1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-19 07:16:16 +02:00
openwrt-xburst/package/mac80211/patches/000-mac80211_update.patch
nbd 5fe95d1b66 fix up hostapd for mac80211
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-16 03:10:56 +00:00

934 lines
30 KiB
Diff

Index: mac80211/include/linux/ieee80211.h
===================================================================
--- mac80211.orig/include/linux/ieee80211.h 2007-11-11 15:45:23.153490050 +0100
+++ mac80211/include/linux/ieee80211.h 2007-11-11 15:45:30.417904025 +0100
@@ -81,18 +81,18 @@
/* miscellaneous IEEE 802.11 constants */
-#define IEEE80211_MAX_FRAG_THRESHOLD 2346
-#define IEEE80211_MAX_RTS_THRESHOLD 2347
+#define IEEE80211_MAX_FRAG_THRESHOLD 2352
+#define IEEE80211_MAX_RTS_THRESHOLD 2353
#define IEEE80211_MAX_AID 2007
#define IEEE80211_MAX_TIM_LEN 251
-#define IEEE80211_MAX_DATA_LEN 2304
/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
6.2.1.1.2.
- The figure in section 7.1.2 suggests a body size of up to 2312
- bytes is allowed, which is a bit confusing, I suspect this
- represents the 2304 bytes of real data, plus a possible 8 bytes of
- WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
+ 802.11e clarifies the figure in section 7.1.2. The frame body is
+ up to 2304 octets long (maximum MSDU size) plus any crypt overhead. */
+#define IEEE80211_MAX_DATA_LEN 2304
+/* 30 byte 4 addr hdr, 2 byte QoS, 2304 byte MSDU, 12 byte crypt, 4 byte FCS */
+#define IEEE80211_MAX_FRAME_LEN 2352
#define IEEE80211_MAX_SSID_LEN 32
Index: mac80211/include/linux/nl80211.h
===================================================================
--- mac80211.orig/include/linux/nl80211.h 2007-11-11 15:45:23.161490506 +0100
+++ mac80211/include/linux/nl80211.h 2007-11-11 15:45:30.421904255 +0100
@@ -25,7 +25,7 @@
* either a dump request on a %NL80211_ATTR_WIPHY or a specific get
* on an %NL80211_ATTR_IFINDEX is supported.
* @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
- %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
+ * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
* @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
* to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
* %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
Index: mac80211/include/net/mac80211.h
===================================================================
--- mac80211.orig/include/net/mac80211.h 2007-11-11 15:45:23.169490961 +0100
+++ mac80211/include/net/mac80211.h 2007-11-11 15:45:30.429904707 +0100
@@ -706,11 +706,16 @@
*
* @queues: number of available hardware transmit queues for
* data packets. WMM/QoS requires at least four.
+ *
+ * @rate_control_algorithm: rate control algorithm for this hardware.
+ * If unset (NULL), the default algorithm will be used. Must be
+ * set before calling ieee80211_register_hw().
*/
struct ieee80211_hw {
struct ieee80211_conf conf;
struct wiphy *wiphy;
struct workqueue_struct *workqueue;
+ const char *rate_control_algorithm;
void *priv;
u32 flags;
unsigned int extra_tx_headroom;
@@ -936,27 +941,11 @@
* and remove_interface calls, i.e. while the interface with the
* given local_address is enabled.
*
- * @set_ieee8021x: Enable/disable IEEE 802.1X. This item requests wlan card
- * to pass unencrypted EAPOL-Key frames even when encryption is
- * configured. If the wlan card does not require such a configuration,
- * this function pointer can be set to NULL.
- *
- * @set_port_auth: Set port authorization state (IEEE 802.1X PAE) to be
- * authorized (@authorized=1) or unauthorized (=0). This function can be
- * used if the wlan hardware or low-level driver implements PAE.
- * mac80211 will filter frames based on authorization state in any case,
- * so this function pointer can be NULL if low-level driver does not
- * require event notification about port state changes.
- *
* @hw_scan: Ask the hardware to service the scan request, no need to start
* the scan state machine in stack.
*
* @get_stats: return low-level statistics
*
- * @set_privacy_invoked: For devices that generate their own beacons and probe
- * response or association responses this updates the state of privacy_invoked
- * returns 0 for success or an error number.
- *
* @get_sequence_counter: For devices that have internal sequence counters this
* callback allows mac80211 to access the current value of a counter.
* This callback seems not well-defined, tell us if you need it.
