qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-18 12:00:16 +02:00
Code
c3debd3d4e
openwrt-xburst/package/openwrt/include/wlioctl.h
nbd 4b46f20f04 add more ioctl stuff 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2005-03-23 16:29:35 +00:00

1048 lines
32 KiB
C
Raw Blame History

/*
* Custom OID/ioctl definitions for
* Broadcom 802.11abg Networking Device Driver
*
* Definitions subject to change without notice.
*
* Copyright 2004, Broadcom Corporation
* All Rights Reserved.
*
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
*
* $Id$
*/
#ifndef _wlioctl_h_
#define _wlioctl_h_
#include <typedefs.h>
#include <proto/ethernet.h>
#include <proto/802.11.h>
#if defined(__GNUC__)
#define PACKED __attribute__((packed))
#else
#define PACKED
#endif
#define WL_NUMRATES 255 /* max # of rates in a rateset */
typedef struct wl_rateset {
uint32 count; /* # rates in this set */
uint8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */
} wl_rateset_t;
#define WL_CHANSPEC_CHAN_MASK 0x0fff
#define WL_CHANSPEC_BAND_MASK 0xf000
#define WL_CHANSPEC_BAND_SHIFT 12
#define WL_CHANSPEC_BAND_A 0x1000
#define WL_CHANSPEC_BAND_B 0x2000
/*
* Per-bss information structure.
*/
#define WL_LEGACY_BSS_INFO_VERSION 106 /* an older supported version of wl_bss_info struct */
#define WL_BSS_INFO_VERSION 107 /* current version of wl_bss_info struct */
typedef struct wl_bss_info106 {
uint version; /* version field */
struct ether_addr BSSID;
uint8 SSID_len;
uint8 SSID[32];
uint8 Privacy; /* 0=No WEP, 1=Use WEP */
int16 RSSI; /* receive signal strength (in dBm) */
uint16 beacon_period; /* units are Kusec */
uint16 atim_window; /* units are Kusec */
uint8 channel; /* Channel no. */
int8 infra; /* 0=IBSS, 1=infrastructure, 2=unknown */
struct {
uint count; /* # rates in this set */
uint8 rates[12]; /* rates in 500kbps units w/hi bit set if basic */
} rateset; /* supported rates */
uint8 dtim_period; /* DTIM period */
int8 phy_noise; /* noise right after tx (in dBm) */
uint16 capability; /* Capability information */
struct dot11_bcn_prb *prb; /* probe response frame (ioctl na) */
uint16 prb_len; /* probe response frame length (ioctl na) */
struct {
uint8 supported; /* wpa supported */
uint8 multicast; /* multicast cipher */
uint8 ucount; /* count of unicast ciphers */
uint8 unicast[4]; /* unicast ciphers */
uint8 acount; /* count of auth modes */
uint8 auth[4]; /* Authentication modes */
} wpa;
} wl_bss_info106_t;
typedef struct wl_bss_info {
uint32 version; /* version field */
uint32 length; /* byte length of data in this record, starting at version and including IEs */
struct ether_addr BSSID;
uint16 beacon_period; /* units are Kusec */
uint16 capability; /* Capability information */
uint8 SSID_len;
uint8 SSID[32];
struct {
uint count; /* # rates in this set */
uint8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */
} rateset; /* supported rates */
uint8 channel; /* Channel no. */
uint16 atim_window; /* units are Kusec */
uint8 dtim_period; /* DTIM period */
int16 RSSI; /* receive signal strength (in dBm) */
int8 phy_noise; /* noise (in dBm) */
uint32 ie_length; /* byte length of Information Elements */
/* variable length Information Elements */
} wl_bss_info_t;
typedef struct wlc_ssid {
uint32 SSID_len;
uchar SSID[32];
} wlc_ssid_t;
typedef struct wl_scan_params {
wlc_ssid_t ssid; /* default is {0, ""} */
struct ether_addr bssid;/* default is bcast */
int8 bss_type; /* default is any, DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT */
int8 scan_type; /* -1 use default, DOT11_SCANTYPE_ACTIVE/PASSIVE */
int32 nprobes; /* -1 use default, number of probes per channel */
int32 active_time; /* -1 use default, dwell time per channel for active scanning */
int32 passive_time; /* -1 use default, dwell time per channel for passive scanning */
int32 home_time; /* -1 use default, dwell time for the home channel between channel scans */
int32 channel_num; /* 0 use default (all available channels), count of channels in channel_list */
