qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-21 12:05:32 +02:00
Code
d3db86b4cc
openwrt-xburst/target/linux/generic/patches-2.6.30/941-ssb_update.patch
hauke f61f0b7178 ssb: update ssb to version from linux-next-20110311 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13 17:24:28 +00:00

3068 lines
99 KiB
Diff
Raw Blame History

--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -66,6 +66,20 @@ config SSB_PCMCIAHOST
If unsure, say N
+config SSB_SDIOHOST_POSSIBLE
+ bool
+ depends on SSB && (MMC = y || MMC = SSB)
+ default y
+
+config SSB_SDIOHOST
+ bool "Support for SSB on SDIO-bus host"
+ depends on SSB_SDIOHOST_POSSIBLE
+ help
+ Support for a Sonics Silicon Backplane on top
+ of a SDIO device.
+
+ If unsure, say N
+
config SSB_SILENT
bool "No SSB kernel messages"
depends on SSB && EMBEDDED
--- a/drivers/ssb/Makefile
+++ b/drivers/ssb/Makefile
@@ -6,6 +6,7 @@ ssb-$(CONFIG_SSB_SPROM) += sprom.o
# host support
ssb-$(CONFIG_SSB_PCIHOST) += pci.o pcihost_wrapper.o
ssb-$(CONFIG_SSB_PCMCIAHOST) += pcmcia.o
+ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o
# built-in drivers
ssb-y += driver_chipcommon.o
--- a/drivers/ssb/b43_pci_bridge.c
+++ b/drivers/ssb/b43_pci_bridge.c
@@ -24,6 +24,7 @@ static const struct pci_device_id b43_pc
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4315) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BCM_GVC, 0x4318) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) },
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -209,6 +209,24 @@ static void chipco_powercontrol_init(str
}
}
+/* http://bcm-v4.sipsolutions.net/802.11/PmuFastPwrupDelay */
+static u16 pmu_fast_powerup_delay(struct ssb_chipcommon *cc)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+
+ switch (bus->chip_id) {
+ case 0x4312:
+ case 0x4322:
+ case 0x4328:
+ return 7000;
+ case 0x4325:
+ /* TODO: */
+ default:
+ return 15000;
+ }
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/ClkctlFastPwrupDelay */
static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
{
struct ssb_bus *bus = cc->dev->bus;
@@ -218,6 +236,12 @@ static void calc_fast_powerup_delay(stru
if (bus->bustype != SSB_BUSTYPE_PCI)
return;
+
+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
+ cc->fast_pwrup_delay = pmu_fast_powerup_delay(cc);
+ return;
+ }
+
if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
return;
@@ -233,6 +257,9 @@ void ssb_chipcommon_init(struct ssb_chip
{
if (!cc->dev)
return; /* We don't have a ChipCommon */
+ if (cc->dev->id.revision >= 11)
+ cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
+ ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
ssb_pmu_init(cc);
chipco_powercontrol_init(cc);
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
@@ -370,6 +397,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c
{
return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
}
+EXPORT_SYMBOL(ssb_chipco_gpio_control);
u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
{
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct
chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value);
}
+static void ssb_chipco_regctl_maskset(struct ssb_chipcommon *cc,
+ u32 offset, u32 mask, u32 set)
+{
+ u32 value;
+
+ chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR);
+ chipco_write32(cc, SSB_CHIPCO_REGCTL_ADDR, offset);
+ chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR);
+ value = chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA);
+ value &= mask;
+ value |= set;
+ chipco_write32(cc, SSB_CHIPCO_REGCTL_DATA, value);
+ chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA);
+}
+
struct pmu0_plltab_entry {
u16 freq; /* Crystal frequency in kHz.*/
u8 xf; /* Crystal frequency value for PMU control */
@@ -317,6 +332,12 @@ static void ssb_pmu_pll_init(struct ssb_
case 0x5354:
ssb_pmu0_pllinit_r0(cc, crystalfreq);
break;
+ case 0x4322:
+ if (cc->pmu.rev == 2) {
+ chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, 0x0000000A);
+ chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0);
+ }
+ break;
default:
ssb_printk(KERN_ERR PFX
"ERROR: PLL init unknown for device %04X\n",
@@ -402,6 +423,7 @@ static void ssb_pmu_resources_init(struc
switch (bus->chip_id) {
case 0x4312:
+ case 0x4322:
/* We keep the default settings:
* min_msk = 0xCBB
* max_msk = 0x7FFFF
@@ -480,9 +502,9 @@ static void ssb_pmu_resources_init(struc
chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk);
}
+/* http://bcm-v4.sipsolutions.net/802.11/SSB/PmuInit */
void ssb_pmu_init(struct ssb_chipcommon *cc)
{
- struct ssb_bus *bus = cc->dev->bus;
u32 pmucap;
if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
@@ -494,15 +516,91 @@ void ssb_pmu_init(struct ssb_chipcommon
ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
cc->pmu.rev, pmucap);
- if (cc->pmu.rev >= 1) {
- if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) {
- chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
- ~SSB_CHIPCO_PMU_CTL_NOILPONW);
- } else {
- chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
- SSB_CHIPCO_PMU_CTL_NOILPONW);
- }
- }
+ if (cc->pmu.rev == 1)
+ chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
+ ~SSB_CHIPCO_PMU_CTL_NOILPONW);
+ else
+ chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
+ SSB_CHIPCO_PMU_CTL_NOILPONW);
ssb_pmu_pll_init(cc);
ssb_pmu_resources_init(cc);
}
+
+void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
+ enum ssb_pmu_ldo_volt_id id, u32 voltage)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+ u32 addr, shift, mask;
+
+ switch (bus->chip_id) {
+ case 0x4328:
+ case 0x5354:
+ switch (id) {
+ case LDO_VOLT1:
+ addr = 2;
+ shift = 25;
+ mask = 0xF;
+ break;
+ case LDO_VOLT2:
+ addr = 3;
+ shift = 1;
+ mask = 0xF;
+ break;
+ case LDO_VOLT3:
+ addr = 3;
+ shift = 9;
+ mask = 0xF;
+ break;
+ case LDO_PAREF:
+ addr = 3;
+ shift = 17;
+ mask = 0x3F;
+ break;
+ default:
+ SSB_WARN_ON(1);
+ return;
+ }
+ break;
+ case 0x4312:
+ if (SSB_WARN_ON(id != LDO_PAREF))
+ return;
+ addr = 0;
+ shift = 21;
+ mask = 0x3F;
+ break;
+ default:
+ return;
+ }
+
+ ssb_chipco_regctl_maskset(cc, addr, ~(mask << shift),
+ (voltage & mask) << shift);
+}
+
+void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+ int ldo;
+
+ switch (bus->chip_id) {
+ case 0x4312:
+ ldo = SSB_PMURES_4312_PA_REF_LDO;
+ break;
+ case 0x4328:
+ ldo = SSB_PMURES_4328_PA_REF_LDO;
+ break;
+ case 0x5354:
+ ldo = SSB_PMURES_5354_PA_REF_LDO;
+ break;
+ default:
+ return;
+ }
+
+ if (on)
+ chipco_set32(cc, SSB_CHIPCO_PMU_MINRES_MSK, 1 << ldo);
+ else
+ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ~(1 << ldo));
+ chipco_read32(cc, SSB_CHIPCO_PMU_MINRES_MSK); //SPEC FIXME found via mmiotrace - dummy read?
+}
+
+EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
+EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
--- a/drivers/ssb/driver_gige.c
+++ b/drivers/ssb/driver_gige.c
@@ -12,6 +12,7 @@
#include <linux/ssb/ssb_driver_gige.h>
#include <linux/pci.h>
#include <linux/pci_regs.h>
+#include <linux/slab.h>
/*
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -49,29 +49,54 @@ static const u32 ipsflag_irq_shift[] = {
static inline u32 ssb_irqflag(struct ssb_device *dev)
{
- return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG;
+ u32 tpsflag = ssb_read32(dev, SSB_TPSFLAG);
+ if (tpsflag)
+ return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG;
+ else
+ /* not irq supported */
+ return 0x3f;
+}
+
+static struct ssb_device *find_device(struct ssb_device *rdev, int irqflag)
+{
+ struct ssb_bus *bus = rdev->bus;
+ int i;
+ for (i = 0; i < bus->nr_devices; i++) {
+ struct ssb_device *dev;
+ dev = &(bus->devices[i]);
+ if (ssb_irqflag(dev) == irqflag)
+ return dev;
+ }
+ return NULL;
}
/* Get the MIPS IRQ assignment for a specified device.
* If unassigned, 0 is returned.
+ * If disabled, 5 is returned.
+ * If not supported, 6 is returned.
*/
unsigned int ssb_mips_irq(struct ssb_device *dev)
{
struct ssb_bus *bus = dev->bus;
+ struct ssb_device *mdev = bus->mipscore.dev;
u32 irqflag;
u32 ipsflag;
u32 tmp;
unsigned int irq;
irqflag = ssb_irqflag(dev);
+ if (irqflag == 0x3f)
+ return 6;
ipsflag = ssb_read32(bus->mipscore.dev, SSB_IPSFLAG);
for (irq = 1; irq <= 4; irq++) {
tmp = ((ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]);
if (tmp == irqflag)
break;
}
- if (irq == 5)
- irq = 0;
+ if (irq == 5) {
+ if ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC))
+ irq = 0;
+ }
return irq;
}
@@ -97,25 +122,56 @@ static void set_irq(struct ssb_device *d
struct ssb_device *mdev = bus->mipscore.dev;
u32 irqflag = ssb_irqflag(dev);
+ BUG_ON(oldirq == 6);
+
dev->irq = irq + 2;
- ssb_dprintk(KERN_INFO PFX
- "set_irq: core 0x%04x, irq %d => %d\n",
- dev->id.coreid, oldirq, irq);
/* clear the old irq */
if (oldirq == 0)
ssb_write32(mdev, SSB_INTVEC, (~(1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)));
- else
+ else if (oldirq != 5)
clear_irq(bus, oldirq);
/* assign the new one */
if (irq == 0) {
ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC)));
} else {
+ u32 ipsflag = ssb_read32(mdev, SSB_IPSFLAG);
+ if ((ipsflag & ipsflag_irq_mask[irq]) != ipsflag_irq_mask[irq]) {
+ u32 oldipsflag = (ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq];
+ struct ssb_device *olddev = find_device(dev, oldipsflag);
+ if (olddev)
+ set_irq(olddev, 0);
+ }
irqflag <<= ipsflag_irq_shift[irq];
- irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]);
+ irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
ssb_write32(mdev, SSB_IPSFLAG, irqflag);
}
+ ssb_dprintk(KERN_INFO PFX
+ "set_irq: core 0x%04x, irq %d => %d\n",
+ dev->id.coreid, oldirq+2, irq+2);
+}
+
+static void print_irq(struct ssb_device *dev, unsigned int irq)
+{
+ int i;
+ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
+ ssb_dprintk(KERN_INFO PFX
+ "core 0x%04x, irq :", dev->id.coreid);
+ for (i = 0; i <= 6; i++) {
+ ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
+ }
+ ssb_dprintk("\n");
+}
+
+static void dump_irq(struct ssb_bus *bus)
+{
+ int i;
+ for (i = 0; i < bus->nr_devices; i++) {
+ struct ssb_device *dev;
+ dev = &(bus->devices[i]);
+ print_irq(dev, ssb_mips_irq(dev));
+ }
}
static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
@@ -197,17 +253,23 @@ void ssb_mipscore_init(struct ssb_mipsco
/* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
for (irq = 2, i = 0; i < bus->nr_devices; i++) {
+ int mips_irq;
dev = &(bus->devices[i]);
- dev->irq = ssb_mips_irq(dev) + 2;
+ mips_irq = ssb_mips_irq(dev);
+ if (mips_irq > 4)
+ dev->irq = 0;
+ else
+ dev->irq = mips_irq + 2;
+ if (dev->irq > 5)
+ continue;
switch (dev->id.coreid) {
case SSB_DEV_USB11_HOST:
/* shouldn't need a separate irq line for non-4710, most of them have a proper
* external usb controller on the pci */
if ((bus->chip_id == 0x4710) && (irq <= 4)) {
set_irq(dev, irq++);
- break;
}
- /* fallthrough */
+ break;
case SSB_DEV_PCI:
case SSB_DEV_ETHERNET:
case SSB_DEV_ETHERNET_GBIT:
@@ -218,8 +280,14 @@ void ssb_mipscore_init(struct ssb_mipsco
set_irq(dev, irq++);
break;
}
+ /* fallthrough */
+ case SSB_DEV_EXTIF:
+ set_irq(dev, 0);
+ break;
}
}
+ ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
+ dump_irq(bus);
ssb_mips_serial_init(mcore);
ssb_mips_flash_detect(mcore);
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -246,20 +246,12 @@ static struct pci_controller ssb_pcicore
.pci_ops = &ssb_pcicore_pciops,
.io_resource = &ssb_pcicore_io_resource,
.mem_resource = &ssb_pcicore_mem_resource,
- .mem_offset = 0x24000000,
};
-static u32 ssb_pcicore_pcibus_iobase = 0x100;
-static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
-
/* This function is called when doing a pci_enable_device().
