qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-19 10:57:33 +02:00
Code
c872aa049d
openwrt-xburst/package/iw/patches/001-nl80211_sync.patch
nbd 705a3eff36 iw: sync nl80211 header to fix the multicast rate setting 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24104 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 19:59:13 +00:00

222 lines
9.4 KiB
Diff
Raw Blame History

--- a/nl80211.h
+++ b/nl80211.h
@@ -295,7 +295,9 @@
* auth and assoc steps. For this, you need to specify the SSID in a
* %NL80211_ATTR_SSID attribute, and can optionally specify the association
* IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
- * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_CONTROL_PORT.
+ * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
+ * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
+ * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
* It is also sent as an event, with the BSSID and response IEs when the
* connection is established or failed to be established. This can be
* determined by the STATUS_CODE attribute.
@@ -313,8 +315,8 @@
* channel for the specified amount of time. This can be used to do
* off-channel operations like transmit a Public Action frame and wait for
* a response while being associated to an AP on another channel.
- * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify which
- * radio is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
+ * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus
+ * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
* frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
* optionally used to specify additional channel parameters.
* %NL80211_ATTR_DURATION is used to specify the duration in milliseconds
@@ -385,6 +387,8 @@
* of any other interfaces, and other interfaces will again take
* precedence when they are used.
*
+ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -487,6 +491,7 @@ enum nl80211_commands {
NL80211_CMD_NOTIFY_CQM,
NL80211_CMD_SET_CHANNEL,
+ NL80211_CMD_SET_WDS_PEER,
/* add new commands above here */
@@ -686,6 +691,15 @@ enum nl80211_commands {
* request, the driver will assume that the port is unauthorized until
* authorized by user space. Otherwise, port is marked authorized by
* default in station mode.
+ * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the
+ * ethertype that will be used for key negotiation. It can be
+ * specified with the associate and connect commands. If it is not
+ * specified, the value defaults to 0x888E (PAE, 802.1X). This
+ * attribute is also used as a flag in the wiphy information to
+ * indicate that protocols other than PAE are supported.
+ * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
+ * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
+ * ethertype frames used for key negotiation must not be encrypted.
*
* @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
* We recommend using nested, driver-specific attributes within this.
@@ -787,6 +801,33 @@ enum nl80211_commands {
* This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
* for non-automatic settings.
*
+ * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
+ * means support for per-station GTKs.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
+ * This can be used to mask out antennas which are not attached or should
+ * not be used for transmitting. If an antenna is not selected in this
+ * bitmap the hardware is not allowed to transmit on this antenna.
+ *
+ * Each bit represents one antenna, starting with antenna 1 at the first
+ * bit. Depending on which antennas are selected in the bitmap, 802.11n
+ * drivers can derive which chainmasks to use (if all antennas belonging to
+ * a particular chain are disabled this chain should be disabled) and if
+ * a chain has diversity antennas wether diversity should be used or not.
+ * HT capabilities (STBC, TX Beamforming, Antenna selection) can be
+ * derived from the available chains after applying the antenna mask.
+ * Non-802.11n drivers can derive wether to use diversity or not.
+ * Drivers may reject configurations or RX/TX mask combinations they cannot
+ * support by returning -EINVAL.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
+ * This can be used to mask out antennas which are not attached or should
+ * not be used for receiving. If an antenna is not selected in this bitmap
+ * the hardware should not be configured to receive on this antenna.
+ * For a more detailed descripton see @NL80211_ATTR_WIPHY_ANTENNA_TX.
