mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-05 16:34:04 +02:00
316a885776
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11209 3c298f89-4303-0410-b956-a3cf2f4a3e73
204 lines
6.1 KiB
Diff
204 lines
6.1 KiB
Diff
Index: linux-2.6.21.7/drivers/net/Kconfig
|
|
===================================================================
|
|
--- linux-2.6.21.7.orig/drivers/net/Kconfig
|
|
+++ linux-2.6.21.7/drivers/net/Kconfig
|
|
@@ -959,6 +959,12 @@ config SMC91X
|
|
module, say M here and read <file:Documentation/modules.txt> as well
|
|
as <file:Documentation/networking/net-modules.txt>.
|
|
|
|
+config SMC91X_GUMSTIX
|
|
+ tristate
|
|
+ default m if SMC91X=m
|
|
+ default y if SMC91X=y
|
|
+ depends on SMC91X && ARCH_GUMSTIX
|
|
+
|
|
config SMC9194
|
|
tristate "SMC 9194 support"
|
|
depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
|
|
Index: linux-2.6.21.7/drivers/net/Makefile
|
|
===================================================================
|
|
--- linux-2.6.21.7.orig/drivers/net/Makefile
|
|
+++ linux-2.6.21.7/drivers/net/Makefile
|
|
@@ -201,6 +201,7 @@ obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
|
|
|
|
obj-$(CONFIG_MACB) += macb.o
|
|
|
|
+obj-$(CONFIG_SMC91X_GUMSTIX) += gumstix-smc91x.o
|
|
obj-$(CONFIG_ARM) += arm/
|
|
obj-$(CONFIG_DEV_APPLETALK) += appletalk/
|
|
obj-$(CONFIG_TR) += tokenring/
|
|
Index: linux-2.6.21.7/drivers/net/smc91x.c
|
|
===================================================================
|
|
--- linux-2.6.21.7.orig/drivers/net/smc91x.c
|
|
+++ linux-2.6.21.7/drivers/net/smc91x.c
|
|
@@ -2373,6 +2373,10 @@ static struct platform_driver smc_driver
|
|
},
|
|
};
|
|
|
|
+#ifdef CONFIG_ARCH_GUMSTIX
|
|
+extern void gumstix_smc91x_load(void);
|
|
+#endif
|
|
+
|
|
static int __init smc_init(void)
|
|
{
|
|
#ifdef MODULE
|
|
@@ -2384,6 +2388,10 @@ static int __init smc_init(void)
|
|
#endif
|
|
#endif
|
|
|
|
+#ifdef CONFIG_ARCH_GUMSTIX
|
|
+ gumstix_smc91x_load();
|
|
+#endif
|
|
+
|
|
return platform_driver_register(&smc_driver);
|
|
}
|
|
|
|
Index: linux-2.6.21.7/drivers/net/gumstix-smc91x.c
|
|
===================================================================
|
|
--- /dev/null
|
|
+++ linux-2.6.21.7/drivers/net/gumstix-smc91x.c
|
|
@@ -0,0 +1,143 @@
|
|
+/*
|
|
+ * Gumstix SMC91C111 chip intialization driver
|
|
+ *
|
|
+ * Author: Craig Hughes
|
|
+ * Created: December 9, 2004
|
|
+ * Copyright: (C) 2004 Craig Hughes
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/device.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/delay.h>
|
|
+
|
|
+#include <asm/hardware.h>
|
|
+#include <asm/arch/pxa-regs.h>
|
|
+#include <asm/delay.h>
|
|
+
|
|
+#include <asm/arch/gumstix.h>
|
|
+
|
|
+#define SMC_DEBUG 0
|
|
+#include <asm/io.h>
|
|
+#include "smc91x.h"
|
|
+
|
|
+static struct resource gumstix_smc91x0_resources[] = {
|
|
+ [0] = {
|
|
+ .name = "smc91x-regs",
|
|
+ .start = PXA_CS1_PHYS + 0x00000300,
|
|
+ .end = PXA_CS1_PHYS + 0x000fffff,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = GUMSTIX_ETH0_IRQ,
|
|
+ .end = GUMSTIX_ETH0_IRQ,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct resource gumstix_smc91x1_resources[] = {
|
|
+ [0] = {
|
|
+ .name = "smc91x-regs",
|
|
+ .start = PXA_CS2_PHYS + 0x00000300,
|
|
+ .end = PXA_CS2_PHYS + 0x000fffff,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = GUMSTIX_ETH1_IRQ,
|
|
