mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-09-12 05:47:07 +03:00
This is the bcm57xx package. I have tested default vlan functions, but I dont have the equipment to test more advanced setups. The default vlan setup seems to be working fine. I also added the activate_gpio parameter which will make the driver activate the switch via gpio before probing for it. I'm not sure which method is best for autoload. For the wrt350n, I need the activate_gpio parameter. But its probably not a good idea to add that to the autoload file. On a system without a bcm57xx switch, isn't it a bad idea to mess with the gpios looking for the switch? Ideally, wouldn't it be best to load the bcm57xx module from broadcom-diag, after it has determined which router its on? I tried using 'request_module' from there, but had no success. For now, I am relying on preinit to load the bcm57xx module with activate_gpio param, after it has failed to load switch_robo and switch_adm. Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11471 3c298f89-4303-0410-b956-a3cf2f4a3e73
484 lines
20 KiB
C
484 lines
20 KiB
C
/******************************************************************************/
|
|
/* */
|
|
/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 - 2004 Broadcom */
|
|
/* Corporation. */
|
|
/* All rights reserved. */
|
|
/* */
|
|
/* This program is free software; you can redistribute it and/or modify */
|
|
/* it under the terms of the GNU General Public License as published by */
|
|
/* the Free Software Foundation, located in the file LICENSE. */
|
|
/* */
|
|
/* History: */
|
|
/* 02/25/00 Hav Khauv Initial version. */
|
|
/******************************************************************************/
|
|
|
|
#ifndef LM_H
|
|
#define LM_H
|
|
|
|
#include "queue.h"
|
|
#include "bits.h"
|
|
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Basic types. */
|
|
/******************************************************************************/
|
|
|
|
typedef char LM_CHAR, *PLM_CHAR;
|
|
typedef unsigned int LM_UINT, *PLM_UINT;
|
|
typedef unsigned char LM_UINT8, *PLM_UINT8;
|
|
typedef unsigned short LM_UINT16, *PLM_UINT16;
|
|
typedef unsigned int LM_UINT32, *PLM_UINT32;
|
|
typedef unsigned int LM_COUNTER, *PLM_COUNTER;
|
|
typedef void LM_VOID, *PLM_VOID;
|
|
typedef char LM_BOOL, *PLM_BOOL;
|
|
|
|
/* 64bit value. */
|
|
typedef struct {
|
|
#ifdef BIG_ENDIAN_HOST
|
|
LM_UINT32 High;
|
|
LM_UINT32 Low;
|
|
#else /* BIG_ENDIAN_HOST */
|
|
LM_UINT32 Low;
|
|
LM_UINT32 High;
|
|
#endif /* !BIG_ENDIAN_HOST */
|
|
} LM_UINT64, *PLM_UINT64;
|
|
|
|
typedef LM_UINT64 LM_PHYSICAL_ADDRESS, *PLM_PHYSICAL_ADDRESS;
|
|
|
|
/* void LM_INC_PHYSICAL_ADDRESS(PLM_PHYSICAL_ADDRESS pAddr,LM_UINT32 IncSize) */
|
|
#define LM_INC_PHYSICAL_ADDRESS(pAddr, IncSize) \
|
|
{ \
|
|
LM_UINT32 OrgLow; \
|
|
\
|
|
OrgLow = (pAddr)->Low; \
|
|
(pAddr)->Low += IncSize; \
|
|
if((pAddr)->Low < OrgLow) { \
|
|
(pAddr)->High++; /* Wrap around. */ \
|
|
} \
|
|
}
|
|
|
|
|
|
#ifndef TRUE
|
|
#define TRUE 1
|
|
#endif /* TRUE */
|
|
|
|
#ifndef FALSE
|
|
#define FALSE 0
|
|
#endif /* FALSE */
|
|
|
|
#ifndef NULL
|
|
#define NULL ((void *) 0)
|
|
#endif /* NULL */
|
|
|
|
#ifndef OFFSETOF
|
|
#define OFFSETOF(_s, _m) (MM_UINT_PTR(&(((_s *) 0)->_m)))
|
|
