mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-31 00:35:32 +02:00
c6114b60db
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30454 3c298f89-4303-0410-b956-a3cf2f4a3e73
510 lines
13 KiB
Diff
510 lines
13 KiB
Diff
--- a/drivers/spi/Kconfig
|
|
+++ b/drivers/spi/Kconfig
|
|
@@ -117,6 +117,13 @@ config SPI_BUTTERFLY
|
|
inexpensive battery powered microcontroller evaluation board.
|
|
This same cable can be used to flash new firmware.
|
|
|
|
+config SPI_CNS3XXX
|
|
+ tristate "CNS3XXX SPI controller"
|
|
+ depends on ARCH_CNS3XXX && SPI_MASTER
|
|
+ select SPI_BITBANG
|
|
+ help
|
|
+ This enables using the CNS3XXX SPI controller in master mode.
|
|
+
|
|
config SPI_COLDFIRE_QSPI
|
|
tristate "Freescale Coldfire QSPI controller"
|
|
depends on (M520x || M523x || M5249 || M527x || M528x || M532x)
|
|
--- a/drivers/spi/Makefile
|
|
+++ b/drivers/spi/Makefile
|
|
@@ -18,6 +18,7 @@ obj-$(CONFIG_SPI_BFIN) += spi-bfin5xx.
|
|
obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o
|
|
obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o
|
|
obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o
|
|
+obj-$(CONFIG_SPI_CNS3XXX) += spi_cns3xxx.o
|
|
obj-$(CONFIG_SPI_COLDFIRE_QSPI) += spi-coldfire-qspi.o
|
|
obj-$(CONFIG_SPI_DAVINCI) += spi-davinci.o
|
|
obj-$(CONFIG_SPI_DESIGNWARE) += spi-dw.o
|
|
--- /dev/null
|
|
+++ b/drivers/spi/spi_cns3xxx.c
|
|
@@ -0,0 +1,449 @@
|
|
+/*******************************************************************************
|
|
+ *
|
|
+ * CNS3XXX SPI controller driver (master mode only)
|
|
+ *
|
|
+ * Copyright (c) 2008 Cavium Networks
|
|
+ * Copyright 2011 Gateworks Corporation
|
|
+ * Chris Lang <clang@gateworks.com>
|
|
+ *
|
|
+ * This file is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License, Version 2, as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ * This file is distributed in the hope that it will be useful,
|
|
+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
|
|
+ * NONINFRINGEMENT. See the GNU General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this file; if not, write to the Free Software
|
|
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
|
|
+ * visit http://www.gnu.org/licenses/.
|
|
+ *
|
|
+ * This file may also be available under a different license from Cavium.
|
|
+ * Contact Cavium Networks for more information
|
|
+ *
|
|
+ ******************************************************************************/
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/spinlock.h>
|
|
+#include <linux/workqueue.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/errno.h>
