qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-14 16:32:49 +02:00
Code
b19b50dc61
openwrt-xburst/target/linux/aruba-2.6/patches/010-ar2313_enet.patch
nbd 9c6b657866 add ethernet driver for ap60/61 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@3072 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-01-30 02:04:44 +00:00

2161 lines
62 KiB
Diff
Raw Blame History

diff -urN linux.old/drivers/net/Kconfig linux.net/drivers/net/Kconfig
--- linux.old/drivers/net/Kconfig 2006-01-21 20:15:08.279272000 +0100
+++ linux.net/drivers/net/Kconfig 2006-01-30 01:18:34.910315000 +0100
@@ -176,6 +176,13 @@
source "drivers/net/arm/Kconfig"
+
+config AR2313
+ tristate "AR2313 Ethernet support"
+ depends on NET_ETHERNET && MACH_ARUBA
+ help
+ Support for the AR2313 Ethernet part on Aruba AP60/61
+
config IDT_RC32434_ETH
tristate "IDT RC32434 Local Ethernet support"
depends on NET_ETHERNET
diff -urN linux.old/drivers/net/Makefile linux.net/drivers/net/Makefile
--- linux.old/drivers/net/Makefile 2006-01-21 20:15:08.383226000 +0100
+++ linux.net/drivers/net/Makefile 2006-01-30 01:18:34.914315250 +0100
@@ -35,6 +35,7 @@
obj-$(CONFIG_OAKNET) += oaknet.o 8390.o
+obj-$(CONFIG_AR2313) += ar2313.o
obj-$(CONFIG_IDT_RC32434_ETH) += rc32434_eth.o
obj-$(CONFIG_DGRS) += dgrs.o
obj-$(CONFIG_VORTEX) += 3c59x.o
diff -urN linux.old/drivers/net/ar2313/ar2313.h linux.net/drivers/net/ar2313/ar2313.h
--- linux.old/drivers/net/ar2313/ar2313.h 1970-01-01 01:00:00.000000000 +0100
+++ linux.net/drivers/net/ar2313/ar2313.h 2006-01-25 00:35:55.000000000 +0100
@@ -0,0 +1,190 @@
+#ifndef _AR2313_H_
+#define _AR2313_H_
+
+#include <linux/config.h>
+#include <asm/bootinfo.h>
+#include "platform.h"
+
+extern unsigned long mips_machtype;
+
+#undef ETHERNET_BASE
+#define ETHERNET_BASE ar_eth_base
+#define ETHERNET_SIZE 0x00100000
+#define ETHERNET_MACS 2
+
+#undef DMA_BASE
+#define DMA_BASE ar_dma_base
+#define DMA_SIZE 0x00100000
+
+
+/*
+ * probe link timer - 5 secs
+ */
+#define LINK_TIMER (5*HZ)
+
+/*
+ * Interrupt register base address
+ */
+#define INTERRUPT_BASE PHYS_TO_K1(ar_int_base)
+
+/*
+ * Reset Register
+ */
+#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
+#define RESET_SYSTEM 0x00000001 /* cold reset full system */
+#define RESET_PROC 0x00000002 /* cold reset MIPS core */
+#define RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
+#define RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
+#define RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
+#define RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
+#define RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
+
+#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0)
+#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0)
+#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0)
+
+#ifndef K1_TO_PHYS
+// hack
+#define K1_TO_PHYS(x) (((unsigned int)(x)) & 0x1FFFFFFF) /* kseg1 to physical */
+#endif
+
+#ifndef PHYS_TO_K1
+// hack
+#define PHYS_TO_K1(x) (((unsigned int)(x)) | 0xA0000000) /* physical to kseg1 */
+#endif
+
+#define AR2313_TX_TIMEOUT (HZ/4)
+
+/*
+ * Rings
+ */
+#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc))
+#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
+
+static inline int tx_space (u32 csm, u32 prd)
+{
+ return (csm - prd - 1) & (AR2313_DESCR_ENTRIES - 1);
+}
+
+#if MAX_SKB_FRAGS
+#define TX_RESERVED (MAX_SKB_FRAGS+1) /* +1 for message header */
+#define tx_ring_full(csm, prd) (tx_space(csm, prd) <= TX_RESERVED)
+#else
+#define tx_ring_full 0
+#endif
+
+#define AR2313_MBGET 2
+#define AR2313_MBSET 3
+#define AR2313_PCI_RECONFIG 4
+#define AR2313_PCI_DUMP 5
+#define AR2313_TEST_PANIC 6
+#define AR2313_TEST_NULLPTR 7
+#define AR2313_READ_DATA 8
+#define AR2313_WRITE_DATA 9
+#define AR2313_GET_VERSION 10
+#define AR2313_TEST_HANG 11
+#define AR2313_SYNC 12
+
+
+struct ar2313_cmd {
+ u32 cmd;
+ u32 address; /* virtual address of image */
+ u32 length; /* size of image to download */
+ u32 mailbox; /* mailbox to get/set */
+ u32 data[2]; /* contents of mailbox to read/write */
+};
+
+
+/*
+ * Struct private for the Sibyte.
+ *
+ * Elements are grouped so variables used by the tx handling goes
+ * together, and will go into the same cache lines etc. in order to
+ * avoid cache line contention between the rx and tx handling on SMP.
+ *
+ * Frequently accessed variables are put at the beginning of the
+ * struct to help the compiler generate better/shorter code.
+ */
+struct ar2313_private
+{
+ int version;
+ u32 mb[2];
+
+ volatile ETHERNET_STRUCT *eth_regs;
+ volatile DMA *dma_regs;
+ volatile u32 *int_regs;
+
+ spinlock_t lock; /* Serialise access to device */
+
+ /*
+ * RX and TX descriptors, must be adjacent
+ */
+ ar2313_descr_t *rx_ring;
+ ar2313_descr_t *tx_ring;
+
+
+ struct sk_buff **rx_skb;
+ struct sk_buff **tx_skb;
+
+ /*
+ * RX elements
+ */
+ u32 rx_skbprd;
+ u32 cur_rx;
+
+ /*
+ * TX elements
+ */
+ u32 tx_prd;
+ u32 tx_csm;
+
+ /*
+ * Misc elements
+ */
+ int board_idx;
+ char name[48];
+ struct net_device_stats stats;
+ struct {
+ u32 address;
+ u32 length;
+ char *mapping;
+ } desc;
+
+
+ struct timer_list link_timer;
+ unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */
+ unsigned short mac;
+ unsigned short link; /* 0 - link down, 1 - link up */
+ u16 phyData;
+
+ struct tasklet_struct rx_tasklet;
+ int unloading;
+};
+
+
+/*
+ * Prototypes
+ */
+static int ar2313_init(struct net_device *dev);
+#ifdef TX_TIMEOUT
+static void ar2313_tx_timeout(struct net_device *dev);
+#endif
+#if 0
+static void ar2313_multicast_list(struct net_device *dev);
+#endif
+static int ar2313_restart(struct net_device *dev);
+#if DEBUG
+static void ar2313_dump_regs(struct net_device *dev);
+#endif
+static void ar2313_load_rx_ring(struct net_device *dev, int bufs);
+static irqreturn_t ar2313_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static int ar2313_open(struct net_device *dev);
+static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static int ar2313_close(struct net_device *dev);
+static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
+static void ar2313_init_cleanup(struct net_device *dev);
+static int ar2313_setup_timer(struct net_device *dev);
+static void ar2313_link_timer_fn(unsigned long data);
+static void ar2313_check_link(struct net_device *dev);
+static struct net_device_stats *ar2313_get_stats(struct net_device *dev);
+#endif /* _AR2313_H_ */
diff -urN linux.old/drivers/net/ar2313/ar2313_msg.h linux.net/drivers/net/ar2313/ar2313_msg.h
--- linux.old/drivers/net/ar2313/ar2313_msg.h 1970-01-01 01:00:00.000000000 +0100
+++ linux.net/drivers/net/ar2313/ar2313_msg.h 2006-01-24 22:57:25.000000000 +0100
@@ -0,0 +1,17 @@
+#ifndef _AR2313_MSG_H_
+#define _AR2313_MSG_H_
+
+#define AR2313_MTU 1692
+#define AR2313_PRIOS 1
+#define AR2313_QUEUES (2*AR2313_PRIOS)
+
+#define AR2313_DESCR_ENTRIES 64
+
+typedef struct {
+ volatile unsigned int status; // OWN, Device control and status.
+ volatile unsigned int devcs; // pkt Control bits + Length
+ volatile unsigned int addr; // Current Address.
+ volatile unsigned int descr; // Next descriptor in chain.
+} ar2313_descr_t;
+
+#endif /* _AR2313_MSG_H_ */
diff -urN linux.old/drivers/net/ar2313/dma.h linux.net/drivers/net/ar2313/dma.h
--- linux.old/drivers/net/ar2313/dma.h 1970-01-01 01:00:00.000000000 +0100
+++ linux.net/drivers/net/ar2313/dma.h 2006-01-24 22:58:45.000000000 +0100
@@ -0,0 +1,135 @@
+#ifndef __ARUBA_DMA_H__
+#define __ARUBA_DMA_H__
+
+/*******************************************************************************
+ *
+ * Copyright 2002 Integrated Device Technology, Inc.
+ * All rights reserved.
+ *
+ * DMA register definition.
