mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-28 18:30:37 +02:00
dc3d3f1c49
it's basically also provided by ingenic and nativly based on 2.6.27, adjusted to fit into the OpenWrt-environment
653 lines
15 KiB
C
653 lines
15 KiB
C
/*
|
|
* linux/drivers/net/jzcs8900a.c
|
|
*
|
|
* Author: Lucifer <yliu@ingenic>
|
|
*
|
|
* A Cirrus Logic CS8900A driver for Linux
|
|
* based on the cs89x0 driver written by Russell Nelson,
|
|
* Donald Becker, and others.
|
|
*
|
|
* This source code is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*/
|
|
|
|
/*
|
|
* At the moment the driver does not support memory mode operation.
|
|
* It is trivial to implement this, but not worth the effort.
|
|
*/
|
|
|
|
/*
|
|
* TODO:
|
|
*
|
|
* 1. If !ready in send_start(), queue buffer and send it in interrupt handler
|
|
* when we receive a BufEvent with Rdy4Tx, send it again. dangerous!
|
|
* 2. how do we prevent interrupt handler destroying integrity of get_stats()?
|
|
* 3. Change reset code to check status.
|
|
* 4. Implement set_mac_address and remove fake mac address
|
|
* 5. Link status detection stuff
|
|
* 6. Write utility to write EEPROM, do self testing, etc.
|
|
* 7. Implement DMA routines (I need a board w/ DMA support for that)
|
|
* 8. Power management
|
|
* 9. Add support for multiple ethernet chips
|
|
* 10. Add support for other cs89xx chips (need hardware for that)
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/in.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/bitops.h>
|
|
#include <asm/io.h>
|
|
#include <asm/jzsoc.h>
|
|
|
|
#include "jzcs8900a.h"
|
|
|
|
#define FULL_DUPLEX
|
|
#define INT_PIN 0
|
|
|
|
/*
|
|
* IO address and irq pin
|
|
*/
|
|
#ifdef CONFIG_SOC_JZ4740
|
|
#define GPIO_NET_INT (32*1+27) /* GPB27 */
|
|
#define CIRRUS_DEFAULT_IO 0xa8000000
|
|
#define CIRRUS_DEFAULT_IRQ (GPIO_NET_INT + IRQ_GPIO_0)
|
|
#endif /* CONFIG_SOC_JZ4740*/
|
|
|
|
#ifdef CONFIG_SOC_JZ4750
|
|
#define CIRRUS_DEFAULT_IO 0xac000000
|
|
#define CIRRUS_DEFAULT_IRQ (GPIO_NET_INT + IRQ_GPIO_0)
|
|
#endif /* CONFIG_SOC_JZ4750 */
|
|
|
|
typedef struct {
|
|
struct net_device_stats stats;
|
|
u16 txlen;
|
|
} cirrus_t;
|
|
|
|
static int ethaddr_cmd = 0;
|
|
static unsigned char ethaddr_hex[6];
|
|
static struct net_device *dev;
|
|
|
|
/*
|
|
* I/O routines
|
|
*/
|
|
static void gpio_init_cs8900(void)
|
|
{
|
|
#ifdef CONFIG_SOC_JZ4740
|
|
/* We use CS4 with 16-bit data width */
|
|
__gpio_as_func0(60); /* CS4# */
|
|
__gpio_as_func0(61); /* RD# */
|
|
__gpio_as_func0(62); /* WR# */
|
|
|
|
REG_EMC_SMCR4 &= ~EMC_SMCR_BW_MASK; /* 16bit */
|
|
REG_EMC_SMCR4 |= EMC_SMCR_BW_16BIT; /* 16bit */
|
|
|
|
#endif /* CONFIG_SOC_JZ4740 */
|
|
|
|
#ifdef CONFIG_SOC_JZ4750
|
|
/* We use CS3 with 16-bit data width */
|
|
__gpio_as_func0(32*2+23); /* CS3# */
|
|
__gpio_as_func0(32*2+25); /* RD# */
|
|
__gpio_as_func0(32*2+26); /* WR# */
|
|
|
|
