ide_set_speed(TYPE_UDMA, cyc, dvs, 0);
else
- cris_ide_set_speed(TYPE_DMA, 0, strobe, hold);
+ cris_ide_set_speed(TYPE_DMA, 0, strobe, hold);
return 0;
}
@@ -790,11 +852,13 @@
for(h = 0; h < MAX_HWIFS; h++) {
ide_hwif_t *hwif = &ide_hwifs[h];
- ide_setup_ports(&hw, cris_ide_base_address(h),
+ memset(&hw, 0, sizeof(hw));
+ ide_setup_ports(&hw, cris_ide_base_address(h),
ide_offsets,
0, 0, cris_ide_ack_intr,
- ide_default_irq(0));
+ IRQ);
ide_register_hw(&hw, &hwif);
+ hwif->irq = IRQ;
hwif->mmio = 2;
hwif->chipset = ide_etrax100;
hwif->tuneproc = &tune_cris_ide;
@@ -814,13 +878,15 @@
hwif->OUTBSYNC = &cris_ide_outbsync;
hwif->INB = &cris_ide_inb;
hwif->INW = &cris_ide_inw;
- hwif->ide_dma_host_off = &cris_dma_off;
- hwif->ide_dma_host_on = &cris_dma_on;
+ hwif->ide_dma_host_off = &cris_dma_host_off;
+ hwif->ide_dma_host_on = &cris_dma_host_on;
hwif->ide_dma_off_quietly = &cris_dma_off;
+ hwif->ide_dma_on = &cris_dma_on;
hwif->udma_four = 0;
hwif->ultra_mask = cris_ultra_mask;
hwif->mwdma_mask = 0x07; /* Multiword DMA 0-2 */
hwif->swdma_mask = 0x07; /* Singleword DMA 0-2 */
+ hwif->rqsize = 256;
}
/* Reset pulse */
@@ -835,13 +901,25 @@
cris_ide_set_speed(TYPE_UDMA, ATA_UDMA2_CYC, ATA_UDMA2_DVS, 0);
}
+static int cris_dma_host_off (ide_drive_t *drive)
+{
+ return 0;
+}
+
+static int cris_dma_host_on (ide_drive_t *drive)
+{
+ return 0;
+}
+
static int cris_dma_off (ide_drive_t *drive)
{
+ drive->using_dma = 0;
return 0;
}
static int cris_dma_on (ide_drive_t *drive)
{
+ drive->using_dma = 1;
return 0;
}
@@ -958,30 +1036,28 @@
size += sg_dma_len(sg);
}
- /* did we run out of descriptors? */
-
- if(count >= MAX_DMA_DESCRS) {
- printk("%s: too few DMA descriptors\n", drive->name);
- return 1;
- }
-
- /* however, this case is more difficult - rw_trf_cnt cannot be more
- than 65536 words per transfer, so in that case we need to either
+ /* rw_trf_cnt cannot be more than 131072 words per transfer,
+ (- 1 word for UDMA CRC) so in that case we need to either:
1) use a DMA interrupt to re-trigger rw_trf_cnt and continue with
the descriptors, or
2) simply do the request here, and get dma_intr to only ide_end_request on
those blocks that were actually set-up for transfer.
+ (The ide framework will issue a new request for the remainder)
*/
- if(ata_tot_size + size > 131072) {
+ if(ata_tot_size + size > 262140) {
printk("too large total ATA DMA request, %d + %d!\n", ata_tot_size, (int)size);
return 1;
}
- /* If size > MAX_DESCR_SIZE it has to be splitted into new descriptors. Since we
- don't handle size > 131072 only one split is necessary */
+ /* If size > MAX_DESCR_SIZE it has to be splitted into new descriptors. */
- if(size > MAX_DESCR_SIZE) {
+ while (size > MAX_DESCR_SIZE) {
+ /* did we run out of descriptors? */
+ if(count >= MAX_DMA_DESCRS) {
+ printk("%s: too few DMA descriptors\n", drive->name);
+ return 1;
+ }
cris_ide_fill_descriptor(&ata_descrs[count], (void*)addr, MAX_DESCR_SIZE, 0);
count++;
ata_tot_size += MAX_DESCR_SIZE;
@@ -989,6 +1065,11 @@
addr += MAX_DESCR_SIZE;
}
+ /* did we run out of descriptors? */
+ if(count >= MAX_DMA_DESCRS) {
+ printk("%s: too few DMA descriptors\n", drive->name);
+ return 1;
+ }
cris_ide_fill_descriptor(&ata_descrs[count], (void*)addr, size,i ? 0 : 1);
count++;
ata_tot_size += size;
@@ -1050,8 +1131,12 @@
if (id && (id->capability & 1)) {
if (ide_use_dma(drive)) {
- if (cris_config_drive_for_dma(drive))
- return hwif->ide_dma_on(drive);
+ if (cris_config_drive_for_dma(drive)) {
+ if (hwif->ide_dma_on)
+ return hwif->ide_dma_on(drive);
+ else
+ return 1;
+ }
}
}
--- linux-2.6.19.2.orig/drivers/serial/crisv10.c 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2.dev/drivers/serial/crisv10.c 2007-01-09 10:30:54.000000000 +0100
@@ -2,7 +2,7 @@
*
* Serial port driver for the ETRAX 100LX chip
*
- * Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003 Axis Communications AB
+ * Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004 Axis Communications AB
*
* Many, many authors. Based once upon a time on serial.c for 16x50.
*
@@ -445,6 +445,7 @@
#include <asm/io.h>
#include <asm/irq.h>
+#include <asm/dma.h>
#include <asm/system.h>
#include <asm/bitops.h>
#include <linux/delay.h>
@@ -454,8 +455,9 @@
/* non-arch dependent serial structures are in linux/serial.h */
#include <linux/serial.h>
/* while we keep our own stuff (struct e100_serial) in a local .h file */
-#include "serial.h"
+#include "crisv10.h"
#include <asm/fasttimer.h>
+#include <asm/arch/io_interface_mux.h>
#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
#ifndef CONFIG_ETRAX_FAST_TIMER
@@ -586,11 +588,10 @@
static void change_speed(struct e100_serial *info);
static void rs_throttle(struct tty_struct * tty);
static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
-static int rs_write(struct tty_struct * tty, int from_user,
+static int rs_write(struct tty_struct * tty,
const unsigned char *buf, int count);
#ifdef CONFIG_ETRAX_RS485
-static int e100_write_rs485(struct tty_struct * tty, int from_user,
- const unsigned char *buf, int count);
+static int e100_write_rs485(struct tty_struct * tty, const unsigned char *buf, int count);
#endif
static int get_lsr_info(struct e100_serial * info, unsigned int *value);
@@ -677,20 +678,39 @@
.rx_ctrl = DEF_RX,
.tx_ctrl = DEF_TX,
.iseteop = 2,
+ .dma_owner = dma_ser0,
+ .io_if = if_serial_0,
#ifdef CONFIG_ETRAX_SERIAL_PORT0
.enabled = 1,
#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
.dma_out_enabled = 1,
+ .dma_out_nbr = SER0_TX_DMA_NBR,
+ .dma_out_irq_nbr = SER0_DMA_TX_IRQ_NBR,
+ .dma_out_irq_flags = IRQF_DISABLED,
+ .dma_out_irq_description = "serial 0 dma tr",
#else
.dma_out_enabled = 0,
+ .dma_out_nbr = UINT_MAX,
+ .dma_out_irq_nbr = 0,
+ .dma_out_irq_flags = 0,
+ .dma_out_irq_description = NULL,
#endif
#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
.dma_in_enabled = 1,
+ .dma_in_nbr = SER0_RX_DMA_NBR,
+ .dma_in_irq_nbr = SER0_DMA_RX_IRQ_NBR,
+ .dma_in_irq_flags = IRQF_DISABLED,
+ .dma_in_irq_description = "serial 0 dma rec",
#else
- .dma_in_enabled = 0
+ .dma_in_enabled = 0,
+ .dma_in_nbr = UINT_MAX,
+ .dma_in_irq_nbr = 0,
+ .dma_in_irq_flags = 0,
+ .dma_in_irq_description = NULL,
#endif
#else
.enabled = 0,
+ .io_if_description = NULL,
.dma_out_enabled = 0,
.dma_in_enabled = 0
#endif
@@ -712,20 +732,42 @@
.rx_ctrl = DEF_RX,
.tx_ctrl = DEF_TX,
.iseteop = 3,
+ .dma_owner = dma_ser1,
+ .io_if = if_serial_1,
#ifdef CONFIG_ETRAX_SERIAL_PORT1
.enabled = 1,
+ .io_if_description = "ser1",
#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT
.dma_out_enabled = 1,
+ .dma_out_nbr = SER1_TX_DMA_NBR,
+ .dma_out_irq_nbr = SER1_DMA_TX_IRQ_NBR,
+ .dma_out_irq_flags = IRQF_DISABLED,
+ .dma_out_irq_description = "serial 1 dma tr",
#else
.dma_out_enabled = 0,
+ .dma_out_nbr = UINT_MAX,
+ .dma_out_irq_nbr = 0,
+ .dma_out_irq_flags = 0,
+ .dma_out_irq_description = NULL,
#endif
#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN
.dma_in_enabled = 1,
+ .dma_in_nbr = SER1_RX_DMA_NBR,
+ .dma_in_irq_nbr = SER1_DMA_RX_IRQ_NBR,
+ .dma_in_irq_flags = IRQF_DISABLED,
+ .dma_in_irq_description = "serial 1 dma rec",
#else
- .dma_in_enabled = 0
+ .dma_in_enabled = 0,
+ .dma_in_enabled = 0,
+ .dma_in_nbr = UINT_MAX,
+ .dma_in_irq_nbr = 0,
+ .dma_in_irq_flags = 0,
+ .dma_in_irq_description = NULL,
#endif
#else
.enabled = 0,
+ .io_if_description = NULL,
+ .dma_in_irq_nbr = 0,
.dma_out_enabled = 0,
.dma_in_enabled = 0
#endif
@@ -746,20 +788,40 @@
.rx_ctrl = DEF_RX,
.tx_ctrl = DEF_TX,
.iseteop = 0,
+ .dma_owner = dma_ser2,
+ .io_if = if_serial_2,
#ifdef CONFIG_ETRAX_SERIAL_PORT2
.enabled = 1,
+ .io_if_description = "ser2",
#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
.dma_out_enabled = 1,
+ .dma_out_nbr = SER2_TX_DMA_NBR,
+ .dma_out_irq_nbr = SER2_DMA_TX_IRQ_NBR,
+ .dma_out_irq_flags = IRQF_DISABLED,
+ .dma_out_irq_description = "serial 2 dma tr",
#else
.dma_out_enabled = 0,
+ .dma_in_nbr = UINT_MAX,
+ .dma_in_irq_nbr = 0,
+ .dma_in_irq_flags = 0,
+ .dma_in_irq_description = NULL,
#endif
#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
.dma_in_enabled = 1,
+ .dma_in_nbr = SER2_RX_DMA_NBR,
+ .dma_in_irq_nbr = SER2_DMA_RX_IRQ_NBR,
+ .dma_in_irq_flags = IRQF_DISABLED,
+ .dma_in_irq_description = "serial 2 dma rec",
#else
- .dma_in_enabled = 0
+ .dma_in_enabled = 0,
+ .dma_in_nbr = UINT_MAX,
+ .dma_in_irq_nbr = 0,
+ .dma_in_irq_flags = 0,
+ .dma_in_irq_description = NULL,
#endif
#else
.enabled = 0,
+ .io_if_description = NULL,
.dma_out_enabled = 0,
.dma_in_enabled = 0
#endif
@@ -780,20 +842,40 @@
.rx_ctrl = DEF_RX,
.tx_ctrl = DEF_TX,
.iseteop = 1,
+ .dma_owner = dma_ser3,
+ .io_if = if_serial_3,
#ifdef CONFIG_ETRAX_SERIAL_PORT3
.enabled = 1,
+ .io_if_description = "ser3",
#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT
.dma_out_enabled = 1,
+ .dma_out_nbr = SER3_TX_DMA_NBR,
+ .dma_out_irq_nbr = SER3_DMA_TX_IRQ_NBR,
+ .dma_out_irq_flags = IRQF_DISABLED,
+ .dma_out_irq_description = "serial 3 dma tr",
#else
.dma_out_enabled = 0,
+ .dma_out_nbr = UINT_MAX,
+ .dma_out_irq_nbr = 0,
+ .dma_out_irq_flags = 0,
+ .dma_out_irq_description = NULL,
#endif
#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN
.dma_in_enabled = 1,
+ .dma_in_nbr = SER3_RX_DMA_NBR,
+ .dma_in_irq_nbr = SER3_DMA_RX_IRQ_NBR,
+ .dma_in_irq_flags = IRQF_DISABLED,
+ .dma_in_irq_description = "serial 3 dma rec",
#else
- .dma_in_enabled = 0
+ .dma_in_enabled = 0,
+ .dma_in_nbr = UINT_MAX,
+ .dma_in_irq_nbr = 0,
+ .dma_in_irq_flags = 0,
+ .dma_in_irq_description = NULL
#endif
#else
.enabled = 0,
+ .io_if_description = NULL,
.dma_out_enabled = 0,
.dma_in_enabled = 0
#endif
@@ -1414,12 +1496,11 @@
{
unsigned long flags;
- save_flags(flags);
- cli();
+ local_irq_save(flags);
*e100_modem_pins[info->line].dtr_shadow &= ~mask;
*e100_modem_pins[info->line].dtr_shadow |= (set ? 0 : mask);
*e100_modem_pins[info->line].dtr_port = *e100_modem_pins[info->line].dtr_shadow;
- restore_flags(flags);
+ local_irq_restore(flags);
}
#ifdef SERIAL_DEBUG_IO
@@ -1438,12 +1519,11 @@
{
#ifndef CONFIG_SVINTO_SIM
unsigned long flags;
- save_flags(flags);
- cli();
+ local_irq_save(flags);
info->rx_ctrl &= ~E100_RTS_MASK;
info->rx_ctrl |= (set ? 0 : E100_RTS_MASK); /* RTS is active low */
info->port[REG_REC_CTRL] = info->rx_ctrl;
- restore_flags(flags);
+ local_irq_restore(flags);
#ifdef SERIAL_DEBUG_IO
printk("ser%i rts %i\n", info->line, set);
#endif
@@ -1461,12 +1541,11 @@
unsigned char mask = e100_modem_pins[info->line].ri_mask;
unsigned long flags;
- save_flags(flags);
- cli();
+ local_irq_save(flags);
*e100_modem_pins[info->line].ri_shadow &= ~mask;
*e100_modem_pins[info->line].ri_shadow |= (set ? 0 : mask);
*e100_modem_pins[info->line].ri_port = *e100_modem_pins[info->line].ri_shadow;
- restore_flags(flags);
+ local_irq_restore(flags);
}
#endif
}
@@ -1479,12 +1558,11 @@
unsigned char mask = e100_modem_pins[info->line].cd_mask;
unsigned long flags;
- save_flags(flags);
- cli();
+ local_irq_save(flags);
*e100_modem_pins[info->line].cd_shadow &= ~mask;
*e100_modem_pins[info->line].cd_shadow |= (set ? 0 : mask);
*e100_modem_pins[info->line].cd_port = *e100_modem_pins[info->line].cd_shadow;
- restore_flags(flags);
+ local_irq_restore(flags);
}
#endif
}
@@ -1558,8 +1636,7 @@
/* Disable output DMA channel for the serial port in question
* ( set to something other then serialX)
*/
- save_flags(flags);
- cli();
+ local_irq_save(flags);
DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line));
if (info->line == 0) {
if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma6)) ==
@@ -1587,7 +1664,7 @@
}
}
*R_GEN_CONFIG = genconfig_shadow;
- restore_flags(flags);
+ local_irq_restore(flags);
}
@@ -1595,8 +1672,7 @@
{
unsigned long flags;
- save_flags(flags);
- cli();
+ local_irq_save(flags);
DFLOW(DEBUG_LOG(info->line, "enable_txdma_channel %i\n", info->line));
/* Enable output DMA channel for the serial port in question */
if (info->line == 0) {
@@ -1613,7 +1689,7 @@
genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, serial3);
}
*R_GEN_CONFIG = genconfig_shadow;
- restore_flags(flags);
+ local_irq_restore(flags);
}
static void e100_disable_rxdma_channel(struct e100_serial *info)
@@ -1623,8 +1699,7 @@
/* Disable input DMA channel for the serial port in question
* ( set to something other then serialX)
*/
- save_flags(flags);
- cli();
+ local_irq_save(flags);
if (info->line == 0) {
if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma7)) ==
IO_STATE(R_GEN_CONFIG, dma7, serial0)) {
@@ -1651,7 +1726,7 @@
}
}
*R_GEN_CONFIG = genconfig_shadow;
- restore_flags(flags);
+ local_irq_restore(flags);
}
@@ -1659,8 +1734,7 @@
{
unsigned long flags;
- save_flags(flags);
- cli();
+ local_irq_save(flags);
/* Enable input DMA channel for the serial port in question */
if (info->line == 0) {
genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7);
@@ -1676,7 +1750,7 @@
genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, serial3);
}
*R_GEN_CONFIG = genconfig_shadow;
- restore_flags(flags);
+ local_irq_restore(flags);
}
#ifdef SERIAL_HANDLE_EARLY_ERRORS
@@ -1783,7 +1857,7 @@
}
static int
-e100_write_rs485(struct tty_struct *tty, int from_user,
+e100_write_rs485(struct tty_struct *tty,
const unsigned char *buf, int count)
{
struct e100_serial * info = (struct e100_serial *)tty->driver_data;
@@ -1796,7 +1870,7 @@
*/
info->rs485.enabled = 1;
/* rs_write now deals with RS485 if enabled */
- count = rs_write(tty, from_user, buf, count);
+ count = rs_write(tty, buf, count);
info->rs485.enabled = old_enabled;
return count;
}
@@ -1834,7 +1908,7 @@
unsigned long flags;
unsigned long xoff;
- save_flags(flags); cli();
+ local_irq_save(flags);
DFLOW(DEBUG_LOG(info->line, "XOFF rs_stop xmit %i\n",
CIRC_CNT(info->xmit.head,
info->xmit.tail,SERIAL_XMIT_SIZE)));
@@ -1846,7 +1920,7 @@
}
*((unsigned long *)&info->port[REG_XOFF]) = xoff;
- restore_flags(flags);
+ local_irq_restore(flags);
}
}
@@ -1858,7 +1932,7 @@
unsigned long flags;
unsigned long xoff;
- save_flags(flags); cli();
+ local_irq_save(flags);
DFLOW(DEBUG_LOG(info->line, "XOFF rs_start xmit %i\n",
CIRC_CNT(info->xmit.head,
info->xmit.tail,SERIAL_XMIT_SIZE)));
@@ -1873,7 +1947,7 @@
info->xmit.head != info->xmit.tail && info->xmit.buf)
e100_enable_serial_tx_ready_irq(info);
- restore_flags(flags);
+ local_irq_restore(flags);
}
}
@@ -2053,8 +2127,7 @@
static void flush_timeout_function(unsigned long data);
#define START_FLUSH_FAST_TIMER_TIME(info, string, usec) {\
unsigned long timer_flags; \
- save_flags(timer_flags); \
- cli(); \
+ local_irq_save(timer_flags); \
if (fast_timers[info->line].function == NULL) { \
serial_fast_timer_started++; \
TIMERD(DEBUG_LOG(info->line, "start_timer %i ", info->line)); \
@@ -2068,7 +2141,7 @@
else { \
TIMERD(DEBUG_LOG(info->line, "timer %i already running\n", info->line)); \
} \
- restore_flags(timer_flags); \
+ local_irq_restore(timer_flags); \
}
#define START_FLUSH_FAST_TIMER(info, string) START_FLUSH_FAST_TIMER_TIME(info, string, info->flush_time_usec)
@@ -2097,8 +2170,7 @@
{
unsigned long flags;
- save_flags(flags);
- cli();
+ local_irq_save(flags);
if (!info->first_recv_buffer)
info->first_recv_buffer = buffer;
@@ -2111,7 +2183,7 @@
if (info->recv_cnt > info->max_recv_cnt)
info->max_recv_cnt = info->recv_cnt;
- restore_flags(flags);
+ local_irq_restore(flags);
}
static int
@@ -2131,11 +2203,7 @@
info->icount.rx++;
} else {
struct tty_struct *tty = info->tty;
- *tty->flip.char_buf_ptr = data;
- *tty->flip.flag_buf_ptr = flag;
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
+ tty_insert_flip_char(tty, data, flag);
info->icount.rx++;
}
@@ -2320,7 +2388,6 @@
*/
return;
#endif
- info->tty->flip.count = 0;
if (info->uses_dma_in) {
/* reset the input dma channel to be sure it works */
@@ -2482,70 +2549,21 @@
{
struct tty_struct *tty;
struct etrax_recv_buffer *buffer;
- unsigned int length;
unsigned long flags;
- int max_flip_size;
-
- if (!info->first_recv_buffer)
- return;
- save_flags(flags);
- cli();
+ local_irq_save(flags);
+ tty = info->tty;
- if (!(tty = info->tty)) {
- restore_flags(flags);
+ if (!tty) {
+ local_irq_restore(flags);
return;
}
- length = tty->flip.count;
- /* Don't flip more than the ldisc has room for.
- * The return value from ldisc.receive_room(tty) - might not be up to
- * date, the previous flip of up to TTY_FLIPBUF_SIZE might be on the
- * processed and not accounted for yet.
- * Since we use DMA, 1 SERIAL_DESCR_BUF_SIZE could be on the way.
- * Lets buffer data here and let flow control take care of it.
- * Since we normally flip large chunks, the ldisc don't react
- * with throttle until too late if we flip to much.
- */
- max_flip_size = tty->ldisc.receive_room(tty);
- if (max_flip_size < 0)
- max_flip_size = 0;
- if (max_flip_size <= (TTY_FLIPBUF_SIZE + /* Maybe not accounted for */
- length + info->recv_cnt + /* We have this queued */
- 2*SERIAL_DESCR_BUF_SIZE + /* This could be on the way */
- TTY_THRESHOLD_THROTTLE)) { /* Some slack */
- /* check TTY_THROTTLED first so it indicates our state */
- if (!test_and_set_bit(TTY_THROTTLED, &tty->flags)) {
- DFLOW(DEBUG_LOG(info->line,"flush_to_flip throttles room %lu\n", max_flip_size));
- rs_throttle(tty);
- }
-#if 0
- else if (max_flip_size <= (TTY_FLIPBUF_SIZE + /* Maybe not accounted for */
- length + info->recv_cnt + /* We have this queued */
- SERIAL_DESCR_BUF_SIZE + /* This could be on the way */
- TTY_THRESHOLD_THROTTLE)) { /* Some slack */
- DFLOW(DEBUG_LOG(info->line,"flush_to_flip throttles again! %lu\n", max_flip_size));
- rs_throttle(tty);
- }
-#endif
- }
-
- if (max_flip_size > TTY_FLIPBUF_SIZE)
- max_flip_size = TTY_FLIPBUF_SIZE;
-
- while ((buffer = info->first_recv_buffer) && length < max_flip_size) {
+ while ((buffer = info->first_recv_buffer)) {
unsigned int count = buffer->length;
- if (length + count > max_flip_size)
- count = max_flip_size - length;
-
- memcpy(tty->flip.char_buf_ptr + length, buffer->buffer, count);
- memset(tty->flip.flag_buf_ptr + length, TTY_NORMAL, count);
- tty->flip.flag_buf_ptr[length] = buffer->error;
-
- length += count;
+ tty_insert_flip_string(tty, buffer->buffer, count);
info->recv_cnt -= count;
- DFLIP(DEBUG_LOG(info->line,"flip: %i\n", length));
if (count == buffer->length) {
info->first_recv_buffer = buffer->next;
@@ -2560,24 +2578,7 @@
if (!info->first_recv_buffer)
info->last_recv_buffer = NULL;
- tty->flip.count = length;
- DFLIP(if (tty->ldisc.chars_in_buffer(tty) > 3500) {
- DEBUG_LOG(info->line, "ldisc %lu\n",
- tty->ldisc.chars_in_buffer(tty));
- DEBUG_LOG(info->line, "flip.count %lu\n",
- tty->flip.count);
- }
- );
- restore_flags(flags);
-
- DFLIP(
- if (1) {
- DEBUG_LOG(info->line, "*** rxtot %i\n", info->icount.rx);
- DEBUG_LOG(info->line, "ldisc %lu\n", tty->ldisc.chars_in_buffer(tty));
- DEBUG_LOG(info->line, "room %lu\n", tty->ldisc.receive_room(tty));
- }
-
- );
+ local_irq_restore(flags);
/* this includes a check for low-latency */
tty_flip_buffer_push(tty);
@@ -2722,21 +2723,7 @@
printk("!NO TTY!\n");
return info;
}
- if (tty->flip.count >= TTY_FLIPBUF_SIZE - TTY_THRESHOLD_THROTTLE) {
- /* check TTY_THROTTLED first so it indicates our state */
- if (!test_and_set_bit(TTY_THROTTLED, &tty->flags)) {
- DFLOW(DEBUG_LOG(info->line, "rs_throttle flip.count: %i\n", tty->flip.count));
- rs_throttle(tty);
- }
- }
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
- DEBUG_LOG(info->line, "force FLIP! %i\n", tty->flip.count);
- tty->flip.work.func((void *) tty);
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
- DEBUG_LOG(info->line, "FLIP FULL! %i\n", tty->flip.count);
- return info; /* if TTY_DONT_FLIP is set */
- }
- }
+
/* Read data and status at the same time */
data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]);
more_data:
@@ -2789,27 +2776,25 @@
DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt);
info->errorcode = ERRCODE_INSERT_BREAK;
} else {
+ unsigned char data = IO_EXTRACT(R_SERIAL0_READ, data_in, data_read);
+ char flag = TTY_NORMAL;
if (info->errorcode == ERRCODE_INSERT_BREAK) {
- info->icount.brk++;
- *tty->flip.char_buf_ptr = 0;
- *tty->flip.flag_buf_ptr = TTY_BREAK;
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
+ struct tty_struct *tty = info->tty;
+ tty_insert_flip_char(tty, 0, flag);
info->icount.rx++;
}
- *tty->flip.char_buf_ptr = IO_EXTRACT(R_SERIAL0_READ, data_in, data_read);
if (data_read & IO_MASK(R_SERIAL0_READ, par_err)) {
info->icount.parity++;
- *tty->flip.flag_buf_ptr = TTY_PARITY;
+ flag = TTY_PARITY;
} else if (data_read & IO_MASK(R_SERIAL0_READ, overrun)) {
info->icount.overrun++;
- *tty->flip.flag_buf_ptr = TTY_OVERRUN;
+ flag = TTY_OVERRUN;
} else if (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) {
info->icount.frame++;
- *tty->flip.flag_buf_ptr = TTY_FRAME;
+ flag = TTY_FRAME;
}
+ tty_insert_flip_char(tty, data, flag);
info->errorcode = 0;
}
info->break_detected_cnt = 0;
@@ -2825,16 +2810,12 @@
log_int(rdpc(), 0, 0);
}
);
- *tty->flip.char_buf_ptr = IO_EXTRACT(R_SERIAL0_READ, data_in, data_read);
- *tty->flip.flag_buf_ptr = 0;
+ tty_insert_flip_char(tty, IO_EXTRACT(R_SERIAL0_READ, data_in, data_read), TTY_NORMAL);
} else {
DEBUG_LOG(info->line, "ser_rx int but no data_avail %08lX\n", data_read);
}
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
info->icount.rx++;
data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]);
if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) {
@@ -2972,7 +2953,7 @@
if (info->x_char) {
unsigned char rstat;
DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char));
- save_flags(flags); cli();
+ local_irq_save(flags);
rstat = info->port[REG_STATUS];
DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat));
@@ -2981,7 +2962,7 @@
info->x_char = 0;
/* We must enable since it is disabled in ser_interrupt */
e100_enable_serial_tx_ready_irq(info);
- restore_flags(flags);
+ local_irq_restore(flags);
return;
}
if (info->uses_dma_out) {
@@ -2989,7 +2970,7 @@
int i;
/* We only use normal tx interrupt when sending x_char */
DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0));
- save_flags(flags); cli();
+ local_irq_save(flags);
rstat = info->port[REG_STATUS];
DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat));
e100_disable_serial_tx_ready_irq(info);
@@ -3002,7 +2983,7 @@
nop();
*info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, continue);
- restore_flags(flags);
+ local_irq_restore(flags);
return;
}
/* Normal char-by-char interrupt */
@@ -3016,7 +2997,7 @@
}
DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail]));
/* Send a byte, rs485 timing is critical so turn of ints */
- save_flags(flags); cli();
+ local_irq_save(flags);
info->port[REG_TR_DATA] = info->xmit.buf[info->xmit.tail];
info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1);
info->icount.tx++;
@@ -3040,7 +3021,7 @@
/* We must enable since it is disabled in ser_interrupt */
e100_enable_serial_tx_ready_irq(info);
}
- restore_flags(flags);
+ local_irq_restore(flags);
if (CIRC_CNT(info->xmit.head,
info->xmit.tail,
@@ -3065,7 +3046,7 @@
int handled = 0;
static volatile unsigned long reentered_ready_mask = 0;
- save_flags(flags); cli();
+ local_irq_save(flags);
irq_mask1_rd = *R_IRQ_MASK1_RD;
/* First handle all rx interrupts with ints disabled */
info = rs_table;
@@ -3110,7 +3091,7 @@
/* Unblock the serial interrupt */
*R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set);
- sti();
+ local_irq_enable();
ready_mask = (1 << (8+1+2*0)); /* ser0 tr_ready */
info = rs_table;
for (i = 0; i < NR_PORTS; i++) {
@@ -3123,11 +3104,11 @@
ready_mask <<= 2;
}
/* handle_ser_tx_interrupt enables tr_ready interrupts */
- cli();
+ local_irq_disable();
/* Handle reentered TX interrupt */
irq_mask1_rd = reentered_ready_mask;
}
- cli();
+ local_irq_disable();
tx_started = 0;
} else {
unsigned long ready_mask;
@@ -3143,7 +3124,7 @@
}
}
- restore_flags(flags);
+ local_irq_restore(flags);
return IRQ_RETVAL(handled);
} /* ser_interrupt */
#endif
@@ -3192,13 +3173,12 @@
if (!xmit_page)
return -ENOMEM;
- save_flags(flags);
- cli();
+ local_irq_save(flags);
/* if it was already initialized, skip this */
if (info->flags & ASYNC_INITIALIZED) {
- restore_flags(flags);
+ local_irq_restore(flags);
free_page(xmit_page);
return 0;
}
@@ -3324,7 +3304,7 @@
info->flags |= ASYNC_INITIALIZED;
- restore_flags(flags);
+ local_irq_restore(flags);
return 0;
}
@@ -3375,8 +3355,7 @@
info->irq);
#endif
- save_flags(flags);
- cli(); /* Disable interrupts */
+ local_irq_save(flags);
if (info->xmit.buf) {
free_page((unsigned long)info->xmit.buf);
@@ -3400,7 +3379,7 @@
set_bit(TTY_IO_ERROR, &info->tty->flags);
info->flags &= ~ASYNC_INITIALIZED;
- restore_flags(flags);
+ local_irq_restore(flags);
}
@@ -3492,8 +3471,7 @@
#ifndef CONFIG_SVINTO_SIM
/* start with default settings and then fill in changes */
- save_flags(flags);
- cli();
+ local_irq_save(flags);
/* 8 bit, no/even parity */
info->rx_ctrl &= ~(IO_MASK(R_SERIAL0_REC_CTRL, rec_bitnr) |
IO_MASK(R_SERIAL0_REC_CTRL, rec_par_en) |
@@ -3557,7 +3535,7 @@
}
*((unsigned long *)&info->port[REG_XOFF]) = xoff;
- restore_flags(flags);
+ local_irq_restore(flags);
#endif /* !CONFIG_SVINTO_SIM */
update_char_time(info);
@@ -3585,13 +3563,12 @@
/* this protection might not exactly be necessary here */
- save_flags(flags);
- cli();
+ local_irq_save(flags);
start_transmit(info);
- restore_flags(flags);
+ local_irq_restore(flags);
}
-static int rs_raw_write(struct tty_struct * tty, int from_user,
+static int rs_raw_write(struct tty_struct * tty,
const unsigned char *buf, int count)
{
int c, ret = 0;
@@ -3614,72 +3591,37 @@
SIMCOUT(buf, count);
return count;
#endif
- save_flags(flags);
+ local_save_flags(flags);
DFLOW(DEBUG_LOG(info->line, "write count %i ", count));
DFLOW(DEBUG_LOG(info->line, "ldisc %i\n", tty->ldisc.chars_in_buffer(tty)));
- /* the cli/restore_flags pairs below are needed because the
+ /* the local_irq_disable/restore_flags pairs below are needed because the
* DMA interrupt handler moves the info->xmit values. the memcpy
* needs to be in the critical region unfortunately, because we
* need to read xmit values, memcpy, write xmit values in one
* atomic operation... this could perhaps be avoided by more clever
* design.
*/
- if (from_user) {
- mutex_lock(&tmp_buf_mutex);
- while (1) {
- int c1;
- c = CIRC_SPACE_TO_END(info->xmit.head,
- info->xmit.tail,
- SERIAL_XMIT_SIZE);
- if (count < c)
- c = count;
- if (c <= 0)
- break;
-
- c -= copy_from_user(tmp_buf, buf, c);
- if (!c) {
- if (!ret)
- ret = -EFAULT;
- break;
- }
- cli();
- c1 = CIRC_SPACE_TO_END(info->xmit.head,
- info->xmit.tail,
- SERIAL_XMIT_SIZE);
- if (c1 < c)
- c = c1;
- memcpy(info->xmit.buf + info->xmit.head, tmp_buf, c);
- info->xmit.head = ((info->xmit.head + c) &
- (SERIAL_XMIT_SIZE-1));
- restore_flags(flags);
- buf += c;
- count -= c;
- ret += c;
- }
- mutex_unlock(&tmp_buf_mutex);
- } else {
- cli();
- while (count) {
- c = CIRC_SPACE_TO_END(info->xmit.head,
- info->xmit.tail,
- SERIAL_XMIT_SIZE);
-
- if (count < c)
- c = count;
- if (c <= 0)
- break;
-
- memcpy(info->xmit.buf + info->xmit.head, buf, c);
- info->xmit.head = (info->xmit.head + c) &
- (SERIAL_XMIT_SIZE-1);
- buf += c;
- count -= c;
- ret += c;
- }
- restore_flags(flags);
+ local_irq_disable();
+ while (count) {
+ c = CIRC_SPACE_TO_END(info->xmit.head,
+ info->xmit.tail,
+ SERIAL_XMIT_SIZE);
+
+ if (count < c)
+ c = count;
+ if (c <= 0)
+ break;
+
+ memcpy(info->xmit.buf + info->xmit.head, buf, c);
+ info->xmit.head = (info->xmit.head + c) &
+ (SERIAL_XMIT_SIZE-1);
+ buf += c;
+ count -= c;
+ ret += c;
}
+ local_irq_restore(flags);
/* enable transmitter if not running, unless the tty is stopped
* this does not need IRQ protection since if tr_running == 0
@@ -3698,7 +3640,7 @@
} /* raw_raw_write() */
static int
-rs_write(struct tty_struct * tty, int from_user,
+rs_write(struct tty_struct * tty,
const unsigned char *buf, int count)
{
#if defined(CONFIG_ETRAX_RS485)
@@ -3725,7 +3667,7 @@
}
#endif /* CONFIG_ETRAX_RS485 */
- count = rs_raw_write(tty, from_user, buf, count);
+ count = rs_raw_write(tty, buf, count);
#if defined(CONFIG_ETRAX_RS485)
if (info->rs485.enabled)
@@ -3793,10 +3735,9 @@
struct e100_serial *info = (struct e100_serial *)tty->driver_data;
unsigned long flags;
- save_flags(flags);
- cli();
+ local_irq_save(flags);
info->xmit.head = info->xmit.tail = 0;
- restore_flags(flags);
+ local_irq_restore(flags);
wake_up_interruptible(&tty->write_wait);
@@ -3818,7 +3759,7 @@
{
struct e100_serial *info = (struct e100_serial *)tty->driver_data;
unsigned long flags;
- save_flags(flags); cli();
+ local_irq_save(flags);
if (info->uses_dma_out) {
/* Put the DMA on hold and disable the channel */
*info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, hold);
@@ -3835,7 +3776,7 @@
DFLOW(DEBUG_LOG(info->line, "rs_send_xchar 0x%02X\n", ch));
info->x_char = ch;
e100_enable_serial_tx_ready_irq(info);
- restore_flags(flags);
+ local_irq_restore(flags);
}
/*
@@ -4085,61 +4026,6 @@
return 0;
}
-
-static int
-set_modem_info(struct e100_serial * info, unsigned int cmd,
- unsigned int *value)
-{
- unsigned int arg;
-
- if (copy_from_user(&arg, value, sizeof(int)))
- return -EFAULT;
-
- switch (cmd) {
- case TIOCMBIS:
- if (arg & TIOCM_RTS) {
- e100_rts(info, 1);
- }
- if (arg & TIOCM_DTR) {
- e100_dtr(info, 1);
- }
- /* Handle FEMALE behaviour */
- if (arg & TIOCM_RI) {
- e100_ri_out(info, 1);
- }
- if (arg & TIOCM_CD) {
- e100_cd_out(info, 1);
- }
- break;
- case TIOCMBIC:
- if (arg & TIOCM_RTS) {
- e100_rts(info, 0);
- }
- if (arg & TIOCM_DTR) {
- e100_dtr(info, 0);
- }
- /* Handle FEMALE behaviour */
- if (arg & TIOCM_RI) {
- e100_ri_out(info, 0);
- }
- if (arg & TIOCM_CD) {
- e100_cd_out(info, 0);
- }
- break;
- case TIOCMSET:
- e100_rts(info, arg & TIOCM_RTS);
- e100_dtr(info, arg & TIOCM_DTR);
- /* Handle FEMALE behaviour */
- e100_ri_out(info, arg & TIOCM_RI);
- e100_cd_out(info, arg & TIOCM_CD);
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-
static void
rs_break(struct tty_struct *tty, int break_state)
{
@@ -4149,8 +4035,7 @@
if (!info->port)
return;
- save_flags(flags);
- cli();
+ local_irq_save(flags);
if (break_state == -1) {
/* Go to manual mode and set the txd pin to 0 */
info->tx_ctrl &= 0x3F; /* Clear bit 7 (txd) and 6 (tr_enable) */
@@ -4158,7 +4043,42 @@
info->tx_ctrl |= (0x80 | 0x40); /* Set bit 7 (txd) and 6 (tr_enable) */
}
info->port[REG_TR_CTRL] = info->tx_ctrl;
- restore_flags(flags);
+ local_irq_restore(flags);
+}
+
+static int
+rs_tiocmset(struct tty_struct *tty, struct file * file, unsigned int set, unsigned int clear)
+{
+ struct e100_serial * info = (struct e100_serial *)tty->driver_data;
+
+ if (clear & TIOCM_RTS) {
+ e100_rts(info, 0);
+ }
+ if (clear & TIOCM_DTR) {
+ e100_dtr(info, 0);
+ }
+ /* Handle FEMALE behaviour */
+ if (clear & TIOCM_RI) {
+ e100_ri_out(info, 0);
+ }
+ if (clear & TIOCM_CD) {
+ e100_cd_out(info, 0);
+ }
+
+ if (set & TIOCM_RTS) {
+ e100_rts(info, 1);
+ }
+ if (set & TIOCM_DTR) {
+ e100_dtr(info, 1);
+ }
+ /* Handle FEMALE behaviour */
+ if (set & TIOCM_RI) {
+ e100_ri_out(info, 1);
+ }
+ if (set & TIOCM_CD) {
+ e100_cd_out(info, 1);
+ }
+ return 0;
}
static int
@@ -4177,10 +4097,6 @@
switch (cmd) {
case TIOCMGET:
return get_modem_info(info, (unsigned int *) arg);
- case TIOCMBIS:
- case TIOCMBIC:
- case TIOCMSET:
- return set_modem_info(info, cmd, (unsigned int *) arg);
case TIOCGSERIAL:
return get_serial_info(info,
(struct serial_struct *) arg);
@@ -4212,7 +4128,7 @@
if (copy_from_user(&rs485wr, (struct rs485_write*)arg, sizeof(rs485wr)))
return -EFAULT;
- return e100_write_rs485(tty, 1, rs485wr.outc, rs485wr.outc_size);
+ return e100_write_rs485(tty, rs485wr.outc, rs485wr.outc_size);
}
#endif
@@ -4242,46 +4158,6 @@
}
-/* In debugport.c - register a console write function that uses the normal
- * serial driver
- */
-typedef int (*debugport_write_function)(int i, const char *buf, unsigned int len);
-
-extern debugport_write_function debug_write_function;
-
-static int rs_debug_write_function(int i, const char *buf, unsigned int len)
-{
- int cnt;
- int written = 0;
- struct tty_struct *tty;
- static int recurse_cnt = 0;
-
- tty = rs_table[i].tty;
- if (tty) {
- unsigned long flags;
- if (recurse_cnt > 5) /* We skip this debug output */
- return 1;
-
- local_irq_save(flags);
- recurse_cnt++;
- local_irq_restore(flags);
- do {
- cnt = rs_write(tty, 0, buf + written, len);
- if (cnt >= 0) {
- written += cnt;
- buf += cnt;
- len -= cnt;
- } else
- len = cnt;
- } while(len > 0);
- local_irq_save(flags);
- recurse_cnt--;
- local_irq_restore(flags);
- return 1;
- }
- return 0;
-}
-
/*
* ------------------------------------------------------------
* rs_close()
@@ -4303,11 +4179,10 @@
/* interrupts are disabled for this entire function */
- save_flags(flags);
- cli();
+ local_irq_save(flags);
if (tty_hung_up_p(filp)) {
- restore_flags(flags);
+ local_irq_restore(flags);
return;
}
@@ -4334,7 +4209,7 @@
info->count = 0;
}
if (info->count) {
- restore_flags(flags);
+ local_irq_restore(flags);
return;
}
info->flags |= ASYNC_CLOSING;
@@ -4388,7 +4263,7 @@
}
info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
wake_up_interruptible(&info->close_wait);
- restore_flags(flags);
+ local_irq_restore(flags);
/* port closed */
@@ -4410,6 +4285,28 @@
#endif
}
#endif
+
+ /*
+ * Release any allocated DMA irq's.
+ */
+ if (info->dma_in_enabled) {
+ cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description);
+ free_irq(info->dma_in_irq_nbr,
+ info);
+ info->uses_dma_in = 0;
+#ifdef SERIAL_DEBUG_OPEN
+ printk("DMA irq '%s' freed\n", info->dma_in_irq_description);
+#endif
+ }
+ if (info->dma_out_enabled) {
+ free_irq(info->dma_out_irq_nbr,
+ info);
+ cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description);
+ info->uses_dma_out = 0;
+#ifdef SERIAL_DEBUG_OPEN
+ printk("DMA irq '%s' freed\n", info->dma_out_irq_description);
+#endif
+ }
}
/*
@@ -4485,7 +4382,7 @@
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
if (info->flags & ASYNC_CLOSING)
- interruptible_sleep_on(&info->close_wait);
+ wait_event_interruptible(info->close_wait, 0);
#ifdef SERIAL_DO_RESTART
if (info->flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
@@ -4523,21 +4420,19 @@
printk("block_til_ready before block: ttyS%d, count = %d\n",
info->line, info->count);
#endif
- save_flags(flags);
- cli();
+ local_irq_save(flags);
if (!tty_hung_up_p(filp)) {
extra_count++;
info->count--;
}
- restore_flags(flags);
+ local_irq_restore(flags);
info->blocked_open++;
while (1) {
- save_flags(flags);
- cli();
+ local_irq_save(flags);
/* assert RTS and DTR */
e100_rts(info, 1);
e100_dtr(info, 1);
- restore_flags(flags);
+ local_irq_restore(flags);
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
!(info->flags & ASYNC_INITIALIZED)) {
@@ -4589,9 +4484,9 @@
struct e100_serial *info;
int retval, line;
unsigned long page;
+ int allocated_resources = 0;
/* find which port we want to open */
-
line = tty->index;
if (line < 0 || line >= NR_PORTS)
@@ -4632,7 +4527,7 @@
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
if (info->flags & ASYNC_CLOSING)
- interruptible_sleep_on(&info->close_wait);
+ wait_event_interruptible(info->close_wait, 0);
#ifdef SERIAL_DO_RESTART
return ((info->flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS);
@@ -4642,12 +4537,79 @@
}
/*
+ * If DMA is enabled try to allocate the irq's.
+ */
+ if (info->count == 1) {
+ allocated_resources = 1;
+ if (info->dma_in_enabled) {
+ if (request_irq(info->dma_in_irq_nbr,
+ rec_interrupt,
+ info->dma_in_irq_flags,
+ info->dma_in_irq_description,
+ info)) {
+ printk(KERN_WARNING "DMA irq '%s' busy; falling back to non-DMA mode\n", info->dma_in_irq_description);
+ /* Make sure we never try to use DMA in for the port again. */
+ info->dma_in_enabled = 0;
+ } else if (cris_request_dma(info->dma_in_nbr,
+ info->dma_in_irq_description,
+ DMA_VERBOSE_ON_ERROR,
+ info->dma_owner)) {
+ free_irq(info->dma_in_irq_nbr, info);
+ printk(KERN_WARNING "DMA '%s' busy; falling back to non-DMA mode\n", info->dma_in_irq_description);
+ /* Make sure we never try to use DMA in for the port again. */
+ info->dma_in_enabled = 0;
+ }
+#ifdef SERIAL_DEBUG_OPEN
+ else printk("DMA irq '%s' allocated\n", info->dma_in_irq_description);
+#endif
+ }
+ if (info->dma_out_enabled) {
+ if (request_irq(info->dma_out_irq_nbr,
+ tr_interrupt,
+ info->dma_out_irq_flags,
+ info->dma_out_irq_description,
+ info)) {
+ printk(KERN_WARNING "DMA irq '%s' busy; falling back to non-DMA mode\n", info->dma_out_irq_description);
+ /* Make sure we never try to use DMA out for the port again. */
+ info->dma_out_enabled = 0;
+ } else if (cris_request_dma(info->dma_out_nbr,
+ info->dma_out_irq_description,
+ DMA_VERBOSE_ON_ERROR,
+ info->dma_owner)) {
+ free_irq(info->dma_out_irq_nbr, info);
+ printk(KERN_WARNING "DMA '%s' busy; falling back to non-DMA mode\n", info->dma_out_irq_description);
+ /* Make sure we never try to use DMA in for the port again. */
+ info->dma_out_enabled = 0;
+ }
+#ifdef SERIAL_DEBUG_OPEN
+ else printk("DMA irq '%s' allocated\n", info->dma_out_irq_description);
+#endif
+ }
+ }
+
+ /*
* Start up the serial port
*/
retval = startup(info);
- if (retval)
- return retval;
+ if (retval) {
+ if (allocated_resources) {
+ if (info->dma_out_enabled) {
+ cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description);
+ free_irq(info->dma_out_irq_nbr,
+ info);
+ }
+ if (info->dma_in_enabled) {
+ cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description);
+ free_irq(info->dma_in_irq_nbr,
+ info);
+ }
+ }
+ /* FIXME Decrease count info->count here too? */
+ return retval;
+
+ }
+
retval = block_til_ready(tty, filp, info);
if (retval) {
@@ -4655,6 +4617,19 @@
printk("rs_open returning after block_til_ready with %d\n",
retval);
#endif
+ if (allocated_resources) {
+ if (info->dma_out_enabled) {
+ cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description);
+ free_irq(info->dma_out_irq_nbr,
+ info);
+ }
+ if (info->dma_in_enabled) {
+ cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description);
+ free_irq(info->dma_in_irq_nbr,
+ info);
+ }
+ }
+
return retval;
}
@@ -4844,6 +4819,7 @@
.send_xchar = rs_send_xchar,
.wait_until_sent = rs_wait_until_sent,
.read_proc = rs_read_proc,
+ .tiocmset = rs_tiocmset
};
static int __init
@@ -4863,7 +4839,22 @@
#if !defined(CONFIG_ETRAX_SERIAL_FAST_TIMER)
init_timer(&flush_timer);
flush_timer.function = timed_flush_handler;
- mod_timer(&flush_timer, jiffies + CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS);
+ mod_timer(&flush_timer, jiffies + 5);
+#endif
+
+#if defined(CONFIG_ETRAX_RS485)
+#if defined(CONFIG_ETRAX_RS485_ON_PA)
+ if (cris_io_interface_allocate_pins(if_ser0, 'a', rs485_pa_bit, rs485_pa_bit)) {
+ printk(KERN_CRIT "ETRAX100LX serial: Could not allocate RS485 pin\n");
+ return -EBUSY;
+ }
+#endif
+#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
+ if (cris_io_interface_allocate_pins(if_ser0, 'g', rs485_pa_bit, rs485_port_g_bit)) {
+ printk(KERN_CRIT "ETRAX100LX serial: Could not allocate RS485 pin\n");
+ return -EBUSY;
+ }
+#endif
#endif
/* Initialize the tty_driver structure */
@@ -4888,6 +4879,14 @@
/* do some initializing for the separate ports */
for (i = 0, info = rs_table; i < NR_PORTS; i++,info++) {
+ if (info->enabled) {
+ if (cris_request_io_interface(info->io_if, info->io_if_description)) {
+ printk(KERN_CRIT "ETRAX100LX async serial: Could not allocate IO pins for %s, port %d\n",
+ info->io_if_description,
+ i);
+ info->enabled = 0;
+ }
+ }
info->uses_dma_in = 0;
info->uses_dma_out = 0;
info->line = i;
@@ -4939,64 +4938,16 @@
#endif
#ifndef CONFIG_SVINTO_SIM
+#ifndef CONFIG_ETRAX_KGDB
/* Not needed in simulator. May only complicate stuff. */
/* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */
- if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial ", NULL))
- panic("irq8");
-
-#ifdef CONFIG_ETRAX_SERIAL_PORT0
-#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
- if (request_irq(SER0_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_DISABLED, "serial 0 dma tr", NULL))
- panic("irq22");
-#endif
-#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
- if (request_irq(SER0_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_DISABLED, "serial 0 dma rec", NULL))
- panic("irq23");
-#endif
-#endif
-
-#ifdef CONFIG_ETRAX_SERIAL_PORT1
-#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT
- if (request_irq(SER1_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_DISABLED, "serial 1 dma tr", NULL))
- panic("irq24");
-#endif
-#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN
- if (request_irq(SER1_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_DISABLED, "serial 1 dma rec", NULL))
- panic("irq25");
-#endif
-#endif
-#ifdef CONFIG_ETRAX_SERIAL_PORT2
- /* DMA Shared with par0 (and SCSI0 and ATA) */
-#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
- if (request_irq(SER2_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 2 dma tr", NULL))
- panic("irq18");
-#endif
-#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
- if (request_irq(SER2_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 2 dma rec", NULL))
- panic("irq19");
-#endif
-#endif
-#ifdef CONFIG_ETRAX_SERIAL_PORT3
- /* DMA Shared with par1 (and SCSI1 and Extern DMA 0) */
-#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT
- if (request_irq(SER3_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 3 dma tr", NULL))
- panic("irq20");
-#endif
-#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN
- if (request_irq(SER3_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 3 dma rec", NULL))
- panic("irq21");
-#endif
-#endif
+ if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial ", driver))
+ panic("%s: Failed to request irq8", __FUNCTION__);
-#ifdef CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST
- if (request_irq(TIMER1_IRQ_NBR, timeout_interrupt, IRQF_SHARED | IRQF_DISABLED,
- "fast serial dma timeout", NULL)) {
- printk(KERN_CRIT "err: timer1 irq\n");
- }
#endif
#endif /* CONFIG_SVINTO_SIM */
- debug_write_function = rs_debug_write_function;
+
return 0;
}
--- linux-2.6.19.2.orig/drivers/serial/crisv10.h 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2.dev/drivers/serial/crisv10.h 2006-10-13 14:44:38.000000000 +0200
@@ -9,6 +9,8 @@
#include <linux/circ_buf.h>
#include <asm/termios.h>
+#include <asm/dma.h>
+#include <asm/arch/io_interface_mux.h>
/* Software state per channel */
@@ -61,6 +63,19 @@
u8 dma_in_enabled:1; /* Set to 1 if DMA should be used */
/* end of fields defined in rs_table[] in .c-file */
+ int dma_owner;
+ unsigned int dma_in_nbr;
+ unsigned int dma_out_nbr;
+ unsigned int dma_in_irq_nbr;
+ unsigned int dma_out_irq_nbr;
+ unsigned long dma_in_irq_flags;
+ unsigned long dma_out_irq_flags;
+ char *dma_in_irq_description;
+ char *dma_out_irq_description;
+
+ enum cris_io_interface io_if;
+ char *io_if_description;
+
u8 uses_dma_in; /* Set to 1 if DMA is used */
u8 uses_dma_out; /* Set to 1 if DMA is used */
u8 forced_eop; /* a fifo eop has been forced */
--- linux-2.6.19.2.orig/drivers/serial/crisv32.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2.dev/drivers/serial/crisv32.c 2007-01-05 09:59:53.000000000 +0100
@@ -0,0 +1,2333 @@
+/* $Id: crisv32.c,v 1.78 2007/01/05 08:59:53 starvik Exp $
+ *
+ * Serial port driver for the ETRAX FS chip
+ *
+ * Copyright (C) 1998-2006 Axis Communications AB
+ *
+ * Many, many authors. Based once upon a time on serial.c for 16x50.
+ *
+ * Johan Adolfsson - port to ETRAX FS
+ * Mikael Starvik - port to serial_core framework
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/serial_core.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+
+#include <asm/arch/dma.h>
+#include <asm/arch/system.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/hwregs/dma.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/ser_defs.h>
+#include <asm/arch/hwregs/dma_defs.h>
+#include <asm/arch/hwregs/gio_defs.h>
+#include <asm/arch/hwregs/intr_vect_defs.h>
+#include <asm/arch/hwregs/reg_map.h>
+
+#define UART_NR 5 /* 4 ports + dummy port */
+#define SERIAL_RECV_DESCRIPTORS 8
+
+/* We only buffer 255 characters here, no need for more tx descriptors. */
+#define SERIAL_TX_DESCRIPTORS 4
+
+/* Kept for experimental purposes. */
+#define ETRAX_SER_FIFO_SIZE 1
+#define SERIAL_DESCR_BUF_SIZE 256
+#define regi_NULL 0
+#define DMA_WAIT_UNTIL_RESET(inst) \
+ do { \
+ reg_dma_rw_stat r; \
+ do { \
+ r = REG_RD(dma, (inst), rw_stat); \
+ } while (r.mode != regk_dma_rst); \
+ } while (0)
+
+/* Macro to set up control lines for a port. */
+#define SETUP_PINS(port) \
+ if (serial_cris_ports[port].used) { \
+ if (strcmp(CONFIG_ETRAX_SER##port##_DTR_BIT, "")) \
+ crisv32_io_get_name(&serial_cris_ports[port].dtr_pin, \
+ CONFIG_ETRAX_SER##port##_DTR_BIT); \
+ else \
+ serial_cris_ports[port].dtr_pin = dummy_pin; \
+ if (strcmp(CONFIG_ETRAX_SER##port##_DSR_BIT, "")) \
+ crisv32_io_get_name(&serial_cris_ports[port].dsr_pin, \
+ CONFIG_ETRAX_SER##port##_DSR_BIT); \
+ else \
+ serial_cris_ports[port].dsr_pin = dummy_pin; \
+ if (strcmp(CONFIG_ETRAX_SER##port##_RI_BIT, "")) \
+ crisv32_io_get_name(&serial_cris_ports[port].ri_pin, \
+ CONFIG_ETRAX_SER##port##_RI_BIT); \
+ else \
+ serial_cris_ports[port].ri_pin = dummy_pin; \
+ if (strcmp(CONFIG_ETRAX_SER##port##_CD_BIT, "")) \
+ crisv32_io_get_name(&serial_cris_ports[port].cd_pin, \
+ CONFIG_ETRAX_SER##port##_CD_BIT); \
+ else \
+ serial_cris_ports[port].cd_pin = dummy_pin; \
+ }
+
+/* Set a serial port register if anything has changed. */
+#define MODIFY_REG(instance, reg, var) \
+ if (REG_RD_INT(ser, instance, reg) \
+ != REG_TYPE_CONV(int, reg_ser_##reg, var)) \
+ REG_WR(ser, instance, reg, var);
+
+/*
+ * Regarding RS485 operation in crisv32 serial driver.
+ * ---------------------------------------------------
+ * RS485 can be run in two modes, full duplex using four wires (485FD) and
+ * half duplex using two wires (485HD). The default mode of each serial port
+ * is configured in the kernel configuration. The available modes are:
+ * RS-232, RS-485 half duplex, and RS-485 full duplex.
+ *
+ * In the 485HD mode the direction of the data bus must be able to switch.
+ * The direction of the transceiver is controlled by the RTS signal. Hence
+ * the auto_rts function in the ETRAX FS chip is enabled in this mode, which
+ * automatically toggle RTS when transmitting. The initial direction of the
+ * port is receiving.
+ *
+ * In the 485FD mode two transceivers will be used, one in each direction.
+ * Usually the hardware can handle both 485HD and 485FD, which implies that
+ * one of the transceivers can change direction. Consequently that transceiver
+ * must be tied to operate in the opposite direction of the other one, setting
+ * and keeping RTS to a fixed value do this.
+ *
+ * There are two special "ioctl" that can configure the ports. These two are
+ * left for backward compatible with older applications. The effects of using
+ * them are described below:
+ * The TIOCSERSETRS485:
+ * This ioctl sets a serial port in 232 mode to 485HD mode or vise versa. The
+ * state of the port is kept when closing the port. Note that this ioctl has no
+ * effect on a serial port in the 485FD mode.
+ * The TIOCSERWRRS485:
+ * This ioctl set a serial port in 232 mode to 485HD mode and writes the data
+ * "included" in the ioctl to the port. The port will then stay in 485HD mode.
+ * Using this ioctl on a serial port in the 485HD mode will transmit the data
+ * without changing the mode. Using this ioctl on a serial port in 485FD mode
+ * will not change the mode and simply send the data using the 485FD mode.
+ */
+
+#define TYPE_232 0
+#define TYPE_485HD 1
+#define TYPE_485FD 2
+
+struct etrax_recv_buffer {
+ struct etrax_recv_buffer *next;
+ unsigned short length;
+ unsigned char error;
+ unsigned char pad;
+
+ unsigned char buffer[0];
+};
+
+struct uart_cris_port {
+ struct uart_port port;
+
+ int initialized;
+ int used;
+ int irq;
+
+ /* Used to check if port enabled as well by testing for zero. */
+ reg_scope_instances regi_ser;
+ reg_scope_instances regi_dmain;
+ reg_scope_instances regi_dmaout;
+
+ struct crisv32_iopin dtr_pin;
+ struct crisv32_iopin dsr_pin;
+ struct crisv32_iopin ri_pin;
+ struct crisv32_iopin cd_pin;
+
+ struct dma_descr_context tr_context_descr
+ __attribute__ ((__aligned__(32)));
+ struct dma_descr_data tr_descr[SERIAL_TX_DESCRIPTORS]
+ __attribute__ ((__aligned__(32)));
+ struct dma_descr_context rec_context_descr
+ __attribute__ ((__aligned__(32)));
+ struct dma_descr_data rec_descr[SERIAL_RECV_DESCRIPTORS]
+ __attribute__ ((__aligned__(32)));
+
+ /* This is the first one in the list the HW is working on now. */
+ struct dma_descr_data* first_tx_descr;
+
+ /* This is the last one in the list the HW is working on now. */
+ struct dma_descr_data* last_tx_descr;
+
+ /* This is how many characters the HW is working on now. */
+ unsigned int tx_pending_chars;
+
+ int tx_started;
+ unsigned int cur_rec_descr;
+ struct etrax_recv_buffer *first_recv_buffer;
+ struct etrax_recv_buffer *last_recv_buffer;
+
+ unsigned int recv_cnt;
+ unsigned int max_recv_cnt;
+
+ /* The time for 1 char, in usecs. */
+ unsigned long char_time_usec;
+
+ /* Last tx usec in the jiffies. */
+ unsigned long last_tx_active_usec;
+
+ /* Last tx time in jiffies. */
+ unsigned long last_tx_active;
+
+ /* Last rx usec in the jiffies. */
+ unsigned long last_rx_active_usec;
+
+ /* Last rx time in jiffies. */
+ unsigned long last_rx_active;
+
+#ifdef CONFIG_ETRAX_RS485
+ /* RS-485 support, duh. */
+ struct rs485_control rs485;
+#endif
+ int port_type;
+};
+
+extern struct uart_driver serial_cris_driver;
+static struct uart_port *console_port;
+static int console_baud = 115200;
+static struct uart_cris_port serial_cris_ports[UART_NR] = {
+{
+#ifdef CONFIG_ETRAX_SERIAL_PORT0
+ .used = 1,
+ .irq = SER0_INTR_VECT,
+ .regi_ser = regi_ser0,
+ /*
+ * We initialize the dma stuff like this to get a compiler error
+ * if a CONFIG is missing
+ */
+ .regi_dmain =
+# ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
+ regi_dma7,
+# endif
+# ifdef CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN
+ regi_NULL,
+# endif
+
+ .regi_dmaout =
+# ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
+ regi_dma6,
+# endif
+# ifdef CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT
+ regi_NULL,
+# endif
+
+# ifdef CONFIG_ETRAX_RS485
+# ifdef CONFIG_ETRAX_SERIAL_PORT0_TYPE_485HD
+ .port_type = TYPE_485HD,
+# endif
+# ifdef CONFIG_ETRAX_SERIAL_PORT0_TYPE_485FD
+ .port_type = TYPE_485FD,
+# endif
+# endif
+#else
+ .regi_ser = regi_NULL,
+ .regi_dmain = regi_NULL,
+ .regi_dmaout = regi_NULL,
+#endif
+}, /* ttyS0 */
+{
+#ifdef CONFIG_ETRAX_SERIAL_PORT1
+ .used = 1,
+ .irq = SER1_INTR_VECT,
+ .regi_ser = regi_ser1,
+ .regi_dmain =
+# ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA5_IN
+ regi_dma5,
+# endif
+# ifdef CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_IN
+ regi_NULL,
+# endif
+
+ .regi_dmaout =
+# ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA4_OUT
+ regi_dma4,
+# endif
+# ifdef CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_OUT
+ regi_NULL,
+# endif
+
+# ifdef CONFIG_ETRAX_RS485
+# ifdef CONFIG_ETRAX_SERIAL_PORT1_TYPE_485HD
+ .port_type = TYPE_485HD,
+# endif
+# ifdef CONFIG_ETRAX_SERIAL_PORT1_TYPE_485FD
+ .port_type = TYPE_485FD,
+# endif
+# endif
+#else
+ .regi_ser = regi_NULL,
+ .regi_dmain = regi_NULL,
+ .regi_dmaout = regi_NULL,
+#endif
+}, /* ttyS1 */
+{
+#ifdef CONFIG_ETRAX_SERIAL_PORT2
+ .used = 1,
+ .irq = SER2_INTR_VECT,
+ .regi_ser = regi_ser2,
+ .regi_dmain =
+# ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
+ regi_dma3,
+# endif
+# ifdef CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN
+ regi_NULL,
+# endif
+
+ .regi_dmaout =
+# ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
+ regi_dma2,
+# endif
+# ifdef CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT
+ regi_NULL,
+# endif
+
+# ifdef CONFIG_ETRAX_RS485
+# ifdef CONFIG_ETRAX_SERIAL_PORT2_TYPE_485HD
+ .port_type = TYPE_485HD,
+# endif
+# ifdef CONFIG_ETRAX_SERIAL_PORT2_TYPE_485FD
+ .port_type = TYPE_485FD,
+# endif
+# endif
+#else
+ .regi_ser = regi_NULL,
+ .regi_dmain = regi_NULL,
+ .regi_dmaout = regi_NULL,
+#endif
+}, /* ttyS2 */
+{
+#ifdef CONFIG_ETRAX_SERIAL_PORT3
+ .used = 1,
+ .irq = SER3_INTR_VECT,
+ .regi_ser = regi_ser3,
+ .regi_dmain =
+# ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA9_IN
+ regi_dma9,
+# endif
+# ifdef CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_IN
+ regi_NULL,
+# endif
+
+ .regi_dmaout =
+# ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA8_OUT
+ regi_dma8,
+# endif
+# ifdef CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_OUT
+ regi_NULL,
+# endif
+
+# ifdef CONFIG_ETRAX_RS485
+# ifdef CONFIG_ETRAX_SERIAL_PORT3_TYPE_485HD
+ .port_type = TYPE_485HD,
+# endif
+# ifdef CONFIG_ETRAX_SERIAL_PORT3_TYPE_485FD
+ .port_type = TYPE_485FD,
+# endif
+# endif
+#else
+ .regi_ser = regi_NULL,
+ .regi_dmain = regi_NULL,
+ .regi_dmaout = regi_NULL,
+#endif
+}, /* ttyS3 */
+{
+#ifdef CONFIG_ETRAX_DEBUG_PORT_NULL
+ .used = 1,
+#endif
+ .regi_ser = regi_NULL
+} /* Dummy console port */
+
+};
+
+/* Dummy pin used for unused CD, DSR, DTR and RI signals. */
+static unsigned long io_dummy;
+static struct crisv32_ioport dummy_port =
+{
+ &io_dummy,
+ &io_dummy,
+ &io_dummy,
+ 18
+};
+static struct crisv32_iopin dummy_pin =
+{
+ &dummy_port,
+ 0
+};
+
+static int selected_console =
+#if defined(CONFIG_ETRAX_DEBUG_PORT0)
+0;
+#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
+1;
+#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
+2;
+#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
+3;
+#else /* CONFIG_ETRAX_DEBUG_PORT_NULL */
+4;
+#endif
+
+extern void reset_watchdog(void);
+
+/*
+ * Interrupts are disabled on entering
+ */
+static void
+cris_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct uart_cris_port *up;
+ int i;
+ reg_ser_r_stat_din stat;
+ reg_ser_rw_tr_dma_en tr_dma_en, old;
+
+ up = &serial_cris_ports[selected_console];
+
+ /*
+ * This function isn't covered by the struct uart_ops, so we
+ * have to check manually that the port really is there,
+ * configured and live.
+ */
+ if (!up->regi_ser)
+ return;
+
+ /* Switch to manual mode. */
+ tr_dma_en = old = REG_RD (ser, up->regi_ser, rw_tr_dma_en);
+ if (tr_dma_en.en == regk_ser_yes) {
+ tr_dma_en.en = regk_ser_no;
+ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tr_dma_en);
+ }
+
+ /* Send data. */
+ for (i = 0; i < count; i++) {
+ /* LF -> CRLF */
+ if (s[i] == '\n') {
+ do {
+ stat = REG_RD (ser, up->regi_ser, r_stat_din);
+ } while (!stat.tr_rdy);
+ REG_WR_INT (ser, up->regi_ser, rw_dout, '\r');
+ }
+ /* Wait until transmitter is ready and send. */
+ do {
+ stat = REG_RD (ser, up->regi_ser, r_stat_din);
+ } while (!stat.tr_rdy);
+ REG_WR_INT (ser, up->regi_ser, rw_dout, s[i]);
+
+ /* Feed watchdog, because this may take looong time. */
+ reset_watchdog();
+ }
+
+ /* Restore mode. */
+ if (tr_dma_en.en != old.en)
+ REG_WR(ser, up->regi_ser, rw_tr_dma_en, old);
+}
+
+static void cris_serial_port_init(struct uart_port *port, int line);
+static int __init
+cris_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index >= UART_NR)
+ co->index = 0;
+ if (options)
+ selected_console = co->index;
+ port = &serial_cris_ports[selected_console].port;
+ console_port = port;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ console_baud = baud;
+ cris_serial_port_init(port, selected_console);
+ co->index = port->line;
+ uart_set_options(port, co, baud, parity, bits, flow);
+
+ return 0;
+}
+
+static struct tty_driver*
+cris_console_device(struct console* co, int *index)
+{
+ struct uart_driver *p = co->data;
+ *index = selected_console;
+ return p->tty_driver;
+}
+
+static struct console cris_console = {
+ .name = "ttyS",
+ .write = cris_console_write,
+ .device = cris_console_device,
+ .setup = cris_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &serial_cris_driver,
+};
+
+#define SERIAL_CRIS_CONSOLE &cris_console
+
+struct uart_driver serial_cris_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "serial",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = UART_NR,
+ .cons = SERIAL_CRIS_CONSOLE,
+};
+
+static int inline crisv32_serial_get_rts(struct uart_cris_port *up)
+{
+ reg_scope_instances regi_ser = up->regi_ser;
+ /*
+ * Return what the user has controlled rts to or
+ * what the pin is? (if auto_rts is used it differs during tx)
+ */
+ reg_ser_r_stat_din rstat = REG_RD(ser, regi_ser, r_stat_din);
+ return !(rstat.rts_n == regk_ser_active);
+}
+
+/*
+ * A set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive
+ * 0=0V , 1=3.3V
+ */
+static inline void crisv32_serial_set_rts(struct uart_cris_port *up, int set)
+{
+ reg_scope_instances regi_ser = up->regi_ser;
+
+#ifdef CONFIG_ETRAX_RS485
+ /* Never toggle RTS if port is in 485 mode. If port is in 485FD mode we
+ * do not want to send with the reciever and for 485HD mode auto_rts
+ * take care of the RTS for us.
+ */
+ if (!up->rs485.enabled) {
+#else
+ {
+#endif
+ unsigned long flags;
+ reg_ser_rw_rec_ctrl rec_ctrl;
+
+ local_irq_save(flags);
+ rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);
+ if (set)
+ rec_ctrl.rts_n = regk_ser_active;
+ else
+ rec_ctrl.rts_n = regk_ser_inactive;
+ REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
+ local_irq_restore(flags);
+ }
+}
+
+/* Input */
+static int inline crisv32_serial_get_cts(struct uart_cris_port *up)
+{
+ reg_scope_instances regi_ser = up->regi_ser;
+ reg_ser_r_stat_din rstat = REG_RD(ser, regi_ser, r_stat_din);
+ return (rstat.cts_n == regk_ser_active);
+}
+
+/*
+ * Send a single character for XON/XOFF purposes. We do it in this separate
+ * function instead of the alternative support port.x_char, in the ...start_tx
+ * function, so we don't mix up this case with possibly enabling transmission
+ * of queued-up data (in case that's disabled after *receiving* an XOFF or
+ * negative CTS). This function is used for both DMA and non-DMA case; see HW
+ * docs specifically blessing sending characters manually when DMA for
+ * transmission is enabled and running. We may be asked to transmit despite
+ * the transmitter being disabled by a ..._stop_tx call so we need to enable
+ * it temporarily but restore the state afterwards.
+ *
+ * Beware: I'm not sure how the RS-485 stuff is supposed to work. Using
+ * XON/XOFF seems problematic if there are several controllers, but if it's
+ * actually RS-422 (multi-drop; one sender and multiple receivers), it might
+ * Just Work, so don't bail out just because it looks a little suspicious.
+ */
+
+void serial_cris_send_xchar(struct uart_port *port, char ch)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ reg_ser_rw_dout dout = { .data = ch };
+ reg_ser_rw_ack_intr ack_intr = { .tr_rdy = regk_ser_yes };
+ reg_ser_r_stat_din rstat;
+ reg_ser_rw_tr_ctrl prev_tr_ctrl, tr_ctrl;
+ reg_scope_instances regi_ser = up->regi_ser;
+ unsigned long flags;
+
+ /*
+ * Wait for tr_rdy in case a character is already being output. Make
+ * sure we have integrity between the register reads and the writes
+ * below, but don't busy-wait with interrupts off and the port lock
+ * taken.
+ */
+ spin_lock_irqsave(&port->lock, flags);
+ do {
+ spin_unlock_irqrestore(&port->lock, flags);
+ spin_lock_irqsave(&port->lock, flags);
+ prev_tr_ctrl = tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
+ rstat = REG_RD(ser, regi_ser, r_stat_din);
+ } while (!rstat.tr_rdy);
+
+ /*
+ * Ack an interrupt if one was just issued for the previous character
+ * that was output. This is required for non-DMA as the interrupt is
+ * used as the only indicator that the transmitter is ready and it
+ * isn't while this x_char is being transmitted.
+ */
+ REG_WR(ser, regi_ser, rw_ack_intr, ack_intr);
+
+ /* Enable the transmitter in case it was disabled. */
+ tr_ctrl.stop = 0;
+ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
+
+ /*
+ * Finally, send the blessed character; nothing should stop it now,
+ * except for an xoff-detected state, which we'll handle below.
+ */
+ REG_WR(ser, regi_ser, rw_dout, dout);
+ up->port.icount.tx++;
+
+ /* There might be an xoff state to clear. */
+ rstat = REG_RD(ser, up->regi_ser, r_stat_din);
+
+ /*
+ * Clear any xoff state that *may* have been there to
+ * inhibit transmission of the character.
+ */
+ if (rstat.xoff_detect) {
+ reg_ser_rw_xoff_clr xoff_clr = { .clr = 1 };
+ REG_WR(ser, regi_ser, rw_xoff_clr, xoff_clr);
+ reg_ser_rw_tr_dma_en tr_dma_en
+ = REG_RD(ser, regi_ser, rw_tr_dma_en);
+
+ /*
+ * If we had an xoff state but cleared it, instead sneak in a
+ * disabled state for the transmitter, after the character we
+ * sent. Thus we keep the port disabled, just as if the xoff
+ * state was still in effect (or actually, as if stop_tx had
+ * been called, as we stop DMA too).
+ */
+ prev_tr_ctrl.stop = 1;
+
+ tr_dma_en.en = 0;
+ REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en);
+ }
+
+ /* Restore "previous" enabled/disabled state of the transmitter. */
+ REG_WR(ser, regi_ser, rw_tr_ctrl, prev_tr_ctrl);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void transmit_chars_dma(struct uart_cris_port *up);
+
+/*
+ * Do not spin_lock_irqsave or disable interrupts by other means here; it's
+ * already done by the caller.
+ */
+
+static void serial_cris_start_tx(struct uart_port *port)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ reg_scope_instances regi_ser = up->regi_ser;
+ reg_ser_rw_tr_ctrl tr_ctrl;
+
+ tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
+ tr_ctrl.stop = regk_ser_no;
+ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
+ if (!up->regi_dmaout) {
+ reg_ser_rw_intr_mask intr_mask =
+ REG_RD(ser, regi_ser, rw_intr_mask);
+ intr_mask.tr_rdy = regk_ser_yes;
+ REG_WR(ser, regi_ser, rw_intr_mask, intr_mask);
+ } else {
+ /*
+ * We're called possibly to re-enable transmission after it
+ * has been disabled. If so, DMA needs to be re-enabled.
+ */
+ reg_ser_rw_tr_dma_en tr_dma_en = { .en = 1 };
+ REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en);
+ transmit_chars_dma(up);
+ }
+}
+
+/*
+ * This function handles both the DMA and non-DMA case by ordering the
+ * transmitter to stop of after the current character. We don't need to wait
+ * for any such character to be completely transmitted; we do that where it
+ * matters, like in serial_cris_set_termios. Don't busy-wait here; see
+ * Documentation/serial/driver: this function is called within
+ * spin_lock_irq{,save} and thus separate ones would be disastrous (when SMP).
+ * There's no documented need to set the txd pin to any particular value;
+ * break setting is controlled solely by serial_cris_break_ctl.
+ */
+
+static void serial_cris_stop_tx(struct uart_port *port)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ reg_scope_instances regi_ser = up->regi_ser;
+ reg_ser_rw_tr_ctrl tr_ctrl;
+ reg_ser_rw_intr_mask intr_mask;
+ reg_ser_rw_tr_dma_en tr_dma_en = {0};
+ reg_ser_rw_xoff_clr xoff_clr = {0};
+
+ /*
+ * For the non-DMA case, we'd get a tr_rdy interrupt that we're not
+ * interested in as we're not transmitting any characters. For the
+ * DMA case, that interrupt is already turned off, but no reason to
+ * waste code on conditionals here.
+ */
+ intr_mask = REG_RD(ser, regi_ser, rw_intr_mask);
+ intr_mask.tr_rdy = regk_ser_no;
+ REG_WR(ser, regi_ser, rw_intr_mask, intr_mask);
+
+ tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
+ tr_ctrl.stop = 1;
+ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
+
+ /*
+ * Always clear possible hardware xoff-detected state here, no need to
+ * unnecessary consider mctrl settings and when they change. We clear
+ * it here rather than in start_tx: both functions are called as the
+ * effect of XOFF processing, but start_tx is also called when upper
+ * levels tell the driver that there are more characters to send, so
+ * avoid adding code there.
+ */
+ xoff_clr.clr = 1;
+ REG_WR(ser, regi_ser, rw_xoff_clr, xoff_clr);
+
+ /*
+ * Disable transmitter DMA, so that if we're in XON/XOFF, we can send
+ * those single characters without also giving go-ahead for queued up
+ * DMA data.
+ */
+ tr_dma_en.en = 0;
+ REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en);
+}
+
+static void serial_cris_stop_rx(struct uart_port *port)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ reg_scope_instances regi_ser = up->regi_ser;
+ reg_ser_rw_rec_ctrl rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);
+
+ rec_ctrl.en = regk_ser_no;
+ REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
+}
+
+static void serial_cris_enable_ms(struct uart_port *port)
+{
+}
+
+static void check_modem_status(struct uart_cris_port *up)
+{
+}
+
+static unsigned int serial_cris_tx_empty(struct uart_port *port)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ unsigned long flags;
+ unsigned int ret;
+ reg_ser_r_stat_din rstat = {0};
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (up->regi_dmaout) {
+ /*
+ * For DMA, before looking at r_stat, we need to check that we
+ * either haven't actually started or that end-of-list is
+ * reached, else a tr_empty indication is just an internal
+ * state. The caller qualifies, if needed, that the
+ * port->info.xmit buffer is empty, so we don't need to
+ * check that.
+ */
+ reg_dma_rw_stat status = REG_RD(dma, up->regi_dmaout, rw_stat);
+
+ if (!up->tx_started) {
+ ret = 1;
+ goto done;
+ }
+
+ if (status.list_state != regk_dma_data_at_eol) {
+ ret = 0;
+ goto done;
+ }
+ }
+
+ rstat = REG_RD(ser, up->regi_ser, r_stat_din);
+ ret = rstat.tr_empty ? TIOCSER_TEMT : 0;
+
+ done:
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ return ret;
+}
+static unsigned int serial_cris_get_mctrl(struct uart_port *port)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ unsigned int ret;
+
+ ret = 0;
+ if (crisv32_serial_get_rts(up))
+ ret |= TIOCM_RTS;
+ if (crisv32_io_rd(&up->dtr_pin))
+ ret |= TIOCM_DTR;
+ if (crisv32_io_rd(&up->cd_pin))
+ ret |= TIOCM_CD;
+ if (crisv32_io_rd(&up->ri_pin))
+ ret |= TIOCM_RI;
+ if (!crisv32_io_rd(&up->dsr_pin))
+ ret |= TIOCM_DSR;
+ if (crisv32_serial_get_cts(up))
+ ret |= TIOCM_CTS;
+ return ret;
+}
+
+static void serial_cris_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+
+ crisv32_serial_set_rts(up, mctrl & TIOCM_RTS ? 1 : 0);
+ crisv32_io_set(&up->dtr_pin, mctrl & TIOCM_DTR ? 1 : 0);
+ crisv32_io_set(&up->ri_pin, mctrl & TIOCM_RNG ? 1 : 0);
+ crisv32_io_set(&up->cd_pin, mctrl & TIOCM_CD ? 1 : 0);
+}
+
+static void serial_cris_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ unsigned long flags;
+ reg_ser_rw_tr_ctrl tr_ctrl;
+ reg_ser_rw_tr_dma_en tr_dma_en;
+ reg_ser_rw_intr_mask intr_mask;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ tr_ctrl = REG_RD(ser, up->regi_ser, rw_tr_ctrl);
+ tr_dma_en = REG_RD(ser, up->regi_ser, rw_tr_dma_en);
+ intr_mask = REG_RD(ser, up->regi_ser, rw_intr_mask);
+
+ if (break_state != 0) { /* Send break */
+ /*
+ * We need to disable DMA (if used) or tr_rdy interrupts if no
+ * DMA. No need to make this conditional on use of DMA;
+ * disabling will be a no-op for the other mode.
+ */
+ intr_mask.tr_rdy = regk_ser_no;
+ tr_dma_en.en = 0;
+
+ /*
+ * Stop transmission and set the txd pin to 0 after the
+ * current character. The txd setting will take effect after
+ * any current transmission has completed.
+ */
+ tr_ctrl.stop = 1;
+ tr_ctrl.txd = 0;
+ } else {
+ /* Re-enable either transmit DMA or the serial interrupt. */
+ if (up->regi_dmaout)
+ tr_dma_en.en = 1;
+ else
+ intr_mask.tr_rdy = regk_ser_yes;
+
+
+ tr_ctrl.stop = 0;
+ tr_ctrl.txd = 1;
+ }
+ REG_WR(ser, up->regi_ser, rw_tr_ctrl, tr_ctrl);
+ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tr_dma_en);
+ REG_WR(ser, up->regi_ser, rw_intr_mask, intr_mask);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+/*
+ * The output DMA channel is free - use it to send as many chars as
+ * possible.
+ */
+
+static void
+transmit_chars_dma(struct uart_cris_port *up)
+{
+ struct dma_descr_data *descr, *pending_descr, *dmapos;
+ struct dma_descr_data *last_tx_descr;
+ struct circ_buf *xmit = &up->port.info->xmit;
+ unsigned int sentl = 0;
+ reg_dma_rw_ack_intr ack_intr = { .data = regk_dma_yes };
+ reg_dma_rw_stat status;
+ reg_scope_instances regi_dmaout = up->regi_dmaout;
+ unsigned int chars_in_q;
+ unsigned int chars_to_send;
+
+ /* Acknowledge dma data descriptor irq, if there was one. */
+ REG_WR(dma, regi_dmaout, rw_ack_intr, ack_intr);
+
+ /*
+ * First get the amount of bytes sent during the last DMA transfer,
+ * and update xmit accordingly.
+ */
+ status = REG_RD(dma, regi_dmaout, rw_stat);
+ if (status.list_state == regk_dma_data_at_eol || !up->tx_started)
+ dmapos = phys_to_virt((int)up->last_tx_descr->next);
+ else
+ dmapos = phys_to_virt(REG_RD_INT(dma, regi_dmaout, rw_data));
+
+ pending_descr = up->first_tx_descr;
+ while (pending_descr != dmapos) {
+ sentl += pending_descr->after - pending_descr->buf;
+ pending_descr->after = pending_descr->buf = NULL;
+ pending_descr = phys_to_virt((int)pending_descr->next);
+ }
+
+ up->first_tx_descr = pending_descr;
+ last_tx_descr = up->last_tx_descr;
+
+ /* Update stats. */
+ up->port.icount.tx += sentl;
+
+ up->tx_pending_chars -= sentl;
+
+ /* Update xmit buffer. */
+ xmit->tail = (xmit->tail + sentl) & (UART_XMIT_SIZE - 1);
+
+ /*
+ * Find out the largest amount of consecutive bytes we want to send
+ * now.
+ */
+ chars_in_q = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+
+ if (chars_in_q == 0)
+ /* Tell upper layers that we're now idle. */
+ goto done;
+
+ /* Some of those characters are actually pending output. */
+ chars_to_send = chars_in_q - up->tx_pending_chars;
+
+ /*
+ * Clamp the new number of pending chars to the advertised
+ * one.
+ */
+ if (chars_to_send + up->tx_pending_chars > up->port.fifosize)
+ chars_to_send = up->port.fifosize - up->tx_pending_chars;
+
+ /* If we don't want to send any, we're done. */
+ if (chars_to_send == 0)
+ goto done;
+
+ descr = phys_to_virt((int)last_tx_descr->next);
+
+ /*
+ * We can't send anything if we could make the condition in
+ * the while-loop above (reaping finished descriptors) be met
+ * immediately before the first iteration. However, don't
+ * mistake the full state for the empty state.
+ */
+ if ((descr == up->first_tx_descr && up->tx_pending_chars != 0)
+ || descr->next == up->first_tx_descr)
+ goto done;
+
+ /* Set up the descriptor for output. */
+ descr->buf = (void*)virt_to_phys(xmit->buf + xmit->tail
+ + up->tx_pending_chars);
+ descr->after = descr->buf + chars_to_send;
+ descr->eol = 1;
+ descr->out_eop = 0;
+ descr->intr = 1;
+ descr->wait = 0;
+ descr->in_eop = 0;
+ descr->md = 0;
+ /*
+ * Make sure GCC doesn't move this eol clear before the eol set
+ * above.
+ */
+ barrier();
+ last_tx_descr->eol = 0;
+
+ up->last_tx_descr = descr;
+ up->tx_pending_chars += chars_to_send;
+
+ if (!up->tx_started) {
+ up->tx_started = 1;
+ up->tr_context_descr.next = 0;
+ up->tr_context_descr.saved_data
+ = (dma_descr_data*)virt_to_phys(descr);
+ up->tr_context_descr.saved_data_buf = descr->buf;
+ DMA_START_CONTEXT(regi_dmaout,
+ virt_to_phys(&up->tr_context_descr));
+ } else
+ DMA_CONTINUE_DATA(regi_dmaout);
+
+ /* DMA is now running (hopefully). */
+
+ done:
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+}
+
+static void
+transmit_chars_no_dma(struct uart_cris_port *up)
+{
+ int count;
+ struct circ_buf *xmit = &up->port.info->xmit;
+
+ reg_scope_instances regi_ser = up->regi_ser;
+ reg_ser_r_stat_din rstat;
+ reg_ser_rw_ack_intr ack_intr = { .tr_rdy = regk_ser_yes };
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+ /* No more to send, so disable the interrupt. */
+ reg_ser_rw_intr_mask intr_mask;
+ intr_mask = REG_RD(ser, regi_ser, rw_intr_mask);
+ intr_mask.tr_rdy = 0;
+ intr_mask.tr_empty = 0;
+ REG_WR(ser, regi_ser, rw_intr_mask, intr_mask);
+ return;
+ }
+
+ count = ETRAX_SER_FIFO_SIZE;
+ do {
+ reg_ser_rw_dout dout = { .data = xmit->buf[xmit->tail] };
+ REG_WR(ser, regi_ser, rw_dout, dout);
+ REG_WR(ser, regi_ser, rw_ack_intr, ack_intr);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1);
+ up->port.icount.tx++;
+ if (xmit->head == xmit->tail)
+ break;
+ rstat = REG_RD(ser, regi_ser, r_stat_din);
+ } while ((--count > 0) && rstat.tr_rdy);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+} /* transmit_chars_no_dma */
+
+static struct etrax_recv_buffer *
+alloc_recv_buffer(unsigned int size)
+{
+ struct etrax_recv_buffer *buffer;
+
+ if (!(buffer = kmalloc(sizeof *buffer + size, GFP_ATOMIC)))
+ panic("%s: Could not allocate %d bytes buffer\n",
+ __FUNCTION__, size);
+
+ buffer->next = NULL;
+ buffer->length = 0;
+ buffer->error = TTY_NORMAL;
+
+ return buffer;
+}
+
+static void
+append_recv_buffer(struct uart_cris_port *up,
+ struct etrax_recv_buffer *buffer)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ if (!up->first_recv_buffer)
+ up->first_recv_buffer = buffer;
+ else
+ up->last_recv_buffer->next = buffer;
+
+ up->last_recv_buffer = buffer;
+
+ up->recv_cnt += buffer->length;
+ if (up->recv_cnt > up->max_recv_cnt)
+ up->max_recv_cnt = up->recv_cnt;
+
+ local_irq_restore(flags);
+}
+
+static int
+add_char_and_flag(struct uart_cris_port *up, unsigned char data,
+ unsigned char flag)
+{
+ struct etrax_recv_buffer *buffer;
+
+ buffer = alloc_recv_buffer(4);
+ buffer->length = 1;
+ buffer->error = flag;
+ buffer->buffer[0] = data;
+
+ append_recv_buffer(up, buffer);
+
+ up->port.icount.rx++;
+
+ return 1;
+}
+
+static void
+flush_to_flip_buffer(struct uart_cris_port *up)
+{
+ struct tty_struct *tty;
+ struct etrax_recv_buffer *buffer;
+
+ tty = up->port.info->tty;
+ if (!up->first_recv_buffer || !tty)
+ return;
+
+ while ((buffer = up->first_recv_buffer)) {
+ unsigned int count = (unsigned int)
+ tty_insert_flip_string(tty, buffer->buffer,
+ buffer->length);
+
+ up->recv_cnt -= count;
+
+ if (count == buffer->length) {
+ up->first_recv_buffer = buffer->next;
+ kfree(buffer);
+ } else {
+ buffer->length -= count;
+ memmove(buffer->buffer, buffer->buffer + count,
+ buffer->length);
+ buffer->error = TTY_NORMAL;
+ }
+ }
+
+ if (!up->first_recv_buffer)
+ up->last_recv_buffer = NULL;
+
+ /* This call includes a check for low-latency. */
+ tty_flip_buffer_push(tty);
+}
+
+static unsigned int
+handle_descr_data(struct uart_cris_port *up, struct dma_descr_data *descr,
+ unsigned int recvl)
+{
+ struct etrax_recv_buffer *buffer
+ = phys_to_virt((unsigned long)descr->buf) - sizeof *buffer;
+
+ if (up->recv_cnt + recvl > 65536) {
+ printk(KERN_ERR "Too much pending incoming data on %s!"
+ " Dropping %u bytes.\n", up->port.info->tty->name,
+ recvl);
+ return 0;
+ }
+
+ buffer->length = recvl;
+
+ append_recv_buffer(up, buffer);
+
+ flush_to_flip_buffer(up);
+
+ buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE);
+ descr->buf = (void*)virt_to_phys(buffer->buffer);
+ descr->after = descr->buf + SERIAL_DESCR_BUF_SIZE;
+
+ return recvl;
+}
+
+static unsigned int
+handle_all_descr_data(struct uart_cris_port *up)
+{
+ struct dma_descr_data *descr
+ = &up->rec_descr[(up->cur_rec_descr - 1)
+ % SERIAL_RECV_DESCRIPTORS];
+ struct dma_descr_data *prev_descr;
+ unsigned int recvl;
+ unsigned int ret = 0;
+ reg_scope_instances regi_dmain = up->regi_dmain;
+
+ while (1) {
+ prev_descr = descr;
+ descr = &up->rec_descr[up->cur_rec_descr];
+
+ if (descr == phys_to_virt(REG_RD(dma, regi_dmain, rw_data)))
+ break;
+
+ if (++up->cur_rec_descr == SERIAL_RECV_DESCRIPTORS)
+ up->cur_rec_descr = 0;
+
+ /* Find out how many bytes were read. */
+ recvl = descr->after - descr->buf;
+
+ /* Update stats. */
+ up->port.icount.rx += recvl;
+
+ ret += handle_descr_data(up, descr, recvl);
+ descr->eol = 1;
+ /*
+ * Make sure GCC doesn't move this eol clear before the
+ * eol set above.
+ */
+ barrier();
+ prev_descr->eol = 0;
+ flush_dma_descr(descr,1); // Cache bug workaround
+ flush_dma_descr(prev_descr,0); // Cache bug workaround
+ }
+
+ return ret;
+}
+
+static void
+receive_chars_dma(struct uart_cris_port *up)
+{
+ reg_ser_r_stat_din rstat;
+ reg_dma_rw_ack_intr ack_intr = {0};
+
+ /* Acknowledge both dma_descr and dma_eop irq. */
+ ack_intr.data = 1;
+ ack_intr.in_eop = 1;
+ REG_WR(dma, up->regi_dmain, rw_ack_intr, ack_intr);
+
+ handle_all_descr_data(up);
+
+ /* Read the status register to detect errors. */
+ rstat = REG_RD(ser, up->regi_ser, r_stat_din);
+
+ if (rstat.framing_err | rstat.par_err | rstat.orun) {
+ /*
+ * If we got an error, we must reset it by reading the
+ * rs_stat_din register and put the data in buffer manually.
+ */
+ reg_ser_rs_stat_din stat_din;
+ stat_din = REG_RD(ser, up->regi_ser, rs_stat_din);
+
+ if (stat_din.par_err)
+ add_char_and_flag(up, stat_din.data, TTY_PARITY);
+ else if (stat_din.orun)
+ add_char_and_flag(up, stat_din.data, TTY_OVERRUN);
+ else if (stat_din.framing_err)
+ add_char_and_flag(up, stat_din.data, TTY_FRAME);
+ }
+
+ /* Restart the receiving DMA, in case it got stuck on an EOL. */
+ DMA_CONTINUE_DATA(up->regi_dmain);
+}
+
+void receive_chars_no_dma(struct uart_cris_port *up)
+{
+ reg_ser_rs_stat_din stat_din;
+ reg_ser_r_stat_din rstat;
+ struct tty_struct *tty;
+ struct uart_icount *icount;
+ int max_count = 16;
+ char flag;
+ reg_ser_rw_ack_intr ack_intr = { 0 };
+
+ rstat = REG_RD(ser, up->regi_ser, r_stat_din);
+ up->last_rx_active_usec = GET_JIFFIES_USEC();
+ up->last_rx_active = jiffies;
+ icount = &up->port.icount;
+ tty = up->port.info->tty;
+
+ do {
+ stat_din = REG_RD(ser, up->regi_ser, rs_stat_din);
+
+ flag = TTY_NORMAL;
+ ack_intr.dav = 1;
+ REG_WR(ser, up->regi_ser, rw_ack_intr, ack_intr);
+ icount->rx++;
+
+ if (stat_din.framing_err | stat_din.par_err | stat_din.orun) {
+ if (stat_din.data == 0x00 &&
+ stat_din.framing_err) {
+ /* Most likely a break. */
+ flag = TTY_BREAK;
+ icount->brk++;
+ } else if (stat_din.par_err) {
+ flag = TTY_PARITY;
+ icount->parity++;
+ } else if (stat_din.orun) {
+ flag = TTY_OVERRUN;
+ icount->overrun++;
+ } else if (stat_din.framing_err) {
+ flag = TTY_FRAME;
+ icount->frame++;
+ }
+ }
+
+ /*
+ * If this becomes important, we probably *could* handle this
+ * gracefully by keeping track of the unhandled character.
+ */
+ if (!tty_insert_flip_char(tty, stat_din.data, flag))
+ panic("%s: No tty buffer space", __FUNCTION__);
+ rstat = REG_RD(ser, up->regi_ser, r_stat_din);
+ } while (rstat.dav && (max_count-- > 0));
+ spin_unlock(&up->port.lock);
+ tty_flip_buffer_push(tty);
+ spin_lock(&up->port.lock);
+} /* receive_chars_no_dma */
+
+/*
+ * DMA output channel interrupt handler.
+ * this interrupt is called from DMA2(ser2), DMA8(ser3), DMA6(ser0) or
+ * DMA4(ser1) when they have finished a descriptor with the intr flag set.
+ */
+
+static irqreturn_t
+dma_tr_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)dev_id;
+ reg_dma_r_masked_intr masked_intr;
+ reg_scope_instances regi_dmaout;
+ int handled = 0;
+
+ spin_lock(&up->port.lock);
+ regi_dmaout = up->regi_dmaout;
+ if (!regi_dmaout) {
+ spin_unlock(&up->port.lock);
+ return IRQ_NONE;
+ }
+
+ /*
+ * Check for dma_descr (don't need to check for dma_eop in
+ * output DMA for serial).
+ */
+ masked_intr = REG_RD(dma, regi_dmaout, r_masked_intr);
+
+ if (masked_intr.data) {
+ /* We can send a new dma bunch. make it so. */
+
+ /*
+ * Read jiffies_usec first.
+ * We want this time to be as late as possible.
+ */
+ up->last_tx_active_usec = GET_JIFFIES_USEC();
+ up->last_tx_active = jiffies;
+ transmit_chars_dma(up);
+ handled = 1;
+ }
+ check_modem_status(up);
+ spin_unlock(&up->port.lock);
+ return IRQ_RETVAL(handled);
+}
+
+/* DMA input channel interrupt handler. */
+
+static irqreturn_t
+dma_rec_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)dev_id;
+ reg_dma_r_masked_intr masked_intr;
+ reg_scope_instances regi_dmain;
+ int handled = 0;
+
+ spin_lock(&up->port.lock);
+ regi_dmain = up->regi_dmain;
+ if (!regi_dmain) {
+ spin_unlock(&up->port.lock);
+ return IRQ_NONE;
+ }
+
+ /* Check for both dma_eop and dma_descr for the input dma channel. */
+ masked_intr = REG_RD(dma, regi_dmain, r_masked_intr);
+ if (masked_intr.data || masked_intr.in_eop) {
+ /* We have received something. */
+ receive_chars_dma(up);
+ handled = 1;
+ }
+ check_modem_status(up);
+ spin_unlock(&up->port.lock);
+ return IRQ_RETVAL(handled);
+}
+
+/* "Normal" serial port interrupt handler - both rx and tx. */
+
+static irqreturn_t
+ser_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)dev_id;
+ reg_scope_instances regi_ser;
+ int handled = 0;
+
+ spin_lock(&up->port.lock);
+ if (up->regi_dmain && up->regi_dmaout) {
+ spin_unlock(&up->port.lock);
+ return IRQ_NONE;
+ }
+
+ regi_ser = up->regi_ser;
+
+ if (regi_ser) {
+ reg_ser_r_masked_intr masked_intr;
+ masked_intr = REG_RD(ser, regi_ser, r_masked_intr);
+ /*
+ * Check what interrupts are active before taking
+ * actions. If DMA is used the interrupt shouldn't
+ * be enabled.
+ */
+ if (masked_intr.dav) {
+ receive_chars_no_dma(up);
+ handled = 1;
+ }
+ check_modem_status(up);
+
+ if (masked_intr.tr_rdy) {
+ transmit_chars_no_dma(up);
+ handled = 1;
+ }
+ }
+ spin_unlock(&up->port.lock);
+ return IRQ_RETVAL(handled);
+} /* ser_interrupt */
+
+static int start_recv_dma(struct uart_cris_port *up)
+{
+ struct dma_descr_data *descr = up->rec_descr;
+ struct etrax_recv_buffer *buffer;
+ int i;
+
+ /* Set up the receiving descriptors. */
+ for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) {
+ buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE);
+ descr[i].next = (void*)virt_to_phys(&descr[i+1]);
+ descr[i].buf = (void*)virt_to_phys(buffer->buffer);
+ descr[i].after = descr[i].buf + SERIAL_DESCR_BUF_SIZE;
+ descr[i].eol = 0;
+ descr[i].out_eop = 0;
+ descr[i].intr = 1;
+ descr[i].wait = 0;
+ descr[i].in_eop = 0;
+ descr[i].md = 0;
+
+ }
+
+ /* Link the last descriptor to the first. */
+ descr[i-1].next = (void*)virt_to_phys(&descr[0]);
+
+ /* And mark it as end of list. */
+ descr[i-1].eol = 1;
+
+ /* Start with the first descriptor in the list. */
+ up->cur_rec_descr = 0;
+ up->rec_context_descr.next = 0;
+ up->rec_context_descr.saved_data
+ = (dma_descr_data *)virt_to_phys(&descr[up->cur_rec_descr]);
+ up->rec_context_descr.saved_data_buf = descr[up->cur_rec_descr].buf;
+
+ /* Start the DMA. */
+ DMA_START_CONTEXT(up->regi_dmain,
+ virt_to_phys(&up->rec_context_descr));
+
+ /* Input DMA should be running now. */
+ return 1;
+}
+
+
+static void start_receive(struct uart_cris_port *up)
+{
+ reg_scope_instances regi_dmain = up->regi_dmain;
+ if (regi_dmain) {
+ start_recv_dma(up);
+ }
+}
+
+
+static void start_transmitter(struct uart_cris_port *up)
+{
+ int i;
+ reg_scope_instances regi_dmaout = up->regi_dmaout;
+ if (regi_dmaout) {
+ for (i = 0; i < SERIAL_TX_DESCRIPTORS; i++) {
+ memset(&up->tr_descr[i], 0, sizeof(up->tr_descr[i]));
+ up->tr_descr[i].eol = 1;
+ up->tr_descr[i].intr = 1;
+ up->tr_descr[i].next = (dma_descr_data *)
+ virt_to_phys(&up->tr_descr[i+1]);
+ }
+ up->tr_descr[i-1].next = (dma_descr_data *)
+ virt_to_phys(&up->tr_descr[0]);
+ up->first_tx_descr = &up->tr_descr[0];
+
+ /*
+ * We'll be counting up to up->last_tx_descr->next from
+ * up->first_tx_descr when starting DMA, so we should make
+ * them the same for the very first round. If instead we'd
+ * set last_tx_descr = first_tx_descr, we'd rely on
+ * accidentally working code and data as we'd take a pass over
+ * the first, unused, descriptor.
