qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-27 05:19:34 +02:00
Code
b766f54386
openwrt-xburst/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch
florian efc4676a28 Make 6348 as the default target, yeah, what a fix :/ 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-01-05 15:31:39 +00:00

9640 lines
353 KiB
Diff
Raw Blame History

diff -urN linux-2.6.19/arch/mips/Kconfig linux-2.6.19.new/arch/mips/Kconfig
--- linux-2.6.19/arch/mips/Kconfig 2006-11-29 22:57:37.000000000 +0100
+++ linux-2.6.19.new/arch/mips/Kconfig 2006-12-16 18:46:31.000000000 +0100
@@ -12,6 +12,15 @@
prompt "System type"
default SGI_IP22
+config BCM963XX
+ bool "Support for the Broadcom boards"
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_HAS_CPU_MIPS32_R1
+ select IRQ_CPU
+ help
+ This is a fmaily of boards based on the Broadcom MIPS32
+
config MIPS_MTX1
bool "4G Systems MTX-1 board"
select DMA_NONCOHERENT
@@ -766,6 +775,7 @@
endchoice
+source "arch/mips/bcm963xx/Kconfig"
source "arch/mips/ddb5xxx/Kconfig"
source "arch/mips/gt64120/ev64120/Kconfig"
source "arch/mips/jazz/Kconfig"
diff -urN linux-2.6.19/arch/mips/Makefile linux-2.6.19.new/arch/mips/Makefile
--- linux-2.6.19/arch/mips/Makefile 2006-12-16 17:36:29.000000000 +0100
+++ linux-2.6.19.new/arch/mips/Makefile 2006-12-16 18:46:31.000000000 +0100
@@ -158,6 +158,15 @@
#
#
+# Broadcom board
+#
+core-$(CONFIG_BCM963XX) += arch/mips/bcm963xx/
+cflags-$(CONFIG_BCM963XX) += -Iinclude/asm-mips/mach-bcm963xx
+cflags-$(CONFIG_BCM963XX) += -Iarch/mips/bcm963xx/include
+load-$(CONFIG_BCM963XX) += 0xffffffff80010000
+
+
+#
# Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
#
core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
diff -urN linux-2.6.19/arch/mips/bcm963xx/Kconfig linux-2.6.19.new/arch/mips/bcm963xx/Kconfig
--- linux-2.6.19/arch/mips/bcm963xx/Kconfig 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/Kconfig 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,138 @@
+# Kernel and Driver configuration for Broadcom Commengine ADSL board
+choice
+ prompt "Broadcom Commengine ADSL board"
+ depends on BCM963XX
+ default BCM96348
+ help
+ Select different Broadcom ADSL board
+
+config BCM96338
+ bool "96338 ADSL board"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+
+config BCM96345
+ bool "96345 ADSL board"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+
+config BCM96348
+ bool "96348 ADSL board"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+
+endchoice
+
+config BCM_BOARD
+ bool "Support for Broadcom Board"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_SERIAL
+ bool "Support for Serial Port"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_ENET
+ tristate "Support for Ethernet"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_USB
+ tristate "Support for USB"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_WLAN
+ tristate "Support for Wireless"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_PCI
+ bool "Support for PCI"
+ depends on BCM96338 || BCM96345 || BCM96348
+ select PCI
+
+config BCM_ATMAPI
+ tristate "Support for ATM"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_ATMTEST
+ tristate "Support for ATM Diagnostic"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_ADSL
+ tristate "Support for ADSL"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_ENDPOINT
+ tristate "Support for VOICE"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_PROCFS
+ tristate "Support for PROCFS"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_VDSL
+ tristate "Support for VDSL"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_SECURITY
+ tristate "Support for SECURITY"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_HPNA
+ tristate "Support for HPNA"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_BOARD_IMPL
+ int "Implementation index for ADSL Board"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_SERIAL_IMPL
+ int "Implementation index for Serial"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_ENET_IMPL
+ int "Implementation index for Ethernet"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_USB_IMPL
+ int "Implementation index for USB"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_WLAN_IMPL
+ int "Implementation index for WIRELESS"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_ATMAPI_IMPL
+ int "Implementation index for ATM"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_ATMTEST_IMPL
+ int "Implementation index for ATM Diagnostic"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_BLAA_IMPL
+ int "Implementation index for BLAA"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_ADSL_IMPL
+ int "Implementation index for ADSL"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_ENDPOINT_IMPL
+ int "Implementation index for VOICE"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_PROCFS_IMPL
+ int "Implementation index for PROCFS"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_VDSL_IMPL
+ int "Implementation index for VDSL"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_SECURITY_IMPL
+ int "Implementation index for SECURITY"
+ depends on BCM96338 || BCM96345 || BCM96348
+
+config BCM_HPNA_IMPL
+ int "Implementation index for HPNA"
+ depends on BCM96338 || BCM96345 || BCM96348
+
diff -urN linux-2.6.19/arch/mips/bcm963xx/Makefile linux-2.6.19.new/arch/mips/bcm963xx/Makefile
--- linux-2.6.19/arch/mips/bcm963xx/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/Makefile 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,23 @@
+#
+# Makefile for generic Broadcom MIPS boards
+#
+# Copyright (C) 2004 Broadcom Corporation
+#
+obj-y := irq.o prom.o setup.o time.o ser_init.o bcm63xx_led.o board.o boardparms.o int-handler.o
+
+SRCBASE := $(TOPDIR)
+EXTRA_CFLAGS += -I$(SRCBASE)/include
+#EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) -DDBG
+EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH)
+
+
+ifeq "$(ADSL)" "ANNEX_B"
+EXTRA_CFLAGS += -DADSL_ANNEXB
+endif
+ifeq "$(ADSL)" "SADSL"
+EXTRA_CFLAGS += -DADSL_SADSL
+endif
+ifeq "$(ADSL)" "ANNEX_C"
+EXTRA_CFLAGS += -DADSL_ANNEXC
+endif
+
diff -urN linux-2.6.19/arch/mips/bcm963xx/bcm63xx_led.c linux-2.6.19.new/arch/mips/bcm963xx/bcm63xx_led.c
--- linux-2.6.19/arch/mips/bcm963xx/bcm63xx_led.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/bcm63xx_led.c 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,582 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+/***************************************************************************
+ * File Name : bcm63xx_led.c
+ *
+ * Description:
+ *
+ * This file contains bcm963xx board led control API functions.
+ *
+ * To use it, do the following
+ *
+ * 1). define in the board.c the following led mappping (this is for 6345GW board):
+ * const LED_MAP_PAIR cLedMapping45GW[] =
+ * { // led name Initial state physical pin (ledMask)
+ * {kLedUsb, kLedStateOff, GPIO_LED_PIN_7},
+ * {kLedAdsl, kLedStateOff, GPIO_LED_PIN_8},
+ * {kLedPPP, kLedStateOff, GPIO_LED_PIN_9}, // PPP and WanData share PIN_9
+ * {kLedWanData, kLedStateOff, GPIO_LED_PIN_9},
+ * {kLedWireless, kLedStateOff, GPIO_LED_PIN_10},
+ * {kLedEnd, kLedStateOff, 0 } // NOTE: kLedEnd has to be at the end.
+ *
+ * 2). };To initialize led API and initial state of the leds, call the following function with the mapping
+ * pointer from the above struct
+ *
+ * boardLedInit((PLED_MAP_PAIR) &cLedMapping45R);
+ *
+ * 3). Sample call for kernel mode:
+ *
+ * kerSysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board.h
+ *
+ * 4). Sample call for user mode
+ *
+ * sysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board_api.h
+ *
+ *
+ * Created on : 10/28/2002 seanl
+ *
+ ***************************************************************************/
+
+/* Includes. */
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/capability.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <asm/uaccess.h>
+
+#include <bcm_map_part.h>
+#include <board.h>
+
+#define k100ms (HZ / 10) // ~100 ms
+#define kFastBlinkCount 0 // ~100ms
+#define kSlowBlinkCount 5 // ~600ms
+
+#define MAX_VIRT_LEDS 12
+
+// uncomment // for debug led
+//#define DEBUG_LED
+
+// global variables:
+struct timer_list gLedTimer;
+int gTimerOn = FALSE;
+int gLedCount = 0;
+
+typedef struct ledinfo
+{
+ unsigned short ledMask; // mask for led: ie. giop 10 = 0x0400
+ unsigned short ledActiveLow; // GPIO bit reset to turn on LED
+ unsigned short ledMaskFail; // mask for led: ie. giop 10 = 0x0400
+ unsigned short ledActiveLowFail;// GPIO bit reset to turn on LED
+ BOARD_LED_STATE ledState; // current led state
+ BOARD_LED_STATE savedLedState; // used in blink once for restore to the orignal ledState
+ int blinkCountDown; // if == 0, do blink (toggle). Is assgined value and dec by 1 at each timer.
+} LED_INFO, *PLED_INFO;
+
+static PLED_INFO gLed = NULL;
+static PLED_INFO gpVirtLeds[MAX_VIRT_LEDS];
+static HANDLE_LED_FUNC gLedHwFunc[MAX_VIRT_LEDS];
+static HANDLE_LED_FUNC gLedHwFailFunc[MAX_VIRT_LEDS];
+
+#if 0 /* BROKEN */
+#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
+static int gLedOffInBridgeMode = 1;
+#elif defined(CONFIG_BCM96345)
+static int gLedOffInBridgeMode = 0;
+#endif
+#endif
+
+void ledTimerExpire(void);
+int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed );
+
+//**************************************************************************************
+// LED operations
+//**************************************************************************************
+
+// turn led on and set the ledState
+void ledOn(PLED_INFO pLed)
+{
+ if( pLed->ledMask )
+ {
+ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one
+ if( pLed->ledActiveLow )
+ GPIO->GPIOio &= ~pLed->ledMask; // turn on the led
+ else
+ GPIO->GPIOio |= pLed->ledMask; // turn on the led
+ pLed->ledState = pLed->savedLedState = kLedStateOn;
+ }
+}
+
+
+// turn led off and set the ledState
+void ledOff(PLED_INFO pLed)
+{
+ if( pLed->ledMask )
+ {
+ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one
+ if( pLed->ledActiveLow )
+ GPIO->GPIOio |= pLed->ledMask; // turn off the led
+ else
+ GPIO->GPIOio &= ~pLed->ledMask; // turn off the led
+ pLed->ledState = pLed->savedLedState = kLedStateOff;
+ }
+}
+
+// turn led on and set the ledState
+void ledOnFail(PLED_INFO pLed)
+{
+ if( pLed->ledMaskFail )
+ {
+ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one
+ if( pLed->ledActiveLowFail )
+ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn on the led
+ else
+ GPIO->GPIOio |= pLed->ledMaskFail; // turn on the led
+ pLed->ledState = pLed->savedLedState = kLedStateFail;
+ }
+}
+
+
+// turn led off and set the ledState
+void ledOffFail(PLED_INFO pLed)
+{
+ if( pLed->ledMaskFail )
+ {
+ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one
+ if( pLed->ledActiveLowFail )
+ GPIO->GPIOio |= pLed->ledMaskFail; // turn off the led
+ else
+ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn off the led
+ pLed->ledState = pLed->savedLedState = kLedStateOff;
+ }
+}
+
+
+// toggle the led and return the current ledState
+BOARD_LED_STATE ledToggle(PLED_INFO pLed)
+{
+ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one
+ if (GPIO->GPIOio & pLed->ledMask)
+ {
+ GPIO->GPIOio &= ~(pLed->ledMask);
+ return( (pLed->ledActiveLow) ? kLedStateOn : kLedStateOff );
+ }
+ else
+ {
+ GPIO->GPIOio |= pLed->ledMask;
+ return( (pLed->ledActiveLow) ? kLedStateOff : kLedStateOn );
+ }
+}
+
+
+// led timer. Will return if timer is already on
+void ledTimerStart(void)
+{
+ if (gTimerOn)
+ return;
+
+#if defined(DEBUG_LED)
+ printk("led: add_timer\n");
+#endif
+
+ init_timer(&gLedTimer);
+ gLedTimer.function = (void*)ledTimerExpire;
+ gLedTimer.expires = jiffies + k100ms; // timer expires in ~100ms
+ add_timer (&gLedTimer);
+ gTimerOn = TRUE;
+}
+
+
+// led timer expire kicks in about ~100ms and perform the led operation according to the ledState and
+// restart the timer according to ledState
+void ledTimerExpire(void)
+{
+ int i;
+ PLED_INFO pCurLed;
+
+ gTimerOn = FALSE;
+
+ for (i = 0, pCurLed = gLed; i < gLedCount; i++, pCurLed++)
+ {
+#if defined(DEBUG_LED)
+ printk("led[%d]: Mask=0x%04x, State = %d, blcd=%d\n", i, pCurLed->ledMask, pCurLed->ledState, pCurLed->blinkCountDown);
+#endif
+ switch (pCurLed->ledState)
+ {
+ case kLedStateOn:
+ case kLedStateOff:
+ case kLedStateFail:
+ pCurLed->blinkCountDown = 0; // reset the blink count down
+ break;
+
+ case kLedStateBlinkOnce:
+ ledToggle(pCurLed);
+ pCurLed->blinkCountDown = 0; // reset to 0
+ pCurLed->ledState = pCurLed->savedLedState;
+ if (pCurLed->ledState == kLedStateSlowBlinkContinues ||
+ pCurLed->ledState == kLedStateFastBlinkContinues)
+ ledTimerStart(); // start timer if in blinkContinues stats
+ break;
+
+ case kLedStateSlowBlinkContinues:
+ if (pCurLed->blinkCountDown-- == 0)
+ {
+ pCurLed->blinkCountDown = kSlowBlinkCount;
+ ledToggle(pCurLed);
+ }
+ ledTimerStart();
+ break;
+
+ case kLedStateFastBlinkContinues:
+ if (pCurLed->blinkCountDown-- == 0)
+ {
+ pCurLed->blinkCountDown = kFastBlinkCount;
+ ledToggle(pCurLed);
+ }
+ ledTimerStart();
+ break;
+
+ default:
+ printk("Invalid state = %d\n", pCurLed->ledState);
+ }
+ }
+}
+
+// initialize the gLedCount and allocate and fill gLed struct
+void __init boardLedInit(PLED_MAP_PAIR cLedMapping)
+{
+ PLED_MAP_PAIR p1, p2;
+ PLED_INFO pCurLed;
+ int needTimer = FALSE;
+ int alreadyUsed = 0;
+
+#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
+ /* Set blink rate for BCM6348/BCM6338 hardware LEDs. */
+ GPIO->LEDCtrl &= ~LED_INTERVAL_SET_MASK;
+ GPIO->LEDCtrl |= LED_INTERVAL_SET_80MS;
+#endif
+
+ memset( gpVirtLeds, 0x00, sizeof(gpVirtLeds) );
+ memset( gLedHwFunc, 0x00, sizeof(gLedHwFunc) );
+ memset( gLedHwFailFunc, 0x00, sizeof(gLedHwFailFunc) );
+
+ gLedCount = 0;
+
+ // Check for multiple LED names and multiple LED GPIO pins that share the
+ // same physical board LED.
+ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ )
+ {
+ alreadyUsed = 0;
+ for( p2 = cLedMapping; p2 != p1; p2++ )
+ {
+ if( (p1->ledMask && p1->ledMask == p2->ledMask) ||
+ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) )
+ {
+ alreadyUsed = 1;
+ break;
+ }
+ }
+
+ if( alreadyUsed == 0 )
+ gLedCount++;
+ }
+
+ gLed = (PLED_INFO) kmalloc((gLedCount * sizeof(LED_INFO)), GFP_KERNEL);
+ if( gLed == NULL )
+ {
+ printk( "LED memory allocation error.\n" );
+ return;
+ }
+
+ memset( gLed, 0x00, gLedCount * sizeof(LED_INFO) );
+
+ // initial the gLed with unique ledMask and initial state. If more than 1 ledNames share the physical led
+ // (ledMask) the first defined led's ledInitState will be used.
+ pCurLed = gLed;
+ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ )
+ {
+ if( (int) p1->ledName > MAX_VIRT_LEDS )
+ continue;
+
+ alreadyUsed = 0;
+ for( p2 = cLedMapping; p2 != p1; p2++ )
+ {
+ if( (p1->ledMask && p1->ledMask == p2->ledMask) ||
+ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) )
+ {
+ alreadyUsed = 1;
+ break;
+ }
+ }
+
+ if( alreadyUsed == 0 )
+ {
+ // Initialize the board LED for the first time.
+ needTimer = initLedInfo( p1, pCurLed );
+ gpVirtLeds[(int) p1->ledName] = pCurLed;
+ pCurLed++;
+ }
+ else
+ {
+ PLED_INFO pLed;
+ for( pLed = gLed; pLed != pCurLed; pLed++ )
+ {
+ // Find the LED_INFO structure that has already been initialized.
+ if((pLed->ledMask && pLed->ledMask == p1->ledMask) ||
+ (pLed->ledMaskFail && pLed->ledMaskFail==p1->ledMaskFail))
+ {
+ // The board LED has already been initialized but possibly
+ // not completely initialized.
+ if( p1->ledMask )
+ {
+ pLed->ledMask = p1->ledMask;
+ pLed->ledActiveLow = p1->ledActiveLow;
+ }
+ if( p1->ledMaskFail )
+ {
+ pLed->ledMaskFail = p1->ledMaskFail;
+ pLed->ledActiveLowFail = p1->ledActiveLowFail;
+ }
+ gpVirtLeds[(int) p1->ledName] = pLed;
+ break;
+ }
+ }
+ }
+ }
+
+ if (needTimer)
+ ledTimerStart();
+
+#if defined(DEBUG_LED)
+ int i;
+ for (i=0; i < gLedCount; i++)
+ printk("initLed: led[%d]: mask=0x%04x, state=%d\n", i,(gLed+i)->ledMask, (gLed+i)->ledState);
+#endif
+
+}
+
+// Initialize a structure that contains information about a physical board LED
+// control. The board LED may contain more than one GPIO pin to control a
+// normal condition (green) or a failure condition (red).
+int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed )
+{
+ int needTimer = FALSE;
+ pCurLed->ledState = pCurLed->savedLedState = pCurMap->ledInitState;
+ pCurLed->ledMask = pCurMap->ledMask;
+ pCurLed->ledActiveLow = pCurMap->ledActiveLow;
+ pCurLed->ledMaskFail = pCurMap->ledMaskFail;
+ pCurLed->ledActiveLowFail = pCurMap->ledActiveLowFail;
+
+ switch (pCurLed->ledState)
+ {
+ case kLedStateOn:
+ pCurLed->blinkCountDown = 0; // reset the blink count down
+ ledOn(pCurLed);
+ break;
+ case kLedStateOff:
+ pCurLed->blinkCountDown = 0; // reset the blink count down
+ ledOff(pCurLed);
+ break;
+ case kLedStateFail:
+ pCurLed->blinkCountDown = 0; // reset the blink count down
+ ledOnFail(pCurLed);
+ break;
+ case kLedStateBlinkOnce:
+ pCurLed->blinkCountDown = 1;
+ needTimer = TRUE;
+ break;
+ case kLedStateSlowBlinkContinues:
+ pCurLed->blinkCountDown = kSlowBlinkCount;
+ needTimer = TRUE;
+ break;
+ case kLedStateFastBlinkContinues:
+ pCurLed->blinkCountDown = kFastBlinkCount;
+ needTimer = TRUE;
+ break;
+ default:
+ printk("Invalid state = %d\n", pCurLed->ledState);
+ }
+
+ return( needTimer );
+}
+
+#if 0 /* BROKEN */
+// Determines if there is at least one interface in bridge mode. Bridge mode
+// is determined by the cfm convention of naming bridge interfaces nas17
+// through nas24.
+static int isBridgedProtocol(void)
+{
+ extern int dev_get(const char *name);
+ const int firstBridgeId = 17;
+ const int lastBridgeId = 24;
+ int i;
+ int ret = FALSE;
+ char name[16];
+
+ for( i = firstBridgeId; i <= lastBridgeId; i++ )
+ {
+ sprintf( name, "nas%d", i );
+
+ if( dev_get(name) )
+ {
+ ret = TRUE;
+ break;
+ }
+ }
+
+ return(ret);
+}
+#endif
+
+// led ctrl. Maps the ledName to the corresponding ledInfoPtr and perform the led operation
+void boardLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState)
+{
+ PLED_INFO ledInfoPtr;
+
+ // do the mapping from virtual to physical led
+ if( (int) ledName < MAX_VIRT_LEDS )
+ ledInfoPtr = gpVirtLeds[(int) ledName];
+ else
+ ledInfoPtr = NULL;
+
+ if (ledInfoPtr == NULL)
+ return;
+
+ if( ledState != kLedStateFail && gLedHwFunc[(int) ledName] )
+ {
+ (*gLedHwFunc[(int) ledName]) (ledName, ledState);
+ ledOffFail(ledInfoPtr);
+ return;
+ }
+ else
+ if( ledState == kLedStateFail && gLedHwFailFunc[(int) ledName] )
+ {
+ (*gLedHwFailFunc[(int) ledName]) (ledName, ledState);
+ ledOff(ledInfoPtr);
+ return;
+ }
+
+#if 0 /* BROKEN */
+ // Do not blink the WAN Data LED if at least one interface is in bridge mode.
+ if(gLedOffInBridgeMode == 1 && (ledName == kLedWanData || ledName == kLedPPP))
+ {
+ static int BridgedProtocol = -1;
+
+ if( BridgedProtocol == -1 )
+ BridgedProtocol = isBridgedProtocol();
+
+ if( BridgedProtocol == TRUE )
+ return;
+ }
+#endif
+
+ // If the state is kLedStateFail and there is not a failure LED defined
+ // in the board parameters, change the state to kLedStateFastBlinkContinues.
+ if( ledState == kLedStateFail && ledInfoPtr->ledMaskFail == 0 )
+ ledState = kLedStateFastBlinkContinues;
+
+ switch (ledState)
+ {
+ case kLedStateOn:
+ // First, turn off the complimentary (failure) LED GPIO.
+ if( ledInfoPtr->ledMaskFail )
+ ledOffFail(ledInfoPtr);
+ else
+ if( gLedHwFailFunc[(int) ledName] )
+ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff);
+
+ // Next, turn on the specified LED GPIO.
+ ledOn(ledInfoPtr);
+ break;
+
+ case kLedStateOff:
+ // First, turn off the complimentary (failure) LED GPIO.
+ if( ledInfoPtr->ledMaskFail )
+ ledOffFail(ledInfoPtr);
+ else
+ if( gLedHwFailFunc[(int) ledName] )
+ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff);
+
+ // Next, turn off the specified LED GPIO.
+ ledOff(ledInfoPtr);
+ break;
+
+ case kLedStateFail:
+ // First, turn off the complimentary (normal) LED GPIO.
+ if( ledInfoPtr->ledMask )
+ ledOff(ledInfoPtr);
+ else
+ if( gLedHwFunc[(int) ledName] )
+ (*gLedHwFunc[(int) ledName]) (ledName, kLedStateOff);
+
+ // Next, turn on (red) the specified LED GPIO.
+ ledOnFail(ledInfoPtr);
+ break;
+
+ case kLedStateBlinkOnce:
+ // skip blinkOnce if it is already in Slow/Fast blink continues state
+ if (ledInfoPtr->savedLedState == kLedStateSlowBlinkContinues ||
+ ledInfoPtr->savedLedState == kLedStateFastBlinkContinues)
+ ;
+ else
+ {
+ if (ledInfoPtr->blinkCountDown == 0) // skip the call if it is 1
+ {
+ ledToggle(ledInfoPtr);
+ ledInfoPtr->blinkCountDown = 1; // it will be reset to 0 when timer expires
+ ledInfoPtr->ledState = kLedStateBlinkOnce;
+ ledTimerStart();
+ }
+ }
+ break;
+
+ case kLedStateSlowBlinkContinues:
+ ledInfoPtr->blinkCountDown = kSlowBlinkCount;
+ ledInfoPtr->ledState = kLedStateSlowBlinkContinues;
+ ledInfoPtr->savedLedState = kLedStateSlowBlinkContinues;
+ ledTimerStart();
+ break;
+
+ case kLedStateFastBlinkContinues:
+ ledInfoPtr->blinkCountDown = kFastBlinkCount;
+ ledInfoPtr->ledState = kLedStateFastBlinkContinues;
+ ledInfoPtr->savedLedState = kLedStateFastBlinkContinues;
+ ledTimerStart();
+ break;
+
+ default:
+ printk("Invalid led state\n");
+ }
+}
+
+// This function is called for an LED that is controlled by hardware.
+void kerSysLedRegisterHwHandler( BOARD_LED_NAME ledName,
+ HANDLE_LED_FUNC ledHwFunc, int ledFailType )
+{
+ if( (int) ledName < MAX_VIRT_LEDS )
+ {
+ if( ledFailType == 1 )
+ gLedHwFailFunc[(int) ledName] = ledHwFunc;
+ else
+ gLedHwFunc[(int) ledName] = ledHwFunc;
+ }
+}
+
diff -urN linux-2.6.19/arch/mips/bcm963xx/board.c linux-2.6.19.new/arch/mips/bcm963xx/board.c
--- linux-2.6.19/arch/mips/bcm963xx/board.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/board.c 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,559 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+/* Includes. */
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/capability.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/pagemap.h>
+#include <asm/uaccess.h>
+#include <linux/wait.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/list.h>
+#include <linux/if.h>
+#include <linux/spinlock.h>
+
+#include <bcm_map_part.h>
+#include <board.h>
+#include <bcmTag.h>
+#include "boardparms.h"
+#include "bcm_intr.h"
+#include "board.h"
+#include "bcm_map_part.h"
+
+static DEFINE_SPINLOCK(board_lock);
+
+/* Typedefs. */
+#if defined (NON_CONSECUTIVE_MAC)
+// used to be the last octet. Now changed to the first 5 bits of the the forth octet
+// to reduced the duplicated MAC addresses.
+#define CHANGED_OCTET 3
+#define SHIFT_BITS 3
+#else
+#define CHANGED_OCTET 1
+#define SHIFT_BITS 0
+#endif
+
+typedef struct
+{
+ unsigned long ulId;
+ char chInUse;
+ char chReserved[3];
+} MAC_ADDR_INFO, *PMAC_ADDR_INFO;
+
+typedef struct
+{
+ unsigned long ulSdramSize;
+ unsigned long ulPsiSize;
+ unsigned long ulNumMacAddrs;
+ unsigned long ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN];
+ MAC_ADDR_INFO MacAddrs[1];
+} NVRAM_INFO, *PNVRAM_INFO;
+
+typedef struct
+{
+ unsigned long eventmask;
+} BOARD_IOC, *PBOARD_IOC;
+
+
+/*Dyinggasp callback*/
+typedef void (*cb_dgasp_t)(void *arg);
+typedef struct _CB_DGASP__LIST
+{
+ struct list_head list;
+ char name[IFNAMSIZ];
+ cb_dgasp_t cb_dgasp_fn;
+ void *context;
+}CB_DGASP_LIST , *PCB_DGASP_LIST;
+
+
+static LED_MAP_PAIR LedMapping[] =
+{ // led name Initial state physical pin (ledMask)
+ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
+ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
+ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
+ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
+ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
+ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
+ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
+ {kLedEnd, kLedStateOff, 0, 0, 0, 0},
+ {kLedEnd, kLedStateOff, 0, 0, 0, 0} // NOTE: kLedEnd has to be at the end.
+};
+
+/* Externs. */
+extern struct file fastcall *fget_light(unsigned int fd, int *fput_needed);
+extern unsigned int nr_free_pages (void);
+extern const char *get_system_type(void);
+extern void kerSysFlashInit(void);
+extern unsigned long get_nvram_start_addr(void);
+extern unsigned long get_scratch_pad_start_addr(void);
+extern unsigned long getMemorySize(void);
+extern void __init boardLedInit(PLED_MAP_PAIR);
+extern void boardLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE);
+extern void kerSysLedRegisterHandler( BOARD_LED_NAME ledName,
+ HANDLE_LED_FUNC ledHwFunc, int ledFailType );
+
+/* Prototypes. */
+void __init InitNvramInfo( void );
+
+/* DyingGasp function prototype */
+static void __init kerSysDyingGaspMapIntr(void);
+static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id);
+static void __init kerSysInitDyingGaspHandler( void );
+static void __exit kerSysDeinitDyingGaspHandler( void );
+/* -DyingGasp function prototype - */
+
+static PNVRAM_INFO g_pNvramInfo = NULL;
+static int g_ledInitialized = 0;
+static CB_DGASP_LIST *g_cb_dgasp_list_head = NULL;
+
+static int g_wakeup_monitor = 0;
+static struct file *g_monitor_file = NULL;
+static struct task_struct *g_monitor_task = NULL;
+static unsigned int (*g_orig_fop_poll)
+ (struct file *, struct poll_table_struct *) = NULL;
+
+void kerSysMipsSoftReset(void)
+{
+ if (PERF->RevID == 0x634800A1) {
+ typedef void (*FNPTR) (void);
+ FNPTR bootaddr = (FNPTR) FLASH_BASE;
+ int i;
+
+ /* Disable interrupts. */
+ //cli();
+ spin_lock_irq(&board_lock);
+
+ /* Reset all blocks. */
+ PERF->BlockSoftReset &= ~BSR_ALL_BLOCKS;
+ for( i = 0; i < 1000000; i++ )
+ ;
+ PERF->BlockSoftReset |= BSR_ALL_BLOCKS;
+ /* Jump to the power on address. */
+ (*bootaddr) ();
+ }
+ else
+ PERF->pll_control |= SOFT_RESET; // soft reset mips
+}
+
+
+int kerSysGetMacAddress( unsigned char *pucaMacAddr, unsigned long ulId )
+{
+ int nRet = 0;
+ PMAC_ADDR_INFO pMai = NULL;
+ PMAC_ADDR_INFO pMaiFreeNoId = NULL;
+ PMAC_ADDR_INFO pMaiFreeId = NULL;
+ unsigned long i = 0, ulIdxNoId = 0, ulIdxId = 0, shiftedIdx = 0;
+
+ /* CMO -- Fix le probl<62>me avec les adresses mac que l'on n'arrive pas
+ * * <20> relire plusieurs fois */
+ /* inv_xde */
+#if 0
+ if (boot_loader_type == BOOT_CFE)
+ memcpy( pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr,
+ NVRAM_MAC_ADDRESS_LEN );
+ else {
+#endif
+ pucaMacAddr[0] = 0x00;
+ pucaMacAddr[1] = 0x07;
+ pucaMacAddr[2] = 0x3A;
+ pucaMacAddr[3] = 0xFF;
+ pucaMacAddr[4] = 0xFF;
+ pucaMacAddr[5] = 0xFF;
+#if 0
+ }
+#endif
+
+ return nRet;
+} /* kerSysGetMacAddr */
+
+int kerSysReleaseMacAddress( unsigned char *pucaMacAddr )
+{
+ int nRet = -EINVAL;
+ unsigned long ulIdx = 0;
+ int idx = (pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] -
+ g_pNvramInfo->ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET]);
+
+ // if overflow 255 (negitive), add 256 to have the correct index
+ if (idx < 0)
+ idx += 256;
+ ulIdx = (unsigned long) (idx >> SHIFT_BITS);
+
+ if( ulIdx < g_pNvramInfo->ulNumMacAddrs )
+ {
+ PMAC_ADDR_INFO pMai = &g_pNvramInfo->MacAddrs[ulIdx];
+ if( pMai->chInUse == 1 )
+ {
+ pMai->chInUse = 0;
+ nRet = 0;
+ }
+ }
+
+ return( nRet );
+} /* kerSysReleaseMacAddr */
+
+int kerSysGetSdramSize( void )
+{
+ if (boot_loader_type == BOOT_CFE) {
+ return( (int) g_pNvramInfo->ulSdramSize );
+ }
+ else {
+ printk("kerSysGetSdramSize : 0x%08X\n", (int)getMemorySize() + 0x00040000);
+ return((int)getMemorySize() + 0x00040000);
+ }
+} /* kerSysGetSdramSize */
+
+
+void kerSysLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState)
+{
+ if (g_ledInitialized)
+ boardLedCtrl(ledName, ledState);
+}
+
+unsigned int kerSysMonitorPollHook( struct file *f, struct poll_table_struct *t)
+{
+ int mask = (*g_orig_fop_poll) (f, t);
+
+ if( g_wakeup_monitor == 1 && g_monitor_file == f )
+ {
+ /* If g_wakeup_monitor is non-0, the user mode application needs to
+ * return from a blocking select function. Return POLLPRI which will
+ * cause the select to return with the exception descriptor set.
+ */
+ mask |= POLLPRI;
+ g_wakeup_monitor = 0;
+ }
+
+ return( mask );
+}
+
+/* Put the user mode application that monitors link state on a run queue. */
+void kerSysWakeupMonitorTask( void )
+{
+ g_wakeup_monitor = 1;
+ if( g_monitor_task )
+ wake_up_process( g_monitor_task );
+}
+
+//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12
+int kerSysGetResetHold(void)
+{
+ unsigned short gpio;
+
+ if( BpGetPressAndHoldResetGpio( &gpio ) == BP_SUCCESS )
+ {
+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(gpio);
+ volatile unsigned long *gpio_reg = &GPIO->GPIOio;
+
+ if( (gpio & ~BP_ACTIVE_MASK) >= 32 )
+ {
+ gpio_mask = GPIO_NUM_TO_MASK_HIGH(gpio);
+ gpio_reg = &GPIO->GPIOio_high;
+ }
+ //printk("gpio=%04x,gpio_mask=%04x,gpio_reg=%04x\n",gpio,gpio_mask,*gpio_reg);
+ if(*gpio_reg & gpio_mask) //press down
+ return RESET_BUTTON_UP;
+ }
+ return RESET_BUTTON_PRESSDOWN;
+}
+//<<JUNHON, 2004/09/15
+
+/***************************************************************************
+ * Dying gasp ISR and functions.
