mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-19 17:20:38 +02:00
fc54b9bf15
(stable-branch of Openmoko) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13613 3c298f89-4303-0410-b956-a3cf2f4a3e73
262 lines
8.7 KiB
Diff
262 lines
8.7 KiB
Diff
From 9e7ba57b104e9293f746342b7450b10d5fa0c4cd Mon Sep 17 00:00:00 2001
|
|
From: Andy Green <andy@openmoko.com>
|
|
Date: Mon, 22 Sep 2008 22:38:03 +0100
|
|
Subject: [PATCH] fix-glamo-mci-slow-clock-until-first-bulk.patch
|
|
|
|
This patch adds another module parameter to glamo-mci which sets the
|
|
SD Card clock rate used inbetween powering the card and the completion of
|
|
the first bulk transfer. You can set it from kernel commandline like this.
|
|
|
|
glamo_mci.sd_post_power_clock=1000000
|
|
|
|
The period between changing the power state and the first bulk transfer
|
|
completion is critical because larger SDHC cards take longer to initialize
|
|
before they can service the bulk transfer, and the Glamo MMC unit has a
|
|
fixed timeout length of a maximum of 4095 x 16 x SD Card clocks. Large
|
|
cards like 8GB Sandisk SDHC are not ready before this timeout is used up
|
|
at default 16MHz.
|
|
|
|
Subsequently, the card can handle 16MHz SD Clock and timeout durations
|
|
okay.
|
|
|
|
By default this patch operates the SD Clock at only 1MHz until the first
|
|
bulk transfer is completed after each powerup action from the MCI stack. It
|
|
also keeps the SD Clock running during this time, and disables the SD Clock
|
|
if the card is not present and the MCI stack removes power.
|
|
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
---
|
|
drivers/mfd/glamo/glamo-mci.c | 108 +++++++++++++++++++++++++----------------
|
|
drivers/mfd/glamo/glamo-mci.h | 2 +
|
|
2 files changed, 68 insertions(+), 42 deletions(-)
|
|
|
|
diff --git a/drivers/mfd/glamo/glamo-mci.c b/drivers/mfd/glamo/glamo-mci.c
|
|
index 3eece08..cff43db 100644
|
|
--- a/drivers/mfd/glamo/glamo-mci.c
|
|
+++ b/drivers/mfd/glamo/glamo-mci.c
|
|
@@ -74,6 +74,23 @@ static int sd_slow_ratio = 8;
|
|
module_param(sd_slow_ratio, int, 0644);
|
|
|
|
/*
|
|
+ * Post-power SD clock rate
|
|
+ *
|
|
+ * you can override this on kernel commandline using
|
|
+ *
|
|
+ * glamo_mci.sd_post_power_clock=1000000
|
|
+ *
|
|
+ * for example
|
|
+ *
|
|
+ * After changing power to card, clock is held at this rate until first bulk
|
|
+ * transfer completes
|
|
+ */
|
|
+
|
|
+static int sd_post_power_clock = 1000000;
|
|
+module_param(sd_post_power_clock, int, 0644);
|
|
+
|
|
+
|
|
+/*
|
|
* SD Signal drive strength
|
|
*
|
|
* you can override this on kernel commandline using
|
|
@@ -240,21 +257,35 @@ static void __glamo_mci_fix_card_div(struct glamo_mci_host *host, int div)
|
|
writew(readw(glamo_mci_def_pdata.pglamo->base +
|
|
GLAMO_REG_CLOCK_GEN5_1) & (~GLAMO_CLOCK_GEN51_EN_DIV_TCLK),
|
|
glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN5_1);
|
|
- } else {
|
|
- /* set the nearest prescaler factor
|
|
- *
|
|
- * register shared with SCLK divisor -- no chance of race because
|
|
- * we don't use sensor interface
|
|
- */
|
|
- writew_dly((readw(glamo_mci_def_pdata.pglamo->base +
|
|
- GLAMO_REG_CLOCK_GEN8) & 0xff00) | div,
|
|
- glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN8);
