| .. |
|
ar71xx.c
|
ar71xx: add support for ar7241 and ar7242
|
2010-03-26 22:35:41 +00:00 |
|
dev-ap91-pci.c
|
ar71xx: update AR7240 PCI code
|
2009-12-20 13:46:23 +00:00 |
|
dev-ap91-pci.h
|
ar71xx: remove unnecessary includes
|
2009-12-25 13:09:00 +00:00 |
|
dev-ap94-pci.c
|
ar71xx/mac80211: add a workaround for the bad signal strength on the WNDR3700
|
2010-02-09 16:27:35 +00:00 |
|
dev-ap94-pci.h
|
ar71xx/mac80211: add a workaround for the bad signal strength on the WNDR3700
|
2010-02-09 16:27:35 +00:00 |
|
dev-ar913x-wmac.c
|
ar71xx: merge AR71XX_IRQ_CPU_{PCI,WMAC} into AR71XX_IRQ_CPU_IP2
|
2010-03-18 19:18:46 +00:00 |
|
dev-ar913x-wmac.h
|
ar71xx: pass eeprom and mac address location to the ar913x_add_device_wmac function
|
2009-12-27 20:59:50 +00:00 |
|
dev-dsa.c
|
ar71xx: move dsa switch device support into a separate file
|
2009-12-26 14:19:26 +00:00 |
|
dev-dsa.h
|
ar71xx: move dsa switch device support into a separate file
|
2009-12-26 14:19:26 +00:00 |
|
dev-gpio-buttons.c
|
ar71xx: move gpio-buttons support into a spearate file
|
2009-12-26 14:19:01 +00:00 |
|
dev-gpio-buttons.h
|
ar71xx: move gpio-buttons support into a spearate file
|
2009-12-26 14:19:01 +00:00 |
|
dev-leds-gpio.c
|
ar71xx: move leds-gpio device support into a spearate file
|
2009-12-26 14:18:54 +00:00 |
|
dev-leds-gpio.h
|
ar71xx: move leds-gpio device support into a spearate file
|
2009-12-26 14:18:54 +00:00 |
|
dev-m25p80.c
|
ar71xx: add common m25p80 device
|
2009-12-18 12:56:55 +00:00 |
|
dev-m25p80.h
|
ar71xx: add common m25p80 device
|
2009-12-18 12:56:55 +00:00 |
|
dev-pb9x-pci.c
|
ar71xx: add basic kernel support for pb92
|
2010-03-26 22:35:52 +00:00 |
|
dev-pb9x-pci.h
|
ar71xx: add basic kernel support for pb92
|
2010-03-26 22:35:52 +00:00 |
|
dev-pb42-pci.c
|
ar71xx: move PB42 specific PCI init code into a separate file
|
2009-12-25 13:09:04 +00:00 |
|
dev-pb42-pci.h
|
ar71xx: move PB42 specific PCI init code into a separate file
|
2009-12-25 13:09:04 +00:00 |
|
dev-usb.c
|
ar71xx: add support for ar7241 and ar7242
|
2010-03-26 22:35:41 +00:00 |
|
dev-usb.h
|
ar71xx: move USB host device support into a separate file
|
2009-12-26 14:19:13 +00:00 |
|
devices.c
|
ar71xx: reset the mdio bus on ar7241/ar7242
|
2010-03-28 00:35:44 +00:00 |
|
devices.h
|
ar71xx: move dsa switch device support into a separate file
|
2009-12-26 14:19:26 +00:00 |
|
early_printk.c
|
[ar71xx] move early_printk stuff into a separate file
|
2009-08-26 07:31:04 +00:00 |
|
gpio.c
|
ar71xx: add support for ar7241 and ar7242
|
2010-03-26 22:35:41 +00:00 |
|
irq.c
|
[backfire] ar71xx: backport pci/dma fix from r21143
|
2010-04-27 18:50:56 +00:00 |
|
Kconfig
|
ar71xx: merge ap91_eth removal from r23439
|
2010-10-14 13:49:09 +00:00 |
|
mach-ap81.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
|
mach-ap83.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
|
mach-aw-nr580.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
|
mach-dir-600-a1.c
|
ar71xx: merge ap91_eth removal from r23439
|
2010-10-14 13:49:09 +00:00 |
|
mach-dir-615-c1.c
|
backfire: ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards (backport of r20752)
|
2010-04-09 12:06:12 +00:00 |
|
mach-dir-825-b1.c
|
rtl8366_smi: move RTL8366S driver into a separate file
|
2010-01-22 17:38:07 +00:00 |
|
mach-mzk-w04nu.c
|
backfire: ar71xx: fix firmware partition size on the MZK-W04NU board (backport of r21172)
|
2010-04-28 10:46:21 +00:00 |
|
mach-mzk-w300nh.c
|
backfire: ar71xx: remove config partition from the mtd map on the MZK-W300NH board (backport of r21173)
|
2010-04-28 10:46:28 +00:00 |
|
mach-pb42.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
|
mach-pb44.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
|
mach-pb92.c
|
ar71xx: fix the wan port on pb92
|
2010-03-28 00:36:04 +00:00 |
|
mach-rb4xx.c
|
[backfire] merge r20722
|
2010-04-05 23:06:36 +00:00 |
|
mach-rb750.c
|
ar71xx: merge ap91_eth removal from r23439
|
2010-10-14 13:49:09 +00:00 |
|
mach-tew-632brp.c
|
backfire: ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards (backport of r20752)
|
2010-04-09 12:06:12 +00:00 |
|
mach-tl-wr741nd.c
|
ar71xx: merge ap91_eth removal from r23439
|
2010-10-14 13:49:09 +00:00 |
|
mach-tl-wr841n.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
|
mach-tl-wr941nd.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
|
mach-tl-wr1043nd.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
|
mach-ubnt.c
|
[backfire] merge r20722
|
2010-04-05 23:06:36 +00:00 |
|
mach-wndr3700.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
|
mach-wnr2000.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
|
mach-wp543.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
|
mach-wrt160nl.c
|
ar71xx: reduce button threshold values
|
2010-01-13 10:18:30 +00:00 |
|
mach-wrt400n.c
|
[ar71xx] wrt400n: lan ports don't need the ar8216 workaround
|
2010-03-26 19:09:11 +00:00 |
|
mach-wzr-hp-g300nh.c
|
ar71xx: change PHY select logic, and update phy_masks
|
2010-03-21 18:16:07 +00:00 |
|
machtype.h
|
ar71xx: add basic kernel support for pb92
|
2010-03-26 22:35:52 +00:00 |
|
Makefile
|
ar71xx: merge ap91_eth removal from r23439
|
2010-10-14 13:49:09 +00:00 |
|
nvram.c
|
ar71xx: fix random wireless mac address on the TEW-632BRP/DIR-615 boards
|
2009-12-27 20:59:54 +00:00 |
|
nvram.h
|
ar71xx: fix random wireless mac address on the TEW-632BRP/DIR-615 boards
|
2009-12-27 20:59:54 +00:00 |
|
pci.c
|
ar71xx: add support for ar7241 and ar7242
|
2010-03-26 22:35:41 +00:00 |
|
prom.c
|
ar71xx: use COMMAND_LINE_SIZE
|
2010-03-02 13:36:04 +00:00 |
|
setup.c
|
ar71xx: add support for ar7241 and ar7242
|
2010-03-26 22:35:41 +00:00 |
3b68da568c