mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-24 15:25:20 +02:00
57ffcdaccd
This patch adds support for the Sitecom WL-341 v3 and other Sercomm IP1006RRv2 based boards for sysupgrade support and for the initial flash through pushbutton initiated recovery mode with the special partition table and fixes for the quirks and things required by the modified bootloader. There is a known bug, Wi-Fi is not working on my board probably because of the lack of RAM (the board only has 16MiB ram -- half of the normal amount for non rebadged versions, but there is an empty slot for another ram chip,) but I don't know for sure. The driver loads but hostapd fails to load so I think it's not related to the specific device except for the lack of RAM. Moreover, only 7 of the 11 onboard leds are confirmed working, it seems that one of the others is always on and the remaining ones are connected to the wireless card leds already recognized by OpenWrt [juhosg: reordered some parts in order to keep things sorted alphabetically] Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29910 3c298f89-4303-0410-b956-a3cf2f4a3e73
137 lines
3.7 KiB
Plaintext
137 lines
3.7 KiB
Plaintext
# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
|
|
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
|
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
|
|
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
|
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
|
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
|
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
|
# CONFIG_ATH79 is not set
|
|
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
CONFIG_CEVT_R4K=y
|
|
CONFIG_CEVT_R4K_LIB=y
|
|
CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2"
|
|
CONFIG_CMDLINE_BOOL=y
|
|
# CONFIG_CMDLINE_OVERRIDE is not set
|
|
CONFIG_CPU_HAS_PREFETCH=y
|
|
CONFIG_CPU_HAS_SYNC=y
|
|
CONFIG_CPU_LITTLE_ENDIAN=y
|
|
CONFIG_CPU_MIPS32=y
|
|
# CONFIG_CPU_MIPS32_R1 is not set
|
|
CONFIG_CPU_MIPS32_R2=y
|
|
CONFIG_CPU_MIPSR2=y
|
|
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
|
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
|
CONFIG_CSRC_R4K=y
|
|
CONFIG_CSRC_R4K_LIB=y
|
|
CONFIG_DECOMPRESS_LZMA=y
|
|
CONFIG_DMA_NONCOHERENT=y
|
|
# CONFIG_DWC_OTG is not set
|
|
CONFIG_EARLY_PRINTK=y
|
|
CONFIG_GENERIC_ATOMIC64=y
|
|
CONFIG_GENERIC_CLOCKEVENTS=y
|
|
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
CONFIG_GENERIC_CMOS_UPDATE=y
|
|
CONFIG_GENERIC_FIND_LAST_BIT=y
|
|
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|
CONFIG_GENERIC_GPIO=y
|
|
CONFIG_GENERIC_IRQ_SHOW=y
|
|
CONFIG_GPIOLIB=y
|
|
CONFIG_GPIO_SYSFS=y
|
|
CONFIG_HARDWARE_WATCHPOINTS=y
|
|
CONFIG_HAS_DMA=y
|
|
CONFIG_HAS_IOMEM=y
|
|
CONFIG_HAS_IOPORT=y
|
|
CONFIG_HAVE_ARCH_JUMP_LABEL=y
|
|
CONFIG_HAVE_ARCH_KGDB=y
|
|
CONFIG_HAVE_C_RECORDMCOUNT=y
|
|
CONFIG_HAVE_DMA_API_DEBUG=y
|
|
CONFIG_HAVE_DMA_ATTRS=y
|
|