#endif /* OFFSETOF */
|
|
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Simple macros. */
|
|
/******************************************************************************/
|
|
|
|
#define IS_ETH_BROADCAST(_pEthAddr) \
|
|
(((unsigned char *) (_pEthAddr))[0] == ((unsigned char) 0xff))
|
|
|
|
#define IS_ETH_MULTICAST(_pEthAddr) \
|
|
(((unsigned char *) (_pEthAddr))[0] & ((unsigned char) 0x01))
|
|
|
|
#define IS_ETH_ADDRESS_EQUAL(_pEtherAddr1, _pEtherAddr2) \
|
|
((((unsigned char *) (_pEtherAddr1))[0] == \
|
|
((unsigned char *) (_pEtherAddr2))[0]) && \
|
|
(((unsigned char *) (_pEtherAddr1))[1] == \
|
|
((unsigned char *) (_pEtherAddr2))[1]) && \
|
|
(((unsigned char *) (_pEtherAddr1))[2] == \
|
|
((unsigned char *) (_pEtherAddr2))[2]) && \
|
|
(((unsigned char *) (_pEtherAddr1))[3] == \
|
|
((unsigned char *) (_pEtherAddr2))[3]) && \
|
|
(((unsigned char *) (_pEtherAddr1))[4] == \
|
|
((unsigned char *) (_pEtherAddr2))[4]) && \
|
|
(((unsigned char *) (_pEtherAddr1))[5] == \
|
|
((unsigned char *) (_pEtherAddr2))[5]))
|
|
|
|
#define COPY_ETH_ADDRESS(_Src, _Dst) \
|
|
((unsigned char *) (_Dst))[0] = ((unsigned char *) (_Src))[0]; \
|
|
((unsigned char *) (_Dst))[1] = ((unsigned char *) (_Src))[1]; \
|
|
((unsigned char *) (_Dst))[2] = ((unsigned char *) (_Src))[2]; \
|
|
((unsigned char *) (_Dst))[3] = ((unsigned char *) (_Src))[3]; \
|
|
((unsigned char *) (_Dst))[4] = ((unsigned char *) (_Src))[4]; \
|
|
((unsigned char *) (_Dst))[5] = ((unsigned char *) (_Src))[5];
|
|
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Constants. */
|
|
/******************************************************************************/
|
|
|
|
#define ETHERNET_ADDRESS_SIZE 6
|
|
#define ETHERNET_PACKET_HEADER_SIZE 14
|
|
#define MIN_ETHERNET_PACKET_SIZE 64 /* with 4 byte crc. */
|
|
#define MAX_ETHERNET_PACKET_SIZE 1518 /* with 4 byte crc. */
|
|
#define MIN_ETHERNET_PACKET_SIZE_NO_CRC 60
|
|
#define MAX_ETHERNET_PACKET_SIZE_NO_CRC 1514
|
|
#define MAX_ETHERNET_PACKET_BUFFER_SIZE 1536 /* A nice even number. */
|
|
#define MAX_ETHERNET_JUMBO_PACKET_SIZE_NO_CRC 9014
|
|
|
|
#ifndef LM_MAX_MC_TABLE_SIZE
|
|
#define LM_MAX_MC_TABLE_SIZE 32
|
|
#endif /* LM_MAX_MC_TABLE_SIZE */
|
|
#define LM_MC_ENTRY_SIZE (ETHERNET_ADDRESS_SIZE+1)
|
|
#define LM_MC_INSTANCE_COUNT_INDEX (LM_MC_ENTRY_SIZE-1)
|
|
|
|
|
|
/* Receive filter masks. */
|
|
#define LM_ACCEPT_UNICAST 0x0001
|
|
#define LM_ACCEPT_MULTICAST 0x0002
|
|
#define LM_ACCEPT_ALL_MULTICAST 0x0004
|
|
#define LM_ACCEPT_BROADCAST 0x0008
|
|
#define LM_ACCEPT_ERROR_PACKET 0x0010
|
|
#define LM_KEEP_VLAN_TAG 0x0020
|
|
|
|
#define LM_PROMISCUOUS_MODE 0x10000
|
|
|
|
|
|
|
|
/******************************************************************************/
|
|
/* PCI registers. */
|
|
/******************************************************************************/
|
|
|
|
#define PCI_VENDOR_ID_REG 0x00
|
|
#define PCI_DEVICE_ID_REG 0x02
|
|
|
|
#define PCI_COMMAND_REG 0x04
|
|
#define PCI_IO_SPACE_ENABLE 0x0001
|
|
#define PCI_MEM_SPACE_ENABLE 0x0002
|
|
#define PCI_BUSMASTER_ENABLE 0x0004
|
|
#define PCI_MEMORY_WRITE_INVALIDATE 0x0010
|
|
#define PCI_PARITY_ERROR_ENABLE 0x0040
|
|
#define PCI_SYSTEM_ERROR_ENABLE 0x0100
|
|
#define PCI_FAST_BACK_TO_BACK_ENABLE 0x0200
|
|
|
|
#define PCI_STATUS_REG 0x06