+ *
+ * File : $Id: dma.h,v 1.3 2002/06/06 18:34:03 astichte Exp $
+ *
+ * Author : ryan.holmQVist@idt.com
+ * Date : 20011005
+ * Update :
+ * $Log: dma.h,v $
+ * Revision 1.3 2002/06/06 18:34:03 astichte
+ * Added XXX_PhysicalAddress and XXX_VirtualAddress
+ *
+ * Revision 1.2 2002/06/05 18:30:46 astichte
+ * Removed IDTField
+ *
+ * Revision 1.1 2002/05/29 17:33:21 sysarch
+ * jba File moved from vcode/include/idt/acacia
+ *
+ *
+ ******************************************************************************/
+
+#define AR_BIT(x) (1 << (x))
+#define DMA_RX_ERR_CRC AR_BIT(1)
+#define DMA_RX_ERR_DRIB AR_BIT(2)
+#define DMA_RX_ERR_MII AR_BIT(3)
+#define DMA_RX_EV2 AR_BIT(5)
+#define DMA_RX_ERR_COL AR_BIT(6)
+#define DMA_RX_LONG AR_BIT(7)
+#define DMA_RX_LS AR_BIT(8) /* last descriptor */
+#define DMA_RX_FS AR_BIT(9) /* first descriptor */
+#define DMA_RX_MF AR_BIT(10) /* multicast frame */
+#define DMA_RX_ERR_RUNT AR_BIT(11) /* runt frame */
+#define DMA_RX_ERR_LENGTH AR_BIT(12) /* length error */
+#define DMA_RX_ERR_DESC AR_BIT(14) /* descriptor error */
+#define DMA_RX_ERROR AR_BIT(15) /* error summary */
+#define DMA_RX_LEN_MASK 0x3fff0000
+#define DMA_RX_LEN_SHIFT 16
+#define DMA_RX_FILT AR_BIT(30)
+#define DMA_RX_OWN AR_BIT(31) /* desc owned by DMA controller */
+
+#define DMA_RX1_BSIZE_MASK 0x000007ff
+#define DMA_RX1_BSIZE_SHIFT 0
+#define DMA_RX1_CHAINED AR_BIT(24)
+#define DMA_RX1_RER AR_BIT(25)
+
+#define DMA_TX_ERR_UNDER AR_BIT(1) /* underflow error */
+#define DMA_TX_ERR_DEFER AR_BIT(2) /* excessive deferral */
+#define DMA_TX_COL_MASK 0x78
+#define DMA_TX_COL_SHIFT 3
+#define DMA_TX_ERR_HB AR_BIT(7) /* hearbeat failure */
+#define DMA_TX_ERR_COL AR_BIT(8) /* excessive collisions */
+#define DMA_TX_ERR_LATE AR_BIT(9) /* late collision */
+#define DMA_TX_ERR_LINK AR_BIT(10) /* no carrier */
+#define DMA_TX_ERR_LOSS AR_BIT(11) /* loss of carrier */
+#define DMA_TX_ERR_JABBER AR_BIT(14) /* transmit jabber timeout */
+#define DMA_TX_ERROR AR_BIT(15) /* frame aborted */
+#define DMA_TX_OWN AR_BIT(31) /* descr owned by DMA controller */
+
+#define DMA_TX1_BSIZE_MASK 0x000007ff
+#define DMA_TX1_BSIZE_SHIFT 0
+#define DMA_TX1_CHAINED AR_BIT(24) /* chained descriptors */
+#define DMA_TX1_TER AR_BIT(25) /* transmit end of ring */
+#define DMA_TX1_FS AR_BIT(29) /* first segment */
+#define DMA_TX1_LS AR_BIT(30) /* last segment */
+#define DMA_TX1_IC AR_BIT(31) /* interrupt on completion */
+
+#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */
+
+#define MAC_CONTROL_RE AR_BIT(2) /* receive enable */
+#define MAC_CONTROL_TE AR_BIT(3) /* transmit enable */
+#define MAC_CONTROL_DC AR_BIT(5) /* Deferral check*/
+#define MAC_CONTROL_ASTP AR_BIT(8) /* Auto pad strip */
+#define MAC_CONTROL_DRTY AR_BIT(10) /* Disable retry */
+#define MAC_CONTROL_DBF AR_BIT(11) /* Disable bcast frames */
+#define MAC_CONTROL_LCC AR_BIT(12) /* late collision ctrl */
+#define MAC_CONTROL_HP AR_BIT(13) /* Hash Perfect filtering */
+#define MAC_CONTROL_HASH AR_BIT(14) /* Unicast hash filtering */
+#define MAC_CONTROL_HO AR_BIT(15) /* Hash only filtering */
+#define MAC_CONTROL_PB AR_BIT(16) /* Pass Bad frames */
+#define MAC_CONTROL_IF AR_BIT(17) /* Inverse filtering */
+#define MAC_CONTROL_PR AR_BIT(18) /* promiscuous mode (valid frames only) */
+#define MAC_CONTROL_PM AR_BIT(19) /* pass multicast */
+#define MAC_CONTROL_F AR_BIT(20) /* full-duplex */
+#define MAC_CONTROL_DRO AR_BIT(23) /* Disable Receive Own */
+#define MAC_CONTROL_HBD AR_BIT(28) /* heart-beat disabled (MUST BE SET) */
+#define MAC_CONTROL_BLE AR_BIT(30) /* big endian mode */
+#define MAC_CONTROL_RA AR_BIT(31) /* receive all (valid and invalid frames) */
+
+#define MII_ADDR_BUSY AR_BIT(0)
+#define MII_ADDR_WRITE AR_BIT(1)
+#define MII_ADDR_REG_SHIFT 6
+#define MII_ADDR_PHY_SHIFT 11
+#define MII_DATA_SHIFT 0
+
+#define FLOW_CONTROL_FCE AR_BIT(1)
+
+#define DMA_BUS_MODE_SWR AR_BIT(0) /* software reset */
+#define DMA_BUS_MODE_BLE AR_BIT(7) /* big endian mode */
+#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */
+#define DMA_BUS_MODE_DBO AR_BIT(20) /* big-endian descriptors */
+
+#define DMA_STATUS_TI AR_BIT(0) /* transmit interrupt */
+#define DMA_STATUS_TPS AR_BIT(1) /* transmit process stopped */
+#define DMA_STATUS_TU AR_BIT(2) /* transmit buffer unavailable */
+#define DMA_STATUS_TJT AR_BIT(3) /* transmit buffer timeout */
+#define DMA_STATUS_UNF AR_BIT(5) /* transmit underflow */
+#define DMA_STATUS_RI AR_BIT(6) /* receive interrupt */
+#define DMA_STATUS_RU AR_BIT(7) /* receive buffer unavailable */
+#define DMA_STATUS_RPS AR_BIT(8) /* receive process stopped */
+#define DMA_STATUS_ETI AR_BIT(10) /* early transmit interrupt */
+#define DMA_STATUS_FBE AR_BIT(13) /* fatal bus interrupt */
+#define DMA_STATUS_ERI AR_BIT(14) /* early receive interrupt */
+#define DMA_STATUS_AIS AR_BIT(15) /* abnormal interrupt summary */
+#define DMA_STATUS_NIS AR_BIT(16) /* normal interrupt summary */
+#define DMA_STATUS_RS_SHIFT 17 /* receive process state */
+#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */
+#define DMA_STATUS_EB_SHIFT 23 /* error bits */
+
+#define DMA_CONTROL_SR AR_BIT(1) /* start receive */
+#define DMA_CONTROL_ST AR_BIT(13) /* start transmit */
+#define DMA_CONTROL_SF AR_BIT(21) /* store and forward */
+
+#endif // __ARUBA_DMA_H__
+
+
+
+
+
diff -urN linux.old/drivers/net/ar2313/platform.h linux.net/drivers/net/ar2313/platform.h
--- linux.old/drivers/net/ar2313/platform.h 1970-01-01 01:00:00.000000000 +0100
+++ linux.net/drivers/net/ar2313/platform.h 2006-01-25 00:10:25.000000000 +0100
@@ -0,0 +1,128 @@
+/********************************************************************************
+ Title: $Source: platform.h,v $
+
+ Author: Dan Steinberg
+ Copyright Integrated Device Technology 2001
+
+ Purpose: AR2313 Register/Bit Definitions
+
+ Update:
+ $Log: platform.h,v $
+
+ Notes: See Merlot architecture spec for complete details. Note, all
+ addresses are virtual addresses in kseg1 (Uncached, Unmapped).
