mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-09-12 13:23:39 +03:00
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18022 3c298f89-4303-0410-b956-a3cf2f4a3e73
559 lines
19 KiB
Diff
559 lines
19 KiB
Diff
--- a/drivers/ssb/driver_chipcommon_pmu.c
|
|
+++ b/drivers/ssb/driver_chipcommon_pmu.c
|
|
@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct
|
|
chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value);
|
|
}
|
|
|
|
+static void ssb_chipco_regctl_maskset(struct ssb_chipcommon *cc,
|
|
+ u32 offset, u32 mask, u32 set)
|
|
+{
|
|
+ u32 value;
|
|
+
|
|
+ chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR);
|
|
+ chipco_write32(cc, SSB_CHIPCO_REGCTL_ADDR, offset);
|
|
+ chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR);
|
|
+ value = chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA);
|
|
+ value &= mask;
|
|
+ value |= set;
|
|
+ chipco_write32(cc, SSB_CHIPCO_REGCTL_DATA, value);
|
|
+ chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA);
|
|
+}
|
|
+
|
|
struct pmu0_plltab_entry {
|
|
u16 freq; /* Crystal frequency in kHz.*/
|
|
u8 xf; /* Crystal frequency value for PMU control */
|
|
@@ -506,3 +521,82 @@ void ssb_pmu_init(struct ssb_chipcommon
|
|
ssb_pmu_pll_init(cc);
|
|
ssb_pmu_resources_init(cc);
|
|
}
|
|
+
|
|
+void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
|
|
+ enum ssb_pmu_ldo_volt_id id, u32 voltage)
|
|
+{
|
|
+ struct ssb_bus *bus = cc->dev->bus;
|
|
+ u32 addr, shift, mask;
|
|
+
|
|
+ switch (bus->chip_id) {
|
|
+ case 0x4328:
|
|
+ case 0x5354:
|
|
+ switch (id) {
|
|
+ case LDO_VOLT1:
|
|
+ addr = 2;
|
|
+ shift = 25;
|
|
+ mask = 0xF;
|
|
+ break;
|
|
+ case LDO_VOLT2:
|
|
+ addr = 3;
|
|
+ shift = 1;
|
|
+ mask = 0xF;
|
|
+ break;
|
|
+ case LDO_VOLT3:
|
|
+ addr = 3;
|
|
+ shift = 9;
|
|
+ mask = 0xF;
|
|
+ break;
|
|
+ case LDO_PAREF:
|
|
+ addr = 3;
|
|
+ shift = 17;
|
|
+ mask = 0x3F;
|
|
+ break;
|
|
+ default:
|
|
+ SSB_WARN_ON(1);
|
|
+ return;
|
|
+ }
|
|
+ break;
|
|
+ case 0x4312:
|
|
+ if (SSB_WARN_ON(id != LDO_PAREF))
|
|
+ return;
|
|
+ addr = 0;
|
|
+ shift = 21;
|
|
+ mask = 0x3F;
|
|
+ break;
|
|
+ default:
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ ssb_chipco_regctl_maskset(cc, addr, ~(mask << shift),
|
|
+ (voltage & mask) << shift);
|
|
+}
|
|
+
|
|
+void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on)
|
|
+{
|
|
+ struct ssb_bus *bus = cc->dev->bus;
|
|
+ int ldo;
|
|
+
|
|
+ switch (bus->chip_id) {
|
|
+ case 0x4312:
|
|
+ ldo = SSB_PMURES_4312_PA_REF_LDO;
|
|
+ break;
|
|
+ case 0x4328:
|
|
+ ldo = SSB_PMURES_4328_PA_REF_LDO;
|
|
+ break;
|
|
+ case 0x5354:
|
|
+ ldo = SSB_PMURES_5354_PA_REF_LDO;
|
|
+ break;
|
|
+ default:
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ if (on)
|
|
+ chipco_set32(cc, SSB_CHIPCO_PMU_MINRES_MSK, 1 << ldo);
|
|
+ else
|
|
+ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ~(1 << ldo));
|
|
+ chipco_read32(cc, SSB_CHIPCO_PMU_MINRES_MSK); //SPEC FIXME found via mmiotrace - dummy read?