+ */
+ up->last_tx_descr = &up->tr_descr[i-1];
+ up->tx_started = 0;
+ up->tx_pending_chars = 0;
+ }
+}
+
+static int serial_cris_startup(struct uart_port *port)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ unsigned long flags;
+ reg_intr_vect_rw_mask intr_mask;
+ reg_ser_rw_intr_mask ser_intr_mask = {0};
+ reg_dma_rw_intr_mask dmain_intr_mask = {0};
+ reg_dma_rw_intr_mask dmaout_intr_mask = {0};
+ reg_dma_rw_cfg cfg = {.en = 1};
+ reg_scope_instances regi_dma;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
+
+ dmain_intr_mask.data = dmain_intr_mask.in_eop = regk_dma_yes;
+ dmaout_intr_mask.data = regk_dma_yes;
+ if (!up->regi_dmain)
+ ser_intr_mask.dav = regk_ser_yes;
+
+ if (port->line == 0) {
+ if (request_irq(SER0_INTR_VECT, ser_interrupt,
+ IRQF_SHARED | IRQF_DISABLED, "ser0",
+ &serial_cris_ports[0]))
+ panic("irq ser0");
+ /* Enable the ser0 irq in global config. */
+ intr_mask.ser0 = 1;
+ /* Port ser0 can use dma6 for tx and dma7 for rx. */
+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
+ if (request_irq(DMA6_INTR_VECT, dma_tr_interrupt,
+ IRQF_DISABLED, "serial 0 dma tr",
+ &serial_cris_ports[0]))
+ panic("irq ser0txdma");
+ crisv32_request_dma(6, "ser0", DMA_PANIC_ON_ERROR, 0,
+ dma_ser0);
+ /* Enable the dma6 irq in global config. */
+ intr_mask.dma6 = 1;
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
+ if (request_irq(DMA7_INTR_VECT, dma_rec_interrupt,
+ IRQF_DISABLED, "serial 0 dma rec",
+ &serial_cris_ports[0]))
+ panic("irq ser0rxdma");
+ crisv32_request_dma(7, "ser0", DMA_PANIC_ON_ERROR, 0,
+ dma_ser0);
+ /* Enable the dma7 irq in global config. */
+ intr_mask.dma7 = 1;
+#endif
+ } else if (port->line == 1) {
+ if (request_irq(SER1_INTR_VECT, ser_interrupt,
+ IRQF_SHARED | IRQF_DISABLED, "ser1",
+ &serial_cris_ports[1]))
+ panic("irq ser1");
+ /* Enable the ser1 irq in global config. */
+ intr_mask.ser1 = 1;
+
+ /* Port ser1 can use dma4 for tx and dma5 for rx. */
+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA4_OUT
+ if (request_irq(DMA4_INTR_VECT, dma_tr_interrupt,
+ IRQF_DISABLED, "serial 1 dma tr",
+ &serial_cris_ports[1]))
+ panic("irq ser1txdma");
+ crisv32_request_dma(4, "ser1", DMA_PANIC_ON_ERROR, 0,
+ dma_ser1);
+ /* Enable the dma4 irq in global config. */
+ intr_mask.dma4 = 1;
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA5_IN
+ if (request_irq(DMA5_INTR_VECT, dma_rec_interrupt,
+ IRQF_DISABLED, "serial 1 dma rec",
+ &serial_cris_ports[1]))
+ panic("irq ser1rxdma");
+ crisv32_request_dma(5, "ser1", DMA_PANIC_ON_ERROR, 0,
+ dma_ser1);
+ /* Enable the dma5 irq in global config. */
+ intr_mask.dma5 = 1;
+#endif
+ } else if (port->line == 2) {
+ if (request_irq(SER2_INTR_VECT, ser_interrupt,
+ IRQF_SHARED | IRQF_DISABLED, "ser2",
+ &serial_cris_ports[2]))
+ panic("irq ser2");
+ /* Enable the ser2 irq in global config. */
+ intr_mask.ser2 = 1;
+
+ /* Port ser2 can use dma2 for tx and dma3 for rx. */
+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
+ if (request_irq(DMA2_INTR_VECT, dma_tr_interrupt,
+ IRQF_DISABLED, "serial 2 dma tr",
+ &serial_cris_ports[2]))
+ panic("irq ser2txdma");
+ crisv32_request_dma(2, "ser2", DMA_PANIC_ON_ERROR, 0,
+ dma_ser2);
+ /* Enable the dma2 irq in global config. */
+ intr_mask.dma2 = 1;
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
+ if (request_irq(DMA3_INTR_VECT, dma_rec_interrupt,
+ IRQF_DISABLED, "serial 2 dma rec",
+ &serial_cris_ports[2]))
+ panic("irq ser2rxdma");
+ crisv32_request_dma(3, "ser2", DMA_PANIC_ON_ERROR, 0,
+ dma_ser2);
+ /* Enable the dma3 irq in global config. */
+ intr_mask.dma3 = 1;
+#endif
+ } else if (port->line == 3) {
+ if (request_irq(SER3_INTR_VECT, ser_interrupt,
+ IRQF_SHARED | IRQF_DISABLED, "ser3",
+ &serial_cris_ports[3]))
+ panic("irq ser3" );
+ /* Enable the ser3 irq in global config. */
+ intr_mask.ser3 = 1;
+
+ /* Port ser3 can use dma8 for tx and dma9 for rx. */
+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA8_OUT
+ if (request_irq(DMA8_INTR_VECT, dma_tr_interrupt,
+ IRQF_DISABLED, "serial 3 dma tr",
+ &serial_cris_ports[3]))
+ panic("irq ser3txdma");
+ crisv32_request_dma(8, "ser3", DMA_PANIC_ON_ERROR, 0,
+ dma_ser3);
+ /* Enable the dma2 irq in global config. */
+ intr_mask.dma8 = 1;
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA9_IN
+ if (request_irq(DMA9_INTR_VECT, dma_rec_interrupt,
+ IRQF_DISABLED, "serial 3 dma rec",
+ &serial_cris_ports[3]))
+ panic("irq ser3rxdma");
+ crisv32_request_dma(9, "ser3", DMA_PANIC_ON_ERROR, 0,
+ dma_ser3);
+ /* Enable the dma3 irq in global config. */
+ intr_mask.dma9 = 1;
+#endif
+ }
+
+ /*
+ * Reset the DMA channels and make sure their interrupts are cleared.
+ */
+
+ regi_dma = up->regi_dmain;
+ if (regi_dma) {
+ reg_dma_rw_ack_intr ack_intr = { 0 };
+ DMA_RESET(regi_dma);
+ /* Wait until reset cycle is complete. */
+ DMA_WAIT_UNTIL_RESET(regi_dma);
+ REG_WR(dma, regi_dma, rw_cfg, cfg);
+ /* Make sure the irqs are cleared. */
+ ack_intr.group = 1;
+ ack_intr.ctxt = 1;
+ ack_intr.data = 1;
+ ack_intr.in_eop = 1;
+ ack_intr.stream_cmd = 1;
+ REG_WR(dma, regi_dma, rw_ack_intr, ack_intr);
+ }
+ regi_dma = up->regi_dmaout;
+ if (regi_dma) {
+ reg_dma_rw_ack_intr ack_intr = { 0 };
+ DMA_RESET(regi_dma);
+ /* Wait until reset cycle is complete. */
+ DMA_WAIT_UNTIL_RESET(regi_dma);
+ REG_WR(dma, regi_dma, rw_cfg, cfg);
+ /* Make sure the irqs are cleared. */
+ ack_intr.group = 1;
+ ack_intr.ctxt = 1;
+ ack_intr.data = 1;
+ ack_intr.in_eop = 1;
+ ack_intr.stream_cmd = 1;
+ REG_WR(dma, regi_dma, rw_ack_intr, ack_intr);
+ }
+
+ REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
+ REG_WR(ser, up->regi_ser, rw_intr_mask, ser_intr_mask);
+ if (up->regi_dmain)
+ REG_WR(dma, up->regi_dmain, rw_intr_mask, dmain_intr_mask);
+ if (up->regi_dmaout)
+ REG_WR(dma, up->regi_dmaout, rw_intr_mask, dmaout_intr_mask);
+
+ start_receive(up);
+ start_transmitter(up);
+
+ serial_cris_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return 0;
+}
+
+static void serial_cris_shutdown(struct uart_port *port)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ unsigned long flags;
+ reg_intr_vect_rw_mask intr_mask;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
+ serial_cris_stop_tx(port);
+ serial_cris_stop_rx(port);
+
+ if (port->line == 0) {
+ intr_mask.ser0 = 0;
+ free_irq(SER0_INTR_VECT, &serial_cris_ports[0]);
+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
+ intr_mask.dma6 = 0;
+ crisv32_free_dma(6);
+ free_irq(DMA6_INTR_VECT, &serial_cris_ports[0]);
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
+ intr_mask.dma7 = 0;
+ crisv32_free_dma(7);
+ free_irq(DMA7_INTR_VECT, &serial_cris_ports[0]);
+#endif
+ } else if (port->line == 1) {
+ intr_mask.ser1 = 0;
+ free_irq(SER1_INTR_VECT, &serial_cris_ports[1]);
+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA4_OUT
+ intr_mask.dma4 = 0;
+ crisv32_free_dma(4);
+ free_irq(DMA4_INTR_VECT, &serial_cris_ports[1]);
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA5_IN
+ intr_mask.dma5 = 0;
+ crisv32_free_dma(5);
+ free_irq(DMA5_INTR_VECT, &serial_cris_ports[1]);
+#endif
+ } else if (port->line == 2) {
+ intr_mask.ser2 = 0;
+ free_irq(SER2_INTR_VECT, &serial_cris_ports[2]);
+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
+ intr_mask.dma2 = 0;
+ crisv32_free_dma(2);
+ free_irq(DMA2_INTR_VECT, &serial_cris_ports[2]);
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
+ intr_mask.dma3 = 0;
+ crisv32_free_dma(3);
+ free_irq(DMA3_INTR_VECT, &serial_cris_ports[2]);
+#endif
+ } else if (port->line == 3) {
+ intr_mask.ser3 = 0;
+ free_irq(SER3_INTR_VECT, &serial_cris_ports[3]);
+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA8_OUT
+ intr_mask.dma8 = 0;
+ crisv32_free_dma(8);
+ free_irq(DMA8_INTR_VECT, &serial_cris_ports[3]);
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA9_IN
+ intr_mask.dma9 = 0;
+ crisv32_free_dma(9);
+ free_irq(DMA9_INTR_VECT, &serial_cris_ports[3]);
+#endif
+ }
+
+ REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
+
+ serial_cris_set_mctrl(&up->port, up->port.mctrl);
+
+ if (up->regi_dmain) {
+ struct etrax_recv_buffer *rb;
+ struct etrax_recv_buffer *rb_next;
+ int i;
+ struct dma_descr_data *descr;
+
+ /*
+ * In case of DMA and receive errors, there might be pending
+ * receive buffers still linked here and not flushed upwards.
+ * Release them.
+ */
+ for (rb = up->first_recv_buffer; rb != NULL; rb = rb_next) {
+ rb_next = rb->next;
+ kfree (rb);
+ }
+ up->first_recv_buffer = NULL;
+ up->last_recv_buffer = NULL;
+
+ /*
+ * Also release buffers that were attached to the DMA
+ * before we shut down the hardware above.
+ */
+ for (i = 0, descr = up->rec_descr;
+ i < SERIAL_RECV_DESCRIPTORS;
+ i++)
+ if (descr[i].buf) {
+ rb = phys_to_virt((u32) descr[i].buf)
+ - sizeof *rb;
+ kfree(rb);
+ descr[i].buf = NULL;
+ }
+ }
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+}
+
+static void
+serial_cris_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ unsigned long flags;
+ reg_ser_rw_xoff xoff;
+ reg_ser_rw_xoff_clr xoff_clr = {0};
+ reg_ser_rw_tr_ctrl tx_ctrl = {0};
+ reg_ser_rw_tr_dma_en tx_dma_en = {0};
+ reg_ser_rw_rec_ctrl rx_ctrl = {0};
+ reg_ser_rw_tr_baud_div tx_baud_div = {0};
+ reg_ser_rw_rec_baud_div rx_baud_div = {0};
+ reg_ser_r_stat_din rstat;
+ int baud;
+
+ if (old &&
+ termios->c_cflag == old->c_cflag &&
+ termios->c_iflag == old->c_iflag)
+ return;
+
+ /* Start with default settings and then fill in changes. */
+
+ /* Tx: 8 bit, no/even parity, 1 stop bit, no cts. */
+ tx_ctrl.base_freq = regk_ser_f29_493;
+ tx_ctrl.en = 0;
+ tx_ctrl.stop = 0;
+#ifdef CONFIG_ETRAX_RS485
+ if (up->rs485.enabled && (up->port_type != TYPE_485FD)) {
+ tx_ctrl.auto_rts = regk_ser_yes;
+ } else
+#endif
+ tx_ctrl.auto_rts = regk_ser_no;
+ tx_ctrl.txd = 1;
+ tx_ctrl.auto_cts = 0;
+ /* Rx: 8 bit, no/even parity. */
+ if (up->regi_dmain) {
+ rx_ctrl.dma_mode = 1;
+ rx_ctrl.auto_eop = 1;
+ }
+ rx_ctrl.dma_err = regk_ser_stop;
+ rx_ctrl.sampling = regk_ser_majority;
+ rx_ctrl.timeout = 1;
+
+#ifdef CONFIG_ETRAX_RS485
+ if (up->rs485.enabled && (up->port_type != TYPE_485FD)) {
+# ifdef CONFIG_ETRAX_RS485_DISABLE_RECEIVER
+ rx_ctrl.half_duplex = regk_ser_yes;
+# endif
+ rx_ctrl.rts_n = up->rs485.rts_after_sent ?
+ regk_ser_active : regk_ser_inactive;
+ } else if (up->port_type == TYPE_485FD) {
+ rx_ctrl.rts_n = regk_ser_active;
+ } else
+#endif
+ rx_ctrl.rts_n = regk_ser_inactive;
+
+ /* Common for tx and rx: 8N1. */
+ tx_ctrl.data_bits = regk_ser_bits8;
+ rx_ctrl.data_bits = regk_ser_bits8;
+ tx_ctrl.par = regk_ser_even;
+ rx_ctrl.par = regk_ser_even;
+ tx_ctrl.par_en = regk_ser_no;
+ rx_ctrl.par_en = regk_ser_no;
+
+ tx_ctrl.stop_bits = regk_ser_bits1;
+
+
+ /* Change baud-rate and write it to the hardware. */
+
+ /* baud_clock = base_freq / (divisor*8)
+ * divisor = base_freq / (baud_clock * 8)
+ * base_freq is either:
+ * off, ext, 29.493MHz, 32.000 MHz, 32.768 MHz or 100 MHz
+ * 20.493MHz is used for standard baudrates
+ */
+
+ /*
+ * For the console port we keep the original baudrate here. Not very
+ * beautiful.
+ */
+ if ((port != console_port) || old)
+ baud = uart_get_baud_rate(port, termios, old, 0,
+ port->uartclk / 8);
+ else
+ baud = console_baud;
+
+ tx_baud_div.div = 29493000 / (8 * baud);
+ /* Rx uses same as tx. */
+ rx_baud_div.div = tx_baud_div.div;
+ rx_ctrl.base_freq = tx_ctrl.base_freq;
+
+ if ((termios->c_cflag & CSIZE) == CS7) {
+ /* Set 7 bit mode. */
+ tx_ctrl.data_bits = regk_ser_bits7;
+ rx_ctrl.data_bits = regk_ser_bits7;
+ }
+
+ if (termios->c_cflag & CSTOPB) {
+ /* Set 2 stop bit mode. */
+ tx_ctrl.stop_bits = regk_ser_bits2;
+ }
+
+ if (termios->c_cflag & PARENB) {
+ /* Enable parity. */
+ tx_ctrl.par_en = regk_ser_yes;
+ rx_ctrl.par_en = regk_ser_yes;
+ }
+
+ if (termios->c_cflag & CMSPAR) {
+ if (termios->c_cflag & PARODD) {
+ /* Set mark parity if PARODD and CMSPAR. */
+ tx_ctrl.par = regk_ser_mark;
+ rx_ctrl.par = regk_ser_mark;
+ } else {
+ tx_ctrl.par = regk_ser_space;
+ rx_ctrl.par = regk_ser_space;
+ }
+ } else {
+ if (termios->c_cflag & PARODD) {
+ /* Set odd parity. */
+ tx_ctrl.par = regk_ser_odd;
+ rx_ctrl.par = regk_ser_odd;
+ }
+ }
+
+ if (termios->c_cflag & CRTSCTS) {
+ /* Enable automatic CTS handling. */
+ tx_ctrl.auto_cts = regk_ser_yes;
+ }
+
+ /* Make sure the tx and rx are enabled. */
+ tx_ctrl.en = regk_ser_yes;
+ rx_ctrl.en = regk_ser_yes;
+
+ /*
+ * Wait for tr_idle in case a character is being output, so it won't
+ * be damaged by the changes we do below. It seems the termios
+ * changes "sometimes" (we can't see e.g. a tcsetattr TCSANOW
+ * parameter here) should take place no matter what state. However,
+ * in case we should wait, we may have a non-empty transmitter state
+ * as we tell the upper layers that we're all done when we've passed
+ * characters to the hardware, but we don't wait for them being
+ * actually shifted out.
+ */
+ spin_lock_irqsave(&port->lock, flags);
+
+ /*
+ * None of our interrupts re-enable DMA, so it's thankfully ok to
+ * disable it once, outside the loop.
+ */
+ tx_dma_en.en = 0;
+ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tx_dma_en);
+ do {
+ /*
+ * Make sure we have integrity between the read r_stat status
+ * and us writing the registers below, but don't busy-wait
+ * with interrupts off. We need to keep the port lock though
+ * (if we go SMP), so nobody else writes characters.
+ */
+ local_irq_restore(flags);
+ local_irq_save(flags);
+ rstat = REG_RD(ser, up->regi_ser, r_stat_din);
+ } while (!rstat.tr_idle);
+
+ /* Actually write the control regs (if modified) to the hardware. */
+
+ uart_update_timeout(port, termios->c_cflag, port->uartclk/8);
+ MODIFY_REG(up->regi_ser, rw_rec_baud_div, rx_baud_div);
+ MODIFY_REG(up->regi_ser, rw_rec_ctrl, rx_ctrl);
+
+ MODIFY_REG(up->regi_ser, rw_tr_baud_div, tx_baud_div);
+ MODIFY_REG(up->regi_ser, rw_tr_ctrl, tx_ctrl);
+
+ tx_dma_en.en = up->regi_dmaout != 0;
+ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tx_dma_en);
+
+ xoff = REG_RD(ser, up->regi_ser, rw_xoff);
+
+ if (up->port.info && (up->port.info->tty->termios->c_iflag & IXON)) {
+ xoff.chr = STOP_CHAR(up->port.info->tty);
+ xoff.automatic = regk_ser_yes;
+ } else
+ xoff.automatic = regk_ser_no;
+
+ MODIFY_REG(up->regi_ser, rw_xoff, xoff);
+
+ /*
+ * Make sure we don't start in an automatically shut-off state due to
+ * a previous early exit.
+ */
+ xoff_clr.clr = 1;
+ REG_WR(ser, up->regi_ser, rw_xoff_clr, xoff_clr);
+
+ serial_cris_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static const char *
+serial_cris_type(struct uart_port *port)
+{
+ return "CRISv32";
+}
+
+static void serial_cris_release_port(struct uart_port *port)
+{
+}
+
+static int serial_cris_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void serial_cris_config_port(struct uart_port *port, int flags)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ up->port.type = PORT_CRIS;
+}
+
+#if defined(CONFIG_ETRAX_RS485)
+
+static void cris_set_rs485_mode(struct uart_cris_port* up) {
+ reg_ser_rw_tr_ctrl tr_ctrl;
+ reg_ser_rw_rec_ctrl rec_ctrl;
+ reg_scope_instances regi_ser = up->regi_ser;
+
+ if (up->port_type == TYPE_485FD)
+ /* We do not want to change anything if we are in 485FD mode */
+ return;
+
+ tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
+ rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);
+
+ /* Set port in RS-485 mode */
+ if (up->rs485.enabled) {
+ tr_ctrl.auto_rts = regk_ser_yes;
+ rec_ctrl.rts_n = up->rs485.rts_after_sent ?
+ regk_ser_active : regk_ser_inactive;
+#ifdef CONFIG_ETRAX_RS485_DISABLE_RECEIVER
+ rec_ctrl.half_duplex = regk_ser_yes;
+#endif
+ }
+ /* Set port to RS-232 mode */
+ else {
+ rec_ctrl.rts_n = regk_ser_inactive;
+ tr_ctrl.auto_rts = regk_ser_no;
+ rec_ctrl.half_duplex = regk_ser_no;
+ }
+
+ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
+ REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
+}
+
+/* Enable/disable RS-485 mode on selected port. */
+static int
+cris_enable_rs485(struct uart_cris_port* up, struct rs485_control *r)
+{
+ if (up->port_type == TYPE_485FD)
+ /* Port in 485FD mode can not chage mode */
+ goto out;
+
+ up->rs485.enabled = 0x1 & r->enabled;
+ up->rs485.rts_on_send = 0x01 & r->rts_on_send;
+ up->rs485.rts_after_sent = 0x01 & r->rts_after_sent;
+ up->rs485.delay_rts_before_send = r->delay_rts_before_send;
+
+ cris_set_rs485_mode(up);
+ out:
+ return 0;
+}
+
+
+/* Enable RS485 mode on port and send the data. Port will stay
+ * in 485 mode after the data has been sent.
+ */
+static int
+cris_write_rs485(struct uart_cris_port* up, const unsigned char *buf,
+ int count)
+{
+ up->rs485.enabled = 1;
+
+ /* Set the port in RS485 mode */
+ cris_set_rs485_mode(up);
+
+ /* Send the data */
+ count = serial_cris_driver.tty_driver->write(up->port.info->tty, buf, count);
+
+ return count;
+}
+
+#endif /* CONFIG_ETRAX_RS485 */
+
+static int serial_cris_ioctl(struct uart_port *port, unsigned int cmd,
+ unsigned long arg)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+
+ switch (cmd) {
+#if defined(CONFIG_ETRAX_RS485)
+ case TIOCSERSETRS485: {
+ struct rs485_control rs485ctrl;
+ if (copy_from_user(&rs485ctrl, (struct rs485_control*) arg,
+ sizeof(rs485ctrl)))
+ return -EFAULT;
+
+ return cris_enable_rs485(up, &rs485ctrl);
+ }
+
+ case TIOCSERWRRS485: {
+ struct rs485_write rs485wr;
+ if (copy_from_user(&rs485wr, (struct rs485_write*)arg,
+ sizeof(rs485wr)))
+ return -EFAULT;
+
+ return cris_write_rs485(up, rs485wr.outc, rs485wr.outc_size);
+ }
+#endif
+ default:
+ return -ENOIOCTLCMD;
+ }
+
+ return 0;
+}
+
+static const struct uart_ops serial_cris_pops = {
+ .tx_empty = serial_cris_tx_empty,
+ .set_mctrl = serial_cris_set_mctrl,
+ .get_mctrl = serial_cris_get_mctrl,
+ .stop_tx = serial_cris_stop_tx,
+ .start_tx = serial_cris_start_tx,
+ .send_xchar = serial_cris_send_xchar,
+ .stop_rx = serial_cris_stop_rx,
+ .enable_ms = serial_cris_enable_ms,
+ .break_ctl = serial_cris_break_ctl,
+ .startup = serial_cris_startup,
+ .shutdown = serial_cris_shutdown,
+ .set_termios = serial_cris_set_termios,
+ .type = serial_cris_type,
+ .release_port = serial_cris_release_port,
+ .request_port = serial_cris_request_port,
+ .config_port = serial_cris_config_port,
+ .ioctl = serial_cris_ioctl,
+};
+
+/*
+ * It's too easy to break CONFIG_ETRAX_DEBUG_PORT_NULL and the
+ * no-config choices by adding and moving code to before a necessary
+ * early exit in all functions for the special case of
+ * up->regi_ser == 0. This collection of dummy functions lets us
+ * avoid that. Maybe there should be a generic table of dummy serial
+ * functions?
+ */
+
+static unsigned int serial_cris_tx_empty_dummy(struct uart_port *port)
+{
+ return TIOCSER_TEMT;
+}
+
+static void serial_cris_set_mctrl_dummy(struct uart_port *port,
+ unsigned int mctrl)
+{
+}
+
+static unsigned int serial_cris_get_mctrl_dummy(struct uart_port *port)
+{
+ return 0;
+}
+
+static void serial_cris_stop_tx_dummy(struct uart_port *port)
+{
+}
+
+static void serial_cris_start_tx_dummy(struct uart_port *port)
+{
+ /* Discard outbound characters. */
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ struct circ_buf *xmit = &up->port.info->xmit;
+ xmit->tail = xmit->head;
+ uart_write_wakeup(port);
+}
+
+#define serial_cris_stop_rx_dummy serial_cris_stop_tx_dummy
+
+#define serial_cris_enable_ms_dummy serial_cris_stop_tx_dummy
+
+static void serial_cris_break_ctl_dummy(struct uart_port *port,
+ int break_state)
+{
+}
+
+static int serial_cris_startup_dummy(struct uart_port *port)
+{
+ return 0;
+}
+
+#define serial_cris_shutdown_dummy serial_cris_stop_tx_dummy
+
+static void
+serial_cris_set_termios_dummy(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+}
+
+#define serial_cris_release_port_dummy serial_cris_stop_tx_dummy
+#define serial_cris_request_port_dummy serial_cris_startup_dummy
+
+static const struct uart_ops serial_cris_dummy_pops = {
+ /*
+ * We *could* save one or two of those with different
+ * signature by casting and knowledge of the ABI, but it's
+ * just not worth the maintenance headache.
+ * For the ones we don't define here, the default (usually meaning
+ * "unimplemented") makes sense.
+ */
+ .tx_empty = serial_cris_tx_empty_dummy,
+ .set_mctrl = serial_cris_set_mctrl_dummy,
+ .get_mctrl = serial_cris_get_mctrl_dummy,
+ .stop_tx = serial_cris_stop_tx_dummy,
+ .start_tx = serial_cris_start_tx_dummy,
+ .stop_rx = serial_cris_stop_rx_dummy,
+ .enable_ms = serial_cris_enable_ms_dummy,
+ .break_ctl = serial_cris_break_ctl_dummy,
+ .startup = serial_cris_startup_dummy,
+ .shutdown = serial_cris_shutdown_dummy,
+ .set_termios = serial_cris_set_termios_dummy,
+
+ /* This one we keep the same. */
+ .type = serial_cris_type,
+
+ .release_port = serial_cris_release_port_dummy,
+ .request_port = serial_cris_request_port_dummy,
+
+ /*
+ * This one we keep the same too, as long as it doesn't do
+ * anything else but to set the type.
+ */
+ .config_port = serial_cris_config_port,
+};
+
+static void cris_serial_port_init(struct uart_port *port, int line)
+{
+ struct uart_cris_port *up = (struct uart_cris_port *)port;
+ static int first = 1;
+
+ if (up->initialized)
+ return;
+ up->initialized = 1;
+ port->line = line;
+ spin_lock_init(&port->lock);
+ port->ops =
+ up->regi_ser == 0 ? &serial_cris_dummy_pops :
+ &serial_cris_pops;
+ port->irq = up->irq;
+ port->iobase = up->regi_ser ? up->regi_ser : 1;
+ port->uartclk = 29493000;
+
+ /*
+ * We can't fit any more than 255 here (unsigned char), though
+ * actually UART_XMIT_SIZE characters could be pending output (if it
+ * wasn't for the single test in transmit_chars_dma). At time of this
+ * writing, the definition of "fifosize" is here the amount of
+ * characters that can be pending output after a start_tx call until
+ * tx_empty returns 1: see serial_core.c:uart_wait_until_sent. This
+ * matters for timeout calculations unfortunately, but keeping larger
+ * amounts at the DMA wouldn't win much so let's just play nice.
+ */
+ port->fifosize = 255;
+ port->flags = UPF_BOOT_AUTOCONF;
+
+#ifdef CONFIG_ETRAX_RS485
+ /* Set sane defaults. */
+ up->rs485.rts_on_send = 0;
+ up->rs485.rts_after_sent = 1;
+ up->rs485.delay_rts_before_send = 0;
+ if (up->port_type > TYPE_232)
+ up->rs485.enabled = 1;
+ else
+ up->rs485.enabled = 0;
+#endif
+
+ if (first) {
+ first = 0;
+#ifdef CONFIG_ETRAX_SERIAL_PORT0
+ SETUP_PINS(0);
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT1
+ SETUP_PINS(1);
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT2
+ SETUP_PINS(2);
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT3
+ SETUP_PINS(3);
+#endif
+ }
+}
+
+static int __init serial_cris_init(void)
+{
+ int ret, i;
+ reg_ser_rw_rec_ctrl rec_ctrl;
+ printk(KERN_INFO "Serial: CRISv32 driver $Revision: 1.78 $ ");
+
+ ret = uart_register_driver(&serial_cris_driver);
+ if (ret)
+ goto out;
+
+ for (i = 0; i < UART_NR; i++) {
+ if (serial_cris_ports[i].used) {
+#ifdef CONFIG_ETRAX_RS485
+ /* Make sure that the RTS pin stays low when allocating
+ * pins for a port in 485 mode.
+ */
+ if (serial_cris_ports[i].port_type > TYPE_232) {
+ rec_ctrl = REG_RD(ser, serial_cris_ports[i].regi_ser, rw_rec_ctrl);
+ rec_ctrl.rts_n = regk_ser_active;
+ REG_WR(ser, serial_cris_ports[i].regi_ser, rw_rec_ctrl, rec_ctrl);
+ }
+#endif
+ switch (serial_cris_ports[i].regi_ser) {
+ case regi_ser1:
+ if (crisv32_pinmux_alloc_fixed(pinmux_ser1)) {
+ printk("Failed to allocate pins for ser1, disable port\n");
+ serial_cris_ports[i].used = 0;
+ continue;
+ }
+ break;
+ case regi_ser2:
+ if (crisv32_pinmux_alloc_fixed(pinmux_ser2)) {
+ printk("Failed to allocate pins for ser2, disable port\n");
+ serial_cris_ports[i].used = 0;
+ continue;
+ }
+ break;
+ case regi_ser3:
+ if (crisv32_pinmux_alloc_fixed(pinmux_ser3)) {
+ printk("Failed to allocate pins for ser3, disable port\n");
+ serial_cris_ports[i].used = 0;
+ continue;
+ }
+ break;
+ }
+
+ struct uart_port *port = &serial_cris_ports[i].port;
+ cris_console.index = i;
+ cris_serial_port_init(port, i);
+ uart_add_one_port(&serial_cris_driver, port);
+ }
+ }
+
+out:
+ return ret;
+}
+
+static void __exit serial_cris_exit(void)
+{
+ int i;
+ for (i = 0; i < UART_NR; i++)
+ if (serial_cris_ports[i].used) {
+ switch (serial_cris_ports[i].regi_ser) {
+ case regi_ser1:
+ crisv32_pinmux_dealloc_fixed(pinmux_ser1);
+ break;
+ case regi_ser2:
+ crisv32_pinmux_dealloc_fixed(pinmux_ser2);
+ break;
+ case regi_ser3:
+ crisv32_pinmux_dealloc_fixed(pinmux_ser3);
+ break;
+ }
+ uart_remove_one_port(&serial_cris_driver,
+ &serial_cris_ports[i].port);
+ }
+ uart_unregister_driver(&serial_cris_driver);
+}
+
+module_init(serial_cris_init);
+module_exit(serial_cris_exit);
--- linux-2.6.19.2.orig/drivers/usb/host/hc_crisv10.c 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2.dev/drivers/usb/host/hc-crisv10.c 2007-02-26 20:58:29.000000000 +0100
@@ -1,219 +1,51 @@
/*
- * usb-host.c: ETRAX 100LX USB Host Controller Driver (HCD)
*
- * Copyright (c) 2002, 2003 Axis Communications AB.
+ * ETRAX 100LX USB Host Controller Driver
+ *
+ * Copyright (C) 2005, 2006 Axis Communications AB
+ *
+ * Author: Konrad Eriksson <konrad.eriksson@axis.se>
+ *
*/
+#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/unistd.h>
-#include <linux/interrupt.h>
#include <linux/init.h>
-#include <linux/list.h>
+#include <linux/moduleparam.h>
#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <linux/platform_device.h>
-#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/dma.h>
-#include <asm/system.h>
-#include <asm/arch/svinto.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/io_interface_mux.h>
-#include <linux/usb.h>
-/* Ugly include because we don't live with the other host drivers. */
-#include <../drivers/usb/core/hcd.h>
-#include <../drivers/usb/core/usb.h>
-
-#include "hc_crisv10.h"
+#include "../core/hcd.h"
+#include "../core/hub.h"
+#include "hc-crisv10.h"
+#include "hc-cris-dbg.h"
+
+
+/***************************************************************************/
+/***************************************************************************/
+/* Host Controller settings */
+/***************************************************************************/
+/***************************************************************************/
+
+#define VERSION "1.00"
+#define COPYRIGHT "(c) 2005, 2006 Axis Communications AB"
+#define DESCRIPTION "ETRAX 100LX USB Host Controller"
#define ETRAX_USB_HC_IRQ USB_HC_IRQ_NBR
#define ETRAX_USB_RX_IRQ USB_DMA_RX_IRQ_NBR
#define ETRAX_USB_TX_IRQ USB_DMA_TX_IRQ_NBR
-static const char *usb_hcd_version = "$Revision: 1.2 $";
-
-#undef KERN_DEBUG
-#define KERN_DEBUG ""
-
-
-#undef USB_DEBUG_RH
-#undef USB_DEBUG_EPID
-#undef USB_DEBUG_SB
-#undef USB_DEBUG_DESC
-#undef USB_DEBUG_URB
-#undef USB_DEBUG_TRACE
-#undef USB_DEBUG_BULK
-#undef USB_DEBUG_CTRL
-#undef USB_DEBUG_INTR
-#undef USB_DEBUG_ISOC
-
-#ifdef USB_DEBUG_RH
-#define dbg_rh(format, arg...) printk(KERN_DEBUG __FILE__ ": (RH) " format "\n" , ## arg)
-#else
-#define dbg_rh(format, arg...) do {} while (0)
-#endif
-
-#ifdef USB_DEBUG_EPID
-#define dbg_epid(format, arg...) printk(KERN_DEBUG __FILE__ ": (EPID) " format "\n" , ## arg)
-#else
-#define dbg_epid(format, arg...) do {} while (0)
-#endif
-
-#ifdef USB_DEBUG_SB
-#define dbg_sb(format, arg...) printk(KERN_DEBUG __FILE__ ": (SB) " format "\n" , ## arg)
-#else
-#define dbg_sb(format, arg...) do {} while (0)
-#endif
-
-#ifdef USB_DEBUG_CTRL
-#define dbg_ctrl(format, arg...) printk(KERN_DEBUG __FILE__ ": (CTRL) " format "\n" , ## arg)
-#else
-#define dbg_ctrl(format, arg...) do {} while (0)
-#endif
-
-#ifdef USB_DEBUG_BULK
-#define dbg_bulk(format, arg...) printk(KERN_DEBUG __FILE__ ": (BULK) " format "\n" , ## arg)
-#else
-#define dbg_bulk(format, arg...) do {} while (0)
-#endif
-
-#ifdef USB_DEBUG_INTR
-#define dbg_intr(format, arg...) printk(KERN_DEBUG __FILE__ ": (INTR) " format "\n" , ## arg)
-#else
-#define dbg_intr(format, arg...) do {} while (0)
-#endif
-
-#ifdef USB_DEBUG_ISOC
-#define dbg_isoc(format, arg...) printk(KERN_DEBUG __FILE__ ": (ISOC) " format "\n" , ## arg)
-#else
-#define dbg_isoc(format, arg...) do {} while (0)
-#endif
-
-#ifdef USB_DEBUG_TRACE
-#define DBFENTER (printk(": Entering: %s\n", __FUNCTION__))
-#define DBFEXIT (printk(": Exiting: %s\n", __FUNCTION__))
-#else
-#define DBFENTER do {} while (0)
-#define DBFEXIT do {} while (0)
-#endif
-
-#define usb_pipeslow(pipe) (((pipe) >> 26) & 1)
-
-/*-------------------------------------------------------------------
- Virtual Root Hub
- -------------------------------------------------------------------*/
-
-static __u8 root_hub_dev_des[] =
-{
- 0x12, /* __u8 bLength; */
- 0x01, /* __u8 bDescriptorType; Device */
- 0x00, /* __le16 bcdUSB; v1.0 */
- 0x01,
- 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
- 0x00, /* __u8 bDeviceSubClass; */
- 0x00, /* __u8 bDeviceProtocol; */
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
- 0x00, /* __le16 idVendor; */
- 0x00,
- 0x00, /* __le16 idProduct; */
- 0x00,
- 0x00, /* __le16 bcdDevice; */
- 0x00,
- 0x00, /* __u8 iManufacturer; */
- 0x02, /* __u8 iProduct; */
- 0x01, /* __u8 iSerialNumber; */
- 0x01 /* __u8 bNumConfigurations; */
-};
-
-/* Configuration descriptor */
-static __u8 root_hub_config_des[] =
-{
- 0x09, /* __u8 bLength; */
- 0x02, /* __u8 bDescriptorType; Configuration */
- 0x19, /* __le16 wTotalLength; */
- 0x00,
- 0x01, /* __u8 bNumInterfaces; */
- 0x01, /* __u8 bConfigurationValue; */
- 0x00, /* __u8 iConfiguration; */
- 0x40, /* __u8 bmAttributes; Bit 7: Bus-powered */
- 0x00, /* __u8 MaxPower; */
-
- /* interface */
- 0x09, /* __u8 if_bLength; */
- 0x04, /* __u8 if_bDescriptorType; Interface */
- 0x00, /* __u8 if_bInterfaceNumber; */
- 0x00, /* __u8 if_bAlternateSetting; */
- 0x01, /* __u8 if_bNumEndpoints; */
- 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
- 0x00, /* __u8 if_bInterfaceSubClass; */
- 0x00, /* __u8 if_bInterfaceProtocol; */
- 0x00, /* __u8 if_iInterface; */
-
- /* endpoint */
- 0x07, /* __u8 ep_bLength; */
- 0x05, /* __u8 ep_bDescriptorType; Endpoint */
- 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
- 0x03, /* __u8 ep_bmAttributes; Interrupt */
- 0x08, /* __le16 ep_wMaxPacketSize; 8 Bytes */
- 0x00,
- 0xff /* __u8 ep_bInterval; 255 ms */
-};
-
-static __u8 root_hub_hub_des[] =
-{
- 0x09, /* __u8 bLength; */
- 0x29, /* __u8 bDescriptorType; Hub-descriptor */
- 0x02, /* __u8 bNbrPorts; */
- 0x00, /* __u16 wHubCharacteristics; */
- 0x00,
- 0x01, /* __u8 bPwrOn2pwrGood; 2ms */
- 0x00, /* __u8 bHubContrCurrent; 0 mA */
- 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */
- 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */
-};
-
-static DEFINE_TIMER(bulk_start_timer, NULL, 0, 0);
-static DEFINE_TIMER(bulk_eot_timer, NULL, 0, 0);
-
-/* We want the start timer to expire before the eot timer, because the former might start
- traffic, thus making it unnecessary for the latter to time out. */
-#define BULK_START_TIMER_INTERVAL (HZ/10) /* 100 ms */
-#define BULK_EOT_TIMER_INTERVAL (HZ/10+2) /* 120 ms */
-
-#define OK(x) len = (x); dbg_rh("OK(%d): line: %d", x, __LINE__); break
-#define CHECK_ALIGN(x) if (((__u32)(x)) & 0x00000003) \
-{panic("Alignment check (DWORD) failed at %s:%s:%d\n", __FILE__, __FUNCTION__, __LINE__);}
-
-#define SLAB_FLAG (in_interrupt() ? SLAB_ATOMIC : SLAB_KERNEL)
-#define KMALLOC_FLAG (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL)
-
-/* Most helpful debugging aid */
-#define assert(expr) ((void) ((expr) ? 0 : (err("assert failed at line %d",__LINE__))))
-
-/* Alternative assert define which stops after a failed assert. */
-/*
-#define assert(expr) \
-{ \
- if (!(expr)) { \
- err("assert failed at line %d",__LINE__); \
- while (1); \
- } \
-}
-*/
-
+/* Number of physical ports in Etrax 100LX */
+#define USB_ROOT_HUB_PORTS 2
-/* FIXME: Should RX_BUF_SIZE be a config option, or maybe we should adjust it dynamically?
- To adjust it dynamically we would have to get an interrupt when we reach the end
- of the rx descriptor list, or when we get close to the end, and then allocate more
- descriptors. */
-
-#define NBR_OF_RX_DESC 512
-#define RX_DESC_BUF_SIZE 1024
-#define RX_BUF_SIZE (NBR_OF_RX_DESC * RX_DESC_BUF_SIZE)
+const char hc_name[] = "hc-crisv10";
+const char product_desc[] = DESCRIPTION;
/* The number of epids is, among other things, used for pre-allocating
ctrl, bulk and isoc EP descriptors (one for each epid).
@@ -221,4332 +53,4632 @@
#define NBR_OF_EPIDS 32
/* Support interrupt traffic intervals up to 128 ms. */
-#define MAX_INTR_INTERVAL 128
+#define MAX_INTR_INTERVAL 128
-/* If periodic traffic (intr or isoc) is to be used, then one entry in the EP table
- must be "invalid". By this we mean that we shouldn't care about epid attentions
- for this epid, or at least handle them differently from epid attentions for "valid"
- epids. This define determines which one to use (don't change it). */
-#define INVALID_EPID 31
+/* If periodic traffic (intr or isoc) is to be used, then one entry in the EP
+ table must be "invalid". By this we mean that we shouldn't care about epid
+ attentions for this epid, or at least handle them differently from epid
+ attentions for "valid" epids. This define determines which one to use
+ (don't change it). */
+#define INVALID_EPID 31
/* A special epid for the bulk dummys. */
-#define DUMMY_EPID 30
-
-/* This is just a software cache for the valid entries in R_USB_EPT_DATA. */
-static __u32 epid_usage_bitmask;
-
-/* A bitfield to keep information on in/out traffic is needed to uniquely identify
- an endpoint on a device, since the most significant bit which indicates traffic
- direction is lacking in the ep_id field (ETRAX epids can handle both in and
- out traffic on endpoints that are otherwise identical). The USB framework, however,
- relies on them to be handled separately. For example, bulk IN and OUT urbs cannot
- be queued in the same list, since they would block each other. */
-static __u32 epid_out_traffic;
-
-/* DMA IN cache bug. Align the DMA IN buffers to 32 bytes, i.e. a cache line.
- Since RX_DESC_BUF_SIZE is 1024 is a multiple of 32, all rx buffers will be cache aligned. */
-static volatile unsigned char RxBuf[RX_BUF_SIZE] __attribute__ ((aligned (32)));
-static volatile USB_IN_Desc_t RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned (4)));
-
-/* Pointers into RxDescList. */
-static volatile USB_IN_Desc_t *myNextRxDesc;
-static volatile USB_IN_Desc_t *myLastRxDesc;
-static volatile USB_IN_Desc_t *myPrevRxDesc;
-
-/* EP descriptors must be 32-bit aligned. */
-static volatile USB_EP_Desc_t TxCtrlEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
-static volatile USB_EP_Desc_t TxBulkEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
-/* After each enabled bulk EP (IN or OUT) we put two disabled EP descriptors with the eol flag set,
- causing the DMA to stop the DMA channel. The first of these two has the intr flag set, which
- gives us a dma8_sub0_descr interrupt. When we receive this, we advance the DMA one step in the
- EP list and then restart the bulk channel, thus forcing a switch between bulk EP descriptors
- in each frame. */
-static volatile USB_EP_Desc_t TxBulkDummyEPList[NBR_OF_EPIDS][2] __attribute__ ((aligned (4)));
-
-static volatile USB_EP_Desc_t TxIsocEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
-static volatile USB_SB_Desc_t TxIsocSB_zout __attribute__ ((aligned (4)));
-
-static volatile USB_EP_Desc_t TxIntrEPList[MAX_INTR_INTERVAL] __attribute__ ((aligned (4)));
-static volatile USB_SB_Desc_t TxIntrSB_zout __attribute__ ((aligned (4)));
-
-/* A zout transfer makes a memory access at the address of its buf pointer, which means that setting
- this buf pointer to 0 will cause an access to the flash. In addition to this, setting sw_len to 0
- results in a 16/32 bytes (depending on DMA burst size) transfer. Instead, we set it to 1, and point
- it to this buffer. */
-static int zout_buffer[4] __attribute__ ((aligned (4)));
+#define DUMMY_EPID 30
-/* Cache for allocating new EP and SB descriptors. */
-static kmem_cache_t *usb_desc_cache;
+/* Module settings */
-/* Cache for the registers allocated in the top half. */
-static kmem_cache_t *top_half_reg_cache;
+MODULE_DESCRIPTION(DESCRIPTION);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Konrad Eriksson <konrad.eriksson@axis.se>");
-/* Cache for the data allocated in the isoc descr top half. */
-static kmem_cache_t *isoc_compl_cache;
-static struct usb_bus *etrax_usb_bus;
+/* Module parameters */
-/* This is a circular (double-linked) list of the active urbs for each epid.
- The head is never removed, and new urbs are linked onto the list as
- urb_entry_t elements. Don't reference urb_list directly; use the wrapper
- functions instead. Note that working with these lists might require spinlock
- protection. */
-static struct list_head urb_list[NBR_OF_EPIDS];
+/* 0 = No ports enabled
+ 1 = Only port 1 enabled (on board ethernet on devboard)
+ 2 = Only port 2 enabled (external connector on devboard)
+ 3 = Both ports enabled
+*/
+static unsigned int ports = 3;
+module_param(ports, uint, S_IRUGO);
+MODULE_PARM_DESC(ports, "Bitmask indicating USB ports to use");
-/* Read about the need and usage of this lock in submit_ctrl_urb. */
-static spinlock_t urb_list_lock;
-/* Used when unlinking asynchronously. */
-static struct list_head urb_unlink_list;
+/***************************************************************************/
+/***************************************************************************/
+/* Shared global variables for this module */
+/***************************************************************************/
+/***************************************************************************/
-/* for returning string descriptors in UTF-16LE */
-static int ascii2utf (char *ascii, __u8 *utf, int utfmax)
-{
- int retval;
+/* EP descriptor lists for non period transfers. Must be 32-bit aligned. */
+static volatile struct USB_EP_Desc TxBulkEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
- for (retval = 0; *ascii && utfmax > 1; utfmax -= 2, retval += 2) {
- *utf++ = *ascii++ & 0x7f;
- *utf++ = 0;
- }
- return retval;
-}
+static volatile struct USB_EP_Desc TxCtrlEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
-static int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int len)
-{
- char buf [30];
+/* EP descriptor lists for period transfers. Must be 32-bit aligned. */
+static volatile struct USB_EP_Desc TxIntrEPList[MAX_INTR_INTERVAL] __attribute__ ((aligned (4)));
+static volatile struct USB_SB_Desc TxIntrSB_zout __attribute__ ((aligned (4)));
- // assert (len > (2 * (sizeof (buf) + 1)));
- // assert (strlen (type) <= 8);
+static volatile struct USB_EP_Desc TxIsocEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
+static volatile struct USB_SB_Desc TxIsocSB_zout __attribute__ ((aligned (4)));
- // language ids
- if (id == 0) {
- *data++ = 4; *data++ = 3; /* 4 bytes data */
- *data++ = 0; *data++ = 0; /* some language id */
- return 4;
-
- // serial number
- } else if (id == 1) {
- sprintf (buf, "%x", serial);
-
- // product description
- } else if (id == 2) {
- sprintf (buf, "USB %s Root Hub", type);
-
- // id 3 == vendor description
-
- // unsupported IDs --> "stall"
- } else
- return 0;
-
- data [0] = 2 + ascii2utf (buf, data + 2, len - 2);
- data [1] = 3;
- return data [0];
-}
+static volatile struct USB_SB_Desc TxIsocSBList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
-/* Wrappers around the list functions (include/linux/list.h). */
+/* After each enabled bulk EP IN we put two disabled EP descriptors with the eol flag set,
+ causing the DMA to stop the DMA channel. The first of these two has the intr flag set, which
+ gives us a dma8_sub0_descr interrupt. When we receive this, we advance the DMA one step in the
+ EP list and then restart the bulk channel, thus forcing a switch between bulk EP descriptors
+ in each frame. */
+static volatile struct USB_EP_Desc TxBulkDummyEPList[NBR_OF_EPIDS][2] __attribute__ ((aligned (4)));
-static inline int urb_list_empty(int epid)
+/* List of URB pointers, where each points to the active URB for a epid.
+ For Bulk, Ctrl and Intr this means which URB that currently is added to
+ DMA lists (Isoc URBs are all directly added to DMA lists). As soon as
+ URB has completed is the queue examined and the first URB in queue is
+ removed and moved to the activeUrbList while its state change to STARTED and
+ its transfer(s) gets added to DMA list (exception Isoc where URBs enter
+ state STARTED directly and added transfers added to DMA lists). */
+static struct urb *activeUrbList[NBR_OF_EPIDS];
+
+/* Additional software state info for each epid */
+static struct etrax_epid epid_state[NBR_OF_EPIDS];
+
+/* Timer handles for bulk traffic timer used to avoid DMA bug where DMA stops
+ even if there is new data waiting to be processed */
+static struct timer_list bulk_start_timer = TIMER_INITIALIZER(NULL, 0, 0);
+static struct timer_list bulk_eot_timer = TIMER_INITIALIZER(NULL, 0, 0);
+
+/* We want the start timer to expire before the eot timer, because the former
+ might start traffic, thus making it unnecessary for the latter to time
+ out. */
+#define BULK_START_TIMER_INTERVAL (HZ/50) /* 20 ms */
+#define BULK_EOT_TIMER_INTERVAL (HZ/16) /* 60 ms */
+
+/* Delay before a URB completion happen when it's scheduled to be delayed */
+#define LATER_TIMER_DELAY (HZ/50) /* 20 ms */
+
+/* Simplifying macros for checking software state info of a epid */
+/* ----------------------------------------------------------------------- */
+#define epid_inuse(epid) epid_state[epid].inuse
+#define epid_out_traffic(epid) epid_state[epid].out_traffic
+#define epid_isoc(epid) (epid_state[epid].type == PIPE_ISOCHRONOUS ? 1 : 0)
+#define epid_intr(epid) (epid_state[epid].type == PIPE_INTERRUPT ? 1 : 0)
+
+
+/***************************************************************************/
+/***************************************************************************/
+/* DEBUG FUNCTIONS */
+/***************************************************************************/
+/***************************************************************************/
+/* Note that these functions are always available in their "__" variants,
+ for use in error situations. The "__" missing variants are controlled by
+ the USB_DEBUG_DESC/USB_DEBUG_URB macros. */
+static void __dump_urb(struct urb* purb)
{
- return list_empty(&urb_list[epid]);
+ struct crisv10_urb_priv *urb_priv = purb->hcpriv;
+ int urb_num = -1;
+ if(urb_priv) {
+ urb_num = urb_priv->urb_num;
+ }
+ printk("\nURB:0x%x[%d]\n", (unsigned int)purb, urb_num);
+ printk("dev :0x%08lx\n", (unsigned long)purb->dev);
+ printk("pipe :0x%08x\n", purb->pipe);
+ printk("status :%d\n", purb->status);
+ printk("transfer_flags :0x%08x\n", purb->transfer_flags);
+ printk("transfer_buffer :0x%08lx\n", (unsigned long)purb->transfer_buffer);
+ printk("transfer_buffer_length:%d\n", purb->transfer_buffer_length);
+ printk("actual_length :%d\n", purb->actual_length);
+ printk("setup_packet :0x%08lx\n", (unsigned long)purb->setup_packet);
+ printk("start_frame :%d\n", purb->start_frame);
+ printk("number_of_packets :%d\n", purb->number_of_packets);
+ printk("interval :%d\n", purb->interval);
+ printk("error_count :%d\n", purb->error_count);
+ printk("context :0x%08lx\n", (unsigned long)purb->context);
+ printk("complete :0x%08lx\n\n", (unsigned long)purb->complete);
+}
+
+static void __dump_in_desc(volatile struct USB_IN_Desc *in)
+{
+ printk("\nUSB_IN_Desc at 0x%08lx\n", (unsigned long)in);
+ printk(" sw_len : 0x%04x (%d)\n", in->sw_len, in->sw_len);
+ printk(" command : 0x%04x\n", in->command);
+ printk(" next : 0x%08lx\n", in->next);
+ printk(" buf : 0x%08lx\n", in->buf);
+ printk(" hw_len : 0x%04x (%d)\n", in->hw_len, in->hw_len);
+ printk(" status : 0x%04x\n\n", in->status);
+}
+
+static void __dump_sb_desc(volatile struct USB_SB_Desc *sb)
+{
+ char tt = (sb->command & 0x30) >> 4;
+ char *tt_string;
+
+ switch (tt) {
+ case 0:
+ tt_string = "zout";
+ break;
+ case 1:
+ tt_string = "in";
+ break;
+ case 2:
+ tt_string = "out";
+ break;
+ case 3:
+ tt_string = "setup";
+ break;
+ default:
+ tt_string = "unknown (weird)";
+ }
+
+ printk(" USB_SB_Desc at 0x%08lx ", (unsigned long)sb);
+ printk(" command:0x%04x (", sb->command);
+ printk("rem:%d ", (sb->command & 0x3f00) >> 8);
+ printk("full:%d ", (sb->command & 0x40) >> 6);
+ printk("tt:%d(%s) ", tt, tt_string);
+ printk("intr:%d ", (sb->command & 0x8) >> 3);
+ printk("eot:%d ", (sb->command & 0x2) >> 1);
+ printk("eol:%d)", sb->command & 0x1);
+ printk(" sw_len:0x%04x(%d)", sb->sw_len, sb->sw_len);
+ printk(" next:0x%08lx", sb->next);
+ printk(" buf:0x%08lx\n", sb->buf);
+}
+
+
+static void __dump_ep_desc(volatile struct USB_EP_Desc *ep)
+{
+ printk("USB_EP_Desc at 0x%08lx ", (unsigned long)ep);
+ printk(" command:0x%04x (", ep->command);
+ printk("ep_id:%d ", (ep->command & 0x1f00) >> 8);
+ printk("enable:%d ", (ep->command & 0x10) >> 4);
+ printk("intr:%d ", (ep->command & 0x8) >> 3);
+ printk("eof:%d ", (ep->command & 0x2) >> 1);
+ printk("eol:%d)", ep->command & 0x1);
+ printk(" hw_len:0x%04x(%d)", ep->hw_len, ep->hw_len);
+ printk(" next:0x%08lx", ep->next);
+ printk(" sub:0x%08lx\n", ep->sub);
}
-/* Returns first urb for this epid, or NULL if list is empty. */
-static inline struct urb *urb_list_first(int epid)
+static inline void __dump_ep_list(int pipe_type)
{
- struct urb *first_urb = 0;
+ volatile struct USB_EP_Desc *ep;
+ volatile struct USB_EP_Desc *first_ep;
+ volatile struct USB_SB_Desc *sb;
+
+ switch (pipe_type)
+ {
+ case PIPE_BULK:
+ first_ep = &TxBulkEPList[0];
+ break;
+ case PIPE_CONTROL:
+ first_ep = &TxCtrlEPList[0];
+ break;
+ case PIPE_INTERRUPT:
+ first_ep = &TxIntrEPList[0];
+ break;
+ case PIPE_ISOCHRONOUS:
+ first_ep = &TxIsocEPList[0];
+ break;
+ default:
+ warn("Cannot dump unknown traffic type");
+ return;
+ }
+ ep = first_ep;
+
+ printk("\n\nDumping EP list...\n\n");
+
+ do {
+ __dump_ep_desc(ep);
+ /* Cannot phys_to_virt on 0 as it turns into 80000000, which is != 0. */
+ sb = ep->sub ? phys_to_virt(ep->sub) : 0;
+ while (sb) {
+ __dump_sb_desc(sb);
+ sb = sb->next ? phys_to_virt(sb->next) : 0;
+ }
+ ep = (volatile struct USB_EP_Desc *)(phys_to_virt(ep->next));
- if (!urb_list_empty(epid)) {
- /* Get the first urb (i.e. head->next). */
- urb_entry_t *urb_entry = list_entry((&urb_list[epid])->next, urb_entry_t, list);
- first_urb = urb_entry->urb;
- }
- return first_urb;
+ } while (ep != first_ep);
}
-/* Adds an urb_entry last in the list for this epid. */
-static inline void urb_list_add(struct urb *urb, int epid)
+static inline void __dump_ept_data(int epid)
{
- urb_entry_t *urb_entry = (urb_entry_t *)kmalloc(sizeof(urb_entry_t), KMALLOC_FLAG);
- assert(urb_entry);
+ unsigned long flags;
+ __u32 r_usb_ept_data;
- urb_entry->urb = urb;
- list_add_tail(&urb_entry->list, &urb_list[epid]);
+ if (epid < 0 || epid > 31) {
+ printk("Cannot dump ept data for invalid epid %d\n", epid);
+ return;
+ }
+
+ local_irq_save(flags);
+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
+ nop();
+ r_usb_ept_data = *R_USB_EPT_DATA;
+ local_irq_restore(flags);
+
+ printk(" R_USB_EPT_DATA = 0x%x for epid %d :\n", r_usb_ept_data, epid);
+ if (r_usb_ept_data == 0) {
+ /* No need for more detailed printing. */
+ return;
+ }
+ printk(" valid : %d\n", (r_usb_ept_data & 0x80000000) >> 31);
+ printk(" hold : %d\n", (r_usb_ept_data & 0x40000000) >> 30);
+ printk(" error_count_in : %d\n", (r_usb_ept_data & 0x30000000) >> 28);
+ printk(" t_in : %d\n", (r_usb_ept_data & 0x08000000) >> 27);
+ printk(" low_speed : %d\n", (r_usb_ept_data & 0x04000000) >> 26);
+ printk(" port : %d\n", (r_usb_ept_data & 0x03000000) >> 24);
+ printk(" error_code : %d\n", (r_usb_ept_data & 0x00c00000) >> 22);
+ printk(" t_out : %d\n", (r_usb_ept_data & 0x00200000) >> 21);
+ printk(" error_count_out : %d\n", (r_usb_ept_data & 0x00180000) >> 19);
+ printk(" max_len : %d\n", (r_usb_ept_data & 0x0003f800) >> 11);
+ printk(" ep : %d\n", (r_usb_ept_data & 0x00000780) >> 7);
+ printk(" dev : %d\n", (r_usb_ept_data & 0x0000003f));
+}
+
+static inline void __dump_ept_data_iso(int epid)
+{
+ unsigned long flags;
+ __u32 ept_data;
+
+ if (epid < 0 || epid > 31) {
+ printk("Cannot dump ept data for invalid epid %d\n", epid);
+ return;
+ }
+
+ local_irq_save(flags);
+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
+ nop();
+ ept_data = *R_USB_EPT_DATA_ISO;
+ local_irq_restore(flags);
+
+ printk(" R_USB_EPT_DATA = 0x%x for epid %d :\n", ept_data, epid);
+ if (ept_data == 0) {
+ /* No need for more detailed printing. */
+ return;
+ }
+ printk(" valid : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, valid,
+ ept_data));
+ printk(" port : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, port,
+ ept_data));
+ printk(" error_code : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code,
+ ept_data));
+ printk(" max_len : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, max_len,
+ ept_data));
+ printk(" ep : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, ep,
+ ept_data));
+ printk(" dev : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, dev,
+ ept_data));
}
-/* Search through the list for an element that contains this urb. (The list
- is expected to be short and the one we are about to delete will often be
- the first in the list.) */
-static inline urb_entry_t *__urb_list_entry(struct urb *urb, int epid)
+static inline void __dump_ept_data_list(void)
{
- struct list_head *entry;
- struct list_head *tmp;
- urb_entry_t *urb_entry;
-
- list_for_each_safe(entry, tmp, &urb_list[epid]) {
- urb_entry = list_entry(entry, urb_entry_t, list);
- assert(urb_entry);
- assert(urb_entry->urb);
-
- if (urb_entry->urb == urb) {
- return urb_entry;
- }
- }
- return 0;
-}
+ int i;
-/* Delete an urb from the list. */
-static inline void urb_list_del(struct urb *urb, int epid)
-{
- urb_entry_t *urb_entry = __urb_list_entry(urb, epid);
- assert(urb_entry);
+ printk("Dumping the whole R_USB_EPT_DATA list\n");
- /* Delete entry and free. */
- list_del(&urb_entry->list);
- kfree(urb_entry);
+ for (i = 0; i < 32; i++) {
+ __dump_ept_data(i);
+ }
+}
+
+static void debug_epid(int epid) {
+ int i;
+
+ if(epid_isoc(epid)) {
+ __dump_ept_data_iso(epid);
+ } else {
+ __dump_ept_data(epid);
+ }
+
+ printk("Bulk:\n");
+ for(i = 0; i < 32; i++) {
+ if(IO_EXTRACT(USB_EP_command, epid, TxBulkEPList[i].command) ==
+ epid) {
+ printk("%d: ", i); __dump_ep_desc(&(TxBulkEPList[i]));
+ }
+ }
+
+ printk("Ctrl:\n");
+ for(i = 0; i < 32; i++) {
+ if(IO_EXTRACT(USB_EP_command, epid, TxCtrlEPList[i].command) ==
+ epid) {
+ printk("%d: ", i); __dump_ep_desc(&(TxCtrlEPList[i]));
+ }
+ }
+
+ printk("Intr:\n");
+ for(i = 0; i < MAX_INTR_INTERVAL; i++) {
+ if(IO_EXTRACT(USB_EP_command, epid, TxIntrEPList[i].command) ==
+ epid) {
+ printk("%d: ", i); __dump_ep_desc(&(TxIntrEPList[i]));
+ }
+ }
+
+ printk("Isoc:\n");
+ for(i = 0; i < 32; i++) {
+ if(IO_EXTRACT(USB_EP_command, epid, TxIsocEPList[i].command) ==
+ epid) {
+ printk("%d: ", i); __dump_ep_desc(&(TxIsocEPList[i]));
+ }
+ }
+
+ __dump_ept_data_list();
+ __dump_ep_list(PIPE_INTERRUPT);
+ printk("\n\n");
+}
+
+
+
+char* hcd_status_to_str(__u8 bUsbStatus) {
+ static char hcd_status_str[128];
+ hcd_status_str[0] = '\0';
+ if(bUsbStatus & IO_STATE(R_USB_STATUS, ourun, yes)) {
+ strcat(hcd_status_str, "ourun ");
+ }
+ if(bUsbStatus & IO_STATE(R_USB_STATUS, perror, yes)) {
+ strcat(hcd_status_str, "perror ");
+ }
+ if(bUsbStatus & IO_STATE(R_USB_STATUS, device_mode, yes)) {
+ strcat(hcd_status_str, "device_mode ");
+ }
+ if(bUsbStatus & IO_STATE(R_USB_STATUS, host_mode, yes)) {
+ strcat(hcd_status_str, "host_mode ");
+ }
+ if(bUsbStatus & IO_STATE(R_USB_STATUS, started, yes)) {
+ strcat(hcd_status_str, "started ");
+ }
+ if(bUsbStatus & IO_STATE(R_USB_STATUS, running, yes)) {
+ strcat(hcd_status_str, "running ");
+ }
+ return hcd_status_str;
+}
+
+
+char* sblist_to_str(struct USB_SB_Desc* sb_desc) {
+ static char sblist_to_str_buff[128];
+ char tmp[32], tmp2[32];
+ sblist_to_str_buff[0] = '\0';
+ while(sb_desc != NULL) {
+ switch(IO_EXTRACT(USB_SB_command, tt, sb_desc->command)) {
+ case 0: sprintf(tmp, "zout"); break;
+ case 1: sprintf(tmp, "in"); break;
+ case 2: sprintf(tmp, "out"); break;
+ case 3: sprintf(tmp, "setup"); break;
+ }
+ sprintf(tmp2, "(%s %d)", tmp, sb_desc->sw_len);
+ strcat(sblist_to_str_buff, tmp2);
+ if(sb_desc->next != 0) {
+ sb_desc = phys_to_virt(sb_desc->next);
+ } else {
+ sb_desc = NULL;
+ }
+ }
+ return sblist_to_str_buff;
+}
+
+char* port_status_to_str(__u16 wPortStatus) {
+ static char port_status_str[128];
+ port_status_str[0] = '\0';
+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) {
+ strcat(port_status_str, "connected ");
+ }
+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) {
+ strcat(port_status_str, "enabled ");
+ }
+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, suspended, yes)) {
+ strcat(port_status_str, "suspended ");
+ }
+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, reset, yes)) {
+ strcat(port_status_str, "reset ");
+ }
+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, speed, full)) {
+ strcat(port_status_str, "full-speed ");
+ } else {
+ strcat(port_status_str, "low-speed ");
+ }
+ return port_status_str;
+}
+
+
+char* endpoint_to_str(struct usb_endpoint_descriptor *ed) {
+ static char endpoint_to_str_buff[128];
+ char tmp[32];
+ int epnum = ed->bEndpointAddress & 0x0F;
+ int dir = ed->bEndpointAddress & 0x80;
+ int type = ed->bmAttributes & 0x03;
+ endpoint_to_str_buff[0] = '\0';
+ sprintf(endpoint_to_str_buff, "ep:%d ", epnum);
+ switch(type) {
+ case 0:
+ sprintf(tmp, " ctrl");
+ break;
+ case 1:
+ sprintf(tmp, " isoc");
+ break;
+ case 2:
+ sprintf(tmp, " bulk");
+ break;
+ case 3:
+ sprintf(tmp, " intr");
+ break;
+ }
+ strcat(endpoint_to_str_buff, tmp);
+ if(dir) {
+ sprintf(tmp, " in");
+ } else {
+ sprintf(tmp, " out");
+ }
+ strcat(endpoint_to_str_buff, tmp);
+
+ return endpoint_to_str_buff;
+}
+
+/* Debug helper functions for Transfer Controller */
+char* pipe_to_str(unsigned int pipe) {
+ static char pipe_to_str_buff[128];
+ char tmp[64];
+ sprintf(pipe_to_str_buff, "dir:%s", str_dir(pipe));
+ sprintf(tmp, " type:%s", str_type(pipe));
+ strcat(pipe_to_str_buff, tmp);
+
+ sprintf(tmp, " dev:%d", usb_pipedevice(pipe));
+ strcat(pipe_to_str_buff, tmp);
+ sprintf(tmp, " ep:%d", usb_pipeendpoint(pipe));
+ strcat(pipe_to_str_buff, tmp);
+ return pipe_to_str_buff;
}
-/* Move an urb to the end of the list. */
-static inline void urb_list_move_last(struct urb *urb, int epid)
-{
- urb_entry_t *urb_entry = __urb_list_entry(urb, epid);
- assert(urb_entry);
-
- list_move_tail(&urb_entry->list, &urb_list[epid]);
-}
-/* Get the next urb in the list. */
-static inline struct urb *urb_list_next(struct urb *urb, int epid)
-{
- urb_entry_t *urb_entry = __urb_list_entry(urb, epid);
+#define USB_DEBUG_DESC 1
- assert(urb_entry);
+#ifdef USB_DEBUG_DESC
+#define dump_in_desc(x) __dump_in_desc(x)
+#define dump_sb_desc(...) __dump_sb_desc(...)
+#define dump_ep_desc(x) __dump_ep_desc(x)
+#define dump_ept_data(x) __dump_ept_data(x)
+#else
+#define dump_in_desc(...) do {} while (0)
+#define dump_sb_desc(...) do {} while (0)
+#define dump_ep_desc(...) do {} while (0)
+#endif
- if (urb_entry->list.next != &urb_list[epid]) {
- struct list_head *elem = urb_entry->list.next;
- urb_entry = list_entry(elem, urb_entry_t, list);
- return urb_entry->urb;
- } else {
- return NULL;
- }
-}
+/* Uncomment this to enable massive function call trace
+ #define USB_DEBUG_TRACE */
+#ifdef USB_DEBUG_TRACE
+#define DBFENTER (printk(": Entering: %s\n", __FUNCTION__))
+#define DBFEXIT (printk(": Exiting: %s\n", __FUNCTION__))
+#else
+#define DBFENTER do {} while (0)
+#define DBFEXIT do {} while (0)
+#endif
-/* For debug purposes only. */
-static inline void urb_list_dump(int epid)
-{
- struct list_head *entry;
- struct list_head *tmp;
- urb_entry_t *urb_entry;
- int i = 0;
-
- info("Dumping urb list for epid %d", epid);
-
- list_for_each_safe(entry, tmp, &urb_list[epid]) {
- urb_entry = list_entry(entry, urb_entry_t, list);
- info(" entry %d, urb = 0x%lx", i, (unsigned long)urb_entry->urb);
- }
-}
+#define CHECK_ALIGN(x) if (((__u32)(x)) & 0x00000003) \
+{panic("Alignment check (DWORD) failed at %s:%s:%d\n", __FILE__, __FUNCTION__, __LINE__);}
-static void init_rx_buffers(void);
-static int etrax_rh_unlink_urb(struct urb *urb);
-static void etrax_rh_send_irq(struct urb *urb);
-static void etrax_rh_init_int_timer(struct urb *urb);
-static void etrax_rh_int_timer_do(unsigned long ptr);
-
-static int etrax_usb_setup_epid(struct urb *urb);
-static int etrax_usb_lookup_epid(struct urb *urb);
-static int etrax_usb_allocate_epid(void);
-static void etrax_usb_free_epid(int epid);
-
-static int etrax_remove_from_sb_list(struct urb *urb);
-
-static void* etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size,
- unsigned mem_flags, dma_addr_t *dma);
-static void etrax_usb_buffer_free(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma);
-
-static void etrax_usb_add_to_bulk_sb_list(struct urb *urb, int epid);
-static void etrax_usb_add_to_ctrl_sb_list(struct urb *urb, int epid);
-static void etrax_usb_add_to_intr_sb_list(struct urb *urb, int epid);
-static void etrax_usb_add_to_isoc_sb_list(struct urb *urb, int epid);
-
-static int etrax_usb_submit_bulk_urb(struct urb *urb);
-static int etrax_usb_submit_ctrl_urb(struct urb *urb);
-static int etrax_usb_submit_intr_urb(struct urb *urb);
-static int etrax_usb_submit_isoc_urb(struct urb *urb);
-
-static int etrax_usb_submit_urb(struct urb *urb, unsigned mem_flags);
-static int etrax_usb_unlink_urb(struct urb *urb, int status);
-static int etrax_usb_get_frame_number(struct usb_device *usb_dev);
-
-static irqreturn_t etrax_usb_tx_interrupt(int irq, void *vhc);
-static irqreturn_t etrax_usb_rx_interrupt(int irq, void *vhc);
-static irqreturn_t etrax_usb_hc_interrupt_top_half(int irq, void *vhc);
-static void etrax_usb_hc_interrupt_bottom_half(void *data);
-
-static void etrax_usb_isoc_descr_interrupt_bottom_half(void *data);
-
-
-/* The following is a list of interrupt handlers for the host controller interrupts we use.
- They are called from etrax_usb_hc_interrupt_bottom_half. */
-static void etrax_usb_hc_isoc_eof_interrupt(void);
-static void etrax_usb_hc_bulk_eot_interrupt(int timer_induced);
-static void etrax_usb_hc_epid_attn_interrupt(usb_interrupt_registers_t *reg);
-static void etrax_usb_hc_port_status_interrupt(usb_interrupt_registers_t *reg);
-static void etrax_usb_hc_ctl_status_interrupt(usb_interrupt_registers_t *reg);
-
-static int etrax_rh_submit_urb (struct urb *urb);
-
-/* Forward declaration needed because they are used in the rx interrupt routine. */
-static void etrax_usb_complete_urb(struct urb *urb, int status);
-static void etrax_usb_complete_bulk_urb(struct urb *urb, int status);
-static void etrax_usb_complete_ctrl_urb(struct urb *urb, int status);
-static void etrax_usb_complete_intr_urb(struct urb *urb, int status);
-static void etrax_usb_complete_isoc_urb(struct urb *urb, int status);
+/* Most helpful debugging aid */
+#define ASSERT(expr) ((void) ((expr) ? 0 : (err("assert failed at: %s %d",__FUNCTION__, __LINE__))))
-static int etrax_usb_hc_init(void);
-static void etrax_usb_hc_cleanup(void);
-static struct usb_operations etrax_usb_device_operations =
-{
- .get_frame_number = etrax_usb_get_frame_number,
- .submit_urb = etrax_usb_submit_urb,
- .unlink_urb = etrax_usb_unlink_urb,
- .buffer_alloc = etrax_usb_buffer_alloc,
- .buffer_free = etrax_usb_buffer_free
-};
+/***************************************************************************/
+/***************************************************************************/
+/* Forward declarations */
+/***************************************************************************/
+/***************************************************************************/
+void crisv10_hcd_epid_attn_irq(struct crisv10_irq_reg *reg);
+void crisv10_hcd_port_status_irq(struct crisv10_irq_reg *reg);
+void crisv10_hcd_ctl_status_irq(struct crisv10_irq_reg *reg);
+void crisv10_hcd_isoc_eof_irq(struct crisv10_irq_reg *reg);
+
+void rh_port_status_change(__u16[]);
+int rh_clear_port_feature(__u8, __u16);
+int rh_set_port_feature(__u8, __u16);
+static void rh_disable_port(unsigned int port);
+
+static void check_finished_bulk_tx_epids(struct usb_hcd *hcd,
+ int timer);
+
+static int tc_setup_epid(struct usb_host_endpoint *ep, struct urb *urb,
+ int mem_flags);
+static void tc_free_epid(struct usb_host_endpoint *ep);
+static int tc_allocate_epid(void);
+static void tc_finish_urb(struct usb_hcd *hcd, struct urb *urb, int status);
+static void tc_finish_urb_later(struct usb_hcd *hcd, struct urb *urb,
+ int status);
+
+static int urb_priv_create(struct usb_hcd *hcd, struct urb *urb, int epid,
+ int mem_flags);
+static void urb_priv_free(struct usb_hcd *hcd, struct urb *urb);
+
+static inline struct urb *urb_list_first(int epid);
+static inline void urb_list_add(struct urb *urb, int epid,
+ int mem_flags);
+static inline urb_entry_t *urb_list_entry(struct urb *urb, int epid);
+static inline void urb_list_del(struct urb *urb, int epid);
+static inline void urb_list_move_last(struct urb *urb, int epid);
+static inline struct urb *urb_list_next(struct urb *urb, int epid);
+
+int create_sb_for_urb(struct urb *urb, int mem_flags);
+int init_intr_urb(struct urb *urb, int mem_flags);
+
+static inline void etrax_epid_set(__u8 index, __u32 data);
+static inline void etrax_epid_clear_error(__u8 index);
+static inline void etrax_epid_set_toggle(__u8 index, __u8 dirout,
+ __u8 toggle);
+static inline __u8 etrax_epid_get_toggle(__u8 index, __u8 dirout);
+static inline __u32 etrax_epid_get(__u8 index);
+
+/* We're accessing the same register position in Etrax so
+ when we do full access the internal difference doesn't matter */
+#define etrax_epid_iso_set(index, data) etrax_epid_set(index, data)
+#define etrax_epid_iso_get(index) etrax_epid_get(index)
+
+
+static void tc_dma_process_isoc_urb(struct urb *urb);
+static void tc_dma_process_queue(int epid);
+static void tc_dma_unlink_intr_urb(struct urb *urb);
+static irqreturn_t tc_dma_tx_interrupt(int irq, void *vhc);
+static irqreturn_t tc_dma_rx_interrupt(int irq, void *vhc);
+
+static void tc_bulk_start_timer_func(unsigned long dummy);
+static void tc_bulk_eot_timer_func(unsigned long dummy);
+
+
+/*************************************************************/
+/*************************************************************/
+/* Host Controler Driver block */
+/*************************************************************/
+/*************************************************************/
+
+/* HCD operations */
+static irqreturn_t crisv10_hcd_top_irq(int irq, void*);
+static int crisv10_hcd_reset(struct usb_hcd *);
+static int crisv10_hcd_start(struct usb_hcd *);
+static void crisv10_hcd_stop(struct usb_hcd *);
+#ifdef CONFIG_PM
+static int crisv10_hcd_suspend(struct device *, u32, u32);
+static int crisv10_hcd_resume(struct device *, u32);
+#endif /* CONFIG_PM */
+static int crisv10_hcd_get_frame(struct usb_hcd *);
+
+static int tc_urb_enqueue(struct usb_hcd *, struct usb_host_endpoint *ep, struct urb *, gfp_t mem_flags);
+static int tc_urb_dequeue(struct usb_hcd *, struct urb *);
+static void tc_endpoint_disable(struct usb_hcd *, struct usb_host_endpoint *ep);
+
+static int rh_status_data_request(struct usb_hcd *, char *);
+static int rh_control_request(struct usb_hcd *, u16, u16, u16, char*, u16);
+
+#ifdef CONFIG_PM
+static int crisv10_hcd_hub_suspend(struct usb_hcd *);
+static int crisv10_hcd_hub_resume(struct usb_hcd *);
+#endif /* CONFIG_PM */
+#ifdef CONFIG_USB_OTG
+static int crisv10_hcd_start_port_reset(struct usb_hcd *, unsigned);
+#endif /* CONFIG_USB_OTG */
+
+/* host controller driver interface */
+static const struct hc_driver crisv10_hc_driver =
+ {
+ .description = hc_name,
+ .product_desc = product_desc,
+ .hcd_priv_size = sizeof(struct crisv10_hcd),
+
+ /* Attaching IRQ handler manualy in probe() */
+ /* .irq = crisv10_hcd_irq, */
+
+ .flags = HCD_USB11,
+
+ /* called to init HCD and root hub */
+ .reset = crisv10_hcd_reset,
+ .start = crisv10_hcd_start,
+
+ /* cleanly make HCD stop writing memory and doing I/O */
+ .stop = crisv10_hcd_stop,
+
+ /* return current frame number */
+ .get_frame_number = crisv10_hcd_get_frame,
+
+
+ /* Manage i/o requests via the Transfer Controller */
+ .urb_enqueue = tc_urb_enqueue,
+ .urb_dequeue = tc_urb_dequeue,
+
+ /* hw synch, freeing endpoint resources that urb_dequeue can't */
+ .endpoint_disable = tc_endpoint_disable,
+
+
+ /* Root Hub support */
+ .hub_status_data = rh_status_data_request,
+ .hub_control = rh_control_request,
+#ifdef CONFIG_PM
+ .hub_suspend = rh_suspend_request,
+ .hub_resume = rh_resume_request,
+#endif /* CONFIG_PM */
+#ifdef CONFIG_USB_OTG
+ .start_port_reset = crisv10_hcd_start_port_reset,
+#endif /* CONFIG_USB_OTG */
+ };
-/* Note that these functions are always available in their "__" variants, for use in
- error situations. The "__" missing variants are controlled by the USB_DEBUG_DESC/
- USB_DEBUG_URB macros. */
-static void __dump_urb(struct urb* purb)
-{
- printk("\nurb :0x%08lx\n", (unsigned long)purb);
- printk("dev :0x%08lx\n", (unsigned long)purb->dev);
- printk("pipe :0x%08x\n", purb->pipe);
- printk("status :%d\n", purb->status);
- printk("transfer_flags :0x%08x\n", purb->transfer_flags);
- printk("transfer_buffer :0x%08lx\n", (unsigned long)purb->transfer_buffer);
- printk("transfer_buffer_length:%d\n", purb->transfer_buffer_length);
- printk("actual_length :%d\n", purb->actual_length);
- printk("setup_packet :0x%08lx\n", (unsigned long)purb->setup_packet);
- printk("start_frame :%d\n", purb->start_frame);
- printk("number_of_packets :%d\n", purb->number_of_packets);
- printk("interval :%d\n", purb->interval);
- printk("error_count :%d\n", purb->error_count);
- printk("context :0x%08lx\n", (unsigned long)purb->context);
- printk("complete :0x%08lx\n\n", (unsigned long)purb->complete);
-}
-static void __dump_in_desc(volatile USB_IN_Desc_t *in)
-{
- printk("\nUSB_IN_Desc at 0x%08lx\n", (unsigned long)in);
- printk(" sw_len : 0x%04x (%d)\n", in->sw_len, in->sw_len);
- printk(" command : 0x%04x\n", in->command);
- printk(" next : 0x%08lx\n", in->next);
- printk(" buf : 0x%08lx\n", in->buf);
- printk(" hw_len : 0x%04x (%d)\n", in->hw_len, in->hw_len);
- printk(" status : 0x%04x\n\n", in->status);
-}
+/*
+ * conversion between pointers to a hcd and the corresponding
+ * crisv10_hcd
+ */
-static void __dump_sb_desc(volatile USB_SB_Desc_t *sb)
+static inline struct crisv10_hcd *hcd_to_crisv10_hcd(struct usb_hcd *hcd)
{
- char tt = (sb->command & 0x30) >> 4;
- char *tt_string;
-
- switch (tt) {
- case 0:
- tt_string = "zout";
- break;
- case 1:
- tt_string = "in";
- break;
- case 2:
- tt_string = "out";
- break;
- case 3:
- tt_string = "setup";
- break;
- default:
- tt_string = "unknown (weird)";
- }
-
- printk("\n USB_SB_Desc at 0x%08lx\n", (unsigned long)sb);
- printk(" command : 0x%04x\n", sb->command);
- printk(" rem : %d\n", (sb->command & 0x3f00) >> 8);
- printk(" full : %d\n", (sb->command & 0x40) >> 6);
- printk(" tt : %d (%s)\n", tt, tt_string);
- printk(" intr : %d\n", (sb->command & 0x8) >> 3);
- printk(" eot : %d\n", (sb->command & 0x2) >> 1);
- printk(" eol : %d\n", sb->command & 0x1);
- printk(" sw_len : 0x%04x (%d)\n", sb->sw_len, sb->sw_len);
- printk(" next : 0x%08lx\n", sb->next);
- printk(" buf : 0x%08lx\n\n", sb->buf);
+ return (struct crisv10_hcd *) hcd->hcd_priv;
}
-
-static void __dump_ep_desc(volatile USB_EP_Desc_t *ep)
+static inline struct usb_hcd *crisv10_hcd_to_hcd(struct crisv10_hcd *hcd)
{
- printk("\nUSB_EP_Desc at 0x%08lx\n", (unsigned long)ep);
- printk(" command : 0x%04x\n", ep->command);
- printk(" ep_id : %d\n", (ep->command & 0x1f00) >> 8);
- printk(" enable : %d\n", (ep->command & 0x10) >> 4);
- printk(" intr : %d\n", (ep->command & 0x8) >> 3);
- printk(" eof : %d\n", (ep->command & 0x2) >> 1);
- printk(" eol : %d\n", ep->command & 0x1);
- printk(" hw_len : 0x%04x (%d)\n", ep->hw_len, ep->hw_len);
- printk(" next : 0x%08lx\n", ep->next);
- printk(" sub : 0x%08lx\n\n", ep->sub);
+ return container_of((void *) hcd, struct usb_hcd, hcd_priv);
}
-static inline void __dump_ep_list(int pipe_type)
+/* check if specified port is in use */
+static inline int port_in_use(unsigned int port)
{
- volatile USB_EP_Desc_t *ep;
- volatile USB_EP_Desc_t *first_ep;
- volatile USB_SB_Desc_t *sb;
-
- switch (pipe_type)
- {
- case PIPE_BULK:
- first_ep = &TxBulkEPList[0];
- break;
- case PIPE_CONTROL:
- first_ep = &TxCtrlEPList[0];
- break;
- case PIPE_INTERRUPT:
- first_ep = &TxIntrEPList[0];
- break;
- case PIPE_ISOCHRONOUS:
- first_ep = &TxIsocEPList[0];
- break;
- default:
- warn("Cannot dump unknown traffic type");
- return;
- }
- ep = first_ep;
-
- printk("\n\nDumping EP list...\n\n");
-
- do {
- __dump_ep_desc(ep);
- /* Cannot phys_to_virt on 0 as it turns into 80000000, which is != 0. */
- sb = ep->sub ? phys_to_virt(ep->sub) : 0;
- while (sb) {
- __dump_sb_desc(sb);
- sb = sb->next ? phys_to_virt(sb->next) : 0;
- }
- ep = (volatile USB_EP_Desc_t *)(phys_to_virt(ep->next));
-
- } while (ep != first_ep);
+ return ports & (1 << port);
}
-static inline void __dump_ept_data(int epid)
+/* number of ports in use */
+static inline unsigned int num_ports(void)
{
- unsigned long flags;
- __u32 r_usb_ept_data;
-
- if (epid < 0 || epid > 31) {
- printk("Cannot dump ept data for invalid epid %d\n", epid);
- return;
- }
-
- save_flags(flags);
- cli();
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
- nop();
- r_usb_ept_data = *R_USB_EPT_DATA;
- restore_flags(flags);
-
- printk("\nR_USB_EPT_DATA = 0x%x for epid %d :\n", r_usb_ept_data, epid);
- if (r_usb_ept_data == 0) {
- /* No need for more detailed printing. */
- return;
- }
- printk(" valid : %d\n", (r_usb_ept_data & 0x80000000) >> 31);
- printk(" hold : %d\n", (r_usb_ept_data & 0x40000000) >> 30);
- printk(" error_count_in : %d\n", (r_usb_ept_data & 0x30000000) >> 28);
- printk(" t_in : %d\n", (r_usb_ept_data & 0x08000000) >> 27);
- printk(" low_speed : %d\n", (r_usb_ept_data & 0x04000000) >> 26);
- printk(" port : %d\n", (r_usb_ept_data & 0x03000000) >> 24);
- printk(" error_code : %d\n", (r_usb_ept_data & 0x00c00000) >> 22);
- printk(" t_out : %d\n", (r_usb_ept_data & 0x00200000) >> 21);
- printk(" error_count_out : %d\n", (r_usb_ept_data & 0x00180000) >> 19);
- printk(" max_len : %d\n", (r_usb_ept_data & 0x0003f800) >> 11);
- printk(" ep : %d\n", (r_usb_ept_data & 0x00000780) >> 7);
- printk(" dev : %d\n", (r_usb_ept_data & 0x0000003f));
+ unsigned int i, num = 0;
+ for (i = 0; i < USB_ROOT_HUB_PORTS; i++)
+ if (port_in_use(i))
+ num++;
+ return num;
}
-static inline void __dump_ept_data_list(void)
+/* map hub port number to the port number used internally by the HC */
+static inline unsigned int map_port(unsigned int port)
{
- int i;
-
- printk("Dumping the whole R_USB_EPT_DATA list\n");
-
- for (i = 0; i < 32; i++) {
- __dump_ept_data(i);
- }
+ unsigned int i, num = 0;
+ for (i = 0; i < USB_ROOT_HUB_PORTS; i++)
+ if (port_in_use(i))
+ if (++num == port)
+ return i;
+ return -1;
}
-#ifdef USB_DEBUG_DESC
-#define dump_in_desc(...) __dump_in_desc(...)
-#define dump_sb_desc(...) __dump_sb_desc(...)
-#define dump_ep_desc(...) __dump_ep_desc(...)
-#else
-#define dump_in_desc(...) do {} while (0)
-#define dump_sb_desc(...) do {} while (0)
-#define dump_ep_desc(...) do {} while (0)
-#endif
-#ifdef USB_DEBUG_URB
-#define dump_urb(x) __dump_urb(x)
-#else
-#define dump_urb(x) do {} while (0)
+/* size of descriptors in slab cache */
+#ifndef MAX
+#define MAX(x, y) ((x) > (y) ? (x) : (y))
#endif
-static void init_rx_buffers(void)
-{
- int i;
- DBFENTER;
+/******************************************************************/
+/* Hardware Interrupt functions */
+/******************************************************************/
+
+/* Fast interrupt handler for HC */
+static irqreturn_t crisv10_hcd_top_irq(int irq, void *vcd)
+{
+ struct usb_hcd *hcd = vcd;
+ struct crisv10_irq_reg reg;
+ __u32 irq_mask;
+ unsigned long flags;
+
+ DBFENTER;
+
+ ASSERT(hcd != NULL);
+ reg.hcd = hcd;
+
+ /* Turn of other interrupts while handling these sensitive cases */
+ local_irq_save(flags);
+
+ /* Read out which interrupts that are flaged */
+ irq_mask = *R_USB_IRQ_MASK_READ;
+ reg.r_usb_irq_mask_read = irq_mask;
+
+ /* Reading R_USB_STATUS clears the ctl_status interrupt. Note that
+ R_USB_STATUS must be read before R_USB_EPID_ATTN since reading the latter
+ clears the ourun and perror fields of R_USB_STATUS. */
+ reg.r_usb_status = *R_USB_STATUS;
+
+ /* Reading R_USB_EPID_ATTN clears the iso_eof, bulk_eot and epid_attn
+ interrupts. */
+ reg.r_usb_epid_attn = *R_USB_EPID_ATTN;
+
+ /* Reading R_USB_RH_PORT_STATUS_1 and R_USB_RH_PORT_STATUS_2 clears the
+ port_status interrupt. */
+ reg.r_usb_rh_port_status_1 = *R_USB_RH_PORT_STATUS_1;
+ reg.r_usb_rh_port_status_2 = *R_USB_RH_PORT_STATUS_2;
+
+ /* Reading R_USB_FM_NUMBER clears the sof interrupt. */
+ /* Note: the lower 11 bits contain the actual frame number, sent with each
+ sof. */
+ reg.r_usb_fm_number = *R_USB_FM_NUMBER;
+
+ /* Interrupts are handled in order of priority. */
+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, port_status)) {
+ crisv10_hcd_port_status_irq(&reg);
+ }
+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, epid_attn)) {
+ crisv10_hcd_epid_attn_irq(&reg);
+ }
+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, ctl_status)) {
+ crisv10_hcd_ctl_status_irq(&reg);
+ }
+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, iso_eof)) {
+ crisv10_hcd_isoc_eof_irq(&reg);
+ }
+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, bulk_eot)) {
+ /* Update/restart the bulk start timer since obviously the channel is
+ running. */
+ mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL);
+ /* Update/restart the bulk eot timer since we just received an bulk eot
+ interrupt. */
+ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
+
+ /* Check for finished bulk transfers on epids */
+ check_finished_bulk_tx_epids(hcd, 0);
+ }
+ local_irq_restore(flags);
+
+ DBFEXIT;
+ return IRQ_HANDLED;
+}
+
+
+void crisv10_hcd_epid_attn_irq(struct crisv10_irq_reg *reg) {
+ struct usb_hcd *hcd = reg->hcd;
+ struct crisv10_urb_priv *urb_priv;
+ int epid;
+ DBFENTER;
+
+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
+ if (test_bit(epid, (void *)&reg->r_usb_epid_attn)) {
+ struct urb *urb;
+ __u32 ept_data;
+ int error_code;
+
+ if (epid == DUMMY_EPID || epid == INVALID_EPID) {
+ /* We definitely don't care about these ones. Besides, they are
+ always disabled, so any possible disabling caused by the
+ epid attention interrupt is irrelevant. */
+ warn("Got epid_attn for INVALID_EPID or DUMMY_EPID (%d).", epid);
+ continue;
+ }
+
+ if(!epid_inuse(epid)) {
+ irq_err("Epid attention on epid:%d that isn't in use\n", epid);
+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
+ debug_epid(epid);
+ continue;
+ }
+
+ /* Note that although there are separate R_USB_EPT_DATA and
+ R_USB_EPT_DATA_ISO registers, they are located at the same address and
+ are of the same size. In other words, this read should be ok for isoc
+ also. */
+ ept_data = etrax_epid_get(epid);
+ error_code = IO_EXTRACT(R_USB_EPT_DATA, error_code, ept_data);
+
+ /* Get the active URB for this epid. We blatantly assume
+ that only this URB could have caused the epid attention. */
+ urb = activeUrbList[epid];
+ if (urb == NULL) {
+ irq_err("Attention on epid:%d error:%d with no active URB.\n",
+ epid, error_code);
+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
+ debug_epid(epid);
+ continue;
+ }
+
+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
+ ASSERT(urb_priv);
+
+ /* Using IO_STATE_VALUE on R_USB_EPT_DATA should be ok for isoc also. */
+ if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
+
+ /* Isoc traffic doesn't have error_count_in/error_count_out. */
+ if ((usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) &&
+ (IO_EXTRACT(R_USB_EPT_DATA, error_count_in, ept_data) == 3 ||
+ IO_EXTRACT(R_USB_EPT_DATA, error_count_out, ept_data) == 3)) {
+ /* Check if URB allready is marked for late-finish, we can get
+ several 3rd error for Intr traffic when a device is unplugged */
+ if(urb_priv->later_data == NULL) {
+ /* 3rd error. */
+ irq_warn("3rd error for epid:%d (%s %s) URB:0x%x[%d]\n", epid,
+ str_dir(urb->pipe), str_type(urb->pipe),
+ (unsigned int)urb, urb_priv->urb_num);
+
+ tc_finish_urb_later(hcd, urb, -EPROTO);
+ }
+
+ } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) {
+ irq_warn("Perror for epid:%d\n", epid);
+ printk("FM_NUMBER: %d\n", reg->r_usb_fm_number & 0x7ff);
+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
+ __dump_urb(urb);
+ debug_epid(epid);
+
+ if (!(ept_data & IO_MASK(R_USB_EPT_DATA, valid))) {
+ /* invalid ep_id */
+ panic("Perror because of invalid epid."
+ " Deconfigured too early?");
+ } else {
+ /* past eof1, near eof, zout transfer, setup transfer */
+ /* Dump the urb and the relevant EP descriptor. */
+ panic("Something wrong with DMA descriptor contents."
+ " Too much traffic inserted?");
+ }
+ } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) {
+ /* buffer ourun */
+ printk("FM_NUMBER: %d\n", reg->r_usb_fm_number & 0x7ff);
+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
+ __dump_urb(urb);
+ debug_epid(epid);
- for (i = 0; i < (NBR_OF_RX_DESC - 1); i++) {
- RxDescList[i].sw_len = RX_DESC_BUF_SIZE;
- RxDescList[i].command = 0;
- RxDescList[i].next = virt_to_phys(&RxDescList[i + 1]);
- RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE));
- RxDescList[i].hw_len = 0;
- RxDescList[i].status = 0;
-
- /* DMA IN cache bug. (struct etrax_dma_descr has the same layout as USB_IN_Desc
- for the relevant fields.) */
- prepare_rx_descriptor((struct etrax_dma_descr*)&RxDescList[i]);
+ panic("Buffer overrun/underrun for epid:%d. DMA too busy?", epid);
+ } else {
+ irq_warn("Attention on epid:%d (%s %s) with no error code\n", epid,
+ str_dir(urb->pipe), str_type(urb->pipe));
+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
+ __dump_urb(urb);
+ debug_epid(epid);
+ }
+ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code,
+ stall)) {
+ /* Not really a protocol error, just says that the endpoint gave
+ a stall response. Note that error_code cannot be stall for isoc. */
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+ panic("Isoc traffic cannot stall");
}
- RxDescList[i].sw_len = RX_DESC_BUF_SIZE;
- RxDescList[i].command = IO_STATE(USB_IN_command, eol, yes);
- RxDescList[i].next = virt_to_phys(&RxDescList[0]);
- RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE));
- RxDescList[i].hw_len = 0;
- RxDescList[i].status = 0;
+ tc_dbg("Stall for epid:%d (%s %s) URB:0x%x\n", epid,
+ str_dir(urb->pipe), str_type(urb->pipe), (unsigned int)urb);
+ tc_finish_urb(hcd, urb, -EPIPE);
+
+ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code,
+ bus_error)) {
+ /* Two devices responded to a transaction request. Must be resolved
+ by software. FIXME: Reset ports? */
+ panic("Bus error for epid %d."
