mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-14 07:11:52 +02:00
94b5af79b4
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13137 3c298f89-4303-0410-b956-a3cf2f4a3e73
89 lines
2.9 KiB
Diff
89 lines
2.9 KiB
Diff
--- a/arch/cris/arch-v10/lib/hw_settings.S
|
|
+++ b/arch/cris/arch-v10/lib/hw_settings.S
|
|
@@ -60,3 +60,5 @@
|
|
.dword R_PORT_PB_SET
|
|
.dword PB_SET_VALUE
|
|
.dword 0 ; No more register values
|
|
+ .ascii "ACME_PART_MAGIC"
|
|
+ .dword 0xdeadc0de
|
|
--- a/arch/cris/arch-v10/drivers/axisflashmap.c
|
|
+++ b/arch/cris/arch-v10/drivers/axisflashmap.c
|
|
@@ -113,7 +113,7 @@ static struct map_info map_cse1 = {
|
|
|
|
/* If no partition-table was found, we use this default-set. */
|
|
#define MAX_PARTITIONS 7
|
|
-#define NUM_DEFAULT_PARTITIONS 3
|
|
+#define NUM_DEFAULT_PARTITIONS 2
|
|
|
|
/*
|
|
* Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the
|
|
@@ -122,19 +122,14 @@ static struct map_info map_cse1 = {
|
|
*/
|
|
static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = {
|
|
{
|
|
- .name = "boot firmware",
|
|
- .size = CONFIG_ETRAX_PTABLE_SECTOR,
|
|
- .offset = 0
|
|
- },
|
|
- {
|
|
.name = "kernel",
|
|
- .size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR),
|
|
- .offset = CONFIG_ETRAX_PTABLE_SECTOR
|
|
+ .size = 0x00,
|
|
+ .offset = 0
|
|
},
|
|
{
|
|
- .name = "filesystem",
|
|
- .size = 5 * CONFIG_ETRAX_PTABLE_SECTOR,
|
|
- .offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR)
|
|
+ .name = "rootfs",
|
|
+ .size = 0x200000 ,
|
|
+ .offset = 0x200000
|
|
}
|
|
};
|
|
|
|
@@ -281,6 +276,11 @@ static int __init init_axis_flash(void)
|
|
struct partitiontable_entry *ptable;
|
|
int use_default_ptable = 1; /* Until proven otherwise. */
|
|
const char pmsg[] = " /dev/flash%d at 0x%08x, size 0x%08x\n";
|
|
+ unsigned int kernel_part_size = 0;
|
|
+ unsigned char *flash_mem = (unsigned char*)(FLASH_CACHED_ADDR);
|
|
+ unsigned int flash_scan_count = 0;
|
|
+ const char *part_magic = "ACME_PART_MAGIC";
|
|
+ unsigned int magic_len = strlen(part_magic);
|
|
|
|
if (!(mymtd = flash_probe())) {
|
|
/* There's no reason to use this module if no flash chip can
|
|
@@ -292,6 +292,31 @@ static int __init init_axis_flash(void)
|
|
mymtd->name, mymtd->size);
|
|
axisflash_mtd = mymtd;
|
|
}
|
|
+ /* scan flash to findout where out partition starts */
|
|
+
|
|
+ printk(KERN_INFO "Scanning flash for end of kernel magic\n");
|
|
+ for(flash_scan_count = 0; flash_scan_count < 100000; flash_scan_count++){
|
|
+ if(strncmp(&flash_mem[flash_scan_count], part_magic, magic_len - 1) == 0)
|
|
+ {
|
|
+ kernel_part_size = flash_mem[flash_scan_count + magic_len ];
|
|
+ kernel_part_size <<= 8;
|
|
+ kernel_part_size += flash_mem[flash_scan_count + magic_len + 2];
|
|
+ kernel_part_size <<= 8;
|
|
+ kernel_part_size += flash_mem[flash_scan_count + magic_len + 1];
|
|
+ kernel_part_size <<= 8;
|
|
+ kernel_part_size += flash_mem[flash_scan_count + magic_len + 3];
|
|
+ printk(KERN_INFO "Kernel ends at 0x%.08X\n", kernel_part_size);
|
|
+ flash_scan_count = 1100000;
|
|
+ }
|
|
+ }
|
|
+
|
|
+
|
|
+ if(kernel_part_size){
|
|
+ kernel_part_size = (kernel_part_size & 0xffff0000);
|
|
+ axis_default_partitions[0].size = kernel_part_size;
|
|
+ axis_default_partitions[1].size = mymtd->size - axis_default_partitions[0].size;
|
|
+ axis_default_partitions[1].offset = axis_default_partitions[0].size;
|
|
+ }
|
|
|
|
if (mymtd) {
|
|
mymtd->owner = THIS_MODULE;
|