mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-05 17:01:53 +02:00
513c273d00
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6564 3c298f89-4303-0410-b956-a3cf2f4a3e73
475 lines
11 KiB
C
475 lines
11 KiB
C
/*
|
|
* Broadcom BCM5325E/536x switch configuration module
|
|
*
|
|
* Copyright (C) 2005 Felix Fietkau <nbd@nbd.name>
|
|
* Based on 'robocfg' by Oleg I. Vdovikin
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
|
|
* 02110-1301, USA.
|
|
*/
|
|
|
|
#include <linux/autoconf.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/if.h>
|
|
#include <linux/if_arp.h>
|
|
#include <linux/sockios.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mii.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
#include "switch-core.h"
|
|
#include "etc53xx.h"
|
|
|
|
#define DRIVER_NAME "bcm53xx"
|
|
#define DRIVER_VERSION "0.01"
|
|
|
|
#define ROBO_PHY_ADDR 0x1E /* robo switch phy address */
|
|
|
|
/* MII registers */
|
|
#define REG_MII_PAGE 0x10 /* MII Page register */
|
|
#define REG_MII_ADDR 0x11 /* MII Address register */
|
|
#define REG_MII_DATA0 0x18 /* MII Data register 0 */
|
|
|
|
#define REG_MII_PAGE_ENABLE 1
|
|
#define REG_MII_ADDR_WRITE 1
|
|
#define REG_MII_ADDR_READ 2
|
|
|
|
/* Private et.o ioctls */
|
|
#define SIOCGETCPHYRD (SIOCDEVPRIVATE + 9)
|
|
#define SIOCSETCPHYWR (SIOCDEVPRIVATE + 10)
|
|
|
|
static char *device;
|
|
static int use_et = 0;
|
|
static int is_5350 = 0;
|
|
static struct ifreq ifr;
|
|
static struct net_device *dev;
|
|
static unsigned char port[6] = { 0, 1, 2, 3, 4, 8 };
|
|
|
|
static int do_ioctl(int cmd, void *buf)
|
|
{
|
|
mm_segment_t old_fs = get_fs();
|
|
int ret;
|
|
|
|
if (buf != NULL)
|
|
ifr.ifr_data = (caddr_t) buf;
|
|
|
|
set_fs(KERNEL_DS);
|
|
ret = dev->do_ioctl(dev, &ifr, cmd);
|
|
set_fs(old_fs);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static u16 mdio_read(__u16 phy_id, __u8 reg)
|
|
{
|
|
if (use_et) {
|
|
int args[2] = { reg };
|
|
|
|
if (phy_id != ROBO_PHY_ADDR) {
|
|
printk(
|
|
"Access to real 'phy' registers unavaliable.\n"
|
|
"Upgrade kernel driver.\n");
|
|
|
|
return 0xffff;
|
|
}
|
|
|
|
|
|
if (do_ioctl(SIOCGETCPHYRD, &args) < 0) {
|
|
printk("[%s:%d] SIOCGETCPHYRD failed!\n", __FILE__, __LINE__);
|
|
return 0xffff;
|
|
}
|
|
|
|
return args[1];
|
|
} else {
|
|
struct mii_ioctl_data *mii = (struct mii_ioctl_data *) &ifr.ifr_data;
|
|
mii->phy_id = phy_id;
|
|
mii->reg_num = reg;
|
|
|
|
if (do_ioctl(SIOCGMIIREG, NULL) < 0) {
|
|
printk("[%s:%d] SIOCGMIIREG failed!\n", __FILE__, __LINE__);
|
|
|
|
return 0xffff;
|
|
}
|
|
|
|
return mii->val_out;
|
|
}
|
|
}
|
|
|
|
static void mdio_write(__u16 phy_id, __u8 reg, __u16 val)
|
|
{
|
|
if (use_et) {
|
|
int args[2] = { reg, val };
|
|
|
|
if (phy_id != ROBO_PHY_ADDR) {
|
|
printk(
|
|
"Access to real 'phy' registers unavaliable.\n"
|
|
"Upgrade kernel driver.\n");
|
|
|
|
return;
|
|
}
|
|
|
|
if (do_ioctl(SIOCSETCPHYWR, args) < 0) {
|
|
printk("[%s:%d] SIOCGETCPHYWR failed!\n", __FILE__, __LINE__);
|
|
return;
|
|
}
|
|
} else {
|
|
struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&ifr.ifr_data;
|
|
|
|
mii->phy_id = phy_id;
|
|
mii->reg_num = reg;
|
|
mii->val_in = val;