REG_EMC_SMCR3 &= ~EMC_SMCR_BW_MASK;
|
|
REG_EMC_SMCR3 |= EMC_SMCR_BW_16BIT;
|
|
#endif /* CONFIG_SOC_JZ4750 */
|
|
|
|
__gpio_as_irq_high_level(GPIO_NET_INT); /* irq */
|
|
__gpio_disable_pull(GPIO_NET_INT); /* disable pull */
|
|
}
|
|
|
|
static inline u16 cirrus_read (struct net_device *dev,u16 reg)
|
|
{
|
|
outw (reg,dev->base_addr + PP_Address);
|
|
return (inw (dev->base_addr + PP_Data));
|
|
}
|
|
|
|
static inline void cirrus_write (struct net_device *dev,u16 reg,u16 value)
|
|
{
|
|
outw (reg,dev->base_addr + PP_Address);
|
|
outw (value,dev->base_addr + PP_Data);
|
|
}
|
|
|
|
static inline void cirrus_set (struct net_device *dev,u16 reg,u16 value)
|
|
{
|
|
cirrus_write (dev,reg,cirrus_read (dev,reg) | value);
|
|
}
|
|
|
|
static inline void cirrus_clear (struct net_device *dev,u16 reg,u16 value)
|
|
{
|
|
cirrus_write (dev,reg,cirrus_read (dev,reg) & ~value);
|
|
}
|
|
|
|
static inline void cirrus_frame_read (struct net_device *dev,struct sk_buff *skb,u16 length)
|
|
{
|
|
insw (dev->base_addr,skb_put (skb,length),(length + 1) / 2);
|
|
}
|
|
|
|
static inline void cirrus_frame_write (struct net_device *dev,struct sk_buff *skb)
|
|
{
|
|
outsw (dev->base_addr,skb->data,(skb->len + 1) / 2);
|
|
}
|
|
|
|
/*
|
|
* Debugging functions
|
|
*/
|
|
|
|
#ifdef DEBUG
|
|
static inline int printable (int c)
|
|
{
|
|
return ((c >= 32 && c <= 126) ||
|
|
(c >= 174 && c <= 223) ||
|
|
(c >= 242 && c <= 243) ||
|
|
(c >= 252 && c <= 253));
|
|
}
|
|
|
|
static void dump16 (struct net_device *dev,const u8 *s,size_t len)
|
|
{
|
|
int i;
|
|
char str[128];
|
|
|
|
if (!len) return;
|
|
|
|
*str = '\0';
|
|
|
|
for (i = 0; i < len; i++) {
|
|
if (i && !(i % 4)) strcat (str," ");
|
|
sprintf (str,"%s%.2x ",str,s[i]);
|
|
}
|
|
|
|
for ( ; i < 16; i++) {
|
|
if (i && !(i % 4)) strcat (str," ");
|
|
strcat (str," ");
|
|
}
|
|
|
|
strcat (str," ");
|
|
for (i = 0; i < len; i++) sprintf (str,"%s%c",str,printable (s[i]) ? s[i] : '.');
|
|
|
|
printk (KERN_DEBUG "%s: %s\n",dev->name,str);
|
|
}
|
|
|
|
static void hexdump (struct net_device *dev,const void *ptr,size_t size)
|
|
{
|
|
const u8 *s = (u8 *) ptr;
|
|
int i;
|
|
for (i = 0; i < size / 16; i++, s += 16) dump16 (dev,s,16);
|
|
dump16 (dev,s,size % 16);
|
|
}
|
|
|
|
static void dump_packet (struct net_device *dev,struct sk_buff *skb,const char *type)
|
|
{
|
|
printk (KERN_INFO "%s: %s %d byte frame %.2x:%.2x:%.2x:%.2x:%.2x:%.2x to %.2x:%.2x:%.2x:%.2x:%.2x:%.2x type %.4x\n",
|
|
dev->name,
|
|
type,
|
|
skb->len,
|
|
skb->data[0],skb->data[1],skb->data[2],skb->data[3],skb->data[4],skb->data[5],
|
|
skb->data[6],skb->data[7],skb->data[8],skb->data[9],skb->data[10],skb->data[11],
|
|
(skb->data[12] << 8) | skb->data[13]);
|
|
if (skb->len < 0x100) hexdump (dev,skb->data,skb->len);
|
|
}
|
|
#endif /* #ifdef DEBUG */
|
|
|
|
/*
|
|
* Driver functions
|
|
*/
|
|
|
|
