qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-16 14:17:11 +02:00
Code
b1bfec83f7
openwrt-xburst/target/linux/atheros/patches-2.6.28/100-board.patch
agb 1bb61233b7 [atheros] export ar231x_gpiodev, needed for gpio-led/spi/i2c modules 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16902 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-18 17:52:36 +00:00

3125 lines
92 KiB
Diff
Raw Blame History

--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -60,6 +60,19 @@ config BCM47XX
help
Support for BCM47XX based boards
+config ATHEROS
+ bool "Atheros 231x/531x SoC support"
+ select CEVT_R4K
+ select CSRC_R4K
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select GENERIC_GPIO
+ help
+ Support for AR231x and AR531x based boards
+
config MIPS_COBALT
bool "Cobalt Server"
select CEVT_R4K
@@ -597,6 +610,7 @@ config WR_PPMC
endchoice
+source "arch/mips/ar231x/Kconfig"
source "arch/mips/alchemy/Kconfig"
source "arch/mips/basler/excite/Kconfig"
source "arch/mips/emma/Kconfig"
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -278,6 +278,13 @@ libs-$(CONFIG_MIPS_XXS1500) += arch/mips
load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000
#
+# Atheros AR5312/AR2312 WiSoC
+#
+core-$(CONFIG_ATHEROS) += arch/mips/ar231x/
+cflags-$(CONFIG_ATHEROS) += -I$(srctree)/arch/mips/include/asm/mach-ar231x
+load-$(CONFIG_ATHEROS) += 0xffffffff80041000
+
+#
# Cobalt Server
#
core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/
--- /dev/null
+++ b/arch/mips/ar231x/Kconfig
@@ -0,0 +1,17 @@
+config ATHEROS_AR5312
+ bool "Atheros 5312/2312+ support"
+ depends on ATHEROS
+ default y
+
+config ATHEROS_AR2315
+ bool "Atheros 2315+ support"
+ depends on ATHEROS
+ select DMA_NONCOHERENT
+ select CEVT_R4K
+ select CSRC_R4K
+ select IRQ_CPU
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select GENERIC_GPIO
+ default y
--- /dev/null
+++ b/arch/mips/ar231x/Makefile
@@ -0,0 +1,13 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2006 FON Technology, SL.
+# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+# Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+#
+
+obj-y += board.o prom.o devices.o
+obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
+obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
--- /dev/null
+++ b/arch/mips/ar231x/board.c
@@ -0,0 +1,249 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/random.h>
+#include <linux/etherdevice.h>
+#include <asm/irq_cpu.h>
+#include <asm/reboot.h>
+#include <asm/io.h>
+
+#include <ar231x_platform.h>
+#include "devices.h"
+#include "ar5312.h"
+#include "ar2315.h"
+
+void (*ar231x_irq_dispatch)(void);
+
+static inline bool
+check_radio_magic(u8 *addr)
+{
+ addr += 0x7a; /* offset for flash magic */
+ if ((addr[0] == 0x5a) && (addr[1] == 0xa5)) {
+ return 1;
+ }
+ return 0;
+}
+
+static inline bool
+check_board_data(u8 *flash_limit, u8 *addr, bool broken)
+{
+ /* config magic found */
+ if (*((u32 *)addr) == AR531X_BD_MAGIC)
+ return 1;
+
+ if (!broken)
+ return 0;
+
+ if (check_radio_magic(addr + 0xf8))
+ ar231x_board.radio = addr + 0xf8;
+ if ((addr < flash_limit + 0x10000) &&
+ check_radio_magic(addr + 0x10000))
+ ar231x_board.radio = addr + 0x10000;
+
+ if (ar231x_board.radio) {
+ /* broken board data detected, use radio data to find the offset,
+ * user will fix this */
+ return 1;
+ }
+ return 0;
+}
+
+static u8 *
+find_board_config(u8 *flash_limit, bool broken)
+{
+ u8 *addr;
+ int found = 0;
+
+ for (addr = flash_limit - 0x1000;
+ addr >= flash_limit - 0x30000;
+ addr -= 0x1000) {
+
+ if (check_board_data(flash_limit, addr, broken)) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (!found)
+ addr = NULL;
+
+ return addr;
+}
+
+static u8 *
+find_radio_config(u8 *flash_limit, u8 *board_config)
+{
+ int found;
+ u8 *radio_config;
+
+ /*
+ * Now find the start of Radio Configuration data, using heuristics:
+ * Search forward from Board Configuration data by 0x1000 bytes
+ * at a time until we find non-0xffffffff.
+ */
+ found = 0;
+ for (radio_config = board_config + 0x1000;
+ (radio_config < flash_limit);
+ radio_config += 0x1000) {
+ if ((*(u32 *)radio_config != 0xffffffff) &&
+ check_radio_magic(radio_config)) {
+ found = 1;
+ break;
+ }
+ }
+
+ /* AR2316 relocates radio config to new location */
+ if (!found) {
+ for (radio_config = board_config + 0xf8;
+ (radio_config < flash_limit - 0x1000 + 0xf8);
+ radio_config += 0x1000) {
+ if ((*(u32 *)radio_config != 0xffffffff) &&
+ check_radio_magic(radio_config)) {
+ found = 1;
+ break;
+ }
+ }
+ }
+
+ if (!found) {
+ printk("Could not find Radio Configuration data\n");
+ radio_config = 0;
+ }
+
+ return (u8 *) radio_config;
+}
+
+int __init
+ar231x_find_config(u8 *flash_limit)
+{
+ struct ar231x_boarddata *config;
+ unsigned int rcfg_size;
+ int broken_boarddata = 0;
+ u8 *bcfg, *rcfg;
+ u8 *board_data;
+ u8 *radio_data;
+ u32 offset;
+
+ ar231x_board.config = NULL;
+ ar231x_board.radio = NULL;
+ /* Copy the board and radio data to RAM, because accessing the mapped
+ * memory of the flash directly after booting is not safe */
+
+ /* Try to find valid board and radio data */
+ bcfg = find_board_config(flash_limit, false);
+
+ /* If that fails, try to at least find valid radio data */
+ if (!bcfg) {
+ bcfg = find_board_config(flash_limit, true);
+ broken_boarddata = 1;
+ }
+
+ if (!bcfg) {
+ printk(KERN_WARNING "WARNING: No board configuration data found!\n");
+ return -ENODEV;
+ }
+
+ board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
+ ar231x_board.config = (struct ar231x_boarddata *) board_data;
+ memcpy(board_data, bcfg, 0x100);
+ if (broken_boarddata) {
+ printk(KERN_WARNING "WARNING: broken board data detected\n");
+ config = ar231x_board.config;
+ if (!memcmp(config->enet0_mac, "\x00\x00\x00\x00\x00\x00", 6)) {
+ printk(KERN_INFO "Fixing up empty mac addresses\n");
+ random_ether_addr(config->wlan0_mac);
+ config->wlan0_mac[0] &= ~0x06;
+ random_ether_addr(config->enet0_mac);
+ random_ether_addr(config->enet1_mac);
+ }
+ }
+
+
+ /* Radio config starts 0x100 bytes after board config, regardless
+ * of what the physical layout on the flash chip looks like */
+
+ if (ar231x_board.radio)
+ rcfg = (u8 *) ar231x_board.radio;
+ else
+ rcfg = find_radio_config(flash_limit, bcfg);
+
+ if (!rcfg)
+ return -ENODEV;
+
+ radio_data = board_data + 0x100 + ((rcfg - bcfg) & 0xfff);
+ ar231x_board.radio = radio_data;
+ offset = radio_data - board_data;
+ printk(KERN_INFO "Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, offset);
+ rcfg_size = BOARD_CONFIG_BUFSZ - offset;
+ memcpy(radio_data, rcfg, rcfg_size);
+
+ return 0;
+}
+
+static void
+ar231x_halt(void)
+{
+ local_irq_disable();
+ while (1);
+}
+
+void __init
+plat_mem_setup(void)
+{
+ _machine_halt = ar231x_halt;
+ pm_power_off = ar231x_halt;
+
+ ar5312_plat_setup();
+ ar2315_plat_setup();
+
+ /* Disable data watchpoints */
+ write_c0_watchlo0(0);
+}
+
+
+asmlinkage void
+plat_irq_dispatch(void)
+{
+ ar231x_irq_dispatch();
+}
+
+void __init
+plat_time_init(void)
+{
+ ar5312_time_init();
+ ar2315_time_init();
+}
+
+unsigned int __cpuinit
+get_c0_compare_irq(void)
+{
+ return CP0_LEGACY_COMPARE_IRQ;
+}
+
+void __init
+arch_init_irq(void)
+{
+ clear_c0_status(ST0_IM);
+ mips_cpu_irq_init();
+
+ /* Initialize interrupt controllers */
+ ar5312_irq_init();
+ ar2315_irq_init();
+}
+
+
--- /dev/null
+++ b/arch/mips/ar231x/prom.c
@@ -0,0 +1,37 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright MontaVista Software Inc
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Prom setup file for ar531x
+ */
+
+#include <linux/init.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+#include "ar5312.h"
+#include "ar2315.h"
+
+void __init prom_init(void)
+{
+ ar5312_prom_init();
+ ar2315_prom_init();
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/ar231x_platform.h
@@ -0,0 +1,83 @@
+#ifndef __AR531X_PLATFORM_H
+#define __AR531X_PLATFORM_H
+
+/*
+ * This is board-specific data that is stored in a "fixed" location in flash.
+ * It is shared across operating systems, so it should not be changed lightly.
+ * The main reason we need it is in order to extract the ethernet MAC
+ * address(es).
+ */
+struct ar231x_boarddata {
+ u32 magic; /* board data is valid */
+#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */
+ u16 cksum; /* checksum (starting with BD_REV 2) */
+ u16 rev; /* revision of this struct */
+#define BD_REV 4
+ char boardName[64]; /* Name of board */
+ u16 major; /* Board major number */
+ u16 minor; /* Board minor number */
+ u32 flags; /* Board configuration */
+#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
+#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
+#define BD_UART1 0x00000004 /* UART1 is stuffed */
+#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
+#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
+#define BD_SYSLED 0x00000020 /* System LED stuffed */
+#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
+#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
+#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
+#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
+#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */
+#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
+#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
+#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
+#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
+#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
+#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
+#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
+ u16 resetConfigGpio; /* Reset factory GPIO pin */
+ u16 sysLedGpio; /* System LED GPIO pin */
+
+ u32 cpuFreq; /* CPU core frequency in Hz */
+ u32 sysFreq; /* System frequency in Hz */
+ u32 cntFreq; /* Calculated C0_COUNT frequency */
+
+ u8 wlan0_mac[6];
+ u8 enet0_mac[6];
+ u8 enet1_mac[6];
+
+ u16 pciId; /* Pseudo PCIID for common code */
+ u16 memCap; /* cap bank1 in MB */
+
+ /* version 3 */
+ u8 wlan1_mac[6]; /* (ar5212) */
+};
+
+#define BOARD_CONFIG_BUFSZ 0x1000
+
+/*
+ * Platform device information for the Wireless MAC
+ */
+struct ar231x_board_config {
+ u16 devid;
+
+ /* board config data */
+ struct ar231x_boarddata *config;
+
+ /* radio calibration data */
+ const char *radio;
+};
+
+/*
+ * Platform device information for the Ethernet MAC
+ */
+struct ar231x_eth {
+ u32 reset_base;
+ u32 reset_mac;
+ u32 reset_phy;
+ u32 phy_base;
+ struct ar231x_board_config *config;
+ char *macaddr;
+};
+
+#endif /* __AR531X_PLATFORM_H */
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/cpu-feature-overrides.h
@@ -0,0 +1,84 @@
+/*
+ * Atheros SoC specific CPU feature overrides
+ *
+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was derived from: include/asm-mips/cpu-features.h
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2004 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * The ATHEROS SoCs have MIPS 4Kc/4KEc core.
+ */
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_tx39_cache 0
+#define cpu_has_sb1_cache 0
+#define cpu_has_fpu 0
+#define cpu_has_32fpr 0
+#define cpu_has_counter 1
+/* #define cpu_has_watch ? */
+/* #define cpu_has_divec ? */
+/* #define cpu_has_vce ? */
+/* #define cpu_has_cache_cdex_p ? */
+/* #define cpu_has_cache_cdex_s ? */
+/* #define cpu_has_prefetch ? */
+/* #define cpu_has_mcheck ? */
+#define cpu_has_ejtag 1
+
+#if !defined(CONFIG_ATHEROS_AR5312)
+# define cpu_has_llsc 1
+#else
+/*
+ * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the
+ * ll/sc instructions.
