1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-11 15:17:32 +02:00
openwrt-xburst/openwrt/package/linux/kernel-source/include/sbpci.h
wbx 2cea1e6b9a add all source code from linksys/broadcom which is free, to cvs for better maintainence inside
openwrt. this gives us the ability to better support different hardware models, without changing
any external tar-balls. only et.o and wl.o is missing and is fetched from my webserver.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@379 3c298f89-4303-0410-b956-a3cf2f4a3e73
2005-03-16 13:50:00 +00:00

114 lines
4.1 KiB
C

/*
* BCM47XX Sonics SiliconBackplane PCI core hardware definitions.
*
* $Id$
* Copyright 2004, Broadcom Corporation
* All Rights Reserved.
*
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
*/
#ifndef _SBPCI_H
#define _SBPCI_H
/* cpp contortions to concatenate w/arg prescan */
#ifndef PAD
#define _PADLINE(line) pad ## line
#define _XSTR(line) _PADLINE(line)
#define PAD _XSTR(__LINE__)
#endif
/* Sonics side: PCI core and host control registers */
typedef struct sbpciregs {
uint32 control; /* PCI control */
uint32 PAD[3];
uint32 arbcontrol; /* PCI arbiter control */
uint32 PAD[3];
uint32 intstatus; /* Interrupt status */
uint32 intmask; /* Interrupt mask */
uint32 sbtopcimailbox; /* Sonics to PCI mailbox */
uint32 PAD[9];
uint32 bcastaddr; /* Sonics broadcast address */
uint32 bcastdata; /* Sonics broadcast data */
uint32 PAD[2];
uint32 gpioin; /* ro: gpio input (>=rev2) */
uint32 gpioout; /* rw: gpio output (>=rev2) */
uint32 gpioouten; /* rw: gpio output enable (>= rev2) */
uint32 gpiocontrol; /* rw: gpio control (>= rev2) */
uint32 PAD[36];
uint32 sbtopci0; /* Sonics to PCI translation 0 */
uint32 sbtopci1; /* Sonics to PCI translation 1 */
uint32 sbtopci2; /* Sonics to PCI translation 2 */
uint32 PAD[445];
uint16 sprom[36]; /* SPROM shadow Area */
uint32 PAD[46];
} sbpciregs_t;
/* PCI control */
#define PCI_RST_OE 0x01 /* When set, drives PCI_RESET out to pin */
#define PCI_RST 0x02 /* Value driven out to pin */
#define PCI_CLK_OE 0x04 /* When set, drives clock as gated by PCI_CLK out to pin */
#define PCI_CLK 0x08 /* Gate for clock driven out to pin */
/* PCI arbiter control */
#define PCI_INT_ARB 0x01 /* When set, use an internal arbiter */
#define PCI_EXT_ARB 0x02 /* When set, use an external arbiter */
#define PCI_PARKID_MASK 0x06 /* Selects which agent is parked on an idle bus */
#define PCI_PARKID_SHIFT 1
#define PCI_PARKID_LAST 0 /* Last requestor */
#define PCI_PARKID_4710 1 /* 4710 */
#define PCI_PARKID_EXTREQ0 2 /* External requestor 0 */
#define PCI_PARKID_EXTREQ1 3 /* External requestor 1 */
/* Interrupt status/mask */
#define PCI_INTA 0x01 /* PCI INTA# is asserted */
#define PCI_INTB 0x02 /* PCI INTB# is asserted */
#define PCI_SERR 0x04 /* PCI SERR# has been asserted (write one to clear) */
#define PCI_PERR 0x08 /* PCI PERR# has been asserted (write one to clear) */
#define PCI_PME 0x10 /* PCI PME# is asserted */
/* (General) PCI/SB mailbox interrupts, two bits per pci function */
#define MAILBOX_F0_0 0x100 /* function 0, int 0 */
#define MAILBOX_F0_1 0x200 /* function 0, int 1 */
#define MAILBOX_F1_0 0x400 /* function 1, int 0 */
#define MAILBOX_F1_1 0x800 /* function 1, int 1 */
#define MAILBOX_F2_0 0x1000 /* function 2, int 0 */
#define MAILBOX_F2_1 0x2000 /* function 2, int 1 */
#define MAILBOX_F3_0 0x4000 /* function 3, int 0 */
#define MAILBOX_F3_1 0x8000 /* function 3, int 1 */
/* Sonics broadcast address */
#define BCAST_ADDR_MASK 0xff /* Broadcast register address */
/* Sonics to PCI translation types */
#define SBTOPCI0_MASK 0xfc000000
#define SBTOPCI1_MASK 0xfc000000
#define SBTOPCI2_MASK 0xc0000000
#define SBTOPCI_MEM 0
#define SBTOPCI_IO 1
#define SBTOPCI_CFG0 2
#define SBTOPCI_CFG1 3
#define SBTOPCI_PREF 0x4 /* prefetch enable */
#define SBTOPCI_BURST 0x8 /* burst enable */
/* PCI side: Reserved PCI configuration registers (see pcicfg.h) */
#define cap_list rsvd_a[0]
#define bar0_window dev_dep[0x80 - 0x40]
#define bar1_window dev_dep[0x84 - 0x40]
#define sprom_control dev_dep[0x88 - 0x40]
#ifndef _LANGUAGE_ASSEMBLY
extern int sbpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len);
extern int sbpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len);
extern void sbpci_ban(uint16 core);
extern int sbpci_init(void *sbh);
extern void sbpci_check(void *sbh);
#endif /* !_LANGUAGE_ASSEMBLY */
#endif /* _SBPCI_H */