uint16 channel_list[1]; /* list of chanspecs */
} wl_scan_params_t;
/* size of wl_scan_params not including variable length array */
#define WL_SCAN_PARAMS_FIXED_SIZE 64
typedef struct wl_scan_results {
uint32 buflen;
uint32 version;
uint32 count;
wl_bss_info_t bss_info[1];
} wl_scan_results_t;
/* size of wl_scan_results not including variable length array */
#define WL_SCAN_RESULTS_FIXED_SIZE 12
/* uint32 list */
typedef struct wl_uint32_list {
/* in - # of elements, out - # of entries */
uint32 count;
/* variable length uint32 list */
uint32 element[1];
} wl_uint32_list_t;
#define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NULL */
typedef struct wl_channels_in_country {
uint32 buflen;
uint32 band;
char country_abbrev[WLC_CNTRY_BUF_SZ];
uint32 count;
uint32 channel[1];
} wl_channels_in_country_t;
typedef struct wl_country_list {
uint32 buflen;
uint32 band_set;
uint32 band;
uint32 count;
char country_abbrev[1];
} wl_country_list_t;
#define WL_RM_TYPE_BASIC 1
#define WL_RM_TYPE_CCA 2
#define WL_RM_TYPE_RPI 3
#define WL_RM_FLAG_PARALLEL (1<<0)
#define WL_RM_FLAG_LATE (1<<1)
#define WL_RM_FLAG_INCAPABLE (1<<2)
#define WL_RM_FLAG_REFUSED (1<<3)
typedef struct wl_rm_req_elt {
int8 type;
int8 flags;
uint16 chanspec;
uint32 token; /* token for this measurement */
uint32 tsf_h; /* TSF high 32-bits of Measurement start time */
uint32 tsf_l; /* TSF low 32-bits */
uint32 dur; /* TUs */
} wl_rm_req_elt_t;
typedef struct wl_rm_req {
uint32 token; /* overall measurement set token */
uint32 count; /* number of measurement reqests */
wl_rm_req_elt_t req[1]; /* variable length block of requests */
} wl_rm_req_t;
#define WL_RM_REQ_FIXED_LEN 8
typedef struct wl_rm_rep_elt {
int8 type;
int8 flags;
uint16 chanspec;
uint32 token; /* token for this measurement */
uint32 tsf_h; /* TSF high 32-bits of Measurement start time */
uint32 tsf_l; /* TSF low 32-bits */
uint32 dur; /* TUs */
uint32 len; /* byte length of data block */
uint8 data[1]; /* variable length data block */
} wl_rm_rep_elt_t;
#define WL_RM_REP_ELT_FIXED_LEN 24 /* length excluding data block */
#define WL_RPI_REP_BIN_NUM 8
typedef struct wl_rm_rpi_rep {
uint8 rpi[WL_RPI_REP_BIN_NUM];
int8 rpi_max[WL_RPI_REP_BIN_NUM];
} wl_rm_rpi_rep_t;
typedef struct wl_rm_rep {
uint32 token; /* overall measurement set token */
uint32 len; /* length of measurement report block */
wl_rm_rep_elt_t rep[1]; /* variable length block of reports */
} wl_rm_rep_t;
#define WL_RM_REP_FIXED_LEN 8
#define WLC_MAX_KEY_SIZE 32 /* max size of any key */
#define WLC_MAX_IV_SIZE 16 /* max size of any IV */
#define WLC_EXT_IV_FLAG (1<<5) /* flag to indicate IV is > 4 bytes */
#define WLC_MAX_DEFAULT_KEYS 4 /* # of default WEP keys */
#define WLC_MAX_KEYS 54 /* Max # of WEP keys */
#define WLC_WEP1_KEY_SIZE 5 /* max size of any WEP key */
#define WLC_WEP1_KEY_HEX_SIZE 10 /* size of WEP key in hex. */
#define WLC_WEP128_KEY_SIZE 13 /* max size of any WEP key */
#define WLC_WEP128_KEY_HEX_SIZE 26 /* size of WEP key in hex. */
#define WLC_TKIP_MIC_SIZE 8 /* size of TKIP MIC */
#define WLC_TKIP_EOM_SIZE 7 /* max size of TKIP EOM */
#define WLC_TKIP_EOM_FLAG 0x5a /* TKIP EOM flag byte */
#define WLC_TKIP_KEY_SIZE 32 /* size of any TKIP key */
#define WLC_TKIP_MIC_AUTH_TX 16 /* offset to Authenticator MIC TX key */
#define WLC_TKIP_MIC_AUTH_RX 24 /* offset to Authenticator MIC RX key */
#define WLC_TKIP_MIC_SUP_RX 16 /* offset to Supplicant MIC RX key */
#define WLC_TKIP_MIC_SUP_TX 24 /* offset to Supplicant MIC TX key */
#define WLC_TKIP_P1_KEY_SIZE 10 /* size of TKHash Phase1 output, in bytes */
#define WLC_TKIP_P2_KEY_SIZE 16 /* size of TKHash Phase2 output */
#define WLC_AES_KEY_SIZE 16 /* size of AES key */
typedef enum sup_auth_status {
WLC_SUP_DISCONNECTED = 0,
WLC_SUP_CONNECTING,
WLC_SUP_IDREQUIRED,
WLC_SUP_AUTHENTICATING,
WLC_SUP_AUTHENTICATED,
WLC_SUP_KEYXCHANGE,
WLC_SUP_KEYED
} sup_auth_status_t;
/* Enumerate crypto algorithms */
#define CRYPTO_ALGO_OFF 0
#define CRYPTO_ALGO_WEP1 1
#define CRYPTO_ALGO_TKIP 2