+ ***************************************************************************/
+#define KERSYS_DBG printk
+
+#if defined(CONFIG_BCM96345)
+#define CYCLE_PER_US 70
+#elif defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
+/* The BCM6348 cycles per microsecond is really variable since the BCM6348
+ * MIPS speed can vary depending on the PLL settings. However, an appoximate
+ * value of 120 will still work OK for the test being done.
+ */
+#define CYCLE_PER_US 120
+#endif
+#define DG_GLITCH_TO (100*CYCLE_PER_US)
+
+static void __init kerSysDyingGaspMapIntr()
+{
+ unsigned long ulIntr;
+
+#if defined(CONFIG_BCM96348) || defined(_BCM96348_) || defined(CONFIG_BCM96338) || defined(_BCM96338_)
+ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) {
+ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, INTERRUPT_ID_DG);
+ BcmHalInterruptEnable( INTERRUPT_ID_DG );
+ }
+#elif defined(CONFIG_BCM96345) || defined(_BCM96345_)
+ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) {
+ ulIntr += INTERRUPT_ID_EXTERNAL_0;
+ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, ulIntr);
+ BcmHalInterruptEnable( ulIntr );
+ }
+#endif
+
+}
+
+void kerSysSetWdTimer(ulong timeUs)
+{
+ TIMER->WatchDogDefCount = timeUs * (FPERIPH/1000000);
+ TIMER->WatchDogCtl = 0xFF00;
+ TIMER->WatchDogCtl = 0x00FF;
+}
+
+ulong kerSysGetCycleCount(void)
+{
+ ulong cnt;
+#ifdef _WIN32_WCE
+ cnt = 0;
+#else
+ __asm volatile("mfc0 %0, $9":"=d"(cnt));
+#endif
+ return(cnt);
+}
+
+static Bool kerSysDyingGaspCheckPowerLoss(void)
+{
+ ulong clk0;
+ ulong ulIntr;
+
+ ulIntr = 0;
+ clk0 = kerSysGetCycleCount();
+
+ UART->Data = 'D';
+ UART->Data = '%';
+ UART->Data = 'G';
+
+#if defined(CONFIG_BCM96345)
+ BpGetAdslDyingGaspExtIntr( &ulIntr );
+
+ do {
+ ulong clk1;
+
+ clk1 = kerSysGetCycleCount(); /* time cleared */
+ /* wait a little to get new reading */
+ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2)
+ ;
+ } while ((0 == (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT)))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO));
+
+ if (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT))) { /* power glitch */
+ BcmHalInterruptEnable( ulIntr + INTERRUPT_ID_EXTERNAL_0);
+ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US);
+ return 0;
+ }
+#elif (defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)) && !defined(VXWORKS)
+ do {
+ ulong clk1;
+
+ clk1 = kerSysGetCycleCount(); /* time cleared */
+ /* wait a little to get new reading */
+ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2)
+ ;
+ } while ((PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO));
+
+ if (!(PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET)))) {
+ BcmHalInterruptEnable( INTERRUPT_ID_DG );
+ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US);
+ return 0;
+ }
+#endif
+ return 1;
+}
+
+static void kerSysDyingGaspShutdown( void )
+{
+ kerSysSetWdTimer(1000000);
+#if defined(CONFIG_BCM96345)
+ PERF->blkEnables &= ~(EMAC_CLK_EN | USB_CLK_EN | CPU_CLK_EN);
+#elif defined(CONFIG_BCM96348)
+ PERF->blkEnables &= ~(EMAC_CLK_EN | USBS_CLK_EN | USBH_CLK_EN | SAR_CLK_EN);
+#endif
+}
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
+static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id)
+#else
+static unsigned int kerSysDyingGaspIsr(void)
+#endif
+{
+ struct list_head *pos;
+ CB_DGASP_LIST *tmp, *dsl = NULL;
+
+ if (kerSysDyingGaspCheckPowerLoss()) {
+
+ /* first to turn off everything other than dsl */
+ list_for_each(pos, &g_cb_dgasp_list_head->list) {
+ tmp = list_entry(pos, CB_DGASP_LIST, list);
+ if(strncmp(tmp->name, "dsl", 3)) {
+ (tmp->cb_dgasp_fn)(tmp->context);
+ }else {
+ dsl = tmp;
+ }
+ }
+
+ /* now send dgasp */
+ if(dsl)
+ (dsl->cb_dgasp_fn)(dsl->context);
+
+ /* reset and shutdown system */
+ kerSysDyingGaspShutdown();
+ }
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
+return( IRQ_HANDLED );
+#else
+ return( 1 );
+#endif
+}
+
+static void __init kerSysInitDyingGaspHandler( void )
+{
+ CB_DGASP_LIST *new_node;
+
+ if( g_cb_dgasp_list_head != NULL) {
+ printk("Error: kerSysInitDyingGaspHandler: list head is not null\n");
+ return;
+ }
+ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL);
+ memset(new_node, 0x00, sizeof(CB_DGASP_LIST));
+ INIT_LIST_HEAD(&new_node->list);
+ g_cb_dgasp_list_head = new_node;
+
+} /* kerSysInitDyingGaspHandler */
+
+static void __exit kerSysDeinitDyingGaspHandler( void )
+{
+ struct list_head *pos;
+ CB_DGASP_LIST *tmp;
+
+ if(g_cb_dgasp_list_head == NULL)
+ return;
+
+ list_for_each(pos, &g_cb_dgasp_list_head->list) {
+ tmp = list_entry(pos, CB_DGASP_LIST, list);
+ list_del(pos);
+ kfree(tmp);
+ }
+
+ kfree(g_cb_dgasp_list_head);
+ g_cb_dgasp_list_head = NULL;
+
+} /* kerSysDeinitDyingGaspHandler */
+
+void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context)
+{
+ CB_DGASP_LIST *new_node;
+
+ if( g_cb_dgasp_list_head == NULL) {
+ printk("Error: kerSysRegisterDyingGaspHandler: list head is null\n");
+ return;
+ }
+
+ if( devname == NULL || cbfn == NULL ) {
+ printk("Error: kerSysRegisterDyingGaspHandler: register info not enough (%s,%x,%x)\n", devname, (unsigned int)cbfn, (unsigned int)context);
+ return;
+ }
+
+ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL);
+ memset(new_node, 0x00, sizeof(CB_DGASP_LIST));
+ INIT_LIST_HEAD(&new_node->list);
+ strncpy(new_node->name, devname, IFNAMSIZ);
+ new_node->cb_dgasp_fn = (cb_dgasp_t)cbfn;
+ new_node->context = context;
+ list_add(&new_node->list, &g_cb_dgasp_list_head->list);
+
+ printk("dgasp: kerSysRegisterDyingGaspHandler: %s registered \n", devname);
+
+} /* kerSysRegisterDyingGaspHandler */
+
+void kerSysDeregisterDyingGaspHandler(char *devname)
+{
+ struct list_head *pos;
+ CB_DGASP_LIST *tmp;
+
+ if(g_cb_dgasp_list_head == NULL) {
+ printk("Error: kerSysDeregisterDyingGaspHandler: list head is null\n");
+ return;
+ }
+
+ if(devname == NULL) {
+ printk("Error: kerSysDeregisterDyingGaspHandler: devname is null\n");
+ return;
+ }
+
+ printk("kerSysDeregisterDyingGaspHandler: %s is deregistering\n", devname);
+
+ list_for_each(pos, &g_cb_dgasp_list_head->list) {
+ tmp = list_entry(pos, CB_DGASP_LIST, list);
+ if(!strcmp(tmp->name, devname)) {
+ list_del(pos);
+ kfree(tmp);
+ printk("kerSysDeregisterDyingGaspHandler: %s is deregistered\n", devname);
+ return;
+ }
+ }
+ printk("kerSysDeregisterDyingGaspHandler: %s not (de)registered\n", devname);
+
+} /* kerSysDeregisterDyingGaspHandler */
+
+//EXPORT_SYMBOL(kerSysNvRamGet);
+EXPORT_SYMBOL(kerSysGetMacAddress);
+EXPORT_SYMBOL(kerSysReleaseMacAddress);
+EXPORT_SYMBOL(kerSysGetSdramSize);
+EXPORT_SYMBOL(kerSysLedCtrl);
+EXPORT_SYMBOL(kerSysGetResetHold);
+EXPORT_SYMBOL(kerSysLedRegisterHwHandler);
+EXPORT_SYMBOL(BpGetBoardIds);
+EXPORT_SYMBOL(BpGetSdramSize);
+EXPORT_SYMBOL(BpGetPsiSize);
+EXPORT_SYMBOL(BpGetEthernetMacInfo);
+EXPORT_SYMBOL(BpGetRj11InnerOuterPairGpios);
+EXPORT_SYMBOL(BpGetPressAndHoldResetGpio);
+EXPORT_SYMBOL(BpGetVoipResetGpio);
+EXPORT_SYMBOL(BpGetVoipIntrGpio);
+EXPORT_SYMBOL(BpGetPcmciaResetGpio);
+EXPORT_SYMBOL(BpGetRtsCtsUartGpios);
+EXPORT_SYMBOL(BpGetAdslLedGpio);
+EXPORT_SYMBOL(BpGetAdslFailLedGpio);
+EXPORT_SYMBOL(BpGetWirelessLedGpio);
+EXPORT_SYMBOL(BpGetUsbLedGpio);
+EXPORT_SYMBOL(BpGetHpnaLedGpio);
+EXPORT_SYMBOL(BpGetWanDataLedGpio);
+EXPORT_SYMBOL(BpGetPppLedGpio);
+EXPORT_SYMBOL(BpGetPppFailLedGpio);
+EXPORT_SYMBOL(BpGetVoipLedGpio);
+EXPORT_SYMBOL(BpGetWirelessExtIntr);
+EXPORT_SYMBOL(BpGetAdslDyingGaspExtIntr);
+EXPORT_SYMBOL(BpGetVoipExtIntr);
+EXPORT_SYMBOL(BpGetHpnaExtIntr);
+EXPORT_SYMBOL(BpGetHpnaChipSelect);
+EXPORT_SYMBOL(BpGetVoipChipSelect);
+EXPORT_SYMBOL(BpGetWirelessSesBtnGpio);
+EXPORT_SYMBOL(BpGetWirelessSesExtIntr);
+EXPORT_SYMBOL(BpGetWirelessSesLedGpio);
+EXPORT_SYMBOL(kerSysRegisterDyingGaspHandler);
+EXPORT_SYMBOL(kerSysDeregisterDyingGaspHandler);
+EXPORT_SYMBOL(kerSysGetCycleCount);
+EXPORT_SYMBOL(kerSysSetWdTimer);
+EXPORT_SYMBOL(kerSysWakeupMonitorTask);
+
diff -urN linux-2.6.19/arch/mips/bcm963xx/boardparms.c linux-2.6.19.new/arch/mips/bcm963xx/boardparms.c
--- linux-2.6.19/arch/mips/bcm963xx/boardparms.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/boardparms.c 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,2391 @@
+/*
+<:copyright-gpl
+
+ Copyright 2003 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+
+:>
+*/
+/**************************************************************************
+ * File Name : boardparms.c
+ *
+ * Description: This file contains the implementation for the BCM63xx board
+ * parameter access functions.
+ *
+ * Updates : 07/14/2003 Created.
+ ***************************************************************************/
+
+/* Includes. */
+#include "boardparms.h"
+
+/* Defines. */
+
+/* Default psi size in K bytes */
+#define BP_PSI_DEFAULT_SIZE 24
+
+/* Typedefs */
+typedef struct boardparameters
+{
+ char szBoardId[BP_BOARD_ID_LEN]; /* board id string */
+ ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS];
+ VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP];
+ unsigned short usSdramSize; /* SDRAM size and type */
+ unsigned short usPsiSize; /* persistent storage in K bytes */
+ unsigned short usGpioRj11InnerPair; /* GPIO pin or not defined */
+ unsigned short usGpioRj11OuterPair; /* GPIO pin or not defined */
+ unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */
+ unsigned short usGpioPcmciaReset; /* GPIO pin or not defined */
+ unsigned short usGpioUartRts; /* GPIO pin or not defined */
+ unsigned short usGpioUartCts; /* GPIO pin or not defined */
+ unsigned short usGpioLedAdsl; /* GPIO pin or not defined */
+ unsigned short usGpioLedAdslFail; /* GPIO pin or not defined */
+ unsigned short usGpioLedWireless; /* GPIO pin or not defined */
+ unsigned short usGpioLedUsb; /* GPIO pin or not defined */
+ unsigned short usGpioLedHpna; /* GPIO pin or not defined */
+ unsigned short usGpioLedWanData; /* GPIO pin or not defined */
+ unsigned short usGpioLedPpp; /* GPIO pin or not defined */
+ unsigned short usGpioLedPppFail; /* GPIO pin or not defined */
+ unsigned short usGpioLedBlPowerOn; /* GPIO pin or not defined */
+ unsigned short usGpioLedBlAlarm; /* GPIO pin or not defined */
+ unsigned short usGpioLedBlResetCfg; /* GPIO pin or not defined */
+ unsigned short usGpioLedBlStop; /* GPIO pin or not defined */
+ unsigned short usExtIntrWireless; /* ext intr or not defined */
+ unsigned short usExtIntrAdslDyingGasp; /* ext intr or not defined */
+ unsigned short usExtIntrHpna; /* ext intr or not defined */
+ unsigned short usCsHpna; /* chip select not defined */
+ unsigned short usAntInUseWireless; /* antenna in use or not defined */
+ unsigned short usGpioSesBtnWireless; /* GPIO pin or not defined */
+ unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */
+ unsigned short usGpioLedSesWireless; /* GPIO pin or not defined */
+} BOARD_PARAMETERS, *PBOARD_PARAMETERS;
+
+/* Variables */
+#if defined(_BCM96338_) || defined(CONFIG_BCM96338)
+static BOARD_PARAMETERS g_bcm96338sv =
+{
+ "96338SV", /* szBoardId */
+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
+ 0x01, /* ucPhyAddress */
+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
+ BP_NOT_DEFINED, /* usGpioPhyReset */
+ 0x01, /* numSwitchPorts */
+ BP_ENET_CONFIG_MDIO, /* usConfigType */
+ BP_NOT_DEFINED}, /* usReverseMii */
+ {BP_ENET_NO_PHY}}, /* ucPhyType */
+ {{BP_VOIP_NO_DSP}, /* ucDspType */
+ {BP_VOIP_NO_DSP}}, /* ucDspType */
+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
+ BP_NOT_DEFINED, /* usGpioUartRts */
+ BP_NOT_DEFINED, /* usGpioUartCts */
+ BP_NOT_DEFINED, /* usGpioLedAdsl */
+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
+ BP_NOT_DEFINED, /* usGpioLedWireless */
+ BP_NOT_DEFINED, /* usGpioLedUsb */
+ BP_NOT_DEFINED, /* usGpioLedHpna */
+ BP_NOT_DEFINED, /* usGpioLedWanData */
+ BP_NOT_DEFINED, /* usGpioLedPpp */
+ BP_NOT_DEFINED, /* usGpioLedPppFail */
+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
+ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */
+ BP_NOT_DEFINED, /* usGpioLedBlStop */
+ BP_NOT_DEFINED, /* usExtIntrWireless */
+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
+ BP_NOT_DEFINED, /* usExtIntrHpna */
+ BP_NOT_DEFINED, /* usCsHpna */
+ BP_NOT_DEFINED, /* usAntInUseWireless */
+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
+ BP_NOT_DEFINED /* usGpioLedSesWireless */
+};
+static BOARD_PARAMETERS g_bcm96338l2m8m =
+{
+ "96338L-2M-8M", /* szBoardId */
+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
+ 0x01, /* ucPhyAddress */
+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
+ BP_NOT_DEFINED, /* usGpioPhyReset */
+ 0x01, /* numSwitchPorts */
+ BP_ENET_CONFIG_MDIO, /* usConfigType */
+ BP_NOT_DEFINED}, /* usReverseMii */
+ {BP_ENET_NO_PHY}}, /* ucPhyType */
+ {{BP_VOIP_NO_DSP}, /* ucDspType */
+ {BP_VOIP_NO_DSP}}, /* ucDspType */
+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
+ BP_NOT_DEFINED, /* usGpioUartRts */
+ BP_NOT_DEFINED, /* usGpioUartCts */
+ BP_NOT_DEFINED, /* usGpioLedAdsl */
+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
+ BP_NOT_DEFINED, /* usGpioLedWireless */
+ BP_NOT_DEFINED, /* usGpioLedUsb */
+ BP_NOT_DEFINED, /* usGpioLedHpna */
+ BP_GPIO_3_AL, /* usGpioLedWanData */
+ BP_GPIO_3_AL, /* usGpioLedPpp */
+ BP_GPIO_4_AL, /* usGpioLedPppFail */
+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
+ BP_GPIO_1_AL, /* usGpioLedBlStop */
+ BP_NOT_DEFINED, /* usExtIntrWireless */
+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
+ BP_NOT_DEFINED, /* usExtIntrHpna */
+ BP_NOT_DEFINED, /* usCsHpna */
+ BP_NOT_DEFINED, /* usAntInUseWireless */
+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
+ BP_NOT_DEFINED /* usGpioLedSesWireless */
+};
+static PBOARD_PARAMETERS g_BoardParms[] =
+ {&g_bcm96338sv, &g_bcm96338l2m8m, 0};
+#endif
+
+#if defined(_BCM96345_) || defined(CONFIG_BCM96345)
+static BOARD_PARAMETERS g_bcm96345r =
+{
+ "96345R", /* szBoardId */
+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
+ 0x01, /* ucPhyAddress */
+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
+ BP_NOT_DEFINED, /* usGpioPhyReset */
+ 0x01, /* numSwitchPorts */
+ BP_ENET_CONFIG_MDIO, /* usConfigType */
+ BP_NOT_DEFINED}, /* usReverseMii */
+ {BP_ENET_NO_PHY}}, /* ucPhyType */
+ {{BP_VOIP_NO_DSP}, /* ucDspType */
+ {BP_VOIP_NO_DSP}}, /* ucDspType */
+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
+ BP_GPIO_12_AH, /* usGpioRj11OuterPair */
+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
+ BP_NOT_DEFINED, /* usGpioUartRts */
+ BP_NOT_DEFINED, /* usGpioUartCts */
+ BP_GPIO_8_AH, /* usGpioLedAdsl */
+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
+ BP_NOT_DEFINED, /* usGpioLedWireless */
+ BP_NOT_DEFINED, /* usGpioLedUsb */
+ BP_NOT_DEFINED, /* usGpioLedHpna */
+ BP_GPIO_8_AH, /* usGpioLedWanData */
+ BP_GPIO_9_AH, /* usGpioLedPpp */
+ BP_NOT_DEFINED, /* usGpioLedPppFail */
+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
+ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */
+ BP_GPIO_8_AH, /* usGpioLedBlStop */
+ BP_NOT_DEFINED, /* usExtIntrWireless */
+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
+ BP_NOT_DEFINED, /* usExtIntrHpna */
+ BP_NOT_DEFINED, /* usCsHpna */
+ BP_NOT_DEFINED, /* usAntInUseWireless */
+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
+ BP_NOT_DEFINED /* usGpioLedSesWireless */
+};
+
+static BOARD_PARAMETERS g_bcm96345gw2 =
+{
+ /* A hardware jumper determines whether GPIO 13 is used for Press and Hold
+ * Reset or RTS.
+ */
+ "96345GW2", /* szBoardId */
+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
+ 0x00, /* ucPhyAddress */
+ BP_GPIO_0_AH, /* usGpioPhySpiSck */
+ BP_GPIO_4_AH, /* usGpioPhySpiSs */
+ BP_GPIO_12_AH, /* usGpioPhySpiMosi */
+ BP_GPIO_11_AH, /* usGpioPhySpiMiso */
+ BP_NOT_DEFINED, /* usGpioPhyReset */
+ 0x04, /* numSwitchPorts */
+ BP_ENET_CONFIG_GPIO, /* usConfigType */
+ BP_ENET_REVERSE_MII}, /* usReverseMii */
+ {BP_ENET_NO_PHY}}, /* ucPhyType */
+ {{BP_VOIP_DSP, /* ucDspType */
+ 0x00, /* ucDspAddress */
+ BP_EXT_INTR_1, /* usExtIntrVoip */
+ BP_GPIO_6_AH, /* usGpioVoipReset */
+ BP_GPIO_15_AH, /* usGpioVoipIntr */
+ BP_NOT_DEFINED, /* usGpioLedVoip */
+ BP_CS_2}, /* usCsVoip */
+ {BP_VOIP_NO_DSP}}, /* ucDspType */
+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
+ BP_GPIO_2_AH, /* usGpioPcmciaReset */
+ BP_GPIO_13_AH, /* usGpioUartRts */
+ BP_GPIO_9_AH, /* usGpioUartCts */
+ BP_GPIO_8_AH, /* usGpioLedAdsl */
+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
+ BP_NOT_DEFINED, /* usGpioLedWireless */
+ BP_GPIO_7_AH, /* usGpioLedUsb */
+ BP_NOT_DEFINED, /* usGpioLedHpna */
+ BP_GPIO_8_AH, /* usGpioLedWanData */
+ BP_NOT_DEFINED, /* usGpioLedPpp */
+ BP_NOT_DEFINED, /* usGpioLedPppFail */
+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
+ BP_GPIO_7_AH, /* usGpioLedBlResetCfg */
+ BP_GPIO_8_AH, /* usGpioLedBlStop */
+ BP_EXT_INTR_2, /* usExtIntrWireless */
+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
+ BP_NOT_DEFINED, /* usExtIntrHpna */
+ BP_NOT_DEFINED, /* usCsHpna */
+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
+ BP_NOT_DEFINED /* usGpioLedSesWireless */
+};
+
+static BOARD_PARAMETERS g_bcm96345gw =
+{
+ "96345GW", /* szBoardId */
+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
+ 0x00, /* ucPhyAddress */
+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
+ BP_NOT_DEFINED, /* usGpioPhyReset */
+ 0x04, /* numSwitchPorts */
+ BP_ENET_CONFIG_MDIO, /* usConfigType */
+ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */
+ {BP_ENET_NO_PHY}}, /* ucPhyType */
+ {{BP_VOIP_DSP, /* ucDspType */
+ 0x00, /* ucDspAddress */
+ BP_EXT_INTR_1, /* usExtIntrVoip */
+ BP_GPIO_6_AH, /* usGpioVoipReset */
+ BP_GPIO_15_AH, /* usGpioVoipIntr */
+ BP_NOT_DEFINED, /* usGpioLedVoip */
+ BP_CS_2}, /* usCsVoip */
+ {BP_VOIP_NO_DSP}}, /* ucDspType */
+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */
+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
+ BP_GPIO_1_AH, /* usGpioRj11OuterPair */
+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
+ BP_GPIO_2_AH, /* usGpioPcmciaReset */
+ BP_NOT_DEFINED, /* usGpioUartRts */
+ BP_NOT_DEFINED, /* usGpioUartCts */
+ BP_GPIO_8_AH, /* usGpioLedAdsl */
+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
+ BP_GPIO_10_AH, /* usGpioLedWireless */
+ BP_GPIO_7_AH, /* usGpioLedUsb */
+ BP_NOT_DEFINED, /* usGpioLedHpna */
+ BP_GPIO_8_AH, /* usGpioLedWanData */
+ BP_NOT_DEFINED, /* usGpioLedPpp */
+ BP_NOT_DEFINED, /* usGpioLedPppFail */
+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
+ BP_GPIO_9_AH, /* usGpioLedBlAlarm */
+ BP_GPIO_10_AH, /* usGpioLedBlResetCfg */
+ BP_GPIO_8_AH, /* usGpioLedBlStop */
+ BP_EXT_INTR_2, /* usExtIntrWireless */
+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
+ BP_EXT_INTR_3, /* usExtIntrHpna */
+ BP_CS_1, /* usCsHpna */
+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
+ BP_NOT_DEFINED /* usGpioLedSesWireless */
+};
+
+static BOARD_PARAMETERS g_bcm96335r =
+{
+ "96335R", /* szBoardId */
+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
+ 0x01, /* ucPhyAddress */
+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
+ BP_NOT_DEFINED, /* usGpioPhyReset */
+ 0x01, /* numSwitchPorts */
+ BP_ENET_CONFIG_MDIO, /* usConfigType */
+ BP_NOT_DEFINED}, /* usReverseMii */
+ {BP_ENET_NO_PHY}}, /* ucPhyType */
+ {{BP_VOIP_NO_DSP}, /* ucDspType */
+ {BP_VOIP_NO_DSP}}, /* ucDspType */
+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
+ BP_GPIO_14_AH, /* usGpioPressAndHoldReset */
+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
+ BP_NOT_DEFINED, /* usGpioUartRts */
+ BP_NOT_DEFINED, /* usGpioUartCts */
+ BP_GPIO_9_AH, /* usGpioLedAdsl */
+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
+ BP_NOT_DEFINED, /* usGpioLedWireless */
+ BP_NOT_DEFINED, /* usGpioLedUsb */
+ BP_NOT_DEFINED, /* usGpioLedHpna */
+ BP_GPIO_9_AH, /* usGpioLedWanData */
+ BP_GPIO_8_AH, /* usGpioLedPpp */
+ BP_NOT_DEFINED, /* usGpioLedPppFail */
+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
+ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */
+ BP_GPIO_9_AH, /* usGpioLedBlStop */
+ BP_NOT_DEFINED, /* usExtIntrWireless */
+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
+ BP_NOT_DEFINED, /* usExtIntrHpna */
+ BP_NOT_DEFINED, /* usCsHpna */
+ BP_NOT_DEFINED, /* usAntInUseWireless */
+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
+ BP_NOT_DEFINED /* usGpioLedSesWireless */
+};
+
+static BOARD_PARAMETERS g_bcm96345r0 =
+{
+ "96345R0", /* szBoardId */
+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
+ 0x01, /* ucPhyAddress */
+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
+ BP_NOT_DEFINED, /* usGpioPhyReset */
+ 0x01, /* numSwitchPorts */
+ BP_ENET_CONFIG_MDIO, /* usConfigType */
+ BP_NOT_DEFINED}, /* usReverseMii */
+ {BP_ENET_NO_PHY}}, /* ucPhyType */
+ {{BP_VOIP_NO_DSP}, /* ucDspType */
+ {BP_VOIP_NO_DSP}}, /* ucDspType */
+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
+ BP_NOT_DEFINED, /* usGpioUartRts */
+ BP_NOT_DEFINED, /* usGpioUartCts */
+ BP_GPIO_8_AH, /* usGpioLedAdsl */
+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
+ BP_NOT_DEFINED, /* usGpioLedWireless */
+ BP_NOT_DEFINED, /* usGpioLedUsb */
+ BP_NOT_DEFINED, /* usGpioLedHpna */
+ BP_GPIO_9_AH, /* usGpioLedWanData */
+ BP_GPIO_9_AH, /* usGpioLedPpp */
+ BP_NOT_DEFINED, /* usGpioLedPppFail */
+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
+ BP_GPIO_9_AH, /* usGpioLedBlAlarm */
+ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */
+ BP_GPIO_8_AH, /* usGpioLedBlStop */
+ BP_NOT_DEFINED, /* usExtIntrWireless */
+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
+ BP_NOT_DEFINED, /* usExtIntrHpna */
+ BP_NOT_DEFINED, /* usCsHpna */
+ BP_NOT_DEFINED, /* usAntInUseWireless */
+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
+ BP_NOT_DEFINED /* usGpioLedSesWireless */
+};
+
+static BOARD_PARAMETERS g_bcm96345rs =
+{
+ "96345RS", /* szBoardId */
+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
+ 0x00, /* ucPhyAddress */
+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
+ BP_NOT_DEFINED, /* usGpioPhyReset */
+ 0x01, /* numSwitchPorts */
+ BP_ENET_CONFIG_MDIO, /* usConfigType */
+ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */
+ {BP_ENET_NO_PHY}}, /* ucPhyType */
+ {{BP_VOIP_NO_DSP}, /* ucDspType */
+ {BP_VOIP_NO_DSP}}, /* ucDspType */
+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */
+ BP_GPIO_12_AH, /* usGpioRj11OuterPair */
+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */
+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
+ BP_NOT_DEFINED, /* usGpioUartRts */
+ BP_NOT_DEFINED, /* usGpioUartCts */
+ BP_GPIO_8_AH, /* usGpioLedAdsl */
+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
+ BP_NOT_DEFINED, /* usGpioLedWireless */
+ BP_NOT_DEFINED, /* usGpioLedUsb */
+ BP_NOT_DEFINED, /* usGpioLedHpna */
+ BP_GPIO_8_AH, /* usGpioLedWanData */
+ BP_GPIO_9_AH, /* usGpioLedPpp */
+ BP_NOT_DEFINED, /* usGpioLedPppFail */
+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */
+ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */
+ BP_GPIO_8_AH, /* usGpioLedBlStop */
+ BP_NOT_DEFINED, /* usExtIntrWireless */
+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */
+ BP_NOT_DEFINED, /* usExtIntrHpna */
+ BP_NOT_DEFINED, /* usCsHpna */
+ BP_NOT_DEFINED, /* usAntInUseWireless */
+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
+ BP_NOT_DEFINED /* usGpioLedSesWireless */
+};
+
+static PBOARD_PARAMETERS g_BoardParms[] =
+ {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0,
+ &g_bcm96345rs, 0};
+#endif
+
+#if defined(_BCM96348_) || defined(CONFIG_BCM96348)
+
+static BOARD_PARAMETERS g_bcm96348r =
+{
+ "96348R", /* szBoardId */
+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
+ 0x01, /* ucPhyAddress */
+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
+ BP_NOT_DEFINED, /* usGpioPhyReset */
+ 0x01, /* numSwitchPorts */
+ BP_ENET_CONFIG_MDIO, /* usConfigType */
+ BP_NOT_DEFINED}, /* usReverseMii */
+ {BP_ENET_NO_PHY}}, /* ucPhyType */
+ {{BP_VOIP_NO_DSP}, /* ucDspType */
+ {BP_VOIP_NO_DSP}}, /* ucDspType */
+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */
+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
+ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */
+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
+ BP_NOT_DEFINED, /* usGpioUartRts */
+ BP_NOT_DEFINED, /* usGpioUartCts */
+ BP_NOT_DEFINED, /* usGpioLedAdsl */
+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
+ BP_NOT_DEFINED, /* usGpioLedWireless */
+ BP_NOT_DEFINED, /* usGpioLedUsb */
+ BP_NOT_DEFINED, /* usGpioLedHpna */
+ BP_GPIO_3_AL, /* usGpioLedWanData */
+ BP_GPIO_3_AL, /* usGpioLedPpp */
+ BP_GPIO_4_AL, /* usGpioLedPppFail */
+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
+ BP_GPIO_1_AL, /* usGpioLedBlStop */
+ BP_NOT_DEFINED, /* usExtIntrWireless */
+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
+ BP_NOT_DEFINED, /* usExtIntrHpna */
+ BP_NOT_DEFINED, /* usCsHpna */
+ BP_NOT_DEFINED, /* usAntInUseWireless */
+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
+ BP_NOT_DEFINED /* usGpioLedSesWireless */
+};
+
+static BOARD_PARAMETERS g_bcm96348lv =
+{
+ "96348LV", /* szBoardId */
+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
+ 0x01, /* ucPhyAddress */
+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
+ BP_NOT_DEFINED, /* usGpioPhyReset */
+ 0x01, /* numSwitchPorts */
+ BP_ENET_CONFIG_MDIO, /* usConfigType */
+ BP_NOT_DEFINED}, /* usReverseMii */
+ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */
+ 0x02, /* ucPhyAddress */
+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
+ BP_GPIO_5_AL, /* usGpioPhyReset */
+ 0x01, /* numSwitchPorts */
+ BP_ENET_CONFIG_MDIO, /* usConfigType */
+ BP_NOT_DEFINED}}, /* usReverseMii */
+ {{BP_VOIP_NO_DSP}, /* ucDspType */
+ {BP_VOIP_NO_DSP}}, /* ucDspType */
+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
+ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */
+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
+ BP_NOT_DEFINED, /* usGpioUartRts */
+ BP_NOT_DEFINED, /* usGpioUartCts */
+ BP_NOT_DEFINED, /* usGpioLedAdsl */
+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
+ BP_NOT_DEFINED, /* usGpioLedWireless */
+ BP_NOT_DEFINED, /* usGpioLedUsb */
+ BP_NOT_DEFINED, /* usGpioLedHpna */
+ BP_GPIO_3_AL, /* usGpioLedWanData */
+ BP_GPIO_3_AL, /* usGpioLedPpp */
+ BP_GPIO_4_AL, /* usGpioLedPppFail */
+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
+ BP_GPIO_1_AL, /* usGpioLedBlStop */
+ BP_NOT_DEFINED, /* usExtIntrWireless */
+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
+ BP_NOT_DEFINED, /* usExtIntrHpna */
+ BP_NOT_DEFINED, /* usCsHpna */
+ BP_NOT_DEFINED, /* usAntInUseWireless */
+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
+ BP_NOT_DEFINED /* usGpioLedSesWireless */
+};
+
+static BOARD_PARAMETERS g_bcm96348gw =
+{
+ "96348GW", /* szBoardId */
+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
+ 0x01, /* ucPhyAddress */
+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
+ BP_NOT_DEFINED, /* usGpioPhyReset */
+ 0x01, /* numSwitchPorts */
+ BP_ENET_CONFIG_MDIO, /* usConfigType */
+ BP_NOT_DEFINED}, /* usReverseMii */
+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
+ 0x00, /* ucPhyAddress */
+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
+ BP_NOT_DEFINED, /* usGpioPhyReset */
+ 0x03, /* numSwitchPorts */
+ BP_ENET_CONFIG_SPI_SSB_0, /* usConfigType */
+ BP_ENET_REVERSE_MII}}, /* usReverseMii */
+ {{BP_VOIP_DSP, /* ucDspType */
+ 0x00, /* ucDspAddress */
+ BP_EXT_INTR_2, /* usExtIntrVoip */
+ BP_GPIO_6_AH, /* usGpioVoipReset */
+ BP_GPIO_34_AH, /* usGpioVoipIntr */
+ BP_NOT_DEFINED, /* usGpioLedVoip */
+ BP_CS_2}, /* usCsVoip */
+ {BP_VOIP_NO_DSP}}, /* ucDspType */
+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
+ BP_NOT_DEFINED, /* usGpioUartRts */
+ BP_NOT_DEFINED, /* usGpioUartCts */
+ BP_NOT_DEFINED, /* usGpioLedAdsl */
+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
+ BP_NOT_DEFINED, /* usGpioLedWireless */
+ BP_NOT_DEFINED, /* usGpioLedUsb */
+ BP_NOT_DEFINED, /* usGpioLedHpna */
+ BP_GPIO_3_AL, /* usGpioLedWanData */
+ BP_GPIO_3_AL, /* usGpioLedPpp */
+ BP_GPIO_4_AL, /* usGpioLedPppFail */
+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
+ BP_GPIO_1_AL, /* usGpioLedBlStop */
+ BP_NOT_DEFINED, /* usExtIntrWireless */
+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
+ BP_NOT_DEFINED, /* usExtIntrHpna */
+ BP_NOT_DEFINED, /* usCsHpna */
+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
+ BP_NOT_DEFINED, /* BP_GPIO_35_AH, */ /* usGpioSesBtnWireless */
+ BP_NOT_DEFINED, /* BP_EXT_INTR_3, */ /* usExtIntrSesBtnWireless */
+ BP_NOT_DEFINED /* BP_GPIO_0_AL */ /* usGpioLedSesWireless */
+};
+
+
+static BOARD_PARAMETERS g_bcm96348gw_10 =
+{
+ "96348GW-10", /* szBoardId */
+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
+ 0x01, /* ucPhyAddress */
+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
+ BP_NOT_DEFINED, /* usGpioPhyReset */
+ 0x01, /* numSwitchPorts */
+ BP_ENET_CONFIG_MDIO, /* usConfigType */
+ BP_NOT_DEFINED}, /* usReverseMii */
+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
+ 0x00, /* ucPhyAddress */
+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
+ BP_NOT_DEFINED, /* usGpioPhyReset */
+ 0x03, /* numSwitchPorts */
+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
+ BP_ENET_REVERSE_MII}}, /* usReverseMii */
+ {{BP_VOIP_DSP, /* ucDspType */
+ 0x00, /* ucDspAddress */
+ BP_EXT_INTR_2, /* usExtIntrVoip */
+ BP_GPIO_6_AH, /* usGpioVoipReset */
+ BP_GPIO_34_AH, /* usGpioVoipIntr */
+ BP_NOT_DEFINED, /* usGpioLedVoip */
+ BP_CS_2}, /* usCsVoip */
+ {BP_VOIP_NO_DSP}}, /* ucDspType */
+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
+ BP_NOT_DEFINED, /* usGpioUartRts */
+ BP_NOT_DEFINED, /* usGpioUartCts */
+ BP_NOT_DEFINED, /* usGpioLedAdsl */
+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
+ BP_NOT_DEFINED, /* usGpioLedWireless */
+ BP_NOT_DEFINED, /* usGpioLedUsb */
+ BP_NOT_DEFINED, /* usGpioLedHpna */
+ BP_GPIO_3_AL, /* usGpioLedWanData */
+ BP_GPIO_3_AL, /* usGpioLedPpp */
+ BP_GPIO_4_AL, /* usGpioLedPppFail */
+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
+ BP_GPIO_1_AL, /* usGpioLedBlStop */
+ BP_NOT_DEFINED, /* usExtIntrWireless */
+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
+ BP_NOT_DEFINED, /* usExtIntrHpna */
+ BP_NOT_DEFINED, /* usCsHpna */
+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
+ BP_NOT_DEFINED /* usGpioLedSesWireless */
+};
+
+static BOARD_PARAMETERS g_bcm96348gw_11 =
+{
+ "96348GW-11", /* szBoardId */
+ {{BP_ENET_NO_PHY}, /* ucPhyType */
+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
+ 0x00, /* ucPhyAddress */
+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
+ BP_NOT_DEFINED, /* usGpioPhyReset */
+ 0x04, /* numSwitchPorts */
+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
+ BP_ENET_REVERSE_MII}}, /* usReverseMii */
+ {{BP_VOIP_NO_DSP}, /* ucDspType */
+ {BP_VOIP_NO_DSP}}, /* ucDspType */
+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
+ BP_NOT_DEFINED, /* usGpioUartRts */
+ BP_NOT_DEFINED, /* usGpioUartCts */
+ BP_NOT_DEFINED, /* usGpioLedAdsl */
+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
+ BP_NOT_DEFINED, /* usGpioLedWireless */
+ BP_NOT_DEFINED, /* usGpioLedUsb */
+ BP_NOT_DEFINED, /* usGpioLedHpna */
+ BP_GPIO_3_AL, /* usGpioLedWanData */
+ BP_GPIO_3_AL, /* usGpioLedPpp */
+ BP_GPIO_4_AL, /* usGpioLedPppFail */
+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
+ BP_GPIO_1_AL, /* usGpioLedBlStop */
+ BP_NOT_DEFINED, /* usExtIntrWireless */
+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
+ BP_NOT_DEFINED, /* usExtIntrHpna */
+ BP_NOT_DEFINED, /* usCsHpna */
+ BP_NOT_DEFINED, /* usAntInUseWireless */
+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
+ BP_NOT_DEFINED /* usGpioLedSesWireless */
+};
+
+static BOARD_PARAMETERS g_bcm96348sv =
+{
+ "96348SV", /* szBoardId */
+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
+ 0x01, /* ucPhyAddress */
+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
+ BP_NOT_DEFINED, /* usGpioPhyReset */
+ 0x01, /* numSwitchPorts */
+ BP_ENET_CONFIG_MDIO, /* usConfigType */
+ BP_NOT_DEFINED}, /* usReverseMii */
+ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */
+ 0x1f, /* ucPhyAddress */
+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
+ BP_NOT_DEFINED, /* usGpioPhyReset */
+ 0x01, /* numSwitchPorts */
+ BP_ENET_CONFIG_MDIO, /* usConfigType */
+ BP_NOT_DEFINED}}, /* usReverseMii */
+ {{BP_VOIP_NO_DSP}, /* ucDspType */
+ {BP_VOIP_NO_DSP}}, /* ucDspType */
+ BP_MEMORY_32MB_2_CHIP, /* usSdramSize */
+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */
+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
+ BP_NOT_DEFINED, /* usGpioUartRts */
+ BP_NOT_DEFINED, /* usGpioUartCts */
+ BP_NOT_DEFINED, /* usGpioLedAdsl */
+ BP_NOT_DEFINED, /* usGpioLedAdslFail */
+ BP_NOT_DEFINED, /* usGpioLedWireless */
+ BP_NOT_DEFINED, /* usGpioLedUsb */
+ BP_NOT_DEFINED, /* usGpioLedHpna */
+ BP_NOT_DEFINED, /* usGpioLedWanData */
+ BP_NOT_DEFINED, /* usGpioLedPpp */
+ BP_NOT_DEFINED, /* usGpioLedPppFail */
+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */
+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
+ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */
+ BP_NOT_DEFINED, /* usGpioLedBlStop */
+ BP_NOT_DEFINED, /* usExtIntrWireless */
+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
+ BP_NOT_DEFINED, /* usExtIntrHpna */
+ BP_NOT_DEFINED, /* usCsHpna */
+ BP_NOT_DEFINED, /* usAntInUseWireless */
+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
+ BP_NOT_DEFINED /* usGpioLedSesWireless */
+};
+
+
+static BOARD_PARAMETERS g_bcm96348gw_dualDsp =
+{
+ "96348GW-DualDSP", /* szBoardId */
+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
+ 0x01, /* ucPhyAddress */
+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
+ BP_NOT_DEFINED, /* usGpioPhyReset */
+ 0x01, /* numSwitchPorts */
+ BP_ENET_CONFIG_MDIO, /* usConfigType */
+ BP_NOT_DEFINED}, /* usReverseMii */
+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */
+ 0x00, /* ucPhyAddress */
+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
+ BP_NOT_DEFINED, /* usGpioPhyReset */
+ 0x03, /* numSwitchPorts */
+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