+
+********************************************************************************/
+
+#ifndef PLATFORM_H
+#define PLATFORM_H
+
+#define BIT(x) (1 << (x))
+
+#define RESET_BASE 0xBC003020
+#define RESET_VALUE 0x00000001
+
+/********************************************************************
+ * Device controller
+ ********************************************************************/
+typedef struct {
+ volatile unsigned int flash0;
+} DEVICE;
+
+#define device (*((volatile DEVICE *) DEV_CTL_BASE))
+
+// DDRC register
+#define DEV_WP (1<<26)
+
+/********************************************************************
+ * DDR controller
+ ********************************************************************/
+typedef struct {
+ volatile unsigned int ddrc0;
+ volatile unsigned int ddrc1;
+ volatile unsigned int ddrrefresh;
+} DDR;
+
+#define ddr (*((volatile DDR *) DDR_BASE))
+
+// DDRC register
+#define DDRC_CS(i) ((i&0x3)<<0)
+#define DDRC_WE (1<<2)
+
+/********************************************************************
+ * Ethernet interfaces
+ ********************************************************************/
+#define ETHERNET_BASE 0xB8200000
+
+//
+// New Combo structure for Both Eth0 AND eth1
+//
+typedef struct {
+ volatile unsigned int mac_control; /* 0x00 */
+ volatile unsigned int mac_addr[2]; /* 0x04 - 0x08*/
+ volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */
+ volatile unsigned int mii_addr; /* 0x14 */
+ volatile unsigned int mii_data; /* 0x18 */
+ volatile unsigned int flow_control; /* 0x1c */
+ volatile unsigned int vlan_tag; /* 0x20 */
+ volatile unsigned int pad[7]; /* 0x24 - 0x3c */
+ volatile unsigned int ucast_table[8]; /* 0x40-0x5c */
+
+} ETHERNET_STRUCT;
+
+/********************************************************************
+ * Interrupt controller
+ ********************************************************************/
+
+typedef struct {
+ volatile unsigned int wdog_control; /* 0x08 */
+ volatile unsigned int wdog_timer; /* 0x0c */
+ volatile unsigned int misc_status; /* 0x10 */
+ volatile unsigned int misc_mask; /* 0x14 */
+ volatile unsigned int global_status; /* 0x18 */
+ volatile unsigned int reserved; /* 0x1c */
+ volatile unsigned int reset_control; /* 0x20 */
+} INTERRUPT;
+
+#define interrupt (*((volatile INTERRUPT *) INTERRUPT_BASE))
+
+#define INTERRUPT_MISC_TIMER BIT(0)
+#define INTERRUPT_MISC_AHBPROC BIT(1)
+#define INTERRUPT_MISC_AHBDMA BIT(2)
+#define INTERRUPT_MISC_GPIO BIT(3)
+#define INTERRUPT_MISC_UART BIT(4)
+#define INTERRUPT_MISC_UARTDMA BIT(5)
+#define INTERRUPT_MISC_WATCHDOG BIT(6)
+#define INTERRUPT_MISC_LOCAL BIT(7)
+
+#define INTERRUPT_GLOBAL_ETH BIT(2)
+#define INTERRUPT_GLOBAL_WLAN BIT(3)
+#define INTERRUPT_GLOBAL_MISC BIT(4)
+#define INTERRUPT_GLOBAL_ITIMER BIT(5)
+
+/********************************************************************
+ * DMA controller
+ ********************************************************************/
+#define DMA_BASE 0xB8201000
+
+typedef struct {
+ volatile unsigned int bus_mode; /* 0x00 (CSR0) */
+ volatile unsigned int xmt_poll; /* 0x04 (CSR1) */
+ volatile unsigned int rcv_poll; /* 0x08 (CSR2) */
+ volatile unsigned int rcv_base; /* 0x0c (CSR3) */
+ volatile unsigned int xmt_base; /* 0x10 (CSR4) */
+ volatile unsigned int status; /* 0x14 (CSR5) */
+ volatile unsigned int control; /* 0x18 (CSR6) */
+ volatile unsigned int intr_ena; /* 0x1c (CSR7) */
+ volatile unsigned int rcv_missed; /* 0x20 (CSR8) */
+ volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */
+ volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */
+ volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */
+} DMA;
+
+#define dma (*((volatile DMA *) DMA_BASE))
+
+// macro to convert from virtual to physical address
+#define phys_addr(x) (x & 0x1fffffff)
+
+#endif /* PLATFORM_H */
diff -urN linux.old/drivers/net/ar2313.c linux.net/drivers/net/ar2313.c
--- linux.old/drivers/net/ar2313.c 1970-01-01 01:00:00.000000000 +0100
+++ linux.net/drivers/net/ar2313.c 2006-01-30 01:21:56.822933750 +0100
@@ -0,0 +1,1642 @@
+/*
+ * ar2313.c: Linux driver for the Atheros AR2313 Ethernet device.
+ *
+ * Copyright 2004 by Sameer Dekate, <sdekate@arubanetworks.com>.
+ *
+ * Thanks to Atheros for providing hardware and documentation
+ * enabling me to write this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Additional credits:
+ * This code is taken from John Taylor's Sibyte driver and then
+ * modified for the AR2313.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/highmem.h>
+#include <linux/sockios.h>
+#include <linux/pkt_sched.h>
+#include <linux/compile.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/ctype.h>
+
+#include <net/sock.h>
+#include <net/ip.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+#include <asm/bootinfo.h>
+
+extern char *getenv(char *e);
+
+
+#undef INDEX_DEBUG
+#define DEBUG 0
+#define DEBUG_TX 0
+#define DEBUG_RX 0
+#define DEBUG_INT 0
+#define DEBUG_MC 0
+#define DEBUG_ERR 1
+
+#ifndef __exit
+#define __exit
+#endif
+
+#ifndef min
+#define min(a,b) (((a)<(b))?(a):(b))
+#endif
+
+#ifndef SMP_CACHE_BYTES
+#define SMP_CACHE_BYTES L1_CACHE_BYTES
+#endif
+
+#ifndef SET_MODULE_OWNER
+#define SET_MODULE_OWNER(dev) {do{} while(0);}
+#define AR2313_MOD_INC_USE_COUNT MOD_INC_USE_COUNT
+#define AR2313_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT
+#else
+#define AR2313_MOD_INC_USE_COUNT {do{} while(0);}
+#define AR2313_MOD_DEC_USE_COUNT {do{} while(0);}
+#endif
+
+#define PHYSADDR(a) ((_ACAST32_ (a)) & 0x1fffffff)
+
+MODULE_PARM(ethaddr, "s");
+static char *ethaddr = "00:00:00:00:00:00";
+MODULE_PARM(ifname, "s");
+static char *ifname = "bond" ;
+
+#define AR2313_MBOX_SET_BIT 0x8
+
+#define BOARD_IDX_STATIC 0
+#define BOARD_IDX_OVERFLOW -1
+
+/* margot includes */
+#include <asm/idt-boards/rc32434/rc32434.h>
+
+#include "ar2313/ar2313_msg.h"
+#include "ar2313/platform.h"
+#include "ar2313/dma.h"
+#include "ar2313/ar2313.h"
+
+/*
+ * New interrupt handler strategy:
+ *
+ * An old interrupt handler worked using the traditional method of
+ * replacing an skbuff with a new one when a packet arrives. However
+ * the rx rings do not need to contain a static number of buffer
+ * descriptors, thus it makes sense to move the memory allocation out
+ * of the main interrupt handler and do it in a bottom half handler
+ * and only allocate new buffers when the number of buffers in the
+ * ring is below a certain threshold. In order to avoid starving the
+ * NIC under heavy load it is however necessary to force allocation
+ * when hitting a minimum threshold. The strategy for alloction is as
+ * follows:
+ *
+ * RX_LOW_BUF_THRES - allocate buffers in the bottom half
+ * RX_PANIC_LOW_THRES - we are very low on buffers, allocate
+ * the buffers in the interrupt handler
+ * RX_RING_THRES - maximum number of buffers in the rx ring
+ *
+ * One advantagous side effect of this allocation approach is that the
+ * entire rx processing can be done without holding any spin lock
+ * since the rx rings and registers are totally independent of the tx
+ * ring and its registers. This of course includes the kmalloc's of
+ * new skb's. Thus start_xmit can run in parallel with rx processing
+ * and the memory allocation on SMP systems.
+ *
+ * Note that running the skb reallocation in a bottom half opens up
+ * another can of races which needs to be handled properly. In
+ * particular it can happen that the interrupt handler tries to run
+ * the reallocation while the bottom half is either running on another
+ * CPU or was interrupted on the same CPU. To get around this the
+ * driver uses bitops to prevent the reallocation routines from being
+ * reentered.
+ *
+ * TX handling can also be done without holding any spin lock, wheee
+ * this is fun! since tx_csm is only written to by the interrupt
+ * handler.
+ */
+
+/*
+ * Threshold values for RX buffer allocation - the low water marks for
+ * when to start refilling the rings are set to 75% of the ring
+ * sizes. It seems to make sense to refill the rings entirely from the
+ * intrrupt handler once it gets below the panic threshold, that way
+ * we don't risk that the refilling is moved to another CPU when the
+ * one running the interrupt handler just got the slab code hot in its
+ * cache.