+ */
+# define cpu_has_llsc 0
+#endif
+
+#define cpu_has_mips16 0
+#define cpu_has_mdmx 0
+#define cpu_has_mips3d 0
+#define cpu_has_smartmips 0
+
+/* #define cpu_has_vtag_icache ? */
+/* #define cpu_has_dc_aliases ? */
+/* #define cpu_has_ic_fills_f_dc ? */
+/* #define cpu_has_pindexed_dcache ? */
+
+/* #define cpu_icache_snoops_remote_store ? */
+
+#define cpu_has_mips32r1 1
+
+#if !defined(CONFIG_ATHEROS_AR5312)
+# define cpu_has_mips32r2 1
+#endif
+
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#define cpu_has_dsp 0
+#define cpu_has_mipsmt 0
+
+/* #define cpu_has_nofpuex ? */
+#define cpu_has_64bits 0
+#define cpu_has_64bit_zero_reg 0
+#define cpu_has_64bit_gp_regs 0
+#define cpu_has_64bit_addresses 0
+
+/* #define cpu_has_inclusive_pcaches ? */
+
+/* #define cpu_dcache_line_size() ? */
+/* #define cpu_icache_line_size() ? */
+
+#endif /* __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H */
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/dma-coherence.h
@@ -0,0 +1,41 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ *
+ */
+#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H
+#define __ASM_MACH_GENERIC_DMA_COHERENCE_H
+
+#define PCI_DMA_OFFSET 0x20000000
+
+struct device;
+
+static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
+{
+ return virt_to_phys(addr) + (dev != NULL ? PCI_DMA_OFFSET : 0);
+}
+
+static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
+{
+ return page_to_phys(page) + (dev != NULL ? PCI_DMA_OFFSET : 0);
+}
+
+static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+ return (dma_addr > PCI_DMA_OFFSET ? dma_addr - PCI_DMA_OFFSET : dma_addr);
+}
+
+static void plat_unmap_dma_mem(dma_addr_t dma_addr)
+{
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+ return 0;
+}
+
+#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/gpio.h
@@ -0,0 +1,79 @@
+#ifndef _ATHEROS_GPIO_H_
+#define _ATHEROS_GPIO_H_
+
+#include <ar231x.h>
+
+struct ar231x_gpiodev {
+ u32 valid_mask;
+ u32 (*get_output)(void);
+ u32 (*set_output)(u32 mask, u32 val);
+ u32 (*get)(void);
+ u32 (*set)(u32 mask, u32 val);
+};
+
+extern const struct ar231x_gpiodev *ar231x_gpiodev;
+
+/*
+ * Wrappers for the generic GPIO layer
+ */
+
+static inline int gpio_direction_input(unsigned gpio) {
+ u32 mask = 1 << gpio;
+
+ if (!(ar231x_gpiodev->valid_mask & mask))
+ return -ENXIO;
+
+ ar231x_gpiodev->set_output(mask, 0);
+ return 0;
+}
+
+static inline void gpio_set_value(unsigned gpio, int value) {
+ u32 mask = 1 << gpio;
+
+ if (!(ar231x_gpiodev->valid_mask & mask))
+ return;
+
+ ar231x_gpiodev->set(mask, (!!value) * mask);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value) {
+ u32 mask = 1 << gpio;
+
+ if (!(ar231x_gpiodev->valid_mask & mask))
+ return -ENXIO;
+
+ ar231x_gpiodev->set_output(mask, mask);
+ ar231x_gpiodev->set(mask, (!!value) * mask);
+ return 0;
+}
+
+/* Reads the gpio pin. Unchecked function */
+static inline int gpio_get_value(unsigned gpio) {
+ u32 mask = 1 << gpio;
+
+ if (!(ar231x_gpiodev->valid_mask & mask))
+ return 0;
+
+ return !!(ar231x_gpiodev->get() & mask);
+}
+
+static inline int gpio_request(unsigned gpio, const char *label) {
+ return 0;
+}
+
+static inline void gpio_free(unsigned gpio) {
+}
+
+/* Returns IRQ to attach for gpio. Unchecked function */
+static inline int gpio_to_irq(unsigned gpio) {
+ return AR531X_GPIO_IRQ(gpio);
+}
+
+/* Returns gpio for IRQ attached. Unchecked function */
+static inline int irq_to_gpio(unsigned irq) {
+ return (irq - (AR531X_GPIO_IRQ(0)));
+}
+
+#include <asm-generic/gpio.h> /* cansleep wrappers */
+
+#endif
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/reset.h
@@ -0,0 +1,6 @@
+#ifndef __AR531X_RESET_H
+#define __AR531X_RESET_H
+
+void ar531x_disable_reset_button(void);
+
+#endif /* __AR531X_RESET_H */
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
+ */
+#ifndef __ASM_MIPS_MACH_ATHEROS_WAR_H
+#define __ASM_MIPS_MACH_ATHEROS_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_ATHEROS_WAR_H */
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/ar2315_regs.h
@@ -0,0 +1,580 @@
+/*
+ * Register definitions for AR2315+
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2008 Felix Fietkau <nbd@openwrt.org>
+ */
+
+#ifndef __AR2315_REG_H
+#define __AR2315_REG_H
+
+/*
+ * IRQs
+ */
+#define AR2315_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
+#define AR2315_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
+#define AR2315_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
+#define AR2315_IRQ_LCBUS_PCI MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
+#define AR2315_IRQ_WLAN0_POLL MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
+
+/*
+ * Address map
+ */
+#define AR2315_SPI_READ 0x08000000 /* SPI FLASH */
+#define AR2315_WLAN0 0xB0000000 /* Wireless MMR */
+#define AR2315_PCI 0xB0100000 /* PCI MMR */
+#define AR2315_SDRAMCTL 0xB0300000 /* SDRAM MMR */
+#define AR2315_LOCAL 0xB0400000 /* LOCAL BUS MMR */
+#define AR2315_ENET0 0xB0500000 /* ETHERNET MMR */
+#define AR2315_DSLBASE 0xB1000000 /* RESET CONTROL MMR */
+#define AR2315_UART0 0xB1100003 /* UART MMR */
+#define AR2315_SPI 0xB1300000 /* SPI FLASH MMR */
+#define AR2315_PCIEXT 0x80000000 /* pci external */
+
+/*
+ * Reset Register
+ */
+#define AR2315_COLD_RESET (AR2315_DSLBASE + 0x0000)
+
+#define AR2315_RESET_COLD_AHB 0x00000001
+#define AR2315_RESET_COLD_APB 0x00000002
+#define AR2315_RESET_COLD_CPU 0x00000004
+#define AR2315_RESET_COLD_CPUWARM 0x00000008
+#define AR2315_RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */
+#define AR2317_RESET_SYSTEM 0x00000010
+
+
+#define AR2315_RESET (AR2315_DSLBASE + 0x0004)
+
+#define AR2315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */
+#define AR2315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */
+#define AR2315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */
+#define AR2315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */
+#define AR2315_RESET_MEMCTL 0x00000010 /* warm reset memory controller */
+#define AR2315_RESET_LOCAL 0x00000020 /* warm reset local bus */
+#define AR2315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */
+#define AR2315_RESET_SPI 0x00000080 /* warm reset SPI interface */
+#define AR2315_RESET_UART0 0x00000100 /* warm reset UART0 */
+#define AR2315_RESET_IR_RSVD 0x00000200 /* warm reset IR interface */
+#define AR2315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */
+#define AR2315_RESET_ENET0 0x00000800 /* cold reset ENET0 mac */
+
+/*
+ * AHB master arbitration control
+ */
+#define AR2315_AHB_ARB_CTL (AR2315_DSLBASE + 0x0008)
+
+#define AR2315_ARB_CPU 0x00000001 /* CPU, default */
+#define AR2315_ARB_WLAN 0x00000002 /* WLAN */
+#define AR2315_ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */
+#define AR2315_ARB_LOCAL 0x00000008 /* LOCAL */
+#define AR2315_ARB_PCI 0x00000010 /* PCI */
+#define AR2315_ARB_ETHERNET 0x00000020 /* Ethernet */
+#define AR2315_ARB_RETRY 0x00000100 /* retry policy, debug only */
+
+/*
+ * Config Register
+ */
+#define AR2315_ENDIAN_CTL (AR2315_DSLBASE + 0x000c)
+
+#define AR2315_CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */
+#define AR2315_CONFIG_WLAN 0x00000002 /* WLAN byteswap */
+#define AR2315_CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */
+#define AR2315_CONFIG_PCI 0x00000008 /* PCI byteswap */
+#define AR2315_CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */
+#define AR2315_CONFIG_LOCAL 0x00000020 /* Local bus byteswap */
+#define AR2315_CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */
+
+#define AR2315_CONFIG_MERGE 0x00000200 /* CPU write buffer merge */
+#define AR2315_CONFIG_CPU 0x00000400 /* CPU big endian */
+#define AR2315_CONFIG_PCIAHB 0x00000800
+#define AR2315_CONFIG_PCIAHB_BRIDGE 0x00001000
+#define AR2315_CONFIG_SPI 0x00008000 /* SPI byteswap */
+#define AR2315_CONFIG_CPU_DRAM 0x00010000
+#define AR2315_CONFIG_CPU_PCI 0x00020000
+#define AR2315_CONFIG_CPU_MMR 0x00040000
+#define AR2315_CONFIG_BIG 0x00000400
+
+
+/*
+ * NMI control
+ */
+#define AR2315_NMI_CTL (AR2315_DSLBASE + 0x0010)
+
+#define AR2315_NMI_EN 1
+
+/*
+ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0).