+ *
+ * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -951,6 +992,16 @@ enum nl80211_attrs {
NL80211_ATTR_RX_FRAME_TYPES,
NL80211_ATTR_FRAME_TYPE,
+ NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
+ NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
+
+ NL80211_ATTR_SUPPORT_IBSS_RSN,
+
+ NL80211_ATTR_WIPHY_ANTENNA_TX,
+ NL80211_ATTR_WIPHY_ANTENNA_RX,
+
+ NL80211_ATTR_MCAST_RATE,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -1006,6 +1057,8 @@ enum nl80211_attrs {
* @NL80211_IFTYPE_WDS: wireless distribution interface
* @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
* @NL80211_IFTYPE_MESH_POINT: mesh point
+ * @NL80211_IFTYPE_P2P_CLIENT: P2P client
+ * @NL80211_IFTYPE_P2P_GO: P2P group owner
* @NL80211_IFTYPE_MAX: highest interface type number currently defined
* @NUM_NL80211_IFTYPES: number of defined interface types
*
@@ -1022,6 +1075,8 @@ enum nl80211_iftype {
NL80211_IFTYPE_WDS,
NL80211_IFTYPE_MONITOR,
NL80211_IFTYPE_MESH_POINT,
+ NL80211_IFTYPE_P2P_CLIENT,
+ NL80211_IFTYPE_P2P_GO,
/* keep last */
NUM_NL80211_IFTYPES,
@@ -1111,6 +1166,8 @@ enum nl80211_rate_info {
* @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
* @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
* station)
+ * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
+ * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
*/
enum nl80211_sta_info {
__NL80211_STA_INFO_INVALID,
@@ -1124,6 +1181,8 @@ enum nl80211_sta_info {
NL80211_STA_INFO_TX_BITRATE,
NL80211_STA_INFO_RX_PACKETS,
NL80211_STA_INFO_TX_PACKETS,
+ NL80211_STA_INFO_TX_RETRIES,
+ NL80211_STA_INFO_TX_FAILED,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
@@ -1277,7 +1336,11 @@ enum nl80211_bitrate_attr {
* wireless core it thinks its knows the regulatory domain we should be in.
* @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
* 802.11 country information element with regulatory information it
- * thinks we should consider.
+ * thinks we should consider. cfg80211 only processes the country
+ * code from the IE, and relies on the regulatory domain information
+ * structure pased by userspace (CRDA) from our wireless-regdb.
+ * If a channel is enabled but the country code indicates it should
+ * be disabled we disable the channel and re-enable it upon disassociation.
*/
enum nl80211_reg_initiator {
NL80211_REGDOM_SET_BY_CORE,
@@ -1382,6 +1445,17 @@ enum nl80211_reg_rule_flags {
* @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
* @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
* @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
+ * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
+ * spent on this channel
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
+ * channel was sensed busy (either due to activity or energy detect)
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
+ * channel was sensed busy
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
+ * receiving data
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
+ * transmitting data
* @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
* currently defined
* @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
@@ -1390,6 +1464,12 @@ enum nl80211_survey_info {
__NL80211_SURVEY_INFO_INVALID,
NL80211_SURVEY_INFO_FREQUENCY,
NL80211_SURVEY_INFO_NOISE,
+ NL80211_SURVEY_INFO_IN_USE,
+ NL80211_SURVEY_INFO_CHANNEL_TIME,
+ NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
+ NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
+ NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
+ NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
/* keep last */
__NL80211_SURVEY_INFO_AFTER_LAST,
@@ -1636,11 +1716,14 @@ enum nl80211_auth_type {
* @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
* @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
* @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
+ * @NUM_NL80211_KEYTYPES: number of defined key types
*/
enum nl80211_key_type {
NL80211_KEYTYPE_GROUP,
NL80211_KEYTYPE_PAIRWISE,
NL80211_KEYTYPE_PEERKEY,
+
+ NUM_NL80211_KEYTYPES
};
/**
@@ -1671,6 +1754,9 @@ enum nl80211_wpa_versions {
* CCMP keys, each six bytes in little endian
* @NL80211_KEY_DEFAULT: flag indicating default key
* @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
+ * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
+ * specified the default depends on whether a MAC address was
+ * given with the command using the key or not (u32)
* @__NL80211_KEY_AFTER_LAST: internal
* @NL80211_KEY_MAX: highest key attribute
*/
@@ -1682,6 +1768,7 @@ enum nl80211_key_attributes {
NL80211_KEY_SEQ,
NL80211_KEY_DEFAULT,
NL80211_KEY_DEFAULT_MGMT,
+ NL80211_KEY_TYPE,
/* keep last */
__NL80211_KEY_AFTER_LAST,
View Git Blame Copy Permalink