1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-09-12 13:23:39 +03:00
openwrt-xburst/package/mac80211/patches/310-ath9k_pending_work.patch
nbd fbe9671879 ath9k: add more pending fixes from linux-wireless@
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24858 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-30 15:48:39 +00:00

271 lines
8.8 KiB
Diff

--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -961,18 +961,6 @@ static void ar5008_hw_rfbus_done(struct
REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0);
}
-static void ar5008_hw_enable_rfkill(struct ath_hw *ah)
-{
- REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
- AR_GPIO_INPUT_EN_VAL_RFSILENT_BB);
-
- REG_CLR_BIT(ah, AR_GPIO_INPUT_MUX2,
- AR_GPIO_INPUT_MUX2_RFSILENT);
-
- ath9k_hw_cfg_gpio_input(ah, ah->rfkill_gpio);
- REG_SET_BIT(ah, AR_PHY_TEST, RFSILENT_BB);
-}
-
static void ar5008_restore_chainmask(struct ath_hw *ah)
{
int rx_chainmask = ah->rxchainmask;
@@ -1629,7 +1617,6 @@ void ar5008_hw_attach_phy_ops(struct ath
priv_ops->set_delta_slope = ar5008_hw_set_delta_slope;
priv_ops->rfbus_req = ar5008_hw_rfbus_req;
priv_ops->rfbus_done = ar5008_hw_rfbus_done;
- priv_ops->enable_rfkill = ar5008_hw_enable_rfkill;
priv_ops->restore_chainmask = ar5008_restore_chainmask;
priv_ops->set_diversity = ar5008_set_diversity;
priv_ops->do_getnf = ar5008_hw_do_getnf;
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -745,28 +745,6 @@ static void ar9003_hw_rfbus_done(struct
REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0);
}
-/*
- * Set the interrupt and GPIO values so the ISR can disable RF
- * on a switch signal. Assumes GPIO port and interrupt polarity
- * are set prior to call.
- */
-static void ar9003_hw_enable_rfkill(struct ath_hw *ah)
-{
- /* Connect rfsilent_bb_l to baseband */
- REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
- AR_GPIO_INPUT_EN_VAL_RFSILENT_BB);
- /* Set input mux for rfsilent_bb_l to GPIO #0 */
- REG_CLR_BIT(ah, AR_GPIO_INPUT_MUX2,
- AR_GPIO_INPUT_MUX2_RFSILENT);
-
- /*
- * Configure the desired GPIO port for input and
- * enable baseband rf silence.
- */
- ath9k_hw_cfg_gpio_input(ah, ah->rfkill_gpio);
- REG_SET_BIT(ah, AR_PHY_TEST, RFSILENT_BB);
-}
-
static void ar9003_hw_set_diversity(struct ath_hw *ah, bool value)
{
u32 v = REG_READ(ah, AR_PHY_CCK_DETECT);
@@ -1203,7 +1181,6 @@ void ar9003_hw_attach_phy_ops(struct ath
priv_ops->set_delta_slope = ar9003_hw_set_delta_slope;
priv_ops->rfbus_req = ar9003_hw_rfbus_req;
priv_ops->rfbus_done = ar9003_hw_rfbus_done;
- priv_ops->enable_rfkill = ar9003_hw_enable_rfkill;
priv_ops->set_diversity = ar9003_hw_set_diversity;
priv_ops->ani_control = ar9003_hw_ani_control;
priv_ops->do_getnf = ar9003_hw_do_getnf;
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -189,6 +189,7 @@ struct ath_txq {
struct list_head axq_q;
spinlock_t axq_lock;
u32 axq_depth;
+ u32 axq_ampdu_depth;
bool stopped;
bool axq_tx_inprogress;
struct list_head axq_acq;
--- a/drivers/net/wireless/ath/ath9k/hw-ops.h
+++ b/drivers/net/wireless/ath/ath9k/hw-ops.h
@@ -223,11 +223,6 @@ static inline void ath9k_hw_rfbus_done(s
return ath9k_hw_private_ops(ah)->rfbus_done(ah);
}
-static inline void ath9k_enable_rfkill(struct ath_hw *ah)
-{
- return ath9k_hw_private_ops(ah)->enable_rfkill(ah);
-}
-
static inline void ath9k_hw_restore_chainmask(struct ath_hw *ah)
{
if (!ath9k_hw_private_ops(ah)->restore_chainmask)
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -491,6 +491,17 @@ static int __ath9k_hw_init(struct ath_hw
if (ah->hw_version.devid == AR5416_AR9100_DEVID)
ah->hw_version.macVersion = AR_SREV_VERSION_9100;
+ ath9k_hw_read_revisions(ah);
+
+ /*
+ * Read back AR_WA into a permanent copy and set bits 14 and 17.
+ * We need to do this to avoid RMW of this register. We cannot
+ * read the reg when chip is asleep.
+ */
+ ah->WARegVal = REG_READ(ah, AR_WA);
+ ah->WARegVal |= (AR_WA_D3_L1_DISABLE |
+ AR_WA_ASPM_TIMER_BASED_DISABLE);
+
if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON)) {
ath_err(common, "Couldn't reset chip\n");
return -EIO;
@@ -559,14 +570,6 @@ static int __ath9k_hw_init(struct ath_hw
ath9k_hw_init_mode_regs(ah);
- /*
- * Read back AR_WA into a permanent copy and set bits 14 and 17.
- * We need to do this to avoid RMW of this register. We cannot
- * read the reg when chip is asleep.