static void cirrus_receive (struct net_device *dev)
|
|
{
|
|
cirrus_t *priv = (cirrus_t *) dev->priv;
|
|
struct sk_buff *skb;
|
|
u16 status,length;
|
|
|
|
status = cirrus_read (dev,PP_RxStatus);
|
|
length = cirrus_read (dev,PP_RxLength);
|
|
|
|
if (!(status & RxOK)) {
|
|
priv->stats.rx_errors++;
|
|
if ((status & (Runt | Extradata))) priv->stats.rx_length_errors++;
|
|
if ((status & CRCerror)) priv->stats.rx_crc_errors++;
|
|
return;
|
|
}
|
|
|
|
if ((skb = dev_alloc_skb (length + 4)) == NULL) {
|
|
priv->stats.rx_dropped++;
|
|
return;
|
|
}
|
|
|
|
skb->dev = dev;
|
|
skb_reserve (skb,2);
|
|
|
|
cirrus_frame_read (dev,skb,length);
|
|
skb->protocol = eth_type_trans (skb,dev);
|
|
|
|
netif_rx (skb);
|
|
dev->last_rx = jiffies;
|
|
|
|
priv->stats.rx_packets++;
|
|
priv->stats.rx_bytes += length;
|
|
}
|
|
|
|
static int cirrus_send_start (struct sk_buff *skb,struct net_device *dev)
|
|
{
|
|
cirrus_t *priv = (cirrus_t *) dev->priv;
|
|
u16 status;
|
|
|
|
mdelay(10);
|
|
netif_stop_queue (dev);
|
|
|
|
cirrus_write (dev,PP_TxCMD,TxStart (After5));
|
|
cirrus_write (dev,PP_TxLength,skb->len);
|
|
|
|
status = cirrus_read (dev,PP_BusST);
|
|
|
|
if ((status & TxBidErr)) {
|
|
printk (KERN_WARNING "%s: Invalid frame size %d!\n",dev->name,skb->len);
|
|
priv->stats.tx_errors++;
|
|
priv->stats.tx_aborted_errors++;
|
|
priv->txlen = 0;
|
|
return (1);
|
|
}
|
|
|
|
if (!(status & Rdy4TxNOW)) {
|
|
//printk (KERN_WARNING "%s: Transmit buffer not free!\n",dev->name);
|
|
priv->stats.tx_errors++;
|
|
priv->txlen = 0;
|
|
/* FIXME: store skb and send it in interrupt handler */
|
|
return (1);
|
|
}
|
|
|
|
cirrus_frame_write (dev,skb);
|
|
dev->trans_start = jiffies;
|
|
|
|
dev_kfree_skb (skb);
|
|
|
|
priv->txlen = skb->len;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static irqreturn_t cirrus_interrupt(int irq, void *id)
|
|
{
|
|
struct net_device *dev = (struct net_device *) id;
|
|
cirrus_t *priv;
|
|
u16 status;
|
|
|
|
if (dev->priv == NULL) {
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
priv = (cirrus_t *) dev->priv;
|
|
|
|
while ((status = cirrus_read (dev,PP_ISQ))) {
|
|
switch (RegNum (status)) {
|
|
case RxEvent:
|
|
cirrus_receive (dev);
|
|
break;
|
|
|
|
case TxEvent:
|
|
priv->stats.collisions += ColCount (cirrus_read (dev,PP_TxCOL));
|
|
if (!(RegContent (status) & TxOK)) {
|
|
priv->stats.tx_errors++;
|
|
if ((RegContent (status) & Out_of_window)) priv->stats.tx_window_errors++;
|
|
if ((RegContent (status) & Jabber)) priv->stats.tx_aborted_errors++;
|
|
break;
|
|
} else if (priv->txlen) {
|
|
priv->stats.tx_packets++;
|
|
priv->stats.tx_bytes += priv->txlen;
|
|
}
|
|
priv->txlen = 0;
|
|
netif_wake_queue (dev);
|
|
break;
|
|
|
|
case BufEvent:
|
|
if ((RegContent (status) & RxMiss)) {
|
|
u16 missed = MissCount (cirrus_read (dev,PP_RxMISS));
|
|
priv->stats.rx_errors += missed;
|
|
priv->stats.rx_missed_errors += missed;