* We must first check if the device is a device on the PCI-core bridge. */
int ssb_pcicore_plat_dev_init(struct pci_dev *d)
{
- struct resource *res;
- int pos, size;
- u32 *base;
-
if (d->bus->ops != &ssb_pcicore_pciops) {
/* This is not a device on the PCI-core bridge. */
return -ENODEV;
@@ -268,27 +260,6 @@ int ssb_pcicore_plat_dev_init(struct pci
ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
pci_name(d));
- /* Fix up resource bases */
- for (pos = 0; pos < 6; pos++) {
- res = &d->resource[pos];
- if (res->flags & IORESOURCE_IO)
- base = &ssb_pcicore_pcibus_iobase;
- else
- base = &ssb_pcicore_pcibus_membase;
- res->flags |= IORESOURCE_PCI_FIXED;
- if (res->end) {
- size = res->end - res->start + 1;
- if (*base & (size - 1))
- *base = (*base + size) & ~(size - 1);
- res->start = *base;
- res->end = res->start + size - 1;
- *base += size;
- pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
- }
- /* Fix up PCI bridge BAR0 only */
- if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
- break;
- }
/* Fix up interrupt lines */
d->irq = ssb_mips_irq(extpci_core->dev) + 2;
pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
@@ -551,13 +522,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc
might_sleep_if(pdev->id.coreid != SSB_DEV_PCI);
/* Enable interrupts for this device. */
- if (bus->host_pci &&
- ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE))) {
+ if ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE)) {
u32 coremask;
/* Calculate the "coremask" for the device. */
coremask = (1 << dev->core_index);
+ SSB_WARN_ON(bus->bustype != SSB_BUSTYPE_PCI);
err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp);
if (err)
goto out;
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -17,6 +17,8 @@
#include <linux/ssb/ssb_driver_gige.h>
#include <linux/dma-mapping.h>
#include <linux/pci.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/slab.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
@@ -88,6 +90,25 @@ found:
}
#endif /* CONFIG_SSB_PCMCIAHOST */
+#ifdef CONFIG_SSB_SDIOHOST
+struct ssb_bus *ssb_sdio_func_to_bus(struct sdio_func *func)
+{
+ struct ssb_bus *bus;
+
+ ssb_buses_lock();
+ list_for_each_entry(bus, &buses, list) {
+ if (bus->bustype == SSB_BUSTYPE_SDIO &&
+ bus->host_sdio == func)
+ goto found;
+ }
+ bus = NULL;
+found:
+ ssb_buses_unlock();
+
+ return bus;
+}
+#endif /* CONFIG_SSB_SDIOHOST */
+
int ssb_for_each_bus_call(unsigned long data,
int (*func)(struct ssb_bus *bus, unsigned long data))
{
@@ -120,6 +141,19 @@ static void ssb_device_put(struct ssb_de
put_device(dev->dev);
}
+static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv)
+{
+ if (drv)
+ get_driver(&drv->drv);
+ return drv;
+}
+
+static inline void ssb_driver_put(struct ssb_driver *drv)
+{
+ if (drv)
+ put_driver(&drv->drv);
+}
+
static int ssb_device_resume(struct device *dev)
{
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
@@ -190,90 +224,81 @@ int ssb_bus_suspend(struct ssb_bus *bus)
EXPORT_SYMBOL(ssb_bus_suspend);
#ifdef CONFIG_SSB_SPROM
-int ssb_devices_freeze(struct ssb_bus *bus)
+/** ssb_devices_freeze - Freeze all devices on the bus.
+ *
+ * After freezing no device driver will be handling a device
+ * on this bus anymore. ssb_devices_thaw() must be called after
+ * a successful freeze to reactivate the devices.
+ *
+ * @bus: The bus.
+ * @ctx: Context structure. Pass this to ssb_devices_thaw().
+ */
+int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx)
{
- struct ssb_device *dev;
- struct ssb_driver *drv;
- int err = 0;
- int i;
- pm_message_t state = PMSG_FREEZE;
+ struct ssb_device *sdev;
+ struct ssb_driver *sdrv;
+ unsigned int i;
+
+ memset(ctx, 0, sizeof(*ctx));
+ ctx->bus = bus;
+ SSB_WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen));
- /* First check that we are capable to freeze all devices. */
for (i = 0; i < bus->nr_devices; i++) {
- dev = &(bus->devices[i]);
- if (!dev->dev ||
- !dev->dev->driver ||
- !device_is_registered(dev->dev))
- continue;
- drv = drv_to_ssb_drv(dev->dev->driver);
- if (!drv)
+ sdev = ssb_device_get(&bus->devices[i]);
+
+ if (!sdev->dev || !sdev->dev->driver ||
+ !device_is_registered(sdev->dev)) {
+ ssb_device_put(sdev);
continue;
- if (!drv->suspend) {
- /* Nope, can't suspend this one. */
- return -EOPNOTSUPP;
}
- }
- /* Now suspend all devices */
- for (i = 0; i < bus->nr_devices; i++) {
- dev = &(bus->devices[i]);
- if (!dev->dev ||
- !dev->dev->driver ||
- !device_is_registered(dev->dev))
+ sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver));
+ if (!sdrv || SSB_WARN_ON(!sdrv->remove)) {
+ ssb_device_put(sdev);
continue;
- drv = drv_to_ssb_drv(dev->dev->driver);
- if (!drv)
- continue;
- err = drv->suspend(dev, state);
- if (err) {
- ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n",
- dev_name(dev->dev));
- goto err_unwind;
}
+ sdrv->remove(sdev);
+ ctx->device_frozen[i] = 1;
}
return 0;
-err_unwind:
- for (i--; i >= 0; i--) {
- dev = &(bus->devices[i]);
- if (!dev->dev ||
- !dev->dev->driver ||
- !device_is_registered(dev->dev))
- continue;
- drv = drv_to_ssb_drv(dev->dev->driver);
- if (!drv)
- continue;
- if (drv->resume)
- drv->resume(dev);
- }
- return err;
}
-int ssb_devices_thaw(struct ssb_bus *bus)
+/** ssb_devices_thaw - Unfreeze all devices on the bus.
+ *
+ * This will re-attach the device drivers and re-init the devices.
+ *
+ * @ctx: The context structure from ssb_devices_freeze()
+ */
+int ssb_devices_thaw(struct ssb_freeze_context *ctx)
{
- struct ssb_device *dev;
- struct ssb_driver *drv;
- int err;
- int i;
+ struct ssb_bus *bus = ctx->bus;
+ struct ssb_device *sdev;
+ struct ssb_driver *sdrv;
+ unsigned int i;
+ int err, result = 0;
for (i = 0; i < bus->nr_devices; i++) {
- dev = &(bus->devices[i]);
- if (!dev->dev ||
- !dev->dev->driver ||
- !device_is_registered(dev->dev))
+ if (!ctx->device_frozen[i])
continue;
- drv = drv_to_ssb_drv(dev->dev->driver);
- if (!drv)
+ sdev = &bus->devices[i];
+
+ if (SSB_WARN_ON(!sdev->dev || !sdev->dev->driver))
continue;
- if (SSB_WARN_ON(!drv->resume))
+ sdrv = drv_to_ssb_drv(sdev->dev->driver);
+ if (SSB_WARN_ON(!sdrv || !sdrv->probe))
continue;
- err = drv->resume(dev);
+
+ err = sdrv->probe(sdev, &sdev->id);
if (err) {
ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
- dev_name(dev->dev));
+ dev_name(sdev->dev));
+ result = err;
}
+ ssb_driver_put(sdrv);
+ ssb_device_put(sdev);
}
- return 0;
+ return result;
}
#endif /* CONFIG_SSB_SPROM */
@@ -360,6 +385,35 @@ static int ssb_device_uevent(struct devi
ssb_dev->id.revision);
}
+#define ssb_config_attr(attrib, field, format_string) \
+static ssize_t \
+attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \
+}
+
+ssb_config_attr(core_num, core_index, "%u\n")
+ssb_config_attr(coreid, id.coreid, "0x%04x\n")
+ssb_config_attr(vendor, id.vendor, "0x%04x\n")
+ssb_config_attr(revision, id.revision, "%u\n")
+ssb_config_attr(irq, irq, "%u\n")
+static ssize_t
+name_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%s\n",
+ ssb_core_name(dev_to_ssb_dev(dev)->id.coreid));
+}
+
+static struct device_attribute ssb_device_attrs[] = {
+ __ATTR_RO(name),
+ __ATTR_RO(core_num),
+ __ATTR_RO(coreid),
+ __ATTR_RO(vendor),
+ __ATTR_RO(revision),
+ __ATTR_RO(irq),
+ __ATTR_NULL,
+};
+
static struct bus_type ssb_bustype = {
.name = "ssb",
.match = ssb_bus_match,
@@ -369,6 +423,7 @@ static struct bus_type ssb_bustype = {
.suspend = ssb_device_suspend,
.resume = ssb_device_resume,
.uevent = ssb_device_uevent,
+ .dev_attrs = ssb_device_attrs,
};
static void ssb_buses_lock(void)
@@ -461,6 +516,7 @@ static int ssb_devices_register(struct s
#ifdef CONFIG_SSB_PCIHOST
sdev->irq = bus->host_pci->irq;
dev->parent = &bus->host_pci->dev;
+ sdev->dma_dev = dev->parent;
#endif
break;
case SSB_BUSTYPE_PCMCIA:
@@ -469,8 +525,14 @@ static int ssb_devices_register(struct s
dev->parent = &bus->host_pcmcia->dev;
#endif
break;
+ case SSB_BUSTYPE_SDIO:
+#ifdef CONFIG_SSB_SDIOHOST
+ dev->parent = &bus->host_sdio->dev;
+#endif
+ break;
case SSB_BUSTYPE_SSB:
dev->dma_mask = &dev->coherent_dma_mask;
+ sdev->dma_dev = dev;
break;
}
@@ -724,12 +786,18 @@ static int ssb_bus_register(struct ssb_b
err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
if (err)
goto out;
+
+ /* Init SDIO-host device (if any), before the scan */
+ err = ssb_sdio_init(bus);
+ if (err)
+ goto err_disable_xtal;
+
ssb_buses_lock();
bus->busnumber = next_busnumber;
/* Scan for devices (cores) */
err = ssb_bus_scan(bus, baseaddr);
if (err)
- goto err_disable_xtal;
+ goto err_sdio_exit;
/* Init PCI-host device (if any) */
err = ssb_pci_init(bus);
@@ -776,6 +844,8 @@ err_pci_exit:
ssb_pci_exit(bus);
err_unmap:
ssb_iounmap(bus);
+err_sdio_exit:
+ ssb_sdio_exit(bus);
err_disable_xtal:
ssb_buses_unlock();
ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
@@ -796,6 +866,9 @@ int ssb_bus_pcibus_register(struct ssb_b
if (!err) {
ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
"PCI device %s\n", dev_name(&host_pci->dev));
+ } else {
+ ssb_printk(KERN_ERR PFX "Failed to register PCI version"
+ " of SSB with error %d\n", err);
}
return err;
@@ -825,6 +898,28 @@ int ssb_bus_pcmciabus_register(struct ss
EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
#endif /* CONFIG_SSB_PCMCIAHOST */
+#ifdef CONFIG_SSB_SDIOHOST
+int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func,
+ unsigned int quirks)
+{
+ int err;
+
+ bus->bustype = SSB_BUSTYPE_SDIO;
+ bus->host_sdio = func;
+ bus->ops = &ssb_sdio_ops;
+ bus->quirks = quirks;
+
+ err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
+ if (!err) {
+ ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+ "SDIO device %s\n", sdio_func_id(func));
+ }
+
+ return err;
+}
+EXPORT_SYMBOL(ssb_bus_sdiobus_register);
+#endif /* CONFIG_SSB_PCMCIAHOST */
+
int ssb_bus_ssbbus_register(struct ssb_bus *bus,
unsigned long baseaddr,
ssb_invariants_func_t get_invariants)
@@ -1099,10 +1194,10 @@ void ssb_device_enable(struct ssb_device
}
EXPORT_SYMBOL(ssb_device_enable);
-/* Wait for a bit in a register to get set or unset.
+/* Wait for bitmask in a register to get set or cleared.
* timeout is in units of ten-microseconds */
-static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask,
- int timeout, int set)
+static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask,
+ int timeout, int set)
{
int i;
u32 val;
@@ -1110,7 +1205,7 @@ static int ssb_wait_bit(struct ssb_devic
for (i = 0; i < timeout; i++) {
val = ssb_read32(dev, reg);
if (set) {
- if (val & bitmask)
+ if ((val & bitmask) == bitmask)
return 0;
} else {
if (!(val & bitmask))
@@ -1127,20 +1222,38 @@ static int ssb_wait_bit(struct ssb_devic
void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
{
- u32 reject;
+ u32 reject, val;
if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
return;
reject = ssb_tmslow_reject_bitmask(dev);
- ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
- ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1);
- ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
- ssb_write32(dev, SSB_TMSLOW,
- SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
- reject | SSB_TMSLOW_RESET |
- core_specific_flags);
- ssb_flush_tmslow(dev);
+
+ if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_CLOCK) {
+ ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
+ ssb_wait_bits(dev, SSB_TMSLOW, reject, 1000, 1);
+ ssb_wait_bits(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
+
+ if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
+ val = ssb_read32(dev, SSB_IMSTATE);
+ val |= SSB_IMSTATE_REJECT;
+ ssb_write32(dev, SSB_IMSTATE, val);
+ ssb_wait_bits(dev, SSB_IMSTATE, SSB_IMSTATE_BUSY, 1000,
+ 0);
+ }
+
+ ssb_write32(dev, SSB_TMSLOW,
+ SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
+ reject | SSB_TMSLOW_RESET |
+ core_specific_flags);
+ ssb_flush_tmslow(dev);
+
+ if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
+ val = ssb_read32(dev, SSB_IMSTATE);
+ val &= ~SSB_IMSTATE_REJECT;
+ ssb_write32(dev, SSB_IMSTATE, val);
+ }
+ }
ssb_write32(dev, SSB_TMSLOW,
reject | SSB_TMSLOW_RESET |
@@ -1358,8 +1471,10 @@ static int __init ssb_modinit(void)
ssb_buses_lock();
err = ssb_attach_queued_buses();
ssb_buses_unlock();
- if (err)
+ if (err) {
bus_unregister(&ssb_bustype);
+ goto out;
+ }
err = b43_pci_ssb_bridge_init();
if (err) {
@@ -1375,7 +1490,7 @@ static int __init ssb_modinit(void)
/* don't fail SSB init because of this */
err = 0;
}
-
+out:
return err;
}
/* ssb must be initialized after PCI but before the ssb drivers.