|
|
+#include <linux/err.h>
|
|
+#include <linux/clk.h>
|
|
+#include <linux/platform_device.h>
|
|
+
|
|
+#include <linux/spi/spi.h>
|
|
+#include <linux/spi/spi_bitbang.h>
|
|
+#include <linux/mtd/partitions.h>
|
|
+#include <linux/dma-mapping.h>
|
|
+#include <linux/slab.h>
|
|
+
|
|
+#include <asm/io.h>
|
|
+#include <asm/memory.h>
|
|
+#include <asm/dma.h>
|
|
+#include <asm/delay.h>
|
|
+#include <mach/cns3xxx.h>
|
|
+#include <linux/module.h>
|
|
+#include <mach/pm.h>
|
|
+
|
|
+/*
|
|
+ * define access macros
|
|
+ */
|
|
+#define SPI_MEM_MAP_VALUE(reg_offset) (*((u32 volatile *)(CNS3XXX_SSP_BASE_VIRT + reg_offset)))
|
|
+
|
|
+#define SPI_CONFIGURATION_REG SPI_MEM_MAP_VALUE(0x40)
|
|
+#define SPI_SERVICE_STATUS_REG SPI_MEM_MAP_VALUE(0x44)
|
|
+#define SPI_BIT_RATE_CONTROL_REG SPI_MEM_MAP_VALUE(0x48)
|
|
+#define SPI_TRANSMIT_CONTROL_REG SPI_MEM_MAP_VALUE(0x4C)
|
|
+#define SPI_TRANSMIT_BUFFER_REG SPI_MEM_MAP_VALUE(0x50)
|
|
+#define SPI_RECEIVE_CONTROL_REG SPI_MEM_MAP_VALUE(0x54)
|
|
+#define SPI_RECEIVE_BUFFER_REG SPI_MEM_MAP_VALUE(0x58)
|
|
+#define SPI_FIFO_TRANSMIT_CONFIG_REG SPI_MEM_MAP_VALUE(0x5C)
|
|
+#define SPI_FIFO_TRANSMIT_CONTROL_REG SPI_MEM_MAP_VALUE(0x60)
|
|
+#define SPI_FIFO_RECEIVE_CONFIG_REG SPI_MEM_MAP_VALUE(0x64)
|
|
+#define SPI_INTERRUPT_STATUS_REG SPI_MEM_MAP_VALUE(0x68)
|
|
+#define SPI_INTERRUPT_ENABLE_REG SPI_MEM_MAP_VALUE(0x6C)
|
|
+
|
|
+#define SPI_TRANSMIT_BUFFER_REG_ADDR (CNS3XXX_SSP_BASE +0x50)
|
|
+#define SPI_RECEIVE_BUFFER_REG_ADDR (CNS3XXX_SSP_BASE +0x58)
|
|
+
|
|
+/* Structure for SPI controller of CNS3XXX SOCs */
|
|
+struct cns3xxx_spi {
|
|
+ /* bitbang has to be first */
|
|
+ struct spi_bitbang bitbang;
|
|
+ struct completion done;
|
|
+ wait_queue_head_t wait;
|
|
+
|
|
+ int len;
|
|
+ int count;
|
|
+ int last_in_message_list;
|
|
+
|
|
+ /* data buffers */
|
|
+ const unsigned char *tx;
|
|
+ unsigned char *rx;
|
|
+
|
|
+ struct spi_master *master;
|
|
+ struct platform_device *pdev;
|
|
+ struct device *dev;
|
|
+};
|
|
+
|
|
+static inline u8 cns3xxx_spi_bus_idle(void)
|
|
+{
|
|
+ return ((SPI_SERVICE_STATUS_REG & 0x1) ? 0 : 1);
|
|
+}
|
|
+
|
|
+static inline u8 cns3xxx_spi_tx_buffer_empty(void)
|
|
+{
|
|
+ return ((SPI_INTERRUPT_STATUS_REG & (0x1 << 3)) ? 1 : 0);
|
|
+}
|
|
+
|
|
+static inline u8 cns3xxx_spi_rx_buffer_full(void)
|
|
+{
|
|
+ return ((SPI_INTERRUPT_STATUS_REG & (0x1 << 2)) ? 1 : 0);
|
|
+}
|
|
+
|
|
+u8 cns3xxx_spi_tx_rx(u8 tx_channel, u8 tx_eof, u32 tx_data,
|
|
+ u32 * rx_data)
|
|
+{
|
|