|
|
}
|
|
if ((RegContent (status) & TxUnderrun)) {
|
|
priv->stats.tx_errors++;
|
|
priv->stats.tx_fifo_errors++;
|
|
}
|
|
/* FIXME: if Rdy4Tx, transmit last sent packet (if any) */
|
|
priv->txlen = 0;
|
|
netif_wake_queue (dev);
|
|
break;
|
|
|
|
case TxCOL:
|
|
priv->stats.collisions += ColCount (cirrus_read (dev,PP_TxCOL));
|
|
break;
|
|
|
|
case RxMISS:
|
|
status = MissCount (cirrus_read (dev,PP_RxMISS));
|
|
priv->stats.rx_errors += status;
|
|
priv->stats.rx_missed_errors += status;
|
|
break;
|
|
default:
|
|
return IRQ_HANDLED;
|
|
}
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void cirrus_transmit_timeout (struct net_device *dev)
|
|
{
|
|
cirrus_t *priv = (cirrus_t *) dev->priv;
|
|
priv->stats.tx_errors++;
|
|
priv->stats.tx_heartbeat_errors++;
|
|
priv->txlen = 0;
|
|
netif_wake_queue (dev);
|
|
}
|
|
|
|
static int cirrus_start (struct net_device *dev)
|
|
{
|
|
int result;
|
|
|
|
/* valid ethernet address? */
|
|
if (!is_valid_ether_addr(dev->dev_addr)) {
|
|
printk(KERN_ERR "%s: invalid ethernet MAC address\n",dev->name);
|
|
return (-EINVAL);
|
|
}
|
|
|
|
/* install interrupt handler */
|
|
if ((result = request_irq (dev->irq, &cirrus_interrupt, IRQF_DISABLED, dev->name, dev)) < 0) {
|
|
printk (KERN_ERR "%s: could not register interrupt %d\n",dev->name,dev->irq);
|
|
return (result);
|
|
}
|
|
|
|
/* enable the ethernet controller */
|
|
cirrus_set (dev,PP_RxCFG,RxOKiE | BufferCRC | CRCerroriE | RuntiE | ExtradataiE);
|
|
cirrus_set (dev,PP_RxCTL,RxOKA | IndividualA | BroadcastA);
|
|
cirrus_set (dev,PP_TxCFG,TxOKiE | Out_of_windowiE | JabberiE);
|
|
cirrus_set (dev,PP_BufCFG,Rdy4TxiE | RxMissiE | TxUnderruniE | TxColOvfiE | MissOvfloiE);
|
|
cirrus_set (dev,PP_LineCTL,SerRxON | SerTxON);
|
|
cirrus_set (dev,PP_BusCTL,EnableRQ);
|
|
|
|
#ifdef FULL_DUPLEX
|
|
cirrus_set (dev,PP_TestCTL,FDX);
|
|
#endif /* #ifdef FULL_DUPLEX */
|
|
|
|
/* start the queue */
|
|
netif_start_queue (dev);
|
|
|
|
/* enable irq */
|
|
__gpio_unmask_irq(GPIO_NET_INT);
|
|
|
|
//MOD_INC_USE_COUNT;
|
|
return (0);
|
|
}
|
|
|
|
static int cirrus_stop (struct net_device *dev)
|
|
{
|
|
/* disable irq */
|
|
__gpio_mask_irq(GPIO_NET_INT);
|
|
|
|
/* disable ethernet controller */
|
|
cirrus_write (dev,PP_BusCTL,0);
|
|
cirrus_write (dev,PP_TestCTL,0);
|
|
cirrus_write (dev,PP_SelfCTL,0);
|
|
cirrus_write (dev,PP_LineCTL,0);
|
|
cirrus_write (dev,PP_BufCFG,0);
|
|
cirrus_write (dev,PP_TxCFG,0);
|
|
cirrus_write (dev,PP_RxCTL,0);
|
|
cirrus_write (dev,PP_RxCFG,0);
|
|
|
|
/* uninstall interrupt handler */
|
|
free_irq (dev->irq,dev);
|
|
|
|
/* stop the queue */
|
|
netif_stop_queue (dev);
|
|
|
|
//MOD_DEC_USE_COUNT;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int cirrus_set_mac_address (struct net_device *dev, void *p)
|
|
{
|
|
struct sockaddr *addr = (struct sockaddr *)p;
|
|
int i;
|
|
|
|
if (netif_running(dev))
|
|