+ " Two devices responded to transaction request\n",
+ epid);
+
+ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code,
+ buffer_error)) {
+ /* DMA overrun or underrun. */
+ irq_warn("Buffer overrun/underrun for epid:%d (%s %s)\n", epid,
+ str_dir(urb->pipe), str_type(urb->pipe));
+
+ /* It seems that error_code = buffer_error in
+ R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS
+ are the same error. */
+ tc_finish_urb(hcd, urb, -EPROTO);
+ } else {
+ irq_warn("Unknown attention on epid:%d (%s %s)\n", epid,
+ str_dir(urb->pipe), str_type(urb->pipe));
+ dump_ept_data(epid);
+ }
+ }
+ }
+ DBFEXIT;
+}
+
+void crisv10_hcd_port_status_irq(struct crisv10_irq_reg *reg)
+{
+ __u16 port_reg[USB_ROOT_HUB_PORTS];
+ DBFENTER;
+ port_reg[0] = reg->r_usb_rh_port_status_1;
+ port_reg[1] = reg->r_usb_rh_port_status_2;
+ rh_port_status_change(port_reg);
+ DBFEXIT;
+}
+
+void crisv10_hcd_isoc_eof_irq(struct crisv10_irq_reg *reg)
+{
+ int epid;
+ struct urb *urb;
+ struct crisv10_urb_priv *urb_priv;
+
+ DBFENTER;
+
+ for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
+
+ /* Only check epids that are in use, is valid and has SB list */
+ if (!epid_inuse(epid) || epid == INVALID_EPID ||
+ TxIsocEPList[epid].sub == 0 || epid == DUMMY_EPID) {
+ /* Nothing here to see. */
+ continue;
+ }
+ ASSERT(epid_isoc(epid));
+
+ /* Get the active URB for this epid (if any). */
+ urb = activeUrbList[epid];
+ if (urb == 0) {
+ isoc_warn("Ignoring NULL urb for epid:%d\n", epid);
+ continue;
+ }
+ if(!epid_out_traffic(epid)) {
+ /* Sanity check. */
+ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
+
+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
+ ASSERT(urb_priv);
+
+ if (urb_priv->urb_state == NOT_STARTED) {
+ /* If ASAP is not set and urb->start_frame is the current frame,
+ start the transfer. */
+ if (!(urb->transfer_flags & URB_ISO_ASAP) &&
+ (urb->start_frame == (*R_USB_FM_NUMBER & 0x7ff))) {
+ /* EP should not be enabled if we're waiting for start_frame */
+ ASSERT((TxIsocEPList[epid].command &
+ IO_STATE(USB_EP_command, enable, yes)) == 0);
+
+ isoc_warn("Enabling isoc IN EP descr for epid %d\n", epid);
+ TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
+
+ /* This urb is now active. */
+ urb_priv->urb_state = STARTED;
+ continue;
+ }
+ }
+ }
+ }
+
+ DBFEXIT;
+}
+
+void crisv10_hcd_ctl_status_irq(struct crisv10_irq_reg *reg)
+{
+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(reg->hcd);
+
+ DBFENTER;
+ ASSERT(crisv10_hcd);
+
+ irq_dbg("ctr_status_irq, controller status: %s\n",
+ hcd_status_to_str(reg->r_usb_status));
+
+ /* FIXME: What should we do if we get ourun or perror? Dump the EP and SB
+ list for the corresponding epid? */
+ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) {
+ panic("USB controller got ourun.");
+ }
+ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) {
+
+ /* Before, etrax_usb_do_intr_recover was called on this epid if it was
+ an interrupt pipe. I don't see how re-enabling all EP descriptors
+ will help if there was a programming error. */
+ panic("USB controller got perror.");
+ }
+
+ /* Keep track of USB Controller, if it's running or not */
+ if(reg->r_usb_status & IO_STATE(R_USB_STATUS, running, yes)) {
+ crisv10_hcd->running = 1;
+ } else {
+ crisv10_hcd->running = 0;
+ }
+
+ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, device_mode)) {
+ /* We should never operate in device mode. */
+ panic("USB controller in device mode.");
+ }
+
+ /* Set the flag to avoid getting "Unlink after no-IRQ? Controller is probably
+ using the wrong IRQ" from hcd_unlink_urb() in drivers/usb/core/hcd.c */
+ set_bit(HCD_FLAG_SAW_IRQ, &reg->hcd->flags);
+
+ DBFEXIT;
+}
+
+
+/******************************************************************/
+/* Host Controller interface functions */
+/******************************************************************/
+
+static inline void crisv10_ready_wait(void) {
+ volatile int timeout = 10000;
+ /* Check the busy bit of USB controller in Etrax */
+ while((*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)) &&
+ (timeout-- > 0));
+ if(timeout == 0) {
+ warn("Timeout while waiting for USB controller to be idle\n");
+ }
+}
+
+/* reset host controller */
+static int crisv10_hcd_reset(struct usb_hcd *hcd)
+{
+ DBFENTER;
+ hcd_dbg(hcd, "reset\n");
+
+
+ /* Reset the USB interface. */
+ /*
+ *R_USB_COMMAND =
+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
+ IO_STATE(R_USB_COMMAND, ctrl_cmd, reset);
+ nop();
+ */
+ DBFEXIT;
+ return 0;
+}
+
+/* start host controller */
+static int crisv10_hcd_start(struct usb_hcd *hcd)
+{
+ DBFENTER;
+ hcd_dbg(hcd, "start\n");
+
+ crisv10_ready_wait();
+
+ /* Start processing of USB traffic. */
+ *R_USB_COMMAND =
+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
+
+ nop();
+
+ hcd->state = HC_STATE_RUNNING;
+
+ DBFEXIT;
+ return 0;
+}
+
+/* stop host controller */
+static void crisv10_hcd_stop(struct usb_hcd *hcd)
+{
+ DBFENTER;
+ hcd_dbg(hcd, "stop\n");
+ crisv10_hcd_reset(hcd);
+ DBFEXIT;
+}
+
+/* return the current frame number */
+static int crisv10_hcd_get_frame(struct usb_hcd *hcd)
+{
+ DBFENTER;
+ DBFEXIT;
+ return (*R_USB_FM_NUMBER & 0x7ff);
+}
+
+#ifdef CONFIG_USB_OTG
+
+static int crisv10_hcd_start_port_reset(struct usb_hcd *hcd, unsigned port)
+{
+ return 0; /* no-op for now */
+}
+
+#endif /* CONFIG_USB_OTG */
+
+
+/******************************************************************/
+/* Root Hub functions */
+/******************************************************************/
+
+/* root hub status */
+static const struct usb_hub_status rh_hub_status =
+ {
+ .wHubStatus = 0,
+ .wHubChange = 0,
+ };
+
+/* root hub descriptor */
+static const u8 rh_hub_descr[] =
+ {
+ 0x09, /* bDescLength */
+ 0x29, /* bDescriptorType */
+ USB_ROOT_HUB_PORTS, /* bNbrPorts */
+ 0x00, /* wHubCharacteristics */
+ 0x00,
+ 0x01, /* bPwrOn2pwrGood */
+ 0x00, /* bHubContrCurrent */
+ 0x00, /* DeviceRemovable */
+ 0xff /* PortPwrCtrlMask */
+ };
+
+/* Actual holder of root hub status*/
+struct crisv10_rh rh;
+
+/* Initialize root hub data structures (called from dvdrv_hcd_probe()) */
+int rh_init(void) {
+ int i;
+ /* Reset port status flags */
+ for (i = 0; i < USB_ROOT_HUB_PORTS; i++) {
+ rh.wPortChange[i] = 0;
+ rh.wPortStatusPrev[i] = 0;
+ }
+ return 0;
+}
+
+#define RH_FEAT_MASK ((1<<USB_PORT_FEAT_CONNECTION)|\
+ (1<<USB_PORT_FEAT_ENABLE)|\
+ (1<<USB_PORT_FEAT_SUSPEND)|\
+ (1<<USB_PORT_FEAT_RESET))
+
+/* Handle port status change interrupt (called from bottom part interrupt) */
+void rh_port_status_change(__u16 port_reg[]) {
+ int i;
+ __u16 wChange;
+
+ for(i = 0; i < USB_ROOT_HUB_PORTS; i++) {
+ /* Xor out changes since last read, masked for important flags */
+ wChange = (port_reg[i] & RH_FEAT_MASK) ^ rh.wPortStatusPrev[i];
+ /* Or changes together with (if any) saved changes */
+ rh.wPortChange[i] |= wChange;
+ /* Save new status */
+ rh.wPortStatusPrev[i] = port_reg[i];
+
+ if(wChange) {
+ rh_dbg("Interrupt port_status change port%d: %s Current-status:%s\n", i+1,
+ port_status_to_str(wChange),
+ port_status_to_str(port_reg[i]));
+ }
+ }
+}
+
+/* Construct port status change bitmap for the root hub */
+static int rh_status_data_request(struct usb_hcd *hcd, char *buf)
+{
+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd);
+ unsigned int i;
+
+ DBFENTER;
+ /*
+ * corresponds to hub status change EP (USB 2.0 spec section 11.13.4)
+ * return bitmap indicating ports with status change
+ */
+ *buf = 0;
+ spin_lock(&crisv10_hcd->lock);
+ for (i = 1; i <= crisv10_hcd->num_ports; i++) {
+ if (rh.wPortChange[map_port(i)]) {
+ *buf |= (1 << i);
+ rh_dbg("rh_status_data_request, change on port %d: %s Current Status: %s\n", i,
+ port_status_to_str(rh.wPortChange[map_port(i)]),
+ port_status_to_str(rh.wPortStatusPrev[map_port(i)]));
+ }
+ }
+ spin_unlock(&crisv10_hcd->lock);
+ DBFEXIT;
+ return *buf == 0 ? 0 : 1;
+}
+
+/* Handle a control request for the root hub (called from hcd_driver) */
+static int rh_control_request(struct usb_hcd *hcd,
+ u16 typeReq,
+ u16 wValue,
+ u16 wIndex,
+ char *buf,
+ u16 wLength) {
+
+ struct crisv10_hcd *crisv10_hcd = hcd_to_crisv10_hcd(hcd);
+ int retval = 0;
+ int len;
+ DBFENTER;
+
+ switch (typeReq) {
+ case GetHubDescriptor:
+ rh_dbg("GetHubDescriptor\n");
+ len = min_t(unsigned int, sizeof rh_hub_descr, wLength);
+ memcpy(buf, rh_hub_descr, len);
+ buf[2] = crisv10_hcd->num_ports;
+ break;
+ case GetHubStatus:
+ rh_dbg("GetHubStatus\n");
+ len = min_t(unsigned int, sizeof rh_hub_status, wLength);
+ memcpy(buf, &rh_hub_status, len);
+ break;
+ case GetPortStatus:
+ if (!wIndex || wIndex > crisv10_hcd->num_ports)
+ goto error;
+ rh_dbg("GetportStatus, port:%d change:%s status:%s\n", wIndex,
+ port_status_to_str(rh.wPortChange[map_port(wIndex)]),
+ port_status_to_str(rh.wPortStatusPrev[map_port(wIndex)]));
+ *(u16 *) buf = cpu_to_le16(rh.wPortStatusPrev[map_port(wIndex)]);
+ *(u16 *) (buf + 2) = cpu_to_le16(rh.wPortChange[map_port(wIndex)]);
+ break;
+ case SetHubFeature:
+ rh_dbg("SetHubFeature\n");
+ case ClearHubFeature:
+ rh_dbg("ClearHubFeature\n");
+ switch (wValue) {
+ case C_HUB_OVER_CURRENT:
+ case C_HUB_LOCAL_POWER:
+ rh_warn("Not implemented hub request:%d \n", typeReq);
+ /* not implemented */
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case SetPortFeature:
+ if (!wIndex || wIndex > crisv10_hcd->num_ports)
+ goto error;
+ if(rh_set_port_feature(map_port(wIndex), wValue))
+ goto error;
+ break;
+ case ClearPortFeature:
+ if (!wIndex || wIndex > crisv10_hcd->num_ports)
+ goto error;
+ if(rh_clear_port_feature(map_port(wIndex), wValue))
+ goto error;
+ break;
+ default:
+ rh_warn("Unknown hub request: %d\n", typeReq);
+ error:
+ retval = -EPIPE;
+ }
+ DBFEXIT;
+ return retval;
+}
+
+int rh_set_port_feature(__u8 bPort, __u16 wFeature) {
+ __u8 bUsbCommand = 0;
+ switch(wFeature) {
+ case USB_PORT_FEAT_RESET:
+ rh_dbg("SetPortFeature: reset\n");
+ bUsbCommand |= IO_STATE(R_USB_COMMAND, port_cmd, reset);
+ goto set;
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ rh_dbg("SetPortFeature: suspend\n");
+ bUsbCommand |= IO_STATE(R_USB_COMMAND, port_cmd, suspend);
+ goto set;
+ break;
+ case USB_PORT_FEAT_POWER:
+ rh_dbg("SetPortFeature: power\n");
+ break;
+ case USB_PORT_FEAT_C_CONNECTION:
+ rh_dbg("SetPortFeature: c_connection\n");
+ break;
+ case USB_PORT_FEAT_C_RESET:
+ rh_dbg("SetPortFeature: c_reset\n");
+ break;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ rh_dbg("SetPortFeature: c_over_current\n");
+ break;
+
+ set:
+ /* Select which port via the port_sel field */
+ bUsbCommand |= IO_FIELD(R_USB_COMMAND, port_sel, bPort+1);
+
+ /* Make sure the controller isn't busy. */
+ crisv10_ready_wait();
+ /* Send out the actual command to the USB controller */
+ *R_USB_COMMAND = bUsbCommand;
+
+ /* If port reset then also bring USB controller into running state */
+ if(wFeature == USB_PORT_FEAT_RESET) {
+ /* Wait a while for controller to first become started after port reset */
+ udelay(12000); /* 12ms blocking wait */
+
+ /* Make sure the controller isn't busy. */
+ crisv10_ready_wait();
+
+ /* If all enabled ports were disabled the host controller goes down into
+ started mode, so we need to bring it back into the running state.
+ (This is safe even if it's already in the running state.) */
+ *R_USB_COMMAND =
+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
+ }
+
+ break;
+ default:
+ rh_dbg("SetPortFeature: unknown feature\n");
+ return -1;
+ }
+ return 0;
+}
+
+int rh_clear_port_feature(__u8 bPort, __u16 wFeature) {
+ switch(wFeature) {
+ case USB_PORT_FEAT_ENABLE:
+ rh_dbg("ClearPortFeature: enable\n");
+ rh_disable_port(bPort);
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ rh_dbg("ClearPortFeature: suspend\n");
+ break;
+ case USB_PORT_FEAT_POWER:
+ rh_dbg("ClearPortFeature: power\n");
+ break;
+
+ case USB_PORT_FEAT_C_ENABLE:
+ rh_dbg("ClearPortFeature: c_enable\n");
+ goto clear;
+ case USB_PORT_FEAT_C_SUSPEND:
+ rh_dbg("ClearPortFeature: c_suspend\n");
+ goto clear;
+ case USB_PORT_FEAT_C_CONNECTION:
+ rh_dbg("ClearPortFeature: c_connection\n");
+ goto clear;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ rh_dbg("ClearPortFeature: c_over_current\n");
+ goto clear;
+ case USB_PORT_FEAT_C_RESET:
+ rh_dbg("ClearPortFeature: c_reset\n");
+ goto clear;
+ clear:
+ rh.wPortChange[bPort] &= ~(1 << (wFeature - 16));
+ break;
+ default:
+ rh_dbg("ClearPortFeature: unknown feature\n");
+ return -1;
+ }
+ return 0;
+}
+
+
+#ifdef CONFIG_PM
+/* Handle a suspend request for the root hub (called from hcd_driver) */
+static int rh_suspend_request(struct usb_hcd *hcd)
+{
+ return 0; /* no-op for now */
+}
+
+/* Handle a resume request for the root hub (called from hcd_driver) */
+static int rh_resume_request(struct usb_hcd *hcd)
+{
+ return 0; /* no-op for now */
+}
+#endif /* CONFIG_PM */
+
+
+
+/* Wrapper function for workaround port disable registers in USB controller */
+static void rh_disable_port(unsigned int port) {
+ volatile int timeout = 10000;
+ volatile char* usb_portx_disable;
+ switch(port) {
+ case 0:
+ usb_portx_disable = R_USB_PORT1_DISABLE;
+ break;
+ case 1:
+ usb_portx_disable = R_USB_PORT2_DISABLE;
+ break;
+ default:
+ /* Invalid port index */
+ return;
+ }
+ /* Set disable flag in special register */
+ *usb_portx_disable = IO_STATE(R_USB_PORT1_DISABLE, disable, yes);
+ /* Wait until not enabled anymore */
+ while((rh.wPortStatusPrev[port] &
+ IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) &&
+ (timeout-- > 0));
+ if(timeout == 0) {
+ warn("Timeout while waiting for port %d to become disabled\n", port);
+ }
+ /* clear disable flag in special register */
+ *usb_portx_disable = IO_STATE(R_USB_PORT1_DISABLE, disable, no);
+ rh_info("Physical port %d disabled\n", port+1);
+}
+
+
+/******************************************************************/
+/* Transfer Controller (TC) functions */
+/******************************************************************/
+
+/* FIXME: Should RX_BUF_SIZE be a config option, or maybe we should adjust it
+ dynamically?
+ To adjust it dynamically we would have to get an interrupt when we reach
+ the end of the rx descriptor list, or when we get close to the end, and
+ then allocate more descriptors. */
+#define NBR_OF_RX_DESC 512
+#define RX_DESC_BUF_SIZE 1024
+#define RX_BUF_SIZE (NBR_OF_RX_DESC * RX_DESC_BUF_SIZE)
- myNextRxDesc = &RxDescList[0];
- myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1];
- myPrevRxDesc = &RxDescList[NBR_OF_RX_DESC - 1];
- *R_DMA_CH9_FIRST = virt_to_phys(myNextRxDesc);
- *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, start);
+/* Local variables for Transfer Controller */
+/* --------------------------------------- */
- DBFEXIT;
-}
+/* This is a circular (double-linked) list of the active urbs for each epid.
+ The head is never removed, and new urbs are linked onto the list as
+ urb_entry_t elements. Don't reference urb_list directly; use the wrapper
+ functions instead (which includes spin_locks) */
+static struct list_head urb_list[NBR_OF_EPIDS];
-static void init_tx_bulk_ep(void)
-{
- int i;
+/* Read about the need and usage of this lock in submit_ctrl_urb. */
+/* Lock for URB lists for each EPID */
+static spinlock_t urb_list_lock;
- DBFENTER;
+/* Lock for EPID array register (R_USB_EPT_x) in Etrax */
+static spinlock_t etrax_epid_lock;
- for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
- CHECK_ALIGN(&TxBulkEPList[i]);
- TxBulkEPList[i].hw_len = 0;
- TxBulkEPList[i].command = IO_FIELD(USB_EP_command, epid, i);
- TxBulkEPList[i].sub = 0;
- TxBulkEPList[i].next = virt_to_phys(&TxBulkEPList[i + 1]);
-
- /* Initiate two EPs, disabled and with the eol flag set. No need for any
- preserved epid. */
-
- /* The first one has the intr flag set so we get an interrupt when the DMA
- channel is about to become disabled. */
- CHECK_ALIGN(&TxBulkDummyEPList[i][0]);
- TxBulkDummyEPList[i][0].hw_len = 0;
- TxBulkDummyEPList[i][0].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) |
- IO_STATE(USB_EP_command, eol, yes) |
- IO_STATE(USB_EP_command, intr, yes));
- TxBulkDummyEPList[i][0].sub = 0;
- TxBulkDummyEPList[i][0].next = virt_to_phys(&TxBulkDummyEPList[i][1]);
-
- /* The second one. */
- CHECK_ALIGN(&TxBulkDummyEPList[i][1]);
- TxBulkDummyEPList[i][1].hw_len = 0;
- TxBulkDummyEPList[i][1].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) |
- IO_STATE(USB_EP_command, eol, yes));
- TxBulkDummyEPList[i][1].sub = 0;
- /* The last dummy's next pointer is the same as the current EP's next pointer. */
- TxBulkDummyEPList[i][1].next = virt_to_phys(&TxBulkEPList[i + 1]);
- }
+/* Lock for dma8 sub0 handling */
+static spinlock_t etrax_dma8_sub0_lock;
- /* Configure the last one. */
- CHECK_ALIGN(&TxBulkEPList[i]);
- TxBulkEPList[i].hw_len = 0;
- TxBulkEPList[i].command = (IO_STATE(USB_EP_command, eol, yes) |
- IO_FIELD(USB_EP_command, epid, i));
- TxBulkEPList[i].sub = 0;
- TxBulkEPList[i].next = virt_to_phys(&TxBulkEPList[0]);
-
- /* No need configuring dummy EPs for the last one as it will never be used for
- bulk traffic (i == INVALD_EPID at this point). */
-
- /* Set up to start on the last EP so we will enable it when inserting traffic
- for the first time (imitating the situation where the DMA has stopped
- because there was no more traffic). */
- *R_DMA_CH8_SUB0_EP = virt_to_phys(&TxBulkEPList[i]);
- /* No point in starting the bulk channel yet.
- *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */
- DBFEXIT;
-}
+/* DMA IN cache bug. Align the DMA IN buffers to 32 bytes, i.e. a cache line.
+ Since RX_DESC_BUF_SIZE is 1024 is a multiple of 32, all rx buffers will be
+ cache aligned. */
+static volatile unsigned char RxBuf[RX_BUF_SIZE] __attribute__ ((aligned (32)));
+static volatile struct USB_IN_Desc RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned (4)));
-static void init_tx_ctrl_ep(void)
-{
- int i;
+/* Pointers into RxDescList. */
+static volatile struct USB_IN_Desc *myNextRxDesc;
+static volatile struct USB_IN_Desc *myLastRxDesc;
- DBFENTER;
+/* A zout transfer makes a memory access at the address of its buf pointer,
+ which means that setting this buf pointer to 0 will cause an access to the
+ flash. In addition to this, setting sw_len to 0 results in a 16/32 bytes
+ (depending on DMA burst size) transfer.
+ Instead, we set it to 1, and point it to this buffer. */
+static int zout_buffer[4] __attribute__ ((aligned (4)));
- for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
- CHECK_ALIGN(&TxCtrlEPList[i]);
- TxCtrlEPList[i].hw_len = 0;
- TxCtrlEPList[i].command = IO_FIELD(USB_EP_command, epid, i);
- TxCtrlEPList[i].sub = 0;
- TxCtrlEPList[i].next = virt_to_phys(&TxCtrlEPList[i + 1]);
- }
+/* Cache for allocating new EP and SB descriptors. */
+static kmem_cache_t *usb_desc_cache;
- CHECK_ALIGN(&TxCtrlEPList[i]);
- TxCtrlEPList[i].hw_len = 0;
- TxCtrlEPList[i].command = (IO_STATE(USB_EP_command, eol, yes) |
- IO_FIELD(USB_EP_command, epid, i));
+/* Cache for the data allocated in the isoc descr top half. */
+static kmem_cache_t *isoc_compl_cache;
- TxCtrlEPList[i].sub = 0;
- TxCtrlEPList[i].next = virt_to_phys(&TxCtrlEPList[0]);
+/* Cache for the data allocated when delayed finishing of URBs */
+static kmem_cache_t *later_data_cache;
- *R_DMA_CH8_SUB1_EP = virt_to_phys(&TxCtrlEPList[0]);
- *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start);
- DBFEXIT;
+/* Counter to keep track of how many Isoc EP we have sat up. Used to enable
+ and disable iso_eof interrupt. We only need these interrupts when we have
+ Isoc data endpoints (consumes CPU cycles).
+ FIXME: This could be more fine granular, so this interrupt is only enabled
+ when we have a In Isoc URB not URB_ISO_ASAP flaged queued. */
+static int isoc_epid_counter;
+
+/* Protecting wrapper functions for R_USB_EPT_x */
+/* -------------------------------------------- */
+static inline void etrax_epid_set(__u8 index, __u32 data) {
+ unsigned long flags;
+ spin_lock_irqsave(&etrax_epid_lock, flags);
+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
+ nop();
+ *R_USB_EPT_DATA = data;
+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
+}
+
+static inline void etrax_epid_clear_error(__u8 index) {
+ unsigned long flags;
+ spin_lock_irqsave(&etrax_epid_lock, flags);
+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
+ nop();
+ *R_USB_EPT_DATA &=
+ ~(IO_MASK(R_USB_EPT_DATA, error_count_in) |
+ IO_MASK(R_USB_EPT_DATA, error_count_out) |
+ IO_MASK(R_USB_EPT_DATA, error_code));
+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
+}
+
+static inline void etrax_epid_set_toggle(__u8 index, __u8 dirout,
+ __u8 toggle) {
+ unsigned long flags;
+ spin_lock_irqsave(&etrax_epid_lock, flags);
+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
+ nop();
+ if(dirout) {
+ *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_out);
+ *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_out, toggle);
+ } else {
+ *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_in);
+ *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_in, toggle);
+ }
+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
+}
+
+static inline __u8 etrax_epid_get_toggle(__u8 index, __u8 dirout) {
+ unsigned long flags;
+ __u8 toggle;
+ spin_lock_irqsave(&etrax_epid_lock, flags);
+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
+ nop();
+ if (dirout) {
+ toggle = IO_EXTRACT(R_USB_EPT_DATA, t_out, *R_USB_EPT_DATA);
+ } else {
+ toggle = IO_EXTRACT(R_USB_EPT_DATA, t_in, *R_USB_EPT_DATA);
+ }
+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
+ return toggle;
+}
+
+
+static inline __u32 etrax_epid_get(__u8 index) {
+ unsigned long flags;
+ __u32 data;
+ spin_lock_irqsave(&etrax_epid_lock, flags);
+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
+ nop();
+ data = *R_USB_EPT_DATA;
+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
+ return data;
+}
+
+
+
+
+/* Main functions for Transfer Controller */
+/* -------------------------------------- */
+
+/* Init structs, memories and lists used by Transfer Controller */
+int tc_init(struct usb_hcd *hcd) {
+ int i;
+ /* Clear software state info for all epids */
+ memset(epid_state, 0, sizeof(struct etrax_epid) * NBR_OF_EPIDS);
+
+ /* Set Invalid and Dummy as being in use and disabled */
+ epid_state[INVALID_EPID].inuse = 1;
+ epid_state[DUMMY_EPID].inuse = 1;
+ epid_state[INVALID_EPID].disabled = 1;
+ epid_state[DUMMY_EPID].disabled = 1;
+
+ /* Clear counter for how many Isoc epids we have sat up */
+ isoc_epid_counter = 0;
+
+ /* Initialize the urb list by initiating a head for each list.
+ Also reset list hodling active URB for each epid */
+ for (i = 0; i < NBR_OF_EPIDS; i++) {
+ INIT_LIST_HEAD(&urb_list[i]);
+ activeUrbList[i] = NULL;
+ }
+
+ /* Init lock for URB lists */
+ spin_lock_init(&urb_list_lock);
+ /* Init lock for Etrax R_USB_EPT register */
+ spin_lock_init(&etrax_epid_lock);
+ /* Init lock for Etrax dma8 sub0 handling */
+ spin_lock_init(&etrax_dma8_sub0_lock);
+
+ /* We use kmem_cache_* to make sure that all DMA desc. are dword aligned */
+
+ /* Note that we specify sizeof(struct USB_EP_Desc) as the size, but also
+ allocate SB descriptors from this cache. This is ok since
+ sizeof(struct USB_EP_Desc) == sizeof(struct USB_SB_Desc). */
+ usb_desc_cache = kmem_cache_create("usb_desc_cache",
+ sizeof(struct USB_EP_Desc), 0,
+ SLAB_HWCACHE_ALIGN, 0, 0);
+ if(usb_desc_cache == NULL) {
+ return -ENOMEM;
+ }
+
+ /* Create slab cache for speedy allocation of memory for isoc bottom-half
+ interrupt handling */
+ isoc_compl_cache =
+ kmem_cache_create("isoc_compl_cache",
+ sizeof(struct crisv10_isoc_complete_data),
+ 0, SLAB_HWCACHE_ALIGN, 0, 0);
+ if(isoc_compl_cache == NULL) {
+ return -ENOMEM;
+ }
+
+ /* Create slab cache for speedy allocation of memory for later URB finish
+ struct */
+ later_data_cache =
+ kmem_cache_create("later_data_cache",
+ sizeof(struct urb_later_data),
+ 0, SLAB_HWCACHE_ALIGN, 0, 0);
+ if(later_data_cache == NULL) {
+ return -ENOMEM;
+ }
+
+
+ /* Initiate the bulk start timer. */
+ init_timer(&bulk_start_timer);
+ bulk_start_timer.expires = jiffies + BULK_START_TIMER_INTERVAL;
+ bulk_start_timer.function = tc_bulk_start_timer_func;
+ add_timer(&bulk_start_timer);
+
+
+ /* Initiate the bulk eot timer. */
+ init_timer(&bulk_eot_timer);
+ bulk_eot_timer.expires = jiffies + BULK_EOT_TIMER_INTERVAL;
+ bulk_eot_timer.function = tc_bulk_eot_timer_func;
+ bulk_eot_timer.data = (unsigned long)hcd;
+ add_timer(&bulk_eot_timer);
+
+ return 0;
+}
+
+/* Uninitialize all resources used by Transfer Controller */
+void tc_destroy(void) {
+
+ /* Destroy all slab cache */
+ kmem_cache_destroy(usb_desc_cache);
+ kmem_cache_destroy(isoc_compl_cache);
+ kmem_cache_destroy(later_data_cache);
+
+ /* Remove timers */
+ del_timer(&bulk_start_timer);
+ del_timer(&bulk_eot_timer);
+}
+
+static void restart_dma8_sub0(void) {
+ unsigned long flags;
+ spin_lock_irqsave(&etrax_dma8_sub0_lock, flags);
+ /* Verify that the dma is not running */
+ if ((*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd)) == 0) {
+ struct USB_EP_Desc *ep = (struct USB_EP_Desc *)phys_to_virt(*R_DMA_CH8_SUB0_EP);
+ while (DUMMY_EPID == IO_EXTRACT(USB_EP_command, epid, ep->command)) {
+ ep = (struct USB_EP_Desc *)phys_to_virt(ep->next);
+ }
+ /* Advance the DMA to the next EP descriptor that is not a DUMMY_EPID.
+ * ep->next is already a physical address; no need for a virt_to_phys. */
+ *R_DMA_CH8_SUB0_EP = ep->next;
+ /* Restart the DMA */
+ *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start);
+ }
+ spin_unlock_irqrestore(&etrax_dma8_sub0_lock, flags);
+}
+
+/* queue an URB with the transfer controller (called from hcd_driver) */
+static int tc_urb_enqueue(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep,
+ struct urb *urb,
+ gfp_t mem_flags) {
+ int epid;
+ int retval;
+ int bustime = 0;
+ int maxpacket;
+ unsigned long flags;
+ struct crisv10_urb_priv *urb_priv;
+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd);
+ DBFENTER;
+
+ if(!(crisv10_hcd->running)) {
+ /* The USB Controller is not running, probably because no device is
+ attached. No idea to enqueue URBs then */
+ tc_warn("Rejected enqueueing of URB:0x%x because no dev attached\n",
+ (unsigned int)urb);
+ return -ENOENT;
+ }
+
+ maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
+ /* Special case check for In Isoc transfers. Specification states that each
+ In Isoc transfer consists of one packet and therefore it should fit into
+ the transfer-buffer of an URB.
+ We do the check here to be sure (an invalid scenario can be produced with
+ parameters to the usbtest suite) */
+ if(usb_pipeisoc(urb->pipe) && usb_pipein(urb->pipe) &&
+ (urb->transfer_buffer_length < maxpacket)) {
+ tc_err("Submit In Isoc URB with buffer length:%d to pipe with maxpacketlen: %d\n", urb->transfer_buffer_length, maxpacket);
+ return -EMSGSIZE;
+ }
+
+ /* Check if there is enough bandwidth for periodic transfer */
+ if(usb_pipeint(urb->pipe) || usb_pipeisoc(urb->pipe)) {
+ /* only check (and later claim) if not already claimed */
+ if (urb->bandwidth == 0) {
+ bustime = usb_check_bandwidth(urb->dev, urb);
+ if (bustime < 0) {
+ tc_err("Not enough periodic bandwidth\n");
+ return -ENOSPC;
+ }
+ }
+ }
+
+ /* Check if there is a epid for URBs destination, if not this function
+ set up one. */
+ epid = tc_setup_epid(ep, urb, mem_flags);
+ if (epid < 0) {
+ tc_err("Failed setup epid:%d for URB:0x%x\n", epid, (unsigned int)urb);
+ DBFEXIT;
+ return -ENOMEM;
+ }
+
+ if(urb == activeUrbList[epid]) {
+ tc_err("Resubmition of allready active URB:0x%x\n", (unsigned int)urb);
+ return -ENXIO;
+ }
+
+ if(urb_list_entry(urb, epid)) {
+ tc_err("Resubmition of allready queued URB:0x%x\n", (unsigned int)urb);
+ return -ENXIO;
+ }
+
+ /* If we actively have flaged endpoint as disabled then refuse submition */
+ if(epid_state[epid].disabled) {
+ return -ENOENT;
+ }
+
+ /* Allocate and init HC-private data for URB */
+ if(urb_priv_create(hcd, urb, epid, mem_flags) != 0) {
+ DBFEXIT;
+ return -ENOMEM;
+ }
+ urb_priv = urb->hcpriv;
+
+ tc_dbg("Enqueue URB:0x%x[%d] epid:%d (%s) bufflen:%d\n",
+ (unsigned int)urb, urb_priv->urb_num, epid,
+ pipe_to_str(urb->pipe), urb->transfer_buffer_length);
+
+ /* Create and link SBs required for this URB */
+ retval = create_sb_for_urb(urb, mem_flags);
+ if(retval != 0) {
+ tc_err("Failed to create SBs for URB:0x%x[%d]\n", (unsigned int)urb,
+ urb_priv->urb_num);
+ urb_priv_free(hcd, urb);
+ DBFEXIT;
+ return retval;
+ }
+
+ /* Init intr EP pool if this URB is a INTR transfer. This pool is later
+ used when inserting EPs in the TxIntrEPList. We do the alloc here
+ so we can't run out of memory later */
+ if(usb_pipeint(urb->pipe)) {
+ retval = init_intr_urb(urb, mem_flags);
+ if(retval != 0) {
+ tc_warn("Failed to init Intr URB\n");
+ urb_priv_free(hcd, urb);
+ DBFEXIT;
+ return retval;
+ }
+ }
+
+ /* Disable other access when inserting USB */
+ local_irq_save(flags);
+
+ /* Claim bandwidth, if needed */
+ if(bustime) {
+ usb_claim_bandwidth(urb->dev, urb, bustime, 0);
+ }
+
+ /* Add URB to EP queue */
+ urb_list_add(urb, epid, mem_flags);
+
+ if(usb_pipeisoc(urb->pipe)) {
+ /* Special processing of Isoc URBs. */
+ tc_dma_process_isoc_urb(urb);
+ } else {
+ /* Process EP queue for rest of the URB types (Bulk, Ctrl, Intr) */
+ tc_dma_process_queue(epid);
+ }
+
+ local_irq_restore(flags);
+
+ DBFEXIT;
+ return 0;
+}
+
+/* remove an URB from the transfer controller queues (called from hcd_driver)*/
+static int tc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) {
+ struct crisv10_urb_priv *urb_priv;
+ unsigned long flags;
+ int epid;
+
+ DBFENTER;
+ /* Disable interrupts here since a descriptor interrupt for the isoc epid
+ will modify the sb list. This could possibly be done more granular, but
+ urb_dequeue should not be used frequently anyway.
+ */
+ local_irq_save(flags);
+
+ urb_priv = urb->hcpriv;
+
+ if (!urb_priv) {
+ /* This happens if a device driver calls unlink on an urb that
+ was never submitted (lazy driver) or if the urb was completed
+ while dequeue was being called. */
+ tc_warn("Dequeing of not enqueued URB:0x%x\n", (unsigned int)urb);
+ local_irq_restore(flags);
+ return 0;
+ }
+ epid = urb_priv->epid;
+
+ tc_warn("Dequeing %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n",
+ (urb == activeUrbList[epid]) ? "active" : "queued",
+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
+ str_type(urb->pipe), epid, urb->status,
+ (urb_priv->later_data) ? "later-sched" : "");
+
+ /* For Bulk, Ctrl and Intr are only one URB active at a time. So any URB
+ that isn't active can be dequeued by just removing it from the queue */
+ if(usb_pipebulk(urb->pipe) || usb_pipecontrol(urb->pipe) ||
+ usb_pipeint(urb->pipe)) {
+
+ /* Check if URB haven't gone further than the queue */
+ if(urb != activeUrbList[epid]) {
+ ASSERT(urb_priv->later_data == NULL);
+ tc_warn("Dequeing URB:0x%x[%d] (%s %s epid:%d) from queue"
+ " (not active)\n", (unsigned int)urb, urb_priv->urb_num,
+ str_dir(urb->pipe), str_type(urb->pipe), epid);
+
+ /* Finish the URB with error status from USB core */
+ tc_finish_urb(hcd, urb, urb->status);
+ local_irq_restore(flags);
+ return 0;
+ }
+ }
+
+ /* Set URB status to Unlink for handling when interrupt comes. */
+ urb_priv->urb_state = UNLINK;
+
+ /* Differentiate dequeing of Bulk and Ctrl from Isoc and Intr */
+ switch(usb_pipetype(urb->pipe)) {
+ case PIPE_BULK:
+ /* Check if EP still is enabled */
+ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
+ /* The EP was enabled, disable it. */
+ TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
+ }
+ /* Kicking dummy list out of the party. */
+ TxBulkEPList[epid].next = virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]);
+ break;
+ case PIPE_CONTROL:
+ /* Check if EP still is enabled */
+ if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
+ /* The EP was enabled, disable it. */
+ TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
+ }
+ break;
+ case PIPE_ISOCHRONOUS:
+ /* Disabling, busy-wait and unlinking of Isoc SBs will be done in
+ finish_isoc_urb(). Because there might the case when URB is dequeued
+ but there are other valid URBs waiting */
+
+ /* Check if In Isoc EP still is enabled */
+ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
+ /* The EP was enabled, disable it. */
+ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
+ }
+ break;
+ case PIPE_INTERRUPT:
+ /* Special care is taken for interrupt URBs. EPs are unlinked in
+ tc_finish_urb */
+ break;
+ default:
+ break;
+ }
+
+ /* Asynchronous unlink, finish the URB later from scheduled or other
+ event (data finished, error) */
+ tc_finish_urb_later(hcd, urb, urb->status);
+
+ local_irq_restore(flags);
+ DBFEXIT;
+ return 0;
+}
+
+
+static void tc_sync_finish_epid(struct usb_hcd *hcd, int epid) {
+ volatile int timeout = 10000;
+ struct urb* urb;
+ struct crisv10_urb_priv* urb_priv;
+ unsigned long flags;
+
+ volatile struct USB_EP_Desc *first_ep; /* First EP in the list. */
+ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */
+ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */
+
+ int type = epid_state[epid].type;
+
+ /* Setting this flag will cause enqueue() to return -ENOENT for new
+ submitions on this endpoint and finish_urb() wont process queue further */
+ epid_state[epid].disabled = 1;
+
+ switch(type) {
+ case PIPE_BULK:
+ /* Check if EP still is enabled */
+ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
+ /* The EP was enabled, disable it. */
+ TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
+ tc_warn("sync_finish: Disabling EP for epid:%d\n", epid);
+
+ /* Do busy-wait until DMA not using this EP descriptor anymore */
+ while((*R_DMA_CH8_SUB0_EP ==
+ virt_to_phys(&TxBulkEPList[epid])) &&
+ (timeout-- > 0));
+ if(timeout == 0) {
+ warn("Timeout while waiting for DMA-TX-Bulk to leave EP for"
+ " epid:%d\n", epid);
+ }
+ }
+ break;
+
+ case PIPE_CONTROL:
+ /* Check if EP still is enabled */
+ if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
+ /* The EP was enabled, disable it. */
+ TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
+ tc_warn("sync_finish: Disabling EP for epid:%d\n", epid);
+
+ /* Do busy-wait until DMA not using this EP descriptor anymore */
+ while((*R_DMA_CH8_SUB1_EP ==
+ virt_to_phys(&TxCtrlEPList[epid])) &&
+ (timeout-- > 0));
+ if(timeout == 0) {
+ warn("Timeout while waiting for DMA-TX-Ctrl to leave EP for"
+ " epid:%d\n", epid);
+ }
+ }
+ break;
+
+ case PIPE_INTERRUPT:
+ local_irq_save(flags);
+ /* Disable all Intr EPs belonging to epid */
+ first_ep = &TxIntrEPList[0];
+ curr_ep = first_ep;
+ do {
+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next);
+ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) {
+ /* Disable EP */
+ next_ep->command &= ~IO_MASK(USB_EP_command, enable);
+ }
+ curr_ep = phys_to_virt(curr_ep->next);
+ } while (curr_ep != first_ep);
+
+ local_irq_restore(flags);
+ break;
+
+ case PIPE_ISOCHRONOUS:
+ /* Check if EP still is enabled */
+ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
+ tc_warn("sync_finish: Disabling Isoc EP for epid:%d\n", epid);
+ /* The EP was enabled, disable it. */
+ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
+
+ while((*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])) &&
+ (timeout-- > 0));
+ if(timeout == 0) {
+ warn("Timeout while waiting for DMA-TX-Isoc to leave EP for"
+ " epid:%d\n", epid);
+ }
+ }
+ break;
+ }
+
+ local_irq_save(flags);
+
+ /* Finish if there is active URB for this endpoint */
+ if(activeUrbList[epid] != NULL) {
+ urb = activeUrbList[epid];
+ urb_priv = urb->hcpriv;
+ ASSERT(urb_priv);
+ tc_warn("Sync finish %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n",
+ (urb == activeUrbList[epid]) ? "active" : "queued",
+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
+ str_type(urb->pipe), epid, urb->status,
+ (urb_priv->later_data) ? "later-sched" : "");
+
+ tc_finish_urb(hcd, activeUrbList[epid], -ENOENT);
+ ASSERT(activeUrbList[epid] == NULL);
+ }
+
+ /* Finish any queued URBs for this endpoint. There won't be any resubmitions
+ because epid_disabled causes enqueue() to fail for this endpoint */
+ while((urb = urb_list_first(epid)) != NULL) {
+ urb_priv = urb->hcpriv;
+ ASSERT(urb_priv);
+
+ tc_warn("Sync finish %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n",
+ (urb == activeUrbList[epid]) ? "active" : "queued",
+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
+ str_type(urb->pipe), epid, urb->status,
+ (urb_priv->later_data) ? "later-sched" : "");
+
+ tc_finish_urb(hcd, urb, -ENOENT);
+ }
+ epid_state[epid].disabled = 0;
+ local_irq_restore(flags);
+}
+
+/* free resources associated with an endpoint (called from hcd_driver) */
+static void tc_endpoint_disable(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep) {
+ DBFENTER;
+ /* Only free epid if it has been allocated. We get two endpoint_disable
+ requests for ctrl endpoints so ignore the second one */
+ if(ep->hcpriv != NULL) {
+ struct crisv10_ep_priv *ep_priv = ep->hcpriv;
+ int epid = ep_priv->epid;
+ tc_warn("endpoint_disable ep:0x%x ep-priv:0x%x (%s) (epid:%d freed)\n",
+ (unsigned int)ep, (unsigned int)ep->hcpriv,
+ endpoint_to_str(&(ep->desc)), epid);
+
+ tc_sync_finish_epid(hcd, epid);
+
+ ASSERT(activeUrbList[epid] == NULL);
+ ASSERT(list_empty(&urb_list[epid]));
+
+ tc_free_epid(ep);
+ } else {
+ tc_dbg("endpoint_disable ep:0x%x ep-priv:0x%x (%s)\n", (unsigned int)ep,
+ (unsigned int)ep->hcpriv, endpoint_to_str(&(ep->desc)));
+ }
+ DBFEXIT;
+}
+
+static void tc_finish_urb_later_proc(void *data) {
+ unsigned long flags;
+ struct urb_later_data* uld = (struct urb_later_data*)data;
+ local_irq_save(flags);
+ if(uld->urb == NULL) {
+ late_dbg("Later finish of URB = NULL (allready finished)\n");
+ } else {
+ struct crisv10_urb_priv* urb_priv = uld->urb->hcpriv;
+ ASSERT(urb_priv);
+ if(urb_priv->urb_num == uld->urb_num) {
+ late_dbg("Later finish of URB:0x%x[%d]\n", (unsigned int)(uld->urb),
+ urb_priv->urb_num);
+ if(uld->status != uld->urb->status) {
+ errno_dbg("Later-finish URB with status:%d, later-status:%d\n",
+ uld->urb->status, uld->status);
+ }
+ if(uld != urb_priv->later_data) {
+ panic("Scheduled uld not same as URBs uld\n");
+ }
+ tc_finish_urb(uld->hcd, uld->urb, uld->status);
+ } else {
+ late_warn("Ignoring later finish of URB:0x%x[%d]"
+ ", urb_num doesn't match current URB:0x%x[%d]",
+ (unsigned int)(uld->urb), uld->urb_num,
+ (unsigned int)(uld->urb), urb_priv->urb_num);
+ }
+ }
+ local_irq_restore(flags);
+ kmem_cache_free(later_data_cache, uld);
+}
+
+static void tc_finish_urb_later(struct usb_hcd *hcd, struct urb *urb,
+ int status) {
+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
+ struct urb_later_data* uld;
+
+ ASSERT(urb_priv);
+
+ if(urb_priv->later_data != NULL) {
+ /* Later-finish allready scheduled for this URB, just update status to
+ return when finishing later */
+ errno_dbg("Later-finish schedule change URB status:%d with new"
+ " status:%d\n", urb_priv->later_data->status, status);
+
+ urb_priv->later_data->status = status;
+ return;
+ }
+
+ uld = kmem_cache_alloc(later_data_cache, SLAB_ATOMIC);
+ ASSERT(uld);
+
+ uld->hcd = hcd;
+ uld->urb = urb;
+ uld->urb_num = urb_priv->urb_num;
+ uld->status = status;
+
+ INIT_WORK(&uld->ws, tc_finish_urb_later_proc, uld);
+ urb_priv->later_data = uld;
+
+ /* Schedule the finishing of the URB to happen later */
+ schedule_delayed_work(&uld->ws, LATER_TIMER_DELAY);
+}
+
+static void tc_finish_isoc_urb(struct usb_hcd *hcd, struct urb *urb,
+ int status);
+
+static void tc_finish_urb(struct usb_hcd *hcd, struct urb *urb, int status) {
+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd);
+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
+ int epid;
+ char toggle;
+ int urb_num;
+
+ DBFENTER;
+ ASSERT(urb_priv != NULL);
+ epid = urb_priv->epid;
+ urb_num = urb_priv->urb_num;
+
+ if(urb != activeUrbList[epid]) {
+ if(urb_list_entry(urb, epid)) {
+ /* Remove this URB from the list. Only happens when URB are finished
+ before having been processed (dequeing) */
+ urb_list_del(urb, epid);
+ } else {
+ tc_warn("Finishing of URB:0x%x[%d] neither active or in queue for"
+ " epid:%d\n", (unsigned int)urb, urb_num, epid);
+ }
+ }
+
+ /* Cancel any pending later-finish of this URB */
+ if(urb_priv->later_data) {
+ urb_priv->later_data->urb = NULL;
+ }
+
+ /* For an IN pipe, we always set the actual length, regardless of whether
+ there was an error or not (which means the device driver can use the data
+ if it wants to). */
+ if(usb_pipein(urb->pipe)) {
+ urb->actual_length = urb_priv->rx_offset;
+ } else {
+ /* Set actual_length for OUT urbs also; the USB mass storage driver seems
+ to want that. */
+ if (status == 0 && urb->status == -EINPROGRESS) {
+ urb->actual_length = urb->transfer_buffer_length;
+ } else {
+ /* We wouldn't know of any partial writes if there was an error. */
+ urb->actual_length = 0;
+ }
+ }
+
+
+ /* URB status mangling */
+ if(urb->status == -EINPROGRESS) {
+ /* The USB core hasn't changed the status, let's set our finish status */
+ urb->status = status;
+
+ if ((status == 0) && (urb->transfer_flags & URB_SHORT_NOT_OK) &&
+ usb_pipein(urb->pipe) &&
+ (urb->actual_length != urb->transfer_buffer_length)) {
+ /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's
+ max length) is to be treated as an error. */
+ errno_dbg("Finishing URB:0x%x[%d] with SHORT_NOT_OK flag and short"
+ " data:%d\n", (unsigned int)urb, urb_num,
+ urb->actual_length);
+ urb->status = -EREMOTEIO;
+ }
+
+ if(urb_priv->urb_state == UNLINK) {
+ /* URB has been requested to be unlinked asynchronously */
+ urb->status = -ECONNRESET;
+ errno_dbg("Fixing unlink status of URB:0x%x[%d] to:%d\n",
+ (unsigned int)urb, urb_num, urb->status);
+ }
+ } else {
+ /* The USB Core wants to signal some error via the URB, pass it through */
+ }
+
+ /* use completely different finish function for Isoc URBs */
+ if(usb_pipeisoc(urb->pipe)) {
+ tc_finish_isoc_urb(hcd, urb, status);
+ return;
+ }
+
+ /* Do special unlinking of EPs for Intr traffic */
+ if(usb_pipeint(urb->pipe)) {
+ tc_dma_unlink_intr_urb(urb);
+ }
+
+ /* Release allocated bandwidth for periodic transfers */
+ if(usb_pipeint(urb->pipe) || usb_pipeisoc(urb->pipe))
+ usb_release_bandwidth(urb->dev, urb, 0);
+
+ /* This URB is active on EP */
+ if(urb == activeUrbList[epid]) {
+ /* We need to fiddle with the toggle bits because the hardware doesn't do
+ it for us. */
+ toggle = etrax_epid_get_toggle(epid, usb_pipeout(urb->pipe));
+ usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+ usb_pipeout(urb->pipe), toggle);
+
+ /* Checks for Ctrl and Bulk EPs */
+ switch(usb_pipetype(urb->pipe)) {
+ case PIPE_BULK:
+ /* Check so Bulk EP realy is disabled before finishing active URB */
+ ASSERT((TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) ==
+ IO_STATE(USB_EP_command, enable, no));
+ /* Disable sub-pointer for EP to avoid next tx_interrupt() to
+ process Bulk EP. */
+ TxBulkEPList[epid].sub = 0;
+ /* No need to wait for the DMA before changing the next pointer.
+ The modulo NBR_OF_EPIDS isn't actually necessary, since we will never use
+ the last one (INVALID_EPID) for actual traffic. */
+ TxBulkEPList[epid].next =
+ virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]);
+ break;
+ case PIPE_CONTROL:
+ /* Check so Ctrl EP realy is disabled before finishing active URB */
+ ASSERT((TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) ==
+ IO_STATE(USB_EP_command, enable, no));
+ /* Disable sub-pointer for EP to avoid next tx_interrupt() to
+ process Ctrl EP. */
+ TxCtrlEPList[epid].sub = 0;
+ break;
+ }
+ }
+
+ /* Free HC-private URB data*/
+ urb_priv_free(hcd, urb);
+
+ if(urb->status) {
+ errno_dbg("finish_urb (URB:0x%x[%d] %s %s) (data:%d) status:%d\n",
+ (unsigned int)urb, urb_num, str_dir(urb->pipe),
+ str_type(urb->pipe), urb->actual_length, urb->status);
+ } else {
+ tc_dbg("finish_urb (URB:0x%x[%d] %s %s) (data:%d) status:%d\n",
+ (unsigned int)urb, urb_num, str_dir(urb->pipe),
+ str_type(urb->pipe), urb->actual_length, urb->status);
+ }
+
+ /* If we just finished an active URB, clear active pointer. */
+ if (urb == activeUrbList[epid]) {
+ /* Make URB not active on EP anymore */
+ activeUrbList[epid] = NULL;
+
+ if(urb->status == 0) {
+ /* URB finished sucessfully, process queue to see if there are any more
+ URBs waiting before we call completion function.*/
+ if(crisv10_hcd->running) {
+ /* Only process queue if USB controller is running */
+ tc_dma_process_queue(epid);
+ } else {
+ tc_warn("No processing of queue for epid:%d, USB Controller not"
+ " running\n", epid);
+ }
+ }
+ }
+
+ /* Hand the URB from HCD to its USB device driver, using its completion
+ functions */
+ usb_hcd_giveback_urb (hcd, urb);
+
+ /* Check the queue once more if the URB returned with error, because we
+ didn't do it before the completion function because the specification
+ states that the queue should not restart until all it's unlinked
+ URBs have been fully retired, with the completion functions run */
+ if(crisv10_hcd->running) {
+ /* Only process queue if USB controller is running */
+ tc_dma_process_queue(epid);
+ } else {
+ tc_warn("No processing of queue for epid:%d, USB Controller not running\n",
+ epid);
+ }
+
+ DBFEXIT;
+}
+
+static void tc_finish_isoc_urb(struct usb_hcd *hcd, struct urb *urb,
+ int status) {
+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
+ int epid, i;
+ volatile int timeout = 10000;
+
+ ASSERT(urb_priv);
+ epid = urb_priv->epid;
+
+ ASSERT(usb_pipeisoc(urb->pipe));
+
+ /* Set that all isoc packets have status and length set before
+ completing the urb. */
+ for (i = urb_priv->isoc_packet_counter; i < urb->number_of_packets; i++){
+ urb->iso_frame_desc[i].actual_length = 0;
+ urb->iso_frame_desc[i].status = -EPROTO;
+ }
+
+ /* Check if the URB is currently active (done or error) */
+ if(urb == activeUrbList[epid]) {
+ /* Check if there are another In Isoc URB queued for this epid */
+ if (!list_empty(&urb_list[epid])&& !epid_state[epid].disabled) {
+ /* Move it from queue to active and mark it started so Isoc transfers
+ won't be interrupted.
+ All Isoc URBs data transfers are already added to DMA lists so we
+ don't have to insert anything in DMA lists here. */
+ activeUrbList[epid] = urb_list_first(epid);
+ ((struct crisv10_urb_priv *)(activeUrbList[epid]->hcpriv))->urb_state =
+ STARTED;
+ urb_list_del(activeUrbList[epid], epid);
+
+ if(urb->status) {
+ errno_dbg("finish_isoc_urb (URB:0x%x[%d] %s %s) (%d of %d packets)"
+ " status:%d, new waiting URB:0x%x[%d]\n",
+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
+ str_type(urb->pipe), urb_priv->isoc_packet_counter,
+ urb->number_of_packets, urb->status,
+ (unsigned int)activeUrbList[epid],
+ ((struct crisv10_urb_priv *)(activeUrbList[epid]->hcpriv))->urb_num);
+ }
+
+ } else { /* No other URB queued for this epid */
+ if(urb->status) {
+ errno_dbg("finish_isoc_urb (URB:0x%x[%d] %s %s) (%d of %d packets)"
+ " status:%d, no new URB waiting\n",
+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
+ str_type(urb->pipe), urb_priv->isoc_packet_counter,
+ urb->number_of_packets, urb->status);
+ }
+
+ /* Check if EP is still enabled, then shut it down. */
+ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
+ isoc_dbg("Isoc EP enabled for epid:%d, disabling it\n", epid);
+
+ /* Should only occur for In Isoc EPs where SB isn't consumed. */
+ ASSERT(usb_pipein(urb->pipe));
+
+ /* Disable it and wait for it to stop */
+ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
+
+ /* Ah, the luxury of busy-wait. */
+ while((*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])) &&
+ (timeout-- > 0));
+ if(timeout == 0) {
+ warn("Timeout while waiting for DMA-TX-Isoc to leave EP for epid:%d\n", epid);
+ }
+ }
+
+ /* Unlink SB to say that epid is finished. */
+ TxIsocEPList[epid].sub = 0;
+ TxIsocEPList[epid].hw_len = 0;
+
+ /* No URB active for EP anymore */
+ activeUrbList[epid] = NULL;
+ }
+ } else { /* Finishing of not active URB (queued up with SBs thought) */
+ isoc_warn("finish_isoc_urb (URB:0x%x %s) (%d of %d packets) status:%d,"
+ " SB queued but not active\n",
+ (unsigned int)urb, str_dir(urb->pipe),
+ urb_priv->isoc_packet_counter, urb->number_of_packets,
+ urb->status);
+ if(usb_pipeout(urb->pipe)) {
+ /* Finishing of not yet active Out Isoc URB needs unlinking of SBs. */
+ struct USB_SB_Desc *iter_sb, *prev_sb, *next_sb;
+
+ iter_sb = TxIsocEPList[epid].sub ?
+ phys_to_virt(TxIsocEPList[epid].sub) : 0;
+ prev_sb = 0;
+
+ /* SB that is linked before this URBs first SB */
+ while (iter_sb && (iter_sb != urb_priv->first_sb)) {
+ prev_sb = iter_sb;
+ iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
+ }
+
+ if (iter_sb == 0) {
+ /* Unlink of the URB currently being transmitted. */
+ prev_sb = 0;
+ iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0;
+ }
+
+ while (iter_sb && (iter_sb != urb_priv->last_sb)) {
+ iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
+ }
+
+ if (iter_sb) {
+ next_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
+ } else {
+ /* This should only happen if the DMA has completed
+ processing the SB list for this EP while interrupts
+ are disabled. */
+ isoc_dbg("Isoc urb not found, already sent?\n");
+ next_sb = 0;
+ }
+ if (prev_sb) {
+ prev_sb->next = next_sb ? virt_to_phys(next_sb) : 0;
+ } else {
+ TxIsocEPList[epid].sub = next_sb ? virt_to_phys(next_sb) : 0;
+ }
+ }
+ }
+
+ /* Free HC-private URB data*/
+ urb_priv_free(hcd, urb);
+
+ usb_release_bandwidth(urb->dev, urb, 0);
+
+ /* Hand the URB from HCD to its USB device driver, using its completion
+ functions */
+ usb_hcd_giveback_urb (hcd, urb);
+}
+
+static __u32 urb_num = 0;
+
+/* allocate and initialize URB private data */
+static int urb_priv_create(struct usb_hcd *hcd, struct urb *urb, int epid,
+ int mem_flags) {
+ struct crisv10_urb_priv *urb_priv;
+
+ urb_priv = kmalloc(sizeof *urb_priv, mem_flags);
+ if (!urb_priv)
+ return -ENOMEM;
+ memset(urb_priv, 0, sizeof *urb_priv);
+
+ urb_priv->epid = epid;
+ urb_priv->urb_state = NOT_STARTED;
+
+ urb->hcpriv = urb_priv;
+ /* Assign URB a sequence number, and increment counter */
+ urb_priv->urb_num = urb_num;
+ urb_num++;
+ return 0;
+}
+
+/* free URB private data */
+static void urb_priv_free(struct usb_hcd *hcd, struct urb *urb) {
+ int i;
+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
+ ASSERT(urb_priv != 0);
+
+ /* Check it has any SBs linked that needs to be freed*/
+ if(urb_priv->first_sb != NULL) {
+ struct USB_SB_Desc *next_sb, *first_sb, *last_sb;
+ int i = 0;
+ first_sb = urb_priv->first_sb;
+ last_sb = urb_priv->last_sb;
+ ASSERT(last_sb);
+ while(first_sb != last_sb) {
+ next_sb = (struct USB_SB_Desc *)phys_to_virt(first_sb->next);
+ kmem_cache_free(usb_desc_cache, first_sb);
+ first_sb = next_sb;
+ i++;
+ }
+ kmem_cache_free(usb_desc_cache, last_sb);
+ i++;
+ }
+
+ /* Check if it has any EPs in its Intr pool that also needs to be freed */
+ if(urb_priv->intr_ep_pool_length > 0) {
+ for(i = 0; i < urb_priv->intr_ep_pool_length; i++) {
+ kfree(urb_priv->intr_ep_pool[i]);
+ }
+ /*
+ tc_dbg("Freed %d EPs from URB:0x%x EP pool\n",
+ urb_priv->intr_ep_pool_length, (unsigned int)urb);
+ */
+ }
+
+ kfree(urb_priv);
+ urb->hcpriv = NULL;
+}
+
+static int ep_priv_create(struct usb_host_endpoint *ep, int mem_flags) {
+ struct crisv10_ep_priv *ep_priv;
+
+ ep_priv = kmalloc(sizeof *ep_priv, mem_flags);
+ if (!ep_priv)
+ return -ENOMEM;
+ memset(ep_priv, 0, sizeof *ep_priv);
+
+ ep->hcpriv = ep_priv;
+ return 0;
+}
+
+static void ep_priv_free(struct usb_host_endpoint *ep) {
+ struct crisv10_ep_priv *ep_priv = ep->hcpriv;
+ ASSERT(ep_priv);
+ kfree(ep_priv);
+ ep->hcpriv = NULL;
+}
+
+/* EPID handling functions, managing EP-list in Etrax through wrappers */
+/* ------------------------------------------------------------------- */
+
+/* Sets up a new EPID for an endpoint or returns existing if found */
+static int tc_setup_epid(struct usb_host_endpoint *ep, struct urb *urb,
+ int mem_flags) {
+ int epid;
+ char devnum, endpoint, out_traffic, slow;
+ int maxlen;
+ __u32 epid_data;
+ struct crisv10_ep_priv *ep_priv = ep->hcpriv;
+
+ DBFENTER;
+
+ /* Check if a valid epid already is setup for this endpoint */
+ if(ep_priv != NULL) {
+ return ep_priv->epid;
+ }
+
+ /* We must find and initiate a new epid for this urb. */
+ epid = tc_allocate_epid();
+
+ if (epid == -1) {
+ /* Failed to allocate a new epid. */
+ DBFEXIT;
+ return epid;
+ }
+
+ /* We now have a new epid to use. Claim it. */
+ epid_state[epid].inuse = 1;
+
+ /* Init private data for new endpoint */
+ if(ep_priv_create(ep, mem_flags) != 0) {
+ return -ENOMEM;
+ }
+ ep_priv = ep->hcpriv;
+ ep_priv->epid = epid;
+
+ devnum = usb_pipedevice(urb->pipe);
+ endpoint = usb_pipeendpoint(urb->pipe);
+ slow = (urb->dev->speed == USB_SPEED_LOW);
+ maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
+
+ if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
+ /* We want both IN and OUT control traffic to be put on the same
+ EP/SB list. */
+ out_traffic = 1;
+ } else {
+ out_traffic = usb_pipeout(urb->pipe);
+ }
+
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+ epid_data = IO_STATE(R_USB_EPT_DATA_ISO, valid, yes) |
+ /* FIXME: Change any to the actual port? */
+ IO_STATE(R_USB_EPT_DATA_ISO, port, any) |
+ IO_FIELD(R_USB_EPT_DATA_ISO, max_len, maxlen) |
+ IO_FIELD(R_USB_EPT_DATA_ISO, ep, endpoint) |
+ IO_FIELD(R_USB_EPT_DATA_ISO, dev, devnum);
+ etrax_epid_iso_set(epid, epid_data);
+ } else {
+ epid_data = IO_STATE(R_USB_EPT_DATA, valid, yes) |
+ IO_FIELD(R_USB_EPT_DATA, low_speed, slow) |
+ /* FIXME: Change any to the actual port? */
+ IO_STATE(R_USB_EPT_DATA, port, any) |
+ IO_FIELD(R_USB_EPT_DATA, max_len, maxlen) |
+ IO_FIELD(R_USB_EPT_DATA, ep, endpoint) |
+ IO_FIELD(R_USB_EPT_DATA, dev, devnum);
+ etrax_epid_set(epid, epid_data);
+ }
+
+ epid_state[epid].out_traffic = out_traffic;
+ epid_state[epid].type = usb_pipetype(urb->pipe);
+
+ tc_warn("Setting up ep:0x%x epid:%d (addr:%d endp:%d max_len:%d %s %s %s)\n",
+ (unsigned int)ep, epid, devnum, endpoint, maxlen,
+ str_type(urb->pipe), out_traffic ? "out" : "in",
+ slow ? "low" : "full");
+
+ /* Enable Isoc eof interrupt if we set up the first Isoc epid */
+ if(usb_pipeisoc(urb->pipe)) {
+ isoc_epid_counter++;
+ if(isoc_epid_counter == 1) {
+ isoc_warn("Enabled Isoc eof interrupt\n");
+ *R_USB_IRQ_MASK_SET |= IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set);
+ }
+ }
+
+ DBFEXIT;
+ return epid;
+}
+
+static void tc_free_epid(struct usb_host_endpoint *ep) {
+ unsigned long flags;
+ struct crisv10_ep_priv *ep_priv = ep->hcpriv;
+ int epid;
+ volatile int timeout = 10000;
+
+ DBFENTER;
+
+ if (ep_priv == NULL) {
+ tc_warn("Trying to free unused epid on ep:0x%x\n", (unsigned int)ep);
+ DBFEXIT;
+ return;
+ }
+
+ epid = ep_priv->epid;
+
+ /* Disable Isoc eof interrupt if we free the last Isoc epid */
+ if(epid_isoc(epid)) {
+ ASSERT(isoc_epid_counter > 0);
+ isoc_epid_counter--;
+ if(isoc_epid_counter == 0) {
+ *R_USB_IRQ_MASK_SET &= ~IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set);
+ isoc_warn("Disabled Isoc eof interrupt\n");
+ }
+ }
+
+ /* Take lock manualy instead of in epid_x_x wrappers,
+ because we need to be polling here */
+ spin_lock_irqsave(&etrax_epid_lock, flags);
+
+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
+ nop();
+ while((*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) &&
+ (timeout-- > 0));
+ if(timeout == 0) {
+ warn("Timeout while waiting for epid:%d to drop hold\n", epid);
+ }
+ /* This will, among other things, set the valid field to 0. */
+ *R_USB_EPT_DATA = 0;
+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
+
+ /* Free resource in software state info list */
+ epid_state[epid].inuse = 0;
+
+ /* Free private endpoint data */
+ ep_priv_free(ep);
+
+ DBFEXIT;
+}
+
+static int tc_allocate_epid(void) {
+ int i;
+ DBFENTER;
+ for (i = 0; i < NBR_OF_EPIDS; i++) {
+ if (!epid_inuse(i)) {
+ DBFEXIT;
+ return i;
+ }
+ }
+
+ tc_warn("Found no free epids\n");
+ DBFEXIT;
+ return -1;
}
-static void init_tx_intr_ep(void)
-{
- int i;
+/* Wrappers around the list functions (include/linux/list.h). */
+/* ---------------------------------------------------------- */
+static inline int __urb_list_empty(int epid) {
+ int retval;
+ retval = list_empty(&urb_list[epid]);
+ return retval;
+}
- DBFENTER;
+/* Returns first urb for this epid, or NULL if list is empty. */
+static inline struct urb *urb_list_first(int epid) {
+ unsigned long flags;
+ struct urb *first_urb = 0;
+ spin_lock_irqsave(&urb_list_lock, flags);
+ if (!__urb_list_empty(epid)) {
+ /* Get the first urb (i.e. head->next). */
+ urb_entry_t *urb_entry = list_entry((&urb_list[epid])->next, urb_entry_t, list);
+ first_urb = urb_entry->urb;
+ }
+ spin_unlock_irqrestore(&urb_list_lock, flags);
+ return first_urb;
+}
- /* Read comment at zout_buffer declaration for an explanation to this. */
- TxIntrSB_zout.sw_len = 1;
- TxIntrSB_zout.next = 0;
- TxIntrSB_zout.buf = virt_to_phys(&zout_buffer[0]);
- TxIntrSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) |
- IO_STATE(USB_SB_command, tt, zout) |
- IO_STATE(USB_SB_command, full, yes) |
- IO_STATE(USB_SB_command, eot, yes) |
- IO_STATE(USB_SB_command, eol, yes));
-
- for (i = 0; i < (MAX_INTR_INTERVAL - 1); i++) {
- CHECK_ALIGN(&TxIntrEPList[i]);
- TxIntrEPList[i].hw_len = 0;
- TxIntrEPList[i].command =
- (IO_STATE(USB_EP_command, eof, yes) |
- IO_STATE(USB_EP_command, enable, yes) |
- IO_FIELD(USB_EP_command, epid, INVALID_EPID));
- TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout);
- TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[i + 1]);
- }
+/* Adds an urb_entry last in the list for this epid. */
+static inline void urb_list_add(struct urb *urb, int epid, int mem_flags) {
+ unsigned long flags;
+ urb_entry_t *urb_entry = (urb_entry_t *)kmalloc(sizeof(urb_entry_t), mem_flags);
+ ASSERT(urb_entry);
+
+ urb_entry->urb = urb;
+ spin_lock_irqsave(&urb_list_lock, flags);
+ list_add_tail(&urb_entry->list, &urb_list[epid]);
+ spin_unlock_irqrestore(&urb_list_lock, flags);
+}
- CHECK_ALIGN(&TxIntrEPList[i]);
- TxIntrEPList[i].hw_len = 0;
- TxIntrEPList[i].command =
- (IO_STATE(USB_EP_command, eof, yes) |
- IO_STATE(USB_EP_command, eol, yes) |
- IO_STATE(USB_EP_command, enable, yes) |
- IO_FIELD(USB_EP_command, epid, INVALID_EPID));
- TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout);
- TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[0]);
-
- *R_DMA_CH8_SUB2_EP = virt_to_phys(&TxIntrEPList[0]);
- *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start);
- DBFEXIT;
+/* Search through the list for an element that contains this urb. (The list
+ is expected to be short and the one we are about to delete will often be
+ the first in the list.)
+ Should be protected by spin_locks in calling function */
+static inline urb_entry_t *__urb_list_entry(struct urb *urb, int epid) {
+ struct list_head *entry;
+ struct list_head *tmp;
+ urb_entry_t *urb_entry;
+
+ list_for_each_safe(entry, tmp, &urb_list[epid]) {
+ urb_entry = list_entry(entry, urb_entry_t, list);
+ ASSERT(urb_entry);
+ ASSERT(urb_entry->urb);
+
+ if (urb_entry->urb == urb) {
+ return urb_entry;
+ }
+ }
+ return 0;
+}
+
+/* Same function as above but for global use. Protects list by spinlock */
+static inline urb_entry_t *urb_list_entry(struct urb *urb, int epid) {
+ unsigned long flags;
+ urb_entry_t *urb_entry;
+ spin_lock_irqsave(&urb_list_lock, flags);
+ urb_entry = __urb_list_entry(urb, epid);
+ spin_unlock_irqrestore(&urb_list_lock, flags);
+ return (urb_entry);
}
-static void init_tx_isoc_ep(void)
-{
- int i;
+/* Delete an urb from the list. */
+static inline void urb_list_del(struct urb *urb, int epid) {
+ unsigned long flags;
+ urb_entry_t *urb_entry;
+
+ /* Delete entry and free. */
+ spin_lock_irqsave(&urb_list_lock, flags);
+ urb_entry = __urb_list_entry(urb, epid);
+ ASSERT(urb_entry);
+
+ list_del(&urb_entry->list);
+ spin_unlock_irqrestore(&urb_list_lock, flags);
+ kfree(urb_entry);
+}
- DBFENTER;
+/* Move an urb to the end of the list. */
+static inline void urb_list_move_last(struct urb *urb, int epid) {
+ unsigned long flags;
+ urb_entry_t *urb_entry;
+
+ spin_lock_irqsave(&urb_list_lock, flags);
+ urb_entry = __urb_list_entry(urb, epid);
+ ASSERT(urb_entry);
+
+ list_del(&urb_entry->list);
+ list_add_tail(&urb_entry->list, &urb_list[epid]);
+ spin_unlock_irqrestore(&urb_list_lock, flags);
+}
- /* Read comment at zout_buffer declaration for an explanation to this. */
- TxIsocSB_zout.sw_len = 1;
- TxIsocSB_zout.next = 0;
- TxIsocSB_zout.buf = virt_to_phys(&zout_buffer[0]);
- TxIsocSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) |
- IO_STATE(USB_SB_command, tt, zout) |
- IO_STATE(USB_SB_command, full, yes) |
- IO_STATE(USB_SB_command, eot, yes) |
- IO_STATE(USB_SB_command, eol, yes));
-
- /* The last isochronous EP descriptor is a dummy. */
-
- for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
- CHECK_ALIGN(&TxIsocEPList[i]);
- TxIsocEPList[i].hw_len = 0;
- TxIsocEPList[i].command = IO_FIELD(USB_EP_command, epid, i);
- TxIsocEPList[i].sub = 0;
- TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[i + 1]);
+/* Get the next urb in the list. */
+static inline struct urb *urb_list_next(struct urb *urb, int epid) {
+ unsigned long flags;
+ urb_entry_t *urb_entry;
+
+ spin_lock_irqsave(&urb_list_lock, flags);
+ urb_entry = __urb_list_entry(urb, epid);
+ ASSERT(urb_entry);
+
+ if (urb_entry->list.next != &urb_list[epid]) {
+ struct list_head *elem = urb_entry->list.next;
+ urb_entry = list_entry(elem, urb_entry_t, list);
+ spin_unlock_irqrestore(&urb_list_lock, flags);
+ return urb_entry->urb;
+ } else {
+ spin_unlock_irqrestore(&urb_list_lock, flags);
+ return NULL;
+ }
+}
+
+struct USB_EP_Desc* create_ep(int epid, struct USB_SB_Desc* sb_desc,
+ int mem_flags) {
+ struct USB_EP_Desc *ep_desc;
+ ep_desc = (struct USB_EP_Desc *) kmem_cache_alloc(usb_desc_cache, mem_flags);
+ if(ep_desc == NULL)
+ return NULL;
+ memset(ep_desc, 0, sizeof(struct USB_EP_Desc));
+
+ ep_desc->hw_len = 0;
+ ep_desc->command = (IO_FIELD(USB_EP_command, epid, epid) |
+ IO_STATE(USB_EP_command, enable, yes));
+ if(sb_desc == NULL) {
+ ep_desc->sub = 0;
+ } else {
+ ep_desc->sub = virt_to_phys(sb_desc);
+ }
+ return ep_desc;
+}
+
+#define TT_ZOUT 0
+#define TT_IN 1
+#define TT_OUT 2
+#define TT_SETUP 3
+
+#define CMD_EOL IO_STATE(USB_SB_command, eol, yes)
+#define CMD_INTR IO_STATE(USB_SB_command, intr, yes)
+#define CMD_FULL IO_STATE(USB_SB_command, full, yes)
+
+/* Allocation and setup of a generic SB. Used to create SETUP, OUT and ZOUT
+ SBs. Also used by create_sb_in() to avoid same allocation procedure at two
+ places */
+struct USB_SB_Desc* create_sb(struct USB_SB_Desc* sb_prev, int tt, void* data,
+ int datalen, int mem_flags) {
+ struct USB_SB_Desc *sb_desc;
+ sb_desc = (struct USB_SB_Desc*)kmem_cache_alloc(usb_desc_cache, mem_flags);
+ if(sb_desc == NULL)
+ return NULL;
+ memset(sb_desc, 0, sizeof(struct USB_SB_Desc));
+
+ sb_desc->command = IO_FIELD(USB_SB_command, tt, tt) |
+ IO_STATE(USB_SB_command, eot, yes);
+
+ sb_desc->sw_len = datalen;
+ if(data != NULL) {
+ sb_desc->buf = virt_to_phys(data);
+ } else {
+ sb_desc->buf = 0;
+ }
+ if(sb_prev != NULL) {
+ sb_prev->next = virt_to_phys(sb_desc);
+ }
+ return sb_desc;
+}
+
+/* Creates a copy of an existing SB by allocation space for it and copy
+ settings */
+struct USB_SB_Desc* create_sb_copy(struct USB_SB_Desc* sb_orig, int mem_flags) {
+ struct USB_SB_Desc *sb_desc;
+ sb_desc = (struct USB_SB_Desc*)kmem_cache_alloc(usb_desc_cache, mem_flags);
+ if(sb_desc == NULL)
+ return NULL;
+
+ memcpy(sb_desc, sb_orig, sizeof(struct USB_SB_Desc));
+ return sb_desc;
+}
+
+/* A specific create_sb function for creation of in SBs. This is due to
+ that datalen in In SBs shows how many packets we are expecting. It also
+ sets up the rem field to show if how many bytes we expect in last packet
+ if it's not a full one */
+struct USB_SB_Desc* create_sb_in(struct USB_SB_Desc* sb_prev, int datalen,
+ int maxlen, int mem_flags) {
+ struct USB_SB_Desc *sb_desc;
+ sb_desc = create_sb(sb_prev, TT_IN, NULL,
+ datalen ? (datalen - 1) / maxlen + 1 : 0, mem_flags);
+ if(sb_desc == NULL)
+ return NULL;
+ sb_desc->command |= IO_FIELD(USB_SB_command, rem, datalen % maxlen);
+ return sb_desc;
+}
+
+void set_sb_cmds(struct USB_SB_Desc *sb_desc, __u16 flags) {
+ sb_desc->command |= flags;
+}
+
+int create_sb_for_urb(struct urb *urb, int mem_flags) {
+ int is_out = !usb_pipein(urb->pipe);
+ int type = usb_pipetype(urb->pipe);
+ int maxlen = usb_maxpacket(urb->dev, urb->pipe, is_out);
+ int buf_len = urb->transfer_buffer_length;
+ void *buf = buf_len > 0 ? urb->transfer_buffer : NULL;
+ struct USB_SB_Desc *sb_desc = NULL;
+
+ struct crisv10_urb_priv *urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
+ ASSERT(urb_priv != NULL);
+
+ switch(type) {
+ case PIPE_CONTROL:
+ /* Setup stage */
+ sb_desc = create_sb(NULL, TT_SETUP, urb->setup_packet, 8, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+ set_sb_cmds(sb_desc, CMD_FULL);
+
+ /* Attach first SB to URB */
+ urb_priv->first_sb = sb_desc;
+
+ if (is_out) { /* Out Control URB */
+ /* If this Control OUT transfer has an optional data stage we add
+ an OUT token before the mandatory IN (status) token */
+ if ((buf_len > 0) && buf) {
+ sb_desc = create_sb(sb_desc, TT_OUT, buf, buf_len, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+ set_sb_cmds(sb_desc, CMD_FULL);
+ }
+
+ /* Status stage */
+ /* The data length has to be exactly 1. This is due to a requirement
+ of the USB specification that a host must be prepared to receive
+ data in the status phase */
+ sb_desc = create_sb(sb_desc, TT_IN, NULL, 1, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+ } else { /* In control URB */
+ /* Data stage */
+ sb_desc = create_sb_in(sb_desc, buf_len, maxlen, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+
+ /* Status stage */
+ /* Read comment at zout_buffer declaration for an explanation to this. */
+ sb_desc = create_sb(sb_desc, TT_ZOUT, &zout_buffer[0], 1, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+ /* Set descriptor interrupt flag for in URBs so we can finish URB after
+ zout-packet has been sent */
+ set_sb_cmds(sb_desc, CMD_INTR | CMD_FULL);
+ }
+ /* Set end-of-list flag in last SB */
+ set_sb_cmds(sb_desc, CMD_EOL);
+ /* Attach last SB to URB */
+ urb_priv->last_sb = sb_desc;
+ break;
+
+ case PIPE_BULK:
+ if (is_out) { /* Out Bulk URB */
+ sb_desc = create_sb(NULL, TT_OUT, buf, buf_len, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+ /* The full field is set to yes, even if we don't actually check that
+ this is a full-length transfer (i.e., that transfer_buffer_length %
+ maxlen = 0).
+ Setting full prevents the USB controller from sending an empty packet
+ in that case. However, if URB_ZERO_PACKET was set we want that. */
+ if (!(urb->transfer_flags & URB_ZERO_PACKET)) {
+ set_sb_cmds(sb_desc, CMD_FULL);
+ }
+ } else { /* In Bulk URB */
+ sb_desc = create_sb_in(NULL, buf_len, maxlen, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+ }
+ /* Set end-of-list flag for last SB */
+ set_sb_cmds(sb_desc, CMD_EOL);
+
+ /* Attach SB to URB */
+ urb_priv->first_sb = sb_desc;
+ urb_priv->last_sb = sb_desc;
+ break;
+
+ case PIPE_INTERRUPT:
+ if(is_out) { /* Out Intr URB */
+ sb_desc = create_sb(NULL, TT_OUT, buf, buf_len, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+
+ /* The full field is set to yes, even if we don't actually check that
+ this is a full-length transfer (i.e., that transfer_buffer_length %
+ maxlen = 0).
+ Setting full prevents the USB controller from sending an empty packet
+ in that case. However, if URB_ZERO_PACKET was set we want that. */
+ if (!(urb->transfer_flags & URB_ZERO_PACKET)) {
+ set_sb_cmds(sb_desc, CMD_FULL);
+ }
+ /* Only generate TX interrupt if it's a Out URB*/
+ set_sb_cmds(sb_desc, CMD_INTR);
+
+ } else { /* In Intr URB */
+ sb_desc = create_sb_in(NULL, buf_len, maxlen, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+ }
+ /* Set end-of-list flag for last SB */
+ set_sb_cmds(sb_desc, CMD_EOL);
+
+ /* Attach SB to URB */
+ urb_priv->first_sb = sb_desc;
+ urb_priv->last_sb = sb_desc;
+
+ break;
+ case PIPE_ISOCHRONOUS:
+ if(is_out) { /* Out Isoc URB */
+ int i;
+ if(urb->number_of_packets == 0) {
+ tc_err("Can't create SBs for Isoc URB with zero packets\n");
+ return -EPIPE;
+ }
+ /* Create one SB descriptor for each packet and link them together. */
+ for(i = 0; i < urb->number_of_packets; i++) {
+ if (urb->iso_frame_desc[i].length > 0) {
+
+ sb_desc = create_sb(sb_desc, TT_OUT, urb->transfer_buffer +
+ urb->iso_frame_desc[i].offset,
+ urb->iso_frame_desc[i].length, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+
+ /* Check if it's a full length packet */
+ if (urb->iso_frame_desc[i].length ==
+ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) {
+ set_sb_cmds(sb_desc, CMD_FULL);
+ }
+
+ } else { /* zero length packet */
+ sb_desc = create_sb(sb_desc, TT_ZOUT, &zout_buffer[0], 1, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+ set_sb_cmds(sb_desc, CMD_FULL);
+ }
+ /* Attach first SB descriptor to URB */
+ if (i == 0) {
+ urb_priv->first_sb = sb_desc;
+ }
+ }
+ /* Set interrupt and end-of-list flags in last SB */
+ set_sb_cmds(sb_desc, CMD_INTR | CMD_EOL);
+ /* Attach last SB descriptor to URB */
+ urb_priv->last_sb = sb_desc;
+ tc_dbg("Created %d out SBs for Isoc URB:0x%x\n",
+ urb->number_of_packets, (unsigned int)urb);
+ } else { /* In Isoc URB */
+ /* Actual number of packets is not relevant for periodic in traffic as
+ long as it is more than zero. Set to 1 always. */
+ sb_desc = create_sb(sb_desc, TT_IN, NULL, 1, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+ /* Set end-of-list flags for SB */
+ set_sb_cmds(sb_desc, CMD_EOL);
+
+ /* Attach SB to URB */
+ urb_priv->first_sb = sb_desc;
+ urb_priv->last_sb = sb_desc;
+ }
+ break;
+ default:
+ tc_err("Unknown pipe-type\n");
+ return -EPIPE;
+ break;
+ }
+ return 0;
+}
+
+int init_intr_urb(struct urb *urb, int mem_flags) {
+ struct crisv10_urb_priv *urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
+ struct USB_EP_Desc* ep_desc;
+ int interval;
+ int i;
+ int ep_count;
+
+ ASSERT(urb_priv != NULL);
+ ASSERT(usb_pipeint(urb->pipe));
+ /* We can't support interval longer than amount of eof descriptors in
+ TxIntrEPList */
+ if(urb->interval > MAX_INTR_INTERVAL) {
+ tc_err("Interrupt interval %dms too big (max: %dms)\n", urb->interval,
+ MAX_INTR_INTERVAL);
+ return -EINVAL;
+ }
+
+ /* We assume that the SB descriptors already have been setup */
+ ASSERT(urb_priv->first_sb != NULL);
+
+ /* Round of the interval to 2^n, it is obvious that this code favours
+ smaller numbers, but that is actually a good thing */
+ /* FIXME: The "rounding error" for larger intervals will be quite
+ large. For in traffic this shouldn't be a problem since it will only
+ mean that we "poll" more often. */
+ interval = urb->interval;
+ for (i = 0; interval; i++) {
+ interval = interval >> 1;
+ }
+ urb_priv->interval = 1 << (i - 1);
+
+ /* We can only have max interval for Out Interrupt due to that we can only
+ handle one linked in EP for a certain epid in the Intr descr array at the
+ time. The USB Controller in the Etrax 100LX continues to process Intr EPs
+ so we have no way of knowing which one that caused the actual transfer if
+ we have several linked in. */
+ if(usb_pipeout(urb->pipe)) {
+ urb_priv->interval = MAX_INTR_INTERVAL;
+ }
+
+ /* Calculate amount of EPs needed */
+ ep_count = MAX_INTR_INTERVAL / urb_priv->interval;
+
+ for(i = 0; i < ep_count; i++) {
+ ep_desc = create_ep(urb_priv->epid, urb_priv->first_sb, mem_flags);
+ if(ep_desc == NULL) {
+ /* Free any descriptors that we may have allocated before failure */
+ while(i > 0) {
+ i--;
+ kfree(urb_priv->intr_ep_pool[i]);
+ }
+ return -ENOMEM;
+ }
+ urb_priv->intr_ep_pool[i] = ep_desc;
+ }
+ urb_priv->intr_ep_pool_length = ep_count;
+ return 0;
+}
+
+/* DMA RX/TX functions */
+/* ----------------------- */
+
+static void tc_dma_init_rx_list(void) {
+ int i;
+
+ /* Setup descriptor list except last one */
+ for (i = 0; i < (NBR_OF_RX_DESC - 1); i++) {
+ RxDescList[i].sw_len = RX_DESC_BUF_SIZE;
+ RxDescList[i].command = 0;
+ RxDescList[i].next = virt_to_phys(&RxDescList[i + 1]);
+ RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE));
+ RxDescList[i].hw_len = 0;
+ RxDescList[i].status = 0;
+
+ /* DMA IN cache bug. (struct etrax_dma_descr has the same layout as
+ USB_IN_Desc for the relevant fields.) */
+ prepare_rx_descriptor((struct etrax_dma_descr*)&RxDescList[i]);
+
+ }
+ /* Special handling of last descriptor */
+ RxDescList[i].sw_len = RX_DESC_BUF_SIZE;
+ RxDescList[i].command = IO_STATE(USB_IN_command, eol, yes);
+ RxDescList[i].next = virt_to_phys(&RxDescList[0]);
+ RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE));
+ RxDescList[i].hw_len = 0;
+ RxDescList[i].status = 0;
+
+ /* Setup list pointers that show progress in list */
+ myNextRxDesc = &RxDescList[0];
+ myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1];
+
+ flush_etrax_cache();
+ /* Point DMA to first descriptor in list and start it */
+ *R_DMA_CH9_FIRST = virt_to_phys(myNextRxDesc);
+ *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, start);
+}
+
+
+static void tc_dma_init_tx_bulk_list(void) {
+ int i;
+ volatile struct USB_EP_Desc *epDescr;
+
+ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
+ epDescr = &(TxBulkEPList[i]);
+ CHECK_ALIGN(epDescr);
+ epDescr->hw_len = 0;
+ epDescr->command = IO_FIELD(USB_EP_command, epid, i);
+ epDescr->sub = 0;
+ epDescr->next = virt_to_phys(&TxBulkEPList[i + 1]);
+
+ /* Initiate two EPs, disabled and with the eol flag set. No need for any
+ preserved epid. */
+
+ /* The first one has the intr flag set so we get an interrupt when the DMA
+ channel is about to become disabled. */
+ CHECK_ALIGN(&TxBulkDummyEPList[i][0]);
+ TxBulkDummyEPList[i][0].hw_len = 0;
+ TxBulkDummyEPList[i][0].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) |
+ IO_STATE(USB_EP_command, eol, yes) |
+ IO_STATE(USB_EP_command, intr, yes));
+ TxBulkDummyEPList[i][0].sub = 0;
+ TxBulkDummyEPList[i][0].next = virt_to_phys(&TxBulkDummyEPList[i][1]);
+
+ /* The second one. */
+ CHECK_ALIGN(&TxBulkDummyEPList[i][1]);
+ TxBulkDummyEPList[i][1].hw_len = 0;
+ TxBulkDummyEPList[i][1].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) |
+ IO_STATE(USB_EP_command, eol, yes));
+ TxBulkDummyEPList[i][1].sub = 0;
+ /* The last dummy's next pointer is the same as the current EP's next pointer. */
+ TxBulkDummyEPList[i][1].next = virt_to_phys(&TxBulkEPList[i + 1]);
+ }
+
+ /* Special handling of last descr in list, make list circular */
+ epDescr = &TxBulkEPList[i];
+ CHECK_ALIGN(epDescr);
+ epDescr->hw_len = 0;
+ epDescr->command = IO_STATE(USB_EP_command, eol, yes) |
+ IO_FIELD(USB_EP_command, epid, i);
+ epDescr->sub = 0;
+ epDescr->next = virt_to_phys(&TxBulkEPList[0]);
+
+ /* Init DMA sub-channel pointers to last item in each list */
+ *R_DMA_CH8_SUB0_EP = virt_to_phys(&TxBulkEPList[i]);
+ /* No point in starting the bulk channel yet.
+ *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */
+}
+
+static void tc_dma_init_tx_ctrl_list(void) {
+ int i;
+ volatile struct USB_EP_Desc *epDescr;
+
+ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
+ epDescr = &(TxCtrlEPList[i]);
+ CHECK_ALIGN(epDescr);
+ epDescr->hw_len = 0;
+ epDescr->command = IO_FIELD(USB_EP_command, epid, i);
+ epDescr->sub = 0;
+ epDescr->next = virt_to_phys(&TxCtrlEPList[i + 1]);
+ }
+ /* Special handling of last descr in list, make list circular */
+ epDescr = &TxCtrlEPList[i];
+ CHECK_ALIGN(epDescr);
+ epDescr->hw_len = 0;
+ epDescr->command = IO_STATE(USB_EP_command, eol, yes) |
+ IO_FIELD(USB_EP_command, epid, i);
+ epDescr->sub = 0;
+ epDescr->next = virt_to_phys(&TxCtrlEPList[0]);
+
+ /* Init DMA sub-channel pointers to last item in each list */
+ *R_DMA_CH8_SUB1_EP = virt_to_phys(&TxCtrlEPList[i]);
+ /* No point in starting the ctrl channel yet.
+ *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */
+}
+
+
+static void tc_dma_init_tx_intr_list(void) {
+ int i;
+
+ TxIntrSB_zout.sw_len = 1;
+ TxIntrSB_zout.next = 0;
+ TxIntrSB_zout.buf = virt_to_phys(&zout_buffer[0]);
+ TxIntrSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) |
+ IO_STATE(USB_SB_command, tt, zout) |
+ IO_STATE(USB_SB_command, full, yes) |
+ IO_STATE(USB_SB_command, eot, yes) |
+ IO_STATE(USB_SB_command, eol, yes));
+
+ for (i = 0; i < (MAX_INTR_INTERVAL - 1); i++) {
+ CHECK_ALIGN(&TxIntrEPList[i]);
+ TxIntrEPList[i].hw_len = 0;
+ TxIntrEPList[i].command =
+ (IO_STATE(USB_EP_command, eof, yes) |
+ IO_STATE(USB_EP_command, enable, yes) |
+ IO_FIELD(USB_EP_command, epid, INVALID_EPID));
+ TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout);
+ TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[i + 1]);
+ }
+
+ /* Special handling of last descr in list, make list circular */
+ CHECK_ALIGN(&TxIntrEPList[i]);
+ TxIntrEPList[i].hw_len = 0;
+ TxIntrEPList[i].command =
+ (IO_STATE(USB_EP_command, eof, yes) |
+ IO_STATE(USB_EP_command, eol, yes) |
+ IO_STATE(USB_EP_command, enable, yes) |
+ IO_FIELD(USB_EP_command, epid, INVALID_EPID));
+ TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout);
+ TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[0]);
+
+ intr_dbg("Initiated Intr EP descriptor list\n");
+
+
+ /* Connect DMA 8 sub-channel 2 to first in list */
+ *R_DMA_CH8_SUB2_EP = virt_to_phys(&TxIntrEPList[0]);
+}
+
+static void tc_dma_init_tx_isoc_list(void) {
+ int i;
+
+ DBFENTER;
+
+ /* Read comment at zout_buffer declaration for an explanation to this. */
+ TxIsocSB_zout.sw_len = 1;
+ TxIsocSB_zout.next = 0;
+ TxIsocSB_zout.buf = virt_to_phys(&zout_buffer[0]);
+ TxIsocSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) |
+ IO_STATE(USB_SB_command, tt, zout) |
+ IO_STATE(USB_SB_command, full, yes) |
+ IO_STATE(USB_SB_command, eot, yes) |
+ IO_STATE(USB_SB_command, eol, yes));
+
+ /* The last isochronous EP descriptor is a dummy. */
+ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
+ CHECK_ALIGN(&TxIsocEPList[i]);
+ TxIsocEPList[i].hw_len = 0;
+ TxIsocEPList[i].command = IO_FIELD(USB_EP_command, epid, i);
+ TxIsocEPList[i].sub = 0;
+ TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[i + 1]);
+ }
+
+ CHECK_ALIGN(&TxIsocEPList[i]);
+ TxIsocEPList[i].hw_len = 0;
+
+ /* Must enable the last EP descr to get eof interrupt. */
+ TxIsocEPList[i].command = (IO_STATE(USB_EP_command, enable, yes) |
+ IO_STATE(USB_EP_command, eof, yes) |
+ IO_STATE(USB_EP_command, eol, yes) |
+ IO_FIELD(USB_EP_command, epid, INVALID_EPID));
+ TxIsocEPList[i].sub = virt_to_phys(&TxIsocSB_zout);
+ TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[0]);
+
+ *R_DMA_CH8_SUB3_EP = virt_to_phys(&TxIsocEPList[0]);
+ *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start);
+}
+
+static int tc_dma_init(struct usb_hcd *hcd) {
+ tc_dma_init_rx_list();
+ tc_dma_init_tx_bulk_list();
+ tc_dma_init_tx_ctrl_list();
+ tc_dma_init_tx_intr_list();
+ tc_dma_init_tx_isoc_list();
+
+ if (cris_request_dma(USB_TX_DMA_NBR,
+ "ETRAX 100LX built-in USB (Tx)",
+ DMA_VERBOSE_ON_ERROR,
+ dma_usb)) {
+ err("Could not allocate DMA ch 8 for USB");
+ return -EBUSY;
+ }
+
+ if (cris_request_dma(USB_RX_DMA_NBR,
+ "ETRAX 100LX built-in USB (Rx)",
+ DMA_VERBOSE_ON_ERROR,
+ dma_usb)) {
+ err("Could not allocate DMA ch 9 for USB");
+ return -EBUSY;
+ }
+
+ *R_IRQ_MASK2_SET =
+ /* Note that these interrupts are not used. */
+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub0_descr, set) |
+ /* Sub channel 1 (ctrl) descr. interrupts are used. */
+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub1_descr, set) |
+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub2_descr, set) |
+ /* Sub channel 3 (isoc) descr. interrupts are used. */
+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub3_descr, set);
+
+ /* Note that the dma9_descr interrupt is not used. */
+ *R_IRQ_MASK2_SET =
+ IO_STATE(R_IRQ_MASK2_SET, dma9_eop, set) |
+ IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set);
+
+ if (request_irq(ETRAX_USB_RX_IRQ, tc_dma_rx_interrupt, 0,
+ "ETRAX 100LX built-in USB (Rx)", hcd)) {
+ err("Could not allocate IRQ %d for USB", ETRAX_USB_RX_IRQ);
+ return -EBUSY;
+ }
+
+ if (request_irq(ETRAX_USB_TX_IRQ, tc_dma_tx_interrupt, 0,
+ "ETRAX 100LX built-in USB (Tx)", hcd)) {
+ err("Could not allocate IRQ %d for USB", ETRAX_USB_TX_IRQ);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static void tc_dma_destroy(void) {
+ free_irq(ETRAX_USB_RX_IRQ, NULL);
+ free_irq(ETRAX_USB_TX_IRQ, NULL);
+
+ cris_free_dma(USB_TX_DMA_NBR, "ETRAX 100LX built-in USB (Tx)");
+ cris_free_dma(USB_RX_DMA_NBR, "ETRAX 100LX built-in USB (Rx)");
+
+}
+
+static void tc_dma_link_intr_urb(struct urb *urb);
+
+/* Handle processing of Bulk, Ctrl and Intr queues */
+static void tc_dma_process_queue(int epid) {
+ struct urb *urb;
+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
+ unsigned long flags;
+ char toggle;
+
+ if(epid_state[epid].disabled) {
+ /* Don't process any URBs on a disabled endpoint */
+ return;
+ }
+
+ /* Do not disturb us while fiddling with EPs and epids */
+ local_irq_save(flags);
+
+ /* For bulk, Ctrl and Intr can we only have one URB active at a time for
+ a specific EP. */
+ if(activeUrbList[epid] != NULL) {
+ /* An URB is already active on EP, skip checking queue */
+ local_irq_restore(flags);
+ return;
+ }
+
+ urb = urb_list_first(epid);
+ if(urb == NULL) {
+ /* No URB waiting in EP queue. Nothing do to */
+ local_irq_restore(flags);
+ return;
+ }
+
+ urb_priv = urb->hcpriv;
+ ASSERT(urb_priv != NULL);
+ ASSERT(urb_priv->urb_state == NOT_STARTED);
+ ASSERT(!usb_pipeisoc(urb->pipe));
+
+ /* Remove this URB from the queue and move it to active */
+ activeUrbList[epid] = urb;
+ urb_list_del(urb, epid);
+
+ urb_priv->urb_state = STARTED;
+
+ /* Reset error counters (regardless of which direction this traffic is). */
+ etrax_epid_clear_error(epid);
+
+ /* Special handling of Intr EP lists */
+ if(usb_pipeint(urb->pipe)) {
+ tc_dma_link_intr_urb(urb);
+ local_irq_restore(flags);
+ return;
+ }
+
+ /* Software must preset the toggle bits for Bulk and Ctrl */
+ if(usb_pipecontrol(urb->pipe)) {
+ /* Toggle bits are initialized only during setup transaction in a
+ CTRL transfer */
+ etrax_epid_set_toggle(epid, 0, 0);
+ etrax_epid_set_toggle(epid, 1, 0);
+ } else {
+ toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+ usb_pipeout(urb->pipe));
+ etrax_epid_set_toggle(epid, usb_pipeout(urb->pipe), toggle);
+ }
+
+ tc_dbg("Added SBs from (URB:0x%x %s %s) to epid %d: %s\n",
+ (unsigned int)urb, str_dir(urb->pipe), str_type(urb->pipe), epid,
+ sblist_to_str(urb_priv->first_sb));
+
+ /* We start the DMA sub channel without checking if it's running or not,
+ because:
+ 1) If it's already running, issuing the start command is a nop.
+ 2) We avoid a test-and-set race condition. */
+ switch(usb_pipetype(urb->pipe)) {
+ case PIPE_BULK:
+ /* Assert that the EP descriptor is disabled. */
+ ASSERT(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)));
+
+ /* Set up and enable the EP descriptor. */
+ TxBulkEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
+ TxBulkEPList[epid].hw_len = 0;
+ TxBulkEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
+
+ /* Check if the dummy list is already with us (if several urbs were queued). */
+ if (usb_pipein(urb->pipe) && (TxBulkEPList[epid].next != virt_to_phys(&TxBulkDummyEPList[epid][0]))) {
+ tc_dbg("Inviting dummy list to the party for urb 0x%lx, epid %d",
+ (unsigned long)urb, epid);
+
+ /* We don't need to check if the DMA is at this EP or not before changing the
+ next pointer, since we will do it in one 32-bit write (EP descriptors are
+ 32-bit aligned). */
+ TxBulkEPList[epid].next = virt_to_phys(&TxBulkDummyEPList[epid][0]);
+ }
+
+ restart_dma8_sub0();
+
+ /* Update/restart the bulk start timer since we just started the channel.*/
+ mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL);
+ /* Update/restart the bulk eot timer since we just inserted traffic. */
+ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
+ break;
+ case PIPE_CONTROL:
+ /* Assert that the EP descriptor is disabled. */
+ ASSERT(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)));
+
+ /* Set up and enable the EP descriptor. */
+ TxCtrlEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
+ TxCtrlEPList[epid].hw_len = 0;
+ TxCtrlEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
+
+ *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start);
+ break;
+ }
+ local_irq_restore(flags);
+}
+
+static void tc_dma_link_intr_urb(struct urb *urb) {
+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
+ volatile struct USB_EP_Desc *tmp_ep;
+ struct USB_EP_Desc *ep_desc;
+ int i = 0, epid;
+ int pool_idx = 0;
+
+ ASSERT(urb_priv != NULL);
+ epid = urb_priv->epid;
+ ASSERT(urb_priv->interval > 0);
+ ASSERT(urb_priv->intr_ep_pool_length > 0);
+
+ tmp_ep = &TxIntrEPList[0];
+
+ /* Only insert one EP descriptor in list for Out Intr URBs.
+ We can only handle Out Intr with interval of 128ms because
+ it's not possible to insert several Out Intr EPs because they
+ are not consumed by the DMA. */
+ if(usb_pipeout(urb->pipe)) {
+ ep_desc = urb_priv->intr_ep_pool[0];
+ ASSERT(ep_desc);
+ ep_desc->next = tmp_ep->next;
+ tmp_ep->next = virt_to_phys(ep_desc);
+ i++;
+ } else {
+ /* Loop through Intr EP descriptor list and insert EP for URB at
+ specified interval */
+ do {
+ /* Each EP descriptor with eof flag sat signals a new frame */
+ if (tmp_ep->command & IO_MASK(USB_EP_command, eof)) {
+ /* Insert a EP from URBs EP pool at correct interval */
+ if ((i % urb_priv->interval) == 0) {
+ ep_desc = urb_priv->intr_ep_pool[pool_idx];
+ ASSERT(ep_desc);
+ ep_desc->next = tmp_ep->next;
+ tmp_ep->next = virt_to_phys(ep_desc);
+ pool_idx++;
+ ASSERT(pool_idx <= urb_priv->intr_ep_pool_length);
}
+ i++;
+ }
+ tmp_ep = (struct USB_EP_Desc *)phys_to_virt(tmp_ep->next);
+ } while(tmp_ep != &TxIntrEPList[0]);
+ }
+
+ intr_dbg("Added SBs to intr epid %d: %s interval:%d (%d EP)\n", epid,
+ sblist_to_str(urb_priv->first_sb), urb_priv->interval, pool_idx);
+
+ /* We start the DMA sub channel without checking if it's running or not,
+ because:
+ 1) If it's already running, issuing the start command is a nop.