+ */
+#define RX_RING_SIZE AR2313_DESCR_ENTRIES
+#define RX_PANIC_THRES (RX_RING_SIZE/4)
+#define RX_LOW_THRES ((3*RX_RING_SIZE)/4)
+#define CRC_LEN 4
+#define RX_OFFSET 2
+
+#define AR2313_BUFSIZE (AR2313_MTU + ETH_HLEN + CRC_LEN + RX_OFFSET)
+
+#ifdef MODULE
+MODULE_AUTHOR("Sameer Dekate<sdekate@arubanetworks.com>");
+MODULE_DESCRIPTION("AR2313 Ethernet driver");
+#endif
+
+#if DEBUG
+static char version[] __initdata =
+ "ar2313.c: v0.01 2004/01/06 sdekate@arubanetworks.com\n";
+#endif /* DEBUG */
+
+#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
+
+// prototypes
+static short armiiread(short phy, short reg);
+static void armiiwrite(short phy, short reg, short data);
+#ifdef TX_TIMEOUT
+static void ar2313_tx_timeout(struct net_device *dev);
+#endif
+static void ar2313_halt(struct net_device *dev);
+static void rx_tasklet_func(unsigned long data);
+static void ar2313_multicast_list(struct net_device *dev);
+
+static struct net_device *root_dev;
+static int probed __initdata = 0;
+static unsigned long ar_eth_base;
+static unsigned long ar_dma_base;
+static unsigned long ar_int_base;
+static unsigned long ar_int_mac_mask;
+static unsigned long ar_int_phy_mask;
+
+#ifndef ERR
+#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
+#endif
+
+static int parse_mac_addr(struct net_device *dev, char* macstr){
+ int i, j;
+ unsigned char result, value;
+
+ for (i=0; i<6; i++) {
+ result = 0;
+ if (i != 5 && *(macstr+2) != ':') {
+ ERR("invalid mac address format: %d %c\n",
+ i, *(macstr+2));
+ return -EINVAL;
+ }
+ for (j=0; j<2; j++) {
+ if (isxdigit(*macstr) && (value = isdigit(*macstr) ? *macstr-'0' :
+ toupper(*macstr)-'A'+10) < 16)
+ {
+ result = result*16 + value;
+ macstr++;
+ }
+ else {
+ ERR("invalid mac address "
+ "character: %c\n", *macstr);
+ return -EINVAL;
+ }
+ }
+
+ macstr++;
+ dev->dev_addr[i] = result;
+ }
+
+ return 0;
+}
+
+
+int __init ar2313_probe(void)
+{
+ struct net_device *dev;
+ struct ar2313_private *sp;
+ int version_disp;
+ char name[64] ;
+
+ if (probed)
+ return -ENODEV;
+ probed++;
+
+ version_disp = 0;
+ sprintf(name, "%s%%d", ifname) ;
+ dev = alloc_etherdev(sizeof(struct ar2313_private));
+
+ if (dev == NULL) {
+ printk(KERN_ERR "ar2313: Unable to allocate net_device structure!\n");
+ return -ENOMEM;
+ }
+
+ SET_MODULE_OWNER(dev);
+
+ sp = dev->priv;
+
+ sp->link = 0;
+ switch (mips_machtype) {
+ case MACH_ARUBA_AP60:
+ ar_eth_base = 0xb8100000;
+ ar_dma_base = ar_eth_base + 0x1000;
+ ar_int_base = 0x1C003020;
+ ar_int_mac_mask = RESET_ENET0|RESET_ENET1;
+ ar_int_phy_mask = RESET_EPHY0|RESET_EPHY1;
+ sp->mac = 1;
+ sp->phy = 1;
+ dev->irq = 4;
+ break;
+
+ case MACH_ARUBA_AP40:
+ ar_eth_base = 0xb0500000;
+ ar_dma_base = ar_eth_base + 0x1000;
+ ar_int_base = 0x11000004;
+ ar_int_mac_mask = 0x800;
+ ar_int_phy_mask = 0x400;
+ sp->mac = 0;
+ sp->phy = 1;
+ dev->irq = 4;
+ break;
+
+ case MACH_ARUBA_AP65:
+ ar_eth_base = 0xb8100000;
+ ar_dma_base = ar_eth_base + 0x1000;
+ ar_int_base = 0x1C003020;
+ ar_int_mac_mask = RESET_ENET0|RESET_ENET1;
+ ar_int_phy_mask = RESET_EPHY0|RESET_EPHY1;
+ sp->mac = 0;
+#if 0
+ // commented out, for now
+
+ if (mips_machtype == MACH_ARUBA_SAMSUNG) {
+ sp->phy = 0x1f;
+ } else {
+ sp->phy = 1;
+ }
+#else
+ sp->phy = 1;
+#endif
+ dev->irq = 3;
+ break;
+
+ default:
+ printk("%s: unsupported mips_machtype=0x%lx\n",
+ __FUNCTION__, mips_machtype) ;
+ return -ENODEV;
+ }
+
+ spin_lock_init(&sp->lock);
+
+ /* initialize func pointers */
+ dev->open = &ar2313_open;
+ dev->stop = &ar2313_close;
+ dev->hard_start_xmit = &ar2313_start_xmit;
+
+ dev->get_stats = &ar2313_get_stats;
+ dev->set_multicast_list = &ar2313_multicast_list;
+#ifdef TX_TIMEOUT
+ dev->tx_timeout = ar2313_tx_timeout;
+ dev->watchdog_timeo = AR2313_TX_TIMEOUT;
+#endif
+ dev->do_ioctl = &ar2313_ioctl;
+
+ // SAMEER: do we need this?
+ dev->features |= NETIF_F_SG | NETIF_F_HIGHDMA;
+
+ tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
+ tasklet_disable(&sp->rx_tasklet);
+
+ /* display version info if adapter is found */
+ if (!version_disp) {
+ /* set display flag to TRUE so that */
+ /* we only display this string ONCE */
+ version_disp = 1;
+#if DEBUG
+ printk(version);
+#endif /* DEBUG */
+ }
+
+ request_region(PHYSADDR(ETHERNET_BASE), ETHERNET_SIZE*ETHERNET_MACS,
+ "AR2313ENET");
+
+ sp->eth_regs = ioremap_nocache(PHYSADDR(ETHERNET_BASE + ETHERNET_SIZE*sp->mac),
+ sizeof(*sp->eth_regs));
+ if (!sp->eth_regs) {
+ printk("Can't remap eth registers\n");
+ return(-ENXIO);
+ }
+
+ sp->dma_regs = ioremap_nocache(PHYSADDR(DMA_BASE + DMA_SIZE*sp->mac),
+ sizeof(*sp->dma_regs));
+ dev->base_addr = (unsigned int) sp->dma_regs;
+ if (!sp->dma_regs) {
+ printk("Can't remap DMA registers\n");
+ return(-ENXIO);
+ }
+
+ sp->int_regs = ioremap_nocache(PHYSADDR(INTERRUPT_BASE),
+ sizeof(*sp->int_regs));
+ if (!sp->int_regs) {
+ printk("Can't remap INTERRUPT registers\n");
+ return(-ENXIO);
+ }
+
+ strncpy(sp->name, "Atheros AR2313", sizeof (sp->name) - 1);
+ sp->name [sizeof (sp->name) - 1] = '\0';
+
+ {
+ char mac[32];
+ extern char *getenv(char *e);
+ unsigned char def_mac[6] = {0, 0x0b, 0x86, 0xba, 0xdb, 0xad};
+ memset(mac, 0, 32);
+ memcpy(mac, getenv("ethaddr"), 17);
+ if (parse_mac_addr(dev, mac)){
+ printk("%s: MAC address not found, using default\n", __func__);
+ memcpy(dev->dev_addr, def_mac, 6);
+ }
+ }
+
+ sp->board_idx = BOARD_IDX_STATIC;
+
+ if (ar2313_init(dev)) {
+ /*
+ * ar2313_init() calls ar2313_init_cleanup() on error.
+ */
+ kfree(dev);
+ return -ENODEV;
+ }
+
+ if (register_netdev(dev)){
+ printk("%s: register_netdev failed\n", __func__);
+ return -1;
+ }
+
+ printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
+ dev->name, sp->name,
+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5],
+ dev->irq);
+
+ /* start link poll timer */
+ ar2313_setup_timer(dev);
+
+ /*
+ * Register the device
+ */
+ root_dev = dev;
+
+ return 0;
+}
+
+#if 0
+static void ar2313_dump_regs(struct net_device *dev)
+{
+ unsigned int *ptr, i;
+ struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
+
+ ptr = (unsigned int *)sp->eth_regs;
+ for(i=0; i< (sizeof(ETHERNET_STRUCT)/ sizeof(unsigned int)); i++, ptr++) {
+ printk("ENET: %08x = %08x\n", (int)ptr, *ptr);
+ }
+
+ ptr = (unsigned int *)sp->dma_regs;
+ for(i=0; i< (sizeof(DMA)/ sizeof(unsigned int)); i++, ptr++) {
+ printk("DMA: %08x = %08x\n", (int)ptr, *ptr);
+ }
+
+ ptr = (unsigned int *)sp->int_regs;
+ for(i=0; i< (sizeof(INTERRUPT)/ sizeof(unsigned int)); i++, ptr++){
+ printk("INT: %08x = %08x\n", (int)ptr, *ptr);
+ }
+
+ for (i = 0; i < AR2313_DESCR_ENTRIES; i++) {
+ ar2313_descr_t *td = &sp->tx_ring[i];
+ printk("Tx desc %2d: %08x %08x %08x %08x\n", i,
+ td->status, td->devcs, td->addr, td->descr);
+ }
+}
+#endif
+
+#ifdef TX_TIMEOUT
+static void
+ar2313_tx_timeout(struct net_device *dev)
+{
+ struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
+ unsigned long flags;
+
+#if DEBUG_TX
+ printk("Tx timeout\n");
+#endif
+ spin_lock_irqsave(&sp->lock, flags);
+ ar2313_restart(dev);
+ spin_unlock_irqrestore(&sp->lock, flags);
+}
+#endif
+
+#if DEBUG_MC
+static void
+printMcList(struct net_device *dev)
+{
+ struct dev_mc_list *list = dev->mc_list;
+ int num=0, i;
+ while(list){
+ printk("%d MC ADDR ", num);
+ for(i=0;i<list->dmi_addrlen;i++) {
+ printk(":%02x", list->dmi_addr[i]);
+ }
+ list = list->next;
+ printk("\n");
+ }
+}
+#endif
+
+/*
+ * Set or clear the multicast filter for this adaptor.