return -EBUSY;
|
|
|
|
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
|
|
|
|
/* configure MAC address */
|
|
for (i = 0; i < ETH_ALEN; i += 2)
|
|
cirrus_write (dev,PP_IA + i,dev->dev_addr[i] | (dev->dev_addr[i + 1] << 8));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct net_device_stats *cirrus_get_stats (struct net_device *dev)
|
|
{
|
|
cirrus_t *priv = (cirrus_t *) dev->priv;
|
|
return (&priv->stats);
|
|
}
|
|
|
|
static void cirrus_set_receive_mode (struct net_device *dev)
|
|
{
|
|
if ((dev->flags & IFF_PROMISC))
|
|
cirrus_set (dev,PP_RxCTL,PromiscuousA);
|
|
else
|
|
cirrus_clear (dev,PP_RxCTL,PromiscuousA);
|
|
|
|
if ((dev->flags & IFF_ALLMULTI) && dev->mc_list)
|
|
cirrus_set (dev,PP_RxCTL,MulticastA);
|
|
else
|
|
cirrus_clear (dev,PP_RxCTL,MulticastA);
|
|
}
|
|
|
|
/*
|
|
* Architecture dependant code
|
|
*/
|
|
|
|
/*
|
|
* Driver initialization routines
|
|
*/
|
|
|
|
int __init cirrus_probe(void)
|
|
{
|
|
static cirrus_t priv;
|
|
int i;
|
|
u16 value;
|
|
|
|
printk ("Jz CS8900A driver for Linux (V0.02)\n");
|
|
|
|
/* Init hardware for PAVO board */
|
|
gpio_init_cs8900();
|
|
|
|
/* Allocate ethernet device */
|
|
dev = alloc_etherdev(sizeof(struct net_device));
|
|
|
|
memset (&priv,0,sizeof (cirrus_t));
|
|
|
|
ether_setup (dev);
|
|
|
|
dev->open = cirrus_start;
|
|
dev->stop = cirrus_stop;
|
|
dev->hard_start_xmit = cirrus_send_start;
|
|
dev->get_stats = cirrus_get_stats;
|
|
dev->set_multicast_list = cirrus_set_receive_mode;
|
|
dev->set_mac_address = cirrus_set_mac_address;
|
|
dev->tx_timeout = cirrus_transmit_timeout;
|
|
dev->watchdog_timeo = 5 * HZ;
|
|
|
|
if (ethaddr_cmd==1)
|
|
{
|
|
dev->dev_addr[0] = ethaddr_hex[0];
|
|
dev->dev_addr[1] = ethaddr_hex[1];
|
|
dev->dev_addr[2] = ethaddr_hex[2];
|
|
dev->dev_addr[3] = ethaddr_hex[3];
|
|
dev->dev_addr[4] = ethaddr_hex[4];
|
|
dev->dev_addr[5] = ethaddr_hex[5];
|
|
}
|
|
else //default mac address 00:2a:cc:2a:af:fe
|
|
{
|
|
dev->dev_addr[0] = 0x00;
|
|
dev->dev_addr[1] = 0x62;
|
|
dev->dev_addr[2] = 0x9c;
|
|
dev->dev_addr[3] = 0x61;
|
|
dev->dev_addr[4] = 0xcf;
|
|
dev->dev_addr[5] = 0x16;
|
|
}
|
|
dev->if_port = IF_PORT_10BASET;
|
|
dev->priv = (void *) &priv;
|
|
|
|
dev->base_addr = CIRRUS_DEFAULT_IO;
|
|
dev->irq = CIRRUS_DEFAULT_IRQ;
|
|
|
|
|
|
/* module parameters override everything */
|
|
if (!dev->base_addr) {
|
|
printk (KERN_ERR
|
|
"%s: No default I/O base address defined. Use io=... or\n"
|
|
"%s: define CIRRUS_DEFAULT_IO for your platform\n",
|
|
dev->name,dev->name);
|
|
return (-EINVAL);
|
|
}
|
|
|
|
if (!dev->irq) {
|
|
printk (KERN_ERR
|
|
"%s: No default IRQ number defined. Use irq=... or\n"
|
|
"%s: define CIRRUS_DEFAULT_IRQ for your platform\n",
|
|
dev->name,dev->name);
|
|
return (-EINVAL);
|
|
}
|
|
#if 0
|
|
if ((result = check_region (dev->base_addr,16))) {
|
|
printk (KERN_ERR "%s: can't get I/O port address 0x%lx\n",dev->name,dev->base_addr);