|
|
- /* enable clock to divider input */
|
|
- writew_dly(readw(glamo_mci_def_pdata.pglamo->base +
|
|
- GLAMO_REG_CLOCK_GEN5_1) | GLAMO_CLOCK_GEN51_EN_DIV_TCLK,
|
|
- glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN5_1);
|
|
+
|
|
+ goto done;
|
|
}
|
|
|
|
+ if (host->force_slow_during_powerup)
|
|
+ div = host->clk_rate / sd_post_power_clock;
|
|
+ else
|
|
+ if (host->pdata->glamo_mci_use_slow)
|
|
+ if ((host->pdata->glamo_mci_use_slow)())
|
|
+ div = div * sd_slow_ratio;
|
|
+
|
|
+ if (div > 255)
|
|
+ div = 255;
|
|
+
|
|
+ /*
|
|
+ * set the nearest prescaler factor
|
|
+ *
|
|
+ * register shared with SCLK divisor -- no chance of race because
|
|
+ * we don't use sensor interface
|
|
+ */
|
|
+ writew_dly((readw(glamo_mci_def_pdata.pglamo->base +
|
|
+ GLAMO_REG_CLOCK_GEN8) & 0xff00) | div,
|
|
+ glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN8);
|
|
+ /* enable clock to divider input */
|
|
+ writew_dly(readw(glamo_mci_def_pdata.pglamo->base +
|
|
+ GLAMO_REG_CLOCK_GEN5_1) | GLAMO_CLOCK_GEN51_EN_DIV_TCLK,
|
|
+ glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN5_1);
|
|
+
|
|
+done:
|
|
spin_unlock_irqrestore(&clock_lock, flags);
|
|
}
|
|
|
|
@@ -284,7 +315,7 @@ static int __glamo_mci_set_card_clock(struct glamo_mci_host *host, int freq,
|
|
if (division)
|
|
*division = 0xff;
|
|
|
|
- if (!sd_idleclk)
|
|
+ if (!sd_idleclk && !host->force_slow_during_powerup)
|
|
/* clock off */
|
|
__glamo_mci_fix_card_div(host, -1);
|
|
}
|
|
@@ -327,6 +358,10 @@ static void glamo_mci_irq(unsigned int irq, struct irq_desc *desc)
|
|
goto done;
|
|
}
|
|
|
|
+ /* disable the initial slow start after first bulk transfer */
|
|
+ if (host->force_slow_during_powerup)
|
|
+ host->force_slow_during_powerup--;
|
|
+
|
|
if (host->pio_active == XFER_READ)
|
|
do_pio_read(host);
|
|
|
|
@@ -341,7 +376,7 @@ static void glamo_mci_irq(unsigned int irq, struct irq_desc *desc)
|
|
host->cmd_is_stop = 0;
|
|
}
|
|
|
|
- if (!sd_idleclk)
|
|
+ if (!sd_idleclk && !host->force_slow_during_powerup)
|
|
/* clock off */
|
|
__glamo_mci_fix_card_div(host, -1);
|
|
|
|
@@ -357,7 +392,6 @@ static int glamo_mci_send_command(struct glamo_mci_host *host,
|
|
{
|
|
u8 u8a[6];
|
|
u16 fire = 0;
|
|
- u16 timeout = 0xfff; /* max glamo MMC timeout, in units of 16 clocks */
|
|
|
|
/* if we can't do it, reject as busy */
|
|
if (!readw_dly(host->base + GLAMO_REG_MMC_RB_STAT1) &
|
|
@@ -467,15 +501,9 @@ static int glamo_mci_send_command(struct glamo_mci_host *host,
|
|
fire |= GLAMO_FIRE_MMC_CC_BASIC; /* "basic command" */
|
|
break;
|
|
}
|
|
- /* enforce timeout, clipping at default 65520 clocks if larger */
|
|
- if (cmd->data)
|
|
- /* so long as there is one... */
|
|
- if (cmd->data->timeout_clks &&
|
|
- /* ... and it is not longer than we can handle */
|
|
- (cmd->data->timeout_clks <= 0xffff))
|
|
- timeout = cmd->data->timeout_clks >> 4; /* / 16 clks */
|
|
|
|
- writew(timeout, host->base + GLAMO_REG_MMC_TIMEOUT);
|
|
+ /* always largest timeout */
|
|
+ writew(0xfff, host->base + GLAMO_REG_MMC_TIMEOUT);
|
|
|
|
/* Generate interrupt on txfer */
|
|
writew_dly((readw_dly(host->base + GLAMO_REG_MMC_BASIC) & 0x3e) |
|
|
@@ -576,14 +604,7 @@ static void glamo_mci_send_request(struct mmc_host *mmc)