|
|
#define PCI_REV_ID_REG 0x08
|
|
|
|
#define PCI_CACHE_LINE_SIZE_REG 0x0c
|
|
|
|
#define PCI_IO_BASE_ADDR_REG 0x10
|
|
#define PCI_IO_BASE_ADDR_MASK 0xfffffff0
|
|
|
|
#define PCI_MEM_BASE_ADDR_LOW 0x10
|
|
#define PCI_MEM_BASE_ADDR_HIGH 0x14
|
|
|
|
#define PCI_SUBSYSTEM_VENDOR_ID_REG 0x2c
|
|
#define PCI_SUBSYSTEM_ID_REG 0x2e
|
|
#define PCI_INT_LINE_REG 0x3c
|
|
|
|
#define PCIX_CAP_REG 0x40
|
|
#define PCIX_ENABLE_RELAXED_ORDERING BIT_17
|
|
|
|
/******************************************************************************/
|
|
/* Fragment structure. */
|
|
/******************************************************************************/
|
|
|
|
typedef struct {
|
|
LM_UINT32 FragSize;
|
|
LM_PHYSICAL_ADDRESS FragBuf;
|
|
} LM_FRAG, *PLM_FRAG;
|
|
|
|
typedef struct {
|
|
/* FragCount is initialized for the caller to the maximum array size, on */
|
|
/* return FragCount is the number of the actual fragments in the array. */
|
|
LM_UINT32 FragCount;
|
|
|
|
/* Total buffer size. */
|
|
LM_UINT32 TotalSize;
|
|
|
|
/* Fragment array buffer. */
|
|
LM_FRAG Fragments[1];
|
|
} LM_FRAG_LIST, *PLM_FRAG_LIST;
|
|
|
|
#define DECLARE_FRAG_LIST_BUFFER_TYPE(_FRAG_LIST_TYPE_NAME, _MAX_FRAG_COUNT) \
|
|
typedef struct { \
|
|
LM_FRAG_LIST FragList; \
|
|
LM_FRAG FragListBuffer[_MAX_FRAG_COUNT-1]; \
|
|
} _FRAG_LIST_TYPE_NAME, *P##_FRAG_LIST_TYPE_NAME
|
|
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Status codes. */
|
|
/******************************************************************************/
|
|
|
|
#define LM_STATUS_SUCCESS 0
|
|
#define LM_STATUS_FAILURE 1
|
|
|
|
#define LM_STATUS_INTERRUPT_ACTIVE 2
|
|
#define LM_STATUS_INTERRUPT_NOT_ACTIVE 3
|
|
|
|
#define LM_STATUS_LINK_ACTIVE 4
|
|
#define LM_STATUS_LINK_DOWN 5
|
|
#define LM_STATUS_LINK_SETTING_MISMATCH 6
|
|
|
|
#define LM_STATUS_TOO_MANY_FRAGMENTS 7
|
|
#define LM_STATUS_TRANSMIT_ABORTED 8
|
|
#define LM_STATUS_TRANSMIT_ERROR 9
|
|
#define LM_STATUS_RECEIVE_ABORTED 10
|
|
#define LM_STATUS_RECEIVE_ERROR 11
|
|
#define LM_STATUS_INVALID_PACKET_SIZE 12
|
|
#define LM_STATUS_OUT_OF_MAP_REGISTERS 13
|
|
#define LM_STATUS_UNKNOWN_ADAPTER 14
|
|
|
|
typedef LM_UINT LM_STATUS, *PLM_STATUS;
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Line speed. */
|
|
/******************************************************************************/
|
|
|
|
#define LM_LINE_SPEED_UNKNOWN 0
|
|
#define LM_LINE_SPEED_AUTO LM_LINE_SPEED_UNKNOWN
|
|
#define LM_LINE_SPEED_10MBPS 10
|
|
#define LM_LINE_SPEED_100MBPS 100
|
|
#define LM_LINE_SPEED_1000MBPS 1000
|
|
|
|
typedef LM_UINT32 LM_LINE_SPEED, *PLM_LINE_SPEED;
|
|
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Duplex mode. */
|
|
/******************************************************************************/
|
|
|
|
#define LM_DUPLEX_MODE_UNKNOWN 0
|
|
#define LM_DUPLEX_MODE_HALF 1
|
|
#define LM_DUPLEX_MODE_FULL 2
|
|
|
|
typedef LM_UINT32 LM_DUPLEX_MODE, *PLM_DUPLEX_MODE;
|
|
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Power state. */
|
|
/******************************************************************************/
|
|
|
|
#define LM_POWER_STATE_D0 0
|
|
#define LM_POWER_STATE_D1 1
|
|
#define LM_POWER_STATE_D2 2
|
|
#define LM_POWER_STATE_D3 3
|
|
|
|
typedef LM_UINT32 LM_POWER_STATE, *PLM_POWER_STATE;
