mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-23 15:47:43 +02:00
aa9eec732f
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34548 3c298f89-4303-0410-b956-a3cf2f4a3e73
379 lines
13 KiB
Diff
379 lines
13 KiB
Diff
--- a/drivers/tty/serial/amba-pl010.c
|
|
+++ b/drivers/tty/serial/amba-pl010.c
|
|
@@ -49,11 +49,10 @@
|
|
|
|
#include <asm/io.h>
|
|
|
|
-#define UART_NR 8
|
|
-
|
|
#define SERIAL_AMBA_MAJOR 204
|
|
#define SERIAL_AMBA_MINOR 16
|
|
-#define SERIAL_AMBA_NR UART_NR
|
|
+#define SERIAL_AMBA_NR CONFIG_SERIAL_AMBA_PL010_NUMPORTS
|
|
+#define SERIAL_AMBA_NAME CONFIG_SERIAL_AMBA_PL010_PORTNAME
|
|
|
|
#define AMBA_ISR_PASS_LIMIT 256
|
|
|
|
@@ -79,9 +78,9 @@ static void pl010_stop_tx(struct uart_po
|
|
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
|
unsigned int cr;
|
|
|
|
- cr = readb(uap->port.membase + UART010_CR);
|
|
+ cr = __raw_readl(uap->port.membase + UART010_CR);
|
|
cr &= ~UART010_CR_TIE;
|
|
- writel(cr, uap->port.membase + UART010_CR);
|
|
+ __raw_writel(cr, uap->port.membase + UART010_CR);
|
|
}
|
|
|
|
static void pl010_start_tx(struct uart_port *port)
|
|
@@ -89,9 +88,9 @@ static void pl010_start_tx(struct uart_p
|
|
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
|
unsigned int cr;
|
|
|
|
- cr = readb(uap->port.membase + UART010_CR);
|
|
+ cr = __raw_readl(uap->port.membase + UART010_CR);
|
|
cr |= UART010_CR_TIE;
|
|
- writel(cr, uap->port.membase + UART010_CR);
|
|
+ __raw_writel(cr, uap->port.membase + UART010_CR);
|
|
}
|
|
|
|
static void pl010_stop_rx(struct uart_port *port)
|
|
@@ -99,9 +98,9 @@ static void pl010_stop_rx(struct uart_po
|
|
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
|
unsigned int cr;
|
|
|
|
- cr = readb(uap->port.membase + UART010_CR);
|
|
+ cr = __raw_readl(uap->port.membase + UART010_CR);
|
|
cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
|
|
- writel(cr, uap->port.membase + UART010_CR);
|
|
+ __raw_writel(cr, uap->port.membase + UART010_CR);
|
|
}
|
|
|
|
static void pl010_enable_ms(struct uart_port *port)
|
|
@@ -109,9 +108,9 @@ static void pl010_enable_ms(struct uart_
|
|
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
|
unsigned int cr;
|
|
|
|
- cr = readb(uap->port.membase + UART010_CR);
|
|
+ cr = __raw_readl(uap->port.membase + UART010_CR);
|
|
cr |= UART010_CR_MSIE;
|
|
- writel(cr, uap->port.membase + UART010_CR);
|
|
+ __raw_writel(cr, uap->port.membase + UART010_CR);
|
|
}
|
|
|
|
static void pl010_rx_chars(struct uart_amba_port *uap)
|
|
@@ -119,9 +118,9 @@ static void pl010_rx_chars(struct uart_a
|
|
struct tty_struct *tty = uap->port.state->port.tty;
|
|
unsigned int status, ch, flag, rsr, max_count = 256;
|
|
|
|
- status = readb(uap->port.membase + UART01x_FR);
|
|
+ status = __raw_readl(uap->port.membase + UART01x_FR);
|
|
while (UART_RX_DATA(status) && max_count--) {
|
|
- ch = readb(uap->port.membase + UART01x_DR);
|
|
+ ch = __raw_readl(uap->port.membase + UART01x_DR);
|
|
flag = TTY_NORMAL;
|
|
|
|
uap->port.icount.rx++;
|
|
@@ -130,9 +129,9 @@ static void pl010_rx_chars(struct uart_a
|
|
* Note that the error handling code is
|
|
* out of the main execution path
|
|
*/
|
|
- rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
|
|
+ rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
|
|
if (unlikely(rsr & UART01x_RSR_ANY)) {
|
|
- writel(0, uap->port.membase + UART01x_ECR);
|
|
+ __raw_writel(0, uap->port.membase + UART01x_ECR);
|
|
|
|
if (rsr & UART01x_RSR_BE) {
|
|
rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
|
|
@@ -162,7 +161,7 @@ static void pl010_rx_chars(struct uart_a
|
|
uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
|
|
|
|
ignore_char:
|
|
- status = readb(uap->port.membase + UART01x_FR);
|
|
+ status = __raw_readl(uap->port.membase + UART01x_FR);
|
|
}
|
|
spin_unlock(&uap->port.lock);
|
|
tty_flip_buffer_push(tty);
|
|
@@ -175,7 +174,7 @@ static void pl010_tx_chars(struct uart_a
|
|
int count;
|
|
|
|
if (uap->port.x_char) {
|
|