+ */
+#define AR2315_SREV (AR2315_DSLBASE + 0x0014)
+
+#define AR2315_REV_MAJ 0x00f0
+#define AR2315_REV_MAJ_S 4
+#define AR2315_REV_MIN 0x000f
+#define AR2315_REV_MIN_S 0
+#define AR2315_REV_CHIP (AR2315_REV_MAJ|AR2315_REV_MIN)
+
+/*
+ * Interface Enable
+ */
+#define AR2315_IF_CTL (AR2315_DSLBASE + 0x0018)
+
+#define AR2315_IF_MASK 0x00000007
+#define AR2315_IF_DISABLED 0
+#define AR2315_IF_PCI 1
+#define AR2315_IF_TS_LOCAL 2
+#define AR2315_IF_ALL 3 /* only for emulation with separate pins */
+#define AR2315_IF_LOCAL_HOST 0x00000008
+#define AR2315_IF_PCI_HOST 0x00000010
+#define AR2315_IF_PCI_INTR 0x00000020
+#define AR2315_IF_PCI_CLK_MASK 0x00030000
+#define AR2315_IF_PCI_CLK_INPUT 0
+#define AR2315_IF_PCI_CLK_OUTPUT_LOW 1
+#define AR2315_IF_PCI_CLK_OUTPUT_CLK 2
+#define AR2315_IF_PCI_CLK_OUTPUT_HIGH 3
+#define AR2315_IF_PCI_CLK_SHIFT 16
+
+/*
+ * APB Interrupt control
+ */
+
+#define AR2315_ISR (AR2315_DSLBASE + 0x0020)
+#define AR2315_IMR (AR2315_DSLBASE + 0x0024)
+#define AR2315_GISR (AR2315_DSLBASE + 0x0028)
+
+#define AR2315_ISR_UART0 0x0001 /* high speed UART */
+#define AR2315_ISR_I2C_RSVD 0x0002 /* I2C bus */
+#define AR2315_ISR_SPI 0x0004 /* SPI bus */
+#define AR2315_ISR_AHB 0x0008 /* AHB error */
+#define AR2315_ISR_APB 0x0010 /* APB error */
+#define AR2315_ISR_TIMER 0x0020 /* timer */
+#define AR2315_ISR_GPIO 0x0040 /* GPIO */
+#define AR2315_ISR_WD 0x0080 /* watchdog */
+#define AR2315_ISR_IR_RSVD 0x0100 /* IR */
+
+#define AR2315_GISR_MISC 0x0001
+#define AR2315_GISR_WLAN0 0x0002
+#define AR2315_GISR_MPEGTS_RSVD 0x0004
+#define AR2315_GISR_LOCALPCI 0x0008
+#define AR2315_GISR_WMACPOLL 0x0010
+#define AR2315_GISR_TIMER 0x0020
+#define AR2315_GISR_ETHERNET 0x0040
+
+/*
+ * Interrupt routing from IO to the processor IP bits
+ * Define our inter mask and level
+ */
+#define AR2315_INTR_MISCIO SR_IBIT3
+#define AR2315_INTR_WLAN0 SR_IBIT4
+#define AR2315_INTR_ENET0 SR_IBIT5
+#define AR2315_INTR_LOCALPCI SR_IBIT6
+#define AR2315_INTR_WMACPOLL SR_IBIT7
+#define AR2315_INTR_COMPARE SR_IBIT8
+
+/*
+ * Timers
+ */
+#define AR2315_TIMER (AR2315_DSLBASE + 0x0030)
+#define AR2315_RELOAD (AR2315_DSLBASE + 0x0034)
+#define AR2315_WD (AR2315_DSLBASE + 0x0038)
+#define AR2315_WDC (AR2315_DSLBASE + 0x003c)
+
+#define AR2315_WDC_IGNORE_EXPIRATION 0x00000000
+#define AR2315_WDC_NMI 0x00000001 /* NMI on watchdog */
+#define AR2315_WDC_RESET 0x00000002 /* reset on watchdog */
+
+/*
+ * CPU Performance Counters
+ */
+#define AR2315_PERFCNT0 (AR2315_DSLBASE + 0x0048)
+#define AR2315_PERFCNT1 (AR2315_DSLBASE + 0x004c)
+
+#define AR2315_PERF0_DATAHIT 0x0001 /* Count Data Cache Hits */
+#define AR2315_PERF0_DATAMISS 0x0002 /* Count Data Cache Misses */
+#define AR2315_PERF0_INSTHIT 0x0004 /* Count Instruction Cache Hits */
+#define AR2315_PERF0_INSTMISS 0x0008 /* Count Instruction Cache Misses */
+#define AR2315_PERF0_ACTIVE 0x0010 /* Count Active Processor Cycles */
+#define AR2315_PERF0_WBHIT 0x0020 /* Count CPU Write Buffer Hits */
+#define AR2315_PERF0_WBMISS 0x0040 /* Count CPU Write Buffer Misses */
+
+#define AR2315_PERF1_EB_ARDY 0x0001 /* Count EB_ARdy signal */
+#define AR2315_PERF1_EB_AVALID 0x0002 /* Count EB_AValid signal */
+#define AR2315_PERF1_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */
+#define AR2315_PERF1_EB_RDVAL 0x0008 /* Count EB_RdVal signal */
+#define AR2315_PERF1_VRADDR 0x0010 /* Count valid read address cycles */
+#define AR2315_PERF1_VWADDR 0x0020 /* Count valid write address cycles */
+#define AR2315_PERF1_VWDATA 0x0040 /* Count valid write data cycles */
+
+/*
+ * AHB Error Reporting.
+ */
+#define AR2315_AHB_ERR0 (AR2315_DSLBASE + 0x0050) /* error */
+#define AR2315_AHB_ERR1 (AR2315_DSLBASE + 0x0054) /* haddr */
+#define AR2315_AHB_ERR2 (AR2315_DSLBASE + 0x0058) /* hwdata */
+#define AR2315_AHB_ERR3 (AR2315_DSLBASE + 0x005c) /* hrdata */
+#define AR2315_AHB_ERR4 (AR2315_DSLBASE + 0x0060) /* status */
+
+#define AHB_ERROR_DET 1 /* AHB Error has been detected, */
+ /* write 1 to clear all bits in ERR0 */
+#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */
+#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */
+
+#define AR2315_PROCERR_HMAST 0x0000000f
+#define AR2315_PROCERR_HMAST_DFLT 0
+#define AR2315_PROCERR_HMAST_WMAC 1
+#define AR2315_PROCERR_HMAST_ENET 2
+#define AR2315_PROCERR_HMAST_PCIENDPT 3
+#define AR2315_PROCERR_HMAST_LOCAL 4
+#define AR2315_PROCERR_HMAST_CPU 5
+#define AR2315_PROCERR_HMAST_PCITGT 6
+
+#define AR2315_PROCERR_HMAST_S 0
+#define AR2315_PROCERR_HWRITE 0x00000010
+#define AR2315_PROCERR_HSIZE 0x00000060
+#define AR2315_PROCERR_HSIZE_S 5
+#define AR2315_PROCERR_HTRANS 0x00000180
+#define AR2315_PROCERR_HTRANS_S 7
+#define AR2315_PROCERR_HBURST 0x00000e00
+#define AR2315_PROCERR_HBURST_S 9
+
+/*
+ * Clock Control
+ */
+#define AR2315_PLLC_CTL (AR2315_DSLBASE + 0x0064)
+#define AR2315_PLLV_CTL (AR2315_DSLBASE + 0x0068)
+#define AR2315_CPUCLK (AR2315_DSLBASE + 0x006c)
+#define AR2315_AMBACLK (AR2315_DSLBASE + 0x0070)
+#define AR2315_SYNCCLK (AR2315_DSLBASE + 0x0074)
+#define AR2315_DSL_SLEEP_CTL (AR2315_DSLBASE + 0x0080)
+#define AR2315_DSL_SLEEP_DUR (AR2315_DSLBASE + 0x0084)
+
+/* PLLc Control fields */
+#define PLLC_REF_DIV_M 0x00000003
+#define PLLC_REF_DIV_S 0
+#define PLLC_FDBACK_DIV_M 0x0000007C
+#define PLLC_FDBACK_DIV_S 2
+#define PLLC_ADD_FDBACK_DIV_M 0x00000080
+#define PLLC_ADD_FDBACK_DIV_S 7
+#define PLLC_CLKC_DIV_M 0x0001c000
+#define PLLC_CLKC_DIV_S 14
+#define PLLC_CLKM_DIV_M 0x00700000
+#define PLLC_CLKM_DIV_S 20
+
+/* CPU CLK Control fields */
+#define CPUCLK_CLK_SEL_M 0x00000003
+#define CPUCLK_CLK_SEL_S 0
+#define CPUCLK_CLK_DIV_M 0x0000000c
+#define CPUCLK_CLK_DIV_S 2
+
+/* AMBA CLK Control fields */
+#define AMBACLK_CLK_SEL_M 0x00000003
+#define AMBACLK_CLK_SEL_S 0
+#define AMBACLK_CLK_DIV_M 0x0000000c
+#define AMBACLK_CLK_DIV_S 2
+
+/*
+ * GPIO
+ */
+#define AR2315_GPIO_DI (AR2315_DSLBASE + 0x0088)
+#define AR2315_GPIO_DO (AR2315_DSLBASE + 0x0090)
+#define AR2315_GPIO_CR (AR2315_DSLBASE + 0x0098)
+#define AR2315_GPIO_INT (AR2315_DSLBASE + 0x00a0)
+
+#define AR2315_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
+#define AR2315_GPIO_CR_O(x) (1 << (x)) /* output */
+#define AR2315_GPIO_CR_I(x) (0) /* input */
+
+#define AR2315_GPIO_INT_S(x) (x) /* interrupt enable */
+#define AR2315_GPIO_INT_M (0x3F) /* mask for int */
+#define AR2315_GPIO_INT_LVL(x) ((x) << 6) /* interrupt level */
+#define AR2315_GPIO_INT_LVL_M ((0x3) << 6) /* mask for int level */
+
+#define AR2315_GPIO_INT_MAX_Y 1 /* Maximum value of Y for AR5313_GPIO_INT_* macros */
+#define AR2315_GPIO_INT_LVL_OFF 0 /* Triggerring off */
+#define AR2315_GPIO_INT_LVL_LOW 1 /* Low Level Triggered */
+#define AR2315_GPIO_INT_LVL_HIGH 2 /* High Level Triggered */
+#define AR2315_GPIO_INT_LVL_EDGE 3 /* Edge Triggered */
+
+#define AR2315_RESET_GPIO 5
+#define AR2315_NUM_GPIO 22
+
+/*
+ * PCI Clock Control
+ */
+#define AR2315_PCICLK (AR2315_DSLBASE + 0x00a4)
+
+#define AR2315_PCICLK_INPUT_M 0x3
+#define AR2315_PCICLK_INPUT_S 0
+
+#define AR2315_PCICLK_PLLC_CLKM 0
+#define AR2315_PCICLK_PLLC_CLKM1 1
+#define AR2315_PCICLK_PLLC_CLKC 2
+#define AR2315_PCICLK_REF_CLK 3
+
+#define AR2315_PCICLK_DIV_M 0xc
+#define AR2315_PCICLK_DIV_S 2
+
+#define AR2315_PCICLK_IN_FREQ 0
+#define AR2315_PCICLK_IN_FREQ_DIV_6 1
+#define AR2315_PCICLK_IN_FREQ_DIV_8 2
+#define AR2315_PCICLK_IN_FREQ_DIV_10 3
+
+/*
+ * Observation Control Register
+ */
+#define AR2315_OCR (AR2315_DSLBASE + 0x00b0)
+#define OCR_GPIO0_IRIN 0x0040
+#define OCR_GPIO1_IROUT 0x0080
+#define OCR_GPIO3_RXCLR 0x0200
+
+/*
+ * General Clock Control
+ */
+
+#define AR2315_MISCCLK (AR2315_DSLBASE + 0x00b4)
+#define MISCCLK_PLLBYPASS_EN 0x00000001
+#define MISCCLK_PROCREFCLK 0x00000002
+
+/*
+ * SDRAM Controller
+ * - No read or write buffers are included.