#define CRYPTO_ALGO_WEP128 3
#define CRYPTO_ALGO_AES_CCM 4
#define CRYPTO_ALGO_AES_OCB_MSDU 5
#define CRYPTO_ALGO_AES_OCB_MPDU 6
#define CRYPTO_ALGO_NALG 7
#define WSEC_GEN_MIC_ERROR 0x0001
#define WSEC_GEN_REPLAY 0x0002
#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */
#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */
#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */
#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */
typedef struct wlc_tkip_info {
uint16 phase1[WLC_TKIP_P1_KEY_SIZE/sizeof(uint16)]; /* tkhash phase1 result */
uint8 phase2[WLC_TKIP_P2_KEY_SIZE]; /* tkhash phase2 result */
uint32 micl;
uint32 micr;
} tkip_info_t;
typedef struct _wsec_iv {
uint32 hi; /* upper 32 bits of IV */
uint16 lo; /* lower 16 bits of IV */
} wsec_iv_t;
typedef struct wsec_key {
uint32 index; /* key index */
uint32 len; /* key length */
uint8 data[WLC_MAX_KEY_SIZE]; /* key data */
tkip_info_t tkip_tx; /* tkip transmit state */
tkip_info_t tkip_rx; /* tkip receive state */
uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
uint32 flags; /* misc flags */
uint32 algo_hw; /* cache for hw register*/
uint32 aes_mode; /* cache for hw register*/
int iv_len; /* IV length */
int iv_initialized; /* has IV been initialized already? */
int icv_len; /* ICV length */
wsec_iv_t rxiv; /* Rx IV */
wsec_iv_t txiv; /* Tx IV */
struct ether_addr ea; /* per station */
} wsec_key_t;
typedef struct wl_wsec_key {
uint32 index; /* key index */
uint32 len; /* key length */
uint8 data[DOT11_MAX_KEY_SIZE]; /* key data */
uint32 pad_1[18];
uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
uint32 flags; /* misc flags */
uint32 pad_2[2];
int pad_3;
int iv_initialized; /* has IV been initialized already? */
int pad_4;
/* Rx IV */
struct {
uint32 hi; /* upper 32 bits of IV */
uint16 lo; /* lower 16 bits of IV */
} rxiv;
uint32 pad_5[2];
struct ether_addr ea; /* per station */
} wl_wsec_key_t;
/* For use with wlc_wep_key.flags */
#define WSEC_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */
#define WSEC_TKIP_ERROR (1 << 2) /* Provoke deliberate error */
#define WSEC_MIN_PSK_LEN 8
#define WSEC_MAX_PSK_LEN 64
/* Flag for key material needing passhash'ing */
#define WSEC_PASSPHRASE (1<<0)
/* recepticle for WLC_SET_WSEC_PMK parameter */
typedef struct {
ushort key_len; /* octets in key material */
ushort flags; /* key handling qualification */
uint8 key[WSEC_MAX_PSK_LEN]; /* PMK material */
} wsec_pmk_t;
/* wireless security bitvec */
#define WEP_ENABLED 1
#define TKIP_ENABLED 2
#define AES_ENABLED 4
#define WSEC_SWFLAG 8
#define WSEC_SW(wsec) ((wsec) & WSEC_SWFLAG)
#define WSEC_HW(wsec) (!WSEC_SW(wsec))
#define WSEC_WEP_ENABLED(wsec) ((wsec) & WEP_ENABLED)
#define WSEC_TKIP_ENABLED(wsec) ((wsec) & TKIP_ENABLED)
#define WSEC_AES_ENABLED(wsec) ((wsec) & AES_ENABLED)
#define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED))
/* wireless authentication bit vector */
#define WPA_ENABLED 1
#define PSK_ENABLED 2
#define WAUTH_WPA_ENABLED(wauth) ((wauth) & WPA_ENABLED)
#define WAUTH_PSK_ENABLED(wauth) ((wauth) & PSK_ENABLED)
#define WAUTH_ENABLED(wauth) ((wauth) & (WPA_ENABLED | PSK_ENABLED))
/* group/mcast cipher */
#define WPA_MCAST_CIPHER(wsec) (((wsec) & TKIP_ENABLED) ? WPA_CIPHER_TKIP : \
((wsec) & AES_ENABLED) ? WPA_CIPHER_AES_CCM : \
WPA_CIPHER_NONE)
typedef struct wl_led_info {
uint32 index; /* led index */
uint32 behavior;
bool activehi;
} wl_led_info_t;
/*
* definitions for driver messages passed from WL to NAS.
*/
/* Use this to recognize wpa and 802.1x driver messages. */
static const uint8 wl_wpa_snap_template[] =
{ 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c };
#define WL_WPA_MSG_IFNAME_MAX 16
/* WPA driver message */
typedef struct wl_wpa_header {
struct ether_header eth;
struct dot11_llc_snap_header snap;
uint8 version;
uint8 type;
/* version 2 additions */
char ifname[WL_WPA_MSG_IFNAME_MAX];
/* version specific data */
/* uint8 data[1]; */
} wl_wpa_header_t PACKED;
/*
* definitions for 802.2 messages passed from WL to NAS.
