1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-01 05:45:20 +02:00
openwrt-xburst/package/uboot-lantiq/files/include/configs/arv752DWP22.h
blogic c2b8621119 [uboot-lantiq] add support for arv4518 and arv752DWP22 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25071 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-23 12:06:02 +00:00

153 lines
5.4 KiB
C

/*
* (C) Copyright 2003-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* This file contains the configuration parameters for the Danube reference board.
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/* #define DEBUG */
#define CONFIG_MIPS32 1 /* MIPS32 CPU compatible */
#define CONFIG_MIPS24KEC 1 /* MIPS 24KEc CPU core */
#define CONFIG_DANUBE 1 /* in a Danube/Twinpass Chip */
#define CONFIG_ARV752DWP22 1 /* on the arv752DWP22 Board */
#define CONFIG_SYS_MIPS_MULTI_CPU 1 /* This is a multi cpu system */
#define CONFIG_USE_DDR_RAM
#define CONFIG_SYS_MAX_RAM 64*1024*1024
#define CONFIG_FLASH_CFI_DRIVER 1
#define CONFIG_SYS_INIT_RAM_LOCK_MIPS
#ifdef CONFIG_SYS_RAMBOOT
//#warning CONFIG_SYS_RAMBOOT
#define CONFIG_SKIP_LOWLEVEL_INIT
#else /* CONFIG_SYS_RAMBOOT */
#define CONFIG_SYS_EBU_BOOT
#define INFINEON_EBU_BOOTCFG 0x688C688C /* CMULT = 8 for 150 MHz */
#endif /* CONFIG_SYS_RAMBOOT */
#if 1
#ifndef CPU_CLOCK_RATE
#define CPU_CLOCK_RATE (ifx_get_cpuclk())
#endif
#endif
#define CONFIG_SYS_PROMPT "ARV752DWP22 => " /* Monitor Command Prompt */
#undef CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
/*
* Include common defines/options for all Infineon boards
*/
#include "ifx-common.h"
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"ram_addr=0x80500000\0" \
"kernel_addr=0xb0050000\0" \
"mtdparts=mtdparts=ifx-nor:256k(uboot)ro,64k(uboot_env)ro,64k(kernel),-(rootfs)\0" \
"flashargs=setenv bootargs rootfstype=squashfs,jffs2\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath} \0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off\0" \
"addmisc=setenv bootargs ${bootargs} init=/etc/preinit " \
"console=ttyS1,115200 ethaddr=${ethaddr} " \
"${mtdparts}\0" \
"flash_flash=run flashargs addip addmisc;" \
"bootm ${kernel_addr}\0" \
"flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}\0" \
"net_flash=run load_kernel flashargs addip addmisc;" \
"bootm ${ram_addr}\0" \
"net_nfs=run load_kernel nfsargs addip addmisc;" \
"bootm ${ram_addr}\0" \
"load_kernel=tftp ${ram_addr} " \
"${tftppath}openwrt-ifxmips-uImage\0" \
"update_uboot=tftp 0x80500000 ${tftppath}u-boot.bin;era 0xb0000000 +${filesize};" \
"cp.b 0x80500000 0xb0000000 ${filesize}\0" \
"update_openwrt=tftp ${ram_addr} " \
"${tftppath}openwrt-ifxmips-squashfs.image;" \
"era ${kernel_addr} +${filesize};" \
"cp.b ${ram_addr} ${kernel_addr} ${filesize}\0"
/*
* Cache Configuration (cpu/chip specific, Danube)
*/
#define CONFIG_SYS_DCACHE_SIZE 16384
#define CONFIG_SYS_ICACHE_SIZE 16384
#define CONFIG_SYS_CACHELINE_SIZE 32
#define CONFIG_SYS_MIPS_CACHE_OPER_MODE CONF_CM_CACHABLE_NO_WA
#define CONFIG_NET_MULTI
#if 0
#define CONFIG_M4530_ETH
#define CONFIG_M4530_FPGA
#endif
#define CONFIG_IFX_ETOP
//#define CLK_OUT2_25MHZ
#define CONFIG_EXTRA_SWITCH
//#define CONFIG_RMII /* use interface in RMII mode */
#define CONFIG_MII
#define CONFIG_CMD_MII
#define CONFIG_IFX_ASC
#ifdef CONFIG_USE_ASC0
#define CONFIG_SYS_IFX_ASC_BASE 0x1E100400
#else
#define CONFIG_SYS_IFX_ASC_BASE 0x1E100C00
#endif
#ifdef CONFIG_SYS_RAMBOOT
/* Configuration of EBU: */
/* starting address from 0xb0000000 */
/* make the flash available from RAM boot */
# define CONFIG_EBU_ADDSEL0 0x10000031
# define CONFIG_EBU_BUSCON0 0x0001D7FF
# define CONFIG_EBU_ADDSEL1 0x14000001
# define CONFIG_EBU_BUSCON1 0x4041D7FD
#endif
#define CONFIG_CMD_HTTPD /* enable upgrade via HTTPD */
//#define CONFIG_ETHADDR 00:13:f7:df:1c:80
//#define CONFIG_ETHADDR 11:22:33:44:55:66
#define CONFIG_IPADDR 192.168.2.1
#define CONFIG_SERVERIP 192.168.2.101
#define CONFIG_GATEWAYIP 192.168.2.254
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_ROOTPATH "/export"
#endif /* __CONFIG_H */