mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-15 09:38:28 +02:00
d2f6c11460
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31126 3c298f89-4303-0410-b956-a3cf2f4a3e73
574 lines
15 KiB
Diff
574 lines
15 KiB
Diff
--- a/drivers/ssb/Kconfig
|
|
+++ b/drivers/ssb/Kconfig
|
|
@@ -137,6 +137,12 @@ config SSB_DRIVER_MIPS
|
|
|
|
If unsure, say N
|
|
|
|
+config SSB_SFLASH
|
|
+ bool
|
|
+ depends on SSB_DRIVER_MIPS
|
|
+ default y
|
|
+
|
|
+
|
|
# Assumption: We are on embedded, if we compile the MIPS core.
|
|
config SSB_EMBEDDED
|
|
bool
|
|
--- a/drivers/ssb/Makefile
|
|
+++ b/drivers/ssb/Makefile
|
|
@@ -11,6 +11,7 @@ ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o
|
|
# built-in drivers
|
|
ssb-y += driver_chipcommon.o
|
|
ssb-y += driver_chipcommon_pmu.o
|
|
+ssb-$(CONFIG_SSB_SFLASH) += driver_chipcommon_sflash.o
|
|
ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
|
|
ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
|
|
ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
|
|
--- /dev/null
|
|
+++ b/drivers/ssb/driver_chipcommon_sflash.c
|
|
@@ -0,0 +1,451 @@
|
|
+/*
|
|
+ * Broadcom SiliconBackplane chipcommon serial flash interface
|
|
+ *
|
|
+ * Copyright 2011, Jonas Gorski <jonas.gorski@gmail.com>
|
|
+ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
|
|
+ * Copyright 2010, Broadcom Corporation
|
|
+ *
|
|
+ * Licensed under the GNU/GPL. See COPYING for details.
|
|
+ */
|
|
+
|
|
+#include <linux/ssb/ssb.h>
|
|
+#include <linux/ssb/ssb_driver_chipcommon.h>
|
|
+#include <linux/delay.h>
|
|
+
|
|
+#include "ssb_private.h"
|
|
+
|
|
+#define NUM_RETRIES 3
|
|
+
|
|
+
|
|
+/* Issue a serial flash command */
|
|
+static inline void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode)
|
|
+{
|
|
+ chipco_write32(cc, SSB_CHIPCO_FLASHCTL,
|
|
+ SSB_CHIPCO_FLASHCTL_START | opcode);
|
|
+ while (chipco_read32(cc, SSB_CHIPCO_FLASHCTL)
|
|
+ & SSB_CHIPCO_FLASHCTL_BUSY)
|
|
+ ;
|
|
+}
|
|
+
|
|
+
|
|
+static inline void ssb_sflash_write_u8(struct ssb_chipcommon *cc,
|
|
+ u32 offset, u8 byte)
|
|
+{
|
|
+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset);
|
|
+ chipco_write32(cc, SSB_CHIPCO_FLASHDATA, byte);
|
|
+}
|
|
+
|
|
+/* Initialize serial flash access */
|
|
+int ssb_sflash_init(struct ssb_chipcommon *cc)
|
|
+{
|
|
+ u32 id, id2;
|
|
+
|
|
+ memset(&cc->sflash, 0, sizeof(struct ssb_sflash));
|
|
+
|
|
+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
|
|
+ case SSB_CHIPCO_FLASHT_STSER:
|
|
+ /* Probe for ST chips */
|
|
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP);
|
|
+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0);
|
|
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
|
|
+ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
|
|
+ cc->sflash.blocksize = 64 * 1024;
|
|
+ switch (id) {
|
|
+ case 0x11:
|
|
+ /* ST M25P20 2 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 4;
|
|
+ break;
|
|
+ case 0x12:
|
|
+ /* ST M25P40 4 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 8;
|
|
+ break;
|
|
+ case 0x13:
|
|
+ /* ST M25P80 8 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 16;
|
|
+ break;
|
|
+ case 0x14:
|
|
+ /* ST M25P16 16 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 32;
|
|
+ break;
|
|
+ case 0x15:
|
|
+ /* ST M25P32 32 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 64;
|
|
+ break;
|
|
+ case 0x16:
|
|
+ /* ST M25P64 64 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 128;
|
|
+ break;
|
|
+ case 0x17:
|
|
+ /* ST M25FL128 128 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 256;
|
|
+ break;
|
|
+ case 0xbf:
|
|
+ /* All of the following flashes are SST with
|
|
+ * 4KB subsectors. Others should be added but
|
|
+ * We'll have to revamp the way we identify them
|
|
+ * since RES is not eough to disambiguate them.