- writel(uap->port.x_char, uap->port.membase + UART01x_DR);
|
|
+ __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR);
|
|
uap->port.icount.tx++;
|
|
uap->port.x_char = 0;
|
|
return;
|
|
@@ -187,7 +186,7 @@ static void pl010_tx_chars(struct uart_a
|
|
|
|
count = uap->port.fifosize >> 1;
|
|
do {
|
|
- writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
|
|
+ __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
|
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
|
uap->port.icount.tx++;
|
|
if (uart_circ_empty(xmit))
|
|
@@ -205,9 +204,9 @@ static void pl010_modem_status(struct ua
|
|
{
|
|
unsigned int status, delta;
|
|
|
|
- writel(0, uap->port.membase + UART010_ICR);
|
|
+ __raw_writel(0, uap->port.membase + UART010_ICR);
|
|
|
|
- status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
|
+ status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
|
|
|
delta = status ^ uap->old_status;
|
|
uap->old_status = status;
|
|
@@ -235,7 +234,7 @@ static irqreturn_t pl010_int(int irq, vo
|
|
|
|
spin_lock(&uap->port.lock);
|
|
|
|
- status = readb(uap->port.membase + UART010_IIR);
|
|
+ status = __raw_readl(uap->port.membase + UART010_IIR);
|
|
if (status) {
|
|
do {
|
|
if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
|
|
@@ -248,7 +247,7 @@ static irqreturn_t pl010_int(int irq, vo
|
|
if (pass_counter-- == 0)
|
|
break;
|
|
|
|
- status = readb(uap->port.membase + UART010_IIR);
|
|
+ status = __raw_readl(uap->port.membase + UART010_IIR);
|
|
} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
|
|
UART010_IIR_TIS));
|
|
handled = 1;
|
|
@@ -262,7 +261,7 @@ static irqreturn_t pl010_int(int irq, vo
|
|
static unsigned int pl010_tx_empty(struct uart_port *port)
|
|
{
|
|
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
|
- unsigned int status = readb(uap->port.membase + UART01x_FR);
|
|
+ unsigned int status = __raw_readl(uap->port.membase + UART01x_FR);
|
|
return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
|
|
}
|
|
|
|
@@ -272,7 +271,7 @@ static unsigned int pl010_get_mctrl(stru
|
|
unsigned int result = 0;
|
|
unsigned int status;
|
|
|
|
- status = readb(uap->port.membase + UART01x_FR);
|
|
+ status = __raw_readl(uap->port.membase + UART01x_FR);
|
|
if (status & UART01x_FR_DCD)
|
|
result |= TIOCM_CAR;
|
|
if (status & UART01x_FR_DSR)
|
|
@@ -298,12 +297,12 @@ static void pl010_break_ctl(struct uart_
|
|
unsigned int lcr_h;
|
|
|
|
spin_lock_irqsave(&uap->port.lock, flags);
|
|
- lcr_h = readb(uap->port.membase + UART010_LCRH);
|
|
+ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
|
|
if (break_state == -1)
|
|
lcr_h |= UART01x_LCRH_BRK;
|
|
else
|
|
lcr_h &= ~UART01x_LCRH_BRK;
|
|
- writel(lcr_h, uap->port.membase + UART010_LCRH);
|
|
+ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
|
|
spin_unlock_irqrestore(&uap->port.lock, flags);
|
|
}
|
|
|
|
@@ -335,12 +334,12 @@ static int pl010_startup(struct uart_por
|
|
/*
|
|
* initialise the old status of the modem signals
|
|
*/
|
|
- uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
|
+ uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
|
|
|
/*
|
|
* Finally, enable interrupts
|
|
*/
|
|
- writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
|
|
+ __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
|
|
uap->port.membase + UART010_CR);
|
|
|
|
return 0;
|
|
@@ -365,10 +364,10 @@ static void pl010_shutdown(struct uart_p
|
|
/*
|
|
* disable all interrupts, disable the port
|
|
*/
|
|
- writel(0, uap->port.membase + UART010_CR);
|
|
+ __raw_writel(0, uap->port.membase + UART010_CR);
|
|
|
|
/* disable break condition and fifos */
|
|
- writel(readb(uap->port.membase + UART010_LCRH) &
|
|
+ __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) &
|
|
~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
|
|
uap->port.membase + UART010_LCRH);
|
|
|
|
@@ -391,7 +390,7 @@ pl010_set_termios(struct uart_port *port
|
|
/*
|
|
* Ask the core to calculate the divisor for us.