+ */
+#define AR2315_MEM_CFG (AR2315_SDRAMCTL + 0x00)
+#define AR2315_MEM_CTRL (AR2315_SDRAMCTL + 0x0c)
+#define AR2315_MEM_REF (AR2315_SDRAMCTL + 0x10)
+
+#define SDRAM_DATA_WIDTH_M 0x00006000
+#define SDRAM_DATA_WIDTH_S 13
+
+#define SDRAM_COL_WIDTH_M 0x00001E00
+#define SDRAM_COL_WIDTH_S 9
+
+#define SDRAM_ROW_WIDTH_M 0x000001E0
+#define SDRAM_ROW_WIDTH_S 5
+
+#define SDRAM_BANKADDR_BITS_M 0x00000018
+#define SDRAM_BANKADDR_BITS_S 3
+
+/*
+ * SPI Flash Interface Registers
+ */
+
+#define AR2315_SPI_CTL (AR2315_SPI + 0x00)
+#define AR2315_SPI_OPCODE (AR2315_SPI + 0x04)
+#define AR2315_SPI_DATA (AR2315_SPI + 0x08)
+
+#define SPI_CTL_START 0x00000100
+#define SPI_CTL_BUSY 0x00010000
+#define SPI_CTL_TXCNT_MASK 0x0000000f
+#define SPI_CTL_RXCNT_MASK 0x000000f0
+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
+#define SPI_CTL_SIZE_MASK 0x00060000
+
+#define SPI_CTL_CLK_SEL_MASK 0x03000000
+#define SPI_OPCODE_MASK 0x000000ff
+
+/*
+ * PCI Bus Interface Registers
+ */
+#define AR2315_PCI_1MS_REG (AR2315_PCI + 0x0008)
+#define AR2315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
+
+#define AR2315_PCI_MISC_CONFIG (AR2315_PCI + 0x000c)
+#define AR2315_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */
+#define AR2315_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */
+#define AR2315_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */
+#define AR2315_PCIMISC_RST_MODE 0x00000030
+#define AR2315_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */
+#define AR2315_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */
+#define AR2315_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */
+#define AR2315_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */
+#define AR2315_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */
+#define AR2315_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */
+#define AR2315_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */
+#define AR2315_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */
+
+#define AR2315_PCI_OUT_TSTAMP (AR2315_PCI + 0x0010)
+
+#define AR2315_PCI_UNCACHE_CFG (AR2315_PCI + 0x0014)
+
+#define AR2315_PCI_IN_EN (AR2315_PCI + 0x0100)
+#define AR2315_PCI_IN_EN0 0x01 /* Enable chain 0 */
+#define AR2315_PCI_IN_EN1 0x02 /* Enable chain 1 */
+#define AR2315_PCI_IN_EN2 0x04 /* Enable chain 2 */
+#define AR2315_PCI_IN_EN3 0x08 /* Enable chain 3 */
+
+#define AR2315_PCI_IN_DIS (AR2315_PCI + 0x0104)
+#define AR2315_PCI_IN_DIS0 0x01 /* Disable chain 0 */
+#define AR2315_PCI_IN_DIS1 0x02 /* Disable chain 1 */
+#define AR2315_PCI_IN_DIS2 0x04 /* Disable chain 2 */
+#define AR2315_PCI_IN_DIS3 0x08 /* Disable chain 3 */
+
+#define AR2315_PCI_IN_PTR (AR2315_PCI + 0x0200)
+
+#define AR2315_PCI_OUT_EN (AR2315_PCI + 0x0400)
+#define AR2315_PCI_OUT_EN0 0x01 /* Enable chain 0 */
+
+#define AR2315_PCI_OUT_DIS (AR2315_PCI + 0x0404)
+#define AR2315_PCI_OUT_DIS0 0x01 /* Disable chain 0 */
+
+#define AR2315_PCI_OUT_PTR (AR2315_PCI + 0x0408)
+
+#define AR2315_PCI_INT_STATUS (AR2315_PCI + 0x0500) /* write one to clr */
+#define AR2315_PCI_TXINT 0x00000001 /* Desc In Completed */
+#define AR2315_PCI_TXOK 0x00000002 /* Desc In OK */
+#define AR2315_PCI_TXERR 0x00000004 /* Desc In ERR */
+#define AR2315_PCI_TXEOL 0x00000008 /* Desc In End-of-List */
+#define AR2315_PCI_RXINT 0x00000010 /* Desc Out Completed */
+#define AR2315_PCI_RXOK 0x00000020 /* Desc Out OK */
+#define AR2315_PCI_RXERR 0x00000040 /* Desc Out ERR */
+#define AR2315_PCI_RXEOL 0x00000080 /* Desc Out EOL */
+#define AR2315_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */
+#define AR2315_PCI_MASK 0x0000FFFF /* Desc Mask */
+#define AR2315_PCI_EXT_INT 0x02000000
+#define AR2315_PCI_ABORT_INT 0x04000000
+
+#define AR2315_PCI_INT_MASK (AR2315_PCI + 0x0504) /* same as INT_STATUS */
+
+#define AR2315_PCI_INTEN_REG (AR2315_PCI + 0x0508)
+#define AR2315_PCI_INT_DISABLE 0x00 /* disable pci interrupts */
+#define AR2315_PCI_INT_ENABLE 0x01 /* enable pci interrupts */
+
+#define AR2315_PCI_HOST_IN_EN (AR2315_PCI + 0x0800)
+#define AR2315_PCI_HOST_IN_DIS (AR2315_PCI + 0x0804)
+#define AR2315_PCI_HOST_IN_PTR (AR2315_PCI + 0x0810)
+#define AR2315_PCI_HOST_OUT_EN (AR2315_PCI + 0x0900)
+#define AR2315_PCI_HOST_OUT_DIS (AR2315_PCI + 0x0904)
+#define AR2315_PCI_HOST_OUT_PTR (AR2315_PCI + 0x0908)
+
+
+/*
+ * Local Bus Interface Registers
+ */
+#define AR2315_LB_CONFIG (AR2315_LOCAL + 0x0000)
+#define AR2315_LBCONF_OE 0x00000001 /* =1 OE is low-true */
+#define AR2315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */
+#define AR2315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */
+#define AR2315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */
+#define AR2315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */
+#define AR2315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */
+#define AR2315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */
+#define AR2315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */
+#define AR2315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */
+#define AR2315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */
+#define AR2315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */
+#define AR2315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */
+#define AR2315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */
+#define AR2315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */
+#define AR2315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */
+#define AR2315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */
+#define AR2315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */
+#define AR2315_LBCONF_INT 0x00020000 /* =1 Intr is low true */
+#define AR2315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */
+#define AR2315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */
+#define AR2315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */
+#define AR2315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */
+#define AR2315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */
+#define AR2315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */
+#define AR2315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */
+
+#define AR2315_LB_CLKSEL (AR2315_LOCAL + 0x0004)
+#define AR2315_LBCLK_EXT 0x0001 /* use external clk for lb */
+
+#define AR2315_LB_1MS (AR2315_LOCAL + 0x0008)
+#define AR2315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
+
+#define AR2315_LB_MISCCFG (AR2315_LOCAL + 0x000C)
+#define AR2315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */
+#define AR2315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */
+#define AR2315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */
+#define AR2315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */
+#define AR2315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */
+#define AR2315_LBM_TIMEOUT_MASK 0x00FFFF80
+#define AR2315_LBM_TIMEOUT_SHFT 7
+#define AR2315_LBM_PORTMUX 0x07000000
+
+
+#define AR2315_LB_RXTSOFF (AR2315_LOCAL + 0x0010)
+
+#define AR2315_LB_TX_CHAIN_EN (AR2315_LOCAL + 0x0100)
+#define AR2315_LB_TXEN_0 0x01
+#define AR2315_LB_TXEN_1 0x02
+#define AR2315_LB_TXEN_2 0x04
+#define AR2315_LB_TXEN_3 0x08
+
+#define AR2315_LB_TX_CHAIN_DIS (AR2315_LOCAL + 0x0104)
+#define AR2315_LB_TX_DESC_PTR (AR2315_LOCAL + 0x0200)
+
+#define AR2315_LB_RX_CHAIN_EN (AR2315_LOCAL + 0x0400)
+#define AR2315_LB_RXEN 0x01
+
+#define AR2315_LB_RX_CHAIN_DIS (AR2315_LOCAL + 0x0404)
+#define AR2315_LB_RX_DESC_PTR (AR2315_LOCAL + 0x0408)
+
+#define AR2315_LB_INT_STATUS (AR2315_LOCAL + 0x0500)
+#define AR2315_INT_TX_DESC 0x0001
+#define AR2315_INT_TX_OK 0x0002
+#define AR2315_INT_TX_ERR 0x0004
+#define AR2315_INT_TX_EOF 0x0008
+#define AR2315_INT_RX_DESC 0x0010
+#define AR2315_INT_RX_OK 0x0020
+#define AR2315_INT_RX_ERR 0x0040
+#define AR2315_INT_RX_EOF 0x0080
+#define AR2315_INT_TX_TRUNC 0x0100
+#define AR2315_INT_TX_STARVE 0x0200
+#define AR2315_INT_LB_TIMEOUT 0x0400
+#define AR2315_INT_LB_ERR 0x0800
+#define AR2315_INT_MBOX_WR 0x1000
+#define AR2315_INT_MBOX_RD 0x2000
+
+/* Bit definitions for INT MASK are the same as INT_STATUS */
+#define AR2315_LB_INT_MASK (AR2315_LOCAL + 0x0504)
+
+#define AR2315_LB_INT_EN (AR2315_LOCAL + 0x0508)
+#define AR2315_LB_MBOX (AR2315_LOCAL + 0x0600)
+
+/*
+ * IR Interface Registers
+ */
+#define AR2315_IR_PKTDATA (AR2315_IR + 0x0000)
+
+#define AR2315_IR_PKTLEN (AR2315_IR + 0x07fc) /* 0 - 63 */
+
+#define AR2315_IR_CONTROL (AR2315_IR + 0x0800)
+#define AR2315_IRCTL_TX 0x00000000 /* use as tranmitter */
+#define AR2315_IRCTL_RX 0x00000001 /* use as receiver */
+#define AR2315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */
+#define AR2315_IRCTL_SAMPLECLK_SHFT 1
+#define AR2315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */
+#define AR2315_IRCTL_OUTPUTCLK_SHFT 14
+
+#define AR2315_IR_STATUS (AR2315_IR + 0x0804)
+#define AR2315_IRSTS_RX 0x00000001 /* receive in progress */
+#define AR2315_IRSTS_TX 0x00000002 /* transmit in progress */
+
+#define AR2315_IR_CONFIG (AR2315_IR + 0x0808)
+#define AR2315_IRCFG_INVIN 0x00000001 /* invert input polarity */
+#define AR2315_IRCFG_INVOUT 0x00000002 /* invert output polarity */
+#define AR2315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */
+#define AR2315_IRCFG_SEQ_START_THRESH 0x000000f0 /* */
+#define AR2315_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */
+#define AR2315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */
+#define AR2315_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */
+#define AR2315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */
+#define AR2315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */
+
+#define HOST_PCI_DEV_ID 3
+#define HOST_PCI_MBAR0 0x10000000
+#define HOST_PCI_MBAR1 0x20000000
+#define HOST_PCI_MBAR2 0x30000000
+
+#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1
+#define PCI_DEVICE_MEM_SPACE 0x800000
+
+#endif /* __AR2315_REG_H */
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/ar5312_regs.h
@@ -0,0 +1,236 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+#ifndef AR5312_H
+#define AR5312_H
+
+#include <asm/addrspace.h>
+
+/*
+ * IRQs
+ */
+
+#define AR5312_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
+#define AR5312_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
+#define AR5312_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
+#define AR5312_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
+#define AR5312_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
+
+
+/* Address Map */
+#define AR531X_WLAN0 0x18000000
+#define AR531X_WLAN1 0x18500000
+#define AR531X_ENET0 0x18100000
+#define AR531X_ENET1 0x18200000
+#define AR531X_SDRAMCTL 0x18300000
+#define AR531X_FLASHCTL 0x18400000
+#define AR531X_APBBASE 0x1c000000
+#define AR531X_FLASH 0x1e000000
+#define AR531X_UART0 0xbc000003 /* UART MMR */
+
+/*
+ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
+ * should be considered available. The AR5312 supports 2 enet MACS,
+ * even though many reference boards only actually use 1 of them
+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
+ * The AR2312 supports 1 enet MAC.
+ */
+#define AR531X_NUM_ENET_MAC 2
+
+/*
+ * Need these defines to determine true number of ethernet MACs
+ */
+#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
+#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
+#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
+#define AR531X_RADIO_MASK_OFF 0xc8
+#define AR531X_RADIO0_MASK 0x0003
+#define AR531X_RADIO1_MASK 0x000c
+#define AR531X_RADIO1_S 2
+
+/*
+ * AR531X_NUM_WMAC defines the number of Wireless MACs that\
+ * should be considered available.
