1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-25 20:55:30 +02:00
openwrt-xburst/scripts/arm-magic.sh
kaloz a5471b5250 fixup avila networking, add support for the loft
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7168 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-05-10 11:29:43 +00:00

39 lines
1.7 KiB
Bash
Executable File

#!/usr/bin/env bash
#
# Empty/wrong machtype-workaround generator
#
# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
# based on linux/arch/arm/boot/compressed/head-xscale.S
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
# NOTE: for now it's for only IXP4xx in big endian mode
# list of supported boards, in "boardname machtypeid" format
for board in "avila 526" "gateway7001 731" "nslu2 597" "nas100d 865" "wg302v2 890" "pronghornmetro 1040" "compex 1273" "wrt300nv2 1077" "loft 849"
do
set -- $board
hexid=$(printf %x\\n $2)
if [ "$2" -lt "256" ]; then
# we have a low machtypeid, we just need a "mov" (e3a)
printf "\xe3\xa0\x10\x$hexid" > $BIN_DIR/openwrt-$1-2.6-zImage
else
# we have a high machtypeid, we need a "mov" (e3a) and an "orr" (e38)
printf "\xe3\xa0\x10\x$(echo $hexid|cut -b "2 3")\xe3\x81\x1c\x$(echo $hexid|cut -b 1)" > $BIN_DIR/openwrt-$1-2.6-zImage
fi
# generate the image
cat $BIN_DIR/openwrt-ixp4xx-2.6-zImage >> $BIN_DIR/openwrt-$1-2.6-zImage
done