|
|
+ */
|
|
+ cc->sflash.blocksize = 4 * 1024;
|
|
+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1);
|
|
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
|
|
+ id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
|
|
+ switch (id2) {
|
|
+ case 1:
|
|
+ /* SST25WF512 512 Kbit Serial Flash */
|
|
+ case 0x48:
|
|
+ /* SST25VF512 512 Kbit Serial Flash */
|
|
+ cc->sflash.numblocks = 16;
|
|
+ break;
|
|
+ case 2:
|
|
+ /* SST25WF010 1 Mbit Serial Flash */
|
|
+ case 0x49:
|
|
+ /* SST25VF010 1 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 32;
|
|
+ break;
|
|
+ case 3:
|
|
+ /* SST25WF020 2 Mbit Serial Flash */
|
|
+ case 0x43:
|
|
+ /* SST25VF020 2 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 64;
|
|
+ break;
|
|
+ case 4:
|
|
+ /* SST25WF040 4 Mbit Serial Flash */
|
|
+ case 0x44:
|
|
+ /* SST25VF040 4 Mbit Serial Flash */
|
|
+ case 0x8d:
|
|
+ /* SST25VF040B 4 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 128;
|
|
+ break;
|
|
+ case 5:
|
|
+ /* SST25WF080 8 Mbit Serial Flash */
|
|
+ case 0x8e:
|
|
+ /* SST25VF080B 8 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 256;
|
|
+ break;
|
|
+ case 0x41:
|
|
+ /* SST25VF016 16 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 512;
|
|
+ break;
|
|
+ case 0x4a:
|
|
+ /* SST25VF032 32 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 1024;
|
|
+ break;
|
|
+ case 0x4b:
|
|
+ /* SST25VF064 64 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 2048;
|
|
+ break;
|
|
+ }
|
|
+ break;
|
|
+ }
|
|
+ break;
|
|
+
|
|
+ case SSB_CHIPCO_FLASHT_ATSER:
|
|
+ /* Probe for Atmel chips */
|
|
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
|
|
+ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c;
|
|
+ switch (id) {
|
|
+ case 0xc:
|
|
+ /* Atmel AT45DB011 1Mbit Serial Flash */
|
|
+ cc->sflash.blocksize = 256;
|
|
+ cc->sflash.numblocks = 512;
|
|
+ break;
|
|
+ case 0x14:
|
|
+ /* Atmel AT45DB021 2Mbit Serial Flash */
|
|
+ cc->sflash.blocksize = 256;
|
|
+ cc->sflash.numblocks = 1024;
|
|
+ break;
|
|
+ case 0x1c:
|
|
+ /* Atmel AT45DB041 4Mbit Serial Flash */
|
|
+ cc->sflash.blocksize = 256;
|
|
+ cc->sflash.numblocks = 2048;
|
|
+ break;
|
|
+ case 0x24:
|
|
+ /* Atmel AT45DB081 8Mbit Serial Flash */
|
|
+ cc->sflash.blocksize = 256;
|
|
+ cc->sflash.numblocks = 4096;
|
|
+ break;
|
|
+ case 0x2c:
|
|
+ /* Atmel AT45DB161 16Mbit Serial Flash */
|
|
+ cc->sflash.blocksize = 512;
|
|
+ cc->sflash.numblocks = 4096;
|
|
+ break;
|
|
+ case 0x34:
|
|
+ /* Atmel AT45DB321 32Mbit Serial Flash */
|
|
+ cc->sflash.blocksize = 512;
|
|
+ cc->sflash.numblocks = 8192;
|
|
+ break;
|
|
+ case 0x3c:
|
|
+ /* Atmel AT45DB642 64Mbit Serial Flash */
|
|
+ cc->sflash.blocksize = 1024;
|
|
+ cc->sflash.numblocks = 8192;
|
|
+ break;
|
|
+ }