@@ -1029,14 +1018,9 @@
int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd,
const u8 *local_address, const u8 *address,
struct ieee80211_key_conf *key);
- int (*set_ieee8021x)(struct ieee80211_hw *hw, int use_ieee8021x);
- int (*set_port_auth)(struct ieee80211_hw *hw, u8 *addr,
- int authorized);
int (*hw_scan)(struct ieee80211_hw *hw, u8 *ssid, size_t len);
int (*get_stats)(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats);
- int (*set_privacy_invoked)(struct ieee80211_hw *hw,
- int privacy_invoked);
int (*get_sequence_counter)(struct ieee80211_hw *hw,
u8* addr, u8 keyidx, u8 txrx,
u32* iv32, u16* iv16);
Index: mac80211/net/mac80211/aes_ccm.c
===================================================================
--- mac80211.orig/net/mac80211/aes_ccm.c 2007-11-11 15:45:23.177491419 +0100
+++ mac80211/net/mac80211/aes_ccm.c 2007-11-11 15:45:30.433904936 +0100
@@ -7,10 +7,10 @@
* published by the Free Software Foundation.
*/
+#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
-#include <asm/scatterlist.h>
#include <net/mac80211.h>
#include "ieee80211_key.h"
@@ -63,7 +63,7 @@
s_0 = scratch + AES_BLOCK_LEN;
e = scratch + 2 * AES_BLOCK_LEN;
- num_blocks = (data_len + AES_BLOCK_LEN - 1) / AES_BLOCK_LEN;
+ num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_LEN);
last_len = data_len % AES_BLOCK_LEN;
aes_ccm_prepare(tfm, b_0, aad, b, s_0, b);
@@ -102,7 +102,7 @@
s_0 = scratch + AES_BLOCK_LEN;
a = scratch + 2 * AES_BLOCK_LEN;
- num_blocks = (data_len + AES_BLOCK_LEN - 1) / AES_BLOCK_LEN;
+ num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_LEN);
last_len = data_len % AES_BLOCK_LEN;
aes_ccm_prepare(tfm, b_0, aad, b, s_0, a);
Index: mac80211/net/mac80211/ieee80211.c
===================================================================
--- mac80211.orig/net/mac80211/ieee80211.c 2007-11-11 15:45:23.185491871 +0100
+++ mac80211/net/mac80211/ieee80211.c 2007-11-11 15:45:30.437905164 +0100
@@ -1061,7 +1061,8 @@
ieee80211_debugfs_add_netdev(IEEE80211_DEV_TO_SUB_IF(local->mdev));
ieee80211_if_set_type(local->mdev, IEEE80211_IF_TYPE_AP);
- result = ieee80211_init_rate_ctrl_alg(local, NULL);
+ result = ieee80211_init_rate_ctrl_alg(local,
+ hw->rate_control_algorithm);
if (result < 0) {
printk(KERN_DEBUG "%s: Failed to initialize rate control "
"algorithm\n", wiphy_name(local->hw.wiphy));
@@ -1222,8 +1223,17 @@
BUILD_BUG_ON(sizeof(struct ieee80211_tx_packet_data) > sizeof(skb->cb));
+#ifdef CONFIG_MAC80211_RCSIMPLE
+ ret = ieee80211_rate_control_register(&mac80211_rcsimple);
+ if (ret)
+ return ret;
+#endif
+
ret = ieee80211_wme_register();
if (ret) {
+#ifdef CONFIG_MAC80211_RCSIMPLE
+ ieee80211_rate_control_unregister(&mac80211_rcsimple);
+#endif
printk(KERN_DEBUG "ieee80211_init: failed to "
"initialize WME (err=%d)\n", ret);
return ret;
@@ -1237,6 +1247,10 @@
static void __exit ieee80211_exit(void)
{
+#ifdef CONFIG_MAC80211_RCSIMPLE
+ ieee80211_rate_control_unregister(&mac80211_rcsimple);
+#endif
+
ieee80211_wme_unregister();
ieee80211_debugfs_netdev_exit();
}
Index: mac80211/net/mac80211/ieee80211_i.h
===================================================================
--- mac80211.orig/net/mac80211/ieee80211_i.h 2007-11-11 15:45:23.189492100 +0100
+++ mac80211/net/mac80211/ieee80211_i.h 2007-11-11 15:45:30.441905395 +0100
@@ -232,6 +232,7 @@
#define IEEE80211_STA_AUTO_SSID_SEL BIT(10)