|
|
|
|
if (do_ioctl(SIOCSMIIREG, NULL) < 0) {
|
|
printk("[%s:%d] SIOCSMIIREG failed!\n", __FILE__, __LINE__);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int robo_reg(__u8 page, __u8 reg, __u8 op)
|
|
{
|
|
int i = 3;
|
|
|
|
/* set page number */
|
|
mdio_write(ROBO_PHY_ADDR, REG_MII_PAGE,
|
|
(page << 8) | REG_MII_PAGE_ENABLE);
|
|
|
|
/* set register address */
|
|
mdio_write(ROBO_PHY_ADDR, REG_MII_ADDR,
|
|
(reg << 8) | op);
|
|
|
|
/* check if operation completed */
|
|
while (i--) {
|
|
if ((mdio_read(ROBO_PHY_ADDR, REG_MII_ADDR) & 3) == 0)
|
|
return 0;
|
|
}
|
|
|
|
printk("[%s:%d] timeout in robo_reg!\n", __FILE__, __LINE__);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
static void robo_read(__u8 page, __u8 reg, __u16 *val, int count)
|
|
{
|
|
int i;
|
|
|
|
robo_reg(page, reg, REG_MII_ADDR_READ);
|
|
|
|
for (i = 0; i < count; i++)
|
|
val[i] = mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0 + i);
|
|
}
|
|
*/
|
|
|
|
static __u16 robo_read16(__u8 page, __u8 reg)
|
|
{
|
|
robo_reg(page, reg, REG_MII_ADDR_READ);
|
|
|
|
return mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0);
|
|
}
|
|
|
|
static __u32 robo_read32(__u8 page, __u8 reg)
|
|
{
|
|
robo_reg(page, reg, REG_MII_ADDR_READ);
|
|
|
|
return mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0) +
|
|
(mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0 + 1) << 16);
|
|
}
|
|
|
|
static void robo_write16(__u8 page, __u8 reg, __u16 val16)
|
|
{
|
|
/* write data */
|
|
mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0, val16);
|
|
|
|
robo_reg(page, reg, REG_MII_ADDR_WRITE);
|
|
}
|
|
|
|
static void robo_write32(__u8 page, __u8 reg, __u32 val32)
|
|
{
|
|
/* write data */
|
|
mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0, val32 & 65535);
|
|
mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0 + 1, val32 >> 16);
|
|
|
|
robo_reg(page, reg, REG_MII_ADDR_WRITE);
|
|
}
|
|
|
|
/* checks that attached switch is 5325E/5350 */
|
|
static int robo_vlan5350(void)
|
|
{
|
|
/* set vlan access id to 15 and read it back */
|
|
__u16 val16 = 15;
|
|
robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16);
|
|
|
|
/* 5365 will refuse this as it does not have this reg */
|
|
return (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350) == val16);
|
|
}
|
|
|
|
|
|
|
|
static int robo_probe(char *devname)
|
|
{
|
|
__u32 phyid;
|
|
|
|
printk("Probing device %s: ", devname);
|
|
strcpy(ifr.ifr_name, devname);
|
|
|
|
if ((dev = dev_get_by_name(devname)) == NULL) {
|
|
printk("No such device\n");
|
|
return 1;
|
|
}
|
|
|
|
/* try access using MII ioctls - get phy address */
|
|
if (do_ioctl(SIOCGMIIPHY, NULL) < 0) {
|
|
use_et = 1;
|
|
} else {
|
|
/* got phy address check for robo address */
|
|
struct mii_ioctl_data *mii = (struct mii_ioctl_data *) &ifr.ifr_data;
|
|
if (mii->phy_id != ROBO_PHY_ADDR) {
|
|
printk("Invalid phy address (%d)\n", mii->phy_id);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
phyid = mdio_read(ROBO_PHY_ADDR, 0x2) |
|
|
(mdio_read(ROBO_PHY_ADDR, 0x3) << 16);
|
|
|
|
if (phyid == 0xffffffff || phyid == 0x55210022) {
|
|
printk("No Robo switch in managed mode found\n");
|