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -17,6 +17,7 @@
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_regs.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/delay.h>
@@ -167,10 +168,16 @@ err_pci:
}
/* Get the word-offset for a SSB_SPROM_XXX define. */
-#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16))
+#define SPOFF(offset) ((offset) / sizeof(u16))
/* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
-#define SPEX(_outvar, _offset, _mask, _shift) \
+#define SPEX16(_outvar, _offset, _mask, _shift) \
out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
+#define SPEX32(_outvar, _offset, _mask, _shift) \
+ out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \
+ in[SPOFF(_offset)]) & (_mask)) >> (_shift))
+#define SPEX(_outvar, _offset, _mask, _shift) \
+ SPEX16(_outvar, _offset, _mask, _shift)
+
static inline u8 ssb_crc8(u8 crc, u8 data)
{
@@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus
int i;
for (i = 0; i < bus->sprom_size; i++)
- sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2));
+ sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2));
return 0;
}
@@ -278,7 +285,7 @@ static int sprom_do_write(struct ssb_bus
ssb_printk("75%%");
else if (i % 2)
ssb_printk(".");
- writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2));
+ writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
mmiowb();
msleep(20);
}
@@ -399,6 +406,46 @@ static void sprom_extract_r123(struct ss
out->antenna_gain.ghz5.a3 = gain;
}
+/* Revs 4 5 and 8 have partially shared layout */
+static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in)
+{
+ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01,
+ SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT);
+ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01,
+ SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT);
+ SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23,
+ SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT);
+ SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23,
+ SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT);
+
+ SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01,
+ SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT);
+ SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01,
+ SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT);
+ SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23,
+ SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT);
+ SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23,
+ SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT);
+
+ SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01,
+ SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT);
+ SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01,
+ SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT);
+ SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23,
+ SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT);
+ SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23,
+ SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT);
+
+ SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01,
+ SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT);
+ SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01,
+ SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT);
+ SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23,
+ SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT);
+ SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23,
+ SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT);
+}
+
static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
{
int i;
@@ -421,10 +468,14 @@ static void sprom_extract_r45(struct ssb
SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
+ SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
+ SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
} else {
SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0);
SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
+ SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
+ SPEX(boardflags2_hi, SSB_SPROM5_BFL2HI, 0xFFFF, 0);
}
SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
SSB_SPROM4_ANTAVAIL_A_SHIFT);
@@ -464,6 +515,8 @@ static void sprom_extract_r45(struct ssb
memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
sizeof(out->antenna_gain.ghz5));
+ sprom_extract_r458(out, in);
+
/* TODO - get remaining rev 4 stuff needed */
}
@@ -474,12 +527,14 @@ static void sprom_extract_r8(struct ssb_
/* extract the MAC address */
for (i = 0; i < 3; i++) {
- v = in[SPOFF(SSB_SPROM1_IL0MAC) + i];
+ v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
}
SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
+ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
+ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0);
SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
SSB_SPROM8_ANTAVAIL_A_SHIFT);
SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
@@ -490,12 +545,55 @@ static void sprom_extract_r8(struct ssb_
SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
SSB_SPROM8_ITSSI_A_SHIFT);
+ SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
+ SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
+ SSB_SPROM8_MAXP_AL_SHIFT);
SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
SSB_SPROM8_GPIOA_P1_SHIFT);
SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
SSB_SPROM8_GPIOB_P3_SHIFT);
+ SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
+ SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
+ SSB_SPROM8_TRI5G_SHIFT);
+ SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
+ SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
+ SSB_SPROM8_TRI5GH_SHIFT);
+ SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0);
+ SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
+ SSB_SPROM8_RXPO5G_SHIFT);
+ SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
+ SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
+ SSB_SPROM8_RSSISMC2G_SHIFT);
+ SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
+ SSB_SPROM8_RSSISAV2G_SHIFT);
+ SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
+ SSB_SPROM8_BXA2G_SHIFT);
+ SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
+ SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
+ SSB_SPROM8_RSSISMC5G_SHIFT);
+ SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
+ SSB_SPROM8_RSSISAV5G_SHIFT);
+ SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
+ SSB_SPROM8_BXA5G_SHIFT);
+ SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0);
+ SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0);
+ SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0);
+ SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0);
+ SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0);
+ SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0);
+ SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0);
+ SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0);
+ SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0);
+ SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0);
+ SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0);
+ SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0);
+ SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0);
+ SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0);
+ SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0);
+ SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0);
+ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
/* Extract the antenna gain values. */
SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
@@ -509,6 +607,8 @@ static void sprom_extract_r8(struct ssb_
memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
sizeof(out->antenna_gain.ghz5));
+ sprom_extract_r458(out, in);
+
/* TODO - get remaining rev 8 stuff needed */
}
@@ -521,36 +621,34 @@ static int sprom_extract(struct ssb_bus
ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
memset(out->et1mac, 0xFF, 6);
+
if ((bus->chip_id & 0xFF00) == 0x4400) {
/* Workaround: The BCM44XX chip has a stupid revision
* number stored in the SPROM.
* Always extract r1. */
out->revision = 1;
+ ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
+ }
+
+ switch (out->revision) {
+ case 1:
+ case 2:
+ case 3:
sprom_extract_r123(out, in);
- } else if (bus->chip_id == 0x4321) {
- /* the BCM4328 has a chipid == 0x4321 and a rev 4 SPROM */
- out->revision = 4;
+ break;
+ case 4:
+ case 5:
sprom_extract_r45(out, in);
- } else {
- switch (out->revision) {
- case 1:
- case 2:
- case 3:
- sprom_extract_r123(out, in);
- break;
- case 4:
- case 5:
- sprom_extract_r45(out, in);
- break;
- case 8:
- sprom_extract_r8(out, in);
- break;
- default:
- ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
- " revision %d detected. Will extract"
- " v1\n", out->revision);
- sprom_extract_r123(out, in);
- }
+ break;
+ case 8:
+ sprom_extract_r8(out, in);
+ break;
+ default:
+ ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
+ " revision %d detected. Will extract"
+ " v1\n", out->revision);
+ out->revision = 1;
+ sprom_extract_r123(out, in);
}
if (out->boardflags_lo == 0xFFFF)
@@ -565,12 +663,34 @@ static int ssb_pci_sprom_get(struct ssb_
struct ssb_sprom *sprom)
{
const struct ssb_sprom *fallback;
- int err = -ENOMEM;
+ int err;
u16 *buf;
+ if (!ssb_is_sprom_available(bus)) {
+ ssb_printk(KERN_ERR PFX "No SPROM available!\n");
+ return -ENODEV;
+ }
+ if (bus->chipco.dev) { /* can be unavailible! */
+ /*
+ * get SPROM offset: SSB_SPROM_BASE1 except for
+ * chipcommon rev >= 31 or chip ID is 0x4312 and
+ * chipcommon status & 3 == 2
+ */
+ if (bus->chipco.dev->id.revision >= 31)
+ bus->sprom_offset = SSB_SPROM_BASE31;
+ else if (bus->chip_id == 0x4312 &&
+ (bus->chipco.status & 0x03) == 2)
+ bus->sprom_offset = SSB_SPROM_BASE31;
+ else
+ bus->sprom_offset = SSB_SPROM_BASE1;
+ } else {
+ bus->sprom_offset = SSB_SPROM_BASE1;
+ }
+ ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
+
buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
if (!buf)
- goto out;
+ return -ENOMEM;
bus->sprom_size = SSB_SPROMSIZE_WORDS_R123;
sprom_do_read(bus, buf);
err = sprom_check_crc(buf, bus->sprom_size);
@@ -580,7 +700,7 @@ static int ssb_pci_sprom_get(struct ssb_
buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
GFP_KERNEL);
if (!buf)
- goto out;
+ return -ENOMEM;
bus->sprom_size = SSB_SPROMSIZE_WORDS_R4;
sprom_do_read(bus, buf);
err = sprom_check_crc(buf, bus->sprom_size);
@@ -602,7 +722,6 @@ static int ssb_pci_sprom_get(struct ssb_
out_free:
kfree(buf);
-out:
return err;
}
--- a/drivers/ssb/pcihost_wrapper.c
+++ b/drivers/ssb/pcihost_wrapper.c
@@ -12,6 +12,7 @@
*/
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/ssb/ssb.h>
@@ -58,6 +59,7 @@ static int ssb_pcihost_probe(struct pci_
struct ssb_bus *ssb;
int err = -ENOMEM;
const char *name;
+ u32 val;
ssb = kzalloc(sizeof(*ssb), GFP_KERNEL);
if (!ssb)
@@ -73,6 +75,12 @@ static int ssb_pcihost_probe(struct pci_
goto err_pci_disable;
pci_set_master(dev);
+ /* Disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state */
+ pci_read_config_dword(dev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(dev, 0x40, val & 0xffff00ff);
+
err = ssb_bus_pcibus_register(ssb, dev);
if (err)
goto err_pci_release_regions;
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -583,7 +583,7 @@ static int ssb_pcmcia_sprom_write_all(st
ssb_printk(".");
err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
if (err) {
- ssb_printk("\n" KERN_NOTICE PFX
+ ssb_printk(KERN_NOTICE PFX
"Failed to write to SPROM.\n");
failed = 1;
break;
@@ -591,7 +591,7 @@ static int ssb_pcmcia_sprom_write_all(st
}
err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
if (err) {
- ssb_printk("\n" KERN_NOTICE PFX
+ ssb_printk(KERN_NOTICE PFX
"Could not disable SPROM write access.\n");
failed = 1;
}
@@ -617,134 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co
} \
} while (0)
-int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
- struct ssb_init_invariants *iv)
+static int ssb_pcmcia_get_mac(struct pcmcia_device *p_dev,
+ tuple_t *tuple,
+ void *priv)
{
- tuple_t tuple;
- int res;
- unsigned char buf[32];
+ struct ssb_sprom *sprom = priv;
+
+ if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID)
+ return -EINVAL;