+ * THIS IS ABSOLUTE CRAP, disabled
+ */
+static void
+ar2313_multicast_list(struct net_device *dev)
+{
+ /*
+ * Always listen to broadcasts and
+ * treat IFF bits independently
+ */
+ struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
+ unsigned int recognise;
+
+ recognise = sp->eth_regs->mac_control;
+
+ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
+ recognise |= MAC_CONTROL_PR;
+ } else {
+ recognise &= ~MAC_CONTROL_PR;
+ }
+
+ if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 15)) {
+#if DEBUG_MC
+ printMcList(dev);
+ printk("%s: all MULTICAST mc_count %d\n", __FUNCTION__, dev->mc_count);
+#endif
+ recognise |= MAC_CONTROL_PM;/* all multicast */
+ } else if (dev->mc_count > 0) {
+#if DEBUG_MC
+ printMcList(dev);
+ printk("%s: mc_count %d\n", __FUNCTION__, dev->mc_count);
+#endif
+ recognise |= MAC_CONTROL_PM; /* for the time being */
+ }
+#if DEBUG_MC
+ printk("%s: setting %08x to %08x\n", __FUNCTION__, (int)sp->eth_regs, recognise);
+#endif
+
+ sp->eth_regs->mac_control = recognise;
+}
+
+static void rx_tasklet_cleanup(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+
+ /*
+ * Tasklet may be scheduled. Need to get it removed from the list
+ * since we're about to free the struct.
+ */
+
+ sp->unloading = 1;
+ tasklet_enable(&sp->rx_tasklet);
+ tasklet_kill(&sp->rx_tasklet);
+}
+
+static void __exit ar2313_module_cleanup(void)
+{
+ rx_tasklet_cleanup(root_dev);
+ ar2313_init_cleanup(root_dev);
+ unregister_netdev(root_dev);
+ kfree(root_dev);
+ release_region(PHYSADDR(ETHERNET_BASE), ETHERNET_SIZE*ETHERNET_MACS);
+}
+
+
+/*
+ * Restart the AR2313 ethernet controller.
+ */
+static int ar2313_restart(struct net_device *dev)
+{
+ /* disable interrupts */
+ disable_irq(dev->irq);
+
+ /* stop mac */
+ ar2313_halt(dev);
+
+ /* initialize */
+ ar2313_init(dev);
+
+ /* enable interrupts */
+ enable_irq(dev->irq);
+
+ return 0;
+}
+
+extern unsigned long mips_machtype;
+
+int __init ar2313_module_init(void)
+{
+ int status=-1;
+ switch (mips_machtype){
+ case MACH_ARUBA_AP60:
+ case MACH_ARUBA_AP65:
+ case MACH_ARUBA_AP40:
+ root_dev = NULL;
+ status = ar2313_probe();
+ break;
+ }
+ return status;
+}
+
+
+module_init(ar2313_module_init);
+module_exit(ar2313_module_cleanup);
+
+
+static void ar2313_free_descriptors(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ if (sp->rx_ring != NULL) {
+ kfree((void*)KSEG0ADDR(sp->rx_ring));
+ sp->rx_ring = NULL;
+ sp->tx_ring = NULL;
+ }
+}
+
+
+static int ar2313_allocate_descriptors(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ int size;
+ int j;
+ ar2313_descr_t *space;
+
+ if(sp->rx_ring != NULL){
+ printk("%s: already done.\n", __FUNCTION__);
+ return 0;
+ }
+
+ size = (sizeof(ar2313_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
+ space = kmalloc(size, GFP_KERNEL);
+ if (space == NULL)
+ return 1;
+
+ /* invalidate caches */
+ dma_cache_inv((unsigned int)space, size);
+
+ /* now convert pointer to KSEG1 */
+ space = (ar2313_descr_t *)KSEG1ADDR(space);
+
+ memset((void *)space, 0, size);
+
+ sp->rx_ring = space;
+ space += AR2313_DESCR_ENTRIES;
+
+ sp->tx_ring = space;
+ space += AR2313_DESCR_ENTRIES;
+
+ /* Initialize the transmit Descriptors */
+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
+ ar2313_descr_t *td = &sp->tx_ring[j];
+ td->status = 0;
+ td->devcs = DMA_TX1_CHAINED;
+ td->addr = 0;
+ td->descr = K1_TO_PHYS(&sp->tx_ring[(j+1) & (AR2313_DESCR_ENTRIES-1)]);
+ }
+
+ return 0;
+}
+
+
+/*
+ * Generic cleanup handling data allocated during init. Used when the
+ * module is unloaded or if an error occurs during initialization
+ */
+static void ar2313_init_cleanup(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ struct sk_buff *skb;
+ int j;
+
+ ar2313_free_descriptors(dev);
+
+ if (sp->eth_regs) iounmap((void*)sp->eth_regs);
+ if (sp->dma_regs) iounmap((void*)sp->dma_regs);
+
+ if (sp->rx_skb) {
+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
+ skb = sp->rx_skb[j];
+ if (skb) {
+ sp->rx_skb[j] = NULL;
+ dev_kfree_skb(skb);
+ }
+ }
+ kfree(sp->rx_skb);
+ sp->rx_skb = NULL;
+ }
+
+ if (sp->tx_skb) {
+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
+ skb = sp->tx_skb[j];
+ if (skb) {
+ sp->tx_skb[j] = NULL;
+ dev_kfree_skb(skb);
+ }
+ }
+ kfree(sp->tx_skb);
+ sp->tx_skb = NULL;
+ }
+}
+
+static int ar2313_setup_timer(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+
+ init_timer(&sp->link_timer);
+
+ sp->link_timer.function = ar2313_link_timer_fn;
+ sp->link_timer.data = (int) dev;
+ sp->link_timer.expires = jiffies + HZ;
+
+ add_timer(&sp->link_timer);
+ return 0;
+
+}
+
+static void ar2313_link_timer_fn(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct ar2313_private *sp = dev->priv;
+
+ // see if the link status changed
+ // This was needed to make sure we set the PHY to the
+ // autonegotiated value of half or full duplex.
+ ar2313_check_link(dev);
+
+ // Loop faster when we don't have link.
+ // This was needed to speed up the AP bootstrap time.
+ if(sp->link == 0) {
+ mod_timer(&sp->link_timer, jiffies + HZ/2);
+ } else {
+ mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
+ }
+}
+
+static void ar2313_check_link(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ u16 phyData;
+
+ phyData = armiiread(sp->phy, MII_BMSR);
+ if (sp->phyData != phyData) {
+ if (phyData & BMSR_LSTATUS) {
+ /* link is present, ready link partner ability to deterine duplexity */
+ int duplex = 0;
+ u16 reg;
+
+ sp->link = 1;
+ reg = armiiread(sp->phy, MII_BMCR);
+ if (reg & BMCR_ANENABLE) {
+ /* auto neg enabled */
+ reg = armiiread(sp->phy, MII_LPA);
+ duplex = (reg & (LPA_100FULL|LPA_10FULL))? 1:0;
+ } else {
+ /* no auto neg, just read duplex config */
+ duplex = (reg & BMCR_FULLDPLX)? 1:0;
+ }
+
+ printk(KERN_INFO "%s: Configuring MAC for %s duplex\n", dev->name,
+ (duplex)? "full":"half");
+
+ if (duplex) {
+ /* full duplex */
+ sp->eth_regs->mac_control = ((sp->eth_regs->mac_control | MAC_CONTROL_F) &
+ ~MAC_CONTROL_DRO);
+ } else {
+ /* half duplex */
+ sp->eth_regs->mac_control = ((sp->eth_regs->mac_control | MAC_CONTROL_DRO) &
+ ~MAC_CONTROL_F);
+ }
+ } else {
+ /* no link */
+ sp->link = 0;
+ }
+ sp->phyData = phyData;
+ }
+}
+
+static int
+ar2313_reset_reg(struct net_device *dev)
+{
+ struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
+ unsigned int ethsal, ethsah;
+ unsigned int flags;
+
+ *sp->int_regs |= ar_int_mac_mask;
+ mdelay(10);
+ *sp->int_regs &= ~ar_int_mac_mask;
+ mdelay(10);
+ *sp->int_regs |= ar_int_phy_mask;
+ mdelay(10);
+ *sp->int_regs &= ~ar_int_phy_mask;
+ mdelay(10);
+
+ sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
+ mdelay(10);
+ sp->dma_regs->bus_mode = ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
+
+ /* enable interrupts */
+ sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
+ DMA_STATUS_NIS |
+ DMA_STATUS_RI |
+ DMA_STATUS_TI |
+ DMA_STATUS_FBE);
+ sp->dma_regs->xmt_base = K1_TO_PHYS(sp->tx_ring);
+ sp->dma_regs->rcv_base = K1_TO_PHYS(sp->rx_ring);
+ sp->dma_regs->control = (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
+
+ sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
+ sp->eth_regs->vlan_tag = (0x8100);
+
+ /* Enable Ethernet Interface */
+ flags = (MAC_CONTROL_TE | /* transmit enable */
+ MAC_CONTROL_PM | /* pass mcast */
+ MAC_CONTROL_F | /* full duplex */
+ MAC_CONTROL_HBD); /* heart beat disabled */
+
+ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
+ flags |= MAC_CONTROL_PR;
+ }
+ sp->eth_regs->mac_control = flags;
+
+ /* Set all Ethernet station address registers to their initial values */
+ ethsah = ((((u_int)(dev->dev_addr[5]) << 8) & (u_int)0x0000FF00) |
+ (((u_int)(dev->dev_addr[4]) << 0) & (u_int)0x000000FF));
+
+ ethsal = ((((u_int)(dev->dev_addr[3]) << 24) & (u_int)0xFF000000) |
+ (((u_int)(dev->dev_addr[2]) << 16) & (u_int)0x00FF0000) |
+ (((u_int)(dev->dev_addr[1]) << 8) & (u_int)0x0000FF00) |
+ (((u_int)(dev->dev_addr[0]) << 0) & (u_int)0x000000FF) );
+
+ sp->eth_regs->mac_addr[0] = ethsah;
+ sp->eth_regs->mac_addr[1] = ethsal;
+
+ mdelay(10);
+
+ return(0);
+}
+
+
+static int ar2313_init(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ int ecode=0;
+
+ /*
+ * Allocate descriptors
+ */
+ if (ar2313_allocate_descriptors(dev)) {
+ printk("%s: %s: ar2313_allocate_descriptors failed\n",
+ dev->name, __FUNCTION__);
+ ecode = -EAGAIN;
+ goto init_error;
+ }
+
+ /*
+ * Get the memory for the skb rings.