#define IEEE80211_STA_AUTO_BSSID_SEL BIT(11)
#define IEEE80211_STA_AUTO_CHANNEL_SEL BIT(12)
+#define IEEE80211_STA_PRIVACY_INVOKED BIT(13)
struct ieee80211_if_sta {
enum {
IEEE80211_DISABLED, IEEE80211_AUTHENTICATE,
@@ -261,7 +262,6 @@
unsigned long request;
struct sk_buff_head skb_queue;
- int key_management_enabled;
unsigned long last_probe;
#define IEEE80211_AUTH_ALG_OPEN BIT(0)
Index: mac80211/net/mac80211/ieee80211_ioctl.c
===================================================================
--- mac80211.orig/net/mac80211/ieee80211_ioctl.c 2007-11-11 15:45:23.197492559 +0100
+++ mac80211/net/mac80211/ieee80211_ioctl.c 2007-11-11 15:45:30.441905395 +0100
@@ -305,9 +305,12 @@
((chan->chan == channel) || (chan->freq == freq))) {
local->oper_channel = chan;
local->oper_hw_mode = mode;
- set++;
+ set = 1;
+ break;
}
}
+ if (set)
+ break;
}
if (set) {
@@ -507,10 +510,11 @@
static int ieee80211_ioctl_siwscan(struct net_device *dev,
struct iw_request_info *info,
- struct iw_point *data, char *extra)
+ union iwreq_data *wrqu, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct iw_scan_req *req = NULL;
u8 *ssid = NULL;
size_t ssid_len = 0;
@@ -535,6 +539,14 @@
return -EOPNOTSUPP;
}
+ /* if SSID was specified explicitly then use that */
+ if (wrqu->data.length == sizeof(struct iw_scan_req) &&
+ wrqu->data.flags & IW_SCAN_THIS_ESSID) {
+ req = (struct iw_scan_req *)extra;
+ ssid = req->essid;
+ ssid_len = req->essid_len;
+ }
+
return ieee80211_sta_req_scan(dev, ssid, ssid_len);
}
@@ -621,22 +633,35 @@
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
bool need_reconfig = 0;
+ u8 new_power_level;
if ((data->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM)
return -EINVAL;
if (data->txpower.flags & IW_TXPOW_RANGE)
return -EINVAL;
- if (!data->txpower.fixed)
- return -EINVAL;
- if (local->hw.conf.power_level != data->txpower.value) {
- local->hw.conf.power_level = data->txpower.value;
+ if (data->txpower.fixed) {
+ new_power_level = data->txpower.value;
+ } else {
+ /* Automatic power level. Get the px power from the current
+ * channel. */
+ struct ieee80211_channel* chan = local->oper_channel;
+ if (!chan)
+ return -EINVAL;
+
+ new_power_level = chan->power_level;
+ }
+
+ if (local->hw.conf.power_level != new_power_level) {
+ local->hw.conf.power_level = new_power_level;
need_reconfig = 1;
}
+
if (local->hw.conf.radio_enabled != !(data->txpower.disabled)) {
local->hw.conf.radio_enabled = !(data->txpower.disabled);
need_reconfig = 1;
}
+
if (need_reconfig) {
ieee80211_hw_config(local);
/* The return value of hw_config is not of big interest here,
@@ -904,7 +929,6 @@
struct iw_request_info *info,
struct iw_param *data, char *extra)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
int ret = 0;
@@ -914,18 +938,21 @@
case IW_AUTH_CIPHER_GROUP:
case IW_AUTH_WPA_ENABLED:
case IW_AUTH_RX_UNENCRYPTED_EAPOL:
- break;
case IW_AUTH_KEY_MGMT:
+ break;
+ case IW_AUTH_PRIVACY_INVOKED:
if (sdata->type != IEEE80211_IF_TYPE_STA)
ret = -EINVAL;
else {
+ sdata->u.sta.flags &= ~IEEE80211_STA_PRIVACY_INVOKED;
/*
- * Key management was set by wpa_supplicant,
- * we only need this to associate to a network
- * that has privacy enabled regardless of not
- * having a key.
+ * Privacy invoked by wpa_supplicant, store the
+ * value and allow associating to a protected
+ * network without having a key up front.