+ if (tuple->TupleDataLen != ETH_ALEN + 2)
+ return -EINVAL;
+ if (tuple->TupleData[1] != ETH_ALEN)
+ return -EINVAL;
+ memcpy(sprom->il0mac, &tuple->TupleData[2], ETH_ALEN);
+ return 0;
+};
+
+static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev,
+ tuple_t *tuple,
+ void *priv)
+{
+ struct ssb_init_invariants *iv = priv;
struct ssb_sprom *sprom = &iv->sprom;
struct ssb_boardinfo *bi = &iv->boardinfo;
const char *error_description;
+ GOTO_ERROR_ON(tuple->TupleDataLen < 1, "VEN tpl < 1");
+ switch (tuple->TupleData[0]) {
+ case SSB_PCMCIA_CIS_ID:
+ GOTO_ERROR_ON((tuple->TupleDataLen != 5) &&
+ (tuple->TupleDataLen != 7),
+ "id tpl size");
+ bi->vendor = tuple->TupleData[1] |
+ ((u16)tuple->TupleData[2] << 8);
+ break;
+ case SSB_PCMCIA_CIS_BOARDREV:
+ GOTO_ERROR_ON(tuple->TupleDataLen != 2,
+ "boardrev tpl size");
+ sprom->board_rev = tuple->TupleData[1];
+ break;
+ case SSB_PCMCIA_CIS_PA:
+ GOTO_ERROR_ON((tuple->TupleDataLen != 9) &&
+ (tuple->TupleDataLen != 10),
+ "pa tpl size");
+ sprom->pa0b0 = tuple->TupleData[1] |
+ ((u16)tuple->TupleData[2] << 8);
+ sprom->pa0b1 = tuple->TupleData[3] |
+ ((u16)tuple->TupleData[4] << 8);
+ sprom->pa0b2 = tuple->TupleData[5] |
+ ((u16)tuple->TupleData[6] << 8);
+ sprom->itssi_a = tuple->TupleData[7];
+ sprom->itssi_bg = tuple->TupleData[7];
+ sprom->maxpwr_a = tuple->TupleData[8];
+ sprom->maxpwr_bg = tuple->TupleData[8];
+ break;
+ case SSB_PCMCIA_CIS_OEMNAME:
+ /* We ignore this. */
+ break;
+ case SSB_PCMCIA_CIS_CCODE:
+ GOTO_ERROR_ON(tuple->TupleDataLen != 2,
+ "ccode tpl size");
+ sprom->country_code = tuple->TupleData[1];
+ break;
+ case SSB_PCMCIA_CIS_ANTENNA:
+ GOTO_ERROR_ON(tuple->TupleDataLen != 2,
+ "ant tpl size");
+ sprom->ant_available_a = tuple->TupleData[1];
+ sprom->ant_available_bg = tuple->TupleData[1];
+ break;
+ case SSB_PCMCIA_CIS_ANTGAIN:
+ GOTO_ERROR_ON(tuple->TupleDataLen != 2,
+ "antg tpl size");
+ sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1];
+ sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1];
+ sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1];
+ sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1];
+ sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1];
+ sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1];
+ sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1];
+ sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1];
+ break;
+ case SSB_PCMCIA_CIS_BFLAGS:
+ GOTO_ERROR_ON((tuple->TupleDataLen != 3) &&
+ (tuple->TupleDataLen != 5),
+ "bfl tpl size");
+ sprom->boardflags_lo = tuple->TupleData[1] |
+ ((u16)tuple->TupleData[2] << 8);
+ break;
+ case SSB_PCMCIA_CIS_LEDS:
+ GOTO_ERROR_ON(tuple->TupleDataLen != 5,
+ "leds tpl size");
+ sprom->gpio0 = tuple->TupleData[1];
+ sprom->gpio1 = tuple->TupleData[2];
+ sprom->gpio2 = tuple->TupleData[3];
+ sprom->gpio3 = tuple->TupleData[4];
+ break;
+ }
+ return -ENOSPC; /* continue with next entry */
+
+error:
+ ssb_printk(KERN_ERR PFX
+ "PCMCIA: Failed to fetch device invariants: %s\n",
+ error_description);
+ return -ENODEV;
+}
+
+
+int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
+ struct ssb_init_invariants *iv)
+{
+ struct ssb_sprom *sprom = &iv->sprom;
+ int res;
+
memset(sprom, 0xFF, sizeof(*sprom));
sprom->revision = 1;
sprom->boardflags_lo = 0;
sprom->boardflags_hi = 0;
/* First fetch the MAC address. */
- memset(&tuple, 0, sizeof(tuple));
- tuple.DesiredTuple = CISTPL_FUNCE;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
- GOTO_ERROR_ON(res != 0, "MAC first tpl");
- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
- GOTO_ERROR_ON(res != 0, "MAC first tpl data");
- while (1) {
- GOTO_ERROR_ON(tuple.TupleDataLen < 1, "MAC tpl < 1");
- if (tuple.TupleData[0] == CISTPL_FUNCE_LAN_NODE_ID)
- break;
- res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
- GOTO_ERROR_ON(res != 0, "MAC next tpl");
- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
- GOTO_ERROR_ON(res != 0, "MAC next tpl data");
+ res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
+ ssb_pcmcia_get_mac, sprom);
+ if (res != 0) {
+ ssb_printk(KERN_ERR PFX
+ "PCMCIA: Failed to fetch MAC address\n");
+ return -ENODEV;
}
- GOTO_ERROR_ON(tuple.TupleDataLen != ETH_ALEN + 2, "MAC tpl size");
- memcpy(sprom->il0mac, &tuple.TupleData[2], ETH_ALEN);
/* Fetch the vendor specific tuples. */
- memset(&tuple, 0, sizeof(tuple));
- tuple.DesiredTuple = SSB_PCMCIA_CIS;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
- GOTO_ERROR_ON(res != 0, "VEN first tpl");
- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
- GOTO_ERROR_ON(res != 0, "VEN first tpl data");
- while (1) {
- GOTO_ERROR_ON(tuple.TupleDataLen < 1, "VEN tpl < 1");
- switch (tuple.TupleData[0]) {
- case SSB_PCMCIA_CIS_ID:
- GOTO_ERROR_ON((tuple.TupleDataLen != 5) &&
- (tuple.TupleDataLen != 7),
- "id tpl size");
- bi->vendor = tuple.TupleData[1] |
- ((u16)tuple.TupleData[2] << 8);
- break;
- case SSB_PCMCIA_CIS_BOARDREV:
- GOTO_ERROR_ON(tuple.TupleDataLen != 2,
- "boardrev tpl size");
- sprom->board_rev = tuple.TupleData[1];
- break;
- case SSB_PCMCIA_CIS_PA:
- GOTO_ERROR_ON(tuple.TupleDataLen != 9,
- "pa tpl size");
- sprom->pa0b0 = tuple.TupleData[1] |
- ((u16)tuple.TupleData[2] << 8);
- sprom->pa0b1 = tuple.TupleData[3] |
- ((u16)tuple.TupleData[4] << 8);
- sprom->pa0b2 = tuple.TupleData[5] |
- ((u16)tuple.TupleData[6] << 8);
- sprom->itssi_a = tuple.TupleData[7];
- sprom->itssi_bg = tuple.TupleData[7];
- sprom->maxpwr_a = tuple.TupleData[8];
- sprom->maxpwr_bg = tuple.TupleData[8];
- break;
- case SSB_PCMCIA_CIS_OEMNAME:
- /* We ignore this. */
- break;
- case SSB_PCMCIA_CIS_CCODE:
- GOTO_ERROR_ON(tuple.TupleDataLen != 2,
- "ccode tpl size");
- sprom->country_code = tuple.TupleData[1];
- break;
- case SSB_PCMCIA_CIS_ANTENNA:
- GOTO_ERROR_ON(tuple.TupleDataLen != 2,
- "ant tpl size");
- sprom->ant_available_a = tuple.TupleData[1];
- sprom->ant_available_bg = tuple.TupleData[1];
- break;
- case SSB_PCMCIA_CIS_ANTGAIN:
- GOTO_ERROR_ON(tuple.TupleDataLen != 2,
- "antg tpl size");
- sprom->antenna_gain.ghz24.a0 = tuple.TupleData[1];
- sprom->antenna_gain.ghz24.a1 = tuple.TupleData[1];
- sprom->antenna_gain.ghz24.a2 = tuple.TupleData[1];
- sprom->antenna_gain.ghz24.a3 = tuple.TupleData[1];
- sprom->antenna_gain.ghz5.a0 = tuple.TupleData[1];
- sprom->antenna_gain.ghz5.a1 = tuple.TupleData[1];
- sprom->antenna_gain.ghz5.a2 = tuple.TupleData[1];
- sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1];
- break;
- case SSB_PCMCIA_CIS_BFLAGS:
- GOTO_ERROR_ON(tuple.TupleDataLen != 3,
- "bfl tpl size");
- sprom->boardflags_lo = tuple.TupleData[1] |
- ((u16)tuple.TupleData[2] << 8);
- break;
- case SSB_PCMCIA_CIS_LEDS:
- GOTO_ERROR_ON(tuple.TupleDataLen != 5,
- "leds tpl size");
- sprom->gpio0 = tuple.TupleData[1];
- sprom->gpio1 = tuple.TupleData[2];
- sprom->gpio2 = tuple.TupleData[3];
- sprom->gpio3 = tuple.TupleData[4];
- break;
- }
- res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
- if (res == -ENOSPC)
- break;
- GOTO_ERROR_ON(res != 0, "VEN next tpl");
- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
- GOTO_ERROR_ON(res != 0, "VEN next tpl data");
- }
+ res = pcmcia_loop_tuple(bus->host_pcmcia, SSB_PCMCIA_CIS,
+ ssb_pcmcia_do_get_invariants, iv);
+ if ((res == 0) || (res == -ENOSPC))
+ return 0;
- return 0;
-error:
ssb_printk(KERN_ERR PFX
- "PCMCIA: Failed to fetch device invariants: %s\n",
- error_description);
+ "PCMCIA: Failed to fetch device invariants\n");
return -ENODEV;
}
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -162,6 +162,8 @@ static u8 chipid_to_nrcores(u16 chipid)
static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx,
u16 offset)
{
+ u32 lo, hi;
+
switch (bus->bustype) {
case SSB_BUSTYPE_SSB:
offset += current_coreidx * SSB_CORE_SIZE;
@@ -174,7 +176,12 @@ static u32 scan_read32(struct ssb_bus *b
offset -= 0x800;
} else
ssb_pcmcia_switch_segment(bus, 0);
- break;
+ lo = readw(bus->mmio + offset);
+ hi = readw(bus->mmio + offset + 2);
+ return lo | (hi << 16);
+ case SSB_BUSTYPE_SDIO:
+ offset += current_coreidx * SSB_CORE_SIZE;
+ return ssb_sdio_scan_read32(bus, offset);
}
return readl(bus->mmio + offset);
}
@@ -188,6 +195,8 @@ static int scan_switchcore(struct ssb_bu
return ssb_pci_switch_coreidx(bus, coreidx);
case SSB_BUSTYPE_PCMCIA:
return ssb_pcmcia_switch_coreidx(bus, coreidx);
+ case SSB_BUSTYPE_SDIO:
+ return ssb_sdio_scan_switch_coreidx(bus, coreidx);
}
return 0;
}
@@ -206,6 +215,8 @@ void ssb_iounmap(struct ssb_bus *bus)
SSB_BUG_ON(1); /* Can't reach this code. */
#endif
break;
+ case SSB_BUSTYPE_SDIO:
+ break;
}
bus->mmio = NULL;
bus->mapped_device = NULL;
@@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct
SSB_BUG_ON(1); /* Can't reach this code. */
#endif
break;
+ case SSB_BUSTYPE_SDIO:
+ /* Nothing to ioremap in the SDIO case, just fake it */
+ mmio = (void __iomem *)baseaddr;
+ break;
}
return mmio;
@@ -339,7 +354,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
dev->bus = bus;
dev->ops = bus->ops;
- ssb_dprintk(KERN_INFO PFX
+ printk(KERN_DEBUG PFX
"Core %d found: %s "
"(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n",
i, ssb_core_name(dev->id.coreid),
@@ -407,6 +422,16 @@ int ssb_bus_scan(struct ssb_bus *bus,
bus->pcicore.dev = dev;
#endif /* CONFIG_SSB_DRIVER_PCICORE */
break;
+ case SSB_DEV_ETHERNET:
+ if (bus->bustype == SSB_BUSTYPE_PCI) {
+ if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
+ (bus->host_pci->device & 0xFF00) == 0x4300) {
+ /* This is a dangling ethernet core on a
+ * wireless device. Ignore it. */
+ continue;
+ }
+ }
+ break;
default:
break;
}
--- /dev/null
+++ b/drivers/ssb/sdio.c
@@ -0,0 +1,610 @@
+/*
+ * Sonics Silicon Backplane
+ * SDIO-Hostbus related functions
+ *
+ * Copyright 2009 Albert Herranz <albert_herranz@yahoo.es>
+ *
+ * Based on drivers/ssb/pcmcia.c
+ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ *
+ */
+
+#include <linux/ssb/ssb.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/etherdevice.h>
+#include <linux/mmc/sdio_func.h>
+
+#include "ssb_private.h"
+
+/* Define the following to 1 to enable a printk on each coreswitch. */
+#define SSB_VERBOSE_SDIOCORESWITCH_DEBUG 0
+
+
+/* Hardware invariants CIS tuples */
+#define SSB_SDIO_CIS 0x80
+#define SSB_SDIO_CIS_SROMREV 0x00
+#define SSB_SDIO_CIS_ID 0x01
+#define SSB_SDIO_CIS_BOARDREV 0x02
+#define SSB_SDIO_CIS_PA 0x03
+#define SSB_SDIO_CIS_PA_PA0B0_LO 0
+#define SSB_SDIO_CIS_PA_PA0B0_HI 1
+#define SSB_SDIO_CIS_PA_PA0B1_LO 2
+#define SSB_SDIO_CIS_PA_PA0B1_HI 3
+#define SSB_SDIO_CIS_PA_PA0B2_LO 4
+#define SSB_SDIO_CIS_PA_PA0B2_HI 5
+#define SSB_SDIO_CIS_PA_ITSSI 6
+#define SSB_SDIO_CIS_PA_MAXPOW 7
+#define SSB_SDIO_CIS_OEMNAME 0x04
+#define SSB_SDIO_CIS_CCODE 0x05
+#define SSB_SDIO_CIS_ANTENNA 0x06
+#define SSB_SDIO_CIS_ANTGAIN 0x07
+#define SSB_SDIO_CIS_BFLAGS 0x08
+#define SSB_SDIO_CIS_LEDS 0x09
+
+#define CISTPL_FUNCE_LAN_NODE_ID 0x04 /* same as in PCMCIA */
+
+
+/*
+ * Function 1 miscellaneous registers.
+ *
+ * Definitions match src/include/sbsdio.h from the
+ * Android Open Source Project
+ * http://android.git.kernel.org/?p=platform/system/wlan/broadcom.git
+ *
+ */
+#define SBSDIO_FUNC1_SBADDRLOW 0x1000a /* SB Address window Low (b15) */
+#define SBSDIO_FUNC1_SBADDRMID 0x1000b /* SB Address window Mid (b23-b16) */
+#define SBSDIO_FUNC1_SBADDRHIGH 0x1000c /* SB Address window High (b24-b31) */
+
+/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
+#define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid address bits in SBADDRLOW */
+#define SBSDIO_SBADDRMID_MASK 0xff /* Valid address bits in SBADDRMID */
+#define SBSDIO_SBADDRHIGH_MASK 0xff /* Valid address bits in SBADDRHIGH */
+
+#define SBSDIO_SB_OFT_ADDR_MASK 0x7FFF /* sb offset addr is <= 15 bits, 32k */
+
+/* REVISIT: this flag doesn't seem to matter */
+#define SBSDIO_SB_ACCESS_2_4B_FLAG 0x8000 /* forces 32-bit SB access */
+
+
+/*
+ * Address map within the SDIO function address space (128K).
+ *
+ * Start End Description
+ * ------- ------- ------------------------------------------
+ * 0x00000 0x0ffff selected backplane address window (64K)
+ * 0x10000 0x1ffff backplane control registers (max 64K)
+ *
+ * The current address window is configured by writing to registers
+ * SBADDRLOW, SBADDRMID and SBADDRHIGH.