*/
/* This seems not to be defined outside the kernel on linux. */
#ifndef ETH_P_802_2
#define ETH_P_802_2 4
#endif
#define WL_WPA_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX)
/* WPA driver message ethertype - private between wlc and nas */
#define WL_WPA_ETHER_TYPE 0x9999
/* WPA driver message current version */
#define WL_WPA_MSG_VERSION 2
/* Type field values for the 802.2 driver messages for WPA. */
#define WLC_ASSOC_MSG 1
#define WLC_DISASSOC_MSG 2
#define WLC_PTK_MIC_MSG 3
#define WLC_GTK_MIC_MSG 4
/* Use this to recognize 802.2 driver messages. */
static const uint8 wpa_snap_template[] =
{ 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c };
/* 802.1x driver message */
typedef struct wl_eapol_header {
struct ether_header eth;
struct dot11_llc_snap_header snap;
uint8 version;
uint8 reserved;
char ifname[WL_WPA_MSG_IFNAME_MAX];
/* version specific data */
/* uint8 802_1x_msg[1]; */
} wl_eapol_header_t PACKED;
#define WL_EAPOL_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX)
/* 802.1x driver message ethertype - private between wlc and nas */
#define WL_EAPOL_ETHER_TYPE 0x999A
/* 802.1x driver message current version */
#define WL_EAPOL_MSG_VERSION 1
/* srom read/write struct passed through ioctl */
typedef struct {
uint byteoff; /* byte offset */
uint nbytes; /* number of bytes */
uint16 buf[1];
} srom_rw_t;
/* R_REG and W_REG struct passed through ioctl */
typedef struct {
uint32 byteoff; /* byte offset of the field in d11regs_t */
uint32 val; /* read/write value of the field */
uint32 size; /* sizeof the field */
} rw_reg_t;
/* Structure used by GET/SET_ATTEN ioctls */
typedef struct {
uint16 auto_ctrl; /* 1: Automatic control, 0: overriden */
uint16 bb; /* Baseband attenuation */
uint16 radio; /* Radio attenuation */
uint16 txctl1; /* Radio TX_CTL1 value */
} atten_t;
/* Used to get specific STA parameters */
typedef struct {
uint32 val;
struct ether_addr ea;
} scb_val_t;
/* Event data type */
typedef struct {
uint msg; /* Message (see below) */
struct ether_addr *addr; /* Station address (if applicable) */
uint status; /* Status code (see below) */
uint reason; /* Reason code (if applicable) */
uint auth_type; /* WLC_E_AUTH */
bool link; /* WLC_E_LINK */
bool group; /* WLC_E_MIC_ERROR */
bool flush_txq; /* WLC_E_MIC_ERROR */
} wlc_event_t;
typedef struct {
uint16 ver; /* version of this struct */
uint16 cap; /* sta's advertized capabilities */
uint32 flags; /* flags defined below */
uint32 idle; /* time since data pkt rx'd from sta */
struct ether_addr ea; /* Station address */
wl_rateset_t rateset; /* rateset in use */
} sta_info_t;
#define WL_STA_INFO_LEN 300
#define WL_STA_VER 1
/* flags fields */
#define WL_STA_BRCM 0x01
#define WL_STA_WME 0x02
#define WL_STA_ABCAP 0x04
#define WL_STA_AUTHE 0x08
#define WL_STA_ASSOC 0x10
#define WL_STA_AUTHO 0x20
/* Event messages */
#define WLC_E_SET_SSID 1
#define WLC_E_JOIN 2
#define WLC_E_START 3
#define WLC_E_AUTH 4
#define WLC_E_AUTH_IND 5
#define WLC_E_DEAUTH 6
#define WLC_E_DEAUTH_IND 7
#define WLC_E_ASSOC 8
#define WLC_E_ASSOC_IND 9
#define WLC_E_REASSOC 10
#define WLC_E_REASSOC_IND 11
#define WLC_E_DISASSOC 12
#define WLC_E_DISASSOC_IND 13
#define WLC_E_QUIET_START 14 /* 802.11h Quiet period started */
#define WLC_E_QUIET_END 15 /* 802.11h Quiet period ended */
#define WLC_E_GOT_BEACONS 16
#define WLC_E_LINK 17 /* Link indication */
#define WLC_E_MIC_ERROR 18 /* TKIP MIC error occurred */
#define WLC_E_NDIS_LINK 19 /* NDIS style link indication */
#define WLC_E_ROAM 20
#define WLC_E_LAST 21
/* Event status codes */
#define WLC_E_STATUS_SUCCESS 0
#define WLC_E_STATUS_FAIL 1
#define WLC_E_STATUS_TIMEOUT 2
#define WLC_E_STATUS_NO_NETWORKS 3
#define WLC_E_STATUS_ABORT 4
typedef struct wlc_event_cb {
uint msg; /* Event message or 0 for all */
void (*fn)(void *, wlc_event_t *); /* Callback function */
void *context; /* Passed to callback function */
struct wlc_event_cb *next; /* Next in the chain */
} wlc_event_cb_t;
/*
* Country locale determines which channels are available to us.
*/
typedef enum _wlc_locale {
WLC_WW = 0, /* Worldwide */
WLC_THA, /* Thailand */
WLC_ISR, /* Israel */
WLC_JDN, /* Jordan */
WLC_PRC, /* China */
WLC_JPN, /* Japan */
WLC_FCC, /* USA */
WLC_EUR, /* Europe */
WLC_USL, /* US Low Band only */
WLC_JPH, /* Japan High Band only */
WLC_ALL, /* All the channels in this band */
WLC_11D, /* Represents locale recieved by 11d beacons */
WLC_LAST_LOCALE,
WLC_UNDEFINED_LOCALE = 0xf
} wlc_locale_t;
/* channel encoding */
typedef struct channel_info {
int hw_channel;
int target_channel;
int scan_channel;
} channel_info_t;
/* For ioctls that take a list of MAC addresses */
struct maclist {
uint count; /* number of MAC addresses */
struct ether_addr ea[1]; /* variable length array of MAC addresses */
};
/* get pkt count struct passed through ioctl */
typedef struct get_pktcnt {
uint rx_good_pkt;
uint rx_bad_pkt;
uint tx_good_pkt;
uint tx_bad_pkt;
} get_pktcnt_t;
/* Linux network driver ioctl encoding */
typedef struct wl_ioctl {
uint cmd; /* common ioctl definition */
void *buf; /* pointer to user buffer */
uint len; /* length of user buffer */
bool set; /* get or set request (optional) */
uint used; /* bytes read or written (optional) */
uint needed; /* bytes needed (optional) */
} wl_ioctl_t;
/*
* Structure for passing hardware and software
* revision info up from the driver.