+ BP_ENET_REVERSE_MII}}, /* usReverseMii */
+ {{BP_VOIP_DSP, /* ucDspType */
+ 0x00, /* ucDspAddress */
+ BP_EXT_INTR_2, /* usExtIntrVoip */
+ BP_UNEQUIPPED, /* usGpioVoipReset */
+ BP_GPIO_34_AH, /* usGpioVoipIntr */
+ BP_NOT_DEFINED, /* usGpioLedVoip */
+ BP_CS_2}, /* usCsVoip */
+ {BP_VOIP_DSP, /* ucDspType */
+ 0x01, /* ucDspAddress */
+ BP_EXT_INTR_3, /* usExtIntrVoip */
+ BP_UNEQUIPPED , /* usGpioVoipReset */
+ BP_GPIO_35_AH, /* usGpioVoipIntr */
+ BP_NOT_DEFINED, /* usGpioLedVoip */
+ BP_CS_3}}, /* usCsVoip */
+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
+ BP_NOT_DEFINED, /* usGpioUartRts */
+ BP_NOT_DEFINED, /* usGpioUartCts */
+ BP_NOT_DEFINED, /* usGpioLedAdsl */
+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
+ BP_NOT_DEFINED, /* usGpioLedWireless */
+ BP_NOT_DEFINED, /* usGpioLedUsb */
+ BP_NOT_DEFINED, /* usGpioLedHpna */
+ BP_GPIO_3_AL, /* usGpioLedWanData */
+ BP_GPIO_3_AL, /* usGpioLedPpp */
+ BP_GPIO_4_AL, /* usGpioLedPppFail */
+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
+ BP_GPIO_1_AL, /* usGpioLedBlStop */
+ BP_NOT_DEFINED, /* usExtIntrWireless */
+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */
+ BP_NOT_DEFINED, /* usExtIntrHpna */
+ BP_NOT_DEFINED, /* usCsHpna */
+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */
+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
+ BP_NOT_DEFINED /* usGpioLedSesWireless */
+};
+
+
+static BOARD_PARAMETERS g_bcmCustom_01 =
+{
+ "BCMCUST_01", /* szBoardId */
+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */
+ 0x01, /* ucPhyAddress */
+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
+ BP_NOT_DEFINED, /* usGpioPhyReset */
+ 0x01, /* numSwitchPorts */
+ BP_ENET_CONFIG_MDIO, /* usConfigType */
+ BP_NOT_DEFINED}, /* usReverseMii */
+ {BP_ENET_NO_PHY, /* ucPhyType */
+ 0x00, /* ucPhyAddress */
+ BP_NOT_DEFINED, /* usGpioPhySpiSck */
+ BP_NOT_DEFINED, /* usGpioPhySpiSs */
+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */
+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */
+ BP_NOT_DEFINED, /* usGpioPhyReset */
+ 0x01, /* numSwitchPorts */
+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */
+ BP_ENET_REVERSE_MII}}, /* usReverseMii */
+ {{BP_VOIP_DSP, /* ucDspType */
+ 0x00, /* ucDspAddress */
+ BP_EXT_INTR_2, /* usExtIntrVoip */
+ BP_GPIO_36_AH, /* usGpioVoipReset */
+ BP_GPIO_34_AL, /* usGpioVoipIntr */
+ BP_NOT_DEFINED, /* usGpioLedVoip */
+ BP_CS_2}, /* usCsVoip */
+ {BP_VOIP_NO_DSP}}, /* ucDspType */
+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */
+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */
+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */
+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */
+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */
+ BP_NOT_DEFINED, /* usGpioPcmciaReset */
+ BP_NOT_DEFINED, /* usGpioUartRts */
+ BP_NOT_DEFINED, /* usGpioUartCts */
+ BP_NOT_DEFINED, /* usGpioLedAdsl */
+ BP_GPIO_2_AL, /* usGpioLedAdslFail */
+ BP_NOT_DEFINED, /* usGpioLedWireless */
+ BP_NOT_DEFINED, /* usGpioLedUsb */
+ BP_NOT_DEFINED, /* usGpioLedHpna */
+ BP_GPIO_3_AL, /* usGpioLedWanData */
+ BP_GPIO_3_AL, /* usGpioLedPpp */
+ BP_GPIO_4_AL, /* usGpioLedPppFail */
+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */
+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */
+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */
+ BP_GPIO_1_AL, /* usGpioLedBlStop */
+ BP_NOT_DEFINED, /* usExtIntrWireless */
+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */
+ BP_NOT_DEFINED, /* usExtIntrHpna */
+ BP_NOT_DEFINED, /* usCsHpna */
+ BP_NOT_DEFINED, /* usAntInUseWireless */
+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */
+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */
+ BP_NOT_DEFINED /* usGpioLedSesWireless */
+};
+
+static PBOARD_PARAMETERS g_BoardParms[] =
+ {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10,
+ &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp,
+ &g_bcmCustom_01, 0};
+#endif
+
+static PBOARD_PARAMETERS g_pCurrentBp = 0;
+
+/**************************************************************************
+ * Name : bpstrcmp
+ *
+ * Description: String compare for this file so it does not depend on an OS.
+ * (Linux kernel and CFE share this source file.)
+ *
+ * Parameters : [IN] dest - destination string
+ * [IN] src - source string
+ *
+ * Returns : -1 - dest < src, 1 - dest > src, 0 dest == src
+ ***************************************************************************/
+static int bpstrcmp(const char *dest,const char *src);
+static int bpstrcmp(const char *dest,const char *src)
+{
+ while (*src && *dest)
+ {
+ if (*dest < *src) return -1;
+ if (*dest > *src) return 1;
+ dest++;
+ src++;
+ }
+
+ if (*dest && !*src) return 1;
+ if (!*dest && *src) return -1;
+ return 0;
+} /* bpstrcmp */
+
+/**************************************************************************
+ * Name : BpGetVoipDspConfig
+ *
+ * Description: Gets the DSP configuration from the board parameter
+ * structure for a given DSP index.
+ *
+ * Parameters : [IN] dspNum - DSP index (number)
+ *
+ * Returns : Pointer to DSP configuration block if found/valid, NULL
+ * otherwise.
+ ***************************************************************************/
+VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum );
+VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum )
+{
+ VOIP_DSP_INFO *pDspConfig = 0;
+ int i;
+
+ if( g_pCurrentBp )
+ {
+ for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ )
+ {
+ if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP &&
+ g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum )
+ {
+ pDspConfig = &g_pCurrentBp->VoIPDspInfo[i];
+ break;
+ }
+ }
+ }
+
+ return pDspConfig;
+}
+
+
+/**************************************************************************
+ * Name : BpSetBoardId
+ *
+ * Description: This function find the BOARD_PARAMETERS structure for the
+ * specified board id string and assigns it to a global, static
+ * variable.
+ *
+ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
+ * have a board parameters configuration record.
+ ***************************************************************************/
+int BpSetBoardId( char *pszBoardId )
+{
+ int nRet = BP_BOARD_ID_NOT_FOUND;
+ PBOARD_PARAMETERS *ppBp;
+
+ for( ppBp = g_BoardParms; *ppBp; ppBp++ )
+ {
+ if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) )
+ {
+ g_pCurrentBp = *ppBp;
+ nRet = BP_SUCCESS;
+ break;
+ }
+ }
+
+ return( nRet );
+} /* BpSetBoardId */
+
+/**************************************************************************
+ * Name : BpGetBoardIds
+ *
+ * Description: This function returns all of the supported board id strings.
+ *
+ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
+ * strings are returned in. Each id starts at BP_BOARD_ID_LEN
+ * boundary.
+ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
+ * were allocated in pszBoardIds.
+ *
+ * Returns : Number of board id strings returned.
+ ***************************************************************************/
+int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize )
+{
+ PBOARD_PARAMETERS *ppBp;
+ int i;
+ char *src;
+ char *dest;
+
+ for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize;
+ i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN )
+ {
+ dest = pszBoardIds;
+ src = (*ppBp)->szBoardId;
+ while( *src )
+ *dest++ = *src++;
+ *dest = '\0';
+ }
+
+ return( i );
+} /* BpGetBoardIds */
+
+/**************************************************************************
+ * Name : BpGetEthernetMacInfo
+ *
+ * Description: This function returns all of the supported board id strings.
+ *
+ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
+ * buffers.
+ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
+ * are pointed to by pEnetInfos.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ ***************************************************************************/
+int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos )
+{
+ int i, nRet;
+
+ if( g_pCurrentBp )
+ {
+ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ )
+ {
+ if( i < BP_MAX_ENET_MACS )
+ {
+ unsigned char *src = (unsigned char *)
+ &g_pCurrentBp->EnetMacInfos[i];
+ unsigned char *dest = (unsigned char *) pEnetInfos;
+ int len = sizeof(ETHERNET_MAC_INFO);
+ while( len-- )
+ *dest++ = *src++;
+ }
+ else
+ pEnetInfos->ucPhyType = BP_ENET_NO_PHY;
+ }
+
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ )
+ pEnetInfos->ucPhyType = BP_ENET_NO_PHY;
+
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetEthernetMacInfo */
+
+/**************************************************************************
+ * Name : BpGetSdramSize
+ *
+ * Description: This function returns a constant that describees the board's
+ * SDRAM type and size.
+ *
+ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
+ * is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ ***************************************************************************/
+int BpGetSdramSize( unsigned long *pulSdramSize )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pulSdramSize = g_pCurrentBp->usSdramSize;
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ *pulSdramSize = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetSdramSize */
+
+/**************************************************************************
+ * Name : BpGetPsiSize
+ *
+ * Description: This function returns the persistent storage size in K bytes.
+ *
+ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
+ * storage size is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ ***************************************************************************/
+int BpGetPsiSize( unsigned long *pulPsiSize )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pulPsiSize = g_pCurrentBp->usPsiSize;
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ *pulPsiSize = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetPsiSize */
+
+/**************************************************************************
+ * Name : BpGetRj11InnerOuterPairGpios
+ *
+ * Description: This function returns the GPIO pin assignments for changing
+ * between the RJ11 inner pair and RJ11 outer pair.
+ *
+ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
+ * GPIO pin is returned in.
+ * [OUT] pusOuter - Address of short word that the RJ11 outer pair
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, values are returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
+ unsigned short *pusOuter )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pusInner = g_pCurrentBp->usGpioRj11InnerPair;
+ *pusOuter = g_pCurrentBp->usGpioRj11OuterPair;
+
+ if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED &&
+ g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusInner = *pusOuter = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetRj11InnerOuterPairGpios */
+
+/**************************************************************************
+ * Name : BpGetPressAndHoldResetGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the press
+ * and hold reset button.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the press and hold
+ * reset button GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetPressAndHoldResetGpio( unsigned short *pusValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pusValue = g_pCurrentBp->usGpioPressAndHoldReset;
+
+ if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetPressAndHoldResetGpio */
+
+/**************************************************************************
+ * Name : BpGetVoipResetGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the VOIP
+ * Reset operation.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
+ * GPIO pin is returned in.
+ * [IN] dspNum - Address of the DSP to query.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
+
+ if( pDspInfo )
+ {
+ *pusValue = pDspInfo->usGpioVoipReset;
+
+ if( *pusValue != BP_NOT_DEFINED ||
+ *pusValue == BP_UNEQUIPPED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_FOUND;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetVoipResetGpio */
+
+/**************************************************************************
+ * Name : BpGetVoipIntrGpio
+ *
+ * Description: This function returns the GPIO pin assignment for VoIP interrupt.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
+ * GPIO pin is returned in.
+ * [IN] dspNum - Address of the DSP to query.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
+
+ if( pDspInfo )
+ {
+ *pusValue = pDspInfo->usGpioVoipIntr;
+
+ if( *pusValue != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_FOUND;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetVoipIntrGpio */
+
+/**************************************************************************
+ * Name : BpGetPcmciaResetGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the PCMCIA
+ * Reset operation.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetPcmciaResetGpio( unsigned short *pusValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pusValue = g_pCurrentBp->usGpioPcmciaReset;
+
+ if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetPcmciaResetGpio */
+
+/**************************************************************************
+ * Name : BpGetUartRtsCtsGpios
+ *
+ * Description: This function returns the GPIO pin assignments for RTS and CTS
+ * UART signals.
+ *
+ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
+ * pin is returned in.
+ * [OUT] pusCts - Address of short word that the UART CTS GPIO
+ * pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, values are returned.
+ * BP_BOARD_ID_NOT_SET - Error, board id input string does not
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pusRts = g_pCurrentBp->usGpioUartRts;
+ *pusCts = g_pCurrentBp->usGpioUartCts;
+
+ if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED &&
+ g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusRts = *pusCts = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetUartRtsCtsGpios */
+
+/**************************************************************************
+ * Name : BpGetAdslLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the ADSL
+ * LED.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetAdslLedGpio( unsigned short *pusValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pusValue = g_pCurrentBp->usGpioLedAdsl;
+
+ if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetAdslLedGpio */
+
+/**************************************************************************
+ * Name : BpGetAdslFailLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the ADSL
+ * LED that is used when there is a DSL connection failure.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetAdslFailLedGpio( unsigned short *pusValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pusValue = g_pCurrentBp->usGpioLedAdslFail;
+
+ if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetAdslFailLedGpio */
+
+/**************************************************************************
+ * Name : BpGetWirelessLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the Wireless
+ * LED.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetWirelessLedGpio( unsigned short *pusValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pusValue = g_pCurrentBp->usGpioLedWireless;
+
+ if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetWirelessLedGpio */
+
+/**************************************************************************
+ * Name : BpGetWirelessAntInUse
+ *
+ * Description: This function returns the antennas in use for wireless
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
+ * is in use.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetWirelessAntInUse( unsigned short *pusValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pusValue = g_pCurrentBp->usAntInUseWireless;
+
+ if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetWirelessAntInUse */
+
+/**************************************************************************
+ * Name : BpGetWirelessSesBtnGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the Wireless
+ * Ses Button.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetWirelessSesBtnGpio( unsigned short *pusValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pusValue = g_pCurrentBp->usGpioSesBtnWireless;
+
+ if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetWirelessSesBtnGpio */
+
+/**************************************************************************
+ * Name : BpGetWirelessSesExtIntr
+ *
+ * Description: This function returns the external interrupt number for the
+ * Wireless Ses Button.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
+ * external interrup is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetWirelessSesExtIntr( unsigned short *pusValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless;
+
+ if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+
+} /* BpGetWirelessSesExtIntr */
+
+/**************************************************************************
+ * Name : BpGetWirelessSesLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the Wireless
+ * Ses Led.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
+ * Led GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetWirelessSesLedGpio( unsigned short *pusValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pusValue = g_pCurrentBp->usGpioLedSesWireless;
+
+ if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+
+} /* BpGetWirelessSesLedGpio */
+
+/**************************************************************************
+ * Name : BpGetUsbLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the USB
+ * LED.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the USB LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetUsbLedGpio( unsigned short *pusValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pusValue = g_pCurrentBp->usGpioLedUsb;
+
+ if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetUsbLedGpio */
+
+/**************************************************************************
+ * Name : BpGetHpnaLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the HPNA
+ * LED.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetHpnaLedGpio( unsigned short *pusValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pusValue = g_pCurrentBp->usGpioLedHpna;
+
+ if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetHpnaLedGpio */
+
+/**************************************************************************
+ * Name : BpGetWanDataLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the WAN Data
+ * LED.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetWanDataLedGpio( unsigned short *pusValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pusValue = g_pCurrentBp->usGpioLedWanData;
+
+ if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetWanDataLedGpio */
+
+/**************************************************************************
+ * Name : BpGetPppLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the PPP
+ * LED.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetPppLedGpio( unsigned short *pusValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pusValue = g_pCurrentBp->usGpioLedPpp;
+
+ if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetPppLedGpio */
+
+/**************************************************************************
+ * Name : BpGetPppFailLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the PPP
+ * LED that is used when there is a PPP connection failure.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetPppFailLedGpio( unsigned short *pusValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pusValue = g_pCurrentBp->usGpioLedPppFail;
+
+ if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetPppFailLedGpio */
+
+/**************************************************************************
+ * Name : BpGetBootloaderPowerOnLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the power
+ * on LED that is set by the bootloader.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pusValue = g_pCurrentBp->usGpioLedBlPowerOn;
+
+ if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetBootloaderPowerOn */
+
+/**************************************************************************
+ * Name : BpGetBootloaderAlarmLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the alarm
+ * LED that is set by the bootloader.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pusValue = g_pCurrentBp->usGpioLedBlAlarm;
+
+ if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetBootloaderAlarmLedGpio */
+
+/**************************************************************************
+ * Name : BpGetBootloaderResetCfgLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the reset
+ * configuration LED that is set by the bootloader.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the reset
+ * configuration LED GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pusValue = g_pCurrentBp->usGpioLedBlResetCfg;
+
+ if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetBootloaderResetCfgLedGpio */
+
+/**************************************************************************
+ * Name : BpGetBootloaderStopLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the break
+ * into bootloader LED that is set by the bootloader.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the break into
+ * bootloader LED GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetBootloaderStopLedGpio( unsigned short *pusValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pusValue = g_pCurrentBp->usGpioLedBlStop;
+
+ if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetBootloaderStopLedGpio */
+
+/**************************************************************************
+ * Name : BpGetVoipLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the VOIP
+ * LED.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ *
+ * Note : The VoIP structure would allow for having one LED per DSP
+ * however, the board initialization function assumes only one
+ * LED per functionality (ie one LED for VoIP). Therefore in
+ * order to keep this tidy and simple we do not make usage of the
+ * one-LED-per-DSP function. Instead, we assume that the LED for
+ * VoIP is unique and associated with DSP 0 (always present on
+ * any VoIP platform). If changing this to a LED-per-DSP function
+ * then one need to update the board initialization driver in
+ * bcmdrivers\opensource\char\board\bcm963xx\impl1
+ ***************************************************************************/
+int BpGetVoipLedGpio( unsigned short *pusValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 );
+
+ if( pDspInfo )
+ {
+ *pusValue = pDspInfo->usGpioLedVoip;
+
+ if( *pusValue != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_FOUND;
+ }
+ }
+ else
+ {
+ *pusValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetVoipLedGpio */
+
+/**************************************************************************
+ * Name : BpGetWirelessExtIntr
+ *
+ * Description: This function returns the Wireless external interrupt number.
+ *
+ * Parameters : [OUT] pulValue - Address of short word that the wireless
+ * external interrupt number is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetWirelessExtIntr( unsigned long *pulValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pulValue = g_pCurrentBp->usExtIntrWireless;
+
+ if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pulValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetWirelessExtIntr */
+
+/**************************************************************************
+ * Name : BpGetAdslDyingGaspExtIntr
+ *
+ * Description: This function returns the ADSL Dying Gasp external interrupt
+ * number.
+ *
+ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
+ * external interrupt number is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp;
+
+ if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pulValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetAdslDyingGaspExtIntr */
+
+/**************************************************************************
+ * Name : BpGetVoipExtIntr
+ *
+ * Description: This function returns the VOIP external interrupt number.
+ *
+ * Parameters : [OUT] pulValue - Address of short word that the VOIP
+ * external interrupt number is returned in.
+ * [IN] dspNum - Address of the DSP to query.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
+
+ if( pDspInfo )
+ {
+ *pulValue = pDspInfo->usExtIntrVoip;
+
+ if( *pulValue != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pulValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_FOUND;
+ }
+ }
+ else
+ {
+ *pulValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetVoipExtIntr */
+
+/**************************************************************************
+ * Name : BpGetHpnaExtIntr
+ *
+ * Description: This function returns the HPNA external interrupt number.
+ *
+ * Parameters : [OUT] pulValue - Address of short word that the HPNA
+ * external interrupt number is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetHpnaExtIntr( unsigned long *pulValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pulValue = g_pCurrentBp->usExtIntrHpna;
+
+ if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pulValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetHpnaExtIntr */
+
+/**************************************************************************
+ * Name : BpGetHpnaChipSelect
+ *
+ * Description: This function returns the HPNA chip select number.
+ *
+ * Parameters : [OUT] pulValue - Address of short word that the HPNA
+ * chip select number is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetHpnaChipSelect( unsigned long *pulValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ *pulValue = g_pCurrentBp->usCsHpna;
+
+ if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pulValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetHpnaChipSelect */
+
+/**************************************************************************
+ * Name : BpGetVoipChipSelect
+ *
+ * Description: This function returns the VOIP chip select number.
+ *
+ * Parameters : [OUT] pulValue - Address of short word that the VOIP
+ * chip select number is returned in.
+ * [IN] dspNum - Address of the DSP to query.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue )
+{
+ int nRet;
+
+ if( g_pCurrentBp )
+ {
+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
+
+ if( pDspInfo )
+ {
+ *pulValue = pDspInfo->usCsVoip;
+
+ if( *pulValue != BP_NOT_DEFINED )
+ {
+ nRet = BP_SUCCESS;
+ }
+ else
+ {
+ nRet = BP_VALUE_NOT_DEFINED;
+ }
+ }
+ else
+ {
+ *pulValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_FOUND;
+ }
+ }
+ else
+ {
+ *pulValue = BP_NOT_DEFINED;
+ nRet = BP_BOARD_ID_NOT_SET;
+ }
+
+ return( nRet );
+} /* BpGetVoipChipSelect */
+
diff -urN linux-2.6.19/arch/mips/bcm963xx/boardparms.h linux-2.6.19.new/arch/mips/bcm963xx/boardparms.h
--- linux-2.6.19/arch/mips/bcm963xx/boardparms.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/boardparms.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,758 @@
+/*
+<:copyright-gpl
+
+ Copyright 2003 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+
+:>
+*/
+/**************************************************************************
+ * File Name : boardparms.h
+ *
+ * Description: This file contains definitions and function prototypes for
+ * the BCM63xx board parameter access functions.
+ *
+ * Updates : 07/14/2003 Created.
+ ***************************************************************************/
+
+#if !defined(_BOARDPARMS_H)
+#define _BOARDPARMS_H
+
+/* Return codes. */
+#define BP_SUCCESS 0
+#define BP_BOARD_ID_NOT_FOUND 1
+#define BP_VALUE_NOT_DEFINED 2
+#define BP_BOARD_ID_NOT_SET 3
+
+/* Values for BpGetSdramSize. */
+#define BP_MEMORY_8MB_1_CHIP 0
+#define BP_MEMORY_16MB_1_CHIP 1
+#define BP_MEMORY_32MB_1_CHIP 2
+#define BP_MEMORY_64MB_2_CHIP 3
+#define BP_MEMORY_32MB_2_CHIP 4
+#define BP_MEMORY_16MB_2_CHIP 5
+
+/* Values for EthernetMacInfo PhyType. */
+#define BP_ENET_NO_PHY 0
+#define BP_ENET_INTERNAL_PHY 1
+#define BP_ENET_EXTERNAL_PHY 2
+#define BP_ENET_EXTERNAL_SWITCH 3
+
+/* Values for EthernetMacInfo Configuration type. */
+#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */
+#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */
+#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */
+#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */
+#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */
+#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */
+#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */
+
+/* Values for EthernetMacInfo Reverse MII. */
+#define BP_ENET_NO_REVERSE_MII 0
+#define BP_ENET_REVERSE_MII 1
+
+/* Values for VoIPDSPInfo DSPType. */
+#define BP_VOIP_NO_DSP 0
+#define BP_VOIP_DSP 1
+
+
+/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */
+#define BP_ACTIVE_MASK 0x8000
+#define BP_ACTIVE_HIGH 0x0000
+#define BP_ACTIVE_LOW 0x8000
+#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH)
+#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW)
+#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH)
+#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW)
+#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH)
+#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW)
+#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH)
+#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW)
+#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH)
+#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW)
+#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH)
+#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW)
+#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH)
+#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW)
+#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH)
+#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW)
+#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH)
+#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW)
+#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH)
+#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW)
+#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH)
+#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW)
+#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH)
+#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW)
+#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH)
+#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW)
+#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH)
+#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW)
+#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH)
+#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW)
+#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH)
+#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW)
+#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH)
+#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW)
+#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH)
+#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW)
+#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH)
+#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW)
+#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH)
+#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW)
+#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH)
+#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW)
+#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH)
+#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW)
+#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH)
+#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW)
+#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH)
+#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW)
+#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH)
+#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW)
+#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH)
+#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW)
+#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH)
+#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW)
+#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH)
+#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW)
+#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH)
+#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW)
+#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH)
+#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW)
+#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH)
+#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW)
+#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH)
+#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW)
+#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH)
+#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW)
+#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH)
+#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW)
+#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH)
+#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW)
+#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH)
+#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW)
+#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH)
+#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW)
+
+/* Values for external interrupt assignments. */
+#define BP_EXT_INTR_0 0
+#define BP_EXT_INTR_1 1
+#define BP_EXT_INTR_2 2
+#define BP_EXT_INTR_3 3
+
+/* Values for chip select assignments. */
+#define BP_CS_0 0
+#define BP_CS_1 1
+#define BP_CS_2 2
+#define BP_CS_3 3
+
+/* Value for GPIO and external interrupt fields that are not used. */
+#define BP_NOT_DEFINED 0xffff
+#define BP_HW_DEFINED 0xfff0
+#define BP_UNEQUIPPED 0xfff1
+
+/* Maximum size of the board id string. */
+#define BP_BOARD_ID_LEN 16
+
+/* Maximum number of Ethernet MACs. */
+#define BP_MAX_ENET_MACS 2
+
+/* Maximum number of VoIP DSPs. */
+#define BP_MAX_VOIP_DSP 2
+
+/* Wireless Antenna Settings. */
+#define BP_WLAN_ANT_MAIN 0
+#define BP_WLAN_ANT_AUX 1
+#define BP_WLAN_ANT_BOTH 3
+
+#if !defined(__ASSEMBLER__)
+
+/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY,
+ * then the other fields are not valid.