*/
- sdata->u.sta.key_management_enabled = !!data->value;
+ if (data->value)
+ sdata->u.sta.flags |=
+ IEEE80211_STA_PRIVACY_INVOKED;
}
break;
case IW_AUTH_80211_AUTH_ALG:
@@ -935,11 +962,6 @@
else
ret = -EOPNOTSUPP;
break;
- case IW_AUTH_PRIVACY_INVOKED:
- if (local->ops->set_privacy_invoked)
- ret = local->ops->set_privacy_invoked(
- local_to_hw(local), data->value);
- break;
default:
ret = -EOPNOTSUPP;
break;
Index: mac80211/net/mac80211/ieee80211_rate.c
===================================================================
--- mac80211.orig/net/mac80211/ieee80211_rate.c 2007-11-11 15:45:23.205493011 +0100
+++ mac80211/net/mac80211/ieee80211_rate.c 2007-11-11 15:45:30.441905395 +0100
@@ -25,13 +25,25 @@
{
struct rate_control_alg *alg;
+ if (!ops->name)
+ return -EINVAL;
+
+ mutex_lock(&rate_ctrl_mutex);
+ list_for_each_entry(alg, &rate_ctrl_algs, list) {
+ if (!strcmp(alg->ops->name, ops->name)) {
+ /* don't register an algorithm twice */
+ WARN_ON(1);
+ return -EALREADY;
+ }
+ }
+
alg = kzalloc(sizeof(*alg), GFP_KERNEL);
if (alg == NULL) {
+ mutex_unlock(&rate_ctrl_mutex);
return -ENOMEM;
}
alg->ops = ops;
- mutex_lock(&rate_ctrl_mutex);
list_add_tail(&alg->list, &rate_ctrl_algs);
mutex_unlock(&rate_ctrl_mutex);
@@ -61,9 +73,12 @@
struct rate_control_alg *alg;
struct rate_control_ops *ops = NULL;
+ if (!name)
+ return NULL;
+
mutex_lock(&rate_ctrl_mutex);
list_for_each_entry(alg, &rate_ctrl_algs, list) {
- if (!name || !strcmp(alg->ops->name, name))
+ if (!strcmp(alg->ops->name, name))
if (try_module_get(alg->ops->module)) {
ops = alg->ops;
break;
@@ -80,9 +95,12 @@
{
struct rate_control_ops *ops;
+ if (!name)
+ name = "simple";
+
ops = ieee80211_try_rate_control_ops_get(name);
if (!ops) {
- request_module("rc80211_%s", name ? name : "default");
+ request_module("rc80211_%s", name);
ops = ieee80211_try_rate_control_ops_get(name);
}
return ops;
Index: mac80211/net/mac80211/ieee80211_rate.h
===================================================================
--- mac80211.orig/net/mac80211/ieee80211_rate.h 2007-11-11 15:45:23.213493469 +0100
+++ mac80211/net/mac80211/ieee80211_rate.h 2007-11-11 15:45:30.445905621 +0100
@@ -65,6 +65,9 @@
struct kref kref;
};
+/* default 'simple' algorithm */
+extern struct rate_control_ops mac80211_rcsimple;
+
int ieee80211_rate_control_register(struct rate_control_ops *ops);
void ieee80211_rate_control_unregister(struct rate_control_ops *ops);
Index: mac80211/net/mac80211/ieee80211_sta.c
===================================================================
--- mac80211.orig/net/mac80211/ieee80211_sta.c 2007-11-11 15:45:23.217493699 +0100
+++ mac80211/net/mac80211/ieee80211_sta.c 2007-11-11 15:46:32.885463850 +0100
@@ -12,7 +12,6 @@
*/
/* TODO:
- * BSS table: use <BSSID,SSID> as the key to support multi-SSID APs
* order BSS list by RSSI(?) ("quality of AP")
* scan result table filtering (by capability (privacy, IBSS/BSS, WPA/RSN IE,
* SSID)
@@ -61,7 +60,8 @@
static void ieee80211_send_probe_req(struct net_device *dev, u8 *dst,
u8 *ssid, size_t ssid_len);
static struct ieee80211_sta_bss *
-ieee80211_rx_bss_get(struct net_device *dev, u8 *bssid);
+ieee80211_rx_bss_get(struct net_device *dev, u8 *bssid, int channel,
+ u8 *ssid, u8 ssid_len);
static void ieee80211_rx_bss_put(struct net_device *dev,
struct ieee80211_sta_bss *bss);
static int ieee80211_sta_find_ibss(struct net_device *dev,
@@ -108,14 +108,11 @@
u8 wmm_param_len;
};
-enum ParseRes { ParseOK = 0, ParseUnknown = 1, ParseFailed = -1 };
-
-static enum ParseRes ieee802_11_parse_elems(u8 *start, size_t len,