|
|
/* resume requested clock rate
|
|
* scale it down by sd_slow_ratio if platform requests it
|
|
*/
|
|
- if (host->pdata->glamo_mci_use_slow)
|
|
- if ((host->pdata->glamo_mci_use_slow)())
|
|
- __glamo_mci_fix_card_div(host, host->clk_div *
|
|
- sd_slow_ratio);
|
|
- else
|
|
- __glamo_mci_fix_card_div(host, host->clk_div);
|
|
- else
|
|
- __glamo_mci_fix_card_div(host, host->clk_div);
|
|
+ __glamo_mci_fix_card_div(host, host->clk_div);
|
|
|
|
if (glamo_mci_send_command(host, cmd))
|
|
goto bail;
|
|
@@ -633,6 +654,7 @@ static void glamo_mci_send_request(struct mmc_host *mmc)
|
|
goto done;
|
|
if (!(cmd->data->flags & (MMC_DATA_READ | MMC_DATA_WRITE)))
|
|
goto done;
|
|
+
|
|
/*
|
|
* Otherwise can can use the interrupt as async completion --
|
|
* if there is read data coming, or we wait for write data to complete,
|
|
@@ -676,7 +698,7 @@ done:
|
|
host->mrq = NULL;
|
|
mmc_request_done(host->mmc, cmd->mrq);
|
|
bail:
|
|
- if (!sd_idleclk)
|
|
+ if (!sd_idleclk && !host->force_slow_during_powerup)
|
|
/* stop the clock to card */
|
|
__glamo_mci_fix_card_div(host, -1);
|
|
}
|
|
@@ -718,6 +740,12 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
switch(ios->power_mode) {
|
|
case MMC_POWER_ON:
|
|
case MMC_POWER_UP:
|
|
+ /*
|
|
+ * we should use very slow clock until first bulk
|
|
+ * transfer completes OK
|
|
+ */
|
|
+ host->force_slow_during_powerup = 1;
|
|
+
|
|
if (host->vdd_current != ios->vdd) {
|
|
host->pdata->glamo_set_mci_power(ios->power_mode,
|
|
ios->vdd);
|
|
@@ -734,6 +762,9 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
default:
|
|
if (host->power_mode_current == MMC_POWER_OFF)
|
|
break;
|
|
+ /* never want clocking with dead card */
|
|
+ __glamo_mci_fix_card_div(host, -1);
|
|
+
|
|
glamo_engine_disable(glamo_mci_def_pdata.pglamo,
|
|
GLAMO_ENGINE_MMC);
|
|
host->pdata->glamo_set_mci_power(MMC_POWER_OFF, 0);
|
|
@@ -751,7 +782,7 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
if (powering)
|
|
msleep(1);
|
|
|
|
- if (!sd_idleclk)
|
|
+ if (!sd_idleclk && !host->force_slow_during_powerup)
|
|
/* stop the clock to card, because we are idle until transfer */
|
|
__glamo_mci_fix_card_div(host, -1);
|
|
|
|
@@ -954,14 +985,7 @@ static int glamo_mci_suspend(struct platform_device *dev, pm_message_t state)
|
|
* make sure the clock was running during suspend and consequently
|
|
* resume
|
|
*/
|
|
- if (host->pdata->glamo_mci_use_slow)
|
|
- if ((host->pdata->glamo_mci_use_slow)())
|
|
- __glamo_mci_fix_card_div(host, host->clk_div *
|
|
- sd_slow_ratio);
|
|
- else
|
|
- __glamo_mci_fix_card_div(host, host->clk_div);
|
|
- else
|
|
- __glamo_mci_fix_card_div(host, host->clk_div);
|
|
+ __glamo_mci_fix_card_div(host, host->clk_div);
|
|
|
|
/* we are going to do more commands to override this in
|
|
* mmc_suspend_host(), so we need to change sd_idleclk for the
|
|
diff --git a/drivers/mfd/glamo/glamo-mci.h b/drivers/mfd/glamo/glamo-mci.h
|
|
index f3f170e..38f6376 100644
|
|
--- a/drivers/mfd/glamo/glamo-mci.h
|
|
+++ b/drivers/mfd/glamo/glamo-mci.h
|
|
@@ -44,6 +44,8 @@ struct glamo_mci_host {
|
|
unsigned long real_rate;
|
|
u8 prescaler;
|
|
|
|
+ int force_slow_during_powerup;
|
|
+
|
|
unsigned sdiimsk;
|
|
int dodma;
|
|
|
|
--
|
|
1.5.6.5
|
|
|