mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-28 19:10:37 +02:00
57ffcdaccd
This patch adds support for the Sitecom WL-341 v3 and other Sercomm IP1006RRv2 based boards for sysupgrade support and for the initial flash through pushbutton initiated recovery mode with the special partition table and fixes for the quirks and things required by the modified bootloader. There is a known bug, Wi-Fi is not working on my board probably because of the lack of RAM (the board only has 16MiB ram -- half of the normal amount for non rebadged versions, but there is an empty slot for another ram chip,) but I don't know for sure. The driver loads but hostapd fails to load so I think it's not related to the specific device except for the lack of RAM. Moreover, only 7 of the 11 onboard leds are confirmed working, it seems that one of the others is always on and the remaining ones are connected to the wireless card leds already recognized by OpenWrt [juhosg: reordered some parts in order to keep things sorted alphabetically] Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29910 3c298f89-4303-0410-b956-a3cf2f4a3e73
112 lines
2.6 KiB
Plaintext
112 lines
2.6 KiB
Plaintext
if RALINK_RT305X
|
|
|
|
menu "Ralink RT350x machine selection"
|
|
|
|
config RT305X_MACH_ALL0256N
|
|
bool "Allnet ALL0256N support"
|
|
select RALINK_DEV_GPIO_BUTTONS
|
|
select RALINK_DEV_GPIO_LEDS
|
|
|
|
config RT305X_MACH_W502U
|
|
bool "ALFA Networks W502U board support"
|
|
select RALINK_DEV_GPIO_BUTTONS
|
|
select RALINK_DEV_GPIO_LEDS
|
|
|
|
config RT305X_MACH_ARGUS_ATP52B
|
|
bool "Argus ATP-52B support"
|
|
select RALINK_DEV_GPIO_BUTTONS
|
|
select RALINK_DEV_GPIO_LEDS
|
|
|
|
config RT305X_MACH_RT_G32_REVB
|
|
bool "Asus RT-G32 revB board support"
|
|
select RALINK_DEV_GPIO_BUTTONS
|
|
|
|
config RT305X_MACH_HW550_3G
|
|
bool "Aztech HW550-3G support"
|
|
select RALINK_DEV_GPIO_BUTTONS
|
|
select RALINK_DEV_GPIO_LEDS
|
|
|
|
config RT305X_MACH_F5D8235_V2
|
|
bool "Belkin F5D8235 v2 support"
|
|
select RALINK_DEV_GPIO_BUTTONS
|
|
select RALINK_DEV_GPIO_LEDS
|
|
|
|
config RT305X_MACH_WHR_G300N
|
|
bool "Buffalo WHR-G300N support"
|
|
select RALINK_DEV_GPIO_BUTTONS
|
|
select RALINK_DEV_GPIO_LEDS
|
|
|
|
config RT305X_MACH_DIR_300_REVB
|
|
bool "D-Link DIR-300 revB board support"
|
|
select RALINK_DEV_GPIO_BUTTONS
|
|
select RALINK_DEV_GPIO_LEDS
|
|
|
|
config RT305X_MACH_ESR_9753
|
|
bool "EnGenius ESR-9753 support"
|
|
select RALINK_DEV_GPIO_BUTTONS
|
|
select RALINK_DEV_GPIO_LEDS
|
|
|
|
config RT305X_MACH_FONERA20N
|
|
bool "La Fonera20N board support"
|
|
select RALINK_DEV_GPIO_BUTTONS
|
|
select RALINK_DEV_GPIO_LEDS
|
|
|
|
config RT305X_MACH_MOFI3500_3GN
|
|
bool "MoFi Network MOFI3500-3GN support"
|
|
select RALINK_DEV_GPIO_BUTTONS
|
|
select RALINK_DEV_GPIO_LEDS
|
|
|
|
config RT305X_MACH_WR512_3GN
|
|
bool "SH-WR512NU/WS-WR512N1-like 3GN router"
|
|
select RALINK_DEV_GPIO_BUTTONS
|
|
select RALINK_DEV_GPIO_LEDS
|
|
|
|
config RT305X_MACH_NW718
|
|
bool "Netcore NW718"
|
|
select RALINK_DEV_GPIO_BUTTONS
|
|
select RALINK_DEV_GPIO_LEDS
|
|
|
|
config RT305X_MACH_BC2
|
|
bool "NexAira BC2"
|
|
select RALINK_DEV_GPIO_BUTTONS
|
|
select RALINK_DEV_GPIO_LEDS
|
|
|
|
config RT305X_MACH_OMNI_EMB
|
|
bool "Omnima MiniEMBWiFi"
|
|
select RALINK_DEV_GPIO_BUTTONS
|
|
select RALINK_DEV_GPIO_LEDS
|
|
|
|
config RT305X_MACH_PWH2004
|
|
bool "Prolink PWH2004 / Abocom WR5205 support (32M RAM, 8M flash)"
|
|
select RALINK_DEV_GPIO_BUTTONS
|
|
select RALINK_DEV_GPIO_LEDS
|
|
|
|
config RT305X_MACH_V22RW_2X2
|
|
bool "Ralink AP-RT3052-V22RW-2X2 board support"
|
|
select RALINK_DEV_GPIO_BUTTONS
|
|
select RALINK_DEV_GPIO_LEDS
|
|
|
|
config RT305X_MACH_WL341V3
|
|
bool "Sitecom WL-341 v3 board support"
|
|
select RALINK_DEV_GPIO_BUTTONS
|
|
select RALINK_DEV_GPIO_LEDS
|
|
|
|
config RT305X_MACH_WL351
|
|
bool "Sitecom WL-351 support"
|
|
select RALINK_DEV_GPIO_BUTTONS
|
|
select RALINK_DEV_GPIO_LEDS
|
|
|
|
config RT305X_MACH_WCR150GN
|
|
bool "Sparklan WCR-150GN support"
|
|
select RALINK_DEV_GPIO_BUTTONS
|
|
select RALINK_DEV_GPIO_LEDS
|
|
|
|
config RT305X_MACH_NBG_419N
|
|
bool "ZyXEL NBG-419N support"
|
|
select RALINK_DEV_GPIO_BUTTONS
|
|
select RALINK_DEV_GPIO_LEDS
|
|
|
|
endmenu
|
|
|
|
endif
|