+ u8 rx_channel;
|
|
+ u8 rx_eof;
|
|
+
|
|
+ while (!cns3xxx_spi_bus_idle()) ; // do nothing
|
|
+
|
|
+ while (!cns3xxx_spi_tx_buffer_empty()) ; // do nothing
|
|
+
|
|
+ SPI_TRANSMIT_CONTROL_REG &= ~(0x7);
|
|
+ SPI_TRANSMIT_CONTROL_REG |= (tx_channel & 0x3) | ((tx_eof & 0x1) << 2);
|
|
+
|
|
+ SPI_TRANSMIT_BUFFER_REG = tx_data;
|
|
+
|
|
+ while (!cns3xxx_spi_rx_buffer_full()) ; // do nothing
|
|
+
|
|
+ rx_channel = SPI_RECEIVE_CONTROL_REG & 0x3;
|
|
+ rx_eof = (SPI_RECEIVE_CONTROL_REG & (0x1 << 2)) ? 1 : 0;
|
|
+
|
|
+ *rx_data = SPI_RECEIVE_BUFFER_REG;
|
|
+
|
|
+ if ((tx_channel != rx_channel) || (tx_eof != rx_eof)) {
|
|
+ return 0;
|
|
+ } else {
|
|
+ return 1;
|
|
+ }
|
|
+}
|
|
+
|
|
+u8 cns3xxx_spi_tx(u8 tx_channel, u8 tx_eof, u32 tx_data)
|
|
+{
|
|
+
|
|
+ while (!cns3xxx_spi_bus_idle()) ; // do nothing
|
|
+
|
|
+ while (!cns3xxx_spi_tx_buffer_empty()) ; // do nothing
|
|
+
|
|
+ SPI_TRANSMIT_CONTROL_REG &= ~(0x7);
|
|
+ SPI_TRANSMIT_CONTROL_REG |= (tx_channel & 0x3) | ((tx_eof & 0x1) << 2);
|
|
+
|
|
+ SPI_TRANSMIT_BUFFER_REG = tx_data;
|
|
+
|
|
+ return 1;
|
|
+}
|
|
+
|
|
+static inline struct cns3xxx_spi *to_hw(struct spi_device *sdev)
|
|
+{
|
|
+ return spi_master_get_devdata(sdev->master);
|
|
+}
|
|
+
|
|
+static int cns3xxx_spi_setup_transfer(struct spi_device *spi,
|
|
+ struct spi_transfer *t)
|
|
+{
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void cns3xxx_spi_chipselect(struct spi_device *spi, int value)
|
|
+{
|
|
+ unsigned int spi_config;
|
|
+
|
|
+ switch (value) {
|
|
+ case BITBANG_CS_INACTIVE:
|
|
+ break;
|
|
+
|
|
+ case BITBANG_CS_ACTIVE:
|
|
+ spi_config = SPI_CONFIGURATION_REG;
|
|
+
|
|
+ if (spi->mode & SPI_CPHA)
|
|
+ spi_config |= (0x1 << 13);
|
|
+ else
|
|
+ spi_config &= ~(0x1 << 13);
|
|
+
|
|
+ if (spi->mode & SPI_CPOL)
|
|
+ spi_config |= (0x1 << 14);
|
|
+ else
|
|
+ spi_config &= ~(0x1 << 14);
|
|
+
|
|
+ /* write new configration */
|
|
+ SPI_CONFIGURATION_REG = spi_config;
|
|
+
|
|
+ SPI_TRANSMIT_CONTROL_REG &= ~(0x7);
|
|
+ SPI_TRANSMIT_CONTROL_REG |= (spi->chip_select & 0x3);
|
|
+
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+static int cns3xxx_spi_setup(struct spi_device *spi)
|
|
+{
|
|
+ if (!spi->bits_per_word)
|
|
+ spi->bits_per_word = 8;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int cns3xxx_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
|
|
+{
|
|
+ struct cns3xxx_spi *hw = to_hw(spi);
|
|
+
|
|
+ dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", t->tx_buf, t->rx_buf,
|
|
+ t->len);
|
|
+
|
|
+ hw->tx = t->tx_buf;
|
|