*/
typedef struct wlc_rev_info {
uint vendorid; /* PCI vendor id */
uint deviceid; /* device id of chip */
uint radiorev; /* radio revision */
uint chiprev; /* chip revision */
uint corerev; /* core revision */
uint boardid; /* board identifier (usu. PCI sub-device id) */
uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */
uint boardrev; /* board revision */
uint driverrev; /* driver version */
uint ucoderev; /* microcode version */
uint bus; /* bus type */
uint chipnum; /* chip number */
} wlc_rev_info_t;
/* check this magic number */
#define WLC_IOCTL_MAGIC 0x14e46c77
/* bump this number if you change the ioctl interface */
#define WLC_IOCTL_VERSION 1
/* maximum length buffer required */
#define WLC_IOCTL_MAXLEN 8192
/* common ioctl definitions */
#define WLC_GET_MAGIC 0
#define WLC_GET_VERSION 1
#define WLC_UP 2
#define WLC_DOWN 3
#define WLC_GET_LOOP 4
#define WLC_SET_LOOP 5
#define WLC_DUMP 6
#define WLC_GET_MSGLEVEL 7
#define WLC_SET_MSGLEVEL 8
#define WLC_GET_PROMISC 9
#define WLC_SET_PROMISC 10
#define WLC_OBSOLETE 11
#define WLC_GET_RATE 12
#define WLC_SET_RATE 13
#define WLC_GET_INSTANCE 14
#define WLC_GET_FRAG 15
#define WLC_SET_FRAG 16
#define WLC_GET_RTS 17
#define WLC_SET_RTS 18
#define WLC_GET_INFRA 19
#define WLC_SET_INFRA 20
#define WLC_GET_AUTH 21
#define WLC_SET_AUTH 22
#define WLC_GET_BSSID 23
#define WLC_SET_BSSID 24
#define WLC_GET_SSID 25
#define WLC_SET_SSID 26
#define WLC_RESTART 27
#define WLC_DUMP_SCB 28
#define WLC_GET_CHANNEL 29
#define WLC_SET_CHANNEL 30
#define WLC_GET_SRL 31
#define WLC_SET_SRL 32
#define WLC_GET_LRL 33
#define WLC_SET_LRL 34
#define WLC_GET_PLCPHDR 35
#define WLC_SET_PLCPHDR 36
#define WLC_GET_RADIO 37
#define WLC_SET_RADIO 38
#define WLC_GET_PHYTYPE 39
#define WLC_DUMP_RATE 40
#define WLC_SET_RATE_PARAMS 41
#define WLC_GET_WEP 42
#define WLC_SET_WEP 43
#define WLC_GET_KEY 44
#define WLC_SET_KEY 45
#define WLC_GET_REGULATORY 46
#define WLC_SET_REGULATORY 47
#define WLC_GET_PASSIVE 48 /* added by nbd */
#define WLC_SET_PASSIVE 49 /* added by nbd */
#define WLC_SCAN 50
#define WLC_SCAN_RESULTS 51
#define WLC_DISASSOC 52
#define WLC_REASSOC 53
#define WLC_GET_ROAM_TRIGGER 54
#define WLC_SET_ROAM_TRIGGER 55
#define WLC_GET_ROAM_DELTA 56
#define WLC_SET_ROAM_DELTA 57
#define WLC_GET_ROAM_SCAN_PERIOD 58
#define WLC_SET_ROAM_SCAN_PERIOD 59
#define WLC_EVM 60
#define WLC_GET_TXANT 61
#define WLC_SET_TXANT 62
#define WLC_GET_ANTDIV 63
#define WLC_SET_ANTDIV 64
#define WLC_GET_TXPWR 65
#define WLC_SET_TXPWR 66
#define WLC_GET_CLOSED 67
#define WLC_SET_CLOSED 68
#define WLC_GET_MACLIST 69
#define WLC_SET_MACLIST 70
#define WLC_GET_RATESET 71
#define WLC_SET_RATESET 72
#define WLC_GET_LOCALE 73
#define WLC_SET_LOCALE 74
#define WLC_GET_BCNPRD 75
#define WLC_SET_BCNPRD 76
#define WLC_GET_DTIMPRD 77
#define WLC_SET_DTIMPRD 78
#define WLC_GET_SROM 79
#define WLC_SET_SROM 80
#define WLC_GET_WEP_RESTRICT 81
#define WLC_SET_WEP_RESTRICT 82
#define WLC_GET_COUNTRY 83
#define WLC_SET_COUNTRY 84
#define WLC_GET_PM 85
#define WLC_SET_PM 86
#define WLC_GET_WAKE 87
#define WLC_SET_WAKE 88
#define WLC_GET_D11CNTS 89
#define WLC_GET_FORCELINK 90 /* ndis only */
#define WLC_SET_FORCELINK 91 /* ndis only */
#define WLC_FREQ_ACCURACY 92
#define WLC_CARRIER_SUPPRESS 93
#define WLC_GET_PHYREG 94
#define WLC_SET_PHYREG 95
#define WLC_GET_RADIOREG 96
#define WLC_SET_RADIOREG 97
#define WLC_GET_REVINFO 98
#define WLC_GET_UCANTDIV 99
#define WLC_SET_UCANTDIV 100
#define WLC_R_REG 101
#define WLC_W_REG 102
#define WLC_DIAG_LOOPBACK 103
#define WLC_RESET_D11CNTS 104
#define WLC_GET_MACMODE 105