+ *
+ * In order to access the contents of a 32-bit Silicon Backplane address
+ * the backplane address window must be first loaded with the highest
+ * 16 bits of the target address. Then, an access must be done to the
+ * SDIO function address space using the lower 15 bits of the address.
+ * Bit 15 of the address must be set when doing 32 bit accesses.
+ *
+ * 10987654321098765432109876543210
+ * WWWWWWWWWWWWWWWWW SB Address Window
+ * OOOOOOOOOOOOOOOO Offset within SB Address Window
+ * a 32-bit access flag
+ */
+
+
+/*
+ * SSB I/O via SDIO.
+ *
+ * NOTE: SDIO address @addr is 17 bits long (SDIO address space is 128K).
+ */
+
+static inline struct device *ssb_sdio_dev(struct ssb_bus *bus)
+{
+ return &bus->host_sdio->dev;
+}
+
+/* host claimed */
+static int ssb_sdio_writeb(struct ssb_bus *bus, unsigned int addr, u8 val)
+{
+ int error = 0;
+
+ sdio_writeb(bus->host_sdio, val, addr, &error);
+ if (unlikely(error)) {
+ dev_dbg(ssb_sdio_dev(bus), "%08X <- %02x, error %d\n",
+ addr, val, error);
+ }
+
+ return error;
+}
+
+#if 0
+static u8 ssb_sdio_readb(struct ssb_bus *bus, unsigned int addr)
+{
+ u8 val;
+ int error = 0;
+
+ val = sdio_readb(bus->host_sdio, addr, &error);
+ if (unlikely(error)) {
+ dev_dbg(ssb_sdio_dev(bus), "%08X -> %02x, error %d\n",
+ addr, val, error);
+ }
+
+ return val;
+}
+#endif
+
+/* host claimed */
+static int ssb_sdio_set_sbaddr_window(struct ssb_bus *bus, u32 address)
+{
+ int error;
+
+ error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRLOW,
+ (address >> 8) & SBSDIO_SBADDRLOW_MASK);
+ if (error)
+ goto out;
+ error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRMID,
+ (address >> 16) & SBSDIO_SBADDRMID_MASK);
+ if (error)
+ goto out;
+ error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRHIGH,
+ (address >> 24) & SBSDIO_SBADDRHIGH_MASK);
+ if (error)
+ goto out;
+ bus->sdio_sbaddr = address;
+out:
+ if (error) {
+ dev_dbg(ssb_sdio_dev(bus), "failed to set address window"
+ " to 0x%08x, error %d\n", address, error);
+ }
+
+ return error;
+}
+
+/* for enumeration use only */
+u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset)
+{
+ u32 val;
+ int error;
+
+ sdio_claim_host(bus->host_sdio);
+ val = sdio_readl(bus->host_sdio, offset, &error);
+ sdio_release_host(bus->host_sdio);
+ if (unlikely(error)) {
+ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
+ bus->sdio_sbaddr >> 16, offset, val, error);
+ }
+
+ return val;
+}
+
+/* for enumeration use only */
+int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
+{
+ u32 sbaddr;
+ int error;
+
+ sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
+ sdio_claim_host(bus->host_sdio);
+ error = ssb_sdio_set_sbaddr_window(bus, sbaddr);
+ sdio_release_host(bus->host_sdio);
+ if (error) {
+ dev_err(ssb_sdio_dev(bus), "failed to switch to core %u,"
+ " error %d\n", coreidx, error);
+ goto out;
+ }
+out:
+ return error;
+}
+
+/* host must be already claimed */
+int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev)
+{
+ u8 coreidx = dev->core_index;
+ u32 sbaddr;
+ int error = 0;
+
+ sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
+ if (unlikely(bus->sdio_sbaddr != sbaddr)) {
+#if SSB_VERBOSE_SDIOCORESWITCH_DEBUG
+ dev_info(ssb_sdio_dev(bus),
+ "switching to %s core, index %d\n",
+ ssb_core_name(dev->id.coreid), coreidx);
+#endif
+ error = ssb_sdio_set_sbaddr_window(bus, sbaddr);
+ if (error) {
+ dev_dbg(ssb_sdio_dev(bus), "failed to switch to"
+ " core %u, error %d\n", coreidx, error);
+ goto out;
+ }
+ bus->mapped_device = dev;
+ }
+
+out:
+ return error;
+}
+
+static u8 ssb_sdio_read8(struct ssb_device *dev, u16 offset)
+{
+ struct ssb_bus *bus = dev->bus;
+ u8 val = 0xff;
+ int error = 0;
+
+ sdio_claim_host(bus->host_sdio);
+ if (unlikely(ssb_sdio_switch_core(bus, dev)))
+ goto out;
+ offset |= bus->sdio_sbaddr & 0xffff;
+ offset &= SBSDIO_SB_OFT_ADDR_MASK;
+ val = sdio_readb(bus->host_sdio, offset, &error);
+ if (error) {
+ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %02x, error %d\n",
+ bus->sdio_sbaddr >> 16, offset, val, error);
+ }
+out:
+ sdio_release_host(bus->host_sdio);
+
+ return val;
+}
+
+static u16 ssb_sdio_read16(struct ssb_device *dev, u16 offset)
+{
+ struct ssb_bus *bus = dev->bus;
+ u16 val = 0xffff;
+ int error = 0;
+
+ sdio_claim_host(bus->host_sdio);
+ if (unlikely(ssb_sdio_switch_core(bus, dev)))
+ goto out;
+ offset |= bus->sdio_sbaddr & 0xffff;
+ offset &= SBSDIO_SB_OFT_ADDR_MASK;
+ val = sdio_readw(bus->host_sdio, offset, &error);
+ if (error) {
+ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %04x, error %d\n",
+ bus->sdio_sbaddr >> 16, offset, val, error);
+ }
+out:
+ sdio_release_host(bus->host_sdio);
+
+ return val;
+}
+
+static u32 ssb_sdio_read32(struct ssb_device *dev, u16 offset)
+{
+ struct ssb_bus *bus = dev->bus;
+ u32 val = 0xffffffff;
+ int error = 0;
+
+ sdio_claim_host(bus->host_sdio);
+ if (unlikely(ssb_sdio_switch_core(bus, dev)))
+ goto out;
+ offset |= bus->sdio_sbaddr & 0xffff;
+ offset &= SBSDIO_SB_OFT_ADDR_MASK;
+ offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
+ val = sdio_readl(bus->host_sdio, offset, &error);
+ if (error) {
+ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
+ bus->sdio_sbaddr >> 16, offset, val, error);
+ }
+out:
+ sdio_release_host(bus->host_sdio);
+
+ return val;
+}
+
+#ifdef CONFIG_SSB_BLOCKIO
+static void ssb_sdio_block_read(struct ssb_device *dev, void *buffer,
+ size_t count, u16 offset, u8 reg_width)
+{
+ size_t saved_count = count;
+ struct ssb_bus *bus = dev->bus;
+ int error = 0;
+
+ sdio_claim_host(bus->host_sdio);
+ if (unlikely(ssb_sdio_switch_core(bus, dev))) {
+ error = -EIO;
+ memset(buffer, 0xff, count);
+ goto err_out;
+ }
+ offset |= bus->sdio_sbaddr & 0xffff;
+ offset &= SBSDIO_SB_OFT_ADDR_MASK;
+
+ switch (reg_width) {
+ case sizeof(u8): {
+ error = sdio_readsb(bus->host_sdio, buffer, offset, count);
+ break;
+ }
+ case sizeof(u16): {
+ SSB_WARN_ON(count & 1);
+ error = sdio_readsb(bus->host_sdio, buffer, offset, count);
+ break;
+ }
+ case sizeof(u32): {
+ SSB_WARN_ON(count & 3);
+ offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
+ error = sdio_readsb(bus->host_sdio, buffer, offset, count);
+ break;
+ }
+ default:
+ SSB_WARN_ON(1);
+ }
+ if (!error)
+ goto out;
+
+err_out:
+ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n",
+ bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
+out:
+ sdio_release_host(bus->host_sdio);
+}
+#endif /* CONFIG_SSB_BLOCKIO */
+
+static void ssb_sdio_write8(struct ssb_device *dev, u16 offset, u8 val)
+{
+ struct ssb_bus *bus = dev->bus;
+ int error = 0;
+
+ sdio_claim_host(bus->host_sdio);
+ if (unlikely(ssb_sdio_switch_core(bus, dev)))
+ goto out;
+ offset |= bus->sdio_sbaddr & 0xffff;
+ offset &= SBSDIO_SB_OFT_ADDR_MASK;
+ sdio_writeb(bus->host_sdio, val, offset, &error);
+ if (error) {
+ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %02x, error %d\n",
+ bus->sdio_sbaddr >> 16, offset, val, error);
+ }
+out:
+ sdio_release_host(bus->host_sdio);
+}
+
+static void ssb_sdio_write16(struct ssb_device *dev, u16 offset, u16 val)
+{
+ struct ssb_bus *bus = dev->bus;
+ int error = 0;
+
+ sdio_claim_host(bus->host_sdio);
+ if (unlikely(ssb_sdio_switch_core(bus, dev)))
+ goto out;
+ offset |= bus->sdio_sbaddr & 0xffff;
+ offset &= SBSDIO_SB_OFT_ADDR_MASK;
+ sdio_writew(bus->host_sdio, val, offset, &error);
+ if (error) {
+ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %04x, error %d\n",
+ bus->sdio_sbaddr >> 16, offset, val, error);
+ }
+out:
+ sdio_release_host(bus->host_sdio);
+}
+
+static void ssb_sdio_write32(struct ssb_device *dev, u16 offset, u32 val)
+{
+ struct ssb_bus *bus = dev->bus;
+ int error = 0;
+
+ sdio_claim_host(bus->host_sdio);
+ if (unlikely(ssb_sdio_switch_core(bus, dev)))
+ goto out;
+ offset |= bus->sdio_sbaddr & 0xffff;
+ offset &= SBSDIO_SB_OFT_ADDR_MASK;
+ offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
+ sdio_writel(bus->host_sdio, val, offset, &error);
+ if (error) {
+ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %08x, error %d\n",
+ bus->sdio_sbaddr >> 16, offset, val, error);
+ }
+ if (bus->quirks & SSB_QUIRK_SDIO_READ_AFTER_WRITE32)
+ sdio_readl(bus->host_sdio, 0, &error);
+out:
+ sdio_release_host(bus->host_sdio);
+}
+
+#ifdef CONFIG_SSB_BLOCKIO
+static void ssb_sdio_block_write(struct ssb_device *dev, const void *buffer,
+ size_t count, u16 offset, u8 reg_width)
+{
+ size_t saved_count = count;
+ struct ssb_bus *bus = dev->bus;
+ int error = 0;
+
+ sdio_claim_host(bus->host_sdio);
+ if (unlikely(ssb_sdio_switch_core(bus, dev))) {
+ error = -EIO;
+ memset((void *)buffer, 0xff, count);
+ goto err_out;
+ }
+ offset |= bus->sdio_sbaddr & 0xffff;
+ offset &= SBSDIO_SB_OFT_ADDR_MASK;
+
+ switch (reg_width) {
+ case sizeof(u8):
+ error = sdio_writesb(bus->host_sdio, offset,
+ (void *)buffer, count);
+ break;
+ case sizeof(u16):
+ SSB_WARN_ON(count & 1);
+ error = sdio_writesb(bus->host_sdio, offset,
+ (void *)buffer, count);
+ break;
+ case sizeof(u32):
+ SSB_WARN_ON(count & 3);
+ offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
+ error = sdio_writesb(bus->host_sdio, offset,
+ (void *)buffer, count);
+ break;
+ default:
+ SSB_WARN_ON(1);
+ }
+ if (!error)
+ goto out;
+
+err_out:
+ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n",
+ bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
+out:
+ sdio_release_host(bus->host_sdio);
+}
+
+#endif /* CONFIG_SSB_BLOCKIO */
+
+/* Not "static", as it's used in main.c */
+const struct ssb_bus_ops ssb_sdio_ops = {
+ .read8 = ssb_sdio_read8,
+ .read16 = ssb_sdio_read16,
+ .read32 = ssb_sdio_read32,
+ .write8 = ssb_sdio_write8,
+ .write16 = ssb_sdio_write16,
+ .write32 = ssb_sdio_write32,
+#ifdef CONFIG_SSB_BLOCKIO
+ .block_read = ssb_sdio_block_read,
+ .block_write = ssb_sdio_block_write,
+#endif
+};
+
+#define GOTO_ERROR_ON(condition, description) do { \
+ if (unlikely(condition)) { \
+ error_description = description; \
+ goto error; \
+ } \
+ } while (0)
+
+int ssb_sdio_get_invariants(struct ssb_bus *bus,
+ struct ssb_init_invariants *iv)
+{
+ struct ssb_sprom *sprom = &iv->sprom;
+ struct ssb_boardinfo *bi = &iv->boardinfo;
+ const char *error_description = "none";
+ struct sdio_func_tuple *tuple;
+ void *mac;
+
+ memset(sprom, 0xFF, sizeof(*sprom));
+ sprom->boardflags_lo = 0;
+ sprom->boardflags_hi = 0;
+
+ tuple = bus->host_sdio->tuples;
+ while (tuple) {
+ switch (tuple->code) {
+ case 0x22: /* extended function */
+ switch (tuple->data[0]) {
+ case CISTPL_FUNCE_LAN_NODE_ID:
+ GOTO_ERROR_ON((tuple->size != 7) &&
+ (tuple->data[1] != 6),
+ "mac tpl size");
+ /* fetch the MAC address. */
+ mac = tuple->data + 2;
+ memcpy(sprom->il0mac, mac, ETH_ALEN);
+ memcpy(sprom->et1mac, mac, ETH_ALEN);
+ break;
+ default:
+ break;
+ }
+ break;
+ case 0x80: /* vendor specific tuple */
+ switch (tuple->data[0]) {
+ case SSB_SDIO_CIS_SROMREV:
+ GOTO_ERROR_ON(tuple->size != 2,
+ "sromrev tpl size");
+ sprom->revision = tuple->data[1];
+ break;
+ case SSB_SDIO_CIS_ID:
+ GOTO_ERROR_ON((tuple->size != 5) &&
+ (tuple->size != 7),
+ "id tpl size");
+ bi->vendor = tuple->data[1] |
+ (tuple->data[2]<<8);
+ break;
+ case SSB_SDIO_CIS_BOARDREV:
+ GOTO_ERROR_ON(tuple->size != 2,
+ "boardrev tpl size");
+ sprom->board_rev = tuple->data[1];
+ break;
+ case SSB_SDIO_CIS_PA:
+ GOTO_ERROR_ON((tuple->size != 9) &&
+ (tuple->size != 10),
+ "pa tpl size");
+ sprom->pa0b0 = tuple->data[1] |
+ ((u16)tuple->data[2] << 8);
+ sprom->pa0b1 = tuple->data[3] |
+ ((u16)tuple->data[4] << 8);
+ sprom->pa0b2 = tuple->data[5] |
+ ((u16)tuple->data[6] << 8);
+ sprom->itssi_a = tuple->data[7];
+ sprom->itssi_bg = tuple->data[7];
+ sprom->maxpwr_a = tuple->data[8];
+ sprom->maxpwr_bg = tuple->data[8];
+ break;
+ case SSB_SDIO_CIS_OEMNAME:
+ /* Not present */
+ break;
+ case SSB_SDIO_CIS_CCODE:
+ GOTO_ERROR_ON(tuple->size != 2,
+ "ccode tpl size");
+ sprom->country_code = tuple->data[1];
+ break;
+ case SSB_SDIO_CIS_ANTENNA:
+ GOTO_ERROR_ON(tuple->size != 2,
+ "ant tpl size");
+ sprom->ant_available_a = tuple->data[1];
+ sprom->ant_available_bg = tuple->data[1];
+ break;
+ case SSB_SDIO_CIS_ANTGAIN:
+ GOTO_ERROR_ON(tuple->size != 2,
+ "antg tpl size");
+ sprom->antenna_gain.ghz24.a0 = tuple->data[1];
+ sprom->antenna_gain.ghz24.a1 = tuple->data[1];
+ sprom->antenna_gain.ghz24.a2 = tuple->data[1];
+ sprom->antenna_gain.ghz24.a3 = tuple->data[1];
+ sprom->antenna_gain.ghz5.a0 = tuple->data[1];
+ sprom->antenna_gain.ghz5.a1 = tuple->data[1];
+ sprom->antenna_gain.ghz5.a2 = tuple->data[1];
+ sprom->antenna_gain.ghz5.a3 = tuple->data[1];
+ break;
+ case SSB_SDIO_CIS_BFLAGS:
+ GOTO_ERROR_ON((tuple->size != 3) &&
+ (tuple->size != 5),
+ "bfl tpl size");
+ sprom->boardflags_lo = tuple->data[1] |
+ ((u16)tuple->data[2] << 8);
+ break;
+ case SSB_SDIO_CIS_LEDS:
+ GOTO_ERROR_ON(tuple->size != 5,
+ "leds tpl size");
+ sprom->gpio0 = tuple->data[1];
+ sprom->gpio1 = tuple->data[2];
+ sprom->gpio2 = tuple->data[3];
+ sprom->gpio3 = tuple->data[4];
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ tuple = tuple->next;
+ }
+
+ return 0;
+error:
+ dev_err(ssb_sdio_dev(bus), "failed to fetch device invariants: %s\n",
+ error_description);
+ return -ENODEV;
+}
+
+void ssb_sdio_exit(struct ssb_bus *bus)
+{
+ if (bus->bustype != SSB_BUSTYPE_SDIO)
+ return;
+ /* Nothing to do here. */
+}
+
+int ssb_sdio_init(struct ssb_bus *bus)
+{
+ if (bus->bustype != SSB_BUSTYPE_SDIO)
+ return 0;
+
+ bus->sdio_sbaddr = ~0;
+
+ return 0;
+}
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
@@ -13,6 +13,9 @@
#include "ssb_private.h"
+#include <linux/ctype.h>
+#include <linux/slab.h>
+
static const struct ssb_sprom *fallback_sprom;
@@ -33,17 +36,27 @@ static int sprom2hex(const u16 *sprom, c
static int hex2sprom(u16 *sprom, const char *dump, size_t len,
size_t sprom_size_words)
{
- char tmp[5] = { 0 };
- int cnt = 0;
+ char c, tmp[5] = { 0 };
+ int err, cnt = 0;
unsigned long parsed;
- if (len < sprom_size_words * 2)
+ /* Strip whitespace at the end. */
+ while (len) {
+ c = dump[len - 1];
+ if (!isspace(c) && c != '\0')
+ break;
+ len--;
+ }
+ /* Length must match exactly. */
+ if (len != sprom_size_words * 4)
return -EINVAL;
while (cnt < sprom_size_words) {
memcpy(tmp, dump, 4);
dump += 4;
- parsed = simple_strtoul(tmp, NULL, 16);
+ err = strict_strtoul(tmp, 16, &parsed);
+ if (err)
+ return err;
sprom[cnt++] = swab16((u16)parsed);
}
@@ -90,6 +103,7 @@ ssize_t ssb_attr_sprom_store(struct ssb_
u16 *sprom;
int res = 0, err = -ENOMEM;
size_t sprom_size_words = bus->sprom_size;
+ struct ssb_freeze_context freeze;
sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL);
if (!sprom)
@@ -111,18 +125,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
err = -ERESTARTSYS;
if (mutex_lock_interruptible(&bus->sprom_mutex))
goto out_kfree;
- err = ssb_devices_freeze(bus);
- if (err == -EOPNOTSUPP) {
- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. "
- "No suspend support. Is CONFIG_PM enabled?\n");
- goto out_unlock;
- }
+ err = ssb_devices_freeze(bus, &freeze);
if (err) {
ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
goto out_unlock;
}
res = sprom_write(bus, sprom);
- err = ssb_devices_thaw(bus);
+ err = ssb_devices_thaw(&freeze);
if (err)
ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
out_unlock:
@@ -167,3 +176,18 @@ const struct ssb_sprom *ssb_get_fallback
{
return fallback_sprom;
}
+
+/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
+bool ssb_is_sprom_available(struct ssb_bus *bus)
+{
+ /* status register only exists on chipcomon rev >= 11 and we need check
+ for >= 31 only */
+ /* this routine differs from specs as we do not access SPROM directly
+ on PCMCIA */
+ if (bus->bustype == SSB_BUSTYPE_PCI &&
+ bus->chipco.dev && /* can be unavailible! */
+ bus->chipco.dev->id.revision >= 31)
+ return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
+
+ return true;
+}
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -114,6 +114,46 @@ static inline int ssb_pcmcia_init(struct
}
#endif /* CONFIG_SSB_PCMCIAHOST */
+/* sdio.c */
+#ifdef CONFIG_SSB_SDIOHOST
+extern int ssb_sdio_get_invariants(struct ssb_bus *bus,
+ struct ssb_init_invariants *iv);
+
+extern u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset);
+extern int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev);
+extern int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx);
+extern int ssb_sdio_hardware_setup(struct ssb_bus *bus);
+extern void ssb_sdio_exit(struct ssb_bus *bus);
+extern int ssb_sdio_init(struct ssb_bus *bus);
+
+extern const struct ssb_bus_ops ssb_sdio_ops;
+#else /* CONFIG_SSB_SDIOHOST */
+static inline u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset)
+{
+ return 0;
+}
+static inline int ssb_sdio_switch_core(struct ssb_bus *bus,
+ struct ssb_device *dev)
+{
+ return 0;
+}
+static inline int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
+{
+ return 0;
+}
+static inline int ssb_sdio_hardware_setup(struct ssb_bus *bus)
+{
+ return 0;
+}
+static inline void ssb_sdio_exit(struct ssb_bus *bus)
+{
+}
+static inline int ssb_sdio_init(struct ssb_bus *bus)
+{
+ return 0;
+}
+#endif /* CONFIG_SSB_SDIOHOST */
+
/* scan.c */
extern const char *ssb_core_name(u16 coreid);
@@ -136,19 +176,27 @@ extern const struct ssb_sprom *ssb_get_f
/* core.c */
extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m);
-extern int ssb_devices_freeze(struct ssb_bus *bus);
-extern int ssb_devices_thaw(struct ssb_bus *bus);
extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
int ssb_for_each_bus_call(unsigned long data,
int (*func)(struct ssb_bus *bus, unsigned long data));
extern struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev);
+struct ssb_freeze_context {
+ /* Pointer to the bus */
+ struct ssb_bus *bus;
+ /* Boolean list to indicate whether a device is frozen on this bus. */
+ bool device_frozen[SSB_MAX_NR_CORES];
+};
+extern int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx);
+extern int ssb_devices_thaw(struct ssb_freeze_context *ctx);
+
+
/* b43_pci_bridge.c */
#ifdef CONFIG_SSB_B43_PCI_BRIDGE
extern int __init b43_pci_ssb_bridge_init(void);
extern void __exit b43_pci_ssb_bridge_exit(void);
-#else /* CONFIG_SSB_B43_PCI_BRIDGR */
+#else /* CONFIG_SSB_B43_PCI_BRIDGE */
static inline int b43_pci_ssb_bridge_init(void)
{
return 0;
@@ -156,6 +204,6 @@ static inline int b43_pci_ssb_bridge_ini
static inline void b43_pci_ssb_bridge_exit(void)
{
}
-#endif /* CONFIG_SSB_PCIHOST */
+#endif /* CONFIG_SSB_B43_PCI_BRIDGE */
#endif /* LINUX_SSB_PRIVATE_H_ */
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2034,6 +2034,7 @@
#define PCI_DEVICE_ID_AFAVLAB_P030 0x2182
#define PCI_SUBDEVICE_ID_AFAVLAB_P061 0x2150
+#define PCI_VENDOR_ID_BCM_GVC 0x14a4
#define PCI_VENDOR_ID_BROADCOM 0x14e4
#define PCI_DEVICE_ID_TIGON3_5752 0x1600
#define PCI_DEVICE_ID_TIGON3_5752M 0x1601
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -27,24 +27,58 @@ struct ssb_sprom {
u8 et1mdcport; /* MDIO for enet1 */
u8 board_rev; /* Board revision number from SPROM. */
u8 country_code; /* Country Code */
- u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */
- u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */
+ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
+ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
u16 pa0b0;
u16 pa0b1;
u16 pa0b2;
u16 pa1b0;
u16 pa1b1;
u16 pa1b2;
+ u16 pa1lob0;
+ u16 pa1lob1;
+ u16 pa1lob2;
+ u16 pa1hib0;
+ u16 pa1hib1;
+ u16 pa1hib2;
u8 gpio0; /* GPIO pin 0 */
u8 gpio1; /* GPIO pin 1 */
u8 gpio2; /* GPIO pin 2 */
u8 gpio3; /* GPIO pin 3 */
- u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */
- u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */
+ u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
+ u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
+ u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
+ u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
u8 itssi_a; /* Idle TSSI Target for A-PHY */
u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */
- u16 boardflags_lo; /* Boardflags (low 16 bits) */
- u16 boardflags_hi; /* Boardflags (high 16 bits) */
+ u8 tri2g; /* 2.4GHz TX isolation */
+ u8 tri5gl; /* 5.2GHz TX isolation */
+ u8 tri5g; /* 5.3GHz TX isolation */
+ u8 tri5gh; /* 5.8GHz TX isolation */
+ u8 txpid2g[4]; /* 2GHz TX power index */
+ u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */
+ u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */
+ u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */
+ u8 rxpo2g; /* 2GHz RX power offset */
+ u8 rxpo5g; /* 5GHz RX power offset */
+ u8 rssisav2g; /* 2GHz RSSI params */
+ u8 rssismc2g;
+ u8 rssismf2g;
+ u8 bxa2g; /* 2GHz BX arch */
+ u8 rssisav5g; /* 5GHz RSSI params */
+ u8 rssismc5g;
+ u8 rssismf5g;
+ u8 bxa5g; /* 5GHz BX arch */
+ u16 cck2gpo; /* CCK power offset */
+ u32 ofdm2gpo; /* 2.4GHz OFDM power offset */
+ u32 ofdm5glpo; /* 5.2GHz OFDM power offset */
+ u32 ofdm5gpo; /* 5.3GHz OFDM power offset */
+ u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */
+ u16 boardflags_lo; /* Board flags (bits 0-15) */
+ u16 boardflags_hi; /* Board flags (bits 16-31) */
+ u16 boardflags2_lo; /* Board flags (bits 32-47) */
+ u16 boardflags2_hi; /* Board flags (bits 48-63) */
+ /* TODO store board flags in a single u64 */
/* Antenna gain values for up to 4 antennas
* on each band. Values in dBm/4 (Q5.2). Negative gain means the
@@ -58,7 +92,7 @@ struct ssb_sprom {
} ghz5; /* 5GHz band */
} antenna_gain;
- /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
+ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
};
/* Information about the PCB the circuitry is soldered on. */
@@ -137,7 +171,7 @@ struct ssb_device {
* is an optimization. */
const struct ssb_bus_ops *ops;
- struct device *dev;
+ struct device *dev, *dma_dev;
struct ssb_bus *bus;
struct ssb_device_id id;
@@ -208,6 +242,7 @@ enum ssb_bustype {
SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */
SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */
SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */
+ SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */
};
/* board_vendor */
@@ -238,20 +273,33 @@ struct ssb_bus {
const struct ssb_bus_ops *ops;
- /* The core in the basic address register window. (PCI bus only) */
+ /* The core currently mapped into the MMIO window.