+ */
+typedef struct EthernetMacInfo
+{
+ unsigned char ucPhyType; /* BP_ENET_xxx */
+ unsigned char ucPhyAddress; /* 0 to 31 */
+ unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */
+ unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */
+ unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */
+ unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */
+ unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */
+ unsigned short numSwitchPorts; /* Number of PHY ports */
+ unsigned short usConfigType; /* Configuration type */
+ unsigned short usReverseMii; /* Reverse MII */
+} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO;
+
+
+/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP,
+ * then the other fields are not valid.
+ */
+typedef struct VoIPDspInfo
+{
+ unsigned char ucDspType;
+ unsigned char ucDspAddress;
+ unsigned short usExtIntrVoip;
+ unsigned short usGpioVoipReset;
+ unsigned short usGpioVoipIntr;
+ unsigned short usGpioLedVoip;
+ unsigned short usCsVoip;
+
+} VOIP_DSP_INFO;
+
+
+/**************************************************************************
+ * Name : BpSetBoardId
+ *
+ * Description: This function find the BOARD_PARAMETERS structure for the
+ * specified board id string and assigns it to a global, static
+ * variable.
+ *
+ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
+ * have a board parameters configuration record.
+ ***************************************************************************/
+int BpSetBoardId( char *pszBoardId );
+
+/**************************************************************************
+ * Name : BpGetBoardIds
+ *
+ * Description: This function returns all of the supported board id strings.
+ *
+ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
+ * strings are returned in. Each id starts at BP_BOARD_ID_LEN
+ * boundary.
+ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
+ * were allocated in pszBoardIds.
+ *
+ * Returns : Number of board id strings returned.
+ ***************************************************************************/
+int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize );
+
+/**************************************************************************
+ * Name : BpGetEthernetMacInfo
+ *
+ * Description: This function returns all of the supported board id strings.
+ *
+ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
+ * buffers.
+ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
+ * are pointed to by pEnetInfos.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ ***************************************************************************/
+int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos );
+
+/**************************************************************************
+ * Name : BpGetSdramSize
+ *
+ * Description: This function returns a constant that describees the board's
+ * SDRAM type and size.
+ *
+ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
+ * is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ ***************************************************************************/
+int BpGetSdramSize( unsigned long *pulSdramSize );
+
+/**************************************************************************
+ * Name : BpGetPsiSize
+ *
+ * Description: This function returns the persistent storage size in K bytes.
+ *
+ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
+ * storage size is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ ***************************************************************************/
+int BpGetPsiSize( unsigned long *pulPsiSize );
+
+/**************************************************************************
+ * Name : BpGetRj11InnerOuterPairGpios
+ *
+ * Description: This function returns the GPIO pin assignments for changing
+ * between the RJ11 inner pair and RJ11 outer pair.
+ *
+ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
+ * GPIO pin is returned in.
+ * [OUT] pusOuter - Address of short word that the RJ11 outer pair
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, values are returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
+ unsigned short *pusOuter );
+
+/**************************************************************************
+ * Name : BpGetPressAndHoldResetGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the press
+ * and hold reset button.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the press and hold
+ * reset button GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetPressAndHoldResetGpio( unsigned short *pusValue );
+
+/**************************************************************************
+ * Name : BpGetVoipResetGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the VOIP
+ * Reset operation.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
+ * GPIO pin is returned in.
+ * [IN] dspNum - Address of the DSP to query.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue );
+
+/**************************************************************************
+ * Name : BpGetVoipIntrGpio
+ *
+ * Description: This function returns the GPIO pin assignment for VoIP interrupt.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
+ * GPIO pin is returned in.
+ * [IN] dspNum - Address of the DSP to query.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue );
+
+/**************************************************************************
+ * Name : BpGetPcmciaResetGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the PCMCIA
+ * Reset operation.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetPcmciaResetGpio( unsigned short *pusValue );
+
+/**************************************************************************
+ * Name : BpGetUartRtsCtsGpios
+ *
+ * Description: This function returns the GPIO pin assignments for RTS and CTS
+ * UART signals.
+ *
+ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
+ * pin is returned in.
+ * [OUT] pusCts - Address of short word that the UART CTS GPIO
+ * pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, values are returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts );
+
+/**************************************************************************
+ * Name : BpGetAdslLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the ADSL
+ * LED.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetAdslLedGpio( unsigned short *pusValue );
+
+/**************************************************************************
+ * Name : BpGetAdslFailLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the ADSL
+ * LED that is used when there is a DSL connection failure.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetAdslFailLedGpio( unsigned short *pusValue );
+
+/**************************************************************************
+ * Name : BpGetWirelessLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the Wireless
+ * LED.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetWirelessLedGpio( unsigned short *pusValue );
+
+/**************************************************************************
+ * Name : BpGetWirelessAntInUse
+ *
+ * Description: This function returns the antennas in use for wireless
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
+ * is in use.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetWirelessAntInUse( unsigned short *pusValue );
+
+/**************************************************************************
+ * Name : BpGetWirelessSesBtnGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the Wireless
+ * Ses Button.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
+ * Button GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetWirelessSesBtnGpio( unsigned short *pusValue );
+
+/**************************************************************************
+ * Name : BpGetWirelessSesExtIntr
+ *
+ * Description: This function returns the external interrupt number for the
+ * Wireless Ses Button.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
+ * external interrup is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetWirelessSesExtIntr( unsigned short *pusValue );
+
+/**************************************************************************
+ * Name : BpGetWirelessSesLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the Wireless
+ * Ses Led.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
+ * Led GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetWirelessSesLedGpio( unsigned short *pusValue );
+
+/**************************************************************************
+ * Name : BpGetUsbLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the USB
+ * LED.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the USB LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetUsbLedGpio( unsigned short *pusValue );
+
+/**************************************************************************
+ * Name : BpGetHpnaLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the HPNA
+ * LED.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetHpnaLedGpio( unsigned short *pusValue );
+
+/**************************************************************************
+ * Name : BpGetWanDataLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the WAN Data
+ * LED.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetWanDataLedGpio( unsigned short *pusValue );
+
+/**************************************************************************
+ * Name : BpGetPppLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the PPP
+ * LED.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetPppLedGpio( unsigned short *pusValue );
+
+/**************************************************************************
+ * Name : BpGetPppFailLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the PPP
+ * LED that is used when there is a PPP connection failure.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetPppFailLedGpio( unsigned short *pusValue );
+
+/**************************************************************************
+ * Name : BpGetVoipLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the VOIP
+ * LED.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetVoipLedGpio( unsigned short *pusValue );
+
+/**************************************************************************
+ * Name : BpGetBootloaderPowerOnLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the power
+ * on LED that is set by the bootloader.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue );
+
+/**************************************************************************
+ * Name : BpGetBootloaderAlarmLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the alarm
+ * LED that is set by the bootloader.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED
+ * GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue );
+
+/**************************************************************************
+ * Name : BpGetBootloaderResetCfgLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the reset
+ * configuration LED that is set by the bootloader.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the reset
+ * configuration LED GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue );
+
+/**************************************************************************
+ * Name : BpGetBootloaderStopLedGpio
+ *
+ * Description: This function returns the GPIO pin assignment for the break
+ * into bootloader LED that is set by the bootloader.
+ *
+ * Parameters : [OUT] pusValue - Address of short word that the break into
+ * bootloader LED GPIO pin is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetBootloaderStopLedGpio( unsigned short *pusValue );
+
+/**************************************************************************
+ * Name : BpGetWirelessExtIntr
+ *
+ * Description: This function returns the Wireless external interrupt number.
+ *
+ * Parameters : [OUT] pulValue - Address of short word that the wireless
+ * external interrupt number is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetWirelessExtIntr( unsigned long *pulValue );
+
+/**************************************************************************
+ * Name : BpGetAdslDyingGaspExtIntr
+ *
+ * Description: This function returns the ADSL Dying Gasp external interrupt
+ * number.
+ *
+ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
+ * external interrupt number is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue );
+
+/**************************************************************************
+ * Name : BpGetVoipExtIntr
+ *
+ * Description: This function returns the VOIP external interrupt number.
+ *
+ * Parameters : [OUT] pulValue - Address of short word that the VOIP
+ * external interrupt number is returned in.
+ * [IN] dspNum - Address of the DSP to query.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue );
+
+/**************************************************************************
+ * Name : BpGetHpnaExtIntr
+ *
+ * Description: This function returns the HPNA external interrupt number.
+ *
+ * Parameters : [OUT] pulValue - Address of short word that the HPNA
+ * external interrupt number is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetHpnaExtIntr( unsigned long *pulValue );
+
+/**************************************************************************
+ * Name : BpGetHpnaChipSelect
+ *
+ * Description: This function returns the HPNA chip select number.
+ *
+ * Parameters : [OUT] pulValue - Address of short word that the HPNA
+ * chip select number is returned in.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetHpnaChipSelect( unsigned long *pulValue );
+
+/**************************************************************************
+ * Name : BpGetVoipChipSelect
+ *
+ * Description: This function returns the VOIP chip select number.
+ *
+ * Parameters : [OUT] pulValue - Address of short word that the VOIP
+ * chip select number is returned in.
+ * [IN] dspNum - Address of the DSP to query.
+ *
+ * Returns : BP_SUCCESS - Success, value is returned.
+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined
+ * for the board.
+ ***************************************************************************/
+int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue );
+
+#endif /* __ASSEMBLER__ */
+
+#endif /* _BOARDPARMS_H */
+
diff -urN linux-2.6.19/arch/mips/bcm963xx/include/6338_intr.h linux-2.6.19.new/arch/mips/bcm963xx/include/6338_intr.h
--- linux-2.6.19/arch/mips/bcm963xx/include/6338_intr.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/include/6338_intr.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,64 @@
+/*
+<:copyright-gpl
+ Copyright 2003 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __6338_INTR_H
+#define __6338_INTR_H
+
+/*=====================================================================*/
+/* BCM6338 External Interrupt Level Assignments */
+/*=====================================================================*/
+#define INTERRUPT_ID_EXTERNAL_0 3
+#define INTERRUPT_ID_EXTERNAL_1 4
+#define INTERRUPT_ID_EXTERNAL_2 5
+#define INTERRUPT_ID_EXTERNAL_3 6
+
+/*=====================================================================*/
+/* BCM6338 Timer Interrupt Level Assignments */
+/*=====================================================================*/
+#define MIPS_TIMER_INT 7
+
+/*=====================================================================*/
+/* Peripheral ISR Table Offset */
+/*=====================================================================*/
+#define INTERNAL_ISR_TABLE_OFFSET 8
+
+/*=====================================================================*/
+/* Logical Peripheral Interrupt IDs */
+/*=====================================================================*/
+
+#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
+#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1)
+#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
+#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 4)
+#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 5)
+#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 6)
+#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 7)
+#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8)
+#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9)
+#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 10)
+#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 11)
+#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 12)
+#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 13)
+#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14)
+#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15)
+#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16)
+#define INTERRUPT_ID_SDIO (INTERNAL_ISR_TABLE_OFFSET + 17)
+
+#endif /* __BCM6338_H */
+
diff -urN linux-2.6.19/arch/mips/bcm963xx/include/6338_map_part.h linux-2.6.19.new/arch/mips/bcm963xx/include/6338_map_part.h
--- linux-2.6.19/arch/mips/bcm963xx/include/6338_map_part.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/include/6338_map_part.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,334 @@
+/*
+<:copyright-gpl
+ Copyright 2004 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __BCM6338_MAP_H
+#define __BCM6338_MAP_H
+
+#include "bcmtypes.h"
+
+#define PERF_BASE 0xfffe0000
+#define TIMR_BASE 0xfffe0200
+#define UART_BASE 0xfffe0300
+#define GPIO_BASE 0xfffe0400
+#define SPI_BASE 0xfffe0c00
+
+typedef struct PerfControl {
+ uint32 RevID;
+ uint16 testControl;
+ uint16 blkEnables;
+#define EMAC_CLK_EN 0x0010
+#define USBS_CLK_EN 0x0010
+#define SAR_CLK_EN 0x0020
+
+#define SPI_CLK_EN 0x0200
+
+ uint32 pll_control;
+#define SOFT_RESET 0x00000001
+
+ uint32 IrqMask;
+ uint32 IrqStatus;
+
+ uint32 ExtIrqCfg;
+#define EI_SENSE_SHFT 0
+#define EI_STATUS_SHFT 5
+#define EI_CLEAR_SHFT 10
+#define EI_MASK_SHFT 15
+#define EI_INSENS_SHFT 20
+#define EI_LEVEL_SHFT 25
+
+ uint32 unused[4]; /* (18) */
+ uint32 BlockSoftReset; /* (28) */
+#define BSR_SPI 0x00000001
+#define BSR_EMAC 0x00000004
+#define BSR_USBH 0x00000008
+#define BSR_USBS 0x00000010
+#define BSR_ADSL 0x00000020
+#define BSR_DMAMEM 0x00000040
+#define BSR_SAR 0x00000080
+#define BSR_ACLC 0x00000100
+#define BSR_ADSL_MIPS_PLL 0x00000400
+#define BSR_ALL_BLOCKS \
+ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
+ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL)
+} PerfControl;
+
+#define PERF ((volatile PerfControl * const) PERF_BASE)
+
+
+typedef struct Timer {
+ uint16 unused0;
+ byte TimerMask;
+#define TIMER0EN 0x01
+#define TIMER1EN 0x02
+#define TIMER2EN 0x04
+ byte TimerInts;
+#define TIMER0 0x01
+#define TIMER1 0x02
+#define TIMER2 0x04
+#define WATCHDOG 0x08
+ uint32 TimerCtl0;
+ uint32 TimerCtl1;
+ uint32 TimerCtl2;
+#define TIMERENABLE 0x80000000
+#define RSTCNTCLR 0x40000000
+ uint32 TimerCnt0;
+ uint32 TimerCnt1;
+ uint32 TimerCnt2;
+ uint32 WatchDogDefCount;
+
+ /* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * Read from this register returns current watch dog count
+ */
+ uint32 WatchDogCtl;
+
+ /* Number of 40-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount;
+} Timer;
+
+#define TIMER ((volatile Timer * const) TIMR_BASE)
+typedef struct UartChannel {
+ byte unused0;
+ byte control;
+#define BRGEN 0x80 /* Control register bit defs */
+#define TXEN 0x40
+#define RXEN 0x20
+#define LOOPBK 0x10
+#define TXPARITYEN 0x08
+#define TXPARITYEVEN 0x04
+#define RXPARITYEN 0x02
+#define RXPARITYEVEN 0x01
+
+ byte config;
+#define XMITBREAK 0x40
+#define BITS5SYM 0x00
+#define BITS6SYM 0x10
+#define BITS7SYM 0x20
+#define BITS8SYM 0x30
+#define ONESTOP 0x07
+#define TWOSTOP 0x0f
+ /* 4-LSBS represent STOP bits/char
+ * in 1/8 bit-time intervals. Zero
+ * represents 1/8 stop bit interval.
+ * Fifteen represents 2 stop bits.
+ */
+ byte fifoctl;
+#define RSTTXFIFOS 0x80
+#define RSTRXFIFOS 0x40
+ /* 5-bit TimeoutCnt is in low bits of this register.
+ * This count represents the number of characters
+ * idle times before setting receive Irq when below threshold
+ */
+ uint32 baudword;
+ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
+ */
+
+ byte txf_levl; /* Read-only fifo depth */
+ byte rxf_levl; /* Read-only fifo depth */
+ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are
+ * RxThreshold. Irq can be asserted
+ * when rx fifo> thresh, txfifo<thresh
+ */
+ byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1)
+ * if these bits are also enabled to GPIO_o
+ */
+#define DTREN 0x01
+#define RTSEN 0x02
+
+ byte unused1;
+ byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to
+ * detect irq on rising AND falling
+ * edges for corresponding GPIO_i
+ * if enabled (edge insensitive)
+ */
+ byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense
+ * 0 for negedge sense if
+ * not configured for edge
+ * insensitive (see above)
+ * Lower 4 bits: Mask to enable change
+ * detection IRQ for corresponding
+ * GPIO_i
+ */
+ byte DeltaIP_SyncIP; /* Upper 4 bits show which bits
+ * have changed (may set IRQ).
+ * read automatically clears bit
+ * Lower 4 bits are actual status
+ */
+
+ uint16 intMask; /* Same Bit defs for Mask and status */
+ uint16 intStatus;
+#define DELTAIP 0x0001
+#define TXUNDERR 0x0002
+#define TXOVFERR 0x0004
+#define TXFIFOTHOLD 0x0008
+#define TXREADLATCH 0x0010
+#define TXFIFOEMT 0x0020
+#define RXUNDERR 0x0040
+#define RXOVFERR 0x0080
+#define RXTIMEOUT 0x0100
+#define RXFIFOFULL 0x0200
+#define RXFIFOTHOLD 0x0400
+#define RXFIFONE 0x0800
+#define RXFRAMERR 0x1000
+#define RXPARERR 0x2000
+#define RXBRK 0x4000
+
+ uint16 unused2;
+ uint16 Data; /* Write to TX, Read from RX */
+ /* bits 11:8 are BRK,PAR,FRM errors */
+
+ uint32 unused3;
+ uint32 unused4;
+} Uart;
+
+#define UART ((volatile Uart * const) UART_BASE)
+
+typedef struct GpioControl {
+ uint32 unused0;
+ uint32 GPIODir; /* bits 7:0 */
+ uint32 unused1;
+ uint32 GPIOio; /* bits 7:0 */
+ uint32 LEDCtrl;
+#define LED3_STROBE 0x08000000
+#define LED2_STROBE 0x04000000
+#define LED1_STROBE 0x02000000
+#define LED0_STROBE 0x01000000
+#define LED_TEST 0x00010000
+#define LED3_DISABLE_LINK_ACT 0x00008000
+#define LED2_DISABLE_LINK_ACT 0x00004000
+#define LED1_DISABLE_LINK_ACT 0x00002000
+#define LED0_DISABLE_LINK_ACT 0x00001000
+#define LED_INTERVAL_SET_MASK 0x00000f00
+#define LED_INTERVAL_SET_320MS 0x00000500
+#define LED_INTERVAL_SET_160MS 0x00000400
+#define LED_INTERVAL_SET_80MS 0x00000300
+#define LED_INTERVAL_SET_40MS 0x00000200
+#define LED_INTERVAL_SET_20MS 0x00000100
+#define LED3_ON 0x00000080
+#define LED2_ON 0x00000040
+#define LED1_ON 0x00000020
+#define LED0_ON 0x00000010
+#define LED3_ENABLE 0x00000008
+#define LED2_ENABLE 0x00000004
+#define LED1_ENABLE 0x00000002
+#define LED0_ENABLE 0x00000001
+ uint32 SpiSlaveCfg;
+#define SPI_SLAVE_RESET 0x00010000
+#define SPI_RESTRICT 0x00000400
+#define SPI_DELAY_DISABLE 0x00000200
+#define SPI_PROBE_MUX_SEL_MASK 0x000001e0
+#define SPI_SER_ADDR_CFG_MASK 0x0000000c
+#define SPI_MODE 0x00000001
+ uint32 vRegConfig;
+} GpioControl;
+
+#define GPIO ((volatile GpioControl * const) GPIO_BASE)
+
+/* Number to mask conversion macro used for GPIODir and GPIOio */
+#define GPIO_NUM_MAX_BITS_MASK 0x0f
+#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
+
+/*
+** Spi Controller
+*/
+
+typedef struct SpiControl {
+ uint16 spiCmd; /* (0x0): SPI command */
+#define SPI_CMD_START_IMMEDIATE 3
+
+#define SPI_CMD_COMMAND_SHIFT 0
+#define SPI_CMD_DEVICE_ID_SHIFT 4
+#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8
+
+ byte spiIntStatus; /* (0x2): SPI interrupt status */
+ byte spiMaskIntStatus; /* (0x3): SPI masked interrupt status */
+
+ byte spiIntMask; /* (0x4): SPI interrupt mask */
+#define SPI_INTR_CMD_DONE 0x01
+#define SPI_INTR_CLEAR_ALL 0x1f
+
+ byte spiStatus; /* (0x5): SPI status */
+
+ byte spiClkCfg; /* (0x6): SPI clock configuration */
+
+ byte spiFillByte; /* (0x7): SPI fill byte */
+
+ byte unused0;
+ byte spiMsgTail; /* (0x9): msgtail */
+ byte unused1;
+ byte spiRxTail; /* (0xB): rxtail */
+
+ uint32 unused2[13]; /* (0x0c - 0x3c) reserved */
+
+ byte spiMsgCtl; /* (0x40) control byte */
+#define HALF_DUPLEX_W 1
+#define HALF_DUPLEX_R 2
+#define SPI_MSG_TYPE_SHIFT 6
+#define SPI_BYTE_CNT_SHIFT 0
+ byte spiMsgData[63]; /* (0x41 - 0x7f) msg data */
+ byte spiRxDataFifo[64]; /* (0x80 - 0xbf) rx data */
+ byte unused3[64]; /* (0xc0 - 0xff) reserved */
+} SpiControl;
+
+#define SPI ((volatile SpiControl * const) SPI_BASE)
+
+/*
+** External Bus Interface
+*/
+typedef struct EbiChipSelect {
+ uint32 base; /* base address in upper 24 bits */
+#define EBI_SIZE_8K 0
+#define EBI_SIZE_16K 1
+#define EBI_SIZE_32K 2
+#define EBI_SIZE_64K 3
+#define EBI_SIZE_128K 4
+#define EBI_SIZE_256K 5
+#define EBI_SIZE_512K 6
+#define EBI_SIZE_1M 7
+#define EBI_SIZE_2M 8
+#define EBI_SIZE_4M 9
+#define EBI_SIZE_8M 10
+#define EBI_SIZE_16M 11
+#define EBI_SIZE_32M 12
+#define EBI_SIZE_64M 13
+#define EBI_SIZE_128M 14
+#define EBI_SIZE_256M 15
+ uint32 config;
+#define EBI_ENABLE 0x00000001 /* .. enable this range */
+#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */
+#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */
+#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */
+#define EBI_WREN 0x00000020 /* enable posted writes */
+#define EBI_POLARITY 0x00000040 /* .. set to invert something,
+ ** don't know what yet */
+#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */
+#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */
+#define EBI_FIFO 0x00000200 /* .. use fifo */
+#define EBI_RE 0x00000400 /* .. Reverse Endian */
+} EbiChipSelect;
+
+typedef struct MpiRegisters {
+ EbiChipSelect cs[1]; /* size chip select configuration */
+} MpiRegisters;
+
+#define MPI ((volatile MpiRegisters * const) MPI_BASE)
+
+
+#endif
+
diff -urN linux-2.6.19/arch/mips/bcm963xx/include/6345_intr.h linux-2.6.19.new/arch/mips/bcm963xx/include/6345_intr.h
--- linux-2.6.19/arch/mips/bcm963xx/include/6345_intr.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/include/6345_intr.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,72 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __6345_INTR_H
+#define __6345_INTR_H
+
+
+/*=====================================================================*/
+/* BCM6345 External Interrupt Level Assignments */
+/*=====================================================================*/
+#define INTERRUPT_ID_EXTERNAL_0 3
+#define INTERRUPT_ID_EXTERNAL_1 4
+#define INTERRUPT_ID_EXTERNAL_2 5
+#define INTERRUPT_ID_EXTERNAL_3 6
+
+/*=====================================================================*/
+/* BCM6345 Timer Interrupt Level Assignments */
+/*=====================================================================*/
+#define MIPS_TIMER_INT 7
+
+/*=====================================================================*/
+/* Peripheral ISR Table Offset */
+/*=====================================================================*/
+#define INTERNAL_ISR_TABLE_OFFSET 8
+#define DMA_ISR_TABLE_OFFSET (INTERNAL_ISR_TABLE_OFFSET + 13)
+
+/*=====================================================================*/
+/* Logical Peripheral Interrupt IDs */
+/*=====================================================================*/
+
+/* Internal peripheral interrupt IDs */
+#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
+#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
+#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 3)
+#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 4)
+#define INTERRUPT_ID_USB (INTERNAL_ISR_TABLE_OFFSET + 5)
+#define INTERRUPT_ID_EMAC (INTERNAL_ISR_TABLE_OFFSET + 8)
+#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 12)
+
+/* DMA channel interrupt IDs */
+#define INTERRUPT_ID_EMAC_RX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_RX_CHAN)
+#define INTERRUPT_ID_EMAC_TX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_TX_CHAN)
+#define INTERRUPT_ID_EBI_RX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_RX_CHAN)
+#define INTERRUPT_ID_EBI_TX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_TX_CHAN)
+#define INTERRUPT_ID_RESERVED_RX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_RX_CHAN)
+#define INTERRUPT_ID_RESERVED_TX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_TX_CHAN)
+#define INTERRUPT_ID_USB_BULK_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_RX_CHAN)
+#define INTERRUPT_ID_USB_BULK_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_TX_CHAN)
+#define INTERRUPT_ID_USB_CNTL_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_RX_CHAN)
+#define INTERRUPT_ID_USB_CNTL_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_TX_CHAN)
+#define INTERRUPT_ID_USB_ISO_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_RX_CHAN)
+#define INTERRUPT_ID_USB_ISO_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_TX_CHAN)
+
+
+#endif /* __BCM6345_H */
+
diff -urN linux-2.6.19/arch/mips/bcm963xx/include/6345_map_part.h linux-2.6.19.new/arch/mips/bcm963xx/include/6345_map_part.h
--- linux-2.6.19/arch/mips/bcm963xx/include/6345_map_part.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/include/6345_map_part.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,163 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __BCM6345_MAP_H
+#define __BCM6345_MAP_H
+
+
+#include "bcmtypes.h"
+#include "6345_intr.h"
+
+typedef struct IntControl {
+ uint32 RevID;
+ uint16 testControl;
+ uint16 blkEnables;
+#define USB_CLK_EN 0x0100
+#define EMAC_CLK_EN 0x0080
+#define UART_CLK_EN 0x0008
+#define CPU_CLK_EN 0x0001
+
+ uint32 pll_control;
+#define SOFT_RESET 0x00000001
+
+ uint32 IrqMask;
+ uint32 IrqStatus;
+
+ uint32 ExtIrqCfg;
+#define EI_SENSE_SHFT 0
+#define EI_STATUS_SHFT 4
+#define EI_CLEAR_SHFT 8
+#define EI_MASK_SHFT 12
+#define EI_INSENS_SHFT 16
+#define EI_LEVEL_SHFT 20
+} IntControl;
+
+#define INTC_BASE 0xfffe0000
+#define PERF ((volatile IntControl * const) INTC_BASE)
+
+#define TIMR_BASE 0xfffe0200
+typedef struct Timer {
+ uint16 unused0;
+ byte TimerMask;
+#define TIMER0EN 0x01
+#define TIMER1EN 0x02
+#define TIMER2EN 0x04
+ byte TimerInts;
+#define TIMER0 0x01
+#define TIMER1 0x02
+#define TIMER2 0x04
+#define WATCHDOG 0x08
+ uint32 TimerCtl0;
+ uint32 TimerCtl1;
+ uint32 TimerCtl2;
+#define TIMERENABLE 0x80000000
+#define RSTCNTCLR 0x40000000
+ uint32 TimerCnt0;
+ uint32 TimerCnt1;
+ uint32 TimerCnt2;
+ uint32 WatchDogDefCount;
+
+ /* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * Read from this register returns current watch dog count
+ */
+ uint32 WatchDogCtl;
+
+ /* Number of 40-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount;
+} Timer;
+
+#define TIMER ((volatile Timer * const) TIMR_BASE)
+
+typedef struct UartChannel {
+ byte unused0;
+ byte control;
+#define BRGEN 0x80 /* Control register bit defs */
+#define TXEN 0x40
+#define RXEN 0x20
+#define TXPARITYEN 0x08
+#define TXPARITYEVEN 0x04
+#define RXPARITYEN 0x02
+#define RXPARITYEVEN 0x01
+ byte config;
+#define BITS5SYM 0x00
+#define BITS6SYM 0x10
+#define BITS7SYM 0x20
+#define BITS8SYM 0x30
+#define XMITBREAK 0x40
+#define ONESTOP 0x07
+#define TWOSTOP 0x0f
+
+ byte fifoctl;
+#define RSTTXFIFOS 0x80
+#define RSTRXFIFOS 0x40
+ uint32 baudword;
+
+ byte txf_levl;
+ byte rxf_levl;
+ byte fifocfg;
+ byte prog_out;
+
+ byte unused1;
+ byte DeltaIPEdgeNoSense;
+ byte DeltaIPConfig_Mask;
+ byte DeltaIP_SyncIP;
+ uint16 intMask;
+ uint16 intStatus;
+#define TXUNDERR 0x0002
+#define TXOVFERR 0x0004
+#define TXFIFOEMT 0x0020
+#define RXOVFERR 0x0080
+#define RXFIFONE 0x0800
+#define RXFRAMERR 0x1000
+#define RXPARERR 0x2000
+#define RXBRK 0x4000
+
+ uint16 unused2;
+ uint16 Data;
+ uint32 unused3;
+ uint32 unused4;
+} Uart;
+
+#define UART_BASE 0xfffe0300
+#define UART ((volatile Uart * const) UART_BASE)
+
+typedef struct GpioControl {
+ uint16 unused0;
+ byte unused1;
+ byte TBusSel;
+
+ uint16 unused2;
+ uint16 GPIODir;
+ byte unused3;
+ byte Leds;
+ uint16 GPIOio;
+
+ uint32 UartCtl;
+} GpioControl;
+
+#define GPIO_BASE 0xfffe0400
+#define GPIO ((volatile GpioControl * const) GPIO_BASE)
+
+#define GPIO_NUM_MAX_BITS_MASK 0x0f
+#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
+
+
+#endif
+
diff -urN linux-2.6.19/arch/mips/bcm963xx/include/6348_intr.h linux-2.6.19.new/arch/mips/bcm963xx/include/6348_intr.h
--- linux-2.6.19/arch/mips/bcm963xx/include/6348_intr.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/include/6348_intr.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,74 @@
+/*
+<:copyright-gpl
+ Copyright 2003 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __6348_INTR_H
+#define __6348_INTR_H
+
+
+/*=====================================================================*/
+/* BCM6348 External Interrupt Level Assignments */
+/*=====================================================================*/
+#define INTERRUPT_ID_EXTERNAL_0 3
+#define INTERRUPT_ID_EXTERNAL_1 4
+#define INTERRUPT_ID_EXTERNAL_2 5
+#define INTERRUPT_ID_EXTERNAL_3 6
+
+/*=====================================================================*/
+/* BCM6348 Timer Interrupt Level Assignments */
+/*=====================================================================*/
+#define MIPS_TIMER_INT 7
+
+/*=====================================================================*/
+/* Peripheral ISR Table Offset */
+/*=====================================================================*/
+#define INTERNAL_ISR_TABLE_OFFSET 8
+
+/*=====================================================================*/
+/* Logical Peripheral Interrupt IDs */
+/*=====================================================================*/
+
+#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
+#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1)
+#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
+#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 4)
+#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 5)
+#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 6)
+#define INTERRUPT_ID_EMAC2 (INTERNAL_ISR_TABLE_OFFSET + 7)
+#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8)
+#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9)
+#define INTERRUPT_ID_M2M (INTERNAL_ISR_TABLE_OFFSET + 10)
+#define INTERRUPT_ID_ACLC (INTERNAL_ISR_TABLE_OFFSET + 11)
+#define INTERRUPT_ID_USBH (INTERNAL_ISR_TABLE_OFFSET + 12)
+#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 13)
+#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14)
+#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15)
+#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16)
+#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 17)
+#define INTERRUPT_ID_USB_ISO_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 18)
+#define INTERRUPT_ID_USB_ISO_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 19)
+#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 20)
+#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 21)
+#define INTERRUPT_ID_EMAC2_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 22)
+#define INTERRUPT_ID_EMAC2_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 23)
+#define INTERRUPT_ID_MPI (INTERNAL_ISR_TABLE_OFFSET + 24)
+#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 25)
+
+
+#endif /* __BCM6348_H */
+
diff -urN linux-2.6.19/arch/mips/bcm963xx/include/6348_map_part.h linux-2.6.19.new/arch/mips/bcm963xx/include/6348_map_part.h
--- linux-2.6.19/arch/mips/bcm963xx/include/6348_map_part.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/include/6348_map_part.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,500 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __BCM6348_MAP_H
+#define __BCM6348_MAP_H
+
+#include "bcmtypes.h"
+
+#define PERF_BASE 0xfffe0000
+#define TIMR_BASE 0xfffe0200
+#define UART_BASE 0xfffe0300
+#define GPIO_BASE 0xfffe0400
+#define MPI_BASE 0xfffe2000 /* MPI control registers */
+#define USB_HOST_BASE 0xfffe1b00 /* USB host registers */
+#define USB_HOST_NON_OHCI 0xfffe1c00 /* USB host non-OHCI registers */
+
+typedef struct PerfControl {
+ uint32 RevID;
+ uint16 testControl;
+ uint16 blkEnables;
+#define EMAC_CLK_EN 0x0010
+#define SAR_CLK_EN 0x0020
+#define USBS_CLK_EN 0x0040
+#define USBH_CLK_EN 0x0100
+
+ uint32 pll_control;
+#define SOFT_RESET 0x00000001
+
+ uint32 IrqMask;
+ uint32 IrqStatus;
+
+ uint32 ExtIrqCfg;
+#define EI_SENSE_SHFT 0
+#define EI_STATUS_SHFT 5
+#define EI_CLEAR_SHFT 10
+#define EI_MASK_SHFT 15
+#define EI_INSENS_SHFT 20
+#define EI_LEVEL_SHFT 25
+
+ uint32 unused[4]; /* (18) */
+ uint32 BlockSoftReset; /* (28) */
+#define BSR_SPI 0x00000001
+#define BSR_EMAC 0x00000004
+#define BSR_USBH 0x00000008
+#define BSR_USBS 0x00000010
+#define BSR_ADSL 0x00000020
+#define BSR_DMAMEM 0x00000040
+#define BSR_SAR 0x00000080
+#define BSR_ACLC 0x00000100
+#define BSR_ADSL_MIPS_PLL 0x00000400
+#define BSR_ALL_BLOCKS \
+ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
+ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL)
+ uint32 unused2[2]; /* (2c) */
+ uint32 PllStrap; /* (34) */
+#define PLL_N1_SHFT 20
+#define PLL_N1_MASK (7<<PLL_N1_SHFT)
+#define PLL_N2_SHFT 15
+#define PLL_N2_MASK (0x1f<<PLL_N2_SHFT)
+#define PLL_M1_REF_SHFT 12
+#define PLL_M1_REF_MASK (7<<PLL_M1_REF_SHFT)
+#define PLL_M2_REF_SHFT 9
+#define PLL_M2_REF_MASK (7<<PLL_M2_REF_SHFT)
+#define PLL_M1_CPU_SHFT 6
+#define PLL_M1_CPU_MASK (7<<PLL_M1_CPU_SHFT)
+#define PLL_M1_BUS_SHFT 3
+#define PLL_M1_BUS_MASK (7<<PLL_M1_BUS_SHFT)
+#define PLL_M2_BUS_SHFT 0
+#define PLL_M2_BUS_MASK (7<<PLL_M2_BUS_SHFT)
+} PerfControl;
+
+#define PERF ((volatile PerfControl * const) PERF_BASE)
+
+typedef struct Timer {
+ uint16 unused0;
+ byte TimerMask;
+#define TIMER0EN 0x01
+#define TIMER1EN 0x02
+#define TIMER2EN 0x04
+ byte TimerInts;
+#define TIMER0 0x01
+#define TIMER1 0x02
+#define TIMER2 0x04
+#define WATCHDOG 0x08
+ uint32 TimerCtl0;
+ uint32 TimerCtl1;
+ uint32 TimerCtl2;
+#define TIMERENABLE 0x80000000
+#define RSTCNTCLR 0x40000000
+ uint32 TimerCnt0;
+ uint32 TimerCnt1;
+ uint32 TimerCnt2;
+ uint32 WatchDogDefCount;
+
+ /* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * Read from this register returns current watch dog count
+ */
+ uint32 WatchDogCtl;
+
+ /* Number of 40-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount;
+} Timer;
+
+#define TIMER ((volatile Timer * const) TIMR_BASE)
+
+typedef struct UartChannel {
+ byte unused0;
+ byte control;
+#define BRGEN 0x80 /* Control register bit defs */
+#define TXEN 0x40
+#define RXEN 0x20
+#define LOOPBK 0x10
+#define TXPARITYEN 0x08
+#define TXPARITYEVEN 0x04
+#define RXPARITYEN 0x02
+#define RXPARITYEVEN 0x01
+
+ byte config;
+#define XMITBREAK 0x40
+#define BITS5SYM 0x00
+#define BITS6SYM 0x10
+#define BITS7SYM 0x20
+#define BITS8SYM 0x30
+#define ONESTOP 0x07
+#define TWOSTOP 0x0f
+ /* 4-LSBS represent STOP bits/char
+ * in 1/8 bit-time intervals. Zero
+ * represents 1/8 stop bit interval.