- struct ieee802_11_elems *elems)
+static void ieee802_11_parse_elems(u8 *start, size_t len,
+ struct ieee802_11_elems *elems)
{
size_t left = len;
u8 *pos = start;
- int unknown = 0;
memset(elems, 0, sizeof(*elems));
@@ -126,15 +123,8 @@
elen = *pos++;
left -= 2;
- if (elen > left) {
-#if 0
- if (net_ratelimit())
- printk(KERN_DEBUG "IEEE 802.11 element parse "
- "failed (id=%d elen=%d left=%d)\n",
- id, elen, left);
-#endif
- return ParseFailed;
- }
+ if (elen > left)
+ return;
switch (id) {
case WLAN_EID_SSID:
@@ -201,28 +191,15 @@
elems->ext_supp_rates_len = elen;
break;
default:
-#if 0
- printk(KERN_DEBUG "IEEE 802.11 element parse ignored "
- "unknown element (id=%d elen=%d)\n",
- id, elen);
-#endif
- unknown++;
break;
}
left -= elen;
pos += elen;
}
-
- /* Do not trigger error if left == 1 as Apple Airport base stations
- * send AssocResps that are one spurious byte too long. */
-
- return unknown ? ParseUnknown : ParseOK;
}
-
-
static int ecw2cw(int ecw)
{
int cw = 1;
@@ -426,7 +403,9 @@
if (sdata->type != IEEE80211_IF_TYPE_STA)
return;
- bss = ieee80211_rx_bss_get(dev, ifsta->bssid);
+ bss = ieee80211_rx_bss_get(dev, ifsta->bssid,
+ local->hw.conf.channel,
+ ifsta->ssid, ifsta->ssid_len);
if (bss) {
if (bss->has_erp_value)
ieee80211_handle_erp_ie(dev, bss->erp_value);
@@ -571,7 +550,8 @@
capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME |
WLAN_CAPABILITY_SHORT_PREAMBLE;
}
- bss = ieee80211_rx_bss_get(dev, ifsta->bssid);
+ bss = ieee80211_rx_bss_get(dev, ifsta->bssid, local->hw.conf.channel,
+ ifsta->ssid, ifsta->ssid_len);
if (bss) {
if (bss->capability & WLAN_CAPABILITY_PRIVACY)
capab |= WLAN_CAPABILITY_PRIVACY;
@@ -719,24 +699,30 @@
static int ieee80211_privacy_mismatch(struct net_device *dev,
struct ieee80211_if_sta *ifsta)
{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sta_bss *bss;
- int res = 0;
+ int bss_privacy;
+ int wep_privacy;
+ int privacy_invoked;
- if (!ifsta || (ifsta->flags & IEEE80211_STA_MIXED_CELL) ||
- ifsta->key_management_enabled)
+ if (!ifsta || (ifsta->flags & IEEE80211_STA_MIXED_CELL))
return 0;
- bss = ieee80211_rx_bss_get(dev, ifsta->bssid);
+ bss = ieee80211_rx_bss_get(dev, ifsta->bssid, local->hw.conf.channel,
+ ifsta->ssid, ifsta->ssid_len);
if (!bss)
return 0;
- if (ieee80211_sta_wep_configured(dev) !=
- !!(bss->capability & WLAN_CAPABILITY_PRIVACY))
- res = 1;
+ bss_privacy = !!(bss->capability & WLAN_CAPABILITY_PRIVACY);
+ wep_privacy = !!ieee80211_sta_wep_configured(dev);
+ privacy_invoked = !!(ifsta->flags & IEEE80211_STA_PRIVACY_INVOKED);
ieee80211_rx_bss_put(dev, bss);
- return res;
+ if ((bss_privacy == wep_privacy) || (bss_privacy == privacy_invoked))
+ return 0;
+
+ return 1;
}
@@ -920,12 +906,7 @@
printk(KERN_DEBUG "%s: replying to auth challenge\n", dev->name);
pos = mgmt->u.auth.variable;
- if (ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems)
- == ParseFailed) {
- printk(KERN_DEBUG "%s: failed to parse Auth(challenge)\n",
- dev->name);
- return;
- }
+ ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems);
if (!elems.challenge) {
printk(KERN_DEBUG "%s: no challenge IE in shared key auth "
"frame\n", dev->name);
@@ -1214,12 +1195,7 @@
}
pos = mgmt->u.assoc_resp.variable;
- if (ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems)
- == ParseFailed) {
- printk(KERN_DEBUG "%s: failed to parse AssocResp\n",
- dev->name);
- return;
- }
+ ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems);
if (!elems.supp_rates) {
printk(KERN_DEBUG "%s: no SuppRates element in AssocResp\n",