+ * Not valid on all host-buses. So don't use outside of SSB. */
struct ssb_device *mapped_device;
- /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
- u8 mapped_pcmcia_seg;
+ union {
+ /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
+ u8 mapped_pcmcia_seg;
+ /* Current SSB base address window for SDIO. */
+ u32 sdio_sbaddr;
+ };
/* Lock for core and segment switching.
* On PCMCIA-host busses this is used to protect the whole MMIO access. */
spinlock_t bar_lock;
- /* The bus this backplane is running on. */
+ /* The host-bus this backplane is running on. */
enum ssb_bustype bustype;
- /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
- struct pci_dev *host_pci;
- /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
- struct pcmcia_device *host_pcmcia;
+ /* Pointers to the host-bus. Check bustype before using any of these pointers. */
+ union {
+ /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
+ struct pci_dev *host_pci;
+ /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
+ struct pcmcia_device *host_pcmcia;
+ /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
+ struct sdio_func *host_sdio;
+ };
+
+ /* See enum ssb_quirks */
+ unsigned int quirks;
#ifdef CONFIG_SSB_SPROM
/* Mutex to protect the SPROM writing. */
@@ -261,6 +309,7 @@ struct ssb_bus {
/* ID information about the Chip. */
u16 chip_id;
u16 chip_rev;
+ u16 sprom_offset;
u16 sprom_size; /* number of words in sprom */
u8 chip_package;
@@ -306,6 +355,11 @@ struct ssb_bus {
#endif /* DEBUG */
};
+enum ssb_quirks {
+ /* SDIO connected card requires performing a read after writing a 32-bit value */
+ SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0),
+};
+
/* The initialization-invariants. */
struct ssb_init_invariants {
/* Versioning information about the PCB. */
@@ -336,9 +390,18 @@ extern int ssb_bus_pcmciabus_register(st
struct pcmcia_device *pcmcia_dev,
unsigned long baseaddr);
#endif /* CONFIG_SSB_PCMCIAHOST */
+#ifdef CONFIG_SSB_SDIOHOST
+extern int ssb_bus_sdiobus_register(struct ssb_bus *bus,
+ struct sdio_func *sdio_func,
+ unsigned int quirks);
+#endif /* CONFIG_SSB_SDIOHOST */
+
extern void ssb_bus_unregister(struct ssb_bus *bus);
+/* Does the device have an SPROM? */
+extern bool ssb_is_sprom_available(struct ssb_bus *bus);
+
/* Set a fallback SPROM.
* See kdoc at the function definition for complete documentation. */
extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -53,6 +53,7 @@
#define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */
#define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
#define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
+#define SSB_CHIPCO_CAP_SPROM 0x40000000 /* SPROM present */
#define SSB_CHIPCO_CORECTL 0x0008
#define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
#define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
@@ -385,6 +386,7 @@
/** Chip specific Chip-Status register contents. */
+#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS 0x00000040 /* SPROM present */
#define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003
#define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */
#define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */
@@ -398,6 +400,18 @@
#define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4
#define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */
+/** Macros to determine SPROM presence based on Chip-Status register. */
+#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \
+ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
+ SSB_CHIPCO_CHST_4325_OTP_SEL)
+#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \
+ (status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS)
+#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \
+ (((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
+ SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \
+ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
+ SSB_CHIPCO_CHST_4325_OTP_SEL))
+
/** Clockcontrol masks and values **/
@@ -564,6 +578,7 @@ struct ssb_chipcommon_pmu {
struct ssb_chipcommon {
struct ssb_device *dev;
u32 capabilities;
+ u32 status;
/* Fast Powerup Delay constant */
u16 fast_pwrup_delay;
struct ssb_chipcommon_pmu pmu;
@@ -629,5 +644,15 @@ extern int ssb_chipco_serial_init(struct
/* PMU support */
extern void ssb_pmu_init(struct ssb_chipcommon *cc);
+enum ssb_pmu_ldo_volt_id {
+ LDO_PAREF = 0,
+ LDO_VOLT1,
+ LDO_VOLT2,
+ LDO_VOLT3,
+};
+
+void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
+ enum ssb_pmu_ldo_volt_id id, u32 voltage);
+void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
#endif /* LINUX_SSB_CHIPCO_H_ */
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -85,6 +85,8 @@
#define SSB_IMSTATE_AP_RSV 0x00000030 /* Reserved */
#define SSB_IMSTATE_IBE 0x00020000 /* In Band Error */
#define SSB_IMSTATE_TO 0x00040000 /* Timeout */
+#define SSB_IMSTATE_BUSY 0x01800000 /* Busy (Backplane rev >= 2.3 only) */
+#define SSB_IMSTATE_REJECT 0x02000000 /* Reject (Backplane rev >= 2.3 only) */
#define SSB_INTVEC 0x0F94 /* SB Interrupt Mask */
#define SSB_INTVEC_PCI 0x00000001 /* Enable interrupts for PCI */
#define SSB_INTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */
@@ -162,7 +164,7 @@
/* SPROM shadow area. If not otherwise noted, fields are
* two bytes wide. Note that the SPROM can _only_ be read
- * in two-byte quantinies.
+ * in two-byte quantities.
*/
#define SSB_SPROMSIZE_WORDS 64
#define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16))
@@ -170,26 +172,27 @@
#define SSB_SPROMSIZE_WORDS_R4 220
#define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
#define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
-#define SSB_SPROM_BASE 0x1000
-#define SSB_SPROM_REVISION 0x107E
+#define SSB_SPROM_BASE1 0x1000
+#define SSB_SPROM_BASE31 0x0800
+#define SSB_SPROM_REVISION 0x007E
#define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */
#define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */
#define SSB_SPROM_REVISION_CRC_SHIFT 8
/* SPROM Revision 1 */
-#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */
-#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */
-#define SSB_SPROM1_PID 0x1008 /* Product ID for PCI */
-#define SSB_SPROM1_IL0MAC 0x1048 /* 6 bytes MAC address for 802.11b/g */
-#define SSB_SPROM1_ET0MAC 0x104E /* 6 bytes MAC address for Ethernet */
-#define SSB_SPROM1_ET1MAC 0x1054 /* 6 bytes MAC address for 802.11a */
-#define SSB_SPROM1_ETHPHY 0x105A /* Ethernet PHY settings */
+#define SSB_SPROM1_SPID 0x0004 /* Subsystem Product ID for PCI */
+#define SSB_SPROM1_SVID 0x0006 /* Subsystem Vendor ID for PCI */
+#define SSB_SPROM1_PID 0x0008 /* Product ID for PCI */
+#define SSB_SPROM1_IL0MAC 0x0048 /* 6 bytes MAC address for 802.11b/g */
+#define SSB_SPROM1_ET0MAC 0x004E /* 6 bytes MAC address for Ethernet */
+#define SSB_SPROM1_ET1MAC 0x0054 /* 6 bytes MAC address for 802.11a */
+#define SSB_SPROM1_ETHPHY 0x005A /* Ethernet PHY settings */
#define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
#define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
#define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5
#define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
#define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
-#define SSB_SPROM1_BINF 0x105C /* Board info */
+#define SSB_SPROM1_BINF 0x005C /* Board info */
#define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */
#define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */
#define SSB_SPROM1_BINF_CCODE_SHIFT 8
@@ -197,63 +200,63 @@
#define SSB_SPROM1_BINF_ANTBG_SHIFT 12
#define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */
#define SSB_SPROM1_BINF_ANTA_SHIFT 14
-#define SSB_SPROM1_PA0B0 0x105E
-#define SSB_SPROM1_PA0B1 0x1060
-#define SSB_SPROM1_PA0B2 0x1062
-#define SSB_SPROM1_GPIOA 0x1064 /* General Purpose IO pins 0 and 1 */
+#define SSB_SPROM1_PA0B0 0x005E
+#define SSB_SPROM1_PA0B1 0x0060
+#define SSB_SPROM1_PA0B2 0x0062
+#define SSB_SPROM1_GPIOA 0x0064 /* General Purpose IO pins 0 and 1 */
#define SSB_SPROM1_GPIOA_P0 0x00FF /* Pin 0 */
#define SSB_SPROM1_GPIOA_P1 0xFF00 /* Pin 1 */
#define SSB_SPROM1_GPIOA_P1_SHIFT 8
-#define SSB_SPROM1_GPIOB 0x1066 /* General Purpuse IO pins 2 and 3 */
+#define SSB_SPROM1_GPIOB 0x0066 /* General Purpuse IO pins 2 and 3 */
#define SSB_SPROM1_GPIOB_P2 0x00FF /* Pin 2 */
#define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */
#define SSB_SPROM1_GPIOB_P3_SHIFT 8
-#define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */
+#define SSB_SPROM1_MAXPWR 0x0068 /* Power Amplifier Max Power */
#define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */
#define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */
#define SSB_SPROM1_MAXPWR_A_SHIFT 8
-#define SSB_SPROM1_PA1B0 0x106A
-#define SSB_SPROM1_PA1B1 0x106C
-#define SSB_SPROM1_PA1B2 0x106E
-#define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */
+#define SSB_SPROM1_PA1B0 0x006A
+#define SSB_SPROM1_PA1B1 0x006C
+#define SSB_SPROM1_PA1B2 0x006E
+#define SSB_SPROM1_ITSSI 0x0070 /* Idle TSSI Target */
#define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/
#define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */
#define SSB_SPROM1_ITSSI_A_SHIFT 8
-#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */
-#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */
+#define SSB_SPROM1_BFLLO 0x0072 /* Boardflags (low 16 bits) */
+#define SSB_SPROM1_AGAIN 0x0074 /* Antenna Gain (in dBm Q5.2) */
#define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */
#define SSB_SPROM1_AGAIN_BG_SHIFT 0
#define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */
#define SSB_SPROM1_AGAIN_A_SHIFT 8
/* SPROM Revision 2 (inherits from rev 1) */
-#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */
-#define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */
+#define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */
+#define SSB_SPROM2_MAXP_A 0x003A /* A-PHY Max Power */
#define SSB_SPROM2_MAXP_A_HI 0x00FF /* Max Power High */
#define SSB_SPROM2_MAXP_A_LO 0xFF00 /* Max Power Low */
#define SSB_SPROM2_MAXP_A_LO_SHIFT 8
-#define SSB_SPROM2_PA1LOB0 0x103C /* A-PHY PowerAmplifier Low Settings */
-#define SSB_SPROM2_PA1LOB1 0x103E /* A-PHY PowerAmplifier Low Settings */
-#define SSB_SPROM2_PA1LOB2 0x1040 /* A-PHY PowerAmplifier Low Settings */
-#define SSB_SPROM2_PA1HIB0 0x1042 /* A-PHY PowerAmplifier High Settings */
-#define SSB_SPROM2_PA1HIB1 0x1044 /* A-PHY PowerAmplifier High Settings */
-#define SSB_SPROM2_PA1HIB2 0x1046 /* A-PHY PowerAmplifier High Settings */
-#define SSB_SPROM2_OPO 0x1078 /* OFDM Power Offset from CCK Level */
+#define SSB_SPROM2_PA1LOB0 0x003C /* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1LOB1 0x003E /* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1LOB2 0x0040 /* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1HIB0 0x0042 /* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_PA1HIB1 0x0044 /* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_PA1HIB2 0x0046 /* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_OPO 0x0078 /* OFDM Power Offset from CCK Level */
#define SSB_SPROM2_OPO_VALUE 0x00FF
#define SSB_SPROM2_OPO_UNUSED 0xFF00
-#define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */
+#define SSB_SPROM2_CCODE 0x007C /* Two char Country Code */
/* SPROM Revision 3 (inherits most data from rev 2) */
-#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */
-#define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
-#define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
-#define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
-#define SSB_SPROM3_GPIOLDC 0x1042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
+#define SSB_SPROM3_OFDMAPO 0x002C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_OFDMALPO 0x0030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_OFDMAHPO 0x0034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_GPIOLDC 0x0042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
#define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00 /* Off Count */
#define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8
#define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */
#define SSB_SPROM3_GPIOLDC_ON_SHIFT 16
-#define SSB_SPROM3_CCKPO 0x1078 /* CCK Power Offset */
+#define SSB_SPROM3_IL0MAC 0x004A /* 6 bytes MAC address for 802.11b/g */
+#define SSB_SPROM3_CCKPO 0x0078 /* CCK Power Offset */
#define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */
#define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */
#define SSB_SPROM3_CCKPO_2M_SHIFT 4
@@ -264,104 +267,200 @@
#define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