+ * Fifteen represents 2 stop bits.
+ */
+ byte fifoctl;
+#define RSTTXFIFOS 0x80
+#define RSTRXFIFOS 0x40
+ /* 5-bit TimeoutCnt is in low bits of this register.
+ * This count represents the number of characters
+ * idle times before setting receive Irq when below threshold
+ */
+ uint32 baudword;
+ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
+ */
+
+ byte txf_levl; /* Read-only fifo depth */
+ byte rxf_levl; /* Read-only fifo depth */
+ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are
+ * RxThreshold. Irq can be asserted
+ * when rx fifo> thresh, txfifo<thresh
+ */
+ byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1)
+ * if these bits are also enabled to GPIO_o
+ */
+#define DTREN 0x01
+#define RTSEN 0x02
+
+ byte unused1;
+ byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to
+ * detect irq on rising AND falling
+ * edges for corresponding GPIO_i
+ * if enabled (edge insensitive)
+ */
+ byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense
+ * 0 for negedge sense if
+ * not configured for edge
+ * insensitive (see above)
+ * Lower 4 bits: Mask to enable change
+ * detection IRQ for corresponding
+ * GPIO_i
+ */
+ byte DeltaIP_SyncIP; /* Upper 4 bits show which bits
+ * have changed (may set IRQ).
+ * read automatically clears bit
+ * Lower 4 bits are actual status
+ */
+
+ uint16 intMask; /* Same Bit defs for Mask and status */
+ uint16 intStatus;
+#define DELTAIP 0x0001
+#define TXUNDERR 0x0002
+#define TXOVFERR 0x0004
+#define TXFIFOTHOLD 0x0008
+#define TXREADLATCH 0x0010
+#define TXFIFOEMT 0x0020
+#define RXUNDERR 0x0040
+#define RXOVFERR 0x0080
+#define RXTIMEOUT 0x0100
+#define RXFIFOFULL 0x0200
+#define RXFIFOTHOLD 0x0400
+#define RXFIFONE 0x0800
+#define RXFRAMERR 0x1000
+#define RXPARERR 0x2000
+#define RXBRK 0x4000
+
+ uint16 unused2;
+ uint16 Data; /* Write to TX, Read from RX */
+ /* bits 11:8 are BRK,PAR,FRM errors */
+
+ uint32 unused3;
+ uint32 unused4;
+} Uart;
+
+#define UART ((volatile Uart * const) UART_BASE)
+
+typedef struct GpioControl {
+ uint32 GPIODir_high; /* bits 36:32 */
+ uint32 GPIODir; /* bits 31:00 */
+ uint32 GPIOio_high; /* bits 36:32 */
+ uint32 GPIOio; /* bits 31:00 */
+ uint32 LEDCtrl;
+#define LED3_STROBE 0x08000000
+#define LED2_STROBE 0x04000000
+#define LED1_STROBE 0x02000000
+#define LED0_STROBE 0x01000000
+#define LED_TEST 0x00010000
+#define LED3_DISABLE_LINK_ACT 0x00008000
+#define LED2_DISABLE_LINK_ACT 0x00004000
+#define LED1_DISABLE_LINK_ACT 0x00002000
+#define LED0_DISABLE_LINK_ACT 0x00001000
+#define LED_INTERVAL_SET_MASK 0x00000f00
+#define LED_INTERVAL_SET_320MS 0x00000500
+#define LED_INTERVAL_SET_160MS 0x00000400
+#define LED_INTERVAL_SET_80MS 0x00000300
+#define LED_INTERVAL_SET_40MS 0x00000200
+#define LED_INTERVAL_SET_20MS 0x00000100
+#define LED3_ON 0x00000080
+#define LED2_ON 0x00000040
+#define LED1_ON 0x00000020
+#define LED0_ON 0x00000010
+#define LED3_ENABLE 0x00000008
+#define LED2_ENABLE 0x00000004
+#define LED1_ENABLE 0x00000002
+#define LED0_ENABLE 0x00000001
+ uint32 SpiSlaveCfg;
+#define SPI_SLAVE_RESET 0x00010000
+#define SPI_RESTRICT 0x00000400
+#define SPI_DELAY_DISABLE 0x00000200
+#define SPI_PROBE_MUX_SEL_MASK 0x000001e0
+#define SPI_SER_ADDR_CFG_MASK 0x0000000c
+#define SPI_MODE 0x00000001
+ uint32 GPIOMode;
+#define GROUP4_DIAG 0x00090000
+#define GROUP4_UTOPIA 0x00080000
+#define GROUP4_LEGACY_LED 0x00030000
+#define GROUP4_MII_SNOOP 0x00020000
+#define GROUP4_EXT_EPHY 0x00010000
+#define GROUP3_DIAG 0x00009000
+#define GROUP3_UTOPIA 0x00008000
+#define GROUP3_EXT_MII 0x00007000
+#define GROUP2_DIAG 0x00000900
+#define GROUP2_PCI 0x00000500
+#define GROUP1_DIAG 0x00000090
+#define GROUP1_UTOPIA 0x00000080
+#define GROUP1_SPI_UART 0x00000060
+#define GROUP1_SPI_MASTER 0x00000060
+#define GROUP1_MII_PCCARD 0x00000040
+#define GROUP1_MII_SNOOP 0x00000020
+#define GROUP1_EXT_EPHY 0x00000010
+#define GROUP0_DIAG 0x00000009
+#define GROUP0_EXT_MII 0x00000007
+
+} GpioControl;
+
+#define GPIO ((volatile GpioControl * const) GPIO_BASE)
+
+/* Number to mask conversion macro used for GPIODir and GPIOio */
+#define GPIO_NUM_TOTAL_BITS_MASK 0x3f
+#define GPIO_NUM_MAX_BITS_MASK 0x1f
+#define GPIO_NUM_TO_MASK(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) < 32) ? (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) : (0) )
+
+/* Number to mask conversion macro used for GPIODir_high and GPIOio_high */
+#define GPIO_NUM_MAX_BITS_MASK_HIGH 0x07
+#define GPIO_NUM_TO_MASK_HIGH(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) >= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) )
+
+
+/*
+** External Bus Interface
+*/
+typedef struct EbiChipSelect {
+ uint32 base; /* base address in upper 24 bits */
+#define EBI_SIZE_8K 0
+#define EBI_SIZE_16K 1
+#define EBI_SIZE_32K 2
+#define EBI_SIZE_64K 3
+#define EBI_SIZE_128K 4
+#define EBI_SIZE_256K 5
+#define EBI_SIZE_512K 6
+#define EBI_SIZE_1M 7
+#define EBI_SIZE_2M 8
+#define EBI_SIZE_4M 9
+#define EBI_SIZE_8M 10
+#define EBI_SIZE_16M 11
+#define EBI_SIZE_32M 12
+#define EBI_SIZE_64M 13
+#define EBI_SIZE_128M 14
+#define EBI_SIZE_256M 15
+ uint32 config;
+#define EBI_ENABLE 0x00000001 /* .. enable this range */
+#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */
+#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */
+#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */
+#define EBI_WREN 0x00000020 /* enable posted writes */
+#define EBI_POLARITY 0x00000040 /* .. set to invert something,
+ ** don't know what yet */
+#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */
+#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */
+#define EBI_FIFO 0x00000200 /* .. use fifo */
+#define EBI_RE 0x00000400 /* .. Reverse Endian */
+} EbiChipSelect;
+
+typedef struct MpiRegisters {
+ EbiChipSelect cs[7]; /* size chip select configuration */
+#define EBI_CS0_BASE 0
+#define EBI_CS1_BASE 1
+#define EBI_CS2_BASE 2
+#define EBI_CS3_BASE 3
+#define PCMCIA_COMMON_BASE 4
+#define PCMCIA_ATTRIBUTE_BASE 5
+#define PCMCIA_IO_BASE 6
+ uint32 unused0[2]; /* reserved */
+ uint32 ebi_control; /* ebi control */
+ uint32 unused1[4]; /* reserved */
+#define EBI_ACCESS_TIMEOUT 0x000007FF
+ uint32 pcmcia_cntl1; /* pcmcia control 1 */
+#define PCCARD_CARD_RESET 0x00040000
+#define CARDBUS_ENABLE 0x00008000
+#define PCMCIA_ENABLE 0x00004000
+#define PCMCIA_GPIO_ENABLE 0x00002000
+#define CARDBUS_IDSEL 0x00001F00
+#define VS2_OEN 0x00000080
+#define VS1_OEN 0x00000040
+#define VS2_OUT 0x00000020
+#define VS1_OUT 0x00000010
+#define VS2_IN 0x00000008
+#define VS1_IN 0x00000004
+#define CD2_IN 0x00000002
+#define CD1_IN 0x00000001
+#define VS_MASK 0x0000000C
+#define CD_MASK 0x00000003
+ uint32 unused2; /* reserved */
+ uint32 pcmcia_cntl2; /* pcmcia control 2 */
+#define PCMCIA_BYTESWAP_DIS 0x00000002
+#define PCMCIA_HALFWORD_EN 0x00000001
+#define RW_ACTIVE_CNT_BIT 2
+#define INACTIVE_CNT_BIT 8
+#define CE_SETUP_CNT_BIT 16
+#define CE_HOLD_CNT_BIT 24
+ uint32 unused3[40]; /* reserved */
+
+ uint32 sp0range; /* PCI to internal system bus address space */
+ uint32 sp0remap;
+ uint32 sp0cfg;
+ uint32 sp1range;
+ uint32 sp1remap;
+ uint32 sp1cfg;
+
+ uint32 EndianCfg;
+
+ uint32 l2pcfgctl; /* internal system bus to PCI IO/Cfg control */
+#define DIR_CFG_SEL 0x80000000 /* change from PCI I/O access to PCI config access */
+#define DIR_CFG_USEREG 0x40000000 /* use this register info for PCI configuration access */
+#define DEVICE_NUMBER 0x00007C00 /* device number for the PCI configuration access */
+#define FUNC_NUMBER 0x00000300 /* function number for the PCI configuration access */
+#define REG_NUMBER 0x000000FC /* register number for the PCI configuration access */
+#define CONFIG_TYPE 0x00000003 /* configuration type for the PCI configuration access */
+
+ uint32 l2pmrange1; /* internal system bus to PCI memory space */
+#define PCI_SIZE_64K 0xFFFF0000
+#define PCI_SIZE_128K 0xFFFE0000
+#define PCI_SIZE_256K 0xFFFC0000
+#define PCI_SIZE_512K 0xFFF80000
+#define PCI_SIZE_1M 0xFFF00000
+#define PCI_SIZE_2M 0xFFE00000
+#define PCI_SIZE_4M 0xFFC00000
+#define PCI_SIZE_8M 0xFF800000
+#define PCI_SIZE_16M 0xFF000000
+#define PCI_SIZE_32M 0xFE000000
+ uint32 l2pmbase1; /* kseg0 or kseg1 address & 0x1FFFFFFF */
+ uint32 l2pmremap1;
+#define CARDBUS_MEM 0x00000004
+#define MEM_WINDOW_EN 0x00000001
+ uint32 l2pmrange2;
+ uint32 l2pmbase2;
+ uint32 l2pmremap2;
+ uint32 l2piorange; /* internal system bus to PCI I/O space */
+ uint32 l2piobase;
+ uint32 l2pioremap;
+
+ uint32 pcimodesel;
+#define PCI2_INT_BUS_RD_PREFECH 0x000000F0
+#define PCI_BAR2_NOSWAP 0x00000002 /* BAR at offset 0x20 */
+#define PCI_BAR1_NOSWAP 0x00000001 /* BAR at affset 0x1c */
+
+ uint32 pciintstat; /* PCI interrupt mask/status */
+#define MAILBOX1_SENT 0x08
+#define MAILBOX0_SENT 0x04
+#define MAILBOX1_MSG_RCV 0x02
+#define MAILBOX0_MSG_RCV 0x01
+ uint32 locbuscntrl; /* internal system bus control */
+#define DIR_U2P_NOSWAP 0x00000002
+#define EN_PCI_GPIO 0x00000001
+ uint32 locintstat; /* internal system bus interrupt mask/status */
+#define CSERR 0x0200
+#define SERR 0x0100
+#define EXT_PCI_INT 0x0080
+#define DIR_FAILED 0x0040
+#define DIR_COMPLETE 0x0020
+#define PCI_CFG 0x0010
+ uint32 unused5[7];
+
+ uint32 mailbox0;
+ uint32 mailbox1;
+
+ uint32 pcicfgcntrl; /* internal system bus PCI configuration control */
+#define PCI_CFG_REG_WRITE_EN 0x00000080
+#define PCI_CFG_ADDR 0x0000003C
+ uint32 pcicfgdata; /* internal system bus PCI configuration data */
+
+ uint32 locch2ctl; /* PCI to interrnal system bus DMA (downstream) local control */
+#define MPI_DMA_HALT 0x00000008 /* idle after finish current memory burst */
+#define MPI_DMA_PKT_HALT 0x00000004 /* idle after an EOP flag is detected */
+#define MPI_DMA_STALL 0x00000002 /* idle after an EOP flag is detected */
+#define MPI_DMA_ENABLE 0x00000001 /* set to enable channel */
+ uint32 locch2intStat;
+#define MPI_DMA_NO_DESC 0x00000004 /* no valid descriptors */
+#define MPI_DMA_DONE 0x00000002 /* packet xfer complete */
+#define MPI_DMA_BUFF_DONE 0x00000001 /* buffer done */
+ uint32 locch2intMask;
+ uint32 unused6;
+ uint32 locch2descaddr;
+ uint32 locch2status1;
+#define LOCAL_DESC_STATE 0xE0000000
+#define PCI_DESC_STATE 0x1C000000
+#define BYTE_DONE 0x03FFC000
+#define RING_ADDR 0x00003FFF
+ uint32 locch2status2;
+#define BUFPTR_OFFSET 0x1FFF0000
+#define PCI_MASTER_STATE 0x000000C0
+#define LOC_MASTER_STATE 0x00000038
+#define CONTROL_STATE 0x00000007
+ uint32 unused7;
+
+ uint32 locch1Ctl; /*internal system bus to PCI DMA (upstream) local control */
+#define DMA_U2P_LE 0x00000200 /* local bus is little endian */
+#define DMA_U2P_NOSWAP 0x00000100 /* lccal bus is little endian but no data swapped */
+ uint32 locch1intstat;
+ uint32 locch1intmask;
+ uint32 unused8;
+ uint32 locch1descaddr;
+ uint32 locch1status1;
+ uint32 locch1status2;
+ uint32 unused9;
+
+ uint32 pcich1ctl; /* internal system bus to PCI DMA PCI control */
+ uint32 pcich1intstat;
+ uint32 pcich1intmask;
+ uint32 pcich1descaddr;
+ uint32 pcich1status1;
+ uint32 pcich1status2;
+
+ uint32 pcich2Ctl; /* PCI to internal system bus DMA PCI control */
+ uint32 pcich2intstat;
+ uint32 pcich2intmask;
+ uint32 pcich2descaddr;
+ uint32 pcich2status1;
+ uint32 pcich2status2;
+
+ uint32 perm_id; /* permanent device and vendor id */
+ uint32 perm_rev; /* permanent revision id */
+} MpiRegisters;
+
+#define MPI ((volatile MpiRegisters * const) MPI_BASE)
+
+/* PCI configuration address space start offset 0x40 */
+#define BRCM_PCI_CONFIG_TIMER 0x40
+#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK 0x0000FF00
+#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK 0x000000FF
+
+/* USB host non-Open HCI register, USB_HOST_NON_OHCI, bit definitions. */
+#define NON_OHCI_ENABLE_PORT1 0x00000001 /* Use USB port 1 for host, not dev */
+#define NON_OHCI_BYTE_SWAP 0x00000008 /* Swap USB host registers */
+
+#define USBH_NON_OHCI ((volatile unsigned long * const) USB_HOST_NON_OHCI)
+
+#endif
+
diff -urN linux-2.6.19/arch/mips/bcm963xx/include/bcmTag.h linux-2.6.19.new/arch/mips/bcm963xx/include/bcmTag.h
--- linux-2.6.19/arch/mips/bcm963xx/include/bcmTag.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/include/bcmTag.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,153 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+//**************************************************************************************
+// File Name : bcmTag.h
+//
+// Description: add tag with validation system to the firmware image file to be uploaded
+// via http
+//
+// Created : 02/28/2002 seanl
+//**************************************************************************************
+
+#ifndef _BCMTAG_H_
+#define _BCMTAG_H_
+
+
+#define BCM_SIG_1 "Broadcom Corporation"
+#define BCM_SIG_2 "ver. 2.0" // was "firmware version 2.0" now it is split 6 char out for chip id.
+
+#define BCM_TAG_VER "6"
+#define BCM_TAG_VER_LAST "26"
+
+// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars
+#define TAG_LEN 256
+#define TAG_VER_LEN 4
+#define SIG_LEN 20
+#define SIG_LEN_2 14 // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID
+#define CHIP_ID_LEN 6
+#define IMAGE_LEN 10
+#define ADDRESS_LEN 12
+#define FLAG_LEN 2
+#define TOKEN_LEN 20
+#define BOARD_ID_LEN 16
+#define RESERVED_LEN (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \
+ (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN))
+
+
+// TAG for downloadable image (kernel plus file system)
+typedef struct _FILE_TAG
+{
+ unsigned char tagVersion[TAG_VER_LEN]; // tag version. Will be 2 here.
+ unsigned char signiture_1[SIG_LEN]; // text line for company info
+ unsigned char signiture_2[SIG_LEN_2]; // additional info (can be version number)
+ unsigned char chipId[CHIP_ID_LEN]; // chip id
+ unsigned char boardId[BOARD_ID_LEN]; // board id
+ unsigned char bigEndian[FLAG_LEN]; // if = 1 - big, = 0 - little endia of the host
+ unsigned char totalImageLen[IMAGE_LEN]; // the sum of all the following length
+ unsigned char cfeAddress[ADDRESS_LEN]; // if non zero, cfe starting address
+ unsigned char cfeLen[IMAGE_LEN]; // if non zero, cfe size in clear ASCII text.
+ unsigned char rootfsAddress[ADDRESS_LEN]; // if non zero, filesystem starting address
+ unsigned char rootfsLen[IMAGE_LEN]; // if non zero, filesystem size in clear ASCII text.
+ unsigned char kernelAddress[ADDRESS_LEN]; // if non zero, kernel starting address
+ unsigned char kernelLen[IMAGE_LEN]; // if non zero, kernel size in clear ASCII text.
+ unsigned char dualImage[FLAG_LEN]; // if 1, dual image
+ unsigned char inactiveLen[FLAG_LEN]; // if 1, the image is INACTIVE; if 0, active
+ unsigned char reserved[RESERVED_LEN]; // reserved for later use
+ unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha; for
+ // now will be 4 unsigned char crc
+ unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken)
+} FILE_TAG, *PFILE_TAG;
+
+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
+#define CRC_LEN 4
+
+// only included if for bcmTag.exe program
+#ifdef BCMTAG_EXE_USE
+
+static unsigned long Crc32_table[256] = {
+ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
+ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
+ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
+ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
+ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
+ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
+ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
+ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
+ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
+ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
+ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
+ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
+ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
+ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
+ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
+ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
+ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
+ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
+ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
+ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
+ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
+ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
+ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
+ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
+ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
+ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
+ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
+ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
+ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
+ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
+ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
+ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
+ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
+ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
+ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
+ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
+ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
+ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
+ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
+ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
+ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
+ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
+ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
+ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
+ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
+ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
+ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
+ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
+ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
+ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
+ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
+ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
+ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
+ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
+ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
+ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
+ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
+ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
+ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
+ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
+ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
+ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
+ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
+ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
+};
+#endif // BCMTAG_USE
+
+
+#endif // _BCMTAG_H_
+
diff -urN linux-2.6.19/arch/mips/bcm963xx/include/bcm_intr.h linux-2.6.19.new/arch/mips/bcm963xx/include/bcm_intr.h
--- linux-2.6.19/arch/mips/bcm963xx/include/bcm_intr.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/include/bcm_intr.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,59 @@
+/*
+<:copyright-gpl
+ Copyright 2003 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __BCM_INTR_H
+#define __BCM_INTR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(CONFIG_BCM96338)
+#include <6338_intr.h>
+#endif
+#if defined(CONFIG_BCM96345)
+#include <6345_intr.h>
+#endif
+#if defined(CONFIG_BCM96348)
+#include <6348_intr.h>
+#endif
+
+/* defines */
+struct pt_regs;
+typedef int (*FN_HANDLER) (int, void *);
+
+/* prototypes */
+extern void enable_brcm_irq(unsigned int irq);
+extern void disable_brcm_irq(unsigned int irq);
+extern int request_external_irq(unsigned int irq,
+ FN_HANDLER handler, unsigned long irqflags,
+ const char * devname, void *dev_id);
+extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param,
+ unsigned int interruptId);
+extern void dump_intr_regs(void);
+
+/* compatibility definitions */
+#define BcmHalInterruptEnable(irq) enable_brcm_irq( irq )
+#define BcmHalInterruptDisable(irq) disable_brcm_irq( irq )
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif
diff -urN linux-2.6.19/arch/mips/bcm963xx/include/bcm_map_part.h linux-2.6.19.new/arch/mips/bcm963xx/include/bcm_map_part.h
--- linux-2.6.19/arch/mips/bcm963xx/include/bcm_map_part.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/include/bcm_map_part.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,34 @@
+/*
+<:copyright-gpl
+ Copyright 2004 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __BCM_MAP_PART_H
+#define __BCM_MAP_PART_H
+
+#if defined(CONFIG_BCM96338)
+#include <6338_map_part.h>
+#endif
+#if defined(CONFIG_BCM96345)
+#include <6345_map_part.h>
+#endif
+#if defined(CONFIG_BCM96348)
+#include <6348_map_part.h>
+#endif
+
+#endif
+
diff -urN linux-2.6.19/arch/mips/bcm963xx/include/bcmpci.h linux-2.6.19.new/arch/mips/bcm963xx/include/bcmpci.h
--- linux-2.6.19/arch/mips/bcm963xx/include/bcmpci.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/include/bcmpci.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,87 @@
+/*
+<:copyright-gpl
+ Copyright 2004 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+//
+// bcmpci.h - bcm96348 PCI, Cardbus, and PCMCIA definition
+//
+#ifndef BCMPCI_H
+#define BCMPCI_H
+
+/* Memory window in internal system bus address space */
+#define BCM_PCI_MEM_BASE 0x08000000
+/* IO window in internal system bus address space */
+#define BCM_PCI_IO_BASE 0x0C000000
+
+#define BCM_PCI_ADDR_MASK 0x1fffffff
+
+/* Memory window size (range) */
+#define BCM_PCI_MEM_SIZE_16MB 0x01000000
+/* IO window size (range) */
+#define BCM_PCI_IO_SIZE_64KB 0x00010000
+
+/* PCI Configuration and I/O space acesss */
+#define BCM_PCI_CFG(d, f, o) ( (d << 11) | (f << 8) | (o/4 << 2) )
+
+/* fake USB PCI slot */
+#define USB_HOST_SLOT 9
+#define USB_BAR0_MEM_SIZE 0x0800
+
+#define BCM_HOST_MEM_SPACE1 0x10000000
+#define BCM_HOST_MEM_SPACE2 0x00000000
+
+/*
+ * EBI bus clock is 33MHz and share with PCI bus
+ * each clock cycle is 30ns.
+ */
+/* attribute memory access wait cnt for 4306 */
+#define PCMCIA_ATTR_CE_HOLD 3 // data hold time 70ns
+#define PCMCIA_ATTR_CE_SETUP 3 // data setup time 50ns
+#define PCMCIA_ATTR_INACTIVE 6 // time between read/write cycles 180ns. For the total cycle time 600ns (cnt1+cnt2+cnt3+cnt4)
+#define PCMCIA_ATTR_ACTIVE 10 // OE/WE pulse width 300ns
+
+/* common memory access wait cnt for 4306 */
+#define PCMCIA_MEM_CE_HOLD 1 // data hold time 30ns
+#define PCMCIA_MEM_CE_SETUP 1 // data setup time 30ns
+#define PCMCIA_MEM_INACTIVE 2 // time between read/write cycles 40ns. For the total cycle time 250ns (cnt1+cnt2+cnt3+cnt4)
+#define PCMCIA_MEM_ACTIVE 5 // OE/WE pulse width 150ns
+
+#define PCCARD_VCC_MASK 0x00070000 // Mask Reset also
+#define PCCARD_VCC_33V 0x00010000
+#define PCCARD_VCC_50V 0x00020000
+
+typedef enum {
+ MPI_CARDTYPE_NONE, // No Card in slot
+ MPI_CARDTYPE_PCMCIA, // 16-bit PCMCIA card in slot
+ MPI_CARDTYPE_CARDBUS, // 32-bit CardBus card in slot
+} CardType;
+
+#define CARDBUS_SLOT 0 // Slot 0 is default for CardBus
+
+#define pcmciaAttrOffset 0x00200000
+#define pcmciaMemOffset 0x00000000
+// Needs to be right above PCI I/O space. Give 0x8000 (32K) to PCMCIA.
+#define pcmciaIoOffset (BCM_PCI_IO_BASE + 0x80000)
+// Base Address is that mapped into the MPI ChipSelect registers.
+// UBUS bridge MemoryWindow 0 outputs a 0x00 for the base.
+#define pcmciaBase 0xbf000000
+#define pcmciaAttr (pcmciaAttrOffset | pcmciaBase)
+#define pcmciaMem (pcmciaMemOffset | pcmciaBase)
+#define pcmciaIo (pcmciaIoOffset | pcmciaBase)
+
+#endif
diff -urN linux-2.6.19/arch/mips/bcm963xx/include/bcmtypes.h linux-2.6.19.new/arch/mips/bcm963xx/include/bcmtypes.h
--- linux-2.6.19/arch/mips/bcm963xx/include/bcmtypes.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/include/bcmtypes.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,160 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+//
+// bcmtypes.h - misc useful typedefs
+//
+#ifndef BCMTYPES_H
+#define BCMTYPES_H
+
+// These are also defined in typedefs.h in the application area, so I need to
+// protect against re-definition.
+
+#ifndef _TYPEDEFS_H_
+typedef unsigned char uint8;
+typedef unsigned short uint16;
+typedef unsigned long uint32;
+typedef signed char int8;
+typedef signed short int16;
+typedef signed long int32;
+#endif
+
+typedef unsigned char byte;
+// typedef unsigned long sem_t;
+
+typedef unsigned long HANDLE,*PULONG,DWORD,*PDWORD;
+typedef signed long LONG,*PLONG;
+
+typedef unsigned int *PUINT;
+typedef signed int INT;
+
+typedef unsigned short *PUSHORT;
+typedef signed short SHORT,*PSHORT;
+typedef unsigned short WORD,*PWORD;
+
+typedef unsigned char *PUCHAR;
+typedef signed char *PCHAR;
+
+typedef void *PVOID;
+
+typedef unsigned char BOOLEAN, *PBOOL, *PBOOLEAN;
+
+typedef unsigned char BYTE,*PBYTE;
+
+//#ifndef __GNUC__
+//The following has been defined in Vxworks internally: vxTypesOld.h
+//redefine under vxworks will cause error
+typedef signed int *PINT;
+
+typedef signed char INT8;
+typedef signed short INT16;
+typedef signed long INT32;
+
+typedef unsigned char UINT8;
+typedef unsigned short UINT16;
+typedef unsigned long UINT32;
+
+typedef unsigned char UCHAR;
+typedef unsigned short USHORT;
+typedef unsigned int UINT;
+typedef unsigned long ULONG;
+
+typedef void VOID;
+typedef unsigned char BOOL;
+
+//#endif /* __GNUC__ */
+
+
+// These are also defined in typedefs.h in the application area, so I need to
+// protect against re-definition.
+#ifndef TYPEDEFS_H
+
+// Maximum and minimum values for a signed 16 bit integer.