+ 2) We avoid a test-and-set race condition. */
+ *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start);
+}
+
+static void tc_dma_process_isoc_urb(struct urb *urb) {
+ unsigned long flags;
+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
+ int epid;
+
+ /* Do not disturb us while fiddling with EPs and epids */
+ local_irq_save(flags);
+
+ ASSERT(urb_priv);
+ ASSERT(urb_priv->first_sb);
+ epid = urb_priv->epid;
+
+ if(activeUrbList[epid] == NULL) {
+ /* EP is idle, so make this URB active */
+ activeUrbList[epid] = urb;
+ urb_list_del(urb, epid);
+ ASSERT(TxIsocEPList[epid].sub == 0);
+ ASSERT(!(TxIsocEPList[epid].command &
+ IO_STATE(USB_EP_command, enable, yes)));
+
+ /* Differentiate between In and Out Isoc. Because In SBs are not consumed*/
+ if(usb_pipein(urb->pipe)) {
+ /* Each EP for In Isoc will have only one SB descriptor, setup when
+ submitting the first active urb. We do it here by copying from URBs
+ pre-allocated SB. */
+ memcpy((void *)&(TxIsocSBList[epid]), urb_priv->first_sb,
+ sizeof(TxIsocSBList[epid]));
+ TxIsocEPList[epid].hw_len = 0;
+ TxIsocEPList[epid].sub = virt_to_phys(&(TxIsocSBList[epid]));
+ } else {
+ /* For Out Isoc we attach the pre-allocated list of SBs for the URB */
+ TxIsocEPList[epid].hw_len = 0;
+ TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
+
+ isoc_dbg("Attached first URB:0x%x[%d] to epid:%d first_sb:0x%x"
+ " last_sb::0x%x\n",
+ (unsigned int)urb, urb_priv->urb_num, epid,
+ (unsigned int)(urb_priv->first_sb),
+ (unsigned int)(urb_priv->last_sb));
+ }
+
+ if (urb->transfer_flags & URB_ISO_ASAP) {
+ /* The isoc transfer should be started as soon as possible. The
+ start_frame field is a return value if URB_ISO_ASAP was set. Comparing
+ R_USB_FM_NUMBER with a USB Chief trace shows that the first isoc IN
+ token is sent 2 frames later. I'm not sure how this affects usage of
+ the start_frame field by the device driver, or how it affects things
+ when USB_ISO_ASAP is not set, so therefore there's no compensation for
+ the 2 frame "lag" here. */
+ urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff);
+ TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
+ urb_priv->urb_state = STARTED;
+ isoc_dbg("URB_ISO_ASAP set, urb->start_frame set to %d\n",
+ urb->start_frame);
+ } else {
+ /* Not started yet. */
+ urb_priv->urb_state = NOT_STARTED;
+ isoc_warn("urb_priv->urb_state set to NOT_STARTED for URB:0x%x\n",
+ (unsigned int)urb);
+ }
+
+ } else {
+ /* An URB is already active on the EP. Leave URB in queue and let
+ finish_isoc_urb process it after current active URB */
+ ASSERT(TxIsocEPList[epid].sub != 0);
+
+ if(usb_pipein(urb->pipe)) {
+ /* Because there already is a active In URB on this epid we do nothing
+ and the finish_isoc_urb() function will handle switching to next URB*/
+
+ } else { /* For Out Isoc, insert new URBs traffic last in SB-list. */
+ struct USB_SB_Desc *temp_sb_desc;
+
+ /* Set state STARTED to all Out Isoc URBs added to SB list because we
+ don't know how many of them that are finished before descr interrupt*/
+ urb_priv->urb_state = STARTED;
+
+ /* Find end of current SB list by looking for SB with eol flag sat */
+ temp_sb_desc = phys_to_virt(TxIsocEPList[epid].sub);
+ while ((temp_sb_desc->command & IO_MASK(USB_SB_command, eol)) !=
+ IO_STATE(USB_SB_command, eol, yes)) {
+ ASSERT(temp_sb_desc->next);
+ temp_sb_desc = phys_to_virt(temp_sb_desc->next);
+ }
+
+ isoc_dbg("Appended URB:0x%x[%d] (first:0x%x last:0x%x) to epid:%d"
+ " sub:0x%x eol:0x%x\n",
+ (unsigned int)urb, urb_priv->urb_num,
+ (unsigned int)(urb_priv->first_sb),
+ (unsigned int)(urb_priv->last_sb), epid,
+ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub),
+ (unsigned int)temp_sb_desc);
+
+ /* Next pointer must be set before eol is removed. */
+ temp_sb_desc->next = virt_to_phys(urb_priv->first_sb);
+ /* Clear the previous end of list flag since there is a new in the
+ added SB descriptor list. */
+ temp_sb_desc->command &= ~IO_MASK(USB_SB_command, eol);
+
+ if (!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) {
+ __u32 epid_data;
+ /* 8.8.5 in Designer's Reference says we should check for and correct
+ any errors in the EP here. That should not be necessary if
+ epid_attn is handled correctly, so we assume all is ok. */
+ epid_data = etrax_epid_iso_get(epid);
+ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) !=
+ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
+ isoc_err("Disabled Isoc EP with error:%d on epid:%d when appending"
+ " URB:0x%x[%d]\n",
+ IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data), epid,
+ (unsigned int)urb, urb_priv->urb_num);
+ }
+
+ /* The SB list was exhausted. */
+ if (virt_to_phys(urb_priv->last_sb) != TxIsocEPList[epid].sub) {
+ /* The new sublist did not get processed before the EP was
+ disabled. Setup the EP again. */
+
+ if(virt_to_phys(temp_sb_desc) == TxIsocEPList[epid].sub) {
+ isoc_dbg("EP for epid:%d stoped at SB:0x%x before newly inserted"
+ ", restarting from this URBs SB:0x%x\n",
+ epid, (unsigned int)temp_sb_desc,
+ (unsigned int)(urb_priv->first_sb));
+ TxIsocEPList[epid].hw_len = 0;
+ TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
+ urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff);
+ /* Enable the EP again so data gets processed this time */
+ TxIsocEPList[epid].command |=
+ IO_STATE(USB_EP_command, enable, yes);
+
+ } else {
+ /* The EP has been disabled but not at end this URB (god knows
+ where). This should generate an epid_attn so we should not be
+ here */
+ isoc_warn("EP was disabled on sb:0x%x before SB list for"
+ " URB:0x%x[%d] got processed\n",
+ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub),
+ (unsigned int)urb, urb_priv->urb_num);
+ }
+ } else {
+ /* This might happend if we are slow on this function and isn't
+ an error. */
+ isoc_dbg("EP was disabled and finished with SBs from appended"
+ " URB:0x%x[%d]\n", (unsigned int)urb, urb_priv->urb_num);
+ }
+ }
+ }
+ }
+
+ /* Start the DMA sub channel */
+ *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start);
+
+ local_irq_restore(flags);
+}
+
+static void tc_dma_unlink_intr_urb(struct urb *urb) {
+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
+ volatile struct USB_EP_Desc *first_ep; /* First EP in the list. */
+ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */
+ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */
+ volatile struct USB_EP_Desc *unlink_ep; /* The one we should remove from
+ the list. */
+ int count = 0;
+ volatile int timeout = 10000;
+ int epid;
+
+ /* Read 8.8.4 in Designer's Reference, "Removing an EP Descriptor from the
+ List". */
+ ASSERT(urb_priv);
+ ASSERT(urb_priv->intr_ep_pool_length > 0);
+ epid = urb_priv->epid;
+
+ /* First disable all Intr EPs belonging to epid for this URB */
+ first_ep = &TxIntrEPList[0];
+ curr_ep = first_ep;
+ do {
+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next);
+ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) {
+ /* Disable EP */
+ next_ep->command &= ~IO_MASK(USB_EP_command, enable);
+ }
+ curr_ep = phys_to_virt(curr_ep->next);
+ } while (curr_ep != first_ep);
+
+
+ /* Now unlink all EPs belonging to this epid from Descr list */
+ first_ep = &TxIntrEPList[0];
+ curr_ep = first_ep;
+ do {
+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next);
+ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) {
+ /* This is the one we should unlink. */
+ unlink_ep = next_ep;
+
+ /* Actually unlink the EP from the DMA list. */
+ curr_ep->next = unlink_ep->next;
+
+ /* Wait until the DMA is no longer at this descriptor. */
+ while((*R_DMA_CH8_SUB2_EP == virt_to_phys(unlink_ep)) &&
+ (timeout-- > 0));
+ if(timeout == 0) {
+ warn("Timeout while waiting for DMA-TX-Intr to leave unlink EP\n");
+ }
+
+ count++;
+ }
+ curr_ep = phys_to_virt(curr_ep->next);
+ } while (curr_ep != first_ep);
+
+ if(count != urb_priv->intr_ep_pool_length) {
+ intr_warn("Unlinked %d of %d Intr EPs for URB:0x%x[%d]\n", count,
+ urb_priv->intr_ep_pool_length, (unsigned int)urb,
+ urb_priv->urb_num);
+ } else {
+ intr_dbg("Unlinked %d of %d interrupt EPs for URB:0x%x\n", count,
+ urb_priv->intr_ep_pool_length, (unsigned int)urb);
+ }
+}
+
+static void check_finished_bulk_tx_epids(struct usb_hcd *hcd,
+ int timer) {
+ unsigned long flags;
+ int epid;
+ struct urb *urb;
+ struct crisv10_urb_priv * urb_priv;
+ __u32 epid_data;
+
+ /* Protect TxEPList */
+ local_irq_save(flags);
+
+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
+ /* A finished EP descriptor is disabled and has a valid sub pointer */
+ if (!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) &&
+ (TxBulkEPList[epid].sub != 0)) {
+
+ /* Get the active URB for this epid */
+ urb = activeUrbList[epid];
+ /* Sanity checks */
+ ASSERT(urb);
+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
+ ASSERT(urb_priv);
+
+ /* Only handle finished out Bulk EPs here,
+ and let RX interrupt take care of the rest */
+ if(!epid_out_traffic(epid)) {
+ continue;
+ }
+
+ if(timer) {
+ tc_warn("Found finished %s Bulk epid:%d URB:0x%x[%d] from timeout\n",
+ epid_out_traffic(epid) ? "Out" : "In", epid, (unsigned int)urb,
+ urb_priv->urb_num);
+ } else {
+ tc_dbg("Found finished %s Bulk epid:%d URB:0x%x[%d] from interrupt\n",
+ epid_out_traffic(epid) ? "Out" : "In", epid, (unsigned int)urb,
+ urb_priv->urb_num);
+ }
+
+ if(urb_priv->urb_state == UNLINK) {
+ /* This Bulk URB is requested to be unlinked, that means that the EP
+ has been disabled and we might not have sent all data */
+ tc_finish_urb(hcd, urb, urb->status);
+ continue;
+ }
+
+ ASSERT(urb_priv->urb_state == STARTED);
+ if (phys_to_virt(TxBulkEPList[epid].sub) != urb_priv->last_sb) {
+ tc_err("Endpoint got disabled before reaching last sb\n");
+ }
+
+ epid_data = etrax_epid_get(epid);
+ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) ==
+ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
+ /* This means that the endpoint has no error, is disabled
+ and had inserted traffic, i.e. transfer successfully completed. */
+ tc_finish_urb(hcd, urb, 0);
+ } else {
+ /* Shouldn't happen. We expect errors to be caught by epid
+ attention. */
+ tc_err("Found disabled bulk EP desc (epid:%d error:%d)\n",
+ epid, IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data));
+ }
+ } else {
+ tc_dbg("Ignoring In Bulk epid:%d, let RX interrupt handle it\n", epid);
+ }
+ }
+
+ local_irq_restore(flags);
+}
+
+static void check_finished_ctrl_tx_epids(struct usb_hcd *hcd) {
+ unsigned long flags;
+ int epid;
+ struct urb *urb;
+ struct crisv10_urb_priv * urb_priv;
+ __u32 epid_data;
+
+ /* Protect TxEPList */
+ local_irq_save(flags);
+
+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
+ if(epid == DUMMY_EPID)
+ continue;
+
+ /* A finished EP descriptor is disabled and has a valid sub pointer */
+ if (!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) &&
+ (TxCtrlEPList[epid].sub != 0)) {
+
+ /* Get the active URB for this epid */
+ urb = activeUrbList[epid];
+
+ if(urb == NULL) {
+ tc_warn("Found finished Ctrl epid:%d with no active URB\n", epid);
+ continue;
+ }
+
+ /* Sanity checks */
+ ASSERT(usb_pipein(urb->pipe));
+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
+ ASSERT(urb_priv);
+ if (phys_to_virt(TxCtrlEPList[epid].sub) != urb_priv->last_sb) {
+ tc_err("Endpoint got disabled before reaching last sb\n");
+ }
+
+ epid_data = etrax_epid_get(epid);
+ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) ==
+ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
+ /* This means that the endpoint has no error, is disabled
+ and had inserted traffic, i.e. transfer successfully completed. */
+
+ /* Check if RX-interrupt for In Ctrl has been processed before
+ finishing the URB */
+ if(urb_priv->ctrl_rx_done) {
+ tc_dbg("Finishing In Ctrl URB:0x%x[%d] in tx_interrupt\n",
+ (unsigned int)urb, urb_priv->urb_num);
+ tc_finish_urb(hcd, urb, 0);
+ } else {
+ /* If we get zout descriptor interrupt before RX was done for a
+ In Ctrl transfer, then we flag that and it will be finished
+ in the RX-Interrupt */
+ urb_priv->ctrl_zout_done = 1;
+ tc_dbg("Got zout descr interrupt before RX interrupt\n");
+ }
+ } else {
+ /* Shouldn't happen. We expect errors to be caught by epid
+ attention. */
+ tc_err("Found disabled Ctrl EP desc (epid:%d URB:0x%x[%d]) error_code:%d\n", epid, (unsigned int)urb, urb_priv->urb_num, IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data));
+ __dump_ep_desc(&(TxCtrlEPList[epid]));
+ __dump_ept_data(epid);
+ }
+ }
+ }
+ local_irq_restore(flags);
+}
+
+/* This function goes through all epids that are setup for Out Isoc transfers
+ and marks (isoc_out_done) all queued URBs that the DMA has finished
+ transfer for.
+ No URB completetion is done here to make interrupt routine return quickly.
+ URBs are completed later with help of complete_isoc_bottom_half() that
+ becomes schedules when this functions is finished. */
+static void check_finished_isoc_tx_epids(void) {
+ unsigned long flags;
+ int epid;
+ struct urb *urb;
+ struct crisv10_urb_priv * urb_priv;
+ struct USB_SB_Desc* sb_desc;
+ int epid_done;
+
+ /* Protect TxIsocEPList */
+ local_irq_save(flags);
+
+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
+ if (TxIsocEPList[epid].sub == 0 || epid == INVALID_EPID ||
+ !epid_out_traffic(epid)) {
+ /* Nothing here to see. */
+ continue;
+ }
+ ASSERT(epid_inuse(epid));
+ ASSERT(epid_isoc(epid));
+
+ sb_desc = phys_to_virt(TxIsocEPList[epid].sub);
+ /* Find the last descriptor of the currently active URB for this ep.
+ This is the first descriptor in the sub list marked for a descriptor
+ interrupt. */
+ while (sb_desc && !IO_EXTRACT(USB_SB_command, intr, sb_desc->command)) {
+ sb_desc = sb_desc->next ? phys_to_virt(sb_desc->next) : 0;
+ }
+ ASSERT(sb_desc);
+
+ isoc_dbg("Descr IRQ checking epid:%d sub:0x%x intr:0x%x\n",
+ epid, (unsigned int)phys_to_virt(TxIsocEPList[epid].sub),
+ (unsigned int)sb_desc);
+
+ urb = activeUrbList[epid];
+ if(urb == NULL) {
+ isoc_err("Isoc Descr irq on epid:%d with no active URB\n", epid);
+ continue;
+ }
+
+ epid_done = 0;
+ while(urb && !epid_done) {
+ /* Sanity check. */
+ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
+ ASSERT(usb_pipeout(urb->pipe));
+
+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
+ ASSERT(urb_priv);
+ ASSERT(urb_priv->urb_state == STARTED ||
+ urb_priv->urb_state == UNLINK);
+
+ if (sb_desc != urb_priv->last_sb) {
+ /* This urb has been sent. */
+ urb_priv->isoc_out_done = 1;
+
+ } else { /* Found URB that has last_sb as the interrupt reason */
+
+ /* Check if EP has been disabled, meaning that all transfers are done*/
+ if(!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) {
+ ASSERT((sb_desc->command & IO_MASK(USB_SB_command, eol)) ==
+ IO_STATE(USB_SB_command, eol, yes));
+ ASSERT(sb_desc->next == 0);
+ urb_priv->isoc_out_done = 1;
+ } else {
+ isoc_dbg("Skipping URB:0x%x[%d] because EP not disabled yet\n",
+ (unsigned int)urb, urb_priv->urb_num);
+ }
+ /* Stop looking any further in queue */
+ epid_done = 1;
+ }
+
+ if (!epid_done) {
+ if(urb == activeUrbList[epid]) {
+ urb = urb_list_first(epid);
+ } else {
+ urb = urb_list_next(urb, epid);
+ }
+ }
+ } /* END: while(urb && !epid_done) */
+ }
+
+ local_irq_restore(flags);
+}
+
+
+/* This is where the Out Isoc URBs are realy completed. This function is
+ scheduled from tc_dma_tx_interrupt() when one or more Out Isoc transfers
+ are done. This functions completes all URBs earlier marked with
+ isoc_out_done by fast interrupt routine check_finished_isoc_tx_epids() */
+
+static void complete_isoc_bottom_half(void *data) {
+ struct crisv10_isoc_complete_data *comp_data;
+ struct usb_iso_packet_descriptor *packet;
+ struct crisv10_urb_priv * urb_priv;
+ unsigned long flags;
+ struct urb* urb;
+ int epid_done;
+ int epid;
+ int i;
+
+ comp_data = (struct crisv10_isoc_complete_data*)data;
+
+ local_irq_save(flags);
+
+ for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
+ if(!epid_inuse(epid) || !epid_isoc(epid) || !epid_out_traffic(epid) || epid == DUMMY_EPID) {
+ /* Only check valid Out Isoc epids */
+ continue;
+ }
+
+ isoc_dbg("Isoc bottom-half checking epid:%d, sub:0x%x\n", epid,
+ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub));
+
+ /* The descriptor interrupt handler has marked all transmitted Out Isoc
+ URBs with isoc_out_done. Now we traverse all epids and for all that
+ have out Isoc traffic we traverse its URB list and complete the
+ transmitted URBs. */
+ epid_done = 0;
+ while (!epid_done) {
+
+ /* Get the active urb (if any) */
+ urb = activeUrbList[epid];
+ if (urb == 0) {
+ isoc_dbg("No active URB on epid:%d anymore\n", epid);
+ epid_done = 1;
+ continue;
+ }
+
+ /* Sanity check. */
+ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
+ ASSERT(usb_pipeout(urb->pipe));
+
+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
+ ASSERT(urb_priv);
+
+ if (!(urb_priv->isoc_out_done)) {
+ /* We have reached URB that isn't flaged done yet, stop traversing. */
+ isoc_dbg("Stoped traversing Out Isoc URBs on epid:%d"
+ " before not yet flaged URB:0x%x[%d]\n",
+ epid, (unsigned int)urb, urb_priv->urb_num);
+ epid_done = 1;
+ continue;
+ }
+
+ /* This urb has been sent. */
+ isoc_dbg("Found URB:0x%x[%d] that is flaged isoc_out_done\n",
+ (unsigned int)urb, urb_priv->urb_num);
+
+ /* Set ok on transfered packets for this URB and finish it */
+ for (i = 0; i < urb->number_of_packets; i++) {
+ packet = &urb->iso_frame_desc[i];
+ packet->status = 0;
+ packet->actual_length = packet->length;
+ }
+ urb_priv->isoc_packet_counter = urb->number_of_packets;
+ tc_finish_urb(comp_data->hcd, urb, 0);
+
+ } /* END: while(!epid_done) */
+ } /* END: for(epid...) */
+
+ local_irq_restore(flags);
+ kmem_cache_free(isoc_compl_cache, comp_data);
+}
+
+
+static void check_finished_intr_tx_epids(struct usb_hcd *hcd) {
+ unsigned long flags;
+ int epid;
+ struct urb *urb;
+ struct crisv10_urb_priv * urb_priv;
+ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */
+ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */
+
+ /* Protect TxintrEPList */
+ local_irq_save(flags);
+
+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
+ if(!epid_inuse(epid) || !epid_intr(epid) || !epid_out_traffic(epid)) {
+ /* Nothing to see on this epid. Only check valid Out Intr epids */
+ continue;
+ }
+
+ urb = activeUrbList[epid];
+ if(urb == 0) {
+ intr_warn("Found Out Intr epid:%d with no active URB\n", epid);
+ continue;
+ }
+
+ /* Sanity check. */
+ ASSERT(usb_pipetype(urb->pipe) == PIPE_INTERRUPT);
+ ASSERT(usb_pipeout(urb->pipe));
+
+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
+ ASSERT(urb_priv);
+
+ /* Go through EPs between first and second sof-EP. It's here Out Intr EPs
+ are inserted.*/
+ curr_ep = &TxIntrEPList[0];
+ do {
+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next);
+ if(next_ep == urb_priv->intr_ep_pool[0]) {
+ /* We found the Out Intr EP for this epid */
+
+ /* Disable it so it doesn't get processed again */
+ next_ep->command &= ~IO_MASK(USB_EP_command, enable);
+
+ /* Finish the active Out Intr URB with status OK */
+ tc_finish_urb(hcd, urb, 0);
+ }
+ curr_ep = phys_to_virt(curr_ep->next);
+ } while (curr_ep != &TxIntrEPList[1]);
+
+ }
+ local_irq_restore(flags);
+}
+
+/* Interrupt handler for DMA8/IRQ24 with subchannels (called from hardware intr) */
+static irqreturn_t tc_dma_tx_interrupt(int irq, void *vhc) {
+ struct usb_hcd *hcd = (struct usb_hcd*)vhc;
+ ASSERT(hcd);
+
+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub0_descr)) {
+ /* Clear this interrupt */
+ *R_DMA_CH8_SUB0_CLR_INTR = IO_STATE(R_DMA_CH8_SUB0_CLR_INTR, clr_descr, do);
+ restart_dma8_sub0();
+ }
+
+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub1_descr)) {
+ /* Clear this interrupt */
+ *R_DMA_CH8_SUB1_CLR_INTR = IO_STATE(R_DMA_CH8_SUB1_CLR_INTR, clr_descr, do);
+ check_finished_ctrl_tx_epids(hcd);
+ }
+
+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub2_descr)) {
+ /* Clear this interrupt */
+ *R_DMA_CH8_SUB2_CLR_INTR = IO_STATE(R_DMA_CH8_SUB2_CLR_INTR, clr_descr, do);
+ check_finished_intr_tx_epids(hcd);
+ }
+
+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub3_descr)) {
+ struct crisv10_isoc_complete_data* comp_data;
+
+ /* Flag done Out Isoc for later completion */
+ check_finished_isoc_tx_epids();
+
+ /* Clear this interrupt */
+ *R_DMA_CH8_SUB3_CLR_INTR = IO_STATE(R_DMA_CH8_SUB3_CLR_INTR, clr_descr, do);
+ /* Schedule bottom half of Out Isoc completion function. This function
+ finishes the URBs marked with isoc_out_done */
+ comp_data = (struct crisv10_isoc_complete_data*)
+ kmem_cache_alloc(isoc_compl_cache, SLAB_ATOMIC);
+ ASSERT(comp_data != NULL);
+ comp_data ->hcd = hcd;
+
+ INIT_WORK(&comp_data->usb_bh, complete_isoc_bottom_half, comp_data);
+ schedule_work(&comp_data->usb_bh);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/* Interrupt handler for DMA9/IRQ25 (called from hardware intr) */
+static irqreturn_t tc_dma_rx_interrupt(int irq, void *vhc) {
+ unsigned long flags;
+ struct urb *urb;
+ struct usb_hcd *hcd = (struct usb_hcd*)vhc;
+ struct crisv10_urb_priv *urb_priv;
+ int epid = 0;
+ int real_error;
+
+ ASSERT(hcd);
+
+ /* Clear this interrupt. */
+ *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do);
+
+ /* Custom clear interrupt for this interrupt */
+ /* The reason we cli here is that we call the driver's callback functions. */
+ local_irq_save(flags);
+
+ /* Note that this while loop assumes that all packets span only
+ one rx descriptor. */
+ while(myNextRxDesc->status & IO_MASK(USB_IN_status, eop)) {
+ epid = IO_EXTRACT(USB_IN_status, epid, myNextRxDesc->status);
+ /* Get the active URB for this epid */
+ urb = activeUrbList[epid];
+
+ ASSERT(epid_inuse(epid));
+ if (!urb) {
+ dma_err("No urb for epid %d in rx interrupt\n", epid);
+ goto skip_out;
+ }
+
+ /* Check if any errors on epid */
+ real_error = 0;
+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, error)) {
+ __u32 r_usb_ept_data;
+
+ if (usb_pipeisoc(urb->pipe)) {
+ r_usb_ept_data = etrax_epid_iso_get(epid);
+ if((r_usb_ept_data & IO_MASK(R_USB_EPT_DATA_ISO, valid)) &&
+ (IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data) == 0) &&
+ (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata))) {
+ /* Not an error, just a failure to receive an expected iso
+ in packet in this frame. This is not documented
+ in the designers reference. Continue processing.
+ */
+ } else real_error = 1;
+ } else real_error = 1;
+ }
+
+ if(real_error) {
+ dma_err("Error in RX descr on epid:%d for URB 0x%x",
+ epid, (unsigned int)urb);
+ dump_ept_data(epid);
+ dump_in_desc(myNextRxDesc);
+ goto skip_out;
+ }
+
+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
+ ASSERT(urb_priv);
+ ASSERT(urb_priv->urb_state == STARTED ||
+ urb_priv->urb_state == UNLINK);
+
+ if ((usb_pipetype(urb->pipe) == PIPE_BULK) ||
+ (usb_pipetype(urb->pipe) == PIPE_CONTROL) ||
+ (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) {
+
+ /* We get nodata for empty data transactions, and the rx descriptor's
+ hw_len field is not valid in that case. No data to copy in other
+ words. */
+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) {
+ /* No data to copy */
+ } else {
+ /*
+ dma_dbg("Processing RX for URB:0x%x epid:%d (data:%d ofs:%d)\n",
+ (unsigned int)urb, epid, myNextRxDesc->hw_len,
+ urb_priv->rx_offset);
+ */
+ /* Only copy data if URB isn't flaged to be unlinked*/
+ if(urb_priv->urb_state != UNLINK) {
+ /* Make sure the data fits in the buffer. */
+ if(urb_priv->rx_offset + myNextRxDesc->hw_len
+ <= urb->transfer_buffer_length) {
+
+ /* Copy the data to URBs buffer */
+ memcpy(urb->transfer_buffer + urb_priv->rx_offset,
+ phys_to_virt(myNextRxDesc->buf), myNextRxDesc->hw_len);
+ urb_priv->rx_offset += myNextRxDesc->hw_len;
+ } else {
+ /* Signal overflow when returning URB */
+ urb->status = -EOVERFLOW;
+ tc_finish_urb_later(hcd, urb, urb->status);
+ }
+ }
+ }
+
+ /* Check if it was the last packet in the transfer */
+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, eot)) {
+ /* Special handling for In Ctrl URBs. */
+ if(usb_pipecontrol(urb->pipe) && usb_pipein(urb->pipe) &&
+ !(urb_priv->ctrl_zout_done)) {
+ /* Flag that RX part of Ctrl transfer is done. Because zout descr
+ interrupt hasn't happend yet will the URB be finished in the
+ TX-Interrupt. */
+ urb_priv->ctrl_rx_done = 1;
+ tc_dbg("Not finishing In Ctrl URB:0x%x from rx_interrupt, waiting"
+ " for zout\n", (unsigned int)urb);
+ } else {
+ tc_finish_urb(hcd, urb, 0);
+ }
+ }
+ } else { /* ISOC RX */
+ /*
+ isoc_dbg("Processing RX for epid:%d (URB:0x%x) ISOC pipe\n",
+ epid, (unsigned int)urb);
+ */
+
+ struct usb_iso_packet_descriptor *packet;
+
+ if (urb_priv->urb_state == UNLINK) {
+ isoc_warn("Ignoring Isoc Rx data for urb being unlinked.\n");
+ goto skip_out;
+ } else if (urb_priv->urb_state == NOT_STARTED) {
+ isoc_err("What? Got Rx data for Isoc urb that isn't started?\n");
+ goto skip_out;
+ }
+
+ packet = &urb->iso_frame_desc[urb_priv->isoc_packet_counter];
+ ASSERT(packet);
+ packet->status = 0;
+
+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) {
+ /* We get nodata for empty data transactions, and the rx descriptor's
+ hw_len field is not valid in that case. We copy 0 bytes however to
+ stay in synch. */
+ packet->actual_length = 0;
+ } else {
+ packet->actual_length = myNextRxDesc->hw_len;
+ /* Make sure the data fits in the buffer. */
+ ASSERT(packet->actual_length <= packet->length);
+ memcpy(urb->transfer_buffer + packet->offset,
+ phys_to_virt(myNextRxDesc->buf), packet->actual_length);
+ if(packet->actual_length > 0)
+ isoc_dbg("Copied %d bytes, packet %d for URB:0x%x[%d]\n",
+ packet->actual_length, urb_priv->isoc_packet_counter,
+ (unsigned int)urb, urb_priv->urb_num);
+ }
+
+ /* Increment the packet counter. */
+ urb_priv->isoc_packet_counter++;
+
+ /* Note that we don't care about the eot field in the rx descriptor's
+ status. It will always be set for isoc traffic. */
+ if (urb->number_of_packets == urb_priv->isoc_packet_counter) {
+ /* Complete the urb with status OK. */
+ tc_finish_urb(hcd, urb, 0);
+ }
+ }
+
+ skip_out:
+ myNextRxDesc->status = 0;
+ myNextRxDesc->command |= IO_MASK(USB_IN_command, eol);
+ myLastRxDesc->command &= ~IO_MASK(USB_IN_command, eol);
+ myLastRxDesc = myNextRxDesc;
+ myNextRxDesc = phys_to_virt(myNextRxDesc->next);
+ flush_etrax_cache();
+ *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, restart);
+ }
+
+ local_irq_restore(flags);
+
+ return IRQ_HANDLED;
+}
+
+static void tc_bulk_start_timer_func(unsigned long dummy) {
+ /* We might enable an EP descriptor behind the current DMA position when
+ it's about to decide that there are no more bulk traffic and it should
+ stop the bulk channel.
+ Therefore we periodically check if the bulk channel is stopped and there
+ is an enabled bulk EP descriptor, in which case we start the bulk
+ channel. */
+
+ if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) {
+ int epid;
+
+ timer_dbg("bulk_start_timer: Bulk DMA channel not running.\n");
+
+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
+ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
+ timer_warn("Found enabled EP for epid %d, starting bulk channel.\n",
+ epid);
+ restart_dma8_sub0();
+
+ /* Restart the bulk eot timer since we just started the bulk channel.*/
+ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
+
+ /* No need to search any further. */
+ break;
+ }
+ }
+ } else {
+ timer_dbg("bulk_start_timer: Bulk DMA channel running.\n");
+ }
+}
+
+static void tc_bulk_eot_timer_func(unsigned long dummy) {
+ struct usb_hcd *hcd = (struct usb_hcd*)dummy;
+ ASSERT(hcd);
+ /* Because of a race condition in the top half, we might miss a bulk eot.
+ This timer "simulates" a bulk eot if we don't get one for a while,
+ hopefully correcting the situation. */
+ timer_dbg("bulk_eot_timer timed out.\n");
+ check_finished_bulk_tx_epids(hcd, 1);
+}
+
+
+/*************************************************************/
+/*************************************************************/
+/* Device driver block */
+/*************************************************************/
+/*************************************************************/
+
+/* Forward declarations for device driver functions */
+static int devdrv_hcd_probe(struct device *);
+static int devdrv_hcd_remove(struct device *);
+#ifdef CONFIG_PM
+static int devdrv_hcd_suspend(struct device *, u32, u32);
+static int devdrv_hcd_resume(struct device *, u32);
+#endif /* CONFIG_PM */
+
+/* the device */
+static struct platform_device *devdrv_hc_platform_device;
+
+/* device driver interface */
+static struct device_driver devdrv_hc_device_driver = {
+ .name = (char *) hc_name,
+ .bus = &platform_bus_type,
+
+ .probe = devdrv_hcd_probe,
+ .remove = devdrv_hcd_remove,
+
+#ifdef CONFIG_PM
+ .suspend = devdrv_hcd_suspend,
+ .resume = devdrv_hcd_resume,
+#endif /* CONFIG_PM */
+};
- CHECK_ALIGN(&TxIsocEPList[i]);
- TxIsocEPList[i].hw_len = 0;
-
- /* Must enable the last EP descr to get eof interrupt. */
- TxIsocEPList[i].command = (IO_STATE(USB_EP_command, enable, yes) |
- IO_STATE(USB_EP_command, eof, yes) |
- IO_STATE(USB_EP_command, eol, yes) |
- IO_FIELD(USB_EP_command, epid, INVALID_EPID));
- TxIsocEPList[i].sub = virt_to_phys(&TxIsocSB_zout);
- TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[0]);
-
- *R_DMA_CH8_SUB3_EP = virt_to_phys(&TxIsocEPList[0]);
- *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start);
-
- DBFEXIT;
-}
-
-static void etrax_usb_unlink_intr_urb(struct urb *urb)
+/* initialize the host controller and driver */
+static int __init_or_module devdrv_hcd_probe(struct device *dev)
{
- volatile USB_EP_Desc_t *first_ep; /* First EP in the list. */
- volatile USB_EP_Desc_t *curr_ep; /* Current EP, the iterator. */
- volatile USB_EP_Desc_t *next_ep; /* The EP after current. */
- volatile USB_EP_Desc_t *unlink_ep; /* The one we should remove from the list. */
-
- int epid;
-
- /* Read 8.8.4 in Designer's Reference, "Removing an EP Descriptor from the List". */
-
- DBFENTER;
-
- epid = ((etrax_urb_priv_t *)urb->hcpriv)->epid;
-
- first_ep = &TxIntrEPList[0];
- curr_ep = first_ep;
-
-
- /* Note that this loop removes all EP descriptors with this epid. This assumes
- that all EP descriptors belong to the one and only urb for this epid. */
-
- do {
- next_ep = (USB_EP_Desc_t *)phys_to_virt(curr_ep->next);
-
- if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) {
-
- dbg_intr("Found EP to unlink for epid %d", epid);
-
- /* This is the one we should unlink. */
- unlink_ep = next_ep;
-
- /* Actually unlink the EP from the DMA list. */
- curr_ep->next = unlink_ep->next;
-
- /* Wait until the DMA is no longer at this descriptor. */
- while (*R_DMA_CH8_SUB2_EP == virt_to_phys(unlink_ep));
+ struct usb_hcd *hcd;
+ struct crisv10_hcd *crisv10_hcd;
+ int retval;
+
+ /* Check DMA burst length */
+ if(IO_EXTRACT(R_BUS_CONFIG, dma_burst, *R_BUS_CONFIG) !=
+ IO_STATE(R_BUS_CONFIG, dma_burst, burst32)) {
+ devdrv_err("Invalid DMA burst length in Etrax 100LX,"
+ " needs to be 32\n");
+ return -EPERM;
+ }
+
+ hcd = usb_create_hcd(&crisv10_hc_driver, dev, dev->bus_id);
+ if (!hcd)
+ return -ENOMEM;
+
+ crisv10_hcd = hcd_to_crisv10_hcd(hcd);
+ spin_lock_init(&crisv10_hcd->lock);
+ crisv10_hcd->num_ports = num_ports();
+ crisv10_hcd->running = 0;
+
+ dev_set_drvdata(dev, crisv10_hcd);
+
+ devdrv_dbg("ETRAX USB IRQs HC:%d RX:%d TX:%d\n", ETRAX_USB_HC_IRQ,
+ ETRAX_USB_RX_IRQ, ETRAX_USB_TX_IRQ);
+
+ /* Print out chip version read from registers */
+ int rev_maj = *R_USB_REVISION & IO_MASK(R_USB_REVISION, major);
+ int rev_min = *R_USB_REVISION & IO_MASK(R_USB_REVISION, minor);
+ if(rev_min == 0) {
+ devdrv_info("Etrax 100LX USB Revision %d v1,2\n", rev_maj);
+ } else {
+ devdrv_info("Etrax 100LX USB Revision %d v%d\n", rev_maj, rev_min);
+ }
+
+ devdrv_info("Bulk timer interval, start:%d eot:%d\n",
+ BULK_START_TIMER_INTERVAL,
+ BULK_EOT_TIMER_INTERVAL);
+
+
+ /* Init root hub data structures */
+ if(rh_init()) {
+ devdrv_err("Failed init data for Root Hub\n");
+ retval = -ENOMEM;
+ }
+
+ if(port_in_use(0)) {
+ if (cris_request_io_interface(if_usb_1, "ETRAX100LX USB-HCD")) {
+ printk(KERN_CRIT "usb-host: request IO interface usb1 failed");
+ retval = -EBUSY;
+ goto out;
+ }
+ devdrv_info("Claimed interface for USB physical port 1\n");
+ }
+ if(port_in_use(1)) {
+ if (cris_request_io_interface(if_usb_2, "ETRAX100LX USB-HCD")) {
+ /* Free first interface if second failed to be claimed */
+ if(port_in_use(0)) {
+ cris_free_io_interface(if_usb_1);
+ }
+ printk(KERN_CRIT "usb-host: request IO interface usb2 failed");
+ retval = -EBUSY;
+ goto out;
+ }
+ devdrv_info("Claimed interface for USB physical port 2\n");
+ }
+
+ /* Init transfer controller structs and locks */
+ if((retval = tc_init(hcd)) != 0) {
+ goto out;
+ }
+
+ /* Attach interrupt functions for DMA and init DMA controller */
+ if((retval = tc_dma_init(hcd)) != 0) {
+ goto out;
+ }
+
+ /* Attach the top IRQ handler for USB controller interrupts */
+ if (request_irq(ETRAX_USB_HC_IRQ, crisv10_hcd_top_irq, 0,
+ "ETRAX 100LX built-in USB (HC)", hcd)) {
+ err("Could not allocate IRQ %d for USB", ETRAX_USB_HC_IRQ);
+ retval = -EBUSY;
+ goto out;
+ }
+
+ /* iso_eof is only enabled when isoc traffic is running. */
+ *R_USB_IRQ_MASK_SET =
+ /* IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set) | */
+ IO_STATE(R_USB_IRQ_MASK_SET, bulk_eot, set) |
+ IO_STATE(R_USB_IRQ_MASK_SET, epid_attn, set) |
+ IO_STATE(R_USB_IRQ_MASK_SET, port_status, set) |
+ IO_STATE(R_USB_IRQ_MASK_SET, ctl_status, set);
+
+
+ crisv10_ready_wait();
+ /* Reset the USB interface. */
+ *R_USB_COMMAND =
+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
+ IO_STATE(R_USB_COMMAND, ctrl_cmd, reset);
+
+ /* Designer's Reference, p. 8 - 10 says we should Initate R_USB_FM_PSTART to
+ 0x2A30 (10800), to guarantee that control traffic gets 10% of the
+ bandwidth, and periodic transfer may allocate the rest (90%).
+ This doesn't work though.
+ The value 11960 is chosen to be just after the SOF token, with a couple
+ of bit times extra for possible bit stuffing. */
+ *R_USB_FM_PSTART = IO_FIELD(R_USB_FM_PSTART, value, 11960);
+
+ crisv10_ready_wait();
+ /* Configure the USB interface as a host controller. */
+ *R_USB_COMMAND =
+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_config);
+
+
+ /* Check so controller not busy before enabling ports */
+ crisv10_ready_wait();
+
+ /* Enable selected USB ports */
+ if(port_in_use(0)) {
+ *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no);
+ } else {
+ *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, yes);
+ }
+ if(port_in_use(1)) {
+ *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no);
+ } else {
+ *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, yes);
+ }
+
+ crisv10_ready_wait();
+ /* Start processing of USB traffic. */
+ *R_USB_COMMAND =
+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
+
+ /* Do not continue probing initialization before USB interface is done */
+ crisv10_ready_wait();
+
+ /* Register our Host Controller to USB Core
+ * Finish the remaining parts of generic HCD initialization: allocate the
+ * buffers of consistent memory, register the bus
+ * and call the driver's reset() and start() routines. */
+ retval = usb_add_hcd(hcd, ETRAX_USB_HC_IRQ, IRQF_DISABLED);
+ if (retval != 0) {
+ devdrv_err("Failed registering HCD driver\n");
+ goto out;
+ }
+
+ return 0;
+
+ out:
+ devdrv_hcd_remove(dev);
+ return retval;
+}
+
+
+/* cleanup after the host controller and driver */
+static int __init_or_module devdrv_hcd_remove(struct device *dev)
+{
+ struct crisv10_hcd *crisv10_hcd = dev_get_drvdata(dev);
+ struct usb_hcd *hcd;
+
+ if (!crisv10_hcd)
+ return 0;
+ hcd = crisv10_hcd_to_hcd(crisv10_hcd);
+
+
+ /* Stop USB Controller in Etrax 100LX */
+ crisv10_hcd_reset(hcd);
+
+ usb_remove_hcd(hcd);
+ devdrv_dbg("Removed HCD from USB Core\n");
+
+ /* Free USB Controller IRQ */
+ free_irq(ETRAX_USB_HC_IRQ, NULL);
+
+ /* Free resources */
+ tc_dma_destroy();
+ tc_destroy();
+
+
+ if(port_in_use(0)) {
+ cris_free_io_interface(if_usb_1);
+ }
+ if(port_in_use(1)) {
+ cris_free_io_interface(if_usb_2);
+ }
+
+ devdrv_dbg("Freed all claimed resources\n");
+
+ return 0;
+}
+
+
+#ifdef CONFIG_PM
+
+static int devdrv_hcd_suspend(struct usb_hcd *hcd, u32 state, u32 level)
+{
+ return 0; /* no-op for now */
+}
+
+static int devdrv_hcd_resume(struct usb_hcd *hcd, u32 level)
+{
+ return 0; /* no-op for now */
+}
+
+#endif /* CONFIG_PM */
+
+
+
+/*************************************************************/
+/*************************************************************/
+/* Module block */
+/*************************************************************/
+/*************************************************************/
+
+/* register driver */
+static int __init module_hcd_init(void)
+{
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ /* Here we select enabled ports by following defines created from
+ menuconfig */
+#ifndef CONFIG_ETRAX_USB_HOST_PORT1
+ ports &= ~(1<<0);
+#endif
+#ifndef CONFIG_ETRAX_USB_HOST_PORT2
+ ports &= ~(1<<1);
+#endif
- /* Now we are free to remove it and its SB descriptor.
- Note that it is assumed here that there is only one sb in the
- sb list for this ep. */
- kmem_cache_free(usb_desc_cache, phys_to_virt(unlink_ep->sub));
- kmem_cache_free(usb_desc_cache, (USB_EP_Desc_t *)unlink_ep);
- }
+ printk(KERN_INFO "%s version "VERSION" "COPYRIGHT"\n", product_desc);
- curr_ep = phys_to_virt(curr_ep->next);
+ devdrv_hc_platform_device =
+ platform_device_register_simple((char *) hc_name, 0, NULL, 0);
- } while (curr_ep != first_ep);
- urb->hcpriv = NULL;
+ if (IS_ERR(devdrv_hc_platform_device))
+ return PTR_ERR(devdrv_hc_platform_device);
+ return driver_register(&devdrv_hc_device_driver);
+ /*
+ * Note that we do not set the DMA mask for the device,
+ * i.e. we pretend that we will use PIO, since no specific
+ * allocation routines are needed for DMA buffers. This will
+ * cause the HCD buffer allocation routines to fall back to
+ * kmalloc().
+ */
}
-void etrax_usb_do_intr_recover(int epid)
-{
- USB_EP_Desc_t *first_ep, *tmp_ep;
+/* unregister driver */
+static void __exit module_hcd_exit(void)
+{
+ driver_unregister(&devdrv_hc_device_driver);
+}
- DBFENTER;
-
- first_ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB2_EP);
- tmp_ep = first_ep;
-
- /* What this does is simply to walk the list of interrupt
- ep descriptors and enable those that are disabled. */
-
- do {
- if (IO_EXTRACT(USB_EP_command, epid, tmp_ep->command) == epid &&
- !(tmp_ep->command & IO_MASK(USB_EP_command, enable))) {
- tmp_ep->command |= IO_STATE(USB_EP_command, enable, yes);
- }
-
- tmp_ep = (USB_EP_Desc_t *)phys_to_virt(tmp_ep->next);
-
- } while (tmp_ep != first_ep);
-
-
- DBFEXIT;
-}
-
-static int etrax_rh_unlink_urb (struct urb *urb)
-{
- etrax_hc_t *hc;
-
- DBFENTER;
-
- hc = urb->dev->bus->hcpriv;
-
- if (hc->rh.urb == urb) {
- hc->rh.send = 0;
- del_timer(&hc->rh.rh_int_timer);
- }
-
- DBFEXIT;
- return 0;
-}
-
-static void etrax_rh_send_irq(struct urb *urb)
-{
- __u16 data = 0;
- etrax_hc_t *hc = urb->dev->bus->hcpriv;
- DBFENTER;
-
-/*
- dbg_rh("R_USB_FM_NUMBER : 0x%08X", *R_USB_FM_NUMBER);
- dbg_rh("R_USB_FM_REMAINING: 0x%08X", *R_USB_FM_REMAINING);
-*/
-
- data |= (hc->rh.wPortChange_1) ? (1 << 1) : 0;
- data |= (hc->rh.wPortChange_2) ? (1 << 2) : 0;
-
- *((__u16 *)urb->transfer_buffer) = cpu_to_le16(data);
- /* FIXME: Why is actual_length set to 1 when data is 2 bytes?
- Since only 1 byte is used, why not declare data as __u8? */
- urb->actual_length = 1;
- urb->status = 0;
-
- if (hc->rh.send && urb->complete) {
- dbg_rh("wPortChange_1: 0x%04X", hc->rh.wPortChange_1);
- dbg_rh("wPortChange_2: 0x%04X", hc->rh.wPortChange_2);
-
- urb->complete(urb, NULL);
- }
-
- DBFEXIT;
-}
-
-static void etrax_rh_init_int_timer(struct urb *urb)
-{
- etrax_hc_t *hc;
-
- DBFENTER;
-
- hc = urb->dev->bus->hcpriv;
- hc->rh.interval = urb->interval;
- init_timer(&hc->rh.rh_int_timer);
- hc->rh.rh_int_timer.function = etrax_rh_int_timer_do;
- hc->rh.rh_int_timer.data = (unsigned long)urb;
- /* FIXME: Is the jiffies resolution enough? All intervals < 10 ms will be mapped
- to 0, and the rest to the nearest lower 10 ms. */
- hc->rh.rh_int_timer.expires = jiffies + ((HZ * hc->rh.interval) / 1000);
- add_timer(&hc->rh.rh_int_timer);
-
- DBFEXIT;
-}
-
-static void etrax_rh_int_timer_do(unsigned long ptr)
-{
- struct urb *urb;
- etrax_hc_t *hc;
-
- DBFENTER;
-
- urb = (struct urb*)ptr;
- hc = urb->dev->bus->hcpriv;
-
- if (hc->rh.send) {
- etrax_rh_send_irq(urb);
- }
-
- DBFEXIT;
-}
-
-static int etrax_usb_setup_epid(struct urb *urb)
-{
- int epid;
- char devnum, endpoint, out_traffic, slow;
- int maxlen;
- unsigned long flags;
-
- DBFENTER;
-
- epid = etrax_usb_lookup_epid(urb);
- if ((epid != -1)){
- /* An epid that fits this urb has been found. */
- DBFEXIT;
- return epid;
- }
-
- /* We must find and initiate a new epid for this urb. */
- epid = etrax_usb_allocate_epid();
-
- if (epid == -1) {
- /* Failed to allocate a new epid. */
- DBFEXIT;
- return epid;
- }
-
- /* We now have a new epid to use. Initiate it. */
- set_bit(epid, (void *)&epid_usage_bitmask);
-
- devnum = usb_pipedevice(urb->pipe);
- endpoint = usb_pipeendpoint(urb->pipe);
- slow = usb_pipeslow(urb->pipe);
- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
- if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
- /* We want both IN and OUT control traffic to be put on the same EP/SB list. */
- out_traffic = 1;
- } else {
- out_traffic = usb_pipeout(urb->pipe);
- }
-
- save_flags(flags);
- cli();
-
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
- nop();
-
- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
- *R_USB_EPT_DATA_ISO = IO_STATE(R_USB_EPT_DATA_ISO, valid, yes) |
- /* FIXME: Change any to the actual port? */
- IO_STATE(R_USB_EPT_DATA_ISO, port, any) |
- IO_FIELD(R_USB_EPT_DATA_ISO, max_len, maxlen) |
- IO_FIELD(R_USB_EPT_DATA_ISO, ep, endpoint) |
- IO_FIELD(R_USB_EPT_DATA_ISO, dev, devnum);
- } else {
- *R_USB_EPT_DATA = IO_STATE(R_USB_EPT_DATA, valid, yes) |
- IO_FIELD(R_USB_EPT_DATA, low_speed, slow) |
- /* FIXME: Change any to the actual port? */
- IO_STATE(R_USB_EPT_DATA, port, any) |
- IO_FIELD(R_USB_EPT_DATA, max_len, maxlen) |
- IO_FIELD(R_USB_EPT_DATA, ep, endpoint) |
- IO_FIELD(R_USB_EPT_DATA, dev, devnum);
- }
-
- restore_flags(flags);
-
- if (out_traffic) {
- set_bit(epid, (void *)&epid_out_traffic);
- } else {
- clear_bit(epid, (void *)&epid_out_traffic);
- }
-
- dbg_epid("Setting up epid %d with devnum %d, endpoint %d and max_len %d (%s)",
- epid, devnum, endpoint, maxlen, out_traffic ? "OUT" : "IN");
-
- DBFEXIT;
- return epid;
-}
-
-static void etrax_usb_free_epid(int epid)
-{
- unsigned long flags;
-
- DBFENTER;
-
- if (!test_bit(epid, (void *)&epid_usage_bitmask)) {
- warn("Trying to free unused epid %d", epid);
- DBFEXIT;
- return;
- }
-
- save_flags(flags);
- cli();
-
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
- nop();
- while (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold));
- /* This will, among other things, set the valid field to 0. */
- *R_USB_EPT_DATA = 0;
- restore_flags(flags);
-
- clear_bit(epid, (void *)&epid_usage_bitmask);
-
-
- dbg_epid("Freed epid %d", epid);
-
- DBFEXIT;
-}
-
-static int etrax_usb_lookup_epid(struct urb *urb)
-{
- int i;
- __u32 data;
- char devnum, endpoint, slow, out_traffic;
- int maxlen;
- unsigned long flags;
-
- DBFENTER;
-
- devnum = usb_pipedevice(urb->pipe);
- endpoint = usb_pipeendpoint(urb->pipe);
- slow = usb_pipeslow(urb->pipe);
- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
- if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
- /* We want both IN and OUT control traffic to be put on the same EP/SB list. */
- out_traffic = 1;
- } else {
- out_traffic = usb_pipeout(urb->pipe);
- }
-
- /* Step through att epids. */
- for (i = 0; i < NBR_OF_EPIDS; i++) {
- if (test_bit(i, (void *)&epid_usage_bitmask) &&
- test_bit(i, (void *)&epid_out_traffic) == out_traffic) {
-
- save_flags(flags);
- cli();
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, i);
- nop();
-
- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
- data = *R_USB_EPT_DATA_ISO;
- restore_flags(flags);
-
- if ((IO_MASK(R_USB_EPT_DATA_ISO, valid) & data) &&
- (IO_EXTRACT(R_USB_EPT_DATA_ISO, dev, data) == devnum) &&
- (IO_EXTRACT(R_USB_EPT_DATA_ISO, ep, data) == endpoint) &&
- (IO_EXTRACT(R_USB_EPT_DATA_ISO, max_len, data) == maxlen)) {
- dbg_epid("Found epid %d for devnum %d, endpoint %d (%s)",
- i, devnum, endpoint, out_traffic ? "OUT" : "IN");
- DBFEXIT;
- return i;
- }
- } else {
- data = *R_USB_EPT_DATA;
- restore_flags(flags);
-
- if ((IO_MASK(R_USB_EPT_DATA, valid) & data) &&
- (IO_EXTRACT(R_USB_EPT_DATA, dev, data) == devnum) &&
- (IO_EXTRACT(R_USB_EPT_DATA, ep, data) == endpoint) &&
- (IO_EXTRACT(R_USB_EPT_DATA, low_speed, data) == slow) &&
- (IO_EXTRACT(R_USB_EPT_DATA, max_len, data) == maxlen)) {
- dbg_epid("Found epid %d for devnum %d, endpoint %d (%s)",
- i, devnum, endpoint, out_traffic ? "OUT" : "IN");
- DBFEXIT;
- return i;
- }
- }
- }
- }
-
- DBFEXIT;
- return -1;
-}
-
-static int etrax_usb_allocate_epid(void)
-{
- int i;
-
- DBFENTER;
-
- for (i = 0; i < NBR_OF_EPIDS; i++) {
- if (!test_bit(i, (void *)&epid_usage_bitmask)) {
- dbg_epid("Found free epid %d", i);
- DBFEXIT;
- return i;
- }
- }
-
- dbg_epid("Found no free epids");
- DBFEXIT;
- return -1;
-}
-
-static int etrax_usb_submit_urb(struct urb *urb, unsigned mem_flags)
-{
- etrax_hc_t *hc;
- int ret = -EINVAL;
-
- DBFENTER;
-
- if (!urb->dev || !urb->dev->bus) {
- return -ENODEV;
- }
- if (usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)) <= 0) {
- info("Submit urb to pipe with maxpacketlen 0, pipe 0x%X\n", urb->pipe);
- return -EMSGSIZE;
- }
-
- if (urb->timeout) {
- /* FIXME. */
- warn("urb->timeout specified, ignoring.");
- }
-
- hc = (etrax_hc_t*)urb->dev->bus->hcpriv;
-
- if (usb_pipedevice(urb->pipe) == hc->rh.devnum) {
- /* This request is for the Virtual Root Hub. */
- ret = etrax_rh_submit_urb(urb);
-
- } else if (usb_pipetype(urb->pipe) == PIPE_BULK) {
-
- ret = etrax_usb_submit_bulk_urb(urb);
-
- } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
-
- ret = etrax_usb_submit_ctrl_urb(urb);
-
- } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
- int bustime;
-
- if (urb->bandwidth == 0) {
- bustime = usb_check_bandwidth(urb->dev, urb);
- if (bustime < 0) {
- ret = bustime;
- } else {
- ret = etrax_usb_submit_intr_urb(urb);
- if (ret == 0)
- usb_claim_bandwidth(urb->dev, urb, bustime, 0);
- }
- } else {
- /* Bandwidth already set. */
- ret = etrax_usb_submit_intr_urb(urb);
- }
-
- } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
- int bustime;
-
- if (urb->bandwidth == 0) {
- bustime = usb_check_bandwidth(urb->dev, urb);
- if (bustime < 0) {
- ret = bustime;
- } else {
- ret = etrax_usb_submit_isoc_urb(urb);
- if (ret == 0)
- usb_claim_bandwidth(urb->dev, urb, bustime, 0);
- }
- } else {
- /* Bandwidth already set. */
- ret = etrax_usb_submit_isoc_urb(urb);
- }
- }
-
- DBFEXIT;
-
- if (ret != 0)
- printk("Submit URB error %d\n", ret);
-
- return ret;
-}
-
-static int etrax_usb_unlink_urb(struct urb *urb, int status)
-{
- etrax_hc_t *hc;
- etrax_urb_priv_t *urb_priv;
- int epid;
- unsigned int flags;
-
- DBFENTER;
-
- if (!urb) {
- return -EINVAL;
- }
-
- /* Disable interrupts here since a descriptor interrupt for the isoc epid
- will modify the sb list. This could possibly be done more granular, but
- unlink_urb should not be used frequently anyway.
- */
-
- save_flags(flags);
- cli();
-
- if (!urb->dev || !urb->dev->bus) {
- restore_flags(flags);
- return -ENODEV;
- }
- if (!urb->hcpriv) {
- /* This happens if a device driver calls unlink on an urb that
- was never submitted (lazy driver) or if the urb was completed
- while unlink was being called. */
- restore_flags(flags);
- return 0;
- }
- if (urb->transfer_flags & URB_ASYNC_UNLINK) {
- /* FIXME. */
- /* If URB_ASYNC_UNLINK is set:
- unlink
- move to a separate urb list
- call complete at next sof with ECONNRESET
-
- If not:
- wait 1 ms
- unlink
- call complete with ENOENT
- */
- warn("URB_ASYNC_UNLINK set, ignoring.");
- }
-
- /* One might think that urb->status = -EINPROGRESS would be a requirement for unlinking,
- but that doesn't work for interrupt and isochronous traffic since they are completed
- repeatedly, and urb->status is set then. That may in itself be a bug though. */
-
- hc = urb->dev->bus->hcpriv;
- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- epid = urb_priv->epid;
-
- /* Set the urb status (synchronous unlink). */
- urb->status = -ENOENT;
- urb_priv->urb_state = UNLINK;
-
- if (usb_pipedevice(urb->pipe) == hc->rh.devnum) {
- int ret;
- ret = etrax_rh_unlink_urb(urb);
- DBFEXIT;
- restore_flags(flags);
- return ret;
-
- } else if (usb_pipetype(urb->pipe) == PIPE_BULK) {
-
- dbg_bulk("Unlink of bulk urb (0x%lx)", (unsigned long)urb);
-
- if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
- /* The EP was enabled, disable it and wait. */
- TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
-
- /* Ah, the luxury of busy-wait. */
- while (*R_DMA_CH8_SUB0_EP == virt_to_phys(&TxBulkEPList[epid]));
- }
- /* Kicking dummy list out of the party. */
- TxBulkEPList[epid].next = virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]);
-
- } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
-
- dbg_ctrl("Unlink of ctrl urb (0x%lx)", (unsigned long)urb);
-
- if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
- /* The EP was enabled, disable it and wait. */
- TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
-
- /* Ah, the luxury of busy-wait. */
- while (*R_DMA_CH8_SUB1_EP == virt_to_phys(&TxCtrlEPList[epid]));
- }
-
- } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
-
- dbg_intr("Unlink of intr urb (0x%lx)", (unsigned long)urb);
-
- /* Separate function because it's a tad more complicated. */
- etrax_usb_unlink_intr_urb(urb);
-
- } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-
- dbg_isoc("Unlink of isoc urb (0x%lx)", (unsigned long)urb);
-
- if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
- /* The EP was enabled, disable it and wait. */
- TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
-
- /* Ah, the luxury of busy-wait. */
- while (*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid]));
- }
- }
-
- /* Note that we need to remove the urb from the urb list *before* removing its SB
- descriptors. (This means that the isoc eof handler might get a null urb when we
- are unlinking the last urb.) */
-
- if (usb_pipetype(urb->pipe) == PIPE_BULK) {
-
- urb_list_del(urb, epid);
- TxBulkEPList[epid].sub = 0;
- etrax_remove_from_sb_list(urb);
-
- } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
-
- urb_list_del(urb, epid);
- TxCtrlEPList[epid].sub = 0;
- etrax_remove_from_sb_list(urb);
-
- } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
-
- urb_list_del(urb, epid);
- /* Sanity check (should never happen). */
- assert(urb_list_empty(epid));
-
- /* Release allocated bandwidth. */
- usb_release_bandwidth(urb->dev, urb, 0);
-
- } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-
- if (usb_pipeout(urb->pipe)) {
-
- USB_SB_Desc_t *iter_sb, *prev_sb, *next_sb;
-
- if (__urb_list_entry(urb, epid)) {
-
- urb_list_del(urb, epid);
- iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0;
- prev_sb = 0;
- while (iter_sb && (iter_sb != urb_priv->first_sb)) {
- prev_sb = iter_sb;
- iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
- }
-
- if (iter_sb == 0) {
- /* Unlink of the URB currently being transmitted. */
- prev_sb = 0;
- iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0;
- }
-
- while (iter_sb && (iter_sb != urb_priv->last_sb)) {
- iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
- }
- if (iter_sb) {
- next_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
- } else {
- /* This should only happen if the DMA has completed
- processing the SB list for this EP while interrupts
- are disabled. */
- dbg_isoc("Isoc urb not found, already sent?");
- next_sb = 0;
- }
- if (prev_sb) {
- prev_sb->next = next_sb ? virt_to_phys(next_sb) : 0;
- } else {
- TxIsocEPList[epid].sub = next_sb ? virt_to_phys(next_sb) : 0;
- }
-
- etrax_remove_from_sb_list(urb);
- if (urb_list_empty(epid)) {
- TxIsocEPList[epid].sub = 0;
- dbg_isoc("Last isoc out urb epid %d", epid);
- } else if (next_sb || prev_sb) {
- dbg_isoc("Re-enable isoc out epid %d", epid);
-
- TxIsocEPList[epid].hw_len = 0;
- TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
- } else {
- TxIsocEPList[epid].sub = 0;
- dbg_isoc("URB list non-empty and no SB list, EP disabled");
- }
- } else {
- dbg_isoc("Urb 0x%p not found, completed already?", urb);
- }
- } else {
-
- urb_list_del(urb, epid);
-
- /* For in traffic there is only one SB descriptor for each EP even
- though there may be several urbs (all urbs point at the same SB). */
- if (urb_list_empty(epid)) {
- /* No more urbs, remove the SB. */
- TxIsocEPList[epid].sub = 0;
- etrax_remove_from_sb_list(urb);
- } else {
- TxIsocEPList[epid].hw_len = 0;
- TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
- }
- }
- /* Release allocated bandwidth. */
- usb_release_bandwidth(urb->dev, urb, 1);
- }
- /* Free the epid if urb list is empty. */
- if (urb_list_empty(epid)) {
- etrax_usb_free_epid(epid);
- }
- restore_flags(flags);
-
- /* Must be done before calling completion handler. */
- kfree(urb_priv);
- urb->hcpriv = 0;
-
- if (urb->complete) {
- urb->complete(urb, NULL);
- }
-
- DBFEXIT;
- return 0;
-}
-
-static int etrax_usb_get_frame_number(struct usb_device *usb_dev)
-{
- DBFENTER;
- DBFEXIT;
- return (*R_USB_FM_NUMBER & 0x7ff);
-}
-
-static irqreturn_t etrax_usb_tx_interrupt(int irq, void *vhc)
-{
- DBFENTER;
-
- /* This interrupt handler could be used when unlinking EP descriptors. */
-
- if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub0_descr)) {
- USB_EP_Desc_t *ep;
-
- //dbg_bulk("dma8_sub0_descr (BULK) intr.");
-
- /* It should be safe clearing the interrupt here, since we don't expect to get a new
- one until we restart the bulk channel. */
- *R_DMA_CH8_SUB0_CLR_INTR = IO_STATE(R_DMA_CH8_SUB0_CLR_INTR, clr_descr, do);
-
- /* Wait while the DMA is running (though we don't expect it to be). */
- while (*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd));
-
- /* Advance the DMA to the next EP descriptor. */
- ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB0_EP);
-
- //dbg_bulk("descr intr: DMA is at 0x%lx", (unsigned long)ep);
-
- /* ep->next is already a physical address; no need for a virt_to_phys. */
- *R_DMA_CH8_SUB0_EP = ep->next;
-
- /* Start the DMA bulk channel again. */
- *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start);
- }
- if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub1_descr)) {
- struct urb *urb;
- int epid;
- etrax_urb_priv_t *urb_priv;
- unsigned long int flags;
-
- dbg_ctrl("dma8_sub1_descr (CTRL) intr.");
- *R_DMA_CH8_SUB1_CLR_INTR = IO_STATE(R_DMA_CH8_SUB1_CLR_INTR, clr_descr, do);
-
- /* The complete callback gets called so we cli. */
- save_flags(flags);
- cli();
-
- for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
- if ((TxCtrlEPList[epid].sub == 0) ||
- (epid == DUMMY_EPID) ||
- (epid == INVALID_EPID)) {
- /* Nothing here to see. */
- continue;
- }
-
- /* Get the first urb (if any). */
- urb = urb_list_first(epid);
-
- if (urb) {
-
- /* Sanity check. */
- assert(usb_pipetype(urb->pipe) == PIPE_CONTROL);
-
- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- assert(urb_priv);
-
- if (urb_priv->urb_state == WAITING_FOR_DESCR_INTR) {
- assert(!(TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable)));
-
- etrax_usb_complete_urb(urb, 0);
- }
- }
- }
- restore_flags(flags);
- }
- if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub2_descr)) {
- dbg_intr("dma8_sub2_descr (INTR) intr.");
- *R_DMA_CH8_SUB2_CLR_INTR = IO_STATE(R_DMA_CH8_SUB2_CLR_INTR, clr_descr, do);
- }
- if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub3_descr)) {
- struct urb *urb;
- int epid;
- int epid_done;
- etrax_urb_priv_t *urb_priv;
- USB_SB_Desc_t *sb_desc;
-
- usb_isoc_complete_data_t *comp_data = NULL;
-
- /* One or more isoc out transfers are done. */
- dbg_isoc("dma8_sub3_descr (ISOC) intr.");
-
- /* For each isoc out EP search for the first sb_desc with the intr flag
- set. This descriptor must be the last packet from an URB. Then
- traverse the URB list for the EP until the URB with urb_priv->last_sb
- matching the intr-marked sb_desc is found. All URBs before this have
- been sent.
- */
-
- for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
- /* Skip past epids with no SB lists, epids used for in traffic,
- and special (dummy, invalid) epids. */
- if ((TxIsocEPList[epid].sub == 0) ||
- (test_bit(epid, (void *)&epid_out_traffic) == 0) ||
- (epid == DUMMY_EPID) ||
- (epid == INVALID_EPID)) {
- /* Nothing here to see. */
- continue;
- }
- sb_desc = phys_to_virt(TxIsocEPList[epid].sub);
-
- /* Find the last descriptor of the currently active URB for this ep.
- This is the first descriptor in the sub list marked for a descriptor
- interrupt. */
- while (sb_desc && !IO_EXTRACT(USB_SB_command, intr, sb_desc->command)) {
- sb_desc = sb_desc->next ? phys_to_virt(sb_desc->next) : 0;
- }
- assert(sb_desc);
-
- dbg_isoc("Check epid %d, sub 0x%p, SB 0x%p",
- epid,
- phys_to_virt(TxIsocEPList[epid].sub),
- sb_desc);
-
- epid_done = 0;
-
- /* Get the first urb (if any). */
- urb = urb_list_first(epid);
- assert(urb);
-
- while (urb && !epid_done) {
-
- /* Sanity check. */
- assert(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
-
- if (!usb_pipeout(urb->pipe)) {
- /* descr interrupts are generated only for out pipes. */
- epid_done = 1;
- continue;
- }
-
- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- assert(urb_priv);
-
- if (sb_desc != urb_priv->last_sb) {
-
- /* This urb has been sent. */
- dbg_isoc("out URB 0x%p sent", urb);
-
- urb_priv->urb_state = TRANSFER_DONE;
-
- } else if ((sb_desc == urb_priv->last_sb) &&
- !(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) {
-
- assert((sb_desc->command & IO_MASK(USB_SB_command, eol)) == IO_STATE(USB_SB_command, eol, yes));
- assert(sb_desc->next == 0);
-
- dbg_isoc("out URB 0x%p last in list, epid disabled", urb);
- TxIsocEPList[epid].sub = 0;
- TxIsocEPList[epid].hw_len = 0;
- urb_priv->urb_state = TRANSFER_DONE;
-
- epid_done = 1;
-
- } else {
- epid_done = 1;
- }
- if (!epid_done) {
- urb = urb_list_next(urb, epid);
- }
- }
-
- }
-
- *R_DMA_CH8_SUB3_CLR_INTR = IO_STATE(R_DMA_CH8_SUB3_CLR_INTR, clr_descr, do);
-
- comp_data = (usb_isoc_complete_data_t*)kmem_cache_alloc(isoc_compl_cache, SLAB_ATOMIC);
- assert(comp_data != NULL);
-
- INIT_WORK(&comp_data->usb_bh, etrax_usb_isoc_descr_interrupt_bottom_half, comp_data);
- schedule_work(&comp_data->usb_bh);
- }
-
- DBFEXIT;
- return IRQ_HANDLED;
-}
-
-static void etrax_usb_isoc_descr_interrupt_bottom_half(void *data)
-{
- usb_isoc_complete_data_t *comp_data = (usb_isoc_complete_data_t*)data;
-
- struct urb *urb;
- int epid;
- int epid_done;
- etrax_urb_priv_t *urb_priv;
-
- DBFENTER;
-
- dbg_isoc("dma8_sub3_descr (ISOC) bottom half.");
-
- for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
- unsigned long flags;
-
- save_flags(flags);
- cli();
-
- epid_done = 0;
-
- /* The descriptor interrupt handler has marked all transmitted isoch. out
- URBs with TRANSFER_DONE. Now we traverse all epids and for all that
- have isoch. out traffic traverse its URB list and complete the
- transmitted URB.
- */
-
- while (!epid_done) {
-
- /* Get the first urb (if any). */
- urb = urb_list_first(epid);
- if (urb == 0) {
- epid_done = 1;
- continue;
- }
-
- if (usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) {
- epid_done = 1;
- continue;
- }
-
- if (!usb_pipeout(urb->pipe)) {
- /* descr interrupts are generated only for out pipes. */
- epid_done = 1;
- continue;
- }
-
- dbg_isoc("Check epid %d, SB 0x%p", epid, (char*)TxIsocEPList[epid].sub);
-
- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- assert(urb_priv);
-
- if (urb_priv->urb_state == TRANSFER_DONE) {
- int i;
- struct usb_iso_packet_descriptor *packet;
-
- /* This urb has been sent. */
- dbg_isoc("Completing isoc out URB 0x%p", urb);
-
- for (i = 0; i < urb->number_of_packets; i++) {
- packet = &urb->iso_frame_desc[i];
- packet->status = 0;
- packet->actual_length = packet->length;
- }
-
- etrax_usb_complete_isoc_urb(urb, 0);
-
- if (urb_list_empty(epid)) {
- etrax_usb_free_epid(epid);
- epid_done = 1;
- }
- } else {
- epid_done = 1;
- }
- }
- restore_flags(flags);
-
- }
- kmem_cache_free(isoc_compl_cache, comp_data);
-
- DBFEXIT;
-}
-
-
-
-static irqreturn_t etrax_usb_rx_interrupt(int irq, void *vhc)
-{
- struct urb *urb;
- etrax_urb_priv_t *urb_priv;
- int epid = 0;
- unsigned long flags;
-
- /* Isoc diagnostics. */
- static int curr_fm = 0;
- static int prev_fm = 0;
-
- DBFENTER;
-
- /* Clear this interrupt. */
- *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do);
-
- /* Note that this while loop assumes that all packets span only
- one rx descriptor. */
-
- /* The reason we cli here is that we call the driver's callback functions. */
- save_flags(flags);
- cli();
-
- while (myNextRxDesc->status & IO_MASK(USB_IN_status, eop)) {
-
- epid = IO_EXTRACT(USB_IN_status, epid, myNextRxDesc->status);
- urb = urb_list_first(epid);
-
- //printk("eop for epid %d, first urb 0x%lx\n", epid, (unsigned long)urb);
-
- if (!urb) {
- err("No urb for epid %d in rx interrupt", epid);
- __dump_ept_data(epid);
- goto skip_out;
- }
-
- /* Note that we cannot indescriminately assert(usb_pipein(urb->pipe)) since
- ctrl pipes are not. */
-
- if (myNextRxDesc->status & IO_MASK(USB_IN_status, error)) {
- __u32 r_usb_ept_data;
- int no_error = 0;
-
- assert(test_bit(epid, (void *)&epid_usage_bitmask));
-
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
- nop();
- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
- r_usb_ept_data = *R_USB_EPT_DATA_ISO;
-
- if ((r_usb_ept_data & IO_MASK(R_USB_EPT_DATA_ISO, valid)) &&
- (IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data) == 0) &&
- (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata))) {
- /* Not an error, just a failure to receive an expected iso
- in packet in this frame. This is not documented
- in the designers reference.
- */
- no_error++;
- } else {
- warn("R_USB_EPT_DATA_ISO for epid %d = 0x%x", epid, r_usb_ept_data);
- }
- } else {
- r_usb_ept_data = *R_USB_EPT_DATA;
- warn("R_USB_EPT_DATA for epid %d = 0x%x", epid, r_usb_ept_data);
- }
-
- if (!no_error){
- warn("error in rx desc->status, epid %d, first urb = 0x%lx",
- epid, (unsigned long)urb);
- __dump_in_desc(myNextRxDesc);
-
- warn("R_USB_STATUS = 0x%x", *R_USB_STATUS);
-
- /* Check that ept was disabled when error occurred. */
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_BULK:
- assert(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)));
- break;
- case PIPE_CONTROL:
- assert(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)));
- break;
- case PIPE_INTERRUPT:
- assert(!(TxIntrEPList[epid].command & IO_MASK(USB_EP_command, enable)));
- break;
- case PIPE_ISOCHRONOUS:
- assert(!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)));
- break;
- default:
- warn("etrax_usb_rx_interrupt: bad pipetype %d in urb 0x%p",
- usb_pipetype(urb->pipe),
- urb);
- }
- etrax_usb_complete_urb(urb, -EPROTO);
- goto skip_out;
- }
- }
-
- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- assert(urb_priv);
-
- if ((usb_pipetype(urb->pipe) == PIPE_BULK) ||
- (usb_pipetype(urb->pipe) == PIPE_CONTROL) ||
- (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) {
-
- if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) {
- /* We get nodata for empty data transactions, and the rx descriptor's
- hw_len field is not valid in that case. No data to copy in other
- words. */
- } else {
- /* Make sure the data fits in the buffer. */
- assert(urb_priv->rx_offset + myNextRxDesc->hw_len
- <= urb->transfer_buffer_length);
-
- memcpy(urb->transfer_buffer + urb_priv->rx_offset,
- phys_to_virt(myNextRxDesc->buf), myNextRxDesc->hw_len);
- urb_priv->rx_offset += myNextRxDesc->hw_len;
- }
-
- if (myNextRxDesc->status & IO_MASK(USB_IN_status, eot)) {
- if ((usb_pipetype(urb->pipe) == PIPE_CONTROL) &&
- ((TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable)) ==
- IO_STATE(USB_EP_command, enable, yes))) {
- /* The EP is still enabled, so the OUT packet used to ack
- the in data is probably not processed yet. If the EP
- sub pointer has not moved beyond urb_priv->last_sb mark
- it for a descriptor interrupt and complete the urb in
- the descriptor interrupt handler.
- */
- USB_SB_Desc_t *sub = TxCtrlEPList[urb_priv->epid].sub ? phys_to_virt(TxCtrlEPList[urb_priv->epid].sub) : 0;
-
- while ((sub != NULL) && (sub != urb_priv->last_sb)) {
- sub = sub->next ? phys_to_virt(sub->next) : 0;
- }
- if (sub != NULL) {
- /* The urb has not been fully processed. */
- urb_priv->urb_state = WAITING_FOR_DESCR_INTR;
- } else {
- warn("(CTRL) epid enabled and urb (0x%p) processed, ep->sub=0x%p", urb, (char*)TxCtrlEPList[urb_priv->epid].sub);
- etrax_usb_complete_urb(urb, 0);
- }
- } else {
- etrax_usb_complete_urb(urb, 0);
- }
- }
-
- } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-
- struct usb_iso_packet_descriptor *packet;
-
- if (urb_priv->urb_state == UNLINK) {
- info("Ignoring rx data for urb being unlinked.");
- goto skip_out;
- } else if (urb_priv->urb_state == NOT_STARTED) {
- info("What? Got rx data for urb that isn't started?");
- goto skip_out;
- }
-
- packet = &urb->iso_frame_desc[urb_priv->isoc_packet_counter];
- packet->status = 0;
-
- if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) {
- /* We get nodata for empty data transactions, and the rx descriptor's
- hw_len field is not valid in that case. We copy 0 bytes however to
- stay in synch. */
- packet->actual_length = 0;
- } else {
- packet->actual_length = myNextRxDesc->hw_len;
- /* Make sure the data fits in the buffer. */
- assert(packet->actual_length <= packet->length);
- memcpy(urb->transfer_buffer + packet->offset,
- phys_to_virt(myNextRxDesc->buf), packet->actual_length);
- }
-
- /* Increment the packet counter. */
- urb_priv->isoc_packet_counter++;
-
- /* Note that we don't care about the eot field in the rx descriptor's status.
- It will always be set for isoc traffic. */
- if (urb->number_of_packets == urb_priv->isoc_packet_counter) {
-
- /* Out-of-synch diagnostics. */
- curr_fm = (*R_USB_FM_NUMBER & 0x7ff);
- if (((prev_fm + urb_priv->isoc_packet_counter) % (0x7ff + 1)) != curr_fm) {
- /* This test is wrong, if there is more than one isoc
- in endpoint active it will always calculate wrong
- since prev_fm is shared by all endpoints.
-
- FIXME Make this check per URB using urb->start_frame.
- */
- dbg_isoc("Out of synch? Previous frame = %d, current frame = %d",
- prev_fm, curr_fm);
-
- }
- prev_fm = curr_fm;
-
- /* Complete the urb with status OK. */
- etrax_usb_complete_isoc_urb(urb, 0);
- }
- }
-
- skip_out:
-
- /* DMA IN cache bug. Flush the DMA IN buffer from the cache. (struct etrax_dma_descr
- has the same layout as USB_IN_Desc for the relevant fields.) */
- prepare_rx_descriptor((struct etrax_dma_descr*)myNextRxDesc);
-
- myPrevRxDesc = myNextRxDesc;
- myPrevRxDesc->command |= IO_MASK(USB_IN_command, eol);
- myLastRxDesc->command &= ~IO_MASK(USB_IN_command, eol);
- myLastRxDesc = myPrevRxDesc;
-
- myNextRxDesc->status = 0;
- myNextRxDesc = phys_to_virt(myNextRxDesc->next);
- }
-
- restore_flags(flags);
-
- DBFEXIT;
-
- return IRQ_HANDLED;
-}
-
-
-/* This function will unlink the SB descriptors associated with this urb. */
-static int etrax_remove_from_sb_list(struct urb *urb)
-{
- USB_SB_Desc_t *next_sb, *first_sb, *last_sb;
- etrax_urb_priv_t *urb_priv;
- int i = 0;
-
- DBFENTER;
-
- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- assert(urb_priv);
-
- /* Just a sanity check. Since we don't fiddle with the DMA list the EP descriptor
- doesn't really need to be disabled, it's just that we expect it to be. */
- if (usb_pipetype(urb->pipe) == PIPE_BULK) {
- assert(!(TxBulkEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable)));
- } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
- assert(!(TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable)));
- }
-
- first_sb = urb_priv->first_sb;
- last_sb = urb_priv->last_sb;
-
- assert(first_sb);
- assert(last_sb);
-
- while (first_sb != last_sb) {
- next_sb = (USB_SB_Desc_t *)phys_to_virt(first_sb->next);
- kmem_cache_free(usb_desc_cache, first_sb);
- first_sb = next_sb;
- i++;
- }
- kmem_cache_free(usb_desc_cache, last_sb);
- i++;
- dbg_sb("%d SB descriptors freed", i);
- /* Compare i with urb->number_of_packets for Isoc traffic.
- Should be same when calling unlink_urb */
-
- DBFEXIT;
-
- return i;
-}
-
-static int etrax_usb_submit_bulk_urb(struct urb *urb)
-{
- int epid;
- int empty;
- unsigned long flags;
- etrax_urb_priv_t *urb_priv;
-
- DBFENTER;
-
- /* Epid allocation, empty check and list add must be protected.
- Read about this in etrax_usb_submit_ctrl_urb. */
-
- spin_lock_irqsave(&urb_list_lock, flags);
- epid = etrax_usb_setup_epid(urb);
- if (epid == -1) {
- DBFEXIT;
- spin_unlock_irqrestore(&urb_list_lock, flags);
- return -ENOMEM;
- }
- empty = urb_list_empty(epid);
- urb_list_add(urb, epid);
- spin_unlock_irqrestore(&urb_list_lock, flags);
-
- dbg_bulk("Adding bulk %s urb 0x%lx to %s list, epid %d",
- usb_pipein(urb->pipe) ? "IN" : "OUT", (unsigned long)urb, empty ? "empty" : "", epid);
-
- /* Mark the urb as being in progress. */
- urb->status = -EINPROGRESS;
-
- /* Setup the hcpriv data. */
- urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG);
- assert(urb_priv != NULL);
- /* This sets rx_offset to 0. */
- urb_priv->urb_state = NOT_STARTED;
- urb->hcpriv = urb_priv;
-
- if (empty) {
- etrax_usb_add_to_bulk_sb_list(urb, epid);
- }
-
- DBFEXIT;
-
- return 0;
-}
-
-static void etrax_usb_add_to_bulk_sb_list(struct urb *urb, int epid)
-{
- USB_SB_Desc_t *sb_desc;
- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- unsigned long flags;
- char maxlen;
-
- DBFENTER;
-
- dbg_bulk("etrax_usb_add_to_bulk_sb_list, urb 0x%lx", (unsigned long)urb);
-
- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
-
- sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
- assert(sb_desc != NULL);
- memset(sb_desc, 0, sizeof(USB_SB_Desc_t));
-
-
- if (usb_pipeout(urb->pipe)) {
-
- dbg_bulk("Grabbing bulk OUT, urb 0x%lx, epid %d", (unsigned long)urb, epid);
-
- /* This is probably a sanity check of the bulk transaction length
- not being larger than 64 kB. */
- if (urb->transfer_buffer_length > 0xffff) {
- panic("urb->transfer_buffer_length > 0xffff");
- }
-
- sb_desc->sw_len = urb->transfer_buffer_length;
-
- /* The rem field is don't care if it's not a full-length transfer, so setting
- it shouldn't hurt. Also, rem isn't used for OUT traffic. */
- sb_desc->command = (IO_FIELD(USB_SB_command, rem, 0) |
- IO_STATE(USB_SB_command, tt, out) |
- IO_STATE(USB_SB_command, eot, yes) |
- IO_STATE(USB_SB_command, eol, yes));
-
- /* The full field is set to yes, even if we don't actually check that this is
- a full-length transfer (i.e., that transfer_buffer_length % maxlen = 0).
- Setting full prevents the USB controller from sending an empty packet in
- that case. However, if URB_ZERO_PACKET was set we want that. */
- if (!(urb->transfer_flags & URB_ZERO_PACKET)) {
- sb_desc->command |= IO_STATE(USB_SB_command, full, yes);
- }
-
- sb_desc->buf = virt_to_phys(urb->transfer_buffer);
- sb_desc->next = 0;
-
- } else if (usb_pipein(urb->pipe)) {
-
- dbg_bulk("Grabbing bulk IN, urb 0x%lx, epid %d", (unsigned long)urb, epid);
-
- sb_desc->sw_len = urb->transfer_buffer_length ?
- (urb->transfer_buffer_length - 1) / maxlen + 1 : 0;
-
- /* The rem field is don't care if it's not a full-length transfer, so setting
- it shouldn't hurt. */
- sb_desc->command =
- (IO_FIELD(USB_SB_command, rem,
- urb->transfer_buffer_length % maxlen) |
- IO_STATE(USB_SB_command, tt, in) |
- IO_STATE(USB_SB_command, eot, yes) |
- IO_STATE(USB_SB_command, eol, yes));
-
- sb_desc->buf = 0;
- sb_desc->next = 0;
- }
-
- urb_priv->first_sb = sb_desc;
- urb_priv->last_sb = sb_desc;
- urb_priv->epid = epid;
-
- urb->hcpriv = urb_priv;
-
- /* Reset toggle bits and reset error count. */
- save_flags(flags);
- cli();
-
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
- nop();
-
- /* FIXME: Is this a special case since the hold field is checked,
- or should we check hold in a lot of other cases as well? */
- if (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) {
- panic("Hold was set in %s", __FUNCTION__);
- }
-
- /* Reset error counters (regardless of which direction this traffic is). */
- *R_USB_EPT_DATA &=
- ~(IO_MASK(R_USB_EPT_DATA, error_count_in) |
- IO_MASK(R_USB_EPT_DATA, error_count_out));
-
- /* Software must preset the toggle bits. */
- if (usb_pipeout(urb->pipe)) {
- char toggle =
- usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe));
- *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_out);
- *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_out, toggle);
- } else {
- char toggle =
- usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe));
- *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_in);
- *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_in, toggle);
- }
-
- /* Assert that the EP descriptor is disabled. */
- assert(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)));
-
- /* The reason we set the EP's sub pointer directly instead of
- walking the SB list and linking it last in the list is that we only
- have one active urb at a time (the rest are queued). */
-
- /* Note that we cannot have interrupts running when we have set the SB descriptor
- but the EP is not yet enabled. If a bulk eot happens for another EP, we will
- find this EP disabled and with a SB != 0, which will make us think that it's done. */
- TxBulkEPList[epid].sub = virt_to_phys(sb_desc);
- TxBulkEPList[epid].hw_len = 0;
- /* Note that we don't have to fill in the ep_id field since this
- was done when we allocated the EP descriptors in init_tx_bulk_ep. */
-
- /* Check if the dummy list is already with us (if several urbs were queued). */
- if (TxBulkEPList[epid].next != virt_to_phys(&TxBulkDummyEPList[epid][0])) {
-
- dbg_bulk("Inviting dummy list to the party for urb 0x%lx, epid %d",
- (unsigned long)urb, epid);
-
- /* The last EP in the dummy list already has its next pointer set to
- TxBulkEPList[epid].next. */
-
- /* We don't need to check if the DMA is at this EP or not before changing the
- next pointer, since we will do it in one 32-bit write (EP descriptors are
- 32-bit aligned). */
- TxBulkEPList[epid].next = virt_to_phys(&TxBulkDummyEPList[epid][0]);
- }
- /* Enable the EP descr. */
- dbg_bulk("Enabling bulk EP for urb 0x%lx, epid %d", (unsigned long)urb, epid);
- TxBulkEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
-
- /* Everything is set up, safe to enable interrupts again. */
- restore_flags(flags);
-
- /* If the DMA bulk channel isn't running, we need to restart it if it
- has stopped at the last EP descriptor (DMA stopped because there was
- no more traffic) or if it has stopped at a dummy EP with the intr flag
- set (DMA stopped because we were too slow in inserting new traffic). */
- if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) {
-
- USB_EP_Desc_t *ep;
- ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB0_EP);
- dbg_bulk("DMA channel not running in add");
- dbg_bulk("DMA is at 0x%lx", (unsigned long)ep);
-
- if (*R_DMA_CH8_SUB0_EP == virt_to_phys(&TxBulkEPList[NBR_OF_EPIDS - 1]) ||
- (ep->command & 0x8) >> 3) {
- *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start);
- /* Update/restart the bulk start timer since we just started the channel. */
- mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL);
- /* Update/restart the bulk eot timer since we just inserted traffic. */
- mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
- }
- }
-
- DBFEXIT;
-}
-
-static void etrax_usb_complete_bulk_urb(struct urb *urb, int status)
-{
- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- int epid = urb_priv->epid;
- unsigned long flags;
-
- DBFENTER;
-
- if (status)
- warn("Completing bulk urb with status %d.", status);
-
- dbg_bulk("Completing bulk urb 0x%lx for epid %d", (unsigned long)urb, epid);
-
- /* Update the urb list. */
- urb_list_del(urb, epid);
-
- /* For an IN pipe, we always set the actual length, regardless of whether there was
- an error or not (which means the device driver can use the data if it wants to). */
- if (usb_pipein(urb->pipe)) {
- urb->actual_length = urb_priv->rx_offset;
- } else {
- /* Set actual_length for OUT urbs also; the USB mass storage driver seems
- to want that. We wouldn't know of any partial writes if there was an error. */
- if (status == 0) {
- urb->actual_length = urb->transfer_buffer_length;
- } else {
- urb->actual_length = 0;
- }
- }
-
- /* FIXME: Is there something of the things below we shouldn't do if there was an error?
- Like, maybe we shouldn't toggle the toggle bits, or maybe we shouldn't insert more traffic. */
-
- save_flags(flags);
- cli();
-
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
- nop();
-
- /* We need to fiddle with the toggle bits because the hardware doesn't do it for us. */
- if (usb_pipeout(urb->pipe)) {
- char toggle =
- IO_EXTRACT(R_USB_EPT_DATA, t_out, *R_USB_EPT_DATA);
- usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
- usb_pipeout(urb->pipe), toggle);
- } else {
- char toggle =
- IO_EXTRACT(R_USB_EPT_DATA, t_in, *R_USB_EPT_DATA);
- usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
- usb_pipeout(urb->pipe), toggle);
- }
- restore_flags(flags);
-
- /* Remember to free the SBs. */
- etrax_remove_from_sb_list(urb);
- kfree(urb_priv);
- urb->hcpriv = 0;
-
- /* If there are any more urb's in the list we'd better start sending */
- if (!urb_list_empty(epid)) {
-
- struct urb *new_urb;
-
- /* Get the first urb. */
- new_urb = urb_list_first(epid);
- assert(new_urb);
-
- dbg_bulk("More bulk for epid %d", epid);
-
- etrax_usb_add_to_bulk_sb_list(new_urb, epid);
- }
-
- urb->status = status;
-
- /* We let any non-zero status from the layer above have precedence. */
- if (status == 0) {
- /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length)
- is to be treated as an error. */
- if (urb->transfer_flags & URB_SHORT_NOT_OK) {
- if (usb_pipein(urb->pipe) &&
- (urb->actual_length !=
- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)))) {
- urb->status = -EREMOTEIO;
- }
- }
- }
-
- if (urb->complete) {
- urb->complete(urb, NULL);
- }
-
- if (urb_list_empty(epid)) {
- /* This means that this EP is now free, deconfigure it. */
- etrax_usb_free_epid(epid);
-
- /* No more traffic; time to clean up.
- Must set sub pointer to 0, since we look at the sub pointer when handling
- the bulk eot interrupt. */
-
- dbg_bulk("No bulk for epid %d", epid);
-
- TxBulkEPList[epid].sub = 0;
-
- /* Unlink the dummy list. */
-
- dbg_bulk("Kicking dummy list out of party for urb 0x%lx, epid %d",
- (unsigned long)urb, epid);
-
- /* No need to wait for the DMA before changing the next pointer.
- The modulo NBR_OF_EPIDS isn't actually necessary, since we will never use
- the last one (INVALID_EPID) for actual traffic. */
- TxBulkEPList[epid].next =
- virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]);
- }
-
- DBFEXIT;
-}
-
-static int etrax_usb_submit_ctrl_urb(struct urb *urb)
-{
- int epid;
- int empty;
- unsigned long flags;
- etrax_urb_priv_t *urb_priv;
-
- DBFENTER;
-
- /* FIXME: Return -ENXIO if there is already a queued urb for this endpoint? */
-
- /* Epid allocation, empty check and list add must be protected.
-
- Epid allocation because if we find an existing epid for this endpoint an urb might be
- completed (emptying the list) before we add the new urb to the list, causing the epid
- to be de-allocated. We would then start the transfer with an invalid epid -> epid attn.
-
- Empty check and add because otherwise we might conclude that the list is not empty,
- after which it becomes empty before we add the new urb to the list, causing us not to
- insert the new traffic into the SB list. */
-
- spin_lock_irqsave(&urb_list_lock, flags);
- epid = etrax_usb_setup_epid(urb);
- if (epid == -1) {
- spin_unlock_irqrestore(&urb_list_lock, flags);
- DBFEXIT;
- return -ENOMEM;
- }
- empty = urb_list_empty(epid);
- urb_list_add(urb, epid);
- spin_unlock_irqrestore(&urb_list_lock, flags);
-
- dbg_ctrl("Adding ctrl urb 0x%lx to %s list, epid %d",
- (unsigned long)urb, empty ? "empty" : "", epid);
-
- /* Mark the urb as being in progress. */
- urb->status = -EINPROGRESS;
-
- /* Setup the hcpriv data. */
- urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG);
- assert(urb_priv != NULL);
- /* This sets rx_offset to 0. */
- urb_priv->urb_state = NOT_STARTED;
- urb->hcpriv = urb_priv;
-
- if (empty) {
- etrax_usb_add_to_ctrl_sb_list(urb, epid);
- }
-
- DBFEXIT;
-
- return 0;
-}
-
-static void etrax_usb_add_to_ctrl_sb_list(struct urb *urb, int epid)
-{
- USB_SB_Desc_t *sb_desc_setup;
- USB_SB_Desc_t *sb_desc_data;
- USB_SB_Desc_t *sb_desc_status;
-
- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
-
- unsigned long flags;
- char maxlen;
-
- DBFENTER;
-
- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
-
- sb_desc_setup = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
- assert(sb_desc_setup != NULL);
- sb_desc_status = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
- assert(sb_desc_status != NULL);
-
- /* Initialize the mandatory setup SB descriptor (used only in control transfers) */
- sb_desc_setup->sw_len = 8;
- sb_desc_setup->command = (IO_FIELD(USB_SB_command, rem, 0) |
- IO_STATE(USB_SB_command, tt, setup) |
- IO_STATE(USB_SB_command, full, yes) |
- IO_STATE(USB_SB_command, eot, yes));
-
- sb_desc_setup->buf = virt_to_phys(urb->setup_packet);
-
- if (usb_pipeout(urb->pipe)) {
- dbg_ctrl("Transfer for epid %d is OUT", epid);
-
- /* If this Control OUT transfer has an optional data stage we add an OUT token
- before the mandatory IN (status) token, hence the reordered SB list */
-
- sb_desc_setup->next = virt_to_phys(sb_desc_status);
- if (urb->transfer_buffer) {
-
- dbg_ctrl("This OUT transfer has an extra data stage");
-
- sb_desc_data = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
- assert(sb_desc_data != NULL);
-
- sb_desc_setup->next = virt_to_phys(sb_desc_data);
-
- sb_desc_data->sw_len = urb->transfer_buffer_length;
- sb_desc_data->command = (IO_STATE(USB_SB_command, tt, out) |
- IO_STATE(USB_SB_command, full, yes) |
- IO_STATE(USB_SB_command, eot, yes));
- sb_desc_data->buf = virt_to_phys(urb->transfer_buffer);
- sb_desc_data->next = virt_to_phys(sb_desc_status);
- }
-
- sb_desc_status->sw_len = 1;
- sb_desc_status->command = (IO_FIELD(USB_SB_command, rem, 0) |
- IO_STATE(USB_SB_command, tt, in) |
- IO_STATE(USB_SB_command, eot, yes) |
- IO_STATE(USB_SB_command, intr, yes) |
- IO_STATE(USB_SB_command, eol, yes));
-
- sb_desc_status->buf = 0;
- sb_desc_status->next = 0;
-
- } else if (usb_pipein(urb->pipe)) {
-
- dbg_ctrl("Transfer for epid %d is IN", epid);
- dbg_ctrl("transfer_buffer_length = %d", urb->transfer_buffer_length);
- dbg_ctrl("rem is calculated to %d", urb->transfer_buffer_length % maxlen);
-
- sb_desc_data = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
- assert(sb_desc_data != NULL);
-
- sb_desc_setup->next = virt_to_phys(sb_desc_data);
-
- sb_desc_data->sw_len = urb->transfer_buffer_length ?
- (urb->transfer_buffer_length - 1) / maxlen + 1 : 0;
- dbg_ctrl("sw_len got %d", sb_desc_data->sw_len);
-
- sb_desc_data->command =
- (IO_FIELD(USB_SB_command, rem,
- urb->transfer_buffer_length % maxlen) |
- IO_STATE(USB_SB_command, tt, in) |
- IO_STATE(USB_SB_command, eot, yes));
-
- sb_desc_data->buf = 0;
- sb_desc_data->next = virt_to_phys(sb_desc_status);
-
- /* Read comment at zout_buffer declaration for an explanation to this. */
- sb_desc_status->sw_len = 1;
- sb_desc_status->command = (IO_FIELD(USB_SB_command, rem, 0) |
- IO_STATE(USB_SB_command, tt, zout) |
- IO_STATE(USB_SB_command, full, yes) |
- IO_STATE(USB_SB_command, eot, yes) |
- IO_STATE(USB_SB_command, intr, yes) |
- IO_STATE(USB_SB_command, eol, yes));
-
- sb_desc_status->buf = virt_to_phys(&zout_buffer[0]);
- sb_desc_status->next = 0;
- }
-
- urb_priv->first_sb = sb_desc_setup;
- urb_priv->last_sb = sb_desc_status;
- urb_priv->epid = epid;
-
- urb_priv->urb_state = STARTED;
-
- /* Reset toggle bits and reset error count, remember to di and ei */
- /* Warning: it is possible that this locking doesn't work with bottom-halves */
-
- save_flags(flags);
- cli();
-
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
- nop();
- if (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) {
- panic("Hold was set in %s", __FUNCTION__);
- }
-
-
- /* FIXME: Compare with etrax_usb_add_to_bulk_sb_list where the toggle bits
- are set to a specific value. Why the difference? Read "Transfer and Toggle Bits
- in Designer's Reference, p. 8 - 11. */
- *R_USB_EPT_DATA &=
- ~(IO_MASK(R_USB_EPT_DATA, error_count_in) |
- IO_MASK(R_USB_EPT_DATA, error_count_out) |
- IO_MASK(R_USB_EPT_DATA, t_in) |
- IO_MASK(R_USB_EPT_DATA, t_out));
-
- /* Since we use the rx interrupt to complete ctrl urbs, we can enable interrupts now
- (i.e. we don't check the sub pointer on an eot interrupt like we do for bulk traffic). */
- restore_flags(flags);
-
- /* Assert that the EP descriptor is disabled. */
- assert(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)));
-
- /* Set up and enable the EP descriptor. */
- TxCtrlEPList[epid].sub = virt_to_phys(sb_desc_setup);
- TxCtrlEPList[epid].hw_len = 0;
- TxCtrlEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
-
- /* We start the DMA sub channel without checking if it's running or not, because:
- 1) If it's already running, issuing the start command is a nop.
- 2) We avoid a test-and-set race condition. */
- *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start);
-
- DBFEXIT;
-}
-
-static void etrax_usb_complete_ctrl_urb(struct urb *urb, int status)
-{
- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- int epid = urb_priv->epid;
-
- DBFENTER;
-
- if (status)
- warn("Completing ctrl urb with status %d.", status);
-
- dbg_ctrl("Completing ctrl epid %d, urb 0x%lx", epid, (unsigned long)urb);
-
- /* Remove this urb from the list. */
- urb_list_del(urb, epid);
-
- /* For an IN pipe, we always set the actual length, regardless of whether there was
- an error or not (which means the device driver can use the data if it wants to). */
- if (usb_pipein(urb->pipe)) {
- urb->actual_length = urb_priv->rx_offset;
- }
-
- /* FIXME: Is there something of the things below we shouldn't do if there was an error?
- Like, maybe we shouldn't insert more traffic. */
-
- /* Remember to free the SBs. */
- etrax_remove_from_sb_list(urb);
- kfree(urb_priv);
- urb->hcpriv = 0;
-
- /* If there are any more urbs in the list we'd better start sending. */
- if (!urb_list_empty(epid)) {
- struct urb *new_urb;
-
- /* Get the first urb. */
- new_urb = urb_list_first(epid);
- assert(new_urb);
-
- dbg_ctrl("More ctrl for epid %d, first urb = 0x%lx", epid, (unsigned long)new_urb);
-
- etrax_usb_add_to_ctrl_sb_list(new_urb, epid);
- }
-
- urb->status = status;
-
- /* We let any non-zero status from the layer above have precedence. */
- if (status == 0) {
- /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length)
- is to be treated as an error. */
- if (urb->transfer_flags & URB_SHORT_NOT_OK) {
- if (usb_pipein(urb->pipe) &&
- (urb->actual_length !=
- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)))) {
- urb->status = -EREMOTEIO;
- }
- }
- }
-
- if (urb->complete) {
- urb->complete(urb, NULL);
- }
-
- if (urb_list_empty(epid)) {
- /* No more traffic. Time to clean up. */
- etrax_usb_free_epid(epid);
- /* Must set sub pointer to 0. */
- dbg_ctrl("No ctrl for epid %d", epid);
- TxCtrlEPList[epid].sub = 0;
- }
-
- DBFEXIT;
-}
-
-static int etrax_usb_submit_intr_urb(struct urb *urb)
-{
-
- int epid;
-
- DBFENTER;
-
- if (usb_pipeout(urb->pipe)) {
- /* Unsupported transfer type.