+ hw->rx = t->rx_buf;
|
|
+ hw->len = t->len;
|
|
+ hw->count = 0;
|
|
+ hw->last_in_message_list = t->last_in_message_list;
|
|
+
|
|
+ init_completion(&hw->done);
|
|
+
|
|
+ if (hw->tx) {
|
|
+ int i;
|
|
+ u32 rx_data;
|
|
+ for (i = 0; i < (hw->len - 1); i++) {
|
|
+ dev_dbg(&spi->dev,
|
|
+ "[SPI_CNS3XXX_DEBUG] hw->tx[%02d]: 0x%02x\n", i,
|
|
+ hw->tx[i]);
|
|
+ cns3xxx_spi_tx_rx(spi->chip_select, 0, hw->tx[i],
|
|
+ &rx_data);
|
|
+ if (hw->rx) {
|
|
+ hw->rx[i] = rx_data;
|
|
+ dev_dbg(&spi->dev,
|
|
+ "[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n",
|
|
+ i, hw->rx[i]);
|
|
+ }
|
|
+ }
|
|
+
|
|
+ if (t->last_in_message_list) {
|
|
+ cns3xxx_spi_tx_rx(spi->chip_select, 1, hw->tx[i],
|
|
+ &rx_data);
|
|
+ if (hw->rx) {
|
|
+ hw->rx[i] = rx_data;
|
|
+ dev_dbg(&spi->dev,
|
|
+ "[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n",
|
|
+ i, hw->rx[i]);
|
|
+ }
|
|
+ } else {
|
|
+ cns3xxx_spi_tx_rx(spi->chip_select, 0, hw->tx[i],
|
|
+ &rx_data);
|
|
+ }
|
|
+ goto done;
|
|
+ }
|
|
+
|
|
+ if (hw->rx) {
|
|
+ int i;
|
|
+ u32 rx_data;
|
|
+ for (i = 0; i < (hw->len - 1); i++) {
|
|
+ cns3xxx_spi_tx_rx(spi->chip_select, 0, 0xff, &rx_data);
|
|
+ hw->rx[i] = rx_data;
|
|
+ dev_dbg(&spi->dev,
|
|
+ "[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n", i,
|
|
+ hw->rx[i]);
|
|
+ }
|
|
+
|
|
+ if (t->last_in_message_list) {
|
|
+ cns3xxx_spi_tx_rx(spi->chip_select, 1, 0xff, &rx_data);
|
|
+ } else {
|
|
+ cns3xxx_spi_tx_rx(spi->chip_select, 0, 0xff, &rx_data);
|
|
+ }
|
|
+ hw->rx[i] = rx_data;
|
|
+ dev_dbg(&spi->dev, "[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n",
|
|
+ i, hw->rx[i]);
|
|
+ }
|
|
+done:
|
|
+ return hw->len;
|
|
+}
|
|
+
|
|
+static void __init cns3xxx_spi_initial(void)
|
|
+{
|
|
+ u32 __iomem *gpiob = __io(CNS3XXX_MISC_BASE_VIRT + 0x0018);
|
|
+ u32 gpiob_pins = __raw_readl(gpiob);
|
|
+
|
|
+ /* MMC/SD pins share with GPIOA */
|
|
+ gpiob_pins |= 0xf80;
|
|
+ __raw_writel(gpiob_pins, gpiob);
|
|
+
|
|
+ /* share pin config. */
|
|
+ //PM_PLL_HM_PD_CTRL_REG &= ~(0x1 << 5);
|
|
+ //HAL_MISC_ENABLE_SPI_PINS();
|
|
+ cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SPI_PCM_I2C));
|
|
+ cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SPI_PCM_I2C));
|
|
+
|
|
+ SPI_CONFIGURATION_REG = (((0x0 & 0x3) << 0) | /* 8bits shift length */
|
|
+ (0x0 << 9) | /* SPI mode */
|
|
+ (0x0 << 10) | /* disable FIFO */
|
|
+ (0x1 << 11) | /* SPI master mode */
|
|
+ (0x0 << 12) | /* disable SPI loopback mode */
|
|
+ (0x1 << 13) | /* clock phase */
|
|
+ (0x1 << 14) | /* clock polarity */