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ cc->sflash.size = cc->sflash.blocksize * cc->sflash.numblocks;
|
|
+
|
|
+ return cc->sflash.size ? 0 : -ENODEV;
|
|
+}
|
|
+
|
|
+/* Read len bytes starting at offset into buf. Returns number of bytes read. */
|
|
+int ssb_sflash_read(struct ssb_chipcommon *cc, u32 offset, u32 len, u8 *buf)
|
|
+{
|
|
+ u8 *from, *to;
|
|
+ u32 cnt, i;
|
|
+
|
|
+ if (!len)
|
|
+ return 0;
|
|
+
|
|
+ if ((offset + len) > cc->sflash.size)
|
|
+ return -EINVAL;
|
|
+
|
|
+ if ((len >= 4) && (offset & 3))
|
|
+ cnt = 4 - (offset & 3);
|
|
+ else if ((len >= 4) && ((u32)buf & 3))
|
|
+ cnt = 4 - ((u32)buf & 3);
|
|
+ else
|
|
+ cnt = len;
|
|
+
|
|
+
|
|
+ if (cc->dev->id.revision == 12)
|
|
+ from = (u8 *)KSEG1ADDR(SSB_FLASH2 + offset);
|
|
+ else
|
|
+ from = (u8 *)KSEG0ADDR(SSB_FLASH2 + offset);
|
|
+
|
|
+ to = (u8 *)buf;
|
|
+
|
|
+ if (cnt < 4) {
|
|
+ for (i = 0; i < cnt; i++) {
|
|
+ *to = readb(from);
|
|
+ from++;
|
|
+ to++;
|
|
+ }
|
|
+ return cnt;
|
|
+ }
|
|
+
|
|
+ while (cnt >= 4) {
|
|
+ *(u32 *)to = readl(from);
|
|
+ from += 4;
|
|
+ to += 4;
|
|
+ cnt -= 4;
|
|
+ }
|
|
+
|
|
+ return len - cnt;
|
|
+}
|
|
+
|
|
+/* Poll for command completion. Returns zero when complete. */
|
|
+int ssb_sflash_poll(struct ssb_chipcommon *cc, u32 offset)
|
|
+{
|
|
+ if (offset >= cc->sflash.size)
|
|
+ return -22;
|
|
+
|
|
+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
|
|
+ case SSB_CHIPCO_FLASHT_STSER:
|
|
+ /* Check for ST Write In Progress bit */
|
|
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RDSR);
|
|
+ return chipco_read32(cc, SSB_CHIPCO_FLASHDATA)
|
|
+ & SSB_CHIPCO_FLASHSTA_ST_WIP;
|
|
+ case SSB_CHIPCO_FLASHT_ATSER:
|
|
+ /* Check for Atmel Ready bit */
|
|
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
|
|
+ return !(chipco_read32(cc, SSB_CHIPCO_FLASHDATA)
|
|
+ & SSB_CHIPCO_FLASHSTA_AT_READY);
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+
|
|
+static int sflash_st_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
|
|
+ const u8 *buf)
|
|
+{
|
|
+ struct ssb_bus *bus = cc->dev->bus;
|
|
+ int ret = 0;
|
|
+ bool is4712b0 = (bus->chip_id == 0x4712) && (bus->chip_rev == 3);
|
|
+ u32 mask;
|
|
+
|
|
+ /* Enable writes */
|
|
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_WREN);
|
|
+ if (is4712b0) {
|
|
+ mask = 1 << 14;
|
|
+ ssb_sflash_write_u8(cc, offset, *buf++);
|
|
+ /* Set chip select */
|
|
+ chipco_set32(cc, SSB_CHIPCO_GPIOOUT, mask);
|
|
+ /* Issue a page program with the first byte */
|
|
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_PP);
|
|
+ ret = 1;
|
|
+ offset++;
|
|
+ len--;
|
|
+ while (len > 0) {
|
|
+ if ((offset & 255) == 0) {
|
|
+ /* Page boundary, drop cs and return */
|
|
+ chipco_mask32(cc, SSB_CHIPCO_GPIOOUT, ~mask);
|
|
+ udelay(1);
|
|
+ if (!ssb_sflash_poll(cc, offset)) {
|
|
+ /* Flash rejected command */
|