|
|
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Task offloading. */
|
|
/******************************************************************************/
|
|
|
|
#define LM_TASK_OFFLOAD_NONE 0x0000
|
|
#define LM_TASK_OFFLOAD_TX_IP_CHECKSUM 0x0001
|
|
#define LM_TASK_OFFLOAD_RX_IP_CHECKSUM 0x0002
|
|
#define LM_TASK_OFFLOAD_TX_TCP_CHECKSUM 0x0004
|
|
#define LM_TASK_OFFLOAD_RX_TCP_CHECKSUM 0x0008
|
|
#define LM_TASK_OFFLOAD_TX_UDP_CHECKSUM 0x0010
|
|
#define LM_TASK_OFFLOAD_RX_UDP_CHECKSUM 0x0020
|
|
#define LM_TASK_OFFLOAD_TCP_SEGMENTATION 0x0040
|
|
|
|
typedef LM_UINT32 LM_TASK_OFFLOAD, *PLM_TASK_OFFLOAD;
|
|
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Flow control. */
|
|
/******************************************************************************/
|
|
|
|
#define LM_FLOW_CONTROL_NONE 0x00
|
|
#define LM_FLOW_CONTROL_RECEIVE_PAUSE 0x01
|
|
#define LM_FLOW_CONTROL_TRANSMIT_PAUSE 0x02
|
|
#define LM_FLOW_CONTROL_RX_TX_PAUSE (LM_FLOW_CONTROL_RECEIVE_PAUSE | \
|
|
LM_FLOW_CONTROL_TRANSMIT_PAUSE)
|
|
|
|
/* This value can be or-ed with RECEIVE_PAUSE and TRANSMIT_PAUSE. If the */
|
|
/* auto-negotiation is disabled and the RECEIVE_PAUSE and TRANSMIT_PAUSE */
|
|
/* bits are set, then flow control is enabled regardless of link partner's */
|
|
/* flow control capability. */
|
|
#define LM_FLOW_CONTROL_AUTO_PAUSE 0x80000000
|
|
|
|
typedef LM_UINT32 LM_FLOW_CONTROL, *PLM_FLOW_CONTROL;
|
|
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Wake up mode. */
|
|
/******************************************************************************/
|
|
|
|
#define LM_WAKE_UP_MODE_NONE 0
|
|
#define LM_WAKE_UP_MODE_MAGIC_PACKET 1
|
|
#define LM_WAKE_UP_MODE_NWUF 2
|
|
#define LM_WAKE_UP_MODE_LINK_CHANGE 4
|
|
|
|
typedef LM_UINT32 LM_WAKE_UP_MODE, *PLM_WAKE_UP_MODE;
|
|
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Counters. */
|
|
/******************************************************************************/
|
|
|
|
#define LM_COUNTER_FRAMES_XMITTED_OK 0
|
|
#define LM_COUNTER_FRAMES_RECEIVED_OK 1
|
|
#define LM_COUNTER_ERRORED_TRANSMIT_COUNT 2
|
|
#define LM_COUNTER_ERRORED_RECEIVE_COUNT 3
|
|
#define LM_COUNTER_RCV_CRC_ERROR 4
|
|
#define LM_COUNTER_ALIGNMENT_ERROR 5
|
|
#define LM_COUNTER_SINGLE_COLLISION_FRAMES 6
|
|
#define LM_COUNTER_MULTIPLE_COLLISION_FRAMES 7
|
|
#define LM_COUNTER_FRAMES_DEFERRED 8
|
|
#define LM_COUNTER_MAX_COLLISIONS 9
|
|
#define LM_COUNTER_RCV_OVERRUN 10
|
|
#define LM_COUNTER_XMIT_UNDERRUN 11
|
|
#define LM_COUNTER_UNICAST_FRAMES_XMIT 12
|
|
#define LM_COUNTER_MULTICAST_FRAMES_XMIT 13
|
|
#define LM_COUNTER_BROADCAST_FRAMES_XMIT 14
|
|
#define LM_COUNTER_UNICAST_FRAMES_RCV 15
|
|
#define LM_COUNTER_MULTICAST_FRAMES_RCV 16
|
|
#define LM_COUNTER_BROADCAST_FRAMES_RCV 17
|
|
|
|
typedef LM_UINT32 LM_COUNTER_TYPE, *PLM_COUNTER_TYPE;
|
|
|
|
|
|
typedef LM_UINT32 LM_RESET_TYPE;
|
|
#define LM_SHUTDOWN_RESET 0
|
|
#define LM_INIT_RESET 1
|
|
#define LM_SUSPEND_RESET 2
|
|
|
|
/******************************************************************************/
|
|
/* Forward definition. */
|
|
/******************************************************************************/
|
|
|
|
typedef struct _LM_DEVICE_BLOCK *PLM_DEVICE_BLOCK;
|
|
typedef struct _LM_PACKET *PLM_PACKET;