|
|
return (result);
|
|
}
|
|
#endif
|
|
if (!request_region (dev->base_addr,16,dev->name))
|
|
return -EBUSY;
|
|
#if 0
|
|
/* verify EISA registration number for Cirrus Logic */
|
|
if ((value = cirrus_read (dev,PP_ProductID)) != EISA_REG_CODE) {
|
|
printk (KERN_ERR "%s: incorrect signature 0x%.4x\n",dev->name,value);
|
|
return (-ENXIO);
|
|
}
|
|
#endif
|
|
|
|
/* verify chip version */
|
|
value = cirrus_read (dev,PP_ProductID + 2);
|
|
if (VERSION (value) != CS8900A) {
|
|
printk (KERN_ERR "%s: unknown chip version 0x%.8x\n",dev->name,VERSION (value));
|
|
return (-ENXIO);
|
|
}
|
|
printk (KERN_INFO "%s: CS8900A rev %c detected\n",dev->name,'B' + REVISION (value) - REV_B);
|
|
|
|
/* setup interrupt number */
|
|
cirrus_write (dev,PP_IntNum,INT_PIN);
|
|
|
|
/* configure MAC address */
|
|
for (i = 0; i < ETH_ALEN; i += 2)
|
|
{
|
|
//printk(" %x",dev->dev_addr[i] | (dev->dev_addr[i + 1] << 8));
|
|
cirrus_write (dev,PP_IA + i,dev->dev_addr[i] | (dev->dev_addr[i + 1] << 8));
|
|
}
|
|
|
|
if (register_netdev(dev) != 0) {
|
|
printk(KERN_ERR " Cannot register net device\n");
|
|
free_netdev(dev);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static inline unsigned char str2hexnum(unsigned char c)
|
|
{
|
|
if(c >= '0' && c <= '9')
|
|
return c - '0';
|
|
if(c >= 'a' && c <= 'f')
|
|
return c - 'a' + 10;
|
|
if(c >= 'A' && c <= 'F')
|
|
return c - 'A' + 10;
|
|
return 0; /* foo */
|
|
}
|
|
|
|
static inline void str2eaddr(unsigned char *ea, unsigned char *str)
|
|
{
|
|
int i;
|
|
|
|
for(i = 0; i < 6; i++) {
|
|
unsigned char num;
|
|
|
|
if((*str == '.') || (*str == ':'))
|
|
str++;
|
|
num = str2hexnum(*str++) << 4;
|
|
num |= (str2hexnum(*str++));
|
|
ea[i] = num;
|
|
}
|
|
}
|
|
|
|
static int __init ethernet_addr_setup(char *str)
|
|
{
|
|
if (!str) {
|
|
printk("ethaddr not set in command line\n");
|
|
return -1;
|
|
}
|
|
ethaddr_cmd = 1;
|
|
str2eaddr(ethaddr_hex, str);
|
|
return 0;
|
|
}
|
|
|
|
__setup("ethaddr=", ethernet_addr_setup);
|
|
|
|
//EXPORT_NO_SYMBOLS;
|
|
|
|
MODULE_AUTHOR ("Lucifer <yliu@ingenic.com>");
|
|
MODULE_DESCRIPTION ("Jz CS8900A driver for Linux (V0.02)");
|
|
MODULE_LICENSE ("GPL");
|
|
|
|
//#ifdef MODULE
|
|
|
|
|
|
#if 0
|
|
static int io = 0;
|
|
static int irq = 0;
|
|
|
|
module_param(io, int, 0);
|
|
MODULE_PARM_DESC (io,"I/O Base Address");
|
|
//MODULE_PARM (io,"i");
|
|
|
|
module_param(irq, int, 0);
|
|
MODULE_PARM_DESC (irq,"IRQ Number");
|
|
//MODULE_PARM (irq,"i");
|
|
#endif
|
|
|
|
static int __init jzcs8900_init(void)
|
|
{
|
|
if (cirrus_probe()) {
|
|
printk(KERN_WARNING "jzcs8900: No cs8900a found\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit jzcs8900_exit(void)
|
|
{
|
|
release_region(dev->base_addr,16);
|
|
unregister_netdev(dev);
|
|
free_netdev(dev);
|
|
}
|
|
|
|
module_init(jzcs8900_init);
|
|
module_exit(jzcs8900_exit);
|