- We don't support interrupt out traffic. (If we do, we can't support
- intervals for neither in or out traffic, but are forced to schedule all
- interrupt traffic in one frame.) */
- return -EINVAL;
- }
-
- epid = etrax_usb_setup_epid(urb);
- if (epid == -1) {
- DBFEXIT;
- return -ENOMEM;
- }
-
- if (!urb_list_empty(epid)) {
- /* There is already a queued urb for this endpoint. */
- etrax_usb_free_epid(epid);
- return -ENXIO;
- }
-
- urb->status = -EINPROGRESS;
-
- dbg_intr("Add intr urb 0x%lx, to list, epid %d", (unsigned long)urb, epid);
-
- urb_list_add(urb, epid);
- etrax_usb_add_to_intr_sb_list(urb, epid);
-
- return 0;
-
- DBFEXIT;
-}
-
-static void etrax_usb_add_to_intr_sb_list(struct urb *urb, int epid)
-{
-
- volatile USB_EP_Desc_t *tmp_ep;
- volatile USB_EP_Desc_t *first_ep;
-
- char maxlen;
- int interval;
- int i;
-
- etrax_urb_priv_t *urb_priv;
-
- DBFENTER;
-
- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
- interval = urb->interval;
-
- urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG);
- assert(urb_priv != NULL);
- urb->hcpriv = urb_priv;
-
- first_ep = &TxIntrEPList[0];
-
- /* Round of the interval to 2^n, it is obvious that this code favours
- smaller numbers, but that is actually a good thing */
- /* FIXME: The "rounding error" for larger intervals will be quite
- large. For in traffic this shouldn't be a problem since it will only
- mean that we "poll" more often. */
- for (i = 0; interval; i++) {
- interval = interval >> 1;
- }
- interval = 1 << (i - 1);
-
- dbg_intr("Interval rounded to %d", interval);
-
- tmp_ep = first_ep;
- i = 0;
- do {
- if (tmp_ep->command & IO_MASK(USB_EP_command, eof)) {
- if ((i % interval) == 0) {
- /* Insert the traffic ep after tmp_ep */
- USB_EP_Desc_t *ep_desc;
- USB_SB_Desc_t *sb_desc;
-
- dbg_intr("Inserting EP for epid %d", epid);
-
- ep_desc = (USB_EP_Desc_t *)
- kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
- sb_desc = (USB_SB_Desc_t *)
- kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
- assert(ep_desc != NULL);
- CHECK_ALIGN(ep_desc);
- assert(sb_desc != NULL);
-
- ep_desc->sub = virt_to_phys(sb_desc);
- ep_desc->hw_len = 0;
- ep_desc->command = (IO_FIELD(USB_EP_command, epid, epid) |
- IO_STATE(USB_EP_command, enable, yes));
-
-
- /* Round upwards the number of packets of size maxlen
- that this SB descriptor should receive. */
- sb_desc->sw_len = urb->transfer_buffer_length ?
- (urb->transfer_buffer_length - 1) / maxlen + 1 : 0;
- sb_desc->next = 0;
- sb_desc->buf = 0;
- sb_desc->command =
- (IO_FIELD(USB_SB_command, rem, urb->transfer_buffer_length % maxlen) |
- IO_STATE(USB_SB_command, tt, in) |
- IO_STATE(USB_SB_command, eot, yes) |
- IO_STATE(USB_SB_command, eol, yes));
-
- ep_desc->next = tmp_ep->next;
- tmp_ep->next = virt_to_phys(ep_desc);
- }
- i++;
- }
- tmp_ep = (USB_EP_Desc_t *)phys_to_virt(tmp_ep->next);
- } while (tmp_ep != first_ep);
-
-
- /* Note that first_sb/last_sb doesn't apply to interrupt traffic. */
- urb_priv->epid = epid;
-
- /* We start the DMA sub channel without checking if it's running or not, because:
- 1) If it's already running, issuing the start command is a nop.
- 2) We avoid a test-and-set race condition. */
- *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start);
-
- DBFEXIT;
-}
-
-
-
-static void etrax_usb_complete_intr_urb(struct urb *urb, int status)
-{
- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- int epid = urb_priv->epid;
-
- DBFENTER;
-
- if (status)
- warn("Completing intr urb with status %d.", status);
-
- dbg_intr("Completing intr epid %d, urb 0x%lx", epid, (unsigned long)urb);
-
- urb->status = status;
- urb->actual_length = urb_priv->rx_offset;
-
- dbg_intr("interrupt urb->actual_length = %d", urb->actual_length);
-
- /* We let any non-zero status from the layer above have precedence. */
- if (status == 0) {
- /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length)
- is to be treated as an error. */
- if (urb->transfer_flags & URB_SHORT_NOT_OK) {
- if (urb->actual_length !=
- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) {
- urb->status = -EREMOTEIO;
- }
- }
- }
-
- /* The driver will resubmit the URB so we need to remove it first */
- etrax_usb_unlink_urb(urb, 0);
- if (urb->complete) {
- urb->complete(urb, NULL);
- }
-
- DBFEXIT;
-}
-
-
-static int etrax_usb_submit_isoc_urb(struct urb *urb)
-{
- int epid;
- unsigned long flags;
-
- DBFENTER;
-
- dbg_isoc("Submitting isoc urb = 0x%lx", (unsigned long)urb);
-
- /* Epid allocation, empty check and list add must be protected.
- Read about this in etrax_usb_submit_ctrl_urb. */
-
- spin_lock_irqsave(&urb_list_lock, flags);
- /* Is there an active epid for this urb ? */
- epid = etrax_usb_setup_epid(urb);
- if (epid == -1) {
- DBFEXIT;
- spin_unlock_irqrestore(&urb_list_lock, flags);
- return -ENOMEM;
- }
-
- /* Ok, now we got valid endpoint, lets insert some traffic */
-
- urb->status = -EINPROGRESS;
-
- /* Find the last urb in the URB_List and add this urb after that one.
- Also add the traffic, that is do an etrax_usb_add_to_isoc_sb_list. This
- is important to make this in "real time" since isochronous traffic is
- time sensitive. */
-
- dbg_isoc("Adding isoc urb to (possibly empty) list");
- urb_list_add(urb, epid);
- etrax_usb_add_to_isoc_sb_list(urb, epid);
- spin_unlock_irqrestore(&urb_list_lock, flags);
-
- DBFEXIT;
-
- return 0;
-}
-
-static void etrax_usb_check_error_isoc_ep(const int epid)
-{
- unsigned long int flags;
- int error_code;
- __u32 r_usb_ept_data;
-
- /* We can't read R_USB_EPID_ATTN here since it would clear the iso_eof,
- bulk_eot and epid_attn interrupts. So we just check the status of
- the epid without testing if for it in R_USB_EPID_ATTN. */
-
-
- save_flags(flags);
- cli();
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
- nop();
- /* Note that although there are separate R_USB_EPT_DATA and R_USB_EPT_DATA_ISO
- registers, they are located at the same address and are of the same size.
- In other words, this read should be ok for isoc also. */
- r_usb_ept_data = *R_USB_EPT_DATA;
- restore_flags(flags);
-
- error_code = IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data);
-
- if (r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, hold)) {
- warn("Hold was set for epid %d.", epid);
- return;
- }
-
- if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, no_error)) {
-
- /* This indicates that the SB list of the ept was completed before
- new data was appended to it. This is not an error, but indicates
- large system or USB load and could possibly cause trouble for
- very timing sensitive USB device drivers so we log it.
- */
- info("Isoc. epid %d disabled with no error", epid);
- return;
-
- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, stall)) {
- /* Not really a protocol error, just says that the endpoint gave
- a stall response. Note that error_code cannot be stall for isoc. */
- panic("Isoc traffic cannot stall");
-
- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, bus_error)) {
- /* Two devices responded to a transaction request. Must be resolved
- by software. FIXME: Reset ports? */
- panic("Bus error for epid %d."
- " Two devices responded to transaction request",
- epid);
-
- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, buffer_error)) {
- /* DMA overrun or underrun. */
- warn("Buffer overrun/underrun for epid %d. DMA too busy?", epid);
-
- /* It seems that error_code = buffer_error in
- R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS
- are the same error. */
- }
-}
-
-
-static void etrax_usb_add_to_isoc_sb_list(struct urb *urb, int epid)
-{
-
- int i = 0;
-
- etrax_urb_priv_t *urb_priv;
- USB_SB_Desc_t *prev_sb_desc, *next_sb_desc, *temp_sb_desc;
-
- DBFENTER;
-
- prev_sb_desc = next_sb_desc = temp_sb_desc = NULL;
-
- urb_priv = kzalloc(sizeof(etrax_urb_priv_t), GFP_ATOMIC);
- assert(urb_priv != NULL);
-
- urb->hcpriv = urb_priv;
- urb_priv->epid = epid;
-
- if (usb_pipeout(urb->pipe)) {
-
- if (urb->number_of_packets == 0) panic("etrax_usb_add_to_isoc_sb_list 0 packets\n");
-
- dbg_isoc("Transfer for epid %d is OUT", epid);
- dbg_isoc("%d packets in URB", urb->number_of_packets);
-
- /* Create one SB descriptor for each packet and link them together. */
- for (i = 0; i < urb->number_of_packets; i++) {
- if (!urb->iso_frame_desc[i].length)
- continue;
-
- next_sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_ATOMIC);
- assert(next_sb_desc != NULL);
-
- if (urb->iso_frame_desc[i].length > 0) {
-
- next_sb_desc->command = (IO_STATE(USB_SB_command, tt, out) |
- IO_STATE(USB_SB_command, eot, yes));
-
- next_sb_desc->sw_len = urb->iso_frame_desc[i].length;
- next_sb_desc->buf = virt_to_phys((char*)urb->transfer_buffer + urb->iso_frame_desc[i].offset);
-
- /* Check if full length transfer. */
- if (urb->iso_frame_desc[i].length ==
- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) {
- next_sb_desc->command |= IO_STATE(USB_SB_command, full, yes);
- }
- } else {
- dbg_isoc("zero len packet");
- next_sb_desc->command = (IO_FIELD(USB_SB_command, rem, 0) |
- IO_STATE(USB_SB_command, tt, zout) |
- IO_STATE(USB_SB_command, eot, yes) |
- IO_STATE(USB_SB_command, full, yes));
-
- next_sb_desc->sw_len = 1;
- next_sb_desc->buf = virt_to_phys(&zout_buffer[0]);
- }
-
- /* First SB descriptor that belongs to this urb */
- if (i == 0)
- urb_priv->first_sb = next_sb_desc;
- else
- prev_sb_desc->next = virt_to_phys(next_sb_desc);
-
- prev_sb_desc = next_sb_desc;
- }
-
- next_sb_desc->command |= (IO_STATE(USB_SB_command, intr, yes) |
- IO_STATE(USB_SB_command, eol, yes));
- next_sb_desc->next = 0;
- urb_priv->last_sb = next_sb_desc;
-
- } else if (usb_pipein(urb->pipe)) {
-
- dbg_isoc("Transfer for epid %d is IN", epid);
- dbg_isoc("transfer_buffer_length = %d", urb->transfer_buffer_length);
- dbg_isoc("rem is calculated to %d", urb->iso_frame_desc[urb->number_of_packets - 1].length);
-
- /* Note that in descriptors for periodic traffic are not consumed. This means that
- the USB controller never propagates in the SB list. In other words, if there already
- is an SB descriptor in the list for this EP we don't have to do anything. */
- if (TxIsocEPList[epid].sub == 0) {
- dbg_isoc("Isoc traffic not already running, allocating SB");
-
- next_sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_ATOMIC);
- assert(next_sb_desc != NULL);
-
- next_sb_desc->command = (IO_STATE(USB_SB_command, tt, in) |
- IO_STATE(USB_SB_command, eot, yes) |
- IO_STATE(USB_SB_command, eol, yes));
-
- next_sb_desc->next = 0;
- next_sb_desc->sw_len = 1; /* Actual number of packets is not relevant
- for periodic in traffic as long as it is more
- than zero. Set to 1 always. */
- next_sb_desc->buf = 0;
-
- /* The rem field is don't care for isoc traffic, so we don't set it. */
-
- /* Only one SB descriptor that belongs to this urb. */
- urb_priv->first_sb = next_sb_desc;
- urb_priv->last_sb = next_sb_desc;
-
- } else {
-
- dbg_isoc("Isoc traffic already running, just setting first/last_sb");
-
- /* Each EP for isoc in will have only one SB descriptor, setup when submitting the
- already active urb. Note that even though we may have several first_sb/last_sb
- pointing at the same SB descriptor, they are freed only once (when the list has
- become empty). */
- urb_priv->first_sb = phys_to_virt(TxIsocEPList[epid].sub);
- urb_priv->last_sb = phys_to_virt(TxIsocEPList[epid].sub);
- return;
- }
-
- }
-
- /* Find the spot to insert this urb and add it. */
- if (TxIsocEPList[epid].sub == 0) {
- /* First SB descriptor inserted in this list (in or out). */
- dbg_isoc("Inserting SB desc first in list");
- TxIsocEPList[epid].hw_len = 0;
- TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
-
- } else {
- /* Isochronous traffic is already running, insert new traffic last (only out). */
- dbg_isoc("Inserting SB desc last in list");
- temp_sb_desc = phys_to_virt(TxIsocEPList[epid].sub);
- while ((temp_sb_desc->command & IO_MASK(USB_SB_command, eol)) !=
- IO_STATE(USB_SB_command, eol, yes)) {
- assert(temp_sb_desc->next);
- temp_sb_desc = phys_to_virt(temp_sb_desc->next);
- }
- dbg_isoc("Appending list on desc 0x%p", temp_sb_desc);
-
- /* Next pointer must be set before eol is removed. */
- temp_sb_desc->next = virt_to_phys(urb_priv->first_sb);
- /* Clear the previous end of list flag since there is a new in the
- added SB descriptor list. */
- temp_sb_desc->command &= ~IO_MASK(USB_SB_command, eol);
-
- if (!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) {
- /* 8.8.5 in Designer's Reference says we should check for and correct
- any errors in the EP here. That should not be necessary if epid_attn
- is handled correctly, so we assume all is ok. */
- dbg_isoc("EP disabled");
- etrax_usb_check_error_isoc_ep(epid);
-
- /* The SB list was exhausted. */
- if (virt_to_phys(urb_priv->last_sb) != TxIsocEPList[epid].sub) {
- /* The new sublist did not get processed before the EP was
- disabled. Setup the EP again. */
- dbg_isoc("Set EP sub to new list");
- TxIsocEPList[epid].hw_len = 0;
- TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
- }
- }
- }
-
- if (urb->transfer_flags & URB_ISO_ASAP) {
- /* The isoc transfer should be started as soon as possible. The start_frame
- field is a return value if URB_ISO_ASAP was set. Comparing R_USB_FM_NUMBER
- with a USB Chief trace shows that the first isoc IN token is sent 2 frames
- later. I'm not sure how this affects usage of the start_frame field by the
- device driver, or how it affects things when USB_ISO_ASAP is not set, so
- therefore there's no compensation for the 2 frame "lag" here. */
- urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff);
- TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
- urb_priv->urb_state = STARTED;
- dbg_isoc("URB_ISO_ASAP set, urb->start_frame set to %d", urb->start_frame);
- } else {
- /* Not started yet. */
- urb_priv->urb_state = NOT_STARTED;
- dbg_isoc("urb_priv->urb_state set to NOT_STARTED");
- }
-
- /* We start the DMA sub channel without checking if it's running or not, because:
- 1) If it's already running, issuing the start command is a nop.
- 2) We avoid a test-and-set race condition. */
- *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start);
-
- DBFEXIT;
-}
-
-static void etrax_usb_complete_isoc_urb(struct urb *urb, int status)
-{
- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- int epid = urb_priv->epid;
- int auto_resubmit = 0;
-
- DBFENTER;
- dbg_isoc("complete urb 0x%p, status %d", urb, status);
-
- if (status)
- warn("Completing isoc urb with status %d.", status);
-
- if (usb_pipein(urb->pipe)) {
- int i;
-
- /* Make that all isoc packets have status and length set before
- completing the urb. */
- for (i = urb_priv->isoc_packet_counter; i < urb->number_of_packets; i++) {
- urb->iso_frame_desc[i].actual_length = 0;
- urb->iso_frame_desc[i].status = -EPROTO;
- }
-
- urb_list_del(urb, epid);
-
- if (!list_empty(&urb_list[epid])) {
- ((etrax_urb_priv_t *)(urb_list_first(epid)->hcpriv))->urb_state = STARTED;
- } else {
- unsigned long int flags;
- if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
- /* The EP was enabled, disable it and wait. */
- TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
-
- /* Ah, the luxury of busy-wait. */
- while (*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid]));
- }
-
- etrax_remove_from_sb_list(urb);
- TxIsocEPList[epid].sub = 0;
- TxIsocEPList[epid].hw_len = 0;
-
- save_flags(flags);
- cli();
- etrax_usb_free_epid(epid);
- restore_flags(flags);
- }
-
- urb->hcpriv = 0;
- kfree(urb_priv);
-
- /* Release allocated bandwidth. */
- usb_release_bandwidth(urb->dev, urb, 0);
- } else if (usb_pipeout(urb->pipe)) {
- int freed_descr;
-
- dbg_isoc("Isoc out urb complete 0x%p", urb);
-
- /* Update the urb list. */
- urb_list_del(urb, epid);
-
- freed_descr = etrax_remove_from_sb_list(urb);
- dbg_isoc("freed %d descriptors of %d packets", freed_descr, urb->number_of_packets);
- assert(freed_descr == urb->number_of_packets);
- urb->hcpriv = 0;
- kfree(urb_priv);
-
- /* Release allocated bandwidth. */
- usb_release_bandwidth(urb->dev, urb, 0);
- }
-
- urb->status = status;
- if (urb->complete) {
- urb->complete(urb, NULL);
- }
-
- if (auto_resubmit) {
- /* Check that urb was not unlinked by the complete callback. */
- if (__urb_list_entry(urb, epid)) {
- /* Move this one down the list. */
- urb_list_move_last(urb, epid);
-
- /* Mark the now first urb as started (may already be). */
- ((etrax_urb_priv_t *)(urb_list_first(epid)->hcpriv))->urb_state = STARTED;
-
- /* Must set this to 0 since this urb is still active after
- completion. */
- urb_priv->isoc_packet_counter = 0;
- } else {
- warn("(ISOC) automatic resubmit urb 0x%p removed by complete.", urb);
- }
- }
-
- DBFEXIT;
-}
-
-static void etrax_usb_complete_urb(struct urb *urb, int status)
-{
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_BULK:
- etrax_usb_complete_bulk_urb(urb, status);
- break;
- case PIPE_CONTROL:
- etrax_usb_complete_ctrl_urb(urb, status);
- break;
- case PIPE_INTERRUPT:
- etrax_usb_complete_intr_urb(urb, status);
- break;
- case PIPE_ISOCHRONOUS:
- etrax_usb_complete_isoc_urb(urb, status);
- break;
- default:
- err("Unknown pipetype");
- }
-}
-
-
-
-static irqreturn_t etrax_usb_hc_interrupt_top_half(int irq, void *vhc)
-{
- usb_interrupt_registers_t *reg;
- unsigned long flags;
- __u32 irq_mask;
- __u8 status;
- __u32 epid_attn;
- __u16 port_status_1;
- __u16 port_status_2;
- __u32 fm_number;
-
- DBFENTER;
-
- /* Read critical registers into local variables, do kmalloc afterwards. */
- save_flags(flags);
- cli();
-
- irq_mask = *R_USB_IRQ_MASK_READ;
- /* Reading R_USB_STATUS clears the ctl_status interrupt. Note that R_USB_STATUS
- must be read before R_USB_EPID_ATTN since reading the latter clears the
- ourun and perror fields of R_USB_STATUS. */
- status = *R_USB_STATUS;
-
- /* Reading R_USB_EPID_ATTN clears the iso_eof, bulk_eot and epid_attn interrupts. */
- epid_attn = *R_USB_EPID_ATTN;
-
- /* Reading R_USB_RH_PORT_STATUS_1 and R_USB_RH_PORT_STATUS_2 clears the
- port_status interrupt. */
- port_status_1 = *R_USB_RH_PORT_STATUS_1;
- port_status_2 = *R_USB_RH_PORT_STATUS_2;
-
- /* Reading R_USB_FM_NUMBER clears the sof interrupt. */
- /* Note: the lower 11 bits contain the actual frame number, sent with each sof. */
- fm_number = *R_USB_FM_NUMBER;
-
- restore_flags(flags);
-
- reg = (usb_interrupt_registers_t *)kmem_cache_alloc(top_half_reg_cache, SLAB_ATOMIC);
-
- assert(reg != NULL);
-
- reg->hc = (etrax_hc_t *)vhc;
-
- /* Now put register values into kmalloc'd area. */
- reg->r_usb_irq_mask_read = irq_mask;
- reg->r_usb_status = status;
- reg->r_usb_epid_attn = epid_attn;
- reg->r_usb_rh_port_status_1 = port_status_1;
- reg->r_usb_rh_port_status_2 = port_status_2;
- reg->r_usb_fm_number = fm_number;
-
- INIT_WORK(&reg->usb_bh, etrax_usb_hc_interrupt_bottom_half, reg);
- schedule_work(&reg->usb_bh);
-
- DBFEXIT;
-
- return IRQ_HANDLED;
-}
-
-static void etrax_usb_hc_interrupt_bottom_half(void *data)
-{
- usb_interrupt_registers_t *reg = (usb_interrupt_registers_t *)data;
- __u32 irq_mask = reg->r_usb_irq_mask_read;
-
- DBFENTER;
-
- /* Interrupts are handled in order of priority. */
- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, epid_attn)) {
- etrax_usb_hc_epid_attn_interrupt(reg);
- }
- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, port_status)) {
- etrax_usb_hc_port_status_interrupt(reg);
- }
- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, ctl_status)) {
- etrax_usb_hc_ctl_status_interrupt(reg);
- }
- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, iso_eof)) {
- etrax_usb_hc_isoc_eof_interrupt();
- }
- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, bulk_eot)) {
- /* Update/restart the bulk start timer since obviously the channel is running. */
- mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL);
- /* Update/restart the bulk eot timer since we just received an bulk eot interrupt. */
- mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
-
- etrax_usb_hc_bulk_eot_interrupt(0);
- }
-
- kmem_cache_free(top_half_reg_cache, reg);
-
- DBFEXIT;
-}
-
-
-void etrax_usb_hc_isoc_eof_interrupt(void)
-{
- struct urb *urb;
- etrax_urb_priv_t *urb_priv;
- int epid;
- unsigned long flags;
-
- DBFENTER;
-
- /* Do not check the invalid epid (it has a valid sub pointer). */
- for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
-
- /* Do not check the invalid epid (it has a valid sub pointer). */
- if ((epid == DUMMY_EPID) || (epid == INVALID_EPID))
- continue;
-
- /* Disable interrupts to block the isoc out descriptor interrupt handler
- from being called while the isoc EPID list is being checked.
- */
- save_flags(flags);
- cli();
-
- if (TxIsocEPList[epid].sub == 0) {
- /* Nothing here to see. */
- restore_flags(flags);
- continue;
- }
-
- /* Get the first urb (if any). */
- urb = urb_list_first(epid);
- if (urb == 0) {
- warn("Ignoring NULL urb");
- restore_flags(flags);
- continue;
- }
- if (usb_pipein(urb->pipe)) {
-
- /* Sanity check. */
- assert(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
-
- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- assert(urb_priv);
-
- if (urb_priv->urb_state == NOT_STARTED) {
-
- /* If ASAP is not set and urb->start_frame is the current frame,
- start the transfer. */
- if (!(urb->transfer_flags & URB_ISO_ASAP) &&
- (urb->start_frame == (*R_USB_FM_NUMBER & 0x7ff))) {
-
- dbg_isoc("Enabling isoc IN EP descr for epid %d", epid);
- TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
-
- /* This urb is now active. */
- urb_priv->urb_state = STARTED;
- continue;
- }
- }
- }
- restore_flags(flags);
- }
-
- DBFEXIT;
-
-}
-
-void etrax_usb_hc_bulk_eot_interrupt(int timer_induced)
-{
- int epid;
-
- /* The technique is to run one urb at a time, wait for the eot interrupt at which
- point the EP descriptor has been disabled. */
-
- DBFENTER;
- dbg_bulk("bulk eot%s", timer_induced ? ", called by timer" : "");
-
- for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
-
- if (!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) &&
- (TxBulkEPList[epid].sub != 0)) {
-
- struct urb *urb;
- etrax_urb_priv_t *urb_priv;
- unsigned long flags;
- __u32 r_usb_ept_data;
-
- /* Found a disabled EP descriptor which has a non-null sub pointer.
- Verify that this ctrl EP descriptor got disabled no errors.
- FIXME: Necessary to check error_code? */
- dbg_bulk("for epid %d?", epid);
-
- /* Get the first urb. */
- urb = urb_list_first(epid);
-
- /* FIXME: Could this happen for valid reasons? Why did it disappear? Because of
- wrong unlinking? */
- if (!urb) {
- warn("NULL urb for epid %d", epid);
- continue;
- }
-
- assert(urb);
- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- assert(urb_priv);
-
- /* Sanity checks. */
- assert(usb_pipetype(urb->pipe) == PIPE_BULK);
- if (phys_to_virt(TxBulkEPList[epid].sub) != urb_priv->last_sb) {
- err("bulk endpoint got disabled before reaching last sb");
- }
-
- /* For bulk IN traffic, there seems to be a race condition between
- between the bulk eot and eop interrupts, or rather an uncertainty regarding
- the order in which they happen. Normally we expect the eop interrupt from
- DMA channel 9 to happen before the eot interrupt.
-
- Therefore, we complete the bulk IN urb in the rx interrupt handler instead. */
-
- if (usb_pipein(urb->pipe)) {
- dbg_bulk("in urb, continuing");
- continue;
- }
-
- save_flags(flags);
- cli();
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
- nop();
- r_usb_ept_data = *R_USB_EPT_DATA;
- restore_flags(flags);
-
- if (IO_EXTRACT(R_USB_EPT_DATA, error_code, r_usb_ept_data) ==
- IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
- /* This means that the endpoint has no error, is disabled
- and had inserted traffic, i.e. transfer successfully completed. */
- etrax_usb_complete_bulk_urb(urb, 0);
- } else {
- /* Shouldn't happen. We expect errors to be caught by epid attention. */
- err("Found disabled bulk EP desc, error_code != no_error");
- }
- }
- }
-
- /* Normally, we should find (at least) one disabled EP descriptor with a valid sub pointer.
- However, because of the uncertainty in the deliverance of the eop/eot interrupts, we may
- not. Also, we might find two disabled EPs when handling an eot interrupt, and then find
- none the next time. */
-
- DBFEXIT;
-
-}
-
-void etrax_usb_hc_epid_attn_interrupt(usb_interrupt_registers_t *reg)
-{
- /* This function handles the epid attention interrupt. There are a variety of reasons
- for this interrupt to happen (Designer's Reference, p. 8 - 22 for the details):
-
- invalid ep_id - Invalid epid in an EP (EP disabled).
- stall - Not strictly an error condition (EP disabled).
- 3rd error - Three successive transaction errors (EP disabled).
- buffer ourun - Buffer overrun or underrun (EP disabled).
- past eof1 - Intr or isoc transaction proceeds past EOF1.
- near eof - Intr or isoc transaction would not fit inside the frame.
- zout transfer - If zout transfer for a bulk endpoint (EP disabled).
- setup transfer - If setup transfer for a non-ctrl endpoint (EP disabled). */
-
- int epid;
-
-
- DBFENTER;
-
- assert(reg != NULL);
-
- /* Note that we loop through all epids. We still want to catch errors for
- the invalid one, even though we might handle them differently. */
- for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
-
- if (test_bit(epid, (void *)&reg->r_usb_epid_attn)) {
-
- struct urb *urb;
- __u32 r_usb_ept_data;
- unsigned long flags;
- int error_code;
-
- save_flags(flags);
- cli();
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
- nop();
- /* Note that although there are separate R_USB_EPT_DATA and R_USB_EPT_DATA_ISO
- registers, they are located at the same address and are of the same size.
- In other words, this read should be ok for isoc also. */
- r_usb_ept_data = *R_USB_EPT_DATA;
- restore_flags(flags);
-
- /* First some sanity checks. */
- if (epid == INVALID_EPID) {
- /* FIXME: What if it became disabled? Could seriously hurt interrupt
- traffic. (Use do_intr_recover.) */
- warn("Got epid_attn for INVALID_EPID (%d).", epid);
- err("R_USB_EPT_DATA = 0x%x", r_usb_ept_data);
- err("R_USB_STATUS = 0x%x", reg->r_usb_status);
- continue;
- } else if (epid == DUMMY_EPID) {
- /* We definitely don't care about these ones. Besides, they are
- always disabled, so any possible disabling caused by the
- epid attention interrupt is irrelevant. */
- warn("Got epid_attn for DUMMY_EPID (%d).", epid);
- continue;
- }
-
- /* Get the first urb in the urb list for this epid. We blatantly assume
- that only the first urb could have caused the epid attention.
- (For bulk and ctrl, only one urb is active at any one time. For intr
- and isoc we remove them once they are completed.) */
- urb = urb_list_first(epid);
-
- if (urb == NULL) {
- err("Got epid_attn for epid %i with no urb.", epid);
- err("R_USB_EPT_DATA = 0x%x", r_usb_ept_data);
- err("R_USB_STATUS = 0x%x", reg->r_usb_status);
- continue;
- }
-
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_BULK:
- warn("Got epid attn for bulk endpoint, epid %d", epid);
- break;
- case PIPE_CONTROL:
- warn("Got epid attn for control endpoint, epid %d", epid);
- break;
- case PIPE_INTERRUPT:
- warn("Got epid attn for interrupt endpoint, epid %d", epid);
- break;
- case PIPE_ISOCHRONOUS:
- warn("Got epid attn for isochronous endpoint, epid %d", epid);
- break;
- }
-
- if (usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) {
- if (r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, hold)) {
- warn("Hold was set for epid %d.", epid);
- continue;
- }
- }
-
- /* Even though error_code occupies bits 22 - 23 in both R_USB_EPT_DATA and
- R_USB_EPT_DATA_ISOC, we separate them here so we don't forget in other places. */
- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
- error_code = IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data);
- } else {
- error_code = IO_EXTRACT(R_USB_EPT_DATA, error_code, r_usb_ept_data);
- }
-
- /* Using IO_STATE_VALUE on R_USB_EPT_DATA should be ok for isoc also. */
- if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
-
- /* Isoc traffic doesn't have error_count_in/error_count_out. */
- if ((usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) &&
- (IO_EXTRACT(R_USB_EPT_DATA, error_count_in, r_usb_ept_data) == 3 ||
- IO_EXTRACT(R_USB_EPT_DATA, error_count_out, r_usb_ept_data) == 3)) {
- /* 3rd error. */
- warn("3rd error for epid %i", epid);
- etrax_usb_complete_urb(urb, -EPROTO);
-
- } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) {
-
- warn("Perror for epid %d", epid);
-
- if (!(r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, valid))) {
- /* invalid ep_id */
- panic("Perror because of invalid epid."
- " Deconfigured too early?");
- } else {
- /* past eof1, near eof, zout transfer, setup transfer */
-
- /* Dump the urb and the relevant EP descriptor list. */
-
- __dump_urb(urb);
- __dump_ept_data(epid);
- __dump_ep_list(usb_pipetype(urb->pipe));
-
- panic("Something wrong with DMA descriptor contents."
- " Too much traffic inserted?");
- }
- } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) {
- /* buffer ourun */
- panic("Buffer overrun/underrun for epid %d. DMA too busy?", epid);
- }
-
- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, stall)) {
- /* Not really a protocol error, just says that the endpoint gave
- a stall response. Note that error_code cannot be stall for isoc. */
- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
- panic("Isoc traffic cannot stall");
- }
-
- warn("Stall for epid %d", epid);
- etrax_usb_complete_urb(urb, -EPIPE);
-
- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, bus_error)) {
- /* Two devices responded to a transaction request. Must be resolved
- by software. FIXME: Reset ports? */
- panic("Bus error for epid %d."
- " Two devices responded to transaction request",
- epid);
-
- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, buffer_error)) {
- /* DMA overrun or underrun. */
- warn("Buffer overrun/underrun for epid %d. DMA too busy?", epid);
-
- /* It seems that error_code = buffer_error in
- R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS
- are the same error. */
- etrax_usb_complete_urb(urb, -EPROTO);
- }
- }
- }
-
- DBFEXIT;
-
-}
-
-void etrax_usb_bulk_start_timer_func(unsigned long dummy)
-{
-
- /* We might enable an EP descriptor behind the current DMA position when it's about
- to decide that there are no more bulk traffic and it should stop the bulk channel.
- Therefore we periodically check if the bulk channel is stopped and there is an
- enabled bulk EP descriptor, in which case we start the bulk channel. */
- dbg_bulk("bulk_start_timer timed out.");
-
- if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) {
- int epid;
-
- dbg_bulk("Bulk DMA channel not running.");
-
- for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
- if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
- dbg_bulk("Found enabled EP for epid %d, starting bulk channel.\n",
- epid);
- *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start);
-
- /* Restart the bulk eot timer since we just started the bulk channel. */
- mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
-
- /* No need to search any further. */
- break;
- }
- }
- } else {
- dbg_bulk("Bulk DMA channel running.");
- }
-}
-
-void etrax_usb_hc_port_status_interrupt(usb_interrupt_registers_t *reg)
-{
- etrax_hc_t *hc = reg->hc;
- __u16 r_usb_rh_port_status_1 = reg->r_usb_rh_port_status_1;
- __u16 r_usb_rh_port_status_2 = reg->r_usb_rh_port_status_2;
-
- DBFENTER;
-
- /* The Etrax RH does not include a wPortChange register, so this has to be handled in software
- (by saving the old port status value for comparison when the port status interrupt happens).
- See section 11.16.2.6.2 in the USB 1.1 spec for details. */
-
- dbg_rh("hc->rh.prev_wPortStatus_1 = 0x%x", hc->rh.prev_wPortStatus_1);
- dbg_rh("hc->rh.prev_wPortStatus_2 = 0x%x", hc->rh.prev_wPortStatus_2);
- dbg_rh("r_usb_rh_port_status_1 = 0x%x", r_usb_rh_port_status_1);
- dbg_rh("r_usb_rh_port_status_2 = 0x%x", r_usb_rh_port_status_2);
-
- /* C_PORT_CONNECTION is set on any transition. */
- hc->rh.wPortChange_1 |=
- ((r_usb_rh_port_status_1 & (1 << RH_PORT_CONNECTION)) !=
- (hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_CONNECTION))) ?
- (1 << RH_PORT_CONNECTION) : 0;
-
- hc->rh.wPortChange_2 |=
- ((r_usb_rh_port_status_2 & (1 << RH_PORT_CONNECTION)) !=
- (hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_CONNECTION))) ?
- (1 << RH_PORT_CONNECTION) : 0;
-
- /* C_PORT_ENABLE is _only_ set on a one to zero transition, i.e. when
- the port is disabled, not when it's enabled. */
- hc->rh.wPortChange_1 |=
- ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_ENABLE))
- && !(r_usb_rh_port_status_1 & (1 << RH_PORT_ENABLE))) ?
- (1 << RH_PORT_ENABLE) : 0;
-
- hc->rh.wPortChange_2 |=
- ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_ENABLE))
- && !(r_usb_rh_port_status_2 & (1 << RH_PORT_ENABLE))) ?
- (1 << RH_PORT_ENABLE) : 0;
-
- /* C_PORT_SUSPEND is set to one when the device has transitioned out
- of the suspended state, i.e. when suspend goes from one to zero. */
- hc->rh.wPortChange_1 |=
- ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_SUSPEND))
- && !(r_usb_rh_port_status_1 & (1 << RH_PORT_SUSPEND))) ?
- (1 << RH_PORT_SUSPEND) : 0;
-
- hc->rh.wPortChange_2 |=
- ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_SUSPEND))
- && !(r_usb_rh_port_status_2 & (1 << RH_PORT_SUSPEND))) ?
- (1 << RH_PORT_SUSPEND) : 0;
-
-
- /* C_PORT_RESET is set when reset processing on this port is complete. */
- hc->rh.wPortChange_1 |=
- ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_RESET))
- && !(r_usb_rh_port_status_1 & (1 << RH_PORT_RESET))) ?
- (1 << RH_PORT_RESET) : 0;
-
- hc->rh.wPortChange_2 |=
- ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_RESET))
- && !(r_usb_rh_port_status_2 & (1 << RH_PORT_RESET))) ?
- (1 << RH_PORT_RESET) : 0;
-
- /* Save the new values for next port status change. */
- hc->rh.prev_wPortStatus_1 = r_usb_rh_port_status_1;
- hc->rh.prev_wPortStatus_2 = r_usb_rh_port_status_2;
-
- dbg_rh("hc->rh.wPortChange_1 set to 0x%x", hc->rh.wPortChange_1);
- dbg_rh("hc->rh.wPortChange_2 set to 0x%x", hc->rh.wPortChange_2);
-
- DBFEXIT;
-
-}
-
-void etrax_usb_hc_ctl_status_interrupt(usb_interrupt_registers_t *reg)
-{
- DBFENTER;
-
- /* FIXME: What should we do if we get ourun or perror? Dump the EP and SB
- list for the corresponding epid? */
- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) {
- panic("USB controller got ourun.");
- }
- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) {
-
- /* Before, etrax_usb_do_intr_recover was called on this epid if it was
- an interrupt pipe. I don't see how re-enabling all EP descriptors
- will help if there was a programming error. */
- panic("USB controller got perror.");
- }
-
- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, device_mode)) {
- /* We should never operate in device mode. */
- panic("USB controller in device mode.");
- }
-
- /* These if-statements could probably be nested. */
- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, host_mode)) {
- info("USB controller in host mode.");
- }
- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, started)) {
- info("USB controller started.");
- }
- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, running)) {
- info("USB controller running.");
- }
-
- DBFEXIT;
-
-}
-
-
-static int etrax_rh_submit_urb(struct urb *urb)
-{
- struct usb_device *usb_dev = urb->dev;
- etrax_hc_t *hc = usb_dev->bus->hcpriv;
- unsigned int pipe = urb->pipe;
- struct usb_ctrlrequest *cmd = (struct usb_ctrlrequest *) urb->setup_packet;
- void *data = urb->transfer_buffer;
- int leni = urb->transfer_buffer_length;
- int len = 0;
- int stat = 0;
-
- __u16 bmRType_bReq;
- __u16 wValue;
- __u16 wIndex;
- __u16 wLength;
-
- DBFENTER;
-
- /* FIXME: What is this interrupt urb that is sent to the root hub? */
- if (usb_pipetype (pipe) == PIPE_INTERRUPT) {
- dbg_rh("Root-Hub submit IRQ: every %d ms", urb->interval);
- hc->rh.urb = urb;
- hc->rh.send = 1;
- /* FIXME: We could probably remove this line since it's done
- in etrax_rh_init_int_timer. (Don't remove it from
- etrax_rh_init_int_timer though.) */
- hc->rh.interval = urb->interval;
- etrax_rh_init_int_timer(urb);
- DBFEXIT;
-
- return 0;
- }
-
- bmRType_bReq = cmd->bRequestType | (cmd->bRequest << 8);
- wValue = le16_to_cpu(cmd->wValue);
- wIndex = le16_to_cpu(cmd->wIndex);
- wLength = le16_to_cpu(cmd->wLength);
-
- dbg_rh("bmRType_bReq : 0x%04x (%d)", bmRType_bReq, bmRType_bReq);
- dbg_rh("wValue : 0x%04x (%d)", wValue, wValue);
- dbg_rh("wIndex : 0x%04x (%d)", wIndex, wIndex);
- dbg_rh("wLength : 0x%04x (%d)", wLength, wLength);
-
- switch (bmRType_bReq) {
-
- /* Request Destination:
- without flags: Device,
- RH_INTERFACE: interface,
- RH_ENDPOINT: endpoint,
- RH_CLASS means HUB here,
- RH_OTHER | RH_CLASS almost ever means HUB_PORT here
- */
-
- case RH_GET_STATUS:
- *(__u16 *) data = cpu_to_le16 (1);
- OK (2);
-
- case RH_GET_STATUS | RH_INTERFACE:
- *(__u16 *) data = cpu_to_le16 (0);
- OK (2);
-
- case RH_GET_STATUS | RH_ENDPOINT:
- *(__u16 *) data = cpu_to_le16 (0);
- OK (2);
-
- case RH_GET_STATUS | RH_CLASS:
- *(__u32 *) data = cpu_to_le32 (0);
- OK (4); /* hub power ** */
-
- case RH_GET_STATUS | RH_OTHER | RH_CLASS:
- if (wIndex == 1) {
- *((__u16*)data) = cpu_to_le16(hc->rh.prev_wPortStatus_1);
- *((__u16*)data + 1) = cpu_to_le16(hc->rh.wPortChange_1);
- } else if (wIndex == 2) {
- *((__u16*)data) = cpu_to_le16(hc->rh.prev_wPortStatus_2);
- *((__u16*)data + 1) = cpu_to_le16(hc->rh.wPortChange_2);
- } else {
- dbg_rh("RH_GET_STATUS whith invalid wIndex!");
- OK(0);
- }
-
- OK(4);
-
- case RH_CLEAR_FEATURE | RH_ENDPOINT:
- switch (wValue) {
- case (RH_ENDPOINT_STALL):
- OK (0);
- }
- break;
-
- case RH_CLEAR_FEATURE | RH_CLASS:
- switch (wValue) {
- case (RH_C_HUB_OVER_CURRENT):
- OK (0); /* hub power over current ** */
- }
- break;
-
- case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
- switch (wValue) {
- case (RH_PORT_ENABLE):
- if (wIndex == 1) {
-
- dbg_rh("trying to do disable port 1");
-
- *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, yes);
-
- while (hc->rh.prev_wPortStatus_1 &
- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes));
- *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no);
- dbg_rh("Port 1 is disabled");
-
- } else if (wIndex == 2) {
-
- dbg_rh("trying to do disable port 2");
-
- *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, yes);
-
- while (hc->rh.prev_wPortStatus_2 &
- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, yes));
- *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no);
- dbg_rh("Port 2 is disabled");
-
- } else {
- dbg_rh("RH_CLEAR_FEATURE->RH_PORT_ENABLE "
- "with invalid wIndex == %d!", wIndex);
- }
-
- OK (0);
- case (RH_PORT_SUSPEND):
- /* Opposite to suspend should be resume, so we'll do a resume. */
- /* FIXME: USB 1.1, 11.16.2.2 says:
- "Clearing the PORT_SUSPEND feature causes a host-initiated resume
- on the specified port. If the port is not in the Suspended state,
- the hub should treat this request as a functional no-operation."
- Shouldn't we check if the port is in a suspended state before
- resuming? */
-
- /* Make sure the controller isn't busy. */
- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
-
- if (wIndex == 1) {
- *R_USB_COMMAND =
- IO_STATE(R_USB_COMMAND, port_sel, port1) |
- IO_STATE(R_USB_COMMAND, port_cmd, resume) |
- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
- } else if (wIndex == 2) {
- *R_USB_COMMAND =
- IO_STATE(R_USB_COMMAND, port_sel, port2) |
- IO_STATE(R_USB_COMMAND, port_cmd, resume) |
- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
- } else {
- dbg_rh("RH_CLEAR_FEATURE->RH_PORT_SUSPEND "
- "with invalid wIndex == %d!", wIndex);
- }
-
- OK (0);
- case (RH_PORT_POWER):
- OK (0); /* port power ** */
- case (RH_C_PORT_CONNECTION):
- if (wIndex == 1) {
- hc->rh.wPortChange_1 &= ~(1 << RH_PORT_CONNECTION);
- } else if (wIndex == 2) {
- hc->rh.wPortChange_2 &= ~(1 << RH_PORT_CONNECTION);
- } else {
- dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_CONNECTION "
- "with invalid wIndex == %d!", wIndex);
- }
-
- OK (0);
- case (RH_C_PORT_ENABLE):
- if (wIndex == 1) {
- hc->rh.wPortChange_1 &= ~(1 << RH_PORT_ENABLE);
- } else if (wIndex == 2) {
- hc->rh.wPortChange_2 &= ~(1 << RH_PORT_ENABLE);
- } else {
- dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_ENABLE "
- "with invalid wIndex == %d!", wIndex);
- }
- OK (0);
- case (RH_C_PORT_SUSPEND):
-/*** WR_RH_PORTSTAT(RH_PS_PSSC); */
- OK (0);
- case (RH_C_PORT_OVER_CURRENT):
- OK (0); /* port power over current ** */
- case (RH_C_PORT_RESET):
- if (wIndex == 1) {
- hc->rh.wPortChange_1 &= ~(1 << RH_PORT_RESET);
- } else if (wIndex == 2) {
- hc->rh.wPortChange_2 &= ~(1 << RH_PORT_RESET);
- } else {
- dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_RESET "
- "with invalid index == %d!", wIndex);
- }
-
- OK (0);
-
- }
- break;
-
- case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
- switch (wValue) {
- case (RH_PORT_SUSPEND):
-
- /* Make sure the controller isn't busy. */
- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
-
- if (wIndex == 1) {
- *R_USB_COMMAND =
- IO_STATE(R_USB_COMMAND, port_sel, port1) |
- IO_STATE(R_USB_COMMAND, port_cmd, suspend) |
- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
- } else if (wIndex == 2) {
- *R_USB_COMMAND =
- IO_STATE(R_USB_COMMAND, port_sel, port2) |
- IO_STATE(R_USB_COMMAND, port_cmd, suspend) |
- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
- } else {
- dbg_rh("RH_SET_FEATURE->RH_PORT_SUSPEND "
- "with invalid wIndex == %d!", wIndex);
- }
-
- OK (0);
- case (RH_PORT_RESET):
- if (wIndex == 1) {
-
- port_1_reset:
- dbg_rh("Doing reset of port 1");
-
- /* Make sure the controller isn't busy. */
- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
-
- *R_USB_COMMAND =
- IO_STATE(R_USB_COMMAND, port_sel, port1) |
- IO_STATE(R_USB_COMMAND, port_cmd, reset) |
- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
-
- /* We must wait at least 10 ms for the device to recover.
- 15 ms should be enough. */
- udelay(15000);
-
- /* Wait for reset bit to go low (should be done by now). */
- while (hc->rh.prev_wPortStatus_1 &
- IO_STATE(R_USB_RH_PORT_STATUS_1, reset, yes));
-
- /* If the port status is
- 1) connected and enabled then there is a device and everything is fine
- 2) neither connected nor enabled then there is no device, also fine
- 3) connected and not enabled then we try again
- (Yes, there are other port status combinations besides these.) */
-
- if ((hc->rh.prev_wPortStatus_1 &
- IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) &&
- (hc->rh.prev_wPortStatus_1 &
- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no))) {
- dbg_rh("Connected device on port 1, but port not enabled?"
- " Trying reset again.");
- goto port_2_reset;
- }
-
- /* Diagnostic printouts. */
- if ((hc->rh.prev_wPortStatus_1 &
- IO_STATE(R_USB_RH_PORT_STATUS_1, connected, no)) &&
- (hc->rh.prev_wPortStatus_1 &
- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no))) {
- dbg_rh("No connected device on port 1");
- } else if ((hc->rh.prev_wPortStatus_1 &
- IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) &&
- (hc->rh.prev_wPortStatus_1 &
- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes))) {
- dbg_rh("Connected device on port 1, port 1 enabled");
- }
-
- } else if (wIndex == 2) {
-
- port_2_reset:
- dbg_rh("Doing reset of port 2");
-
- /* Make sure the controller isn't busy. */
- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
-
- /* Issue the reset command. */
- *R_USB_COMMAND =
- IO_STATE(R_USB_COMMAND, port_sel, port2) |
- IO_STATE(R_USB_COMMAND, port_cmd, reset) |
- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
-
- /* We must wait at least 10 ms for the device to recover.
- 15 ms should be enough. */
- udelay(15000);
-
- /* Wait for reset bit to go low (should be done by now). */
- while (hc->rh.prev_wPortStatus_2 &
- IO_STATE(R_USB_RH_PORT_STATUS_2, reset, yes));
-
- /* If the port status is
- 1) connected and enabled then there is a device and everything is fine
- 2) neither connected nor enabled then there is no device, also fine
- 3) connected and not enabled then we try again
- (Yes, there are other port status combinations besides these.) */
-
- if ((hc->rh.prev_wPortStatus_2 &
- IO_STATE(R_USB_RH_PORT_STATUS_2, connected, yes)) &&
- (hc->rh.prev_wPortStatus_2 &
- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no))) {
- dbg_rh("Connected device on port 2, but port not enabled?"
- " Trying reset again.");
- goto port_2_reset;
- }
-
- /* Diagnostic printouts. */
- if ((hc->rh.prev_wPortStatus_2 &
- IO_STATE(R_USB_RH_PORT_STATUS_2, connected, no)) &&
- (hc->rh.prev_wPortStatus_2 &
- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no))) {
- dbg_rh("No connected device on port 2");
- } else if ((hc->rh.prev_wPortStatus_2 &
- IO_STATE(R_USB_RH_PORT_STATUS_2, connected, yes)) &&
- (hc->rh.prev_wPortStatus_2 &
- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, yes))) {
- dbg_rh("Connected device on port 2, port 2 enabled");
- }
-
- } else {
- dbg_rh("RH_SET_FEATURE->RH_PORT_RESET with invalid wIndex = %d", wIndex);
- }
-
- /* Make sure the controller isn't busy. */
- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
-
- /* If all enabled ports were disabled the host controller goes down into
- started mode, so we need to bring it back into the running state.
- (This is safe even if it's already in the running state.) */
- *R_USB_COMMAND =
- IO_STATE(R_USB_COMMAND, port_sel, nop) |
- IO_STATE(R_USB_COMMAND, port_cmd, reset) |
- IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
-
- dbg_rh("...Done");
- OK(0);
-
- case (RH_PORT_POWER):
- OK (0); /* port power ** */
- case (RH_PORT_ENABLE):
- /* There is no port enable command in the host controller, so if the
- port is already enabled, we do nothing. If not, we reset the port
- (with an ugly goto). */
-
- if (wIndex == 1) {
- if (hc->rh.prev_wPortStatus_1 &
- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no)) {
- goto port_1_reset;
- }
- } else if (wIndex == 2) {
- if (hc->rh.prev_wPortStatus_2 &
- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no)) {
- goto port_2_reset;
- }
- } else {
- dbg_rh("RH_SET_FEATURE->RH_GET_STATUS with invalid wIndex = %d", wIndex);
- }
- OK (0);
- }
- break;
-
- case RH_SET_ADDRESS:
- hc->rh.devnum = wValue;
- dbg_rh("RH address set to: %d", hc->rh.devnum);
- OK (0);
-
- case RH_GET_DESCRIPTOR:
- switch ((wValue & 0xff00) >> 8) {
- case (0x01): /* device descriptor */
- len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_dev_des), wLength));
- memcpy (data, root_hub_dev_des, len);
- OK (len);
- case (0x02): /* configuration descriptor */
- len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_config_des), wLength));
- memcpy (data, root_hub_config_des, len);
- OK (len);
- case (0x03): /* string descriptors */
- len = usb_root_hub_string (wValue & 0xff,
- 0xff, "ETRAX 100LX",
- data, wLength);
- if (len > 0) {
- OK(min(leni, len));
- } else {
- stat = -EPIPE;
- }
-
- }
- break;
-
- case RH_GET_DESCRIPTOR | RH_CLASS:
- root_hub_hub_des[2] = hc->rh.numports;
- len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_hub_des), wLength));
- memcpy (data, root_hub_hub_des, len);
- OK (len);
-
- case RH_GET_CONFIGURATION:
- *(__u8 *) data = 0x01;
- OK (1);
-
- case RH_SET_CONFIGURATION:
- OK (0);
-
- default:
- stat = -EPIPE;
- }
-
- urb->actual_length = len;
- urb->status = stat;
- urb->dev = NULL;
- if (urb->complete) {
- urb->complete(urb, NULL);
- }
- DBFEXIT;
-
- return 0;
-}
-
-static void
-etrax_usb_bulk_eot_timer_func(unsigned long dummy)
-{
- /* Because of a race condition in the top half, we might miss a bulk eot.
- This timer "simulates" a bulk eot if we don't get one for a while, hopefully
- correcting the situation. */
- dbg_bulk("bulk_eot_timer timed out.");
- etrax_usb_hc_bulk_eot_interrupt(1);
-}
-
-static void*
-etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size,
- unsigned mem_flags, dma_addr_t *dma)
-{
- return kmalloc(size, mem_flags);
-}
-
-static void
-etrax_usb_buffer_free(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma)
-{
- kfree(addr);
-}
-
-
-static struct device fake_device;
-
-static int __init etrax_usb_hc_init(void)
-{
- static etrax_hc_t *hc;
- struct usb_bus *bus;
- struct usb_device *usb_rh;
- int i;
-
- DBFENTER;
-
- info("ETRAX 100LX USB-HCD %s (c) 2001-2003 Axis Communications AB\n", usb_hcd_version);
-
- hc = kmalloc(sizeof(etrax_hc_t), GFP_KERNEL);
- assert(hc != NULL);
-
- /* We use kmem_cache_* to make sure that all DMA desc. are dword aligned */
- /* Note that we specify sizeof(USB_EP_Desc_t) as the size, but also allocate
- SB descriptors from this cache. This is ok since sizeof(USB_EP_Desc_t) ==
- sizeof(USB_SB_Desc_t). */
-
- usb_desc_cache = kmem_cache_create("usb_desc_cache", sizeof(USB_EP_Desc_t), 0,
- SLAB_HWCACHE_ALIGN, 0, 0);
- assert(usb_desc_cache != NULL);
-
- top_half_reg_cache = kmem_cache_create("top_half_reg_cache",
- sizeof(usb_interrupt_registers_t),
- 0, SLAB_HWCACHE_ALIGN, 0, 0);
- assert(top_half_reg_cache != NULL);
-
- isoc_compl_cache = kmem_cache_create("isoc_compl_cache",
- sizeof(usb_isoc_complete_data_t),
- 0, SLAB_HWCACHE_ALIGN, 0, 0);
- assert(isoc_compl_cache != NULL);
-
- etrax_usb_bus = bus = usb_alloc_bus(&etrax_usb_device_operations);
- hc->bus = bus;
- bus->bus_name="ETRAX 100LX";
- bus->hcpriv = hc;
-
- /* Initialize RH to the default address.
- And make sure that we have no status change indication */
- hc->rh.numports = 2; /* The RH has two ports */
- hc->rh.devnum = 1;
- hc->rh.wPortChange_1 = 0;
- hc->rh.wPortChange_2 = 0;
-
- /* Also initate the previous values to zero */
- hc->rh.prev_wPortStatus_1 = 0;
- hc->rh.prev_wPortStatus_2 = 0;
-
- /* Initialize the intr-traffic flags */
- /* FIXME: This isn't used. (Besides, the error field isn't initialized.) */
- hc->intr.sleeping = 0;
- hc->intr.wq = NULL;
-
- epid_usage_bitmask = 0;
- epid_out_traffic = 0;
-
- /* Mark the invalid epid as being used. */
- set_bit(INVALID_EPID, (void *)&epid_usage_bitmask);
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, INVALID_EPID);
- nop();
- /* The valid bit should still be set ('invalid' is in our world; not the hardware's). */
- *R_USB_EPT_DATA = (IO_STATE(R_USB_EPT_DATA, valid, yes) |
- IO_FIELD(R_USB_EPT_DATA, max_len, 1));
-
- /* Mark the dummy epid as being used. */
- set_bit(DUMMY_EPID, (void *)&epid_usage_bitmask);
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, DUMMY_EPID);
- nop();
- *R_USB_EPT_DATA = (IO_STATE(R_USB_EPT_DATA, valid, no) |
- IO_FIELD(R_USB_EPT_DATA, max_len, 1));
-
- /* Initialize the urb list by initiating a head for each list. */
- for (i = 0; i < NBR_OF_EPIDS; i++) {
- INIT_LIST_HEAD(&urb_list[i]);
- }
- spin_lock_init(&urb_list_lock);
-
- INIT_LIST_HEAD(&urb_unlink_list);
-
-
- /* Initiate the bulk start timer. */
- init_timer(&bulk_start_timer);
- bulk_start_timer.expires = jiffies + BULK_START_TIMER_INTERVAL;
- bulk_start_timer.function = etrax_usb_bulk_start_timer_func;
- add_timer(&bulk_start_timer);
-
-
- /* Initiate the bulk eot timer. */
- init_timer(&bulk_eot_timer);
- bulk_eot_timer.expires = jiffies + BULK_EOT_TIMER_INTERVAL;
- bulk_eot_timer.function = etrax_usb_bulk_eot_timer_func;
- add_timer(&bulk_eot_timer);
-
- /* Set up the data structures for USB traffic. Note that this must be done before
- any interrupt that relies on sane DMA list occurrs. */
- init_rx_buffers();
- init_tx_bulk_ep();
- init_tx_ctrl_ep();
- init_tx_intr_ep();
- init_tx_isoc_ep();
-
- device_initialize(&fake_device);
- kobject_set_name(&fake_device.kobj, "etrax_usb");
- kobject_add(&fake_device.kobj);
- kobject_uevent(&fake_device.kobj, KOBJ_ADD);
- hc->bus->controller = &fake_device;
- usb_register_bus(hc->bus);
-
- *R_IRQ_MASK2_SET =
- /* Note that these interrupts are not used. */
- IO_STATE(R_IRQ_MASK2_SET, dma8_sub0_descr, set) |
- /* Sub channel 1 (ctrl) descr. interrupts are used. */
- IO_STATE(R_IRQ_MASK2_SET, dma8_sub1_descr, set) |
- IO_STATE(R_IRQ_MASK2_SET, dma8_sub2_descr, set) |
- /* Sub channel 3 (isoc) descr. interrupts are used. */
- IO_STATE(R_IRQ_MASK2_SET, dma8_sub3_descr, set);
-
- /* Note that the dma9_descr interrupt is not used. */
- *R_IRQ_MASK2_SET =
- IO_STATE(R_IRQ_MASK2_SET, dma9_eop, set) |
- IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set);
-
- /* FIXME: Enable iso_eof only when isoc traffic is running. */
- *R_USB_IRQ_MASK_SET =
- IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set) |
- IO_STATE(R_USB_IRQ_MASK_SET, bulk_eot, set) |
- IO_STATE(R_USB_IRQ_MASK_SET, epid_attn, set) |
- IO_STATE(R_USB_IRQ_MASK_SET, port_status, set) |
- IO_STATE(R_USB_IRQ_MASK_SET, ctl_status, set);
-
-
- if (request_irq(ETRAX_USB_HC_IRQ, etrax_usb_hc_interrupt_top_half, 0,
- "ETRAX 100LX built-in USB (HC)", hc)) {
- err("Could not allocate IRQ %d for USB", ETRAX_USB_HC_IRQ);
- etrax_usb_hc_cleanup();
- DBFEXIT;
- return -1;
- }
-
- if (request_irq(ETRAX_USB_RX_IRQ, etrax_usb_rx_interrupt, 0,
- "ETRAX 100LX built-in USB (Rx)", hc)) {
- err("Could not allocate IRQ %d for USB", ETRAX_USB_RX_IRQ);
- etrax_usb_hc_cleanup();
- DBFEXIT;
- return -1;
- }
-
- if (request_irq(ETRAX_USB_TX_IRQ, etrax_usb_tx_interrupt, 0,
- "ETRAX 100LX built-in USB (Tx)", hc)) {
- err("Could not allocate IRQ %d for USB", ETRAX_USB_TX_IRQ);
- etrax_usb_hc_cleanup();
- DBFEXIT;
- return -1;
- }
-
- /* R_USB_COMMAND:
- USB commands in host mode. The fields in this register should all be
- written to in one write. Do not read-modify-write one field at a time. A
- write to this register will trigger events in the USB controller and an
- incomplete command may lead to unpredictable results, and in worst case
- even to a deadlock in the controller.
- (Note however that the busy field is read-only, so no need to write to it.) */
-
- /* Check the busy bit before writing to R_USB_COMMAND. */
-
- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
-
- /* Reset the USB interface. */
- *R_USB_COMMAND =
- IO_STATE(R_USB_COMMAND, port_sel, nop) |
- IO_STATE(R_USB_COMMAND, port_cmd, reset) |
- IO_STATE(R_USB_COMMAND, ctrl_cmd, reset);
-
- /* Designer's Reference, p. 8 - 10 says we should Initate R_USB_FM_PSTART to 0x2A30 (10800),
- to guarantee that control traffic gets 10% of the bandwidth, and periodic transfer may
- allocate the rest (90%). This doesn't work though. Read on for a lenghty explanation.
-
- While there is a difference between rev. 2 and rev. 3 of the ETRAX 100LX regarding the NAK
- behaviour, it doesn't solve this problem. What happens is that a control transfer will not
- be interrupted in its data stage when PSTART happens (the point at which periodic traffic
- is started). Thus, if PSTART is set to 10800 and its IN or OUT token is NAKed until just before
- PSTART happens, it will continue the IN/OUT transfer as long as it's ACKed. After it's done,
- there may be too little time left for an isochronous transfer, causing an epid attention
- interrupt due to perror. The work-around for this is to let the control transfers run at the
- end of the frame instead of at the beginning, and will be interrupted just fine if it doesn't
- fit into the frame. However, since there will *always* be a control transfer at the beginning
- of the frame, regardless of what we set PSTART to, that transfer might be a 64-byte transfer
- which consumes up to 15% of the frame, leaving only 85% for periodic traffic. The solution to
- this would be to 'dummy allocate' 5% of the frame with the usb_claim_bandwidth function to make
- sure that the periodic transfers that are inserted will always fit in the frame.
-
- The idea was suggested that a control transfer could be split up into several 8 byte transfers,
- so that it would be interrupted by PSTART, but since this can't be done for an IN transfer this
- hasn't been implemented.
-
- The value 11960 is chosen to be just after the SOF token, with a couple of bit times extra
- for possible bit stuffing. */
-
- *R_USB_FM_PSTART = IO_FIELD(R_USB_FM_PSTART, value, 11960);
-
-#ifdef CONFIG_ETRAX_USB_HOST_PORT1
- *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no);
-#endif
-
-#ifdef CONFIG_ETRAX_USB_HOST_PORT2
- *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no);
-#endif
-
- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
-
- /* Configure the USB interface as a host controller. */
- *R_USB_COMMAND =
- IO_STATE(R_USB_COMMAND, port_sel, nop) |
- IO_STATE(R_USB_COMMAND, port_cmd, reset) |
- IO_STATE(R_USB_COMMAND, ctrl_cmd, host_config);
-
- /* Note: Do not reset any ports here. Await the port status interrupts, to have a controlled
- sequence of resetting the ports. If we reset both ports now, and there are devices
- on both ports, we will get a bus error because both devices will answer the set address
- request. */
-
- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
-
- /* Start processing of USB traffic. */
- *R_USB_COMMAND =
- IO_STATE(R_USB_COMMAND, port_sel, nop) |
- IO_STATE(R_USB_COMMAND, port_cmd, reset) |
- IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
-
- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
-
- usb_rh = usb_alloc_dev(NULL, hc->bus, 0);
- hc->bus->root_hub = usb_rh;
- usb_rh->state = USB_STATE_ADDRESS;
- usb_rh->speed = USB_SPEED_FULL;
- usb_rh->devnum = 1;
- hc->bus->devnum_next = 2;
- usb_rh->ep0.desc.wMaxPacketSize = __const_cpu_to_le16(64);
- usb_get_device_descriptor(usb_rh, USB_DT_DEVICE_SIZE);
- usb_new_device(usb_rh);
-
- DBFEXIT;
-
- return 0;
-}
-
-static void etrax_usb_hc_cleanup(void)
-{
- DBFENTER;
-
- free_irq(ETRAX_USB_HC_IRQ, NULL);
- free_irq(ETRAX_USB_RX_IRQ, NULL);
- free_irq(ETRAX_USB_TX_IRQ, NULL);
-
- usb_deregister_bus(etrax_usb_bus);
-
- /* FIXME: call kmem_cache_destroy here? */
-
- DBFEXIT;
-}
-module_init(etrax_usb_hc_init);
-module_exit(etrax_usb_hc_cleanup);
+/* Module hooks */
+module_init(module_hcd_init);
+module_exit(module_hcd_exit);
--- linux-2.6.19.2.orig/drivers/usb/host/hc-crisv10.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2.dev/drivers/usb/host/hc-crisv10.c 2007-02-26 20:58:29.000000000 +0100
@@ -0,0 +1,4684 @@
+/*
+ *
+ * ETRAX 100LX USB Host Controller Driver
+ *
+ * Copyright (C) 2005, 2006 Axis Communications AB
+ *
+ * Author: Konrad Eriksson <konrad.eriksson@axis.se>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/io_interface_mux.h>
+
+#include "../core/hcd.h"
+#include "../core/hub.h"
+#include "hc-crisv10.h"
+#include "hc-cris-dbg.h"
+
+
+/***************************************************************************/
+/***************************************************************************/
+/* Host Controller settings */
+/***************************************************************************/
+/***************************************************************************/
+
+#define VERSION "1.00"
+#define COPYRIGHT "(c) 2005, 2006 Axis Communications AB"
+#define DESCRIPTION "ETRAX 100LX USB Host Controller"
+
+#define ETRAX_USB_HC_IRQ USB_HC_IRQ_NBR
+#define ETRAX_USB_RX_IRQ USB_DMA_RX_IRQ_NBR
+#define ETRAX_USB_TX_IRQ USB_DMA_TX_IRQ_NBR
+
+/* Number of physical ports in Etrax 100LX */
+#define USB_ROOT_HUB_PORTS 2
+
+const char hc_name[] = "hc-crisv10";
+const char product_desc[] = DESCRIPTION;
+
+/* The number of epids is, among other things, used for pre-allocating
+ ctrl, bulk and isoc EP descriptors (one for each epid).
+ Assumed to be > 1 when initiating the DMA lists. */
+#define NBR_OF_EPIDS 32
+
+/* Support interrupt traffic intervals up to 128 ms. */
+#define MAX_INTR_INTERVAL 128
+
+/* If periodic traffic (intr or isoc) is to be used, then one entry in the EP
+ table must be "invalid". By this we mean that we shouldn't care about epid
+ attentions for this epid, or at least handle them differently from epid
+ attentions for "valid" epids. This define determines which one to use
+ (don't change it). */
+#define INVALID_EPID 31
+/* A special epid for the bulk dummys. */
+#define DUMMY_EPID 30
+
+/* Module settings */
+
+MODULE_DESCRIPTION(DESCRIPTION);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Konrad Eriksson <konrad.eriksson@axis.se>");
+
+
+/* Module parameters */
+
+/* 0 = No ports enabled
+ 1 = Only port 1 enabled (on board ethernet on devboard)
+ 2 = Only port 2 enabled (external connector on devboard)
+ 3 = Both ports enabled
+*/
+static unsigned int ports = 3;
+module_param(ports, uint, S_IRUGO);
+MODULE_PARM_DESC(ports, "Bitmask indicating USB ports to use");
+
+
+/***************************************************************************/
+/***************************************************************************/
+/* Shared global variables for this module */
+/***************************************************************************/
+/***************************************************************************/
+
+/* EP descriptor lists for non period transfers. Must be 32-bit aligned. */
+static volatile struct USB_EP_Desc TxBulkEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
+
+static volatile struct USB_EP_Desc TxCtrlEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
+
+/* EP descriptor lists for period transfers. Must be 32-bit aligned. */
+static volatile struct USB_EP_Desc TxIntrEPList[MAX_INTR_INTERVAL] __attribute__ ((aligned (4)));
+static volatile struct USB_SB_Desc TxIntrSB_zout __attribute__ ((aligned (4)));
+
+static volatile struct USB_EP_Desc TxIsocEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
+static volatile struct USB_SB_Desc TxIsocSB_zout __attribute__ ((aligned (4)));
+
+static volatile struct USB_SB_Desc TxIsocSBList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
+
+/* After each enabled bulk EP IN we put two disabled EP descriptors with the eol flag set,
+ causing the DMA to stop the DMA channel. The first of these two has the intr flag set, which
+ gives us a dma8_sub0_descr interrupt. When we receive this, we advance the DMA one step in the
+ EP list and then restart the bulk channel, thus forcing a switch between bulk EP descriptors
+ in each frame. */
+static volatile struct USB_EP_Desc TxBulkDummyEPList[NBR_OF_EPIDS][2] __attribute__ ((aligned (4)));
+
+/* List of URB pointers, where each points to the active URB for a epid.
+ For Bulk, Ctrl and Intr this means which URB that currently is added to
+ DMA lists (Isoc URBs are all directly added to DMA lists). As soon as
+ URB has completed is the queue examined and the first URB in queue is
+ removed and moved to the activeUrbList while its state change to STARTED and
+ its transfer(s) gets added to DMA list (exception Isoc where URBs enter
+ state STARTED directly and added transfers added to DMA lists). */
+static struct urb *activeUrbList[NBR_OF_EPIDS];
+
+/* Additional software state info for each epid */
+static struct etrax_epid epid_state[NBR_OF_EPIDS];
+
+/* Timer handles for bulk traffic timer used to avoid DMA bug where DMA stops
+ even if there is new data waiting to be processed */
+static struct timer_list bulk_start_timer = TIMER_INITIALIZER(NULL, 0, 0);
+static struct timer_list bulk_eot_timer = TIMER_INITIALIZER(NULL, 0, 0);
+
+/* We want the start timer to expire before the eot timer, because the former
+ might start traffic, thus making it unnecessary for the latter to time
+ out. */
+#define BULK_START_TIMER_INTERVAL (HZ/50) /* 20 ms */
+#define BULK_EOT_TIMER_INTERVAL (HZ/16) /* 60 ms */
+
+/* Delay before a URB completion happen when it's scheduled to be delayed */
+#define LATER_TIMER_DELAY (HZ/50) /* 20 ms */
+
+/* Simplifying macros for checking software state info of a epid */
+/* ----------------------------------------------------------------------- */
+#define epid_inuse(epid) epid_state[epid].inuse
+#define epid_out_traffic(epid) epid_state[epid].out_traffic
+#define epid_isoc(epid) (epid_state[epid].type == PIPE_ISOCHRONOUS ? 1 : 0)
+#define epid_intr(epid) (epid_state[epid].type == PIPE_INTERRUPT ? 1 : 0)
+
+
+/***************************************************************************/
+/***************************************************************************/
+/* DEBUG FUNCTIONS */
+/***************************************************************************/
+/***************************************************************************/
+/* Note that these functions are always available in their "__" variants,
+ for use in error situations. The "__" missing variants are controlled by
+ the USB_DEBUG_DESC/USB_DEBUG_URB macros. */
+static void __dump_urb(struct urb* purb)
+{
+ struct crisv10_urb_priv *urb_priv = purb->hcpriv;
+ int urb_num = -1;
+ if(urb_priv) {
+ urb_num = urb_priv->urb_num;
+ }
+ printk("\nURB:0x%x[%d]\n", (unsigned int)purb, urb_num);
+ printk("dev :0x%08lx\n", (unsigned long)purb->dev);
+ printk("pipe :0x%08x\n", purb->pipe);
+ printk("status :%d\n", purb->status);
+ printk("transfer_flags :0x%08x\n", purb->transfer_flags);
+ printk("transfer_buffer :0x%08lx\n", (unsigned long)purb->transfer_buffer);
+ printk("transfer_buffer_length:%d\n", purb->transfer_buffer_length);
+ printk("actual_length :%d\n", purb->actual_length);
+ printk("setup_packet :0x%08lx\n", (unsigned long)purb->setup_packet);
+ printk("start_frame :%d\n", purb->start_frame);
+ printk("number_of_packets :%d\n", purb->number_of_packets);
+ printk("interval :%d\n", purb->interval);
+ printk("error_count :%d\n", purb->error_count);
+ printk("context :0x%08lx\n", (unsigned long)purb->context);
+ printk("complete :0x%08lx\n\n", (unsigned long)purb->complete);
+}
+
+static void __dump_in_desc(volatile struct USB_IN_Desc *in)
+{
+ printk("\nUSB_IN_Desc at 0x%08lx\n", (unsigned long)in);
+ printk(" sw_len : 0x%04x (%d)\n", in->sw_len, in->sw_len);
+ printk(" command : 0x%04x\n", in->command);
+ printk(" next : 0x%08lx\n", in->next);
+ printk(" buf : 0x%08lx\n", in->buf);
+ printk(" hw_len : 0x%04x (%d)\n", in->hw_len, in->hw_len);
+ printk(" status : 0x%04x\n\n", in->status);
+}
+
+static void __dump_sb_desc(volatile struct USB_SB_Desc *sb)
+{
+ char tt = (sb->command & 0x30) >> 4;
+ char *tt_string;
+
+ switch (tt) {
+ case 0:
+ tt_string = "zout";
+ break;
+ case 1:
+ tt_string = "in";
+ break;
+ case 2:
+ tt_string = "out";
+ break;
+ case 3:
+ tt_string = "setup";
+ break;
+ default:
+ tt_string = "unknown (weird)";
+ }
+
+ printk(" USB_SB_Desc at 0x%08lx ", (unsigned long)sb);
+ printk(" command:0x%04x (", sb->command);
+ printk("rem:%d ", (sb->command & 0x3f00) >> 8);
+ printk("full:%d ", (sb->command & 0x40) >> 6);
+ printk("tt:%d(%s) ", tt, tt_string);
+ printk("intr:%d ", (sb->command & 0x8) >> 3);
+ printk("eot:%d ", (sb->command & 0x2) >> 1);
+ printk("eol:%d)", sb->command & 0x1);
+ printk(" sw_len:0x%04x(%d)", sb->sw_len, sb->sw_len);
+ printk(" next:0x%08lx", sb->next);
+ printk(" buf:0x%08lx\n", sb->buf);
+}
+
+
+static void __dump_ep_desc(volatile struct USB_EP_Desc *ep)
+{
+ printk("USB_EP_Desc at 0x%08lx ", (unsigned long)ep);
+ printk(" command:0x%04x (", ep->command);
+ printk("ep_id:%d ", (ep->command & 0x1f00) >> 8);
+ printk("enable:%d ", (ep->command & 0x10) >> 4);
+ printk("intr:%d ", (ep->command & 0x8) >> 3);
+ printk("eof:%d ", (ep->command & 0x2) >> 1);
+ printk("eol:%d)", ep->command & 0x1);
+ printk(" hw_len:0x%04x(%d)", ep->hw_len, ep->hw_len);
+ printk(" next:0x%08lx", ep->next);
+ printk(" sub:0x%08lx\n", ep->sub);
+}
+
+static inline void __dump_ep_list(int pipe_type)
+{
+ volatile struct USB_EP_Desc *ep;
+ volatile struct USB_EP_Desc *first_ep;
+ volatile struct USB_SB_Desc *sb;
+
+ switch (pipe_type)
+ {
+ case PIPE_BULK:
+ first_ep = &TxBulkEPList[0];
+ break;
+ case PIPE_CONTROL:
+ first_ep = &TxCtrlEPList[0];
+ break;
+ case PIPE_INTERRUPT:
+ first_ep = &TxIntrEPList[0];
+ break;
+ case PIPE_ISOCHRONOUS:
+ first_ep = &TxIsocEPList[0];
+ break;
+ default:
+ warn("Cannot dump unknown traffic type");
+ return;
+ }
+ ep = first_ep;
+
+ printk("\n\nDumping EP list...\n\n");
+
+ do {
+ __dump_ep_desc(ep);
+ /* Cannot phys_to_virt on 0 as it turns into 80000000, which is != 0. */
+ sb = ep->sub ? phys_to_virt(ep->sub) : 0;
+ while (sb) {
+ __dump_sb_desc(sb);
+ sb = sb->next ? phys_to_virt(sb->next) : 0;
+ }
+ ep = (volatile struct USB_EP_Desc *)(phys_to_virt(ep->next));
+
+ } while (ep != first_ep);
+}
+
+static inline void __dump_ept_data(int epid)
+{
+ unsigned long flags;
+ __u32 r_usb_ept_data;
+
+ if (epid < 0 || epid > 31) {
+ printk("Cannot dump ept data for invalid epid %d\n", epid);
+ return;
+ }
+
+ local_irq_save(flags);
+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
+ nop();
+ r_usb_ept_data = *R_USB_EPT_DATA;
+ local_irq_restore(flags);
+
+ printk(" R_USB_EPT_DATA = 0x%x for epid %d :\n", r_usb_ept_data, epid);
+ if (r_usb_ept_data == 0) {
+ /* No need for more detailed printing. */
+ return;
+ }
+ printk(" valid : %d\n", (r_usb_ept_data & 0x80000000) >> 31);
+ printk(" hold : %d\n", (r_usb_ept_data & 0x40000000) >> 30);
+ printk(" error_count_in : %d\n", (r_usb_ept_data & 0x30000000) >> 28);
+ printk(" t_in : %d\n", (r_usb_ept_data & 0x08000000) >> 27);
+ printk(" low_speed : %d\n", (r_usb_ept_data & 0x04000000) >> 26);
+ printk(" port : %d\n", (r_usb_ept_data & 0x03000000) >> 24);
+ printk(" error_code : %d\n", (r_usb_ept_data & 0x00c00000) >> 22);
+ printk(" t_out : %d\n", (r_usb_ept_data & 0x00200000) >> 21);
+ printk(" error_count_out : %d\n", (r_usb_ept_data & 0x00180000) >> 19);
+ printk(" max_len : %d\n", (r_usb_ept_data & 0x0003f800) >> 11);
+ printk(" ep : %d\n", (r_usb_ept_data & 0x00000780) >> 7);
+ printk(" dev : %d\n", (r_usb_ept_data & 0x0000003f));
+}
+
+static inline void __dump_ept_data_iso(int epid)
+{
+ unsigned long flags;
+ __u32 ept_data;
+
+ if (epid < 0 || epid > 31) {
+ printk("Cannot dump ept data for invalid epid %d\n", epid);
+ return;
+ }
+
+ local_irq_save(flags);
+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
+ nop();
+ ept_data = *R_USB_EPT_DATA_ISO;
+ local_irq_restore(flags);
+
+ printk(" R_USB_EPT_DATA = 0x%x for epid %d :\n", ept_data, epid);
+ if (ept_data == 0) {
+ /* No need for more detailed printing. */
+ return;
+ }
+ printk(" valid : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, valid,
+ ept_data));
+ printk(" port : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, port,
+ ept_data));
+ printk(" error_code : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code,
+ ept_data));
+ printk(" max_len : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, max_len,
+ ept_data));
+ printk(" ep : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, ep,
+ ept_data));
+ printk(" dev : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, dev,
+ ept_data));
+}
+
+static inline void __dump_ept_data_list(void)
+{
+ int i;
+
+ printk("Dumping the whole R_USB_EPT_DATA list\n");
+
+ for (i = 0; i < 32; i++) {
+ __dump_ept_data(i);
+ }
+}
+
+static void debug_epid(int epid) {
+ int i;
+
+ if(epid_isoc(epid)) {
+ __dump_ept_data_iso(epid);
+ } else {
+ __dump_ept_data(epid);
+ }
+
+ printk("Bulk:\n");
+ for(i = 0; i < 32; i++) {
+ if(IO_EXTRACT(USB_EP_command, epid, TxBulkEPList[i].command) ==
+ epid) {
+ printk("%d: ", i); __dump_ep_desc(&(TxBulkEPList[i]));
+ }
+ }
+
+ printk("Ctrl:\n");
+ for(i = 0; i < 32; i++) {
+ if(IO_EXTRACT(USB_EP_command, epid, TxCtrlEPList[i].command) ==
+ epid) {
+ printk("%d: ", i); __dump_ep_desc(&(TxCtrlEPList[i]));
+ }
+ }
+
+ printk("Intr:\n");
+ for(i = 0; i < MAX_INTR_INTERVAL; i++) {
+ if(IO_EXTRACT(USB_EP_command, epid, TxIntrEPList[i].command) ==
+ epid) {
+ printk("%d: ", i); __dump_ep_desc(&(TxIntrEPList[i]));
+ }
+ }
+
+ printk("Isoc:\n");
+ for(i = 0; i < 32; i++) {
+ if(IO_EXTRACT(USB_EP_command, epid, TxIsocEPList[i].command) ==
+ epid) {
+ printk("%d: ", i); __dump_ep_desc(&(TxIsocEPList[i]));
+ }
+ }
+
+ __dump_ept_data_list();
+ __dump_ep_list(PIPE_INTERRUPT);
+ printk("\n\n");
+}
+
+
+
+char* hcd_status_to_str(__u8 bUsbStatus) {
+ static char hcd_status_str[128];
+ hcd_status_str[0] = '\0';
+ if(bUsbStatus & IO_STATE(R_USB_STATUS, ourun, yes)) {
+ strcat(hcd_status_str, "ourun ");
+ }
+ if(bUsbStatus & IO_STATE(R_USB_STATUS, perror, yes)) {
+ strcat(hcd_status_str, "perror ");
+ }
+ if(bUsbStatus & IO_STATE(R_USB_STATUS, device_mode, yes)) {
+ strcat(hcd_status_str, "device_mode ");
+ }
+ if(bUsbStatus & IO_STATE(R_USB_STATUS, host_mode, yes)) {
+ strcat(hcd_status_str, "host_mode ");
+ }
+ if(bUsbStatus & IO_STATE(R_USB_STATUS, started, yes)) {
+ strcat(hcd_status_str, "started ");
+ }
+ if(bUsbStatus & IO_STATE(R_USB_STATUS, running, yes)) {
+ strcat(hcd_status_str, "running ");
+ }
+ return hcd_status_str;
+}
+
+
+char* sblist_to_str(struct USB_SB_Desc* sb_desc) {
+ static char sblist_to_str_buff[128];
+ char tmp[32], tmp2[32];
+ sblist_to_str_buff[0] = '\0';
+ while(sb_desc != NULL) {
+ switch(IO_EXTRACT(USB_SB_command, tt, sb_desc->command)) {
+ case 0: sprintf(tmp, "zout"); break;
+ case 1: sprintf(tmp, "in"); break;
+ case 2: sprintf(tmp, "out"); break;
+ case 3: sprintf(tmp, "setup"); break;
+ }
+ sprintf(tmp2, "(%s %d)", tmp, sb_desc->sw_len);
+ strcat(sblist_to_str_buff, tmp2);
+ if(sb_desc->next != 0) {
+ sb_desc = phys_to_virt(sb_desc->next);
+ } else {
+ sb_desc = NULL;
+ }
+ }
+ return sblist_to_str_buff;
+}
+
+char* port_status_to_str(__u16 wPortStatus) {
+ static char port_status_str[128];
+ port_status_str[0] = '\0';
+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) {
+ strcat(port_status_str, "connected ");
+ }
+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) {
+ strcat(port_status_str, "enabled ");
+ }
+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, suspended, yes)) {
+ strcat(port_status_str, "suspended ");
+ }
+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, reset, yes)) {
+ strcat(port_status_str, "reset ");
+ }
+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, speed, full)) {
+ strcat(port_status_str, "full-speed ");
+ } else {
+ strcat(port_status_str, "low-speed ");
+ }
+ return port_status_str;
+}
+
+
+char* endpoint_to_str(struct usb_endpoint_descriptor *ed) {
+ static char endpoint_to_str_buff[128];
+ char tmp[32];
+ int epnum = ed->bEndpointAddress & 0x0F;
+ int dir = ed->bEndpointAddress & 0x80;
+ int type = ed->bmAttributes & 0x03;
+ endpoint_to_str_buff[0] = '\0';
+ sprintf(endpoint_to_str_buff, "ep:%d ", epnum);
+ switch(type) {
+ case 0:
+ sprintf(tmp, " ctrl");
+ break;
+ case 1:
+ sprintf(tmp, " isoc");
+ break;
+ case 2:
+ sprintf(tmp, " bulk");
+ break;
+ case 3:
+ sprintf(tmp, " intr");
+ break;
+ }
+ strcat(endpoint_to_str_buff, tmp);
+ if(dir) {
+ sprintf(tmp, " in");
+ } else {
+ sprintf(tmp, " out");
+ }
+ strcat(endpoint_to_str_buff, tmp);
+
+ return endpoint_to_str_buff;
+}
+
+/* Debug helper functions for Transfer Controller */
+char* pipe_to_str(unsigned int pipe) {
+ static char pipe_to_str_buff[128];
+ char tmp[64];
+ sprintf(pipe_to_str_buff, "dir:%s", str_dir(pipe));
+ sprintf(tmp, " type:%s", str_type(pipe));
+ strcat(pipe_to_str_buff, tmp);
+
+ sprintf(tmp, " dev:%d", usb_pipedevice(pipe));
+ strcat(pipe_to_str_buff, tmp);
+ sprintf(tmp, " ep:%d", usb_pipeendpoint(pipe));
+ strcat(pipe_to_str_buff, tmp);
+ return pipe_to_str_buff;
+}
+
+
+#define USB_DEBUG_DESC 1
+
+#ifdef USB_DEBUG_DESC
+#define dump_in_desc(x) __dump_in_desc(x)
+#define dump_sb_desc(...) __dump_sb_desc(...)
+#define dump_ep_desc(x) __dump_ep_desc(x)
+#define dump_ept_data(x) __dump_ept_data(x)
+#else
+#define dump_in_desc(...) do {} while (0)
+#define dump_sb_desc(...) do {} while (0)
+#define dump_ep_desc(...) do {} while (0)
+#endif
+
+
+/* Uncomment this to enable massive function call trace
+ #define USB_DEBUG_TRACE */
+
+#ifdef USB_DEBUG_TRACE
+#define DBFENTER (printk(": Entering: %s\n", __FUNCTION__))
+#define DBFEXIT (printk(": Exiting: %s\n", __FUNCTION__))
+#else
+#define DBFENTER do {} while (0)
+#define DBFEXIT do {} while (0)
+#endif
+
+#define CHECK_ALIGN(x) if (((__u32)(x)) & 0x00000003) \
+{panic("Alignment check (DWORD) failed at %s:%s:%d\n", __FILE__, __FUNCTION__, __LINE__);}
+
+/* Most helpful debugging aid */
+#define ASSERT(expr) ((void) ((expr) ? 0 : (err("assert failed at: %s %d",__FUNCTION__, __LINE__))))
+
+
+/***************************************************************************/
+/***************************************************************************/
+/* Forward declarations */
+/***************************************************************************/
+/***************************************************************************/
+void crisv10_hcd_epid_attn_irq(struct crisv10_irq_reg *reg);
+void crisv10_hcd_port_status_irq(struct crisv10_irq_reg *reg);
+void crisv10_hcd_ctl_status_irq(struct crisv10_irq_reg *reg);
+void crisv10_hcd_isoc_eof_irq(struct crisv10_irq_reg *reg);
+
+void rh_port_status_change(__u16[]);
+int rh_clear_port_feature(__u8, __u16);
+int rh_set_port_feature(__u8, __u16);
+static void rh_disable_port(unsigned int port);
+
+static void check_finished_bulk_tx_epids(struct usb_hcd *hcd,
+ int timer);
+
+static int tc_setup_epid(struct usb_host_endpoint *ep, struct urb *urb,
+ int mem_flags);
+static void tc_free_epid(struct usb_host_endpoint *ep);
+static int tc_allocate_epid(void);
+static void tc_finish_urb(struct usb_hcd *hcd, struct urb *urb, int status);
+static void tc_finish_urb_later(struct usb_hcd *hcd, struct urb *urb,
+ int status);
+
+static int urb_priv_create(struct usb_hcd *hcd, struct urb *urb, int epid,
+ int mem_flags);
+static void urb_priv_free(struct usb_hcd *hcd, struct urb *urb);
+
+static inline struct urb *urb_list_first(int epid);
+static inline void urb_list_add(struct urb *urb, int epid,
+ int mem_flags);
+static inline urb_entry_t *urb_list_entry(struct urb *urb, int epid);
+static inline void urb_list_del(struct urb *urb, int epid);
+static inline void urb_list_move_last(struct urb *urb, int epid);
+static inline struct urb *urb_list_next(struct urb *urb, int epid);
+
+int create_sb_for_urb(struct urb *urb, int mem_flags);
+int init_intr_urb(struct urb *urb, int mem_flags);
+
+static inline void etrax_epid_set(__u8 index, __u32 data);
+static inline void etrax_epid_clear_error(__u8 index);
+static inline void etrax_epid_set_toggle(__u8 index, __u8 dirout,
+ __u8 toggle);
+static inline __u8 etrax_epid_get_toggle(__u8 index, __u8 dirout);
+static inline __u32 etrax_epid_get(__u8 index);
+
+/* We're accessing the same register position in Etrax so
+ when we do full access the internal difference doesn't matter */
+#define etrax_epid_iso_set(index, data) etrax_epid_set(index, data)
+#define etrax_epid_iso_get(index) etrax_epid_get(index)
+
+
+static void tc_dma_process_isoc_urb(struct urb *urb);
+static void tc_dma_process_queue(int epid);
+static void tc_dma_unlink_intr_urb(struct urb *urb);
+static irqreturn_t tc_dma_tx_interrupt(int irq, void *vhc);
+static irqreturn_t tc_dma_rx_interrupt(int irq, void *vhc);
+
+static void tc_bulk_start_timer_func(unsigned long dummy);
+static void tc_bulk_eot_timer_func(unsigned long dummy);
+
+
+/*************************************************************/
+/*************************************************************/
+/* Host Controler Driver block */
+/*************************************************************/
+/*************************************************************/
+
+/* HCD operations */
+static irqreturn_t crisv10_hcd_top_irq(int irq, void*);
+static int crisv10_hcd_reset(struct usb_hcd *);
+static int crisv10_hcd_start(struct usb_hcd *);
+static void crisv10_hcd_stop(struct usb_hcd *);
+#ifdef CONFIG_PM
+static int crisv10_hcd_suspend(struct device *, u32, u32);
+static int crisv10_hcd_resume(struct device *, u32);
+#endif /* CONFIG_PM */
+static int crisv10_hcd_get_frame(struct usb_hcd *);
+
+static int tc_urb_enqueue(struct usb_hcd *, struct usb_host_endpoint *ep, struct urb *, gfp_t mem_flags);
+static int tc_urb_dequeue(struct usb_hcd *, struct urb *);
+static void tc_endpoint_disable(struct usb_hcd *, struct usb_host_endpoint *ep);
+
+static int rh_status_data_request(struct usb_hcd *, char *);
+static int rh_control_request(struct usb_hcd *, u16, u16, u16, char*, u16);
+
+#ifdef CONFIG_PM
+static int crisv10_hcd_hub_suspend(struct usb_hcd *);
+static int crisv10_hcd_hub_resume(struct usb_hcd *);
+#endif /* CONFIG_PM */
+#ifdef CONFIG_USB_OTG
+static int crisv10_hcd_start_port_reset(struct usb_hcd *, unsigned);
+#endif /* CONFIG_USB_OTG */
+
+/* host controller driver interface */
+static const struct hc_driver crisv10_hc_driver =
+ {
+ .description = hc_name,
+ .product_desc = product_desc,
+ .hcd_priv_size = sizeof(struct crisv10_hcd),
+
+ /* Attaching IRQ handler manualy in probe() */
+ /* .irq = crisv10_hcd_irq, */
+
+ .flags = HCD_USB11,
+
+ /* called to init HCD and root hub */
+ .reset = crisv10_hcd_reset,
+ .start = crisv10_hcd_start,
+
+ /* cleanly make HCD stop writing memory and doing I/O */
+ .stop = crisv10_hcd_stop,
+
+ /* return current frame number */
+ .get_frame_number = crisv10_hcd_get_frame,
+
+
+ /* Manage i/o requests via the Transfer Controller */
+ .urb_enqueue = tc_urb_enqueue,
+ .urb_dequeue = tc_urb_dequeue,
+
+ /* hw synch, freeing endpoint resources that urb_dequeue can't */
+ .endpoint_disable = tc_endpoint_disable,
+
+
+ /* Root Hub support */
+ .hub_status_data = rh_status_data_request,
+ .hub_control = rh_control_request,
+#ifdef CONFIG_PM
+ .hub_suspend = rh_suspend_request,
+ .hub_resume = rh_resume_request,
+#endif /* CONFIG_PM */
+#ifdef CONFIG_USB_OTG
+ .start_port_reset = crisv10_hcd_start_port_reset,
+#endif /* CONFIG_USB_OTG */
+ };
+
+
+/*
+ * conversion between pointers to a hcd and the corresponding
+ * crisv10_hcd
+ */
+
+static inline struct crisv10_hcd *hcd_to_crisv10_hcd(struct usb_hcd *hcd)
+{
+ return (struct crisv10_hcd *) hcd->hcd_priv;
+}
+
+static inline struct usb_hcd *crisv10_hcd_to_hcd(struct crisv10_hcd *hcd)
+{
+ return container_of((void *) hcd, struct usb_hcd, hcd_priv);
+}
+
+/* check if specified port is in use */
+static inline int port_in_use(unsigned int port)
+{
+ return ports & (1 << port);
+}
+
+/* number of ports in use */
+static inline unsigned int num_ports(void)
+{
+ unsigned int i, num = 0;
+ for (i = 0; i < USB_ROOT_HUB_PORTS; i++)
+ if (port_in_use(i))
+ num++;
+ return num;
+}
+
+/* map hub port number to the port number used internally by the HC */
+static inline unsigned int map_port(unsigned int port)
+{
+ unsigned int i, num = 0;
+ for (i = 0; i < USB_ROOT_HUB_PORTS; i++)
+ if (port_in_use(i))
+ if (++num == port)
+ return i;
+ return -1;
+}
+
+/* size of descriptors in slab cache */
+#ifndef MAX
+#define MAX(x, y) ((x) > (y) ? (x) : (y))
+#endif
+
+
+/******************************************************************/
+/* Hardware Interrupt functions */
+/******************************************************************/
+
+/* Fast interrupt handler for HC */
+static irqreturn_t crisv10_hcd_top_irq(int irq, void *vcd)
+{
+ struct usb_hcd *hcd = vcd;
+ struct crisv10_irq_reg reg;
+ __u32 irq_mask;
+ unsigned long flags;
+
+ DBFENTER;
+
+ ASSERT(hcd != NULL);
+ reg.hcd = hcd;
+
+ /* Turn of other interrupts while handling these sensitive cases */
+ local_irq_save(flags);
+
+ /* Read out which interrupts that are flaged */
+ irq_mask = *R_USB_IRQ_MASK_READ;
+ reg.r_usb_irq_mask_read = irq_mask;
+
+ /* Reading R_USB_STATUS clears the ctl_status interrupt. Note that
+ R_USB_STATUS must be read before R_USB_EPID_ATTN since reading the latter
+ clears the ourun and perror fields of R_USB_STATUS. */
+ reg.r_usb_status = *R_USB_STATUS;
+
+ /* Reading R_USB_EPID_ATTN clears the iso_eof, bulk_eot and epid_attn
+ interrupts. */
+ reg.r_usb_epid_attn = *R_USB_EPID_ATTN;
+
+ /* Reading R_USB_RH_PORT_STATUS_1 and R_USB_RH_PORT_STATUS_2 clears the
+ port_status interrupt. */
+ reg.r_usb_rh_port_status_1 = *R_USB_RH_PORT_STATUS_1;
+ reg.r_usb_rh_port_status_2 = *R_USB_RH_PORT_STATUS_2;
+
+ /* Reading R_USB_FM_NUMBER clears the sof interrupt. */
+ /* Note: the lower 11 bits contain the actual frame number, sent with each
+ sof. */
+ reg.r_usb_fm_number = *R_USB_FM_NUMBER;
+
+ /* Interrupts are handled in order of priority. */
+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, port_status)) {
+ crisv10_hcd_port_status_irq(&reg);
+ }
+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, epid_attn)) {
+ crisv10_hcd_epid_attn_irq(&reg);
+ }
+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, ctl_status)) {
+ crisv10_hcd_ctl_status_irq(&reg);
+ }
+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, iso_eof)) {
+ crisv10_hcd_isoc_eof_irq(&reg);
+ }
+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, bulk_eot)) {
+ /* Update/restart the bulk start timer since obviously the channel is
+ running. */
+ mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL);
+ /* Update/restart the bulk eot timer since we just received an bulk eot
+ interrupt. */
+ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
+
+ /* Check for finished bulk transfers on epids */
+ check_finished_bulk_tx_epids(hcd, 0);
+ }
+ local_irq_restore(flags);
+
+ DBFEXIT;
+ return IRQ_HANDLED;
+}
+
+
+void crisv10_hcd_epid_attn_irq(struct crisv10_irq_reg *reg) {
+ struct usb_hcd *hcd = reg->hcd;
+ struct crisv10_urb_priv *urb_priv;
+ int epid;
+ DBFENTER;
+
+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
+ if (test_bit(epid, (void *)&reg->r_usb_epid_attn)) {
+ struct urb *urb;
+ __u32 ept_data;
+ int error_code;
+
+ if (epid == DUMMY_EPID || epid == INVALID_EPID) {
+ /* We definitely don't care about these ones. Besides, they are
+ always disabled, so any possible disabling caused by the
+ epid attention interrupt is irrelevant. */
+ warn("Got epid_attn for INVALID_EPID or DUMMY_EPID (%d).", epid);
+ continue;
+ }
+
+ if(!epid_inuse(epid)) {
+ irq_err("Epid attention on epid:%d that isn't in use\n", epid);
+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
+ debug_epid(epid);
+ continue;
+ }
+
+ /* Note that although there are separate R_USB_EPT_DATA and
+ R_USB_EPT_DATA_ISO registers, they are located at the same address and
+ are of the same size. In other words, this read should be ok for isoc
+ also. */
+ ept_data = etrax_epid_get(epid);
+ error_code = IO_EXTRACT(R_USB_EPT_DATA, error_code, ept_data);
+
+ /* Get the active URB for this epid. We blatantly assume
+ that only this URB could have caused the epid attention. */
+ urb = activeUrbList[epid];
+ if (urb == NULL) {
+ irq_err("Attention on epid:%d error:%d with no active URB.\n",
+ epid, error_code);
+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
+ debug_epid(epid);
+ continue;
+ }
+
+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
+ ASSERT(urb_priv);
+
+ /* Using IO_STATE_VALUE on R_USB_EPT_DATA should be ok for isoc also. */
+ if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
+
+ /* Isoc traffic doesn't have error_count_in/error_count_out. */
+ if ((usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) &&
+ (IO_EXTRACT(R_USB_EPT_DATA, error_count_in, ept_data) == 3 ||
+ IO_EXTRACT(R_USB_EPT_DATA, error_count_out, ept_data) == 3)) {
+ /* Check if URB allready is marked for late-finish, we can get
+ several 3rd error for Intr traffic when a device is unplugged */
+ if(urb_priv->later_data == NULL) {
+ /* 3rd error. */
+ irq_warn("3rd error for epid:%d (%s %s) URB:0x%x[%d]\n", epid,
+ str_dir(urb->pipe), str_type(urb->pipe),
+ (unsigned int)urb, urb_priv->urb_num);
+
+ tc_finish_urb_later(hcd, urb, -EPROTO);
+ }
+
+ } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) {
+ irq_warn("Perror for epid:%d\n", epid);
+ printk("FM_NUMBER: %d\n", reg->r_usb_fm_number & 0x7ff);
+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
+ __dump_urb(urb);
+ debug_epid(epid);
+
+ if (!(ept_data & IO_MASK(R_USB_EPT_DATA, valid))) {
+ /* invalid ep_id */
+ panic("Perror because of invalid epid."
+ " Deconfigured too early?");
+ } else {
+ /* past eof1, near eof, zout transfer, setup transfer */
+ /* Dump the urb and the relevant EP descriptor. */
+ panic("Something wrong with DMA descriptor contents."