+ */
+ if(sp->rx_skb == NULL) {
+ sp->rx_skb = kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, GFP_KERNEL);
+ if (!(sp->rx_skb)) {
+ printk("%s: %s: rx_skb kmalloc failed\n",
+ dev->name, __FUNCTION__);
+ ecode = -EAGAIN;
+ goto init_error;
+ }
+ }
+ memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
+
+ if(sp->tx_skb == NULL) {
+ sp->tx_skb = kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, GFP_KERNEL);
+ if (!(sp->tx_skb)) {
+ printk("%s: %s: tx_skb kmalloc failed\n",
+ dev->name, __FUNCTION__);
+ ecode = -EAGAIN;
+ goto init_error;
+ }
+ }
+ memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
+
+ /*
+ * Set tx_csm before we start receiving interrupts, otherwise
+ * the interrupt handler might think it is supposed to process
+ * tx ints before we are up and running, which may cause a null
+ * pointer access in the int handler.
+ */
+ sp->rx_skbprd = 0;
+ sp->cur_rx = 0;
+ sp->tx_prd = 0;
+ sp->tx_csm = 0;
+
+ /*
+ * Zero the stats before starting the interface
+ */
+ memset(&sp->stats, 0, sizeof(sp->stats));
+
+ /*
+ * We load the ring here as there seem to be no way to tell the
+ * firmware to wipe the ring without re-initializing it.
+ */
+ ar2313_load_rx_ring(dev, RX_RING_SIZE);
+
+ /*
+ * Init hardware
+ */
+ ar2313_reset_reg(dev);
+
+ /*
+ * Get the IRQ
+ */
+ ecode = request_irq(dev->irq, &ar2313_interrupt, SA_SHIRQ | SA_INTERRUPT, dev->name, dev);
+ if (ecode) {
+ printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
+ dev->name, __FUNCTION__, dev->irq);
+ goto init_error;
+ }
+
+#if 0
+ // commented out, for now
+
+ if(mips_machtype == MACH_ARUBA_SAMSUNG) {
+ int i;
+ /* configure Marvell 88E6060 */
+ /* reset chip */
+ armiiwrite(0x1f, 0xa, 0xa130);
+ do {
+ udelay(1000);
+ i = armiiread(sp->phy, 0xa);
+ } while (i & 0x8000);
+
+ /* configure MAC address */
+ armiiwrite(sp->phy, 0x1, dev->dev_addr[0] << 8 | dev->dev_addr[1]);
+ armiiwrite(sp->phy, 0x2, dev->dev_addr[2] << 8 | dev->dev_addr[3]);
+ armiiwrite(sp->phy, 0x3, dev->dev_addr[4] << 8 | dev->dev_addr[5]);
+
+ /* set ports to forwarding */
+ armiiwrite(0x18, 0x4, 0x3);
+ armiiwrite(0x1c, 0x4, 0x3);
+ armiiwrite(0x1d, 0x4, 0x3);
+ }
+#endif
+
+ tasklet_enable(&sp->rx_tasklet);
+
+ return 0;
+
+ init_error:
+ ar2313_init_cleanup(dev);
+ return ecode;
+}
+
+/*
+ * Load the rx ring.
+ *
+ * Loading rings is safe without holding the spin lock since this is
+ * done only before the device is enabled, thus no interrupts are
+ * generated and by the interrupt handler/tasklet handler.
+ */
+static void ar2313_load_rx_ring(struct net_device *dev, int nr_bufs)
+{
+
+ struct ar2313_private *sp = ((struct net_device *)dev)->priv;
+ short i, idx;
+
+ idx = sp->rx_skbprd;
+
+ for (i = 0; i < nr_bufs; i++) {
+ struct sk_buff *skb;
+ ar2313_descr_t *rd;
+
+ if (sp->rx_skb[idx]) {
+#if DEBUG_RX
+ printk(KERN_INFO "ar2313 rx refill full\n");
+#endif /* DEBUG */
+ break;
+ }
+
+ // partha: create additional room for the second GRE fragment
+ skb = alloc_skb(AR2313_BUFSIZE+128, GFP_ATOMIC);
+ if (!skb) {
+ printk("\n\n\n\n %s: No memory in system\n\n\n\n", __FUNCTION__);
+ break;
+ }
+ // partha: create additional room in the front for tx pkt capture
+ skb_reserve(skb, 32);
+
+ /*
+ * Make sure IP header starts on a fresh cache line.
+ */
+ skb->dev = dev;
+ skb_reserve(skb, RX_OFFSET);
+ sp->rx_skb[idx] = skb;
+
+ rd = (ar2313_descr_t *) &sp->rx_ring[idx];
+
+ /* initialize dma descriptor */
+ rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
+ DMA_RX1_CHAINED);
+ rd->addr = virt_to_phys(skb->data);
+ rd->descr = virt_to_phys(&sp->rx_ring[(idx+1) & (AR2313_DESCR_ENTRIES-1)]);
+ rd->status = DMA_RX_OWN;
+
+ idx = DSC_NEXT(idx);
+ }
+
+ if (!i) {
+#if DEBUG_ERR
+ printk(KERN_INFO "Out of memory when allocating standard receive buffers\n");
+#endif /* DEBUG */
+ } else {
+ sp->rx_skbprd = idx;
+ }
+
+ return;
+}
+
+#define AR2313_MAX_PKTS_PER_CALL 64
+
+static int ar2313_rx_int(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ struct sk_buff *skb, *skb_new;
+ ar2313_descr_t *rxdesc;
+ unsigned int status;
+ u32 idx;
+ int pkts = 0;
+ int rval;
+
+ idx = sp->cur_rx;
+
+ /* process at most the entire ring and then wait for another interrupt */
+ while(1) {
+
+ rxdesc = &sp->rx_ring[idx];
+ status = rxdesc->status;
+ if (status & DMA_RX_OWN) {
+ /* SiByte owns descriptor or descr not yet filled in */
+ rval = 0;
+ break;
+ }
+
+ if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
+ rval = 1;
+ break;
+ }
+
+#if DEBUG_RX
+ printk("index %d\n", idx);
+ printk("RX status %08x\n", rxdesc->status);
+ printk("RX devcs %08x\n", rxdesc->devcs );
+ printk("RX addr %08x\n", rxdesc->addr );
+ printk("RX descr %08x\n", rxdesc->descr );
+#endif
+
+ if ((status & (DMA_RX_ERROR|DMA_RX_ERR_LENGTH)) &&
+ (!(status & DMA_RX_LONG))){
+#if DEBUG_RX
+ printk("%s: rx ERROR %08x\n", __FUNCTION__, status);
+#endif
+ sp->stats.rx_errors++;
+ sp->stats.rx_dropped++;
+
+ /* add statistics counters */
+ if (status & DMA_RX_ERR_CRC) sp->stats.rx_crc_errors++;
+ if (status & DMA_RX_ERR_COL) sp->stats.rx_over_errors++;
+ if (status & DMA_RX_ERR_LENGTH)
+ sp->stats.rx_length_errors++;
+ if (status & DMA_RX_ERR_RUNT) sp->stats.rx_over_errors++;
+ if (status & DMA_RX_ERR_DESC) sp->stats.rx_over_errors++;
+
+ } else {
+ /* alloc new buffer. */
+ skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128);
+ if (skb_new != NULL) {
+
+ skb = sp->rx_skb[idx];
+ /* set skb */
+ skb_put(skb, ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