|
+ return -EAGAIN;
|
|
+ }
|
|
+ return ret;
|
|
+ } else {
|
|
+ /* Write single byte */
|
|
+ ssb_sflash_cmd(cc, *buf++);
|
|
+ }
|
|
+ ret++;
|
|
+ offset++;
|
|
+ len--;
|
|
+ }
|
|
+ /* All done, drop cs */
|
|
+ chipco_mask32(cc, SSB_CHIPCO_GPIOOUT, ~mask);
|
|
+ udelay(1);
|
|
+ if (!ssb_sflash_poll(cc, offset)) {
|
|
+ /* Flash rejected command */
|
|
+ return -EAGAIN;
|
|
+ }
|
|
+ } else if (cc->dev->id.revision >= 20) {
|
|
+ ssb_sflash_write_u8(cc, offset, *buf++);
|
|
+ /* Issue a page program with CSA bit set */
|
|
+ ssb_sflash_cmd(cc,
|
|
+ SSB_CHIPCO_FLASHCTL_ST_CSA |
|
|
+ SSB_CHIPCO_FLASHCTL_ST_PP);
|
|
+ ret = 1;
|
|
+ offset++;
|
|
+ len--;
|
|
+ while (len > 0) {
|
|
+ if ((offset & 255) == 0) {
|
|
+ /* Page boundary, poll droping cs and return */
|
|
+ chipco_write32(cc, SSB_CHIPCO_FLASHCTL, 0);
|
|
+ udelay(1);
|
|
+ if (!ssb_sflash_poll(cc, offset)) {
|
|
+ /* Flash rejected command */
|
|
+ return -EAGAIN;
|
|
+ }
|
|
+ return ret;
|
|
+ } else {
|
|
+ /* Write single byte */
|
|
+ ssb_sflash_cmd(cc,
|
|
+ SSB_CHIPCO_FLASHCTL_ST_CSA |
|
|
+ *buf++);
|
|
+ }
|
|
+ ret++;
|
|
+ offset++;
|
|
+ len--;
|
|
+ }
|
|
+ /* All done, drop cs & poll */
|
|
+ chipco_write32(cc, SSB_CHIPCO_FLASHCTL, 0);
|
|
+ udelay(1);
|
|
+ if (!ssb_sflash_poll(cc, offset)) {
|
|
+ /* Flash rejected command */
|
|
+ return -EAGAIN;
|
|
+ }
|
|
+ } else {
|
|
+ ret = 1;
|
|
+ ssb_sflash_write_u8(cc, offset, *buf);
|
|
+ /* Page program */
|
|
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_PP);
|
|
+ }
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int sflash_at_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
|
|
+ const u8 *buf)
|
|
+{
|
|
+ struct ssb_sflash *sfl = &cc->sflash;
|
|
+ u32 page, byte, mask;
|
|
+ int ret = 0;
|
|
+ mask = sfl->blocksize - 1;
|
|
+ page = (offset & ~mask) << 1;
|
|
+ byte = offset & mask;
|
|
+ /* Read main memory page into buffer 1 */
|
|
+ if (byte || (len < sfl->blocksize)) {
|
|
+ int i = 100;
|
|
+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, page);
|
|
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD);
|
|
+ /* 250 us for AT45DB321B */
|
|
+ while (i > 0 && ssb_sflash_poll(cc, offset)) {
|
|
+ udelay(10);
|
|
+ i--;
|
|
+ }
|
|
+ BUG_ON(!ssb_sflash_poll(cc, offset));
|
|
+ }
|
|
+ /* Write into buffer 1 */
|
|
+ for (ret = 0; (ret < (int)len) && (byte < sfl->blocksize); ret++) {
|
|
+ ssb_sflash_write_u8(cc, byte++, *buf++);
|
|
+ ssb_sflash_cmd(cc,
|
|
+ SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE);
|
|
+ }
|
|
+ /* Write buffer 1 into main memory page */
|
|
+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, page);
|
|
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+/* Write len bytes starting at offset into buf. Returns number of bytes
|
|
+ * written. Caller should poll for completion.