+ " Too much traffic inserted?");
+ }
+ } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) {
+ /* buffer ourun */
+ printk("FM_NUMBER: %d\n", reg->r_usb_fm_number & 0x7ff);
+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
+ __dump_urb(urb);
+ debug_epid(epid);
+
+ panic("Buffer overrun/underrun for epid:%d. DMA too busy?", epid);
+ } else {
+ irq_warn("Attention on epid:%d (%s %s) with no error code\n", epid,
+ str_dir(urb->pipe), str_type(urb->pipe));
+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
+ __dump_urb(urb);
+ debug_epid(epid);
+ }
+
+ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code,
+ stall)) {
+ /* Not really a protocol error, just says that the endpoint gave
+ a stall response. Note that error_code cannot be stall for isoc. */
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+ panic("Isoc traffic cannot stall");
+ }
+
+ tc_dbg("Stall for epid:%d (%s %s) URB:0x%x\n", epid,
+ str_dir(urb->pipe), str_type(urb->pipe), (unsigned int)urb);
+ tc_finish_urb(hcd, urb, -EPIPE);
+
+ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code,
+ bus_error)) {
+ /* Two devices responded to a transaction request. Must be resolved
+ by software. FIXME: Reset ports? */
+ panic("Bus error for epid %d."
+ " Two devices responded to transaction request\n",
+ epid);
+
+ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code,
+ buffer_error)) {
+ /* DMA overrun or underrun. */
+ irq_warn("Buffer overrun/underrun for epid:%d (%s %s)\n", epid,
+ str_dir(urb->pipe), str_type(urb->pipe));
+
+ /* It seems that error_code = buffer_error in
+ R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS
+ are the same error. */
+ tc_finish_urb(hcd, urb, -EPROTO);
+ } else {
+ irq_warn("Unknown attention on epid:%d (%s %s)\n", epid,
+ str_dir(urb->pipe), str_type(urb->pipe));
+ dump_ept_data(epid);
+ }
+ }
+ }
+ DBFEXIT;
+}
+
+void crisv10_hcd_port_status_irq(struct crisv10_irq_reg *reg)
+{
+ __u16 port_reg[USB_ROOT_HUB_PORTS];
+ DBFENTER;
+ port_reg[0] = reg->r_usb_rh_port_status_1;
+ port_reg[1] = reg->r_usb_rh_port_status_2;
+ rh_port_status_change(port_reg);
+ DBFEXIT;
+}
+
+void crisv10_hcd_isoc_eof_irq(struct crisv10_irq_reg *reg)
+{
+ int epid;
+ struct urb *urb;
+ struct crisv10_urb_priv *urb_priv;
+
+ DBFENTER;
+
+ for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
+
+ /* Only check epids that are in use, is valid and has SB list */
+ if (!epid_inuse(epid) || epid == INVALID_EPID ||
+ TxIsocEPList[epid].sub == 0 || epid == DUMMY_EPID) {
+ /* Nothing here to see. */
+ continue;
+ }
+ ASSERT(epid_isoc(epid));
+
+ /* Get the active URB for this epid (if any). */
+ urb = activeUrbList[epid];
+ if (urb == 0) {
+ isoc_warn("Ignoring NULL urb for epid:%d\n", epid);
+ continue;
+ }
+ if(!epid_out_traffic(epid)) {
+ /* Sanity check. */
+ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
+
+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
+ ASSERT(urb_priv);
+
+ if (urb_priv->urb_state == NOT_STARTED) {
+ /* If ASAP is not set and urb->start_frame is the current frame,
+ start the transfer. */
+ if (!(urb->transfer_flags & URB_ISO_ASAP) &&
+ (urb->start_frame == (*R_USB_FM_NUMBER & 0x7ff))) {
+ /* EP should not be enabled if we're waiting for start_frame */
+ ASSERT((TxIsocEPList[epid].command &
+ IO_STATE(USB_EP_command, enable, yes)) == 0);
+
+ isoc_warn("Enabling isoc IN EP descr for epid %d\n", epid);
+ TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
+
+ /* This urb is now active. */
+ urb_priv->urb_state = STARTED;
+ continue;
+ }
+ }
+ }
+ }
+
+ DBFEXIT;
+}
+
+void crisv10_hcd_ctl_status_irq(struct crisv10_irq_reg *reg)
+{
+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(reg->hcd);
+
+ DBFENTER;
+ ASSERT(crisv10_hcd);
+
+ irq_dbg("ctr_status_irq, controller status: %s\n",
+ hcd_status_to_str(reg->r_usb_status));
+
+ /* FIXME: What should we do if we get ourun or perror? Dump the EP and SB
+ list for the corresponding epid? */
+ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) {
+ panic("USB controller got ourun.");
+ }
+ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) {
+
+ /* Before, etrax_usb_do_intr_recover was called on this epid if it was
+ an interrupt pipe. I don't see how re-enabling all EP descriptors
+ will help if there was a programming error. */
+ panic("USB controller got perror.");
+ }
+
+ /* Keep track of USB Controller, if it's running or not */
+ if(reg->r_usb_status & IO_STATE(R_USB_STATUS, running, yes)) {
+ crisv10_hcd->running = 1;
+ } else {
+ crisv10_hcd->running = 0;
+ }
+
+ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, device_mode)) {
+ /* We should never operate in device mode. */
+ panic("USB controller in device mode.");
+ }
+
+ /* Set the flag to avoid getting "Unlink after no-IRQ? Controller is probably
+ using the wrong IRQ" from hcd_unlink_urb() in drivers/usb/core/hcd.c */
+ set_bit(HCD_FLAG_SAW_IRQ, &reg->hcd->flags);
+
+ DBFEXIT;
+}
+
+
+/******************************************************************/
+/* Host Controller interface functions */
+/******************************************************************/
+
+static inline void crisv10_ready_wait(void) {
+ volatile int timeout = 10000;
+ /* Check the busy bit of USB controller in Etrax */
+ while((*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)) &&
+ (timeout-- > 0));
+ if(timeout == 0) {
+ warn("Timeout while waiting for USB controller to be idle\n");
+ }
+}
+
+/* reset host controller */
+static int crisv10_hcd_reset(struct usb_hcd *hcd)
+{
+ DBFENTER;
+ hcd_dbg(hcd, "reset\n");
+
+
+ /* Reset the USB interface. */
+ /*
+ *R_USB_COMMAND =
+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
+ IO_STATE(R_USB_COMMAND, ctrl_cmd, reset);
+ nop();
+ */
+ DBFEXIT;
+ return 0;
+}
+
+/* start host controller */
+static int crisv10_hcd_start(struct usb_hcd *hcd)
+{
+ DBFENTER;
+ hcd_dbg(hcd, "start\n");
+
+ crisv10_ready_wait();
+
+ /* Start processing of USB traffic. */
+ *R_USB_COMMAND =
+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
+
+ nop();
+
+ hcd->state = HC_STATE_RUNNING;
+
+ DBFEXIT;
+ return 0;
+}
+
+/* stop host controller */
+static void crisv10_hcd_stop(struct usb_hcd *hcd)
+{
+ DBFENTER;
+ hcd_dbg(hcd, "stop\n");
+ crisv10_hcd_reset(hcd);
+ DBFEXIT;
+}
+
+/* return the current frame number */
+static int crisv10_hcd_get_frame(struct usb_hcd *hcd)
+{
+ DBFENTER;
+ DBFEXIT;
+ return (*R_USB_FM_NUMBER & 0x7ff);
+}
+
+#ifdef CONFIG_USB_OTG
+
+static int crisv10_hcd_start_port_reset(struct usb_hcd *hcd, unsigned port)
+{
+ return 0; /* no-op for now */
+}
+
+#endif /* CONFIG_USB_OTG */
+
+
+/******************************************************************/
+/* Root Hub functions */
+/******************************************************************/
+
+/* root hub status */
+static const struct usb_hub_status rh_hub_status =
+ {
+ .wHubStatus = 0,
+ .wHubChange = 0,
+ };
+
+/* root hub descriptor */
+static const u8 rh_hub_descr[] =
+ {
+ 0x09, /* bDescLength */
+ 0x29, /* bDescriptorType */
+ USB_ROOT_HUB_PORTS, /* bNbrPorts */
+ 0x00, /* wHubCharacteristics */
+ 0x00,
+ 0x01, /* bPwrOn2pwrGood */
+ 0x00, /* bHubContrCurrent */
+ 0x00, /* DeviceRemovable */
+ 0xff /* PortPwrCtrlMask */
+ };
+
+/* Actual holder of root hub status*/
+struct crisv10_rh rh;
+
+/* Initialize root hub data structures (called from dvdrv_hcd_probe()) */
+int rh_init(void) {
+ int i;
+ /* Reset port status flags */
+ for (i = 0; i < USB_ROOT_HUB_PORTS; i++) {
+ rh.wPortChange[i] = 0;
+ rh.wPortStatusPrev[i] = 0;
+ }
+ return 0;
+}
+
+#define RH_FEAT_MASK ((1<<USB_PORT_FEAT_CONNECTION)|\
+ (1<<USB_PORT_FEAT_ENABLE)|\
+ (1<<USB_PORT_FEAT_SUSPEND)|\
+ (1<<USB_PORT_FEAT_RESET))
+
+/* Handle port status change interrupt (called from bottom part interrupt) */
+void rh_port_status_change(__u16 port_reg[]) {
+ int i;
+ __u16 wChange;
+
+ for(i = 0; i < USB_ROOT_HUB_PORTS; i++) {
+ /* Xor out changes since last read, masked for important flags */
+ wChange = (port_reg[i] & RH_FEAT_MASK) ^ rh.wPortStatusPrev[i];
+ /* Or changes together with (if any) saved changes */
+ rh.wPortChange[i] |= wChange;
+ /* Save new status */
+ rh.wPortStatusPrev[i] = port_reg[i];
+
+ if(wChange) {
+ rh_dbg("Interrupt port_status change port%d: %s Current-status:%s\n", i+1,
+ port_status_to_str(wChange),
+ port_status_to_str(port_reg[i]));
+ }
+ }
+}
+
+/* Construct port status change bitmap for the root hub */
+static int rh_status_data_request(struct usb_hcd *hcd, char *buf)
+{
+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd);
+ unsigned int i;
+
+ DBFENTER;
+ /*
+ * corresponds to hub status change EP (USB 2.0 spec section 11.13.4)
+ * return bitmap indicating ports with status change
+ */
+ *buf = 0;
+ spin_lock(&crisv10_hcd->lock);
+ for (i = 1; i <= crisv10_hcd->num_ports; i++) {
+ if (rh.wPortChange[map_port(i)]) {
+ *buf |= (1 << i);
+ rh_dbg("rh_status_data_request, change on port %d: %s Current Status: %s\n", i,
+ port_status_to_str(rh.wPortChange[map_port(i)]),
+ port_status_to_str(rh.wPortStatusPrev[map_port(i)]));
+ }
+ }
+ spin_unlock(&crisv10_hcd->lock);
+ DBFEXIT;
+ return *buf == 0 ? 0 : 1;
+}
+
+/* Handle a control request for the root hub (called from hcd_driver) */
+static int rh_control_request(struct usb_hcd *hcd,
+ u16 typeReq,
+ u16 wValue,
+ u16 wIndex,
+ char *buf,
+ u16 wLength) {
+
+ struct crisv10_hcd *crisv10_hcd = hcd_to_crisv10_hcd(hcd);
+ int retval = 0;
+ int len;
+ DBFENTER;
+
+ switch (typeReq) {
+ case GetHubDescriptor:
+ rh_dbg("GetHubDescriptor\n");
+ len = min_t(unsigned int, sizeof rh_hub_descr, wLength);
+ memcpy(buf, rh_hub_descr, len);
+ buf[2] = crisv10_hcd->num_ports;
+ break;
+ case GetHubStatus:
+ rh_dbg("GetHubStatus\n");
+ len = min_t(unsigned int, sizeof rh_hub_status, wLength);
+ memcpy(buf, &rh_hub_status, len);
+ break;
+ case GetPortStatus:
+ if (!wIndex || wIndex > crisv10_hcd->num_ports)
+ goto error;
+ rh_dbg("GetportStatus, port:%d change:%s status:%s\n", wIndex,
+ port_status_to_str(rh.wPortChange[map_port(wIndex)]),
+ port_status_to_str(rh.wPortStatusPrev[map_port(wIndex)]));
+ *(u16 *) buf = cpu_to_le16(rh.wPortStatusPrev[map_port(wIndex)]);
+ *(u16 *) (buf + 2) = cpu_to_le16(rh.wPortChange[map_port(wIndex)]);
+ break;
+ case SetHubFeature:
+ rh_dbg("SetHubFeature\n");
+ case ClearHubFeature:
+ rh_dbg("ClearHubFeature\n");
+ switch (wValue) {
+ case C_HUB_OVER_CURRENT:
+ case C_HUB_LOCAL_POWER:
+ rh_warn("Not implemented hub request:%d \n", typeReq);
+ /* not implemented */
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case SetPortFeature:
+ if (!wIndex || wIndex > crisv10_hcd->num_ports)
+ goto error;
+ if(rh_set_port_feature(map_port(wIndex), wValue))
+ goto error;
+ break;
+ case ClearPortFeature:
+ if (!wIndex || wIndex > crisv10_hcd->num_ports)
+ goto error;
+ if(rh_clear_port_feature(map_port(wIndex), wValue))
+ goto error;
+ break;
+ default:
+ rh_warn("Unknown hub request: %d\n", typeReq);
+ error:
+ retval = -EPIPE;
+ }
+ DBFEXIT;
+ return retval;
+}
+
+int rh_set_port_feature(__u8 bPort, __u16 wFeature) {
+ __u8 bUsbCommand = 0;
+ switch(wFeature) {
+ case USB_PORT_FEAT_RESET:
+ rh_dbg("SetPortFeature: reset\n");
+ bUsbCommand |= IO_STATE(R_USB_COMMAND, port_cmd, reset);
+ goto set;
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ rh_dbg("SetPortFeature: suspend\n");
+ bUsbCommand |= IO_STATE(R_USB_COMMAND, port_cmd, suspend);
+ goto set;
+ break;
+ case USB_PORT_FEAT_POWER:
+ rh_dbg("SetPortFeature: power\n");
+ break;
+ case USB_PORT_FEAT_C_CONNECTION:
+ rh_dbg("SetPortFeature: c_connection\n");
+ break;
+ case USB_PORT_FEAT_C_RESET:
+ rh_dbg("SetPortFeature: c_reset\n");
+ break;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ rh_dbg("SetPortFeature: c_over_current\n");
+ break;
+
+ set:
+ /* Select which port via the port_sel field */
+ bUsbCommand |= IO_FIELD(R_USB_COMMAND, port_sel, bPort+1);
+
+ /* Make sure the controller isn't busy. */
+ crisv10_ready_wait();
+ /* Send out the actual command to the USB controller */
+ *R_USB_COMMAND = bUsbCommand;
+
+ /* If port reset then also bring USB controller into running state */
+ if(wFeature == USB_PORT_FEAT_RESET) {
+ /* Wait a while for controller to first become started after port reset */
+ udelay(12000); /* 12ms blocking wait */
+
+ /* Make sure the controller isn't busy. */
+ crisv10_ready_wait();
+
+ /* If all enabled ports were disabled the host controller goes down into
+ started mode, so we need to bring it back into the running state.
+ (This is safe even if it's already in the running state.) */
+ *R_USB_COMMAND =
+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
+ }
+
+ break;
+ default:
+ rh_dbg("SetPortFeature: unknown feature\n");
+ return -1;
+ }
+ return 0;
+}
+
+int rh_clear_port_feature(__u8 bPort, __u16 wFeature) {
+ switch(wFeature) {
+ case USB_PORT_FEAT_ENABLE:
+ rh_dbg("ClearPortFeature: enable\n");
+ rh_disable_port(bPort);
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ rh_dbg("ClearPortFeature: suspend\n");
+ break;
+ case USB_PORT_FEAT_POWER:
+ rh_dbg("ClearPortFeature: power\n");
+ break;
+
+ case USB_PORT_FEAT_C_ENABLE:
+ rh_dbg("ClearPortFeature: c_enable\n");
+ goto clear;
+ case USB_PORT_FEAT_C_SUSPEND:
+ rh_dbg("ClearPortFeature: c_suspend\n");
+ goto clear;
+ case USB_PORT_FEAT_C_CONNECTION:
+ rh_dbg("ClearPortFeature: c_connection\n");
+ goto clear;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ rh_dbg("ClearPortFeature: c_over_current\n");
+ goto clear;
+ case USB_PORT_FEAT_C_RESET:
+ rh_dbg("ClearPortFeature: c_reset\n");
+ goto clear;
+ clear:
+ rh.wPortChange[bPort] &= ~(1 << (wFeature - 16));
+ break;
+ default:
+ rh_dbg("ClearPortFeature: unknown feature\n");
+ return -1;
+ }
+ return 0;
+}
+
+
+#ifdef CONFIG_PM
+/* Handle a suspend request for the root hub (called from hcd_driver) */
+static int rh_suspend_request(struct usb_hcd *hcd)
+{
+ return 0; /* no-op for now */
+}
+
+/* Handle a resume request for the root hub (called from hcd_driver) */
+static int rh_resume_request(struct usb_hcd *hcd)
+{
+ return 0; /* no-op for now */
+}
+#endif /* CONFIG_PM */
+
+
+
+/* Wrapper function for workaround port disable registers in USB controller */
+static void rh_disable_port(unsigned int port) {
+ volatile int timeout = 10000;
+ volatile char* usb_portx_disable;
+ switch(port) {
+ case 0:
+ usb_portx_disable = R_USB_PORT1_DISABLE;
+ break;
+ case 1:
+ usb_portx_disable = R_USB_PORT2_DISABLE;
+ break;
+ default:
+ /* Invalid port index */
+ return;
+ }
+ /* Set disable flag in special register */
+ *usb_portx_disable = IO_STATE(R_USB_PORT1_DISABLE, disable, yes);
+ /* Wait until not enabled anymore */
+ while((rh.wPortStatusPrev[port] &
+ IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) &&
+ (timeout-- > 0));
+ if(timeout == 0) {
+ warn("Timeout while waiting for port %d to become disabled\n", port);
+ }
+ /* clear disable flag in special register */
+ *usb_portx_disable = IO_STATE(R_USB_PORT1_DISABLE, disable, no);
+ rh_info("Physical port %d disabled\n", port+1);
+}
+
+
+/******************************************************************/
+/* Transfer Controller (TC) functions */
+/******************************************************************/
+
+/* FIXME: Should RX_BUF_SIZE be a config option, or maybe we should adjust it
+ dynamically?
+ To adjust it dynamically we would have to get an interrupt when we reach
+ the end of the rx descriptor list, or when we get close to the end, and
+ then allocate more descriptors. */
+#define NBR_OF_RX_DESC 512
+#define RX_DESC_BUF_SIZE 1024
+#define RX_BUF_SIZE (NBR_OF_RX_DESC * RX_DESC_BUF_SIZE)
+
+
+/* Local variables for Transfer Controller */
+/* --------------------------------------- */
+
+/* This is a circular (double-linked) list of the active urbs for each epid.
+ The head is never removed, and new urbs are linked onto the list as
+ urb_entry_t elements. Don't reference urb_list directly; use the wrapper
+ functions instead (which includes spin_locks) */
+static struct list_head urb_list[NBR_OF_EPIDS];
+
+/* Read about the need and usage of this lock in submit_ctrl_urb. */
+/* Lock for URB lists for each EPID */
+static spinlock_t urb_list_lock;
+
+/* Lock for EPID array register (R_USB_EPT_x) in Etrax */
+static spinlock_t etrax_epid_lock;
+
+/* Lock for dma8 sub0 handling */
+static spinlock_t etrax_dma8_sub0_lock;
+
+/* DMA IN cache bug. Align the DMA IN buffers to 32 bytes, i.e. a cache line.
+ Since RX_DESC_BUF_SIZE is 1024 is a multiple of 32, all rx buffers will be
+ cache aligned. */
+static volatile unsigned char RxBuf[RX_BUF_SIZE] __attribute__ ((aligned (32)));
+static volatile struct USB_IN_Desc RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned (4)));
+
+/* Pointers into RxDescList. */
+static volatile struct USB_IN_Desc *myNextRxDesc;
+static volatile struct USB_IN_Desc *myLastRxDesc;
+
+/* A zout transfer makes a memory access at the address of its buf pointer,
+ which means that setting this buf pointer to 0 will cause an access to the
+ flash. In addition to this, setting sw_len to 0 results in a 16/32 bytes
+ (depending on DMA burst size) transfer.
+ Instead, we set it to 1, and point it to this buffer. */
+static int zout_buffer[4] __attribute__ ((aligned (4)));
+
+/* Cache for allocating new EP and SB descriptors. */
+static kmem_cache_t *usb_desc_cache;
+
+/* Cache for the data allocated in the isoc descr top half. */
+static kmem_cache_t *isoc_compl_cache;
+
+/* Cache for the data allocated when delayed finishing of URBs */
+static kmem_cache_t *later_data_cache;
+
+
+/* Counter to keep track of how many Isoc EP we have sat up. Used to enable
+ and disable iso_eof interrupt. We only need these interrupts when we have
+ Isoc data endpoints (consumes CPU cycles).
+ FIXME: This could be more fine granular, so this interrupt is only enabled
+ when we have a In Isoc URB not URB_ISO_ASAP flaged queued. */
+static int isoc_epid_counter;
+
+/* Protecting wrapper functions for R_USB_EPT_x */
+/* -------------------------------------------- */
+static inline void etrax_epid_set(__u8 index, __u32 data) {
+ unsigned long flags;
+ spin_lock_irqsave(&etrax_epid_lock, flags);
+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
+ nop();
+ *R_USB_EPT_DATA = data;
+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
+}
+
+static inline void etrax_epid_clear_error(__u8 index) {
+ unsigned long flags;
+ spin_lock_irqsave(&etrax_epid_lock, flags);
+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
+ nop();
+ *R_USB_EPT_DATA &=
+ ~(IO_MASK(R_USB_EPT_DATA, error_count_in) |
+ IO_MASK(R_USB_EPT_DATA, error_count_out) |
+ IO_MASK(R_USB_EPT_DATA, error_code));
+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
+}
+
+static inline void etrax_epid_set_toggle(__u8 index, __u8 dirout,
+ __u8 toggle) {
+ unsigned long flags;
+ spin_lock_irqsave(&etrax_epid_lock, flags);
+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
+ nop();
+ if(dirout) {
+ *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_out);
+ *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_out, toggle);
+ } else {
+ *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_in);
+ *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_in, toggle);
+ }
+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
+}
+
+static inline __u8 etrax_epid_get_toggle(__u8 index, __u8 dirout) {
+ unsigned long flags;
+ __u8 toggle;
+ spin_lock_irqsave(&etrax_epid_lock, flags);
+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
+ nop();
+ if (dirout) {
+ toggle = IO_EXTRACT(R_USB_EPT_DATA, t_out, *R_USB_EPT_DATA);
+ } else {
+ toggle = IO_EXTRACT(R_USB_EPT_DATA, t_in, *R_USB_EPT_DATA);
+ }
+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
+ return toggle;
+}
+
+
+static inline __u32 etrax_epid_get(__u8 index) {
+ unsigned long flags;
+ __u32 data;
+ spin_lock_irqsave(&etrax_epid_lock, flags);
+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
+ nop();
+ data = *R_USB_EPT_DATA;
+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
+ return data;
+}
+
+
+
+
+/* Main functions for Transfer Controller */
+/* -------------------------------------- */
+
+/* Init structs, memories and lists used by Transfer Controller */
+int tc_init(struct usb_hcd *hcd) {
+ int i;
+ /* Clear software state info for all epids */
+ memset(epid_state, 0, sizeof(struct etrax_epid) * NBR_OF_EPIDS);
+
+ /* Set Invalid and Dummy as being in use and disabled */
+ epid_state[INVALID_EPID].inuse = 1;
+ epid_state[DUMMY_EPID].inuse = 1;
+ epid_state[INVALID_EPID].disabled = 1;
+ epid_state[DUMMY_EPID].disabled = 1;
+
+ /* Clear counter for how many Isoc epids we have sat up */
+ isoc_epid_counter = 0;
+
+ /* Initialize the urb list by initiating a head for each list.
+ Also reset list hodling active URB for each epid */
+ for (i = 0; i < NBR_OF_EPIDS; i++) {
+ INIT_LIST_HEAD(&urb_list[i]);
+ activeUrbList[i] = NULL;
+ }
+
+ /* Init lock for URB lists */
+ spin_lock_init(&urb_list_lock);
+ /* Init lock for Etrax R_USB_EPT register */
+ spin_lock_init(&etrax_epid_lock);
+ /* Init lock for Etrax dma8 sub0 handling */
+ spin_lock_init(&etrax_dma8_sub0_lock);
+
+ /* We use kmem_cache_* to make sure that all DMA desc. are dword aligned */
+
+ /* Note that we specify sizeof(struct USB_EP_Desc) as the size, but also
+ allocate SB descriptors from this cache. This is ok since
+ sizeof(struct USB_EP_Desc) == sizeof(struct USB_SB_Desc). */
+ usb_desc_cache = kmem_cache_create("usb_desc_cache",
+ sizeof(struct USB_EP_Desc), 0,
+ SLAB_HWCACHE_ALIGN, 0, 0);
+ if(usb_desc_cache == NULL) {
+ return -ENOMEM;
+ }
+
+ /* Create slab cache for speedy allocation of memory for isoc bottom-half
+ interrupt handling */
+ isoc_compl_cache =
+ kmem_cache_create("isoc_compl_cache",
+ sizeof(struct crisv10_isoc_complete_data),
+ 0, SLAB_HWCACHE_ALIGN, 0, 0);
+ if(isoc_compl_cache == NULL) {
+ return -ENOMEM;
+ }
+
+ /* Create slab cache for speedy allocation of memory for later URB finish
+ struct */
+ later_data_cache =
+ kmem_cache_create("later_data_cache",
+ sizeof(struct urb_later_data),
+ 0, SLAB_HWCACHE_ALIGN, 0, 0);
+ if(later_data_cache == NULL) {
+ return -ENOMEM;
+ }
+
+
+ /* Initiate the bulk start timer. */
+ init_timer(&bulk_start_timer);
+ bulk_start_timer.expires = jiffies + BULK_START_TIMER_INTERVAL;
+ bulk_start_timer.function = tc_bulk_start_timer_func;
+ add_timer(&bulk_start_timer);
+
+
+ /* Initiate the bulk eot timer. */
+ init_timer(&bulk_eot_timer);
+ bulk_eot_timer.expires = jiffies + BULK_EOT_TIMER_INTERVAL;
+ bulk_eot_timer.function = tc_bulk_eot_timer_func;
+ bulk_eot_timer.data = (unsigned long)hcd;
+ add_timer(&bulk_eot_timer);
+
+ return 0;
+}
+
+/* Uninitialize all resources used by Transfer Controller */
+void tc_destroy(void) {
+
+ /* Destroy all slab cache */
+ kmem_cache_destroy(usb_desc_cache);
+ kmem_cache_destroy(isoc_compl_cache);
+ kmem_cache_destroy(later_data_cache);
+
+ /* Remove timers */
+ del_timer(&bulk_start_timer);
+ del_timer(&bulk_eot_timer);
+}
+
+static void restart_dma8_sub0(void) {
+ unsigned long flags;
+ spin_lock_irqsave(&etrax_dma8_sub0_lock, flags);
+ /* Verify that the dma is not running */
+ if ((*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd)) == 0) {
+ struct USB_EP_Desc *ep = (struct USB_EP_Desc *)phys_to_virt(*R_DMA_CH8_SUB0_EP);
+ while (DUMMY_EPID == IO_EXTRACT(USB_EP_command, epid, ep->command)) {
+ ep = (struct USB_EP_Desc *)phys_to_virt(ep->next);
+ }
+ /* Advance the DMA to the next EP descriptor that is not a DUMMY_EPID.
+ * ep->next is already a physical address; no need for a virt_to_phys. */
+ *R_DMA_CH8_SUB0_EP = ep->next;
+ /* Restart the DMA */
+ *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start);
+ }
+ spin_unlock_irqrestore(&etrax_dma8_sub0_lock, flags);
+}
+
+/* queue an URB with the transfer controller (called from hcd_driver) */
+static int tc_urb_enqueue(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep,
+ struct urb *urb,
+ gfp_t mem_flags) {
+ int epid;
+ int retval;
+ int bustime = 0;
+ int maxpacket;
+ unsigned long flags;
+ struct crisv10_urb_priv *urb_priv;
+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd);
+ DBFENTER;
+
+ if(!(crisv10_hcd->running)) {
+ /* The USB Controller is not running, probably because no device is
+ attached. No idea to enqueue URBs then */
+ tc_warn("Rejected enqueueing of URB:0x%x because no dev attached\n",
+ (unsigned int)urb);
+ return -ENOENT;
+ }
+
+ maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
+ /* Special case check for In Isoc transfers. Specification states that each
+ In Isoc transfer consists of one packet and therefore it should fit into
+ the transfer-buffer of an URB.
+ We do the check here to be sure (an invalid scenario can be produced with
+ parameters to the usbtest suite) */
+ if(usb_pipeisoc(urb->pipe) && usb_pipein(urb->pipe) &&
+ (urb->transfer_buffer_length < maxpacket)) {
+ tc_err("Submit In Isoc URB with buffer length:%d to pipe with maxpacketlen: %d\n", urb->transfer_buffer_length, maxpacket);
+ return -EMSGSIZE;
+ }
+
+ /* Check if there is enough bandwidth for periodic transfer */
+ if(usb_pipeint(urb->pipe) || usb_pipeisoc(urb->pipe)) {
+ /* only check (and later claim) if not already claimed */
+ if (urb->bandwidth == 0) {
+ bustime = usb_check_bandwidth(urb->dev, urb);
+ if (bustime < 0) {
+ tc_err("Not enough periodic bandwidth\n");
+ return -ENOSPC;
+ }
+ }
+ }
+
+ /* Check if there is a epid for URBs destination, if not this function
+ set up one. */
+ epid = tc_setup_epid(ep, urb, mem_flags);
+ if (epid < 0) {
+ tc_err("Failed setup epid:%d for URB:0x%x\n", epid, (unsigned int)urb);
+ DBFEXIT;
+ return -ENOMEM;
+ }
+
+ if(urb == activeUrbList[epid]) {
+ tc_err("Resubmition of allready active URB:0x%x\n", (unsigned int)urb);
+ return -ENXIO;
+ }
+
+ if(urb_list_entry(urb, epid)) {
+ tc_err("Resubmition of allready queued URB:0x%x\n", (unsigned int)urb);
+ return -ENXIO;
+ }
+
+ /* If we actively have flaged endpoint as disabled then refuse submition */
+ if(epid_state[epid].disabled) {
+ return -ENOENT;
+ }
+
+ /* Allocate and init HC-private data for URB */
+ if(urb_priv_create(hcd, urb, epid, mem_flags) != 0) {
+ DBFEXIT;
+ return -ENOMEM;
+ }
+ urb_priv = urb->hcpriv;
+
+ tc_dbg("Enqueue URB:0x%x[%d] epid:%d (%s) bufflen:%d\n",
+ (unsigned int)urb, urb_priv->urb_num, epid,
+ pipe_to_str(urb->pipe), urb->transfer_buffer_length);
+
+ /* Create and link SBs required for this URB */
+ retval = create_sb_for_urb(urb, mem_flags);
+ if(retval != 0) {
+ tc_err("Failed to create SBs for URB:0x%x[%d]\n", (unsigned int)urb,
+ urb_priv->urb_num);
+ urb_priv_free(hcd, urb);
+ DBFEXIT;
+ return retval;
+ }
+
+ /* Init intr EP pool if this URB is a INTR transfer. This pool is later
+ used when inserting EPs in the TxIntrEPList. We do the alloc here
+ so we can't run out of memory later */
+ if(usb_pipeint(urb->pipe)) {
+ retval = init_intr_urb(urb, mem_flags);
+ if(retval != 0) {
+ tc_warn("Failed to init Intr URB\n");
+ urb_priv_free(hcd, urb);
+ DBFEXIT;
+ return retval;
+ }
+ }
+
+ /* Disable other access when inserting USB */
+ local_irq_save(flags);
+
+ /* Claim bandwidth, if needed */
+ if(bustime) {
+ usb_claim_bandwidth(urb->dev, urb, bustime, 0);
+ }
+
+ /* Add URB to EP queue */
+ urb_list_add(urb, epid, mem_flags);
+
+ if(usb_pipeisoc(urb->pipe)) {
+ /* Special processing of Isoc URBs. */
+ tc_dma_process_isoc_urb(urb);
+ } else {
+ /* Process EP queue for rest of the URB types (Bulk, Ctrl, Intr) */
+ tc_dma_process_queue(epid);
+ }
+
+ local_irq_restore(flags);
+
+ DBFEXIT;
+ return 0;
+}
+
+/* remove an URB from the transfer controller queues (called from hcd_driver)*/
+static int tc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) {
+ struct crisv10_urb_priv *urb_priv;
+ unsigned long flags;
+ int epid;
+
+ DBFENTER;
+ /* Disable interrupts here since a descriptor interrupt for the isoc epid
+ will modify the sb list. This could possibly be done more granular, but
+ urb_dequeue should not be used frequently anyway.
+ */
+ local_irq_save(flags);
+
+ urb_priv = urb->hcpriv;
+
+ if (!urb_priv) {
+ /* This happens if a device driver calls unlink on an urb that
+ was never submitted (lazy driver) or if the urb was completed
+ while dequeue was being called. */
+ tc_warn("Dequeing of not enqueued URB:0x%x\n", (unsigned int)urb);
+ local_irq_restore(flags);
+ return 0;
+ }
+ epid = urb_priv->epid;
+
+ tc_warn("Dequeing %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n",
+ (urb == activeUrbList[epid]) ? "active" : "queued",
+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
+ str_type(urb->pipe), epid, urb->status,
+ (urb_priv->later_data) ? "later-sched" : "");
+
+ /* For Bulk, Ctrl and Intr are only one URB active at a time. So any URB
+ that isn't active can be dequeued by just removing it from the queue */
+ if(usb_pipebulk(urb->pipe) || usb_pipecontrol(urb->pipe) ||
+ usb_pipeint(urb->pipe)) {
+
+ /* Check if URB haven't gone further than the queue */
+ if(urb != activeUrbList[epid]) {
+ ASSERT(urb_priv->later_data == NULL);
+ tc_warn("Dequeing URB:0x%x[%d] (%s %s epid:%d) from queue"
+ " (not active)\n", (unsigned int)urb, urb_priv->urb_num,
+ str_dir(urb->pipe), str_type(urb->pipe), epid);
+
+ /* Finish the URB with error status from USB core */
+ tc_finish_urb(hcd, urb, urb->status);
+ local_irq_restore(flags);
+ return 0;
+ }
+ }
+
+ /* Set URB status to Unlink for handling when interrupt comes. */
+ urb_priv->urb_state = UNLINK;
+
+ /* Differentiate dequeing of Bulk and Ctrl from Isoc and Intr */
+ switch(usb_pipetype(urb->pipe)) {
+ case PIPE_BULK:
+ /* Check if EP still is enabled */
+ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
+ /* The EP was enabled, disable it. */
+ TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
+ }
+ /* Kicking dummy list out of the party. */
+ TxBulkEPList[epid].next = virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]);
+ break;
+ case PIPE_CONTROL:
+ /* Check if EP still is enabled */
+ if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
+ /* The EP was enabled, disable it. */
+ TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
+ }
+ break;
+ case PIPE_ISOCHRONOUS:
+ /* Disabling, busy-wait and unlinking of Isoc SBs will be done in
+ finish_isoc_urb(). Because there might the case when URB is dequeued
+ but there are other valid URBs waiting */
+
+ /* Check if In Isoc EP still is enabled */
+ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
+ /* The EP was enabled, disable it. */
+ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
+ }
+ break;
+ case PIPE_INTERRUPT:
+ /* Special care is taken for interrupt URBs. EPs are unlinked in
+ tc_finish_urb */
+ break;
+ default:
+ break;
+ }
+
+ /* Asynchronous unlink, finish the URB later from scheduled or other
+ event (data finished, error) */
+ tc_finish_urb_later(hcd, urb, urb->status);
+
+ local_irq_restore(flags);
+ DBFEXIT;
+ return 0;
+}
+
+
+static void tc_sync_finish_epid(struct usb_hcd *hcd, int epid) {
+ volatile int timeout = 10000;
+ struct urb* urb;
+ struct crisv10_urb_priv* urb_priv;
+ unsigned long flags;
+
+ volatile struct USB_EP_Desc *first_ep; /* First EP in the list. */
+ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */
+ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */
+
+ int type = epid_state[epid].type;
+
+ /* Setting this flag will cause enqueue() to return -ENOENT for new
+ submitions on this endpoint and finish_urb() wont process queue further */
+ epid_state[epid].disabled = 1;
+
+ switch(type) {
+ case PIPE_BULK:
+ /* Check if EP still is enabled */
+ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
+ /* The EP was enabled, disable it. */
+ TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
+ tc_warn("sync_finish: Disabling EP for epid:%d\n", epid);
+
+ /* Do busy-wait until DMA not using this EP descriptor anymore */
+ while((*R_DMA_CH8_SUB0_EP ==
+ virt_to_phys(&TxBulkEPList[epid])) &&
+ (timeout-- > 0));
+ if(timeout == 0) {
+ warn("Timeout while waiting for DMA-TX-Bulk to leave EP for"
+ " epid:%d\n", epid);
+ }
+ }
+ break;
+
+ case PIPE_CONTROL:
+ /* Check if EP still is enabled */
+ if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
+ /* The EP was enabled, disable it. */
+ TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
+ tc_warn("sync_finish: Disabling EP for epid:%d\n", epid);
+
+ /* Do busy-wait until DMA not using this EP descriptor anymore */
+ while((*R_DMA_CH8_SUB1_EP ==
+ virt_to_phys(&TxCtrlEPList[epid])) &&
+ (timeout-- > 0));
+ if(timeout == 0) {
+ warn("Timeout while waiting for DMA-TX-Ctrl to leave EP for"
+ " epid:%d\n", epid);
+ }
+ }
+ break;
+
+ case PIPE_INTERRUPT:
+ local_irq_save(flags);
+ /* Disable all Intr EPs belonging to epid */
+ first_ep = &TxIntrEPList[0];
+ curr_ep = first_ep;
+ do {
+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next);
+ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) {
+ /* Disable EP */
+ next_ep->command &= ~IO_MASK(USB_EP_command, enable);
+ }
+ curr_ep = phys_to_virt(curr_ep->next);
+ } while (curr_ep != first_ep);
+
+ local_irq_restore(flags);
+ break;
+
+ case PIPE_ISOCHRONOUS:
+ /* Check if EP still is enabled */
+ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
+ tc_warn("sync_finish: Disabling Isoc EP for epid:%d\n", epid);
+ /* The EP was enabled, disable it. */
+ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
+
+ while((*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])) &&
+ (timeout-- > 0));
+ if(timeout == 0) {
+ warn("Timeout while waiting for DMA-TX-Isoc to leave EP for"
+ " epid:%d\n", epid);
+ }
+ }
+ break;
+ }
+
+ local_irq_save(flags);
+
+ /* Finish if there is active URB for this endpoint */
+ if(activeUrbList[epid] != NULL) {
+ urb = activeUrbList[epid];
+ urb_priv = urb->hcpriv;
+ ASSERT(urb_priv);
+ tc_warn("Sync finish %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n",
+ (urb == activeUrbList[epid]) ? "active" : "queued",
+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
+ str_type(urb->pipe), epid, urb->status,
+ (urb_priv->later_data) ? "later-sched" : "");
+
+ tc_finish_urb(hcd, activeUrbList[epid], -ENOENT);
+ ASSERT(activeUrbList[epid] == NULL);
+ }
+
+ /* Finish any queued URBs for this endpoint. There won't be any resubmitions
+ because epid_disabled causes enqueue() to fail for this endpoint */
+ while((urb = urb_list_first(epid)) != NULL) {
+ urb_priv = urb->hcpriv;
+ ASSERT(urb_priv);
+
+ tc_warn("Sync finish %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n",
+ (urb == activeUrbList[epid]) ? "active" : "queued",
+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
+ str_type(urb->pipe), epid, urb->status,
+ (urb_priv->later_data) ? "later-sched" : "");
+
+ tc_finish_urb(hcd, urb, -ENOENT);
+ }
+ epid_state[epid].disabled = 0;
+ local_irq_restore(flags);
+}
+
+/* free resources associated with an endpoint (called from hcd_driver) */
+static void tc_endpoint_disable(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep) {
+ DBFENTER;
+ /* Only free epid if it has been allocated. We get two endpoint_disable
+ requests for ctrl endpoints so ignore the second one */
+ if(ep->hcpriv != NULL) {
+ struct crisv10_ep_priv *ep_priv = ep->hcpriv;
+ int epid = ep_priv->epid;
+ tc_warn("endpoint_disable ep:0x%x ep-priv:0x%x (%s) (epid:%d freed)\n",
+ (unsigned int)ep, (unsigned int)ep->hcpriv,
+ endpoint_to_str(&(ep->desc)), epid);
+
+ tc_sync_finish_epid(hcd, epid);
+
+ ASSERT(activeUrbList[epid] == NULL);
+ ASSERT(list_empty(&urb_list[epid]));
+
+ tc_free_epid(ep);
+ } else {
+ tc_dbg("endpoint_disable ep:0x%x ep-priv:0x%x (%s)\n", (unsigned int)ep,
+ (unsigned int)ep->hcpriv, endpoint_to_str(&(ep->desc)));
+ }
+ DBFEXIT;
+}
+
+static void tc_finish_urb_later_proc(void *data) {
+ unsigned long flags;
+ struct urb_later_data* uld = (struct urb_later_data*)data;
+ local_irq_save(flags);
+ if(uld->urb == NULL) {
+ late_dbg("Later finish of URB = NULL (allready finished)\n");
+ } else {
+ struct crisv10_urb_priv* urb_priv = uld->urb->hcpriv;
+ ASSERT(urb_priv);
+ if(urb_priv->urb_num == uld->urb_num) {
+ late_dbg("Later finish of URB:0x%x[%d]\n", (unsigned int)(uld->urb),
+ urb_priv->urb_num);
+ if(uld->status != uld->urb->status) {
+ errno_dbg("Later-finish URB with status:%d, later-status:%d\n",
+ uld->urb->status, uld->status);
+ }
+ if(uld != urb_priv->later_data) {
+ panic("Scheduled uld not same as URBs uld\n");
+ }
+ tc_finish_urb(uld->hcd, uld->urb, uld->status);
+ } else {
+ late_warn("Ignoring later finish of URB:0x%x[%d]"
+ ", urb_num doesn't match current URB:0x%x[%d]",
+ (unsigned int)(uld->urb), uld->urb_num,
+ (unsigned int)(uld->urb), urb_priv->urb_num);
+ }
+ }
+ local_irq_restore(flags);
+ kmem_cache_free(later_data_cache, uld);
+}
+
+static void tc_finish_urb_later(struct usb_hcd *hcd, struct urb *urb,
+ int status) {
+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
+ struct urb_later_data* uld;
+
+ ASSERT(urb_priv);
+
+ if(urb_priv->later_data != NULL) {
+ /* Later-finish allready scheduled for this URB, just update status to
+ return when finishing later */
+ errno_dbg("Later-finish schedule change URB status:%d with new"
+ " status:%d\n", urb_priv->later_data->status, status);
+
+ urb_priv->later_data->status = status;
+ return;
+ }
+
+ uld = kmem_cache_alloc(later_data_cache, SLAB_ATOMIC);
+ ASSERT(uld);
+
+ uld->hcd = hcd;
+ uld->urb = urb;
+ uld->urb_num = urb_priv->urb_num;
+ uld->status = status;
+
+ INIT_WORK(&uld->ws, tc_finish_urb_later_proc, uld);
+ urb_priv->later_data = uld;
+
+ /* Schedule the finishing of the URB to happen later */
+ schedule_delayed_work(&uld->ws, LATER_TIMER_DELAY);
+}
+
+static void tc_finish_isoc_urb(struct usb_hcd *hcd, struct urb *urb,
+ int status);
+
+static void tc_finish_urb(struct usb_hcd *hcd, struct urb *urb, int status) {
+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd);
+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
+ int epid;
+ char toggle;
+ int urb_num;
+
+ DBFENTER;
+ ASSERT(urb_priv != NULL);
+ epid = urb_priv->epid;
+ urb_num = urb_priv->urb_num;
+
+ if(urb != activeUrbList[epid]) {
+ if(urb_list_entry(urb, epid)) {
+ /* Remove this URB from the list. Only happens when URB are finished
+ before having been processed (dequeing) */
+ urb_list_del(urb, epid);
+ } else {
+ tc_warn("Finishing of URB:0x%x[%d] neither active or in queue for"
+ " epid:%d\n", (unsigned int)urb, urb_num, epid);
+ }
+ }
+
+ /* Cancel any pending later-finish of this URB */
+ if(urb_priv->later_data) {
+ urb_priv->later_data->urb = NULL;
+ }
+
+ /* For an IN pipe, we always set the actual length, regardless of whether
+ there was an error or not (which means the device driver can use the data
+ if it wants to). */
+ if(usb_pipein(urb->pipe)) {
+ urb->actual_length = urb_priv->rx_offset;
+ } else {
+ /* Set actual_length for OUT urbs also; the USB mass storage driver seems
+ to want that. */
+ if (status == 0 && urb->status == -EINPROGRESS) {
+ urb->actual_length = urb->transfer_buffer_length;
+ } else {
+ /* We wouldn't know of any partial writes if there was an error. */
+ urb->actual_length = 0;
+ }
+ }
+
+
+ /* URB status mangling */
+ if(urb->status == -EINPROGRESS) {
+ /* The USB core hasn't changed the status, let's set our finish status */
+ urb->status = status;
+
+ if ((status == 0) && (urb->transfer_flags & URB_SHORT_NOT_OK) &&
+ usb_pipein(urb->pipe) &&
+ (urb->actual_length != urb->transfer_buffer_length)) {
+ /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's
+ max length) is to be treated as an error. */
+ errno_dbg("Finishing URB:0x%x[%d] with SHORT_NOT_OK flag and short"
+ " data:%d\n", (unsigned int)urb, urb_num,
+ urb->actual_length);
+ urb->status = -EREMOTEIO;
+ }
+
+ if(urb_priv->urb_state == UNLINK) {
+ /* URB has been requested to be unlinked asynchronously */
+ urb->status = -ECONNRESET;
+ errno_dbg("Fixing unlink status of URB:0x%x[%d] to:%d\n",
+ (unsigned int)urb, urb_num, urb->status);
+ }
+ } else {
+ /* The USB Core wants to signal some error via the URB, pass it through */
+ }
+
+ /* use completely different finish function for Isoc URBs */
+ if(usb_pipeisoc(urb->pipe)) {
+ tc_finish_isoc_urb(hcd, urb, status);
+ return;
+ }
+
+ /* Do special unlinking of EPs for Intr traffic */
+ if(usb_pipeint(urb->pipe)) {
+ tc_dma_unlink_intr_urb(urb);
+ }
+
+ /* Release allocated bandwidth for periodic transfers */
+ if(usb_pipeint(urb->pipe) || usb_pipeisoc(urb->pipe))
+ usb_release_bandwidth(urb->dev, urb, 0);
+
+ /* This URB is active on EP */
+ if(urb == activeUrbList[epid]) {
+ /* We need to fiddle with the toggle bits because the hardware doesn't do
+ it for us. */
+ toggle = etrax_epid_get_toggle(epid, usb_pipeout(urb->pipe));
+ usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+ usb_pipeout(urb->pipe), toggle);
+
+ /* Checks for Ctrl and Bulk EPs */
+ switch(usb_pipetype(urb->pipe)) {
+ case PIPE_BULK:
+ /* Check so Bulk EP realy is disabled before finishing active URB */
+ ASSERT((TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) ==
+ IO_STATE(USB_EP_command, enable, no));
+ /* Disable sub-pointer for EP to avoid next tx_interrupt() to
+ process Bulk EP. */
+ TxBulkEPList[epid].sub = 0;
+ /* No need to wait for the DMA before changing the next pointer.
+ The modulo NBR_OF_EPIDS isn't actually necessary, since we will never use
+ the last one (INVALID_EPID) for actual traffic. */
+ TxBulkEPList[epid].next =
+ virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]);
+ break;
+ case PIPE_CONTROL:
+ /* Check so Ctrl EP realy is disabled before finishing active URB */
+ ASSERT((TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) ==
+ IO_STATE(USB_EP_command, enable, no));
+ /* Disable sub-pointer for EP to avoid next tx_interrupt() to
+ process Ctrl EP. */
+ TxCtrlEPList[epid].sub = 0;
+ break;
+ }
+ }
+
+ /* Free HC-private URB data*/
+ urb_priv_free(hcd, urb);
+
+ if(urb->status) {
+ errno_dbg("finish_urb (URB:0x%x[%d] %s %s) (data:%d) status:%d\n",
+ (unsigned int)urb, urb_num, str_dir(urb->pipe),
+ str_type(urb->pipe), urb->actual_length, urb->status);
+ } else {
+ tc_dbg("finish_urb (URB:0x%x[%d] %s %s) (data:%d) status:%d\n",
+ (unsigned int)urb, urb_num, str_dir(urb->pipe),
+ str_type(urb->pipe), urb->actual_length, urb->status);
+ }
+
+ /* If we just finished an active URB, clear active pointer. */
+ if (urb == activeUrbList[epid]) {
+ /* Make URB not active on EP anymore */
+ activeUrbList[epid] = NULL;
+
+ if(urb->status == 0) {
+ /* URB finished sucessfully, process queue to see if there are any more
+ URBs waiting before we call completion function.*/
+ if(crisv10_hcd->running) {
+ /* Only process queue if USB controller is running */
+ tc_dma_process_queue(epid);
+ } else {
+ tc_warn("No processing of queue for epid:%d, USB Controller not"
+ " running\n", epid);
+ }
+ }
+ }
+
+ /* Hand the URB from HCD to its USB device driver, using its completion
+ functions */
+ usb_hcd_giveback_urb (hcd, urb);
+
+ /* Check the queue once more if the URB returned with error, because we
+ didn't do it before the completion function because the specification
+ states that the queue should not restart until all it's unlinked
+ URBs have been fully retired, with the completion functions run */
+ if(crisv10_hcd->running) {
+ /* Only process queue if USB controller is running */
+ tc_dma_process_queue(epid);
+ } else {
+ tc_warn("No processing of queue for epid:%d, USB Controller not running\n",
+ epid);
+ }
+
+ DBFEXIT;
+}
+
+static void tc_finish_isoc_urb(struct usb_hcd *hcd, struct urb *urb,
+ int status) {
+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
+ int epid, i;
+ volatile int timeout = 10000;
+
+ ASSERT(urb_priv);
+ epid = urb_priv->epid;
+
+ ASSERT(usb_pipeisoc(urb->pipe));
+
+ /* Set that all isoc packets have status and length set before
+ completing the urb. */
+ for (i = urb_priv->isoc_packet_counter; i < urb->number_of_packets; i++){
+ urb->iso_frame_desc[i].actual_length = 0;
+ urb->iso_frame_desc[i].status = -EPROTO;
+ }
+
+ /* Check if the URB is currently active (done or error) */
+ if(urb == activeUrbList[epid]) {
+ /* Check if there are another In Isoc URB queued for this epid */
+ if (!list_empty(&urb_list[epid])&& !epid_state[epid].disabled) {
+ /* Move it from queue to active and mark it started so Isoc transfers
+ won't be interrupted.
+ All Isoc URBs data transfers are already added to DMA lists so we
+ don't have to insert anything in DMA lists here. */
+ activeUrbList[epid] = urb_list_first(epid);
+ ((struct crisv10_urb_priv *)(activeUrbList[epid]->hcpriv))->urb_state =
+ STARTED;
+ urb_list_del(activeUrbList[epid], epid);
+
+ if(urb->status) {
+ errno_dbg("finish_isoc_urb (URB:0x%x[%d] %s %s) (%d of %d packets)"
+ " status:%d, new waiting URB:0x%x[%d]\n",
+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
+ str_type(urb->pipe), urb_priv->isoc_packet_counter,
+ urb->number_of_packets, urb->status,
+ (unsigned int)activeUrbList[epid],
+ ((struct crisv10_urb_priv *)(activeUrbList[epid]->hcpriv))->urb_num);
+ }
+
+ } else { /* No other URB queued for this epid */
+ if(urb->status) {
+ errno_dbg("finish_isoc_urb (URB:0x%x[%d] %s %s) (%d of %d packets)"
+ " status:%d, no new URB waiting\n",
+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
+ str_type(urb->pipe), urb_priv->isoc_packet_counter,
+ urb->number_of_packets, urb->status);
+ }
+
+ /* Check if EP is still enabled, then shut it down. */
+ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
+ isoc_dbg("Isoc EP enabled for epid:%d, disabling it\n", epid);
+
+ /* Should only occur for In Isoc EPs where SB isn't consumed. */
+ ASSERT(usb_pipein(urb->pipe));
+
+ /* Disable it and wait for it to stop */
+ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
+
+ /* Ah, the luxury of busy-wait. */
+ while((*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])) &&
+ (timeout-- > 0));
+ if(timeout == 0) {
+ warn("Timeout while waiting for DMA-TX-Isoc to leave EP for epid:%d\n", epid);
+ }
+ }
+
+ /* Unlink SB to say that epid is finished. */
+ TxIsocEPList[epid].sub = 0;
+ TxIsocEPList[epid].hw_len = 0;
+
+ /* No URB active for EP anymore */
+ activeUrbList[epid] = NULL;
+ }
+ } else { /* Finishing of not active URB (queued up with SBs thought) */
+ isoc_warn("finish_isoc_urb (URB:0x%x %s) (%d of %d packets) status:%d,"
+ " SB queued but not active\n",
+ (unsigned int)urb, str_dir(urb->pipe),
+ urb_priv->isoc_packet_counter, urb->number_of_packets,
+ urb->status);
+ if(usb_pipeout(urb->pipe)) {
+ /* Finishing of not yet active Out Isoc URB needs unlinking of SBs. */
+ struct USB_SB_Desc *iter_sb, *prev_sb, *next_sb;
+
+ iter_sb = TxIsocEPList[epid].sub ?
+ phys_to_virt(TxIsocEPList[epid].sub) : 0;
+ prev_sb = 0;
+
+ /* SB that is linked before this URBs first SB */
+ while (iter_sb && (iter_sb != urb_priv->first_sb)) {
+ prev_sb = iter_sb;
+ iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
+ }
+
+ if (iter_sb == 0) {
+ /* Unlink of the URB currently being transmitted. */
+ prev_sb = 0;
+ iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0;
+ }
+
+ while (iter_sb && (iter_sb != urb_priv->last_sb)) {
+ iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
+ }
+
+ if (iter_sb) {
+ next_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
+ } else {
+ /* This should only happen if the DMA has completed
+ processing the SB list for this EP while interrupts
+ are disabled. */
+ isoc_dbg("Isoc urb not found, already sent?\n");
+ next_sb = 0;
+ }
+ if (prev_sb) {
+ prev_sb->next = next_sb ? virt_to_phys(next_sb) : 0;
+ } else {
+ TxIsocEPList[epid].sub = next_sb ? virt_to_phys(next_sb) : 0;
+ }
+ }
+ }
+
+ /* Free HC-private URB data*/
+ urb_priv_free(hcd, urb);
+
+ usb_release_bandwidth(urb->dev, urb, 0);
+
+ /* Hand the URB from HCD to its USB device driver, using its completion
+ functions */
+ usb_hcd_giveback_urb (hcd, urb);
+}
+
+static __u32 urb_num = 0;
+
+/* allocate and initialize URB private data */
+static int urb_priv_create(struct usb_hcd *hcd, struct urb *urb, int epid,
+ int mem_flags) {
+ struct crisv10_urb_priv *urb_priv;
+
+ urb_priv = kmalloc(sizeof *urb_priv, mem_flags);
+ if (!urb_priv)
+ return -ENOMEM;
+ memset(urb_priv, 0, sizeof *urb_priv);
+
+ urb_priv->epid = epid;
+ urb_priv->urb_state = NOT_STARTED;
+
+ urb->hcpriv = urb_priv;
+ /* Assign URB a sequence number, and increment counter */
+ urb_priv->urb_num = urb_num;
+ urb_num++;
+ return 0;
+}
+
+/* free URB private data */
+static void urb_priv_free(struct usb_hcd *hcd, struct urb *urb) {
+ int i;
+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
+ ASSERT(urb_priv != 0);
+
+ /* Check it has any SBs linked that needs to be freed*/
+ if(urb_priv->first_sb != NULL) {
+ struct USB_SB_Desc *next_sb, *first_sb, *last_sb;
+ int i = 0;
+ first_sb = urb_priv->first_sb;
+ last_sb = urb_priv->last_sb;
+ ASSERT(last_sb);
+ while(first_sb != last_sb) {
+ next_sb = (struct USB_SB_Desc *)phys_to_virt(first_sb->next);
+ kmem_cache_free(usb_desc_cache, first_sb);
+ first_sb = next_sb;
+ i++;
+ }
+ kmem_cache_free(usb_desc_cache, last_sb);
+ i++;
+ }
+
+ /* Check if it has any EPs in its Intr pool that also needs to be freed */
+ if(urb_priv->intr_ep_pool_length > 0) {
+ for(i = 0; i < urb_priv->intr_ep_pool_length; i++) {
+ kfree(urb_priv->intr_ep_pool[i]);
+ }
+ /*
+ tc_dbg("Freed %d EPs from URB:0x%x EP pool\n",
+ urb_priv->intr_ep_pool_length, (unsigned int)urb);
+ */
+ }
+
+ kfree(urb_priv);
+ urb->hcpriv = NULL;
+}
+
+static int ep_priv_create(struct usb_host_endpoint *ep, int mem_flags) {
+ struct crisv10_ep_priv *ep_priv;
+
+ ep_priv = kmalloc(sizeof *ep_priv, mem_flags);
+ if (!ep_priv)
+ return -ENOMEM;
+ memset(ep_priv, 0, sizeof *ep_priv);
+
+ ep->hcpriv = ep_priv;
+ return 0;
+}
+
+static void ep_priv_free(struct usb_host_endpoint *ep) {
+ struct crisv10_ep_priv *ep_priv = ep->hcpriv;
+ ASSERT(ep_priv);
+ kfree(ep_priv);
+ ep->hcpriv = NULL;
+}
+
+/* EPID handling functions, managing EP-list in Etrax through wrappers */
+/* ------------------------------------------------------------------- */
+
+/* Sets up a new EPID for an endpoint or returns existing if found */
+static int tc_setup_epid(struct usb_host_endpoint *ep, struct urb *urb,
+ int mem_flags) {
+ int epid;
+ char devnum, endpoint, out_traffic, slow;
+ int maxlen;
+ __u32 epid_data;
+ struct crisv10_ep_priv *ep_priv = ep->hcpriv;
+
+ DBFENTER;
+
+ /* Check if a valid epid already is setup for this endpoint */
+ if(ep_priv != NULL) {
+ return ep_priv->epid;
+ }
+
+ /* We must find and initiate a new epid for this urb. */
+ epid = tc_allocate_epid();
+
+ if (epid == -1) {
+ /* Failed to allocate a new epid. */
+ DBFEXIT;
+ return epid;
+ }
+
+ /* We now have a new epid to use. Claim it. */
+ epid_state[epid].inuse = 1;
+
+ /* Init private data for new endpoint */
+ if(ep_priv_create(ep, mem_flags) != 0) {
+ return -ENOMEM;
+ }
+ ep_priv = ep->hcpriv;
+ ep_priv->epid = epid;
+
+ devnum = usb_pipedevice(urb->pipe);
+ endpoint = usb_pipeendpoint(urb->pipe);
+ slow = (urb->dev->speed == USB_SPEED_LOW);
+ maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
+
+ if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
+ /* We want both IN and OUT control traffic to be put on the same
+ EP/SB list. */
+ out_traffic = 1;
+ } else {
+ out_traffic = usb_pipeout(urb->pipe);
+ }
+
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+ epid_data = IO_STATE(R_USB_EPT_DATA_ISO, valid, yes) |
+ /* FIXME: Change any to the actual port? */
+ IO_STATE(R_USB_EPT_DATA_ISO, port, any) |
+ IO_FIELD(R_USB_EPT_DATA_ISO, max_len, maxlen) |
+ IO_FIELD(R_USB_EPT_DATA_ISO, ep, endpoint) |
+ IO_FIELD(R_USB_EPT_DATA_ISO, dev, devnum);
+ etrax_epid_iso_set(epid, epid_data);
+ } else {
+ epid_data = IO_STATE(R_USB_EPT_DATA, valid, yes) |
+ IO_FIELD(R_USB_EPT_DATA, low_speed, slow) |
+ /* FIXME: Change any to the actual port? */
+ IO_STATE(R_USB_EPT_DATA, port, any) |
+ IO_FIELD(R_USB_EPT_DATA, max_len, maxlen) |
+ IO_FIELD(R_USB_EPT_DATA, ep, endpoint) |
+ IO_FIELD(R_USB_EPT_DATA, dev, devnum);
+ etrax_epid_set(epid, epid_data);
+ }
+
+ epid_state[epid].out_traffic = out_traffic;
+ epid_state[epid].type = usb_pipetype(urb->pipe);
+
+ tc_warn("Setting up ep:0x%x epid:%d (addr:%d endp:%d max_len:%d %s %s %s)\n",
+ (unsigned int)ep, epid, devnum, endpoint, maxlen,
+ str_type(urb->pipe), out_traffic ? "out" : "in",
+ slow ? "low" : "full");
+
+ /* Enable Isoc eof interrupt if we set up the first Isoc epid */
+ if(usb_pipeisoc(urb->pipe)) {
+ isoc_epid_counter++;
+ if(isoc_epid_counter == 1) {
+ isoc_warn("Enabled Isoc eof interrupt\n");
+ *R_USB_IRQ_MASK_SET |= IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set);
+ }
+ }
+
+ DBFEXIT;
+ return epid;
+}
+
+static void tc_free_epid(struct usb_host_endpoint *ep) {
+ unsigned long flags;
+ struct crisv10_ep_priv *ep_priv = ep->hcpriv;
+ int epid;
+ volatile int timeout = 10000;
+
+ DBFENTER;
+
+ if (ep_priv == NULL) {
+ tc_warn("Trying to free unused epid on ep:0x%x\n", (unsigned int)ep);
+ DBFEXIT;
+ return;
+ }
+
+ epid = ep_priv->epid;
+
+ /* Disable Isoc eof interrupt if we free the last Isoc epid */
+ if(epid_isoc(epid)) {
+ ASSERT(isoc_epid_counter > 0);
+ isoc_epid_counter--;
+ if(isoc_epid_counter == 0) {
+ *R_USB_IRQ_MASK_SET &= ~IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set);
+ isoc_warn("Disabled Isoc eof interrupt\n");
+ }
+ }
+
+ /* Take lock manualy instead of in epid_x_x wrappers,
+ because we need to be polling here */
+ spin_lock_irqsave(&etrax_epid_lock, flags);
+
+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
+ nop();
+ while((*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) &&
+ (timeout-- > 0));
+ if(timeout == 0) {
+ warn("Timeout while waiting for epid:%d to drop hold\n", epid);
+ }
+ /* This will, among other things, set the valid field to 0. */
+ *R_USB_EPT_DATA = 0;
+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
+
+ /* Free resource in software state info list */
+ epid_state[epid].inuse = 0;
+
+ /* Free private endpoint data */
+ ep_priv_free(ep);
+
+ DBFEXIT;
+}
+
+static int tc_allocate_epid(void) {
+ int i;
+ DBFENTER;
+ for (i = 0; i < NBR_OF_EPIDS; i++) {
+ if (!epid_inuse(i)) {
+ DBFEXIT;
+ return i;
+ }
+ }
+
+ tc_warn("Found no free epids\n");
+ DBFEXIT;
+ return -1;
+}
+
+
+/* Wrappers around the list functions (include/linux/list.h). */
+/* ---------------------------------------------------------- */
+static inline int __urb_list_empty(int epid) {
+ int retval;
+ retval = list_empty(&urb_list[epid]);
+ return retval;
+}
+
+/* Returns first urb for this epid, or NULL if list is empty. */
+static inline struct urb *urb_list_first(int epid) {
+ unsigned long flags;
+ struct urb *first_urb = 0;
+ spin_lock_irqsave(&urb_list_lock, flags);
+ if (!__urb_list_empty(epid)) {
+ /* Get the first urb (i.e. head->next). */
+ urb_entry_t *urb_entry = list_entry((&urb_list[epid])->next, urb_entry_t, list);
+ first_urb = urb_entry->urb;
+ }
+ spin_unlock_irqrestore(&urb_list_lock, flags);
+ return first_urb;
+}
+
+/* Adds an urb_entry last in the list for this epid. */
+static inline void urb_list_add(struct urb *urb, int epid, int mem_flags) {
+ unsigned long flags;
+ urb_entry_t *urb_entry = (urb_entry_t *)kmalloc(sizeof(urb_entry_t), mem_flags);
+ ASSERT(urb_entry);
+
+ urb_entry->urb = urb;
+ spin_lock_irqsave(&urb_list_lock, flags);
+ list_add_tail(&urb_entry->list, &urb_list[epid]);
+ spin_unlock_irqrestore(&urb_list_lock, flags);
+}
+
+/* Search through the list for an element that contains this urb. (The list
+ is expected to be short and the one we are about to delete will often be
+ the first in the list.)
+ Should be protected by spin_locks in calling function */
+static inline urb_entry_t *__urb_list_entry(struct urb *urb, int epid) {
+ struct list_head *entry;
+ struct list_head *tmp;
+ urb_entry_t *urb_entry;
+
+ list_for_each_safe(entry, tmp, &urb_list[epid]) {
+ urb_entry = list_entry(entry, urb_entry_t, list);
+ ASSERT(urb_entry);
+ ASSERT(urb_entry->urb);
+
+ if (urb_entry->urb == urb) {
+ return urb_entry;
+ }
+ }
+ return 0;
+}
+
+/* Same function as above but for global use. Protects list by spinlock */
+static inline urb_entry_t *urb_list_entry(struct urb *urb, int epid) {
+ unsigned long flags;
+ urb_entry_t *urb_entry;
+ spin_lock_irqsave(&urb_list_lock, flags);
+ urb_entry = __urb_list_entry(urb, epid);
+ spin_unlock_irqrestore(&urb_list_lock, flags);
+ return (urb_entry);
+}
+
+/* Delete an urb from the list. */
+static inline void urb_list_del(struct urb *urb, int epid) {
+ unsigned long flags;
+ urb_entry_t *urb_entry;
+
+ /* Delete entry and free. */
+ spin_lock_irqsave(&urb_list_lock, flags);
+ urb_entry = __urb_list_entry(urb, epid);
+ ASSERT(urb_entry);
+
+ list_del(&urb_entry->list);
+ spin_unlock_irqrestore(&urb_list_lock, flags);
+ kfree(urb_entry);
+}
+
+/* Move an urb to the end of the list. */
+static inline void urb_list_move_last(struct urb *urb, int epid) {
+ unsigned long flags;
+ urb_entry_t *urb_entry;
+
+ spin_lock_irqsave(&urb_list_lock, flags);
+ urb_entry = __urb_list_entry(urb, epid);
+ ASSERT(urb_entry);
+
+ list_del(&urb_entry->list);
+ list_add_tail(&urb_entry->list, &urb_list[epid]);
+ spin_unlock_irqrestore(&urb_list_lock, flags);
+}
+
+/* Get the next urb in the list. */
+static inline struct urb *urb_list_next(struct urb *urb, int epid) {
+ unsigned long flags;
+ urb_entry_t *urb_entry;
+
+ spin_lock_irqsave(&urb_list_lock, flags);
+ urb_entry = __urb_list_entry(urb, epid);
+ ASSERT(urb_entry);
+
+ if (urb_entry->list.next != &urb_list[epid]) {
+ struct list_head *elem = urb_entry->list.next;
+ urb_entry = list_entry(elem, urb_entry_t, list);
+ spin_unlock_irqrestore(&urb_list_lock, flags);
+ return urb_entry->urb;
+ } else {
+ spin_unlock_irqrestore(&urb_list_lock, flags);
+ return NULL;
+ }
+}
+
+struct USB_EP_Desc* create_ep(int epid, struct USB_SB_Desc* sb_desc,
+ int mem_flags) {
+ struct USB_EP_Desc *ep_desc;
+ ep_desc = (struct USB_EP_Desc *) kmem_cache_alloc(usb_desc_cache, mem_flags);
+ if(ep_desc == NULL)
+ return NULL;
+ memset(ep_desc, 0, sizeof(struct USB_EP_Desc));
+
+ ep_desc->hw_len = 0;
+ ep_desc->command = (IO_FIELD(USB_EP_command, epid, epid) |
+ IO_STATE(USB_EP_command, enable, yes));
+ if(sb_desc == NULL) {
+ ep_desc->sub = 0;
+ } else {
+ ep_desc->sub = virt_to_phys(sb_desc);
+ }
+ return ep_desc;
+}
+
+#define TT_ZOUT 0
+#define TT_IN 1
+#define TT_OUT 2
+#define TT_SETUP 3
+
+#define CMD_EOL IO_STATE(USB_SB_command, eol, yes)
+#define CMD_INTR IO_STATE(USB_SB_command, intr, yes)
+#define CMD_FULL IO_STATE(USB_SB_command, full, yes)
+
+/* Allocation and setup of a generic SB. Used to create SETUP, OUT and ZOUT
+ SBs. Also used by create_sb_in() to avoid same allocation procedure at two
+ places */
+struct USB_SB_Desc* create_sb(struct USB_SB_Desc* sb_prev, int tt, void* data,
+ int datalen, int mem_flags) {
+ struct USB_SB_Desc *sb_desc;
+ sb_desc = (struct USB_SB_Desc*)kmem_cache_alloc(usb_desc_cache, mem_flags);
+ if(sb_desc == NULL)
+ return NULL;
+ memset(sb_desc, 0, sizeof(struct USB_SB_Desc));
+
+ sb_desc->command = IO_FIELD(USB_SB_command, tt, tt) |
+ IO_STATE(USB_SB_command, eot, yes);
+
+ sb_desc->sw_len = datalen;
+ if(data != NULL) {
+ sb_desc->buf = virt_to_phys(data);
+ } else {
+ sb_desc->buf = 0;
+ }
+ if(sb_prev != NULL) {
+ sb_prev->next = virt_to_phys(sb_desc);
+ }
+ return sb_desc;
+}
+
+/* Creates a copy of an existing SB by allocation space for it and copy
+ settings */
+struct USB_SB_Desc* create_sb_copy(struct USB_SB_Desc* sb_orig, int mem_flags) {
+ struct USB_SB_Desc *sb_desc;
+ sb_desc = (struct USB_SB_Desc*)kmem_cache_alloc(usb_desc_cache, mem_flags);
+ if(sb_desc == NULL)
+ return NULL;
+
+ memcpy(sb_desc, sb_orig, sizeof(struct USB_SB_Desc));
+ return sb_desc;
+}
+
+/* A specific create_sb function for creation of in SBs. This is due to
+ that datalen in In SBs shows how many packets we are expecting. It also
+ sets up the rem field to show if how many bytes we expect in last packet
+ if it's not a full one */
+struct USB_SB_Desc* create_sb_in(struct USB_SB_Desc* sb_prev, int datalen,
+ int maxlen, int mem_flags) {
+ struct USB_SB_Desc *sb_desc;
+ sb_desc = create_sb(sb_prev, TT_IN, NULL,
+ datalen ? (datalen - 1) / maxlen + 1 : 0, mem_flags);
+ if(sb_desc == NULL)
+ return NULL;
+ sb_desc->command |= IO_FIELD(USB_SB_command, rem, datalen % maxlen);
+ return sb_desc;
+}
+
+void set_sb_cmds(struct USB_SB_Desc *sb_desc, __u16 flags) {
+ sb_desc->command |= flags;
+}
+
+int create_sb_for_urb(struct urb *urb, int mem_flags) {
+ int is_out = !usb_pipein(urb->pipe);
+ int type = usb_pipetype(urb->pipe);
+ int maxlen = usb_maxpacket(urb->dev, urb->pipe, is_out);
+ int buf_len = urb->transfer_buffer_length;
+ void *buf = buf_len > 0 ? urb->transfer_buffer : NULL;
+ struct USB_SB_Desc *sb_desc = NULL;
+
+ struct crisv10_urb_priv *urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
+ ASSERT(urb_priv != NULL);
+
+ switch(type) {
+ case PIPE_CONTROL:
+ /* Setup stage */
+ sb_desc = create_sb(NULL, TT_SETUP, urb->setup_packet, 8, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+ set_sb_cmds(sb_desc, CMD_FULL);
+
+ /* Attach first SB to URB */
+ urb_priv->first_sb = sb_desc;
+
+ if (is_out) { /* Out Control URB */
+ /* If this Control OUT transfer has an optional data stage we add
+ an OUT token before the mandatory IN (status) token */
+ if ((buf_len > 0) && buf) {
+ sb_desc = create_sb(sb_desc, TT_OUT, buf, buf_len, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+ set_sb_cmds(sb_desc, CMD_FULL);
+ }
+
+ /* Status stage */
+ /* The data length has to be exactly 1. This is due to a requirement
+ of the USB specification that a host must be prepared to receive
+ data in the status phase */
+ sb_desc = create_sb(sb_desc, TT_IN, NULL, 1, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+ } else { /* In control URB */
+ /* Data stage */
+ sb_desc = create_sb_in(sb_desc, buf_len, maxlen, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+
+ /* Status stage */
+ /* Read comment at zout_buffer declaration for an explanation to this. */
+ sb_desc = create_sb(sb_desc, TT_ZOUT, &zout_buffer[0], 1, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+ /* Set descriptor interrupt flag for in URBs so we can finish URB after
+ zout-packet has been sent */
+ set_sb_cmds(sb_desc, CMD_INTR | CMD_FULL);
+ }
+ /* Set end-of-list flag in last SB */
+ set_sb_cmds(sb_desc, CMD_EOL);
+ /* Attach last SB to URB */
+ urb_priv->last_sb = sb_desc;
+ break;
+
+ case PIPE_BULK:
+ if (is_out) { /* Out Bulk URB */
+ sb_desc = create_sb(NULL, TT_OUT, buf, buf_len, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+ /* The full field is set to yes, even if we don't actually check that
+ this is a full-length transfer (i.e., that transfer_buffer_length %
+ maxlen = 0).
+ Setting full prevents the USB controller from sending an empty packet
+ in that case. However, if URB_ZERO_PACKET was set we want that. */
+ if (!(urb->transfer_flags & URB_ZERO_PACKET)) {
+ set_sb_cmds(sb_desc, CMD_FULL);
+ }
+ } else { /* In Bulk URB */
+ sb_desc = create_sb_in(NULL, buf_len, maxlen, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+ }
+ /* Set end-of-list flag for last SB */
+ set_sb_cmds(sb_desc, CMD_EOL);
+
+ /* Attach SB to URB */
+ urb_priv->first_sb = sb_desc;
+ urb_priv->last_sb = sb_desc;
+ break;
+
+ case PIPE_INTERRUPT:
+ if(is_out) { /* Out Intr URB */
+ sb_desc = create_sb(NULL, TT_OUT, buf, buf_len, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+
+ /* The full field is set to yes, even if we don't actually check that
+ this is a full-length transfer (i.e., that transfer_buffer_length %
+ maxlen = 0).
+ Setting full prevents the USB controller from sending an empty packet
+ in that case. However, if URB_ZERO_PACKET was set we want that. */
+ if (!(urb->transfer_flags & URB_ZERO_PACKET)) {
+ set_sb_cmds(sb_desc, CMD_FULL);
+ }
+ /* Only generate TX interrupt if it's a Out URB*/
+ set_sb_cmds(sb_desc, CMD_INTR);
+
+ } else { /* In Intr URB */
+ sb_desc = create_sb_in(NULL, buf_len, maxlen, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+ }
+ /* Set end-of-list flag for last SB */
+ set_sb_cmds(sb_desc, CMD_EOL);
+
+ /* Attach SB to URB */
+ urb_priv->first_sb = sb_desc;
+ urb_priv->last_sb = sb_desc;
+
+ break;
+ case PIPE_ISOCHRONOUS:
+ if(is_out) { /* Out Isoc URB */
+ int i;
+ if(urb->number_of_packets == 0) {
+ tc_err("Can't create SBs for Isoc URB with zero packets\n");
+ return -EPIPE;
+ }
+ /* Create one SB descriptor for each packet and link them together. */
+ for(i = 0; i < urb->number_of_packets; i++) {
+ if (urb->iso_frame_desc[i].length > 0) {
+
+ sb_desc = create_sb(sb_desc, TT_OUT, urb->transfer_buffer +
+ urb->iso_frame_desc[i].offset,
+ urb->iso_frame_desc[i].length, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+
+ /* Check if it's a full length packet */
+ if (urb->iso_frame_desc[i].length ==
+ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) {
+ set_sb_cmds(sb_desc, CMD_FULL);
+ }
+
+ } else { /* zero length packet */
+ sb_desc = create_sb(sb_desc, TT_ZOUT, &zout_buffer[0], 1, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+ set_sb_cmds(sb_desc, CMD_FULL);
+ }
+ /* Attach first SB descriptor to URB */
+ if (i == 0) {
+ urb_priv->first_sb = sb_desc;
+ }
+ }
+ /* Set interrupt and end-of-list flags in last SB */
+ set_sb_cmds(sb_desc, CMD_INTR | CMD_EOL);
+ /* Attach last SB descriptor to URB */
+ urb_priv->last_sb = sb_desc;
+ tc_dbg("Created %d out SBs for Isoc URB:0x%x\n",
+ urb->number_of_packets, (unsigned int)urb);
+ } else { /* In Isoc URB */
+ /* Actual number of packets is not relevant for periodic in traffic as
+ long as it is more than zero. Set to 1 always. */
+ sb_desc = create_sb(sb_desc, TT_IN, NULL, 1, mem_flags);
+ if(sb_desc == NULL)
+ return -ENOMEM;
+ /* Set end-of-list flags for SB */
+ set_sb_cmds(sb_desc, CMD_EOL);
+
+ /* Attach SB to URB */
+ urb_priv->first_sb = sb_desc;
+ urb_priv->last_sb = sb_desc;
+ }
+ break;
+ default:
+ tc_err("Unknown pipe-type\n");
+ return -EPIPE;
+ break;
+ }
+ return 0;
+}
+
+int init_intr_urb(struct urb *urb, int mem_flags) {
+ struct crisv10_urb_priv *urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
+ struct USB_EP_Desc* ep_desc;
+ int interval;
+ int i;
+ int ep_count;
+
+ ASSERT(urb_priv != NULL);
+ ASSERT(usb_pipeint(urb->pipe));
+ /* We can't support interval longer than amount of eof descriptors in
+ TxIntrEPList */
+ if(urb->interval > MAX_INTR_INTERVAL) {
+ tc_err("Interrupt interval %dms too big (max: %dms)\n", urb->interval,
+ MAX_INTR_INTERVAL);
+ return -EINVAL;
+ }
+
+ /* We assume that the SB descriptors already have been setup */
+ ASSERT(urb_priv->first_sb != NULL);
+
+ /* Round of the interval to 2^n, it is obvious that this code favours
+ smaller numbers, but that is actually a good thing */
+ /* FIXME: The "rounding error" for larger intervals will be quite
+ large. For in traffic this shouldn't be a problem since it will only
+ mean that we "poll" more often. */
+ interval = urb->interval;
+ for (i = 0; interval; i++) {
+ interval = interval >> 1;
+ }
+ urb_priv->interval = 1 << (i - 1);
+
+ /* We can only have max interval for Out Interrupt due to that we can only
+ handle one linked in EP for a certain epid in the Intr descr array at the
+ time. The USB Controller in the Etrax 100LX continues to process Intr EPs
+ so we have no way of knowing which one that caused the actual transfer if
+ we have several linked in. */
+ if(usb_pipeout(urb->pipe)) {
+ urb_priv->interval = MAX_INTR_INTERVAL;
+ }
+
+ /* Calculate amount of EPs needed */
+ ep_count = MAX_INTR_INTERVAL / urb_priv->interval;
+
+ for(i = 0; i < ep_count; i++) {
+ ep_desc = create_ep(urb_priv->epid, urb_priv->first_sb, mem_flags);
+ if(ep_desc == NULL) {
+ /* Free any descriptors that we may have allocated before failure */
+ while(i > 0) {
+ i--;
+ kfree(urb_priv->intr_ep_pool[i]);
+ }
+ return -ENOMEM;
+ }
+ urb_priv->intr_ep_pool[i] = ep_desc;
+ }
+ urb_priv->intr_ep_pool_length = ep_count;
+ return 0;
+}
+
+/* DMA RX/TX functions */
+/* ----------------------- */
+
+static void tc_dma_init_rx_list(void) {
+ int i;
+
+ /* Setup descriptor list except last one */
+ for (i = 0; i < (NBR_OF_RX_DESC - 1); i++) {
+ RxDescList[i].sw_len = RX_DESC_BUF_SIZE;
+ RxDescList[i].command = 0;
+ RxDescList[i].next = virt_to_phys(&RxDescList[i + 1]);
+ RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE));
+ RxDescList[i].hw_len = 0;
+ RxDescList[i].status = 0;
+
+ /* DMA IN cache bug. (struct etrax_dma_descr has the same layout as
+ USB_IN_Desc for the relevant fields.) */
+ prepare_rx_descriptor((struct etrax_dma_descr*)&RxDescList[i]);
+
+ }
+ /* Special handling of last descriptor */
+ RxDescList[i].sw_len = RX_DESC_BUF_SIZE;
+ RxDescList[i].command = IO_STATE(USB_IN_command, eol, yes);
+ RxDescList[i].next = virt_to_phys(&RxDescList[0]);
+ RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE));
+ RxDescList[i].hw_len = 0;
+ RxDescList[i].status = 0;
+
+ /* Setup list pointers that show progress in list */
+ myNextRxDesc = &RxDescList[0];
+ myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1];
+
+ flush_etrax_cache();
+ /* Point DMA to first descriptor in list and start it */
+ *R_DMA_CH9_FIRST = virt_to_phys(myNextRxDesc);
+ *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, start);
+}
+
+
+static void tc_dma_init_tx_bulk_list(void) {
+ int i;
+ volatile struct USB_EP_Desc *epDescr;
+
+ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
+ epDescr = &(TxBulkEPList[i]);
+ CHECK_ALIGN(epDescr);
+ epDescr->hw_len = 0;
+ epDescr->command = IO_FIELD(USB_EP_command, epid, i);
+ epDescr->sub = 0;
+ epDescr->next = virt_to_phys(&TxBulkEPList[i + 1]);
+
+ /* Initiate two EPs, disabled and with the eol flag set. No need for any
+ preserved epid. */
+
+ /* The first one has the intr flag set so we get an interrupt when the DMA
+ channel is about to become disabled. */
+ CHECK_ALIGN(&TxBulkDummyEPList[i][0]);
+ TxBulkDummyEPList[i][0].hw_len = 0;
+ TxBulkDummyEPList[i][0].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) |
+ IO_STATE(USB_EP_command, eol, yes) |
+ IO_STATE(USB_EP_command, intr, yes));
+ TxBulkDummyEPList[i][0].sub = 0;
+ TxBulkDummyEPList[i][0].next = virt_to_phys(&TxBulkDummyEPList[i][1]);
+
+ /* The second one. */
+ CHECK_ALIGN(&TxBulkDummyEPList[i][1]);
+ TxBulkDummyEPList[i][1].hw_len = 0;
+ TxBulkDummyEPList[i][1].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) |
+ IO_STATE(USB_EP_command, eol, yes));
+ TxBulkDummyEPList[i][1].sub = 0;
+ /* The last dummy's next pointer is the same as the current EP's next pointer. */
+ TxBulkDummyEPList[i][1].next = virt_to_phys(&TxBulkEPList[i + 1]);
+ }
+
+ /* Special handling of last descr in list, make list circular */
+ epDescr = &TxBulkEPList[i];
+ CHECK_ALIGN(epDescr);
+ epDescr->hw_len = 0;
+ epDescr->command = IO_STATE(USB_EP_command, eol, yes) |
+ IO_FIELD(USB_EP_command, epid, i);
+ epDescr->sub = 0;
+ epDescr->next = virt_to_phys(&TxBulkEPList[0]);
+
+ /* Init DMA sub-channel pointers to last item in each list */
+ *R_DMA_CH8_SUB0_EP = virt_to_phys(&TxBulkEPList[i]);
+ /* No point in starting the bulk channel yet.
+ *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */
+}
+
+static void tc_dma_init_tx_ctrl_list(void) {
+ int i;
+ volatile struct USB_EP_Desc *epDescr;
+
+ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
+ epDescr = &(TxCtrlEPList[i]);
+ CHECK_ALIGN(epDescr);
+ epDescr->hw_len = 0;
+ epDescr->command = IO_FIELD(USB_EP_command, epid, i);
+ epDescr->sub = 0;
+ epDescr->next = virt_to_phys(&TxCtrlEPList[i + 1]);
+ }
+ /* Special handling of last descr in list, make list circular */
+ epDescr = &TxCtrlEPList[i];
+ CHECK_ALIGN(epDescr);
+ epDescr->hw_len = 0;
+ epDescr->command = IO_STATE(USB_EP_command, eol, yes) |
+ IO_FIELD(USB_EP_command, epid, i);
+ epDescr->sub = 0;
+ epDescr->next = virt_to_phys(&TxCtrlEPList[0]);
+
+ /* Init DMA sub-channel pointers to last item in each list */
+ *R_DMA_CH8_SUB1_EP = virt_to_phys(&TxCtrlEPList[i]);
+ /* No point in starting the ctrl channel yet.
+ *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */
+}
+
+
+static void tc_dma_init_tx_intr_list(void) {
+ int i;
+
+ TxIntrSB_zout.sw_len = 1;
+ TxIntrSB_zout.next = 0;
+ TxIntrSB_zout.buf = virt_to_phys(&zout_buffer[0]);
+ TxIntrSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) |
+ IO_STATE(USB_SB_command, tt, zout) |
+ IO_STATE(USB_SB_command, full, yes) |
+ IO_STATE(USB_SB_command, eot, yes) |
+ IO_STATE(USB_SB_command, eol, yes));
+
+ for (i = 0; i < (MAX_INTR_INTERVAL - 1); i++) {
+ CHECK_ALIGN(&TxIntrEPList[i]);
+ TxIntrEPList[i].hw_len = 0;
+ TxIntrEPList[i].command =
+ (IO_STATE(USB_EP_command, eof, yes) |
+ IO_STATE(USB_EP_command, enable, yes) |
+ IO_FIELD(USB_EP_command, epid, INVALID_EPID));
+ TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout);
+ TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[i + 1]);
+ }
+
+ /* Special handling of last descr in list, make list circular */
+ CHECK_ALIGN(&TxIntrEPList[i]);
+ TxIntrEPList[i].hw_len = 0;
+ TxIntrEPList[i].command =
+ (IO_STATE(USB_EP_command, eof, yes) |
+ IO_STATE(USB_EP_command, eol, yes) |
+ IO_STATE(USB_EP_command, enable, yes) |
+ IO_FIELD(USB_EP_command, epid, INVALID_EPID));
+ TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout);
+ TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[0]);
+
+ intr_dbg("Initiated Intr EP descriptor list\n");
+
+
+ /* Connect DMA 8 sub-channel 2 to first in list */
+ *R_DMA_CH8_SUB2_EP = virt_to_phys(&TxIntrEPList[0]);
+}
+
+static void tc_dma_init_tx_isoc_list(void) {
+ int i;
+
+ DBFENTER;
+
+ /* Read comment at zout_buffer declaration for an explanation to this. */
+ TxIsocSB_zout.sw_len = 1;
+ TxIsocSB_zout.next = 0;
+ TxIsocSB_zout.buf = virt_to_phys(&zout_buffer[0]);
+ TxIsocSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) |
+ IO_STATE(USB_SB_command, tt, zout) |
+ IO_STATE(USB_SB_command, full, yes) |
+ IO_STATE(USB_SB_command, eot, yes) |
+ IO_STATE(USB_SB_command, eol, yes));
+
+ /* The last isochronous EP descriptor is a dummy. */
+ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
+ CHECK_ALIGN(&TxIsocEPList[i]);
+ TxIsocEPList[i].hw_len = 0;
+ TxIsocEPList[i].command = IO_FIELD(USB_EP_command, epid, i);
+ TxIsocEPList[i].sub = 0;
+ TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[i + 1]);
+ }
+
+ CHECK_ALIGN(&TxIsocEPList[i]);
+ TxIsocEPList[i].hw_len = 0;
+
+ /* Must enable the last EP descr to get eof interrupt. */
+ TxIsocEPList[i].command = (IO_STATE(USB_EP_command, enable, yes) |
+ IO_STATE(USB_EP_command, eof, yes) |
+ IO_STATE(USB_EP_command, eol, yes) |
+ IO_FIELD(USB_EP_command, epid, INVALID_EPID));
+ TxIsocEPList[i].sub = virt_to_phys(&TxIsocSB_zout);
+ TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[0]);
+
+ *R_DMA_CH8_SUB3_EP = virt_to_phys(&TxIsocEPList[0]);
+ *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start);
+}
+
+static int tc_dma_init(struct usb_hcd *hcd) {
+ tc_dma_init_rx_list();
+ tc_dma_init_tx_bulk_list();
+ tc_dma_init_tx_ctrl_list();
+ tc_dma_init_tx_intr_list();
+ tc_dma_init_tx_isoc_list();
+
+ if (cris_request_dma(USB_TX_DMA_NBR,
+ "ETRAX 100LX built-in USB (Tx)",
+ DMA_VERBOSE_ON_ERROR,
+ dma_usb)) {
+ err("Could not allocate DMA ch 8 for USB");
+ return -EBUSY;
+ }
+
+ if (cris_request_dma(USB_RX_DMA_NBR,
+ "ETRAX 100LX built-in USB (Rx)",
+ DMA_VERBOSE_ON_ERROR,
+ dma_usb)) {
+ err("Could not allocate DMA ch 9 for USB");
+ return -EBUSY;
+ }
+
+ *R_IRQ_MASK2_SET =
+ /* Note that these interrupts are not used. */
+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub0_descr, set) |
+ /* Sub channel 1 (ctrl) descr. interrupts are used. */
+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub1_descr, set) |
+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub2_descr, set) |
+ /* Sub channel 3 (isoc) descr. interrupts are used. */
+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub3_descr, set);
+
+ /* Note that the dma9_descr interrupt is not used. */
+ *R_IRQ_MASK2_SET =
+ IO_STATE(R_IRQ_MASK2_SET, dma9_eop, set) |
+ IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set);
+
+ if (request_irq(ETRAX_USB_RX_IRQ, tc_dma_rx_interrupt, 0,
+ "ETRAX 100LX built-in USB (Rx)", hcd)) {
+ err("Could not allocate IRQ %d for USB", ETRAX_USB_RX_IRQ);
+ return -EBUSY;
+ }
+
+ if (request_irq(ETRAX_USB_TX_IRQ, tc_dma_tx_interrupt, 0,
+ "ETRAX 100LX built-in USB (Tx)", hcd)) {
+ err("Could not allocate IRQ %d for USB", ETRAX_USB_TX_IRQ);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static void tc_dma_destroy(void) {
+ free_irq(ETRAX_USB_RX_IRQ, NULL);
+ free_irq(ETRAX_USB_TX_IRQ, NULL);
+
+ cris_free_dma(USB_TX_DMA_NBR, "ETRAX 100LX built-in USB (Tx)");
+ cris_free_dma(USB_RX_DMA_NBR, "ETRAX 100LX built-in USB (Rx)");
+
+}
+
+static void tc_dma_link_intr_urb(struct urb *urb);
+
+/* Handle processing of Bulk, Ctrl and Intr queues */
+static void tc_dma_process_queue(int epid) {
+ struct urb *urb;
+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
+ unsigned long flags;
+ char toggle;
+
+ if(epid_state[epid].disabled) {
+ /* Don't process any URBs on a disabled endpoint */
+ return;
+ }
+
+ /* Do not disturb us while fiddling with EPs and epids */
+ local_irq_save(flags);
+
+ /* For bulk, Ctrl and Intr can we only have one URB active at a time for
+ a specific EP. */
+ if(activeUrbList[epid] != NULL) {
+ /* An URB is already active on EP, skip checking queue */
+ local_irq_restore(flags);
+ return;
+ }
+
+ urb = urb_list_first(epid);
+ if(urb == NULL) {
+ /* No URB waiting in EP queue. Nothing do to */
+ local_irq_restore(flags);
+ return;
+ }
+
+ urb_priv = urb->hcpriv;
+ ASSERT(urb_priv != NULL);
+ ASSERT(urb_priv->urb_state == NOT_STARTED);
+ ASSERT(!usb_pipeisoc(urb->pipe));
+
+ /* Remove this URB from the queue and move it to active */
+ activeUrbList[epid] = urb;
+ urb_list_del(urb, epid);
+
+ urb_priv->urb_state = STARTED;
+
+ /* Reset error counters (regardless of which direction this traffic is). */
+ etrax_epid_clear_error(epid);
+
+ /* Special handling of Intr EP lists */
+ if(usb_pipeint(urb->pipe)) {
+ tc_dma_link_intr_urb(urb);
+ local_irq_restore(flags);
+ return;
+ }
+
+ /* Software must preset the toggle bits for Bulk and Ctrl */
+ if(usb_pipecontrol(urb->pipe)) {
+ /* Toggle bits are initialized only during setup transaction in a
+ CTRL transfer */
+ etrax_epid_set_toggle(epid, 0, 0);
+ etrax_epid_set_toggle(epid, 1, 0);
+ } else {
+ toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+ usb_pipeout(urb->pipe));
+ etrax_epid_set_toggle(epid, usb_pipeout(urb->pipe), toggle);
+ }
+
+ tc_dbg("Added SBs from (URB:0x%x %s %s) to epid %d: %s\n",
+ (unsigned int)urb, str_dir(urb->pipe), str_type(urb->pipe), epid,
+ sblist_to_str(urb_priv->first_sb));
+
+ /* We start the DMA sub channel without checking if it's running or not,
+ because:
+ 1) If it's already running, issuing the start command is a nop.
+ 2) We avoid a test-and-set race condition. */
+ switch(usb_pipetype(urb->pipe)) {
+ case PIPE_BULK:
+ /* Assert that the EP descriptor is disabled. */
+ ASSERT(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)));
+
+ /* Set up and enable the EP descriptor. */
+ TxBulkEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
+ TxBulkEPList[epid].hw_len = 0;
+ TxBulkEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
+
+ /* Check if the dummy list is already with us (if several urbs were queued). */
+ if (usb_pipein(urb->pipe) && (TxBulkEPList[epid].next != virt_to_phys(&TxBulkDummyEPList[epid][0]))) {
+ tc_dbg("Inviting dummy list to the party for urb 0x%lx, epid %d",
+ (unsigned long)urb, epid);
+
+ /* We don't need to check if the DMA is at this EP or not before changing the
+ next pointer, since we will do it in one 32-bit write (EP descriptors are
+ 32-bit aligned). */
+ TxBulkEPList[epid].next = virt_to_phys(&TxBulkDummyEPList[epid][0]);
+ }
+
+ restart_dma8_sub0();
+
+ /* Update/restart the bulk start timer since we just started the channel.*/
+ mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL);
+ /* Update/restart the bulk eot timer since we just inserted traffic. */
+ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
+ break;
+ case PIPE_CONTROL:
+ /* Assert that the EP descriptor is disabled. */
+ ASSERT(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)));
+
+ /* Set up and enable the EP descriptor. */
+ TxCtrlEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
+ TxCtrlEPList[epid].hw_len = 0;
+ TxCtrlEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
+
+ *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start);
+ break;
+ }
+ local_irq_restore(flags);
+}
+
+static void tc_dma_link_intr_urb(struct urb *urb) {
+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
+ volatile struct USB_EP_Desc *tmp_ep;
+ struct USB_EP_Desc *ep_desc;
+ int i = 0, epid;
+ int pool_idx = 0;
+
+ ASSERT(urb_priv != NULL);
+ epid = urb_priv->epid;
+ ASSERT(urb_priv->interval > 0);
+ ASSERT(urb_priv->intr_ep_pool_length > 0);
+
+ tmp_ep = &TxIntrEPList[0];
+
+ /* Only insert one EP descriptor in list for Out Intr URBs.
+ We can only handle Out Intr with interval of 128ms because
+ it's not possible to insert several Out Intr EPs because they
+ are not consumed by the DMA. */
+ if(usb_pipeout(urb->pipe)) {
+ ep_desc = urb_priv->intr_ep_pool[0];
+ ASSERT(ep_desc);
+ ep_desc->next = tmp_ep->next;
+ tmp_ep->next = virt_to_phys(ep_desc);
+ i++;
+ } else {
+ /* Loop through Intr EP descriptor list and insert EP for URB at
+ specified interval */
+ do {
+ /* Each EP descriptor with eof flag sat signals a new frame */
+ if (tmp_ep->command & IO_MASK(USB_EP_command, eof)) {
+ /* Insert a EP from URBs EP pool at correct interval */
+ if ((i % urb_priv->interval) == 0) {
+ ep_desc = urb_priv->intr_ep_pool[pool_idx];
+ ASSERT(ep_desc);
+ ep_desc->next = tmp_ep->next;
+ tmp_ep->next = virt_to_phys(ep_desc);
+ pool_idx++;
+ ASSERT(pool_idx <= urb_priv->intr_ep_pool_length);
+ }
+ i++;
+ }
+ tmp_ep = (struct USB_EP_Desc *)phys_to_virt(tmp_ep->next);
+ } while(tmp_ep != &TxIntrEPList[0]);
+ }
+
+ intr_dbg("Added SBs to intr epid %d: %s interval:%d (%d EP)\n", epid,
+ sblist_to_str(urb_priv->first_sb), urb_priv->interval, pool_idx);
+
+ /* We start the DMA sub channel without checking if it's running or not,
+ because:
+ 1) If it's already running, issuing the start command is a nop.