|
|
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Function prototypes. */
|
|
/******************************************************************************/
|
|
|
|
LM_STATUS LM_GetAdapterInfo(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS LM_InitializeAdapter(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS LM_ResetAdapter(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS LM_DisableInterrupt(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS LM_EnableInterrupt(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS LM_SendPacket(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
|
|
LM_STATUS LM_ServiceInterrupts(PLM_DEVICE_BLOCK pDevice);
|
|
#ifdef BCM_NAPI_RXPOLL
|
|
int LM_ServiceRxPoll(PLM_DEVICE_BLOCK pDevice, int limit);
|
|
#endif
|
|
LM_STATUS LM_QueueRxPackets(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS LM_SetReceiveMask(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Mask);
|
|
LM_STATUS LM_Halt(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS LM_Abort(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS LM_MulticastAdd(PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMcAddress);
|
|
LM_STATUS LM_MulticastDel(PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMcAddress);
|
|
LM_STATUS LM_MulticastClear(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS LM_SetMacAddress(PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMacAddress);
|
|
LM_STATUS LM_LoopbackAddress(PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pAddress);
|
|
|
|
LM_UINT32 LM_GetCrcCounter(PLM_DEVICE_BLOCK pDevice);
|
|
|
|
LM_WAKE_UP_MODE LM_PMCapabilities(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS LM_NwufAdd(PLM_DEVICE_BLOCK pDevice, LM_UINT32 ByteMaskSize,
|
|
LM_UINT8 *pByteMask, LM_UINT8 *pPattern);
|
|
LM_STATUS LM_NwufRemove(PLM_DEVICE_BLOCK pDevice, LM_UINT32 ByteMaskSize,
|
|
LM_UINT8 *pByteMask, LM_UINT8 *pPattern);
|
|
LM_STATUS LM_SetPowerState(PLM_DEVICE_BLOCK pDevice, LM_POWER_STATE PowerLevel);
|
|
|
|
LM_VOID LM_ReadPhy(PLM_DEVICE_BLOCK pDevice, LM_UINT32 PhyReg,
|
|
PLM_UINT32 pData32);
|
|
LM_VOID LM_WritePhy(PLM_DEVICE_BLOCK pDevice, LM_UINT32 PhyReg,
|
|
LM_UINT32 Data32);
|
|
|
|
/* MII read/write functions to export to the robo support code */
|
|
LM_UINT16 robo_miird(void *h, int phyadd, int regoff);
|
|
void robo_miiwr(void *h, int phyadd, int regoff, LM_UINT16 value);
|
|
|
|
|
|
LM_STATUS LM_EnableMacLoopBack(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS LM_DisableMacLoopBack(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS LM_EnablePhyLoopBack(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS LM_DisablePhyLoopBack(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS LM_EnableExtLoopBack(PLM_DEVICE_BLOCK pDevice, LM_LINE_SPEED Speed);
|
|
LM_STATUS LM_DisableExtLoopBack(PLM_DEVICE_BLOCK pDevice);
|
|
|
|
LM_STATUS LM_SetupPhy(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS LM_BlinkLED(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlinkDuration);
|
|
LM_STATUS LM_GetStats(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS LM_NvramRead(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
|
|
LM_UINT32 *pData);
|
|
LM_STATUS LM_NvramWriteBlock(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