|
|
+ */
|
|
+int ssb_sflash_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
|
|
+ const u8 *buf)
|
|
+{
|
|
+ struct ssb_sflash *sfl;
|
|
+ int ret = 0, tries = NUM_RETRIES;
|
|
+
|
|
+ if (!len)
|
|
+ return 0;
|
|
+
|
|
+ if ((offset + len) > cc->sflash.size)
|
|
+ return -EINVAL;
|
|
+
|
|
+ sfl = &cc->sflash;
|
|
+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
|
|
+ case SSB_CHIPCO_FLASHT_STSER:
|
|
+ do {
|
|
+ ret = sflash_st_write(cc, offset, len, buf);
|
|
+ tries--;
|
|
+ } while (ret == -EAGAIN && tries > 0);
|
|
+
|
|
+ if (ret == -EAGAIN && tries == 0) {
|
|
+ pr_info("ST Flash rejected write\n");
|
|
+ ret = -EIO;
|
|
+ }
|
|
+ break;
|
|
+ case SSB_CHIPCO_FLASHT_ATSER:
|
|
+ ret = sflash_at_write(cc, offset, len, buf);
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+/* Erase a region. Returns number of bytes scheduled for erasure.
|
|
+ * Caller should poll for completion.
|
|
+ */
|
|
+int ssb_sflash_erase(struct ssb_chipcommon *cc, u32 offset)
|
|
+{
|
|
+ struct ssb_sflash *sfl;
|
|
+
|
|
+ if (offset >= cc->sflash.size)
|
|
+ return -EINVAL;
|
|
+
|
|
+ sfl = &cc->sflash;
|
|
+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
|
|
+ case SSB_CHIPCO_FLASHT_STSER:
|
|
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_WREN);
|
|
+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset);
|
|
+ /* Newer flashes have "sub-sectors" which can be erased
|
|
+ * independently with a new command: ST_SSE. The ST_SE command
|
|
+ * erases 64KB just as before.
|
|
+ */
|
|
+ if (sfl->blocksize < (64 * 1024))
|
|
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_SSE);
|
|
+ else
|
|
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_SE);
|
|
+ return sfl->blocksize;
|
|
+ case SSB_CHIPCO_FLASHT_ATSER:
|
|
+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset << 1);
|
|
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE);
|
|
+ return sfl->blocksize;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
--- a/drivers/ssb/driver_mipscore.c
|
|
+++ b/drivers/ssb/driver_mipscore.c
|
|
@@ -203,7 +203,13 @@ static void ssb_mips_flash_detect(struct
|
|
switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
|
|
case SSB_CHIPCO_FLASHT_STSER:
|
|
case SSB_CHIPCO_FLASHT_ATSER:
|
|
+#ifdef CONFIG_SSB_SFLASH
|
|
+ pr_info("found serial flash.\n");
|
|
+ bus->chipco.flash_type = SSB_SFLASH;
|
|
+ ssb_sflash_init(&bus->chipco);
|
|
+#else
|
|
pr_info("serial flash not supported.\n");
|
|
+#endif /* CONFIG_SSB_SFLASH */
|
|
break;
|
|
case SSB_CHIPCO_FLASHT_PARA:
|
|
pr_info("found parallel flash.\n");
|
|
--- a/drivers/ssb/ssb_private.h
|
|
+++ b/drivers/ssb/ssb_private.h
|
|
@@ -192,6 +192,10 @@ extern int ssb_devices_freeze(struct ssb
|
|