@@ -1231,7 +1207,9 @@
* update our stored copy */
if (elems.erp_info && elems.erp_info_len >= 1) {
struct ieee80211_sta_bss *bss
- = ieee80211_rx_bss_get(dev, ifsta->bssid);
+ = ieee80211_rx_bss_get(dev, ifsta->bssid,
+ local->hw.conf.channel,
+ ifsta->ssid, ifsta->ssid_len);
if (bss) {
bss->erp_value = elems.erp_info[0];
bss->has_erp_value = 1;
@@ -1261,7 +1239,9 @@
" AP\n", dev->name);
return;
}
- bss = ieee80211_rx_bss_get(dev, ifsta->bssid);
+ bss = ieee80211_rx_bss_get(dev, ifsta->bssid,
+ local->hw.conf.channel,
+ ifsta->ssid, ifsta->ssid_len);
if (bss) {
sta->last_rssi = bss->rssi;
sta->last_signal = bss->signal;
@@ -1337,7 +1317,8 @@
static struct ieee80211_sta_bss *
-ieee80211_rx_bss_add(struct net_device *dev, u8 *bssid)
+ieee80211_rx_bss_add(struct net_device *dev, u8 *bssid, int channel,
+ u8 *ssid, u8 ssid_len)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sta_bss *bss;
@@ -1348,6 +1329,11 @@
atomic_inc(&bss->users);
atomic_inc(&bss->users);
memcpy(bss->bssid, bssid, ETH_ALEN);
+ bss->channel = channel;
+ if (ssid && ssid_len <= IEEE80211_MAX_SSID_LEN) {
+ memcpy(bss->ssid, ssid, ssid_len);
+ bss->ssid_len = ssid_len;
+ }
spin_lock_bh(&local->sta_bss_lock);
/* TODO: order by RSSI? */
@@ -1359,7 +1345,8 @@
static struct ieee80211_sta_bss *
-ieee80211_rx_bss_get(struct net_device *dev, u8 *bssid)
+ieee80211_rx_bss_get(struct net_device *dev, u8 *bssid, int channel,
+ u8 *ssid, u8 ssid_len)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sta_bss *bss;
@@ -1367,7 +1354,10 @@
spin_lock_bh(&local->sta_bss_lock);
bss = local->sta_bss_hash[STA_HASH(bssid)];
while (bss) {
- if (memcmp(bss->bssid, bssid, ETH_ALEN) == 0) {
+ if (!memcmp(bss->bssid, bssid, ETH_ALEN) &&
+ bss->channel == channel &&
+ bss->ssid_len == ssid_len &&
+ (ssid_len == 0 || !memcmp(bss->ssid, ssid, ssid_len))) {
atomic_inc(&bss->users);
break;
}
@@ -1429,7 +1419,7 @@
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee802_11_elems elems;
size_t baselen;
- int channel, invalid = 0, clen;
+ int channel, clen;
struct ieee80211_sta_bss *bss;
struct sta_info *sta;
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
@@ -1473,9 +1463,7 @@
#endif /* CONFIG_MAC80211_IBSS_DEBUG */
}
- if (ieee802_11_parse_elems(mgmt->u.beacon.variable, len - baselen,
- &elems) == ParseFailed)
- invalid = 1;
+ ieee802_11_parse_elems(mgmt->u.beacon.variable, len - baselen, &elems);
if (sdata->type == IEEE80211_IF_TYPE_IBSS && elems.supp_rates &&
memcmp(mgmt->bssid, sdata->u.sta.bssid, ETH_ALEN) == 0 &&
@@ -1533,9 +1521,11 @@
else
channel = rx_status->channel;
- bss = ieee80211_rx_bss_get(dev, mgmt->bssid);
+ bss = ieee80211_rx_bss_get(dev, mgmt->bssid, channel,
+ elems.ssid, elems.ssid_len);
if (!bss) {
- bss = ieee80211_rx_bss_add(dev, mgmt->bssid);
+ bss = ieee80211_rx_bss_add(dev, mgmt->bssid, channel,
+ elems.ssid, elems.ssid_len);
if (!bss)
return;
} else {
@@ -1561,10 +1551,6 @@
bss->beacon_int = le16_to_cpu(mgmt->u.beacon.beacon_int);
bss->capability = le16_to_cpu(mgmt->u.beacon.capab_info);
- if (elems.ssid && elems.ssid_len <= IEEE80211_MAX_SSID_LEN) {
- memcpy(bss->ssid, elems.ssid, elems.ssid_len);
- bss->ssid_len = elems.ssid_len;
- }
bss->supp_rates_len = 0;
if (elems.supp_rates) {
@@ -1635,7 +1621,6 @@
bss->hw_mode = rx_status->phymode;
- bss->channel = channel;
bss->freq = rx_status->freq;
if (channel != rx_status->channel &&
(bss->hw_mode == MODE_IEEE80211G ||
@@ -1695,9 +1680,7 @@
if (baselen > len)
return;
- if (ieee802_11_parse_elems(mgmt->u.beacon.variable, len - baselen,
- &elems) == ParseFailed)