|
|
*/
|
|
- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
|
|
+ baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
|
|
quot = uart_get_divisor(port, baud);
|
|
|
|
switch (termios->c_cflag & CSIZE) {
|
|
@@ -454,25 +453,25 @@ pl010_set_termios(struct uart_port *port
|
|
uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
|
|
|
|
/* first, disable everything */
|
|
- old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
|
|
+ old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
|
|
|
|
if (UART_ENABLE_MS(port, termios->c_cflag))
|
|
old_cr |= UART010_CR_MSIE;
|
|
|
|
- writel(0, uap->port.membase + UART010_CR);
|
|
+ __raw_writel(0, uap->port.membase + UART010_CR);
|
|
|
|
/* Set baud rate */
|
|
quot -= 1;
|
|
- writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
|
|
- writel(quot & 0xff, uap->port.membase + UART010_LCRL);
|
|
+ __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
|
|
+ __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL);
|
|
|
|
/*
|
|
* ----------v----------v----------v----------v-----
|
|
* NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
|
|
* ----------^----------^----------^----------^-----
|
|
*/
|
|
- writel(lcr_h, uap->port.membase + UART010_LCRH);
|
|
- writel(old_cr, uap->port.membase + UART010_CR);
|
|
+ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
|
|
+ __raw_writel(old_cr, uap->port.membase + UART010_CR);
|
|
|
|
spin_unlock_irqrestore(&uap->port.lock, flags);
|
|
}
|
|
@@ -554,7 +553,7 @@ static struct uart_ops amba_pl010_pops =
|
|
.verify_port = pl010_verify_port,
|
|
};
|
|
|
|
-static struct uart_amba_port *amba_ports[UART_NR];
|
|
+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
|
|
|
|
#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
|
|
|
|
@@ -564,10 +563,10 @@ static void pl010_console_putchar(struct
|
|
unsigned int status;
|
|
|
|
do {
|
|
- status = readb(uap->port.membase + UART01x_FR);
|
|
+ status = __raw_readl(uap->port.membase + UART01x_FR);
|
|
barrier();
|
|
} while (!UART_TX_READY(status));
|
|
- writel(ch, uap->port.membase + UART01x_DR);
|
|
+ __raw_writel(ch, uap->port.membase + UART01x_DR);
|
|
}
|
|
|
|
static void
|
|
@@ -581,8 +580,8 @@ pl010_console_write(struct console *co,
|
|
/*
|
|
* First save the CR then disable the interrupts
|
|
*/
|
|
- old_cr = readb(uap->port.membase + UART010_CR);
|
|
- writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
|
|
+ old_cr = __raw_readl(uap->port.membase + UART010_CR);
|
|
+ __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
|
|
|
|
uart_console_write(&uap->port, s, count, pl010_console_putchar);
|
|
|
|
@@ -591,10 +590,10 @@ pl010_console_write(struct console *co,
|
|
* and restore the TCR
|
|
*/
|
|
do {
|
|
- status = readb(uap->port.membase + UART01x_FR);
|
|
+ status = __raw_readl(uap->port.membase + UART01x_FR);
|
|
barrier();
|
|
} while (status & UART01x_FR_BUSY);
|
|
- writel(old_cr, uap->port.membase + UART010_CR);