|
|
+}
|
|
+
|
|
+EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
|
|
+EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
|
|
--- a/drivers/ssb/main.c
|
|
+++ b/drivers/ssb/main.c
|
|
@@ -472,6 +472,8 @@ static int ssb_devices_register(struct s
|
|
case SSB_BUSTYPE_SSB:
|
|
dev->dma_mask = &dev->coherent_dma_mask;
|
|
break;
|
|
+ default:
|
|
+ break;
|
|
}
|
|
|
|
sdev->dev = dev;
|
|
@@ -1358,8 +1360,10 @@ static int __init ssb_modinit(void)
|
|
ssb_buses_lock();
|
|
err = ssb_attach_queued_buses();
|
|
ssb_buses_unlock();
|
|
- if (err)
|
|
+ if (err) {
|
|
bus_unregister(&ssb_bustype);
|
|
+ goto out;
|
|
+ }
|
|
|
|
err = b43_pci_ssb_bridge_init();
|
|
if (err) {
|
|
@@ -1375,7 +1379,7 @@ static int __init ssb_modinit(void)
|
|
/* don't fail SSB init because of this */
|
|
err = 0;
|
|
}
|
|
-
|
|
+out:
|
|
return err;
|
|
}
|
|
/* ssb must be initialized after PCI but before the ssb drivers.
|
|
--- a/drivers/ssb/pci.c
|
|
+++ b/drivers/ssb/pci.c
|
|
@@ -169,8 +169,14 @@ err_pci:
|
|
/* Get the word-offset for a SSB_SPROM_XXX define. */
|
|
#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16))
|
|
/* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
|
|
-#define SPEX(_outvar, _offset, _mask, _shift) \
|
|
+#define SPEX16(_outvar, _offset, _mask, _shift) \
|
|
out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
|
|
+#define SPEX32(_outvar, _offset, _mask, _shift) \
|
|
+ out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \
|
|
+ in[SPOFF(_offset)]) & (_mask)) >> (_shift))
|
|
+#define SPEX(_outvar, _offset, _mask, _shift) \
|
|
+ SPEX16(_outvar, _offset, _mask, _shift)
|
|
+
|
|
|
|
static inline u8 ssb_crc8(u8 crc, u8 data)
|
|
{
|
|
@@ -474,12 +480,14 @@ static void sprom_extract_r8(struct ssb_
|
|
|
|
/* extract the MAC address */
|
|
for (i = 0; i < 3; i++) {
|
|
- v = in[SPOFF(SSB_SPROM1_IL0MAC) + i];
|
|
+ v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
|
|
*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
|
|
}
|
|
SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
|
|
SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
|
|
SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
|
|
+ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
|
|
+ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0);
|
|
SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
|
|
SSB_SPROM8_ANTAVAIL_A_SHIFT);
|
|
SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
|
|
@@ -490,12 +498,55 @@ static void sprom_extract_r8(struct ssb_
|
|
SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
|
|
SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
|
|
SSB_SPROM8_ITSSI_A_SHIFT);
|
|
+ SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
|
|
+ SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
|
|
+ SSB_SPROM8_MAXP_AL_SHIFT);
|
|
SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
|
|
SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
|
|
SSB_SPROM8_GPIOA_P1_SHIFT);
|
|
SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
|
|
SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
|
|
SSB_SPROM8_GPIOB_P3_SHIFT);
|
|
+ SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
|
|
+ SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
|
|
+ SSB_SPROM8_TRI5G_SHIFT);
|
|
+ SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
|
|
+ SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
|
|
+ SSB_SPROM8_TRI5GH_SHIFT);
|
|
+ SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0);
|
|
+ SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
|
|
+ SSB_SPROM8_RXPO5G_SHIFT);
|
|
+ SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
|
|
+ SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
|
|
+ SSB_SPROM8_RSSISMC2G_SHIFT);
|
|
+ SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
|
|
+ SSB_SPROM8_RSSISAV2G_SHIFT);
|
|
+ SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
|
|
+ SSB_SPROM8_BXA2G_SHIFT);
|
|
+ SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
|
|
+ SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
|
|
+ SSB_SPROM8_RSSISMC5G_SHIFT);
|
|
+ SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
|
|
+ SSB_SPROM8_RSSISAV5G_SHIFT);
|
|
+ SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
|
|
+ SSB_SPROM8_BXA5G_SHIFT);
|
|
+ SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0);
|
|
+ SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0);
|
|
+ SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0);
|
|
+ SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0);
|
|
+ SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0);
|
|
+ SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0);
|
|
+ SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0);
|
|
+ SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0);
|
|
+ SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0);
|
|
+ SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0);
|
|
+ SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0);
|
|
+ SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0);
|
|
+ SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0);
|
|
+ SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0);
|
|
+ SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0);
|
|
+ SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0);
|
|
+ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
|
|
|
|
/* Extract the antenna gain values. */
|
|
SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
|
|
@@ -549,6 +600,7 @@ static int sprom_extract(struct ssb_bus
|
|
ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
|
|
" revision %d detected. Will extract"
|
|
" v1\n", out->revision);
|
|
+ out->revision = 1;
|
|
sprom_extract_r123(out, in);
|
|
}
|
|
}
|
|
--- a/drivers/ssb/pcmcia.c
|
|
+++ b/drivers/ssb/pcmcia.c
|
|
@@ -583,7 +583,7 @@ static int ssb_pcmcia_sprom_write_all(st
|
|
ssb_printk(".");
|
|
err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
|
|
if (err) {
|
|
- ssb_printk("\n" KERN_NOTICE PFX
|
|
+ ssb_printk(KERN_NOTICE PFX
|
|
"Failed to write to SPROM.\n");
|
|
failed = 1;
|
|
break;
|
|
@@ -591,7 +591,7 @@ static int ssb_pcmcia_sprom_write_all(st
|
|
}
|
|
err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
|
|
if (err) {
|
|
- ssb_printk("\n" KERN_NOTICE PFX
|
|
+ ssb_printk(KERN_NOTICE PFX
|
|
"Could not disable SPROM write access.\n");
|
|
failed = 1;
|
|
}
|
|
@@ -678,7 +678,8 @@ int ssb_pcmcia_get_invariants(struct ssb
|
|
sprom->board_rev = tuple.TupleData[1];
|
|
break;
|
|
case SSB_PCMCIA_CIS_PA:
|
|
- GOTO_ERROR_ON(tuple.TupleDataLen != 9,
|
|
+ GOTO_ERROR_ON((tuple.TupleDataLen != 9) &&
|
|
+ (tuple.TupleDataLen != 10),
|
|
"pa tpl size");
|
|
sprom->pa0b0 = tuple.TupleData[1] |
|
|
((u16)tuple.TupleData[2] << 8);
|
|
@@ -718,7 +719,8 @@ int ssb_pcmcia_get_invariants(struct ssb
|
|
sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1];
|
|
break;
|
|
case SSB_PCMCIA_CIS_BFLAGS:
|
|
- GOTO_ERROR_ON(tuple.TupleDataLen != 3,
|
|
+ GOTO_ERROR_ON((tuple.TupleDataLen != 3) &&
|
|
+ (tuple.TupleDataLen != 5),
|
|
"bfl tpl size");
|
|
sprom->boardflags_lo = tuple.TupleData[1] |
|
|
((u16)tuple.TupleData[2] << 8);
|
|
--- a/include/linux/ssb/ssb.h
|
|
+++ b/include/linux/ssb/ssb.h
|
|
@@ -27,24 +27,54 @@ struct ssb_sprom {
|
|
u8 et1mdcport; /* MDIO for enet1 */
|
|
u8 board_rev; /* Board revision number from SPROM. */