+#define MAX_INT16 32767
+#define MIN_INT16 -32768
+
+// Useful for true/false return values. This uses the
+// Taligent notation (k for constant).
+typedef enum
+{
+ kFalse = 0,
+ kTrue = 1
+} Bool;
+
+#endif
+
+/* macros to protect against unaligned accesses */
+
+#if 0
+/* first arg is an address, second is a value */
+#define PUT16( a, d ) { \
+ *((byte *)a) = (byte)((d)>>8); \
+ *(((byte *)a)+1) = (byte)(d); \
+}
+
+#define PUT32( a, d ) { \
+ *((byte *)a) = (byte)((d)>>24); \
+ *(((byte *)a)+1) = (byte)((d)>>16); \
+ *(((byte *)a)+2) = (byte)((d)>>8); \
+ *(((byte *)a)+3) = (byte)(d); \
+}
+
+/* first arg is an address, returns a value */
+#define GET16( a ) ( \
+ (*((byte *)a) << 8) | \
+ (*(((byte *)a)+1)) \
+)
+
+#define GET32( a ) ( \
+ (*((byte *)a) << 24) | \
+ (*(((byte *)a)+1) << 16) | \
+ (*(((byte *)a)+2) << 8) | \
+ (*(((byte *)a)+3)) \
+)
+#endif
+
+#ifndef YES
+#define YES 1
+#endif
+
+#ifndef NO
+#define NO 0
+#endif
+
+#ifndef IN
+#define IN
+#endif
+
+#ifndef OUT
+#define OUT
+#endif
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#define READ32(addr) (*(volatile UINT32 *)((ULONG)&addr))
+#define READ16(addr) (*(volatile UINT16 *)((ULONG)&addr))
+#define READ8(addr) (*(volatile UINT8 *)((ULONG)&addr))
+
+#endif
diff -urN linux-2.6.19/arch/mips/bcm963xx/include/board.h linux-2.6.19.new/arch/mips/bcm963xx/include/board.h
--- linux-2.6.19/arch/mips/bcm963xx/include/board.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/include/board.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,373 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+/***********************************************************************/
+/* */
+/* MODULE: board.h */
+/* DATE: 97/02/18 */
+/* PURPOSE: Board specific information. This module should include */
+/* all base device addresses and board specific macros. */
+/* */
+/***********************************************************************/
+#ifndef _BOARD_H
+#define _BOARD_H
+
+/*****************************************************************************/
+/* Misc board definitions */
+/*****************************************************************************/
+
+#define DYING_GASP_API
+
+/*****************************************************************************/
+/* Physical Memory Map */
+/*****************************************************************************/
+
+#define PHYS_DRAM_BASE 0x00000000 /* Dynamic RAM Base */
+#define PHYS_FLASH_BASE 0x1FC00000 /* Flash Memory */
+
+/*****************************************************************************/
+/* Note that the addresses above are physical addresses and that programs */
+/* have to use converted addresses defined below: */
+/*****************************************************************************/
+#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */
+#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */
+#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */
+
+/*****************************************************************************/
+/* Select the PLL value to get the desired CPU clock frequency. */
+/* */
+/* */
+/*****************************************************************************/
+#define FPERIPH 50000000
+
+#define ONEK 1024
+#define BLK64K (64*ONEK)
+#define FLASH45_BLKS_BOOT_ROM 1
+#define FLASH45_LENGTH_BOOT_ROM (FLASH45_BLKS_BOOT_ROM * BLK64K)
+#define FLASH_RESERVED_AT_END (64*ONEK) /*reserved for PSI, scratch pad*/
+
+/*****************************************************************************/
+/* Note that the addresses above are physical addresses and that programs */
+/* have to use converted addresses defined below: */
+/*****************************************************************************/
+#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */
+#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */
+#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */
+
+/*****************************************************************************/
+/* Select the PLL value to get the desired CPU clock frequency. */
+/* */
+/* */
+/*****************************************************************************/
+#define FPERIPH 50000000
+
+#define SDRAM_TYPE_ADDRESS_OFFSET 16
+#define NVRAM_DATA_OFFSET 0x0580
+#define NVRAM_DATA_ID 0x0f1e2d3c
+#define BOARD_SDRAM_TYPE *(unsigned long *) \
+ (FLASH_BASE + SDRAM_TYPE_ADDRESS_OFFSET)
+
+#define ONEK 1024
+#define BLK64K (64*ONEK)
+
+// nvram and psi flash definitions for 45
+#define FLASH45_LENGTH_NVRAM ONEK // 1k nvram
+#define NVRAM_PSI_DEFAULT 24 // default psi in K byes
+
+/*****************************************************************************/
+/* NVRAM Offset and definition */
+/*****************************************************************************/
+
+#define NVRAM_VERSION_NUMBER 2
+#define NVRAM_VERSION_NUMBER_ADDRESS 0
+
+#define NVRAM_BOOTLINE_LEN 256
+#define NVRAM_BOARD_ID_STRING_LEN 16
+#define NVRAM_MAC_ADDRESS_LEN 6
+#define NVRAM_MAC_COUNT_MAX 32
+
+/*****************************************************************************/
+/* Misc Offsets */
+/*****************************************************************************/
+
+#define CFE_VERSION_OFFSET 0x0570
+#define CFE_VERSION_MARK_SIZE 5
+#define CFE_VERSION_SIZE 5
+
+typedef struct
+{
+ unsigned long ulVersion;
+ char szBootline[NVRAM_BOOTLINE_LEN];
+ char szBoardId[NVRAM_BOARD_ID_STRING_LEN];
+ unsigned long ulReserved1[2];
+ unsigned long ulNumMacAddrs;
+ unsigned char ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN];
+ char chReserved[2];
+ unsigned long ulCheckSum;
+} NVRAM_DATA, *PNVRAM_DATA;
+
+
+/*****************************************************************************/
+/* board ioctl calls for flash, led and some other utilities */
+/*****************************************************************************/
+
+
+/* Defines. for board driver */
+#define BOARD_IOCTL_MAGIC 'B'
+#define BOARD_DRV_MAJOR 206
+
+#define MAC_ADDRESS_ANY (unsigned long) -1
+
+#define BOARD_IOCTL_FLASH_INIT \
+ _IOWR(BOARD_IOCTL_MAGIC, 0, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_FLASH_WRITE \
+ _IOWR(BOARD_IOCTL_MAGIC, 1, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_FLASH_READ \
+ _IOWR(BOARD_IOCTL_MAGIC, 2, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_NR_PAGES \
+ _IOWR(BOARD_IOCTL_MAGIC, 3, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_DUMP_ADDR \
+ _IOWR(BOARD_IOCTL_MAGIC, 4, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_SET_MEMORY \
+ _IOWR(BOARD_IOCTL_MAGIC, 5, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_MIPS_SOFT_RESET \
+ _IOWR(BOARD_IOCTL_MAGIC, 6, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_LED_CTRL \
+ _IOWR(BOARD_IOCTL_MAGIC, 7, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_ID \
+ _IOWR(BOARD_IOCTL_MAGIC, 8, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_MAC_ADDRESS \
+ _IOWR(BOARD_IOCTL_MAGIC, 9, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_RELEASE_MAC_ADDRESS \
+ _IOWR(BOARD_IOCTL_MAGIC, 10, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_PSI_SIZE \
+ _IOWR(BOARD_IOCTL_MAGIC, 11, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_SDRAM_SIZE \
+ _IOWR(BOARD_IOCTL_MAGIC, 12, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_SET_MONITOR_FD \
+ _IOWR(BOARD_IOCTL_MAGIC, 13, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_WAKEUP_MONITOR_TASK \
+ _IOWR(BOARD_IOCTL_MAGIC, 14, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_BOOTLINE \
+ _IOWR(BOARD_IOCTL_MAGIC, 15, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_SET_BOOTLINE \
+ _IOWR(BOARD_IOCTL_MAGIC, 16, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_BASE_MAC_ADDRESS \
+ _IOWR(BOARD_IOCTL_MAGIC, 17, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_CHIP_ID \
+ _IOWR(BOARD_IOCTL_MAGIC, 18, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_NUM_ENET \
+ _IOWR(BOARD_IOCTL_MAGIC, 19, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_CFE_VER \
+ _IOWR(BOARD_IOCTL_MAGIC, 20, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_ENET_CFG \
+ _IOWR(BOARD_IOCTL_MAGIC, 21, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_WLAN_ANT_INUSE \
+ _IOWR(BOARD_IOCTL_MAGIC, 22, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_SET_TRIGGER_EVENT \
+ _IOWR(BOARD_IOCTL_MAGIC, 23, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_TRIGGER_EVENT \
+ _IOWR(BOARD_IOCTL_MAGIC, 24, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_UNSET_TRIGGER_EVENT \
+ _IOWR(BOARD_IOCTL_MAGIC, 25, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_SET_SES_LED \
+ _IOWR(BOARD_IOCTL_MAGIC, 26, BOARD_IOCTL_PARMS)
+
+//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12
+#define RESET_BUTTON_UP 1
+#define RESET_BUTTON_PRESSDOWN 0
+#define BOARD_IOCTL_GET_RESETHOLD \
+ _IOWR(BOARD_IOCTL_MAGIC, 27, BOARD_IOCTL_PARMS)
+//>>JUNHON, 2004/09/15
+
+// for the action in BOARD_IOCTL_PARMS for flash operation
+typedef enum
+{
+ PERSISTENT,
+ NVRAM,
+ BCM_IMAGE_CFE,
+ BCM_IMAGE_FS,
+ BCM_IMAGE_KERNEL,
+ BCM_IMAGE_WHOLE,
+ SCRATCH_PAD,
+ FLASH_SIZE,
+} BOARD_IOCTL_ACTION;
+
+
+typedef struct boardIoctParms
+{
+ char *string;
+ char *buf;
+ int strLen;
+ int offset;
+ BOARD_IOCTL_ACTION action; /* flash read/write: nvram, persistent, bcm image */
+ int result;
+} BOARD_IOCTL_PARMS;
+
+
+// LED defines
+typedef enum
+{
+ kLedAdsl,
+ kLedWireless,
+ kLedUsb,
+ kLedHpna,
+ kLedWanData,
+ kLedPPP,
+ kLedVoip,
+ kLedSes,
+ kLedLan,
+ kLedSelfTest,
+ kLedEnd, // NOTE: Insert the new led name before this one. Alway stay at the end.
+} BOARD_LED_NAME;
+
+typedef enum
+{
+ kLedStateOff, /* turn led off */
+ kLedStateOn, /* turn led on */
+ kLedStateFail, /* turn led on red */
+ kLedStateBlinkOnce, /* blink once, ~100ms and ignore the same call during the 100ms period */
+ kLedStateSlowBlinkContinues, /* slow blink continues at ~600ms interval */
+ kLedStateFastBlinkContinues, /* fast blink continues at ~200ms interval */
+} BOARD_LED_STATE;
+
+
+// virtual and physical map pair defined in board.c
+typedef struct ledmappair
+{
+ BOARD_LED_NAME ledName; // virtual led name
+ BOARD_LED_STATE ledInitState; // initial led state when the board boots.
+ unsigned short ledMask; // physical GPIO pin mask
+ unsigned short ledActiveLow; // reset bit to turn on LED
+ unsigned short ledMaskFail; // physical GPIO pin mask for state failure
+ unsigned short ledActiveLowFail;// reset bit to turn on LED
+} LED_MAP_PAIR, *PLED_MAP_PAIR;
+
+typedef void (*HANDLE_LED_FUNC)(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState);
+
+/* Flash storage address information that is determined by the flash driver. */
+typedef struct flashaddrinfo
+{
+ int flash_persistent_start_blk;
+ int flash_persistent_number_blk;
+ int flash_persistent_length;
+ unsigned long flash_persistent_blk_offset;
+ int flash_scratch_pad_start_blk; // start before psi (SP_BUF_LEN)
+ int flash_scratch_pad_number_blk;
+ int flash_scratch_pad_length;
+ unsigned long flash_scratch_pad_blk_offset;
+ int flash_nvram_start_blk;
+ int flash_nvram_number_blk;
+ int flash_nvram_length;
+ unsigned long flash_nvram_blk_offset;
+} FLASH_ADDR_INFO, *PFLASH_ADDR_INFO;
+
+// scratch pad defines
+/* SP - Persisten Scratch Pad format:
+ sp header : 32 bytes
+ tokenId-1 : 8 bytes
+ tokenId-1 len : 4 bytes
+ tokenId-1 data
+ ....
+ tokenId-n : 8 bytes
+ tokenId-n len : 4 bytes
+ tokenId-n data
+*/
+
+#define MAGIC_NUM_LEN 8
+#define MAGIC_NUMBER "gOGoBrCm"
+#define TOKEN_NAME_LEN 16
+#define SP_VERSION 1
+#define SP_MAX_LEN 8 * 1024 // 8k buf before psi
+#define SP_RESERVERD 16
+
+typedef struct _SP_HEADER
+{
+ char SPMagicNum[MAGIC_NUM_LEN]; // 8 bytes of magic number
+ int SPVersion; // version number
+ int SPUsedLen; // used sp len
+ char SPReserved[SP_RESERVERD]; // reservied, total 32 bytes
+} SP_HEADER, *PSP_HEADER;
+
+typedef struct _TOKEN_DEF
+{
+ char tokenName[TOKEN_NAME_LEN];
+ int tokenLen;
+} SP_TOKEN, *PSP_TOKEN;
+
+
+/*****************************************************************************/
+/* Function Prototypes */
+/*****************************************************************************/
+#if !defined(__ASM_ASM_H)
+void dumpaddr( unsigned char *pAddr, int nLen );
+
+int kerSysNvRamGet(char *string, int strLen, int offset);
+int kerSysNvRamSet(char *string, int strLen, int offset);
+int kerSysPersistentGet(char *string, int strLen, int offset);
+int kerSysPersistentSet(char *string, int strLen, int offset);
+int kerSysScratchPadGet(char *tokName, char *tokBuf, int tokLen);
+int kerSysScratchPadSet(char *tokName, char *tokBuf, int tokLen);
+int kerSysBcmImageSet( int flash_start_addr, char *string, int size);
+int kerSysGetMacAddress( unsigned char *pucaAddr, unsigned long ulId );
+int kerSysReleaseMacAddress( unsigned char *pucaAddr );
+int kerSysGetSdramSize( void );
+void kerSysGetBootline(char *string, int strLen);
+void kerSysSetBootline(char *string, int strLen);
+void kerSysMipsSoftReset(void);
+void kerSysLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE);
+void kerSysLedRegisterHwHandler( BOARD_LED_NAME, HANDLE_LED_FUNC, int );
+int kerSysFlashSizeGet(void);
+void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context);
+void kerSysDeregisterDyingGaspHandler(char *devname);
+void kerSysWakeupMonitorTask( void );
+#endif
+
+#define BOOT_CFE 0
+#define BOOT_REDBOOT 1
+
+extern int boot_loader_type;
+
+#endif /* _BOARD_H */
+
diff -urN linux-2.6.19/arch/mips/bcm963xx/int-handler.S linux-2.6.19.new/arch/mips/bcm963xx/int-handler.S
--- linux-2.6.19/arch/mips/bcm963xx/int-handler.S 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/int-handler.S 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,59 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+/*
+ * Generic interrupt handler for Broadcom MIPS boards
+ */
+
+#include <linux/autoconf.h>
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/*
+ * MIPS IRQ Source
+ * -------- ------
+ * 0 Software (ignored)
+ * 1 Software (ignored)
+ * 2 Combined hardware interrupt (hw0)
+ * 3 Hardware
+ * 4 Hardware
+ * 5 Hardware
+ * 6 Hardware
+ * 7 R4k timer
+ */
+
+ .text
+ .set noreorder
+ .set noat
+ .align 5
+ NESTED(brcmIRQ, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set noreorder
+ .set at
+
+ jal plat_irq_dispatch
+ move a0, sp
+
+ j ret_from_irq
+ nop
+
+ END(brcmIRQ)
diff -urN linux-2.6.19/arch/mips/bcm963xx/irq.c linux-2.6.19.new/arch/mips/bcm963xx/irq.c
--- linux-2.6.19/arch/mips/bcm963xx/irq.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/irq.c 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,256 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+/*
+ * Interrupt control functions for Broadcom 963xx MIPS boards
+ */
+
+#include <asm/atomic.h>
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/signal.h>
+#include <bcm_map_part.h>
+#include <bcm_intr.h>
+
+static void irq_dispatch_int(struct pt_regs *regs)
+{
+ unsigned int pendingIrqs;
+ static unsigned int irqBit;
+ static unsigned int isrNumber = 31;
+
+ pendingIrqs = PERF->IrqStatus & PERF->IrqMask;
+ if (!pendingIrqs) {
+ return;
+ }
+
+ while (1) {
+ irqBit <<= 1;
+ isrNumber++;
+ if (isrNumber == 32) {
+ isrNumber = 0;
+ irqBit = 0x1;
+ }
+ if (pendingIrqs & irqBit) {
+ PERF->IrqMask &= ~irqBit; // mask
+ do_IRQ(isrNumber + INTERNAL_ISR_TABLE_OFFSET);
+ break;
+ }
+ }
+}
+
+static void irq_dispatch_ext(uint32 irq)
+{
+ if (!(PERF->ExtIrqCfg & (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)))) {
+ printk("**** Ext IRQ mask. Should not dispatch ****\n");
+ }
+ /* disable and clear interrupt in the controller */
+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT));
+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT));
+ do_IRQ(irq);
+}
+
+
+extern void brcm_timer_interrupt(struct pt_regs *regs);
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+ u32 cause;
+ while((cause = (read_c0_cause()& CAUSEF_IP))) {
+ if (cause & CAUSEF_IP7)
+ brcm_timer_interrupt(regs);
+ else if (cause & CAUSEF_IP2)
+ irq_dispatch_int(regs);
+ else if (cause & CAUSEF_IP3)
+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_0);
+ else if (cause & CAUSEF_IP4)
+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_1);
+ else if (cause & CAUSEF_IP5)
+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_2);
+ else if (cause & CAUSEF_IP6)
+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_3);
+ local_irq_disable();
+ }
+}
+
+
+void enable_brcm_irq(unsigned int irq)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if( irq >= INTERNAL_ISR_TABLE_OFFSET ) {
+ PERF->IrqMask |= (1 << (irq - INTERNAL_ISR_TABLE_OFFSET));
+ }
+ else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) {
+ /* enable and clear interrupt in the controller */
+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT));
+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT));
+ }
+ local_irq_restore(flags);
+}
+
+void disable_brcm_irq(unsigned int irq)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if( irq >= INTERNAL_ISR_TABLE_OFFSET ) {
+ PERF->IrqMask &= ~(1 << (irq - INTERNAL_ISR_TABLE_OFFSET));
+ }
+ else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) {
+ /* disable interrupt in the controller */
+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT));
+ }
+ local_irq_restore(flags);
+}
+
+void ack_brcm_irq(unsigned int irq)
+{
+ /* Already done in brcm_irq_dispatch */
+}
+
+unsigned int startup_brcm_irq(unsigned int irq)
+{
+ enable_brcm_irq(irq);
+
+ return 0; /* never anything pending */
+}
+
+unsigned int startup_brcm_none(unsigned int irq)
+{
+ return 0;
+}
+
+void end_brcm_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+ enable_brcm_irq(irq);
+}
+
+void end_brcm_none(unsigned int irq)
+{
+}
+
+static struct hw_interrupt_type brcm_irq_type = {
+ .typename = "MIPS",
+ .startup = startup_brcm_irq,
+ .shutdown = disable_brcm_irq,
+ .enable = enable_brcm_irq,
+ .disable = disable_brcm_irq,
+ .ack = ack_brcm_irq,
+ .end = end_brcm_irq,
+ .set_affinity = NULL
+};
+
+static struct hw_interrupt_type brcm_irq_no_end_type = {
+ .typename = "MIPS",
+ .startup = startup_brcm_none,
+ .shutdown = disable_brcm_irq,
+ .enable = enable_brcm_irq,
+ .disable = disable_brcm_irq,
+ .ack = ack_brcm_irq,
+ .end = end_brcm_none,
+ .set_affinity = NULL
+};
+
+void __init arch_init_irq(void)
+{
+ int i;
+
+ clear_c0_status(ST0_BEV);
+ change_c0_status(ST0_IM, (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4));
+
+ for (i = 0; i < NR_IRQS; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = 0;
+ irq_desc[i].depth = 1;
+ irq_desc[i].chip = &brcm_irq_type;
+ }
+}
+
+int request_external_irq(unsigned int irq,
+ FN_HANDLER handler,
+ unsigned long irqflags,
+ const char * devname,
+ void *dev_id)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); // Clear
+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); // Mask
+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_INSENS_SHFT)); // Edge insesnsitive
+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_LEVEL_SHFT)); // Level triggered
+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_SENSE_SHFT)); // Low level
+
+ local_irq_restore(flags);
+
+ return( request_irq(irq, handler, irqflags, devname, dev_id) );
+}
+
+/* VxWorks compatibility function(s). */
+
+unsigned int BcmHalMapInterrupt(FN_HANDLER pfunc, unsigned int param,
+ unsigned int interruptId)
+{
+ int nRet = -1;
+ char *devname;
+
+ devname = kmalloc(16, GFP_KERNEL);
+ if (devname)
+ sprintf( devname, "brcm_%d", interruptId );
+
+ /* Set the IRQ description to not automatically enable the interrupt at
+ * the end of an ISR. The driver that handles the interrupt must
+ * explicitly call BcmHalInterruptEnable or enable_brcm_irq. This behavior
+ * is consistent with interrupt handling on VxWorks.
+ */
+ irq_desc[interruptId].chip = &brcm_irq_no_end_type;
+
+ if( interruptId >= INTERNAL_ISR_TABLE_OFFSET )
+ {
+ nRet = request_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT,
+ devname, (void *) param );
+ }
+ else if (interruptId >= INTERRUPT_ID_EXTERNAL_0 && interruptId <= INTERRUPT_ID_EXTERNAL_3)
+ {
+ nRet = request_external_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT,
+ devname, (void *) param );
+ }
+
+ return( nRet );
+}
+
+
+EXPORT_SYMBOL(enable_brcm_irq);
+EXPORT_SYMBOL(disable_brcm_irq);
+EXPORT_SYMBOL(request_external_irq);
+EXPORT_SYMBOL(BcmHalMapInterrupt);
+
diff -urN linux-2.6.19/arch/mips/bcm963xx/prom.c linux-2.6.19.new/arch/mips/bcm963xx/prom.c
--- linux-2.6.19/arch/mips/bcm963xx/prom.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/prom.c 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,143 @@
+/*
+<:copyright-gpl
+ Copyright 2004 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+/*
+ * prom.c: PROM library initialization code.
+ *
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <linux/blkdev.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/cpu.h>
+#include <asm/time.h>
+
+#include <bcm_map_part.h>
+#include <board.h>
+#include "boardparms.h"
+#include "softdsl/AdslCoreDefs.h"
+
+
+//char arcs_cmdline[CL_SIZE] __initdata = {0};
+/* inv_xde */
+int boot_loader_type;
+int prom_argc;
+char **prom_argv, **prom_envp;
+
+extern int do_syslog(int, char *, int);
+extern void serial_init(void);
+extern void __init InitNvramInfo( void );
+extern void kerSysFlashInit( void );
+extern unsigned long get_nvram_start_addr(void);
+void __init create_root_nfs_cmdline( char *cmdline );
+
+#define MACH_BCM MACH_BCM96348
+
+const char *get_system_type(void)
+{
+ /*PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr();
+
+ return( pNvramData->szBoardId );*/
+ return "brcm63xx";
+}
+
+unsigned long getMemorySize(void)
+{
+ unsigned long ulSdramType = BOARD_SDRAM_TYPE;
+
+ unsigned long ulSdramSize;
+
+ switch( ulSdramType )
+ {
+ case BP_MEMORY_16MB_1_CHIP:
+ case BP_MEMORY_16MB_2_CHIP:
+ ulSdramSize = 16 * 1024 * 1024;
+ break;
+ case BP_MEMORY_32MB_1_CHIP:
+ case BP_MEMORY_32MB_2_CHIP:
+ ulSdramSize = 32 * 1024 * 1024;
+ break;
+ case BP_MEMORY_64MB_2_CHIP:
+ ulSdramSize = 64 * 1024 * 1024;
+ break;
+ default:
+ ulSdramSize = 8 * 1024 * 1024;
+ break;
+ }
+ if (boot_loader_type == BOOT_CFE)
+ return ulSdramSize;
+ else
+ // assume that there is one contiguous memory map
+ return boot_mem_map.map[0].size;
+}
+
+/* --------------------------------------------------------------------------
+ Name: prom_init
+ -------------------------------------------------------------------------- */
+void __init prom_init(void)
+{
+ extern ulong r4k_interval;
+
+ serial_init();
+
+ prom_argc = fw_arg0;
+ prom_argv = (char **) fw_arg1;
+ prom_envp = (char **) fw_arg2;
+
+ if ((prom_argv > 0x80000000) && (prom_argv < 0x82000000)) {
+ strncpy(arcs_cmdline, prom_argv[1], CL_SIZE);
+ }
+
+ if (strncmp(arcs_cmdline, "boot_loader=RedBoot", 19) != 0) {
+ boot_loader_type = BOOT_CFE;
+ }
+ else {
+ boot_loader_type = BOOT_REDBOOT;
+ }
+
+ do_syslog(8, NULL, 8);
+
+ printk( "%s prom init\n", get_system_type() );
+
+ PERF->IrqMask = 0;
+
+ arcs_cmdline[0] = '\0';
+
+ if (boot_loader_type == BOOT_CFE)
+ add_memory_region(0, (getMemorySize() - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
+ else
+ add_memory_region(0, (0x01000000 - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
+
+ mips_machgroup = MACH_GROUP_BRCM;
+ mips_machtype = MACH_BCM;
+
+ BpSetBoardId("96348GW-10");
+}
+
+/* --------------------------------------------------------------------------
+ Name: prom_free_prom_memory
+Abstract:
+ -------------------------------------------------------------------------- */
+void __init prom_free_prom_memory(void)
+{
+
+}
+
diff -urN linux-2.6.19/arch/mips/bcm963xx/ser_init.c linux-2.6.19.new/arch/mips/bcm963xx/ser_init.c
--- linux-2.6.19/arch/mips/bcm963xx/ser_init.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/ser_init.c 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,180 @@
+/*
+<:copyright-gpl
+ Copyright 2004 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+/*
+ * Broadcom bcm63xx serial port initialization, also prepare for printk
+ * by registering with console_init
+ *
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/console.h>
+#include <linux/sched.h>
+
+#include <asm/addrspace.h>
+#include <asm/irq.h>
+#include <asm/reboot.h>
+#include <asm/gdb-stub.h>
+#include <asm/mc146818rtc.h>
+
+#include <bcm_map_part.h>
+#include <board.h>
+
+#define SER63XX_DEFAULT_BAUD 115200
+#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH)
+#define stUart ((volatile Uart * const) UART_BASE)
+
+// Transmit interrupts
+#define TXINT (TXFIFOEMT | TXUNDERR | TXOVFERR)
+// Receive interrupts
+#define RXINT (RXFIFONE | RXOVFERR)
+
+/* --------------------------------------------------------------------------
+ Name: serial_init
+ Purpose: Initalize the UART
+-------------------------------------------------------------------------- */
+void __init serial_init(void)
+{
+ UINT32 tmpVal = SER63XX_DEFAULT_BAUD;
+ ULONG clockFreqHz;
+
+#if defined(CONFIG_BCM96345)
+ // Make sure clock is ticking
+ PERF->blkEnables |= UART_CLK_EN;
+#endif
+
+ /* Dissable channel's receiver and transmitter. */
+ stUart->control &= ~(BRGEN|TXEN|RXEN);
+
+ /*--------------------------------------------------------------------*/
+ /* Write the table value to the clock select register. */
+ /* DPullen - this is the equation to use: */
+ /* value = clockFreqHz / baud / 32-1; */
+ /* (snmod) Actually you should also take into account any necessary */
+ /* rounding. Divide by 16, look at lsb, if 0, divide by 2 */
+ /* and subtract 1. If 1, just divide by 2 */
+ /*--------------------------------------------------------------------*/
+ clockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT;
+ tmpVal = (clockFreqHz / tmpVal) / 16;
+ if( tmpVal & 0x01 )
+ tmpVal /= 2; //Rounding up, so sub is already accounted for
+ else
+ tmpVal = (tmpVal / 2) - 1; // Rounding down so we must sub 1
+ stUart->baudword = tmpVal;
+
+ /* Finally, re-enable the transmitter and receiver. */
+ stUart->control |= (BRGEN|TXEN|RXEN);
+
+ stUart->config = (BITS8SYM | ONESTOP);
+ // Set the FIFO interrupt depth ... stUart->fifocfg = 0xAA;
+ stUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS;
+ stUart->intMask = 0;
+ stUart->intMask = RXINT | TXINT;
+}
+
+
+/* prom_putc()
+ * Output a character to the UART
+ */
+void prom_putc(char c)
+{
+ /* Wait for Tx uffer to empty */
+ while (! (READ16(stUart->intStatus) & TXFIFOEMT));
+ /* Send character */
+ stUart->Data = c;
+}
+
+/* prom_puts()
+ * Write a string to the UART
+ */
+void prom_puts(const char *s)
+{
+ while (*s) {
+ if (*s == '\n') {
+ prom_putc('\r');
+ }
+ prom_putc(*s++);
+ }
+}
+
+
+/* prom_getc_nowait()
+ * Returns a character from the UART
+ * Returns -1 if no characters available or corrupted
+ */
+int prom_getc_nowait(void)
+{
+ uint16 uStatus;
+ int cData = -1;
+
+ uStatus = READ16(stUart->intStatus);
+
+ if (uStatus & RXFIFONE) { /* Do we have a character? */
+ cData = READ16(stUart->Data) & 0xff; /* Read character */
+ if (uStatus & (RXFRAMERR | RXPARERR)) { /* If we got an error, throw it away */
+ cData = -1;
+ }
+ }
+
+ return cData;
+}
+
+/* prom_getc()
+ * Returns a charcter from the serial port
+ * Will block until it receives a valid character
+*/
+char prom_getc(void)
+{
+ int cData = -1;
+
+ /* Loop until we get a valid character */
+ while(cData == -1) {
+ cData = prom_getc_nowait();
+ }
+ return (char) cData;
+}
+
+/* prom_testc()
+ * Returns 0 if no characters available
+ */
+int prom_testc(void)
+{
+ uint16 uStatus;
+
+ uStatus = READ16(stUart->intStatus);
+
+ return (uStatus & RXFIFONE);
+}
+
+#if defined (CONFIG_REMOTE_DEBUG)
+/* Prevent other code from writing to the serial port */
+void _putc(char c) { }
+void _puts(const char *ptr) { }
+#else
+/* Low level outputs call prom routines */
+void _putc(char c) {
+ prom_putc(c);
+}
+void _puts(const char *ptr) {
+ prom_puts(ptr);
+}
+#endif
diff -urN linux-2.6.19/arch/mips/bcm963xx/setup.c linux-2.6.19.new/arch/mips/bcm963xx/setup.c
--- linux-2.6.19/arch/mips/bcm963xx/setup.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/setup.c 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,523 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+/*
+ * Generic setup routines for Broadcom 963xx MIPS boards
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/console.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+
+#include <asm/addrspace.h>
+#include <asm/bcache.h>
+#include <asm/irq.h>
+#include <asm/time.h>
+#include <asm/reboot.h>
+#include <asm/gdb-stub.h>
+
+extern void brcm_time_init(void);
+extern unsigned long getMemorySize(void);
+
+#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <bcm_map_part.h>
+#include <bcmpci.h>
+
+static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
+#endif
+
+/* This function should be in a board specific directory. For now,
+ * assume that all boards that include this file use a Broadcom chip
+ * with a soft reset bit in the PLL control register.