+
+#ifdef CONFIG_MERLOT
+ if ((dev->am_pkt_handler == NULL) ||
+ (dev->am_pkt_handler(skb, dev) == 0)) {
+#endif
+ sp->stats.rx_bytes += skb->len;
+ skb->protocol = eth_type_trans(skb, dev);
+ /* pass the packet to upper layers */
+
+#ifdef CONFIG_MERLOT
+ if (dev->asap_netif_rx)
+ dev->asap_netif_rx(skb);
+ else
+#endif
+ netif_rx(skb);
+#ifdef CONFIG_MERLOT
+ }
+#endif
+ skb_new->dev = dev;
+ /* 16 bit align */
+ skb_reserve(skb_new, RX_OFFSET+32);
+ /* reset descriptor's curr_addr */
+ rxdesc->addr = virt_to_phys(skb_new->data);
+
+ sp->stats.rx_packets++;
+ sp->rx_skb[idx] = skb_new;
+
+ } else {
+ sp->stats.rx_dropped++;
+ }
+ }
+
+ rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
+ DMA_RX1_CHAINED);
+ rxdesc->status = DMA_RX_OWN;
+
+ idx = DSC_NEXT(idx);
+ }
+
+ sp->cur_rx = idx;
+
+ return rval;
+}
+
+
+static void ar2313_tx_int(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ u32 idx;
+ struct sk_buff *skb;
+ ar2313_descr_t *txdesc;
+ unsigned int status=0;
+
+ idx = sp->tx_csm;
+
+ while (idx != sp->tx_prd) {
+
+ txdesc = &sp->tx_ring[idx];
+
+#if DEBUG_TX
+ printk("%s: TXINT: csm=%d idx=%d prd=%d status=%x devcs=%x addr=%08x descr=%x\n",
+ dev->name, sp->tx_csm, idx, sp->tx_prd,
+ txdesc->status, txdesc->devcs, txdesc->addr, txdesc->descr);
+#endif /* DEBUG */
+
+ if ((status = txdesc->status) & DMA_TX_OWN) {
+ /* ar2313 dma still owns descr */
+ break;
+ }
+ /* done with this descriptor */
+ txdesc->status = 0;
+
+ if (status & DMA_TX_ERROR){
+ sp->stats.tx_errors++;
+ sp->stats.tx_dropped++;
+ if(status & DMA_TX_ERR_UNDER)
+ sp->stats.tx_fifo_errors++;
+ if(status & DMA_TX_ERR_HB)
+ sp->stats.tx_heartbeat_errors++;
+ if(status & (DMA_TX_ERR_LOSS |
+ DMA_TX_ERR_LINK))
+ sp->stats.tx_carrier_errors++;
+ if (status & (DMA_TX_ERR_LATE|
+ DMA_TX_ERR_COL |
+ DMA_TX_ERR_JABBER |
+ DMA_TX_ERR_DEFER))
+ sp->stats.tx_aborted_errors++;
+ } else {
+ /* transmit OK */
+ sp->stats.tx_packets++;
+ }
+
+ skb = sp->tx_skb[idx];
+ sp->tx_skb[idx] = NULL;
+ idx = DSC_NEXT(idx);
+ sp->stats.tx_bytes += skb->len;
+ dev_kfree_skb_irq(skb);
+ }
+
+ sp->tx_csm = idx;
+
+ return;
+}
+
+
+static void
+rx_tasklet_func(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct ar2313_private *sp = dev->priv;
+
+ if (sp->unloading) {
+ return;
+ }
+
+ if (ar2313_rx_int(dev)) {
+ tasklet_hi_schedule(&sp->rx_tasklet);
+ }
+ else {
+ unsigned long flags;
+ spin_lock_irqsave(&sp->lock, flags);
+ sp->dma_regs->intr_ena |= DMA_STATUS_RI;
+ spin_unlock_irqrestore(&sp->lock, flags);
+ }
+}
+
+static void
+rx_schedule(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+
+ sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
+
+ tasklet_hi_schedule(&sp->rx_tasklet);
+}
+
+static irqreturn_t ar2313_interrupt(int irq, void *dev_id, struct pt_regs *ptregs)
+{
+ struct net_device *dev = (struct net_device *)dev_id;
+ struct ar2313_private *sp = dev->priv;
+ unsigned int status, enabled;
+
+ /* clear interrupt */
+ /*
+ * Don't clear RI bit if currently disabled.
+ */
+ status = sp->dma_regs->status;
+ enabled = sp->dma_regs->intr_ena;
+ sp->dma_regs->status = status & enabled;
+
+ if (status & DMA_STATUS_NIS) {
+ /* normal status */
+ /*
+ * Don't schedule rx processing if interrupt
+ * is already disabled.
+ */
+ if (status & enabled & DMA_STATUS_RI) {
+ /* receive interrupt */
+ rx_schedule(dev);
+ }
+ if (status & DMA_STATUS_TI) {
+ /* transmit interrupt */
+ ar2313_tx_int(dev);
+ }
+ }
+
+ if (status & DMA_STATUS_AIS) {
+#if DEBUG_INT
+ printk("%s: AIS set %08x & %x\n", __FUNCTION__,
+ status, (DMA_STATUS_FBE | DMA_STATUS_TPS));
+#endif
+ /* abnormal status */
+ if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
+ ar2313_restart(dev);
+ }
+ }
+ return IRQ_RETVAL(0);
+}
+
+
+static int ar2313_open(struct net_device *dev)
+{
+ struct ar2313_private *sp;
+
+ sp = dev->priv;
+
+ dev->mtu = 1500;
+ netif_start_queue(dev);
+
+ sp->eth_regs->mac_control |= MAC_CONTROL_RE;
+
+ AR2313_MOD_INC_USE_COUNT;
+
+ return 0;
+}
+
+static void ar2313_halt(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ int j;
+
+ tasklet_disable(&sp->rx_tasklet);
+
+ /* kill the MAC */
+ sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */
+ MAC_CONTROL_TE); /* disable Transmits */
+ /* stop dma */
+ sp->dma_regs->control = 0;
+ sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
+
+ /* place phy and MAC in reset */
+ *sp->int_regs |= (ar_int_mac_mask | ar_int_phy_mask);
+
+ /* free buffers on tx ring */
+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
+ struct sk_buff *skb;
+ ar2313_descr_t *txdesc;
+
+ txdesc = &sp->tx_ring[j];
+ txdesc->descr = 0;
+
+ skb = sp->tx_skb[j];
+ if (skb) {
+ dev_kfree_skb(skb);
+ sp->tx_skb[j] = NULL;
+ }
+ }
+}
+
+/*
+ * close should do nothing. Here's why. It's called when
+ * 'ifconfig bond0 down' is run. If it calls free_irq then
+ * the irq is gone forever ! When bond0 is made 'up' again,
+ * the ar2313_open () does not call request_irq (). Worse,
+ * the call to ar2313_halt() generates a WDOG reset due to
+ * the write to 'sp->int_regs' and the box reboots.
+ * Commenting this out is good since it allows the
+ * system to resume when bond0 is made up again.
+ */
+static int ar2313_close(struct net_device *dev)
+{
+#if 0
+ /*
+ * Disable interrupts
+ */
+ disable_irq(dev->irq);
+
+ /*
+ * Without (or before) releasing irq and stopping hardware, this
+ * is an absolute non-sense, by the way. It will be reset instantly
+ * by the first irq.