|
|
+ (0x0 << 24) | /* disable - SPI data swap */
|
|
+ (0x1 << 29) | /* enable - 2IO Read mode */
|
|
+ (0x0 << 30) | /* disable - SPI high speed read for system boot up */
|
|
+ (0x0 << 31)); /* disable - SPI */
|
|
+
|
|
+ /* Set SPI bit rate PCLK/2 */
|
|
+ SPI_BIT_RATE_CONTROL_REG = 0x1;
|
|
+
|
|
+ /* Set SPI Tx channel 0 */
|
|
+ SPI_TRANSMIT_CONTROL_REG = 0x0;
|
|
+
|
|
+ /* Set Tx FIFO Threshold, Tx FIFO has 2 words */
|
|
+ SPI_FIFO_TRANSMIT_CONFIG_REG &= ~(0x03 << 4);
|
|
+ SPI_FIFO_TRANSMIT_CONFIG_REG |= ((0x0 & 0x03) << 4);
|
|
+
|
|
+ /* Set Rx FIFO Threshold, Rx FIFO has 2 words */
|
|
+ SPI_FIFO_RECEIVE_CONFIG_REG &= ~(0x03 << 4);
|
|
+ SPI_FIFO_RECEIVE_CONFIG_REG |= ((0x0 & 0x03) << 4);
|
|
+
|
|
+ /* Disable all interrupt */
|
|
+ SPI_INTERRUPT_ENABLE_REG = 0x0;
|
|
+
|
|
+ /* Clear spurious interrupt sources */
|
|
+ SPI_INTERRUPT_STATUS_REG = (0x0F << 4);
|
|
+
|
|
+ /* Enable SPI */
|
|
+ SPI_CONFIGURATION_REG |= (0x1 << 31);
|
|
+
|
|
+ return;
|
|
+}
|
|
+
|
|
+static int __init cns3xxx_spi_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct spi_master *master;
|
|
+ struct cns3xxx_spi *hw;
|
|
+ int err = 0;
|
|
+
|
|
+ printk("%s: setup CNS3XXX SPI Controller\n", __FUNCTION__);
|
|
+
|
|
+ /* Allocate master with space for cns3xxx_spi */
|
|
+ master = spi_alloc_master(&pdev->dev, sizeof(struct cns3xxx_spi));
|
|
+ if (master == NULL) {
|
|
+ dev_err(&pdev->dev, "No memory for spi_master\n");
|
|
+ err = -ENOMEM;
|
|
+ goto err_nomem;
|
|
+ }
|
|
+
|
|
+ hw = spi_master_get_devdata(master);
|
|
+ memset(hw, 0, sizeof(struct cns3xxx_spi));
|
|
+
|
|
+ hw->master = spi_master_get(master);
|
|
+ hw->dev = &pdev->dev;
|
|
+
|
|
+ platform_set_drvdata(pdev, hw);
|
|
+ init_completion(&hw->done);
|
|
+
|
|
+ /* setup the master state. */
|
|
+
|
|
+ master->num_chipselect = 4;
|
|
+ master->bus_num = 1;
|
|
+
|
|
+ /* setup the state for the bitbang driver */
|
|
+
|
|
+ hw->bitbang.master = hw->master;
|
|
+ hw->bitbang.setup_transfer = cns3xxx_spi_setup_transfer;
|
|
+ hw->bitbang.chipselect = cns3xxx_spi_chipselect;
|
|
+ hw->bitbang.txrx_bufs = cns3xxx_spi_txrx;
|
|
+ hw->bitbang.master->setup = cns3xxx_spi_setup;
|
|
+
|
|
+ dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang);
|
|
+
|
|
+ /* SPI controller initializations */
|
|
+ cns3xxx_spi_initial();
|
|
+
|
|
+ /* register SPI controller */
|
|
+
|
|
+ err = spi_bitbang_start(&hw->bitbang);
|
|
+ if (err) {
|
|
+ dev_err(&pdev->dev, "Failed to register SPI master\n");
|
|
+ goto err_register;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+