- return;
+ ieee802_11_parse_elems(mgmt->u.beacon.variable, len - baselen, &elems);
if (elems.erp_info && elems.erp_info_len >= 1)
ieee80211_handle_erp_ie(dev, elems.erp_info[0]);
@@ -2098,7 +2081,8 @@
{
int tmp, hidden_ssid;
- if (!memcmp(ifsta->ssid, ssid, ssid_len))
+ if (ssid_len == ifsta->ssid_len &&
+ !memcmp(ifsta->ssid, ssid, ssid_len))
return 1;
if (ifsta->flags & IEEE80211_STA_AUTO_BSSID_SEL)
@@ -2357,7 +2341,7 @@
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sta_bss *bss;
- struct ieee80211_sub_if_data *sdata;
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_hw_mode *mode;
u8 bssid[ETH_ALEN], *pos;
int i;
@@ -2379,18 +2363,17 @@
printk(KERN_DEBUG "%s: Creating new IBSS network, BSSID " MAC_FMT "\n",
dev->name, MAC_ARG(bssid));
- bss = ieee80211_rx_bss_add(dev, bssid);
+ bss = ieee80211_rx_bss_add(dev, bssid, local->hw.conf.channel,
+ sdata->u.sta.ssid, sdata->u.sta.ssid_len);
if (!bss)
return -ENOMEM;
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
mode = local->oper_hw_mode;
if (local->hw.conf.beacon_int == 0)
local->hw.conf.beacon_int = 100;
bss->beacon_int = local->hw.conf.beacon_int;
bss->hw_mode = local->hw.conf.phymode;
- bss->channel = local->hw.conf.channel;
bss->freq = local->hw.conf.freq;
bss->last_update = jiffies;
bss->capability = WLAN_CAPABILITY_IBSS;
@@ -2448,7 +2431,8 @@
MAC_FMT "\n", MAC_ARG(bssid), MAC_ARG(ifsta->bssid));
#endif /* CONFIG_MAC80211_IBSS_DEBUG */
if (found && memcmp(ifsta->bssid, bssid, ETH_ALEN) != 0 &&
- (bss = ieee80211_rx_bss_get(dev, bssid))) {
+ (bss = ieee80211_rx_bss_get(dev, bssid, local->hw.conf.channel,
+ ifsta->ssid, ifsta->ssid_len))) {
printk(KERN_DEBUG "%s: Selected IBSS BSSID " MAC_FMT
" based on configured SSID\n",
dev->name, MAC_ARG(bssid));
Index: mac80211/net/mac80211/Kconfig
===================================================================
--- mac80211.orig/net/mac80211/Kconfig 2007-11-11 15:45:23.225494151 +0100
+++ mac80211/net/mac80211/Kconfig 2007-11-11 15:45:30.449905846 +0100
@@ -13,6 +13,18 @@
This option enables the hardware independent IEEE 802.11
networking stack.
+config MAC80211_RCSIMPLE
+ bool "'simple' rate control algorithm" if EMBEDDED
+ default y
+ depends on MAC80211
+ help
+ This option allows you to turn off the 'simple' rate
+ control algorithm in mac80211. If you do turn it off,
+ you absolutely need another rate control algorithm.
+
+ Say Y unless you know you will have another algorithm
+ available.
+
config MAC80211_LEDS
bool "Enable LED triggers"
depends on MAC80211 && LEDS_TRIGGERS
Index: mac80211/net/mac80211/Makefile
===================================================================
--- mac80211.orig/net/mac80211/Makefile 2007-11-11 15:45:23.233494609 +0100
+++ mac80211/net/mac80211/Makefile 2007-11-11 15:45:30.449905846 +0100
@@ -1,8 +1,9 @@
-obj-$(CONFIG_MAC80211) += mac80211.o rc80211_simple.o
+obj-$(CONFIG_MAC80211) += mac80211.o
mac80211-objs-$(CONFIG_MAC80211_LEDS) += ieee80211_led.o
mac80211-objs-$(CONFIG_MAC80211_DEBUGFS) += debugfs.o debugfs_sta.o debugfs_netdev.o debugfs_key.o
mac80211-objs-$(CONFIG_NET_SCHED) += wme.o
+mac80211-objs-$(CONFIG_MAC80211_RCSIMPLE) += rc80211_simple.o
mac80211-objs := \
ieee80211.o \
Index: mac80211/net/mac80211/rc80211_simple.c
===================================================================
--- mac80211.orig/net/mac80211/rc80211_simple.c 2007-11-11 15:45:23.237494839 +0100
+++ mac80211/net/mac80211/rc80211_simple.c 2007-11-11 15:45:30.449905846 +0100
@@ -7,7 +7,6 @@
* published by the Free Software Foundation.