/* SPROM Revision 4 */
-#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */
-#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */
+#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */
+#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */
+#define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */
+#define SSB_SPROM4_BFL2HI 0x004A /* Board flags 2 Hi */
+#define SSB_SPROM4_IL0MAC 0x004C /* 6 byte MAC address for a/b/g/n */
+#define SSB_SPROM4_CCODE 0x0052 /* Country Code (2 bytes) */
+#define SSB_SPROM4_GPIOA 0x0056 /* Gen. Purpose IO # 0 and 1 */
+#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */
+#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */
+#define SSB_SPROM4_GPIOA_P1_SHIFT 8
+#define SSB_SPROM4_GPIOB 0x0058 /* Gen. Purpose IO # 2 and 3 */
+#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */
+#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */
+#define SSB_SPROM4_GPIOB_P3_SHIFT 8
+#define SSB_SPROM4_ETHPHY 0x005A /* Ethernet PHY settings ?? */
#define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
#define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
#define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
#define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
#define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
-#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */
-#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */
-#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
-#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
-#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
-#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */
-#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */
+#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */
+#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
+#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
+#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
+#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
+#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */
#define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
#define SSB_SPROM4_AGAIN0_SHIFT 0
#define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */
#define SSB_SPROM4_AGAIN1_SHIFT 8
-#define SSB_SPROM4_AGAIN23 0x1060
+#define SSB_SPROM4_AGAIN23 0x0060
#define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */
#define SSB_SPROM4_AGAIN2_SHIFT 0
#define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */
#define SSB_SPROM4_AGAIN3_SHIFT 8
-#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */
-#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */
+#define SSB_SPROM4_TXPID2G01 0x0062 /* TX Power Index 2GHz */
+#define SSB_SPROM4_TXPID2G0 0x00FF
+#define SSB_SPROM4_TXPID2G0_SHIFT 0
+#define SSB_SPROM4_TXPID2G1 0xFF00
+#define SSB_SPROM4_TXPID2G1_SHIFT 8
+#define SSB_SPROM4_TXPID2G23 0x0064 /* TX Power Index 2GHz */
+#define SSB_SPROM4_TXPID2G2 0x00FF
+#define SSB_SPROM4_TXPID2G2_SHIFT 0
+#define SSB_SPROM4_TXPID2G3 0xFF00
+#define SSB_SPROM4_TXPID2G3_SHIFT 8
+#define SSB_SPROM4_TXPID5G01 0x0066 /* TX Power Index 5GHz middle subband */
+#define SSB_SPROM4_TXPID5G0 0x00FF
+#define SSB_SPROM4_TXPID5G0_SHIFT 0
+#define SSB_SPROM4_TXPID5G1 0xFF00
+#define SSB_SPROM4_TXPID5G1_SHIFT 8
+#define SSB_SPROM4_TXPID5G23 0x0068 /* TX Power Index 5GHz middle subband */
+#define SSB_SPROM4_TXPID5G2 0x00FF
+#define SSB_SPROM4_TXPID5G2_SHIFT 0
+#define SSB_SPROM4_TXPID5G3 0xFF00
+#define SSB_SPROM4_TXPID5G3_SHIFT 8
+#define SSB_SPROM4_TXPID5GL01 0x006A /* TX Power Index 5GHz low subband */
+#define SSB_SPROM4_TXPID5GL0 0x00FF
+#define SSB_SPROM4_TXPID5GL0_SHIFT 0
+#define SSB_SPROM4_TXPID5GL1 0xFF00
+#define SSB_SPROM4_TXPID5GL1_SHIFT 8
+#define SSB_SPROM4_TXPID5GL23 0x006C /* TX Power Index 5GHz low subband */
+#define SSB_SPROM4_TXPID5GL2 0x00FF
+#define SSB_SPROM4_TXPID5GL2_SHIFT 0
+#define SSB_SPROM4_TXPID5GL3 0xFF00
+#define SSB_SPROM4_TXPID5GL3_SHIFT 8
+#define SSB_SPROM4_TXPID5GH01 0x006E /* TX Power Index 5GHz high subband */
+#define SSB_SPROM4_TXPID5GH0 0x00FF
+#define SSB_SPROM4_TXPID5GH0_SHIFT 0
+#define SSB_SPROM4_TXPID5GH1 0xFF00
+#define SSB_SPROM4_TXPID5GH1_SHIFT 8
+#define SSB_SPROM4_TXPID5GH23 0x0070 /* TX Power Index 5GHz high subband */
+#define SSB_SPROM4_TXPID5GH2 0x00FF
+#define SSB_SPROM4_TXPID5GH2_SHIFT 0
+#define SSB_SPROM4_TXPID5GH3 0xFF00
+#define SSB_SPROM4_TXPID5GH3_SHIFT 8
+#define SSB_SPROM4_MAXP_BG 0x0080 /* Max Power BG in path 1 */
#define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */
#define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
#define SSB_SPROM4_ITSSI_BG_SHIFT 8
-#define SSB_SPROM4_MAXP_A 0x108A /* Max Power A in path 1 */
+#define SSB_SPROM4_MAXP_A 0x008A /* Max Power A in path 1 */
#define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */
#define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
#define SSB_SPROM4_ITSSI_A_SHIFT 8
-#define SSB_SPROM4_GPIOA 0x1056 /* Gen. Purpose IO # 0 and 1 */
-#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */
-#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */
-#define SSB_SPROM4_GPIOA_P1_SHIFT 8
-#define SSB_SPROM4_GPIOB 0x1058 /* Gen. Purpose IO # 2 and 3 */
-#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */
-#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */
-#define SSB_SPROM4_GPIOB_P3_SHIFT 8
-#define SSB_SPROM4_PA0B0 0x1082 /* The paXbY locations are */
-#define SSB_SPROM4_PA0B1 0x1084 /* only guesses */
-#define SSB_SPROM4_PA0B2 0x1086
-#define SSB_SPROM4_PA1B0 0x108E
-#define SSB_SPROM4_PA1B1 0x1090
-#define SSB_SPROM4_PA1B2 0x1092
+#define SSB_SPROM4_PA0B0 0x0082 /* The paXbY locations are */
+#define SSB_SPROM4_PA0B1 0x0084 /* only guesses */
+#define SSB_SPROM4_PA0B2 0x0086
+#define SSB_SPROM4_PA1B0 0x008E
+#define SSB_SPROM4_PA1B1 0x0090
+#define SSB_SPROM4_PA1B2 0x0092
/* SPROM Revision 5 (inherits most data from rev 4) */
-#define SSB_SPROM5_BFLLO 0x104A /* Boardflags (low 16 bits) */
-#define SSB_SPROM5_BFLHI 0x104C /* Board Flags Hi */
-#define SSB_SPROM5_IL0MAC 0x1052 /* 6 byte MAC address for a/b/g/n */
-#define SSB_SPROM5_CCODE 0x1044 /* Country Code (2 bytes) */
-#define SSB_SPROM5_GPIOA 0x1076 /* Gen. Purpose IO # 0 and 1 */
+#define SSB_SPROM5_CCODE 0x0044 /* Country Code (2 bytes) */
+#define SSB_SPROM5_BFLLO 0x004A /* Boardflags (low 16 bits) */
+#define SSB_SPROM5_BFLHI 0x004C /* Board Flags Hi */
+#define SSB_SPROM5_BFL2LO 0x004E /* Board flags 2 (low 16 bits) */
+#define SSB_SPROM5_BFL2HI 0x0050 /* Board flags 2 Hi */
+#define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */
+#define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */
#define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */
#define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */
#define SSB_SPROM5_GPIOA_P1_SHIFT 8
-#define SSB_SPROM5_GPIOB 0x1078 /* Gen. Purpose IO # 2 and 3 */
+#define SSB_SPROM5_GPIOB 0x0078 /* Gen. Purpose IO # 2 and 3 */
#define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */
#define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */
#define SSB_SPROM5_GPIOB_P3_SHIFT 8
/* SPROM Revision 8 */
-#define SSB_SPROM8_BFLLO 0x1084 /* Boardflags (low 16 bits) */
-#define SSB_SPROM8_BFLHI 0x1086 /* Boardflags Hi */
-#define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */
-#define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */
-#define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/
-#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
-#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
-#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
-#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0
-#define SSB_SPROM8_AGAIN01 0x109E /* Antenna Gain (in dBm Q5.2) */
+#define SSB_SPROM8_BOARDREV 0x0082 /* Board revision */
+#define SSB_SPROM8_BFLLO 0x0084 /* Board flags (bits 0-15) */
+#define SSB_SPROM8_BFLHI 0x0086 /* Board flags (bits 16-31) */
+#define SSB_SPROM8_BFL2LO 0x0088 /* Board flags (bits 32-47) */
+#define SSB_SPROM8_BFL2HI 0x008A /* Board flags (bits 48-63) */
+#define SSB_SPROM8_IL0MAC 0x008C /* 6 byte MAC address */
+#define SSB_SPROM8_CCODE 0x0092 /* 2 byte country code */
+#define SSB_SPROM8_GPIOA 0x0096 /*Gen. Purpose IO # 0 and 1 */
+#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */
+#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */
+#define SSB_SPROM8_GPIOA_P1_SHIFT 8
+#define SSB_SPROM8_GPIOB 0x0098 /* Gen. Purpose IO # 2 and 3 */
+#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
+#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
+#define SSB_SPROM8_GPIOB_P3_SHIFT 8
+#define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/
+#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
+#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
+#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
+#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0
+#define SSB_SPROM8_AGAIN01 0x009E /* Antenna Gain (in dBm Q5.2) */
#define SSB_SPROM8_AGAIN0 0x00FF /* Antenna 0 */
#define SSB_SPROM8_AGAIN0_SHIFT 0
#define SSB_SPROM8_AGAIN1 0xFF00 /* Antenna 1 */
#define SSB_SPROM8_AGAIN1_SHIFT 8
-#define SSB_SPROM8_AGAIN23 0x10A0
+#define SSB_SPROM8_AGAIN23 0x00A0
#define SSB_SPROM8_AGAIN2 0x00FF /* Antenna 2 */
#define SSB_SPROM8_AGAIN2_SHIFT 0
#define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */
#define SSB_SPROM8_AGAIN3_SHIFT 8
-#define SSB_SPROM8_GPIOA 0x1096 /*Gen. Purpose IO # 0 and 1 */
-#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */
-#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */
-#define SSB_SPROM8_GPIOA_P1_SHIFT 8
-#define SSB_SPROM8_GPIOB 0x1098 /* Gen. Purpose IO # 2 and 3 */
-#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
-#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
-#define SSB_SPROM8_GPIOB_P3_SHIFT 8
-#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power BG in path 1 */
-#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */
+#define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */
+#define SSB_SPROM8_RSSISMF2G 0x000F
+#define SSB_SPROM8_RSSISMC2G 0x00F0
+#define SSB_SPROM8_RSSISMC2G_SHIFT 4
+#define SSB_SPROM8_RSSISAV2G 0x0700
+#define SSB_SPROM8_RSSISAV2G_SHIFT 8
+#define SSB_SPROM8_BXA2G 0x1800
+#define SSB_SPROM8_BXA2G_SHIFT 11
+#define SSB_SPROM8_RSSIPARM5G 0x00A6 /* RSSI params for 5GHz */
+#define SSB_SPROM8_RSSISMF5G 0x000F
+#define SSB_SPROM8_RSSISMC5G 0x00F0
+#define SSB_SPROM8_RSSISMC5G_SHIFT 4
+#define SSB_SPROM8_RSSISAV5G 0x0700
+#define SSB_SPROM8_RSSISAV5G_SHIFT 8
+#define SSB_SPROM8_BXA5G 0x1800
+#define SSB_SPROM8_BXA5G_SHIFT 11
+#define SSB_SPROM8_TRI25G 0x00A8 /* TX isolation 2.4&5.3GHz */
+#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */
+#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */
+#define SSB_SPROM8_TRI5G_SHIFT 8
+#define SSB_SPROM8_TRI5GHL 0x00AA /* TX isolation 5.2/5.8GHz */
+#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */
+#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */
+#define SSB_SPROM8_TRI5GH_SHIFT 8
+#define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */
+#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
+#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
+#define SSB_SPROM8_RXPO5G_SHIFT 8
+#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
+#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
#define SSB_SPROM8_ITSSI_BG_SHIFT 8
-#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power A in path 1 */
-#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power A */
+#define SSB_SPROM8_PA0B0 0x00C2 /* 2GHz power amp settings */
+#define SSB_SPROM8_PA0B1 0x00C4
+#define SSB_SPROM8_PA0B2 0x00C6
+#define SSB_SPROM8_MAXP_A 0x00C8 /* Max Power 5.3GHz */
+#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */
#define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
#define SSB_SPROM8_ITSSI_A_SHIFT 8
+#define SSB_SPROM8_MAXP_AHL 0x00CA /* Max Power 5.2/5.8GHz */
+#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */
+#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */
+#define SSB_SPROM8_MAXP_AL_SHIFT 8
+#define SSB_SPROM8_PA1B0 0x00CC /* 5.3GHz power amp settings */
+#define SSB_SPROM8_PA1B1 0x00CE
+#define SSB_SPROM8_PA1B2 0x00D0
+#define SSB_SPROM8_PA1LOB0 0x00D2 /* 5.2GHz power amp settings */
+#define SSB_SPROM8_PA1LOB1 0x00D4
+#define SSB_SPROM8_PA1LOB2 0x00D6
+#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
+#define SSB_SPROM8_PA1HIB1 0x00DA
+#define SSB_SPROM8_PA1HIB2 0x00DC
+#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
+#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */
/* Values for SSB_SPROM1_BINF_CCODE */
enum {
View Git Blame Copy Permalink