+ */
+static void brcm_machine_restart(char *command)
+{
+ const unsigned long ulSoftReset = 0x00000001;
+ unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008;
+ *pulPllCtrl |= ulSoftReset;
+}
+
+static void brcm_machine_halt(void)
+{
+ printk("System halted\n");
+ while (1);
+}
+
+#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
+
+static void mpi_SetLocalPciConfigReg(uint32 reg, uint32 value)
+{
+ /* write index then value */
+ mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;;
+ mpi->pcicfgdata = value;
+}
+
+static uint32 mpi_GetLocalPciConfigReg(uint32 reg)
+{
+ /* write index then get value */
+ mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;;
+ return mpi->pcicfgdata;
+}
+
+/*
+ * mpi_ResetPcCard: Set/Reset the PcCard
+ */
+static void mpi_ResetPcCard(int cardtype, BOOL bReset)
+{
+ if (cardtype == MPI_CARDTYPE_NONE) {
+ return;
+ }
+
+ if (cardtype == MPI_CARDTYPE_CARDBUS) {
+ bReset = ! bReset;
+ }
+
+ if (bReset) {
+ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET);
+ } else {
+ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 | PCCARD_CARD_RESET);
+ }
+}
+
+/*
+ * mpi_ConfigCs: Configure an MPI/EBI chip select
+ */
+static void mpi_ConfigCs(uint32 cs, uint32 base, uint32 size, uint32 flags)
+{
+ mpi->cs[cs].base = ((base & 0x1FFFFFFF) | size);
+ mpi->cs[cs].config = flags;
+}
+
+/*
+ * mpi_InitPcmciaSpace
+ */
+static void mpi_InitPcmciaSpace(void)
+{
+ // ChipSelect 4 controls PCMCIA Memory accesses
+ mpi_ConfigCs(PCMCIA_COMMON_BASE, pcmciaMem, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE));
+ // ChipSelect 5 controls PCMCIA Attribute accesses
+ mpi_ConfigCs(PCMCIA_ATTRIBUTE_BASE, pcmciaAttr, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE));
+ // ChipSelect 6 controls PCMCIA I/O accesses
+ mpi_ConfigCs(PCMCIA_IO_BASE, pcmciaIo, EBI_SIZE_64K, (EBI_WORD_WIDE|EBI_ENABLE));
+
+ mpi->pcmcia_cntl2 = ((PCMCIA_ATTR_ACTIVE << RW_ACTIVE_CNT_BIT) |
+ (PCMCIA_ATTR_INACTIVE << INACTIVE_CNT_BIT) |
+ (PCMCIA_ATTR_CE_SETUP << CE_SETUP_CNT_BIT) |
+ (PCMCIA_ATTR_CE_HOLD << CE_HOLD_CNT_BIT));
+
+ mpi->pcmcia_cntl2 |= (PCMCIA_HALFWORD_EN | PCMCIA_BYTESWAP_DIS);
+}
+
+/*
+ * cardtype_vcc_detect: PC Card's card detect and voltage sense connection
+ *
+ * CD1#/ CD2#/ VS1#/ VS2#/ Card Initial Vcc
+ * CCD1# CCD2# CVS1 CVS2 Type
+ *
+ * GND GND open open 16-bit 5 vdc
+ *
+ * GND GND GND open 16-bit 3.3 vdc
+ *
+ * GND GND open GND 16-bit x.x vdc
+ *
+ * GND GND GND GND 16-bit 3.3 & x.x vdc
+ *
+ *====================================================================
+ *
+ * CVS1 GND CCD1# open CardBus 3.3 vdc
+ *
+ * GND CVS2 open CCD2# CardBus x.x vdc
+ *
+ * GND CVS1 CCD2# open CardBus y.y vdc
+ *
+ * GND CVS2 GND CCD2# CardBus 3.3 & x.x vdc
+ *
+ * CVS2 GND open CCD1# CardBus x.x & y.y vdc
+ *
+ * GND CVS1 CCD2# open CardBus 3.3, x.x & y.y vdc
+ *
+ */
+static int cardtype_vcc_detect(void)
+{
+ uint32 data32;
+ int cardtype;
+
+ cardtype = MPI_CARDTYPE_NONE;
+ mpi->pcmcia_cntl1 = 0x0000A000; // Turn on the output enables and drive
+ // the CVS pins to 0.
+ data32 = mpi->pcmcia_cntl1;
+ switch (data32 & 0x00000003) // Test CD1# and CD2#, see if card is plugged in.
+ {
+ case 0x00000003: // No Card is in the slot.
+ printk("mpi: No Card is in the PCMCIA slot\n");
+ break;
+
+ case 0x00000002: // Partial insertion, No CD2#.
+ printk("mpi: Card in the PCMCIA slot partial insertion, no CD2 signal\n");
+ break;
+
+ case 0x00000001: // Partial insertion, No CD1#.
+ printk("mpi: Card in the PCMCIA slot partial insertion, no CD1 signal\n");
+ break;
+
+ case 0x00000000:
+ mpi->pcmcia_cntl1 = 0x0000A0C0; // Turn off the CVS output enables and
+ // float the CVS pins.
+ mdelay(1);
+ data32 = mpi->pcmcia_cntl1;
+ // Read the Register.
+ switch (data32 & 0x0000000C) // See what is on the CVS pins.
+ {
+ case 0x00000000: // CVS1 and CVS2 are tied to ground, only 1 option.
+ printk("mpi: Detected 3.3 & x.x 16-bit PCMCIA card\n");
+ cardtype = MPI_CARDTYPE_PCMCIA;
+ break;
+
+ case 0x00000004: // CVS1 is open or tied to CCD1/CCD2 and CVS2 is tied to ground.
+ // 2 valid voltage options.
+ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2.
+ {
+ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins.
+ // This is not a valid combination.
+ printk("mpi: Unknown card plugged into slot\n");
+ break;
+
+ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2.
+ mpi->pcmcia_cntl1 = 0x0000A080; // Drive CVS1 to a 0.
+ mdelay(1);
+ data32 = mpi->pcmcia_cntl1;
+ if (data32 & 0x00000002) { // CCD2 is tied to CVS2, not valid.
+ printk("mpi: Unknown card plugged into slot\n");
+ } else { // CCD2 is tied to CVS1.
+ printk("mpi: Detected 3.3, x.x and y.y Cardbus card\n");
+ cardtype = MPI_CARDTYPE_CARDBUS;
+ }
+ break;
+
+ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2.
+ // This is not a valid combination.
+ printk("mpi: Unknown card plugged into slot\n");
+ break;
+
+ case 0x00000000: // CCD1 and CCD2 are tied to ground.
+ printk("mpi: Detected x.x vdc 16-bit PCMCIA card\n");
+ cardtype = MPI_CARDTYPE_PCMCIA;
+ break;
+ }
+ break;
+
+ case 0x00000008: // CVS2 is open or tied to CCD1/CCD2 and CVS1 is tied to ground.
+ // 2 valid voltage options.
+ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2.
+ {
+ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins.
+ // This is not a valid combination.
+ printk("mpi: Unknown card plugged into slot\n");
+ break;
+
+ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2.
+ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0.
+ mdelay(1);
+ data32 = mpi->pcmcia_cntl1;
+ if (data32 & 0x00000002) { // CCD2 is tied to CVS1, not valid.
+ printk("mpi: Unknown card plugged into slot\n");
+ } else {// CCD2 is tied to CVS2.
+ printk("mpi: Detected 3.3 and x.x Cardbus card\n");
+ cardtype = MPI_CARDTYPE_CARDBUS;
+ }
+ break;
+
+ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2.
+ // This is not a valid combination.
+ printk("mpi: Unknown card plugged into slot\n");
+ break;
+
+ case 0x00000000: // CCD1 and CCD2 are tied to ground.
+ cardtype = MPI_CARDTYPE_PCMCIA;
+ printk("mpi: Detected 3.3 vdc 16-bit PCMCIA card\n");
+ break;
+ }
+ break;
+
+ case 0x0000000C: // CVS1 and CVS2 are open or tied to CCD1/CCD2.
+ // 5 valid voltage options.
+
+ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2.
+ {
+ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins.
+ // This is not a valid combination.
+ printk("mpi: Unknown card plugged into slot\n");
+ break;
+
+ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2.
+ // CCD1 is tied to ground.
+ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0.
+ mdelay(1);
+ data32 = mpi->pcmcia_cntl1;
+ if (data32 & 0x00000002) { // CCD2 is tied to CVS1.
+ printk("mpi: Detected y.y vdc Cardbus card\n");
+ } else { // CCD2 is tied to CVS2.
+ printk("mpi: Detected x.x vdc Cardbus card\n");
+ }
+ cardtype = MPI_CARDTYPE_CARDBUS;
+ break;
+
+ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2.
+ // CCD2 is tied to ground.
+
+ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0.
+ mdelay(1);
+ data32 = mpi->pcmcia_cntl1;
+ if (data32 & 0x00000001) {// CCD1 is tied to CVS1.
+ printk("mpi: Detected 3.3 vdc Cardbus card\n");
+ } else { // CCD1 is tied to CVS2.
+ printk("mpi: Detected x.x and y.y Cardbus card\n");
+ }
+ cardtype = MPI_CARDTYPE_CARDBUS;
+ break;
+
+ case 0x00000000: // CCD1 and CCD2 are tied to ground.
+ cardtype = MPI_CARDTYPE_PCMCIA;
+ printk("mpi: Detected 5 vdc 16-bit PCMCIA card\n");
+ break;
+ }
+ break;
+
+ default:
+ printk("mpi: Unknown card plugged into slot\n");
+ break;
+
+ }
+ }
+ return cardtype;
+}
+
+/*
+ * mpi_DetectPcCard: Detect the plugged in PC-Card
+ * Return: < 0 => Unknown card detected
+ * 0 => No card detected
+ * 1 => 16-bit card detected
+ * 2 => 32-bit CardBus card detected
+ */
+static int mpi_DetectPcCard(void)
+{
+ int cardtype;
+
+ cardtype = cardtype_vcc_detect();
+ switch(cardtype) {
+ case MPI_CARDTYPE_PCMCIA:
+ mpi->pcmcia_cntl1 &= ~0x0000e000; // disable enable bits
+ //mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET);
+ mpi->pcmcia_cntl1 |= (PCMCIA_ENABLE | PCMCIA_GPIO_ENABLE);
+ mpi_InitPcmciaSpace();
+ mpi_ResetPcCard(cardtype, FALSE);
+ // Hold card in reset for 10ms
+ mdelay(10);
+ mpi_ResetPcCard(cardtype, TRUE);
+ // Let card come out of reset
+ mdelay(100);
+ break;
+ case MPI_CARDTYPE_CARDBUS:
+ // 8 => CardBus Enable
+ // 1 => PCI Slot Number
+ // C => Float VS1 & VS2
+ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & 0xFFFF0000) |
+ CARDBUS_ENABLE |
+ (CARDBUS_SLOT << 8)|
+ VS2_OEN |
+ VS1_OEN;
+ /* access to this memory window will be to/from CardBus */
+ mpi->l2pmremap1 |= CARDBUS_MEM;
+
+ // Need to reset the Cardbus Card. There's no CardManager to do this,
+ // and we need to be ready for PCI configuration.
+ mpi_ResetPcCard(cardtype, FALSE);
+ // Hold card in reset for 10ms
+ mdelay(10);
+ mpi_ResetPcCard(cardtype, TRUE);
+ // Let card come out of reset
+ mdelay(100);
+ break;
+ default:
+ break;
+ }
+ return cardtype;
+}
+
+static int mpi_init(void)
+{
+ unsigned long data;
+ unsigned int chipid;
+ unsigned int chiprev;
+ unsigned int sdramsize;
+
+ chipid = (PERF->RevID & 0xFFFF0000) >> 16;
+ chiprev = (PERF->RevID & 0xFF);
+ sdramsize = getMemorySize();
+ /*
+ * Init the pci interface
+ */
+ data = GPIO->GPIOMode; // GPIO mode register
+ data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus
+ GPIO->GPIOMode = data; // PCI internal arbiter
+
+ /*
+ * In the BCM6348 CardBus support is defaulted to Slot 0
+ * because there is no external IDSEL for CardBus. To disable
+ * the CardBus and allow a standard PCI card in Slot 0
+ * set the cbus_idsel field to 0x1f.
+ */
+ /*
+ uData = mpi->pcmcia_cntl1;
+ uData |= CARDBUS_IDSEL;
+ mpi->pcmcia_cntl1 = uData;
+ */
+ // Setup PCI I/O Window range. Give 64K to PCI I/O
+ mpi->l2piorange = ~(BCM_PCI_IO_SIZE_64KB-1);
+ // UBUS to PCI I/O base address
+ mpi->l2piobase = BCM_PCI_IO_BASE & BCM_PCI_ADDR_MASK;
+ // UBUS to PCI I/O Window remap
+ mpi->l2pioremap = (BCM_PCI_IO_BASE | MEM_WINDOW_EN);
+
+ // enable PCI related GPIO pins and data swap between system and PCI bus
+ mpi->locbuscntrl = (EN_PCI_GPIO | DIR_U2P_NOSWAP);
+
+ /* Enable 6348 BusMaster and Memory access mode */
+ data = mpi_GetLocalPciConfigReg(PCI_COMMAND);
+ data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ mpi_SetLocalPciConfigReg(PCI_COMMAND, data);
+
+ /* Configure two 16 MByte PCI to System memory regions. */
+ /* These memory regions are used when PCI device is a bus master */
+ /* Accesses to the SDRAM from PCI bus will be "byte swapped" for this region */
+ mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_3, BCM_HOST_MEM_SPACE1);
+ mpi->sp0remap = 0x0;
+
+ /* Accesses to the SDRAM from PCI bus will not be "byte swapped" for this region */
+ mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_4, BCM_HOST_MEM_SPACE2);
+ mpi->sp1remap = 0x0;
+ mpi->pcimodesel |= (PCI_BAR2_NOSWAP | 0x40);
+
+ if ((chipid == 0x6348) && (chiprev == 0xb0)) {
+ mpi->sp0range = ~(sdramsize-1);
+ mpi->sp1range = ~(sdramsize-1);
+ }
+ /*
+ * Change 6348 PCI Cfg Reg. offset 0x40 to PCI memory read retry count infinity
+ * by set 0 in bit 8~15. This resolve read Bcm4306 srom return 0xffff in
+ * first read.
+ */
+ data = mpi_GetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER);
+ data &= ~BRCM_PCI_CONFIG_TIMER_RETRY_MASK;
+ data |= 0x00000080;
+ mpi_SetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER, data);
+
+ /* enable pci interrupt */
+ mpi->locintstat |= (EXT_PCI_INT << 16);
+
+ mpi_DetectPcCard();
+
+ ioport_resource.start = BCM_PCI_IO_BASE;
+ ioport_resource.end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB;
+
+#if defined(CONFIG_USB)
+ PERF->blkEnables |= USBH_CLK_EN;
+ mdelay(100);
+ *USBH_NON_OHCI = NON_OHCI_BYTE_SWAP;
+#endif
+
+ return 0;
+}
+#endif
+
+static int __init brcm63xx_setup(void)
+{
+ extern int panic_timeout;
+
+ _machine_restart = brcm_machine_restart;
+ _machine_halt = brcm_machine_halt;
+ pm_power_off = brcm_machine_halt;
+
+ board_time_init = brcm_time_init;
+
+ panic_timeout = 5;
+
+#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
+ /* mpi initialization */
+ mpi_init();
+#endif
+ return 0;
+}
+
+void __init plat_mem_setup(void)
+{
+ brcm63xx_setup();
+}
+
+/***************************************************************************
+ * C++ New and delete operator functions
+ ***************************************************************************/
+
+/* void *operator new(unsigned int sz) */
+void *_Znwj(unsigned int sz)
+{
+ return( kmalloc(sz, GFP_KERNEL) );
+}
+
+/* void *operator new[](unsigned int sz)*/
+void *_Znaj(unsigned int sz)
+{
+ return( kmalloc(sz, GFP_KERNEL) );
+}
+
+/* placement new operator */
+/* void *operator new (unsigned int size, void *ptr) */
+void *ZnwjPv(unsigned int size, void *ptr)
+{
+ return ptr;
+}
+
+/* void operator delete(void *m) */
+void _ZdlPv(void *m)
+{
+ kfree(m);
+}
+
+/* void operator delete[](void *m) */
+void _ZdaPv(void *m)
+{
+ kfree(m);
+}
+
+EXPORT_SYMBOL(_Znwj);
+EXPORT_SYMBOL(_Znaj);
+EXPORT_SYMBOL(ZnwjPv);
+EXPORT_SYMBOL(_ZdlPv);
+EXPORT_SYMBOL(_ZdaPv);
+
diff -urN linux-2.6.19/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h linux-2.6.19.new/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h
--- linux-2.6.19/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,2 @@
+#define ADSL_SDRAM_IMAGE_SIZE (384*1024)
+
diff -urN linux-2.6.19/arch/mips/bcm963xx/time.c linux-2.6.19.new/arch/mips/bcm963xx/time.c
--- linux-2.6.19/arch/mips/bcm963xx/time.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/bcm963xx/time.c 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,114 @@
+/*
+<:copyright-gpl
+ Copyright 2004 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+/*
+ * Setup time for Broadcom 963xx MIPS boards
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+
+#include <asm/mipsregs.h>
+#include <asm/ptrace.h>
+#include <asm/div64.h>
+#include <asm/time.h>
+
+#include <bcm_map_part.h>
+#include <bcm_intr.h>
+
+static unsigned long r4k_offset; /* Amount to increment compare reg each time */
+static unsigned long r4k_cur; /* What counter should be at next timer irq */
+
+/* *********************************************************************
+ * calculateCpuSpeed()
+ * Calculate the BCM6348 CPU speed by reading the PLL strap register
+ * and applying the following formula:
+ * cpu_clk = (.25 * 64MHz freq) * (N1 + 1) * (N2 + 2) / (M1_CPU + 1)
+ * Input parameters:
+ * none
+ * Return value:
+ * none
+ ********************************************************************* */
+
+static inline unsigned long __init calculateCpuSpeed(void)
+{
+ UINT32 pllStrap = PERF->PllStrap;
+ int n1 = (pllStrap & PLL_N1_MASK) >> PLL_N1_SHFT;
+ int n2 = (pllStrap & PLL_N2_MASK) >> PLL_N2_SHFT;
+ int m1cpu = (pllStrap & PLL_M1_CPU_MASK) >> PLL_M1_CPU_SHFT;
+
+ return (16 * (n1 + 1) * (n2 + 2) / (m1cpu + 1)) * 1000000;
+}
+
+
+static inline unsigned long __init cal_r4koff(void)
+{
+ mips_hpt_frequency = calculateCpuSpeed() / 2;
+ return (mips_hpt_frequency / HZ);
+}
+
+
+/*
+ * There are a lot of conceptually broken versions of the MIPS timer interrupt
+ * handler floating around. This one is rather different, but the algorithm
+ * is provably more robust.
+ */
+irqreturn_t brcm_timer_interrupt(struct pt_regs *regs)
+{
+ int irq = MIPS_TIMER_INT;
+
+ irq_enter();
+ kstat_this_cpu.irqs[irq]++;
+
+ timer_interrupt(irq, regs);
+ irq_exit();
+ return IRQ_HANDLED;
+}
+
+
+void __init brcm_time_init(void)
+{
+ unsigned int est_freq, flags;
+ local_irq_save(flags);
+
+ printk("calculating r4koff... ");
+ r4k_offset = cal_r4koff();
+ printk("%08lx(%d)\n", r4k_offset, (int)r4k_offset);
+
+ est_freq = 2 * r4k_offset * HZ;
+ est_freq += 5000; /* round */
+ est_freq -= est_freq % 10000;
+ printk("CPU frequency %d.%02d MHz\n", est_freq / 1000000,
+ (est_freq % 1000000) * 100 / 1000000);
+ local_irq_restore(flags);
+}
+
+
+void __init plat_timer_setup(struct irqaction *irq)
+{
+ r4k_cur = (read_c0_count() + r4k_offset);
+ write_c0_compare(r4k_cur);
+ set_c0_status(IE_IRQ5);
+}
diff -urN linux-2.6.19/arch/mips/kernel/cpu-probe.c linux-2.6.19.new/arch/mips/kernel/cpu-probe.c
--- linux-2.6.19/arch/mips/kernel/cpu-probe.c 2006-11-29 22:57:37.000000000 +0100
+++ linux-2.6.19.new/arch/mips/kernel/cpu-probe.c 2006-12-16 18:46:31.000000000 +0100
@@ -602,6 +602,25 @@
return;
}
+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c)
+{
+ decode_configs(c);
+ switch (c->processor_id & 0xff00) {
+ case PRID_IMP_BCM6338:
+ c->cputype = CPU_BCM6338;
+ break;
+ case PRID_IMP_BCM6345:
+ c->cputype = CPU_BCM6345;
+ break;
+ case PRID_IMP_BCM6348:
+ c->cputype = CPU_BCM6348;
+ break;
+ default:
+ c->cputype = CPU_UNKNOWN;
+ break;
+ }
+}
+
static inline void cpu_probe_mips(struct cpuinfo_mips *c)
{
decode_configs(c);
@@ -736,6 +755,9 @@
case PRID_COMP_LEGACY:
cpu_probe_legacy(c);
break;
+ case PRID_COMP_BROADCOM:
+ cpu_probe_broadcom(c);
+ break;
case PRID_COMP_MIPS:
cpu_probe_mips(c);
break;
diff -urN linux-2.6.19/arch/mips/kernel/proc.c linux-2.6.19.new/arch/mips/kernel/proc.c
--- linux-2.6.19/arch/mips/kernel/proc.c 2006-11-29 22:57:37.000000000 +0100
+++ linux-2.6.19.new/arch/mips/kernel/proc.c 2006-12-16 18:46:31.000000000 +0100
@@ -84,6 +84,9 @@
[CPU_VR4181A] = "NEC VR4181A",
[CPU_SR71000] = "Sandcraft SR71000",
[CPU_PR4450] = "Philips PR4450",
+ [CPU_BCM6338] = "BCM6338",
+ [CPU_BCM6345] = "BCM6345",
+ [CPU_BCM6348] = "BCM6348",
};
diff -urN linux-2.6.19/arch/mips/mm/c-r4k.c linux-2.6.19.new/arch/mips/mm/c-r4k.c
--- linux-2.6.19/arch/mips/mm/c-r4k.c 2006-11-29 22:57:37.000000000 +0100
+++ linux-2.6.19.new/arch/mips/mm/c-r4k.c 2006-12-16 18:46:31.000000000 +0100
@@ -852,6 +852,13 @@
if (!(config & MIPS_CONF_M))
panic("Don't know how to probe P-caches on this cpu.");
+ if (c->cputype == CPU_BCM6338 || c->cputype == CPU_BCM6345 || c->cputype == CPU_BCM6348)
+ {
+ printk("brcm mips: enabling icache and dcache...\n");
+ /* Enable caches */
+ write_c0_diag(read_c0_diag() | 0xC0000000);
+ }
+
/*
* So we seem to be a MIPS32 or MIPS64 CPU
* So let's probe the I-cache ...
diff -urN linux-2.6.19/arch/mips/mm/tlbex.c linux-2.6.19.new/arch/mips/mm/tlbex.c
--- linux-2.6.19/arch/mips/mm/tlbex.c 2006-11-29 22:57:37.000000000 +0100
+++ linux-2.6.19.new/arch/mips/mm/tlbex.c 2006-12-16 18:46:31.000000000 +0100
@@ -880,6 +880,9 @@
case CPU_4KSC:
case CPU_20KC:
case CPU_25KF:
+ case CPU_BCM6338:
+ case CPU_BCM6345:
+ case CPU_BCM6348:
tlbw(p);
break;
diff -urN linux-2.6.19/arch/mips/pci/Makefile linux-2.6.19.new/arch/mips/pci/Makefile
--- linux-2.6.19/arch/mips/pci/Makefile 2006-11-29 22:57:37.000000000 +0100
+++ linux-2.6.19.new/arch/mips/pci/Makefile 2006-12-16 18:48:18.000000000 +0100
@@ -17,6 +17,7 @@
obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o
obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
+obj-$(CONFIG_BCM_PCI) += fixup-bcm96348.o pci-bcm96348.o ops-bcm96348.o
#
# These are still pretty much in the old state, watch, go blind.
diff -urN linux-2.6.19/arch/mips/pci/fixup-bcm96348.c linux-2.6.19.new/arch/mips/pci/fixup-bcm96348.c
--- linux-2.6.19/arch/mips/pci/fixup-bcm96348.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/pci/fixup-bcm96348.c 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,93 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+
+#include <bcmpci.h>
+#include <bcm_intr.h>
+#include <bcm_map_part.h>
+
+static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
+
+static char irq_tab_bcm96348[] __initdata = {
+ [0] = INTERRUPT_ID_MPI,
+ [1] = INTERRUPT_ID_MPI,
+#if defined(CONFIG_USB)
+ [USB_HOST_SLOT] = INTERRUPT_ID_USBH
+#endif
+};
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return irq_tab_bcm96348[slot];
+}
+
+static void bcm96348_fixup(struct pci_dev *dev)
+{
+ uint32 memaddr;
+ uint32 size;
+
+ memaddr = pci_resource_start(dev, 0);
+ size = pci_resource_len(dev, 0);
+
+ switch (PCI_SLOT(dev->devfn)) {
+ case 0:
+ // UBUS to PCI address range
+ // Memory Window 1. Mask determines which bits are decoded.
+ mpi->l2pmrange1 = ~(size-1);
+ // UBUS to PCI Memory base address. This is akin to the ChipSelect base
+ // register.
+ mpi->l2pmbase1 = memaddr & BCM_PCI_ADDR_MASK;
+ // UBUS to PCI Remap Address. Replaces the masked address bits in the
+ // range register with this setting.
+ // Also, enable direct I/O and direct Memory accesses
+ mpi->l2pmremap1 = (memaddr | MEM_WINDOW_EN);
+ break;
+
+ case 1:
+ // Memory Window 2
+ mpi->l2pmrange2 = ~(size-1);
+ // UBUS to PCI Memory base address.
+ mpi->l2pmbase2 = memaddr & BCM_PCI_ADDR_MASK;
+ // UBUS to PCI Remap Address
+ mpi->l2pmremap2 = (memaddr | MEM_WINDOW_EN);
+ break;
+
+#if defined(CONFIG_USB)
+ case USB_HOST_SLOT:
+ dev->resource[0].start = USB_HOST_BASE;
+ dev->resource[0].end = USB_HOST_BASE+USB_BAR0_MEM_SIZE-1;
+ break;
+#endif
+ }
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_ANY_ID,
+ bcm96348_fixup);
+
+/*struct pci_fixup pcibios_fixups[] = {
+ { PCI_FIXUP_FINAL, PCI_ANY_ID, PCI_ANY_ID, bcm96348_fixup },
+ {0}
+};*/
diff -urN linux-2.6.19/arch/mips/pci/ops-bcm96348.c linux-2.6.19.new/arch/mips/pci/ops-bcm96348.c
--- linux-2.6.19/arch/mips/pci/ops-bcm96348.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/pci/ops-bcm96348.c 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,276 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/addrspace.h>
+
+#include <bcm_intr.h>
+#include <bcm_map_part.h>
+#include <bcmpci.h>
+
+#include <linux/delay.h>
+
+#if defined(CONFIG_USB)
+#if 0
+#define DPRINT(x...) printk(x)
+#else
+#define DPRINT(x...)
+#endif
+
+static int
+pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size);
+static int
+pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size);
+
+static bool usb_mem_size_rd = FALSE;
+static uint32 usb_mem_base = 0;
+static uint32 usb_cfg_space_cmd_reg = 0;
+#endif
+static bool pci_mem_size_rd = FALSE;
+
+static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
+
+static void mpi_SetupPciConfigAccess(uint32 addr)
+{
+ mpi->l2pcfgctl = (DIR_CFG_SEL | DIR_CFG_USEREG | addr) & ~CONFIG_TYPE;
+}
+
+static void mpi_ClearPciConfigAccess(void)
+{
+ mpi->l2pcfgctl = 0x00000000;
+}
+
+#if defined(CONFIG_USB)
+/* --------------------------------------------------------------------------
+ Name: pci63xx_int_write
+Abstract: PCI Config write on internal device(s)
+ -------------------------------------------------------------------------- */
+static int
+pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size)
+{
+ if (PCI_SLOT(devfn) != USB_HOST_SLOT) {
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+ switch (size) {
+ case 1:
+ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %02X\n",
+ PCI_SLOT(devfn), where, size, *value);
+ break;
+ case 2:
+ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %04X\n",
+ PCI_SLOT(devfn), where, size, *value);
+ switch (where) {
+ case PCI_COMMAND:
+ usb_cfg_space_cmd_reg = *value;
+ break;
+ default:
+ break;
+ }
+ break;
+ case 4:
+ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %08lX\n",
+ PCI_SLOT(devfn), where, size, *value);
+ switch (where) {
+ case PCI_BASE_ADDRESS_0:
+ if (*value == 0xffffffff) {
+ usb_mem_size_rd = TRUE;
+ } else {
+ usb_mem_base = *value;
+ }
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/* --------------------------------------------------------------------------
+ Name: pci63xx_int_read
+Abstract: PCI Config read on internal device(s)
+ -------------------------------------------------------------------------- */
+static int
+pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size)
+{
+ uint32 retValue = 0xFFFFFFFF;
+
+ if (PCI_SLOT(devfn) != USB_HOST_SLOT) {
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+ // For now, this is specific to the USB Host controller. We can
+ // make it more general if we have to...
+ // Emulate PCI Config accesses
+ switch (where) {
+ case PCI_VENDOR_ID:
+ case PCI_DEVICE_ID:
+ retValue = PCI_VENDOR_ID_BROADCOM | 0x63000000;
+ break;
+ case PCI_COMMAND:
+ case PCI_STATUS:
+ retValue = (0x0006 << 16) | usb_cfg_space_cmd_reg;
+ break;
+ case PCI_CLASS_REVISION:
+ case PCI_CLASS_DEVICE:
+ retValue = (PCI_CLASS_SERIAL_USB << 16) | (0x10 << 8) | 0x01;
+ break;
+ case PCI_BASE_ADDRESS_0:
+ if (usb_mem_size_rd) {
+ retValue = USB_BAR0_MEM_SIZE;
+ } else {
+ if (usb_mem_base != 0)
+ retValue = usb_mem_base;
+ else
+ retValue = USB_HOST_BASE;
+ }
+ usb_mem_size_rd = FALSE;
+ break;
+ case PCI_CACHE_LINE_SIZE:
+ case PCI_LATENCY_TIMER:
+ retValue = 0;
+ break;
+ case PCI_HEADER_TYPE:
+ retValue = PCI_HEADER_TYPE_NORMAL;
+ break;
+ case PCI_SUBSYSTEM_VENDOR_ID:
+ retValue = PCI_VENDOR_ID_BROADCOM;
+ break;
+ case PCI_SUBSYSTEM_ID:
+ retValue = 0x6300;
+ break;
+ case PCI_INTERRUPT_LINE:
+ retValue = INTERRUPT_ID_USBH;
+ break;
+ default:
+ break;
+ }
+
+ switch (size) {
+ case 1:
+ *value = (retValue >> ((where & 3) << 3)) & 0xff;
+ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %02X\n",
+ PCI_SLOT(devfn), where, size, *value);
+ break;
+ case 2:
+ *value = (retValue >> ((where & 3) << 3)) & 0xffff;
+ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %04X\n",
+ PCI_SLOT(devfn), where, size, *value);
+ break;
+ case 4:
+ *value = retValue;
+ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %08lX\n",
+ PCI_SLOT(devfn), where, size, *value);
+ break;
+ default:
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+#endif
+
+static int bcm96348_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 * val)
+{
+ volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1);
+ uint32 data;
+
+#if defined(CONFIG_USB)
+ if (PCI_SLOT(devfn) == USB_HOST_SLOT)
+ return pci63xx_int_read(devfn, where, val, size);
+#endif
+
+ mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where));
+ data = *(uint32 *)ioBase;
+ switch(size) {
+ case 1:
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ break;
+ case 2:
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ break;
+ case 4:
+ *val = data;
+ /* Special case for reading PCI device range */
+ if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) {
+ if (pci_mem_size_rd) {
+ /* bcm6348 PCI memory window minimum size is 64K */
+ *val &= PCI_SIZE_64K;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+ pci_mem_size_rd = FALSE;
+ mpi_ClearPciConfigAccess();
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm96348_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1);
+ uint32 data;
+
+#if defined(CONFIG_USB)
+ if (PCI_SLOT(devfn) == USB_HOST_SLOT)
+ return pci63xx_int_write(devfn, where, &val, size);
+#endif
+ mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where));
+ data = *(uint32 *)ioBase;
+ switch(size) {
+ case 1:
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ break;
+ case 2:
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ break;
+ case 4:
+ data = val;
+ /* Special case for reading PCI device range */
+ if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) {
+ if (val == 0xffffffff)
+ pci_mem_size_rd = TRUE;
+ }
+ break;
+ default:
+ break;
+ }
+ *(uint32 *)ioBase = data;
+ udelay(500);
+ mpi_ClearPciConfigAccess();
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops bcm96348_pci_ops = {
+ .read = bcm96348_pcibios_read,
+ .write = bcm96348_pcibios_write
+};
diff -urN linux-2.6.19/arch/mips/pci/pci-bcm96348.c linux-2.6.19.new/arch/mips/pci/pci-bcm96348.c
--- linux-2.6.19/arch/mips/pci/pci-bcm96348.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/arch/mips/pci/pci-bcm96348.c 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,54 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+//#include <asm/pci_channel.h>
+#include <bcmpci.h>
+
+static struct resource bcm_pci_io_resource = {
+ .name = "bcm96348 pci IO space",
+ .start = BCM_PCI_IO_BASE,
+ .end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB - 1,
+ .flags = IORESOURCE_IO
+};
+
+static struct resource bcm_pci_mem_resource = {
+ .name = "bcm96348 pci memory space",
+ .start = BCM_PCI_MEM_BASE,
+ .end = BCM_PCI_MEM_BASE + BCM_PCI_MEM_SIZE_16MB - 1,
+ .flags = IORESOURCE_MEM
+};
+
+extern struct pci_ops bcm96348_pci_ops;
+
+struct pci_controller bcm96348_controller = {
+ .pci_ops = &bcm96348_pci_ops,
+ .io_resource = &bcm_pci_io_resource,
+ .mem_resource = &bcm_pci_mem_resource,
+};
+
+static void bcm96348_pci_init(void)
+{
+ register_pci_controller(&bcm96348_controller);
+}
+
+arch_initcall(bcm96348_pci_init);
diff -urN linux-2.6.19/drivers/serial/Makefile linux-2.6.19.new/drivers/serial/Makefile
--- linux-2.6.19/drivers/serial/Makefile 2006-11-29 22:57:37.000000000 +0100
+++ linux-2.6.19.new/drivers/serial/Makefile 2006-12-16 18:49:17.000000000 +0100
@@ -56,3 +56,4 @@
obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
+obj-$(CONFIG_BCM_SERIAL) += bcm63xx_cons.o
diff -urN linux-2.6.19/drivers/serial/bcm63xx_cons.c linux-2.6.19.new/drivers/serial/bcm63xx_cons.c
--- linux-2.6.19/drivers/serial/bcm63xx_cons.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/drivers/serial/bcm63xx_cons.c 2006-12-16 18:46:31.000000000 +0100
@@ -0,0 +1,1049 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+/* Description: Serial port driver for the BCM963XX. */
+
+#define CARDNAME "bcm963xx_serial driver"
+#define VERSION "2.0"
+#define VER_STR CARDNAME " v" VERSION "\n"
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+
+/* for definition of struct console */
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <asm/uaccess.h>
+
+#include <bcmtypes.h>
+#include <board.h>
+#include <bcm_map_part.h>
+#include <bcm_intr.h>
+
+static DEFINE_SPINLOCK(bcm963xx_serial_lock);
+
+extern void _putc(char);
+extern void _puts(const char *);
+
+typedef struct bcm_serial {
+ volatile Uart * port;
+ int type;
+ int flags;
+ int irq;
+ int baud_base;
+ int blocked_open;
+ unsigned short close_delay;
+ unsigned short closing_wait;
+ unsigned short line; /* port/line number */
+ unsigned short cflags; /* line configuration flag */
+ unsigned short x_char; /* xon/xoff character */
+ unsigned short read_status_mask; /* mask for read condition */
+ unsigned short ignore_status_mask; /* mask for ignore condition */
+ unsigned long event; /* mask used in BH */
+ int xmit_head; /* Position of the head */
+ int xmit_tail; /* Position of the tail */
+ int xmit_cnt; /* Count of the chars in the buffer */
+ int count; /* indicates how many times it has been opened */
+ int magic;
+
+ struct async_icount icount; /* keep track of things ... */
+ struct tty_struct *tty; /* tty associated */
+ struct termios normal_termios;
+
+ wait_queue_head_t open_wait;
+ wait_queue_head_t close_wait;
+
+ long session; /* Session of opening process */
+ long pgrp; /* pgrp of opening process */
+
+ unsigned char is_initialized;
+} Context;
+
+
+/*---------------------------------------------------------------------*/
+/* Define bits in the Interrupt Enable register */
+/*---------------------------------------------------------------------*/
+/* Enable receive interrupt */
+#define RXINT (RXFIFONE|RXOVFERR)
+
+/* Enable transmit interrupt */
+#define TXINT (TXFIFOEMT|TXUNDERR|TXOVFERR)
+
+/* Enable receiver line status interrupt */
+#define LSINT (RXBRK|RXPARERR|RXFRAMERR)
+
+#define BCM_NUM_UARTS 1
+
+#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH)
+
+
+static struct bcm_serial multi[BCM_NUM_UARTS];
+static struct bcm_serial *lines[BCM_NUM_UARTS];
+static struct tty_driver *serial_driver;
+static struct termios *serial_termios[BCM_NUM_UARTS];
+static struct termios *serial_termios_locked[BCM_NUM_UARTS];
+
+
+static void bcm_stop (struct tty_struct *tty);
+static void bcm_start (struct tty_struct *tty);
+static inline void receive_chars (struct bcm_serial * info);
+static int startup (struct bcm_serial *info);
+static void shutdown (struct bcm_serial * info);
+static void change_speed( volatile Uart *pUart, tcflag_t cFlag );
+static void bcm63xx_cons_flush_chars (struct tty_struct *tty);
+static int bcm63xx_cons_write (struct tty_struct *tty,
+ const unsigned char *buf, int count);
+static int bcm63xx_cons_write_room (struct tty_struct *tty);
+static int bcm_chars_in_buffer (struct tty_struct *tty);
+static void bcm_flush_buffer (struct tty_struct *tty);
+static void bcm_throttle (struct tty_struct *tty);
+static void bcm_unthrottle (struct tty_struct *tty);
+static void bcm_send_xchar (struct tty_struct *tty, char ch);
+static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo);
+static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info);
+static int get_lsr_info (struct bcm_serial *info, unsigned int *value);
+static void send_break (struct bcm_serial *info, int duration);
+static int bcm_ioctl (struct tty_struct * tty, struct file * file,
+ unsigned int cmd, unsigned long arg);
+static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios);
+static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp);
+static void bcm_hangup (struct tty_struct *tty);
+static int block_til_ready (struct tty_struct *tty, struct file *filp, struct bcm_serial *info);
+static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp);
+static int __init bcm63xx_serialinit(void);
+
+
+/*
+ * ------------------------------------------------------------
+ * rs_stop () and rs_start ()
+ *
+ * These routines are called before setting or resetting
+ * tty->stopped. They enable or disable transmitter interrupts,
+ * as necessary.