+ */
+ netif_stop_queue(dev);
+
+ /* stop the MAC and DMA engines */
+ ar2313_halt(dev);
+
+ /* release the interrupt */
+ free_irq(dev->irq, dev);
+
+#endif
+ AR2313_MOD_DEC_USE_COUNT;
+ return 0;
+}
+
+static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ ar2313_descr_t *td;
+ u32 idx;
+
+ idx = sp->tx_prd;
+ td = &sp->tx_ring[idx];
+
+ if (td->status & DMA_TX_OWN) {
+#if DEBUG_TX
+ printk("%s: No space left to Tx\n", __FUNCTION__);
+#endif
+ /* free skbuf and lie to the caller that we sent it out */
+ sp->stats.tx_dropped++;
+ dev_kfree_skb(skb);
+
+ /* restart transmitter in case locked */
+ sp->dma_regs->xmt_poll = 0;
+ return 0;
+ }
+
+ /* Setup the transmit descriptor. */
+ td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
+ (DMA_TX1_LS|DMA_TX1_IC|DMA_TX1_CHAINED));
+ td->addr = virt_to_phys(skb->data);
+ td->status = DMA_TX_OWN;
+
+ /* kick transmitter last */
+ sp->dma_regs->xmt_poll = 0;
+
+#if DEBUG_TX
+ printk("index %d\n", idx);
+ printk("TX status %08x\n", td->status);
+ printk("TX devcs %08x\n", td->devcs );
+ printk("TX addr %08x\n", td->addr );
+ printk("TX descr %08x\n", td->descr );
+#endif
+
+ sp->tx_skb[idx] = skb;
+ idx = DSC_NEXT(idx);
+ sp->tx_prd = idx;
+
+ //dev->trans_start = jiffies;
+
+ return 0;
+}
+
+static int netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct ar2313_private *np = dev->priv;
+ u32 tmp;
+
+ ecmd->supported =
+ (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
+ SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII);
+
+ ecmd->port = PORT_TP;
+ /* only supports internal transceiver */
+ ecmd->transceiver = XCVR_INTERNAL;
+ /* not sure what this is for */
+ ecmd->phy_address = 1;
+
+ ecmd->advertising = ADVERTISED_MII;
+ tmp = armiiread(np->phy, MII_ADVERTISE);
+ if (tmp & ADVERTISE_10HALF)
+ ecmd->advertising |= ADVERTISED_10baseT_Half;
+ if (tmp & ADVERTISE_10FULL)
+ ecmd->advertising |= ADVERTISED_10baseT_Full;
+ if (tmp & ADVERTISE_100HALF)
+ ecmd->advertising |= ADVERTISED_100baseT_Half;
+ if (tmp & ADVERTISE_100FULL)
+ ecmd->advertising |= ADVERTISED_100baseT_Full;
+
+ tmp = armiiread(np->phy, MII_BMCR);
+ if (tmp & BMCR_ANENABLE) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ ecmd->autoneg = AUTONEG_ENABLE;
+ } else {
+ ecmd->autoneg = AUTONEG_DISABLE;
+ }
+
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ tmp = armiiread(np->phy, MII_LPA);
+ if (tmp & (LPA_100FULL|LPA_10FULL)) {
+ ecmd->duplex = DUPLEX_FULL;
+ } else {
+ ecmd->duplex = DUPLEX_HALF;
+ }
+ if (tmp & (LPA_100FULL|LPA_100HALF)) {
+ ecmd->speed = SPEED_100;
+ } else {
+ ecmd->speed = SPEED_10;
+ }
+ } else {
+ if (tmp & BMCR_FULLDPLX) {
+ ecmd->duplex = DUPLEX_FULL;
+ } else {
+ ecmd->duplex = DUPLEX_HALF;
+ }
+ if (tmp & BMCR_SPEED100) {
+ ecmd->speed = SPEED_100;
+ } else {
+ ecmd->speed = SPEED_10;
+ }
+ }
+
+ /* ignore maxtxpkt, maxrxpkt for now */
+
+ return 0;
+}
+
+static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct ar2313_private *np = dev->priv;
+ u32 tmp;
+
+ if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100)
+ return -EINVAL;
+ if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
+ return -EINVAL;
+ if (ecmd->port != PORT_TP)
+ return -EINVAL;
+ if (ecmd->transceiver != XCVR_INTERNAL)
+ return -EINVAL;
+ if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE)
+ return -EINVAL;
+ /* ignore phy_address, maxtxpkt, maxrxpkt for now */
+
+ /* WHEW! now lets bang some bits */
+
+ tmp = armiiread(np->phy, MII_BMCR);
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ /* turn on autonegotiation */
+ tmp |= BMCR_ANENABLE;
+ printk("%s: Enabling auto-neg\n", dev->name);
+ } else {
+ /* turn off auto negotiation, set speed and duplexity */
+ tmp &= ~(BMCR_ANENABLE | BMCR_SPEED100 | BMCR_FULLDPLX);
+ if (ecmd->speed == SPEED_100)
+ tmp |= BMCR_SPEED100;
+ if (ecmd->duplex == DUPLEX_FULL)
+ tmp |= BMCR_FULLDPLX;
+ printk("%s: Hard coding %d/%s\n", dev->name,
+ (ecmd->speed == SPEED_100)? 100:10,
+ (ecmd->duplex == DUPLEX_FULL)? "full":"half");
+ }
+ armiiwrite(np->phy, MII_BMCR, tmp);
+ np->phyData = 0;
+ return 0;
+}
+
+static int netdev_ethtool_ioctl(struct net_device *dev, void *useraddr)
+{
+ struct ar2313_private *np = dev->priv;
+ u32 cmd;
+
+ if (get_user(cmd, (u32 *)useraddr))
+ return -EFAULT;
+
+ switch (cmd) {
+ /* get settings */
+ case ETHTOOL_GSET: {
+ struct ethtool_cmd ecmd = { ETHTOOL_GSET };
+ spin_lock_irq(&np->lock);
+ netdev_get_ecmd(dev, &ecmd);
+ spin_unlock_irq(&np->lock);
+ if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
+ return -EFAULT;
+ return 0;
+ }
+ /* set settings */
+ case ETHTOOL_SSET: {
+ struct ethtool_cmd ecmd;
+ int r;
+ if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
+ return -EFAULT;
+ spin_lock_irq(&np->lock);
+ r = netdev_set_ecmd(dev, &ecmd);
+ spin_unlock_irq(&np->lock);
+ return r;
+ }
+ /* restart autonegotiation */
+ case ETHTOOL_NWAY_RST: {
+ int tmp;
+ int r = -EINVAL;
+ /* if autoneg is off, it's an error */
+ tmp = armiiread(np->phy, MII_BMCR);
+ if (tmp & BMCR_ANENABLE) {
+ tmp |= (BMCR_ANRESTART);
+ armiiwrite(np->phy, MII_BMCR, tmp);
+ r = 0;
+ }
+ return r;
+ }
+ /* get link status */
+ case ETHTOOL_GLINK: {
+ struct ethtool_value edata = {ETHTOOL_GLINK};
+ edata.data = (armiiread(np->phy, MII_BMSR)&BMSR_LSTATUS) ? 1:0;
+ if (copy_to_user(useraddr, &edata, sizeof(edata)))
+ return -EFAULT;
+ return 0;
+ }
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct mii_ioctl_data *data = (struct mii_ioctl_data *)&ifr->ifr_data;
+
+ switch (cmd) {
+ case SIOCDEVPRIVATE: {
+ struct ar2313_cmd scmd;
+
+ if (copy_from_user(&scmd, ifr->ifr_data, sizeof(scmd)))
+ return -EFAULT;
+
+#if DEBUG
+ printk("%s: ioctl devprivate c=%d a=%x l=%d m=%d d=%x,%x\n",
+ dev->name, scmd.cmd,
+ scmd.address, scmd.length,
+ scmd.mailbox, scmd.data[0], scmd.data[1]);
+#endif /* DEBUG */
+
+ switch (scmd.cmd) {
+ case AR2313_READ_DATA:
+ if(scmd.length==4){
+ scmd.data[0] = *((u32*)scmd.address);
+ } else if(scmd.length==2) {
+ scmd.data[0] = *((u16*)scmd.address);
+ } else if (scmd.length==1) {
+ scmd.data[0] = *((u8*)scmd.address);
+ } else {
+ return -EOPNOTSUPP;
+ }
+ if(copy_to_user(ifr->ifr_data, &scmd, sizeof(scmd)))
+ return -EFAULT;
+ break;
+
+ case AR2313_WRITE_DATA:
+ if(scmd.length==4){
+ *((u32*)scmd.address) = scmd.data[0];
+ } else if(scmd.length==2) {
+ *((u16*)scmd.address) = scmd.data[0];
+ } else if (scmd.length==1) {
+ *((u8*)scmd.address) = scmd.data[0];
+ } else {
+ return -EOPNOTSUPP;
+ }
+ break;
+
+ case AR2313_GET_VERSION:
+ // SAMEER: sprintf((char*) &scmd, "%s", ARUBA_VERSION);
+ if(copy_to_user(ifr->ifr_data, &scmd, sizeof(scmd)))
+ return -EFAULT;
+ break;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+ }
+
+ case SIOCETHTOOL:
+ return netdev_ethtool_ioctl(dev, (void *) ifr->ifr_data);
+
+ case SIOCGMIIPHY: /* Get address of MII PHY in use. */
+ data->phy_id = 1;
+ /* Fall Through */
+
+ case SIOCGMIIREG: /* Read MII PHY register. */
+ case SIOCDEVPRIVATE+1: /* for binary compat, remove in 2.5 */
+ data->val_out = armiiread(data->phy_id & 0x1f,
+ data->reg_num & 0x1f);
+ return 0;
+ case SIOCSMIIREG: /* Write MII PHY register. */
+ case SIOCDEVPRIVATE+2: /* for binary compat, remove in 2.5 */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ armiiwrite(data->phy_id & 0x1f,
+ data->reg_num & 0x1f, data->val_in);
+ return 0;
+
+ case SIOCSIFHWADDR:
+ if (copy_from_user(dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
+ return -EFAULT;
+ return 0;
+
+ case SIOCGIFHWADDR:
+ if (copy_to_user(ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
+ return -EFAULT;
+ return 0;
+
+ default:
+ break;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static struct net_device_stats *ar2313_get_stats(struct net_device *dev)
+{
+ struct ar2313_private *sp = dev->priv;
+ return &sp->stats;
+}
+
+static short
+armiiread(short phy, short reg)
+{
+ volatile ETHERNET_STRUCT * ethernet;
+
+ ethernet = (volatile ETHERNET_STRUCT *)ETHERNET_BASE; /* always MAC 0 */
+ ethernet->mii_addr = ((reg << MII_ADDR_REG_SHIFT) |
+ (phy << MII_ADDR_PHY_SHIFT));
+ while (ethernet->mii_addr & MII_ADDR_BUSY);
+ return (ethernet->mii_data >> MII_DATA_SHIFT);
+}
+
+static void
+armiiwrite(short phy, short reg, short data)
+{
+ volatile ETHERNET_STRUCT * ethernet;
+
+ ethernet = (volatile ETHERNET_STRUCT *)ETHERNET_BASE; /* always MAC 0 */
+ while (ethernet->mii_addr & MII_ADDR_BUSY);
+ ethernet->mii_data = data << MII_DATA_SHIFT;
+ ethernet->mii_addr = ((reg << MII_ADDR_REG_SHIFT) |
+ (phy << MII_ADDR_PHY_SHIFT) |
+ MII_ADDR_WRITE);
+}
+
View Git Blame Copy Permalink