+ 2) We avoid a test-and-set race condition. */
+ *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start);
+}
+
+static void tc_dma_process_isoc_urb(struct urb *urb) {
+ unsigned long flags;
+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
+ int epid;
+
+ /* Do not disturb us while fiddling with EPs and epids */
+ local_irq_save(flags);
+
+ ASSERT(urb_priv);
+ ASSERT(urb_priv->first_sb);
+ epid = urb_priv->epid;
+
+ if(activeUrbList[epid] == NULL) {
+ /* EP is idle, so make this URB active */
+ activeUrbList[epid] = urb;
+ urb_list_del(urb, epid);
+ ASSERT(TxIsocEPList[epid].sub == 0);
+ ASSERT(!(TxIsocEPList[epid].command &
+ IO_STATE(USB_EP_command, enable, yes)));
+
+ /* Differentiate between In and Out Isoc. Because In SBs are not consumed*/
+ if(usb_pipein(urb->pipe)) {
+ /* Each EP for In Isoc will have only one SB descriptor, setup when
+ submitting the first active urb. We do it here by copying from URBs
+ pre-allocated SB. */
+ memcpy((void *)&(TxIsocSBList[epid]), urb_priv->first_sb,
+ sizeof(TxIsocSBList[epid]));
+ TxIsocEPList[epid].hw_len = 0;
+ TxIsocEPList[epid].sub = virt_to_phys(&(TxIsocSBList[epid]));
+ } else {
+ /* For Out Isoc we attach the pre-allocated list of SBs for the URB */
+ TxIsocEPList[epid].hw_len = 0;
+ TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
+
+ isoc_dbg("Attached first URB:0x%x[%d] to epid:%d first_sb:0x%x"
+ " last_sb::0x%x\n",
+ (unsigned int)urb, urb_priv->urb_num, epid,
+ (unsigned int)(urb_priv->first_sb),
+ (unsigned int)(urb_priv->last_sb));
+ }
+
+ if (urb->transfer_flags & URB_ISO_ASAP) {
+ /* The isoc transfer should be started as soon as possible. The
+ start_frame field is a return value if URB_ISO_ASAP was set. Comparing
+ R_USB_FM_NUMBER with a USB Chief trace shows that the first isoc IN
+ token is sent 2 frames later. I'm not sure how this affects usage of
+ the start_frame field by the device driver, or how it affects things
+ when USB_ISO_ASAP is not set, so therefore there's no compensation for
+ the 2 frame "lag" here. */
+ urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff);
+ TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
+ urb_priv->urb_state = STARTED;
+ isoc_dbg("URB_ISO_ASAP set, urb->start_frame set to %d\n",
+ urb->start_frame);
+ } else {
+ /* Not started yet. */
+ urb_priv->urb_state = NOT_STARTED;
+ isoc_warn("urb_priv->urb_state set to NOT_STARTED for URB:0x%x\n",
+ (unsigned int)urb);
+ }
+
+ } else {
+ /* An URB is already active on the EP. Leave URB in queue and let
+ finish_isoc_urb process it after current active URB */
+ ASSERT(TxIsocEPList[epid].sub != 0);
+
+ if(usb_pipein(urb->pipe)) {
+ /* Because there already is a active In URB on this epid we do nothing
+ and the finish_isoc_urb() function will handle switching to next URB*/
+
+ } else { /* For Out Isoc, insert new URBs traffic last in SB-list. */
+ struct USB_SB_Desc *temp_sb_desc;
+
+ /* Set state STARTED to all Out Isoc URBs added to SB list because we
+ don't know how many of them that are finished before descr interrupt*/
+ urb_priv->urb_state = STARTED;
+
+ /* Find end of current SB list by looking for SB with eol flag sat */
+ temp_sb_desc = phys_to_virt(TxIsocEPList[epid].sub);
+ while ((temp_sb_desc->command & IO_MASK(USB_SB_command, eol)) !=
+ IO_STATE(USB_SB_command, eol, yes)) {
+ ASSERT(temp_sb_desc->next);
+ temp_sb_desc = phys_to_virt(temp_sb_desc->next);
+ }
+
+ isoc_dbg("Appended URB:0x%x[%d] (first:0x%x last:0x%x) to epid:%d"
+ " sub:0x%x eol:0x%x\n",
+ (unsigned int)urb, urb_priv->urb_num,
+ (unsigned int)(urb_priv->first_sb),
+ (unsigned int)(urb_priv->last_sb), epid,
+ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub),
+ (unsigned int)temp_sb_desc);
+
+ /* Next pointer must be set before eol is removed. */
+ temp_sb_desc->next = virt_to_phys(urb_priv->first_sb);
+ /* Clear the previous end of list flag since there is a new in the
+ added SB descriptor list. */
+ temp_sb_desc->command &= ~IO_MASK(USB_SB_command, eol);
+
+ if (!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) {
+ __u32 epid_data;
+ /* 8.8.5 in Designer's Reference says we should check for and correct
+ any errors in the EP here. That should not be necessary if
+ epid_attn is handled correctly, so we assume all is ok. */
+ epid_data = etrax_epid_iso_get(epid);
+ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) !=
+ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
+ isoc_err("Disabled Isoc EP with error:%d on epid:%d when appending"
+ " URB:0x%x[%d]\n",
+ IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data), epid,
+ (unsigned int)urb, urb_priv->urb_num);
+ }
+
+ /* The SB list was exhausted. */
+ if (virt_to_phys(urb_priv->last_sb) != TxIsocEPList[epid].sub) {
+ /* The new sublist did not get processed before the EP was
+ disabled. Setup the EP again. */
+
+ if(virt_to_phys(temp_sb_desc) == TxIsocEPList[epid].sub) {
+ isoc_dbg("EP for epid:%d stoped at SB:0x%x before newly inserted"
+ ", restarting from this URBs SB:0x%x\n",
+ epid, (unsigned int)temp_sb_desc,
+ (unsigned int)(urb_priv->first_sb));
+ TxIsocEPList[epid].hw_len = 0;
+ TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
+ urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff);
+ /* Enable the EP again so data gets processed this time */
+ TxIsocEPList[epid].command |=
+ IO_STATE(USB_EP_command, enable, yes);
+
+ } else {
+ /* The EP has been disabled but not at end this URB (god knows
+ where). This should generate an epid_attn so we should not be
+ here */
+ isoc_warn("EP was disabled on sb:0x%x before SB list for"
+ " URB:0x%x[%d] got processed\n",
+ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub),
+ (unsigned int)urb, urb_priv->urb_num);
+ }
+ } else {
+ /* This might happend if we are slow on this function and isn't
+ an error. */
+ isoc_dbg("EP was disabled and finished with SBs from appended"
+ " URB:0x%x[%d]\n", (unsigned int)urb, urb_priv->urb_num);
+ }
+ }
+ }
+ }
+
+ /* Start the DMA sub channel */
+ *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start);
+
+ local_irq_restore(flags);
+}
+
+static void tc_dma_unlink_intr_urb(struct urb *urb) {
+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
+ volatile struct USB_EP_Desc *first_ep; /* First EP in the list. */
+ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */
+ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */
+ volatile struct USB_EP_Desc *unlink_ep; /* The one we should remove from
+ the list. */
+ int count = 0;
+ volatile int timeout = 10000;
+ int epid;
+
+ /* Read 8.8.4 in Designer's Reference, "Removing an EP Descriptor from the
+ List". */
+ ASSERT(urb_priv);
+ ASSERT(urb_priv->intr_ep_pool_length > 0);
+ epid = urb_priv->epid;
+
+ /* First disable all Intr EPs belonging to epid for this URB */
+ first_ep = &TxIntrEPList[0];
+ curr_ep = first_ep;
+ do {
+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next);
+ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) {
+ /* Disable EP */
+ next_ep->command &= ~IO_MASK(USB_EP_command, enable);
+ }
+ curr_ep = phys_to_virt(curr_ep->next);
+ } while (curr_ep != first_ep);
+
+
+ /* Now unlink all EPs belonging to this epid from Descr list */
+ first_ep = &TxIntrEPList[0];
+ curr_ep = first_ep;
+ do {
+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next);
+ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) {
+ /* This is the one we should unlink. */
+ unlink_ep = next_ep;
+
+ /* Actually unlink the EP from the DMA list. */
+ curr_ep->next = unlink_ep->next;
+
+ /* Wait until the DMA is no longer at this descriptor. */
+ while((*R_DMA_CH8_SUB2_EP == virt_to_phys(unlink_ep)) &&
+ (timeout-- > 0));
+ if(timeout == 0) {
+ warn("Timeout while waiting for DMA-TX-Intr to leave unlink EP\n");
+ }
+
+ count++;
+ }
+ curr_ep = phys_to_virt(curr_ep->next);
+ } while (curr_ep != first_ep);
+
+ if(count != urb_priv->intr_ep_pool_length) {
+ intr_warn("Unlinked %d of %d Intr EPs for URB:0x%x[%d]\n", count,
+ urb_priv->intr_ep_pool_length, (unsigned int)urb,
+ urb_priv->urb_num);
+ } else {
+ intr_dbg("Unlinked %d of %d interrupt EPs for URB:0x%x\n", count,
+ urb_priv->intr_ep_pool_length, (unsigned int)urb);
+ }
+}
+
+static void check_finished_bulk_tx_epids(struct usb_hcd *hcd,
+ int timer) {
+ unsigned long flags;
+ int epid;
+ struct urb *urb;
+ struct crisv10_urb_priv * urb_priv;
+ __u32 epid_data;
+
+ /* Protect TxEPList */
+ local_irq_save(flags);
+
+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
+ /* A finished EP descriptor is disabled and has a valid sub pointer */
+ if (!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) &&
+ (TxBulkEPList[epid].sub != 0)) {
+
+ /* Get the active URB for this epid */
+ urb = activeUrbList[epid];
+ /* Sanity checks */
+ ASSERT(urb);
+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
+ ASSERT(urb_priv);
+
+ /* Only handle finished out Bulk EPs here,
+ and let RX interrupt take care of the rest */
+ if(!epid_out_traffic(epid)) {
+ continue;
+ }
+
+ if(timer) {
+ tc_warn("Found finished %s Bulk epid:%d URB:0x%x[%d] from timeout\n",
+ epid_out_traffic(epid) ? "Out" : "In", epid, (unsigned int)urb,
+ urb_priv->urb_num);
+ } else {
+ tc_dbg("Found finished %s Bulk epid:%d URB:0x%x[%d] from interrupt\n",
+ epid_out_traffic(epid) ? "Out" : "In", epid, (unsigned int)urb,
+ urb_priv->urb_num);
+ }
+
+ if(urb_priv->urb_state == UNLINK) {
+ /* This Bulk URB is requested to be unlinked, that means that the EP
+ has been disabled and we might not have sent all data */
+ tc_finish_urb(hcd, urb, urb->status);
+ continue;
+ }
+
+ ASSERT(urb_priv->urb_state == STARTED);
+ if (phys_to_virt(TxBulkEPList[epid].sub) != urb_priv->last_sb) {
+ tc_err("Endpoint got disabled before reaching last sb\n");
+ }
+
+ epid_data = etrax_epid_get(epid);
+ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) ==
+ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
+ /* This means that the endpoint has no error, is disabled
+ and had inserted traffic, i.e. transfer successfully completed. */
+ tc_finish_urb(hcd, urb, 0);
+ } else {
+ /* Shouldn't happen. We expect errors to be caught by epid
+ attention. */
+ tc_err("Found disabled bulk EP desc (epid:%d error:%d)\n",
+ epid, IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data));
+ }
+ } else {
+ tc_dbg("Ignoring In Bulk epid:%d, let RX interrupt handle it\n", epid);
+ }
+ }
+
+ local_irq_restore(flags);
+}
+
+static void check_finished_ctrl_tx_epids(struct usb_hcd *hcd) {
+ unsigned long flags;
+ int epid;
+ struct urb *urb;
+ struct crisv10_urb_priv * urb_priv;
+ __u32 epid_data;
+
+ /* Protect TxEPList */
+ local_irq_save(flags);
+
+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
+ if(epid == DUMMY_EPID)
+ continue;
+
+ /* A finished EP descriptor is disabled and has a valid sub pointer */
+ if (!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) &&
+ (TxCtrlEPList[epid].sub != 0)) {
+
+ /* Get the active URB for this epid */
+ urb = activeUrbList[epid];
+
+ if(urb == NULL) {
+ tc_warn("Found finished Ctrl epid:%d with no active URB\n", epid);
+ continue;
+ }
+
+ /* Sanity checks */
+ ASSERT(usb_pipein(urb->pipe));
+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
+ ASSERT(urb_priv);
+ if (phys_to_virt(TxCtrlEPList[epid].sub) != urb_priv->last_sb) {
+ tc_err("Endpoint got disabled before reaching last sb\n");
+ }
+
+ epid_data = etrax_epid_get(epid);
+ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) ==
+ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
+ /* This means that the endpoint has no error, is disabled
+ and had inserted traffic, i.e. transfer successfully completed. */
+
+ /* Check if RX-interrupt for In Ctrl has been processed before
+ finishing the URB */
+ if(urb_priv->ctrl_rx_done) {
+ tc_dbg("Finishing In Ctrl URB:0x%x[%d] in tx_interrupt\n",
+ (unsigned int)urb, urb_priv->urb_num);
+ tc_finish_urb(hcd, urb, 0);
+ } else {
+ /* If we get zout descriptor interrupt before RX was done for a
+ In Ctrl transfer, then we flag that and it will be finished
+ in the RX-Interrupt */
+ urb_priv->ctrl_zout_done = 1;
+ tc_dbg("Got zout descr interrupt before RX interrupt\n");
+ }
+ } else {
+ /* Shouldn't happen. We expect errors to be caught by epid
+ attention. */
+ tc_err("Found disabled Ctrl EP desc (epid:%d URB:0x%x[%d]) error_code:%d\n", epid, (unsigned int)urb, urb_priv->urb_num, IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data));
+ __dump_ep_desc(&(TxCtrlEPList[epid]));
+ __dump_ept_data(epid);
+ }
+ }
+ }
+ local_irq_restore(flags);
+}
+
+/* This function goes through all epids that are setup for Out Isoc transfers
+ and marks (isoc_out_done) all queued URBs that the DMA has finished
+ transfer for.
+ No URB completetion is done here to make interrupt routine return quickly.
+ URBs are completed later with help of complete_isoc_bottom_half() that
+ becomes schedules when this functions is finished. */
+static void check_finished_isoc_tx_epids(void) {
+ unsigned long flags;
+ int epid;
+ struct urb *urb;
+ struct crisv10_urb_priv * urb_priv;
+ struct USB_SB_Desc* sb_desc;
+ int epid_done;
+
+ /* Protect TxIsocEPList */
+ local_irq_save(flags);
+
+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
+ if (TxIsocEPList[epid].sub == 0 || epid == INVALID_EPID ||
+ !epid_out_traffic(epid)) {
+ /* Nothing here to see. */
+ continue;
+ }
+ ASSERT(epid_inuse(epid));
+ ASSERT(epid_isoc(epid));
+
+ sb_desc = phys_to_virt(TxIsocEPList[epid].sub);
+ /* Find the last descriptor of the currently active URB for this ep.
+ This is the first descriptor in the sub list marked for a descriptor
+ interrupt. */
+ while (sb_desc && !IO_EXTRACT(USB_SB_command, intr, sb_desc->command)) {
+ sb_desc = sb_desc->next ? phys_to_virt(sb_desc->next) : 0;
+ }
+ ASSERT(sb_desc);
+
+ isoc_dbg("Descr IRQ checking epid:%d sub:0x%x intr:0x%x\n",
+ epid, (unsigned int)phys_to_virt(TxIsocEPList[epid].sub),
+ (unsigned int)sb_desc);
+
+ urb = activeUrbList[epid];
+ if(urb == NULL) {
+ isoc_err("Isoc Descr irq on epid:%d with no active URB\n", epid);
+ continue;
+ }
+
+ epid_done = 0;
+ while(urb && !epid_done) {
+ /* Sanity check. */
+ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
+ ASSERT(usb_pipeout(urb->pipe));
+
+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
+ ASSERT(urb_priv);
+ ASSERT(urb_priv->urb_state == STARTED ||
+ urb_priv->urb_state == UNLINK);
+
+ if (sb_desc != urb_priv->last_sb) {
+ /* This urb has been sent. */
+ urb_priv->isoc_out_done = 1;
+
+ } else { /* Found URB that has last_sb as the interrupt reason */
+
+ /* Check if EP has been disabled, meaning that all transfers are done*/
+ if(!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) {
+ ASSERT((sb_desc->command & IO_MASK(USB_SB_command, eol)) ==
+ IO_STATE(USB_SB_command, eol, yes));
+ ASSERT(sb_desc->next == 0);
+ urb_priv->isoc_out_done = 1;
+ } else {
+ isoc_dbg("Skipping URB:0x%x[%d] because EP not disabled yet\n",
+ (unsigned int)urb, urb_priv->urb_num);
+ }
+ /* Stop looking any further in queue */
+ epid_done = 1;
+ }
+
+ if (!epid_done) {
+ if(urb == activeUrbList[epid]) {
+ urb = urb_list_first(epid);
+ } else {
+ urb = urb_list_next(urb, epid);
+ }
+ }
+ } /* END: while(urb && !epid_done) */
+ }
+
+ local_irq_restore(flags);
+}
+
+
+/* This is where the Out Isoc URBs are realy completed. This function is
+ scheduled from tc_dma_tx_interrupt() when one or more Out Isoc transfers
+ are done. This functions completes all URBs earlier marked with
+ isoc_out_done by fast interrupt routine check_finished_isoc_tx_epids() */
+
+static void complete_isoc_bottom_half(void *data) {
+ struct crisv10_isoc_complete_data *comp_data;
+ struct usb_iso_packet_descriptor *packet;
+ struct crisv10_urb_priv * urb_priv;
+ unsigned long flags;
+ struct urb* urb;
+ int epid_done;
+ int epid;
+ int i;
+
+ comp_data = (struct crisv10_isoc_complete_data*)data;
+
+ local_irq_save(flags);
+
+ for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
+ if(!epid_inuse(epid) || !epid_isoc(epid) || !epid_out_traffic(epid) || epid == DUMMY_EPID) {
+ /* Only check valid Out Isoc epids */
+ continue;
+ }
+
+ isoc_dbg("Isoc bottom-half checking epid:%d, sub:0x%x\n", epid,
+ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub));
+
+ /* The descriptor interrupt handler has marked all transmitted Out Isoc
+ URBs with isoc_out_done. Now we traverse all epids and for all that
+ have out Isoc traffic we traverse its URB list and complete the
+ transmitted URBs. */
+ epid_done = 0;
+ while (!epid_done) {
+
+ /* Get the active urb (if any) */
+ urb = activeUrbList[epid];
+ if (urb == 0) {
+ isoc_dbg("No active URB on epid:%d anymore\n", epid);
+ epid_done = 1;
+ continue;
+ }
+
+ /* Sanity check. */
+ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
+ ASSERT(usb_pipeout(urb->pipe));
+
+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
+ ASSERT(urb_priv);
+
+ if (!(urb_priv->isoc_out_done)) {
+ /* We have reached URB that isn't flaged done yet, stop traversing. */
+ isoc_dbg("Stoped traversing Out Isoc URBs on epid:%d"
+ " before not yet flaged URB:0x%x[%d]\n",
+ epid, (unsigned int)urb, urb_priv->urb_num);
+ epid_done = 1;
+ continue;
+ }
+
+ /* This urb has been sent. */
+ isoc_dbg("Found URB:0x%x[%d] that is flaged isoc_out_done\n",
+ (unsigned int)urb, urb_priv->urb_num);
+
+ /* Set ok on transfered packets for this URB and finish it */
+ for (i = 0; i < urb->number_of_packets; i++) {
+ packet = &urb->iso_frame_desc[i];
+ packet->status = 0;
+ packet->actual_length = packet->length;
+ }
+ urb_priv->isoc_packet_counter = urb->number_of_packets;
+ tc_finish_urb(comp_data->hcd, urb, 0);
+
+ } /* END: while(!epid_done) */
+ } /* END: for(epid...) */
+
+ local_irq_restore(flags);
+ kmem_cache_free(isoc_compl_cache, comp_data);
+}
+
+
+static void check_finished_intr_tx_epids(struct usb_hcd *hcd) {
+ unsigned long flags;
+ int epid;
+ struct urb *urb;
+ struct crisv10_urb_priv * urb_priv;
+ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */
+ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */
+
+ /* Protect TxintrEPList */
+ local_irq_save(flags);
+
+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
+ if(!epid_inuse(epid) || !epid_intr(epid) || !epid_out_traffic(epid)) {
+ /* Nothing to see on this epid. Only check valid Out Intr epids */
+ continue;
+ }
+
+ urb = activeUrbList[epid];
+ if(urb == 0) {
+ intr_warn("Found Out Intr epid:%d with no active URB\n", epid);
+ continue;
+ }
+
+ /* Sanity check. */
+ ASSERT(usb_pipetype(urb->pipe) == PIPE_INTERRUPT);
+ ASSERT(usb_pipeout(urb->pipe));
+
+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
+ ASSERT(urb_priv);
+
+ /* Go through EPs between first and second sof-EP. It's here Out Intr EPs
+ are inserted.*/
+ curr_ep = &TxIntrEPList[0];
+ do {
+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next);
+ if(next_ep == urb_priv->intr_ep_pool[0]) {
+ /* We found the Out Intr EP for this epid */
+
+ /* Disable it so it doesn't get processed again */
+ next_ep->command &= ~IO_MASK(USB_EP_command, enable);
+
+ /* Finish the active Out Intr URB with status OK */
+ tc_finish_urb(hcd, urb, 0);
+ }
+ curr_ep = phys_to_virt(curr_ep->next);
+ } while (curr_ep != &TxIntrEPList[1]);
+
+ }
+ local_irq_restore(flags);
+}
+
+/* Interrupt handler for DMA8/IRQ24 with subchannels (called from hardware intr) */
+static irqreturn_t tc_dma_tx_interrupt(int irq, void *vhc) {
+ struct usb_hcd *hcd = (struct usb_hcd*)vhc;
+ ASSERT(hcd);
+
+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub0_descr)) {
+ /* Clear this interrupt */
+ *R_DMA_CH8_SUB0_CLR_INTR = IO_STATE(R_DMA_CH8_SUB0_CLR_INTR, clr_descr, do);
+ restart_dma8_sub0();
+ }
+
+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub1_descr)) {
+ /* Clear this interrupt */
+ *R_DMA_CH8_SUB1_CLR_INTR = IO_STATE(R_DMA_CH8_SUB1_CLR_INTR, clr_descr, do);
+ check_finished_ctrl_tx_epids(hcd);
+ }
+
+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub2_descr)) {
+ /* Clear this interrupt */
+ *R_DMA_CH8_SUB2_CLR_INTR = IO_STATE(R_DMA_CH8_SUB2_CLR_INTR, clr_descr, do);
+ check_finished_intr_tx_epids(hcd);
+ }
+
+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub3_descr)) {
+ struct crisv10_isoc_complete_data* comp_data;
+
+ /* Flag done Out Isoc for later completion */
+ check_finished_isoc_tx_epids();
+
+ /* Clear this interrupt */
+ *R_DMA_CH8_SUB3_CLR_INTR = IO_STATE(R_DMA_CH8_SUB3_CLR_INTR, clr_descr, do);
+ /* Schedule bottom half of Out Isoc completion function. This function
+ finishes the URBs marked with isoc_out_done */
+ comp_data = (struct crisv10_isoc_complete_data*)
+ kmem_cache_alloc(isoc_compl_cache, SLAB_ATOMIC);
+ ASSERT(comp_data != NULL);
+ comp_data ->hcd = hcd;
+
+ INIT_WORK(&comp_data->usb_bh, complete_isoc_bottom_half, comp_data);
+ schedule_work(&comp_data->usb_bh);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/* Interrupt handler for DMA9/IRQ25 (called from hardware intr) */
+static irqreturn_t tc_dma_rx_interrupt(int irq, void *vhc) {
+ unsigned long flags;
+ struct urb *urb;
+ struct usb_hcd *hcd = (struct usb_hcd*)vhc;
+ struct crisv10_urb_priv *urb_priv;
+ int epid = 0;
+ int real_error;
+
+ ASSERT(hcd);
+
+ /* Clear this interrupt. */
+ *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do);
+
+ /* Custom clear interrupt for this interrupt */
+ /* The reason we cli here is that we call the driver's callback functions. */
+ local_irq_save(flags);
+
+ /* Note that this while loop assumes that all packets span only
+ one rx descriptor. */
+ while(myNextRxDesc->status & IO_MASK(USB_IN_status, eop)) {
+ epid = IO_EXTRACT(USB_IN_status, epid, myNextRxDesc->status);
+ /* Get the active URB for this epid */
+ urb = activeUrbList[epid];
+
+ ASSERT(epid_inuse(epid));
+ if (!urb) {
+ dma_err("No urb for epid %d in rx interrupt\n", epid);
+ goto skip_out;
+ }
+
+ /* Check if any errors on epid */
+ real_error = 0;
+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, error)) {
+ __u32 r_usb_ept_data;
+
+ if (usb_pipeisoc(urb->pipe)) {
+ r_usb_ept_data = etrax_epid_iso_get(epid);
+ if((r_usb_ept_data & IO_MASK(R_USB_EPT_DATA_ISO, valid)) &&
+ (IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data) == 0) &&
+ (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata))) {
+ /* Not an error, just a failure to receive an expected iso
+ in packet in this frame. This is not documented
+ in the designers reference. Continue processing.
+ */
+ } else real_error = 1;
+ } else real_error = 1;
+ }
+
+ if(real_error) {
+ dma_err("Error in RX descr on epid:%d for URB 0x%x",
+ epid, (unsigned int)urb);
+ dump_ept_data(epid);
+ dump_in_desc(myNextRxDesc);
+ goto skip_out;
+ }
+
+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
+ ASSERT(urb_priv);
+ ASSERT(urb_priv->urb_state == STARTED ||
+ urb_priv->urb_state == UNLINK);
+
+ if ((usb_pipetype(urb->pipe) == PIPE_BULK) ||
+ (usb_pipetype(urb->pipe) == PIPE_CONTROL) ||
+ (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) {
+
+ /* We get nodata for empty data transactions, and the rx descriptor's
+ hw_len field is not valid in that case. No data to copy in other
+ words. */
+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) {
+ /* No data to copy */
+ } else {
+ /*
+ dma_dbg("Processing RX for URB:0x%x epid:%d (data:%d ofs:%d)\n",
+ (unsigned int)urb, epid, myNextRxDesc->hw_len,
+ urb_priv->rx_offset);
+ */
+ /* Only copy data if URB isn't flaged to be unlinked*/
+ if(urb_priv->urb_state != UNLINK) {
+ /* Make sure the data fits in the buffer. */
+ if(urb_priv->rx_offset + myNextRxDesc->hw_len
+ <= urb->transfer_buffer_length) {
+
+ /* Copy the data to URBs buffer */
+ memcpy(urb->transfer_buffer + urb_priv->rx_offset,
+ phys_to_virt(myNextRxDesc->buf), myNextRxDesc->hw_len);
+ urb_priv->rx_offset += myNextRxDesc->hw_len;
+ } else {
+ /* Signal overflow when returning URB */
+ urb->status = -EOVERFLOW;
+ tc_finish_urb_later(hcd, urb, urb->status);
+ }
+ }
+ }
+
+ /* Check if it was the last packet in the transfer */
+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, eot)) {
+ /* Special handling for In Ctrl URBs. */
+ if(usb_pipecontrol(urb->pipe) && usb_pipein(urb->pipe) &&
+ !(urb_priv->ctrl_zout_done)) {
+ /* Flag that RX part of Ctrl transfer is done. Because zout descr
+ interrupt hasn't happend yet will the URB be finished in the
+ TX-Interrupt. */
+ urb_priv->ctrl_rx_done = 1;
+ tc_dbg("Not finishing In Ctrl URB:0x%x from rx_interrupt, waiting"
+ " for zout\n", (unsigned int)urb);
+ } else {
+ tc_finish_urb(hcd, urb, 0);
+ }
+ }
+ } else { /* ISOC RX */
+ /*
+ isoc_dbg("Processing RX for epid:%d (URB:0x%x) ISOC pipe\n",
+ epid, (unsigned int)urb);
+ */
+
+ struct usb_iso_packet_descriptor *packet;
+
+ if (urb_priv->urb_state == UNLINK) {
+ isoc_warn("Ignoring Isoc Rx data for urb being unlinked.\n");
+ goto skip_out;
+ } else if (urb_priv->urb_state == NOT_STARTED) {
+ isoc_err("What? Got Rx data for Isoc urb that isn't started?\n");
+ goto skip_out;
+ }
+
+ packet = &urb->iso_frame_desc[urb_priv->isoc_packet_counter];
+ ASSERT(packet);
+ packet->status = 0;
+
+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) {
+ /* We get nodata for empty data transactions, and the rx descriptor's
+ hw_len field is not valid in that case. We copy 0 bytes however to
+ stay in synch. */
+ packet->actual_length = 0;
+ } else {
+ packet->actual_length = myNextRxDesc->hw_len;
+ /* Make sure the data fits in the buffer. */
+ ASSERT(packet->actual_length <= packet->length);
+ memcpy(urb->transfer_buffer + packet->offset,
+ phys_to_virt(myNextRxDesc->buf), packet->actual_length);
+ if(packet->actual_length > 0)
+ isoc_dbg("Copied %d bytes, packet %d for URB:0x%x[%d]\n",
+ packet->actual_length, urb_priv->isoc_packet_counter,
+ (unsigned int)urb, urb_priv->urb_num);
+ }
+
+ /* Increment the packet counter. */
+ urb_priv->isoc_packet_counter++;
+
+ /* Note that we don't care about the eot field in the rx descriptor's
+ status. It will always be set for isoc traffic. */
+ if (urb->number_of_packets == urb_priv->isoc_packet_counter) {
+ /* Complete the urb with status OK. */
+ tc_finish_urb(hcd, urb, 0);
+ }
+ }
+
+ skip_out:
+ myNextRxDesc->status = 0;
+ myNextRxDesc->command |= IO_MASK(USB_IN_command, eol);
+ myLastRxDesc->command &= ~IO_MASK(USB_IN_command, eol);
+ myLastRxDesc = myNextRxDesc;
+ myNextRxDesc = phys_to_virt(myNextRxDesc->next);
+ flush_etrax_cache();
+ *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, restart);
+ }
+
+ local_irq_restore(flags);
+
+ return IRQ_HANDLED;
+}
+
+static void tc_bulk_start_timer_func(unsigned long dummy) {
+ /* We might enable an EP descriptor behind the current DMA position when
+ it's about to decide that there are no more bulk traffic and it should
+ stop the bulk channel.
+ Therefore we periodically check if the bulk channel is stopped and there
+ is an enabled bulk EP descriptor, in which case we start the bulk
+ channel. */
+
+ if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) {
+ int epid;
+
+ timer_dbg("bulk_start_timer: Bulk DMA channel not running.\n");
+
+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
+ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
+ timer_warn("Found enabled EP for epid %d, starting bulk channel.\n",
+ epid);
+ restart_dma8_sub0();
+
+ /* Restart the bulk eot timer since we just started the bulk channel.*/
+ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
+
+ /* No need to search any further. */
+ break;
+ }
+ }
+ } else {
+ timer_dbg("bulk_start_timer: Bulk DMA channel running.\n");
+ }
+}
+
+static void tc_bulk_eot_timer_func(unsigned long dummy) {
+ struct usb_hcd *hcd = (struct usb_hcd*)dummy;
+ ASSERT(hcd);
+ /* Because of a race condition in the top half, we might miss a bulk eot.
+ This timer "simulates" a bulk eot if we don't get one for a while,
+ hopefully correcting the situation. */
+ timer_dbg("bulk_eot_timer timed out.\n");
+ check_finished_bulk_tx_epids(hcd, 1);
+}
+
+
+/*************************************************************/
+/*************************************************************/
+/* Device driver block */
+/*************************************************************/
+/*************************************************************/
+
+/* Forward declarations for device driver functions */
+static int devdrv_hcd_probe(struct device *);
+static int devdrv_hcd_remove(struct device *);
+#ifdef CONFIG_PM
+static int devdrv_hcd_suspend(struct device *, u32, u32);
+static int devdrv_hcd_resume(struct device *, u32);
+#endif /* CONFIG_PM */
+
+/* the device */
+static struct platform_device *devdrv_hc_platform_device;
+
+/* device driver interface */
+static struct device_driver devdrv_hc_device_driver = {
+ .name = (char *) hc_name,
+ .bus = &platform_bus_type,
+
+ .probe = devdrv_hcd_probe,
+ .remove = devdrv_hcd_remove,
+
+#ifdef CONFIG_PM
+ .suspend = devdrv_hcd_suspend,
+ .resume = devdrv_hcd_resume,
+#endif /* CONFIG_PM */
+};
+
+/* initialize the host controller and driver */
+static int __init_or_module devdrv_hcd_probe(struct device *dev)
+{
+ struct usb_hcd *hcd;
+ struct crisv10_hcd *crisv10_hcd;
+ int retval;
+
+ /* Check DMA burst length */
+ if(IO_EXTRACT(R_BUS_CONFIG, dma_burst, *R_BUS_CONFIG) !=
+ IO_STATE(R_BUS_CONFIG, dma_burst, burst32)) {
+ devdrv_err("Invalid DMA burst length in Etrax 100LX,"
+ " needs to be 32\n");
+ return -EPERM;
+ }
+
+ hcd = usb_create_hcd(&crisv10_hc_driver, dev, dev->bus_id);
+ if (!hcd)
+ return -ENOMEM;
+
+ crisv10_hcd = hcd_to_crisv10_hcd(hcd);
+ spin_lock_init(&crisv10_hcd->lock);
+ crisv10_hcd->num_ports = num_ports();
+ crisv10_hcd->running = 0;
+
+ dev_set_drvdata(dev, crisv10_hcd);
+
+ devdrv_dbg("ETRAX USB IRQs HC:%d RX:%d TX:%d\n", ETRAX_USB_HC_IRQ,
+ ETRAX_USB_RX_IRQ, ETRAX_USB_TX_IRQ);
+
+ /* Print out chip version read from registers */
+ int rev_maj = *R_USB_REVISION & IO_MASK(R_USB_REVISION, major);
+ int rev_min = *R_USB_REVISION & IO_MASK(R_USB_REVISION, minor);
+ if(rev_min == 0) {
+ devdrv_info("Etrax 100LX USB Revision %d v1,2\n", rev_maj);
+ } else {
+ devdrv_info("Etrax 100LX USB Revision %d v%d\n", rev_maj, rev_min);
+ }
+
+ devdrv_info("Bulk timer interval, start:%d eot:%d\n",
+ BULK_START_TIMER_INTERVAL,
+ BULK_EOT_TIMER_INTERVAL);
+
+
+ /* Init root hub data structures */
+ if(rh_init()) {
+ devdrv_err("Failed init data for Root Hub\n");
+ retval = -ENOMEM;
+ }
+
+ if(port_in_use(0)) {
+ if (cris_request_io_interface(if_usb_1, "ETRAX100LX USB-HCD")) {
+ printk(KERN_CRIT "usb-host: request IO interface usb1 failed");
+ retval = -EBUSY;
+ goto out;
+ }
+ devdrv_info("Claimed interface for USB physical port 1\n");
+ }
+ if(port_in_use(1)) {
+ if (cris_request_io_interface(if_usb_2, "ETRAX100LX USB-HCD")) {
+ /* Free first interface if second failed to be claimed */
+ if(port_in_use(0)) {
+ cris_free_io_interface(if_usb_1);
+ }
+ printk(KERN_CRIT "usb-host: request IO interface usb2 failed");
+ retval = -EBUSY;
+ goto out;
+ }
+ devdrv_info("Claimed interface for USB physical port 2\n");
+ }
+
+ /* Init transfer controller structs and locks */
+ if((retval = tc_init(hcd)) != 0) {
+ goto out;
+ }
+
+ /* Attach interrupt functions for DMA and init DMA controller */
+ if((retval = tc_dma_init(hcd)) != 0) {
+ goto out;
+ }
+
+ /* Attach the top IRQ handler for USB controller interrupts */
+ if (request_irq(ETRAX_USB_HC_IRQ, crisv10_hcd_top_irq, 0,
+ "ETRAX 100LX built-in USB (HC)", hcd)) {
+ err("Could not allocate IRQ %d for USB", ETRAX_USB_HC_IRQ);
+ retval = -EBUSY;
+ goto out;
+ }
+
+ /* iso_eof is only enabled when isoc traffic is running. */
+ *R_USB_IRQ_MASK_SET =
+ /* IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set) | */
+ IO_STATE(R_USB_IRQ_MASK_SET, bulk_eot, set) |
+ IO_STATE(R_USB_IRQ_MASK_SET, epid_attn, set) |
+ IO_STATE(R_USB_IRQ_MASK_SET, port_status, set) |
+ IO_STATE(R_USB_IRQ_MASK_SET, ctl_status, set);
+
+
+ crisv10_ready_wait();
+ /* Reset the USB interface. */
+ *R_USB_COMMAND =
+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
+ IO_STATE(R_USB_COMMAND, ctrl_cmd, reset);
+
+ /* Designer's Reference, p. 8 - 10 says we should Initate R_USB_FM_PSTART to
+ 0x2A30 (10800), to guarantee that control traffic gets 10% of the
+ bandwidth, and periodic transfer may allocate the rest (90%).
+ This doesn't work though.
+ The value 11960 is chosen to be just after the SOF token, with a couple
+ of bit times extra for possible bit stuffing. */
+ *R_USB_FM_PSTART = IO_FIELD(R_USB_FM_PSTART, value, 11960);
+
+ crisv10_ready_wait();
+ /* Configure the USB interface as a host controller. */
+ *R_USB_COMMAND =
+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_config);
+
+
+ /* Check so controller not busy before enabling ports */
+ crisv10_ready_wait();
+
+ /* Enable selected USB ports */
+ if(port_in_use(0)) {
+ *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no);
+ } else {
+ *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, yes);
+ }
+ if(port_in_use(1)) {
+ *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no);
+ } else {
+ *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, yes);
+ }
+
+ crisv10_ready_wait();
+ /* Start processing of USB traffic. */
+ *R_USB_COMMAND =
+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
+
+ /* Do not continue probing initialization before USB interface is done */
+ crisv10_ready_wait();
+
+ /* Register our Host Controller to USB Core
+ * Finish the remaining parts of generic HCD initialization: allocate the
+ * buffers of consistent memory, register the bus
+ * and call the driver's reset() and start() routines. */
+ retval = usb_add_hcd(hcd, ETRAX_USB_HC_IRQ, IRQF_DISABLED);
+ if (retval != 0) {
+ devdrv_err("Failed registering HCD driver\n");
+ goto out;
+ }
+
+ return 0;
+
+ out:
+ devdrv_hcd_remove(dev);
+ return retval;
+}
+
+
+/* cleanup after the host controller and driver */
+static int __init_or_module devdrv_hcd_remove(struct device *dev)
+{
+ struct crisv10_hcd *crisv10_hcd = dev_get_drvdata(dev);
+ struct usb_hcd *hcd;
+
+ if (!crisv10_hcd)
+ return 0;
+ hcd = crisv10_hcd_to_hcd(crisv10_hcd);
+
+
+ /* Stop USB Controller in Etrax 100LX */
+ crisv10_hcd_reset(hcd);
+
+ usb_remove_hcd(hcd);
+ devdrv_dbg("Removed HCD from USB Core\n");
+
+ /* Free USB Controller IRQ */
+ free_irq(ETRAX_USB_HC_IRQ, NULL);
+
+ /* Free resources */
+ tc_dma_destroy();
+ tc_destroy();
+
+
+ if(port_in_use(0)) {
+ cris_free_io_interface(if_usb_1);
+ }
+ if(port_in_use(1)) {
+ cris_free_io_interface(if_usb_2);
+ }
+
+ devdrv_dbg("Freed all claimed resources\n");
+
+ return 0;
+}
+
+
+#ifdef CONFIG_PM
+
+static int devdrv_hcd_suspend(struct usb_hcd *hcd, u32 state, u32 level)
+{
+ return 0; /* no-op for now */
+}
+
+static int devdrv_hcd_resume(struct usb_hcd *hcd, u32 level)
+{
+ return 0; /* no-op for now */
+}
+
+#endif /* CONFIG_PM */
+
+
+
+/*************************************************************/
+/*************************************************************/
+/* Module block */
+/*************************************************************/
+/*************************************************************/
+
+/* register driver */
+static int __init module_hcd_init(void)
+{
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ /* Here we select enabled ports by following defines created from
+ menuconfig */
+#ifndef CONFIG_ETRAX_USB_HOST_PORT1
+ ports &= ~(1<<0);
+#endif
+#ifndef CONFIG_ETRAX_USB_HOST_PORT2
+ ports &= ~(1<<1);
+#endif
+
+ printk(KERN_INFO "%s version "VERSION" "COPYRIGHT"\n", product_desc);
+
+ devdrv_hc_platform_device =
+ platform_device_register_simple((char *) hc_name, 0, NULL, 0);
+
+ if (IS_ERR(devdrv_hc_platform_device))
+ return PTR_ERR(devdrv_hc_platform_device);
+ return driver_register(&devdrv_hc_device_driver);
+ /*
+ * Note that we do not set the DMA mask for the device,
+ * i.e. we pretend that we will use PIO, since no specific
+ * allocation routines are needed for DMA buffers. This will
+ * cause the HCD buffer allocation routines to fall back to
+ * kmalloc().
+ */
+}
+
+/* unregister driver */
+static void __exit module_hcd_exit(void)
+{
+ driver_unregister(&devdrv_hc_device_driver);
+}
+
+
+/* Module hooks */
+module_init(module_hcd_init);
+module_exit(module_hcd_exit);
--- linux-2.6.19.2.orig/drivers/usb/host/hc_crisv10.h 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2.dev/drivers/usb/host/hc_crisv10.h 1970-01-01 01:00:00.000000000 +0100
@@ -1,289 +0,0 @@
-#ifndef __LINUX_ETRAX_USB_H
-#define __LINUX_ETRAX_USB_H
-
-#include <linux/types.h>
-#include <linux/list.h>
-
-typedef struct USB_IN_Desc {
- volatile __u16 sw_len;
- volatile __u16 command;
- volatile unsigned long next;
- volatile unsigned long buf;
- volatile __u16 hw_len;
- volatile __u16 status;
-} USB_IN_Desc_t;
-
-typedef struct USB_SB_Desc {
- volatile __u16 sw_len;
- volatile __u16 command;
- volatile unsigned long next;
- volatile unsigned long buf;
- __u32 dummy;
-} USB_SB_Desc_t;
-
-typedef struct USB_EP_Desc {
- volatile __u16 hw_len;
- volatile __u16 command;
- volatile unsigned long sub;
- volatile unsigned long next;
- __u32 dummy;
-} USB_EP_Desc_t;
-
-struct virt_root_hub {
- int devnum;
- void *urb;
- void *int_addr;
- int send;
- int interval;
- int numports;
- struct timer_list rh_int_timer;
- volatile __u16 wPortChange_1;
- volatile __u16 wPortChange_2;
- volatile __u16 prev_wPortStatus_1;
- volatile __u16 prev_wPortStatus_2;
-};
-
-struct etrax_usb_intr_traffic {
- int sleeping;
- int error;
- struct wait_queue *wq;
-};
-
-typedef struct etrax_usb_hc {
- struct usb_bus *bus;
- struct virt_root_hub rh;
- struct etrax_usb_intr_traffic intr;
-} etrax_hc_t;
-
-typedef enum {
- STARTED,
- NOT_STARTED,
- UNLINK,
- TRANSFER_DONE,
- WAITING_FOR_DESCR_INTR
-} etrax_usb_urb_state_t;
-
-
-
-typedef struct etrax_usb_urb_priv {
- /* The first_sb field is used for freeing all SB descriptors belonging
- to an urb. The corresponding ep descriptor's sub pointer cannot be
- used for this since the DMA advances the sub pointer as it processes
- the sb list. */
- USB_SB_Desc_t *first_sb;
- /* The last_sb field referes to the last SB descriptor that belongs to
- this urb. This is important to know so we can free the SB descriptors
- that ranges between first_sb and last_sb. */
- USB_SB_Desc_t *last_sb;
-
- /* The rx_offset field is used in ctrl and bulk traffic to keep track
- of the offset in the urb's transfer_buffer where incoming data should be
- copied to. */
- __u32 rx_offset;
-
- /* Counter used in isochronous transfers to keep track of the
- number of packets received/transmitted. */
- __u32 isoc_packet_counter;
-
- /* This field is used to pass information about the urb's current state between
- the various interrupt handlers (thus marked volatile). */
- volatile etrax_usb_urb_state_t urb_state;
-
- /* Connection between the submitted urb and ETRAX epid number */
- __u8 epid;
-
- /* The rx_data_list field is used for periodic traffic, to hold
- received data for later processing in the the complete_urb functions,
- where the data us copied to the urb's transfer_buffer. Basically, we
- use this intermediate storage because we don't know when it's safe to
- reuse the transfer_buffer (FIXME?). */
- struct list_head rx_data_list;
-} etrax_urb_priv_t;
-
-/* This struct is for passing data from the top half to the bottom half. */
-typedef struct usb_interrupt_registers
-{
- etrax_hc_t *hc;
- __u32 r_usb_epid_attn;
- __u8 r_usb_status;
- __u16 r_usb_rh_port_status_1;
- __u16 r_usb_rh_port_status_2;
- __u32 r_usb_irq_mask_read;
- __u32 r_usb_fm_number;
- struct work_struct usb_bh;
-} usb_interrupt_registers_t;
-
-/* This struct is for passing data from the isoc top half to the isoc bottom half. */
-typedef struct usb_isoc_complete_data
-{
- struct urb *urb;
- struct work_struct usb_bh;
-} usb_isoc_complete_data_t;
-
-/* This struct holds data we get from the rx descriptors for DMA channel 9
- for periodic traffic (intr and isoc). */
-typedef struct rx_data
-{
- void *data;
- int length;
- struct list_head list;
-} rx_data_t;
-
-typedef struct urb_entry
-{
- struct urb *urb;
- struct list_head list;
-} urb_entry_t;
-
-/* ---------------------------------------------------------------------------
- Virtual Root HUB
- ------------------------------------------------------------------------- */
-/* destination of request */
-#define RH_INTERFACE 0x01
-#define RH_ENDPOINT 0x02
-#define RH_OTHER 0x03
-
-#define RH_CLASS 0x20
-#define RH_VENDOR 0x40
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS 0x0080
-#define RH_CLEAR_FEATURE 0x0100
-#define RH_SET_FEATURE 0x0300
-#define RH_SET_ADDRESS 0x0500
-#define RH_GET_DESCRIPTOR 0x0680
-#define RH_SET_DESCRIPTOR 0x0700
-#define RH_GET_CONFIGURATION 0x0880
-#define RH_SET_CONFIGURATION 0x0900
-#define RH_GET_STATE 0x0280
-#define RH_GET_INTERFACE 0x0A80
-#define RH_SET_INTERFACE 0x0B00
-#define RH_SYNC_FRAME 0x0C80
-/* Our Vendor Specific Request */
-#define RH_SET_EP 0x2000
-
-
-/* Hub port features */
-#define RH_PORT_CONNECTION 0x00
-#define RH_PORT_ENABLE 0x01
-#define RH_PORT_SUSPEND 0x02
-#define RH_PORT_OVER_CURRENT 0x03
-#define RH_PORT_RESET 0x04
-#define RH_PORT_POWER 0x08
-#define RH_PORT_LOW_SPEED 0x09
-#define RH_C_PORT_CONNECTION 0x10
-#define RH_C_PORT_ENABLE 0x11
-#define RH_C_PORT_SUSPEND 0x12
-#define RH_C_PORT_OVER_CURRENT 0x13
-#define RH_C_PORT_RESET 0x14
-
-/* Hub features */
-#define RH_C_HUB_LOCAL_POWER 0x00
-#define RH_C_HUB_OVER_CURRENT 0x01
-
-#define RH_DEVICE_REMOTE_WAKEUP 0x00
-#define RH_ENDPOINT_STALL 0x01
-
-/* Our Vendor Specific feature */
-#define RH_REMOVE_EP 0x00
-
-
-#define RH_ACK 0x01
-#define RH_REQ_ERR -1
-#define RH_NACK 0x00
-
-/* Field definitions for */
-
-#define USB_IN_command__eol__BITNR 0 /* command macros */
-#define USB_IN_command__eol__WIDTH 1
-#define USB_IN_command__eol__no 0
-#define USB_IN_command__eol__yes 1
-
-#define USB_IN_command__intr__BITNR 3
-#define USB_IN_command__intr__WIDTH 1
-#define USB_IN_command__intr__no 0
-#define USB_IN_command__intr__yes 1
-
-#define USB_IN_status__eop__BITNR 1 /* status macros. */
-#define USB_IN_status__eop__WIDTH 1
-#define USB_IN_status__eop__no 0
-#define USB_IN_status__eop__yes 1
-
-#define USB_IN_status__eot__BITNR 5
-#define USB_IN_status__eot__WIDTH 1
-#define USB_IN_status__eot__no 0
-#define USB_IN_status__eot__yes 1
-
-#define USB_IN_status__error__BITNR 6
-#define USB_IN_status__error__WIDTH 1
-#define USB_IN_status__error__no 0
-#define USB_IN_status__error__yes 1
-
-#define USB_IN_status__nodata__BITNR 7
-#define USB_IN_status__nodata__WIDTH 1
-#define USB_IN_status__nodata__no 0
-#define USB_IN_status__nodata__yes 1
-
-#define USB_IN_status__epid__BITNR 8
-#define USB_IN_status__epid__WIDTH 5
-
-#define USB_EP_command__eol__BITNR 0
-#define USB_EP_command__eol__WIDTH 1
-#define USB_EP_command__eol__no 0
-#define USB_EP_command__eol__yes 1
-
-#define USB_EP_command__eof__BITNR 1
-#define USB_EP_command__eof__WIDTH 1
-#define USB_EP_command__eof__no 0
-#define USB_EP_command__eof__yes 1
-
-#define USB_EP_command__intr__BITNR 3
-#define USB_EP_command__intr__WIDTH 1
-#define USB_EP_command__intr__no 0
-#define USB_EP_command__intr__yes 1
-
-#define USB_EP_command__enable__BITNR 4
-#define USB_EP_command__enable__WIDTH 1
-#define USB_EP_command__enable__no 0
-#define USB_EP_command__enable__yes 1
-
-#define USB_EP_command__hw_valid__BITNR 5
-#define USB_EP_command__hw_valid__WIDTH 1
-#define USB_EP_command__hw_valid__no 0
-#define USB_EP_command__hw_valid__yes 1
-
-#define USB_EP_command__epid__BITNR 8
-#define USB_EP_command__epid__WIDTH 5
-
-#define USB_SB_command__eol__BITNR 0 /* command macros. */
-#define USB_SB_command__eol__WIDTH 1
-#define USB_SB_command__eol__no 0
-#define USB_SB_command__eol__yes 1
-
-#define USB_SB_command__eot__BITNR 1
-#define USB_SB_command__eot__WIDTH 1
-#define USB_SB_command__eot__no 0
-#define USB_SB_command__eot__yes 1
-
-#define USB_SB_command__intr__BITNR 3
-#define USB_SB_command__intr__WIDTH 1
-#define USB_SB_command__intr__no 0
-#define USB_SB_command__intr__yes 1
-
-#define USB_SB_command__tt__BITNR 4
-#define USB_SB_command__tt__WIDTH 2
-#define USB_SB_command__tt__zout 0
-#define USB_SB_command__tt__in 1
-#define USB_SB_command__tt__out 2
-#define USB_SB_command__tt__setup 3
-
-
-#define USB_SB_command__rem__BITNR 8
-#define USB_SB_command__rem__WIDTH 6
-
-#define USB_SB_command__full__BITNR 6
-#define USB_SB_command__full__WIDTH 1
-#define USB_SB_command__full__no 0
-#define USB_SB_command__full__yes 1
-
-#endif
--- linux-2.6.19.2.orig/drivers/usb/host/hc-crisv10.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2.dev/drivers/usb/host/hc-crisv10.h 2006-01-27 13:59:58.000000000 +0100
@@ -0,0 +1,330 @@
+#ifndef __LINUX_ETRAX_USB_H
+#define __LINUX_ETRAX_USB_H
+
+#include <linux/types.h>
+#include <linux/list.h>
+
+struct USB_IN_Desc {
+ volatile __u16 sw_len;
+ volatile __u16 command;
+ volatile unsigned long next;
+ volatile unsigned long buf;
+ volatile __u16 hw_len;
+ volatile __u16 status;
+};
+
+struct USB_SB_Desc {
+ volatile __u16 sw_len;
+ volatile __u16 command;
+ volatile unsigned long next;
+ volatile unsigned long buf;
+};
+
+struct USB_EP_Desc {
+ volatile __u16 hw_len;
+ volatile __u16 command;
+ volatile unsigned long sub;
+ volatile unsigned long next;
+};
+
+
+/* Root Hub port status struct */
+struct crisv10_rh {
+ volatile __u16 wPortChange[2];
+ volatile __u16 wPortStatusPrev[2];
+};
+
+/* HCD description */
+struct crisv10_hcd {
+ spinlock_t lock;
+ __u8 num_ports;
+ __u8 running;
+};
+
+
+/* Endpoint HC private data description */
+struct crisv10_ep_priv {
+ int epid;
+};
+
+/* Additional software state info for a USB Controller epid */
+struct etrax_epid {
+ __u8 inuse; /* !0 = setup in Etrax and used for a endpoint */
+ __u8 disabled; /* !0 = Temporarly disabled to avoid resubmission */
+ __u8 type; /* Setup as: PIPE_BULK, PIPE_CONTROL ... */
+ __u8 out_traffic; /* !0 = This epid is for out traffic */
+};
+
+/* Struct to hold information of scheduled later URB completion */
+struct urb_later_data {
+ struct work_struct ws;
+ struct usb_hcd *hcd;
+ struct urb *urb;
+ int urb_num;
+ int status;
+};
+
+
+typedef enum {
+ STARTED,
+ NOT_STARTED,
+ UNLINK,
+} crisv10_urb_state_t;
+
+
+struct crisv10_urb_priv {
+ /* Sequence number for this URB. Every new submited URB gets this from
+ a incrementing counter. Used when a URB is scheduled for later finish to
+ be sure that the intended URB hasn't already been completed (device
+ drivers has a tendency to reuse URBs once they are completed, causing us
+ to not be able to single old ones out only based on the URB pointer.) */
+ __u32 urb_num;
+
+ /* The first_sb field is used for freeing all SB descriptors belonging
+ to an urb. The corresponding ep descriptor's sub pointer cannot be
+ used for this since the DMA advances the sub pointer as it processes
+ the sb list. */
+ struct USB_SB_Desc *first_sb;
+
+ /* The last_sb field referes to the last SB descriptor that belongs to
+ this urb. This is important to know so we can free the SB descriptors
+ that ranges between first_sb and last_sb. */
+ struct USB_SB_Desc *last_sb;
+
+ /* The rx_offset field is used in ctrl and bulk traffic to keep track
+ of the offset in the urb's transfer_buffer where incoming data should be
+ copied to. */
+ __u32 rx_offset;
+
+ /* Counter used in isochronous transfers to keep track of the
+ number of packets received/transmitted. */
+ __u32 isoc_packet_counter;
+
+ /* Flag that marks if this Isoc Out URB has finished it's transfer. Used
+ because several URBs can be finished before list is processed */
+ __u8 isoc_out_done;
+
+ /* This field is used to pass information about the urb's current state
+ between the various interrupt handlers (thus marked volatile). */
+ volatile crisv10_urb_state_t urb_state;
+
+ /* In Ctrl transfers consist of (at least) 3 packets: SETUP, IN and ZOUT.
+ When DMA8 sub-channel 2 has processed the SB list for this sequence we
+ get a interrupt. We also get a interrupt for In transfers and which
+ one of these interrupts that comes first depends of data size and device.
+ To be sure that we have got both interrupts before we complete the URB
+ we have these to flags that shows which part that has completed.
+ We can then check when we get one of the interrupts that if the other has
+ occured it's safe for us to complete the URB, otherwise we set appropriate
+ flag and do the completion when we get the other interrupt. */
+ volatile unsigned char ctrl_zout_done;
+ volatile unsigned char ctrl_rx_done;
+
+ /* Connection between the submitted urb and ETRAX epid number */
+ __u8 epid;
+
+ /* The rx_data_list field is used for periodic traffic, to hold
+ received data for later processing in the the complete_urb functions,
+ where the data us copied to the urb's transfer_buffer. Basically, we
+ use this intermediate storage because we don't know when it's safe to
+ reuse the transfer_buffer (FIXME?). */
+ struct list_head rx_data_list;
+
+
+ /* The interval time rounded up to closest 2^N */
+ int interval;
+
+ /* Pool of EP descriptors needed if it's a INTR transfer.
+ Amount of EPs in pool correspons to how many INTR that should
+ be inserted in TxIntrEPList (max 128, defined by MAX_INTR_INTERVAL) */
+ struct USB_EP_Desc* intr_ep_pool[128];
+
+ /* The mount of EPs allocated for this INTR URB */
+ int intr_ep_pool_length;
+
+ /* Pointer to info struct if URB is scheduled to be finished later */
+ struct urb_later_data* later_data;
+};
+
+
+/* This struct is for passing data from the top half to the bottom half irq
+ handlers */
+struct crisv10_irq_reg {
+ struct usb_hcd* hcd;
+ __u32 r_usb_epid_attn;
+ __u8 r_usb_status;
+ __u16 r_usb_rh_port_status_1;
+ __u16 r_usb_rh_port_status_2;
+ __u32 r_usb_irq_mask_read;
+ __u32 r_usb_fm_number;
+ struct work_struct usb_bh;
+};
+
+
+/* This struct is for passing data from the isoc top half to the isoc bottom
+ half. */
+struct crisv10_isoc_complete_data {
+ struct usb_hcd *hcd;
+ struct urb *urb;
+ struct work_struct usb_bh;
+};
+
+/* Entry item for URB lists for each endpint */
+typedef struct urb_entry
+{
+ struct urb *urb;
+ struct list_head list;
+} urb_entry_t;
+
+/* ---------------------------------------------------------------------------
+ Virtual Root HUB
+ ------------------------------------------------------------------------- */
+/* destination of request */
+#define RH_INTERFACE 0x01
+#define RH_ENDPOINT 0x02
+#define RH_OTHER 0x03
+
+#define RH_CLASS 0x20
+#define RH_VENDOR 0x40
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS 0x0080
+#define RH_CLEAR_FEATURE 0x0100
+#define RH_SET_FEATURE 0x0300
+#define RH_SET_ADDRESS 0x0500
+#define RH_GET_DESCRIPTOR 0x0680
+#define RH_SET_DESCRIPTOR 0x0700
+#define RH_GET_CONFIGURATION 0x0880
+#define RH_SET_CONFIGURATION 0x0900
+#define RH_GET_STATE 0x0280
+#define RH_GET_INTERFACE 0x0A80
+#define RH_SET_INTERFACE 0x0B00
+#define RH_SYNC_FRAME 0x0C80
+/* Our Vendor Specific Request */
+#define RH_SET_EP 0x2000
+
+
+/* Hub port features */
+#define RH_PORT_CONNECTION 0x00
+#define RH_PORT_ENABLE 0x01
+#define RH_PORT_SUSPEND 0x02
+#define RH_PORT_OVER_CURRENT 0x03
+#define RH_PORT_RESET 0x04
+#define RH_PORT_POWER 0x08
+#define RH_PORT_LOW_SPEED 0x09
+#define RH_C_PORT_CONNECTION 0x10
+#define RH_C_PORT_ENABLE 0x11
+#define RH_C_PORT_SUSPEND 0x12
+#define RH_C_PORT_OVER_CURRENT 0x13
+#define RH_C_PORT_RESET 0x14
+
+/* Hub features */
+#define RH_C_HUB_LOCAL_POWER 0x00
+#define RH_C_HUB_OVER_CURRENT 0x01
+
+#define RH_DEVICE_REMOTE_WAKEUP 0x00
+#define RH_ENDPOINT_STALL 0x01
+
+/* Our Vendor Specific feature */
+#define RH_REMOVE_EP 0x00
+
+
+#define RH_ACK 0x01
+#define RH_REQ_ERR -1
+#define RH_NACK 0x00
+
+/* Field definitions for */
+
+#define USB_IN_command__eol__BITNR 0 /* command macros */
+#define USB_IN_command__eol__WIDTH 1
+#define USB_IN_command__eol__no 0
+#define USB_IN_command__eol__yes 1
+
+#define USB_IN_command__intr__BITNR 3
+#define USB_IN_command__intr__WIDTH 1
+#define USB_IN_command__intr__no 0
+#define USB_IN_command__intr__yes 1
+
+#define USB_IN_status__eop__BITNR 1 /* status macros. */
+#define USB_IN_status__eop__WIDTH 1
+#define USB_IN_status__eop__no 0
+#define USB_IN_status__eop__yes 1
+
+#define USB_IN_status__eot__BITNR 5
+#define USB_IN_status__eot__WIDTH 1
+#define USB_IN_status__eot__no 0
+#define USB_IN_status__eot__yes 1
+
+#define USB_IN_status__error__BITNR 6
+#define USB_IN_status__error__WIDTH 1
+#define USB_IN_status__error__no 0
+#define USB_IN_status__error__yes 1
+
+#define USB_IN_status__nodata__BITNR 7
+#define USB_IN_status__nodata__WIDTH 1
+#define USB_IN_status__nodata__no 0
+#define USB_IN_status__nodata__yes 1
+
+#define USB_IN_status__epid__BITNR 8
+#define USB_IN_status__epid__WIDTH 5
+
+#define USB_EP_command__eol__BITNR 0
+#define USB_EP_command__eol__WIDTH 1
+#define USB_EP_command__eol__no 0
+#define USB_EP_command__eol__yes 1
+
+#define USB_EP_command__eof__BITNR 1
+#define USB_EP_command__eof__WIDTH 1
+#define USB_EP_command__eof__no 0
+#define USB_EP_command__eof__yes 1
+
+#define USB_EP_command__intr__BITNR 3
+#define USB_EP_command__intr__WIDTH 1
+#define USB_EP_command__intr__no 0
+#define USB_EP_command__intr__yes 1
+
+#define USB_EP_command__enable__BITNR 4
+#define USB_EP_command__enable__WIDTH 1
+#define USB_EP_command__enable__no 0
+#define USB_EP_command__enable__yes 1
+
+#define USB_EP_command__hw_valid__BITNR 5
+#define USB_EP_command__hw_valid__WIDTH 1
+#define USB_EP_command__hw_valid__no 0
+#define USB_EP_command__hw_valid__yes 1
+
+#define USB_EP_command__epid__BITNR 8
+#define USB_EP_command__epid__WIDTH 5
+
+#define USB_SB_command__eol__BITNR 0 /* command macros. */
+#define USB_SB_command__eol__WIDTH 1
+#define USB_SB_command__eol__no 0
+#define USB_SB_command__eol__yes 1
+
+#define USB_SB_command__eot__BITNR 1
+#define USB_SB_command__eot__WIDTH 1
+#define USB_SB_command__eot__no 0
+#define USB_SB_command__eot__yes 1
+
+#define USB_SB_command__intr__BITNR 3
+#define USB_SB_command__intr__WIDTH 1
+#define USB_SB_command__intr__no 0
+#define USB_SB_command__intr__yes 1
+
+#define USB_SB_command__tt__BITNR 4
+#define USB_SB_command__tt__WIDTH 2
+#define USB_SB_command__tt__zout 0
+#define USB_SB_command__tt__in 1
+#define USB_SB_command__tt__out 2
+#define USB_SB_command__tt__setup 3
+
+
+#define USB_SB_command__rem__BITNR 8
+#define USB_SB_command__rem__WIDTH 6
+
+#define USB_SB_command__full__BITNR 6
+#define USB_SB_command__full__WIDTH 1
+#define USB_SB_command__full__no 0
+#define USB_SB_command__full__yes 1
+
+#endif
diff -urN linux-2.6.19.2.orig/drivers/net/cris/Makefile linux-2.6.19.2.dev/drivers/net/cris/Makefile
--- linux-2.6.19.2.orig/drivers/net/cris/Makefile 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2.dev/drivers/net/cris/Makefile 2005-01-04 13:09:12.000000000 +0100
@@ -1 +1,2 @@
obj-$(CONFIG_ETRAX_ARCH_V10) += eth_v10.o
+obj-$(CONFIG_ETRAX_ARCH_V32) += eth_v32.o
diff -urN linux-2.6.19.2.orig/drivers/net/cris/eth_v10.c linux-2.6.19.2.dev/drivers/net/cris/eth_v10.c
--- linux-2.6.19.2.orig/drivers/net/cris/eth_v10.c 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2.dev/drivers/net/cris/eth_v10.c 2007-01-15 16:35:48.000000000 +0100
@@ -1,221 +1,10 @@
-/* $Id: ethernet.c,v 1.31 2004/10/18 14:49:03 starvik Exp $
- *
- * e100net.c: A network driver for the ETRAX 100LX network controller.
+/*
+ * Driver for the ETRAX 100LX network controller.
*
- * Copyright (c) 1998-2002 Axis Communications AB.
+ * Copyright (c) 1998-2006 Axis Communications AB.
*
* The outline of this driver comes from skeleton.c.
*
- * $Log: ethernet.c,v $
- * Revision 1.31 2004/10/18 14:49:03 starvik
- * Use RX interrupt as random source
- *
- * Revision 1.30 2004/09/29 10:44:04 starvik
- * Enabed MAC-address output again
- *
- * Revision 1.29 2004/08/24 07:14:05 starvik
- * Make use of generic MDIO interface and constants.
- *
- * Revision 1.28 2004/08/20 09:37:11 starvik
- * Added support for Intel LXT972A. Creds to Randy Scarborough.
- *
- * Revision 1.27 2004/08/16 12:37:22 starvik
- * Merge of Linux 2.6.8
- *
- * Revision 1.25 2004/06/21 10:29:57 starvik
- * Merge of Linux 2.6.7
- *
- * Revision 1.23 2004/06/09 05:29:22 starvik
- * Avoid any race where R_DMA_CH1_FIRST is NULL (may trigger cache bug).
- *
- * Revision 1.22 2004/05/14 07:58:03 starvik
- * Merge of changes from 2.4
- *
- * Revision 1.20 2004/03/11 11:38:40 starvik
- * Merge of Linux 2.6.4
- *
- * Revision 1.18 2003/12/03 13:45:46 starvik
- * Use hardware pad for short packets to prevent information leakage.
- *
- * Revision 1.17 2003/07/04 08:27:37 starvik
- * Merge of Linux 2.5.74
- *
- * Revision 1.16 2003/04/24 08:28:22 starvik
- * New LED behaviour: LED off when no link
- *
- * Revision 1.15 2003/04/09 05:20:47 starvik
- * Merge of Linux 2.5.67
- *
- * Revision 1.13 2003/03/06 16:11:01 henriken
- * Off by one error in group address register setting.
- *
- * Revision 1.12 2003/02/27 17:24:19 starvik
- * Corrected Rev to Revision
- *
- * Revision 1.11 2003/01/24 09:53:21 starvik
- * Oops. Initialize GA to 0, not to 1
- *
- * Revision 1.10 2003/01/24 09:50:55 starvik
- * Initialize GA_0 and GA_1 to 0 to avoid matching of unwanted packets
- *
- * Revision 1.9 2002/12/13 07:40:58 starvik
- * Added basic ethtool interface
- * Handled out of memory when allocating new buffers
- *
- * Revision 1.8 2002/12/11 13:13:57 starvik
- * Added arch/ to v10 specific includes
- * Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer)
- *
- * Revision 1.7 2002/11/26 09:41:42 starvik
- * Added e100_set_config (standard interface to set media type)
- * Added protection against preemptive scheduling
- * Added standard MII ioctls
- *
- * Revision 1.6 2002/11/21 07:18:18 starvik
- * Timers must be initialized in 2.5.48
- *
- * Revision 1.5 2002/11/20 11:56:11 starvik
- * Merge of Linux 2.5.48
- *
- * Revision 1.4 2002/11/18 07:26:46 starvik
- * Linux 2.5 port of latest Linux 2.4 ethernet driver
- *
- * Revision 1.33 2002/10/02 20:16:17 hp
- * SETF, SETS: Use underscored IO_x_ macros rather than incorrect token concatenation
- *
- * Revision 1.32 2002/09/16 06:05:58 starvik
- * Align memory returned by dev_alloc_skb
- * Moved handling of sent packets to interrupt to avoid reference counting problem
- *
- * Revision 1.31 2002/09/10 13:28:23 larsv
- * Return -EINVAL for unknown ioctls to avoid confusing tools that tests
- * for supported functionality by issuing special ioctls, i.e. wireless
- * extensions.
- *
- * Revision 1.30 2002/05/07 18:50:08 johana
- * Correct spelling in comments.
- *
- * Revision 1.29 2002/05/06 05:38:49 starvik
- * Performance improvements:
- * Large packets are not copied (breakpoint set to 256 bytes)
- * The cache bug workaround is delayed until half of the receive list
- * has been used
- * Added transmit list
- * Transmit interrupts are only enabled when transmit queue is full
- *
- * Revision 1.28.2.1 2002/04/30 08:15:51 starvik
- * Performance improvements:
- * Large packets are not copied (breakpoint set to 256 bytes)
- * The cache bug workaround is delayed until half of the receive list
- * has been used.
- * Added transmit list
- * Transmit interrupts are only enabled when transmit queue is full
- *
- * Revision 1.28 2002/04/22 11:47:21 johana
- * Fix according to 2.4.19-pre7. time_after/time_before and
- * missing end of comment.
- * The patch has a typo for ethernet.c in e100_clear_network_leds(),
- * that is fixed here.
- *
- * Revision 1.27 2002/04/12 11:55:11 bjornw
- * Added TODO
- *
- * Revision 1.26 2002/03/15 17:11:02 bjornw
- * Use prepare_rx_descriptor after the CPU has touched the receiving descs
- *
- * Revision 1.25 2002/03/08 13:07:53 bjornw
- * Unnecessary spinlock removed
- *
- * Revision 1.24 2002/02/20 12:57:43 fredriks
- * Replaced MIN() with min().
- *
- * Revision 1.23 2002/02/20 10:58:14 fredriks
- * Strip the Ethernet checksum (4 bytes) before forwarding a frame to upper layers.
- *
- * Revision 1.22 2002/01/30 07:48:22 matsfg
- * Initiate R_NETWORK_TR_CTRL
- *
- * Revision 1.21 2001/11/23 11:54:49 starvik
- * Added IFF_PROMISC and IFF_ALLMULTI handling in set_multicast_list
- * Removed compiler warnings
- *
- * Revision 1.20 2001/11/12 19:26:00 pkj
- * * Corrected e100_negotiate() to not assign half to current_duplex when
- * it was supposed to compare them...
- * * Cleaned up failure handling in e100_open().
- * * Fixed compiler warnings.
- *
- * Revision 1.19 2001/11/09 07:43:09 starvik
- * Added full duplex support
- * Added ioctl to set speed and duplex
- * Clear LED timer only runs when LED is lit
- *
- * Revision 1.18 2001/10/03 14:40:43 jonashg
- * Update rx_bytes counter.
- *
- * Revision 1.17 2001/06/11 12:43:46 olof
- * Modified defines for network LED behavior
- *
- * Revision 1.16 2001/05/30 06:12:46 markusl
- * TxDesc.next should not be set to NULL
- *
- * Revision 1.15 2001/05/29 10:27:04 markusl
- * Updated after review remarks:
- * +Use IO_EXTRACT
- * +Handle underrun
- *
- * Revision 1.14 2001/05/29 09:20:14 jonashg
- * Use driver name on printk output so one can tell which driver that complains.
- *
- * Revision 1.13 2001/05/09 12:35:59 johana
- * Use DMA_NBR and IRQ_NBR defines from dma.h and irq.h
- *
- * Revision 1.12 2001/04/05 11:43:11 tobiasa
- * Check dev before panic.
- *
- * Revision 1.11 2001/04/04 11:21:05 markusl
- * Updated according to review remarks
- *
- * Revision 1.10 2001/03/26 16:03:06 bjornw
- * Needs linux/config.h
- *
- * Revision 1.9 2001/03/19 14:47:48 pkj
- * * Make sure there is always a pause after the network LEDs are
- * changed so they will not look constantly lit during heavy traffic.
- * * Always use HZ when setting times relative to jiffies.
- * * Use LED_NETWORK_SET() when setting the network LEDs.
- *
- * Revision 1.8 2001/02/27 13:52:48 bjornw
- * malloc.h -> slab.h
- *
- * Revision 1.7 2001/02/23 13:46:38 bjornw
- * Spellling check
- *
- * Revision 1.6 2001/01/26 15:21:04 starvik
- * Don't disable interrupts while reading MDIO registers (MDIO is slow)
- * Corrected promiscuous mode
- * Improved deallocation of IRQs ("ifconfig eth0 down" now works)
- *
- * Revision 1.5 2000/11/29 17:22:22 bjornw
- * Get rid of the udword types legacy stuff
- *
- * Revision 1.4 2000/11/22 16:36:09 bjornw
- * Please marketing by using the correct case when spelling Etrax.
- *
- * Revision 1.3 2000/11/21 16:43:04 bjornw
- * Minor short->int change
- *
- * Revision 1.2 2000/11/08 14:27:57 bjornw
- * 2.4 port
- *
- * Revision 1.1 2000/11/06 13:56:00 bjornw
- * Verbatim copy of the 1.24 version of e100net.c from elinux
- *
- * Revision 1.24 2000/10/04 15:55:23 bjornw
- * * Use virt_to_phys etc. for DMA addresses
- * * Removed bogus CHECKSUM_UNNECESSARY
- *
- *
*/
@@ -251,6 +40,7 @@
#include <asm/bitops.h>
#include <asm/ethernet.h>
#include <asm/cache.h>
+#include <asm/arch/io_interface_mux.h>
//#define ETHDEBUG
#define D(x)
@@ -280,6 +70,9 @@
* by this lock as well.
*/
spinlock_t lock;
+
+ spinlock_t led_lock; /* Protect LED state */
+ spinlock_t transceiver_lock; /* Protect transceiver state. */
};
typedef struct etrax_eth_descr
@@ -296,8 +89,6 @@
void (*check_duplex)(struct net_device* dev);
};
-struct transceiver_ops* transceiver;
-
/* Duplex settings */
enum duplex
{
@@ -308,7 +99,7 @@
/* Dma descriptors etc. */
-#define MAX_MEDIA_DATA_SIZE 1518
+#define MAX_MEDIA_DATA_SIZE 1522
#define MIN_PACKET_LEN 46
#define ETHER_HEAD_LEN 14
@@ -332,9 +123,9 @@
#define MDIO_TDK_DIAGNOSTIC_DPLX 0x800
/*Intel LXT972A specific*/
-#define MDIO_INT_STATUS_REG_2 0x0011
-#define MDIO_INT_FULL_DUPLEX_IND ( 1 << 9 )
-#define MDIO_INT_SPEED ( 1 << 14 )
+#define MDIO_INT_STATUS_REG_2 0x0011
+#define MDIO_INT_FULL_DUPLEX_IND (1 << 9)
+#define MDIO_INT_SPEED (1 << 14)
/* Network flash constants */
#define NET_FLASH_TIME (HZ/50) /* 20 ms */
@@ -345,8 +136,8 @@
#define NO_NETWORK_ACTIVITY 0
#define NETWORK_ACTIVITY 1
-#define NBR_OF_RX_DESC 64
-#define NBR_OF_TX_DESC 256
+#define NBR_OF_RX_DESC 32
+#define NBR_OF_TX_DESC 16
/* Large packets are sent directly to upper layers while small packets are */
/* copied (to reduce memory waste). The following constant decides the breakpoint */
@@ -368,7 +159,6 @@
static etrax_eth_descr *myNextRxDesc; /* Points to the next descriptor to
to be processed */
static etrax_eth_descr *myLastRxDesc; /* The last processed descriptor */
-static etrax_eth_descr *myPrevRxDesc; /* The descriptor right before myNextRxDesc */
static etrax_eth_descr RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned(32)));
@@ -378,7 +168,6 @@
static etrax_eth_descr TxDescList[NBR_OF_TX_DESC] __attribute__ ((aligned(32)));
static unsigned int network_rec_config_shadow = 0;
-static unsigned int mdio_phy_addr; /* Transciever address */
static unsigned int network_tr_ctrl_shadow = 0;
@@ -412,7 +201,7 @@
static void e100_tx_timeout(struct net_device *dev);
static struct net_device_stats *e100_get_stats(struct net_device *dev);
static void set_multicast_list(struct net_device *dev);
-static void e100_hardware_send_packet(char *buf, int length);
+static void e100_hardware_send_packet(struct net_local* np, char *buf, int length);
static void update_rx_stats(struct net_device_stats *);
static void update_tx_stats(struct net_device_stats *);
static int e100_probe_transceiver(struct net_device* dev);
@@ -435,7 +224,10 @@
static void e100_set_network_leds(int active);
static const struct ethtool_ops e100_ethtool_ops;
-
+#if defined(CONFIG_ETRAX_NO_PHY)
+static void dummy_check_speed(struct net_device* dev);
+static void dummy_check_duplex(struct net_device* dev);
+#else
static void broadcom_check_speed(struct net_device* dev);
static void broadcom_check_duplex(struct net_device* dev);
static void tdk_check_speed(struct net_device* dev);
@@ -444,16 +236,29 @@
static void intel_check_duplex(struct net_device* dev);
static void generic_check_speed(struct net_device* dev);
static void generic_check_duplex(struct net_device* dev);
+#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void e100_netpoll(struct net_device* dev);
+#endif
+
+static int autoneg_normal = 1;
struct transceiver_ops transceivers[] =
{
+#if defined(CONFIG_ETRAX_NO_PHY)
+ {0x0000, dummy_check_speed, dummy_check_duplex} /* Dummy */
+#else
{0x1018, broadcom_check_speed, broadcom_check_duplex}, /* Broadcom */
{0xC039, tdk_check_speed, tdk_check_duplex}, /* TDK 2120 */
{0x039C, tdk_check_speed, tdk_check_duplex}, /* TDK 2120C */
- {0x04de, intel_check_speed, intel_check_duplex}, /* Intel LXT972A*/
+ {0x04de, intel_check_speed, intel_check_duplex}, /* Intel LXT972A*/
{0x0000, generic_check_speed, generic_check_duplex} /* Generic, must be last */
+#endif
};
+struct transceiver_ops* transceiver = &transceivers[0];
+static unsigned int mdio_phy_addr = 0; /* PHY address on MDIO bus */
+
#define tx_done(dev) (*R_DMA_CH0_CMD == 0)
/*
@@ -468,18 +273,26 @@
etrax_ethernet_init(void)
{
struct net_device *dev;
- struct net_local* np;
+ struct net_local* np;
int i, err;
printk(KERN_INFO
- "ETRAX 100LX 10/100MBit ethernet v2.0 (c) 2000-2003 Axis Communications AB\n");
-
+ "ETRAX 100LX 10/100MBit ethernet v2.0 (c) 1998-2006 Axis Communications AB\n");
+
+ if (cris_request_io_interface(if_eth, cardname)) {
+ printk(KERN_CRIT "etrax_ethernet_init failed to get IO interface\n");
+ return -EBUSY;
+ }
+
dev = alloc_etherdev(sizeof(struct net_local));
- np = dev->priv;
-
if (!dev)
return -ENOMEM;
+
+ np = netdev_priv(dev);
+ /* we do our own locking */
+ dev->features |= NETIF_F_LLTX;
+
dev->base_addr = (unsigned int)R_NETWORK_SA_0; /* just to have something to show */
/* now setup our etrax specific stuff */
@@ -495,18 +308,26 @@
dev->get_stats = e100_get_stats;
dev->set_multicast_list = set_multicast_list;
dev->set_mac_address = e100_set_mac_address;
- dev->ethtool_ops = &e100_ethtool_ops;
+ dev->ethtool_ops = &e100_ethtool_ops;
dev->do_ioctl = e100_ioctl;
- dev->set_config = e100_set_config;
+ dev->set_config = e100_set_config;
dev->tx_timeout = e100_tx_timeout;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = e100_netpoll;
+#endif
+
+ spin_lock_init(&np->lock);
+ spin_lock_init(&np->led_lock);
+ spin_lock_init(&np->transceiver_lock);
/* Initialise the list of Etrax DMA-descriptors */
/* Initialise receive descriptors */
for (i = 0; i < NBR_OF_RX_DESC; i++) {
- /* Allocate two extra cachelines to make sure that buffer used by DMA
- * does not share cacheline with any other data (to avoid cache bug)
+ /* Allocate two extra cachelines to make sure that buffer used
+ * by DMA does not share cacheline with any other data (to
+ * avoid cache bug)
*/
RxDescList[i].skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES);
if (!RxDescList[i].skb)
@@ -517,6 +338,7 @@
RxDescList[i].descr.buf = L1_CACHE_ALIGN(virt_to_phys(RxDescList[i].skb->data));
RxDescList[i].descr.status = 0;
RxDescList[i].descr.hw_len = 0;
+
prepare_rx_descriptor(&RxDescList[i].descr);
}
@@ -542,7 +364,6 @@
myNextRxDesc = &RxDescList[0];
myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1];
- myPrevRxDesc = &RxDescList[NBR_OF_RX_DESC - 1];
myFirstTxDesc = &TxDescList[0];
myNextTxDesc = &TxDescList[0];
myLastTxDesc = &TxDescList[NBR_OF_TX_DESC - 1];
@@ -563,18 +384,19 @@
current_speed = 10;
current_speed_selection = 0; /* Auto */
speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL;
- duplex_timer.data = (unsigned long)dev;
+ speed_timer.data = (unsigned long)dev;
speed_timer.function = e100_check_speed;
clear_led_timer.function = e100_clear_network_leds;
+ clear_led_timer.data = (unsigned long)dev;
full_duplex = 0;
current_duplex = autoneg;
duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL;
- duplex_timer.data = (unsigned long)dev;
+ duplex_timer.data = (unsigned long)dev;
duplex_timer.function = e100_check_duplex;
- /* Initialize mii interface */
+ /* Initialize mii interface */
np->mii_if.phy_id = mdio_phy_addr;
np->mii_if.phy_id_mask = 0x1f;
np->mii_if.reg_num_mask = 0x1f;
@@ -586,6 +408,9 @@
/* unwanted addresses are matched */
*R_NETWORK_GA_0 = 0x00000000;
*R_NETWORK_GA_1 = 0x00000000;
+
+ /* Initialize next time the led can flash */
+ led_next_time = jiffies;
return 0;
}
@@ -596,7 +421,7 @@
static int
e100_set_mac_address(struct net_device *dev, void *p)
{
- struct net_local *np = (struct net_local *)dev->priv;
+ struct net_local *np = netdev_priv(dev);
struct sockaddr *addr = p;
int i;
@@ -680,17 +505,36 @@
/* allocate the irq corresponding to the transmitting DMA */
if (request_irq(NETWORK_DMA_TX_IRQ_NBR, e100rxtx_interrupt, 0,
- cardname, (void *)dev)) {
+ cardname, (void *)dev)) {
goto grace_exit1;
}
/* allocate the irq corresponding to the network errors etc */
if (request_irq(NETWORK_STATUS_IRQ_NBR, e100nw_interrupt, 0,
- cardname, (void *)dev)) {
+ cardname, (void *)dev)) {
goto grace_exit2;
}
+ /*
+ * Always allocate the DMA channels after the IRQ,
+ * and clean up on failure.
+ */
+
+ if (cris_request_dma(NETWORK_TX_DMA_NBR,
+ cardname,
+ DMA_VERBOSE_ON_ERROR,
+ dma_eth)) {
+ goto grace_exit3;
+ }
+
+ if (cris_request_dma(NETWORK_RX_DMA_NBR,
+ cardname,
+ DMA_VERBOSE_ON_ERROR,
+ dma_eth)) {
+ goto grace_exit4;
+ }
+
/* give the HW an idea of what MAC address we want */
*R_NETWORK_SA_0 = dev->dev_addr[0] | (dev->dev_addr[1] << 8) |
@@ -705,6 +549,7 @@
*R_NETWORK_REC_CONFIG = 0xd; /* broadcast rec, individ. rec, ma0 enabled */
#else
+ SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, max_size, size1522);
SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, broadcast, receive);
SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, ma0, enable);
SETF(network_rec_config_shadow, R_NETWORK_REC_CONFIG, duplex, full_duplex);
@@ -724,8 +569,7 @@
SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, crc, enable);
*R_NETWORK_TR_CTRL = network_tr_ctrl_shadow;
- save_flags(flags);
- cli();
+ local_irq_save(flags);
/* enable the irq's for ethernet DMA */
@@ -757,12 +601,13 @@
*R_DMA_CH0_FIRST = 0;
*R_DMA_CH0_DESCR = virt_to_phys(myLastTxDesc);
+ netif_start_queue(dev);
- restore_flags(flags);
+ local_irq_restore(flags);
/* Probe for transceiver */
if (e100_probe_transceiver(dev))
- goto grace_exit3;
+ goto grace_exit5;
/* Start duplex/speed timers */
add_timer(&speed_timer);
@@ -771,10 +616,14 @@
/* We are now ready to accept transmit requeusts from
* the queueing layer of the networking.
*/
- netif_start_queue(dev);
+ netif_carrier_on(dev);
return 0;
+grace_exit5:
+ cris_free_dma(NETWORK_RX_DMA_NBR, cardname);
+grace_exit4:
+ cris_free_dma(NETWORK_TX_DMA_NBR, cardname);
grace_exit3:
free_irq(NETWORK_STATUS_IRQ_NBR, (void *)dev);
grace_exit2:
@@ -785,7 +634,13 @@
return -EAGAIN;
}
-
+#if defined(CONFIG_ETRAX_NO_PHY)
+static void
+dummy_check_speed(struct net_device* dev)
+{
+ current_speed = 100;
+}
+#else
static void
generic_check_speed(struct net_device* dev)
{
@@ -821,15 +676,18 @@
data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_INT_STATUS_REG_2);
current_speed = (data & MDIO_INT_SPEED ? 100 : 10);
}
-
+#endif
static void
e100_check_speed(unsigned long priv)
{
struct net_device* dev = (struct net_device*)priv;
+ struct net_local *np = netdev_priv(dev);
static int led_initiated = 0;
unsigned long data;
int old_speed = current_speed;
+ spin_lock(&np->transceiver_lock);
+
data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMSR);
if (!(data & BMSR_LSTATUS)) {
current_speed = 0;
@@ -837,14 +695,22 @@
transceiver->check_speed(dev);
}
+ spin_lock(&np->led_lock);
if ((old_speed != current_speed) || !led_initiated) {
led_initiated = 1;
e100_set_network_leds(NO_NETWORK_ACTIVITY);
+ if (current_speed)
+ netif_carrier_on(dev);
+ else
+ netif_carrier_off(dev);
}
+ spin_unlock(&np->led_lock);
/* Reinitialize the timer. */
speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL;
add_timer(&speed_timer);
+
+ spin_unlock(&np->transceiver_lock);
}
static void
@@ -857,7 +723,7 @@
ADVERTISE_10HALF | ADVERTISE_10FULL);
switch (current_speed_selection) {
- case 10 :
+ case 10:
if (current_duplex == full)
data |= ADVERTISE_10FULL;
else if (current_duplex == half)
@@ -866,7 +732,7 @@
data |= ADVERTISE_10HALF | ADVERTISE_10FULL;
break;
- case 100 :
+ case 100:
if (current_duplex == full)
data |= ADVERTISE_100FULL;
else if (current_duplex == half)
@@ -875,45 +741,54 @@
data |= ADVERTISE_100HALF | ADVERTISE_100FULL;
break;
- case 0 : /* Auto */
+ case 0: /* Auto */
if (current_duplex == full)
data |= ADVERTISE_100FULL | ADVERTISE_10FULL;
else if (current_duplex == half)
data |= ADVERTISE_100HALF | ADVERTISE_10HALF;
else
data |= ADVERTISE_10HALF | ADVERTISE_10FULL |
- ADVERTISE_100HALF | ADVERTISE_100FULL;
+ ADVERTISE_100HALF | ADVERTISE_100FULL;
break;
- default : /* assume autoneg speed and duplex */
+ default: /* assume autoneg speed and duplex */
data |= ADVERTISE_10HALF | ADVERTISE_10FULL |
- ADVERTISE_100HALF | ADVERTISE_100FULL;
+ ADVERTISE_100HALF | ADVERTISE_100FULL;
+ break;
}
e100_set_mdio_reg(dev, mdio_phy_addr, MII_ADVERTISE, data);
/* Renegotiate with link partner */
- data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMCR);
- data |= BMCR_ANENABLE | BMCR_ANRESTART;
-
+ if (autoneg_normal) {
+ data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMCR);
+ data |= BMCR_ANENABLE | BMCR_ANRESTART;
+ }
e100_set_mdio_reg(dev, mdio_phy_addr, MII_BMCR, data);
}
static void
e100_set_speed(struct net_device* dev, unsigned long speed)
{
+ struct net_local *np = netdev_priv(dev);
+
+ spin_lock(&np->transceiver_lock);
if (speed != current_speed_selection) {
current_speed_selection = speed;
e100_negotiate(dev);
}
+ spin_unlock(&np->transceiver_lock);
}
static void
e100_check_duplex(unsigned long priv)
{
struct net_device *dev = (struct net_device *)priv;
- struct net_local *np = (struct net_local *)dev->priv;
- int old_duplex = full_duplex;
+ struct net_local *np = netdev_priv(dev);
+ int old_duplex;
+
+ spin_lock(&np->transceiver_lock);
+ old_duplex = full_duplex;
transceiver->check_duplex(dev);
if (old_duplex != full_duplex) {
/* Duplex changed */
@@ -925,12 +800,20 @@
duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL;
add_timer(&duplex_timer);
np->mii_if.full_duplex = full_duplex;
+ spin_unlock(&np->transceiver_lock);
}
-
+#if defined(CONFIG_ETRAX_NO_PHY)
+static void
+dummy_check_duplex(struct net_device* dev)
+{
+ full_duplex = 1;
+}
+#else
static void
generic_check_duplex(struct net_device* dev)
{
unsigned long data;
+
data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_ADVERTISE);
if ((data & ADVERTISE_10FULL) ||
(data & ADVERTISE_100FULL))
@@ -943,6 +826,7 @@
tdk_check_duplex(struct net_device* dev)
{
unsigned long data;
+
data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_TDK_DIAGNOSTIC_REG);
full_duplex = (data & MDIO_TDK_DIAGNOSTIC_DPLX) ? 1 : 0;
}
@@ -951,6 +835,7 @@
broadcom_check_duplex(struct net_device* dev)
{
unsigned long data;
+
data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_AUX_CTRL_STATUS_REG);
full_duplex = (data & MDIO_BC_FULL_DUPLEX_IND) ? 1 : 0;
}
@@ -959,26 +844,35 @@
intel_check_duplex(struct net_device* dev)
{
unsigned long data;
+
data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_INT_STATUS_REG_2);
full_duplex = (data & MDIO_INT_FULL_DUPLEX_IND) ? 1 : 0;
}
-
+#endif
static void
e100_set_duplex(struct net_device* dev, enum duplex new_duplex)
{
+ struct net_local *np = netdev_priv(dev);
+
+ spin_lock(&np->transceiver_lock);
if (new_duplex != current_duplex) {
current_duplex = new_duplex;
e100_negotiate(dev);
}
+ spin_unlock(&np->transceiver_lock);
}
static int
e100_probe_transceiver(struct net_device* dev)
{
+#if !defined(CONFIG_ETRAX_NO_PHY)
unsigned int phyid_high;
unsigned int phyid_low;
unsigned int oui;
struct transceiver_ops* ops = NULL;
+ struct net_local *np = netdev_priv(dev);
+
+ spin_lock(&np->transceiver_lock);
/* Probe MDIO physical address */
for (mdio_phy_addr = 0; mdio_phy_addr <= 31; mdio_phy_addr++) {
@@ -986,7 +880,7 @@
break;
}
if (mdio_phy_addr == 32)
- return -ENODEV;
+ return -ENODEV;
/* Get manufacturer */
phyid_high = e100_get_mdio_reg(dev, mdio_phy_addr, MII_PHYSID1);
@@ -999,6 +893,8 @@
}
transceiver = ops;
+ spin_unlock(&np->transceiver_lock);
+#endif
return 0;
}
@@ -1006,7 +902,7 @@
e100_get_mdio_reg(struct net_device *dev, int phy_id, int location)
{
unsigned short cmd; /* Data to be sent on MDIO port */
- int data; /* Data read from MDIO */
+ int data; /* Data read from MDIO */
int bitCounter;
/* Start of frame, OP Code, Physical Address, Register Address */
@@ -1082,6 +978,7 @@
e100_receive_mdio_bit()
{
unsigned char bit;
+
*R_NETWORK_MGM_CTRL = 0;
bit = IO_EXTRACT(R_NETWORK_STAT, mdio, *R_NETWORK_STAT);
udelay(1);
@@ -1117,7 +1014,7 @@
static void
e100_tx_timeout(struct net_device *dev)
{
- struct net_local *np = (struct net_local *)dev->priv;
+ struct net_local *np = netdev_priv(dev);
unsigned long flags;
spin_lock_irqsave(&np->lock, flags);
@@ -1139,8 +1036,7 @@
e100_reset_transceiver(dev);
/* and get rid of the packets that never got an interrupt */
- while (myFirstTxDesc != myNextTxDesc)
- {
+ while (myFirstTxDesc != myNextTxDesc) {
dev_kfree_skb(myFirstTxDesc->skb);
myFirstTxDesc->skb = 0;
myFirstTxDesc = phys_to_virt(myFirstTxDesc->descr.next);
@@ -1166,7 +1062,7 @@
static int
e100_send_packet(struct sk_buff *skb, struct net_device *dev)
{
- struct net_local *np = (struct net_local *)dev->priv;
+ struct net_local *np = netdev_priv(dev);
unsigned char *buf = skb->data;
unsigned long flags;
@@ -1179,7 +1075,7 @@
dev->trans_start = jiffies;
- e100_hardware_send_packet(buf, skb->len);
+ e100_hardware_send_packet(np, buf, skb->len);
myNextTxDesc = phys_to_virt(myNextTxDesc->descr.next);
@@ -1202,13 +1098,15 @@
e100rxtx_interrupt(int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *)dev_id;
- struct net_local *np = (struct net_local *)dev->priv;
- unsigned long irqbits = *R_IRQ_MASK2_RD;
+ struct net_local *np = netdev_priv(dev);
+ unsigned long irqbits;
- /* Disable RX/TX IRQs to avoid reentrancy */
- *R_IRQ_MASK2_CLR =
- IO_STATE(R_IRQ_MASK2_CLR, dma0_eop, clr) |
- IO_STATE(R_IRQ_MASK2_CLR, dma1_eop, clr);
+ /*
+ * Note that both rx and tx interrupts are blocked at this point,
+ * regardless of which got us here.
+ */
+
+ irqbits = *R_IRQ_MASK2_RD;
/* Handle received packets */
if (irqbits & IO_STATE(R_IRQ_MASK2_RD, dma1_eop, active)) {
@@ -1224,7 +1122,7 @@
* allocate a new buffer to put a packet in.
*/
e100_rx(dev);
- ((struct net_local *)dev->priv)->stats.rx_packets++;
+ np->stats.rx_packets++;
/* restart/continue on the channel, for safety */
*R_DMA_CH1_CMD = IO_STATE(R_DMA_CH1_CMD, cmd, restart);
/* clear dma channel 1 eop/descr irq bits */
@@ -1239,8 +1137,7 @@
/* Report any packets that have been sent */
while (myFirstTxDesc != phys_to_virt(*R_DMA_CH0_FIRST) &&
- myFirstTxDesc != myNextTxDesc)
- {
+ (netif_queue_stopped(dev) || myFirstTxDesc != myNextTxDesc)) {
np->stats.tx_bytes += myFirstTxDesc->skb->len;
np->stats.tx_packets++;
@@ -1249,19 +1146,15 @@
dev_kfree_skb_irq(myFirstTxDesc->skb);
myFirstTxDesc->skb = 0;
myFirstTxDesc = phys_to_virt(myFirstTxDesc->descr.next);
+ /* Wake up queue. */
+ netif_wake_queue(dev);
}
if (irqbits & IO_STATE(R_IRQ_MASK2_RD, dma0_eop, active)) {
- /* acknowledge the eop interrupt and wake up queue */
+ /* acknowledge the eop interrupt. */
*R_DMA_CH0_CLR_INTR = IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do);
- netif_wake_queue(dev);
}
- /* Enable RX/TX IRQs again */
- *R_IRQ_MASK2_SET =
- IO_STATE(R_IRQ_MASK2_SET, dma0_eop, set) |
- IO_STATE(R_IRQ_MASK2_SET, dma1_eop, set);
-
return IRQ_HANDLED;
}
@@ -1269,7 +1162,7 @@
e100nw_interrupt(int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *)dev_id;
- struct net_local *np = (struct net_local *)dev->priv;
+ struct net_local *np = netdev_priv(dev);
unsigned long irqbits = *R_IRQ_MASK0_RD;
/* check for underrun irq */
@@ -1291,7 +1184,6 @@
SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, clr);
*R_NETWORK_TR_CTRL = network_tr_ctrl_shadow;
SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, nop);
- *R_NETWORK_TR_CTRL = IO_STATE(R_NETWORK_TR_CTRL, clr_error, clr);
np->stats.tx_errors++;
D(printk("ethernet excessive collisions!\n"));
}
@@ -1304,12 +1196,13 @@
{
struct sk_buff *skb;
int length = 0;
- struct net_local *np = (struct net_local *)dev->priv;
+ struct net_local *np = netdev_priv(dev);
unsigned char *skb_data_ptr;
#ifdef ETHDEBUG
int i;
#endif
-
+ etrax_eth_descr *prevRxDesc; /* The descriptor right before myNextRxDesc */
+ spin_lock(&np->led_lock);
if (!led_active && time_after(jiffies, led_next_time)) {
/* light the network leds depending on the current speed. */
e100_set_network_leds(NETWORK_ACTIVITY);
@@ -1319,9 +1212,10 @@
led_active = 1;
mod_timer(&clear_led_timer, jiffies + HZ/10);
}
+ spin_unlock(&np->led_lock);
length = myNextRxDesc->descr.hw_len - 4;
- ((struct net_local *)dev->priv)->stats.rx_bytes += length;
+ np->stats.rx_bytes += length;
#ifdef ETHDEBUG
printk("Got a packet of length %d:\n", length);
@@ -1341,7 +1235,7 @@
if (!skb) {
np->stats.rx_errors++;
printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
- return;
+ goto update_nextrxdesc;
}
skb_put(skb, length - ETHER_HEAD_LEN); /* allocate room for the packet body */
@@ -1358,15 +1252,15 @@
else {
/* Large packet, send directly to upper layers and allocate new
* memory (aligned to cache line boundary to avoid bug).
- * Before sending the skb to upper layers we must make sure that
- * skb->data points to the aligned start of the packet.
+ * Before sending the skb to upper layers we must make sure
+ * that skb->data points to the aligned start of the packet.
*/
int align;
struct sk_buff *new_skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES);
if (!new_skb) {
np->stats.rx_errors++;
printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
- return;
+ goto update_nextrxdesc;
}
skb = myNextRxDesc->skb;
align = (int)phys_to_virt(myNextRxDesc->descr.buf) - (int)skb->data;
@@ -1382,9 +1276,10 @@
/* Send the packet to the upper layers */
netif_rx(skb);
+ update_nextrxdesc:
/* Prepare for next packet */
myNextRxDesc->descr.status = 0;
- myPrevRxDesc = myNextRxDesc;
+ prevRxDesc = myNextRxDesc;
myNextRxDesc = phys_to_virt(myNextRxDesc->descr.next);
rx_queue_len++;
@@ -1392,9 +1287,9 @@
/* Check if descriptors should be returned */
if (rx_queue_len == RX_QUEUE_THRESHOLD) {
flush_etrax_cache();
- myPrevRxDesc->descr.ctrl |= d_eol;
+ prevRxDesc->descr.ctrl |= d_eol;
myLastRxDesc->descr.ctrl &= ~d_eol;
- myLastRxDesc = myPrevRxDesc;
+ myLastRxDesc = prevRxDesc;
rx_queue_len = 0;
}
}
@@ -1403,7 +1298,7 @@
static int
e100_close(struct net_device *dev)
{
- struct net_local *np = (struct net_local *)dev->priv;
+ struct net_local *np = netdev_priv(dev);
printk(KERN_INFO "Closing %s.\n", dev->name);
@@ -1431,6 +1326,9 @@
free_irq(NETWORK_DMA_TX_IRQ_NBR, (void *)dev);
free_irq(NETWORK_STATUS_IRQ_NBR, (void *)dev);
+ cris_free_dma(NETWORK_TX_DMA_NBR, cardname);
+ cris_free_dma(NETWORK_RX_DMA_NBR, cardname);
+
/* Update the statistics here. */
update_rx_stats(&np->stats);
@@ -1448,46 +1346,56 @@
{
struct mii_ioctl_data *data = if_mii(ifr);
struct net_local *np = netdev_priv(dev);
+ int ret = 0;
+ int old_autoneg;
spin_lock(&np->lock); /* Preempt protection */
switch (cmd) {
- case SIOCGMIIPHY: /* Get PHY address */
+ case SIOCGMIIPHY: /* Get PHY address */
data->phy_id = mdio_phy_addr;
break;
- case SIOCGMIIREG: /* Read MII register */
+ case SIOCGMIIREG: /* Read MII register */
data->val_out = e100_get_mdio_reg(dev, mdio_phy_addr, data->reg_num);
break;
- case SIOCSMIIREG: /* Write MII register */
+ case SIOCSMIIREG: /* Write MII register */
e100_set_mdio_reg(dev, mdio_phy_addr, data->reg_num, data->val_in);
break;
+
/* The ioctls below should be considered obsolete but are */
/* still present for compatability with old scripts/apps */
- case SET_ETH_SPEED_10: /* 10 Mbps */
+ case SET_ETH_SPEED_10: /* 10 Mbps */
e100_set_speed(dev, 10);
break;
- case SET_ETH_SPEED_100: /* 100 Mbps */
+ case SET_ETH_SPEED_100: /* 100 Mbps */
e100_set_speed(dev, 100);
break;
- case SET_ETH_SPEED_AUTO: /* Auto negotiate speed */
+ case SET_ETH_SPEED_AUTO: /* Auto-negotiate speed */
e100_set_speed(dev, 0);
break;
- case SET_ETH_DUPLEX_HALF: /* Half duplex. */
+ case SET_ETH_DUPLEX_HALF: /* Half duplex */
e100_set_duplex(dev, half);
break;
- case SET_ETH_DUPLEX_FULL: /* Full duplex. */
+ case SET_ETH_DUPLEX_FULL: /* Full duplex */
e100_set_duplex(dev, full);
break;
- case SET_ETH_DUPLEX_AUTO: /* Autonegotiate duplex*/
+ case SET_ETH_DUPLEX_AUTO: /* Auto-negotiate duplex */
e100_set_duplex(dev, autoneg);
break;
+ case SET_ETH_AUTONEG:
+ old_autoneg = autoneg_normal;
+ autoneg_normal = *(int*)data;
+ if (autoneg_normal != old_autoneg)
+ e100_negotiate(dev);
+ break;
default:
+ spin_unlock(&np->lock);
return -EINVAL;
}
spin_unlock(&np->lock);
- return 0;
+ return ret;
}
-static int e100_set_settings(struct net_device *dev,
+static int e100_get_settings(struct net_device *dev,
struct ethtool_cmd *ecmd)
{
ecmd->supported = SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII |
@@ -1565,7 +1473,8 @@
static int
e100_set_config(struct net_device *dev, struct ifmap *map)
{
- struct net_local *np = (struct net_local *)dev->priv;
+ struct net_local *np = netdev_priv(dev);
+
spin_lock(&np->lock); /* Preempt protection */
switch(map->port) {
@@ -1574,21 +1483,25 @@
e100_set_speed(dev, 0);
e100_set_duplex(dev, autoneg);
break;
+
case IF_PORT_10BASET:
e100_set_speed(dev, 10);
e100_set_duplex(dev, autoneg);
break;
+
case IF_PORT_100BASET:
case IF_PORT_100BASETX:
e100_set_speed(dev, 100);
e100_set_duplex(dev, autoneg);
break;
+
case IF_PORT_100BASEFX:
case IF_PORT_10BASE2:
case IF_PORT_AUI:
spin_unlock(&np->lock);
return -EOPNOTSUPP;
break;
+
default:
printk(KERN_ERR "%s: Invalid media selected", dev->name);
spin_unlock(&np->lock);
@@ -1602,6 +1515,7 @@
update_rx_stats(struct net_device_stats *es)
{
unsigned long r = *R_REC_COUNTERS;
+
/* update stats relevant to reception errors */
es->rx_fifo_errors += IO_EXTRACT(R_REC_COUNTERS, congestion, r);
es->rx_crc_errors += IO_EXTRACT(R_REC_COUNTERS, crc_error, r);
@@ -1613,11 +1527,11 @@
update_tx_stats(struct net_device_stats *es)
{
unsigned long r = *R_TR_COUNTERS;
+
/* update stats relevant to transmission errors */
es->collisions +=
IO_EXTRACT(R_TR_COUNTERS, single_col, r) +
IO_EXTRACT(R_TR_COUNTERS, multiple_col, r);
- es->tx_errors += IO_EXTRACT(R_TR_COUNTERS, deferred, r);
}
/*
@@ -1627,8 +1541,9 @@
static struct net_device_stats *
e100_get_stats(struct net_device *dev)
{
- struct net_local *lp = (struct net_local *)dev->priv;
+ struct net_local *lp = netdev_priv(dev);
unsigned long flags;
+
spin_lock_irqsave(&lp->lock, flags);
update_rx_stats(&lp->stats);
@@ -1640,21 +1555,21 @@
/*
* Set or clear the multicast filter for this adaptor.