+ */
+#define AR531X_NUM_WMAC 2
+
+/* Reset/Timer Block Address Map */
+#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000)
+#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */
+#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
+#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */
+#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
+#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
+#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
+#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064)
+#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c)
+#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070)
+#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074)
+#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078)
+#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c)
+#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */
+#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */
+
+/* AR531X_WD_CTRL register bit field definitions */
+#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
+#define AR531X_WD_CTRL_NMI 0x0001
+#define AR531X_WD_CTRL_RESET 0x0002
+
+/* AR531X_ISR register bit field definitions */
+#define AR531X_ISR_NONE 0x0000
+#define AR531X_ISR_TIMER 0x0001
+#define AR531X_ISR_AHBPROC 0x0002
+#define AR531X_ISR_AHBDMA 0x0004
+#define AR531X_ISR_GPIO 0x0008
+#define AR531X_ISR_UART0 0x0010
+#define AR531X_ISR_UART0DMA 0x0020
+#define AR531X_ISR_WD 0x0040
+#define AR531X_ISR_LOCAL 0x0080
+
+/* AR531X_RESET register bit field definitions */
+#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */
+#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */
+#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
+#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
+#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
+#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
+#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
+#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
+#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
+#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */
+#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
+#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
+#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
+#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */
+#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
+#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
+#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
+#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */
+
+#define AR531X_RESET_WMAC0_BITS \
+ AR531X_RESET_WLAN0 |\
+ AR531X_RESET_WARM_WLAN0_MAC |\
+ AR531X_RESET_WARM_WLAN0_BB
+
+#define AR531X_RESERT_WMAC1_BITS \
+ AR531X_RESET_WLAN1 |\
+ AR531X_RESET_WARM_WLAN1_MAC |\
+ AR531X_RESET_WARM_WLAN1_BB
+
+/* AR5312_CLOCKCTL1 register bit field definitions */
+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
+
+/* Valid for AR5312 and AR2312 */
+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
+
+/* Valid for AR2313 */
+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
+#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
+
+
+/* AR531X_ENABLE register bit field definitions */
+#define AR531X_ENABLE_WLAN0 0x0001
+#define AR531X_ENABLE_ENET0 0x0002
+#define AR531X_ENABLE_ENET1 0x0004
+#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */
+#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
+#define AR531X_ENABLE_WLAN1 \
+ (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
+
+/* AR531X_REV register bit field definitions */
+#define AR531X_REV_WMAC_MAJ 0xf000
+#define AR531X_REV_WMAC_MAJ_S 12
+#define AR531X_REV_WMAC_MIN 0x0f00
+#define AR531X_REV_WMAC_MIN_S 8
+#define AR531X_REV_MAJ 0x00f0
+#define AR531X_REV_MAJ_S 4
+#define AR531X_REV_MIN 0x000f
+#define AR531X_REV_MIN_S 0
+#define AR531X_REV_CHIP (AR531X_REV_MAJ|AR531X_REV_MIN)
+
+/* Major revision numbers, bits 7..4 of Revision ID register */
+#define AR531X_REV_MAJ_AR5312 0x4
+#define AR531X_REV_MAJ_AR2313 0x5
+
+/* Minor revision numbers, bits 3..0 of Revision ID register */
+#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
+#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
+
+/* AR531X_FLASHCTL register bit field definitions */
+#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */
+#define FLASHCTL_IDCY_S 0
+#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
+#define FLASHCTL_WST1_S 5
+#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
+#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
+#define FLASHCTL_WST2_S 11
+#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */
+#define FLASHCTL_AC_S 16
+#define FLASHCTL_AC_128K 0x00000000
+#define FLASHCTL_AC_256K 0x00010000
+#define FLASHCTL_AC_512K 0x00020000
+#define FLASHCTL_AC_1M 0x00030000
+#define FLASHCTL_AC_2M 0x00040000
+#define FLASHCTL_AC_4M 0x00050000
+#define FLASHCTL_AC_8M 0x00060000
+#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
+#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
+#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */
+#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */
+#define FLASHCTL_WP 0x04000000 /* Write protect */
+#define FLASHCTL_BM 0x08000000 /* Burst mode */
+#define FLASHCTL_MW 0x30000000 /* Memory width */
+#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */
+#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */
+#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */
+#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */
+#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */
+#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */
+
+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */
+#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00)
+#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04)
+#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08)
+
+/* ARM SDRAM Controller -- just enough to determine memory size */
+#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
+#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */
+#define MEM_CFG1_AC0_S 8
+#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */
+#define MEM_CFG1_AC1_S 12
+
+/* GPIO Address Map */
+#define AR531X_GPIO (AR531X_APBBASE + 0x2000)
+#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */
+#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */
+#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */
+
+/* GPIO Control Register bit field definitions */
+#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
+#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */
+#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */
+#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
+#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
+#define AR531X_NUM_GPIO 8
+
+
+#endif
+
--- /dev/null
+++ b/arch/mips/ar231x/ar5312.c
@@ -0,0 +1,563 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Platform devices for Atheros SoCs
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/leds.h>
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <gpio.h>
+
+#include <ar231x_platform.h>
+#include <ar5312_regs.h>
+#include <ar231x.h>
+#include "devices.h"
+#include "ar5312.h"
+
+#define IS_5312() (current_cpu_data.cputype != CPU_4KEC)
+
+static void
+ar5312_misc_irq_dispatch(void)
+{
+ unsigned int ar231x_misc_intrs = ar231x_read_reg(AR531X_ISR) & ar231x_read_reg(AR531X_IMR);
+
+ if (ar231x_misc_intrs & AR531X_ISR_TIMER) {
+ do_IRQ(AR531X_MISC_IRQ_TIMER);
+ (void)ar231x_read_reg(AR531X_TIMER);
+ } else if (ar231x_misc_intrs & AR531X_ISR_AHBPROC)
+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
+ else if ((ar231x_misc_intrs & AR531X_ISR_UART0))
+ do_IRQ(AR531X_MISC_IRQ_UART0);
+ else if (ar231x_misc_intrs & AR531X_ISR_WD)
+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
+ else
+ do_IRQ(AR531X_MISC_IRQ_NONE);
+}
+
+void
+ar5312_irq_dispatch(void)
+{
+ int pending = read_c0_status() & read_c0_cause();
+
+ if (pending & CAUSEF_IP2)
+ do_IRQ(AR5312_IRQ_WLAN0_INTRS);
+ else if (pending & CAUSEF_IP3)
+ do_IRQ(AR5312_IRQ_ENET0_INTRS);
+ else if (pending & CAUSEF_IP4)
+ do_IRQ(AR5312_IRQ_ENET1_INTRS);
+ else if (pending & CAUSEF_IP5)
+ do_IRQ(AR5312_IRQ_WLAN1_INTRS);
+ else if (pending & CAUSEF_IP6)
+ ar5312_misc_irq_dispatch();
+ else if (pending & CAUSEF_IP7)
+ do_IRQ(AR531X_IRQ_CPU_CLOCK);
+}
+
+
+/* Enable the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5312_misc_intr_enable(unsigned int irq)
+{
+ unsigned int imr;
+
+ imr = ar231x_read_reg(AR531X_IMR);
+ imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1));
+ ar231x_write_reg(AR531X_IMR, imr);
+}
+
+/* Disable the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5312_misc_intr_disable(unsigned int irq)
+{
+ unsigned int imr;
+
+ imr = ar231x_read_reg(AR531X_IMR);
+ imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1));
+ ar231x_write_reg(AR531X_IMR, imr);
+ ar231x_read_reg(AR531X_IMR); /* flush write buffer */
+}
+
+static unsigned int
+ar5312_misc_intr_startup(unsigned int irq)
+{
+ ar5312_misc_intr_enable(irq);
+ return 0;
+}
+
+static void
+ar5312_misc_intr_end(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+ ar5312_misc_intr_enable(irq);
+}
+
+static struct irq_chip ar5312_misc_intr_controller = {
+ .name = "AR5312-MISC",
+ .startup = ar5312_misc_intr_startup,
+ .shutdown = ar5312_misc_intr_disable,
+ .enable = ar5312_misc_intr_enable,
+ .disable = ar5312_misc_intr_disable,
+ .ack = ar5312_misc_intr_disable,
+ .end = ar5312_misc_intr_end,
+};
+
+
+static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id)
+{
+ u32 proc1 = ar231x_read_reg(AR531X_PROC1);
+ u32 procAddr = ar231x_read_reg(AR531X_PROCADDR); /* clears error state */
+ u32 dma1 = ar231x_read_reg(AR531X_DMA1);
+ u32 dmaAddr = ar231x_read_reg(AR531X_DMAADDR); /* clears error state */
+
+ printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n",
+ procAddr, proc1, dmaAddr, dma1);
+
+ machine_restart("AHB error"); /* Catastrophic failure */
+ return IRQ_HANDLED;
+}
+
+
+static struct irqaction ar5312_ahb_proc_interrupt = {
+ .handler = ar5312_ahb_proc_handler,
+ .flags = IRQF_DISABLED,
+ .name = "ar5312_ahb_proc_interrupt",
+};
+
+
+static struct irqaction cascade = {
+ .handler = no_action,
+ .flags = IRQF_DISABLED,
+ .name = "cascade",
+};
+
+void __init ar5312_irq_init(void)
+{
+ int i;
+
+ if (!IS_5312())
+ return;
+
+ ar231x_irq_dispatch = ar5312_irq_dispatch;
+ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
+ int irq = AR531X_MISC_IRQ_BASE + i;
+ irq_desc[irq].status = IRQ_DISABLED;
+ irq_desc[irq].action = NULL;
+ irq_desc[irq].depth = 1;
+ irq_desc[irq].chip = &ar5312_misc_intr_controller;
+ }
+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt);
+ setup_irq(AR5312_IRQ_MISC_INTRS, &cascade);
+}
+
+const struct ar231x_gpiodev ar5312_gpiodev;
+
+static u32
+ar5312_gpio_get_output(void)
+{
+ u32 reg;
+ reg = ~(ar231x_read_reg(AR531X_GPIO_CR));
+ reg &= ar5312_gpiodev.valid_mask;
+ return reg;
+}
+
+static u32
+ar5312_gpio_set_output(u32 mask, u32 val)
+{
+ u32 reg;
+
+ reg = ar231x_read_reg(AR531X_GPIO_CR);
+ reg |= mask;
+ reg &= ~val;
+ ar231x_write_reg(AR531X_GPIO_CR, reg);
+ return reg;
+}
+
+static u32
+ar5312_gpio_get(void)
+{
+ u32 reg;
+ reg = ar231x_read_reg(AR531X_GPIO_DI);
+ reg &= ar5312_gpiodev.valid_mask;
+ return reg;
+}
+
+static u32
+ar5312_gpio_set(u32 mask, u32 value)
+{
+ u32 reg;
+ reg = ar231x_read_reg(AR531X_GPIO_DO);
+ reg &= ~mask;
+ reg |= value;
+ ar231x_write_reg(AR531X_GPIO_DO, reg);
+ return reg;
+}
+
+const struct ar231x_gpiodev ar5312_gpiodev = {
+ .valid_mask = (1 << 8) - 1,
+ .get_output = ar5312_gpio_get_output,
+ .set_output = ar5312_gpio_set_output,
+ .get = ar5312_gpio_get,
+ .set = ar5312_gpio_set,
+};
+
+static struct physmap_flash_data ar5312_flash_data = {
+ .width = 2,
+};
+
+static struct resource ar5312_flash_resource = {
+ .start = AR531X_FLASH,
+ .end = AR531X_FLASH + 0x800000 - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct ar231x_eth ar5312_eth0_data = {
+ .reset_base = AR531X_RESET,
+ .reset_mac = AR531X_RESET_ENET0,
+ .reset_phy = AR531X_RESET_EPHY0,
+ .phy_base = KSEG1ADDR(AR531X_ENET0),
+ .config = &ar231x_board,
+};
+
+static struct ar231x_eth ar5312_eth1_data = {
+ .reset_base = AR531X_RESET,
+ .reset_mac = AR531X_RESET_ENET1,
+ .reset_phy = AR531X_RESET_EPHY1,
+ .phy_base = KSEG1ADDR(AR531X_ENET1),
+ .config = &ar231x_board,
+};
+
+static struct platform_device ar5312_physmap_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev.platform_data = &ar5312_flash_data,
+ .resource = &ar5312_flash_resource,
+ .num_resources = 1,
+};
+
+#ifdef CONFIG_LEDS_GPIO
+static struct gpio_led ar5312_leds[] = {
+ { .name = "wlan", .gpio = 0, .active_low = 1, },
+};
+
+static const struct gpio_led_platform_data ar5312_led_data = {
+ .num_leds = ARRAY_SIZE(ar5312_leds),
+ .leds = (void *) ar5312_leds,
+};
+
+static struct platform_device ar5312_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = (void *) &ar5312_led_data,
+};
+#endif
+
+/*
+ * NB: This mapping size is larger than the actual flash size,
+ * but this shouldn't be a problem here, because the flash
+ * will simply be mapped multiple times.
+ */
+static char __init *ar5312_flash_limit(void)
+{
+ u32 ctl;
+ /*
+ * Configure flash bank 0.
+ * Assume 8M window size. Flash will be aliased if it's smaller
+ */
+ ctl = FLASHCTL_E |
+ FLASHCTL_AC_8M |
+ FLASHCTL_RBLE |
+ (0x01 << FLASHCTL_IDCY_S) |
+ (0x07 << FLASHCTL_WST1_S) |
+ (0x07 << FLASHCTL_WST2_S) |
+ (ar231x_read_reg(AR531X_FLASHCTL0) & FLASHCTL_MW);
+
+ ar231x_write_reg(AR531X_FLASHCTL0, ctl);
+
+ /* Disable other flash banks */
+ ar231x_write_reg(AR531X_FLASHCTL1,
+ ar231x_read_reg(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC));
+
+ ar231x_write_reg(AR531X_FLASHCTL2,
+ ar231x_read_reg(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC));
+
+ return (char *) KSEG1ADDR(AR531X_FLASH + 0x800000);
+}
+
+int __init ar5312_init_devices(void)
+{
+ struct ar231x_boarddata *config;
+ u32 fctl = 0;
+ const u8 *radio;
+ u8 *c;
+
+ if (!IS_5312())
+ return 0;
+
+ /* Locate board/radio config data */
+ ar231x_find_config(ar5312_flash_limit());
+ config = ar231x_board.config;
+
+
+ /*
+ * Chip IDs and hardware detection for some Atheros
+ * models are really broken!