|
return 1;
|
|
}
|
|
|
|
is_5350 = robo_vlan5350();
|
|
|
|
printk("found!\n");
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int handle_vlan_port_read(void *driver, char *buf, int nr)
|
|
{
|
|
__u16 val16;
|
|
int len = 0;
|
|
int j;
|
|
|
|
val16 = (nr) /* vlan */ | (0 << 12) /* read */ | (1 << 13) /* enable */;
|
|
|
|
if (is_5350) {
|
|
u32 val32;
|
|
robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16);
|
|
/* actual read */
|
|
val32 = robo_read32(ROBO_VLAN_PAGE, ROBO_VLAN_READ);
|
|
if ((val32 & (1 << 20)) /* valid */) {
|
|
for (j = 0; j < 6; j++) {
|
|
if (val32 & (1 << j)) {
|
|
len += sprintf(buf + len, "%d", j);
|
|
if (val32 & (1 << (j + 6))) {
|
|
if (j == 5) buf[len++] = 'u';
|
|
} else {
|
|
buf[len++] = 't';
|
|
if (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1)) == nr)
|
|
buf[len++] = '*';
|
|
}
|
|
buf[len++] = '\t';
|
|
}
|
|
}
|
|
len += sprintf(buf + len, "\n");
|
|
}
|
|
} else {
|
|
robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
|
|
/* actual read */
|
|
val16 = robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_READ);
|
|
if ((val16 & (1 << 14)) /* valid */) {
|
|
for (j = 0; j < 6; j++) {
|
|
if (val16 & (1 << j)) {
|
|
len += sprintf(buf + len, "%d", j);
|
|
if (val16 & (1 << (j + 7))) {
|
|
if (j == 5) buf[len++] = 'u';
|
|
} else {
|
|
buf[len++] = 't';
|
|
if (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1)) == nr)
|
|
buf[len++] = '*';
|
|
}
|
|
buf[len++] = '\t';
|
|
}
|
|
}
|
|
len += sprintf(buf + len, "\n");
|
|
}
|
|
}
|
|
|
|
buf[len] = '\0';
|
|
|
|
return len;
|
|
}
|
|
|
|
static int handle_vlan_port_write(void *driver, char *buf, int nr)
|
|
{
|
|
switch_driver *d = (switch_driver *) driver;
|
|
switch_vlan_config *c = switch_parse_vlan(d, buf);
|
|
int j;
|
|
__u16 val16;
|
|
|
|
if (c == NULL)
|
|
return -EINVAL;
|
|
|
|
for (j = 0; j < d->ports; j++) {
|
|
if ((c->untag | c->pvid) & (1 << j))
|
|
/* change default vlan tag */
|
|
robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1), nr);
|
|
}
|
|
|
|
/* write config now */
|
|
val16 = (nr) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */;
|
|
if (is_5350) {
|
|
robo_write32(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5350,
|
|
(1 << 20) /* valid */ | (c->untag << 6) | c->port);
|
|
robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16);
|
|
} else {
|
|
robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE,
|
|
(1 << 14) /* valid */ | (c->untag << 7) | c->port);
|
|
robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define set_switch(state) \
|
|
robo_write16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE, (robo_read16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE) & ~2) | (state ? 2 : 0));
|
|
|
|
static int handle_enable_read(void *driver, char *buf, int nr)
|
|
{
|
|
return sprintf(buf, "%d\n", (((robo_read16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE) & 2) == 2) ? 1 : 0));
|
|
}
|
|
|
|
static int handle_enable_write(void *driver, char *buf, int nr)
|
|
{
|
|
set_switch(buf[0] == '1');
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int handle_enable_vlan_read(void *driver, char *buf, int nr)
|
|
{
|
|
