1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-28 19:53:09 +02:00
openwrt-xburst/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c
juhosg 5ac400c7f1 ar71xx: pass eeprom and mac address location to the ar913x_add_device_wmac function
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18950 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-27 20:59:50 +00:00

160 lines
3.7 KiB
C

/*
* Planex MZK-W300NH board support
*
* Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include "machtype.h"
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-ar913x-wmac.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#define MZK_W300NH_GPIO_LED_STATUS 1
#define MZK_W300NH_GPIO_LED_WPS 3
#define MZK_W300NH_GPIO_LED_WLAN 6
#define MZK_W300NH_GPIO_LED_AP 15
#define MZK_W300NH_GPIO_LED_ROUTER 16
#define MZK_W300NH_GPIO_BTN_APROUTER 5
#define MZK_W300NH_GPIO_BTN_WPS 12
#define MZK_W300NH_GPIO_BTN_RESET 21
#define MZK_W04NU_BUTTONS_POLL_INTERVAL 20
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition mzk_w300nh_partitions[] = {
{
.name = "u-boot",
.offset = 0,
.size = 0x040000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "u-boot-env",
.offset = 0x040000,
.size = 0x010000,
} , {
.name = "kernel",
.offset = 0x050000,
.size = 0x160000,
} , {
.name = "rootfs",
.offset = 0x1b0000,
.size = 0x610000,
} , {
.name = "config",
.offset = 0x7c0000,
.size = 0x020000,
} , {
.name = "art",
.offset = 0x7e0000,
.size = 0x020000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "firmware",
.offset = 0x050000,
.size = 0x770000,
}
};
#endif /* CONFIG_MTD_PARTITIONS */
static struct flash_platform_data mzk_w300nh_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
.parts = mzk_w300nh_partitions,
.nr_parts = ARRAY_SIZE(mzk_w300nh_partitions),
#endif
};
static struct gpio_led mzk_w300nh_leds_gpio[] __initdata = {
{
.name = "mzk-w300nh:green:status",
.gpio = MZK_W300NH_GPIO_LED_STATUS,
.active_low = 1,
}, {
.name = "mzk-w300nh:blue:wps",
.gpio = MZK_W300NH_GPIO_LED_WPS,
.active_low = 1,
}, {
.name = "mzk-w300nh:green:wlan",
.gpio = MZK_W300NH_GPIO_LED_WLAN,
.active_low = 1,
}, {
.name = "mzk-w300nh:green:ap",
.gpio = MZK_W300NH_GPIO_LED_AP,
.active_low = 1,
}, {
.name = "mzk-w300nh:green:router",
.gpio = MZK_W300NH_GPIO_LED_ROUTER,
.active_low = 1,
}
};
static struct gpio_button mzk_w300nh_gpio_buttons[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = BTN_0,
.threshold = 5,
.gpio = MZK_W300NH_GPIO_BTN_RESET,
.active_low = 1,
}, {
.desc = "wps",
.type = EV_KEY,
.code = BTN_1,
.threshold = 5,
.gpio = MZK_W300NH_GPIO_BTN_WPS,
.active_low = 1,
}, {
.desc = "aprouter",
.type = EV_KEY,
.code = BTN_2,
.threshold = 5,
.gpio = MZK_W300NH_GPIO_BTN_APROUTER,
.active_low = 0,
}
};
static void __init mzk_w300nh_setup(void)
{
u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
ar71xx_set_mac_base(eeprom);
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.phy_mask = 0xf;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_data.has_ar8216 = 1;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.phy_mask = 0x10;
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
ar71xx_add_device_m25p80(&mzk_w300nh_flash_data);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio),
mzk_w300nh_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, MZK_W04NU_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(mzk_w300nh_gpio_buttons),
mzk_w300nh_gpio_buttons);
ar913x_add_device_wmac(eeprom, NULL);
}
MIPS_MACHINE(AR71XX_MACH_MZK_W300NH, "Planex MZK-W300NH", mzk_w300nh_setup);