|
|
LM_UINT32 *pData, LM_UINT32 Size);
|
|
LM_VOID LM_ResetPhy(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS LM_ShutdownChip(PLM_DEVICE_BLOCK pDevice, LM_RESET_TYPE Mode);
|
|
LM_STATUS LM_HaltCpu(PLM_DEVICE_BLOCK pDevice,LM_UINT32 cpu_number);
|
|
LM_UINT32 ComputeCrc32(LM_UINT8 *pBuffer, LM_UINT32 BufferSize);
|
|
LM_STATUS LM_SwitchClocks(PLM_DEVICE_BLOCK pDevice);
|
|
|
|
void LM_5714_FamForceFiber( PLM_DEVICE_BLOCK pDevice);
|
|
void LM_5714_FamGoFiberAutoNeg( PLM_DEVICE_BLOCK pDevice);
|
|
void LM_5714_FamFiberCheckLink( PLM_DEVICE_BLOCK pDevice);
|
|
|
|
/******************************************************************************/
|
|
/* These are the OS specific functions called by LMAC. */
|
|
/******************************************************************************/
|
|
|
|
LM_STATUS MM_ReadConfig16(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
|
|
LM_UINT16 *pValue16);
|
|
LM_STATUS MM_WriteConfig16(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
|
|
LM_UINT16 Value16);
|
|
LM_STATUS MM_ReadConfig32(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
|
|
LM_UINT32 *pValue32);
|
|
LM_STATUS MM_WriteConfig32(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
|
|
LM_UINT32 Value32);
|
|
LM_STATUS MM_MapMemBase(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS MM_MapIoBase(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS MM_IndicateRxPackets(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS MM_IndicateTxPackets(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS MM_StartTxDma(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
|
|
LM_STATUS MM_CompleteTxDma(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
|
|
LM_STATUS MM_AllocateMemory(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize,
|
|
PLM_VOID *pMemoryBlockVirt);
|
|
LM_STATUS MM_AllocateSharedMemory(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize,
|
|
PLM_VOID *pMemoryBlockVirt, PLM_PHYSICAL_ADDRESS pMemoryBlockPhy,
|
|
LM_BOOL Cached);
|
|
LM_STATUS MM_GetConfig(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS MM_IndicateStatus(PLM_DEVICE_BLOCK pDevice, LM_STATUS Status);
|
|
LM_STATUS MM_InitializeUmPackets(PLM_DEVICE_BLOCK pDevice);
|
|
LM_STATUS MM_FreeRxBuffer(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
|
|
LM_STATUS MM_CoalesceTxBuffer(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
|
|
PLM_DEVICE_BLOCK MM_FindPeerDev(PLM_DEVICE_BLOCK pDevice);
|
|
int MM_FindCapability(PLM_DEVICE_BLOCK pDevice, int capability);
|
|
LM_VOID MM_UnmapRxDma(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
|
|
#ifdef BCM_NAPI_RXPOLL
|
|
LM_STATUS MM_ScheduleRxPoll(PLM_DEVICE_BLOCK pDevice);
|
|
#endif
|
|
LM_STATUS MM_Sleep(PLM_DEVICE_BLOCK pDevice, LM_UINT32 msec);
|
|
LM_STATUS LM_MbufWorkAround(PLM_DEVICE_BLOCK pDevice);
|
|
|
|
#ifdef INCLUDE_5703_A0_FIX
|
|
LM_STATUS LM_Load5703DmaWFirmware(PLM_DEVICE_BLOCK pDevice);
|
|
#endif
|
|
|
|
/* Debugging support */
|
|
|
|
extern int b57_msg_level;
|
|
|
|
#define B57_ERR_VAL 1
|
|
#define B57_INFO_VAL 2
|
|
|
|
#define B57_ERR(args) do {if (b57_msg_level & B57_ERR_VAL) printf args;} while (0)
|
|
#define B57_INFO(args) do {if (b57_msg_level & B57_INFO_VAL) printf args;} while (0)
|
|
|
|
#endif /* LM_H */
|
|
|