+ .end = GUMSTIX_ETH1_IRQ,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device gumstix_smc91x0_device = {
|
|
+ .name = "smc91x",
|
|
+ .id = 0,
|
|
+ .num_resources = ARRAY_SIZE(gumstix_smc91x0_resources),
|
|
+ .resource = gumstix_smc91x0_resources,
|
|
+};
|
|
+
|
|
+static struct platform_device gumstix_smc91x1_device = {
|
|
+ .name = "smc91x",
|
|
+ .id = 1,
|
|
+ .num_resources = ARRAY_SIZE(gumstix_smc91x1_resources),
|
|
+ .resource = gumstix_smc91x1_resources,
|
|
+};
|
|
+
|
|
+static struct platform_device *smc91x_devices[] = {
|
|
+ &gumstix_smc91x0_device,
|
|
+ &gumstix_smc91x1_device,
|
|
+};
|
|
+
|
|
+/* First we're going to test if there's a 2nd SMC91C111, and if not, then we'll free up those resources and the GPIO lines
|
|
+ * that it would otherwise use. We have no choice but to probe by doing:
|
|
+ * Set nCS2 to CS2 mode
|
|
+ * Set the reset line to GPIO out mode, and pull it high, then drop it low (to trigger reset)
|
|
+ * Read from the memory space to check for the sentinel sequence identifying a likely SMC91C111 device
|
|
+ */
|
|
+int __init gumstix_smc91x_init(void)
|
|
+{
|
|
+ unsigned int val, num_devices=ARRAY_SIZE(smc91x_devices);
|
|
+ void *ioaddr;
|
|
+
|
|
+ /* Set up nPWE */
|
|
+ pxa_gpio_mode(GPIO49_nPWE_MD);
|
|
+
|
|
+ pxa_gpio_mode(GPIO78_nCS_2_MD);
|
|
+ // If either if statement fails, then we'll drop out and turn_off_eth1,
|
|
+ // if both succeed, then we'll skip that and just proceed with 2 cards
|
|
+ if(request_mem_region(gumstix_smc91x1_resources[0].start, SMC_IO_EXTENT, "smc91x probe"))
|
|
+ {
|
|
+ ioaddr = ioremap(gumstix_smc91x1_resources[0].start, SMC_IO_EXTENT);
|
|
+ val = ioread16(ioaddr + BANK_SELECT);
|
|
+ iounmap(ioaddr);
|
|
+ release_mem_region(gumstix_smc91x1_resources[0].start, SMC_IO_EXTENT);
|
|
+ if ((val & 0xFF00) == 0x3300) {
|
|
+ goto proceed;
|
|
+ }
|
|
+ }
|
|
+
|
|
+turn_off_eth1:
|
|
+ // This is apparently not an SMC91C111
|
|
+ // So, let's decrement the number of devices to request, and reset the GPIO lines to GPIO IN mode
|
|
+ num_devices--;
|
|
+ smc91x_devices[1] = NULL;
|
|
+ pxa_gpio_mode(78 | GPIO_IN);
|
|
+
|
|
+proceed:
|
|
+ pxa_gpio_mode(GPIO15_nCS_1_MD);
|
|
+
|
|
+ if(smc91x_devices[1]) pxa_gpio_mode(GPIO_GUMSTIX_ETH1_RST_MD);
|
|
+ pxa_gpio_mode(GPIO_GUMSTIX_ETH0_RST_MD);
|
|
+ if(smc91x_devices[1]) GPSR(GPIO_GUMSTIX_ETH1_RST) = GPIO_bit(GPIO_GUMSTIX_ETH1_RST);
|
|
+ GPSR(GPIO_GUMSTIX_ETH0_RST) = GPIO_bit(GPIO_GUMSTIX_ETH0_RST);
|
|
+ udelay(1); // Hold RESET for at least 100ns
|
|
+ if(smc91x_devices[1]) GPCR(GPIO_GUMSTIX_ETH1_RST) = GPIO_bit(GPIO_GUMSTIX_ETH1_RST);
|
|
+ GPCR(GPIO_GUMSTIX_ETH0_RST) = GPIO_bit(GPIO_GUMSTIX_ETH0_RST);
|
|
+ msleep(50);
|
|
+
|
|
+ return platform_add_devices(smc91x_devices, num_devices);
|
|
+}
|
|
+
|
|
+void __exit gumstix_smc91x_exit(void)
|
|
+{
|
|
+ if(smc91x_devices[1] != NULL) platform_device_unregister(&gumstix_smc91x1_device);
|
|
+ platform_device_unregister(&gumstix_smc91x0_device);
|
|
+}
|
|
+
|
|
+void gumstix_smc91x_load(void) {}
|
|
+EXPORT_SYMBOL(gumstix_smc91x_load);
|
|
+
|
|
+module_init(gumstix_smc91x_init);
|
|
+module_exit(gumstix_smc91x_exit);
|
|
+
|
|
+MODULE_LICENSE("GPL");
|
|
+MODULE_AUTHOR("Craig Hughes <craig@gumstix.com>");
|
|
+MODULE_DESCRIPTION("Gumstix board SMC91C111 chip initialization driver");
|
|
+MODULE_VERSION("1:0.1");
|