#define WLC_SET_MACMODE 106
#define WLC_GET_MONITOR 107 /* added by nbd */
#define WLC_SET_MONITOR 108 /* added by nbd */
#define WLC_GET_GMODE 109
#define WLC_SET_GMODE 110
#define WLC_GET_LEGACY_ERP 111
#define WLC_SET_LEGACY_ERP 112
#define WLC_GET_RX_ANT 113
#define WLC_GET_CURR_RATESET 114 /* current rateset */
#define WLC_GET_SCANSUPPRESS 115
#define WLC_SET_SCANSUPPRESS 116
#define WLC_GET_AP 117
#define WLC_SET_AP 118
#define WLC_GET_EAP_RESTRICT 119
#define WLC_SET_EAP_RESTRICT 120
#define WLC_SCB_AUTHORIZE 121
#define WLC_SCB_DEAUTHORIZE 122
#define WLC_GET_WDSLIST 123
#define WLC_SET_WDSLIST 124
#define WLC_GET_ATIM 125
#define WLC_SET_ATIM 126
#define WLC_GET_RSSI 127
#define WLC_GET_PHYANTDIV 128
#define WLC_SET_PHYANTDIV 129
#define WLC_AP_RX_ONLY 130
#define WLC_GET_TX_PATH_PWR 131
#define WLC_SET_TX_PATH_PWR 132
#define WLC_GET_WSEC 133
#define WLC_SET_WSEC 134
#define WLC_GET_PHY_NOISE 135
#define WLC_GET_BSS_INFO 136
#define WLC_GET_PKTCNTS 137
#define WLC_GET_LAZYWDS 138
#define WLC_SET_LAZYWDS 139
#define WLC_GET_BANDLIST 140
#define WLC_GET_BAND 141
#define WLC_SET_BAND 142
#define WLC_SCB_DEAUTHENTICATE 143
#define WLC_GET_SHORTSLOT 144
#define WLC_GET_SHORTSLOT_OVERRIDE 145
#define WLC_SET_SHORTSLOT_OVERRIDE 146
#define WLC_GET_SHORTSLOT_RESTRICT 147
#define WLC_SET_SHORTSLOT_RESTRICT 148
#define WLC_GET_GMODE_PROTECTION 149
#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150
#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151
#define WLC_UPGRADE 152
#define WLC_GET_MRATE 153
#define WLC_SET_MRATE 154
#define WLC_GET_IGNORE_BCNS 155
#define WLC_SET_IGNORE_BCNS 156
#define WLC_GET_SCB_TIMEOUT 157
#define WLC_SET_SCB_TIMEOUT 158
#define WLC_GET_ASSOCLIST 159
#define WLC_GET_CLK 160
#define WLC_SET_CLK 161
#define WLC_GET_UP 162
#define WLC_OUT 163
#define WLC_GET_WPA_AUTH 164
#define WLC_SET_WPA_AUTH 165
#define WLC_GET_UCFLAGS 166
#define WLC_SET_UCFLAGS 167
#define WLC_GET_PWRIDX 168
#define WLC_SET_PWRIDX 169
#define WLC_GET_TSSI 170
#define WLC_GET_SUP_RATESET_OVERRIDE 171
#define WLC_SET_SUP_RATESET_OVERRIDE 172
#define WLC_SET_FAST_TIMER 173
#define WLC_GET_FAST_TIMER 174
#define WLC_SET_SLOW_TIMER 175
#define WLC_GET_SLOW_TIMER 176
#define WLC_DUMP_PHYREGS 177
#define WLC_GET_GMODE_PROTECTION_CONTROL 178
#define WLC_SET_GMODE_PROTECTION_CONTROL 179
#define WLC_GET_PHYLIST 180
#define WLC_ENCRYPT_STRENGTH 181 /* ndis only */
#define WLC_DECRYPT_STATUS 182 /* ndis only */
#define WLC_GET_KEY_SEQ 183
#define WLC_GET_SCAN_CHANNEL_TIME 184
#define WLC_SET_SCAN_CHANNEL_TIME 185
#define WLC_GET_SCAN_UNASSOC_TIME 186
#define WLC_SET_SCAN_UNASSOC_TIME 187
#define WLC_GET_SCAN_HOME_TIME 188
#define WLC_SET_SCAN_HOME_TIME 189
#define WLC_GET_SCAN_PASSES 190
#define WLC_SET_SCAN_PASSES 191
#define WLC_GET_PRB_RESP_TIMEOUT 192
#define WLC_SET_PRB_RESP_TIMEOUT 193
#define WLC_GET_ATTEN 194
#define WLC_SET_ATTEN 195
#define WLC_GET_SHMEM 196 /* diag */
#define WLC_SET_SHMEM 197 /* diag */
#define WLC_GET_GMODE_PROTECTION_CTS 198
#define WLC_SET_GMODE_PROTECTION_CTS 199
#define WLC_SET_TKIP_MIC_FLAG 200
#define WLC_SCB_DEAUTHENTICATE_FOR_REASON 201
#define WLC_TKIP_COUNTERMEASURES 202
#define WLC_GET_PIOMODE 203
#define WLC_SET_PIOMODE 204
#define WLC_SET_LED 209
#define WLC_GET_LED 210
#define WLC_GET_INTERFERENCE_MODE 211
#define WLC_SET_INTERFERENCE_MODE 212
#define WLC_GET_CHANNEL_QA 213
#define WLC_START_CHANNEL_QA 214
#define WLC_GET_CHANNEL_SEL 215
#define WLC_START_CHANNEL_SEL 216
#define WLC_GET_VALID_CHANNELS 217
#define WLC_GET_FAKEFRAG 218
