mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-30 23:16:17 +02:00
aabde20e54
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4853 3c298f89-4303-0410-b956-a3cf2f4a3e73
53 lines
1.7 KiB
Plaintext
53 lines
1.7 KiB
Plaintext
Structure of the network scripts in buildroot-ng
|
|
|
|
|
|
1) Usage
|
|
|
|
To be able to access the network functions, you need to include
|
|
the necessary shell scripts by running:
|
|
|
|
. /etc/functions.sh # common functions
|
|
include /lib/network # include /lib/network/*.sh
|
|
scan_interfaces # read and parse the network config
|
|
|
|
Some protocols, such as PPP might change the configured interface names
|
|
at run time (e.g. eth0 => ppp0 for PPPoE). That's why you have to run
|
|
scan_interfaces instead of reading the values from the config directly.
|
|
After running scan_interfaces, the 'ifname' option will always contain
|
|
the effective interface name (which is used for IP traffic) and if the
|
|
physical device name differs from it, it will be stored in the 'device'
|
|
option.
|
|
That means that running 'config_get lan ifname' after scan_interfaces
|
|
might not return the same result as running it before.
|
|
|
|
After running scan_interfaces, the following functions are available:
|
|
|
|
- find_config <interface> looks for a network configuration that includes
|
|
the specified network interface.
|
|
|
|
- setup_interface <interface> [<config>] [<protocol>] will set up the
|
|
specified interface, optionally overriding the network configuration
|
|
name or the protocol that it uses.
|
|
|
|
|
|
|
|
2) Writing protocol handlers
|
|
|
|
You can add custom protocol handlers by adding shell scripts to
|
|
/lib/network. They provide the following two shell functions:
|
|
|
|
scan_<protocolname>() {
|
|
local config="$1"
|
|
# change the interface names if necessary
|
|
}
|
|
|
|
setup_interface_<protocolname>() {
|
|
local interface="$1"
|
|
local config="$2"
|
|
# set up the interface
|
|
}
|
|
|
|
scan_<protocolname> is optional and only necessary if your protocol
|
|
uses a custom device, e.g. a tunnel or a PPP device.
|
|
|