- */
- ah->WARegVal = REG_READ(ah, AR_WA);
- ah->WARegVal |= (AR_WA_D3_L1_DISABLE |
- AR_WA_ASPM_TIMER_BASED_DISABLE);
if (ah->is_pciexpress)
ath9k_hw_configpcipowersave(ah, 0, 0);
@@ -1078,8 +1081,6 @@ static bool ath9k_hw_set_reset_power_on(
return false;
}
- ath9k_hw_read_revisions(ah);
-
return ath9k_hw_set_reset(ah, ATH9K_RESET_WARM);
}
@@ -1399,7 +1400,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
ath9k_hw_init_qos(ah);
if (ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
- ath9k_enable_rfkill(ah);
+ ath9k_hw_cfg_gpio_input(ah, ah->rfkill_gpio);
ath9k_hw_init_global_settings(ah);
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -576,7 +576,6 @@ struct ath_hw_private_ops {
void (*set_delta_slope)(struct ath_hw *ah, struct ath9k_channel *chan);
bool (*rfbus_req)(struct ath_hw *ah);
void (*rfbus_done)(struct ath_hw *ah);
- void (*enable_rfkill)(struct ath_hw *ah);
void (*restore_chainmask)(struct ath_hw *ah);
void (*set_diversity)(struct ath_hw *ah, bool value);
u32 (*compute_pll_control)(struct ath_hw *ah,
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -838,7 +838,7 @@ static void ath_tx_sched_aggr(struct ath
ath_tx_txqaddbuf(sc, txq, &bf_q);
TX_STAT_INC(txq->axq_qnum, a_aggr);
- } while (txq->axq_depth < ATH_AGGR_MIN_QDEPTH &&
+ } while (txq->axq_ampdu_depth < ATH_AGGR_MIN_QDEPTH &&
status != ATH_AGGR_BAW_CLOSED);
}
@@ -999,6 +999,7 @@ struct ath_txq *ath_txq_setup(struct ath
INIT_LIST_HEAD(&txq->axq_acq);
spin_lock_init(&txq->axq_lock);
txq->axq_depth = 0;
+ txq->axq_ampdu_depth = 0;
txq->axq_tx_inprogress = false;
sc->tx.txqsetup |= 1<<qnum;
@@ -1068,6 +1069,12 @@ int ath_cabq_update(struct ath_softc *sc
return 0;
}
+static bool bf_is_ampdu_not_probing(struct ath_buf *bf)
+{
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(bf->bf_mpdu);
+ return bf_isampdu(bf) && !(info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE);
+}
+
/*
* Drain a given TX queue (could be Beacon or Data)
*
@@ -1126,7 +1133,8 @@ void ath_draintxq(struct ath_softc *sc,
}
txq->axq_depth--;
-
+ if (bf_is_ampdu_not_probing(bf))
+ txq->axq_ampdu_depth--;
spin_unlock_bh(&txq->axq_lock);
if (bf_isampdu(bf))
@@ -1316,6 +1324,8 @@ static void ath_tx_txqaddbuf(struct ath_
ath9k_hw_txstart(ah, txq->axq_qnum);
}
txq->axq_depth++;
+ if (bf_is_ampdu_not_probing(bf))
+ txq->axq_ampdu_depth++;
}
static void ath_tx_send_ampdu(struct ath_softc *sc, struct ath_atx_tid *tid,
@@ -1336,7 +1346,7 @@ static void ath_tx_send_ampdu(struct ath
*/
if (!list_empty(&tid->buf_q) || tid->paused ||
!BAW_WITHIN(tid->seq_start, tid->baw_size, fi->seqno) ||
- txctl->txq->axq_depth >= ATH_AGGR_MIN_QDEPTH) {
+ txctl->txq->axq_ampdu_depth >= ATH_AGGR_MIN_QDEPTH) {
/*
* Add this frame to software queue for scheduling later
* for aggregation.
@@ -2040,6 +2050,9 @@ static void ath_tx_processq(struct ath_s
txq->axq_tx_inprogress = false;
if (bf_held)
list_del(&bf_held->list);
+
+ if (bf_is_ampdu_not_probing(bf))
+ txq->axq_ampdu_depth--;
spin_unlock_bh(&txq->axq_lock);
if (bf_held)
@@ -2168,6 +2181,8 @@ void ath_tx_edma_tasklet(struct ath_soft
INCR(txq->txq_tailidx, ATH_TXFIFO_DEPTH);
txq->axq_depth--;
txq->axq_tx_inprogress = false;
+ if (bf_is_ampdu_not_probing(bf))
+ txq->axq_ampdu_depth--;
spin_unlock_bh(&txq->axq_lock);
txok = !(txs.ts_status & ATH9K_TXERR_MASK);
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -714,8 +714,7 @@ static void ath9k_set_hw_capab(struct at
IEEE80211_HW_HAS_RATE_CONTROL |
IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SUPPORTS_PS |
- IEEE80211_HW_PS_NULLFUNC_STACK |
- IEEE80211_HW_NEED_DTIM_PERIOD;
+ IEEE80211_HW_PS_NULLFUNC_STACK;
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_STATION) |
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -646,8 +646,7 @@ void ath9k_set_hw_capab(struct ath_softc
IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_PS_NULLFUNC_STACK |
IEEE80211_HW_SPECTRUM_MGMT |
- IEEE80211_HW_REPORTS_TX_ACK_STATUS |
- IEEE80211_HW_NEED_DTIM_PERIOD;
+ IEEE80211_HW_REPORTS_TX_ACK_STATUS;
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT)
hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -285,7 +285,8 @@ int ath_set_channel(struct ath_softc *sc
ath9k_hw_set_interrupts(ah, ah->imask);
if (!(sc->sc_flags & (SC_OP_OFFCHANNEL))) {
- ath_beacon_config(sc, NULL);
+ if (sc->sc_flags & SC_OP_BEACONS)
+ ath_beacon_config(sc, NULL);
ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
ath_start_ani(common);
}