juhosg 1a883422c6 ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205) ... The attached patch adds a preliminary support for Prolink PWH2004 board (Ralink RT305x based). LAN and flash appear to work. However, the USB port and WLAN I have not managed to activate properly yet, but that problem appears to be present with other rt305x targets as well(?). Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23129 3c298f89-4303-0410-b956-a3cf2f4a3e73		2010-09-27 14:43:34 +00:00
..
devices.c	The ralink rt305x board has a wireless card that can be used with the rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>	2010-03-30 12:04:05 +00:00
devices.h	ramips: annotate device register function prototypes with __init	2010-03-31 08:40:28 +00:00
early_printk.c	[ramips] initial support for RT288x/RT305x	2009-08-30 19:15:51 +00:00
irq.c	[ramips] share common INTC code	2009-08-30 19:15:58 +00:00
Kconfig	ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)	2010-09-27 14:43:34 +00:00
mach-dir-300-revb.c	ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons	2010-04-22 09:25:37 +00:00
mach-fonera20n.c	ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons	2010-04-22 09:25:37 +00:00
mach-pwh2004.c	ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)	2010-09-27 14:43:34 +00:00
mach-v22rw-2x2.c	ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons	2010-04-22 09:25:37 +00:00
mach-wcr150gn.c	ramips: add support for Sparklan WCR-150GN board	2010-08-15 09:43:07 +00:00
mach-whr-g300n.c	ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons	2010-04-22 09:25:37 +00:00
Makefile	ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)	2010-09-27 14:43:34 +00:00
rt305x.c	[ramips] add GPIO configuration feature	2009-09-04 15:08:26 +00:00
setup.c	[ramips] use common code for early_serial setup	2009-09-02 12:44:17 +00:00