return sprintf(buf, "%d\n", (((robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0) & (1 << 7)) == (1 << 7)) ? 1 : 0));
|
|
}
|
|
|
|
static int handle_enable_vlan_write(void *driver, char *buf, int nr)
|
|
{
|
|
int disable = ((buf[0] != '1') ? 1 : 0);
|
|
|
|
robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0, disable ? 0 :
|
|
(1 << 7) /* 802.1Q VLAN */ | (3 << 5) /* mac check and hash */);
|
|
robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL1, disable ? 0 :
|
|
(1 << 1) | (1 << 2) | (1 << 3) /* RSV multicast */);
|
|
robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL4, disable ? 0 :
|
|
(1 << 6) /* drop invalid VID frames */);
|
|
robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL5, disable ? 0 :
|
|
(1 << 3) /* drop miss V table frames */);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int handle_reset(void *driver, char *buf, int nr)
|
|
{
|
|
switch_driver *d = (switch_driver *) driver;
|
|
switch_vlan_config *c = switch_parse_vlan(d, buf);
|
|
int j;
|
|
__u16 val16;
|
|
|
|
if (c == NULL)
|
|
return -EINVAL;
|
|
|
|
/* disable switching */
|
|
set_switch(0);
|
|
|
|
/* reset vlans */
|
|
for (j = 0; j <= (is_5350 ? VLAN_ID_MAX5350 : VLAN_ID_MAX); j++) {
|
|
/* write config now */
|
|
val16 = (j) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */;
|
|
if (is_5350)
|
|
robo_write32(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5350, 0);
|
|
else
|
|
robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE, 0);
|
|
robo_write16(ROBO_VLAN_PAGE, (is_5350 ? ROBO_VLAN_TABLE_ACCESS_5350 : ROBO_VLAN_TABLE_ACCESS), val16);
|
|
}
|
|
|
|
/* reset ports to a known good state */
|
|
for (j = 0; j < d->ports; j++) {
|
|
robo_write16(ROBO_CTRL_PAGE, port[j], 0x0000);
|
|
robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1), 0);
|
|
}
|
|
|
|
/* enable switching */
|
|
set_switch(1);
|
|
|
|
/* enable vlans */
|
|
handle_enable_vlan_write(driver, "1", 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init robo_init(void)
|
|
{
|
|
int notfound = 1;
|
|
|
|
device = strdup("ethX");
|
|
for (device[3] = '0'; (device[3] <= '3') && notfound; device[3]++) {
|
|
notfound = robo_probe(device);
|
|
}
|
|
device[3]--;
|
|
|
|
if (notfound) {
|
|
kfree(device);
|
|
return -ENODEV;
|
|
} else {
|
|
switch_config cfg[] = {
|
|
{"enable", handle_enable_read, handle_enable_write},
|
|
{"enable_vlan", handle_enable_vlan_read, handle_enable_vlan_write},
|
|
{"reset", NULL, handle_reset},
|
|
{NULL, NULL, NULL}
|
|
};
|
|
switch_config vlan[] = {
|
|
{"ports", handle_vlan_port_read, handle_vlan_port_write},
|
|
{NULL, NULL, NULL}
|
|
};
|
|
switch_driver driver = {
|
|
name: DRIVER_NAME,
|
|
version: DRIVER_VERSION,
|
|
interface: device,
|
|
cpuport: 5,
|
|
ports: 6,
|
|
vlans: 16,
|
|
driver_handlers: cfg,
|
|
port_handlers: NULL,
|
|
vlan_handlers: vlan,
|
|
};
|
|
|
|
return switch_register_driver(&driver);
|
|
}
|
|
}
|
|
|
|
static void __exit robo_exit(void)
|
|
{
|
|
switch_unregister_driver(DRIVER_NAME);
|
|
kfree(device);
|
|
}
|
|
|
|
|
|
MODULE_AUTHOR("Felix Fietkau <openwrt@nbd.name>");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(robo_init);
|
|
module_exit(robo_exit);
|