extern int ssb_devices_thaw(struct ssb_freeze_context *ctx);
|
|
|
|
|
|
+#ifdef CONFIG_SSB_SFLASH
|
|
+/* driver_chipcommon_sflash.c */
|
|
+int ssb_sflash_init(struct ssb_chipcommon *cc);
|
|
+#endif /* CONFIG_SSB_SFLASH */
|
|
|
|
/* b43_pci_bridge.c */
|
|
#ifdef CONFIG_SSB_B43_PCI_BRIDGE
|
|
--- a/include/linux/ssb/ssb_driver_chipcommon.h
|
|
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
|
|
@@ -503,8 +503,10 @@
|
|
#define SSB_CHIPCO_FLASHCTL_ST_PP 0x0302 /* Page Program */
|
|
#define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */
|
|
#define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */
|
|
-#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00B9 /* Deep Power-down */
|
|
-#define SSB_CHIPCO_FLASHCTL_ST_RSIG 0x03AB /* Read Electronic Signature */
|
|
+#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00D9 /* Deep Power-down */
|
|
+#define SSB_CHIPCO_FLASHCTL_ST_RES 0x03AB /* Read Electronic Signature */
|
|
+#define SSB_CHIPCO_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */
|
|
+#define SSB_CHIPCO_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */
|
|
|
|
/* Status register bits for ST flashes */
|
|
#define SSB_CHIPCO_FLASHSTA_ST_WIP 0x01 /* Write In Progress */
|
|
@@ -585,6 +587,7 @@ struct ssb_chipcommon_pmu {
|
|
#ifdef CONFIG_SSB_DRIVER_MIPS
|
|
enum ssb_flash_type {
|
|
SSB_PFLASH,
|
|
+ SSB_SFLASH,
|
|
};
|
|
|
|
struct ssb_pflash {
|
|
@@ -592,6 +595,14 @@ struct ssb_pflash {
|
|
u32 window;
|
|
u32 window_size;
|
|
};
|
|
+
|
|
+#ifdef CONFIG_SSB_SFLASH
|
|
+struct ssb_sflash {
|
|
+ u32 blocksize; /* Block size */
|
|
+ u32 numblocks; /* Number of blocks */
|
|
+ u32 size; /* Total size in bytes */
|
|
+};
|
|
+#endif /* CONFIG_SSB_SFLASH */
|
|
#endif /* CONFIG_SSB_DRIVER_MIPS */
|
|
|
|
struct ssb_chipcommon {
|
|
@@ -605,6 +616,9 @@ struct ssb_chipcommon {
|
|
enum ssb_flash_type flash_type;
|
|
union {
|
|
struct ssb_pflash pflash;
|
|
+#ifdef CONFIG_SSB_SFLASH
|
|
+ struct ssb_sflash sflash;
|
|
+#endif /* CONFIG_SSB_SFLASH */
|
|
};
|
|
#endif /* CONFIG_SSB_DRIVER_MIPS */
|
|
};
|
|
@@ -666,6 +680,16 @@ extern int ssb_chipco_serial_init(struct
|
|
struct ssb_serial_port *ports);
|
|
#endif /* CONFIG_SSB_SERIAL */
|
|
|
|
+#ifdef CONFIG_SSB_SFLASH
|
|
+/* Chipcommon sflash support. */
|
|
+int ssb_sflash_read(struct ssb_chipcommon *cc, u32 offset, u32 len,
|
|
+ u8 *buf);
|
|
+int ssb_sflash_poll(struct ssb_chipcommon *cc, u32 offset);
|
|
+int ssb_sflash_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
|
|
+ const u8 *buf);
|
|
+int ssb_sflash_erase(struct ssb_chipcommon *cc, u32 offset);
|
|
+#endif /* CONFIG_SSB_SFLASH */
|
|
+
|
|
/* PMU support */
|
|
extern void ssb_pmu_init(struct ssb_chipcommon *cc);
|
|
|