+ *
+ * Atheros uses a disabled WMAC0 and Silicon ID of AR5312
+ * as indication for AR2312, which is otherwise
+ * indistinguishable from the real AR5312.
+ */
+ if (ar231x_board.radio) {
+ radio = ar231x_board.radio + AR531X_RADIO_MASK_OFF;
+ if ((*((const u32 *) radio) & AR531X_RADIO0_MASK) == 0)
+ config->flags |= BD_ISCASPER;
+ } else
+ radio = NULL;
+
+ /* AR2313 has CPU minor rev. 10 */
+ if ((current_cpu_data.processor_id & 0xff) == 0x0a)
+ ar231x_devtype = DEV_TYPE_AR2313;
+
+ /* AR2312 shares the same Silicon ID as AR5312 */
+ else if (config->flags & BD_ISCASPER)
+ ar231x_devtype = DEV_TYPE_AR2312;
+
+ /* Everything else is probably AR5312 or compatible */
+ else
+ ar231x_devtype = DEV_TYPE_AR5312;
+
+ /* fixup flash width */
+ fctl = ar231x_read_reg(AR531X_FLASHCTL) & FLASHCTL_MW;
+ switch (fctl) {
+ case FLASHCTL_MWx16:
+ ar5312_flash_data.width = 2;
+ break;
+ case FLASHCTL_MWx8:
+ default:
+ ar5312_flash_data.width = 1;
+ break;
+ }
+
+ platform_device_register(&ar5312_physmap_flash);
+
+#ifdef CONFIG_LEDS_GPIO
+ ar5312_leds[0].gpio = config->sysLedGpio;
+ platform_device_register(&ar5312_gpio_leds);
+#endif
+
+ /* Fix up MAC addresses if necessary */
+ if (!memcmp(config->enet0_mac, "\xff\xff\xff\xff\xff\xff", 6))
+ memcpy(config->enet0_mac, config->enet1_mac, 6);
+
+ /* If ENET0 and ENET1 have the same mac address,
+ * increment the one from ENET1 */
+ if (memcmp(config->enet0_mac, config->enet1_mac, 6) == 0) {
+ c = config->enet1_mac + 5;
+ while ((c >= config->enet1_mac) && !(++(*c)))
+ c--;
+ }
+
+ switch(ar231x_devtype) {
+ case DEV_TYPE_AR5312:
+ ar5312_eth0_data.macaddr = config->enet0_mac;
+ ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET0),
+ AR5312_IRQ_ENET0_INTRS, &ar5312_eth0_data);
+
+ ar5312_eth1_data.macaddr = config->enet1_mac;
+ ar231x_add_ethernet(1, KSEG1ADDR(AR531X_ENET1),
+ AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
+
+ if (!ar231x_board.radio)
+ return 0;
+
+ if (*((u32 *) radio) & AR531X_RADIO0_MASK)
+ ar231x_add_wmac(0, AR531X_WLAN0,
+ AR5312_IRQ_WLAN0_INTRS);
+
+ break;
+ /*
+ * AR2312/3 ethernet uses the PHY of ENET0, but the MAC
+ * of ENET1. Atheros calls it 'twisted' for a reason :)
+ */
+ case DEV_TYPE_AR2312:
+ case DEV_TYPE_AR2313:
+ ar5312_eth1_data.phy_base = ar5312_eth0_data.phy_base;
+ ar5312_eth1_data.reset_phy = ar5312_eth0_data.reset_phy;
+ ar5312_eth1_data.macaddr = config->enet0_mac;
+ ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET1),
+ AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
+
+ if (!ar231x_board.radio)
+ return 0;
+ break;
+ default:
+ break;
+ }
+
+ if (*((u32 *) radio) & AR531X_RADIO1_MASK)
+ ar231x_add_wmac(1, AR531X_WLAN1,
+ AR5312_IRQ_WLAN1_INTRS);
+
+ return 0;
+}
+
+
+static void ar5312_restart(char *command)
+{
+ /* reset the system */
+ local_irq_disable();
+ while(1) {
+ ar231x_write_reg(AR531X_RESET, AR531X_RESET_SYSTEM);
+ }
+}
+
+
+/*
+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
+ * to determine the predevisor value.
+ */
+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = {
+ 1,
+ 2,
+ 4,
+ 5
+};
+
+
+static int __init
+ar5312_cpu_frequency(void)
+{
+ unsigned int result;
+ unsigned int predivide_mask, predivide_shift;
+ unsigned int multiplier_mask, multiplier_shift;
+ unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier;
+ unsigned int doubler_mask;
+ u16 devid;
+
+ /* Trust the bootrom's idea of cpu frequency. */
+ if ((result = ar231x_read_reg(AR5312_SCRATCH)))
+ return result;
+
+ devid = ar231x_read_reg(AR531X_REV);
+ devid &= AR531X_REV_MAJ;
+ devid >>= AR531X_REV_MAJ_S;
+ if (devid == AR531X_REV_MAJ_AR2313) {
+ predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
+ predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
+ multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
+ multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
+ doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
+ } else { /* AR5312 and AR2312 */
+ predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
+ predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
+ multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
+ multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
+ doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
+ }
+
+ /*
+ * Clocking is derived from a fixed 40MHz input clock.
+ *
+ * cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
+ * sysFreq = cpuFreq / 4 (used for APB clock, serial,
+ * flash, Timer, Watchdog Timer)
+ *
+ * cntFreq = cpuFreq / 2 (use for CPU count/compare)
+ *
+ * So, for example, with a PLL multiplier of 5, we have
+ *
+ * cpuFreq = 200MHz
+ * sysFreq = 50MHz
+ * cntFreq = 100MHz
+ *
+ * We compute the CPU frequency, based on PLL settings.
+ */
+
+ clockCtl1 = ar231x_read_reg(AR5312_CLOCKCTL1);
+ preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift;
+ preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect];
+ multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift;
+
+ if (clockCtl1 & doubler_mask) {
+ multiplier = multiplier << 1;
+ }
+ return (40000000 / preDivisor) * multiplier;
+}
+
+static inline int
+ar5312_sys_frequency(void)
+{
+ return ar5312_cpu_frequency() / 4;
+}
+
+void __init
+ar5312_time_init(void)
+{
+ if (!IS_5312())
+ return;
+
+ mips_hpt_frequency = ar5312_cpu_frequency() / 2;
+}
+
+
+void __init
+ar5312_prom_init(void)
+{
+ u32 memsize, memcfg, bank0AC, bank1AC;
+ u32 devid;
+
+ if (!IS_5312())
+ return;
+
+ /* Detect memory size */
+ memcfg = ar231x_read_reg(AR531X_MEM_CFG1);
+ bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S;
+ bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S;
+ memsize = (bank0AC ? (1 << (bank0AC+1)) : 0)
+ + (bank1AC ? (1 << (bank1AC+1)) : 0);
+ memsize <<= 20;
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
+
+ devid = ar231x_read_reg(AR531X_REV);
+ devid >>= AR531X_REV_WMAC_MIN_S;
+ devid &= AR531X_REV_CHIP;
+ ar231x_board.devid = (u16) devid;
+ ar231x_gpiodev = &ar5312_gpiodev;
+}
+
+void __init
+ar5312_plat_setup(void)
+{
+ if (!IS_5312())
+ return;
+
+ /* Clear any lingering AHB errors */
+ ar231x_read_reg(AR531X_PROCADDR);
+ ar231x_read_reg(AR531X_DMAADDR);
+ ar231x_write_reg(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
+
+ _machine_restart = ar5312_restart;
+ ar231x_serial_setup(KSEG1ADDR(AR531X_UART0), ar5312_sys_frequency());
+}
+
--- /dev/null
+++ b/arch/mips/ar231x/ar2315.c
@@ -0,0 +1,677 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Platform devices for Atheros SoCs
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+#include <ar231x_platform.h>
+#include <ar2315_regs.h>
+#include <ar231x.h>
+#include "devices.h"
+#include "ar2315.h"
+
+#define IS_2315() (current_cpu_data.cputype == CPU_4KEC)
+
+static u32 gpiointmask = 0, gpiointval = 0;
+
+static inline void ar2315_gpio_irq(void)
+{
+ u32 pend;
+ int bit = -1;
+
+ /* only do one gpio interrupt at a time */
+ pend = (ar231x_read_reg(AR2315_GPIO_DI) ^ gpiointval) & gpiointmask;
+
+ if (pend) {
+ bit = fls(pend) - 1;
+ pend &= ~(1 << bit);
+ gpiointval ^= (1 << bit);
+ }
+
+ if (!pend)
+ ar231x_write_reg(AR2315_ISR, AR2315_ISR_GPIO);
+
+ if (bit >= 0)
+ do_IRQ(AR531X_GPIO_IRQ_BASE + bit);
+}
+
+
+/*
+ * Called when an interrupt is received, this function
+ * determines exactly which interrupt it was, and it
+ * invokes the appropriate handler.
+ *
+ * Implicitly, we also define interrupt priority by
+ * choosing which to dispatch first.