|
|
+ __raw_writel(old_cr, uap->port.membase + UART010_CR);
|
|
|
|
clk_disable(uap->clk);
|
|
}
|
|
@@ -603,9 +602,9 @@ static void __init
|
|
pl010_console_get_options(struct uart_amba_port *uap, int *baud,
|
|
int *parity, int *bits)
|
|
{
|
|
- if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
|
|
+ if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
|
|
unsigned int lcr_h, quot;
|
|
- lcr_h = readb(uap->port.membase + UART010_LCRH);
|
|
+ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
|
|
|
|
*parity = 'n';
|
|
if (lcr_h & UART01x_LCRH_PEN) {
|
|
@@ -620,8 +619,8 @@ pl010_console_get_options(struct uart_am
|
|
else
|
|
*bits = 8;
|
|
|
|
- quot = readb(uap->port.membase + UART010_LCRL) |
|
|
- readb(uap->port.membase + UART010_LCRM) << 8;
|
|
+ quot = __raw_readl(uap->port.membase + UART010_LCRL) |
|
|
+ __raw_readl(uap->port.membase + UART010_LCRM) << 8;
|
|
*baud = uap->port.uartclk / (16 * (quot + 1));
|
|
}
|
|
}
|
|
@@ -640,7 +639,7 @@ static int __init pl010_console_setup(st
|
|
* if so, search for the first available port that does have
|
|
* console support.
|
|
*/
|
|
- if (co->index >= UART_NR)
|
|
+ if (co->index >= SERIAL_AMBA_NR)
|
|
co->index = 0;
|
|
uap = amba_ports[co->index];
|
|
if (!uap)
|
|
@@ -662,7 +661,7 @@ static int __init pl010_console_setup(st
|
|
|
|
static struct uart_driver amba_reg;
|
|
static struct console amba_console = {
|
|
- .name = "ttyAM",
|
|
+ .name = SERIAL_AMBA_NAME,
|
|
.write = pl010_console_write,
|
|
.device = uart_console_device,
|
|
.setup = pl010_console_setup,
|
|
@@ -678,11 +677,11 @@ static struct console amba_console = {
|
|
|
|
static struct uart_driver amba_reg = {
|
|
.owner = THIS_MODULE,
|
|
- .driver_name = "ttyAM",
|
|
- .dev_name = "ttyAM",
|
|
+ .driver_name = SERIAL_AMBA_NAME,
|
|
+ .dev_name = SERIAL_AMBA_NAME,
|
|
.major = SERIAL_AMBA_MAJOR,
|
|
.minor = SERIAL_AMBA_MINOR,
|
|
- .nr = UART_NR,
|
|
+ .nr = SERIAL_AMBA_NR,
|
|
.cons = AMBA_CONSOLE,
|
|
};
|
|
|
|
--- a/drivers/tty/serial/Kconfig
|
|
+++ b/drivers/tty/serial/Kconfig
|
|
@@ -16,10 +16,25 @@ config SERIAL_AMBA_PL010
|
|
help
|
|
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
|
|
an Integrator/AP or Integrator/PP2 platform, or if you have a
|
|
- Cirrus Logic EP93xx CPU, say Y or M here.
|
|
+ Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
+config SERIAL_AMBA_PL010_NUMPORTS
|
|
+ int "Maximum number of AMBA PL010 serial ports"
|
|
+ depends on SERIAL_AMBA_PL010
|
|
+ default "8"
|
|
+ ---help---
|
|
+ Set this to the number of serial ports you want the AMBA PL010 driver
|
|
+ to support.
|
|
+
|
|
+config SERIAL_AMBA_PL010_PORTNAME
|
|
+ string "Name of the AMBA PL010 serial ports"
|
|
+ depends on SERIAL_AMBA_PL010
|
|
+ default "ttyAM"
|
|
+ ---help---
|
|
+ ::: To be written :::
|
|
+
|
|
config SERIAL_AMBA_PL010_CONSOLE
|
|
bool "Support for console on AMBA serial port"
|
|
depends on SERIAL_AMBA_PL010=y
|