*/
-#include <linux/module.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/types.h>
@@ -29,8 +28,6 @@
#define RATE_CONTROL_INTERVAL (HZ / 20)
#define RATE_CONTROL_MIN_TX 10
-MODULE_ALIAS("rc80211_default");
-
static void rate_control_rate_inc(struct ieee80211_local *local,
struct sta_info *sta)
{
@@ -393,8 +390,7 @@
}
#endif
-static struct rate_control_ops rate_control_simple = {
- .module = THIS_MODULE,
+struct rate_control_ops mac80211_rcsimple = {
.name = "simple",
.tx_status = rate_control_simple_tx_status,
.get_rate = rate_control_simple_get_rate,
@@ -409,22 +405,3 @@
.remove_sta_debugfs = rate_control_simple_remove_sta_debugfs,
#endif
};
-
-
-static int __init rate_control_simple_init(void)
-{
- return ieee80211_rate_control_register(&rate_control_simple);
-}
-
-
-static void __exit rate_control_simple_exit(void)
-{
- ieee80211_rate_control_unregister(&rate_control_simple);
-}
-
-
-subsys_initcall(rate_control_simple_init);
-module_exit(rate_control_simple_exit);
-
-MODULE_DESCRIPTION("Simple rate control algorithm for ieee80211");
-MODULE_LICENSE("GPL");
Index: mac80211/net/mac80211/rx.c
===================================================================
--- mac80211.orig/net/mac80211/rx.c 2007-11-11 15:45:23.245495291 +0100
+++ mac80211/net/mac80211/rx.c 2007-11-11 15:45:30.449905846 +0100
@@ -509,9 +509,11 @@
rx->key->tx_rx_count++;
/* TODO: add threshold stuff again */
} else {
+#ifdef CONFIG_MAC80211_DEBUG
if (net_ratelimit())
printk(KERN_DEBUG "%s: RX protected frame,"
" but have no key\n", rx->dev->name);
+#endif /* CONFIG_MAC80211_DEBUG */
return TXRX_DROP;
}
Index: mac80211/net/mac80211/wep.c
===================================================================
--- mac80211.orig/net/mac80211/wep.c 2007-11-11 15:45:23.253495749 +0100
+++ mac80211/net/mac80211/wep.c 2007-11-11 15:45:30.449905846 +0100
@@ -16,7 +16,7 @@
#include <linux/crypto.h>
#include <linux/err.h>
#include <linux/mm.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
@@ -138,9 +138,7 @@
*icv = cpu_to_le32(~crc32_le(~0, data, data_len));
crypto_blkcipher_setkey(tfm, rc4key, klen);
- sg.page = virt_to_page(data);
- sg.offset = offset_in_page(data);
- sg.length = data_len + WEP_ICV_LEN;
+ sg_init_one(&sg, data, data_len + WEP_ICV_LEN);
crypto_blkcipher_encrypt(&desc, &sg, &sg, sg.length);
}
@@ -204,9 +202,7 @@
__le32 crc;
crypto_blkcipher_setkey(tfm, rc4key, klen);
- sg.page = virt_to_page(data);
- sg.offset = offset_in_page(data);
- sg.length = data_len + WEP_ICV_LEN;
+ sg_init_one(&sg, data, data_len + WEP_ICV_LEN);
crypto_blkcipher_decrypt(&desc, &sg, &sg, sg.length);
crc = cpu_to_le32(~crc32_le(~0, data, data_len));
@@ -318,9 +314,11 @@
if (!(rx->u.rx.status->flag & RX_FLAG_DECRYPTED)) {
if (ieee80211_wep_decrypt(rx->local, rx->skb, rx->key)) {
+#ifdef CONFIG_MAC80211_DEBUG
if (net_ratelimit())
printk(KERN_DEBUG "%s: RX WEP frame, decrypt "
"failed\n", rx->dev->name);
+#endif /* CONFIG_MAC80211_DEBUG */
return TXRX_DROP;
}
} else if (!(rx->u.rx.status->flag & RX_FLAG_IV_STRIPPED)) {
Index: mac80211/net/wireless/Kconfig
===================================================================
--- mac80211.orig/net/wireless/Kconfig 2007-11-11 15:45:23.261496205 +0100
+++ mac80211/net/wireless/Kconfig 2007-11-11 15:45:30.453906075 +0100
@@ -3,7 +3,7 @@
config NL80211
bool "nl80211 new netlink interface support"
- depends CFG80211
+ depends on CFG80211
default y
---help---
This option turns on the new netlink interface