- * num_addrs == -1 Promiscuous mode, receive all packets
- * num_addrs == 0 Normal mode, clear multicast list
- * num_addrs > 0 Multicast mode, receive normal and MC packets,
- * and do best-effort filtering.
+ * num_addrs == -1 Promiscuous mode, receive all packets
+ * num_addrs == 0 Normal mode, clear multicast list
+ * num_addrs > 0 Multicast mode, receive normal and MC packets,
+ * and do best-effort filtering.
*/
static void
set_multicast_list(struct net_device *dev)
{
- struct net_local *lp = (struct net_local *)dev->priv;
+ struct net_local *lp = netdev_priv(dev);
int num_addr = dev->mc_count;
unsigned long int lo_bits;
unsigned long int hi_bits;
+
spin_lock(&lp->lock);
- if (dev->flags & IFF_PROMISC)
- {
+ if (dev->flags & IFF_PROMISC) {
/* promiscuous mode */
lo_bits = 0xfffffffful;
hi_bits = 0xfffffffful;
@@ -1684,9 +1599,10 @@
struct dev_mc_list *dmi = dev->mc_list;
int i;
char *baddr;
+
lo_bits = 0x00000000ul;
hi_bits = 0x00000000ul;
- for (i=0; i<num_addr; i++) {
+ for (i = 0; i < num_addr; i++) {
/* Calculate the hash index for the GA registers */
hash_ix = 0;
@@ -1713,8 +1629,7 @@
if (hash_ix >= 32) {
hi_bits |= (1 << (hash_ix-32));
- }
- else {
+ } else {
lo_bits |= (1 << hash_ix);
}
dmi = dmi->next;
@@ -1729,10 +1644,11 @@
}
void
-e100_hardware_send_packet(char *buf, int length)
+e100_hardware_send_packet(struct net_local *np, char *buf, int length)
{
D(printk("e100 send pack, buf 0x%x len %d\n", buf, length));
+ spin_lock(&np->led_lock);
if (!led_active && time_after(jiffies, led_next_time)) {
/* light the network leds depending on the current speed. */
e100_set_network_leds(NETWORK_ACTIVITY);
@@ -1742,15 +1658,16 @@
led_active = 1;
mod_timer(&clear_led_timer, jiffies + HZ/10);
}
+ spin_unlock(&np->led_lock);
/* configure the tx dma descriptor */
myNextTxDesc->descr.sw_len = length;
myNextTxDesc->descr.ctrl = d_eop | d_eol | d_wait;
myNextTxDesc->descr.buf = virt_to_phys(buf);
- /* Move end of list */
- myLastTxDesc->descr.ctrl &= ~d_eol;
- myLastTxDesc = myNextTxDesc;
+ /* Move end of list */
+ myLastTxDesc->descr.ctrl &= ~d_eol;
+ myLastTxDesc = myNextTxDesc;
/* Restart DMA channel */
*R_DMA_CH0_CMD = IO_STATE(R_DMA_CH0_CMD, cmd, restart);
@@ -1759,6 +1676,11 @@
static void
e100_clear_network_leds(unsigned long dummy)
{
+ struct net_device *dev = (struct net_device *)dummy;
+ struct net_local *np = netdev_priv(dev);
+
+ spin_lock(&np->led_lock);
+
if (led_active && time_after(jiffies, led_next_time)) {
e100_set_network_leds(NO_NETWORK_ACTIVITY);
@@ -1766,6 +1688,8 @@
led_next_time = jiffies + NET_FLASH_PAUSE;
led_active = 0;
}
+
+ spin_unlock(&np->led_lock);
}
static void
@@ -1786,19 +1710,25 @@
#else
LED_NETWORK_SET(LED_OFF);
#endif
- }
- else if (light_leds) {
+ } else if (light_leds) {
if (current_speed == 10) {
LED_NETWORK_SET(LED_ORANGE);
} else {
LED_NETWORK_SET(LED_GREEN);
}
- }
- else {
+ } else {
LED_NETWORK_SET(LED_OFF);
}
}
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void
+e100_netpoll(struct net_device* netdev)
+{
+ e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev, NULL);
+}
+#endif
+
static int
etrax_init_module(void)
{
diff -urN linux-2.6.19.2.orig/drivers/net/cris/eth_v32.c linux-2.6.19.2.dev/drivers/net/cris/eth_v32.c
--- linux-2.6.19.2.orig/drivers/net/cris/eth_v32.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2.dev/drivers/net/cris/eth_v32.c 2007-02-06 11:10:37.000000000 +0100
@@ -0,0 +1,2305 @@
+/*
+ * Driver for the ETRAX FS network controller.
+ *
+ * Copyright (c) 2003-2006 Axis Communications AB.
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+
+#include <asm/io.h> /* LED_* I/O functions */
+#include <asm/irq.h>
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/dma.h>
+#include <asm/arch/hwregs/eth_defs.h>
+#include <asm/arch/hwregs/config_defs.h>
+#include <asm/arch/hwregs/intr_vect_defs.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+#include <asm/ethernet.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/intmem.h>
+#include <asm/arch/pinmux.h>
+
+#include "eth_v32.h"
+
+#define DEBUG(x)
+#define GET_BIT(bit,val) (((val) >> (bit)) & 0x01)
+
+/* Toggle network LEDs on/off at runtime */
+static int use_network_leds = 1;
+
+static void update_rx_stats(struct crisv32_ethernet_local *np);
+static void update_tx_stats(struct crisv32_ethernet_local *np);
+static void crisv32_eth_setup_controller(struct net_device *dev);
+static int crisv32_eth_request_irqdma(struct net_device *dev);
+static void crisv32_eth_init_rings(struct net_device *dev);
+static void crisv32_eth_reset_rings(struct net_device *dev);
+static void crisv32_ethernet_bug(struct net_device *dev);
+
+/*
+ * The name of the card. Is used for messages and in the requests for
+ * io regions, irqs and dma channels.
+ */
+static const char *cardname = "ETRAX FS built-in ethernet controller";
+
+static int autoneg_normal = 1;
+
+/* Some chipset needs special care. */
+struct transceiver_ops transceivers[] = {
+ {0x1018, broadcom_check_speed, broadcom_check_duplex},
+ /* TDK 2120 and TDK 2120C */
+ {0xC039, tdk_check_speed, tdk_check_duplex},
+ {0x039C, tdk_check_speed, tdk_check_duplex},
+ /* Intel LXT972A*/
+ {0x04de, intel_check_speed, intel_check_duplex},
+ /* National Semiconductor DP83865 */
+ {0x0017, national_check_speed, national_check_duplex},
+ /* Generic, must be last. */
+ {0x0000, generic_check_speed, generic_check_duplex}
+};
+
+static struct net_device *crisv32_dev[2];
+static struct crisv32_eth_leds *crisv32_leds[3];
+
+#ifdef CONFIG_CPU_FREQ
+static int
+crisv32_ethernet_freq_notifier(struct notifier_block *nb, unsigned long val,
+ void *data);
+
+static struct notifier_block crisv32_ethernet_freq_notifier_block = {
+ .notifier_call = crisv32_ethernet_freq_notifier
+};
+#endif
+
+/*
+ * mask in and out tx/rx interrupts.
+ */
+static inline void crisv32_disable_tx_ints(struct crisv32_ethernet_local *np)
+{
+ reg_dma_rw_intr_mask intr_mask_tx = { .data = regk_dma_no };
+ REG_WR(dma, np->dma_out_inst, rw_intr_mask, intr_mask_tx);
+}
+
+static inline void crisv32_enable_tx_ints(struct crisv32_ethernet_local *np)
+{
+ reg_dma_rw_intr_mask intr_mask_tx = { .data = regk_dma_yes };
+ REG_WR(dma, np->dma_out_inst, rw_intr_mask, intr_mask_tx);
+}
+
+static inline void crisv32_disable_rx_ints(struct crisv32_ethernet_local *np)
+{
+ reg_dma_rw_intr_mask intr_mask_rx = { .in_eop = regk_dma_no };
+ REG_WR(dma, np->dma_in_inst, rw_intr_mask, intr_mask_rx);
+}
+
+static inline void crisv32_enable_rx_ints(struct crisv32_ethernet_local *np)
+{
+ reg_dma_rw_intr_mask intr_mask_rx = { .in_eop = regk_dma_yes };
+ REG_WR(dma, np->dma_in_inst, rw_intr_mask, intr_mask_rx);
+}
+
+/* start/stop receiver */
+static inline void crisv32_start_receiver(struct crisv32_ethernet_local *np)
+{
+ reg_eth_rw_rec_ctrl rec_ctrl;
+
+ rec_ctrl = REG_RD(eth, np->eth_inst, rw_rec_ctrl);
+ rec_ctrl.ma0 = regk_eth_yes;
+ rec_ctrl.broadcast = regk_eth_rec;
+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
+}
+
+static inline void crisv32_stop_receiver(struct crisv32_ethernet_local *np)
+{
+ reg_eth_rw_rec_ctrl rec_ctrl;
+
+ rec_ctrl = REG_RD(eth, np->eth_inst, rw_rec_ctrl);
+ rec_ctrl.ma0 = regk_eth_no;
+ rec_ctrl.broadcast = regk_eth_discard;
+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
+}
+
+static int __init
+crisv32_eth_request_irqdma(struct net_device *dev)
+{
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ /* Allocate IRQs and DMAs. */
+ if (np->eth_inst == regi_eth0) {
+ if (request_irq(DMA0_INTR_VECT, crisv32tx_eth_interrupt,
+ 0, cardname, dev)) {
+ return -EAGAIN;
+ }
+
+ if (request_irq(DMA1_INTR_VECT, crisv32rx_eth_interrupt,
+ IRQF_SAMPLE_RANDOM, cardname, dev)) {
+ goto err0_1;
+ }
+
+ if (crisv32_request_dma(0, cardname, DMA_VERBOSE_ON_ERROR,
+ 12500000, dma_eth0))
+ goto err0_2;
+
+ if (crisv32_request_dma(1, cardname, DMA_VERBOSE_ON_ERROR,
+ 12500000, dma_eth0))
+ goto err0_3;
+
+ if (request_irq(ETH0_INTR_VECT, crisv32nw_eth_interrupt, 0,
+ cardname, dev)) {
+ crisv32_free_dma(1);
+ err0_3:
+ crisv32_free_dma(0);
+ err0_2:
+ free_irq(DMA1_INTR_VECT, dev);
+ err0_1:
+ free_irq(DMA0_INTR_VECT, dev);
+ return -EAGAIN;
+ }
+ } else {
+ if (request_irq(DMA6_INTR_VECT, crisv32tx_eth_interrupt,
+ 0, cardname, dev))
+ return -EAGAIN;
+
+ if (request_irq(DMA7_INTR_VECT, crisv32rx_eth_interrupt,
+ IRQF_SAMPLE_RANDOM, cardname, dev))
+ goto err1_1;
+
+ if (crisv32_request_dma(6, cardname, DMA_VERBOSE_ON_ERROR,
+ 0, dma_eth1))
+ goto err1_2;
+
+ if (crisv32_request_dma(7, cardname, DMA_VERBOSE_ON_ERROR,
+ 0, dma_eth1))
+ goto err1_3;
+
+ if (request_irq(ETH1_INTR_VECT, crisv32nw_eth_interrupt, 0,
+ cardname, dev)) {
+ crisv32_free_dma(7);
+ err1_3:
+ crisv32_free_dma(6);
+ err1_2:
+ free_irq(DMA7_INTR_VECT, dev);
+ err1_1:
+ free_irq(DMA6_INTR_VECT, dev);
+ return -EAGAIN;
+ }
+ }
+ return 0;
+}
+
+static void __init
+crisv32_eth_setup_controller(struct net_device *dev)
+{
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ reg_config_rw_pad_ctrl pad_ctrl;
+
+ reg_eth_rw_tr_ctrl tr_ctrl = {
+ .retry = regk_eth_yes,
+ .pad = regk_eth_yes,
+ .crc = regk_eth_yes
+ };
+
+ reg_eth_rw_rec_ctrl rec_ctrl = {
+ .ma0 = regk_eth_no, /* enable at open() */
+ .broadcast = regk_eth_no,
+ .max_size = regk_eth_size1522
+ };
+
+ reg_eth_rw_ga_lo ga_lo = { 0 };
+ reg_eth_rw_ga_hi ga_hi = { 0 };
+
+ reg_eth_rw_gen_ctrl gen_ctrl = {
+ .phy = regk_eth_mii_clk,
+ .flow_ctrl = regk_eth_yes
+ };
+
+ /*
+ * Initialize group address registers to make sure that no
+ * unwanted addresses are matched.
+ */
+ REG_WR(eth, np->eth_inst, rw_ga_lo, ga_lo);
+ REG_WR(eth, np->eth_inst, rw_ga_hi, ga_hi);
+
+ /* Configure receiver and transmitter */
+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
+ REG_WR(eth, np->eth_inst, rw_tr_ctrl, tr_ctrl);
+
+ /* Enable ethernet controller with mii clk. */
+ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl);
+ gen_ctrl.en = regk_eth_yes;
+ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl);
+
+ /* keep reset low (RESET_LEN) */
+ udelay(500);
+
+ /* done */
+ pad_ctrl = REG_RD(config, regi_config, rw_pad_ctrl);
+ pad_ctrl.phyrst_n = 1;
+ REG_WR(config, regi_config, rw_pad_ctrl, pad_ctrl);
+
+ /* Let the PHY reset (RESET_WAIT) */
+ udelay(200);
+
+ crisv32_eth_probe_transceiver(dev);
+}
+
+static void __init
+crisv32_eth_init_rings(struct net_device *dev)
+{
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+ int i;
+
+ /* Initialise receive descriptors for interface. */
+ for (i = 0; i < NBR_RX_DESC; i++) {
+ struct sk_buff *skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE);
+
+ np->dma_rx_descr_list[i].skb = skb;
+ np->dma_rx_descr_list[i].descr.buf =
+ (char*)virt_to_phys(skb->data);
+ np->dma_rx_descr_list[i].descr.after =
+ (char*)virt_to_phys(skb->data + MAX_MEDIA_DATA_SIZE);
+
+ np->dma_rx_descr_list[i].descr.eol = 0;
+ np->dma_rx_descr_list[i].descr.in_eop = 0;
+ np->dma_rx_descr_list[i].descr.next =
+ (void *) virt_to_phys(&np->dma_rx_descr_list[i + 1].descr);
+ }
+ /* bend the list into a ring */
+ np->dma_rx_descr_list[NBR_RX_DESC - 1].descr.next =
+ (void *) virt_to_phys(&np->dma_rx_descr_list[0].descr);
+
+ /* Initialize transmit descriptors. */
+ for (i = 0; i < NBR_TX_DESC; i++) {
+ np->dma_tx_descr_list[i].descr.wait = 1;
+ np->dma_tx_descr_list[i].descr.eol = 0;
+ np->dma_tx_descr_list[i].descr.out_eop = 0;
+ np->dma_tx_descr_list[i].descr.next =
+ (void*)virt_to_phys(&np->dma_tx_descr_list[i+1].descr);
+ }
+ /* bend the list into a ring */
+ np->dma_tx_descr_list[NBR_TX_DESC - 1].descr.next =
+ (void *) virt_to_phys(&np->dma_tx_descr_list[0].descr);
+
+ crisv32_eth_reset_rings(dev);
+}
+
+static void
+crisv32_eth_reset_rings(struct net_device *dev)
+{
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+ int i;
+
+ /* free un-handled tx packets */
+ while(np->txpackets
+ || np->catch_tx_desc != np->active_tx_desc) {
+ np->txpackets--;
+ if (np->catch_tx_desc->skb)
+ dev_kfree_skb(np->catch_tx_desc->skb);
+
+ np->catch_tx_desc->skb = 0;
+ np->catch_tx_desc =
+ phys_to_virt((int)np->catch_tx_desc->descr.next);
+ } while (np->catch_tx_desc != np->active_tx_desc);
+ WARN_ON(np->txpackets != 0);
+ np->txpackets = 0;
+
+ /* cleanup the rx-ring */
+ for (i = 0; i < NBR_RX_DESC; i++) {
+ struct sk_buff *skb;
+ skb = np->dma_rx_descr_list[i].skb;
+ if (!skb
+ || (np->dma_rx_descr_list[i].descr.buf !=
+ (void *)virt_to_phys(skb->data)))
+ {
+ printk("%s:%d: damaged rx-ring! "
+ "i=%d skb=%p %lx %lx %p %p\n",
+ __func__, __LINE__, i,
+ skb,
+ virt_to_phys(skb->data),
+ virt_to_phys(skb->data + MAX_MEDIA_DATA_SIZE),
+ np->dma_rx_descr_list[i].descr.buf,
+ np->dma_rx_descr_list[i].descr.after);
+ WARN_ON(1);
+ crisv32_ethernet_bug(dev);
+ if (skb)
+ dev_kfree_skb(skb);
+ skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE);
+ np->dma_rx_descr_list[i].skb = skb;
+ np->dma_rx_descr_list[i].descr.buf =
+ (char*)virt_to_phys(skb->data);
+ }
+ np->dma_rx_descr_list[i].descr.after =
+ (char*)virt_to_phys(skb->data
+ + MAX_MEDIA_DATA_SIZE);
+ np->dma_rx_descr_list[i].descr.eol = 0;
+ np->dma_rx_descr_list[i].descr.in_eop = 0;
+ /* Workaround cache bug */
+ flush_dma_descr(&np->dma_rx_descr_list[i].descr, 1);
+ }
+
+ /* reset rx-ring */
+ np->active_rx_desc = &np->dma_rx_descr_list[0];
+ np->prev_rx_desc = &np->dma_rx_descr_list[NBR_RX_DESC - 1];
+ np->last_rx_desc = np->prev_rx_desc;
+ np->dma_rx_descr_list[NBR_RX_DESC - 1].descr.eol = 1;
+
+ /* reset tx-ring */
+ np->dma_tx_descr_list[0].descr.buf =
+ np->dma_tx_descr_list[0].descr.after = 0;
+ np->dma_rx_descr_list[i].descr.in_eop = 0;
+ np->dma_tx_descr_list[0].descr.eol = 1;
+
+ np->active_tx_desc = &np->dma_tx_descr_list[0];
+ np->prev_tx_desc = &np->dma_tx_descr_list[NBR_TX_DESC - 1];
+ np->catch_tx_desc = &np->dma_tx_descr_list[0];
+
+ /* Fill context descriptors. */
+ np->ctxt_in.next = 0;
+ np->ctxt_in.saved_data =
+ (void *)virt_to_phys(&np->active_rx_desc->descr);
+ np->ctxt_in.saved_data_buf = np->active_rx_desc->descr.buf;
+
+ np->ctxt_out.next = 0;
+ np->ctxt_out.saved_data =
+ (void *)virt_to_phys(&np->dma_tx_descr_list[0].descr);
+}
+
+static void __init
+crisv32_init_leds(int ledgrp, struct net_device* dev)
+{
+ struct timer_list timer_init = TIMER_INITIALIZER(NULL, 0, 0);
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ /* Use already allocated led grp if initialized */
+ if (crisv32_leds[ledgrp] != NULL) {
+ np->leds = crisv32_leds[ledgrp];
+ return;
+ }
+
+ crisv32_leds[ledgrp] = kmalloc(sizeof(struct crisv32_eth_leds),GFP_KERNEL);
+
+ crisv32_leds[ledgrp]->ledgrp = ledgrp;
+ crisv32_leds[ledgrp]->led_active = 0;
+ /* NOTE: Should this value be set to zero as the jiffies timer can wrap? */
+ crisv32_leds[ledgrp]->led_next_time = jiffies;
+
+ crisv32_leds[ledgrp]->clear_led_timer = timer_init;
+ crisv32_leds[ledgrp]->clear_led_timer.function = crisv32_clear_network_leds;
+ crisv32_leds[ledgrp]->clear_led_timer.data = (unsigned long) dev;
+
+ spin_lock_init(&crisv32_leds[ledgrp]->led_lock);
+
+ np->leds = crisv32_leds[ledgrp];
+}
+
+static int __init
+crisv32_ethernet_init(void)
+{
+ struct crisv32_ethernet_local *np;
+ int ret = 0;
+
+ printk("ETRAX FS 10/100MBit ethernet v0.01 (c)"
+ " 2003 Axis Communications AB\n");
+
+#ifdef CONFIG_ETRAX_ETHERNET_IFACE0
+{
+ int iface0 = 0;
+ /* Default MAC address for interface 0.
+ * The real one will be set later. */
+ static struct sockaddr default_mac_iface0 =
+ {0, {0x00, 0x40, 0x8C, 0xCD, 0x00, 0x00}};
+
+ if (!(crisv32_dev[iface0] = alloc_etherdev(sizeof *np)))
+ return -ENOMEM;
+
+ ret |= crisv32_ethernet_device_init(crisv32_dev[iface0]);
+
+#if defined(CONFIG_ETRAX_ETH0_USE_LEDGRP0)
+ crisv32_init_leds(LED_GRP_0,crisv32_dev[iface0]);
+#elif defined(CONFIG_ETRAX_ETH0_USE_LEDGRP1)
+ crisv32_init_leds(LED_GRP_1,crisv32_dev[iface0]);
+#else
+ crisv32_init_leds(LED_GRP_NONE,crisv32_dev[iface0]);
+#endif
+
+ np = (struct crisv32_ethernet_local *) crisv32_dev[iface0]->priv;
+ np->eth_inst = regi_eth0;
+ np->dma_out_inst = regi_dma0;
+ np->dma_in_inst = regi_dma1;
+
+ register_netdev(crisv32_dev[iface0]);
+
+ /* Set up default MAC address */
+ memcpy(crisv32_dev[iface0]->dev_addr, default_mac_iface0.sa_data, 6);
+ crisv32_eth_set_mac_address(crisv32_dev[iface0], &default_mac_iface0);
+ if (crisv32_eth_request_irqdma(crisv32_dev[iface0]))
+ printk("%s: eth0 unable to allocate IRQ and DMA resources\n",
+ __func__);
+ np->txpackets = 0;
+ crisv32_eth_init_rings(crisv32_dev[iface0]);
+ crisv32_eth_setup_controller(crisv32_dev[iface0]);
+}
+#endif /* CONFIG_ETRAX_ETHERNET_IFACE0 */
+
+#ifdef CONFIG_ETRAX_ETHERNET_IFACE1
+{
+ int iface1 = 0;
+ /* Default MAC address for interface 1.
+ * The real one will be set later. */
+ static struct sockaddr default_mac_iface1 =
+ {0, {0x00, 0x40, 0x8C, 0xCD, 0x00, 0x01}};
+
+ if (crisv32_pinmux_alloc_fixed(pinmux_eth1))
+ panic("Eth pinmux\n");
+
+ /* Increase index to device array if interface 0 is enabled as well.*/
+#ifdef CONFIG_ETRAX_ETHERNET_IFACE0
+ iface1++;
+#endif
+ if (!(crisv32_dev[iface1] = alloc_etherdev(sizeof *np)))
+ return -ENOMEM;
+
+ ret |= crisv32_ethernet_device_init(crisv32_dev[iface1]);
+
+#if defined(CONFIG_ETRAX_ETH1_USE_LEDGRP0)
+ crisv32_init_leds(LED_GRP_0,crisv32_dev[iface1]);
+#elif defined(CONFIG_ETRAX_ETH1_USE_LEDGRP1)
+ crisv32_init_leds(LED_GRP_1,crisv32_dev[iface1]);
+#else
+ crisv32_init_leds(LED_GRP_NONE,crisv32_dev[iface1]);
+#endif
+
+ np = (struct crisv32_ethernet_local *) crisv32_dev[iface1]->priv;
+ np->eth_inst = regi_eth1;
+ np->dma_out_inst = regi_dma6;
+ np->dma_in_inst = regi_dma7;
+
+ register_netdev(crisv32_dev[iface1]);
+
+ /* Set up default MAC address */
+ memcpy(crisv32_dev[iface1]->dev_addr, default_mac_iface1.sa_data, 6);
+ crisv32_eth_set_mac_address(crisv32_dev[iface1], &default_mac_iface1);
+
+ if (crisv32_eth_request_irqdma(crisv32_dev[iface1]))
+ printk("%s: eth1 unable to allocate IRQ and DMA resources\n",
+ __func__);
+ np->txpackets = 0;
+ crisv32_eth_init_rings(crisv32_dev[iface1]);
+ crisv32_eth_setup_controller(crisv32_dev[iface1]);
+}
+#endif /* CONFIG_ETRAX_ETHERNET_IFACE1 */
+
+#ifdef CONFIG_CPU_FREQ
+ cpufreq_register_notifier(&crisv32_ethernet_freq_notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER);
+#endif
+
+ return ret;
+}
+
+static int __init
+crisv32_ethernet_device_init(struct net_device* dev)
+{
+ struct timer_list timer_init = TIMER_INITIALIZER(NULL, 0, 0);
+ struct crisv32_ethernet_local *np;
+
+ dev->base_addr = 0; /* Just to have something to show. */
+
+ /* we do our own locking */
+ dev->features |= NETIF_F_LLTX;
+
+ /* We use several IRQs and DMAs so just report 0 here. */
+ dev->irq = 0;
+ dev->dma = 0;
+
+ /*
+ * Fill in our handlers so the network layer can talk to us in the
+ * future.
+ */
+ dev->open = crisv32_eth_open;
+ dev->hard_start_xmit = crisv32_eth_send_packet;
+ dev->stop = crisv32_eth_close;
+ dev->get_stats = crisv32_get_stats;
+ dev->set_multicast_list = crisv32_eth_set_multicast_list;
+ dev->set_mac_address = crisv32_eth_set_mac_address;
+ dev->ethtool_ops = &crisv32_ethtool_ops;
+ dev->do_ioctl = crisv32_eth_ioctl;
+ dev->set_config = crisv32_eth_set_config;
+ dev->tx_timeout = crisv32_eth_tx_timeout;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = crisv32_netpoll;
+#endif
+
+ np = netdev_priv(dev);
+
+ spin_lock_init(&np->lock);
+ spin_lock_init(&np->transceiver_lock);
+
+ /* Initialize speed indicator stuff. */
+ np->current_speed = 10;
+ np->current_speed_selection = 0; /* Auto. */
+ np->speed_timer = timer_init;
+ np->speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL;
+ np->speed_timer.data = (unsigned long) dev;
+ np->speed_timer.function = crisv32_eth_check_speed;
+
+ np->full_duplex = 0;
+ np->current_duplex = autoneg;
+ np->duplex_timer = timer_init;
+ np->duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL;
+ np->duplex_timer.data = (unsigned long) dev;
+ np->duplex_timer.function = crisv32_eth_check_duplex;
+
+ return 0;
+}
+
+static int
+crisv32_eth_open(struct net_device *dev)
+{
+ struct sockaddr mac_addr;
+ reg_dma_rw_ack_intr ack_intr = { .data = 1,.in_eop = 1 };
+ reg_dma_rw_cfg dma_cfg = { .en = 1 };
+ reg_eth_rw_clr_err clr_err = {.clr = regk_eth_yes};
+ int intr_mask_nw = 0x1cff;
+ int eth_ack_intr = 0xffff;
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ spin_lock(&np->lock);
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+ np->gigabit_mode = 0;
+#endif
+ crisv32_disable_tx_ints(np);
+ crisv32_disable_rx_ints(np);
+
+ REG_WR(eth, np->eth_inst, rw_clr_err, clr_err);
+ REG_WR_INT(eth, np->eth_inst, rw_ack_intr, eth_ack_intr);
+ REG_WR_INT(eth, np->eth_inst, rw_intr_mask, intr_mask_nw);
+ crisv32_eth_reset_rings(dev);
+
+ /* Give the hardware an idea of what MAC address we want. */
+ memcpy(mac_addr.sa_data, dev->dev_addr, dev->addr_len);
+ crisv32_eth_set_mac_address(dev, &mac_addr);
+
+ /* Enable irq and make sure that the irqs are cleared. */
+ REG_WR(dma, np->dma_out_inst, rw_ack_intr, ack_intr);
+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr);
+
+ /* Prepare input DMA. */
+ DMA_RESET(np->dma_in_inst);
+ DMA_ENABLE(np->dma_in_inst);
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+ DMA_WR_CMD(np->dma_in_inst, regk_dma_set_w_size2);
+#endif
+ DMA_START_CONTEXT( np->dma_in_inst, virt_to_phys(&np->ctxt_in));
+ DMA_CONTINUE(np->dma_in_inst);
+ crisv32_enable_rx_ints(np);
+ crisv32_start_receiver(np);
+
+ /* Prepare output DMA. */
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+ DMA_WR_CMD(np->dma_out_inst, regk_dma_set_w_size4);
+#endif
+ REG_WR(dma, np->dma_out_inst, rw_cfg, dma_cfg);
+ netif_start_queue(dev);
+ crisv32_enable_tx_ints(np);
+
+ /* Start duplex/speed timers */
+ add_timer(&np->speed_timer);
+ add_timer(&np->duplex_timer);
+
+ spin_unlock(&np->lock);
+ /*
+ * We are now ready to accept transmit requeusts from the queueing
+ * layer of the networking.
+ */
+ netif_carrier_on(dev);
+
+ return 0;
+}
+
+static int
+crisv32_eth_close(struct net_device *dev)
+{
+ reg_dma_rw_ack_intr ack_intr = {0};
+
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+ unsigned long flags;
+
+ printk(KERN_INFO "Closing %s.\n", dev->name);
+
+ /* stop the receiver before the DMA channels to avoid overruns. */
+ crisv32_stop_receiver(np);
+
+ spin_lock_irqsave(&np->lock, flags);
+ netif_stop_queue(dev);
+
+ /* Reset the TX DMA in case it has hung on something. */
+ DMA_RESET(np->dma_in_inst);
+
+ /* Stop DMA */
+ DMA_STOP(np->dma_in_inst);
+ DMA_STOP(np->dma_out_inst);
+
+ /* Disable irq and make sure that the irqs are cleared. */
+ crisv32_disable_tx_ints(np);
+ ack_intr.data = 1;
+ REG_WR(dma, np->dma_out_inst, rw_ack_intr, ack_intr);
+
+ crisv32_disable_rx_ints(np);
+ ack_intr.in_eop = 1;
+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr);
+
+ np->sender_started = 0;
+ spin_unlock_irqrestore(&np->lock, flags);
+
+ /* Update the statistics. */
+ update_rx_stats(np);
+ update_tx_stats(np);
+
+ /* Stop speed/duplex timers */
+ del_timer(&np->speed_timer);
+ del_timer(&np->duplex_timer);
+
+ return 0;
+}
+
+static int
+crisv32_eth_set_mac_address(struct net_device *dev, void *vpntr)
+{
+ int i;
+ unsigned char *addr = ((struct sockaddr*)vpntr)->sa_data;
+
+ reg_eth_rw_ma0_lo ma0_lo =
+ { addr[0] | (addr[1] << 8) | (addr[2] << 16) | (addr[3] << 24)};
+
+ reg_eth_rw_ma0_hi ma0_hi = { addr[4] | (addr[5] << 8) };
+
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ /* Remember the address. */
+ memcpy(dev->dev_addr, addr, dev->addr_len);
+
+ /*
+ * Write the address to the hardware.
+ * Note the way the address is wrapped:
+ * ma0_l0 = a0_0 | (a0_1 << 8) | (a0_2 << 16) | (a0_3 << 24);
+ * ma0_hi = a0_4 | (a0_5 << 8);
+ */
+ REG_WR(eth, np->eth_inst, rw_ma0_lo, ma0_lo);
+ REG_WR(eth, np->eth_inst, rw_ma0_hi, ma0_hi);
+
+ printk(KERN_INFO "%s: changed MAC to ", dev->name);
+
+ for (i = 0; i < 5; i++)
+ printk("%02X:", dev->dev_addr[i]);
+
+ printk("%02X\n", dev->dev_addr[i]);
+
+ return 0;
+}
+
+static irqreturn_t
+crisv32rx_eth_interrupt(int irq, void *dev_id)
+{
+ reg_dma_r_masked_intr masked_in;
+ reg_dma_rw_cmd cmd = {0};
+ reg_dma_rw_ack_intr ack_intr = {0};
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ masked_in = REG_RD(dma, np->dma_in_inst, r_masked_intr);
+
+ if (masked_in.in_eop) {
+ DEBUG(printk("EOP_IN interrupt\n"));
+
+ /* Acknowledge input dma interrupt. */
+ ack_intr.in_eop = 1;
+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr);
+
+ np->new_rx_package = 1;
+ /* Check if complete packets were indeed received. */
+ while (np->active_rx_desc->descr.in_eop == 1
+ && np->new_rx_package) {
+ /*
+ * Take out the buffer and give it to the OS, then
+ * allocate a new buffer to put a packet in.
+ */
+ crisv32_eth_receive_packet(dev);
+
+ /* Update number of packets received. */
+ np->stats.rx_packets++;
+
+ /* Restarts input dma. */
+ cmd.cont_data = 1;
+ REG_WR(dma, np->dma_in_inst, rw_cmd, cmd);
+
+ /* Acknowledge input dma interrupt. */
+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr);
+ }
+ }
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+crisv32tx_eth_interrupt(int irq, void *dev_id)
+{
+ reg_dma_rw_stat stat;
+ dma_descr_data *dma_pos;
+ reg_dma_rw_ack_intr ack_intr = { .data = 1 };
+ reg_dma_r_masked_intr masked_out;
+
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+ unsigned long flags;
+
+ masked_out = REG_RD(dma, np->dma_out_inst, r_masked_intr);
+
+ /* Get the current output dma position. */
+ stat = REG_RD(dma, np->dma_out_inst, rw_stat);
+ if (stat.list_state == regk_dma_data_at_eol)
+ dma_pos = &np->active_tx_desc->descr;
+ else
+ dma_pos = phys_to_virt(REG_RD_INT(dma, np->dma_out_inst,
+ rw_data));
+
+ /* ack the interrupt */
+ REG_WR(dma, np->dma_out_inst, rw_ack_intr, ack_intr);
+
+ /* protect against ethernet excessive-col interrupts */
+ spin_lock_irqsave(&np->lock, flags);
+
+ /* Take care of transmited dma descriptors and report sent packet. */
+ while (np->txpackets && ((&np->catch_tx_desc->descr != dma_pos)
+ || netif_queue_stopped(dev))) {
+ /* Update sent packet statistics. */
+ np->stats.tx_bytes += np->catch_tx_desc->skb->len;
+ np->stats.tx_packets++;
+
+ dev_kfree_skb_irq(np->catch_tx_desc->skb);
+ np->catch_tx_desc->skb = 0;
+ np->txpackets--;
+ np->catch_tx_desc =
+ phys_to_virt((int)np->catch_tx_desc->descr.next);
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+ if (np->gigabit_mode) {
+ np->intmem_tx_buf_catch->free = 1;
+ np->intmem_tx_buf_catch = np->intmem_tx_buf_catch->next;
+ }
+#endif
+ netif_wake_queue(dev);
+ }
+ spin_unlock_irqrestore(&np->lock, flags);
+ return IRQ_HANDLED;
+}
+
+
+/* Update receive errors. */
+static void
+update_rx_stats(struct crisv32_ethernet_local *np)
+{
+ reg_eth_rs_rec_cnt r;
+ reg_eth_rs_phy_cnt rp;
+
+ r = REG_RD(eth, np->eth_inst, rs_rec_cnt);
+ rp = REG_RD(eth, np->eth_inst, rs_phy_cnt);
+
+ np->stats.rx_fifo_errors += r.congestion;
+ np->stats.rx_crc_errors += r.crc_err;
+ np->stats.rx_frame_errors += r.align_err;
+ np->stats.rx_length_errors += r.oversize;
+}
+
+/* Update transmit errors. */
+static void
+update_tx_stats(struct crisv32_ethernet_local *np)
+{
+ reg_eth_rs_tr_cnt r;
+
+ r = REG_RD(eth, np->eth_inst, rs_tr_cnt);
+
+ np->stats.collisions += r.single_col + r.mult_col;
+ np->stats.tx_errors += r.deferred;
+}
+
+/* Get current statistics. */
+static struct net_device_stats *
+crisv32_get_stats(struct net_device *dev)
+{
+ unsigned long flags;
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ spin_lock_irqsave(&np->lock, flags);
+
+ update_rx_stats(np);
+ update_tx_stats(np);
+
+ spin_unlock_irqrestore(&np->lock, flags);
+
+ return &np->stats;
+}
+
+/* Check for network errors. This acknowledge the received interrupt. */
+static irqreturn_t
+crisv32nw_eth_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+ reg_eth_r_masked_intr intr_mask;
+ int ack_intr = 0xffff;
+ reg_eth_rw_clr_err clr_err;
+
+ intr_mask = REG_RD(eth, np->eth_inst, r_masked_intr);
+
+ /*
+ * Check for underrun and/or excessive collisions. Note that the
+ * rw_clr_err register clears both underrun and excessive collision
+ * errors, so there's no need to check them separately.
+ */
+ if (np->sender_started
+ && (intr_mask.urun || intr_mask.exc_col)) {
+ unsigned long flags;
+ dma_descr_data *dma_pos;
+ reg_dma_rw_stat stat;
+
+ /* Get the current output dma position. */
+ stat = REG_RD(dma, np->dma_out_inst, rw_stat);
+ if (stat.list_state == regk_dma_data_at_eol)
+ dma_pos = &np->active_tx_desc->descr;
+ else
+ dma_pos = phys_to_virt(REG_RD_INT(dma,
+ np->dma_out_inst,
+ rw_data));
+
+ /*
+ * Protect against the tx-interrupt messing with
+ * the tx-ring.
+ */
+ spin_lock_irqsave(&np->lock, flags);
+ /*
+ * If we have more than one packet in the tx-ring
+ * drop one and move ahead. Upper layers rely on
+ * packeloss when doing congestion control.
+ */
+ if (intr_mask.exc_col && np->txpackets > 1) {
+ dev_kfree_skb_irq(np->catch_tx_desc->skb);
+ np->catch_tx_desc->skb = 0;
+ np->catch_tx_desc =
+ phys_to_virt((int)
+ np->catch_tx_desc->descr.next);
+ np->txpackets--;
+ netif_wake_queue(dev);
+ }
+ np->ctxt_out.next = 0;
+ if (np->txpackets) {
+ np->ctxt_out.saved_data = (void *)
+ virt_to_phys(&np->catch_tx_desc->descr);
+ np->ctxt_out.saved_data_buf =
+ np->catch_tx_desc->descr.buf;
+
+ /* restart the DMA */
+ DMA_START_CONTEXT(np->dma_out_inst,
+ (int) virt_to_phys(&np->ctxt_out));
+ }
+ else {
+ /* let the next packet restart the DMA */
+ np->ctxt_out.saved_data = (void *)
+ virt_to_phys(&np->active_tx_desc->descr);
+ np->sender_started = 0;
+ }
+
+ spin_unlock_irqrestore(&np->lock, flags);
+ np->stats.tx_errors++;
+ }
+
+ REG_WR_INT(eth, np->eth_inst, rw_ack_intr, ack_intr);
+ clr_err.clr = 1;
+ REG_WR(eth, np->eth_inst, rw_clr_err, clr_err);
+
+ update_rx_stats(np);
+ update_tx_stats(np);
+
+ return IRQ_HANDLED;
+}
+
+/* We have a good packet(s), get it/them out of the buffers. */
+static void
+crisv32_eth_receive_packet(struct net_device *dev)
+{
+ int length;
+ struct sk_buff *skb;
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+ struct sk_buff *tmp;
+ unsigned long flags;
+
+ DEBUG(printk("crisv32_receive_packet\n"));
+
+ /* Activate LED */
+ spin_lock_irqsave(&np->leds->led_lock, flags);
+ if (!np->leds->led_active && time_after(jiffies, np->leds->led_next_time)) {
+ /* light the network leds depending on the current speed. */
+ crisv32_set_network_leds(LED_ACTIVITY, dev);
+
+ /* Set the earliest time we may clear the LED */
+ np->leds->led_next_time = jiffies + NET_FLASH_TIME;
+ np->leds->led_active = 1;
+ np->leds->clear_led_timer.data = (unsigned long) dev;
+ mod_timer(&np->leds->clear_led_timer, jiffies + HZ/10);
+ }
+ spin_unlock_irqrestore(&np->leds->led_lock, flags);
+
+ /* Discard CRC (4 bytes). */
+ length = (np->active_rx_desc->descr.after) -
+ (np->active_rx_desc->descr.buf) - 4;
+
+ /* Update received packet statistics. */
+ np->stats.rx_bytes += length;
+
+ if (np->active_rx_desc != np->last_rx_desc) {
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+ if (np->gigabit_mode) {
+ skb = dev_alloc_skb(length);
+ if(!skb) {
+ np->stats.rx_errors++;
+ printk(KERN_NOTICE "%s: memory squeeze,"
+ " dropping packet.", dev->name);
+ return;
+ }
+ /* Allocate room for the packet body. */
+ skb_put(skb, length - ETHER_HEAD_LEN);
+ /* Allocate room for the header and copy the data to
+ * the SKB */
+ memcpy(skb_push(skb, ETHER_HEAD_LEN),
+ crisv32_intmem_phys_to_virt((unsigned long)np->active_rx_desc->descr.buf), length);
+ skb->dev = dev;
+ skb->protocol = eth_type_trans(skb, dev);
+ skb->ip_summed = CHECKSUM_NONE;
+ /* Send the packet to the upper layer. */
+ netif_rx(skb);
+ np->last_rx_desc =
+ (void *) phys_to_virt(np->last_rx_desc->descr.next);
+ } else {
+#endif
+ tmp = dev_alloc_skb(MAX_MEDIA_DATA_SIZE);
+ if (!tmp) {
+ np->stats.rx_errors++;
+ printk(KERN_NOTICE "%s: memory squeeze,"
+ " dropping packet.",
+ dev->name);
+ return;
+ }
+ skb = np->active_rx_desc->skb;
+ np->active_rx_desc->skb = tmp;
+ skb_put(skb, length);
+
+ np->active_rx_desc->descr.buf =
+ (void *) virt_to_phys(np->active_rx_desc->skb->data);
+ np->active_rx_desc->descr.after =
+ np->active_rx_desc->descr.buf + MAX_MEDIA_DATA_SIZE;
+
+ skb->dev = dev;
+ skb->protocol = eth_type_trans(skb, dev);
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* Send the packet to the upper layer. */
+ netif_rx(skb);
+ np->last_rx_desc =
+ phys_to_virt((int)
+ np->last_rx_desc->descr.next);
+ }
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+ }
+#endif
+ /*
+ * When the input DMA reaches eol precaution must be taken, otherwise
+ * the DMA could stop. The problem occurs if the eol flag is re-placed
+ * on the descriptor that the DMA stands on before the DMA proceed to
+ * the next descriptor. This case could, for example, happen if there
+ * is a traffic burst and then the network goes silent. To prevent this
+ * we make sure that we do not set the eol flag on the descriptor that
+ * the DMA stands on.
+ */
+ if(virt_to_phys(&np->active_rx_desc->descr) !=
+ REG_RD_INT(dma, np->dma_in_inst, rw_saved_data)) {
+ np->active_rx_desc->descr.after =
+ np->active_rx_desc->descr.buf + MAX_MEDIA_DATA_SIZE;
+ np->active_rx_desc->descr.eol = 1;
+ np->active_rx_desc->descr.in_eop = 0;
+ np->active_rx_desc =
+ phys_to_virt((int)np->active_rx_desc->descr.next);
+ barrier();
+ np->prev_rx_desc->descr.eol = 0;
+ flush_dma_descr(&np->prev_rx_desc->descr, 0); // Workaround cache bug
+ np->prev_rx_desc =
+ phys_to_virt((int)np->prev_rx_desc->descr.next);
+ flush_dma_descr(&np->prev_rx_desc->descr, 1); // Workaround cache bug
+ } else {
+ np->new_rx_package = 0;
+ }
+}
+
+/*
+ * This function (i.e. hard_start_xmit) is protected from concurent calls by a
+ * spinlock (xmit_lock) in the net_device structure.
+ */
+static int
+crisv32_eth_send_packet(struct sk_buff *skb, struct net_device *dev)
+{
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+ unsigned char *buf = skb->data;
+ unsigned long flags;
+
+ dev->trans_start = jiffies;
+
+ spin_lock_irqsave(&np->leds->led_lock, flags);
+ if (!np->leds->led_active && time_after(jiffies, np->leds->led_next_time)) {
+ /* light the network leds depending on the current speed. */
+ crisv32_set_network_leds(LED_ACTIVITY, dev);
+
+ /* Set the earliest time we may clear the LED */
+ np->leds->led_next_time = jiffies + NET_FLASH_TIME;
+ np->leds->led_active = 1;
+ np->leds->clear_led_timer.data = (unsigned long) dev;
+ mod_timer(&np->leds->clear_led_timer, jiffies + HZ/10);
+ }
+ spin_unlock_irqrestore(&np->leds->led_lock, flags);
+
+ /*
+ * Need to disable irq to avoid updating pointer in interrupt while
+ * sending packets.
+ */
+ spin_lock_irqsave(&np->lock, flags);
+
+ np->active_tx_desc->skb = skb;
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+ if (np->gigabit_mode) {
+ if(np->intmem_tx_buf_active->free) {
+ memcpy(np->intmem_tx_buf_active->buf,
+ skb->data, skb->len);
+ np->intmem_tx_buf_active->free = 0;
+ crisv32_eth_hw_send_packet(
+ np->intmem_tx_buf_active->buf, skb->len, np);
+ np->intmem_tx_buf_active =
+ np->intmem_tx_buf_active->next;
+ } else {
+ printk("%s: Internal tx memory buffer not free!\n\r",
+ __FILE__);
+ spin_unlock_irqrestore(&np->lock, flags);
+ return 1;
+ }
+ }
+ else
+#endif
+ {
+ crisv32_eth_hw_send_packet(buf, skb->len, np);
+ }
+ /* Stop queue if full. */
+ if (np->active_tx_desc == np->catch_tx_desc)
+ netif_stop_queue(dev);
+
+ np->txpackets++;
+ spin_unlock_irqrestore(&np->lock, flags);
+
+ return 0;
+}
+
+
+static void
+crisv32_eth_hw_send_packet(unsigned char *buf, int length, void *priv)
+{
+ struct crisv32_ethernet_local *np =
+ (struct crisv32_ethernet_local *) priv;
+
+ /* Configure the tx dma descriptor. */
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+ if (np->gigabit_mode) {
+ np->active_tx_desc->descr.buf = (unsigned char *) crisv32_intmem_virt_to_phys(buf);
+ } else
+#endif
+ {
+ np->active_tx_desc->descr.buf = (unsigned char *) virt_to_phys(buf);
+ }
+
+ np->active_tx_desc->descr.after = np->active_tx_desc->descr.buf +
+ length;
+ np->active_tx_desc->descr.intr = 1;
+ np->active_tx_desc->descr.out_eop = 1;
+
+ /* Move eol. */
+ np->active_tx_desc->descr.eol = 1;
+ np->prev_tx_desc->descr.eol = 0;
+
+
+ /* Update pointers. */
+ np->prev_tx_desc = np->active_tx_desc;
+ np->active_tx_desc = phys_to_virt((int)np->active_tx_desc->descr.next);
+
+ /* Start DMA. */
+ crisv32_start_dma_out(np);
+}
+
+static void
+crisv32_start_dma_out(struct crisv32_ethernet_local* np)
+{
+ if (!np->sender_started) {
+ /* Start DMA for the first time. */
+ np->ctxt_out.saved_data_buf = np->prev_tx_desc->descr.buf;
+ REG_WR(dma, np->dma_out_inst, rw_group_down,
+ (int) virt_to_phys(&np->ctxt_out));
+ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_c);
+ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_d | regk_dma_burst);
+ np->sender_started = 1;
+ } else {
+ DMA_CONTINUE_DATA(np->dma_out_inst);
+ }
+}
+
+/*
+ * Called by upper layers if they decide it took too long to complete sending
+ * a packet - we need to reset and stuff.
+ */
+static void
+crisv32_eth_tx_timeout(struct net_device *dev)
+{
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+ reg_dma_rw_cfg cfg = {0};
+ reg_dma_rw_stat stat = {0};
+ unsigned long flags;
+
+ printk(KERN_WARNING "%s: transmit timed out\n", dev->name);
+
+
+ spin_lock_irqsave(&np->lock, flags);
+ crisv32_ethernet_bug(dev);
+
+ np->txpackets = 0;
+ /* Update error stats. */
+ np->stats.tx_errors++;
+
+ /* Reset the TX DMA in case it has hung on something. */
+ cfg.en = 0;
+ REG_WR(dma, np->dma_out_inst, rw_cfg, cfg);
+
+ do {
+ stat = REG_RD(dma, np->dma_out_inst, rw_stat);
+ } while (stat.mode != regk_dma_rst);
+
+ /* Reset the tranceiver. */
+ crisv32_eth_reset_tranceiver(dev);
+
+ /* Get rid of the packets that never got an interrupt. */
+ do {
+ if (np->catch_tx_desc->skb)
+ dev_kfree_skb(np->catch_tx_desc->skb);
+
+ np->catch_tx_desc->skb = 0;
+ np->catch_tx_desc =
+ phys_to_virt((int)np->catch_tx_desc->descr.next);
+ } while (np->catch_tx_desc != np->active_tx_desc);
+
+
+ /* Start output DMA. */
+ REG_WR(dma, np->dma_out_inst, rw_group_down,
+ (int) virt_to_phys(&np->ctxt_out));
+ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_c);
+ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_d | regk_dma_burst);
+ spin_unlock_irqrestore(&np->lock, flags);
+
+ /* Tell the upper layers we're ok again. */
+ netif_wake_queue(dev);
+}
+
+/*
+ * Set or clear the multicast filter for this adaptor.
+ * num_addrs == -1 Promiscuous mode, receive all packets
+ * num_addrs == 0 Normal mode, clear multicast list
+ * num_addrs > 0 Multicast mode, receive normal and MC packets,
+ * and do best-effort filtering.
+ */
+static void
+crisv32_eth_set_multicast_list(struct net_device *dev)
+{
+ int num_addr = dev->mc_count;
+ unsigned long int lo_bits;
+ unsigned long int hi_bits;
+ reg_eth_rw_rec_ctrl rec_ctrl = {0};
+ reg_eth_rw_ga_lo ga_lo = {0};
+ reg_eth_rw_ga_hi ga_hi = {0};
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ if (dev->flags & IFF_PROMISC) {
+ /* Promiscuous mode. */
+ lo_bits = 0xfffffffful;
+ hi_bits = 0xfffffffful;
+
+ /* Enable individual receive. */
+ rec_ctrl = (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst,
+ rw_rec_ctrl);
+ rec_ctrl.individual = regk_eth_yes;
+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
+ } else if (dev->flags & IFF_ALLMULTI) {
+ /* Enable all multicasts. */
+ lo_bits = 0xfffffffful;
+ hi_bits = 0xfffffffful;
+
+ /* Disable individual receive */
+ rec_ctrl =
+ (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, rw_rec_ctrl);
+ rec_ctrl.individual = regk_eth_no;
+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
+ } else if (num_addr == 0) {
+ /* Normal, clear the mc list. */
+ lo_bits = 0x00000000ul;
+ hi_bits = 0x00000000ul;
+
+ /* Disable individual receive */
+ rec_ctrl =
+ (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, rw_rec_ctrl);
+ rec_ctrl.individual = regk_eth_no;
+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
+ } else {
+ /* MC mode, receive normal and MC packets. */
+ char hash_ix;
+ struct dev_mc_list *dmi = dev->mc_list;
+ int i;
+ char *baddr;
+ lo_bits = 0x00000000ul;
+ hi_bits = 0x00000000ul;
+
+ for (i = 0; i < num_addr; i++) {
+ /* Calculate the hash index for the GA registers. */
+ hash_ix = 0;
+ baddr = dmi->dmi_addr;
+ hash_ix ^= (*baddr) & 0x3f;
+ hash_ix ^= ((*baddr) >> 6) & 0x03;
+ ++baddr;
+ hash_ix ^= ((*baddr) << 2) & 0x03c;
+ hash_ix ^= ((*baddr) >> 4) & 0xf;
+ ++baddr;
+ hash_ix ^= ((*baddr) << 4) & 0x30;
+ hash_ix ^= ((*baddr) >> 2) & 0x3f;
+ ++baddr;
+ hash_ix ^= (*baddr) & 0x3f;
+ hash_ix ^= ((*baddr) >> 6) & 0x03;
+ ++baddr;
+ hash_ix ^= ((*baddr) << 2) & 0x03c;
+ hash_ix ^= ((*baddr) >> 4) & 0xf;
+ ++baddr;
+ hash_ix ^= ((*baddr) << 4) & 0x30;
+ hash_ix ^= ((*baddr) >> 2) & 0x3f;
+
+ hash_ix &= 0x3f;
+
+ if (hash_ix > 32)
+ hi_bits |= (1 << (hash_ix - 32));
+ else
+ lo_bits |= (1 << hash_ix);
+
+ dmi = dmi->next;
+ }
+
+ /* Disable individual receive. */
+ rec_ctrl =
+ (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, rw_rec_ctrl);
+ rec_ctrl.individual = regk_eth_no;
+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
+ }
+
+ ga_lo.tbl = (unsigned int) lo_bits;
+ ga_hi.tbl = (unsigned int) hi_bits;
+
+ REG_WR(eth, np->eth_inst, rw_ga_lo, ga_lo);
+ REG_WR(eth, np->eth_inst, rw_ga_hi, ga_hi);
+}
+
+static int
+crisv32_eth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct mii_ioctl_data *data = if_mii(ifr);
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+ int old_autoneg;
+
+ spin_lock(&np->lock); /* Preempt protection */
+ switch (cmd) {
+ case SIOCGMIIPHY: /* Get PHY address */
+ data->phy_id = np->mdio_phy_addr;
+ break;
+ case SIOCGMIIREG: /* Read MII register */
+ data->val_out = crisv32_eth_get_mdio_reg(dev,
+ data->reg_num);
+ break;
+ case SIOCSMIIREG: /* Write MII register */
+ crisv32_eth_set_mdio_reg(dev, data->reg_num,
+ data->val_in);
+ break;
+ case SET_ETH_ENABLE_LEDS:
+ use_network_leds = 1;
+ break;
+ case SET_ETH_DISABLE_LEDS:
+ use_network_leds = 0;
+ break;
+ case SET_ETH_AUTONEG:
+ old_autoneg = autoneg_normal;
+ autoneg_normal = *(int*)data;
+ if (autoneg_normal != old_autoneg)
+ crisv32_eth_negotiate(dev);
+ break;
+ default:
+ spin_unlock(&np->lock); /* Preempt protection */
+ return -EINVAL;
+ }
+ spin_unlock(&np->lock);
+ return 0;
+}
+
+static int crisv32_eth_get_settings(struct net_device *dev,
+ struct ethtool_cmd *ecmd)
+{
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+ /* What about GMII and 1000xpause? not included in ethtool.h */
+ ecmd->supported = SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII |
+ SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full;
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+ ecmd->supported |= SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full;
+#endif
+ ecmd->port = PORT_TP;
+ ecmd->transceiver = XCVR_EXTERNAL;
+ ecmd->phy_address = np->mdio_phy_addr;
+ ecmd->speed = np->current_speed;
+ ecmd->duplex = np->full_duplex;
+ ecmd->advertising = ADVERTISED_TP;
+
+ if (np->current_duplex == autoneg && np->current_speed_selection == 0)
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ else {
+ ecmd->advertising |=
+ ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full;
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+ ecmd->advertising |= ADVERTISED_1000baseT_Half |
+ ADVERTISED_1000baseT_Full;
+#endif
+ if (np->current_speed_selection == 10)
+ ecmd->advertising &= ~(ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full |
+ ADVERTISED_1000baseT_Half |
+ ADVERTISED_1000baseT_Full);
+
+ else if (np->current_speed_selection == 100)
+ ecmd->advertising &= ~(ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_1000baseT_Half |
+ ADVERTISED_1000baseT_Full);
+
+ else if (np->current_speed_selection == 1000)
+ ecmd->advertising &= ~(ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full);
+
+ if (np->current_duplex == half)
+ ecmd->advertising &= ~(ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Full |
+ ADVERTISED_1000baseT_Full);
+ else if (np->current_duplex == full)
+ ecmd->advertising &= ~(ADVERTISED_10baseT_Half |
+ ADVERTISED_100baseT_Half |
+ ADVERTISED_1000baseT_Half);
+ }
+
+ ecmd->autoneg = AUTONEG_ENABLE;
+ return 0;
+}
+
+static int crisv32_eth_set_settings(struct net_device *dev,
+ struct ethtool_cmd *ecmd)
+{
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ crisv32_eth_set_duplex(dev, autoneg);
+ crisv32_eth_set_speed(dev, 0);
+ } else {
+ crisv32_eth_set_duplex(dev, ecmd->duplex);
+ crisv32_eth_set_speed(dev, ecmd->speed);
+ }
+
+ return 0;
+}
+
+static void crisv32_eth_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strncpy(info->driver, "ETRAX FS", sizeof(info->driver) - 1);
+ strncpy(info->version, "$Revision: 1.96 $", sizeof(info->version) - 1);
+ strncpy(info->fw_version, "N/A", sizeof(info->fw_version) - 1);
+ strncpy(info->bus_info, "N/A", sizeof(info->bus_info) - 1);
+}
+
+static int crisv32_eth_nway_reset(struct net_device *dev)
+{
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ if (np->current_duplex == autoneg && np->current_speed_selection == 0)
+ crisv32_eth_negotiate(dev);
+ return 0;
+}
+
+static struct ethtool_ops crisv32_ethtool_ops = {
+ .get_settings = crisv32_eth_get_settings,
+ .set_settings = crisv32_eth_set_settings,
+ .get_drvinfo = crisv32_eth_get_drvinfo,
+ .nway_reset = crisv32_eth_nway_reset,
+ .get_link = ethtool_op_get_link,
+};
+
+/* Is this function really needed? Use ethtool instead? */
+static int
+crisv32_eth_set_config(struct net_device *dev, struct ifmap *map)
+{
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ spin_lock(&np->lock); /* Preempt protection */
+
+ switch(map->port) {
+ case IF_PORT_UNKNOWN:
+ /* Use autoneg */
+ crisv32_eth_set_speed(dev, 0);
+ crisv32_eth_set_duplex(dev, autoneg);
+ break;
+ case IF_PORT_10BASET:
+ crisv32_eth_set_speed(dev, 10);
+ crisv32_eth_set_duplex(dev, autoneg);
+ break;
+ case IF_PORT_100BASET:
+ case IF_PORT_100BASETX:
+ crisv32_eth_set_speed(dev, 100);
+ crisv32_eth_set_duplex(dev, autoneg);
+ break;
+ case IF_PORT_100BASEFX:
+ case IF_PORT_10BASE2:
+ case IF_PORT_AUI:
+ spin_unlock(&np->lock);
+ return -EOPNOTSUPP;
+ break;
+ default:
+ printk(KERN_ERR "%s: Invalid media selected",
+ dev->name);
+ spin_unlock(&np->lock);
+ return -EINVAL;
+ }
+ spin_unlock(&np->lock);
+ return 0;
+}
+
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+/*
+ * Switch the behaviour of the tx and rx buffers using
+ * external or internal memory. Usage of the internal
+ * memory is required for gigabit operation.
+ */
+static void
+crisv32_eth_switch_intmem_usage(struct net_device *dev)
+{
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ int i;
+ reg_dma_rw_stat stat;
+ reg_dma_rw_cfg cfg = {0};
+ reg_dma_rw_intr_mask intr_mask_in = { .in_eop = regk_dma_yes };
+ reg_dma_rw_ack_intr ack_intr = { .data = 1,.in_eop = 1 };
+ unsigned char *intmem_tmp;
+
+ /* Notify the kernel that the interface has stopped */
+ netif_stop_queue(dev);
+
+ /* Stop the receiver DMA */
+ cfg.en = regk_dma_no;
+ REG_WR(dma, np->dma_in_inst, rw_cfg, cfg);
+
+ if (!(np->gigabit_mode)) {
+ /* deallocate SKBs in rx_desc */
+ for (i = 0; i < NBR_RX_DESC; i++)
+ dev_kfree_skb(np->dma_rx_descr_list[i].skb);
+
+ /* Init TX*/
+ for(i=0; i < NBR_INTMEM_TX_BUF; i++) {
+ /* Allocate internal memory */
+ intmem_tmp = NULL;
+ intmem_tmp = crisv32_intmem_alloc(MAX_MEDIA_DATA_SIZE,
+ 32);
+ /* Check that we really got the memory */
+ if (intmem_tmp == NULL) {
+ printk(KERN_ERR "%s: Can't allocate intmem for"
+ " RX buffer nbr: %d\n", dev->name, i);
+ return;
+ }
+ /* Setup the list entry */
+ np->tx_intmem_buf_list[i].free = 1;
+ np->tx_intmem_buf_list[i].buf = intmem_tmp;
+ np->tx_intmem_buf_list[i].next = &np->tx_intmem_buf_list[i + 1];
+ }
+ /* Setup the last list entry */
+ np->tx_intmem_buf_list[NBR_INTMEM_TX_BUF - 1].next = &np->tx_intmem_buf_list[0];
+ /* Setup initial pointer */
+ np->intmem_tx_buf_active = np->tx_intmem_buf_list;
+ np->intmem_tx_buf_catch = np->tx_intmem_buf_list;
+
+ /* Init RX */
+ for (i=0; i < NBR_INTMEM_RX_DESC; i++) {
+ /* Allocate internal memory */
+ intmem_tmp = NULL;
+ intmem_tmp = crisv32_intmem_alloc(MAX_MEDIA_DATA_SIZE, 32);
+ /* Check that we really got the memory */
+ if (intmem_tmp == NULL) {
+ printk(KERN_ERR "%s: Can't allocate intmem for"
+ " desc nbr: %d\n", dev->name, i);
+ return;
+ }
+ /* Setup the descriptors*/
+ np->dma_rx_descr_list[i].skb = NULL;
+ np->dma_rx_descr_list[i].descr.buf =
+ (void *) crisv32_intmem_virt_to_phys(intmem_tmp);
+ np->dma_rx_descr_list[i].descr.after =
+ (void *) crisv32_intmem_virt_to_phys(intmem_tmp + MAX_MEDIA_DATA_SIZE);
+ np->dma_rx_descr_list[i].descr.eol = 0;
+ np->dma_rx_descr_list[i].descr.in_eop = 0;
+ np->dma_rx_descr_list[i].descr.next =
+ (void *) virt_to_phys(&np->dma_rx_descr_list[i+1].descr);
+ }
+ /* Setup the last rx descriptor */
+ np->dma_rx_descr_list[NBR_INTMEM_RX_DESC - 1].descr.eol = 1;
+ np->dma_rx_descr_list[NBR_INTMEM_RX_DESC - 1].descr.next =
+ (void*) virt_to_phys(&np->dma_rx_descr_list[0].descr);
+ /* Initialise initial receive pointers. */
+ np->active_rx_desc = &np->dma_rx_descr_list[0];
+ np->prev_rx_desc = &np->dma_rx_descr_list[NBR_INTMEM_RX_DESC - 1];
+ np->last_rx_desc = np->prev_rx_desc;
+
+ np->gigabit_mode = 1;
+ } else {
+ /* dealloc TX intmem */
+ for(i=0; i < NBR_INTMEM_TX_BUF; i++)
+ crisv32_intmem_free(np->tx_intmem_buf_list[i].buf);
+
+ /* dealloc RX intmem */
+ for (i=0; i < NBR_INTMEM_RX_DESC; i++)
+ crisv32_intmem_free(crisv32_intmem_phys_to_virt((unsigned long)np->dma_rx_descr_list[i].descr.buf));
+
+ /* Setup new rx_desc and alloc SKBs */
+ for (i = 0; i < NBR_RX_DESC; i++) {
+ struct sk_buff *skb;
+
+ skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE);
+ np->dma_rx_descr_list[i].skb = skb;
+ np->dma_rx_descr_list[i].descr.buf =
+ (char*)virt_to_phys(skb->data);
+ np->dma_rx_descr_list[i].descr.after =
+ (char*)virt_to_phys(skb->data + MAX_MEDIA_DATA_SIZE);
+
+ np->dma_rx_descr_list[i].descr.eol = 0;
+ np->dma_rx_descr_list[i].descr.in_eop = 0;
+ np->dma_rx_descr_list[i].descr.next =
+ (void *) virt_to_phys(&np->dma_rx_descr_list[i + 1].descr);
+ }
+
+ np->dma_rx_descr_list[NBR_RX_DESC - 1].descr.eol = 1;
+ np->dma_rx_descr_list[NBR_RX_DESC - 1].descr.next =
+ (void *) virt_to_phys(&np->dma_rx_descr_list[0].descr);
+
+ /* Initialise initial receive pointers. */
+ np->active_rx_desc = &np->dma_rx_descr_list[0];
+ np->prev_rx_desc = &np->dma_rx_descr_list[NBR_RX_DESC - 1];
+ np->last_rx_desc = np->prev_rx_desc;
+
+ np->gigabit_mode = 0;
+ }
+
+ /* Fill context descriptors. */
+ np->ctxt_in.next = 0;
+ np->ctxt_in.saved_data =
+ (dma_descr_data *) virt_to_phys(&np->dma_rx_descr_list[0].descr);
+ np->ctxt_in.saved_data_buf = np->dma_rx_descr_list[0].descr.buf;
+
+ /* Enable irq and make sure that the irqs are cleared. */
+ REG_WR(dma, np->dma_in_inst, rw_intr_mask, intr_mask_in);
+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr);
+
+ /* Start input dma */
+ cfg.en = regk_dma_yes;
+ REG_WR(dma, np->dma_in_inst, rw_cfg, cfg);
+ REG_WR(dma, np->dma_in_inst, rw_group_down,
+ (int) virt_to_phys(&np->ctxt_in));
+
+ DMA_WR_CMD(np->dma_in_inst, regk_dma_load_c);
+ DMA_WR_CMD(np->dma_in_inst, regk_dma_load_d | regk_dma_burst);
+
+ netif_wake_queue(dev);
+
+ stat = REG_RD(dma, np->dma_in_inst, rw_stat);
+}
+#endif
+
+static void
+crisv32_eth_negotiate(struct net_device *dev)
+{
+ unsigned short data =
+ crisv32_eth_get_mdio_reg(dev, MII_ADVERTISE);
+ unsigned short ctrl1000 =
+ crisv32_eth_get_mdio_reg(dev, MII_CTRL1000);
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ /* Make all capabilities available */
+ data |= ADVERTISE_10HALF | ADVERTISE_10FULL |
+ ADVERTISE_100HALF | ADVERTISE_100FULL;
+ ctrl1000 |= ADVERTISE_1000HALF | ADVERTISE_1000FULL;
+
+ /* Remove the speed capabilities that we that do not want */
+ switch (np->current_speed_selection) {
+ case 10 :
+ data &= ~(ADVERTISE_100HALF | ADVERTISE_100FULL);
+ ctrl1000 &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
+ break;
+ case 100 :
+ data &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL);
+ ctrl1000 &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
+ break;
+ case 1000 :
+ data &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL |
+ ADVERTISE_100HALF | ADVERTISE_100FULL);
+ break;
+ }
+
+ /* Remove the duplex capabilites that we do not want */
+ if (np->current_duplex == full) {
+ data &= ~(ADVERTISE_10HALF | ADVERTISE_100HALF);
+ ctrl1000 &= ~(ADVERTISE_1000HALF);
+ }
+ else if (np->current_duplex == half) {
+ data &= ~(ADVERTISE_10FULL | ADVERTISE_100FULL);
+ ctrl1000 &= ~(ADVERTISE_1000FULL);
+ }
+
+ crisv32_eth_set_mdio_reg(dev, MII_ADVERTISE, data);
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+ crisv32_eth_set_mdio_reg(dev, MII_CTRL1000, ctrl1000);
+#endif
+
+ /* Renegotiate with link partner */
+ if (autoneg_normal) {
+ data = crisv32_eth_get_mdio_reg(dev, MII_BMCR);
+ data |= BMCR_ANENABLE | BMCR_ANRESTART;
+ }
+ crisv32_eth_set_mdio_reg(dev, MII_BMCR, data);
+}
+static void
+crisv32_eth_check_speed(unsigned long idev)
+{
+ static int led_initiated = 0;
+ struct net_device *dev = (struct net_device *) idev;
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ unsigned long data;
+ int old_speed;
+ unsigned long flags;
+
+ BUG_ON(!np);
+ BUG_ON(!np->transceiver);
+
+ spin_lock(&np->transceiver_lock);
+
+ old_speed = np->current_speed;
+ data = crisv32_eth_get_mdio_reg(dev, MII_BMSR);
+
+ if (!(data & BMSR_LSTATUS))
+ np->current_speed = 0;
+ else
+ np->transceiver->check_speed(dev);
+
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+ if ((old_speed != np->current_speed)
+ && ((old_speed == 1000) || (np->current_speed == 1000))) {
+ /* Switch between mii and gmii */
+ reg_eth_rw_gen_ctrl gen_ctrl = REG_RD(eth, np->eth_inst,
+ rw_gen_ctrl);
+ reg_eth_rw_tr_ctrl tr_ctrl = REG_RD(eth, np->eth_inst,
+ rw_tr_ctrl);
+ if (old_speed == 1000) {
+ gen_ctrl.phy = regk_eth_mii;
+ gen_ctrl.gtxclk_out = regk_eth_no;
+ tr_ctrl.carrier_ext = regk_eth_no;
+ }
+ else {
+ gen_ctrl.phy = regk_eth_gmii;
+ gen_ctrl.gtxclk_out = regk_eth_yes;
+ tr_ctrl.carrier_ext = regk_eth_yes;
+ }
+ REG_WR(eth, np->eth_inst, rw_tr_ctrl, tr_ctrl);
+ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl);
+
+ crisv32_eth_switch_intmem_usage(dev);
+ }
+#endif
+
+ spin_lock_irqsave(&np->leds->led_lock, flags);
+ if ((old_speed != np->current_speed) || !led_initiated) {
+ led_initiated = 1;
+ np->leds->clear_led_timer.data = (unsigned long) dev;
+ if (np->current_speed) {
+ netif_carrier_on(dev);
+ crisv32_set_network_leds(LED_LINK, dev);
+ } else {
+ netif_carrier_off(dev);
+ crisv32_set_network_leds(LED_NOLINK, dev);
+ }
+ }
+ spin_unlock_irqrestore(&np->leds->led_lock, flags);
+
+ /* Reinitialize the timer. */
+ np->speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL;
+ add_timer(&np->speed_timer);
+
+ spin_unlock(&np->transceiver_lock);
+}
+
+static void
+crisv32_eth_set_speed(struct net_device *dev, unsigned long speed)
+{
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ spin_lock(&np->transceiver_lock);
+ if (np->current_speed_selection != speed) {
+ np->current_speed_selection = speed;
+ crisv32_eth_negotiate(dev);
+ }
+ spin_unlock(&np->transceiver_lock);
+}
+
+static void
+crisv32_eth_check_duplex(unsigned long idev)
+{
+ struct net_device *dev = (struct net_device *) idev;
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+ reg_eth_rw_rec_ctrl rec_ctrl;
+ int old_duplex = np->full_duplex;
+
+ np->transceiver->check_duplex(dev);
+
+ if (old_duplex != np->full_duplex) {
+ /* Duplex changed. */
+ rec_ctrl = (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst,
+ rw_rec_ctrl);
+ rec_ctrl.duplex = np->full_duplex;
+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
+ }
+
+ /* Reinitialize the timer. */
+ np->duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL;
+ add_timer(&np->duplex_timer);
+}
+
+static void
+crisv32_eth_set_duplex(struct net_device *dev, enum duplex new_duplex)
+{
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+ spin_lock(&np->transceiver_lock);
+ if (np->current_duplex != new_duplex) {
+ np->current_duplex = new_duplex;
+ crisv32_eth_negotiate(dev);
+ }
+ spin_unlock(&np->transceiver_lock);
+}
+
+static int
+crisv32_eth_probe_transceiver(struct net_device *dev)
+{
+ unsigned int phyid_high;
+ unsigned int phyid_low;
+ unsigned int oui;
+ struct transceiver_ops *ops = NULL;
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ /* Probe MDIO physical address. */
+ for (np->mdio_phy_addr = 0;
+ np->mdio_phy_addr <= 31; np->mdio_phy_addr++) {
+ if (crisv32_eth_get_mdio_reg(dev, MII_BMSR) != 0xffff)
+ break;
+ }
+
+ if (np->mdio_phy_addr == 32)
+ return -ENODEV;
+
+ /* Get manufacturer. */
+ phyid_high = crisv32_eth_get_mdio_reg(dev, MII_PHYSID1);
+ phyid_low = crisv32_eth_get_mdio_reg(dev, MII_PHYSID2);
+
+ oui = (phyid_high << 6) | (phyid_low >> 10);
+
+ for (ops = &transceivers[0]; ops->oui; ops++) {
+ if (ops->oui == oui)
+ break;
+ }
+
+ np->transceiver = ops;
+ return 0;
+}
+
+static void
+generic_check_speed(struct net_device *dev)
+{
+ unsigned long data;
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ data = crisv32_eth_get_mdio_reg(dev, MII_ADVERTISE);
+ if ((data & ADVERTISE_100FULL) ||
+ (data & ADVERTISE_100HALF))
+ np->current_speed = 100;
+ else
+ np->current_speed = 10;
+}
+
+static void
+generic_check_duplex(struct net_device *dev)
+{
+ unsigned long data;
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ data = crisv32_eth_get_mdio_reg(dev, MII_ADVERTISE);
+ if ((data & ADVERTISE_10FULL) ||
+ (data & ADVERTISE_100FULL))
+ np->full_duplex = 1;
+ else
+ np->full_duplex = 0;
+}
+
+static void
+broadcom_check_speed(struct net_device *dev)
+{
+ unsigned long data;
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ data = crisv32_eth_get_mdio_reg(dev, MDIO_AUX_CTRL_STATUS_REG);
+ np->current_speed = (data & MDIO_BC_SPEED ? 100 : 10);
+}
+
+static void
+broadcom_check_duplex(struct net_device *dev)
+{
+ unsigned long data;
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ data = crisv32_eth_get_mdio_reg(dev, MDIO_AUX_CTRL_STATUS_REG);
+ np->full_duplex = (data & MDIO_BC_FULL_DUPLEX_IND) ? 1 : 0;
+}
+
+static void
+tdk_check_speed(struct net_device *dev)
+{
+ unsigned long data;
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ data = crisv32_eth_get_mdio_reg(dev, MDIO_TDK_DIAGNOSTIC_REG);
+ np->current_speed = (data & MDIO_TDK_DIAGNOSTIC_RATE ? 100 : 10);
+}
+
+static void
+tdk_check_duplex(struct net_device *dev)
+{
+ unsigned long data;
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ data = crisv32_eth_get_mdio_reg(dev, MDIO_TDK_DIAGNOSTIC_REG);
+ np->full_duplex = (data & MDIO_TDK_DIAGNOSTIC_DPLX) ? 1 : 0;
+
+}
+
+static void
+intel_check_speed(struct net_device *dev)
+{
+ unsigned long data;
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+ data = crisv32_eth_get_mdio_reg(dev, MDIO_INT_STATUS_REG_2);
+ np->current_speed = (data & MDIO_INT_SPEED ? 100 : 10);
+}
+
+static void
+intel_check_duplex(struct net_device *dev)
+{
+ unsigned long data;
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ data = crisv32_eth_get_mdio_reg(dev, MDIO_INT_STATUS_REG_2);
+ np->full_duplex = (data & MDIO_INT_FULL_DUPLEX_IND) ? 1 : 0;
+}
+
+static void
+national_check_speed(struct net_device *dev)
+{
+ unsigned long data;
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ data = crisv32_eth_get_mdio_reg(dev, MDIO_NAT_LINK_AN_REG);
+ if (data & MDIO_NAT_1000)
+ np->current_speed = 1000;
+ else if (data & MDIO_NAT_100)
+ np->current_speed = 100;
+ else
+ np->current_speed = 10;
+}
+
+static void
+national_check_duplex(struct net_device *dev)
+{
+ unsigned long data;
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ data = crisv32_eth_get_mdio_reg(dev, MDIO_NAT_LINK_AN_REG);
+ if (data & MDIO_NAT_FULL_DUPLEX_IND)
+ np->full_duplex = 1;
+ else
+ np->full_duplex = 0;
+}
+
+static void
+crisv32_eth_reset_tranceiver(struct net_device *dev)
+{
+ int i;
+ unsigned short cmd;
+ unsigned short data;
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ data = crisv32_eth_get_mdio_reg(dev, MII_BMCR);
+
+ cmd = (MDIO_START << 14)
+ | (MDIO_WRITE << 12)
+ | (np->mdio_phy_addr << 7)
+ | (MII_BMCR << 2);
+
+ crisv32_eth_send_mdio_cmd(dev, cmd, 1);
+
+ data |= 0x8000;
+
+ /* Magic value is number of bits. */
+ for (i = 15; i >= 0; i--)
+ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, data));
+}
+
+static unsigned short
+crisv32_eth_get_mdio_reg(struct net_device *dev, unsigned char reg_num)
+{
+ int i;
+ unsigned short cmd; /* Data to be sent on MDIO port. */
+ unsigned short data; /* Data read from MDIO. */
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ /* Start of frame, OP Code, Physical Address, Register Address. */
+ cmd = (MDIO_START << 14)
+ | (MDIO_READ << 12)
+ | (np->mdio_phy_addr << 7)
+ | (reg_num << 2);
+
+ crisv32_eth_send_mdio_cmd(dev, cmd, 0);
+
+ data = 0;
+
+ /* Receive data. Magic value is number of bits. */
+ for (i = 15; i >= 0; i--)
+ data |= (crisv32_eth_receive_mdio_bit(dev) << i);
+
+ return data;
+}
+
+static void
+crisv32_eth_set_mdio_reg(struct net_device *dev, unsigned char reg, int value)
+{
+ int bitCounter;
+ unsigned short cmd;
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ cmd = (MDIO_START << 14)
+ | (MDIO_WRITE << 12)
+ | (np->mdio_phy_addr << 7)
+ | (reg << 2);
+
+ crisv32_eth_send_mdio_cmd(dev, cmd, 1);
+
+ /* Data... */
+ for (bitCounter=15; bitCounter>=0 ; bitCounter--) {
+ crisv32_eth_send_mdio_bit(dev, GET_BIT(bitCounter, value));
+ }
+}
+
+static void
+crisv32_eth_send_mdio_cmd(struct net_device *dev, unsigned short cmd,
+ int write_cmd)
+{
+ int i;
+ unsigned char data = 0x2;
+
+ /* Preamble. Magic value is number of bits. */
+ for (i = 31; i >= 0; i--)
+ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, MDIO_PREAMBLE));
+
+ for (i = 15; i >= 2; i--)
+ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, cmd));
+
+ /* Turnaround. */
+ for (i = 1; i >= 0; i--)
+ if (write_cmd)
+ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, data));
+ else
+ crisv32_eth_receive_mdio_bit(dev);
+}
+
+static void
+crisv32_eth_send_mdio_bit(struct net_device *dev, unsigned char bit)
+{
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ reg_eth_rw_mgm_ctrl mgm_ctrl = {
+ .mdoe = regk_eth_yes,
+ .mdio = bit & 1
+ };
+
+ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl);
+
+ udelay(1);
+
+ mgm_ctrl.mdc = 1;
+ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl);
+
+ udelay(1);
+}
+
+static unsigned char
+crisv32_eth_receive_mdio_bit(struct net_device *dev)
+{
+ reg_eth_r_stat stat;
+ reg_eth_rw_mgm_ctrl mgm_ctrl = {0};
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+
+ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl);
+ stat = REG_RD(eth, np->eth_inst, r_stat);
+
+ udelay(1);
+
+ mgm_ctrl.mdc = 1;
+ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl);
+
+ udelay(1);
+ return stat.mdio;
+}
+
+static void
+crisv32_clear_network_leds(unsigned long priv)
+{
+ struct net_device *dev = (struct net_device*)priv;
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&np->leds->led_lock, flags);
+ if (np->leds->led_active && time_after(jiffies, np->leds->led_next_time)) {
+ crisv32_set_network_leds(LED_NOACTIVITY, dev);
+
+ /* Set the earliest time we may set the LED */
+ np->leds->led_next_time = jiffies + NET_FLASH_PAUSE;
+ np->leds->led_active = 0;
+ }
+ spin_unlock_irqrestore(&np->leds->led_lock, flags);
+}
+
+static void
+crisv32_set_network_leds(int active, struct net_device *dev)
+{
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+ int light_leds = 0;
+
+ if (np->leds->ledgrp == LED_GRP_NONE)
+ return;
+
+ if (active == LED_NOLINK) {
+ if (dev == crisv32_dev[0])
+ np->leds->ifisup[0] = 0;
+ else
+ np->leds->ifisup[1] = 0;
+ }
+ else if (active == LED_LINK) {
+ if (dev == crisv32_dev[0])
+ np->leds->ifisup[0] = 1;
+ else
+ np->leds->ifisup[1] = 1;
+#if defined(CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK)
+ light_leds = 1;
+ } else {
+ light_leds = (active == LED_NOACTIVITY);
+#elif defined(CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY)
+ light_leds = 0;
+ } else {
+ light_leds = (active == LED_ACTIVITY);
+#else
+#error "Define either CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK or CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY"
+#endif
+ }
+
+ if (!use_network_leds) {
+ NET_LED_SET(np->leds->ledgrp,LED_OFF);
+ return;
+ }
+
+ if (!np->current_speed) {
+ /* Set link down if none of the interfaces that use this led group is up */
+ if ((np->leds->ifisup[0] + np->leds->ifisup[1]) == 0) {
+#if defined(CONFIG_ETRAX_NETWORK_RED_ON_NO_CONNECTION)
+ /* Make LED red, link is down */
+ NET_LED_SET(np->leds->ledgrp,LED_RED);
+#else
+ NET_LED_SET(np->leds->ledgrp,LED_OFF);
+#endif
+ }
+ }
+ else if (light_leds) {
+ if (np->current_speed == 10) {
+ NET_LED_SET(np->leds->ledgrp,LED_ORANGE);
+ } else {
+ NET_LED_SET(np->leds->ledgrp,LED_GREEN);
+ }
+ }
+ else {
+ NET_LED_SET(np->leds->ledgrp,LED_OFF);
+ }
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void
+crisv32_netpoll(struct net_device* netdev)
+{
+ crisv32rx_eth_interrupt(DMA0_INTR_VECT, netdev, NULL);
+}
+#endif
+
+#ifdef CONFIG_CPU_FREQ
+static int
+crisv32_ethernet_freq_notifier(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct cpufreq_freqs *freqs = data;
+ if (val == CPUFREQ_POSTCHANGE) {
+ int i;
+ for (i = 0; i < 2; i++) {
+ struct net_device* dev = crisv32_dev[i];
+ unsigned short data;
+ if (dev == NULL)
+ continue;
+
+ data = crisv32_eth_get_mdio_reg(dev, MII_BMCR);
+ if (freqs->new == 200000)
+ data &= ~BMCR_PDOWN;
+ else
+ data |= BMCR_PDOWN;
+ crisv32_eth_set_mdio_reg(dev, MII_BMCR, data);
+ }
+ }
+ return 0;
+}
+#endif
+
+/*
+ * Must be called with the np->lock held.
+ */
+static void crisv32_ethernet_bug(struct net_device *dev)
+{
+ struct crisv32_ethernet_local *np = netdev_priv(dev);
+ dma_descr_data *dma_pos;
+ dma_descr_data *in_dma_pos;
+ reg_dma_rw_stat stat = {0};
+ reg_dma_rw_stat in_stat = {0};
+ int i;
+
+ /* Get the current output dma position. */
+ stat = REG_RD(dma, np->dma_out_inst, rw_stat);
+ dma_pos = phys_to_virt(REG_RD_INT(dma, np->dma_out_inst, rw_data));
+ in_stat = REG_RD(dma, np->dma_in_inst, rw_stat);
+ in_dma_pos = phys_to_virt(REG_RD_INT(dma, np->dma_in_inst, rw_data));
+
+ printk("%s:\n"
+ "stat.list_state=%x\n"
+ "stat.mode=%x\n"
+ "stat.stream_cmd_src=%x\n"
+ "dma_pos=%x\n"
+ "in_stat.list_state=%x\n"
+ "in_stat.mode=%x\n"
+ "in_stat.stream_cmd_src=%x\n"
+ "in_dma_pos=%x\n"
+ "catch=%x active=%x\n"
+ "packets=%d queue=%d\n"
+ "intr_vect.r_vect=%x\n"
+ "dma.r_masked_intr=%x dma.rw_ack_intr=%x "
+ "dma.r_intr=%x dma.rw_intr_masked=%x\n"
+ "eth.r_stat=%x\n",
+ __func__,
+ stat.list_state, stat.mode, stat.stream_cmd_src,
+ (unsigned int)dma_pos,
+ in_stat.list_state, in_stat.mode, in_stat.stream_cmd_src,
+ (unsigned int)in_dma_pos,
+ (unsigned int)&np->catch_tx_desc->descr,
+ (unsigned int)&np->active_tx_desc->descr,
+ np->txpackets,
+ netif_queue_stopped(dev),
+ REG_RD_INT(intr_vect, regi_irq, r_vect),
+ REG_RD_INT(dma, np->dma_out_inst, r_masked_intr),
+ REG_RD_INT(dma, np->dma_out_inst, rw_ack_intr),
+ REG_RD_INT(dma, np->dma_out_inst, r_intr),
+ REG_RD_INT(dma, np->dma_out_inst, rw_intr_mask),
+ REG_RD_INT(eth, np->eth_inst, r_stat));
+
+ printk("tx-descriptors:\n");
+ for (i = 0; i < NBR_TX_DESC; i++) {
+ printk("txdesc[%d]=0x%x\n", i, (unsigned int)
+ virt_to_phys(&np->dma_tx_descr_list[i].descr));
+ printk("txdesc[%d].skb=0x%x\n", i,
+ (unsigned int)np->dma_tx_descr_list[i].skb);
+ printk("txdesc[%d].buf=0x%x\n", i,
+ (unsigned int)np->dma_tx_descr_list[i].descr.buf);
+ printk("txdesc[%d].after=0x%x\n", i,
+ (unsigned int)np->dma_tx_descr_list[i].descr.after);
+ printk("txdesc[%d].intr=%x\n", i,
+ np->dma_tx_descr_list[i].descr.intr);
+ printk("txdesc[%d].eol=%x\n", i,
+ np->dma_tx_descr_list[i].descr.eol);
+ printk("txdesc[%d].out_eop=%x\n", i,
+ np->dma_tx_descr_list[i].descr.out_eop);
+ printk("txdesc[%d].wait=%x\n", i,
+ np->dma_tx_descr_list[i].descr.wait);
+ }
+}
+
+
+static int
+crisv32_init_module(void)
+{
+ return crisv32_ethernet_init();
+}
+
+module_init(crisv32_init_module);
diff -urN linux-2.6.19.2.orig/drivers/net/cris/eth_v32.h linux-2.6.19.2.dev/drivers/net/cris/eth_v32.h
--- linux-2.6.19.2.orig/drivers/net/cris/eth_v32.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.2.dev/drivers/net/cris/eth_v32.h 2007-02-06 11:10:37.000000000 +0100
@@ -0,0 +1,248 @@
+/*
+ * Definitions for ETRAX FS ethernet driver.
+ *
+ * Copyright (C) 2003, 2004, 2005 Axis Communications.
+ */
+
+#ifndef _ETRAX_ETHERNET_H_
+#define _ETRAX_ETHERNET_H_
+
+#include <asm/arch/hwregs/dma.h>
+
+
+#define MAX_MEDIA_DATA_SIZE 1522 /* Max packet size. */
+
+#define NBR_RX_DESC 64 /* Number of RX descriptors. */
+#define NBR_TX_DESC 16 /* Number of TX descriptors. */
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+#define NBR_INTMEM_RX_DESC 5 /* Number of RX descriptors in int. mem.
+ * when running in gigabit mode.
+ * Should be less then NBR_RX_DESC
+ */
+#define NBR_INTMEM_TX_BUF 4 /* Number of TX buffers in int. mem
+ * when running in gigabit mode.
+ * Should be less than NBR_TX_DESC
+ */
+#endif
+
+/* Large packets are sent directly to upper layers while small packets
+ * are copied (to reduce memory waste). The following constant
+ * decides the breakpoint.
+ */
+#define RX_COPYBREAK (256)
+
+#define ETHER_HEAD_LEN (14)
+
+/*
+** MDIO constants.
+*/
+#define MDIO_START 0x1
+#define MDIO_READ 0x2
+#define MDIO_WRITE 0x1
+#define MDIO_PREAMBLE 0xfffffffful
+
+/* Broadcom specific */
+#define MDIO_AUX_CTRL_STATUS_REG 0x18
+#define MDIO_BC_FULL_DUPLEX_IND 0x1
+#define MDIO_BC_SPEED 0x2
+
+/* TDK specific */
+#define MDIO_TDK_DIAGNOSTIC_REG 18
+#define MDIO_TDK_DIAGNOSTIC_RATE 0x400
+#define MDIO_TDK_DIAGNOSTIC_DPLX 0x800
+
+/*Intel LXT972A specific*/
+#define MDIO_INT_STATUS_REG_2 0x0011
+#define MDIO_INT_FULL_DUPLEX_IND ( 0x0001 << 9 )
+#define MDIO_INT_SPEED ( 0x0001 << 14 )
+
+/*National Semiconductor DP83865 specific*/
+#define MDIO_NAT_LINK_AN_REG 0x11
+#define MDIO_NAT_1000 (0x0001 << 4)
+#define MDIO_NAT_100 (0x0001 << 3)
+#define MDIO_NAT_FULL_DUPLEX_IND (0x0001 << 1)
+
+/* Network flash constants */
+#define NET_FLASH_TIME (HZ/50) /* 20 ms */
+#define NET_FLASH_PAUSE (HZ/100) /* 10 ms */
+#define NET_LINK_UP_CHECK_INTERVAL (2*HZ) /* 2 seconds. */
+#define NET_DUPLEX_CHECK_INTERVAL (2*HZ) /* 2 seconds. */
+
+/* Duplex settings. */
+enum duplex {
+ half,
+ full,
+ autoneg
+};
+
+/* Some transceivers requires special handling. */
+struct transceiver_ops {
+ unsigned int oui;
+ void (*check_speed) (struct net_device * dev);
+ void (*check_duplex) (struct net_device * dev);
+};
+
+typedef struct crisv32_eth_descr {
+ dma_descr_data descr __attribute__ ((__aligned__(32)));
+ struct sk_buff *skb;
+ unsigned char *linearized_packet;
+} crisv32_eth_descr;
+
+
+
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+struct tx_buffer_list {
+ struct tx_buffer_list *next;
+ unsigned char *buf;
+ char free;
+};
+#endif
+
+/* LED stuff */
+#define LED_GRP_0 0
+#define LED_GRP_1 1
+#define LED_GRP_NONE 2
+
+#define LED_ACTIVITY 0
+#define LED_NOACTIVITY 1
+#define LED_LINK 2
+#define LED_NOLINK 3
+
+struct crisv32_eth_leds {
+ unsigned int ledgrp;
+ int led_active;
+ unsigned long led_next_time;
+ struct timer_list clear_led_timer;
+ spinlock_t led_lock; /* Protect LED state */
+ int ifisup[2];
+};
+
+#define NET_LED_SET(x,y) \
+ do { \
+ if (x == 0) LED_NETWORK_GRP0_SET(y); \
+ if (x == 1) LED_NETWORK_GRP1_SET(y); \
+ } while (0)
+
+/* Information that need to be kept for each device. */
+struct crisv32_ethernet_local {
+ dma_descr_context ctxt_in __attribute__ ((__aligned__(32)));
+ dma_descr_context ctxt_out __attribute__ ((__aligned__(32)));
+
+ crisv32_eth_descr *active_rx_desc;
+ crisv32_eth_descr *prev_rx_desc;
+ crisv32_eth_descr *last_rx_desc;
+
+ crisv32_eth_descr *active_tx_desc;
+ crisv32_eth_descr *prev_tx_desc;
+ crisv32_eth_descr *catch_tx_desc;
+
+ crisv32_eth_descr dma_rx_descr_list[NBR_RX_DESC];
+ crisv32_eth_descr dma_tx_descr_list[NBR_TX_DESC];
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+ struct tx_buffer_list tx_intmem_buf_list[NBR_INTMEM_TX_BUF];
+ struct tx_buffer_list *intmem_tx_buf_active;
+ struct tx_buffer_list *intmem_tx_buf_catch;
+ char gigabit_mode;
+#endif
+ char new_rx_package;
+
+ /* DMA and ethernet registers for the device. */
+ int eth_inst;
+ int dma_in_inst;
+ int dma_out_inst;
+
+ /* Network speed indication. */
+ struct timer_list speed_timer;
+ int current_speed; /* Speed read from tranceiver */
+ int current_speed_selection; /* Speed selected by user */
+ int sender_started;
+ int txpackets;
+
+ struct crisv32_eth_leds *leds;
+
+ /* Duplex. */
+ struct timer_list duplex_timer;
+ int full_duplex;
+ enum duplex current_duplex;
+
+ struct net_device_stats stats;
+
+ /* Transciever address. */
+ unsigned int mdio_phy_addr;
+
+ struct transceiver_ops *transceiver;
+
+ /*
+ * TX control lock. This protects the transmit buffer ring state along
+ * with the "tx full" state of the driver. This means all netif_queue
+ * flow control actions are protected by this lock as well.
+ */
+ spinlock_t lock;
+ spinlock_t transceiver_lock; /* Protect transceiver state. */
+};
+
+/* Function prototypes. */
+static int crisv32_ethernet_init(void);
+static int crisv32_ethernet_device_init(struct net_device* dev);
+static int crisv32_eth_open(struct net_device *dev);
+static int crisv32_eth_close(struct net_device *dev);
+static int crisv32_eth_set_mac_address(struct net_device *dev, void *vpntr);
+static irqreturn_t crisv32rx_eth_interrupt(int irq, void *dev_id);
+static irqreturn_t crisv32tx_eth_interrupt(int irq, void *dev_id);
+static irqreturn_t crisv32nw_eth_interrupt(int irq, void *dev_id);
+static void crisv32_eth_receive_packet(struct net_device *dev);
+static int crisv32_eth_send_packet(struct sk_buff *skb, struct net_device *dev);
+static void crisv32_eth_hw_send_packet(unsigned char *buf, int length,
+ void *priv);
+static void crisv32_eth_tx_timeout(struct net_device *dev);
+static void crisv32_eth_set_multicast_list(struct net_device *dev);
+static int crisv32_eth_ioctl(struct net_device *dev, struct ifreq *ifr,
+ int cmd);
+static int crisv32_eth_set_config(struct net_device* dev, struct ifmap* map);
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+static void crisv32_eth_switch_intmem_usage(struct net_device *dev);
+#endif
+static void crisv32_eth_negotiate(struct net_device *dev);
+static void crisv32_eth_check_speed(unsigned long idev);
+static void crisv32_eth_set_speed(struct net_device *dev, unsigned long speed);
+static void crisv32_eth_check_duplex(unsigned long idev);
+static void crisv32_eth_set_duplex(struct net_device *dev, enum duplex);
+static int crisv32_eth_probe_transceiver(struct net_device *dev);
+
+static struct ethtool_ops crisv32_ethtool_ops;
+
+static void generic_check_speed(struct net_device *dev);
+static void generic_check_duplex(struct net_device *dev);
+static void broadcom_check_speed(struct net_device *dev);
+static void broadcom_check_duplex(struct net_device *dev);
+static void tdk_check_speed(struct net_device *dev);
+static void tdk_check_duplex(struct net_device *dev);
+static void intel_check_speed(struct net_device* dev);
+static void intel_check_duplex(struct net_device *dev);
+static void national_check_speed(struct net_device* dev);
+static void national_check_duplex(struct net_device *dev);
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void crisv32_netpoll(struct net_device* dev);
+#endif
+
+static void crisv32_clear_network_leds(unsigned long dummy);
+static void crisv32_set_network_leds(int active, struct net_device* dev);
+
+static void crisv32_eth_reset_tranceiver(struct net_device *dev);
+static unsigned short crisv32_eth_get_mdio_reg(struct net_device *dev,
+ unsigned char reg_num);
+static void crisv32_eth_set_mdio_reg(struct net_device *dev,
+ unsigned char reg_num,
+ int val);
+static void crisv32_eth_send_mdio_cmd(struct net_device *dev,
+ unsigned short cmd, int write_cmd);
+static void crisv32_eth_send_mdio_bit(struct net_device *dev,
+ unsigned char bit);
+static unsigned char crisv32_eth_receive_mdio_bit(struct net_device *dev);
+
+static struct net_device_stats *crisv32_get_stats(struct net_device *dev);
+static void crisv32_start_dma_out(struct crisv32_ethernet_local* np);
+
+
+#endif /* _ETRAX_ETHERNET_H_ */
View Git Blame Copy Permalink