#define WLC_SET_FAKEFRAG 219
#define WLC_GET_PWROUT_PERCENTAGE 220
#define WLC_SET_PWROUT_PERCENTAGE 221
#define WLC_SET_BAD_FRAME_PREEMPT 222
#define WLC_GET_BAD_FRAME_PREEMPT 223
#define WLC_SET_LEAP_LIST 224
#define WLC_GET_LEAP_LIST 225
#define WLC_GET_CWMIN 226
#define WLC_SET_CWMIN 227
#define WLC_GET_CWMAX 228
#define WLC_SET_CWMAX 229
#define WLC_GET_WET 230
#define WLC_SET_WET 231
#define WLC_GET_KEY_PRIMARY 235
#define WLC_SET_KEY_PRIMARY 236
#define WLC_WDS_GET_REMOTE_HWADDR 246 /* currently handled in wl_linux.c/wl_vx.c */
#define WLC_SET_CS_SCAN_TIMER 248
#define WLC_GET_CS_SCAN_TIMER 249
#define WLC_CURRENT_PWR 256
#define WLC_GET_CHANNELS_IN_COUNTRY 260
#define WLC_GET_COUNTRY_LIST 261
#define WLC_GET_VAR 262 /* get value of named variable */
#define WLC_SET_VAR 263 /* set named variable to value */
#define WLC_NVRAM_GET 264
#define WLC_NVRAM_SET 265
#define WLC_SET_WSEC_PMK 268
#define WLC_GET_AUTH_MODE 269
#define WLC_SET_AUTH_MODE 270
#define WLC_LAST 273 /* do not change - use get_var/set_var */
/*
* Minor kludge alert:
* Duplicate a few definitions that irelay requires from epiioctl.h here
* so caller doesn't have to include this file and epiioctl.h .
* If this grows any more, it would be time to move these irelay-specific
* definitions out of the epiioctl.h and into a separate driver common file.
*/
#ifndef EPICTRL_COOKIE
#define EPICTRL_COOKIE 0xABADCEDE
#endif
/* vx wlc ioctl's offset */
#define CMN_IOCTL_OFF 0x180
/*
* custom OID support
*
* 0xFF - implementation specific OID
* 0xE4 - first byte of Broadcom PCI vendor ID
* 0x14 - second byte of Broadcom PCI vendor ID
* 0xXX - the custom OID number
*/
/* begin 0x1f values beyond the start of the ET driver range. */
#define WL_OID_BASE 0xFFE41420
/* NDIS overrides */
#define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE)
#define OID_WL_GET_FORCELINK (WL_OID_BASE + WLC_GET_FORCELINK)
#define OID_WL_SET_FORCELINK (WL_OID_BASE + WLC_SET_FORCELINK)
#define OID_WL_ENCRYPT_STRENGTH (WL_OID_BASE + WLC_ENCRYPT_STRENGTH)
#define OID_WL_DECRYPT_STATUS (WL_OID_BASE + WLC_DECRYPT_STATUS)
#define WL_DECRYPT_STATUS_SUCCESS 1
#define WL_DECRYPT_STATUS_FAILURE 2
#define WL_DECRYPT_STATUS_UNKNOWN 3
/* allows user-mode app to poll the status of USB image upgrade */
#define WLC_UPGRADE_SUCCESS 0
#define WLC_UPGRADE_PENDING 1
/* Bit masks for radio disabled status - returned by WL_GET_RADIO */
#define WL_RADIO_SW_DISABLE (1<<0)
#define WL_RADIO_HW_DISABLE (1<<1)
/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */
#define WL_TXPWR_OVERRIDE (1<<31)
/* Bus types */
#define WL_SB_BUS 0 /* Silicon Backplane */
#define WL_PCI_BUS 1 /* PCI target */
#define WL_PCMCIA_BUS 2 /* PCMCIA target */
/* band types */
#define WLC_BAND_AUTO 0 /* auto-select */
#define WLC_BAND_A 1 /* "a" band (5 Ghz) */
#define WLC_BAND_B 2 /* "b" band (2.4 Ghz) */
/* MAC list modes */
#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */
#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */
#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */
/* 54g modes (basic bits may still be overridden) */
#define GMODE_LEGACY_B 0 /* Rateset: 1b, 2b, 5.5, 11 */
/* Preamble: Long */
/* Shortslot: Off */
#define GMODE_AUTO 1 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 */
/* Extended Rateset: 6, 9, 12, 48 */
/* Preamble: Long */
/* Shortslot: Auto */
#define GMODE_ONLY 2 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54 */
/* Extended Rateset: 6b, 9, 12b, 48 */
/* Preamble: Short required */
/* Shortslot: Auto */
#define GMODE_B_DEFERRED 3 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 */