|
|
u8 country_code; /* Country Code */
|
|
- u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */
|
|
- u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */
|
|
+ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
|
|
+ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
|
|
u16 pa0b0;
|
|
u16 pa0b1;
|
|
u16 pa0b2;
|
|
u16 pa1b0;
|
|
u16 pa1b1;
|
|
u16 pa1b2;
|
|
+ u16 pa1lob0;
|
|
+ u16 pa1lob1;
|
|
+ u16 pa1lob2;
|
|
+ u16 pa1hib0;
|
|
+ u16 pa1hib1;
|
|
+ u16 pa1hib2;
|
|
u8 gpio0; /* GPIO pin 0 */
|
|
u8 gpio1; /* GPIO pin 1 */
|
|
u8 gpio2; /* GPIO pin 2 */
|
|
u8 gpio3; /* GPIO pin 3 */
|
|
- u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */
|
|
- u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */
|
|
+ u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
|
|
+ u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
|
|
+ u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
|
|
+ u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
|
|
u8 itssi_a; /* Idle TSSI Target for A-PHY */
|
|
u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */
|
|
- u16 boardflags_lo; /* Boardflags (low 16 bits) */
|
|
- u16 boardflags_hi; /* Boardflags (high 16 bits) */
|
|
+ u8 tri2g; /* 2.4GHz TX isolation */
|
|
+ u8 tri5gl; /* 5.2GHz TX isolation */
|
|
+ u8 tri5g; /* 5.3GHz TX isolation */
|
|
+ u8 tri5gh; /* 5.8GHz TX isolation */
|
|
+ u8 rxpo2g; /* 2GHz RX power offset */
|
|
+ u8 rxpo5g; /* 5GHz RX power offset */
|
|
+ u8 rssisav2g; /* 2GHz RSSI params */
|
|
+ u8 rssismc2g;
|
|
+ u8 rssismf2g;
|
|
+ u8 bxa2g; /* 2GHz BX arch */
|
|
+ u8 rssisav5g; /* 5GHz RSSI params */
|
|
+ u8 rssismc5g;
|
|
+ u8 rssismf5g;
|
|
+ u8 bxa5g; /* 5GHz BX arch */
|
|
+ u16 cck2gpo; /* CCK power offset */
|
|
+ u32 ofdm2gpo; /* 2.4GHz OFDM power offset */
|
|
+ u32 ofdm5glpo; /* 5.2GHz OFDM power offset */
|
|
+ u32 ofdm5gpo; /* 5.3GHz OFDM power offset */
|
|
+ u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */
|
|
+ u16 boardflags_lo; /* Board flags (bits 0-15) */
|
|
+ u16 boardflags_hi; /* Board flags (bits 16-31) */
|
|
+ u16 boardflags2_lo; /* Board flags (bits 32-47) */
|
|
+ u16 boardflags2_hi; /* Board flags (bits 48-63) */
|
|
+ /* TODO store board flags in a single u64 */
|
|
|
|
/* Antenna gain values for up to 4 antennas
|
|
* on each band. Values in dBm/4 (Q5.2). Negative gain means the
|
|
@@ -58,7 +88,7 @@ struct ssb_sprom {
|
|
} ghz5; /* 5GHz band */
|
|
} antenna_gain;
|
|
|
|
- /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
|
|
+ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
|
|
};
|
|
|
|
/* Information about the PCB the circuitry is soldered on. */
|
|
@@ -208,6 +238,7 @@ enum ssb_bustype {
|
|
SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */
|
|
SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */
|
|
SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */
|
|
+ SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */
|
|
};
|
|
|
|
/* board_vendor */
|
|
@@ -240,8 +271,12 @@ struct ssb_bus {
|
|
|
|
/* The core in the basic address register window. (PCI bus only) */
|
|
struct ssb_device *mapped_device;
|
|
- /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
|
|
- u8 mapped_pcmcia_seg;
|
|
+ union {
|
|
+ /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
|
|
+ u8 mapped_pcmcia_seg;
|
|
+ /* Current SSB base address window for SDIO. */
|
|
+ u32 sdio_sbaddr;
|
|
+ };
|
|
/* Lock for core and segment switching.
|
|
* On PCMCIA-host busses this is used to protect the whole MMIO access. */
|
|
spinlock_t bar_lock;
|
|
@@ -252,6 +287,11 @@ struct ssb_bus {
|
|
struct pci_dev *host_pci;
|
|
/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