+ * ------------------------------------------------------------
+ */
+static void bcm_stop (struct tty_struct *tty)
+{
+}
+
+static void bcm_start (struct tty_struct *tty)
+{
+ _puts(CARDNAME " Start\n");
+}
+
+/*
+ * ------------------------------------------------------------
+ * receive_char ()
+ *
+ * This routine deals with inputs from any lines.
+ * ------------------------------------------------------------
+ */
+static inline void receive_chars (struct bcm_serial * info)
+{
+ struct tty_struct *tty = 0;
+ struct async_icount * icount;
+ int ignore = 0;
+ unsigned short status, tmp;
+ UCHAR ch = 0;
+ while ((status = info->port->intStatus) & RXINT)
+ {
+ char flag_char = TTY_NORMAL;
+
+ if (status & RXFIFONE)
+ ch = info->port->Data; // Read the character
+ tty = info->tty; /* now tty points to the proper dev */
+ icount = &info->icount;
+ if (! tty)
+ break;
+ if (!tty_buffer_request_room(tty, 1))
+ break;
+ icount->rx++;
+ if (status & RXBRK)
+ {
+ flag_char = TTY_BREAK;
+ icount->brk++;
+ }
+ // keep track of the statistics
+ if (status & (RXFRAMERR | RXPARERR | RXOVFERR))
+ {
+ if (status & RXPARERR) /* parity error */
+ icount->parity++;
+ else
+ if (status & RXFRAMERR) /* frame error */
+ icount->frame++;
+ if (status & RXOVFERR)
+ {
+ // Overflow. Reset the RX FIFO
+ info->port->fifoctl |= RSTRXFIFOS;
+ icount->overrun++;
+ }
+ // check to see if we should ignore the character
+ // and mask off conditions that should be ignored
+ if (status & info->ignore_status_mask)
+ {
+ if (++ignore > 100 )
+ break;
+ goto ignore_char;
+ }
+ // Mask off the error conditions we want to ignore
+ tmp = status & info->read_status_mask;
+ if (tmp & RXPARERR)
+ {
+ flag_char = TTY_PARITY;
+ }
+ else
+ if (tmp & RXFRAMERR)
+ {
+ flag_char = TTY_FRAME;
+ }
+ if (tmp & RXOVFERR)
+ {
+ tty_insert_flip_char(tty, ch, flag_char);
+ ch = 0;
+ flag_char = TTY_OVERRUN;
+ if (!tty_buffer_request_room(tty, 1))
+ break;
+ }
+ }
+ tty_insert_flip_char(tty, ch, flag_char);
+ }
+ignore_char:;
+ tty_flip_buffer_push(tty);
+ tty_schedule_flip(tty);
+
+}
+
+
+/*
+ * ------------------------------------------------------------
+ * bcm_interrupt ()
+ *
+ * this is the main interrupt routine for the chip.
+ * It deals with the multiple ports.
+ * ------------------------------------------------------------
+ */
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+static irqreturn_t bcm_interrupt (int irq, void * dev)
+#else
+static void bcm_interrupt (int irq, void * dev, struct pt_regs * regs)
+#endif
+{
+ struct bcm_serial * info = lines[0];
+ UINT16 intStat;
+
+ /* get pending interrupt flags from UART */
+
+ /* Mask with only the serial interrupts that are enabled */
+ intStat = info->port->intStatus & info->port->intMask;
+ while (intStat)
+ {
+ if (intStat & RXINT)
+ receive_chars (info);
+ else
+ if (intStat & TXINT)
+ info->port->intStatus = TXINT;
+ else /* don't know what it was, so let's mask it */
+ info->port->intMask &= ~intStat;
+
+ intStat = info->port->intStatus & info->port->intMask;
+ }
+
+ // Clear the interrupt
+ BcmHalInterruptEnable (INTERRUPT_ID_UART);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ return IRQ_HANDLED;
+#endif
+}
+
+/*
+ * -------------------------------------------------------------------
+ * startup ()
+ *
+ * various initialization tasks
+ * -------------------------------------------------------------------
+ */
+static int startup (struct bcm_serial *info)
+{
+ // Port is already started...
+ return 0;
+}
+
+/*
+ * -------------------------------------------------------------------
+ * shutdown ()
+ *
+ * This routine will shutdown a serial port; interrupts are disabled, and
+ * DTR is dropped if the hangup on close termio flag is on.
+ * -------------------------------------------------------------------
+ */
+static void shutdown (struct bcm_serial * info)
+{
+ unsigned long flags;
+ if (!info->is_initialized)
+ return;
+
+ spin_lock_irqsave(&bcm963xx_serial_lock, flags);
+
+ info->port->control &= ~(BRGEN|TXEN|RXEN);
+ if (info->tty)
+ set_bit (TTY_IO_ERROR, &info->tty->flags);
+ info->is_initialized = 0;
+
+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
+}
+/*
+ * -------------------------------------------------------------------
+ * change_speed ()
+ *
+ * Set the baud rate, character size, parity and stop bits.
+ * -------------------------------------------------------------------
+ */
+static void change_speed( volatile Uart *pUart, tcflag_t cFlag )
+{
+ unsigned long ulFlags, ulBaud, ulClockFreqHz, ulTmp;
+
+ spin_lock_irqsave(&bcm963xx_serial_lock, ulFlags);
+ switch( cFlag & (CBAUD | CBAUDEX) )
+ {
+ case B115200:
+ ulBaud = 115200;
+ break;
+ case B57600:
+ ulBaud = 57600;
+ break;
+ case B38400:
+ ulBaud = 38400;
+ break;
+ case B19200:
+ ulBaud = 19200;
+ break;
+ case B9600:
+ ulBaud = 9600;
+ break;
+ case B4800:
+ ulBaud = 4800;
+ break;
+ case B2400:
+ ulBaud = 2400;
+ break;
+ case B1800:
+ ulBaud = 1800;
+ break;
+ case B1200:
+ ulBaud = 1200;
+ break;
+ case B600:
+ ulBaud = 600;
+ break;
+ case B300:
+ ulBaud = 300;
+ break;
+ case B200:
+ ulBaud = 200;
+ break;
+ case B150:
+ ulBaud = 150;
+ break;
+ case B134:
+ ulBaud = 134;
+ break;
+ case B110:
+ ulBaud = 110;
+ break;
+ case B75:
+ ulBaud = 75;
+ break;
+ case B50:
+ ulBaud = 50;
+ break;
+ default:
+ ulBaud = 115200;
+ break;
+ }
+
+ /* Calculate buad rate. */
+ ulClockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT;
+ ulTmp = (ulClockFreqHz / ulBaud) / 16;
+ if( ulTmp & 0x01 )
+ ulTmp /= 2; /* Rounding up, so sub is already accounted for */
+ else
+ ulTmp = (ulTmp / 2) - 1; /* Rounding down so we must sub 1 */
+ pUart->baudword = ulTmp;
+
+ /* Set character size, stop bits and parity. */
+ switch( cFlag & CSIZE )
+ {
+ case CS5:
+ ulTmp = BITS5SYM; /* select transmit 5 bit data size */
+ break;
+ case CS6:
+ ulTmp = BITS6SYM; /* select transmit 6 bit data size */
+ break;
+ case CS7:
+ ulTmp = BITS7SYM; /* select transmit 7 bit data size */
+ break;
+ default:
+ ulTmp = BITS8SYM; /* select transmit 8 bit data size */
+ break;
+ }
+ if( cFlag & CSTOPB )
+ ulTmp |= TWOSTOP; /* select 2 stop bits */
+ else
+ ulTmp |= ONESTOP; /* select one stop bit */
+
+ /* Write these values into the config reg. */
+ pUart->config = ulTmp;
+ pUart->control &= ~(RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN);
+ switch( cFlag & (PARENB | PARODD) )
+ {
+ case PARENB|PARODD:
+ pUart->control |= RXPARITYEN | TXPARITYEN;
+ break;
+ case PARENB:
+ pUart->control |= RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN;
+ break;
+ default:
+ pUart->control |= 0;
+ break;
+ }
+
+ /* Reset and flush uart */
+ pUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS;
+ spin_unlock_irqrestore(&bcm963xx_serial_lock, ulFlags);
+}
+
+
+/*
+ * -------------------------------------------------------------------
+ * bcm_flush_char ()
+ *
+ * Nothing to flush. Polled I/O is used.
+ * -------------------------------------------------------------------
+ */
+static void bcm63xx_cons_flush_chars (struct tty_struct *tty)
+{
+}
+
+
+/*
+ * -------------------------------------------------------------------
+ * bcm63xx_cons_write ()
+ *
+ * Main output routine using polled I/O.
+ * -------------------------------------------------------------------
+ */
+static int bcm63xx_cons_write (struct tty_struct *tty,
+ const unsigned char *buf, int count)
+{
+ int c;
+
+ for (c = 0; c < count; c++)
+ _putc(buf[c]);
+ return count;
+}
+
+/*
+ * -------------------------------------------------------------------
+ * bcm63xx_cons_write_room ()
+ *
+ * Compute the amount of space available for writing.
+ * -------------------------------------------------------------------
+ */
+static int bcm63xx_cons_write_room (struct tty_struct *tty)
+{
+ /* Pick a number. Any number. Polled I/O is used. */
+ return 1024;
+}
+
+/*
+ * -------------------------------------------------------------------
+ * bcm_chars_in_buffer ()
+ *
+ * compute the amount of char left to be transmitted
+ * -------------------------------------------------------------------
+ */
+static int bcm_chars_in_buffer (struct tty_struct *tty)
+{
+ return 0;
+}
+
+/*
+ * -------------------------------------------------------------------
+ * bcm_flush_buffer ()
+ *
+ * Empty the output buffer
+ * -------------------------------------------------------------------
+ */
+static void bcm_flush_buffer (struct tty_struct *tty)
+{
+ tty_wakeup(tty);
+}
+
+/*
+ * ------------------------------------------------------------
+ * bcm_throttle () and bcm_unthrottle ()
+ *
+ * This routine is called by the upper-layer tty layer to signal that
+ * incoming characters should be throttled (or not).
+ * ------------------------------------------------------------
+ */
+static void bcm_throttle (struct tty_struct *tty)
+{
+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
+ if (I_IXOFF(tty))
+ info->x_char = STOP_CHAR(tty);
+}
+
+static void bcm_unthrottle (struct tty_struct *tty)
+{
+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
+ if (I_IXOFF(tty))
+ {
+ if (info->x_char)
+ info->x_char = 0;
+ else
+ info->x_char = START_CHAR(tty);
+ }
+}
+
+static void bcm_send_xchar (struct tty_struct *tty, char ch)
+{
+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
+ info->x_char = ch;
+ if (ch)
+ bcm_start (info->tty);
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_ioctl () and friends
+ * ------------------------------------------------------------
+ */
+static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo)
+{
+ struct serial_struct tmp;
+
+ if (!retinfo)
+ return -EFAULT;
+
+ memset (&tmp, 0, sizeof(tmp));
+ tmp.type = info->type;
+ tmp.line = info->line;
+ tmp.port = (int) info->port;
+ tmp.irq = info->irq;
+ tmp.flags = 0;
+ tmp.baud_base = info->baud_base;
+ tmp.close_delay = info->close_delay;
+ tmp.closing_wait = info->closing_wait;
+
+ return copy_to_user (retinfo, &tmp, sizeof(*retinfo));
+}
+
+static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info)
+{
+ struct serial_struct new_serial;
+ struct bcm_serial old_info;
+ int retval = 0;
+
+ if (!new_info)
+ return -EFAULT;
+
+ copy_from_user (&new_serial, new_info, sizeof(new_serial));
+ old_info = *info;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+
+ if (info->count > 1)
+ return -EBUSY;
+
+ /* OK, past this point, all the error checking has been done.
+ * At this point, we start making changes.....
+ */
+ info->baud_base = new_serial.baud_base;
+ info->type = new_serial.type;
+ info->close_delay = new_serial.close_delay;
+ info->closing_wait = new_serial.closing_wait;
+ retval = startup (info);
+ return retval;
+}
+
+/*
+ * get_lsr_info - get line status register info
+ *
+ * Purpose: Let user call ioctl() to get info when the UART physically
+ * is emptied. On bus types like RS485, the transmitter must
+ * release the bus after transmitting. This must be done when
+ * the transmit shift register is empty, not be done when the
+ * transmit holding register is empty. This functionality
+ * allows an RS485 driver to be written in user space.
+ */
+static int get_lsr_info (struct bcm_serial *info, unsigned int *value)
+{
+ return( 0 );
+}
+
+/*
+ * This routine sends a break character out the serial port.
+ */
+static void send_break (struct bcm_serial *info, int duration)
+{
+ unsigned long flags;
+
+ if (!info->port)
+ return;
+
+ current->state = TASK_INTERRUPTIBLE;
+
+ /*save_flags (flags);
+ cli();*/
+ spin_lock_irqsave(&bcm963xx_serial_lock, flags);
+
+ info->port->control |= XMITBREAK;
+ schedule_timeout(duration);
+ info->port->control &= ~XMITBREAK;
+
+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
+ //restore_flags (flags);
+}
+
+static int bcm_ioctl (struct tty_struct * tty, struct file * file,
+ unsigned int cmd, unsigned long arg)
+{
+ int error;
+ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data;
+ int retval;
+
+ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
+ (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT))
+ {
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+ }
+ switch (cmd)
+ {
+
+ case TCSBRK: /* SVID version: non-zero arg --> no break */
+ retval = tty_check_change (tty);
+ if (retval)
+ return retval;
+ tty_wait_until_sent (tty, 0);
+ if (!arg)
+ send_break (info, HZ/4); /* 1/4 second */
+ return 0;
+
+ case TCSBRKP: /* support for POSIX tcsendbreak() */
+ retval = tty_check_change (tty);
+ if (retval)
+ return retval;
+ tty_wait_until_sent (tty, 0);
+ send_break (info, arg ? arg*(HZ/10) : HZ/4);
+ return 0;
+
+ case TIOCGSOFTCAR:
+ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(long));
+ if (!error)
+ return -EFAULT;
+ else
+ {
+ put_user (C_CLOCAL(tty) ? 1 : 0, (unsigned long *)arg);
+ return 0;
+ }
+
+ case TIOCSSOFTCAR:
+ error = get_user (arg, (unsigned long *)arg);
+ if (error)
+ return error;
+ tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0));
+ return 0;
+
+ case TIOCGSERIAL:
+ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(struct serial_struct));
+ if (!error)
+ return -EFAULT;
+ else
+ return get_serial_info (info, (struct serial_struct *)arg);
+
+ case TIOCSSERIAL:
+ return set_serial_info (info, (struct serial_struct *) arg);
+
+ case TIOCSERGETLSR: /* Get line status register */
+ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(unsigned int));
+ if (!error)
+ return -EFAULT;
+ else
+ return get_lsr_info (info, (unsigned int *)arg);
+
+ case TIOCSERGSTRUCT:
+ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(struct bcm_serial));
+ if (!error)
+ return -EFAULT;
+ else
+ {
+ copy_to_user((struct bcm_serial *)arg, info, sizeof(struct bcm_serial));
+ return 0;
+ }
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
+
+static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios)
+{
+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
+
+ if( tty->termios->c_cflag != old_termios->c_cflag )
+ change_speed (info->port, tty->termios->c_cflag);
+}
+
+/*
+ * ------------------------------------------------------------
+ * bcm63xx_cons_close()
+ *
+ * This routine is called when the serial port gets closed. First, we
+ * wait for the last remaining data to be sent. Then, we turn off
+ * the transmit enable and receive enable flags.
+ * ------------------------------------------------------------
+ */
+static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp)
+{
+ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data;
+ unsigned long flags;
+
+ if (!info)
+ return;
+
+ /*save_flags (flags);
+ cli();*/
+ spin_lock_irqsave(&bcm963xx_serial_lock, flags);
+
+ if (tty_hung_up_p (filp))
+ {
+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
+ //restore_flags (flags);
+ return;
+ }
+
+ if ((tty->count == 1) && (info->count != 1))
+ {
+
+ /* Uh, oh. tty->count is 1, which means that the tty
+ * structure will be freed. Info->count should always
+ * be one in these conditions. If it's greater than
+ * one, we've got real problems, since it means the
+ * serial port won't be shutdown.
+ */
+ printk("bcm63xx_cons_close: bad serial port count; tty->count is 1, "
+ "info->count is %d\n", info->count);
+ info->count = 1;
+ }
+
+ if (--info->count < 0)
+ {
+ printk("ds_close: bad serial port count for ttys%d: %d\n",
+ info->line, info->count);
+ info->count = 0;
+ }
+
+ if (info->count)
+ {
+ //restore_flags (flags);
+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
+ return;
+ }
+
+ /* Now we wait for the transmit buffer to clear; and we notify
+ * the line discipline to only process XON/XOFF characters.
+ */
+ tty->closing = 1;
+
+ /* At this point we stop accepting input. To do this, we
+ * disable the receive line status interrupts.
+ */
+ shutdown (info);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ if (tty->driver->flush_buffer)
+ tty->driver->flush_buffer (tty);
+#else
+ if (tty->driver.flush_buffer)
+ tty->driver.flush_buffer (tty);
+#endif
+ if (tty->ldisc.flush_buffer)
+ tty->ldisc.flush_buffer (tty);
+
+ tty->closing = 0;
+ info->event = 0;
+ info->tty = 0;
+ if (tty->ldisc.num != tty_ldisc_get(N_TTY)->num)
+ {
+ if (tty->ldisc.close)
+ (tty->ldisc.close)(tty);
+ tty->ldisc = *tty_ldisc_get(N_TTY);
+ tty->termios->c_line = N_TTY;
+ if (tty->ldisc.open)
+ (tty->ldisc.open)(tty);
+ }
+ if (info->blocked_open)
+ {
+ if (info->close_delay)
+ {
+ current->state = TASK_INTERRUPTIBLE;
+ schedule_timeout(info->close_delay);
+ }
+ wake_up_interruptible (&info->open_wait);
+ }
+ wake_up_interruptible (&info->close_wait);
+
+ //restore_flags (flags);
+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
+}
+
+/*
+ * bcm_hangup () --- called by tty_hangup() when a hangup is signaled.
+ */
+static void bcm_hangup (struct tty_struct *tty)
+{
+
+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
+
+ shutdown (info);
+ info->event = 0;
+ info->count = 0;
+ info->tty = 0;
+ wake_up_interruptible (&info->open_wait);
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_open() and friends
+ * ------------------------------------------------------------
+ */
+static int block_til_ready (struct tty_struct *tty, struct file *filp,
+ struct bcm_serial *info)
+{
+ return 0;
+}
+
+/*
+ * This routine is called whenever a serial port is opened. It
+ * enables interrupts for a serial port. It also performs the
+ * serial-specific initialization for the tty structure.
+ */
+static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp)
+{
+ struct bcm_serial *info;
+ int retval, line;
+
+ // Make sure we're only opening on of the ports we support
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ line = MINOR(tty->driver->cdev.dev) - tty->driver->minor_start;
+#else
+ line = MINOR(tty->device) - tty->driver.minor_start;
+#endif
+
+ if ((line < 0) || (line >= BCM_NUM_UARTS))
+ return -ENODEV;
+
+ info = lines[line];
+
+ tty->low_latency=1;
+ info->port->intMask = 0; /* Clear any pending interrupts */
+ info->port->intMask = RXINT; /* Enable RX */
+
+ info->count++;
+ tty->driver_data = info;
+ info->tty = tty;
+ BcmHalInterruptEnable (INTERRUPT_ID_UART);
+
+ // Start up serial port
+ retval = startup (info);
+ if (retval)
+ return retval;
+
+ retval = block_til_ready (tty, filp, info);
+ if (retval)
+ return retval;
+
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ info->pgrp = process_group(current);
+ info->session = current->signal->session;
+#else
+ info->session = current->session;
+ info->pgrp = current->pgrp;
+#endif
+
+ return 0;
+}
+
+
+static struct tty_operations rs_ops = {
+ .open = bcm63xx_cons_open,
+ .close = bcm63xx_cons_close,
+ .write = bcm63xx_cons_write,
+ .flush_chars = bcm63xx_cons_flush_chars,
+ .write_room = bcm63xx_cons_write_room,
+ .chars_in_buffer = bcm_chars_in_buffer,
+ .flush_buffer = bcm_flush_buffer,
+ .ioctl = bcm_ioctl,
+ .throttle = bcm_throttle,
+ .unthrottle = bcm_unthrottle,
+ .send_xchar = bcm_send_xchar,
+ .set_termios = bcm_set_termios,
+ .stop = bcm_stop,
+ .start = bcm_start,
+ .hangup = bcm_hangup,
+};
+
+/* --------------------------------------------------------------------------
+ Name: bcm63xx_serialinit
+ Purpose: Initialize our BCM63xx serial driver
+-------------------------------------------------------------------------- */
+static int __init bcm63xx_serialinit(void)
+{
+ int i, flags;
+ struct bcm_serial * info;
+
+ // Print the driver version information
+ printk(VER_STR);
+ serial_driver = alloc_tty_driver(BCM_NUM_UARTS);
+ if (!serial_driver)
+ return -ENOMEM;
+
+ serial_driver->owner = THIS_MODULE;
+ serial_driver->devfs_name = "tts/";
+// serial_driver.magic = TTY_DRIVER_MAGIC;
+ serial_driver->name = "ttyS";
+ serial_driver->major = TTY_MAJOR;
+ serial_driver->minor_start = 64;
+// serial_driver.num = BCM_NUM_UARTS;
+ serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ serial_driver->subtype = SERIAL_TYPE_NORMAL;
+ serial_driver->init_termios = tty_std_termios;
+ serial_driver->init_termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
+ serial_driver->flags = TTY_DRIVER_REAL_RAW;
+
+ serial_driver->termios = serial_termios;
+ serial_driver->termios_locked = serial_termios_locked;
+
+ tty_set_operations(serial_driver, &rs_ops);
+
+ if (tty_register_driver (serial_driver))
+ panic("Couldn't register serial driver\n");
+
+ //save_flags(flags); cli();
+ spin_lock_irqsave(&bcm963xx_serial_lock, flags);
+
+ for (i = 0; i < BCM_NUM_UARTS; i++)
+ {
+ info = &multi[i];
+ lines[i] = info;
+ info->magic = SERIAL_MAGIC;
+ info->port = (Uart *) ((char *)UART_BASE + (i * 0x20));
+ info->tty = 0;
+ info->irq = (2 - i) + 8;
+ info->line = i;
+ info->close_delay = 50;
+ info->closing_wait = 3000;
+ info->x_char = 0;
+ info->event = 0;
+ info->count = 0;
+ info->blocked_open = 0;
+ info->normal_termios = serial_driver->init_termios;
+ init_waitqueue_head(&info->open_wait);
+ init_waitqueue_head(&info->close_wait);
+
+ /* If we are pointing to address zero then punt - not correctly
+ * set up in setup.c to handle this.
+ */
+ if (! info->port)
+ return 0;
+ BcmHalMapInterrupt(bcm_interrupt, 0, INTERRUPT_ID_UART);
+ }
+
+ /* order matters here... the trick is that flags
+ * is updated... in request_irq - to immediatedly obliterate
+ * it is unwise.
+ */
+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
+ return 0;
+}
+
+module_init(bcm63xx_serialinit);
+
+/* --------------------------------------------------------------------------
+ Name: bcm_console_print
+ Purpose: bcm_console_print is registered for printk.
+ The console_lock must be held when we get here.
+-------------------------------------------------------------------------- */
+static void bcm_console_print (struct console * cons, const char * str,
+ unsigned int count)
+{
+ unsigned int i;
+ //_puts(str);
+ for(i=0; i<count; i++, str++)
+ {
+ _putc(*str);
+ if (*str == 10)
+ {
+ _putc(13);
+ }
+ }
+}
+
+static struct tty_driver * bcm_console_device(struct console * c, int *index)
+{
+ *index = c->index;
+ return serial_driver;
+}
+
+static int __init bcm_console_setup(struct console * co, char * options)
+{
+ return 0;
+}
+
+static struct console bcm_sercons = {
+ .name = "ttyS",
+ .write = bcm_console_print,
+ .device = bcm_console_device,
+ .setup = bcm_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+static int __init bcm63xx_console_init(void)
+{
+ register_console(&bcm_sercons);
+ return 0;
+}
+
+console_initcall(bcm63xx_console_init);
diff -urN linux-2.6.19/include/asm-mips/bootinfo.h linux-2.6.19.new/include/asm-mips/bootinfo.h
--- linux-2.6.19/include/asm-mips/bootinfo.h 2006-11-29 22:57:37.000000000 +0100
+++ linux-2.6.19.new/include/asm-mips/bootinfo.h 2006-12-16 18:46:31.000000000 +0100
@@ -212,6 +212,14 @@
#define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */
#define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */
+/*
+ * Valid machtype for group BRCM
+ */
+#define MACH_GROUP_BRCM 23 /* Broadcom boards */
+#define MACH_BCM96338 0
+#define MACH_BCM96345 1
+#define MACH_BCM96348 2
+
#define CL_SIZE COMMAND_LINE_SIZE
const char *get_system_type(void);
diff -urN linux-2.6.19/include/asm-mips/cpu.h linux-2.6.19.new/include/asm-mips/cpu.h
--- linux-2.6.19/include/asm-mips/cpu.h 2006-11-29 22:57:37.000000000 +0100
+++ linux-2.6.19.new/include/asm-mips/cpu.h 2006-12-16 18:46:31.000000000 +0100
@@ -103,6 +103,13 @@
#define PRID_IMP_SR71000 0x0400
+/* These are the PRID's for when 23:16 == PRID_COMP_BROADCOM
+ */
+
+#define PRID_IMP_BCM6338 0x9000
+#define PRID_IMP_BCM6345 0x8000
+#define PRID_IMP_BCM6348 0x9100
+
/*
* Definitions for 7:0 on legacy processors
*/
@@ -200,7 +207,10 @@
#define CPU_SB1A 62
#define CPU_74K 63
#define CPU_R14000 64
-#define CPU_LAST 64
+#define CPU_BCM6338 65
+#define CPU_BCM6345 66
+#define CPU_BCM6348 67
+#define CPU_LAST 67
/*
* ISA Level encodings
diff -urN linux-2.6.19/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h linux-2.6.19.new/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h
--- linux-2.6.19/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.19.new/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 2006-12-16 18:52:30.000000000 +0100
@@ -0,0 +1,36 @@
+#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_tlb 1
+#define cpu_has_4kex 4
+#define cpu_has_4ktlb 8
+#define cpu_has_fpu 0
+#define cpu_has_32fpr 0
+#define cpu_has_counter 0x40
+#define cpu_has_watch 0
+#define cpu_has_mips16 0
+#define cpu_has_divec 0x200
+#define cpu_has_vce 0
+#define cpu_has_cache_cdex_p 0
+#define cpu_has_cache_cdex_s 0
+#define cpu_has_prefetch 0x40000
+#define cpu_has_mcheck 0x2000
+#define cpu_has_ejtag 0x4000
+#define cpu_has_llsc 0x10000
+#define cpu_has_vtag_icache 0
+#define cpu_has_dc_aliases 0
+#define cpu_has_ic_fills_f_dc 0
+
+#define cpu_has_nofpuex 0
+#define cpu_has_64bits 0
+#define cpu_has_64bit_zero_reg 0
+#define cpu_has_64bit_gp_regs 0
+#define cpu_has_64bit_addresses 0
+
+#define cpu_has_subset_pcaches 0
+
+#define cpu_dcache_line_size() 16
+#define cpu_icache_line_size() 16
+#define cpu_scache_line_size() 0
+
+#endif /* __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H */
diff -urN linux-2.6.19/include/asm-mips/module.h linux-2.6.19.new/include/asm-mips/module.h
--- linux-2.6.19/include/asm-mips/module.h 2006-11-29 22:57:37.000000000 +0100
+++ linux-2.6.19.new/include/asm-mips/module.h 2006-12-16 19:03:22.000000000 +0100
@@ -112,6 +112,12 @@
#define MODULE_PROC_FAMILY "RM9000 "
#elif defined CONFIG_CPU_SB1
#define MODULE_PROC_FAMILY "SB1 "
+#elif defined CONFIG_CPU_BCM6338
+#define MODULE_PROC_FAMILY "BCM6338 "
+#elif defined CONFIG_CPU_BCM6345
+#define MODULE_PROC_FAMILY "BCM6345 "
+#elif defined CONFIG_CPU_BCM6348
+#define MODULE_PROC_FAMILY "BCM6348 "
#else
#error MODULE_PROC_FAMILY undefined for your processor configuration
#endif
View Git Blame Copy Permalink