+ */
+static void
+ar2315_irq_dispatch(void)
+{
+ int pending = read_c0_status() & read_c0_cause();
+
+ if (pending & CAUSEF_IP3)
+ do_IRQ(AR2315_IRQ_WLAN0_INTRS);
+ else if (pending & CAUSEF_IP4)
+ do_IRQ(AR2315_IRQ_ENET0_INTRS);
+ else if (pending & CAUSEF_IP2) {
+ unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & ar231x_read_reg(AR2315_IMR);
+
+ if (misc_intr & AR2315_ISR_SPI)
+ do_IRQ(AR531X_MISC_IRQ_SPI);
+ else if (misc_intr & AR2315_ISR_TIMER)
+ do_IRQ(AR531X_MISC_IRQ_TIMER);
+ else if (misc_intr & AR2315_ISR_AHB)
+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
+ else if (misc_intr & AR2315_ISR_GPIO)
+ ar2315_gpio_irq();
+ else if (misc_intr & AR2315_ISR_UART0)
+ do_IRQ(AR531X_MISC_IRQ_UART0);
+ else if (misc_intr & AR2315_ISR_WD)
+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
+ else
+ do_IRQ(AR531X_MISC_IRQ_NONE);
+ } else if (pending & CAUSEF_IP7)
+ do_IRQ(AR531X_IRQ_CPU_CLOCK);
+}
+
+static void ar2315_set_gpiointmask(int gpio, int level)
+{
+ u32 reg;
+
+ reg = ar231x_read_reg(AR2315_GPIO_INT);
+ reg &= ~(AR2315_GPIO_INT_M | AR2315_GPIO_INT_LVL_M);
+ reg |= gpio | AR2315_GPIO_INT_LVL(level);
+ ar231x_write_reg(AR2315_GPIO_INT, reg);
+}
+
+static void ar2315_gpio_intr_enable(unsigned int irq)
+{
+ unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
+
+ /* reconfigure GPIO line as input */
+ ar231x_mask_reg(AR2315_GPIO_CR, AR2315_GPIO_CR_M(gpio), AR2315_GPIO_CR_I(gpio));
+
+ /* Enable interrupt with edge detection */
+ gpiointmask |= (1 << gpio);
+ ar2315_set_gpiointmask(gpio, 3);
+}
+
+static void ar2315_gpio_intr_disable(unsigned int irq)
+{
+ unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
+
+ /* Disable interrupt */
+ gpiointmask &= ~(1 << gpio);
+ ar2315_set_gpiointmask(gpio, 0);
+}
+
+static unsigned int
+ar2315_gpio_intr_startup(unsigned int irq)
+{
+ ar2315_gpio_intr_enable(irq);
+ return 0;
+}
+
+static void
+ar2315_gpio_intr_end(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+ ar2315_gpio_intr_enable(irq);
+}
+
+static struct irq_chip ar2315_gpio_intr_controller = {
+ .typename = "AR2315-GPIO",
+ .startup = ar2315_gpio_intr_startup,
+ .shutdown = ar2315_gpio_intr_disable,
+ .enable = ar2315_gpio_intr_enable,
+ .disable = ar2315_gpio_intr_disable,
+ .ack = ar2315_gpio_intr_disable,
+ .end = ar2315_gpio_intr_end,
+};
+
+static void
+ar2315_misc_intr_enable(unsigned int irq)
+{
+ unsigned int imr;
+
+ imr = ar231x_read_reg(AR2315_IMR);
+ switch(irq) {
+ case AR531X_MISC_IRQ_SPI:
+ imr |= AR2315_ISR_SPI;
+ break;
+ case AR531X_MISC_IRQ_TIMER:
+ imr |= AR2315_ISR_TIMER;
+ break;
+ case AR531X_MISC_IRQ_AHB_PROC:
+ imr |= AR2315_ISR_AHB;
+ break;
+ case AR531X_MISC_IRQ_GPIO:
+ imr |= AR2315_ISR_GPIO;
+ break;
+ case AR531X_MISC_IRQ_UART0:
+ imr |= AR2315_ISR_UART0;
+ break;
+ case AR531X_MISC_IRQ_WATCHDOG:
+ imr |= AR2315_ISR_WD;
+ break;
+ default:
+ break;
+ }
+ ar231x_write_reg(AR2315_IMR, imr);
+}
+
+static void
+ar2315_misc_intr_disable(unsigned int irq)
+{
+ unsigned int imr;
+
+ imr = ar231x_read_reg(AR2315_IMR);
+ switch(irq) {
+ case AR531X_MISC_IRQ_SPI:
+ imr &= ~AR2315_ISR_SPI;
+ break;
+ case AR531X_MISC_IRQ_TIMER:
+ imr &= ~AR2315_ISR_TIMER;
+ break;
+ case AR531X_MISC_IRQ_AHB_PROC:
+ imr &= ~AR2315_ISR_AHB;
+ break;
+ case AR531X_MISC_IRQ_GPIO:
+ imr &= ~AR2315_ISR_GPIO;
+ break;
+ case AR531X_MISC_IRQ_UART0:
+ imr &= ~AR2315_ISR_UART0;
+ break;
+ case AR531X_MISC_IRQ_WATCHDOG:
+ imr &= ~AR2315_ISR_WD;
+ break;
+ default:
+ break;
+ }
+ ar231x_write_reg(AR2315_IMR, imr);
+}
+
+static unsigned int
+ar2315_misc_intr_startup(unsigned int irq)
+{
+ ar2315_misc_intr_enable(irq);
+ return 0;
+}
+
+static void
+ar2315_misc_intr_end(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+ ar2315_misc_intr_enable(irq);
+}
+
+
+static struct irq_chip ar2315_misc_intr_controller = {
+ .typename = "AR2315-MISC",
+ .startup = ar2315_misc_intr_startup,
+ .shutdown = ar2315_misc_intr_disable,
+ .enable = ar2315_misc_intr_enable,
+ .disable = ar2315_misc_intr_disable,
+ .ack = ar2315_misc_intr_disable,
+ .end = ar2315_misc_intr_end,
+};
+
+static irqreturn_t ar2315_ahb_proc_handler(int cpl, void *dev_id)
+{
+ ar231x_write_reg(AR2315_AHB_ERR0, AHB_ERROR_DET);
+ ar231x_read_reg(AR2315_AHB_ERR1);
+
+ printk(KERN_ERR "AHB fatal error\n");
+ machine_restart("AHB error"); /* Catastrophic failure */
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction ar2315_ahb_proc_interrupt = {
+ .handler = ar2315_ahb_proc_handler,
+ .flags = IRQF_DISABLED,
+ .name = "ar2315_ahb_proc_interrupt",
+};
+
+static struct irqaction cascade = {
+ .handler = no_action,
+ .flags = IRQF_DISABLED,
+ .name = "cascade",
+};
+
+void
+ar2315_irq_init(void)
+{
+ int i;
+
+ if (!IS_2315())
+ return;
+
+ ar231x_irq_dispatch = ar2315_irq_dispatch;
+ gpiointval = ar231x_read_reg(AR2315_GPIO_DI);
+ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
+ int irq = AR531X_MISC_IRQ_BASE + i;
+ irq_desc[irq].status = IRQ_DISABLED;
+ irq_desc[irq].action = NULL;
+ irq_desc[irq].depth = 1;
+ irq_desc[irq].chip = &ar2315_misc_intr_controller;
+ }
+ for (i = 0; i < AR531X_GPIO_IRQ_COUNT; i++) {
+ int irq = AR531X_GPIO_IRQ_BASE + i;
+ irq_desc[irq].status = IRQ_DISABLED;
+ irq_desc[irq].action = NULL;
+ irq_desc[irq].depth = 1;
+ irq_desc[irq].chip = &ar2315_gpio_intr_controller;
+ }
+ setup_irq(AR531X_MISC_IRQ_GPIO, &cascade);
+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar2315_ahb_proc_interrupt);
+ setup_irq(AR2315_IRQ_MISC_INTRS, &cascade);
+}
+
+const struct ar231x_gpiodev ar2315_gpiodev;
+
+static u32
+ar2315_gpio_get_output(void)
+{
+ u32 reg;
+ reg = ar231x_read_reg(AR2315_GPIO_CR);
+ reg &= ar2315_gpiodev.valid_mask;
+ return reg;
+}
+
+static u32
+ar2315_gpio_set_output(u32 mask, u32 val)
+{
+ u32 reg;
+
+ reg = ar231x_read_reg(AR2315_GPIO_CR);
+ reg &= ~mask;
+ reg |= val;
+ ar231x_write_reg(AR2315_GPIO_CR, reg);
+ return reg;
+}
+
+static u32
+ar2315_gpio_get(void)
+{
+ u32 reg;
+ reg = ar231x_read_reg(AR2315_GPIO_DI);
+ reg &= ar2315_gpiodev.valid_mask;
+ return reg;
+}
+
+static u32
+ar2315_gpio_set(u32 mask, u32 value)
+{
+ u32 reg;
+ reg = ar231x_read_reg(AR2315_GPIO_DO);
+ reg &= ~mask;
+ reg |= value;
+ ar231x_write_reg(AR2315_GPIO_DO, reg);
+ return reg;
+}
+
+const struct ar231x_gpiodev ar2315_gpiodev = {
+ .valid_mask = (1 << 22) - 1,
+ .get_output = ar2315_gpio_get_output,
+ .set_output = ar2315_gpio_set_output,
+ .get = ar2315_gpio_get,
+ .set = ar2315_gpio_set,
+};
+
+static struct ar231x_eth ar2315_eth_data = {
+ .reset_base = AR2315_RESET,
+ .reset_mac = AR2315_RESET_ENET0,
+ .reset_phy = AR2315_RESET_EPHY0,
+ .phy_base = AR2315_ENET0,
+ .config = &ar231x_board,
+};
+
+static struct resource ar2315_spiflash_res[] = {
+ {
+ .name = "flash_base",
+ .flags = IORESOURCE_MEM,
+ .start = KSEG1ADDR(AR2315_SPI_READ),
+ .end = KSEG1ADDR(AR2315_SPI_READ) + 0x1000000 - 1,
+ },
+ {
+ .name = "flash_regs",
+ .flags = IORESOURCE_MEM,
+ .start = 0x11300000,
+ .end = 0x11300012,
+ },
+};
+
+static struct platform_device ar2315_spiflash = {
+ .id = 0,
+ .name = "spiflash",
+ .resource = ar2315_spiflash_res,
+ .num_resources = ARRAY_SIZE(ar2315_spiflash_res)
+};
+
+static struct platform_device ar2315_wdt = {
+ .id = 0,
+ .name = "ar2315_wdt",
+};
+
+#define SPI_FLASH_CTL 0x00
+#define SPI_FLASH_OPCODE 0x04
+#define SPI_FLASH_DATA 0x08
+
+static inline u32
+spiflash_read_reg(int reg)
+{
+ return ar231x_read_reg(KSEG1ADDR(AR2315_SPI) + reg);
+}
+
+static inline void
+spiflash_write_reg(int reg, u32 data)
+{
+ ar231x_write_reg(KSEG1ADDR(AR2315_SPI) + reg, data);
+}
+
+static u32
+spiflash_wait_status(void)
+{
+ u32 reg;
+
+ do {
+ reg = spiflash_read_reg(SPI_FLASH_CTL);
+ } while (reg & SPI_CTL_BUSY);
+
+ return reg;
+}
+
+static u8
+spiflash_probe(void)
+{
+ u32 reg;
+
+ reg = spiflash_wait_status();
+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
+ reg |= (1 << 4) | 4 | SPI_CTL_START;
+
+ spiflash_write_reg(SPI_FLASH_OPCODE, 0xab);
+ spiflash_write_reg(SPI_FLASH_CTL, reg);
+
+ reg = spiflash_wait_status();
+ reg = spiflash_read_reg(SPI_FLASH_DATA);
+ reg &= 0xff;
+
+ return (u8) reg;
+}
+
+
+#define STM_8MBIT_SIGNATURE 0x13
+#define STM_16MBIT_SIGNATURE 0x14
+#define STM_32MBIT_SIGNATURE 0x15
+#define STM_64MBIT_SIGNATURE 0x16
+#define STM_128MBIT_SIGNATURE 0x17
+
+static u8 __init *
+ar2315_flash_limit(void)
+{
+ u32 flash_size = 0;
+
+ /* probe the flash chip size */
+ switch(spiflash_probe()) {
+ case STM_8MBIT_SIGNATURE:
+ flash_size = 0x00100000;
+ break;
+ case STM_16MBIT_SIGNATURE:
+ flash_size = 0x00200000;
+ break;
+ case STM_32MBIT_SIGNATURE:
+ flash_size = 0x00400000;
+ break;
+ case STM_64MBIT_SIGNATURE:
+ flash_size = 0x00800000;
+ break;
+ case STM_128MBIT_SIGNATURE:
+ flash_size = 0x01000000;
+ break;
+ }
+
+ ar2315_spiflash_res[0].end = ar2315_spiflash_res[0].start +
+ flash_size - 1;
+ return (u8 *) ar2315_spiflash_res[0].end + 1;
+}
+
+#ifdef CONFIG_LEDS_GPIO
+static struct gpio_led ar2315_leds[6];
+static struct gpio_led_platform_data ar2315_led_data = {
+ .leds = (void *) ar2315_leds,
+};
+
+static struct platform_device ar2315_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = (void *) &ar2315_led_data,
+ }
+};
+
+static void __init
+ar2315_init_gpio(void)
+{
+ static char led_names[6][6];
+ int i, led = 0;
+
+ ar2315_led_data.num_leds = 0;
+ for(i = 1; i < 8; i++)
+ {
+ if((i == AR2315_RESET_GPIO) ||
+ (i == ar231x_board.config->resetConfigGpio))
+ continue;
+
+ if(i == ar231x_board.config->sysLedGpio)
+ strcpy(led_names[led], "wlan");
+ else
+ sprintf(led_names[led], "gpio%d", i);
+
+ ar2315_leds[led].name = led_names[led];
+ ar2315_leds[led].gpio = i;
+ ar2315_leds[led].active_low = 0;
+ led++;
+ }
+ ar2315_led_data.num_leds = led;
+ platform_device_register(&ar2315_gpio_leds);
+}
+#else
+static inline void ar2315_init_gpio(void)
+{
+}
+#endif
+
+int __init
+ar2315_init_devices(void)
+{
+ if (!IS_2315())
+ return 0;
+
+ /* Find board configuration */
+ ar231x_find_config(ar2315_flash_limit());
+ ar2315_eth_data.macaddr = ar231x_board.config->enet0_mac;
+
+ ar2315_init_gpio();
+ platform_device_register(&ar2315_wdt);
+ platform_device_register(&ar2315_spiflash);
+ ar231x_add_ethernet(0, AR2315_ENET0, AR2315_IRQ_ENET0_INTRS,
+ &ar2315_eth_data);
+ ar231x_add_wmac(0, AR2315_WLAN0, AR2315_IRQ_WLAN0_INTRS);
+
+ return 0;
+}
+
+static void
+ar2315_restart(char *command)
+{
+ void (*mips_reset_vec)(void) = (void *) 0xbfc00000;
+
+ local_irq_disable();
+
+ /* try reset the system via reset control */
+ ar231x_write_reg(AR2315_COLD_RESET,AR2317_RESET_SYSTEM);
+
+ /* Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround.
+ * give it some time to attempt a gpio based hardware reset
+ * (atheros reference design workaround) */
+ gpio_direction_output(AR2315_RESET_GPIO, 0);
+ mdelay(100);
+
+ /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
+ * workaround. Attempt to jump to the mips reset location -
+ * the boot loader itself might be able to recover the system */
+ mips_reset_vec();
+}
+
+
+/*
+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
+ * to determine the predevisor value.