|
|
struct pcmcia_device *host_pcmcia;
|
|
+ /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
|
|
+ struct sdio_func *host_sdio;
|
|
+
|
|
+ /* See enum ssb_quirks */
|
|
+ unsigned int quirks;
|
|
|
|
#ifdef CONFIG_SSB_SPROM
|
|
/* Mutex to protect the SPROM writing. */
|
|
@@ -306,6 +346,11 @@ struct ssb_bus {
|
|
#endif /* DEBUG */
|
|
};
|
|
|
|
+enum ssb_quirks {
|
|
+ /* SDIO connected card requires performing a read after writing a 32-bit value */
|
|
+ SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0),
|
|
+};
|
|
+
|
|
/* The initialization-invariants. */
|
|
struct ssb_init_invariants {
|
|
/* Versioning information about the PCB. */
|
|
@@ -336,6 +381,12 @@ extern int ssb_bus_pcmciabus_register(st
|
|
struct pcmcia_device *pcmcia_dev,
|
|
unsigned long baseaddr);
|
|
#endif /* CONFIG_SSB_PCMCIAHOST */
|
|
+#ifdef CONFIG_SSB_SDIOHOST
|
|
+extern int ssb_bus_sdiobus_register(struct ssb_bus *bus,
|
|
+ struct sdio_func *sdio_func,
|
|
+ unsigned int quirks);
|
|
+#endif /* CONFIG_SSB_SDIOHOST */
|
|
+
|
|
|
|
extern void ssb_bus_unregister(struct ssb_bus *bus);
|
|
|
|
--- a/include/linux/ssb/ssb_driver_chipcommon.h
|
|
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
|
|
@@ -629,5 +629,15 @@ extern int ssb_chipco_serial_init(struct
|
|
/* PMU support */
|
|
extern void ssb_pmu_init(struct ssb_chipcommon *cc);
|
|
|
|
+enum ssb_pmu_ldo_volt_id {
|
|
+ LDO_PAREF = 0,
|
|
+ LDO_VOLT1,
|
|
+ LDO_VOLT2,
|
|
+ LDO_VOLT3,
|
|
+};
|
|
+
|
|
+void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
|
|
+ enum ssb_pmu_ldo_volt_id id, u32 voltage);
|
|
+void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
|
|
|
|
#endif /* LINUX_SSB_CHIPCO_H_ */
|
|
--- a/include/linux/ssb/ssb_regs.h
|
|
+++ b/include/linux/ssb/ssb_regs.h
|
|
@@ -162,7 +162,7 @@
|
|
|
|
/* SPROM shadow area. If not otherwise noted, fields are
|
|
* two bytes wide. Note that the SPROM can _only_ be read
|
|
- * in two-byte quantinies.
|
|
+ * in two-byte quantities.
|
|
*/
|
|
#define SSB_SPROMSIZE_WORDS 64
|
|
#define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16))
|
|
@@ -327,8 +327,11 @@
|
|
#define SSB_SPROM5_GPIOB_P3_SHIFT 8
|
|
|
|
/* SPROM Revision 8 */
|
|
-#define SSB_SPROM8_BFLLO 0x1084 /* Boardflags (low 16 bits) */
|
|
-#define SSB_SPROM8_BFLHI 0x1086 /* Boardflags Hi */
|
|
+#define SSB_SPROM8_BOARDREV 0x1082 /* Board revision */
|
|
+#define SSB_SPROM8_BFLLO 0x1084 /* Board flags (bits 0-15) */
|
|
+#define SSB_SPROM8_BFLHI 0x1086 /* Board flags (bits 16-31) */
|
|
+#define SSB_SPROM8_BFL2LO 0x1088 /* Board flags (bits 32-47) */
|
|
+#define SSB_SPROM8_BFL2HI 0x108A /* Board flags (bits 48-63) */
|
|
#define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */
|
|
#define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */
|
|
#define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/
|
|
@@ -354,14 +357,63 @@
|
|
#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
|
|
#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
|
|
#define SSB_SPROM8_GPIOB_P3_SHIFT 8
|
|
-#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power BG in path 1 */
|
|
-#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */
|
|
+#define SSB_SPROM8_RSSIPARM2G 0x10A4 /* RSSI params for 2GHz */
|
|
+#define SSB_SPROM8_RSSISMF2G 0x000F
|
|
+#define SSB_SPROM8_RSSISMC2G 0x00F0
|
|
+#define SSB_SPROM8_RSSISMC2G_SHIFT 4
|
|
+#define SSB_SPROM8_RSSISAV2G 0x0700
|
|
+#define SSB_SPROM8_RSSISAV2G_SHIFT 8
|
|
+#define SSB_SPROM8_BXA2G 0x1800
|
|
+#define SSB_SPROM8_BXA2G_SHIFT 11
|
|
+#define SSB_SPROM8_RSSIPARM5G 0x10A6 /* RSSI params for 5GHz */
|
|
+#define SSB_SPROM8_RSSISMF5G 0x000F
|