/* Extended Rateset: 6, 9, 12, 48 */
/* Preamble: Long */
/* Shortslot: On */
#define GMODE_PERFORMANCE 4 /* Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54 */
/* Preamble: Short required */
/* Shortslot: On and required */
#define GMODE_LRS 5 /* Rateset: 1b, 2b, 5.5b, 11b */
/* Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54 */
/* Preamble: Long */
/* Shortslot: Auto */
#define GMODE_MAX 6
/* values for PLCPHdr_override */
#define WLC_PLCP_AUTO -1
#define WLC_PLCP_SHORT 0
#define WLC_PLCP_LONG 1
/* values for g_protection_override */
#define WLC_G_PROTECTION_AUTO -1
#define WLC_G_PROTECTION_OFF 0
#define WLC_G_PROTECTION_ON 1
/* values for g_protection_control */
#define WLC_G_PROTECTION_CTL_OFF 0
#define WLC_G_PROTECTION_CTL_LOCAL 1
#define WLC_G_PROTECTION_CTL_OVERLAP 2
/* Values for PM */
#define PM_OFF 0
#define PM_MAX 1
#define PM_FAST 2
/* interference mitigation options */
#define INTERFERE_NONE 0 /* off */
#define NON_WLAN 1 /* foreign/non 802.11 interference, no auto detect */
#define WLAN_MANUAL 2 /* ACI: no auto detection */
#define WLAN_AUTO 3 /* ACI: auto - detact */
/* Message levels */
#define WL_ERROR_VAL 0x0001
#define WL_TRACE_VAL 0x0002
#define WL_PRHDRS_VAL 0x0004
#define WL_PRPKT_VAL 0x0008
#define WL_INFORM_VAL 0x0010
#define WL_TMP_VAL 0x0020
#define WL_OID_VAL 0x0040
#define WL_RATE_VAL 0x0080
#define WL_ASSOC_VAL 0x0100
#define WL_PRUSR_VAL 0x0200
#define WL_PS_VAL 0x0400
#define WL_TXPWR_VAL 0x0800
#define WL_GMODE_VAL 0x1000
#define WL_DUAL_VAL 0x2000
#define WL_WSEC_VAL 0x4000
#define WL_WSEC_DUMP_VAL 0x8000
#define WL_LOG_VAL 0x10000
#define WL_NRSSI_VAL 0x20000
#define WL_LOFT_VAL 0x40000
#define WL_REGULATORY_VAL 0x80000
#define WL_ACI_VAL 0x100000
/* 802.11h enforcement levels */
#define SPECT_MNGMT_OFF 0 /* 11h disabled */
#define SPECT_MNGMT_LOOSE 1 /* Allow scan lists to contain non-11h AP */
/* when 11h is enabled */
#define SPECT_MNGMT_STRICT 2 /* Prine out non-11h APs from scan list */
/* max # of leds supported by GPIO (gpio pin# == led index#) */
#define WL_LED_NUMGPIO 16 /* gpio 0-15 */
/* led per-pin behaviors */
#define WL_LED_OFF 0 /* always off */
#define WL_LED_ON 1 /* always on */
#define WL_LED_ACTIVITY 2 /* activity */
#define WL_LED_RADIO 3 /* radio enabled */
#define WL_LED_ARADIO 4 /* 5 Ghz radio enabled */
#define WL_LED_BRADIO 5 /* 2.4Ghz radio enabled */
#define WL_LED_BGMODE 6 /* on if gmode, off if bmode */
#define WL_LED_WI1 7
#define WL_LED_WI2 8
#define WL_LED_WI3 9
#define WL_LED_ASSOC 10 /* associated state indicator */
#define WL_LED_INACTIVE 11 /* null behavior (clears default behavior) */
#define WL_LED_NUMBEHAVIOR 12
/* led behavior numeric value format */
#define WL_LED_BEH_MASK 0x7f /* behavior mask */
#define WL_LED_AL_MASK 0x80 /* activelow (polarity) bit */
/* maximum channels */
#define WL_NUMCHANNELS 64 /* max # of channels in the band */
/* rate check */
#define WL_RATE_OFDM(r) (((r) & 0x7f) == 12 || ((r) & 0x7f) == 18 || \
((r) & 0x7f) == 24 || ((r) & 0x7f) == 36 || \
((r) & 0x7f) == 48 || ((r) & 0x7f) == 72 || \
((r) & 0x7f) == 96 || ((r) & 0x7f) == 108)
/* WDS link local endpoint WPA role */
#define WL_WDS_WPA_ROLE_AUTH 0 /* authenticator */
#define WL_WDS_WPA_ROLE_SUP 1 /* supplicant */
#define WL_WDS_WPA_ROLE_AUTO 255 /* auto, based on mac addr value */
/* afterburner_override */
#define ABO_AUTO -1 /* auto - no override */
#define ABO_OFF 0 /* force afterburner off */
#define ABO_ON 1 /* force afterburner on */
#undef PACKED
#endif /* _wlioctl_h_ */
View Git Blame Copy Permalink