|
|
+err_register:
|
|
+ spi_master_put(hw->master);;
|
|
+
|
|
+err_nomem:
|
|
+ return err;
|
|
+}
|
|
+
|
|
+static int __devexit cns3xxx_spi_remove(struct platform_device *dev)
|
|
+{
|
|
+ struct cns3xxx_spi *hw = platform_get_drvdata(dev);
|
|
+
|
|
+ platform_set_drvdata(dev, NULL);
|
|
+
|
|
+ spi_unregister_master(hw->master);
|
|
+
|
|
+ spi_master_put(hw->master);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_PM
|
|
+
|
|
+static int cns3xxx_spi_suspend(struct platform_device *pdev, pm_message_t msg)
|
|
+{
|
|
+ struct cns3xxx_spi *hw = platform_get_drvdata(pdev);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int cns3xxx_spi_resume(struct platform_device *pdev)
|
|
+{
|
|
+ struct cns3xxx_spi *hw = platform_get_drvdata(pdev);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+#else
|
|
+#define cns3xxx_spi_suspend NULL
|
|
+#define cns3xxx_spi_resume NULL
|
|
+#endif
|
|
+
|
|
+static struct platform_driver cns3xxx_spi_driver = {
|
|
+ .probe = cns3xxx_spi_probe,
|
|
+ .remove = __devexit_p(cns3xxx_spi_remove),
|
|
+ .suspend = cns3xxx_spi_suspend,
|
|
+ .resume = cns3xxx_spi_resume,
|
|
+ .driver = {
|
|
+ .name = "cns3xxx_spi",
|
|
+ .owner = THIS_MODULE,
|
|
+ },
|
|
+};
|
|
+
|
|
+static int __init cns3xxx_spi_init(void)
|
|
+{
|
|
+ return platform_driver_register(&cns3xxx_spi_driver);
|
|
+}
|
|
+
|
|
+static void __exit cns3xxx_spi_exit(void)
|
|
+{
|
|
+ platform_driver_unregister(&cns3xxx_spi_driver);
|
|
+}
|
|
+
|
|
+module_init(cns3xxx_spi_init);
|
|
+module_exit(cns3xxx_spi_exit);
|
|
+
|
|
+MODULE_AUTHOR("Cavium Networks");
|
|
+MODULE_DESCRIPTION("CNS3XXX SPI Controller Driver");
|
|
+MODULE_LICENSE("GPL");
|
|
+MODULE_ALIAS("platform:cns3xxx_spi");
|
|
+
|
|
+EXPORT_SYMBOL_GPL(cns3xxx_spi_tx_rx);
|
|
--- a/include/linux/spi/spi.h
|
|
+++ b/include/linux/spi/spi.h
|
|
@@ -446,6 +446,13 @@ struct spi_transfer {
|
|
u32 speed_hz;
|
|
|
|
struct list_head transfer_list;
|
|
+
|
|
+#ifdef CONFIG_ARCH_CNS3XXX
|
|
+ unsigned last_in_message_list;
|
|
+#ifdef CONFIG_SPI_CNS3XXX_2IOREAD
|
|
+ u8 dio_read;
|
|
+#endif
|
|
+#endif
|
|
};
|
|
|
|
/**
|
|
--- a/drivers/spi/spi-bitbang.c
|
|
+++ b/drivers/spi/spi-bitbang.c
|
|
@@ -329,6 +329,12 @@ static void bitbang_work(struct work_str
|
|
*/
|
|
if (!m->is_dma_mapped)
|
|
t->rx_dma = t->tx_dma = 0;
|
|
+
|
|
+ if (t->transfer_list.next == &m->transfers)
|
|
+ t->last_in_message_list = 1;
|
|
+ else
|
|
+ t->last_in_message_list = 0;
|
|
+
|
|
status = bitbang->txrx_bufs(spi, t);
|
|
}
|
|
if (status > 0)
|