|
+#define SSB_SPROM8_RSSISMC5G 0x00F0
|
|
+#define SSB_SPROM8_RSSISMC5G_SHIFT 4
|
|
+#define SSB_SPROM8_RSSISAV5G 0x0700
|
|
+#define SSB_SPROM8_RSSISAV5G_SHIFT 8
|
|
+#define SSB_SPROM8_BXA5G 0x1800
|
|
+#define SSB_SPROM8_BXA5G_SHIFT 11
|
|
+#define SSB_SPROM8_TRI25G 0x10A8 /* TX isolation 2.4&5.3GHz */
|
|
+#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */
|
|
+#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */
|
|
+#define SSB_SPROM8_TRI5G_SHIFT 8
|
|
+#define SSB_SPROM8_TRI5GHL 0x10AA /* TX isolation 5.2/5.8GHz */
|
|
+#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */
|
|
+#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */
|
|
+#define SSB_SPROM8_TRI5GH_SHIFT 8
|
|
+#define SSB_SPROM8_RXPO 0x10AC /* RX power offsets */
|
|
+#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
|
|
+#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
|
|
+#define SSB_SPROM8_RXPO5G_SHIFT 8
|
|
+#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */
|
|
+#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
|
|
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
|
|
#define SSB_SPROM8_ITSSI_BG_SHIFT 8
|
|
-#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power A in path 1 */
|
|
-#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power A */
|
|
+#define SSB_SPROM8_PA0B0 0x10C2 /* 2GHz power amp settings */
|
|
+#define SSB_SPROM8_PA0B1 0x10C4
|
|
+#define SSB_SPROM8_PA0B2 0x10C6
|
|
+#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power 5.3GHz */
|
|
+#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */
|
|
#define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
|
|
#define SSB_SPROM8_ITSSI_A_SHIFT 8
|
|
+#define SSB_SPROM8_MAXP_AHL 0x10CA /* Max Power 5.2/5.8GHz */
|
|
+#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */
|
|
+#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */
|
|
+#define SSB_SPROM8_MAXP_AL_SHIFT 8
|
|
+#define SSB_SPROM8_PA1B0 0x10CC /* 5.3GHz power amp settings */
|
|
+#define SSB_SPROM8_PA1B1 0x10CE
|
|
+#define SSB_SPROM8_PA1B2 0x10D0
|
|
+#define SSB_SPROM8_PA1LOB0 0x10D2 /* 5.2GHz power amp settings */
|
|
+#define SSB_SPROM8_PA1LOB1 0x10D4
|
|
+#define SSB_SPROM8_PA1LOB2 0x10D6
|
|
+#define SSB_SPROM8_PA1HIB0 0x10D8 /* 5.8GHz power amp settings */
|
|
+#define SSB_SPROM8_PA1HIB1 0x10DA
|
|
+#define SSB_SPROM8_PA1HIB2 0x10DC
|
|
+#define SSB_SPROM8_CCK2GPO 0x1140 /* CCK power offset */
|
|
+#define SSB_SPROM8_OFDM2GPO 0x1142 /* 2.4GHz OFDM power offset */
|
|
+#define SSB_SPROM8_OFDM5GPO 0x1146 /* 5.3GHz OFDM power offset */
|
|
+#define SSB_SPROM8_OFDM5GLPO 0x114A /* 5.2GHz OFDM power offset */
|
|
+#define SSB_SPROM8_OFDM5GHPO 0x114E /* 5.8GHz OFDM power offset */
|
|
|
|
/* Values for SSB_SPROM1_BINF_CCODE */
|
|
enum {
|
|
--- a/drivers/ssb/scan.c
|
|
+++ b/drivers/ssb/scan.c
|
|
@@ -175,6 +175,8 @@ static u32 scan_read32(struct ssb_bus *b
|
|
} else
|
|
ssb_pcmcia_switch_segment(bus, 0);
|
|
break;
|
|
+ default:
|
|
+ break;
|
|
}
|
|
return readl(bus->mmio + offset);
|
|
}
|
|
@@ -188,6 +190,8 @@ static int scan_switchcore(struct ssb_bu
|
|
return ssb_pci_switch_coreidx(bus, coreidx);
|
|
case SSB_BUSTYPE_PCMCIA:
|
|
return ssb_pcmcia_switch_coreidx(bus, coreidx);
|
|
+ default:
|
|
+ break;
|
|
}
|
|
return 0;
|
|
}
|
|
@@ -206,6 +210,8 @@ void ssb_iounmap(struct ssb_bus *bus)
|
|
SSB_BUG_ON(1); /* Can't reach this code. */
|
|
#endif
|
|
break;
|
|
+ default:
|
|
+ break;
|
|
}
|
|
bus->mmio = NULL;
|
|
bus->mapped_device = NULL;
|
|
@@ -230,6 +236,8 @@ static void __iomem *ssb_ioremap(struct
|
|
SSB_BUG_ON(1); /* Can't reach this code. */
|
|
#endif
|
|
break;
|
|
+ default:
|
|
+ break;
|
|
}
|
|
|
|
return mmio;
|