+ */
+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = {
+ 1,
+ 2,
+ 4,
+ 5
+};
+
+static int __initdata PLLC_DIVIDE_TABLE[5] = {
+ 2,
+ 3,
+ 4,
+ 6,
+ 3
+};
+
+static unsigned int __init
+ar2315_sys_clk(unsigned int clockCtl)
+{
+ unsigned int pllcCtrl,cpuDiv;
+ unsigned int pllcOut,refdiv,fdiv,divby2;
+ unsigned int clkDiv;
+
+ pllcCtrl = ar231x_read_reg(AR2315_PLLC_CTL);
+ refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S;
+ refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv];
+ fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S;
+ divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S;
+ divby2 += 1;
+ pllcOut = (40000000/refdiv)*(2*divby2)*fdiv;
+
+
+ /* clkm input selected */
+ switch(clockCtl & CPUCLK_CLK_SEL_M) {
+ case 0:
+ case 1:
+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S];
+ break;
+ case 2:
+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S];
+ break;
+ default:
+ pllcOut = 40000000;
+ clkDiv = 1;
+ break;
+ }
+ cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;
+ cpuDiv = cpuDiv * 2 ?: 1;
+ return (pllcOut/(clkDiv * cpuDiv));
+}
+
+static inline unsigned int
+ar2315_cpu_frequency(void)
+{
+ return ar2315_sys_clk(ar231x_read_reg(AR2315_CPUCLK));
+}
+
+static inline unsigned int
+ar2315_apb_frequency(void)
+{
+ return ar2315_sys_clk(ar231x_read_reg(AR2315_AMBACLK));
+}
+
+void __init
+ar2315_time_init(void)
+{
+ if (!IS_2315())
+ return;
+
+ mips_hpt_frequency = ar2315_cpu_frequency() / 2;
+}
+
+void __init
+ar2315_prom_init(void)
+{
+ u32 memsize, memcfg, devid;
+
+ if (!IS_2315())
+ return;
+
+ memcfg = ar231x_read_reg(AR2315_MEM_CFG);
+ memsize = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S);
+ memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S);
+ memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S);
+ memsize <<= 3;
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
+
+ /* Detect the hardware based on the device ID */
+ devid = ar231x_read_reg(AR2315_SREV) & AR2315_REV_CHIP;
+ switch(devid) {
+ case 0x90:
+ case 0x91:
+ ar231x_devtype = DEV_TYPE_AR2317;
+ break;
+ default:
+ ar231x_devtype = DEV_TYPE_AR2315;
+ break;
+ }
+ ar231x_gpiodev = &ar2315_gpiodev;
+ ar231x_board.devid = devid;
+}
+
+void __init
+ar2315_plat_setup(void)
+{
+ u32 config;
+
+ if (!IS_2315())
+ return;
+
+ /* Clear any lingering AHB errors */
+ config = read_c0_config();
+ write_c0_config(config & ~0x3);
+ ar231x_write_reg(AR2315_AHB_ERR0,AHB_ERROR_DET);
+ ar231x_read_reg(AR2315_AHB_ERR1);
+ ar231x_write_reg(AR2315_WDC, AR2315_WDC_IGNORE_EXPIRATION);
+
+ _machine_restart = ar2315_restart;
+ ar231x_serial_setup(KSEG1ADDR(AR2315_UART0), ar2315_apb_frequency());
+}
--- /dev/null
+++ b/arch/mips/ar231x/ar2315.h
@@ -0,0 +1,37 @@
+#ifndef __AR2315_H
+#define __AR2315_H
+
+#ifdef CONFIG_ATHEROS_AR2315
+
+extern void ar2315_irq_init(void);
+extern int ar2315_init_devices(void);
+extern void ar2315_prom_init(void);
+extern void ar2315_plat_setup(void);
+extern void ar2315_time_init(void);
+
+#else
+
+static inline void ar2315_irq_init(void)
+{
+}
+
+static inline int ar2315_init_devices(void)
+{
+ return 0;
+}
+
+static inline void ar2315_prom_init(void)
+{
+}
+
+static inline void ar2315_plat_setup(void)
+{
+}
+
+static inline void ar2315_time_init(void)
+{
+}
+
+#endif
+
+#endif
--- /dev/null
+++ b/arch/mips/ar231x/ar5312.h
@@ -0,0 +1,38 @@
+#ifndef __AR5312_H
+#define __AR5312_H
+
+#ifdef CONFIG_ATHEROS_AR5312
+
+extern void ar5312_irq_init(void);
+extern int ar5312_init_devices(void);
+extern void ar5312_prom_init(void);
+extern void ar5312_plat_setup(void);
+extern void ar5312_time_init(void);
+extern void ar5312_time_init(void);
+
+#else
+
+static inline void ar5312_irq_init(void)
+{
+}
+
+static inline int ar5312_init_devices(void)
+{
+ return 0;
+}
+
+static inline void ar5312_prom_init(void)
+{
+}
+
+static inline void ar5312_plat_setup(void)
+{
+}
+
+static inline void ar5312_time_init(void)
+{
+}
+
+#endif
+
+#endif
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar231x/ar231x.h
@@ -0,0 +1,54 @@
+#ifndef __AR531X_H
+#define __AR531X_H
+
+#define AR531X_MISC_IRQ_BASE 0x20
+#define AR531X_GPIO_IRQ_BASE 0x30
+
+/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
+#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0
+#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
+
+/* Miscellaneous interrupts, which share IP6 */
+#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0
+#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1
+#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2
+#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3
+#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4
+#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5
+#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6
+#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7
+#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8
+#define AR531X_MISC_IRQ_SPI AR531X_MISC_IRQ_BASE+9
+#define AR531X_MISC_IRQ_COUNT 10
+
+/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
+#define AR531X_GPIO_IRQ_NONE AR531X_GPIO_IRQ_BASE+0
+#define AR531X_GPIO_IRQ(n) AR531X_GPIO_IRQ_BASE+n
+#define AR531X_GPIO_IRQ_COUNT 22
+
+static inline u32
+ar231x_read_reg(u32 reg)
+{
+ return __raw_readl((u32 *) KSEG1ADDR(reg));
+}
+
+static inline void
+ar231x_write_reg(u32 reg, u32 val)
+{
+ __raw_writel(val, (u32 *) KSEG1ADDR(reg));
+}
+
+static inline u32
+ar231x_mask_reg(u32 reg, u32 mask, u32 val)
+{
+ u32 ret;
+
+ ret = ar231x_read_reg(reg);
+ ret &= ~mask;
+ ret |= val;
+ ar231x_write_reg(reg, ret);
+
+ return ret;
+}
+
+#endif
--- /dev/null
+++ b/arch/mips/ar231x/devices.h
@@ -0,0 +1,27 @@
+#ifndef __AR231X_DEVICES_H
+#define __AR231X_DEVICES_H
+
+enum {
+ /* handled by ar5312.c */
+ DEV_TYPE_AR2312,
+ DEV_TYPE_AR2313,
+ DEV_TYPE_AR5312,
+
+ /* handled by ar2315.c */
+ DEV_TYPE_AR2315,
+ DEV_TYPE_AR2316,
+ DEV_TYPE_AR2317,
+
+ DEV_TYPE_UNKNOWN
+};
+
+extern int ar231x_devtype;
+extern struct ar231x_board_config ar231x_board;
+extern void (*ar231x_irq_dispatch)(void);
+
+extern int ar231x_find_config(u8 *flash_limit);
+extern void ar231x_serial_setup(u32 mapbase, unsigned int uartclk);
+extern int ar231x_add_wmac(int nr, u32 base, int irq);
+extern int ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata);
+
+#endif
--- /dev/null
+++ b/arch/mips/ar231x/devices.c
@@ -0,0 +1,175 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <ar231x_platform.h>
+#include <ar231x.h>
+#include "devices.h"
+#include "ar5312.h"
+#include "ar2315.h"
+
+struct ar231x_board_config ar231x_board;
+int ar231x_devtype = DEV_TYPE_UNKNOWN;
+const struct ar231x_gpiodev *ar231x_gpiodev;
+EXPORT_SYMBOL(ar231x_gpiodev);
+
+static struct resource ar231x_eth0_res[] = {
+ {
+ .name = "eth0_membase",
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "eth0_irq",
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource ar231x_eth1_res[] = {
+ {
+ .name = "eth1_membase",
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "eth1_irq",
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device ar231x_eth[] = {
+ {
+ .id = 0,
+ .name = "ar231x-eth",
+ .resource = ar231x_eth0_res,
+ .num_resources = ARRAY_SIZE(ar231x_eth0_res)
+ },
+ {
+ .id = 1,
+ .name = "ar231x-eth",
+ .resource = ar231x_eth1_res,
+ .num_resources = ARRAY_SIZE(ar231x_eth1_res)
+ }
+};
+
+static struct resource ar231x_wmac0_res[] = {
+ {
+ .name = "wmac0_membase",
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "wmac0_irq",
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource ar231x_wmac1_res[] = {
+ {
+ .name = "wmac1_membase",
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "wmac1_irq",
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+
+static struct platform_device ar231x_wmac[] = {
+ {
+ .id = 0,
+ .name = "ar231x-wmac",
+ .resource = ar231x_wmac0_res,
+ .num_resources = ARRAY_SIZE(ar231x_wmac0_res),
+ .dev.platform_data = &ar231x_board,
+ },
+ {
+ .id = 1,
+ .name = "ar231x-wmac",
+ .resource = ar231x_wmac1_res,
+ .num_resources = ARRAY_SIZE(ar231x_wmac1_res),
+ .dev.platform_data = &ar231x_board,
+ },
+};
+
+static const char *devtype_strings[] = {
+ [DEV_TYPE_AR5312] = "Atheros AR5312",
+ [DEV_TYPE_AR2312] = "Atheros AR2312",
+ [DEV_TYPE_AR2313] = "Atheros AR2313",
+ [DEV_TYPE_AR2315] = "Atheros AR2315",
+ [DEV_TYPE_AR2316] = "Atheros AR2316",
+ [DEV_TYPE_AR2317] = "Atheros AR2317",
+ [DEV_TYPE_UNKNOWN] = "Atheros (unknown)",
+};
+
+const char *get_system_type(void)
+{
+ if ((ar231x_devtype >= ARRAY_SIZE(devtype_strings)) ||
+ !devtype_strings[ar231x_devtype])
+ return devtype_strings[DEV_TYPE_UNKNOWN];
+ return devtype_strings[ar231x_devtype];
+}
+
+
+int __init
+ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata)
+{
+ struct resource *res;
+
+ ar231x_eth[nr].dev.platform_data = pdata;
+ res = &ar231x_eth[nr].resource[0];
+ res->start = base;
+ res->end = base + 0x2000 - 1;
+ res++;
+ res->start = irq;
+ res->end = irq;
+ return platform_device_register(&ar231x_eth[nr]);
+}
+
+void __init
+ar231x_serial_setup(u32 mapbase, unsigned int uartclk)
+{
+ struct uart_port s;
+
+ memset(&s, 0, sizeof(s));
+
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+ s.iotype = UPIO_MEM;
+ s.irq = AR531X_MISC_IRQ_UART0;
+ s.regshift = 2;
+ s.mapbase = mapbase;
+ s.uartclk = uartclk;
+ s.membase = (void __iomem *)s.mapbase;
+
+ early_serial_setup(&s);
+}
+
+int __init
+ar231x_add_wmac(int nr, u32 base, int irq)
+{
+ struct resource *res;
+
+ ar231x_wmac[nr].dev.platform_data = &ar231x_board;
+ res = &ar231x_wmac[nr].resource[0];
+ res->start = base;
+ res->end = base + 0x10000 - 1;
+ res++;
+ res->start = irq;
+ res->end = irq;
+ return platform_device_register(&ar231x_wmac[nr]);
+}
+
+static int __init ar231x_register_devices(void)
+{
+ static struct resource res = {
+ .start = 0xFFFFFFFF,
+ };
+
+ platform_device_register_simple("GPIODEV", 0, &res, 1);
+ ar5312_init_devices();
+ ar2315_init_devices();
+
+ return 0;
+}
+
+device_initcall(ar231x_register_devices);
View Git Blame Copy Permalink