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
|
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
|
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
|
CONFIG_HAVE_FUNCTION_TRACER=y
|
|
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
|
|
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
|
CONFIG_HAVE_GENERIC_HARDIRQS=y
|
|
CONFIG_HAVE_IDE=y
|
|
CONFIG_HAVE_IRQ_WORK=y
|
|
CONFIG_HAVE_OPROFILE=y
|
|
CONFIG_HAVE_PERF_EVENTS=y
|
|
CONFIG_HW_RANDOM=m
|
|
CONFIG_IMAGE_CMDLINE_HACK=y
|
|
CONFIG_INITRAMFS_SOURCE=""
|
|
CONFIG_IRQ_CPU=y
|
|
# CONFIG_LEDS_GPIO is not set
|
|
CONFIG_M25PXX_USE_FAST_READ=y
|
|
CONFIG_MACH_NO_WESTBRIDGE=y
|
|
# CONFIG_MII is not set
|
|
# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
|
|
CONFIG_MIPS=y
|
|
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
|
CONFIG_MIPS_MACHINE=y
|
|
CONFIG_MIPS_MT_DISABLED=y
|
|
CONFIG_MIPS_RALINK=y
|
|
CONFIG_MIPS_RAMIPS_NET=y
|
|
# CONFIG_MTD_CFI_INTELEXT is not set
|
|
CONFIG_MTD_CMDLINE_PARTS=y
|
|
CONFIG_MTD_M25P80=y
|
|
CONFIG_MTD_PHYSMAP=y
|
|
CONFIG_NEED_DMA_MAP_STATE=y
|
|
CONFIG_NEED_PER_CPU_KM=y
|
|
CONFIG_PAGEFLAGS_EXTENDED=y
|
|
CONFIG_PERF_USE_VMALLOC=y
|
|
CONFIG_PHYLIB=y
|
|
# CONFIG_PREEMPT_RCU is not set
|
|
# CONFIG_QUOTACTL is not set
|
|
CONFIG_RALINK_DEV_GPIO_BUTTONS=y
|
|
CONFIG_RALINK_DEV_GPIO_LEDS=y
|
|
# CONFIG_RALINK_RT288X is not set
|
|
CONFIG_RALINK_RT305X=y
|
|
CONFIG_RAMIPS_WDT=y
|
|
CONFIG_RT305X_MACH_ALL0256N=y
|
|
CONFIG_RT305X_MACH_ARGUS_ATP52B=y
|
|
CONFIG_RT305X_MACH_BC2=y
|
|
CONFIG_RT305X_MACH_DIR_300_REVB=y
|
|
CONFIG_RT305X_MACH_ESR_9753=y
|
|
CONFIG_RT305X_MACH_F5D8235_V2=y
|
|
CONFIG_RT305X_MACH_FONERA20N=y
|
|
CONFIG_RT305X_MACH_HW550_3G=y
|
|
CONFIG_RT305X_MACH_MOFI3500_3GN=y
|
|
CONFIG_RT305X_MACH_NBG_419N=y
|
|
CONFIG_RT305X_MACH_NW718=y
|
|
CONFIG_RT305X_MACH_OMNI_EMB=y
|
|
CONFIG_RT305X_MACH_PWH2004=y
|
|
CONFIG_RT305X_MACH_RT_G32_REVB=y
|
|
CONFIG_RT305X_MACH_V22RW_2X2=y
|
|
CONFIG_RT305X_MACH_W502U=y
|
|
CONFIG_RT305X_MACH_WCR150GN=y
|
|
CONFIG_RT305X_MACH_WHR_G300N=y
|
|
CONFIG_RT305X_MACH_WL341V3=y
|
|
CONFIG_RT305X_MACH_WL351=y
|
|
CONFIG_RT305X_MACH_WR512_3GN=y
|
|
# CONFIG_SCSI_DMA is not set
|
|
CONFIG_SERIAL_8250_NR_UARTS=4
|
|
CONFIG_SERIAL_8250_RT288X=y
|
|
# CONFIG_SLAB is not set
|
|
CONFIG_SLUB=y
|
|
CONFIG_SOC_RT305X=y
|
|
CONFIG_SPI=y
|
|
# CONFIG_SPI_BITBANG is not set
|
|
# CONFIG_SPI_GPIO is not set
|
|
CONFIG_SPI_MASTER=y
|
|
CONFIG_SPI_RAMIPS=y
|
|
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
|
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
|
|
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
|
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
|
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
|
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
|
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
# CONFIG_USB_ARCH_HAS_OHCI is not set
|
|
CONFIG_USB_SUPPORT=y
|
|
CONFIG_XZ_DEC=y
|
|
CONFIG_ZONE_DMA_FLAG=0
|